From 7d5fc85d961b807c799786afd175f5d964a2109f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jun 2014 11:04:32 +0300 Subject: [PATCH] clk: ti: set CLK_SET_RATE_NO_REPARENT for ti,mux-clock When setting the rate of a clock, by default the clock framework will change the parent of the clock to the most suitable one in __clk_mux_determine_rate() (most suitable by looking at the clock rate). This is a rather dangerous default, and causes problems on AM43x when using display and ethernet. There are multiple ways to select the clock muxes on AM43x, and some of those clock paths have the same source clocks for display and ethernet. When changing the clock rate for the display subsystem, the clock framework decides to change the display mux from the dedicated display PLL to a shared PLL which is used by the ethernet, and then changes the rate of the shared PLL, breaking the ethernet. As I don't think there ever is a case where we want the clock framework to automatically change the parent clock of a clock mux, this patch sets the CLK_SET_RATE_NO_REPARENT for all ti,mux-clocks. Signed-off-by: Tomi Valkeinen Reviewed-by: Paul Walmsley Tested-by: Felipe Balbi Signed-off-by: Tero Kristo --- drivers/clk/ti/mux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c index 0197a478720c..e9d650e51287 100644 --- a/drivers/clk/ti/mux.c +++ b/drivers/clk/ti/mux.c @@ -160,7 +160,7 @@ static void of_mux_clk_setup(struct device_node *node) u8 clk_mux_flags = 0; u32 mask = 0; u32 shift = 0; - u32 flags = 0; + u32 flags = CLK_SET_RATE_NO_REPARENT; num_parents = of_clk_get_parent_count(node); if (num_parents < 2) {