redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity

ASoC: sgtl5000: Cleanup the comments

Browse source 
Fix grammar and typos.

Besides that, also fix the comment about the range of SYS_MCLK, which is from
8 to 27 MHz.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Fabio Estevam 2014-10-07 10:50:56 -03:00 committed by Mark Brown
parent f114040e3e
commit 7f6d75d776
1 changed files with 14 additions and 13 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

27
sound/soc/codecs/sgtl5000.c
View file

@ -530,16 +530,16 @@ static int sgtl5000_set_dai_sysclk(struct snd_soc_dai *codec_dai,
/*
* set clock according to i2s frame clock,
* sgtl5000 provide 2 clock sources.
* 1. sys_mclk. sample freq can only configure to
* sgtl5000 provides 2 clock sources:
* 1. sys_mclk: sample freq can only be configured to
* 1/256, 1/384, 1/512 of sys_mclk.
* 2. pll. can derive any audio clocks.
* 2. pll: can derive any audio clocks.
*
* clock setting rules:
* 1. in slave mode, only sys_mclk can use.
* 2. as constraint by sys_mclk, sample freq should
* set to 32k, 44.1k and above.
* 3. using sys_mclk prefer to pll to save power.
* 1. in slave mode, only sys_mclk can be used
* 2. as constraint by sys_mclk, sample freq should be set to 32 kHz, 44.1 kHz
* and above.
* 3. usage of sys_mclk is preferred over pll to save power.
*/
static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate)
{
@ -549,8 +549,8 @@ static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate)
/*
* sample freq should be divided by frame clock,
* if frame clock lower than 44.1khz, sample feq should set to
* 32khz or 44.1khz.
* if frame clock is lower than 44.1 kHz, sample freq should be set to
* 32 kHz or 44.1 kHz.
*/
switch (frame_rate) {
case 8000:
@ -603,7 +603,8 @@ static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate)
/*
* calculate the divider of mclk/sample_freq,
* factor of freq =96k can only be 256, since mclk in range (12m,27m)
* factor of freq = 96 kHz can only be 256, since mclk is in the range
* of 8 MHz - 27 MHz
*/
switch (sgtl5000->sysclk / sys_fs) {
case 256:
@ -619,7 +620,7 @@ static int sgtl5000_set_clock(struct snd_soc_codec *codec, int frame_rate)
SGTL5000_MCLK_FREQ_SHIFT;
break;
default:
/* if mclk not satisify the divider, use pll */
/* if mclk does not satisfy the divider, use pll */
if (sgtl5000->master) {
clk_ctl |= SGTL5000_MCLK_FREQ_PLL <<
SGTL5000_MCLK_FREQ_SHIFT;
@ -795,7 +796,7 @@ static int ldo_regulator_enable(struct regulator_dev *dev)
SGTL5000_LINEREG_D_POWERUP,
SGTL5000_LINEREG_D_POWERUP);
/* when internal ldo enabled, simple digital power can be disabled */
/* when internal ldo is enabled, simple digital power can be disabled */
snd_soc_update_bits(codec, SGTL5000_CHIP_ANA_POWER,
SGTL5000_LINREG_SIMPLE_POWERUP,
0);
@ -1079,7 +1080,7 @@ static bool sgtl5000_readable(struct device *dev, unsigned int reg)
/*
* sgtl5000 has 3 internal power supplies:
* 1. VAG, normally set to vdda/2
* 2. chargepump, set to different value
* 2. charge pump, set to different value
* according to voltage of vdda and vddio
* 3. line out VAG, normally set to vddio/2
*