1
0
Fork 0

tools: fix cross-compile var clobbering

Currently a number of Makefiles break when used with toolchains that
pass extra flags in CC and other cross-compile related variables (such
as --sysroot).

Thus we get this error when we use a toolchain that puts --sysroot in
the CC var:

  ~/src/linux/tools$ make iio
  [snip]
  iio_event_monitor.c:18:10: fatal error: unistd.h: No such file or directory
    #include <unistd.h>
             ^~~~~~~~~~

This occurs because we clobber several env vars related to
cross-compiling with lines like this:

  CC = $(CROSS_COMPILE)gcc

Although this will point to a valid cross-compiler, we lose any extra
flags that might exist in the CC variable, which can break toolchains
that rely on them (for example, those that use --sysroot).

This easily shows up using a Yocto SDK:

  $ . [snip]/sdk/environment-setup-cortexa8hf-neon-poky-linux-gnueabi

  $ echo $CC
  arm-poky-linux-gnueabi-gcc -march=armv7-a -mfpu=neon -mfloat-abi=hard
  -mcpu=cortex-a8
  --sysroot=[snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi

  $ echo $CROSS_COMPILE
  arm-poky-linux-gnueabi-

  $ echo ${CROSS_COMPILE}gcc
  krm-poky-linux-gnueabi-gcc

Although arm-poky-linux-gnueabi-gcc is a cross-compiler, we've lost the
--sysroot and other flags that enable us to find the right libraries to
link against, so we can't find unistd.h and other libraries and headers.
Normally with the --sysroot flag we would find unistd.h in the sdk
directory in the sysroot:

  $ find [snip]/sdk/sysroots -path '*/usr/include/unistd.h'
  [snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi/usr/include/unistd.h

The perf Makefile adds CC = $(CROSS_COMPILE)gcc if and only if CC is not
already set, and it compiles correctly with the above toolchain.

So, generalize the logic that perf uses in the common Makefile and
remove the manual CC = $(CROSS_COMPILE)gcc lines from each Makefile.

Note that this patch does not fix cross-compile for all the tools (some
have other bugs), but it does fix it for all except usb and acpi, which
still have other unrelated issues.

I tested both with and without the patch on native and cross-build and
there appear to be no regressions.

Link: http://lkml.kernel.org/r/20180107214028.23771-1-martin@martingkelly.com
Signed-off-by: Martin Kelly <martin@martingkelly.com>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Pali Rohar <pali.rohar@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Robert Moore <robert.moore@intel.com>
Cc: Lv Zheng <lv.zheng@intel.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Valentina Manea <valentina.manea.m@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
hifive-unleashed-5.1
Martin Kelly 2018-02-21 14:45:12 -08:00 committed by Linus Torvalds
parent af3e79d295
commit 7ed1c1901f
13 changed files with 18 additions and 22 deletions

View File

@ -1,7 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
# Makefile for cgroup tools
CC = $(CROSS_COMPILE)gcc
CFLAGS = -Wall -Wextra
all: cgroup_event_listener

View File

@ -12,8 +12,6 @@ endif
# (this improves performance and avoids hard-to-debug behaviour);
MAKEFLAGS += -r
CC = $(CROSS_COMPILE)gcc
LD = $(CROSS_COMPILE)ld
CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include
ALL_TARGETS := lsgpio gpio-hammer gpio-event-mon

View File

@ -1,7 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
# Makefile for Hyper-V tools
CC = $(CROSS_COMPILE)gcc
WARNINGS = -Wall -Wextra
CFLAGS = $(WARNINGS) -g $(shell getconf LFS_CFLAGS)

View File

@ -12,8 +12,6 @@ endif
# (this improves performance and avoids hard-to-debug behaviour);
MAKEFLAGS += -r
CC = $(CROSS_COMPILE)gcc
LD = $(CROSS_COMPILE)ld
CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include
ALL_TARGETS := iio_event_monitor lsiio iio_generic_buffer

View File

@ -2,7 +2,6 @@
PREFIX ?= /usr
SBINDIR ?= sbin
INSTALL ?= install
CC = $(CROSS_COMPILE)gcc
TARGET = freefall

View File

@ -1,7 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
# Makefile for LEDs tools
CC = $(CROSS_COMPILE)gcc
CFLAGS = -Wall -Wextra -g -I../../include/uapi
all: uledmon led_hw_brightness_mon

View File

@ -146,12 +146,6 @@ define allow-override
$(eval $(1) = $(2)))
endef
# Allow setting CC and AR and LD, or setting CROSS_COMPILE as a prefix.
$(call allow-override,CC,$(CROSS_COMPILE)gcc)
$(call allow-override,AR,$(CROSS_COMPILE)ar)
$(call allow-override,LD,$(CROSS_COMPILE)ld)
$(call allow-override,CXX,$(CROSS_COMPILE)g++)
LD += $(EXTRA_LDFLAGS)
HOSTCC ?= gcc

View File

@ -56,9 +56,6 @@ INSTALL_SCRIPT = ${INSTALL_PROGRAM}
# to compile vs uClibc, that can be done here as well.
CROSS = #/usr/i386-linux-uclibc/usr/bin/i386-uclibc-
CROSS_COMPILE ?= $(CROSS)
CC = $(CROSS_COMPILE)gcc
LD = $(CROSS_COMPILE)gcc
STRIP = $(CROSS_COMPILE)strip
HOSTCC = gcc
# check if compiler option is supported

View File

@ -42,6 +42,24 @@ EXTRA_WARNINGS += -Wformat
CC_NO_CLANG := $(shell $(CC) -dM -E -x c /dev/null | grep -Fq "__clang__"; echo $$?)
# Makefiles suck: This macro sets a default value of $(2) for the
# variable named by $(1), unless the variable has been set by
# environment or command line. This is necessary for CC and AR
# because make sets default values, so the simpler ?= approach
# won't work as expected.
define allow-override
$(if $(or $(findstring environment,$(origin $(1))),\
$(findstring command line,$(origin $(1)))),,\
$(eval $(1) = $(2)))
endef
# Allow setting various cross-compile vars or setting CROSS_COMPILE as a prefix.
$(call allow-override,CC,$(CROSS_COMPILE)gcc)
$(call allow-override,AR,$(CROSS_COMPILE)ar)
$(call allow-override,LD,$(CROSS_COMPILE)ld)
$(call allow-override,CXX,$(CROSS_COMPILE)g++)
$(call allow-override,STRIP,$(CROSS_COMPILE)strip)
ifeq ($(CC_NO_CLANG), 1)
EXTRA_WARNINGS += -Wstrict-aliasing=3
endif

View File

@ -11,8 +11,6 @@ endif
# (this improves performance and avoids hard-to-debug behaviour);
MAKEFLAGS += -r
CC = $(CROSS_COMPILE)gcc
LD = $(CROSS_COMPILE)ld
CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include
ALL_TARGETS := spidev_test spidev_fdx

View File

@ -1,7 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
# Makefile for USB tools
CC = $(CROSS_COMPILE)gcc
PTHREAD_LIBS = -lpthread
WARNINGS = -Wall -Wextra
CFLAGS = $(WARNINGS) -g -I../include

View File

@ -6,7 +6,6 @@ TARGETS=page-types slabinfo page_owner_sort
LIB_DIR = ../lib/api
LIBS = $(LIB_DIR)/libapi.a
CC = $(CROSS_COMPILE)gcc
CFLAGS = -Wall -Wextra -I../lib/
LDFLAGS = $(LIBS)

View File

@ -2,7 +2,6 @@ PREFIX ?= /usr
SBINDIR ?= sbin
INSTALL ?= install
CFLAGS += -D__EXPORTED_HEADERS__ -I../../include/uapi -I../../include
CC = $(CROSS_COMPILE)gcc
TARGET = dell-smbios-example