diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index ace8d2678b18..b883b174385b 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -41,6 +41,20 @@ #define LE16(x) __constant_cpu_to_le16(x) #define LE32(x) __constant_cpu_to_le32(x) +/* Local defines to distinguish between extension and control CTL's */ +#define EXT_ADDITIVE (0x8000) +#define CTL_11A_EXT (CTL_11A | EXT_ADDITIVE) +#define CTL_11G_EXT (CTL_11G | EXT_ADDITIVE) +#define CTL_11B_EXT (CTL_11B | EXT_ADDITIVE) +#define REDUCE_SCALED_POWER_BY_TWO_CHAIN 6 /* 10*log10(2)*2 */ +#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 9 /* 10*log10(3)*2 */ +#define PWRINCR_3_TO_1_CHAIN 9 /* 10*log(3)*2 */ +#define PWRINCR_3_TO_2_CHAIN 3 /* floor(10*log(3/2)*2) */ +#define PWRINCR_2_TO_1_CHAIN 6 /* 10*log(2)*2 */ + +#define SUB_NUM_CTL_MODES_AT_5G_40 2 /* excluding HT40, EXT-OFDM */ +#define SUB_NUM_CTL_MODES_AT_2G_40 3 /* excluding HT40, EXT-OFDM, EXT-CCK */ + static const struct ar9300_eeprom ar9300_default = { .eepromVersion = 2, .templateVersion = 2, @@ -609,6 +623,14 @@ static const struct ar9300_eeprom ar9300_default = { } }; +static u16 ath9k_hw_fbin2freq(u8 fbin, bool is2GHz) +{ + if (fbin == AR9300_BCHAN_UNUSED) + return fbin; + + return (u16) ((is2GHz) ? (2300 + fbin) : (4800 + 5 * fbin)); +} + static int ath9k_hw_ar9300_check_eeprom(struct ath_hw *ah) { return 0; @@ -1417,9 +1439,9 @@ static int ar9003_hw_tx_power_regwrite(struct ath_hw *ah, u8 * pPwrArray) #undef POW_SM } -static void ar9003_hw_set_target_power_eeprom(struct ath_hw *ah, u16 freq) +static void ar9003_hw_set_target_power_eeprom(struct ath_hw *ah, u16 freq, + u8 *targetPowerValT2) { - u8 targetPowerValT2[ar9300RateSize]; /* XXX: hard code for now, need to get from eeprom struct */ u8 ht40PowerIncForPdadc = 0; bool is2GHz = false; @@ -1553,9 +1575,6 @@ static void ar9003_hw_set_target_power_eeprom(struct ath_hw *ah, u16 freq) "TPC[%02d] 0x%08x\n", i, targetPowerValT2[i]); i++; } - - /* Write target power array to registers */ - ar9003_hw_tx_power_regwrite(ah, targetPowerValT2); } static int ar9003_hw_cal_pier_get(struct ath_hw *ah, @@ -1799,14 +1818,369 @@ static int ar9003_hw_calibration_apply(struct ath_hw *ah, int frequency) return 0; } +static u16 ar9003_hw_get_direct_edge_power(struct ar9300_eeprom *eep, + int idx, + int edge, + bool is2GHz) +{ + struct cal_ctl_data_2g *ctl_2g = eep->ctlPowerData_2G; + struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G; + + if (is2GHz) + return ctl_2g[idx].ctlEdges[edge].tPower; + else + return ctl_5g[idx].ctlEdges[edge].tPower; +} + +static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep, + int idx, + unsigned int edge, + u16 freq, + bool is2GHz) +{ + struct cal_ctl_data_2g *ctl_2g = eep->ctlPowerData_2G; + struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G; + + u8 *ctl_freqbin = is2GHz ? + &eep->ctl_freqbin_2G[idx][0] : + &eep->ctl_freqbin_5G[idx][0]; + + if (is2GHz) { + if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 1) < freq && + ctl_2g[idx].ctlEdges[edge - 1].flag) + return ctl_2g[idx].ctlEdges[edge - 1].tPower; + } else { + if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 0) < freq && + ctl_5g[idx].ctlEdges[edge - 1].flag) + return ctl_5g[idx].ctlEdges[edge - 1].tPower; + } + + return AR9300_MAX_RATE_POWER; +} + +/* + * Find the maximum conformance test limit for the given channel and CTL info + */ +static u16 ar9003_hw_get_max_edge_power(struct ar9300_eeprom *eep, + u16 freq, int idx, bool is2GHz) +{ + u16 twiceMaxEdgePower = AR9300_MAX_RATE_POWER; + u8 *ctl_freqbin = is2GHz ? + &eep->ctl_freqbin_2G[idx][0] : + &eep->ctl_freqbin_5G[idx][0]; + u16 num_edges = is2GHz ? + AR9300_NUM_BAND_EDGES_2G : AR9300_NUM_BAND_EDGES_5G; + unsigned int edge; + + /* Get the edge power */ + for (edge = 0; + (edge < num_edges) && (ctl_freqbin[edge] != AR9300_BCHAN_UNUSED); + edge++) { + /* + * If there's an exact channel match or an inband flag set + * on the lower channel use the given rdEdgePower + */ + if (freq == ath9k_hw_fbin2freq(ctl_freqbin[edge], is2GHz)) { + twiceMaxEdgePower = + ar9003_hw_get_direct_edge_power(eep, idx, + edge, is2GHz); + break; + } else if ((edge > 0) && + (freq < ath9k_hw_fbin2freq(ctl_freqbin[edge], + is2GHz))) { + twiceMaxEdgePower = + ar9003_hw_get_indirect_edge_power(eep, idx, + edge, freq, + is2GHz); + /* + * Leave loop - no more affecting edges possible in + * this monotonic increasing list + */ + break; + } + } + return twiceMaxEdgePower; +} + +static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah, + struct ath9k_channel *chan, + u8 *pPwrArray, u16 cfgCtl, + u8 twiceAntennaReduction, + u8 twiceMaxRegulatoryPower, + u16 powerLimit) +{ + struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah); + struct ath_common *common = ath9k_hw_common(ah); + struct ar9300_eeprom *pEepData = &ah->eeprom.ar9300_eep; + u16 twiceMaxEdgePower = AR9300_MAX_RATE_POWER; + static const u16 tpScaleReductionTable[5] = { + 0, 3, 6, 9, AR9300_MAX_RATE_POWER + }; + int i; + int16_t twiceLargestAntenna; + u16 scaledPower = 0, minCtlPower, maxRegAllowedPower; + u16 ctlModesFor11a[] = { + CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40 + }; + u16 ctlModesFor11g[] = { + CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, + CTL_11G_EXT, CTL_2GHT40 + }; + u16 numCtlModes, *pCtlMode, ctlMode, freq; + struct chan_centers centers; + u8 *ctlIndex; + u8 ctlNum; + u16 twiceMinEdgePower; + bool is2ghz = IS_CHAN_2GHZ(chan); + + ath9k_hw_get_channel_centers(ah, chan, ¢ers); + + /* Compute TxPower reduction due to Antenna Gain */ + if (is2ghz) + twiceLargestAntenna = pEepData->modalHeader2G.antennaGain; + else + twiceLargestAntenna = pEepData->modalHeader5G.antennaGain; + + twiceLargestAntenna = (int16_t)min((twiceAntennaReduction) - + twiceLargestAntenna, 0); + + /* + * scaledPower is the minimum of the user input power level + * and the regulatory allowed power level + */ + maxRegAllowedPower = twiceMaxRegulatoryPower + twiceLargestAntenna; + + if (regulatory->tp_scale != ATH9K_TP_SCALE_MAX) { + maxRegAllowedPower -= + (tpScaleReductionTable[(regulatory->tp_scale)] * 2); + } + + scaledPower = min(powerLimit, maxRegAllowedPower); + + /* + * Reduce scaled Power by number of chains active to get + * to per chain tx power level + */ + switch (ar5416_get_ntxchains(ah->txchainmask)) { + case 1: + break; + case 2: + scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; + break; + case 3: + scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; + break; + } + + scaledPower = max((u16)0, scaledPower); + + /* + * Get target powers from EEPROM - our baseline for TX Power + */ + if (is2ghz) { + /* Setup for CTL modes */ + /* CTL_11B, CTL_11G, CTL_2GHT20 */ + numCtlModes = + ARRAY_SIZE(ctlModesFor11g) - + SUB_NUM_CTL_MODES_AT_2G_40; + pCtlMode = ctlModesFor11g; + if (IS_CHAN_HT40(chan)) + /* All 2G CTL's */ + numCtlModes = ARRAY_SIZE(ctlModesFor11g); + } else { + /* Setup for CTL modes */ + /* CTL_11A, CTL_5GHT20 */ + numCtlModes = ARRAY_SIZE(ctlModesFor11a) - + SUB_NUM_CTL_MODES_AT_5G_40; + pCtlMode = ctlModesFor11a; + if (IS_CHAN_HT40(chan)) + /* All 5G CTL's */ + numCtlModes = ARRAY_SIZE(ctlModesFor11a); + } + + /* + * For MIMO, need to apply regulatory caps individually across + * dynamically running modes: CCK, OFDM, HT20, HT40 + * + * The outer loop walks through each possible applicable runtime mode. + * The inner loop walks through each ctlIndex entry in EEPROM. + * The ctl value is encoded as [7:4] == test group, [3:0] == test mode. + */ + for (ctlMode = 0; ctlMode < numCtlModes; ctlMode++) { + bool isHt40CtlMode = (pCtlMode[ctlMode] == CTL_5GHT40) || + (pCtlMode[ctlMode] == CTL_2GHT40); + if (isHt40CtlMode) + freq = centers.synth_center; + else if (pCtlMode[ctlMode] & EXT_ADDITIVE) + freq = centers.ext_center; + else + freq = centers.ctl_center; + + ath_print(common, ATH_DBG_REGULATORY, + "LOOP-Mode ctlMode %d < %d, isHt40CtlMode %d, " + "EXT_ADDITIVE %d\n", + ctlMode, numCtlModes, isHt40CtlMode, + (pCtlMode[ctlMode] & EXT_ADDITIVE)); + + /* walk through each CTL index stored in EEPROM */ + if (is2ghz) { + ctlIndex = pEepData->ctlIndex_2G; + ctlNum = AR9300_NUM_CTLS_2G; + } else { + ctlIndex = pEepData->ctlIndex_5G; + ctlNum = AR9300_NUM_CTLS_5G; + } + + for (i = 0; (i < ctlNum) && ctlIndex[i]; i++) { + ath_print(common, ATH_DBG_REGULATORY, + "LOOP-Ctlidx %d: cfgCtl 0x%2.2x " + "pCtlMode 0x%2.2x ctlIndex 0x%2.2x " + "chan %dn", + i, cfgCtl, pCtlMode[ctlMode], ctlIndex[i], + chan->channel); + + /* + * compare test group from regulatory + * channel list with test mode from pCtlMode + * list + */ + if ((((cfgCtl & ~CTL_MODE_M) | + (pCtlMode[ctlMode] & CTL_MODE_M)) == + ctlIndex[i]) || + (((cfgCtl & ~CTL_MODE_M) | + (pCtlMode[ctlMode] & CTL_MODE_M)) == + ((ctlIndex[i] & CTL_MODE_M) | + SD_NO_CTL))) { + twiceMinEdgePower = + ar9003_hw_get_max_edge_power(pEepData, + freq, i, + is2ghz); + + if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL) + /* + * Find the minimum of all CTL + * edge powers that apply to + * this channel + */ + twiceMaxEdgePower = + min(twiceMaxEdgePower, + twiceMinEdgePower); + else { + /* specific */ + twiceMaxEdgePower = + twiceMinEdgePower; + break; + } + } + } + + minCtlPower = (u8)min(twiceMaxEdgePower, scaledPower); + + ath_print(common, ATH_DBG_REGULATORY, + "SEL-Min ctlMode %d pCtlMode %d 2xMaxEdge %d " + "sP %d minCtlPwr %d\n", + ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower, + scaledPower, minCtlPower); + + /* Apply ctl mode to correct target power set */ + switch (pCtlMode[ctlMode]) { + case CTL_11B: + for (i = ALL_TARGET_LEGACY_1L_5L; + i <= ALL_TARGET_LEGACY_11S; i++) + pPwrArray[i] = + (u8)min((u16)pPwrArray[i], + minCtlPower); + break; + case CTL_11A: + case CTL_11G: + for (i = ALL_TARGET_LEGACY_6_24; + i <= ALL_TARGET_LEGACY_54; i++) + pPwrArray[i] = + (u8)min((u16)pPwrArray[i], + minCtlPower); + break; + case CTL_5GHT20: + case CTL_2GHT20: + for (i = ALL_TARGET_HT20_0_8_16; + i <= ALL_TARGET_HT20_21; i++) + pPwrArray[i] = + (u8)min((u16)pPwrArray[i], + minCtlPower); + pPwrArray[ALL_TARGET_HT20_22] = + (u8)min((u16)pPwrArray[ALL_TARGET_HT20_22], + minCtlPower); + pPwrArray[ALL_TARGET_HT20_23] = + (u8)min((u16)pPwrArray[ALL_TARGET_HT20_23], + minCtlPower); + break; + case CTL_5GHT40: + case CTL_2GHT40: + for (i = ALL_TARGET_HT40_0_8_16; + i <= ALL_TARGET_HT40_23; i++) + pPwrArray[i] = + (u8)min((u16)pPwrArray[i], + minCtlPower); + break; + default: + break; + } + } /* end ctl mode checking */ +} + static void ath9k_hw_ar9300_set_txpower(struct ath_hw *ah, struct ath9k_channel *chan, u16 cfgCtl, u8 twiceAntennaReduction, u8 twiceMaxRegulatoryPower, u8 powerLimit) { - ah->txpower_limit = powerLimit; - ar9003_hw_set_target_power_eeprom(ah, chan->channel); + struct ath_common *common = ath9k_hw_common(ah); + u8 targetPowerValT2[ar9300RateSize]; + unsigned int i = 0; + + ar9003_hw_set_target_power_eeprom(ah, chan->channel, targetPowerValT2); + ar9003_hw_set_power_per_rate_table(ah, chan, + targetPowerValT2, cfgCtl, + twiceAntennaReduction, + twiceMaxRegulatoryPower, + powerLimit); + + while (i < ar9300RateSize) { + ath_print(common, ATH_DBG_EEPROM, + "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]); + i++; + ath_print(common, ATH_DBG_EEPROM, + "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]); + i++; + ath_print(common, ATH_DBG_EEPROM, + "TPC[%02d] 0x%08x ", i, targetPowerValT2[i]); + i++; + ath_print(common, ATH_DBG_EEPROM, + "TPC[%02d] 0x%08x\n\n", i, targetPowerValT2[i]); + i++; + } + + /* Write target power array to registers */ + ar9003_hw_tx_power_regwrite(ah, targetPowerValT2); + + /* + * This is the TX power we send back to driver core, + * and it can use to pass to userspace to display our + * currently configured TX power setting. + * + * Since power is rate dependent, use one of the indices + * from the AR9300_Rates enum to select an entry from + * targetPowerValT2[] to report. Currently returns the + * power for HT40 MCS 0, HT20 MCS 0, or OFDM 6 Mbps + * as CCK power is less interesting (?). + */ + i = ALL_TARGET_LEGACY_6_24; /* legacy */ + if (IS_CHAN_HT40(chan)) + i = ALL_TARGET_HT40_0_8_16; /* ht40 */ + else if (IS_CHAN_HT20(chan)) + i = ALL_TARGET_HT20_0_8_16; /* ht20 */ + + ah->txpower_limit = targetPowerValT2[i]; + ar9003_hw_calibration_apply(ah, chan->channel); }