V4L/DVB (8421): Adds support for Dvbworld DVB-S 2102 USB card
Signed-off-by: Igor M Liplianin <liplianin@me.by> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>hifive-unleashed-5.1
Igor M Liplianin
Mauro Carvalho Chehab
parent
e272ae088f
commit
7fd4828f6c
|
|
@ -246,6 +246,14 @@ config DVB_USB_AF9005_REMOTE
|
|||
Say Y here to support the default remote control decoding for the
|
||||
Afatech AF9005 based receiver.
|
||||
|
||||
config DVB_USB_DW2102
|
||||
tristate "DvbWorld 2102 DVB-S USB2.0 receiver"
|
||||
depends on DVB_USB
|
||||
select DVB_STV0299 if !DVB_FE_CUSTOMISE
|
||||
select DVB_PLL if !DVB_FE_CUSTOMISE
|
||||
help
|
||||
Say Y here to support the DvbWorld 2102 DVB-S USB2.0 receiver.
|
||||
|
||||
config DVB_USB_ANYSEE
|
||||
tristate "Anysee DVB-T/C USB2.0 support"
|
||||
depends on DVB_USB
|
||||
|
|
|
|||
|
|
@ -64,6 +64,9 @@ obj-$(CONFIG_DVB_USB_AF9005_REMOTE) += dvb-usb-af9005-remote.o
|
|||
dvb-usb-anysee-objs = anysee.o
|
||||
obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o
|
||||
|
||||
dvb-usb-dw2102-objs = dw2102.o
|
||||
obj-$(CONFIG_DVB_USB_DW2102) += dvb-usb-dw2102.o
|
||||
|
||||
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
|
||||
# due to tuner-xc3028
|
||||
EXTRA_CFLAGS += -Idrivers/media/common/tuners
|
||||
|
|
|
|||
|
|
@ -204,5 +204,6 @@
|
|||
#define USB_PID_ASUS_U3000 0x171f
|
||||
#define USB_PID_ASUS_U3100 0x173f
|
||||
#define USB_PID_YUAN_EC372S 0x1edc
|
||||
#define USB_PID_DW2102 0x2102
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -0,0 +1,425 @@
|
|||
/* DVB USB framework compliant Linux driver for the DVBWorld DVB-S 2102 Card
|
||||
*
|
||||
* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation, version 2.
|
||||
*
|
||||
* see Documentation/dvb/README.dvb-usb for more information
|
||||
*/
|
||||
#include <linux/version.h>
|
||||
#include "dw2102.h"
|
||||
#include "stv0299.h"
|
||||
#include "z0194a.h"
|
||||
|
||||
#ifndef USB_PID_DW2102
|
||||
#define USB_PID_DW2102 0x2102
|
||||
#endif
|
||||
|
||||
#define DW2102_READ_MSG 0
|
||||
#define DW2102_WRITE_MSG 1
|
||||
|
||||
#define REG_1F_SYMBOLRATE_BYTE0 0x1f
|
||||
#define REG_20_SYMBOLRATE_BYTE1 0x20
|
||||
#define REG_21_SYMBOLRATE_BYTE2 0x21
|
||||
|
||||
#define DW2102_VOLTAGE_CTRL (0x1800)
|
||||
#define DW2102_RC_QUERY (0x1a00)
|
||||
|
||||
struct dw2102_state {
|
||||
u32 last_key_pressed;
|
||||
};
|
||||
struct dw2102_rc_keys {
|
||||
u32 keycode;
|
||||
u32 event;
|
||||
};
|
||||
|
||||
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
|
||||
|
||||
static int dw2102_op_rw(struct usb_device *dev, u8 request, u16 value,
|
||||
u8 *data, u16 len, int flags)
|
||||
{
|
||||
int ret;
|
||||
u8 u8buf[len];
|
||||
|
||||
unsigned int pipe = (flags == DW2102_READ_MSG) ?
|
||||
usb_rcvctrlpipe(dev, 0) : usb_sndctrlpipe(dev, 0);
|
||||
u8 request_type = (flags == DW2102_READ_MSG) ? USB_DIR_IN : USB_DIR_OUT;
|
||||
|
||||
if (flags == DW2102_WRITE_MSG)
|
||||
memcpy(u8buf, data, len);
|
||||
ret = usb_control_msg(dev, pipe, request,
|
||||
request_type | USB_TYPE_VENDOR, value, 0 , u8buf, len, 2000);
|
||||
|
||||
if (flags == DW2102_READ_MSG)
|
||||
memcpy(data, u8buf, len);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* I2C */
|
||||
|
||||
static int dw2102_i2c_transfer(struct i2c_adapter *adap, struct i2c_msg msg[],
|
||||
int num)
|
||||
{
|
||||
struct dvb_usb_device *d = i2c_get_adapdata(adap);
|
||||
int i = 0, ret = 0;
|
||||
u8 buf6[] = {0x2c, 0x05, 0xc0, 0, 0, 0, 0};
|
||||
u8 request;
|
||||
u16 value;
|
||||
|
||||
if (!d)
|
||||
return -ENODEV;
|
||||
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
|
||||
return -EAGAIN;
|
||||
|
||||
switch (num) {
|
||||
case 2:
|
||||
/* read stv0299 register */
|
||||
request = 0xb5;
|
||||
value = msg[0].buf[0];/* register */
|
||||
for (i = 0; i < msg[1].len; i++) {
|
||||
value = value + i;
|
||||
ret = dw2102_op_rw(d->udev, 0xb5,
|
||||
value, buf6, 2, DW2102_READ_MSG);
|
||||
msg[1].buf[i] = buf6[0];
|
||||
|
||||
}
|
||||
break;
|
||||
case 1:
|
||||
switch (msg[0].addr) {
|
||||
case 0x68:
|
||||
/* write to stv0299 register */
|
||||
buf6[0] = 0x2a;
|
||||
buf6[1] = msg[0].buf[0];
|
||||
buf6[2] = msg[0].buf[1];
|
||||
ret = dw2102_op_rw(d->udev, 0xb2,
|
||||
0, buf6, 3, DW2102_WRITE_MSG);
|
||||
break;
|
||||
case 0x60:
|
||||
if (msg[0].flags == 0) {
|
||||
/* write to tuner pll */
|
||||
buf6[0] = 0x2c;
|
||||
buf6[1] = 5;
|
||||
buf6[2] = 0xc0;
|
||||
buf6[3] = msg[0].buf[0];
|
||||
buf6[4] = msg[0].buf[1];
|
||||
buf6[5] = msg[0].buf[2];
|
||||
buf6[6] = msg[0].buf[3];
|
||||
ret = dw2102_op_rw(d->udev, 0xb2,
|
||||
0, buf6, 7, DW2102_WRITE_MSG);
|
||||
} else {
|
||||
/* write to tuner pll */
|
||||
ret = dw2102_op_rw(d->udev, 0xb5,
|
||||
0, buf6, 1, DW2102_READ_MSG);
|
||||
msg[0].buf[0] = buf6[0];
|
||||
}
|
||||
break;
|
||||
case (DW2102_RC_QUERY):
|
||||
ret = dw2102_op_rw(d->udev, 0xb8,
|
||||
0, buf6, 2, DW2102_READ_MSG);
|
||||
msg[0].buf[0] = buf6[0];
|
||||
msg[0].buf[1] = buf6[1];
|
||||
break;
|
||||
case (DW2102_VOLTAGE_CTRL):
|
||||
buf6[0] = 0x30;
|
||||
buf6[1] = msg[0].buf[0];
|
||||
ret = dw2102_op_rw(d->udev, 0xb2,
|
||||
0, buf6, 2, DW2102_WRITE_MSG);
|
||||
break;
|
||||
}
|
||||
|
||||
break;
|
||||
}
|
||||
|
||||
mutex_unlock(&d->i2c_mutex);
|
||||
return num;
|
||||
}
|
||||
|
||||
static u32 dw2102_i2c_func(struct i2c_adapter *adapter)
|
||||
{
|
||||
return I2C_FUNC_I2C;
|
||||
}
|
||||
|
||||
static struct i2c_algorithm dw2102_i2c_algo = {
|
||||
.master_xfer = dw2102_i2c_transfer,
|
||||
.functionality = dw2102_i2c_func,
|
||||
};
|
||||
|
||||
static int dw2102_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
|
||||
{
|
||||
static u8 command_13v[1] = {0x00};
|
||||
static u8 command_18v[1] = {0x01};
|
||||
struct i2c_msg msg[] = {
|
||||
{.addr = DW2102_VOLTAGE_CTRL, .flags = 0,
|
||||
.buf = command_13v, .len = 1},
|
||||
};
|
||||
|
||||
struct dvb_usb_adapter *udev_adap =
|
||||
(struct dvb_usb_adapter *)(fe->dvb->priv);
|
||||
if (voltage == SEC_VOLTAGE_18)
|
||||
msg[0].buf = command_18v;
|
||||
i2c_transfer(&udev_adap->dev->i2c_adap, msg, 1);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int dw2102_frontend_attach(struct dvb_usb_adapter *d)
|
||||
{
|
||||
d->fe = dvb_attach(stv0299_attach, &sharp_z0194a_config,
|
||||
&d->dev->i2c_adap);
|
||||
if (d->fe != NULL) {
|
||||
d->fe->ops.set_voltage = dw2102_set_voltage;
|
||||
info("Attached stv0299!\n");
|
||||
return 0;
|
||||
}
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
static int dw2102_tuner_attach(struct dvb_usb_adapter *adap)
|
||||
{
|
||||
dvb_attach(dvb_pll_attach, adap->fe, 0x60,
|
||||
&adap->dev->i2c_adap, DVB_PLL_OPERA1);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct dvb_usb_rc_key dw2102_rc_keys[] = {
|
||||
{ 0xf8, 0x0a, KEY_Q }, /*power*/
|
||||
{ 0xf8, 0x0c, KEY_M }, /*mute*/
|
||||
{ 0xf8, 0x11, KEY_1 },
|
||||
{ 0xf8, 0x12, KEY_2 },
|
||||
{ 0xf8, 0x13, KEY_3 },
|
||||
{ 0xf8, 0x14, KEY_4 },
|
||||
{ 0xf8, 0x15, KEY_5 },
|
||||
{ 0xf8, 0x16, KEY_6 },
|
||||
{ 0xf8, 0x17, KEY_7 },
|
||||
{ 0xf8, 0x18, KEY_8 },
|
||||
{ 0xf8, 0x19, KEY_9 },
|
||||
{ 0xf8, 0x10, KEY_0 },
|
||||
{ 0xf8, 0x1c, KEY_PAGEUP }, /*ch+*/
|
||||
{ 0xf8, 0x0f, KEY_PAGEDOWN }, /*ch-*/
|
||||
{ 0xf8, 0x1a, KEY_O }, /*vol+*/
|
||||
{ 0xf8, 0x0e, KEY_Z }, /*vol-*/
|
||||
{ 0xf8, 0x04, KEY_R }, /*rec*/
|
||||
{ 0xf8, 0x09, KEY_D }, /*fav*/
|
||||
{ 0xf8, 0x08, KEY_BACKSPACE }, /*rewind*/
|
||||
{ 0xf8, 0x07, KEY_A }, /*fast*/
|
||||
{ 0xf8, 0x0b, KEY_P }, /*pause*/
|
||||
{ 0xf8, 0x02, KEY_ESC }, /*cancel*/
|
||||
{ 0xf8, 0x03, KEY_G }, /*tab*/
|
||||
{ 0xf8, 0x00, KEY_UP }, /*up*/
|
||||
{ 0xf8, 0x1f, KEY_ENTER }, /*ok*/
|
||||
{ 0xf8, 0x01, KEY_DOWN }, /*down*/
|
||||
{ 0xf8, 0x05, KEY_C }, /*cap*/
|
||||
{ 0xf8, 0x06, KEY_S }, /*stop*/
|
||||
{ 0xf8, 0x40, KEY_F }, /*full*/
|
||||
{ 0xf8, 0x1e, KEY_W }, /*tvmode*/
|
||||
{ 0xf8, 0x1b, KEY_B }, /*recall*/
|
||||
|
||||
};
|
||||
|
||||
|
||||
|
||||
static int dw2102_rc_query(struct dvb_usb_device *d, u32 *event, int *state)
|
||||
{
|
||||
struct dw2102_state *st = d->priv;
|
||||
u8 key[2];
|
||||
struct i2c_msg msg[] = {
|
||||
{.addr = DW2102_RC_QUERY, .flags = I2C_M_RD, .buf = key,
|
||||
.len = 2},
|
||||
};
|
||||
int i;
|
||||
|
||||
*state = REMOTE_NO_KEY_PRESSED;
|
||||
if (dw2102_i2c_transfer(&d->i2c_adap, msg, 1) == 1) {
|
||||
for (i = 0; i < ARRAY_SIZE(dw2102_rc_keys); i++) {
|
||||
if (dw2102_rc_keys[i].data == msg[0].buf[0]) {
|
||||
*state = REMOTE_KEY_PRESSED;
|
||||
*event = dw2102_rc_keys[i].event;
|
||||
st->last_key_pressed =
|
||||
dw2102_rc_keys[i].event;
|
||||
break;
|
||||
}
|
||||
st->last_key_pressed = 0;
|
||||
}
|
||||
}
|
||||
/* info("key: %x %x\n",key[0],key[1]); */
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct usb_device_id dw2102_table[] = {
|
||||
{USB_DEVICE(USB_VID_CYPRESS, USB_PID_DW2102)},
|
||||
{USB_DEVICE(USB_VID_CYPRESS, 0x2101)},
|
||||
{ }
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(usb, dw2102_table);
|
||||
|
||||
static int dw2102_load_firmware(struct usb_device *dev,
|
||||
const struct firmware *frmwr)
|
||||
{
|
||||
u8 *b, *p;
|
||||
int ret = 0, i;
|
||||
u8 reset;
|
||||
u8 reset16 [] = {0, 0, 0, 0, 0, 0, 0};
|
||||
const struct firmware *fw;
|
||||
const char *filename = "dvb-usb-dw2101.fw";
|
||||
switch (dev->descriptor.idProduct) {
|
||||
case 0x2101:
|
||||
ret = request_firmware(&fw, filename, &dev->dev);
|
||||
if (ret != 0) {
|
||||
err("did not find the firmware file. (%s) "
|
||||
"Please see linux/Documentation/dvb/ for more details "
|
||||
"on firmware-problems.", filename);
|
||||
return ret;
|
||||
}
|
||||
break;
|
||||
case USB_PID_DW2102:
|
||||
fw = frmwr;
|
||||
break;
|
||||
}
|
||||
info("start downloading DW2102 firmware");
|
||||
p = kmalloc(fw->size, GFP_KERNEL);
|
||||
reset = 1;
|
||||
/*stop the CPU*/
|
||||
dw2102_op_rw(dev, 0xa0, 0x7f92, &reset, 1, DW2102_WRITE_MSG);
|
||||
dw2102_op_rw(dev, 0xa0, 0xe600, &reset, 1, DW2102_WRITE_MSG);
|
||||
|
||||
if (p != NULL) {
|
||||
memcpy(p, fw->data, fw->size);
|
||||
for (i = 0; i < fw->size; i += 0x40) {
|
||||
b = (u8 *) p + i;
|
||||
if (dw2102_op_rw
|
||||
(dev, 0xa0, i, b , 0x40,
|
||||
DW2102_WRITE_MSG) != 0x40
|
||||
) {
|
||||
err("error while transferring firmware");
|
||||
ret = -EINVAL;
|
||||
break;
|
||||
}
|
||||
}
|
||||
/* restart the CPU */
|
||||
reset = 0;
|
||||
if (ret || dw2102_op_rw
|
||||
(dev, 0xa0, 0x7f92, &reset, 1,
|
||||
DW2102_WRITE_MSG) != 1) {
|
||||
err("could not restart the USB controller CPU.");
|
||||
ret = -EINVAL;
|
||||
}
|
||||
if (ret || dw2102_op_rw
|
||||
(dev, 0xa0, 0xe600, &reset, 1,
|
||||
DW2102_WRITE_MSG) != 1) {
|
||||
err("could not restart the USB controller CPU.");
|
||||
ret = -EINVAL;
|
||||
}
|
||||
/* init registers */
|
||||
switch (dev->descriptor.idProduct) {
|
||||
case USB_PID_DW2102:
|
||||
dw2102_op_rw
|
||||
(dev, 0xbf, 0x0040, &reset, 0,
|
||||
DW2102_WRITE_MSG);
|
||||
dw2102_op_rw
|
||||
(dev, 0xb9, 0x0000, &reset16[0], 2,
|
||||
DW2102_READ_MSG);
|
||||
break;
|
||||
case 0x2101:
|
||||
dw2102_op_rw
|
||||
(dev, 0xbc, 0x0030, &reset16[0], 2,
|
||||
DW2102_READ_MSG);
|
||||
dw2102_op_rw
|
||||
(dev, 0xba, 0x0000, &reset16[0], 7,
|
||||
DW2102_READ_MSG);
|
||||
dw2102_op_rw
|
||||
(dev, 0xba, 0x0000, &reset16[0], 7,
|
||||
DW2102_READ_MSG);
|
||||
dw2102_op_rw
|
||||
(dev, 0xb9, 0x0000, &reset16[0], 2,
|
||||
DW2102_READ_MSG);
|
||||
break;
|
||||
}
|
||||
kfree(p);
|
||||
}
|
||||
return ret;
|
||||
}
|
||||
|
||||
static struct dvb_usb_device_properties dw2102_properties = {
|
||||
.caps = DVB_USB_IS_AN_I2C_ADAPTER,
|
||||
.usb_ctrl = DEVICE_SPECIFIC,
|
||||
.firmware = "dvb-usb-dw2102.fw",
|
||||
.size_of_priv = sizeof(struct dw2102_state),
|
||||
.no_reconnect = 1,
|
||||
|
||||
.i2c_algo = &dw2102_i2c_algo,
|
||||
.rc_key_map = dw2102_rc_keys,
|
||||
.rc_key_map_size = ARRAY_SIZE(dw2102_rc_keys),
|
||||
.rc_interval = 150,
|
||||
.rc_query = dw2102_rc_query,
|
||||
|
||||
.generic_bulk_ctrl_endpoint = 0x81,
|
||||
/* parameter for the MPEG2-data transfer */
|
||||
.num_adapters = 1,
|
||||
.download_firmware = dw2102_load_firmware,
|
||||
.adapter = {
|
||||
{
|
||||
.frontend_attach = dw2102_frontend_attach,
|
||||
.streaming_ctrl = NULL,
|
||||
.tuner_attach = dw2102_tuner_attach,
|
||||
.stream = {
|
||||
.type = USB_BULK,
|
||||
.count = 8,
|
||||
.endpoint = 0x82,
|
||||
.u = {
|
||||
.bulk = {
|
||||
.buffersize = 4096,
|
||||
}
|
||||
}
|
||||
},
|
||||
}
|
||||
},
|
||||
.num_device_descs = 2,
|
||||
.devices = {
|
||||
{"DVBWorld DVB-S 2102 USB2.0",
|
||||
{&dw2102_table[0], NULL},
|
||||
{NULL},
|
||||
},
|
||||
{"DVBWorld DVB-S 2101 USB2.0",
|
||||
{&dw2102_table[1], NULL},
|
||||
{NULL},
|
||||
},
|
||||
}
|
||||
};
|
||||
|
||||
static int dw2102_probe(struct usb_interface *intf,
|
||||
const struct usb_device_id *id)
|
||||
{
|
||||
return dvb_usb_device_init(intf, &dw2102_properties,
|
||||
THIS_MODULE, NULL, adapter_nr);
|
||||
}
|
||||
|
||||
static struct usb_driver dw2102_driver = {
|
||||
.name = "dw2102",
|
||||
.probe = dw2102_probe,
|
||||
.disconnect = dvb_usb_device_exit,
|
||||
.id_table = dw2102_table,
|
||||
};
|
||||
|
||||
static int __init dw2102_module_init(void)
|
||||
{
|
||||
int ret = usb_register(&dw2102_driver);
|
||||
if (ret)
|
||||
err("usb_register failed. Error number %d", ret);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void __exit dw2102_module_exit(void)
|
||||
{
|
||||
usb_deregister(&dw2102_driver);
|
||||
}
|
||||
|
||||
module_init(dw2102_module_init);
|
||||
module_exit(dw2102_module_exit);
|
||||
|
||||
MODULE_AUTHOR("Igor M. Liplianin (c) liplianin@me.by");
|
||||
MODULE_DESCRIPTION("Driver for DVBWorld DVB-S 2101 2102 USB2.0 device");
|
||||
MODULE_VERSION("0.1");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
#ifndef _DW2102_H_
|
||||
#define _DW2102_H_
|
||||
|
||||
#define DVB_USB_LOG_PREFIX "dw2102"
|
||||
#include <dvb-usb.h>
|
||||
|
||||
extern int dvb_usb_dw2102_debug;
|
||||
#define deb_xfer(args...) dprintk(dvb_usb_dw2102_debug, 0x02, args)
|
||||
#endif
|
||||
|
|
@ -0,0 +1,97 @@
|
|||
/* z0194a.h Sharp z0194a tuner support
|
||||
*
|
||||
* Copyright (C) 2008 Igor M. Liplianin (liplianin@me.by)
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation, version 2.
|
||||
*
|
||||
* see Documentation/dvb/README.dvb-usb for more information
|
||||
*/
|
||||
|
||||
#ifndef Z0194A
|
||||
#define Z0194A
|
||||
|
||||
static int sharp_z0194a__set_symbol_rate(struct dvb_frontend *fe,
|
||||
u32 srate, u32 ratio)
|
||||
{
|
||||
u8 aclk = 0;
|
||||
u8 bclk = 0;
|
||||
|
||||
if (srate < 1500000) {
|
||||
aclk = 0xb7; bclk = 0x47; }
|
||||
else if (srate < 3000000) {
|
||||
aclk = 0xb7; bclk = 0x4b; }
|
||||
else if (srate < 7000000) {
|
||||
aclk = 0xb7; bclk = 0x4f; }
|
||||
else if (srate < 14000000) {
|
||||
aclk = 0xb7; bclk = 0x53; }
|
||||
else if (srate < 30000000) {
|
||||
aclk = 0xb6; bclk = 0x53; }
|
||||
else if (srate < 45000000) {
|
||||
aclk = 0xb4; bclk = 0x51; }
|
||||
|
||||
stv0299_writereg(fe, 0x13, aclk);
|
||||
stv0299_writereg(fe, 0x14, bclk);
|
||||
stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff);
|
||||
stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff);
|
||||
stv0299_writereg(fe, 0x21, (ratio) & 0xf0);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static u8 sharp_z0194a__inittab[] = {
|
||||
0x01, 0x15,
|
||||
0x02, 0x00,
|
||||
0x03, 0x00,
|
||||
0x04, 0x7d, /* F22FR = 0x7d, F22 = f_VCO / 128 / 0x7d = 22 kHz */
|
||||
0x05, 0x35, /* I2CT = 0, SCLT = 1, SDAT = 1 */
|
||||
0x06, 0x40, /* DAC not used, set to high impendance mode */
|
||||
0x07, 0x00, /* DAC LSB */
|
||||
0x08, 0x40, /* DiSEqC off, LNB power on OP2/LOCK pin on */
|
||||
0x09, 0x00, /* FIFO */
|
||||
0x0c, 0x51, /* OP1 ctl = Normal, OP1 val = 1 (LNB Power ON) */
|
||||
0x0d, 0x82, /* DC offset compensation = ON, beta_agc1 = 2 */
|
||||
0x0e, 0x23, /* alpha_tmg = 2, beta_tmg = 3 */
|
||||
0x10, 0x3f, /* AGC2 0x3d */
|
||||
0x11, 0x84,
|
||||
0x12, 0xb9,
|
||||
0x15, 0xc9, /* lock detector threshold */
|
||||
0x16, 0x00,
|
||||
0x17, 0x00,
|
||||
0x18, 0x00,
|
||||
0x19, 0x00,
|
||||
0x1a, 0x00,
|
||||
0x1f, 0x50,
|
||||
0x20, 0x00,
|
||||
0x21, 0x00,
|
||||
0x22, 0x00,
|
||||
0x23, 0x00,
|
||||
0x28, 0x00, /* out imp: normal out type: parallel FEC mode:0 */
|
||||
0x29, 0x1e, /* 1/2 threshold */
|
||||
0x2a, 0x14, /* 2/3 threshold */
|
||||
0x2b, 0x0f, /* 3/4 threshold */
|
||||
0x2c, 0x09, /* 5/6 threshold */
|
||||
0x2d, 0x05, /* 7/8 threshold */
|
||||
0x2e, 0x01,
|
||||
0x31, 0x1f, /* test all FECs */
|
||||
0x32, 0x19, /* viterbi and synchro search */
|
||||
0x33, 0xfc, /* rs control */
|
||||
0x34, 0x93, /* error control */
|
||||
0x0f, 0x52,
|
||||
0xff, 0xff
|
||||
};
|
||||
|
||||
static struct stv0299_config sharp_z0194a_config = {
|
||||
.demod_address = 0x68,
|
||||
.inittab = sharp_z0194a__inittab,
|
||||
.mclk = 88000000UL,
|
||||
.invert = 1,
|
||||
.skip_reinit = 0,
|
||||
.lock_output = STV0229_LOCKOUTPUT_1,
|
||||
.volt13_op0_op1 = STV0299_VOLT13_OP1,
|
||||
.min_delay_ms = 100,
|
||||
.set_symbol_rate = sharp_z0194a__set_symbol_rate,
|
||||
};
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue