redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity

MIPS: Alchemy: remove board_init_irq() function.

Browse source 
remove board_init_irq():  On all in-kernel boards it is sufficient to
initialize board interrupts in an arch_initcall by using the default
linux irq functions.

Some small irqmap.c files have been folded into board_setup files.

Run-tested on DB1200; compile-tested on all other affected boards.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Manuel Lauss 2009-10-04 14:55:26 +02:00 committed by Ralf Baechle
parent 95a437966d
commit 7e50b2b741
20 changed files with 192 additions and 348 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

15
arch/mips/alchemy/common/irq.c
View file

@ -40,8 +40,11 @@
static int au1x_ic_settype(unsigned int irq, unsigned int flow_type);
/* per-processor fixed function irqs */
struct au1xxx_irqmap au1xxx_ic0_map[] __initdata = {
struct au1xxx_irqmap {
int im_irq;
int im_type;
int im_request;
} au1xxx_ic0_map[] __initdata = {
#if defined(CONFIG_SOC_AU1000)
{ AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
{ AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 },
@ -547,7 +550,7 @@ spurious:
}
/* setup edge/level and assign request 0/1 */
void __init au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count)
static void __init setup_irqmap(struct au1xxx_irqmap *map, int count)
{
unsigned int bit, irq_nr;
@ -619,11 +622,7 @@ void __init arch_init_irq(void)
/*
* Initialize IC0, which is fixed per processor.
*/
au1xxx_setup_irqmap(au1xxx_ic0_map, ARRAY_SIZE(au1xxx_ic0_map));
/* Boards can register additional (GPIO-based) IRQs.
*/
board_init_irq();
setup_irqmap(au1xxx_ic0_map, ARRAY_SIZE(au1xxx_ic0_map));
set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3);
}

2
arch/mips/alchemy/devboards/db1x00/Makefile
View file

@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
#
obj-y := board_setup.o irqmap.o
obj-y := board_setup.o

51
arch/mips/alchemy/devboards/db1x00/board_setup.c
View file

@ -29,6 +29,7 @@
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/db1x00.h>
@ -36,6 +37,37 @@
#include <prom.h>
#ifdef CONFIG_MIPS_DB1500
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_BOSPORUS
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_MIRAGE
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
[12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
[13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
};
#endif
#ifdef CONFIG_MIPS_DB1550
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
#endif
const char *get_system_type(void)
{
#ifdef CONFIG_MIPS_BOSPORUS
@ -149,3 +181,22 @@ void __init board_setup(void)
au_sync();
}
static int __init db1x00_init_irq(void)
{
#if defined(CONFIG_MIPS_MIRAGE)
set_irq_type(AU1000_GPIO_7, IRQF_TRIGGER_RISING); /* TS pendown */
#elif defined(CONFIG_MIPS_DB1550)
set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW); /* CARD0# */
set_irq_type(AU1000_GPIO_5, IRQF_TRIGGER_LOW); /* CARD1# */
#else
set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW); /* CD0# */
set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW); /* CD1# */
set_irq_type(AU1000_GPIO_2, IRQF_TRIGGER_LOW); /* CARD0# */
set_irq_type(AU1000_GPIO_5, IRQF_TRIGGER_LOW); /* CARD1# */
set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW); /* STSCHG0# */
set_irq_type(AU1000_GPIO_4, IRQF_TRIGGER_LOW); /* STSCHG1# */
#endif
return 0;
}
arch_initcall(db1x00_init_irq);

90
arch/mips/alchemy/devboards/db1x00/irqmap.c
View file

@ -1,90 +0,0 @@
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx irq map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_MIPS_DB1500
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_BOSPORUS
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_MIRAGE
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
[12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
[13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
};
#endif
#ifdef CONFIG_MIPS_DB1550
char irq_tab_alchemy[][5] __initdata = {
[11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
#endif
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
#ifndef CONFIG_MIPS_MIRAGE
#ifdef CONFIG_MIPS_DB1550
{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
#else
{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 Fully_Interted# */
{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 STSCHG# */
{ AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 Fully_Interted# */
{ AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 STSCHG# */
{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
#endif
#else
{ AU1000_GPIO_7, IRQF_TRIGGER_RISING, 0 }, /* touchscreen pen down */
#endif
};
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}

17
arch/mips/alchemy/devboards/pb1000/board_setup.c
View file

@ -32,11 +32,6 @@
#include <prom.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_15, IRQF_TRIGGER_LOW, 0 },
};
const char *get_system_type(void)
{
return "Alchemy Pb1000";
@ -46,11 +41,6 @@ void board_reset(void)
{
}
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
void __init board_setup(void)
{
u32 pin_func, static_cfg0;
@ -193,3 +183,10 @@ void __init board_setup(void)
break;
}
}
static int __init pb1000_init_irq(void)
{
set_irq_type(AU1000_GPIO_15, IRQF_TRIGGER_LOW);
return 0;
}
arch_initcall(pb1000_init_irq);

24
arch/mips/alchemy/devboards/pb1100/board_setup.c
View file

@ -35,14 +35,6 @@
#include <prom.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_9, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card Fully_Inserted# */
{ AU1000_GPIO_10, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card STSCHG# */
{ AU1000_GPIO_11, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card IRQ# */
{ AU1000_GPIO_13, IRQF_TRIGGER_LOW, 0 }, /* DC_IRQ# */
};
const char *get_system_type(void)
{
return "Alchemy Pb1100";
@ -53,11 +45,6 @@ void board_reset(void)
bcsr_write(BCSR_SYSTEM, 0);
}
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
void __init board_setup(void)
{
volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
@ -158,3 +145,14 @@ void __init board_setup(void)
au_sync();
}
}
static int __init pb1100_init_irq(void)
{
set_irq_type(AU1000_GPIO_9, IRQF_TRIGGER_LOW); /* PCCD# */
set_irq_type(AU1000_GPIO_10, IRQF_TRIGGER_LOW); /* PCSTSCHG# */
set_irq_type(AU1000_GPIO_11, IRQF_TRIGGER_LOW); /* PCCard# */
set_irq_type(AU1000_GPIO_13, IRQF_TRIGGER_LOW); /* DC_IRQ# */
return 0;
}
arch_initcall(pb1100_init_irq);

2
arch/mips/alchemy/devboards/pb1200/Makefile
View file

@ -2,6 +2,6 @@
# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
#
obj-y := board_setup.o irqmap.o platform.o
obj-y := board_setup.o platform.o
EXTRA_CFLAGS += -Werror

46
arch/mips/alchemy/devboards/pb1200/board_setup.c
View file

@ -25,13 +25,23 @@
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/bcsr.h>
#include <prom.h>
#include <au1xxx.h>
#ifdef CONFIG_MIPS_PB1200
#include <asm/mach-pb1x00/pb1200.h>
#endif
#ifdef CONFIG_MIPS_DB1200
#include <asm/mach-db1x00/db1200.h>
#define PB1200_INT_BEGIN DB1200_INT_BEGIN
#define PB1200_INT_END DB1200_INT_END
#endif
#include <prom.h>
const char *get_system_type(void)
{
@ -137,6 +147,38 @@ void __init board_setup(void)
au_sync();
}
static int __init pb1200_init_irq(void)
{
#ifdef CONFIG_MIPS_PB1200
/* We have a problem with CPLD rev 3. */
if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
printk(KERN_ERR "updated to latest revision. This software will\n");
printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
panic("Game over. Your score is 0.");
}
#endif
set_irq_type(AU1000_GPIO_7, IRQF_TRIGGER_LOW);
bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1000_GPIO_7);
return 0;
}
arch_initcall(pb1200_init_irq);
int board_au1200fb_panel(void)
{
return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;

75
arch/mips/alchemy/devboards/pb1200/irqmap.c
View file

@ -1,75 +0,0 @@
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx irq map table
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_MIPS_PB1200
#include <asm/mach-pb1x00/pb1200.h>
#endif
#ifdef CONFIG_MIPS_DB1200
#include <asm/mach-db1x00/db1200.h>
#define PB1200_INT_BEGIN DB1200_INT_BEGIN
#define PB1200_INT_END DB1200_INT_END
#endif
#include <asm/mach-db1x00/bcsr.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
/* This is external interrupt cascade */
{ AU1000_GPIO_7, IRQF_TRIGGER_LOW, 0 },
};
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
#ifdef CONFIG_MIPS_PB1200
/* We have a problem with CPLD rev 3. */
if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
printk(KERN_ERR "updated to latest revision. This software will\n");
printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
printk(KERN_ERR "WARNING!!!\n");
panic("Game over. Your score is 0.");
}
#endif
bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1000_GPIO_7);
}

25
arch/mips/alchemy/devboards/pb1500/board_setup.c
View file

@ -40,14 +40,6 @@ char irq_tab_alchemy[][5] __initdata = {
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
};
const char *get_system_type(void)
{
@ -59,11 +51,6 @@ void board_reset(void)
bcsr_write(BCSR_SYSTEM, 0);
}
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
void __init board_setup(void)
{
u32 pin_func;
@ -166,3 +153,15 @@ void __init board_setup(void)
au_sync();
}
}
static int __init pb1500_init_irq(void)
{
set_irq_type(AU1500_GPIO_204, IRQF_TRIGGER_HIGH);
set_irq_type(AU1500_GPIO_201, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_202, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_203, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_205, IRQF_TRIGGER_LOW);
return 0;
}
arch_initcall(pb1500_init_irq);

19
arch/mips/alchemy/devboards/pb1550/board_setup.c
View file

@ -42,11 +42,6 @@ char irq_tab_alchemy[][5] __initdata = {
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
};
const char *get_system_type(void)
{
return "Alchemy Pb1550";
@ -57,11 +52,6 @@ void board_reset(void)
bcsr_write(BCSR_SYSTEM, 0);
}
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
void __init board_setup(void)
{
u32 pin_func;
@ -93,3 +83,12 @@ void __init board_setup(void)
printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
}
static int __init pb1550_init_irq(void)
{
set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW);
return 0;
}
arch_initcall(pb1550_init_irq);

2
arch/mips/alchemy/mtx-1/Makefile
View file

@ -6,7 +6,7 @@
# Makefile for 4G Systems MTX-1 board.
#
lib-y := init.o board_setup.o irqmap.o
lib-y := init.o board_setup.o
obj-y := platform.o
EXTRA_CFLAGS += -Werror

24
arch/mips/alchemy/mtx-1/board_setup.c
View file

@ -30,11 +30,23 @@
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#include <prom.h>
char irq_tab_alchemy[][5] __initdata = {
[0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
[1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
[2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
[3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
[4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
[5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
[6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
[7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
};
extern int (*board_pci_idsel)(unsigned int devsel, int assert);
int mtx1_pci_idsel(unsigned int devsel, int assert);
@ -109,3 +121,15 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
au_sync_udelay(1);
return 1;
}
static int __init mtx1_init_irq(void)
{
set_irq_type(AU1500_GPIO_204, IRQF_TRIGGER_HIGH);
set_irq_type(AU1500_GPIO_201, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_202, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_203, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_205, IRQF_TRIGGER_LOW);
return 0;
}
arch_initcall(mtx1_init_irq);

56
arch/mips/alchemy/mtx-1/irqmap.c
View file

@ -1,56 +0,0 @@
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx irq map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
[0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
[1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
[2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
[3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
[4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
[5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
[6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
[7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
};
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}

2
arch/mips/alchemy/xxs1500/Makefile
View file

@ -5,4 +5,4 @@
# Makefile for MyCable XXS1500 board.
#
lib-y := init.o board_setup.o irqmap.o
lib-y := init.o board_setup.o

21
arch/mips/alchemy/xxs1500/board_setup.c
View file

@ -25,6 +25,7 @@
#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <asm/mach-au1x00/au1000.h>
@ -92,3 +93,23 @@ void __init board_setup(void)
#endif
#endif
}
static int __init xxs1500_init_irq(void)
{
set_irq_type(AU1500_GPIO_204, IRQF_TRIGGER_HIGH);
set_irq_type(AU1500_GPIO_201, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_202, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_203, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_205, IRQF_TRIGGER_LOW);
set_irq_type(AU1500_GPIO_207, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_0, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_1, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_2, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_3, IRQF_TRIGGER_LOW);
set_irq_type(AU1000_GPIO_4, IRQF_TRIGGER_LOW); /* CF interrupt */
set_irq_type(AU1000_GPIO_5, IRQF_TRIGGER_LOW);
return 0;
}
arch_initcall(xxs1500_init_irq);

52
arch/mips/alchemy/xxs1500/irqmap.c
View file

@ -1,52 +0,0 @@
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx irq map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_207, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* CF interrupt */
{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 },
};
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}

15
arch/mips/include/asm/mach-au1x00/au1000.h
View file

@ -143,21 +143,6 @@ void au_sleep(void);
void save_au1xxx_intctl(void);
void restore_au1xxx_intctl(void);
/*
* Every board describes its IRQ mapping with this table.
*/
struct au1xxx_irqmap {
int im_irq;
int im_type;
int im_request;
};
/* core calls this function to let boards initialize other IRQ sources */
void board_init_irq(void);
/* boards call this to register additional (GPIO) interrupts */
void au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count);
#endif /* !defined (_LANGUAGE_ASSEMBLY) */
/*

1
arch/mips/include/asm/mach-db1x00/db1200.h
View file

@ -25,6 +25,7 @@
#define __ASM_DB1200_H
#include <linux/types.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX

1
arch/mips/include/asm/mach-pb1x00/pb1200.h
View file

@ -25,6 +25,7 @@
#define __ASM_PB1200_H
#include <linux/types.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX