ARM: shmobile: koelsch: Remove legacy C board code
All features supported by the Koelsch legacy C board code are now supported by the multiplatform code, it's thus time to say bye to the legacy code. Nobody should miss it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This commit is contained in:
parent
b6c461d279
commit
7d6a399cf7
|
@ -1,113 +0,0 @@
|
|||
CONFIG_SYSVIPC=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_IKCONFIG=y
|
||||
CONFIG_IKCONFIG_PROC=y
|
||||
CONFIG_LOG_BUF_SHIFT=16
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
CONFIG_SYSCTL_SYSCALL=y
|
||||
CONFIG_EMBEDDED=y
|
||||
CONFIG_PERF_EVENTS=y
|
||||
CONFIG_SLAB=y
|
||||
CONFIG_ARCH_SHMOBILE_LEGACY=y
|
||||
CONFIG_ARCH_R8A7791=y
|
||||
CONFIG_MACH_KOELSCH=y
|
||||
# CONFIG_SWP_EMULATE is not set
|
||||
CONFIG_CPU_BPREDICT_DISABLE=y
|
||||
CONFIG_PL310_ERRATA_588369=y
|
||||
CONFIG_ARM_ERRATA_754322=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCI_RCAR_GEN2=y
|
||||
CONFIG_PCI_RCAR_GEN2_PCIE=y
|
||||
CONFIG_SMP=y
|
||||
CONFIG_SCHED_MC=y
|
||||
CONFIG_NR_CPUS=8
|
||||
CONFIG_AEABI=y
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x0
|
||||
CONFIG_ZBOOT_ROM_BSS=0x0
|
||||
CONFIG_ARM_APPENDED_DTB=y
|
||||
CONFIG_KEXEC=y
|
||||
CONFIG_AUTO_ZRELADDR=y
|
||||
CONFIG_VFP=y
|
||||
CONFIG_NEON=y
|
||||
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
|
||||
CONFIG_PM_RUNTIME=y
|
||||
CONFIG_NET=y
|
||||
CONFIG_PACKET=y
|
||||
CONFIG_UNIX=y
|
||||
CONFIG_INET=y
|
||||
CONFIG_IP_PNP=y
|
||||
CONFIG_IP_PNP_DHCP=y
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_ATA=y
|
||||
CONFIG_SATA_RCAR=y
|
||||
CONFIG_MTD=y
|
||||
CONFIG_MTD_M25P80=y
|
||||
CONFIG_MTD_SPI_NOR=y
|
||||
CONFIG_EEPROM_AT24=y
|
||||
CONFIG_NETDEVICES=y
|
||||
# CONFIG_NET_VENDOR_ARC is not set
|
||||
# CONFIG_NET_CADENCE is not set
|
||||
# CONFIG_NET_VENDOR_BROADCOM is not set
|
||||
# CONFIG_NET_VENDOR_CIRRUS is not set
|
||||
# CONFIG_NET_VENDOR_FARADAY is not set
|
||||
# CONFIG_NET_VENDOR_INTEL is not set
|
||||
# CONFIG_NET_VENDOR_MARVELL is not set
|
||||
# CONFIG_NET_VENDOR_MICREL is not set
|
||||
# CONFIG_NET_VENDOR_NATSEMI is not set
|
||||
CONFIG_SH_ETH=y
|
||||
# CONFIG_NET_VENDOR_SEEQ is not set
|
||||
# CONFIG_NET_VENDOR_SMSC is not set
|
||||
# CONFIG_NET_VENDOR_STMICRO is not set
|
||||
# CONFIG_NET_VENDOR_VIA is not set
|
||||
# CONFIG_NET_VENDOR_WIZNET is not set
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_KEYBOARD_GPIO=y
|
||||
# CONFIG_INPUT_MOUSE is not set
|
||||
# CONFIG_LEGACY_PTYS is not set
|
||||
CONFIG_SERIAL_SH_SCI=y
|
||||
CONFIG_SERIAL_SH_SCI_NR_UARTS=20
|
||||
CONFIG_SERIAL_SH_SCI_CONSOLE=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_MUX=y
|
||||
CONFIG_I2C_SH_MOBILE=y
|
||||
CONFIG_I2C_RCAR=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_RSPI=y
|
||||
CONFIG_SPI_SH_MSIOF=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_RCAR=y
|
||||
# CONFIG_HWMON is not set
|
||||
CONFIG_THERMAL=y
|
||||
CONFIG_RCAR_THERMAL=y
|
||||
CONFIG_REGULATOR=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
CONFIG_REGULATOR_DA9210=y
|
||||
CONFIG_REGULATOR_GPIO=y
|
||||
CONFIG_MEDIA_SUPPORT=y
|
||||
CONFIG_MEDIA_CAMERA_SUPPORT=y
|
||||
CONFIG_V4L_PLATFORM_DRIVERS=y
|
||||
CONFIG_SOC_CAMERA=y
|
||||
CONFIG_SOC_CAMERA_PLATFORM=y
|
||||
CONFIG_VIDEO_RCAR_VIN=y
|
||||
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
|
||||
CONFIG_VIDEO_ADV7180=y
|
||||
# CONFIG_HID is not set
|
||||
# CONFIG_USB_SUPPORT is not set
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_SDHI=y
|
||||
CONFIG_NEW_LEDS=y
|
||||
CONFIG_LEDS_CLASS=y
|
||||
CONFIG_LEDS_GPIO=y
|
||||
# CONFIG_IOMMU_SUPPORT is not set
|
||||
# CONFIG_DNOTIFY is not set
|
||||
CONFIG_TMPFS=y
|
||||
CONFIG_CONFIGFS_FS=y
|
||||
# CONFIG_MISC_FILESYSTEMS is not set
|
||||
CONFIG_NFS_FS=y
|
||||
CONFIG_ROOT_NFS=y
|
||||
# CONFIG_ENABLE_WARN_DEPRECATED is not set
|
||||
# CONFIG_ENABLE_MUST_CHECK is not set
|
||||
# CONFIG_ARM_UNWIND is not set
|
|
@ -227,12 +227,6 @@ config MACH_LAGER
|
|||
select MICREL_PHY if SH_ETH
|
||||
select SND_SOC_AK4642 if SND_SIMPLE_CARD
|
||||
|
||||
config MACH_KOELSCH
|
||||
bool "Koelsch board"
|
||||
depends on ARCH_R8A7791
|
||||
select USE_OF
|
||||
select MICREL_PHY if SH_ETH
|
||||
|
||||
config MACH_KZM9G
|
||||
bool "KZM-A9-GT board"
|
||||
depends on ARCH_SH73A0
|
||||
|
|
|
@ -69,7 +69,6 @@ obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o
|
|||
obj-$(CONFIG_MACH_MARZEN) += board-marzen.o
|
||||
obj-$(CONFIG_MACH_LAGER) += board-lager.o
|
||||
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
|
||||
obj-$(CONFIG_MACH_KOELSCH) += board-koelsch.o
|
||||
obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
|
||||
obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
|
||||
endif
|
||||
|
|
|
@ -1,523 +0,0 @@
|
|||
/*
|
||||
* Koelsch board support
|
||||
*
|
||||
* Copyright (C) 2013 Renesas Electronics Corporation
|
||||
* Copyright (C) 2013-2014 Renesas Solutions Corp.
|
||||
* Copyright (C) 2013 Magnus Damm
|
||||
* Copyright (C) 2014 Cogent Embedded, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/gpio_keys.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/leds.h>
|
||||
#include <linux/mfd/tmio.h>
|
||||
#include <linux/mmc/host.h>
|
||||
#include <linux/mmc/sh_mobile_sdhi.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/phy.h>
|
||||
#include <linux/pinctrl/machine.h>
|
||||
#include <linux/platform_data/gpio-rcar.h>
|
||||
#include <linux/platform_data/rcar-du.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/fixed.h>
|
||||
#include <linux/regulator/gpio-regulator.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/sh_eth.h>
|
||||
#include <linux/spi/flash.h>
|
||||
#include <linux/spi/rspi.h>
|
||||
#include <linux/spi/spi.h>
|
||||
|
||||
#include <asm/mach-types.h>
|
||||
#include <asm/mach/arch.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "irqs.h"
|
||||
#include "r8a7791.h"
|
||||
#include "rcar-gen2.h"
|
||||
|
||||
/* DU */
|
||||
static struct rcar_du_encoder_data koelsch_du_encoders[] = {
|
||||
{
|
||||
.type = RCAR_DU_ENCODER_NONE,
|
||||
.output = RCAR_DU_OUTPUT_LVDS0,
|
||||
.connector.lvds.panel = {
|
||||
.width_mm = 210,
|
||||
.height_mm = 158,
|
||||
.mode = {
|
||||
.pixelclock = 65000000,
|
||||
.hactive = 1024,
|
||||
.hfront_porch = 20,
|
||||
.hback_porch = 160,
|
||||
.hsync_len = 136,
|
||||
.vactive = 768,
|
||||
.vfront_porch = 3,
|
||||
.vback_porch = 29,
|
||||
.vsync_len = 6,
|
||||
},
|
||||
},
|
||||
},
|
||||
};
|
||||
|
||||
static const struct rcar_du_platform_data koelsch_du_pdata __initconst = {
|
||||
.encoders = koelsch_du_encoders,
|
||||
.num_encoders = ARRAY_SIZE(koelsch_du_encoders),
|
||||
};
|
||||
|
||||
static const struct resource du_resources[] __initconst = {
|
||||
DEFINE_RES_MEM(0xfeb00000, 0x40000),
|
||||
DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
|
||||
DEFINE_RES_IRQ(gic_spi(256)),
|
||||
DEFINE_RES_IRQ(gic_spi(268)),
|
||||
};
|
||||
|
||||
static void __init koelsch_add_du_device(void)
|
||||
{
|
||||
struct platform_device_info info = {
|
||||
.name = "rcar-du-r8a7791",
|
||||
.id = -1,
|
||||
.res = du_resources,
|
||||
.num_res = ARRAY_SIZE(du_resources),
|
||||
.data = &koelsch_du_pdata,
|
||||
.size_data = sizeof(koelsch_du_pdata),
|
||||
.dma_mask = DMA_BIT_MASK(32),
|
||||
};
|
||||
|
||||
platform_device_register_full(&info);
|
||||
}
|
||||
|
||||
/* Ether */
|
||||
static const struct sh_eth_plat_data ether_pdata __initconst = {
|
||||
.phy = 0x1,
|
||||
.phy_irq = irq_pin(0),
|
||||
.edmac_endian = EDMAC_LITTLE_ENDIAN,
|
||||
.phy_interface = PHY_INTERFACE_MODE_RMII,
|
||||
.ether_link_active_low = 1,
|
||||
};
|
||||
|
||||
static const struct resource ether_resources[] __initconst = {
|
||||
DEFINE_RES_MEM(0xee700000, 0x400),
|
||||
DEFINE_RES_IRQ(gic_spi(162)),
|
||||
};
|
||||
|
||||
static const struct platform_device_info ether_info __initconst = {
|
||||
.name = "r8a7791-ether",
|
||||
.id = -1,
|
||||
.res = ether_resources,
|
||||
.num_res = ARRAY_SIZE(ether_resources),
|
||||
.data = ðer_pdata,
|
||||
.size_data = sizeof(ether_pdata),
|
||||
.dma_mask = DMA_BIT_MASK(32),
|
||||
};
|
||||
|
||||
/* LEDS */
|
||||
static struct gpio_led koelsch_leds[] = {
|
||||
{
|
||||
.name = "led8",
|
||||
.gpio = RCAR_GP_PIN(2, 21),
|
||||
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
||||
}, {
|
||||
.name = "led7",
|
||||
.gpio = RCAR_GP_PIN(2, 20),
|
||||
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
