diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 77764301844b..0202a7c20e62 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -112,10 +112,8 @@ * private definitions which should NOT be used outside memory.h * files. Use virt_to_phys/phys_to_virt/__pa/__va instead. */ -#ifndef __virt_to_phys #define __virt_to_phys(x) ((x) - PAGE_OFFSET + PHYS_OFFSET) #define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) -#endif /* * Convert a physical address to a Page Frame Number and back @@ -180,6 +178,11 @@ static inline void *phys_to_virt(unsigned long x) * memory. Use of these is *deprecated* (and that doesn't mean * use the __ prefixed forms instead.) See dma-mapping.h. */ +#ifndef __virt_to_bus +#define __virt_to_bus __virt_to_phys +#define __bus_to_virt __phys_to_virt +#endif + static inline __deprecated unsigned long virt_to_bus(void *x) { return __virt_to_bus((unsigned long)x); diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index 5fee45e23038..f341c9dbd662 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -108,30 +108,36 @@ #error Unknown user operations model #endif +struct page; + struct cpu_user_fns { - void (*cpu_clear_user_page)(void *p, unsigned long user); - void (*cpu_copy_user_page)(void *to, const void *from, - unsigned long user); + void (*cpu_clear_user_highpage)(struct page *page, unsigned long vaddr); + void (*cpu_copy_user_highpage)(struct page *to, struct page *from, + unsigned long vaddr); }; #ifdef MULTI_USER extern struct cpu_user_fns cpu_user; -#define __cpu_clear_user_page cpu_user.cpu_clear_user_page -#define __cpu_copy_user_page cpu_user.cpu_copy_user_page +#define __cpu_clear_user_highpage cpu_user.cpu_clear_user_highpage +#define __cpu_copy_user_highpage cpu_user.cpu_copy_user_highpage #else -#define __cpu_clear_user_page __glue(_USER,_clear_user_page) -#define __cpu_copy_user_page __glue(_USER,_copy_user_page) +#define __cpu_clear_user_highpage __glue(_USER,_clear_user_highpage) +#define __cpu_copy_user_highpage __glue(_USER,_copy_user_highpage) -extern void __cpu_clear_user_page(void *p, unsigned long user); -extern void __cpu_copy_user_page(void *to, const void *from, - unsigned long user); +extern void __cpu_clear_user_highpage(struct page *page, unsigned long vaddr); +extern void __cpu_copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr); #endif -#define clear_user_page(addr,vaddr,pg) __cpu_clear_user_page(addr, vaddr) -#define copy_user_page(to,from,vaddr,pg) __cpu_copy_user_page(to, from, vaddr) +#define clear_user_highpage(page,vaddr) \ + __cpu_clear_user_highpage(page, vaddr) + +#define __HAVE_ARCH_COPY_USER_HIGHPAGE +#define copy_user_highpage(to,from,vaddr,vma) \ + __cpu_copy_user_highpage(to, from, vaddr) #define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) extern void copy_page(void *to, const void *from); diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index a65413ba121d..f2cd18a0932b 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -209,9 +209,11 @@ struct meminfo { struct membank bank[NR_BANKS]; }; +extern struct meminfo meminfo; + #define for_each_nodebank(iter,mi,no) \ - for (iter = 0; iter < mi->nr_banks; iter++) \ - if (mi->bank[iter].node == no) + for (iter = 0; iter < (mi)->nr_banks; iter++) \ + if ((mi)->bank[iter].node == no) #define bank_pfn_start(bank) __phys_to_pfn((bank)->start) #define bank_pfn_end(bank) __phys_to_pfn((bank)->start + (bank)->size) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index d4dae3e9b294..4f6ae06d0855 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -59,7 +59,7 @@ static int __init fpe_setup(char *line) __setup("fpe=", fpe_setup); #endif -extern void paging_init(struct meminfo *, struct machine_desc *desc); +extern void paging_init(struct machine_desc *desc); extern void reboot_setup(char *str); extern void _text, _etext, __data_start, _edata, _end; @@ -112,7 +112,6 @@ static struct stack stacks[NR_CPUS]; char elf_platform[ELF_PLATFORM_SIZE]; EXPORT_SYMBOL(elf_platform); -static struct meminfo meminfo __initdata = { 0, }; static const char *cpu_name; static const char *machine_name; static char __initdata command_line[COMMAND_LINE_SIZE]; @@ -367,21 +366,34 @@ static struct machine_desc * __init setup_machine(unsigned int nr) return list; } -static void __init arm_add_memory(unsigned long start, unsigned long size) +static int __init arm_add_memory(unsigned long start, unsigned long size) { - struct membank *bank; + struct membank *bank = &meminfo.bank[meminfo.nr_banks]; + + if (meminfo.nr_banks >= NR_BANKS) { + printk(KERN_CRIT "NR_BANKS too low, " + "ignoring memory at %#lx\n", start); + return -EINVAL; + } /* * Ensure that start/size are aligned to a page boundary. * Size is appropriately rounded down, start is rounded up. */ size -= start & ~PAGE_MASK; - - bank = &meminfo.bank[meminfo.nr_banks++]; - bank->start = PAGE_ALIGN(start); bank->size = size & PAGE_MASK; bank->node = PHYS_TO_NID(start); + + /* + * Check whether this memory region has non-zero size or + * invalid node number. + */ + if (bank->size == 0 || bank->node >= MAX_NUMNODES) + return -EINVAL; + + meminfo.nr_banks++; + return 0; } /* @@ -539,14 +551,7 @@ __tagtable(ATAG_CORE, parse_tag_core); static int __init parse_tag_mem32(const struct tag *tag) { - if (meminfo.nr_banks >= NR_BANKS) { - printk(KERN_WARNING - "Ignoring memory bank 0x%08x size %dKB\n", - tag->u.mem.start, tag->u.mem.size / 1024); - return -EINVAL; - } - arm_add_memory(tag->u.mem.start, tag->u.mem.size); - return 0; + return arm_add_memory(tag->u.mem.start, tag->u.mem.size); } __tagtable(ATAG_MEM, parse_tag_mem32); @@ -718,7 +723,7 @@ void __init setup_arch(char **cmdline_p) memcpy(boot_command_line, from, COMMAND_LINE_SIZE); boot_command_line[COMMAND_LINE_SIZE-1] = '\0'; parse_cmdline(cmdline_p, from); - paging_init(&meminfo, mdesc); + paging_init(mdesc); request_standard_resources(&meminfo, mdesc); #ifdef CONFIG_SMP diff --git a/arch/arm/mach-aaec2000/include/mach/memory.h b/arch/arm/mach-aaec2000/include/mach/memory.h index 56ae900a482e..c00822543d9f 100644 --- a/arch/arm/mach-aaec2000/include/mach/memory.h +++ b/arch/arm/mach-aaec2000/include/mach/memory.h @@ -14,9 +14,6 @@ #define PHYS_OFFSET UL(0xf0000000) -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - /* * The nodes are the followings: * diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h index 9dd1b8c79b08..14f4ef4b6a9e 100644 --- a/arch/arm/mach-at91/include/mach/memory.h +++ b/arch/arm/mach-at91/include/mach/memory.h @@ -25,15 +25,4 @@ #define PHYS_OFFSET (AT91_SDRAM_BASE) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - #endif diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h index 98ec30c97bbe..e522b20bcbc2 100644 --- a/arch/arm/mach-clps711x/include/mach/memory.h +++ b/arch/arm/mach-clps711x/include/mach/memory.h @@ -26,25 +26,7 @@ */ #define PHYS_OFFSET UL(0xc0000000) -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ - -#if defined(CONFIG_ARCH_CDB89712) - -#define __virt_to_bus(x) (x) -#define __bus_to_virt(x) (x) - -#elif defined (CONFIG_ARCH_AUTCPU12) - -#define __virt_to_bus(x) (x) -#define __bus_to_virt(x) (x) - -#else +#if !defined(CONFIG_ARCH_CDB89712) && !defined (CONFIG_ARCH_AUTCPU12) #define __virt_to_bus(x) ((x) - PAGE_OFFSET) #define __bus_to_virt(x) ((x) + PAGE_OFFSET) diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h index dd1625c23cf4..3a3353357bac 100644 --- a/arch/arm/mach-davinci/include/mach/memory.h +++ b/arch/arm/mach-davinci/include/mach/memory.h @@ -55,10 +55,4 @@ __arch_adjust_zones(int node, unsigned long *size, unsigned long *holes) #endif -/* - * Bus address is physical address - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - #endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-ebsa110/include/mach/memory.h b/arch/arm/mach-ebsa110/include/mach/memory.h index eea4b75b657b..0ca66d080c69 100644 --- a/arch/arm/mach-ebsa110/include/mach/memory.h +++ b/arch/arm/mach-ebsa110/include/mach/memory.h @@ -21,13 +21,6 @@ */ #define PHYS_OFFSET UL(0x00000000) -/* - * We keep this 1:1 so that we don't interfere - * with the PCMCIA memory regions - */ -#define __virt_to_bus(x) (x) -#define __bus_to_virt(x) (x) - /* * Cache flushing area - SRAM */ diff --git a/arch/arm/mach-ep93xx/include/mach/memory.h b/arch/arm/mach-ep93xx/include/mach/memory.h index f1b633590752..5c80c3c8158d 100644 --- a/arch/arm/mach-ep93xx/include/mach/memory.h +++ b/arch/arm/mach-ep93xx/include/mach/memory.h @@ -7,8 +7,4 @@ #define PHYS_OFFSET UL(0x00000000) -#define __bus_to_virt(x) __phys_to_virt(x) -#define __virt_to_bus(x) __virt_to_phys(x) - - #endif diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h index 6ae2f1a07ab9..cb16e59d87b6 100644 --- a/arch/arm/mach-footbridge/include/mach/memory.h +++ b/arch/arm/mach-footbridge/include/mach/memory.h @@ -30,9 +30,18 @@ extern unsigned long __virt_to_bus(unsigned long); extern unsigned long __bus_to_virt(unsigned long); #endif +#define __virt_to_bus __virt_to_bus +#define __bus_to_virt __bus_to_virt #elif defined(CONFIG_FOOTBRIDGE_HOST) +/* + * The footbridge is programmed to expose the system RAM at the corresponding + * address. So, if PAGE_OFFSET is 0xc0000000, RAM appears at 0xe0000000. + * If 0x80000000, then its exposed at 0xa0000000 on the bus. etc. + * The only requirement is that the RAM isn't placed at bus address 0 which + * would clash with VGA cards. + */ #define __virt_to_bus(x) ((x) - 0xe0000000) #define __bus_to_virt(x) ((x) + 0xe0000000) diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h index cb26f49cc4e1..83a2fa090e88 100644 --- a/arch/arm/mach-h720x/include/mach/memory.h +++ b/arch/arm/mach-h720x/include/mach/memory.h @@ -7,23 +7,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H -/* - * Page offset: - * ( 0xc0000000UL ) - */ #define PHYS_OFFSET UL(0x40000000) -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - * - * There is something to do here later !, Mar 2000, Jungjun Kim - */ - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - #endif diff --git a/arch/arm/mach-imx/include/mach/memory.h b/arch/arm/mach-imx/include/mach/memory.h index 5c453063c0ed..a93df7cba694 100644 --- a/arch/arm/mach-imx/include/mach/memory.h +++ b/arch/arm/mach-imx/include/mach/memory.h @@ -23,14 +23,4 @@ #define PHYS_OFFSET UL(0x08000000) -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) (x - PAGE_OFFSET + PHYS_OFFSET) -#define __bus_to_virt(x) (x - PHYS_OFFSET + PAGE_OFFSET) - #endif diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h index be7e63c21d25..30d41d0e7d04 100644 --- a/arch/arm/mach-integrator/include/mach/memory.h +++ b/arch/arm/mach-integrator/include/mach/memory.h @@ -24,15 +24,8 @@ * Physical DRAM offset. */ #define PHYS_OFFSET UL(0x00000000) -#define BUS_OFFSET UL(0x80000000) -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ +#define BUS_OFFSET UL(0x80000000) #define __virt_to_bus(x) (x - PAGE_OFFSET + BUS_OFFSET) #define __bus_to_virt(x) (x - BUS_OFFSET + PAGE_OFFSET) diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h index b82602d529bf..e012bf13c955 100644 --- a/arch/arm/mach-iop13xx/include/mach/memory.h +++ b/arch/arm/mach-iop13xx/include/mach/memory.h @@ -16,18 +16,6 @@ #define IOP13XX_PMMR_P_START (IOP13XX_PMMR_PHYS_MEM_BASE) #define IOP13XX_PMMR_P_END (IOP13XX_PMMR_PHYS_MEM_BASE + IOP13XX_PMMR_SIZE) -/* - * Virtual view <-> PCI DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ - -/* RAM has 1:1 mapping on the PCIe/x Busses */ -#define __virt_to_bus(x) (__virt_to_phys(x)) -#define __bus_to_virt(x) (__phys_to_virt(x)) - static inline dma_addr_t __virt_to_lbus(unsigned long x) { return x + IOP13XX_PMMR_PHYS_MEM_BASE - IOP13XX_PMMR_VIRT_MEM_BASE; @@ -55,7 +43,7 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x) if (is_lbus_device(dev) && __is_lbus_dma(__dma)) \ __virt = __lbus_to_virt(__dma); \ else \ - __virt = __bus_to_virt(__dma); \ + __virt = __phys_to_virt(__dma); \ (void *)__virt; \ }) @@ -66,7 +54,7 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x) if (is_lbus_device(dev) && __is_lbus_virt(__virt)) \ __dma = __virt_to_lbus(__virt); \ else \ - __dma = __virt_to_bus(__virt); \ + __dma = __virt_to_phys(__virt); \ __dma; \ }) diff --git a/arch/arm/mach-iop32x/include/mach/memory.h b/arch/arm/mach-iop32x/include/mach/memory.h index 42cd4bf3148c..61c7bdb26a81 100644 --- a/arch/arm/mach-iop32x/include/mach/memory.h +++ b/arch/arm/mach-iop32x/include/mach/memory.h @@ -12,15 +12,4 @@ */ #define PHYS_OFFSET UL(0xa0000000) -/* - * Virtual view <-> PCI DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) (__virt_to_phys(x)) -#define __bus_to_virt(x) (__phys_to_virt(x)) - - #endif diff --git a/arch/arm/mach-iop33x/include/mach/memory.h b/arch/arm/mach-iop33x/include/mach/memory.h index 2cef0bbb354f..c46c6ba30186 100644 --- a/arch/arm/mach-iop33x/include/mach/memory.h +++ b/arch/arm/mach-iop33x/include/mach/memory.h @@ -12,15 +12,4 @@ */ #define PHYS_OFFSET UL(0x00000000) -/* - * Virtual view <-> PCI DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) (__virt_to_phys(x)) -#define __bus_to_virt(x) (__phys_to_virt(x)) - - #endif diff --git a/arch/arm/mach-ixp2000/include/mach/memory.h b/arch/arm/mach-ixp2000/include/mach/memory.h index 241529a7c52d..aee7eb8a71b2 100644 --- a/arch/arm/mach-ixp2000/include/mach/memory.h +++ b/arch/arm/mach-ixp2000/include/mach/memory.h @@ -15,13 +15,6 @@ #define PHYS_OFFSET UL(0x00000000) -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ #include #define __virt_to_bus(v) \ diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h index 9d40115f7ebe..fdd138706c70 100644 --- a/arch/arm/mach-ixp23xx/include/mach/memory.h +++ b/arch/arm/mach-ixp23xx/include/mach/memory.h @@ -19,16 +19,6 @@ */ #define PHYS_OFFSET (0x00000000) - -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#ifndef __ASSEMBLY__ - #define __virt_to_bus(v) \ ({ unsigned int ret; \ ret = ((__virt_to_phys(v) - 0x00000000) + \ @@ -43,6 +33,3 @@ #define arch_is_coherent() 1 #endif - - -#endif diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h index c4d2830ac987..2e481db0ca58 100644 --- a/arch/arm/mach-ixp4xx/include/mach/memory.h +++ b/arch/arm/mach-ixp4xx/include/mach/memory.h @@ -25,16 +25,4 @@ void ixp4xx_adjust_zones(int node, unsigned long *size, unsigned long *holes); #endif -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - * - * These are dummies for now. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - #endif diff --git a/arch/arm/mach-kirkwood/include/mach/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h index b5fb34bdccd5..45431e131465 100644 --- a/arch/arm/mach-kirkwood/include/mach/memory.h +++ b/arch/arm/mach-kirkwood/include/mach/memory.h @@ -7,8 +7,4 @@ #define PHYS_OFFSET UL(0x00000000) -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - - #endif diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h index 8fbc4c76c38b..6d5887cf5742 100644 --- a/arch/arm/mach-ks8695/include/mach/memory.h +++ b/arch/arm/mach-ks8695/include/mach/memory.h @@ -37,11 +37,6 @@ extern struct bus_type platform_bus_type; (dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); }) #define __arch_page_to_dma(dev, x) __arch_virt_to_dma(dev, page_address(x)) -#else - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - #endif #endif diff --git a/arch/arm/mach-l7200/include/mach/memory.h b/arch/arm/mach-l7200/include/mach/memory.h index f338cf3ffd93..9fb40ed2f03b 100644 --- a/arch/arm/mach-l7200/include/mach/memory.h +++ b/arch/arm/mach-l7200/include/mach/memory.h @@ -17,9 +17,6 @@ */ #define PHYS_OFFSET UL(0xf0000000) -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - /* * Cache flushing area - ROM */ diff --git a/arch/arm/mach-lh7a40x/include/mach/memory.h b/arch/arm/mach-lh7a40x/include/mach/memory.h index 1da14ff66c93..189d20e543e7 100644 --- a/arch/arm/mach-lh7a40x/include/mach/memory.h +++ b/arch/arm/mach-lh7a40x/include/mach/memory.h @@ -19,16 +19,6 @@ */ #define PHYS_OFFSET UL(0xc0000000) -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - #ifdef CONFIG_DISCONTIGMEM /* diff --git a/arch/arm/mach-loki/include/mach/memory.h b/arch/arm/mach-loki/include/mach/memory.h index a39533ab489d..2ed7e6e732c2 100644 --- a/arch/arm/mach-loki/include/mach/memory.h +++ b/arch/arm/mach-loki/include/mach/memory.h @@ -7,8 +7,4 @@ #define PHYS_OFFSET UL(0x00000000) -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - - #endif diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h index 63fd47f2e62e..f4698baec976 100644 --- a/arch/arm/mach-msm/include/mach/memory.h +++ b/arch/arm/mach-msm/include/mach/memory.h @@ -19,9 +19,5 @@ /* physical offset of RAM */ #define PHYS_OFFSET UL(0x10000000) -/* bus address and physical addresses are identical */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - #endif diff --git a/arch/arm/mach-mv78xx0/include/mach/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h index 9e47a140ff7a..e663042d307f 100644 --- a/arch/arm/mach-mv78xx0/include/mach/memory.h +++ b/arch/arm/mach-mv78xx0/include/mach/memory.h @@ -7,8 +7,4 @@ #define PHYS_OFFSET UL(0x00000000) -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - - #endif diff --git a/arch/arm/mach-netx/include/mach/memory.h b/arch/arm/mach-netx/include/mach/memory.h index 53745a1378de..9a363f297f90 100644 --- a/arch/arm/mach-netx/include/mach/memory.h +++ b/arch/arm/mach-netx/include/mach/memory.h @@ -22,15 +22,5 @@ #define PHYS_OFFSET UL(0x80000000) -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - #endif diff --git a/arch/arm/mach-ns9xxx/include/mach/memory.h b/arch/arm/mach-ns9xxx/include/mach/memory.h index 649ee6235b94..6107193adbfe 100644 --- a/arch/arm/mach-ns9xxx/include/mach/memory.h +++ b/arch/arm/mach-ns9xxx/include/mach/memory.h @@ -21,7 +21,4 @@ #define PHYS_OFFSET UL(0x00000000) -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - #endif diff --git a/arch/arm/mach-orion5x/include/mach/memory.h b/arch/arm/mach-orion5x/include/mach/memory.h index 54dd76b013f2..52a2955d0f87 100644 --- a/arch/arm/mach-orion5x/include/mach/memory.h +++ b/arch/arm/mach-orion5x/include/mach/memory.h @@ -9,8 +9,4 @@ #define PHYS_OFFSET UL(0x00000000) -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - - #endif diff --git a/arch/arm/mach-pnx4008/include/mach/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h index 5789a2d16f5a..b38d50c156c4 100644 --- a/arch/arm/mach-pnx4008/include/mach/memory.h +++ b/arch/arm/mach-pnx4008/include/mach/memory.h @@ -18,7 +18,4 @@ */ #define PHYS_OFFSET (0x80000000) -#define __virt_to_bus(x) ((x) - PAGE_OFFSET + PHYS_OFFSET) -#define __bus_to_virt(x) ((x) + PAGE_OFFSET - PHYS_OFFSET) - #endif diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h index 59aef89808d6..eac491c2d741 100644 --- a/arch/arm/mach-pxa/include/mach/memory.h +++ b/arch/arm/mach-pxa/include/mach/memory.h @@ -17,16 +17,6 @@ */ #define PHYS_OFFSET UL(0xa0000000) -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - /* * The nodes are matched with the physical SDRAM banks as follows: * diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 0842c531ee4d..782903fe9c6c 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -565,7 +565,7 @@ static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state) u32 *mem_resume_unknown = phys_to_virt(RESUME_UNKNOWN_ADDR); /* Devices prepare suspend */ - is_bt_on = gpio_get_value(GPIO83_BT_ON); + is_bt_on = !!gpio_get_value(GPIO83_BT_ON); pxa2xx_mfp_set_lpm(GPIO83_BT_ON, is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW); diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S index a647693d9856..324d25a48c85 100644 --- a/arch/arm/mach-pxa/mioa701_bootresume.S +++ b/arch/arm/mach-pxa/mioa701_bootresume.S @@ -24,6 +24,7 @@ ENTRY(mioa701_jumpaddr) 1: mov r0, #0xa0000000 @ Don't suppose memory access works orr r0, r0, #0x00200000 @ even if it's supposed to + orr r0, r0, #0x0000b000 mov r1, #0 str r1, [r0] @ Early disable resume for next boot ldr r0, mioa701_jumpaddr @ (Murphy's Law) diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h index 0e673483a141..65a0742094f7 100644 --- a/arch/arm/mach-realview/include/mach/memory.h +++ b/arch/arm/mach-realview/include/mach/memory.h @@ -25,14 +25,4 @@ */ #define PHYS_OFFSET UL(0x00000000) -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) ((x) - PAGE_OFFSET) -#define __bus_to_virt(x) ((x) + PAGE_OFFSET) - #endif diff --git a/arch/arm/mach-rpc/include/mach/memory.h b/arch/arm/mach-rpc/include/mach/memory.h index 9bf7e43e2863..78191bf25192 100644 --- a/arch/arm/mach-rpc/include/mach/memory.h +++ b/arch/arm/mach-rpc/include/mach/memory.h @@ -23,13 +23,6 @@ */ #define PHYS_OFFSET UL(0x10000000) -/* - * These are exactly the same on the RiscPC as the - * physical memory view. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - /* * Cache flushing area - ROM */ diff --git a/arch/arm/mach-s3c2400/include/mach/memory.h b/arch/arm/mach-s3c2400/include/mach/memory.h index 8f4878e4f591..cf5901ffd385 100644 --- a/arch/arm/mach-s3c2400/include/mach/memory.h +++ b/arch/arm/mach-s3c2400/include/mach/memory.h @@ -17,7 +17,4 @@ #define PHYS_OFFSET UL(0x0C000000) -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - #endif diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h index 93782628a786..6f1e5871ae4b 100644 --- a/arch/arm/mach-s3c2410/include/mach/memory.h +++ b/arch/arm/mach-s3c2410/include/mach/memory.h @@ -13,7 +13,4 @@ #define PHYS_OFFSET UL(0x30000000) -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - #endif diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h index 1c127b68581d..6984034f6958 100644 --- a/arch/arm/mach-sa1100/include/mach/memory.h +++ b/arch/arm/mach-sa1100/include/mach/memory.h @@ -27,18 +27,6 @@ void sa1111_adjust_zones(int node, unsigned long *size, unsigned long *holes); #endif #endif -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - * - * On the SA1100, bus addresses are equivalent to physical addresses. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - /* * Because of the wide memory address space between physical RAM banks on the * SA1100, it's much convenient to use Linux's SparseMEM support to implement diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h index b7874ad9f9f6..d00c05eabd52 100644 --- a/arch/arm/mach-shark/include/mach/memory.h +++ b/arch/arm/mach-shark/include/mach/memory.h @@ -36,9 +36,6 @@ static inline void __arch_adjust_zones(int node, unsigned long *zone_size, unsig #endif -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - /* * Cache flushing area */ diff --git a/arch/arm/mach-versatile/include/mach/memory.h b/arch/arm/mach-versatile/include/mach/memory.h index b6315c0602ac..79aeab86b903 100644 --- a/arch/arm/mach-versatile/include/mach/memory.h +++ b/arch/arm/mach-versatile/include/mach/memory.h @@ -25,14 +25,4 @@ */ #define PHYS_OFFSET UL(0x00000000) -/* - * Virtual view <-> DMA view memory address translations - * virt_to_bus: Used to translate the virtual address to an - * address suitable to be passed to set_dma_addr - * bus_to_virt: Used to convert an address for DMA operations - * to an address that the kernel can use. - */ -#define __virt_to_bus(x) ((x) - PAGE_OFFSET) -#define __bus_to_virt(x) ((x) + PAGE_OFFSET) - #endif diff --git a/arch/arm/mm/copypage-feroceon.S b/arch/arm/mm/copypage-feroceon.S deleted file mode 100644 index 7eb0d320d240..000000000000 --- a/arch/arm/mm/copypage-feroceon.S +++ /dev/null @@ -1,95 +0,0 @@ -/* - * linux/arch/arm/lib/copypage-feroceon.S - * - * Copyright (C) 2008 Marvell Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This handles copy_user_page and clear_user_page on Feroceon - * more optimally than the generic implementations. - */ -#include -#include -#include - - .text - .align 5 - -ENTRY(feroceon_copy_user_page) - stmfd sp!, {r4-r9, lr} - mov ip, #PAGE_SZ -1: mov lr, r1 - ldmia r1!, {r2 - r9} - pld [lr, #32] - pld [lr, #64] - pld [lr, #96] - pld [lr, #128] - pld [lr, #160] - pld [lr, #192] - pld [lr, #224] - stmia r0, {r2 - r9} - ldmia r1!, {r2 - r9} - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line - add r0, r0, #32 - stmia r0, {r2 - r9} - ldmia r1!, {r2 - r9} - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line - add r0, r0, #32 - stmia r0, {r2 - r9} - ldmia r1!, {r2 - r9} - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line - add r0, r0, #32 - stmia r0, {r2 - r9} - ldmia r1!, {r2 - r9} - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line - add r0, r0, #32 - stmia r0, {r2 - r9} - ldmia r1!, {r2 - r9} - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line - add r0, r0, #32 - stmia r0, {r2 - r9} - ldmia r1!, {r2 - r9} - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line - add r0, r0, #32 - stmia r0, {r2 - r9} - ldmia r1!, {r2 - r9} - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line - add r0, r0, #32 - stmia r0, {r2 - r9} - subs ip, ip, #(32 * 8) - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line - add r0, r0, #32 - bne 1b - mcr p15, 0, ip, c7, c10, 4 @ drain WB - ldmfd sp!, {r4-r9, pc} - - .align 5 - -ENTRY(feroceon_clear_user_page) - stmfd sp!, {r4-r7, lr} - mov r1, #PAGE_SZ/32 - mov r2, #0 - mov r3, #0 - mov r4, #0 - mov r5, #0 - mov r6, #0 - mov r7, #0 - mov ip, #0 - mov lr, #0 -1: stmia r0, {r2-r7, ip, lr} - subs r1, r1, #1 - mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line - add r0, r0, #32 - bne 1b - mcr p15, 0, r1, c7, c10, 4 @ drain WB - ldmfd sp!, {r4-r7, pc} - - __INITDATA - - .type feroceon_user_fns, #object -ENTRY(feroceon_user_fns) - .long feroceon_clear_user_page - .long feroceon_copy_user_page - .size feroceon_user_fns, . - feroceon_user_fns diff --git a/arch/arm/mm/copypage-feroceon.c b/arch/arm/mm/copypage-feroceon.c new file mode 100644 index 000000000000..c3ba6a94da0c --- /dev/null +++ b/arch/arm/mm/copypage-feroceon.c @@ -0,0 +1,111 @@ +/* + * linux/arch/arm/mm/copypage-feroceon.S + * + * Copyright (C) 2008 Marvell Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This handles copy_user_highpage and clear_user_page on Feroceon + * more optimally than the generic implementations. + */ +#include +#include + +static void __attribute__((naked)) +feroceon_copy_user_page(void *kto, const void *kfrom) +{ + asm("\ + stmfd sp!, {r4-r9, lr} \n\ + mov ip, %0 \n\ +1: mov lr, r1 \n\ + ldmia r1!, {r2 - r9} \n\ + pld [lr, #32] \n\ + pld [lr, #64] \n\ + pld [lr, #96] \n\ + pld [lr, #128] \n\ + pld [lr, #160] \n\ + pld [lr, #192] \n\ + pld [lr, #224] \n\ + stmia r0, {r2 - r9} \n\ + ldmia r1!, {r2 - r9} \n\ + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ + add r0, r0, #32 \n\ + stmia r0, {r2 - r9} \n\ + ldmia r1!, {r2 - r9} \n\ + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ + add r0, r0, #32 \n\ + stmia r0, {r2 - r9} \n\ + ldmia r1!, {r2 - r9} \n\ + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ + add r0, r0, #32 \n\ + stmia r0, {r2 - r9} \n\ + ldmia r1!, {r2 - r9} \n\ + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ + add r0, r0, #32 \n\ + stmia r0, {r2 - r9} \n\ + ldmia r1!, {r2 - r9} \n\ + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ + add r0, r0, #32 \n\ + stmia r0, {r2 - r9} \n\ + ldmia r1!, {r2 - r9} \n\ + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ + add r0, r0, #32 \n\ + stmia r0, {r2 - r9} \n\ + ldmia r1!, {r2 - r9} \n\ + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ + add r0, r0, #32 \n\ + stmia r0, {r2 - r9} \n\ + subs ip, ip, #(32 * 8) \n\ + mcr p15, 0, r0, c7, c14, 1 @ clean and invalidate D line\n\ + add r0, r0, #32 \n\ + bne 1b \n\ + mcr p15, 0, ip, c7, c10, 4 @ drain WB\n\ + ldmfd sp!, {r4-r9, pc}" + : + : "I" (PAGE_SIZE)); +} + +void feroceon_copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr) +{ + void *kto, *kfrom; + + kto = kmap_atomic(to, KM_USER0); + kfrom = kmap_atomic(from, KM_USER1); + feroceon_copy_user_page(kto, kfrom); + kunmap_atomic(kfrom, KM_USER1); + kunmap_atomic(kto, KM_USER0); +} + +void feroceon_clear_user_highpage(struct page *page, unsigned long vaddr) +{ + void *ptr, *kaddr = kmap_atomic(page, KM_USER0); + asm volatile ("\ + mov r1, %2 \n\ + mov r2, #0 \n\ + mov r3, #0 \n\ + mov r4, #0 \n\ + mov r5, #0 \n\ + mov r6, #0 \n\ + mov r7, #0 \n\ + mov ip, #0 \n\ + mov lr, #0 \n\ +1: stmia %0, {r2-r7, ip, lr} \n\ + subs r1, r1, #1 \n\ + mcr p15, 0, %0, c7, c14, 1 @ clean and invalidate D line\n\ + add %0, %0, #32 \n\ + bne 1b \n\ + mcr p15, 0, r1, c7, c10, 4 @ drain WB" + : "=r" (ptr) + : "0" (kaddr), "I" (PAGE_SIZE / 32) + : "r1", "r2", "r3", "r4", "r5", "r6", "r7", "ip", "lr"); + kunmap_atomic(kaddr, KM_USER0); +} + +struct cpu_user_fns feroceon_user_fns __initdata = { + .cpu_clear_user_highpage = feroceon_clear_user_highpage, + .cpu_copy_user_highpage = feroceon_copy_user_highpage, +}; + diff --git a/arch/arm/mm/copypage-v3.S b/arch/arm/mm/copypage-v3.S deleted file mode 100644 index 2ee394b11bcb..000000000000 --- a/arch/arm/mm/copypage-v3.S +++ /dev/null @@ -1,67 +0,0 @@ -/* - * linux/arch/arm/lib/copypage.S - * - * Copyright (C) 1995-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * ASM optimised string functions - */ -#include -#include -#include -#include - - .text - .align 5 -/* - * ARMv3 optimised copy_user_page - * - * FIXME: do we need to handle cache stuff... - */ -ENTRY(v3_copy_user_page) - stmfd sp!, {r4, lr} @ 2 - mov r2, #PAGE_SZ/64 @ 1 - ldmia r1!, {r3, r4, ip, lr} @ 4+1 -1: stmia r0!, {r3, r4, ip, lr} @ 4 - ldmia r1!, {r3, r4, ip, lr} @ 4+1 - stmia r0!, {r3, r4, ip, lr} @ 4 - ldmia r1!, {r3, r4, ip, lr} @ 4+1 - stmia r0!, {r3, r4, ip, lr} @ 4 - ldmia r1!, {r3, r4, ip, lr} @ 4 - subs r2, r2, #1 @ 1 - stmia r0!, {r3, r4, ip, lr} @ 4 - ldmneia r1!, {r3, r4, ip, lr} @ 4 - bne 1b @ 1 - ldmfd sp!, {r4, pc} @ 3 - - .align 5 -/* - * ARMv3 optimised clear_user_page - * - * FIXME: do we need to handle cache stuff... - */ -ENTRY(v3_clear_user_page) - str lr, [sp, #-4]! - mov r1, #PAGE_SZ/64 @ 1 - mov r2, #0 @ 1 - mov r3, #0 @ 1 - mov ip, #0 @ 1 - mov lr, #0 @ 1 -1: stmia r0!, {r2, r3, ip, lr} @ 4 - stmia r0!, {r2, r3, ip, lr} @ 4 - stmia r0!, {r2, r3, ip, lr} @ 4 - stmia r0!, {r2, r3, ip, lr} @ 4 - subs r1, r1, #1 @ 1 - bne 1b @ 1 - ldr pc, [sp], #4 - - __INITDATA - - .type v3_user_fns, #object -ENTRY(v3_user_fns) - .long v3_clear_user_page - .long v3_copy_user_page - .size v3_user_fns, . - v3_user_fns diff --git a/arch/arm/mm/copypage-v3.c b/arch/arm/mm/copypage-v3.c new file mode 100644 index 000000000000..70ed96c8af8e --- /dev/null +++ b/arch/arm/mm/copypage-v3.c @@ -0,0 +1,81 @@ +/* + * linux/arch/arm/mm/copypage-v3.c + * + * Copyright (C) 1995-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + +/* + * ARMv3 optimised copy_user_highpage + * + * FIXME: do we need to handle cache stuff... + */ +static void __attribute__((naked)) +v3_copy_user_page(void *kto, const void *kfrom) +{ + asm("\n\ + stmfd sp!, {r4, lr} @ 2\n\ + mov r2, %2 @ 1\n\ + ldmia %0!, {r3, r4, ip, lr} @ 4+1\n\ +1: stmia %1!, {r3, r4, ip, lr} @ 4\n\ + ldmia %0!, {r3, r4, ip, lr} @ 4+1\n\ + stmia %1!, {r3, r4, ip, lr} @ 4\n\ + ldmia %0!, {r3, r4, ip, lr} @ 4+1\n\ + stmia %1!, {r3, r4, ip, lr} @ 4\n\ + ldmia %0!, {r3, r4, ip, lr} @ 4\n\ + subs r2, r2, #1 @ 1\n\ + stmia %1!, {r3, r4, ip, lr} @ 4\n\ + ldmneia %0!, {r3, r4, ip, lr} @ 4\n\ + bne 1b @ 1\n\ + ldmfd sp!, {r4, pc} @ 3" + : + : "r" (kfrom), "r" (kto), "I" (PAGE_SIZE / 64)); +} + +void v3_copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr) +{ + void *kto, *kfrom; + + kto = kmap_atomic(to, KM_USER0); + kfrom = kmap_atomic(from, KM_USER1); + v3_copy_user_page(kto, kfrom); + kunmap_atomic(kfrom, KM_USER1); + kunmap_atomic(kto, KM_USER0); +} + +/* + * ARMv3 optimised clear_user_page + * + * FIXME: do we need to handle cache stuff... + */ +void v3_clear_user_highpage(struct page *page, unsigned long vaddr) +{ + void *ptr, *kaddr = kmap_atomic(page, KM_USER0); + asm volatile("\n\ + mov r1, %2 @ 1\n\ + mov r2, #0 @ 1\n\ + mov r3, #0 @ 1\n\ + mov ip, #0 @ 1\n\ + mov lr, #0 @ 1\n\ +1: stmia %0!, {r2, r3, ip, lr} @ 4\n\ + stmia %0!, {r2, r3, ip, lr} @ 4\n\ + stmia %0!, {r2, r3, ip, lr} @ 4\n\ + stmia %0!, {r2, r3, ip, lr} @ 4\n\ + subs r1, r1, #1 @ 1\n\ + bne 1b @ 1" + : "=r" (ptr) + : "0" (kaddr), "I" (PAGE_SIZE / 64) + : "r1", "r2", "r3", "ip", "lr"); + kunmap_atomic(kaddr, KM_USER0); +} + +struct cpu_user_fns v3_user_fns __initdata = { + .cpu_clear_user_highpage = v3_clear_user_highpage, + .cpu_copy_user_highpage = v3_copy_user_highpage, +}; diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index 8d33e2549344..bdb5fd983b15 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -15,8 +15,8 @@ */ #include #include +#include -#include #include #include #include @@ -33,7 +33,7 @@ static DEFINE_SPINLOCK(minicache_lock); /* - * ARMv4 mini-dcache optimised copy_user_page + * ARMv4 mini-dcache optimised copy_user_highpage * * We flush the destination cache lines just before we write the data into the * corresponding address. Since the Dcache is read-allocate, this removes the @@ -42,7 +42,7 @@ static DEFINE_SPINLOCK(minicache_lock); * * Note: We rely on all ARMv4 processors implementing the "invalidate D line" * instruction. If your processor does not supply this, you have to write your - * own copy_user_page that does the right thing. + * own copy_user_highpage that does the right thing. */ static void __attribute__((naked)) mc_copy_user_page(void *from, void *to) @@ -68,50 +68,53 @@ mc_copy_user_page(void *from, void *to) : "r" (from), "r" (to), "I" (PAGE_SIZE / 64)); } -void v4_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr) +void v4_mc_copy_user_highpage(struct page *from, struct page *to, + unsigned long vaddr) { - struct page *page = virt_to_page(kfrom); + void *kto = kmap_atomic(to, KM_USER1); - if (test_and_clear_bit(PG_dcache_dirty, &page->flags)) - __flush_dcache_page(page_mapping(page), page); + if (test_and_clear_bit(PG_dcache_dirty, &from->flags)) + __flush_dcache_page(page_mapping(from), from); spin_lock(&minicache_lock); - set_pte_ext(TOP_PTE(0xffff8000), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot), 0); + set_pte_ext(TOP_PTE(0xffff8000), pfn_pte(page_to_pfn(from), minicache_pgprot), 0); flush_tlb_kernel_page(0xffff8000); mc_copy_user_page((void *)0xffff8000, kto); spin_unlock(&minicache_lock); + + kunmap_atomic(kto, KM_USER1); } /* * ARMv4 optimised clear_user_page */ -void __attribute__((naked)) -v4_mc_clear_user_page(void *kaddr, unsigned long vaddr) +void v4_mc_clear_user_highpage(struct page *page, unsigned long vaddr) { - asm volatile( - "str lr, [sp, #-4]!\n\ - mov r1, %0 @ 1\n\ + void *ptr, *kaddr = kmap_atomic(page, KM_USER0); + asm volatile("\ + mov r1, %2 @ 1\n\ mov r2, #0 @ 1\n\ mov r3, #0 @ 1\n\ mov ip, #0 @ 1\n\ mov lr, #0 @ 1\n\ -1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\ - stmia r0!, {r2, r3, ip, lr} @ 4\n\ - stmia r0!, {r2, r3, ip, lr} @ 4\n\ - mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\ - stmia r0!, {r2, r3, ip, lr} @ 4\n\ - stmia r0!, {r2, r3, ip, lr} @ 4\n\ +1: mcr p15, 0, %0, c7, c6, 1 @ 1 invalidate D line\n\ + stmia %0!, {r2, r3, ip, lr} @ 4\n\ + stmia %0!, {r2, r3, ip, lr} @ 4\n\ + mcr p15, 0, %0, c7, c6, 1 @ 1 invalidate D line\n\ + stmia %0!, {r2, r3, ip, lr} @ 4\n\ + stmia %0!, {r2, r3, ip, lr} @ 4\n\ subs r1, r1, #1 @ 1\n\ - bne 1b @ 1\n\ - ldr pc, [sp], #4" - : - : "I" (PAGE_SIZE / 64)); + bne 1b @ 1" + : "=r" (ptr) + : "0" (kaddr), "I" (PAGE_SIZE / 64) + : "r1", "r2", "r3", "ip", "lr"); + kunmap_atomic(kaddr, KM_USER0); } struct cpu_user_fns v4_mc_user_fns __initdata = { - .cpu_clear_user_page = v4_mc_clear_user_page, - .cpu_copy_user_page = v4_mc_copy_user_page, + .cpu_clear_user_highpage = v4_mc_clear_user_highpage, + .cpu_copy_user_highpage = v4_mc_copy_user_highpage, }; diff --git a/arch/arm/mm/copypage-v4wb.S b/arch/arm/mm/copypage-v4wb.S deleted file mode 100644 index 83117354b1cd..000000000000 --- a/arch/arm/mm/copypage-v4wb.S +++ /dev/null @@ -1,79 +0,0 @@ -/* - * linux/arch/arm/lib/copypage.S - * - * Copyright (C) 1995-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * ASM optimised string functions - */ -#include -#include -#include - - .text - .align 5 -/* - * ARMv4 optimised copy_user_page - * - * We flush the destination cache lines just before we write the data into the - * corresponding address. Since the Dcache is read-allocate, this removes the - * Dcache aliasing issue. The writes will be forwarded to the write buffer, - * and merged as appropriate. - * - * Note: We rely on all ARMv4 processors implementing the "invalidate D line" - * instruction. If your processor does not supply this, you have to write your - * own copy_user_page that does the right thing. - */ -ENTRY(v4wb_copy_user_page) - stmfd sp!, {r4, lr} @ 2 - mov r2, #PAGE_SZ/64 @ 1 - ldmia r1!, {r3, r4, ip, lr} @ 4 -1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line - stmia r0!, {r3, r4, ip, lr} @ 4 - ldmia r1!, {r3, r4, ip, lr} @ 4+1 - stmia r0!, {r3, r4, ip, lr} @ 4 - ldmia r1!, {r3, r4, ip, lr} @ 4 - mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line - stmia r0!, {r3, r4, ip, lr} @ 4 - ldmia r1!, {r3, r4, ip, lr} @ 4 - subs r2, r2, #1 @ 1 - stmia r0!, {r3, r4, ip, lr} @ 4 - ldmneia r1!, {r3, r4, ip, lr} @ 4 - bne 1b @ 1 - mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB - ldmfd sp!, {r4, pc} @ 3 - - .align 5 -/* - * ARMv4 optimised clear_user_page - * - * Same story as above. - */ -ENTRY(v4wb_clear_user_page) - str lr, [sp, #-4]! - mov r1, #PAGE_SZ/64 @ 1 - mov r2, #0 @ 1 - mov r3, #0 @ 1 - mov ip, #0 @ 1 - mov lr, #0 @ 1 -1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line - stmia r0!, {r2, r3, ip, lr} @ 4 - stmia r0!, {r2, r3, ip, lr} @ 4 - mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line - stmia r0!, {r2, r3, ip, lr} @ 4 - stmia r0!, {r2, r3, ip, lr} @ 4 - subs r1, r1, #1 @ 1 - bne 1b @ 1 - mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB - ldr pc, [sp], #4 - - __INITDATA - - .type v4wb_user_fns, #object -ENTRY(v4wb_user_fns) - .long v4wb_clear_user_page - .long v4wb_copy_user_page - .size v4wb_user_fns, . - v4wb_user_fns diff --git a/arch/arm/mm/copypage-v4wb.c b/arch/arm/mm/copypage-v4wb.c new file mode 100644 index 000000000000..3ec93dab7656 --- /dev/null +++ b/arch/arm/mm/copypage-v4wb.c @@ -0,0 +1,94 @@ +/* + * linux/arch/arm/mm/copypage-v4wb.c + * + * Copyright (C) 1995-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + +/* + * ARMv4 optimised copy_user_highpage + * + * We flush the destination cache lines just before we write the data into the + * corresponding address. Since the Dcache is read-allocate, this removes the + * Dcache aliasing issue. The writes will be forwarded to the write buffer, + * and merged as appropriate. + * + * Note: We rely on all ARMv4 processors implementing the "invalidate D line" + * instruction. If your processor does not supply this, you have to write your + * own copy_user_highpage that does the right thing. + */ +static void __attribute__((naked)) +v4wb_copy_user_page(void *kto, const void *kfrom) +{ + asm("\ + stmfd sp!, {r4, lr} @ 2\n\ + mov r2, %0 @ 1\n\ + ldmia r1!, {r3, r4, ip, lr} @ 4\n\ +1: mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\ + stmia r0!, {r3, r4, ip, lr} @ 4\n\ + ldmia r1!, {r3, r4, ip, lr} @ 4+1\n\ + stmia r0!, {r3, r4, ip, lr} @ 4\n\ + ldmia r1!, {r3, r4, ip, lr} @ 4\n\ + mcr p15, 0, r0, c7, c6, 1 @ 1 invalidate D line\n\ + stmia r0!, {r3, r4, ip, lr} @ 4\n\ + ldmia r1!, {r3, r4, ip, lr} @ 4\n\ + subs r2, r2, #1 @ 1\n\ + stmia r0!, {r3, r4, ip, lr} @ 4\n\ + ldmneia r1!, {r3, r4, ip, lr} @ 4\n\ + bne 1b @ 1\n\ + mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB\n\ + ldmfd sp!, {r4, pc} @ 3" + : + : "I" (PAGE_SIZE / 64)); +} + +void v4wb_copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr) +{ + void *kto, *kfrom; + + kto = kmap_atomic(to, KM_USER0); + kfrom = kmap_atomic(from, KM_USER1); + v4wb_copy_user_page(kto, kfrom); + kunmap_atomic(kfrom, KM_USER1); + kunmap_atomic(kto, KM_USER0); +} + +/* + * ARMv4 optimised clear_user_page + * + * Same story as above. + */ +void v4wb_clear_user_highpage(struct page *page, unsigned long vaddr) +{ + void *ptr, *kaddr = kmap_atomic(page, KM_USER0); + asm volatile("\ + mov r1, %2 @ 1\n\ + mov r2, #0 @ 1\n\ + mov r3, #0 @ 1\n\ + mov ip, #0 @ 1\n\ + mov lr, #0 @ 1\n\ +1: mcr p15, 0, %0, c7, c6, 1 @ 1 invalidate D line\n\ + stmia %0!, {r2, r3, ip, lr} @ 4\n\ + stmia %0!, {r2, r3, ip, lr} @ 4\n\ + mcr p15, 0, %0, c7, c6, 1 @ 1 invalidate D line\n\ + stmia %0!, {r2, r3, ip, lr} @ 4\n\ + stmia %0!, {r2, r3, ip, lr} @ 4\n\ + subs r1, r1, #1 @ 1\n\ + bne 1b @ 1\n\ + mcr p15, 0, r1, c7, c10, 4 @ 1 drain WB" + : "=r" (ptr) + : "0" (kaddr), "I" (PAGE_SIZE / 64) + : "r1", "r2", "r3", "ip", "lr"); + kunmap_atomic(kaddr, KM_USER0); +} + +struct cpu_user_fns v4wb_user_fns __initdata = { + .cpu_clear_user_highpage = v4wb_clear_user_highpage, + .cpu_copy_user_highpage = v4wb_copy_user_highpage, +}; diff --git a/arch/arm/mm/copypage-v4wt.S b/arch/arm/mm/copypage-v4wt.S deleted file mode 100644 index e1f2af28d549..000000000000 --- a/arch/arm/mm/copypage-v4wt.S +++ /dev/null @@ -1,73 +0,0 @@ -/* - * linux/arch/arm/lib/copypage-v4.S - * - * Copyright (C) 1995-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * ASM optimised string functions - * - * This is for CPUs with a writethrough cache and 'flush ID cache' is - * the only supported cache operation. - */ -#include -#include -#include - - .text - .align 5 -/* - * ARMv4 optimised copy_user_page - * - * Since we have writethrough caches, we don't have to worry about - * dirty data in the cache. However, we do have to ensure that - * subsequent reads are up to date. - */ -ENTRY(v4wt_copy_user_page) - stmfd sp!, {r4, lr} @ 2 - mov r2, #PAGE_SZ/64 @ 1 - ldmia r1!, {r3, r4, ip, lr} @ 4 -1: stmia r0!, {r3, r4, ip, lr} @ 4 - ldmia r1!, {r3, r4, ip, lr} @ 4+1 - stmia r0!, {r3, r4, ip, lr} @ 4 - ldmia r1!, {r3, r4, ip, lr} @ 4 - stmia r0!, {r3, r4, ip, lr} @ 4 - ldmia r1!, {r3, r4, ip, lr} @ 4 - subs r2, r2, #1 @ 1 - stmia r0!, {r3, r4, ip, lr} @ 4 - ldmneia r1!, {r3, r4, ip, lr} @ 4 - bne 1b @ 1 - mcr p15, 0, r2, c7, c7, 0 @ flush ID cache - ldmfd sp!, {r4, pc} @ 3 - - .align 5 -/* - * ARMv4 optimised clear_user_page - * - * Same story as above. - */ -ENTRY(v4wt_clear_user_page) - str lr, [sp, #-4]! - mov r1, #PAGE_SZ/64 @ 1 - mov r2, #0 @ 1 - mov r3, #0 @ 1 - mov ip, #0 @ 1 - mov lr, #0 @ 1 -1: stmia r0!, {r2, r3, ip, lr} @ 4 - stmia r0!, {r2, r3, ip, lr} @ 4 - stmia r0!, {r2, r3, ip, lr} @ 4 - stmia r0!, {r2, r3, ip, lr} @ 4 - subs r1, r1, #1 @ 1 - bne 1b @ 1 - mcr p15, 0, r2, c7, c7, 0 @ flush ID cache - ldr pc, [sp], #4 - - __INITDATA - - .type v4wt_user_fns, #object -ENTRY(v4wt_user_fns) - .long v4wt_clear_user_page - .long v4wt_copy_user_page - .size v4wt_user_fns, . - v4wt_user_fns diff --git a/arch/arm/mm/copypage-v4wt.c b/arch/arm/mm/copypage-v4wt.c new file mode 100644 index 000000000000..0f1188efae45 --- /dev/null +++ b/arch/arm/mm/copypage-v4wt.c @@ -0,0 +1,88 @@ +/* + * linux/arch/arm/mm/copypage-v4wt.S + * + * Copyright (C) 1995-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This is for CPUs with a writethrough cache and 'flush ID cache' is + * the only supported cache operation. + */ +#include +#include + +/* + * ARMv4 optimised copy_user_highpage + * + * Since we have writethrough caches, we don't have to worry about + * dirty data in the cache. However, we do have to ensure that + * subsequent reads are up to date. + */ +static void __attribute__((naked)) +v4wt_copy_user_page(void *kto, const void *kfrom) +{ + asm("\ + stmfd sp!, {r4, lr} @ 2\n\ + mov r2, %0 @ 1\n\ + ldmia r1!, {r3, r4, ip, lr} @ 4\n\ +1: stmia r0!, {r3, r4, ip, lr} @ 4\n\ + ldmia r1!, {r3, r4, ip, lr} @ 4+1\n\ + stmia r0!, {r3, r4, ip, lr} @ 4\n\ + ldmia r1!, {r3, r4, ip, lr} @ 4\n\ + stmia r0!, {r3, r4, ip, lr} @ 4\n\ + ldmia r1!, {r3, r4, ip, lr} @ 4\n\ + subs r2, r2, #1 @ 1\n\ + stmia r0!, {r3, r4, ip, lr} @ 4\n\ + ldmneia r1!, {r3, r4, ip, lr} @ 4\n\ + bne 1b @ 1\n\ + mcr p15, 0, r2, c7, c7, 0 @ flush ID cache\n\ + ldmfd sp!, {r4, pc} @ 3" + : + : "I" (PAGE_SIZE / 64)); +} + +void v4wt_copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr) +{ + void *kto, *kfrom; + + kto = kmap_atomic(to, KM_USER0); + kfrom = kmap_atomic(from, KM_USER1); + v4wt_copy_user_page(kto, kfrom); + kunmap_atomic(kfrom, KM_USER1); + kunmap_atomic(kto, KM_USER0); +} + +/* + * ARMv4 optimised clear_user_page + * + * Same story as above. + */ +void v4wt_clear_user_highpage(struct page *page, unsigned long vaddr) +{ + void *ptr, *kaddr = kmap_atomic(page, KM_USER0); + asm volatile("\ + mov r1, %2 @ 1\n\ + mov r2, #0 @ 1\n\ + mov r3, #0 @ 1\n\ + mov ip, #0 @ 1\n\ + mov lr, #0 @ 1\n\ +1: stmia %0!, {r2, r3, ip, lr} @ 4\n\ + stmia %0!, {r2, r3, ip, lr} @ 4\n\ + stmia %0!, {r2, r3, ip, lr} @ 4\n\ + stmia %0!, {r2, r3, ip, lr} @ 4\n\ + subs r1, r1, #1 @ 1\n\ + bne 1b @ 1\n\ + mcr p15, 0, r2, c7, c7, 0 @ flush ID cache" + : "=r" (ptr) + : "0" (kaddr), "I" (PAGE_SIZE / 64) + : "r1", "r2", "r3", "ip", "lr"); + kunmap_atomic(kaddr, KM_USER0); +} + +struct cpu_user_fns v4wt_user_fns __initdata = { + .cpu_clear_user_highpage = v4wt_clear_user_highpage, + .cpu_copy_user_highpage = v4wt_copy_user_highpage, +}; diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index 0e21c0767580..4127a7bddfe5 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -10,8 +10,8 @@ #include #include #include +#include -#include #include #include #include @@ -33,41 +33,56 @@ static DEFINE_SPINLOCK(v6_lock); * Copy the user page. No aliasing to deal with so we can just * attack the kernel's existing mapping of these pages. */ -static void v6_copy_user_page_nonaliasing(void *kto, const void *kfrom, unsigned long vaddr) +static void v6_copy_user_highpage_nonaliasing(struct page *to, + struct page *from, unsigned long vaddr) { + void *kto, *kfrom; + + kfrom = kmap_atomic(from, KM_USER0); + kto = kmap_atomic(to, KM_USER1); copy_page(kto, kfrom); + kunmap_atomic(kto, KM_USER1); + kunmap_atomic(kfrom, KM_USER0); } /* * Clear the user page. No aliasing to deal with so we can just * attack the kernel's existing mapping of this page. */ -static void v6_clear_user_page_nonaliasing(void *kaddr, unsigned long vaddr) +static void v6_clear_user_highpage_nonaliasing(struct page *page, unsigned long vaddr) { + void *kaddr = kmap_atomic(page, KM_USER0); clear_page(kaddr); + kunmap_atomic(kaddr, KM_USER0); } /* - * Copy the page, taking account of the cache colour. + * Discard data in the kernel mapping for the new page. + * FIXME: needs this MCRR to be supported. */ -static void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vaddr) +static void discard_old_kernel_data(void *kto) { - unsigned int offset = CACHE_COLOUR(vaddr); - unsigned long from, to; - struct page *page = virt_to_page(kfrom); - - if (test_and_clear_bit(PG_dcache_dirty, &page->flags)) - __flush_dcache_page(page_mapping(page), page); - - /* - * Discard data in the kernel mapping for the new page. - * FIXME: needs this MCRR to be supported. - */ __asm__("mcrr p15, 0, %1, %0, c6 @ 0xec401f06" : : "r" (kto), "r" ((unsigned long)kto + PAGE_SIZE - L1_CACHE_BYTES) : "cc"); +} + +/* + * Copy the page, taking account of the cache colour. + */ +static void v6_copy_user_highpage_aliasing(struct page *to, + struct page *from, unsigned long vaddr) +{ + unsigned int offset = CACHE_COLOUR(vaddr); + unsigned long kfrom, kto; + + if (test_and_clear_bit(PG_dcache_dirty, &from->flags)) + __flush_dcache_page(page_mapping(from), from); + + /* FIXME: not highmem safe */ + discard_old_kernel_data(page_address(to)); /* * Now copy the page using the same cache colour as the @@ -75,16 +90,16 @@ static void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned lo */ spin_lock(&v6_lock); - set_pte_ext(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, PAGE_KERNEL), 0); - set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, PAGE_KERNEL), 0); + set_pte_ext(TOP_PTE(from_address) + offset, pfn_pte(page_to_pfn(from), PAGE_KERNEL), 0); + set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(page_to_pfn(to), PAGE_KERNEL), 0); - from = from_address + (offset << PAGE_SHIFT); - to = to_address + (offset << PAGE_SHIFT); + kfrom = from_address + (offset << PAGE_SHIFT); + kto = to_address + (offset << PAGE_SHIFT); - flush_tlb_kernel_page(from); - flush_tlb_kernel_page(to); + flush_tlb_kernel_page(kfrom); + flush_tlb_kernel_page(kto); - copy_page((void *)to, (void *)from); + copy_page((void *)kto, (void *)kfrom); spin_unlock(&v6_lock); } @@ -94,20 +109,13 @@ static void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned lo * so remap the kernel page into the same cache colour as the user * page. */ -static void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr) +static void v6_clear_user_highpage_aliasing(struct page *page, unsigned long vaddr) { unsigned int offset = CACHE_COLOUR(vaddr); unsigned long to = to_address + (offset << PAGE_SHIFT); - /* - * Discard data in the kernel mapping for the new page - * FIXME: needs this MCRR to be supported. - */ - __asm__("mcrr p15, 0, %1, %0, c6 @ 0xec401f06" - : - : "r" (kaddr), - "r" ((unsigned long)kaddr + PAGE_SIZE - L1_CACHE_BYTES) - : "cc"); + /* FIXME: not highmem safe */ + discard_old_kernel_data(page_address(page)); /* * Now clear the page using the same cache colour as @@ -115,7 +123,7 @@ static void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr) */ spin_lock(&v6_lock); - set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, PAGE_KERNEL), 0); + set_pte_ext(TOP_PTE(to_address) + offset, pfn_pte(page_to_pfn(page), PAGE_KERNEL), 0); flush_tlb_kernel_page(to); clear_page((void *)to); @@ -123,15 +131,15 @@ static void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr) } struct cpu_user_fns v6_user_fns __initdata = { - .cpu_clear_user_page = v6_clear_user_page_nonaliasing, - .cpu_copy_user_page = v6_copy_user_page_nonaliasing, + .cpu_clear_user_highpage = v6_clear_user_highpage_nonaliasing, + .cpu_copy_user_highpage = v6_copy_user_highpage_nonaliasing, }; static int __init v6_userpage_init(void) { if (cache_is_vipt_aliasing()) { - cpu_user.cpu_clear_user_page = v6_clear_user_page_aliasing; - cpu_user.cpu_copy_user_page = v6_copy_user_page_aliasing; + cpu_user.cpu_clear_user_highpage = v6_clear_user_highpage_aliasing; + cpu_user.cpu_copy_user_highpage = v6_copy_user_highpage_aliasing; } return 0; diff --git a/arch/arm/mm/copypage-xsc3.S b/arch/arm/mm/copypage-xsc3.S deleted file mode 100644 index 9a2cb4332b4c..000000000000 --- a/arch/arm/mm/copypage-xsc3.S +++ /dev/null @@ -1,97 +0,0 @@ -/* - * linux/arch/arm/lib/copypage-xsc3.S - * - * Copyright (C) 2004 Intel Corp. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Adapted for 3rd gen XScale core, no more mini-dcache - * Author: Matt Gilbert (matthew.m.gilbert@intel.com) - */ - -#include -#include -#include - -/* - * General note: - * We don't really want write-allocate cache behaviour for these functions - * since that will just eat through 8K of the cache. - */ - - .text - .align 5 -/* - * XSC3 optimised copy_user_page - * r0 = destination - * r1 = source - * r2 = virtual user address of ultimate destination page - * - * The source page may have some clean entries in the cache already, but we - * can safely ignore them - break_cow() will flush them out of the cache - * if we eventually end up using our copied page. - * - */ -ENTRY(xsc3_mc_copy_user_page) - stmfd sp!, {r4, r5, lr} - mov lr, #PAGE_SZ/64-1 - - pld [r1, #0] - pld [r1, #32] -1: pld [r1, #64] - pld [r1, #96] - -2: ldrd r2, [r1], #8 - mov ip, r0 - ldrd r4, [r1], #8 - mcr p15, 0, ip, c7, c6, 1 @ invalidate - strd r2, [r0], #8 - ldrd r2, [r1], #8 - strd r4, [r0], #8 - ldrd r4, [r1], #8 - strd r2, [r0], #8 - strd r4, [r0], #8 - ldrd r2, [r1], #8 - mov ip, r0 - ldrd r4, [r1], #8 - mcr p15, 0, ip, c7, c6, 1 @ invalidate - strd r2, [r0], #8 - ldrd r2, [r1], #8 - subs lr, lr, #1 - strd r4, [r0], #8 - ldrd r4, [r1], #8 - strd r2, [r0], #8 - strd r4, [r0], #8 - bgt 1b - beq 2b - - ldmfd sp!, {r4, r5, pc} - - .align 5 -/* - * XScale optimised clear_user_page - * r0 = destination - * r1 = virtual user address of ultimate destination page - */ -ENTRY(xsc3_mc_clear_user_page) - mov r1, #PAGE_SZ/32 - mov r2, #0 - mov r3, #0 -1: mcr p15, 0, r0, c7, c6, 1 @ invalidate line - strd r2, [r0], #8 - strd r2, [r0], #8 - strd r2, [r0], #8 - strd r2, [r0], #8 - subs r1, r1, #1 - bne 1b - mov pc, lr - - __INITDATA - - .type xsc3_mc_user_fns, #object -ENTRY(xsc3_mc_user_fns) - .long xsc3_mc_clear_user_page - .long xsc3_mc_copy_user_page - .size xsc3_mc_user_fns, . - xsc3_mc_user_fns diff --git a/arch/arm/mm/copypage-xsc3.c b/arch/arm/mm/copypage-xsc3.c new file mode 100644 index 000000000000..39a994542cad --- /dev/null +++ b/arch/arm/mm/copypage-xsc3.c @@ -0,0 +1,113 @@ +/* + * linux/arch/arm/mm/copypage-xsc3.S + * + * Copyright (C) 2004 Intel Corp. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Adapted for 3rd gen XScale core, no more mini-dcache + * Author: Matt Gilbert (matthew.m.gilbert@intel.com) + */ +#include +#include + +/* + * General note: + * We don't really want write-allocate cache behaviour for these functions + * since that will just eat through 8K of the cache. + */ + +/* + * XSC3 optimised copy_user_highpage + * r0 = destination + * r1 = source + * + * The source page may have some clean entries in the cache already, but we + * can safely ignore them - break_cow() will flush them out of the cache + * if we eventually end up using our copied page. + * + */ +static void __attribute__((naked)) +xsc3_mc_copy_user_page(void *kto, const void *kfrom) +{ + asm("\ + stmfd sp!, {r4, r5, lr} \n\ + mov lr, %0 \n\ + \n\ + pld [r1, #0] \n\ + pld [r1, #32] \n\ +1: pld [r1, #64] \n\ + pld [r1, #96] \n\ + \n\ +2: ldrd r2, [r1], #8 \n\ + mov ip, r0 \n\ + ldrd r4, [r1], #8 \n\ + mcr p15, 0, ip, c7, c6, 1 @ invalidate\n\ + strd r2, [r0], #8 \n\ + ldrd r2, [r1], #8 \n\ + strd r4, [r0], #8 \n\ + ldrd r4, [r1], #8 \n\ + strd r2, [r0], #8 \n\ + strd r4, [r0], #8 \n\ + ldrd r2, [r1], #8 \n\ + mov ip, r0 \n\ + ldrd r4, [r1], #8 \n\ + mcr p15, 0, ip, c7, c6, 1 @ invalidate\n\ + strd r2, [r0], #8 \n\ + ldrd r2, [r1], #8 \n\ + subs lr, lr, #1 \n\ + strd r4, [r0], #8 \n\ + ldrd r4, [r1], #8 \n\ + strd r2, [r0], #8 \n\ + strd r4, [r0], #8 \n\ + bgt 1b \n\ + beq 2b \n\ + \n\ + ldmfd sp!, {r4, r5, pc}" + : + : "I" (PAGE_SIZE / 64 - 1)); +} + +void xsc3_mc_copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr) +{ + void *kto, *kfrom; + + kto = kmap_atomic(to, KM_USER0); + kfrom = kmap_atomic(from, KM_USER1); + xsc3_mc_copy_user_page(kto, kfrom); + kunmap_atomic(kfrom, KM_USER1); + kunmap_atomic(kto, KM_USER0); +} + +/* + * XScale optimised clear_user_page + * r0 = destination + * r1 = virtual user address of ultimate destination page + */ +void xsc3_mc_clear_user_highpage(struct page *page, unsigned long vaddr) +{ + void *ptr, *kaddr = kmap_atomic(page, KM_USER0); + asm volatile ("\ + mov r1, %2 \n\ + mov r2, #0 \n\ + mov r3, #0 \n\ +1: mcr p15, 0, %0, c7, c6, 1 @ invalidate line\n\ + strd r2, [%0], #8 \n\ + strd r2, [%0], #8 \n\ + strd r2, [%0], #8 \n\ + strd r2, [%0], #8 \n\ + subs r1, r1, #1 \n\ + bne 1b" + : "=r" (ptr) + : "0" (kaddr), "I" (PAGE_SIZE / 32) + : "r1", "r2", "r3"); + kunmap_atomic(kaddr, KM_USER0); +} + +struct cpu_user_fns xsc3_mc_user_fns __initdata = { + .cpu_clear_user_highpage = xsc3_mc_clear_user_highpage, + .cpu_copy_user_highpage = xsc3_mc_copy_user_highpage, +}; diff --git a/arch/arm/mm/copypage-xscale.c b/arch/arm/mm/copypage-xscale.c index bad49331bbf9..d18f2397ee2d 100644 --- a/arch/arm/mm/copypage-xscale.c +++ b/arch/arm/mm/copypage-xscale.c @@ -15,8 +15,8 @@ */ #include #include +#include -#include #include #include #include @@ -35,7 +35,7 @@ static DEFINE_SPINLOCK(minicache_lock); /* - * XScale mini-dcache optimised copy_user_page + * XScale mini-dcache optimised copy_user_highpage * * We flush the destination cache lines just before we write the data into the * corresponding address. Since the Dcache is read-allocate, this removes the @@ -90,48 +90,53 @@ mc_copy_user_page(void *from, void *to) : "r" (from), "r" (to), "I" (PAGE_SIZE / 64 - 1)); } -void xscale_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr) +void xscale_mc_copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr) { - struct page *page = virt_to_page(kfrom); + void *kto = kmap_atomic(to, KM_USER1); - if (test_and_clear_bit(PG_dcache_dirty, &page->flags)) - __flush_dcache_page(page_mapping(page), page); + if (test_and_clear_bit(PG_dcache_dirty, &from->flags)) + __flush_dcache_page(page_mapping(from), from); spin_lock(&minicache_lock); - set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot), 0); + set_pte_ext(TOP_PTE(COPYPAGE_MINICACHE), pfn_pte(page_to_pfn(from), minicache_pgprot), 0); flush_tlb_kernel_page(COPYPAGE_MINICACHE); mc_copy_user_page((void *)COPYPAGE_MINICACHE, kto); spin_unlock(&minicache_lock); + + kunmap_atomic(kto, KM_USER1); } /* * XScale optimised clear_user_page */ -void __attribute__((naked)) -xscale_mc_clear_user_page(void *kaddr, unsigned long vaddr) +void +xscale_mc_clear_user_highpage(struct page *page, unsigned long vaddr) { + void *ptr, *kaddr = kmap_atomic(page, KM_USER0); asm volatile( - "mov r1, %0 \n\ + "mov r1, %2 \n\ mov r2, #0 \n\ mov r3, #0 \n\ -1: mov ip, r0 \n\ - strd r2, [r0], #8 \n\ - strd r2, [r0], #8 \n\ - strd r2, [r0], #8 \n\ - strd r2, [r0], #8 \n\ +1: mov ip, %0 \n\ + strd r2, [%0], #8 \n\ + strd r2, [%0], #8 \n\ + strd r2, [%0], #8 \n\ + strd r2, [%0], #8 \n\ mcr p15, 0, ip, c7, c10, 1 @ clean D line\n\ subs r1, r1, #1 \n\ mcr p15, 0, ip, c7, c6, 1 @ invalidate D line\n\ - bne 1b \n\ - mov pc, lr" - : - : "I" (PAGE_SIZE / 32)); + bne 1b" + : "=r" (ptr) + : "0" (kaddr), "I" (PAGE_SIZE / 32) + : "r1", "r2", "r3", "ip"); + kunmap_atomic(kaddr, KM_USER0); } struct cpu_user_fns xscale_mc_user_fns __initdata = { - .cpu_clear_user_page = xscale_mc_clear_user_page, - .cpu_copy_user_page = xscale_mc_copy_user_page, + .cpu_clear_user_highpage = xscale_mc_clear_user_highpage, + .cpu_copy_user_highpage = xscale_mc_copy_user_highpage, }; diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 2df8d9facf57..ffd8b228a139 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -83,13 +84,14 @@ void show_pte(struct mm_struct *mm, unsigned long addr) break; } -#ifndef CONFIG_HIGHMEM /* We must not map this if we have highmem enabled */ + if (PageHighMem(pfn_to_page(pmd_val(*pmd) >> PAGE_SHIFT))) + break; + pte = pte_offset_map(pmd, addr); printk(", *pte=%08lx", pte_val(*pte)); printk(", *ppte=%08lx", pte_val(pte[-PTRS_PER_PTE])); pte_unmap(pte); -#endif } while(0); printk("\n"); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 82c4b4217989..ab5c9abd5c34 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -64,10 +64,11 @@ static int __init parse_tag_initrd2(const struct tag *tag) __tagtable(ATAG_INITRD2, parse_tag_initrd2); /* - * This is used to pass memory configuration data from paging_init - * to mem_init, and by show_mem() to skip holes in the memory map. + * This keeps memory configuration data used by a couple memory + * initialization functions, as well as show_mem() for the skipping + * of holes in the memory map. It is populated by arm_add_memory(). */ -static struct meminfo meminfo = { 0, }; +struct meminfo meminfo; void show_mem(void) { @@ -331,13 +332,12 @@ static void __init bootmem_free_node(int node, struct meminfo *mi) free_area_init_node(node, zone_size, start_pfn, zhole_size); } -void __init bootmem_init(struct meminfo *mi) +void __init bootmem_init(void) { + struct meminfo *mi = &meminfo; unsigned long memend_pfn = 0; int node, initrd_node; - memcpy(&meminfo, mi, sizeof(meminfo)); - /* * Locate which node contains the ramdisk image, if any. */ @@ -394,20 +394,22 @@ void __init bootmem_init(struct meminfo *mi) max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET; } -static inline void free_area(unsigned long addr, unsigned long end, char *s) +static inline int free_area(unsigned long pfn, unsigned long end, char *s) { - unsigned int size = (end - addr) >> 10; + unsigned int pages = 0, size = (end - pfn) << (PAGE_SHIFT - 10); - for (; addr < end; addr += PAGE_SIZE) { - struct page *page = virt_to_page(addr); + for (; pfn < end; pfn++) { + struct page *page = pfn_to_page(pfn); ClearPageReserved(page); init_page_count(page); - free_page(addr); - totalram_pages++; + __free_page(page); + pages++; } if (size && s) printk(KERN_INFO "Freeing %s memory: %dK\n", s, size); + + return pages; } static inline void @@ -478,13 +480,9 @@ static void __init free_unused_memmap_node(int node, struct meminfo *mi) */ void __init mem_init(void) { - unsigned int codepages, datapages, initpages; + unsigned int codesize, datasize, initsize; int i, node; - codepages = &_etext - &_text; - datapages = &_end - &__data_start; - initpages = &__init_end - &__init_begin; - #ifndef CONFIG_DISCONTIGMEM max_mapnr = virt_to_page(high_memory) - mem_map; #endif @@ -501,7 +499,8 @@ void __init mem_init(void) #ifdef CONFIG_SA1111 /* now that our DMA memory is actually so designated, we can free it */ - free_area(PAGE_OFFSET, (unsigned long)swapper_pg_dir, NULL); + totalram_pages += free_area(PHYS_PFN_OFFSET, + __phys_to_pfn(__pa(swapper_pg_dir)), NULL); #endif /* @@ -509,18 +508,21 @@ void __init mem_init(void) * real number of pages we have in this system */ printk(KERN_INFO "Memory:"); - num_physpages = 0; for (i = 0; i < meminfo.nr_banks; i++) { num_physpages += bank_pfn_size(&meminfo.bank[i]); printk(" %ldMB", bank_phys_size(&meminfo.bank[i]) >> 20); } - printk(" = %luMB total\n", num_physpages >> (20 - PAGE_SHIFT)); + + codesize = &_etext - &_text; + datasize = &_end - &__data_start; + initsize = &__init_end - &__init_begin; + printk(KERN_NOTICE "Memory: %luKB available (%dK code, " "%dK data, %dK init)\n", (unsigned long) nr_free_pages() << (PAGE_SHIFT-10), - codepages >> 10, datapages >> 10, initpages >> 10); + codesize >> 10, datasize >> 10, initsize >> 10); if (PAGE_SIZE >= 16384 && num_physpages <= 128) { extern int sysctl_overcommit_memory; @@ -535,11 +537,10 @@ void __init mem_init(void) void free_initmem(void) { - if (!machine_is_integrator() && !machine_is_cintegrator()) { - free_area((unsigned long)(&__init_begin), - (unsigned long)(&__init_end), - "init"); - } + if (!machine_is_integrator() && !machine_is_cintegrator()) + totalram_pages += free_area(__phys_to_pfn(__pa(&__init_begin)), + __phys_to_pfn(__pa(&__init_end)), + "init"); } #ifdef CONFIG_BLK_DEV_INITRD @@ -549,7 +550,9 @@ static int keep_initrd; void free_initrd_mem(unsigned long start, unsigned long end) { if (!keep_initrd) - free_area(start, end, "initrd"); + totalram_pages += free_area(__phys_to_pfn(__pa(start)), + __phys_to_pfn(__pa(end)), + "initrd"); } static int __init keepinitrd_setup(char *__unused) diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 5d9f53907b4e..94367bdbb5a8 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -32,7 +32,7 @@ struct meminfo; struct pglist_data; void __init create_mapping(struct map_desc *md); -void __init bootmem_init(struct meminfo *mi); +void __init bootmem_init(void); void reserve_node_zero(struct pglist_data *pgdat); extern void _text, _stext, _etext, __data_start, _end, __init_begin, __init_end; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index f24803c1fb0b..c0b9a78d7b87 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -646,61 +646,79 @@ static void __init early_vmalloc(char **arg) "vmalloc area too small, limiting to %luMB\n", vmalloc_reserve >> 20); } + + if (vmalloc_reserve > VMALLOC_END - (PAGE_OFFSET + SZ_32M)) { + vmalloc_reserve = VMALLOC_END - (PAGE_OFFSET + SZ_32M); + printk(KERN_WARNING + "vmalloc area is too big, limiting to %luMB\n", + vmalloc_reserve >> 20); + } } __early_param("vmalloc=", early_vmalloc); #define VMALLOC_MIN (void *)(VMALLOC_END - vmalloc_reserve) -static int __init check_membank_valid(struct membank *mb) -{ - /* - * Check whether this memory region has non-zero size or - * invalid node number. - */ - if (mb->size == 0 || mb->node >= MAX_NUMNODES) - return 0; - - /* - * Check whether this memory region would entirely overlap - * the vmalloc area. - */ - if (phys_to_virt(mb->start) >= VMALLOC_MIN) { - printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx " - "(vmalloc region overlap).\n", - mb->start, mb->start + mb->size - 1); - return 0; - } - - /* - * Check whether this memory region would partially overlap - * the vmalloc area. - */ - if (phys_to_virt(mb->start + mb->size) < phys_to_virt(mb->start) || - phys_to_virt(mb->start + mb->size) > VMALLOC_MIN) { - unsigned long newsize = VMALLOC_MIN - phys_to_virt(mb->start); - - printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx " - "to -%.8lx (vmalloc region overlap).\n", - mb->start, mb->start + mb->size - 1, - mb->start + newsize - 1); - mb->size = newsize; - } - - return 1; -} - -static void __init sanity_check_meminfo(struct meminfo *mi) +static void __init sanity_check_meminfo(void) { int i, j; - for (i = 0, j = 0; i < mi->nr_banks; i++) { - if (check_membank_valid(&mi->bank[i])) - mi->bank[j++] = mi->bank[i]; + for (i = 0, j = 0; i < meminfo.nr_banks; i++) { + struct membank *bank = &meminfo.bank[j]; + *bank = meminfo.bank[i]; + +#ifdef CONFIG_HIGHMEM + /* + * Split those memory banks which are partially overlapping + * the vmalloc area greatly simplifying things later. + */ + if (__va(bank->start) < VMALLOC_MIN && + bank->size > VMALLOC_MIN - __va(bank->start)) { + if (meminfo.nr_banks >= NR_BANKS) { + printk(KERN_CRIT "NR_BANKS too low, " + "ignoring high memory\n"); + } else { + memmove(bank + 1, bank, + (meminfo.nr_banks - i) * sizeof(*bank)); + meminfo.nr_banks++; + i++; + bank[1].size -= VMALLOC_MIN - __va(bank->start); + bank[1].start = __pa(VMALLOC_MIN - 1) + 1; + j++; + } + bank->size = VMALLOC_MIN - __va(bank->start); + } +#else + /* + * Check whether this memory bank would entirely overlap + * the vmalloc area. + */ + if (__va(bank->start) >= VMALLOC_MIN) { + printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx " + "(vmalloc region overlap).\n", + bank->start, bank->start + bank->size - 1); + continue; + } + + /* + * Check whether this memory bank would partially overlap + * the vmalloc area. + */ + if (__va(bank->start + bank->size) > VMALLOC_MIN || + __va(bank->start + bank->size) < __va(bank->start)) { + unsigned long newsize = VMALLOC_MIN - __va(bank->start); + printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx " + "to -%.8lx (vmalloc region overlap).\n", + bank->start, bank->start + bank->size - 1, + bank->start + newsize - 1); + bank->size = newsize; + } +#endif + j++; } - mi->nr_banks = j; + meminfo.nr_banks = j; } -static inline void prepare_page_table(struct meminfo *mi) +static inline void prepare_page_table(void) { unsigned long addr; @@ -721,7 +739,7 @@ static inline void prepare_page_table(struct meminfo *mi) * Clear out all the kernel space mappings, except for the first * memory bank, up to the end of the vmalloc region. */ - for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size); + for (addr = __phys_to_virt(bank_phys_end(&meminfo.bank[0])); addr < VMALLOC_END; addr += PGDIR_SIZE) pmd_clear(pmd_off_k(addr)); } @@ -880,14 +898,14 @@ static void __init devicemaps_init(struct machine_desc *mdesc) * paging_init() sets up the page tables, initialises the zone memory * maps, and sets up the zero page, bad page and bad page tables. */ -void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) +void __init paging_init(struct machine_desc *mdesc) { void *zero_page; build_mem_type_table(); - sanity_check_meminfo(mi); - prepare_page_table(mi); - bootmem_init(mi); + sanity_check_meminfo(); + prepare_page_table(); + bootmem_init(); devicemaps_init(mdesc); top_pmd = pmd_off_k(0xffff0000); diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 07b62b238979..c085f4e8248b 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -41,27 +41,13 @@ void __init reserve_node_zero(pg_data_t *pgdat) BOOTMEM_DEFAULT); } -static void __init sanity_check_meminfo(struct meminfo *mi) -{ - int i, j; - - for (i = 0, j = 0; i < mi->nr_banks; i++) { - struct membank *mb = &mi->bank[i]; - - if (mb->size != 0 && mb->node < MAX_NUMNODES) - mi->bank[j++] = mi->bank[i]; - } - mi->nr_banks = j; -} - /* * paging_init() sets up the page tables, initialises the zone memory * maps, and sets up the zero page, bad page and bad page tables. */ -void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) +void __init paging_init(struct machine_desc *mdesc) { - sanity_check_meminfo(mi); - bootmem_init(mi); + bootmem_init(); } /* diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c index 2b5ba396e3a6..4ad3bf291ad3 100644 --- a/arch/arm/mm/proc-syms.c +++ b/arch/arm/mm/proc-syms.c @@ -33,8 +33,8 @@ EXPORT_SYMBOL(cpu_cache); #ifdef CONFIG_MMU #ifndef MULTI_USER -EXPORT_SYMBOL(__cpu_clear_user_page); -EXPORT_SYMBOL(__cpu_copy_user_page); +EXPORT_SYMBOL(__cpu_clear_user_highpage); +EXPORT_SYMBOL(__cpu_copy_user_highpage); #else EXPORT_SYMBOL(cpu_user); #endif diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index d7a8d3ebed57..203688e6164e 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -13,17 +13,4 @@ #include -/* - * Virtual view <-> DMA view memory address translations - * This macro is used to translate the virtual address to an address - * suitable to be passed to set_dma_addr() - */ -#define __virt_to_bus(a) __virt_to_phys(a) - -/* - * Used to convert an address for DMA operations to an address that the - * kernel can use. - */ -#define __bus_to_virt(a) __phys_to_virt(a) - #endif /* __ASM_ARCH_MXC_MEMORY_H__ */ diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 8679fbca6bbe..424049d83fbe 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -101,6 +101,7 @@ #define OMAP24XX_GPIO_IRQSTATUS2 0x0028 #define OMAP24XX_GPIO_IRQENABLE2 0x002c #define OMAP24XX_GPIO_IRQENABLE1 0x001c +#define OMAP24XX_GPIO_WAKE_EN 0x0020 #define OMAP24XX_GPIO_CTRL 0x0030 #define OMAP24XX_GPIO_OE 0x0034 #define OMAP24XX_GPIO_DATAIN 0x0038 @@ -1551,7 +1552,7 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: - wake_status = bank->base + OMAP24XX_GPIO_SETWKUENA; + wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN; wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; break; @@ -1574,7 +1575,7 @@ static int omap_gpio_resume(struct sys_device *dev) { int i; - if (!cpu_is_omap24xx() && !cpu_is_omap16xx()) + if (!cpu_class_is_omap2() && !cpu_is_omap16xx()) return 0; for (i = 0; i < gpio_bank_count; i++) { diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h index d40cac60b959..211c9f6619e9 100644 --- a/arch/arm/plat-omap/include/mach/memory.h +++ b/arch/arm/plat-omap/include/mach/memory.h @@ -42,19 +42,8 @@ #define PHYS_OFFSET UL(0x80000000) #endif -/* - * Conversion between SDRAM and fake PCI bus, used by USB - * NOTE: Physical address must be converted to Local Bus address - * on OMAP-1510 only - */ - /* * Bus address is physical address, except for OMAP-1510 Local Bus. - */ -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) - -/* * OMAP-1510 bus address is translated into a Local Bus address if the * OMAP bus type is lbus. We do the address translation based on the * device overriding the defaults used in the dma-mapping API. @@ -74,16 +63,16 @@ #define __arch_page_to_dma(dev, page) ({is_lbus_device(dev) ? \ (dma_addr_t)virt_to_lbus(page_address(page)) : \ - (dma_addr_t)__virt_to_bus(page_address(page));}) + (dma_addr_t)__virt_to_phys(page_address(page));}) #define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \ lbus_to_virt(addr) : \ - __bus_to_virt(addr)); }) + __phys_to_virt(addr)); }) #define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \ (dma_addr_t) (is_lbus_device(dev) ? \ virt_to_lbus(__addr) : \ - __virt_to_bus(__addr)); }) + __virt_to_phys(__addr)); }) #endif /* CONFIG_ARCH_OMAP15XX */ diff --git a/arch/arm/plat-omap/include/mach/pm.h b/arch/arm/plat-omap/include/mach/pm.h index 768eb6e7abcf..2a9c27ad4c37 100644 --- a/arch/arm/plat-omap/include/mach/pm.h +++ b/arch/arm/plat-omap/include/mach/pm.h @@ -128,7 +128,7 @@ void clk_deny_idle(struct clk *clk); * clk_allow_idle - Counters previous clk_deny_idle * @clk: clock signal handle */ -void clk_deny_idle(struct clk *clk); +void clk_allow_idle(struct clk *clk); extern void omap_pm_idle(void); extern void omap_pm_suspend(void); diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index a4790f3c7cd3..8c5026be79d4 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -141,7 +141,11 @@ static int is_vbus_present(void) if (mach->gpio_vbus) { int value = gpio_get_value(mach->gpio_vbus); - return mach->gpio_vbus_inverted ? !value : value; + + if (mach->gpio_vbus_inverted) + return !value; + else + return !!value; } if (mach->udc_is_connected) return mach->udc_is_connected(); @@ -982,7 +986,7 @@ static int pxa25x_udc_vbus_session(struct usb_gadget *_gadget, int is_active) struct pxa25x_udc *udc; udc = container_of(_gadget, struct pxa25x_udc, gadget); - udc->vbus = (is_active != 0); + udc->vbus = is_active; DMSG("vbus %s\n", is_active ? "supplied" : "inactive"); pullup(udc); return 0; @@ -1399,12 +1403,8 @@ lubbock_vbus_irq(int irq, void *_dev) static irqreturn_t udc_vbus_irq(int irq, void *_dev) { struct pxa25x_udc *dev = _dev; - int vbus = gpio_get_value(dev->mach->gpio_vbus); - if (dev->mach->gpio_vbus_inverted) - vbus = !vbus; - - pxa25x_udc_vbus_session(&dev->gadget, vbus); + pxa25x_udc_vbus_session(&dev->gadget, is_vbus_present()); return IRQ_HANDLED; } diff --git a/drivers/video/omap/Makefile b/drivers/video/omap/Makefile index 99da8b6d2c36..ed13889c1162 100644 --- a/drivers/video/omap/Makefile +++ b/drivers/video/omap/Makefile @@ -23,7 +23,6 @@ objs-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o -objs-y$(CONFIG_MACH_SX1) += lcd_sx1.o omapfb-objs := $(objs-yy) diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c deleted file mode 100644 index e55de201b8ff..000000000000 --- a/drivers/video/omap/lcd_sx1.c +++ /dev/null @@ -1,327 +0,0 @@ -/* - * LCD panel support for the Siemens SX1 mobile phone - * - * Current version : Vovan888@gmail.com, great help from FCA00000 - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include -#include -#include -#include - -#include -#include -#include -#include - -/* - * OMAP310 GPIO registers - */ -#define GPIO_DATA_INPUT 0xfffce000 -#define GPIO_DATA_OUTPUT 0xfffce004 -#define GPIO_DIR_CONTROL 0xfffce008 -#define GPIO_INT_CONTROL 0xfffce00c -#define GPIO_INT_MASK 0xfffce010 -#define GPIO_INT_STATUS 0xfffce014 -#define GPIO_PIN_CONTROL 0xfffce018 - - -#define A_LCD_SSC_RD 3 -#define A_LCD_SSC_SD 7 -#define _A_LCD_RESET 9 -#define _A_LCD_SSC_CS 12 -#define _A_LCD_SSC_A0 13 - -#define DSP_REG 0xE1017024 - -const unsigned char INIT_1[12] = { - 0x1C, 0x02, 0x88, 0x00, 0x1E, 0xE0, 0x00, 0xDC, 0x00, 0x02, 0x00 -}; - -const unsigned char INIT_2[127] = { - 0x15, 0x00, 0x29, 0x00, 0x3E, 0x00, 0x51, 0x00, - 0x65, 0x00, 0x7A, 0x00, 0x8D, 0x00, 0xA1, 0x00, - 0xB6, 0x00, 0xC7, 0x00, 0xD8, 0x00, 0xEB, 0x00, - 0xFB, 0x00, 0x0B, 0x01, 0x1B, 0x01, 0x27, 0x01, - 0x34, 0x01, 0x41, 0x01, 0x4C, 0x01, 0x55, 0x01, - 0x5F, 0x01, 0x68, 0x01, 0x70, 0x01, 0x78, 0x01, - 0x7E, 0x01, 0x86, 0x01, 0x8C, 0x01, 0x94, 0x01, - 0x9B, 0x01, 0xA1, 0x01, 0xA4, 0x01, 0xA9, 0x01, - 0xAD, 0x01, 0xB2, 0x01, 0xB7, 0x01, 0xBC, 0x01, - 0xC0, 0x01, 0xC4, 0x01, 0xC8, 0x01, 0xCB, 0x01, - 0xCF, 0x01, 0xD2, 0x01, 0xD5, 0x01, 0xD8, 0x01, - 0xDB, 0x01, 0xE0, 0x01, 0xE3, 0x01, 0xE6, 0x01, - 0xE8, 0x01, 0xEB, 0x01, 0xEE, 0x01, 0xF1, 0x01, - 0xF3, 0x01, 0xF8, 0x01, 0xF9, 0x01, 0xFC, 0x01, - 0x00, 0x02, 0x03, 0x02, 0x07, 0x02, 0x09, 0x02, - 0x0E, 0x02, 0x13, 0x02, 0x1C, 0x02, 0x00 -}; - -const unsigned char INIT_3[15] = { - 0x14, 0x26, 0x33, 0x3D, 0x45, 0x4D, 0x53, 0x59, - 0x5E, 0x63, 0x67, 0x6D, 0x71, 0x78, 0xFF -}; - -static void epson_sendbyte(int flag, unsigned char byte) -{ - int i, shifter = 0x80; - - if (!flag) - gpio_set_value(_A_LCD_SSC_A0, 0); - mdelay(2); - gpio_set_value(A_LCD_SSC_RD, 1); - - gpio_set_value(A_LCD_SSC_SD, flag); - - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200); - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202); - for (i = 0; i < 8; i++) { - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200); - gpio_set_value(A_LCD_SSC_SD, shifter & byte); - OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202); - shifter >>= 1; - } - gpio_set_value(_A_LCD_SSC_A0, 1); -} - -static void init_system(void) -{ - omap_mcbsp_request(OMAP_MCBSP3); - omap_mcbsp_stop(OMAP_MCBSP3); -} - -static void setup_GPIO(void) -{ - /* new wave */ - gpio_request(A_LCD_SSC_RD, "lcd_ssc_rd"); - gpio_request(A_LCD_SSC_SD, "lcd_ssc_sd"); - gpio_request(_A_LCD_RESET, "lcd_reset"); - gpio_request(_A_LCD_SSC_CS, "lcd_ssc_cs"); - gpio_request(_A_LCD_SSC_A0, "lcd_ssc_a0"); - - /* set GPIOs to output, with initial data */ - gpio_direction_output(A_LCD_SSC_RD, 1); - gpio_direction_output(A_LCD_SSC_SD, 0); - gpio_direction_output(_A_LCD_RESET, 0); - gpio_direction_output(_A_LCD_SSC_CS, 1); - gpio_direction_output(_A_LCD_SSC_A0, 1); -} - -static void display_init(void) -{ - int i; - - omap_cfg_reg(MCBSP3_CLKX); - - mdelay(2); - setup_GPIO(); - mdelay(2); - - /* reset LCD */ - gpio_set_value(A_LCD_SSC_SD, 1); - epson_sendbyte(0, 0x25); - - gpio_set_value(_A_LCD_RESET, 0); - mdelay(10); - gpio_set_value(_A_LCD_RESET, 1); - - gpio_set_value(_A_LCD_SSC_CS, 1); - mdelay(2); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD, phase 1 */ - epson_sendbyte(0, 0xCA); - for (i = 0; i < 10; i++) - epson_sendbyte(1, INIT_1[i]); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 2 */ - epson_sendbyte(0, 0xCB); - for (i = 0; i < 125; i++) - epson_sendbyte(1, INIT_2[i]); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 2a */ - epson_sendbyte(0, 0xCC); - for (i = 0; i < 14; i++) - epson_sendbyte(1, INIT_3[i]); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 3 */ - epson_sendbyte(0, 0xBC); - epson_sendbyte(1, 0x08); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 4 */ - epson_sendbyte(0, 0x07); - epson_sendbyte(1, 0x05); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 5 */ - epson_sendbyte(0, 0x94); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 6 */ - epson_sendbyte(0, 0xC6); - epson_sendbyte(1, 0x80); - gpio_set_value(_A_LCD_SSC_CS, 1); - mdelay(100); /* used to be 1000 */ - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 7 */ - epson_sendbyte(0, 0x16); - epson_sendbyte(1, 0x02); - epson_sendbyte(1, 0x00); - epson_sendbyte(1, 0xB1); - epson_sendbyte(1, 0x00); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 8 */ - epson_sendbyte(0, 0x76); - epson_sendbyte(1, 0x00); - epson_sendbyte(1, 0x00); - epson_sendbyte(1, 0xDB); - epson_sendbyte(1, 0x00); - gpio_set_value(_A_LCD_SSC_CS, 1); - gpio_set_value(_A_LCD_SSC_CS, 0); - - /* init LCD phase 9 */ - epson_sendbyte(0, 0xAF); - gpio_set_value(_A_LCD_SSC_CS, 1); -} - -static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) -{ - return 0; -} - -static void sx1_panel_cleanup(struct lcd_panel *panel) -{ -} - -static void sx1_panel_disable(struct lcd_panel *panel) -{ - printk(KERN_INFO "SX1: LCD panel disable\n"); - sx1_setmmipower(0); - gpio_set_value(_A_LCD_SSC_CS, 1); - - epson_sendbyte(0, 0x25); - gpio_set_value(_A_LCD_SSC_CS, 0); - - epson_sendbyte(0, 0xAE); - gpio_set_value(_A_LCD_SSC_CS, 1); - mdelay(100); - gpio_set_value(_A_LCD_SSC_CS, 0); - - epson_sendbyte(0, 0x95); - gpio_set_value(_A_LCD_SSC_CS, 1); -} - -static int sx1_panel_enable(struct lcd_panel *panel) -{ - printk(KERN_INFO "lcd_sx1: LCD panel enable\n"); - init_system(); - display_init(); - - sx1_setmmipower(1); - sx1_setbacklight(0x18); - sx1_setkeylight (0x06); - return 0; -} - - -static unsigned long sx1_panel_get_caps(struct lcd_panel *panel) -{ - return 0; -} - -struct lcd_panel sx1_panel = { - .name = "sx1", - .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC | - OMAP_LCDC_INV_HSYNC | OMAP_LCDC_INV_PIX_CLOCK | - OMAP_LCDC_INV_OUTPUT_EN, - - .x_res = 176, - .y_res = 220, - .data_lines = 16, - .bpp = 16, - .hsw = 5, - .hfp = 5, - .hbp = 5, - .vsw = 2, - .vfp = 1, - .vbp = 1, - .pixel_clock = 1500, - - .init = sx1_panel_init, - .cleanup = sx1_panel_cleanup, - .enable = sx1_panel_enable, - .disable = sx1_panel_disable, - .get_caps = sx1_panel_get_caps, -}; - -static int sx1_panel_probe(struct platform_device *pdev) -{ - omapfb_register_panel(&sx1_panel); - return 0; -} - -static int sx1_panel_remove(struct platform_device *pdev) -{ - return 0; -} - -static int sx1_panel_suspend(struct platform_device *pdev, pm_message_t mesg) -{ - return 0; -} - -static int sx1_panel_resume(struct platform_device *pdev) -{ - return 0; -} - -struct platform_driver sx1_panel_driver = { - .probe = sx1_panel_probe, - .remove = sx1_panel_remove, - .suspend = sx1_panel_suspend, - .resume = sx1_panel_resume, - .driver = { - .name = "lcd_sx1", - .owner = THIS_MODULE, - }, -}; - -static int sx1_panel_drv_init(void) -{ - return platform_driver_register(&sx1_panel_driver); -} - -static void sx1_panel_drv_cleanup(void) -{ - platform_driver_unregister(&sx1_panel_driver); -} - -module_init(sx1_panel_drv_init); -module_exit(sx1_panel_drv_cleanup); diff --git a/include/linux/highmem.h b/include/linux/highmem.h index 7dcbc82f3b7b..13875ce9112a 100644 --- a/include/linux/highmem.h +++ b/include/linux/highmem.h @@ -63,12 +63,14 @@ static inline void *kmap_atomic(struct page *page, enum km_type idx) #endif /* CONFIG_HIGHMEM */ /* when CONFIG_HIGHMEM is not set these will be plain clear/copy_page */ +#ifndef clear_user_highpage static inline void clear_user_highpage(struct page *page, unsigned long vaddr) { void *addr = kmap_atomic(page, KM_USER0); clear_user_page(addr, vaddr, page); kunmap_atomic(addr, KM_USER0); } +#endif #ifndef __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE /**