redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

powerpc/virtex: Use generic xilinx irqchip driver 

The Xilinx interrupt controller driver is now available in drivers/irqchip.
Switch to using that driver.

Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
hifive-unleashed-5.1
Zubair Lutfullah Kakakhel 2016-11-14 12:13:51 +00:00 committed by Marc Zyngier
parent 8a11da598e
commit 8328255ff8
7 changed files with 9 additions and 213 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/powerpc/include/asm/xilinx_intc.h
View File

@ -14,7 +14,7 @@
#ifdef __KERNEL__
extern void __init xilinx_intc_init_tree(void);
extern unsigned int xilinx_intc_get_irq(void);
extern unsigned int xintc_get_irq(void);
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_XILINX_INTC_H */

1
arch/powerpc/platforms/40x/Kconfig
View File

@ -64,6 +64,7 @@ config XILINX_VIRTEX_GENERIC_BOARD
default n
select XILINX_VIRTEX_II_PRO
select XILINX_VIRTEX_4_FX
select XILINX_INTC
help
This option enables generic support for Xilinx Virtex based boards.

2
arch/powerpc/platforms/40x/virtex.c
View File

@ -48,7 +48,7 @@ define_machine(virtex) {
.probe = virtex_probe,
.setup_arch = xilinx_pci_init,
.init_IRQ = xilinx_intc_init_tree,
.get_irq = xilinx_intc_get_irq,
.get_irq = xintc_get_irq,
.restart = ppc4xx_reset_system,
.calibrate_decr = generic_calibrate_decr,
};

1
arch/powerpc/platforms/44x/Kconfig
View File

@ -241,6 +241,7 @@ config XILINX_VIRTEX440_GENERIC_BOARD
depends on 44x
default n
select XILINX_VIRTEX_5_FXT
select XILINX_INTC
help
This option enables generic support for Xilinx Virtex based boards
that use a 440 based processor in the Virtex 5 FXT FPGA architecture.

2
arch/powerpc/platforms/44x/virtex.c
View File

@ -54,7 +54,7 @@ define_machine(virtex) {
.probe = virtex_probe,
.setup_arch = xilinx_pci_init,
.init_IRQ = xilinx_intc_init_tree,
.get_irq = xilinx_intc_get_irq,
.get_irq = xintc_get_irq,
.calibrate_decr = generic_calibrate_decr,
.restart = ppc4xx_reset_system,
};

211
arch/powerpc/sysdev/xilinx_intc.c
View File

@ -29,194 +29,7 @@
#include <asm/processor.h>
#include <asm/i8259.h>
#include <asm/irq.h>
/*
* INTC Registers
*/
#define XINTC_ISR 0 /* Interrupt Status */
#define XINTC_IPR 4 /* Interrupt Pending */
#define XINTC_IER 8 /* Interrupt Enable */
#define XINTC_IAR 12 /* Interrupt Acknowledge */
#define XINTC_SIE 16 /* Set Interrupt Enable bits */
#define XINTC_CIE 20 /* Clear Interrupt Enable bits */
#define XINTC_IVR 24 /* Interrupt Vector */
#define XINTC_MER 28 /* Master Enable */
static struct irq_domain *master_irqhost;
#define XILINX_INTC_MAXIRQS (32)
/* The following table allows the interrupt type, edge or level,
* to be cached after being read from the device tree until the interrupt
* is mapped
*/
static int xilinx_intc_typetable[XILINX_INTC_MAXIRQS];
/* Map the interrupt type from the device tree to the interrupt types
* used by the interrupt subsystem
*/
static unsigned char xilinx_intc_map_senses[] = {
IRQ_TYPE_EDGE_RISING,
IRQ_TYPE_EDGE_FALLING,
IRQ_TYPE_LEVEL_HIGH,
IRQ_TYPE_LEVEL_LOW,
};
/*
* The interrupt controller is setup such that it doesn't work well with
* the level interrupt handler in the kernel because the handler acks the
* interrupt before calling the application interrupt handler. To deal with
* that, we use 2 different irq chips so that different functions can be
* used for level and edge type interrupts.
*
* IRQ Chip common (across level and edge) operations
*/
static void xilinx_intc_mask(struct irq_data *d)
{
int irq = irqd_to_hwirq(d);
void * regs = irq_data_get_irq_chip_data(d);
pr_debug("mask: %d\n", irq);
out_be32(regs + XINTC_CIE, 1 << irq);
}
static int xilinx_intc_set_type(struct irq_data *d, unsigned int flow_type)
{
return 0;
}
/*
* IRQ Chip level operations
*/
static void xilinx_intc_level_unmask(struct irq_data *d)
{
int irq = irqd_to_hwirq(d);
void * regs = irq_data_get_irq_chip_data(d);
pr_debug("unmask: %d\n", irq);
out_be32(regs + XINTC_SIE, 1 << irq);
/* ack level irqs because they can't be acked during
* ack function since the handle_level_irq function
* acks the irq before calling the inerrupt handler
*/
out_be32(regs + XINTC_IAR, 1 << irq);
}
static struct irq_chip xilinx_intc_level_irqchip = {
.name = "Xilinx Level INTC",
.irq_mask = xilinx_intc_mask,
.irq_mask_ack = xilinx_intc_mask,
.irq_unmask = xilinx_intc_level_unmask,
.irq_set_type = xilinx_intc_set_type,
};
/*
* IRQ Chip edge operations
*/
static void xilinx_intc_edge_unmask(struct irq_data *d)
{
int irq = irqd_to_hwirq(d);
void *regs = irq_data_get_irq_chip_data(d);
pr_debug("unmask: %d\n", irq);
out_be32(regs + XINTC_SIE, 1 << irq);
}
static void xilinx_intc_edge_ack(struct irq_data *d)
{
int irq = irqd_to_hwirq(d);
void * regs = irq_data_get_irq_chip_data(d);
pr_debug("ack: %d\n", irq);
out_be32(regs + XINTC_IAR, 1 << irq);
}
static struct irq_chip xilinx_intc_edge_irqchip = {
.name = "Xilinx Edge INTC",
.irq_mask = xilinx_intc_mask,
.irq_unmask = xilinx_intc_edge_unmask,
.irq_ack = xilinx_intc_edge_ack,
.irq_set_type = xilinx_intc_set_type,
};
/*
* IRQ Host operations
*/
/**
* xilinx_intc_xlate - translate virq# from device tree interrupts property
*/
static int xilinx_intc_xlate(struct irq_domain *h, struct device_node *ct,
const u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq,
unsigned int *out_flags)
{
if ((intsize < 2) || (intspec[0] >= XILINX_INTC_MAXIRQS))
return -EINVAL;
/* keep a copy of the interrupt type til the interrupt is mapped
*/
xilinx_intc_typetable[intspec[0]] = xilinx_intc_map_senses[intspec[1]];
/* Xilinx uses 2 interrupt entries, the 1st being the h/w
* interrupt number, the 2nd being the interrupt type, edge or level
*/
*out_hwirq = intspec[0];
*out_flags = xilinx_intc_map_senses[intspec[1]];
return 0;
}
static int xilinx_intc_map(struct irq_domain *h, unsigned int virq,
irq_hw_number_t irq)
{
irq_set_chip_data(virq, h->host_data);
if (xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_HIGH ||
xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_LOW) {
irq_set_chip_and_handler(virq, &xilinx_intc_level_irqchip,
handle_level_irq);
} else {
irq_set_chip_and_handler(virq, &xilinx_intc_edge_irqchip,
handle_edge_irq);
}
return 0;
}
static const struct irq_domain_ops xilinx_intc_ops = {
.map = xilinx_intc_map,
.xlate = xilinx_intc_xlate,
};
struct irq_domain * __init
xilinx_intc_init(struct device_node *np)
{
struct irq_domain * irq;
void * regs;
/* Find and map the intc registers */
regs = of_iomap(np, 0);
if (!regs) {
pr_err("xilinx_intc: could not map registers\n");
return NULL;
}
/* Setup interrupt controller */
out_be32(regs + XINTC_IER, 0); /* disable all irqs */
out_be32(regs + XINTC_IAR, ~(u32) 0); /* Acknowledge pending irqs */
out_be32(regs + XINTC_MER, 0x3UL); /* Turn on the Master Enable. */
/* Allocate and initialize an irq_domain structure. */
irq = irq_domain_add_linear(np, XILINX_INTC_MAXIRQS, &xilinx_intc_ops,
regs);
if (!irq)
panic(__FILE__ ": Cannot allocate IRQ host\n");
return irq;
}
int xilinx_intc_get_irq(void)
{
void * regs = master_irqhost->host_data;
pr_debug("get_irq:\n");
return irq_linear_revmap(master_irqhost, in_be32(regs + XINTC_IVR));
}
#include <linux/irqchip.h>
#if defined(CONFIG_PPC_I8259)
/*
@ -265,31 +78,11 @@ static void __init xilinx_i8259_setup_cascade(void)
static inline void xilinx_i8259_setup_cascade(void) { return; }
#endif /* defined(CONFIG_PPC_I8259) */
static const struct of_device_id xilinx_intc_match[] __initconst = {
{ .compatible = "xlnx,opb-intc-1.00.c", },
{ .compatible = "xlnx,xps-intc-1.00.a", },
{}
};
/*
* Initialize master Xilinx interrupt controller
*/
void __init xilinx_intc_init_tree(void)
{
struct device_node *np;
/* find top level interrupt controller */
for_each_matching_node(np, xilinx_intc_match) {
if (!of_get_property(np, "interrupts", NULL))
break;
}
BUG_ON(!np);
master_irqhost = xilinx_intc_init(np);
BUG_ON(!master_irqhost);
irq_set_default_host(master_irqhost);
of_node_put(np);
irqchip_init();
xilinx_i8259_setup_cascade();
}

3
drivers/irqchip/irq-xilinx-intc.c
View File

@ -237,4 +237,5 @@ err_alloc:
}
IRQCHIP_DECLARE(xilinx_intc, "xlnx,xps-intc-1.00.a", xilinx_intc_of_init);
IRQCHIP_DECLARE(xilinx_intc_xps, "xlnx,xps-intc-1.00.a", xilinx_intc_of_init);
IRQCHIP_DECLARE(xilinx_intc_opb, "xlnx,opb-intc-1.00.c", xilinx_intc_of_init);