Merge branch 'depends/clk-for-3.10' into next/cleanup

Bringin in clk subsystem dependencies needed by sunxi.

* depends/clk-for-3.10: (26 commits)
  clk: sunxi: drop an unnecesary kmalloc
  clk: sunxi: drop CLK_IGNORE_UNUSED
  clk: sunxi: Add support for AXI, AHB, APB0 and APB1 gates
  clk: divider: Introduce CLK_DIVIDER_ALLOW_ZERO flag
  clk: mvebu: Use common of_clk_init() function
  clk: fix clk_mux::flags kerneldoc
  clk: allow reentrant calls into the clk framework
  clk: abstract locking out into helper functions
  clk: zynq: Add missing zynq clk header
  clk: sunxi: rename compatible strings
  arm: sunxi: Add useful information about sunxi clocks
  clk: arm: sunxi: Add a new clock driver for sunxi SOCs
  clk: ux500: Fix prcmu clocks registration
  ARM: imx: adapt clk_busy_mux to new clk_mux struct
  clk: Add composite clock type
  clk: add table lookup to mux
  clk: Fix incorrect return type in clk.c
  clk: prima2: fix return value check in sirfsoc_of_clk_init()
  clk:SPEAr1340: Correct parent clock configuration
  documentation: clk: fix couple of misspelling
  ...

Documentation/arm/sunxi/clocks.txt

@@ -0,0 +1,56 @@
+Frequently asked questions about the sunxi clock system
+=======================================================
+
+This document contains useful bits of information that people tend to ask
+about the sunxi clock system, as well as accompanying ASCII art when adequate.
+
+Q: Why is the main 24MHz oscillator gatable? Wouldn't that break the
+   system?
+
+A: The 24MHz oscillator allows gating to save power. Indeed, if gated
+   carelessly the system would stop functioning, but with the right
+   steps, one can gate it and keep the system running. Consider this
+   simplified suspend example:
+
+   While the system is operational, you would see something like
+
+      24MHz         32kHz
+       |
+      PLL1
+       \
+        \_ CPU Mux
+             |
+           [CPU]
+
+   When you are about to suspend, you switch the CPU Mux to the 32kHz
+   oscillator:
+
+      24Mhz         32kHz
+       |              |
+      PLL1            |
+                     /
+           CPU Mux _/
+             |
+           [CPU]
+
+    Finally you can gate the main oscillator
+
+                    32kHz
+                      |
+                      |
+                     /
+           CPU Mux _/
+             |
+           [CPU]
+
+Q: Were can I learn more about the sunxi clocks?
+
+A: The linux-sunxi wiki contains a page documenting the clock registers,
+   you can find it at
+
+        http://linux-sunxi.org/A10/CCM
+
+   The authoritative source for information at this time is the ccmu driver
+   released by Allwinner, you can find it at
+
+        https://github.com/linux-sunxi/linux-sunxi/tree/sunxi-3.0/arch/arm/mach-sun4i/clock/ccmu

Documentation/clk.txt

@@ -174,9 +174,9 @@ int clk_foo_enable(struct clk_hw *hw)
 };
 
 Below is a matrix detailing which clk_ops are mandatory based upon the
-hardware capbilities of that clock.  A cell marked as "y" means
+hardware capabilities of that clock.  A cell marked as "y" means
 mandatory, a cell marked as "n" implies that either including that
-callback is invalid or otherwise uneccesary.  Empty cells are either
+callback is invalid or otherwise unnecessary.  Empty cells are either
 optional or must be evaluated on a case-by-case basis.
 
                            clock hardware characteristics

Documentation/devicetree/bindings/clock/axi-clkgen.txt

@@ -0,0 +1,22 @@
+Binding for the axi-clkgen clock generator
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "adi,axi-clkgen".
+- #clock-cells : from common clock binding; Should always be set to 0.
+- reg : Address and length of the axi-clkgen register set.
+- clocks : Phandle and clock specifier for the parent clock.
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+	clock@0xff000000 {
+		compatible = "adi,axi-clkgen";
+		#clock-cells = <0>;
+		reg = <0xff000000 0x1000>;
+		clocks = <&osc 1>;
+	};

Documentation/devicetree/bindings/clock/sunxi.txt

@@ -0,0 +1,151 @@
+Device Tree Clock bindings for arch-sunxi
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"allwinner,sun4i-osc-clk" - for a gatable oscillator
+	"allwinner,sun4i-pll1-clk" - for the main PLL clock
+	"allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
+	"allwinner,sun4i-axi-clk" - for the AXI clock
+	"allwinner,sun4i-axi-gates-clk" - for the AXI gates
+	"allwinner,sun4i-ahb-clk" - for the AHB clock
+	"allwinner,sun4i-ahb-gates-clk" - for the AHB gates
+	"allwinner,sun4i-apb0-clk" - for the APB0 clock
+	"allwinner,sun4i-apb0-gates-clk" - for the APB0 gates
+	"allwinner,sun4i-apb1-clk" - for the APB1 clock
+	"allwinner,sun4i-apb1-mux-clk" - for the APB1 clock muxing
+	"allwinner,sun4i-apb1-gates-clk" - for the APB1 gates
+
+Required properties for all clocks:
+- reg : shall be the control register address for the clock.
+- clocks : shall be the input parent clock(s) phandle for the clock
+- #clock-cells : from common clock binding; shall be set to 0 except for
+	"allwinner,sun4i-*-gates-clk" where it shall be set to 1
+
+Additionally, "allwinner,sun4i-*-gates-clk" clocks require:
+- clock-output-names : the corresponding gate names that the clock controls
+
+For example:
+
+osc24M: osc24M@01c20050 {
+	#clock-cells = <0>;
+	compatible = "allwinner,sun4i-osc-clk";
+	reg = <0x01c20050 0x4>;
+	clocks = <&osc24M_fixed>;
+};
+
+pll1: pll1@01c20000 {
+	#clock-cells = <0>;
+	compatible = "allwinner,sun4i-pll1-clk";
+	reg = <0x01c20000 0x4>;
+	clocks = <&osc24M>;
+};
+
+cpu: cpu@01c20054 {
+	#clock-cells = <0>;
+	compatible = "allwinner,sun4i-cpu-clk";
+	reg = <0x01c20054 0x4>;
+	clocks = <&osc32k>, <&osc24M>, <&pll1>;
+};
+
+
+
+Gate clock outputs
+
+The "allwinner,sun4i-*-gates-clk" clocks provide several gatable outputs;
+their corresponding offsets as present on sun4i are listed below. Note that
+some of these gates are not present on sun5i.
+
+  * AXI gates ("allwinner,sun4i-axi-gates-clk")
+
+    DRAM                                                                0
+
+  * AHB gates ("allwinner,sun4i-ahb-gates-clk")
+
+    USB0                                                                0
+    EHCI0                                                               1
+    OHCI0                                                               2*
+    EHCI1                                                               3
+    OHCI1                                                               4*
+    SS                                                                  5
+    DMA                                                                 6
+    BIST                                                                7
+    MMC0                                                                8
+    MMC1                                                                9
+    MMC2                                                                10
+    MMC3                                                                11
+    MS                                                                  12**
+    NAND                                                                13
+    SDRAM                                                               14
+
+    ACE                                                                 16
+    EMAC                                                                17
+    TS                                                                  18
+
+    SPI0                                                                20
+    SPI1                                                                21
+    SPI2                                                                22
+    SPI3                                                                23
+    PATA                                                                24
+    SATA                                                                25**
+    GPS                                                                 26*
+
+    VE                                                                  32
+    TVD                                                                 33
+    TVE0                                                                34
+    TVE1                                                                35
+    LCD0                                                                36
+    LCD1                                                                37
+
+    CSI0                                                                40
+    CSI1                                                                41
+
+    HDMI                                                                43
+    DE_BE0                                                              44
+    DE_BE1                                                              45
+    DE_FE0                                                              46
+    DE_FE1                                                              47
+
+    MP                                                                  50
+
+    MALI400                                                             52
+
+  * APB0 gates ("allwinner,sun4i-apb0-gates-clk")
+
+    CODEC                                                               0
+    SPDIF                                                               1*
+    AC97                                                                2
+    IIS                                                                 3
+
+    PIO                                                                 5
+    IR0                                                                 6
+    IR1                                                                 7
+
+    KEYPAD                                                              10
+
+  * APB1 gates ("allwinner,sun4i-apb1-gates-clk")
+
+    I2C0                                                                0
+    I2C1                                                                1
+    I2C2                                                                2
+
+    CAN                                                                 4
+    SCR                                                                 5
+    PS20                                                                6
+    PS21                                                                7
+
+    UART0                                                               16
+    UART1                                                               17
+    UART2                                                               18
+    UART3                                                               19
+    UART4                                                               20
+    UART5                                                               21
+    UART6                                                               22
+    UART7                                                               23
+
+Notation:
+ [*]:  The datasheet didn't mention these, but they are present on AW code
+ [**]: The datasheet had this marked as "NC" but they are used on AW code

arch/arm/mach-imx/clk-busy.c

@@ -169,7 +169,7 @@ struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
 
 	busy->mux.reg = reg;
 	busy->mux.shift = shift;
-	busy->mux.width = width;
+	busy->mux.mask = BIT(width) - 1;
 	busy->mux.lock = &imx_ccm_lock;
 	busy->mux_ops = &clk_mux_ops;
 

drivers/clk/Kconfig

@@ -63,6 +63,14 @@ config CLK_TWL6040
 	  McPDM. McPDM module is using the external bit clock on the McPDM bus
 	  as functional clock.
 
+config COMMON_CLK_AXI_CLKGEN
+	tristate "AXI clkgen driver"
+	depends on ARCH_ZYNQ || MICROBLAZE
+	help
+	---help---
+	  Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
+	  FPGAs. It is commonly used in Analog Devices' reference designs.
+
 endmenu
 
 source "drivers/clk/mvebu/Kconfig"

drivers/clk/Makefile

@@ -7,6 +7,7 @@ obj-$(CONFIG_COMMON_CLK)	+= clk-fixed-factor.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-fixed-rate.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-gate.o
 obj-$(CONFIG_COMMON_CLK)	+= clk-mux.o
+obj-$(CONFIG_COMMON_CLK)	+= clk-composite.o
 
 # SoCs specific
 obj-$(CONFIG_ARCH_BCM2835)	+= clk-bcm2835.o
@@ -23,6 +24,7 @@ ifeq ($(CONFIG_COMMON_CLK), y)
 obj-$(CONFIG_ARCH_MMP)		+= mmp/
 endif
 obj-$(CONFIG_MACH_LOONGSON1)	+= clk-ls1x.o
+obj-$(CONFIG_ARCH_SUNXI)	+= sunxi/
 obj-$(CONFIG_ARCH_U8500)	+= ux500/
 obj-$(CONFIG_ARCH_VT8500)	+= clk-vt8500.o
 obj-$(CONFIG_ARCH_ZYNQ)		+= clk-zynq.o
@@ -31,6 +33,7 @@ obj-$(CONFIG_ARCH_TEGRA)	+= tegra/
 obj-$(CONFIG_X86)		+= x86/
 
 # Chip specific
+obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
 obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
 obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
 obj-$(CONFIG_CLK_TWL6040)	+= clk-twl6040.o

drivers/clk/clk-axi-clkgen.c

@@ -0,0 +1,331 @@
+/*
+ * AXI clkgen driver
+ *
+ * Copyright 2012-2013 Analog Devices Inc.
+ *  Author: Lars-Peter Clausen <lars@metafoo.de>
+ *
+ * Licensed under the GPL-2.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/err.h>
+
+#define AXI_CLKGEN_REG_UPDATE_ENABLE	0x04
+#define AXI_CLKGEN_REG_CLK_OUT1		0x08
+#define AXI_CLKGEN_REG_CLK_OUT2		0x0c
+#define AXI_CLKGEN_REG_CLK_DIV		0x10
+#define AXI_CLKGEN_REG_CLK_FB1		0x14
+#define AXI_CLKGEN_REG_CLK_FB2		0x18
+#define AXI_CLKGEN_REG_LOCK1		0x1c
+#define AXI_CLKGEN_REG_LOCK2		0x20
+#define AXI_CLKGEN_REG_LOCK3		0x24
+#define AXI_CLKGEN_REG_FILTER1		0x28
+#define AXI_CLKGEN_REG_FILTER2		0x2c
+
+struct axi_clkgen {
+	void __iomem *base;
+	struct clk_hw clk_hw;
+};
+
+static uint32_t axi_clkgen_lookup_filter(unsigned int m)
+{
+	switch (m) {
+	case 0:
+		return 0x01001990;
+	case 1:
+		return 0x01001190;
+	case 2:
+		return 0x01009890;
+	case 3:
+		return 0x01001890;
+	case 4:
+		return 0x01008890;
+	case 5 ... 8:
+		return 0x01009090;
+	case 9 ... 11:
+		return 0x01000890;
+	case 12:
+		return 0x08009090;
+	case 13 ... 22:
+		return 0x01001090;
+	case 23 ... 36:
+		return 0x01008090;
+	case 37 ... 46:
+		return 0x08001090;
+	default:
+		return 0x08008090;
+	}
+}
+
+static const uint32_t axi_clkgen_lock_table[] = {
+	0x060603e8, 0x060603e8, 0x080803e8, 0x0b0b03e8,
+	0x0e0e03e8, 0x111103e8, 0x131303e8, 0x161603e8,
+	0x191903e8, 0x1c1c03e8, 0x1f1f0384, 0x1f1f0339,
+	0x1f1f02ee, 0x1f1f02bc, 0x1f1f028a, 0x1f1f0271,
+	0x1f1f023f, 0x1f1f0226, 0x1f1f020d, 0x1f1f01f4,
+	0x1f1f01db, 0x1f1f01c2, 0x1f1f01a9, 0x1f1f0190,
+	0x1f1f0190, 0x1f1f0177, 0x1f1f015e, 0x1f1f015e,
+	0x1f1f0145, 0x1f1f0145, 0x1f1f012c, 0x1f1f012c,
+	0x1f1f012c, 0x1f1f0113, 0x1f1f0113, 0x1f1f0113,
+};
+
+static uint32_t axi_clkgen_lookup_lock(unsigned int m)
+{
+	if (m < ARRAY_SIZE(axi_clkgen_lock_table))
+		return axi_clkgen_lock_table[m];
+	return 0x1f1f00fa;
+}
+
+static const unsigned int fpfd_min = 10000;
+static const unsigned int fpfd_max = 300000;
+static const unsigned int fvco_min = 600000;
+static const unsigned int fvco_max = 1200000;
+
+static void axi_clkgen_calc_params(unsigned long fin, unsigned long fout,
+	unsigned int *best_d, unsigned int *best_m, unsigned int *best_dout)
+{
+	unsigned long d, d_min, d_max, _d_min, _d_max;
+	unsigned long m, m_min, m_max;
+	unsigned long f, dout, best_f, fvco;
+
+	fin /= 1000;
+	fout /= 1000;
+
+	best_f = ULONG_MAX;
+	*best_d = 0;
+	*best_m = 0;
+	*best_dout = 0;
+
+	d_min = max_t(unsigned long, DIV_ROUND_UP(fin, fpfd_max), 1);
+	d_max = min_t(unsigned long, fin / fpfd_min, 80);
+
+	m_min = max_t(unsigned long, DIV_ROUND_UP(fvco_min, fin) * d_min, 1);
+	m_max = min_t(unsigned long, fvco_max * d_max / fin, 64);
+
+	for (m = m_min; m <= m_max; m++) {
+		_d_min = max(d_min, DIV_ROUND_UP(fin * m, fvco_max));
+		_d_max = min(d_max, fin * m / fvco_min);
+
+		for (d = _d_min; d <= _d_max; d++) {
+			fvco = fin * m / d;
+
+			dout = DIV_ROUND_CLOSEST(fvco, fout);
+			dout = clamp_t(unsigned long, dout, 1, 128);
+			f = fvco / dout;
+			if (abs(f - fout) < abs(best_f - fout)) {
+				best_f = f;
+				*best_d = d;
+				*best_m = m;
+				*best_dout = dout;
+				if (best_f == fout)
+					return;
+			}
+		}
+	}
+}
+
+static void axi_clkgen_calc_clk_params(unsigned int divider, unsigned int *low,
+	unsigned int *high, unsigned int *edge, unsigned int *nocount)
+{
+	if (divider == 1)
+		*nocount = 1;
+	else
+		*nocount = 0;
+
+	*high = divider / 2;
+	*edge = divider % 2;
+	*low = divider - *high;
+}
+
+static void axi_clkgen_write(struct axi_clkgen *axi_clkgen,
+	unsigned int reg, unsigned int val)
+{
+	writel(val, axi_clkgen->base + reg);
+}
+
+static void axi_clkgen_read(struct axi_clkgen *axi_clkgen,
+	unsigned int reg, unsigned int *val)
+{
+	*val = readl(axi_clkgen->base + reg);
+}
+
+static struct axi_clkgen *clk_hw_to_axi_clkgen(struct clk_hw *clk_hw)
+{
+	return container_of(clk_hw, struct axi_clkgen, clk_hw);
+}
+
+static int axi_clkgen_set_rate(struct clk_hw *clk_hw,
+	unsigned long rate, unsigned long parent_rate)
+{
+	struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw);
+	unsigned int d, m, dout;
+	unsigned int nocount;
+	unsigned int high;
+	unsigned int edge;
+	unsigned int low;
+	uint32_t filter;
+	uint32_t lock;
+
+	if (parent_rate == 0 || rate == 0)
+		return -EINVAL;
+
+	axi_clkgen_calc_params(parent_rate, rate, &d, &m, &dout);
+
+	if (d == 0 || dout == 0 || m == 0)
+		return -EINVAL;
+
+	filter = axi_clkgen_lookup_filter(m - 1);
+	lock = axi_clkgen_lookup_lock(m - 1);
+
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_UPDATE_ENABLE, 0);
+
+	axi_clkgen_calc_clk_params(dout, &low, &high, &edge, &nocount);
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT1,
+		(high << 6) | low);
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT2,
+		(edge << 7) | (nocount << 6));
+
+	axi_clkgen_calc_clk_params(d, &low, &high, &edge, &nocount);
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_DIV,
+		(edge << 13) | (nocount << 12) | (high << 6) | low);
+
+	axi_clkgen_calc_clk_params(m, &low, &high, &edge, &nocount);
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_FB1,
+		(high << 6) | low);
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_CLK_FB2,
+		(edge << 7) | (nocount << 6));
+
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK1, lock & 0x3ff);
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK2,
+		(((lock >> 16) & 0x1f) << 10) | 0x1);
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_LOCK3,
+		(((lock >> 24) & 0x1f) << 10) | 0x3e9);
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_FILTER1, filter >> 16);
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_FILTER2, filter);
+
+	axi_clkgen_write(axi_clkgen, AXI_CLKGEN_REG_UPDATE_ENABLE, 1);
+
+	return 0;
+}
+
+static long axi_clkgen_round_rate(struct clk_hw *hw, unsigned long rate,
+	unsigned long *parent_rate)
+{
+	unsigned int d, m, dout;
+
+	axi_clkgen_calc_params(*parent_rate, rate, &d, &m, &dout);
+
+	if (d == 0 || dout == 0 || m == 0)
+		return -EINVAL;
+
+	return *parent_rate / d * m / dout;
+}
+
+static unsigned long axi_clkgen_recalc_rate(struct clk_hw *clk_hw,
+	unsigned long parent_rate)
+{
+	struct axi_clkgen *axi_clkgen = clk_hw_to_axi_clkgen(clk_hw);
+	unsigned int d, m, dout;
+	unsigned int reg;
+	unsigned long long tmp;
+
+	axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_OUT1, &reg);
+	dout = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+	axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_DIV, &reg);
+	d = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+	axi_clkgen_read(axi_clkgen, AXI_CLKGEN_REG_CLK_FB1, &reg);
+	m = (reg & 0x3f) + ((reg >> 6) & 0x3f);
+
+	if (d == 0 || dout == 0)
+		return 0;
+
+	tmp = (unsigned long long)(parent_rate / d) * m;
+	do_div(tmp, dout);
+
+	if (tmp > ULONG_MAX)
+		return ULONG_MAX;
+
+	return tmp;
+}
+
+static const struct clk_ops axi_clkgen_ops = {
+	.recalc_rate = axi_clkgen_recalc_rate,
+	.round_rate = axi_clkgen_round_rate,
+	.set_rate = axi_clkgen_set_rate,
+};
+
+static int axi_clkgen_probe(struct platform_device *pdev)
+{
+	struct axi_clkgen *axi_clkgen;
+	struct clk_init_data init;
+	const char *parent_name;
+	const char *clk_name;
+	struct resource *mem;
+	struct clk *clk;
+
+	axi_clkgen = devm_kzalloc(&pdev->dev, sizeof(*axi_clkgen), GFP_KERNEL);
+	if (!axi_clkgen)
+		return -ENOMEM;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	axi_clkgen->base = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(axi_clkgen->base))
+		return PTR_ERR(axi_clkgen->base);
+
+	parent_name = of_clk_get_parent_name(pdev->dev.of_node, 0);
+	if (!parent_name)
+		return -EINVAL;
+
+	clk_name = pdev->dev.of_node->name;
+	of_property_read_string(pdev->dev.of_node, "clock-output-names",
+		&clk_name);
+
+	init.name = clk_name;
+	init.ops = &axi_clkgen_ops;
+	init.flags = 0;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	axi_clkgen->clk_hw.init = &init;
+	clk = devm_clk_register(&pdev->dev, &axi_clkgen->clk_hw);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	return of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get,
+				    clk);
+}
+
+static int axi_clkgen_remove(struct platform_device *pdev)
+{
+	of_clk_del_provider(pdev->dev.of_node);
+
+	return 0;
+}
+
+static const struct of_device_id axi_clkgen_ids[] = {
+	{ .compatible = "adi,axi-clkgen-1.00.a" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, axi_clkgen_ids);
+
+static struct platform_driver axi_clkgen_driver = {
+	.driver = {
+		.name = "adi-axi-clkgen",
+		.owner = THIS_MODULE,
+		.of_match_table = axi_clkgen_ids,
+	},
+	.probe = axi_clkgen_probe,
+	.remove = axi_clkgen_remove,
+};
+module_platform_driver(axi_clkgen_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Driver for the Analog Devices' AXI clkgen pcore clock generator");

drivers/clk/clk-composite.c

@@ -0,0 +1,201 @@
+/*
+ * Copyright (c) 2013 NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+#define to_clk_composite(_hw) container_of(_hw, struct clk_composite, hw)
+
+static u8 clk_composite_get_parent(struct clk_hw *hw)
+{
+	struct clk_composite *composite = to_clk_composite(hw);
+	const struct clk_ops *mux_ops = composite->mux_ops;
+	struct clk_hw *mux_hw = composite->mux_hw;
+
+	mux_hw->clk = hw->clk;
+
+	return mux_ops->get_parent(mux_hw);
+}
+
+static int clk_composite_set_parent(struct clk_hw *hw, u8 index)
+{
+	struct clk_composite *composite = to_clk_composite(hw);
+	const struct clk_ops *mux_ops = composite->mux_ops;
+	struct clk_hw *mux_hw = composite->mux_hw;
+
+	mux_hw->clk = hw->clk;
+
+	return mux_ops->set_parent(mux_hw, index);
+}
+
+static unsigned long clk_composite_recalc_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct clk_composite *composite = to_clk_composite(hw);
+	const struct clk_ops *div_ops = composite->div_ops;
+	struct clk_hw *div_hw = composite->div_hw;
+
+	div_hw->clk = hw->clk;
+
+	return div_ops->recalc_rate(div_hw, parent_rate);
+}
+
+static long clk_composite_round_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long *prate)
+{
+	struct clk_composite *composite = to_clk_composite(hw);
+	const struct clk_ops *div_ops = composite->div_ops;
+	struct clk_hw *div_hw = composite->div_hw;
+
+	div_hw->clk = hw->clk;
+
+	return div_ops->round_rate(div_hw, rate, prate);
+}
+
+static int clk_composite_set_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long parent_rate)
+{
+	struct clk_composite *composite = to_clk_composite(hw);
+	const struct clk_ops *div_ops = composite->div_ops;
+	struct clk_hw *div_hw = composite->div_hw;
+
+	div_hw->clk = hw->clk;
+
+	return div_ops->set_rate(div_hw, rate, parent_rate);
+}
+
+static int clk_composite_is_enabled(struct clk_hw *hw)
+{
+	struct clk_composite *composite = to_clk_composite(hw);
+	const struct clk_ops *gate_ops = composite->gate_ops;
+	struct clk_hw *gate_hw = composite->gate_hw;
+
+	gate_hw->clk = hw->clk;
+
+	return gate_ops->is_enabled(gate_hw);
+}
+
+static int clk_composite_enable(struct clk_hw *hw)
+{
+	struct clk_composite *composite = to_clk_composite(hw);
+	const struct clk_ops *gate_ops = composite->gate_ops;
+	struct clk_hw *gate_hw = composite->gate_hw;
+
+	gate_hw->clk = hw->clk;
+
+	return gate_ops->enable(gate_hw);
+}
+
+static void clk_composite_disable(struct clk_hw *hw)
+{
+	struct clk_composite *composite = to_clk_composite(hw);
+	const struct clk_ops *gate_ops = composite->gate_ops;
+	struct clk_hw *gate_hw = composite->gate_hw;
+
+	gate_hw->clk = hw->clk;
+
+	gate_ops->disable(gate_hw);
+}
+
+struct clk *clk_register_composite(struct device *dev, const char *name,
+			const char **parent_names, int num_parents,
+			struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
+			struct clk_hw *div_hw, const struct clk_ops *div_ops,
+			struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
+			unsigned long flags)
+{
+	struct clk *clk;
+	struct clk_init_data init;
+	struct clk_composite *composite;
+	struct clk_ops *clk_composite_ops;
+
+	composite = kzalloc(sizeof(*composite), GFP_KERNEL);
+	if (!composite) {
+		pr_err("%s: could not allocate composite clk\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	init.name = name;
+	init.flags = flags | CLK_IS_BASIC;
+	init.parent_names = parent_names;
+	init.num_parents = num_parents;
+
+	clk_composite_ops = &composite->ops;
+
+	if (mux_hw && mux_ops) {
+		if (!mux_ops->get_parent || !mux_ops->set_parent) {
+			clk = ERR_PTR(-EINVAL);
+			goto err;
+		}
+
+		composite->mux_hw = mux_hw;
+		composite->mux_ops = mux_ops;
+		clk_composite_ops->get_parent = clk_composite_get_parent;
+		clk_composite_ops->set_parent = clk_composite_set_parent;
+	}
+
+	if (div_hw && div_ops) {
+		if (!div_ops->recalc_rate || !div_ops->round_rate ||
+		    !div_ops->set_rate) {
+			clk = ERR_PTR(-EINVAL);
+			goto err;
+		}
+
+		composite->div_hw = div_hw;
+		composite->div_ops = div_ops;
+		clk_composite_ops->recalc_rate = clk_composite_recalc_rate;
+		clk_composite_ops->round_rate = clk_composite_round_rate;
+		clk_composite_ops->set_rate = clk_composite_set_rate;
+	}
+
+	if (gate_hw && gate_ops) {
+		if (!gate_ops->is_enabled || !gate_ops->enable ||
+		    !gate_ops->disable) {
+			clk = ERR_PTR(-EINVAL);
+			goto err;
+		}
+
+		composite->gate_hw = gate_hw;
+		composite->gate_ops = gate_ops;
+		clk_composite_ops->is_enabled = clk_composite_is_enabled;
+		clk_composite_ops->enable = clk_composite_enable;
+		clk_composite_ops->disable = clk_composite_disable;
+	}
+
+	init.ops = clk_composite_ops;
+	composite->hw.init = &init;
+
+	clk = clk_register(dev, &composite->hw);
+	if (IS_ERR(clk))
+		goto err;
+
+	if (composite->mux_hw)
+		composite->mux_hw->clk = clk;
+
+	if (composite->div_hw)
+		composite->div_hw->clk = clk;
+
+	if (composite->gate_hw)
+		composite->gate_hw->clk = clk;
+
+	return clk;
+
+err:
+	kfree(composite);
+	return clk;
+}