||||
}, {
|
||||
.name = "led6",
|
||||
.gpio = RCAR_GP_PIN(2, 19),
|
||||
.default_state = LEDS_GPIO_DEFSTATE_ON,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct gpio_led_platform_data koelsch_leds_pdata __initconst = {
|
||||
.leds = koelsch_leds,
|
||||
.num_leds = ARRAY_SIZE(koelsch_leds),
|
||||
};
|
||||
|
||||
/* GPIO KEY */
|
||||
#define GPIO_KEY(c, g, d, ...) \
|
||||
{ .code = c, .gpio = g, .desc = d, .active_low = 1, \
|
||||
.wakeup = 1, .debounce_interval = 20 }
|
||||
|
||||
static struct gpio_keys_button gpio_buttons[] = {
|
||||
GPIO_KEY(KEY_4, RCAR_GP_PIN(5, 3), "SW2-pin4"),
|
||||
GPIO_KEY(KEY_3, RCAR_GP_PIN(5, 2), "SW2-pin3"),
|
||||
GPIO_KEY(KEY_2, RCAR_GP_PIN(5, 1), "SW2-pin2"),
|
||||
GPIO_KEY(KEY_1, RCAR_GP_PIN(5, 0), "SW2-pin1"),
|
||||
GPIO_KEY(KEY_G, RCAR_GP_PIN(7, 6), "SW36"),
|
||||
GPIO_KEY(KEY_F, RCAR_GP_PIN(7, 5), "SW35"),
|
||||
GPIO_KEY(KEY_E, RCAR_GP_PIN(7, 4), "SW34"),
|
||||
GPIO_KEY(KEY_D, RCAR_GP_PIN(7, 3), "SW33"),
|
||||
GPIO_KEY(KEY_C, RCAR_GP_PIN(7, 2), "SW32"),
|
||||
GPIO_KEY(KEY_B, RCAR_GP_PIN(7, 1), "SW31"),
|
||||
GPIO_KEY(KEY_A, RCAR_GP_PIN(7, 0), "SW30"),
|
||||
};
|
||||
|
||||
static const struct gpio_keys_platform_data koelsch_keys_pdata __initconst = {
|
||||
.buttons = gpio_buttons,
|
||||
.nbuttons = ARRAY_SIZE(gpio_buttons),
|
||||
};
|
||||
|
||||
/* QSPI */
|
||||
static const struct resource qspi_resources[] __initconst = {
|
||||
DEFINE_RES_MEM(0xe6b10000, 0x1000),
|
||||
DEFINE_RES_IRQ_NAMED(gic_spi(184), "mux"),
|
||||
};
|
||||
|
||||
static const struct rspi_plat_data qspi_pdata __initconst = {
|
||||
.num_chipselect = 1,
|
||||
};
|
||||
|
||||
/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64 MiB) */
|
||||
static struct mtd_partition spi_flash_part[] = {
|
||||
{
|
||||
.name = "loader",
|
||||
.offset = 0x00000000,
|
||||
.size = 512 * 1024,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
},
|
||||
{
|
||||
.name = "bootenv",
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.size = 512 * 1024,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
},
|
||||
{
|
||||
.name = "data",
|
||||
.offset = MTDPART_OFS_APPEND,
|
||||
.size = MTDPART_SIZ_FULL,
|
||||
},
|
||||
};
|
||||
|
||||
static const struct flash_platform_data spi_flash_data = {
|
||||
.name = "m25p80",
|
||||
.parts = spi_flash_part,
|
||||
.nr_parts = ARRAY_SIZE(spi_flash_part),
|
||||
.type = "s25fl512s",
|
||||
};
|
||||
|
||||
static const struct spi_board_info spi_info[] __initconst = {
|
||||
{
|
||||
.modalias = "m25p80",
|
||||
.platform_data = &spi_flash_data,
|
||||
.mode = SPI_MODE_0 | SPI_TX_QUAD | SPI_RX_QUAD,
|
||||
.max_speed_hz = 30000000,
|
||||
.bus_num = 0,
|
||||
.chip_select = 0,
|
||||
},
|
||||
};
|
||||
|
||||
/* SATA0 */
|
||||
static const struct resource sata0_resources[] __initconst = {
|
||||
DEFINE_RES_MEM(0xee300000, 0x2000),
|
||||
DEFINE_RES_IRQ(gic_spi(105)),
|
||||
};
|
||||
|
||||
static const struct platform_device_info sata0_info __initconst = {
|
||||
.name = "sata-r8a7791",
|
||||
.id = 0,
|
||||
.res = sata0_resources,
|
||||
.num_res = ARRAY_SIZE(sata0_resources),
|
||||
.dma_mask = DMA_BIT_MASK(32),
|
||||
};
|
||||
|
||||
/* I2C */
|
||||
static const struct resource i2c_resources[] __initconst = {
|
||||
/* I2C0 */
|
||||
DEFINE_RES_MEM(0xE6508000, 0x40),
|
||||
DEFINE_RES_IRQ(gic_spi(287)),
|
||||
/* I2C1 */
|
||||
DEFINE_RES_MEM(0xE6518000, 0x40),
|
||||
DEFINE_RES_IRQ(gic_spi(288)),
|
||||
/* I2C2 */
|
||||
DEFINE_RES_MEM(0xE6530000, 0x40),
|
||||
DEFINE_RES_IRQ(gic_spi(286)),
|
||||
/* I2C3 */
|
||||
DEFINE_RES_MEM(0xE6540000, 0x40),
|
||||
DEFINE_RES_IRQ(gic_spi(290)),
|
||||
/* I2C4 */
|
||||
DEFINE_RES_MEM(0xE6520000, 0x40),
|
||||
DEFINE_RES_IRQ(gic_spi(19)),
|
||||
/* I2C5 */
|
||||
DEFINE_RES_MEM(0xE6528000, 0x40),
|
||||
DEFINE_RES_IRQ(gic_spi(20)),
|
||||
};
|
||||
|
||||
static void __init koelsch_add_i2c(unsigned idx)
|
||||
{
|
||||
unsigned res_idx = idx * 2;
|
||||
|
||||
BUG_ON(res_idx >= ARRAY_SIZE(i2c_resources));
|
||||
|
||||
platform_device_register_simple("i2c-rcar_gen2", idx,
|
||||
i2c_resources + res_idx, 2);
|
||||
}
|
||||
|
||||
#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin) \
|
||||
static struct regulator_consumer_supply vcc_sdhi##idx##_consumer = \
|
||||
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx); \
|
||||
\
|
||||
static struct regulator_init_data vcc_sdhi##idx##_init_data = { \
|
||||
.constraints = { \
|
||||
.valid_ops_mask = REGULATOR_CHANGE_STATUS, \
|
||||
}, \
|
||||
.consumer_supplies = &vcc_sdhi##idx##_consumer, \
|
||||
.num_consumer_supplies = 1, \
|
||||
}; \
|
||||
\
|
||||
static const struct fixed_voltage_config vcc_sdhi##idx##_info __initconst = {\
|
||||
.supply_name = "SDHI" #idx "Vcc", \
|
||||
.microvolts = 3300000, \
|
||||
.gpio = vdd_pin, \
|
||||
.enable_high = 1, \
|
||||
.init_data = &vcc_sdhi##idx##_init_data, \
|
||||
}; \
|
||||
\
|
||||
static struct regulator_consumer_supply vccq_sdhi##idx##_consumer = \
|
||||
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx); \
|
||||
\
|
||||
static struct regulator_init_data vccq_sdhi##idx##_init_data = { \
|
||||
.constraints = { \
|
||||
.input_uV = 3300000, \
|
||||
.min_uV = 1800000, \
|
||||
.max_uV = 3300000, \
|
||||
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | \
|
||||
REGULATOR_CHANGE_STATUS, \
|
||||
}, \
|
||||
.consumer_supplies = &vccq_sdhi##idx##_consumer, \
|
||||
.num_consumer_supplies = 1, \
|
||||
}; \
|
||||
\
|
||||
static struct gpio vccq_sdhi##idx##_gpio = \
|
||||
{ vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx }; \
|
||||
\
|
||||
static struct gpio_regulator_state vccq_sdhi##idx##_states[] = { \
|
||||
{ .value = 1800000, .gpios = 0 }, \
|
||||
{ .value = 3300000, .gpios = 1 }, \
|
||||
}; \
|
||||
\
|
||||
static const struct gpio_regulator_config vccq_sdhi##idx##_info __initconst = {\
|
||||
.supply_name = "vqmmc", \
|
||||
.gpios = &vccq_sdhi##idx##_gpio, \
|
||||
.nr_gpios = 1, \
|
||||
.states = vccq_sdhi##idx##_states, \
|
||||
.nr_states = ARRAY_SIZE(vccq_sdhi##idx##_states), \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.init_data = &vccq_sdhi##idx##_init_data, \
|
||||
};
|
||||
|
||||
SDHI_REGULATOR(0, RCAR_GP_PIN(7, 17), RCAR_GP_PIN(2, 12));
|
||||
SDHI_REGULATOR(1, RCAR_GP_PIN(7, 18), RCAR_GP_PIN(2, 13));
|
||||
SDHI_REGULATOR(2, RCAR_GP_PIN(7, 19), RCAR_GP_PIN(2, 26));
|
||||
|
||||
/* SDHI0 */
|
||||
static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
|
||||
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
|
||||
MMC_CAP_POWER_OFF_CARD,
|
||||
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
|
||||
};
|
||||
|
||||
static struct resource sdhi0_resources[] __initdata = {
|
||||
DEFINE_RES_MEM(0xee100000, 0x200),
|
||||
DEFINE_RES_IRQ(gic_spi(165)),
|
||||
};
|
||||
|
||||
/* SDHI1 */
|
||||
static struct sh_mobile_sdhi_info sdhi1_info __initdata = {
|
||||
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
|
||||
MMC_CAP_POWER_OFF_CARD,
|
||||
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
|
||||
};
|
||||
|
||||
static struct resource sdhi1_resources[] __initdata = {
|
||||
DEFINE_RES_MEM(0xee140000, 0x100),
|
||||
DEFINE_RES_IRQ(gic_spi(167)),
|
||||
};
|
||||
|
||||
/* SDHI2 */
|
||||
static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
|
||||
.tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
|
||||
MMC_CAP_POWER_OFF_CARD,
|
||||
.tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
|
||||
TMIO_MMC_WRPROTECT_DISABLE,
|
||||
};
|
||||
|
||||
static struct resource sdhi2_resources[] __initdata = {
|
||||
DEFINE_RES_MEM(0xee160000, 0x100),
|
||||
DEFINE_RES_IRQ(gic_spi(168)),
|
||||
};
|
||||
|
||||
static const struct pinctrl_map koelsch_pinctrl_map[] = {
|
||||
/* DU */
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
|
||||
"du_rgb666", "du"),
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
|
||||
"du_sync", "du"),
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
|
||||
"du_clk_out_0", "du"),
|
||||
/* Ether */
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
|
||||
"eth_link", "eth"),
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
|
||||
"eth_mdio", "eth"),
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
|
||||
"eth_rmii", "eth"),
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
|
||||
"intc_irq0", "intc"),
|
||||
/* QSPI */
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",
|
||||
"qspi_ctrl", "qspi"),
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",
|
||||
"qspi_data4", "qspi"),
|
||||
/* SCIF0 (CN19: DEBUG SERIAL0) */
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791",
|
||||
"scif0_data_d", "scif0"),
|
||||
/* SCIF1 (CN20: DEBUG SERIAL1) */
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7791",
|
||||
"scif1_data_d", "scif1"),
|
||||
/* I2C1 */
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.1", "pfc-r8a7791",
|
||||
"i2c1_e", "i2c1"),
|
||||
/* I2C2 */
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.2", "pfc-r8a7791",
|
||||
"i2c2", "i2c2"),
|
||||
/* I2C4 */
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.4", "pfc-r8a7791",
|
||||
"i2c4_c", "i2c4"),
|
||||
/* SDHI0 */
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
|
||||
"sdhi0_data4", "sdhi0"),
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
|
||||
"sdhi0_ctrl", "sdhi0"),
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
|
||||
"sdhi0_cd", "sdhi0"),
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
|
||||
"sdhi0_wp", "sdhi0"),
|
||||
/* SDHI2 */
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
|
||||
"sdhi1_data4", "sdhi1"),
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
|
||||
"sdhi1_ctrl", "sdhi1"),
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
|
||||
"sdhi1_cd", "sdhi1"),
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
|
||||
"sdhi1_wp", "sdhi1"),
|
||||
/* SDHI2 */
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
|
||||
"sdhi2_data4", "sdhi2"),
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
|
||||
"sdhi2_ctrl", "sdhi2"),
|
||||
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
|
||||
"sdhi2_cd", "sdhi2"),
|
||||
};
|
||||
|
||||
static void __init koelsch_add_standard_devices(void)
|
||||
{
|
||||
r8a7791_clock_init();
|
||||
pinctrl_register_mappings(koelsch_pinctrl_map,
|
||||
ARRAY_SIZE(koelsch_pinctrl_map));
|
||||
r8a7791_pinmux_init();
|
||||
r8a7791_add_standard_devices();
|
||||
platform_device_register_full(ðer_info);
|
||||
platform_device_register_data(NULL, "leds-gpio", -1,
|
||||
&koelsch_leds_pdata,
|
||||
sizeof(koelsch_leds_pdata));
|
||||
platform_device_register_data(NULL, "gpio-keys", -1,
|
||||
&koelsch_keys_pdata,
|
||||
sizeof(koelsch_keys_pdata));
|
||||
platform_device_register_resndata(NULL, "qspi", 0,
|
||||
qspi_resources,
|
||||
ARRAY_SIZE(qspi_resources),
|
||||
&qspi_pdata, sizeof(qspi_pdata));
|
||||
spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
|
||||
|
||||
koelsch_add_du_device();
|
||||
|
||||
platform_device_register_full(&sata0_info);
|
||||
|
||||
koelsch_add_i2c(1);
|
||||
koelsch_add_i2c(2);
|
||||
koelsch_add_i2c(4);
|
||||
koelsch_add_i2c(5);
|
||||
|
||||
platform_device_register_data(NULL, "reg-fixed-voltage", 0,
|
||||
&vcc_sdhi0_info, sizeof(struct fixed_voltage_config));
|
||||
platform_device_register_data(NULL, "reg-fixed-voltage", 1,
|
||||
&vcc_sdhi1_info, sizeof(struct fixed_voltage_config));
|
||||
platform_device_register_data(NULL, "reg-fixed-voltage", 2,
|
||||
&vcc_sdhi2_info, sizeof(struct fixed_voltage_config));
|
||||
platform_device_register_data(NULL, "gpio-regulator", 0,
|
||||
&vccq_sdhi0_info, sizeof(struct gpio_regulator_config));
|
||||
platform_device_register_data(NULL, "gpio-regulator", 1,
|
||||
&vccq_sdhi1_info, sizeof(struct gpio_regulator_config));
|
||||
platform_device_register_data(NULL, "gpio-regulator", 2,
|
||||
&vccq_sdhi2_info, sizeof(struct gpio_regulator_config));
|
||||
|
||||
platform_device_register_resndata(NULL, "sh_mobile_sdhi", 0,
|
||||
sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
|
||||
&sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
|
||||
|
||||
platform_device_register_resndata(NULL, "sh_mobile_sdhi", 1,
|
||||
sdhi1_resources, ARRAY_SIZE(sdhi1_resources),
|
||||
&sdhi1_info, sizeof(struct sh_mobile_sdhi_info));
|
||||
|
||||
platform_device_register_resndata(NULL, "sh_mobile_sdhi", 2,
|
||||
sdhi2_resources, ARRAY_SIZE(sdhi2_resources),
|
||||
&sdhi2_info, sizeof(struct sh_mobile_sdhi_info));
|
||||
|
||||
}
|
||||
|
||||
/*
|
||||
* Ether LEDs on the Koelsch board are named LINK and ACTIVE which corresponds
|
||||
* to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
|
||||
* 14-15. We have to set them back to 01 from the default 00 value each time
|
||||
* the PHY is reset. It's also important because the PHY's LED0 signal is
|
||||
* connected to SoC's ETH_LINK signal and in the PHY's default mode it will
|
||||
* bounce on and off after each packet, which we apparently want to avoid.
|
||||
*/
|
||||
static int koelsch_ksz8041_fixup(struct phy_device *phydev)
|
||||
{
|
||||
u16 phyctrl1 = phy_read(phydev, 0x1e);
|
||||
|
||||
phyctrl1 &= ~0xc000;
|
||||
phyctrl1 |= 0x4000;
|
||||
return phy_write(phydev, 0x1e, phyctrl1);
|
||||
}
|
||||
|
||||
static void __init koelsch_init(void)
|
||||
{
|
||||
koelsch_add_standard_devices();
|
||||
|
||||
irq_set_irq_type(irq_pin(0), IRQ_TYPE_LEVEL_LOW);
|
||||
|
||||
if (IS_ENABLED(CONFIG_PHYLIB))
|
||||
phy_register_fixup_for_id("r8a7791-ether-ff:01",
|
||||
koelsch_ksz8041_fixup);
|
||||
}
|
||||
|
||||
static const char * const koelsch_boards_compat_dt[] __initconst = {
|
||||
"renesas,koelsch",
|
||||
NULL,
|
||||
};
|
||||
|
||||
DT_MACHINE_START(KOELSCH_DT, "koelsch")
|
||||
.smp = smp_ops(r8a7791_smp_ops),
|
||||
.init_early = shmobile_init_delay,
|
||||
.init_time = rcar_gen2_timer_init,
|
||||
.init_machine = koelsch_init,
|
||||
.init_late = shmobile_init_late,
|
||||
.reserve = rcar_gen2_reserve,
|
||||
.dt_compat = koelsch_boards_compat_dt,
|
||||
MACHINE_END
|
Loading…
Reference in a new issue