redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

DTS fixes for omaps for v4.7 merge window for issues noted 

with patches in Linux next:
 
 - Fix omap5 and am57xx-idk input voltages to fix micro-sd
   probing at least for some omap5-uevm configurations
 
 - Fix unhandled fault for igepv5 audio
 
 - Fix UART wakeirqs for omap5 by removing WAKUP_EN flags,
   those are managed by the wakeirq and can currently confuse
   the wakeirqs as there is no handler necessarily registered
 
 - Fix LDO7 source for igepv5
 
 Also included are few minor changes not strictly fixes
 are good to have merged:
 
 - Fix HP T410 boot time warnings for eMMC and disable the
   unused MMC interfaces while at it
 
 - Add dra7 gpmc dma channel
 
 - Add igep00x0 SD card detect and write protect GPIOs
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXNghoAAoJEBvUPslcq6Vzpj8P/jsKyMBQZZS/GXxLXouAIIx/
 S/HK3Xd1VjW8FwB1cKDL2FcY9BF1q/sbc8r0499q1fYuoZoswv3fj8mssKSOPDPQ
 1K5bjlgsw/eMaEkQh313ID7yLSK3jSBtt/USn/k+9DCg++JwnsMAi9n3GUmi1Itz
 d7p/UBnIeMY3HNWau7svLL3iphAZy8CaD2jnsB+9ZhsaRx8+Am/Uwx+Y2CcwIgP+
 lm3mzA6nnSuZkus6qW9zt5gurcA2hIyZZtdDmuEuv5D2e245z4MV/2pBbwfoAxB3
 7aRej6L+tizPh3kqbaBFfMgd9mRSn6h4CoIJova/1U64KPAnF+hoUaKw4JNX6OQt
 lnj/jqT2XwRzBejt7TVPyM9LOnF9HHP3TF0u/302tJS2OXEsfY0qt/zSAggr8pBR
 kTIQofTH3VhfZa0qP8U1F7DWmFNDNvoKTf98yojGkDLDwvOkxH+SovRHTgQgg8+E
 OVdU2PCfwzrP1/4RvvVxrgMTf5AidQCnvJbJP4Aa83WS9HEIZ3e+UXhLT+f5PFHc
 AC5b8dYdHKO5IahBZUv9lg+GMDTTiwdPY9cN5OSvpLneYu8VkIa8RwjbuuzGf0mv
 HA04E4LzIjHiHYam9NQVSlG+/hqsbgbmZOeGL7G4SxNTWQrrYeUA3ZXQwb5rlUjg
 H6qshQYccawHebu9cwzv
 =vMZg
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.7-dts-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

DTS fixes for omaps for v4.7 merge window for issues noted
with patches in Linux next:

- Fix omap5 and am57xx-idk input voltages to fix micro-sd
  probing at least for some omap5-uevm configurations

- Fix unhandled fault for igepv5 audio

- Fix UART wakeirqs for omap5 by removing WAKUP_EN flags,
  those are managed by the wakeirq and can currently confuse
  the wakeirqs as there is no handler necessarily registered

- Fix LDO7 source for igepv5

Also included are few minor changes not strictly fixes
are good to have merged:

- Fix HP T410 boot time warnings for eMMC and disable the
  unused MMC interfaces while at it

- Add dra7 gpmc dma channel

- Add igep00x0 SD card detect and write protect GPIOs

* tag 'omap-for-v4.7-dts-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: igep0020: Add SD card write-protect pin.
  ARM: dts: igep00x0: Add SD card-detect.
  ARM: dts: am57xx-idk-common: Fix input supply names
  ARM: dts: dra7: Add gpmc dma channel
  ARM: dts: disable mmc by default and enable when needed for dm814x
  ARM: dts: Add non-removable to hsmmc on hp-t410
  ARM: dts: Fix ldo7 source for HDMI on igepv5
  ARM: dts: Fix uart wakeirq on omap5 by removing WAKEUP_EN for omaps
  ARM: dts: Fix igepv5 audiopwon-gpio
  ARM: dts: omap5-board-common: Describe the voltage supply mapping accurately

Signed-off-by: Olof Johansson <olof@lixom.net>
hifive-unleashed-5.1
Olof Johansson 2016-06-03 12:28:10 -07:00
parent c2b8d9200f a1f6ad1417
commit 80084632e2
13 changed files with 139 additions and 26 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
arch/arm/boot/dts/am57xx-idk-common.dtsi
View File

@ -60,10 +60,26 @@
tps659038_pmic {
compatible = "ti,tps659038-pmic";
smps12-in-supply = <&vmain>;
smps3-in-supply = <&vmain>;
smps45-in-supply = <&vmain>;
smps6-in-supply = <&vmain>;
smps7-in-supply = <&vmain>;
smps8-in-supply = <&vmain>;
smps9-in-supply = <&vmain>;
ldo1-in-supply = <&vmain>;
ldo2-in-supply = <&vmain>;
ldo3-in-supply = <&vmain>;
ldo4-in-supply = <&vmain>;
ldo9-in-supply = <&vmain>;
ldoln-in-supply = <&vmain>;
ldousb-in-supply = <&vmain>;
ldortc-in-supply = <&vmain>;
regulators {
smps12_reg: smps12 {
/* VDD_MPU */
vin-supply = <&vmain>;
regulator-name = "smps12";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
@ -73,7 +89,6 @@
smps3_reg: smps3 {
/* VDD_DDR EMIF1 EMIF2 */
vin-supply = <&vmain>;
regulator-name = "smps3";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
@ -84,7 +99,6 @@
smps45_reg: smps45 {
/* VDD_DSPEVE on AM572 */
/* VDD_IVA + VDD_DSP on AM571 */
vin-supply = <&vmain>;
regulator-name = "smps45";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
@ -94,7 +108,6 @@
smps6_reg: smps6 {
/* VDD_GPU */
vin-supply = <&vmain>;
regulator-name = "smps6";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
@ -104,7 +117,6 @@
smps7_reg: smps7 {
/* VDD_CORE */
vin-supply = <&vmain>;
regulator-name = "smps7";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
@ -115,13 +127,11 @@
smps8_reg: smps8 {
/* 5728 - VDD_IVAHD */
/* 5718 - N.C. test point */
vin-supply = <&vmain>;
regulator-name = "smps8";
};
smps9_reg: smps9 {
/* VDD_3_3D */
vin-supply = <&vmain>;
regulator-name = "smps9";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@ -132,7 +142,6 @@
ldo1_reg: ldo1 {
/* VDDSHV8 - VSDMMC */
/* NOTE: on rev 1.3a, data supply */
vin-supply = <&vmain>;
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
@ -142,7 +151,6 @@
ldo2_reg: ldo2 {
/* VDDSH18V */
vin-supply = <&vmain>;
regulator-name = "ldo2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@ -152,7 +160,6 @@
ldo3_reg: ldo3 {
/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
vin-supply = <&vmain>;
regulator-name = "ldo3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@ -162,7 +169,6 @@
ldo4_reg: ldo4 {
/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
vin-supply = <&vmain>;
regulator-name = "ldo4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@ -174,7 +180,6 @@
ldo9_reg: ldo9 {
/* VDD_RTC */
vin-supply = <&vmain>;
regulator-name = "ldo9";
regulator-min-microvolt = <840000>;
regulator-max-microvolt = <1160000>;
@ -184,7 +189,6 @@
ldoln_reg: ldoln {
/* VDDA_1V8_PLL */
vin-supply = <&vmain>;
regulator-name = "ldoln";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@ -194,7 +198,6 @@
ldousb_reg: ldousb {
/* VDDA_3V_USB: VDDA_USBHS33 */
vin-supply = <&vmain>;
regulator-name = "ldousb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@ -204,7 +207,6 @@
ldortc_reg: ldortc {
/* VDDA_RTC */
vin-supply = <&vmain>;
regulator-name = "ldortc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;

8
arch/arm/boot/dts/dm8148-evm.dts
View File

@ -93,6 +93,10 @@
};
};
&mmc1 {
status = "disabled";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&sd1_pins>;
@ -101,6 +105,10 @@
cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
};
&mmc3 {
status = "disabled";
};
&pincntl {
sd1_pins: pinmux_sd1_pins {
pinctrl-single,pins = <

9
arch/arm/boot/dts/dm8148-t410.dts
View File

@ -45,6 +45,14 @@
phy-mode = "rgmii";
};
&mmc1 {
status = "disabled";
};
&mmc2 {
status = "disabled";
};
&mmc3 {
pinctrl-names = "default";
pinctrl-0 = <&sd2_pins>;
@ -53,6 +61,7 @@
dmas = <&edma_xbar 8 0 1 /* use SDTXEVT1 instead of MCASP0TX */
&edma_xbar 9 0 2>; /* use SDRXEVT1 instead of MCASP0RX */
dma-names = "tx", "rx";
non-removable;
};
&pincntl {

2
arch/arm/boot/dts/dra7.dtsi
View File

@ -1451,6 +1451,8 @@
ti,hwmods = "gpmc";
reg = <0x50000000 0x37c>; /* device IO registers */
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&edma_xbar 4 0>;
dma-names = "rxtx";
gpmc,num-cs = <8>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;

2
arch/arm/boot/dts/omap3-evm-37xx.dts
View File

@ -85,7 +85,7 @@
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
OMAP3_CORE1_IOPAD(0x215e, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
>;

1
arch/arm/boot/dts/omap3-igep.dtsi
View File

@ -188,6 +188,7 @@
vmmc-supply = <&vmmc1>;
vmmc_aux-supply = <&vsim>;
bus-width = <4>;
cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
};
&mmc3 {

11
arch/arm/boot/dts/omap3-igep0020-common.dtsi
View File

@ -194,6 +194,12 @@
OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
>;
};
mmc1_wp_pins: pinmux_mmc1_cd_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT | MUX_MODE4) /* etk_d15.gpio_29 */
>;
};
};
&i2c3 {
@ -250,3 +256,8 @@
};
};
};
&mmc1 {
pinctrl-0 = <&mmc1_pins &mmc1_wp_pins>;
wp-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>; /* gpio_29 */
};

4
arch/arm/boot/dts/omap3-n900.dts
View File

@ -288,7 +288,7 @@
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
@ -300,7 +300,7 @@
modem_pins: pinmux_modem {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */
OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio 72 => ape_rst_rq */
OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* gpio 72 => ape_rst_rq */
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */

6
arch/arm/boot/dts/omap3-n950-n9.dtsi
View File

@ -97,7 +97,7 @@
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
@ -110,7 +110,7 @@
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7) /* ssi1_dat_tx */
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7) /* ssi1_flag_tx */
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7) /* ssi1_rdy_tx */
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7) /* ssi1_dat_rx */
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7) /* ssi1_flag_rx */
OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* ssi1_rdy_rx */
@ -120,7 +120,7 @@
modem_pins1: pinmux_modem_core1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* gpio_34 (ape_rst_rq) */
OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4) /* gpio_34 (ape_rst_rq) */
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4) /* gpio_88 (cmt_rst_rq) */
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */
>;

6
arch/arm/boot/dts/omap3-zoom3.dts
View File

@ -98,7 +98,7 @@
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */
OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */
OMAP3_CORE1_IOPAD(0x217a, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
>;
};
@ -107,7 +107,7 @@
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x219a, PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */
OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */
OMAP3_CORE1_IOPAD(0x219e, WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
@ -125,7 +125,7 @@
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25d8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */
OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */
OMAP3630_CORE2_IOPAD(0x25e6, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */
OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */
OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */
>;

48
arch/arm/boot/dts/omap5-board-common.dtsi
View File

@ -14,6 +14,29 @@
display0 = &hdmi0;
};
vmain: fixedregulator-vmain {
compatible = "regulator-fixed";
regulator-name = "vmain";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vsys_cobra: fixedregulator-vsys_cobra {
compatible = "regulator-fixed";
regulator-name = "vsys_cobra";
vin-supply = <&vmain>;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vdds_1v8_main: fixedregulator-vdds_1v8_main {
compatible = "regulator-fixed";
regulator-name = "vdds_1v8_main";
vin-supply = <&smps7_reg>;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vmmcsd_fixed: fixedregulator-mmcsd {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
@ -309,7 +332,7 @@
wlcore_irq_pin: pinmux_wlcore_irq_pin {
pinctrl-single,pins = <
OMAP5_IOPAD(0x40, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */
OMAP5_IOPAD(0x40, PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */
>;
};
};
@ -409,6 +432,26 @@
ti,ldo6-vibrator;
smps123-in-supply = <&vsys_cobra>;
smps45-in-supply = <&vsys_cobra>;
smps6-in-supply = <&vsys_cobra>;
smps7-in-supply = <&vsys_cobra>;
smps8-in-supply = <&vsys_cobra>;
smps9-in-supply = <&vsys_cobra>;
smps10_out2-in-supply = <&vsys_cobra>;
smps10_out1-in-supply = <&vsys_cobra>;
ldo1-in-supply = <&vsys_cobra>;
ldo2-in-supply = <&vsys_cobra>;
ldo3-in-supply = <&vdds_1v8_main>;
ldo4-in-supply = <&vdds_1v8_main>;
ldo5-in-supply = <&vsys_cobra>;
ldo6-in-supply = <&vdds_1v8_main>;
ldo7-in-supply = <&vsys_cobra>;
ldo8-in-supply = <&vsys_cobra>;
ldo9-in-supply = <&vmmcsd_fixed>;
ldoln-in-supply = <&vsys_cobra>;
ldousb-in-supply = <&vsys_cobra>;
regulators {
smps123_reg: smps123 {
/* VDD_OPP_MPU */
@ -600,7 +643,8 @@
pinctrl-0 = <&twl6040_pins>;
interrupts = <GIC_SPI 119 IRQ_TYPE_NONE>; /* IRQ_SYS_2N cascaded to gic */
ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */
/* audpwron gpio defined in the board specific dts */
vio-supply = <&smps7_reg>;
v2v1-supply = <&smps9_reg>;

26
arch/arm/boot/dts/omap5-igep0050.dts
View File

@ -35,6 +35,22 @@
};
};
/* LDO4 is VPP1 - ball AD9 */
&ldo4_reg {
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
};
/*
* LDO7 is used for HDMI: VDDA_DSIPORTA - ball AA33, VDDA_DSIPORTC - ball AE33,
* VDDA_HDMI - ball AN25
*/
&ldo7_reg {
status = "okay";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
&omap5_pmx_core {
i2c4_pins: pinmux_i2c4_pins {
pinctrl-single,pins = <
@ -52,3 +68,13 @@
<&gpio7 3 0>; /* 195, SDA */
};
&twl6040 {
ti,audpwron-gpio = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio line 144 */
};
&twl6040_pins {
pinctrl-single,pins = <
OMAP5_IOPAD(0x1c4, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_144 */
OMAP5_IOPAD(0x1ca, PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */
>;
};

10
arch/arm/boot/dts/omap5-uevm.dts
View File

@ -51,3 +51,13 @@
<&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */
<&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
};
&twl6040 {
ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */
};
&twl6040_pins {
pinctrl-single,pins = <
OMAP5_IOPAD(0x1be, PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */
>;
};