drivers/clk/clk-divider.c

@@ -109,8 +109,9 @@ static unsigned long clk_divider_recalc_rate(struct clk_hw *hw,
 
 	div = _get_div(divider, val);
 	if (!div) {
-		WARN(1, "%s: Invalid divisor for clock %s\n", __func__,
-						__clk_get_name(hw->clk));
+		WARN(!(divider->flags & CLK_DIVIDER_ALLOW_ZERO),
+			"%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n",
+			__clk_get_name(hw->clk));
 		return parent_rate;
 	}
 

drivers/clk/clk-mux.c

@@ -32,6 +32,7 @@
 static u8 clk_mux_get_parent(struct clk_hw *hw)
 {
 	struct clk_mux *mux = to_clk_mux(hw);
+	int num_parents = __clk_get_num_parents(hw->clk);
 	u32 val;
 
 	/*
@@ -42,7 +43,16 @@ static u8 clk_mux_get_parent(struct clk_hw *hw)
 	 * val = 0x4 really means "bit 2, index starts at bit 0"
 	 */
 	val = readl(mux->reg) >> mux->shift;
-	val &= (1 << mux->width) - 1;
+	val &= mux->mask;
+
+	if (mux->table) {
+		int i;
+
+		for (i = 0; i < num_parents; i++)
+			if (mux->table[i] == val)
+				return i;
+		return -EINVAL;
+	}
 
 	if (val && (mux->flags & CLK_MUX_INDEX_BIT))
 		val = ffs(val) - 1;
@@ -50,7 +60,7 @@ static u8 clk_mux_get_parent(struct clk_hw *hw)
 	if (val && (mux->flags & CLK_MUX_INDEX_ONE))
 		val--;
 
-	if (val >= __clk_get_num_parents(hw->clk))
+	if (val >= num_parents)
 		return -EINVAL;
 
 	return val;
@@ -62,17 +72,22 @@ static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
 	u32 val;
 	unsigned long flags = 0;
 
-	if (mux->flags & CLK_MUX_INDEX_BIT)
-		index = (1 << ffs(index));
+	if (mux->table)
+		index = mux->table[index];
 
-	if (mux->flags & CLK_MUX_INDEX_ONE)
-		index++;
+	else {
+		if (mux->flags & CLK_MUX_INDEX_BIT)
+			index = (1 << ffs(index));
+
+		if (mux->flags & CLK_MUX_INDEX_ONE)
+			index++;
+	}
 
 	if (mux->lock)
 		spin_lock_irqsave(mux->lock, flags);
 
 	val = readl(mux->reg);
-	val &= ~(((1 << mux->width) - 1) << mux->shift);
+	val &= ~(mux->mask << mux->shift);
 	val |= index << mux->shift;
 	writel(val, mux->reg);
 
@@ -88,10 +103,10 @@ const struct clk_ops clk_mux_ops = {
 };
 EXPORT_SYMBOL_GPL(clk_mux_ops);
 
-struct clk *clk_register_mux(struct device *dev, const char *name,
+struct clk *clk_register_mux_table(struct device *dev, const char *name,
 		const char **parent_names, u8 num_parents, unsigned long flags,
-		void __iomem *reg, u8 shift, u8 width,
-		u8 clk_mux_flags, spinlock_t *lock)
+		void __iomem *reg, u8 shift, u32 mask,
+		u8 clk_mux_flags, u32 *table, spinlock_t *lock)
 {
 	struct clk_mux *mux;
 	struct clk *clk;
@@ -113,9 +128,10 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 	/* struct clk_mux assignments */
 	mux->reg = reg;
 	mux->shift = shift;
-	mux->width = width;
+	mux->mask = mask;
 	mux->flags = clk_mux_flags;
 	mux->lock = lock;
+	mux->table = table;
 	mux->hw.init = &init;
 
 	clk = clk_register(dev, &mux->hw);
@@ -125,3 +141,15 @@ struct clk *clk_register_mux(struct device *dev, const char *name,
 
 	return clk;
 }
+
+struct clk *clk_register_mux(struct device *dev, const char *name,
+		const char **parent_names, u8 num_parents, unsigned long flags,
+		void __iomem *reg, u8 shift, u8 width,
+		u8 clk_mux_flags, spinlock_t *lock)
+{
+	u32 mask = BIT(width) - 1;
+
+	return clk_register_mux_table(dev, name, parent_names, num_parents,
+				      flags, reg, shift, mask, clk_mux_flags,
+				      NULL, lock);
+}

drivers/clk/clk-prima2.c

@@ -1113,7 +1113,7 @@ void __init sirfsoc_of_clk_init(void)
 
 	for (i = pll1; i < maxclk; i++) {
 		prima2_clks[i] = clk_register(NULL, prima2_clk_hw_array[i]);
-		BUG_ON(!prima2_clks[i]);
+		BUG_ON(IS_ERR(prima2_clks[i]));
 	}
 	clk_register_clkdev(prima2_clks[cpu], NULL, "cpu");
 	clk_register_clkdev(prima2_clks[io],  NULL, "io");

drivers/clk/clk-zynq.c

@@ -20,6 +20,7 @@
 #include <linux/slab.h>
 #include <linux/kernel.h>
 #include <linux/clk-provider.h>
+#include <linux/clk/zynq.h>
 
 static void __iomem *slcr_base;
 

drivers/clk/clk.c

@@ -19,14 +19,77 @@
 #include <linux/of.h>
 #include <linux/device.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 
 static DEFINE_SPINLOCK(enable_lock);
 static DEFINE_MUTEX(prepare_lock);
 
+static struct task_struct *prepare_owner;
+static struct task_struct *enable_owner;
+
+static int prepare_refcnt;
+static int enable_refcnt;
+
 static HLIST_HEAD(clk_root_list);
 static HLIST_HEAD(clk_orphan_list);
 static LIST_HEAD(clk_notifier_list);
 
+/***           locking             ***/
+static void clk_prepare_lock(void)
+{
+	if (!mutex_trylock(&prepare_lock)) {
+		if (prepare_owner == current) {
+			prepare_refcnt++;
+			return;
+		}
+		mutex_lock(&prepare_lock);
+	}
+	WARN_ON_ONCE(prepare_owner != NULL);
+	WARN_ON_ONCE(prepare_refcnt != 0);
+	prepare_owner = current;
+	prepare_refcnt = 1;
+}
+
+static void clk_prepare_unlock(void)
+{
+	WARN_ON_ONCE(prepare_owner != current);
+	WARN_ON_ONCE(prepare_refcnt == 0);
+
+	if (--prepare_refcnt)
+		return;
+	prepare_owner = NULL;
+	mutex_unlock(&prepare_lock);
+}
+
+static unsigned long clk_enable_lock(void)
+{
+	unsigned long flags;
+
+	if (!spin_trylock_irqsave(&enable_lock, flags)) {
+		if (enable_owner == current) {
+			enable_refcnt++;
+			return flags;
+		}
+		spin_lock_irqsave(&enable_lock, flags);
+	}
+	WARN_ON_ONCE(enable_owner != NULL);
+	WARN_ON_ONCE(enable_refcnt != 0);
+	enable_owner = current;
+	enable_refcnt = 1;
+	return flags;
+}
+
+static void clk_enable_unlock(unsigned long flags)
+{
+	WARN_ON_ONCE(enable_owner != current);
+	WARN_ON_ONCE(enable_refcnt == 0);
+
+	if (--enable_refcnt)
+		return;
+	enable_owner = NULL;
+	spin_unlock_irqrestore(&enable_lock, flags);
+}
+
 /***        debugfs support        ***/
 
 #ifdef CONFIG_COMMON_CLK_DEBUG
@@ -69,7 +132,7 @@ static int clk_summary_show(struct seq_file *s, void *data)
 	seq_printf(s, "   clock                        enable_cnt  prepare_cnt  rate\n");
 	seq_printf(s, "---------------------------------------------------------------------\n");
 
-	mutex_lock(&prepare_lock);
+	clk_prepare_lock();
 
 	hlist_for_each_entry(c, &clk_root_list, child_node)
 		clk_summary_show_subtree(s, c, 0);
@@ -77,7 +140,7 @@ static int clk_summary_show(struct seq_file *s, void *data)
 	hlist_for_each_entry(c, &clk_orphan_list, child_node)
 		clk_summary_show_subtree(s, c, 0);
 
-	mutex_unlock(&prepare_lock);
+	clk_prepare_unlock();
 
 	return 0;
 }
@@ -130,7 +193,7 @@ static int clk_dump(struct seq_file *s, void *data)
 
 	seq_printf(s, "{");
 
-	mutex_lock(&prepare_lock);
+	clk_prepare_lock();
 
 	hlist_for_each_entry(c, &clk_root_list, child_node) {
 		if (!first_node)
@@ -144,7 +207,7 @@ static int clk_dump(struct seq_file *s, void *data)
 		clk_dump_subtree(s, c, 0);
 	}
 
-	mutex_unlock(&prepare_lock);
+	clk_prepare_unlock();
 
 	seq_printf(s, "}");
 	return 0;
@@ -316,7 +379,7 @@ static int __init clk_debug_init(void)
 	if (!orphandir)
 		return -ENOMEM;
 
-	mutex_lock(&prepare_lock);
+	clk_prepare_lock();
 
 	hlist_for_each_entry(clk, &clk_root_list, child_node)
 		clk_debug_create_subtree(clk, rootdir);
@@ -326,7 +389,7 @@ static int __init clk_debug_init(void)
 
 	inited = 1;
 
-	mutex_unlock(&prepare_lock);
+	clk_prepare_unlock();
 
 	return 0;
 }
@@ -335,6 +398,31 @@ late_initcall(clk_debug_init);
 static inline int clk_debug_register(struct clk *clk) { return 0; }
 #endif
 
+/* caller must hold prepare_lock */
+static void clk_unprepare_unused_subtree(struct clk *clk)
+{
+	struct clk *child;
+
+	if (!clk)
+		return;
+
+	hlist_for_each_entry(child, &clk->children, child_node)
+		clk_unprepare_unused_subtree(child);
+
+	if (clk->prepare_count)
+		return;
+
+	if (clk->flags & CLK_IGNORE_UNUSED)
+		return;
+
+	if (__clk_is_prepared(clk)) {
+		if (clk->ops->unprepare_unused)
+			clk->ops->unprepare_unused(clk->hw);
+		else if (clk->ops->unprepare)
+			clk->ops->unprepare(clk->hw);
+	}
+}
+
 /* caller must hold prepare_lock */
 static void clk_disable_unused_subtree(struct clk *clk)
 {
@@ -347,7 +435,7 @@ static void clk_disable_unused_subtree(struct clk *clk)
 	hlist_for_each_entry(child, &clk->children, child_node)
 		clk_disable_unused_subtree(child);
 
-	spin_lock_irqsave(&enable_lock, flags);
+	flags = clk_enable_lock();
 
 	if (clk->enable_count)
 		goto unlock_out;
@@ -368,7 +456,7 @@ static void clk_disable_unused_subtree(struct clk *clk)
 	}
 
 unlock_out:
-	spin_unlock_irqrestore(&enable_lock, flags);
+	clk_enable_unlock(flags);
 
 out:
 	return;
@@ -378,7 +466,7 @@ static int clk_disable_unused(void)
 {
 	struct clk *clk;
 
-	mutex_lock(&prepare_lock);
+	clk_prepare_lock();
 
 	hlist_for_each_entry(clk, &clk_root_list, child_node)
 		clk_disable_unused_subtree(clk);
@@ -386,7 +474,13 @@ static int clk_disable_unused(void)
 	hlist_for_each_entry(clk, &clk_orphan_list, child_node)
 		clk_disable_unused_subtree(clk);
 
-	mutex_unlock(&prepare_lock);
+	hlist_for_each_entry(clk, &clk_root_list, child_node)
+		clk_unprepare_unused_subtree(clk);
+
+	hlist_for_each_entry(clk, &clk_orphan_list, child_node)
+		clk_unprepare_unused_subtree(clk);
+
+	clk_prepare_unlock();
 
 	return 0;
 }
@@ -451,6 +545,27 @@ unsigned long __clk_get_flags(struct clk *clk)
 	return !clk ? 0 : clk->flags;
 }
 
+bool __clk_is_prepared(struct clk *clk)
+{
+	int ret;
+
+	if (!clk)
+		return false;
+
+	/*
+	 * .is_prepared is optional for clocks that can prepare
+	 * fall back to software usage counter if it is missing
+	 */
+	if (!clk->ops->is_prepared) {
+		ret = clk->prepare_count ? 1 : 0;
+		goto out;
+	}
+
+	ret = clk->ops->is_prepared(clk->hw);
+out:
+	return !!ret;
+}
+
 bool __clk_is_enabled(struct clk *clk)
 {
 	int ret;
@@ -548,9 +663,9 @@ void __clk_unprepare(struct clk *clk)
  */
 void clk_unprepare(struct clk *clk)
 {
-	mutex_lock(&prepare_lock);
+	clk_prepare_lock();
 	__clk_unprepare(clk);
-	mutex_unlock(&prepare_lock);
+	clk_prepare_unlock();
 }
 EXPORT_SYMBOL_GPL(clk_unprepare);
 
@@ -596,9 +711,9 @@ int clk_prepare(struct clk *clk)
 {
 	int ret;
 
-	mutex_lock(&prepare_lock);
+	clk_prepare_lock();
 	ret = __clk_prepare(clk);
-	mutex_unlock(&prepare_lock);
+	clk_prepare_unlock();
 
 	return ret;
 }
@@ -640,9 +755,9 @@ void clk_disable(struct clk *clk)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&enable_lock, flags);
+	flags = clk_enable_lock();
 	__clk_disable(clk);
-	spin_unlock_irqrestore(&enable_lock, flags);
+	clk_enable_unlock(flags);
 }
 EXPORT_SYMBOL_GPL(clk_disable);
 
@@ -693,9 +808,9 @@ int clk_enable(struct clk *clk)
 	unsigned long flags;
 	int ret;
 
-	spin_lock_irqsave(&enable_lock, flags);
+	flags = clk_enable_lock();
 	ret = __clk_enable(clk);
-	spin_unlock_irqrestore(&enable_lock, flags);
+	clk_enable_unlock(flags);
 
 	return ret;
 }
@@ -740,9 +855,9 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 {
 	unsigned long ret;
 
-	mutex_lock(&prepare_lock);
+	clk_prepare_lock();
 	ret = __clk_round_rate(clk, rate);
-	mutex_unlock(&prepare_lock);
+	clk_prepare_unlock();
 
 	return ret;
 }
@@ -837,13 +952,13 @@ unsigned long clk_get_rate(struct clk *clk)
 {
 	unsigned long rate;
 
-	mutex_lock(&prepare_lock);
+	clk_prepare_lock();
 
 	if (clk && (clk->flags & CLK_GET_RATE_NOCACHE))
 		__clk_recalc_rates(clk, 0);
 
 	rate = __clk_get_rate(clk);
-	mutex_unlock(&prepare_lock);
+	clk_prepare_unlock();
 
 	return rate;
 }
@@ -974,7 +1089,7 @@ static struct clk *clk_propagate_rate_change(struct clk *clk, unsigned long even
 	int ret = NOTIFY_DONE;
 
 	if (clk->rate == clk->new_rate)
-		return 0;
+		return NULL;
 
 	if (clk->notifier_count) {
 		ret = __clk_notify(clk, event, clk->rate, clk->new_rate);
@@ -1048,7 +1163,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	int ret = 0;
 
 	/* prevent racing with updates to the clock topology */
-	mutex_lock(&prepare_lock);
+	clk_prepare_lock();
 
 	/* bail early if nothing to do */
 	if (rate == clk->rate)
@@ -1080,7 +1195,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
 	clk_change_rate(top);
 
 out:
-	mutex_unlock(&prepare_lock);
+	clk_prepare_unlock();
 
 	return ret;
 }
@@ -1096,9 +1211,9 @@ struct clk *clk_get_parent(struct clk *clk)
 {
 	struct clk *parent;
 
-	mutex_lock(&prepare_lock);
+	clk_prepare_lock();
 	parent = __clk_get_parent(clk);
-	mutex_unlock(&prepare_lock);
+	clk_prepare_unlock();
 
 	return parent;
 }
@@ -1242,19 +1357,19 @@ static int __clk_set_parent(struct clk *clk, struct clk *parent)
 		__clk_prepare(parent);
 
 	/* FIXME replace with clk_is_enabled(clk) someday */
-	spin_lock_irqsave(&enable_lock, flags);
+	flags = clk_enable_lock();
 	if (clk->enable_count)
 		__clk_enable(parent);
-	spin_unlock_irqrestore(&enable_lock, flags);
+	clk_enable_unlock(flags);
 
 	/* change clock input source */
 	ret = clk->ops->set_parent(clk->hw, i);
 
 	/* clean up old prepare and enable */
-	spin_lock_irqsave(&enable_lock, flags);
+	flags = clk_enable_lock();
 	if (clk->enable_count)
 		__clk_disable(old_parent);
-	spin_unlock_irqrestore(&enable_lock, flags);
+	clk_enable_unlock(flags);
 
 	if (clk->prepare_count)
 		__clk_unprepare(old_parent);
@@ -1286,7 +1401,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 		return -ENOSYS;
 
 	/* prevent racing with updates to the clock topology */
-	mutex_lock(&prepare_lock);
+	clk_prepare_lock();
 
 	if (clk->parent == parent)
 		goto out;
@@ -1315,7 +1430,7 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
 	__clk_reparent(clk, parent);
 
 out:
-	mutex_unlock(&prepare_lock);
+	clk_prepare_unlock();
 
 	return ret;
 }
@@ -1338,7 +1453,7 @@ int __clk_init(struct device *dev, struct clk *clk)
 	if (!clk)
 		return -EINVAL;
 
-	mutex_lock(&prepare_lock);
+	clk_prepare_lock();
 
 	/* check to see if a clock with this name is already registered */
 	if (__clk_lookup(clk->name)) {
@@ -1462,7 +1577,7 @@ int __clk_init(struct device *dev, struct clk *clk)
 	clk_debug_register(clk);
 
 out:
-	mutex_unlock(&prepare_lock);
+	clk_prepare_unlock();
 
 	return ret;
 }
@@ -1696,7 +1811,7 @@ int clk_notifier_register(struct clk *clk, struct notifier_block *nb)
 	if (!clk || !nb)
 		return -EINVAL;
 
-	mutex_lock(&prepare_lock);
+	clk_prepare_lock();
 
 	/* search the list of notifiers for this clk */
 	list_for_each_entry(cn, &clk_notifier_list, node)
@@ -1720,7 +1835,7 @@ int clk_notifier_register(struct clk *clk, struct notifier_block *nb)
 	clk->notifier_count++;
 
 out:
-	mutex_unlock(&prepare_lock);
+	clk_prepare_unlock();
 
 	return ret;
 }
@@ -1745,7 +1860,7 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb)
 	if (!clk || !nb)
 		return -EINVAL;
 
-	mutex_lock(&prepare_lock);
+	clk_prepare_lock();
 
 	list_for_each_entry(cn, &clk_notifier_list, node)
 		if (cn->clk == clk)
@@ -1766,7 +1881,7 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb)
 		ret = -ENOENT;
 	}
 
-	mutex_unlock(&prepare_lock);
+	clk_prepare_unlock();
 
 	return ret;
 }

drivers/clk/mvebu/clk-cpu.c

@@ -16,7 +16,6 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/delay.h>
-#include "clk-cpu.h"
 
 #define SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET    0x0
 #define SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET   0xC
@@ -173,17 +172,5 @@ clks_out:
 	kfree(cpuclk);
 }
 
-static const __initconst struct of_device_id clk_cpu_match[] = {
-	{
-		.compatible = "marvell,armada-xp-cpu-clock",
-		.data = of_cpu_clk_setup,
-	},
-	{
-		/* sentinel */
-	},
-};
-
-void __init mvebu_cpu_clk_init(void)
-{
-	of_clk_init(clk_cpu_match);
-}
+CLK_OF_DECLARE(armada_xp_cpu_clock, "marvell,armada-xp-cpu-clock",
+					 of_cpu_clk_setup);

drivers/clk/mvebu/clk-cpu.h

@@ -1,22 +0,0 @@
-/*
- * Marvell MVEBU CPU clock handling.
- *
- * Copyright (C) 2012 Marvell
- *
- * Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MVEBU_CLK_CPU_H
-#define __MVEBU_CLK_CPU_H
-
-#ifdef CONFIG_MVEBU_CLK_CPU
-void __init mvebu_cpu_clk_init(void);
-#else
-static inline void mvebu_cpu_clk_init(void) {}
-#endif
-
-#endif

drivers/clk/mvebu/clk.c

@@ -10,18 +10,14 @@
  * warranty of any kind, whether express or implied.
  */
 #include <linux/kernel.h>
-#include <linux/clk.h>
 #include <linux/clk-provider.h>
-#include <linux/of_address.h>
-#include <linux/clk/mvebu.h>
 #include <linux/of.h>
 #include "clk-core.h"
-#include "clk-cpu.h"
 #include "clk-gating-ctrl.h"
 
 void __init mvebu_clocks_init(void)
 {
 	mvebu_core_clk_init();
 	mvebu_gating_clk_init();
-	mvebu_cpu_clk_init();
+	of_clk_init(NULL);
 }

drivers/clk/mxs/clk.c

@@ -13,6 +13,7 @@
 #include <linux/io.h>
 #include <linux/jiffies.h>
 #include <linux/spinlock.h>
+#include "clk.h"
 
 DEFINE_SPINLOCK(mxs_lock);
 

drivers/clk/spear/spear1340_clock.c

@@ -960,47 +960,47 @@ void __init spear1340_clk_init(void)
 			SPEAR1340_SPDIF_IN_CLK_ENB, 0, &_lock);
 	clk_register_clkdev(clk, NULL, "d0100000.spdif-in");
 
-	clk = clk_register_gate(NULL, "acp_clk", "acp_mclk", 0,
+	clk = clk_register_gate(NULL, "acp_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0,
 			&_lock);
 	clk_register_clkdev(clk, NULL, "acp_clk");
 
-	clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mclk", 0,
+	clk = clk_register_gate(NULL, "plgpio_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0,
 			&_lock);
 	clk_register_clkdev(clk, NULL, "e2800000.gpio");
 
-	clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mclk", 0,
+	clk = clk_register_gate(NULL, "video_dec_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB,
 			0, &_lock);
 	clk_register_clkdev(clk, NULL, "video_dec");
 
-	clk = clk_register_gate(NULL, "video_enc_clk", "video_enc_mclk", 0,
+	clk = clk_register_gate(NULL, "video_enc_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_ENC_CLK_ENB,
 			0, &_lock);
 	clk_register_clkdev(clk, NULL, "video_enc");
 
-	clk = clk_register_gate(NULL, "video_in_clk", "video_in_mclk", 0,
+	clk = clk_register_gate(NULL, "video_in_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_IN_CLK_ENB, 0,
 			&_lock);
 	clk_register_clkdev(clk, NULL, "spear_vip");
 
-	clk = clk_register_gate(NULL, "cam0_clk", "cam0_mclk", 0,
+	clk = clk_register_gate(NULL, "cam0_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0,
 			&_lock);
 	clk_register_clkdev(clk, NULL, "d0200000.cam0");
 
-	clk = clk_register_gate(NULL, "cam1_clk", "cam1_mclk", 0,
+	clk = clk_register_gate(NULL, "cam1_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0,
 			&_lock);
 	clk_register_clkdev(clk, NULL, "d0300000.cam1");
 
-	clk = clk_register_gate(NULL, "cam2_clk", "cam2_mclk", 0,
+	clk = clk_register_gate(NULL, "cam2_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0,
 			&_lock);
 	clk_register_clkdev(clk, NULL, "d0400000.cam2");
 
-	clk = clk_register_gate(NULL, "cam3_clk", "cam3_mclk", 0,
+	clk = clk_register_gate(NULL, "cam3_clk", "ahb_clk", 0,
 			SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0,
 			&_lock);
 	clk_register_clkdev(clk, NULL, "d0500000.cam3");

drivers/clk/sunxi/Makefile

@@ -0,0 +1,5 @@
+#
+# Makefile for sunxi specific clk
+#
+
+obj-y += clk-sunxi.o clk-factors.o

drivers/clk/sunxi/clk-factors.c

@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2013 Emilio López <emilio@elopez.com.ar>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Adjustable factor-based clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+
+#include <linux/delay.h>
+
+#include "clk-factors.h"
+
+/*
+ * DOC: basic adjustable factor-based clock that cannot gate
+ *
+ * Traits of this clock:
+ * prepare - clk_prepare only ensures that parents are prepared
+ * enable - clk_enable only ensures that parents are enabled
+ * rate - rate is adjustable.
+ *        clk->rate = (parent->rate * N * (K + 1) >> P) / (M + 1)
+ * parent - fixed parent.  No clk_set_parent support
+ */
+
+struct clk_factors {
+	struct clk_hw hw;
+	void __iomem *reg;
+	struct clk_factors_config *config;
+	void (*get_factors) (u32 *rate, u32 parent, u8 *n, u8 *k, u8 *m, u8 *p);
+	spinlock_t *lock;
+};
+
+#define to_clk_factors(_hw) container_of(_hw, struct clk_factors, hw)
+
+#define SETMASK(len, pos)		(((-1U) >> (31-len))  << (pos))
+#define CLRMASK(len, pos)		(~(SETMASK(len, pos)))
+#define FACTOR_GET(bit, len, reg)	(((reg) & SETMASK(len, bit)) >> (bit))
+
+#define FACTOR_SET(bit, len, reg, val) \
+	(((reg) & CLRMASK(len, bit)) | (val << (bit)))
+
+static unsigned long clk_factors_recalc_rate(struct clk_hw *hw,
+					     unsigned long parent_rate)
+{
+	u8 n = 1, k = 0, p = 0, m = 0;
+	u32 reg;
+	unsigned long rate;
+	struct clk_factors *factors = to_clk_factors(hw);
+	struct clk_factors_config *config = factors->config;
+
+	/* Fetch the register value */
+	reg = readl(factors->reg);
+
+	/* Get each individual factor if applicable */
+	if (config->nwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+		n = FACTOR_GET(config->nshift, config->nwidth, reg);
+	if (config->kwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+		k = FACTOR_GET(config->kshift, config->kwidth, reg);
+	if (config->mwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+		m = FACTOR_GET(config->mshift, config->mwidth, reg);
+	if (config->pwidth != SUNXI_FACTORS_NOT_APPLICABLE)
+		p = FACTOR_GET(config->pshift, config->pwidth, reg);
+
+	/* Calculate the rate */
+	rate = (parent_rate * n * (k + 1) >> p) / (m + 1);
+
+	return rate;
+}
+
+static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long *parent_rate)
+{
+	struct clk_factors *factors = to_clk_factors(hw);
+	factors->get_factors((u32 *)&rate, (u32)*parent_rate,
+			     NULL, NULL, NULL, NULL);
+
+	return rate;
+}
+
+static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	u8 n, k, m, p;
+	u32 reg;
+	struct clk_factors *factors = to_clk_factors(hw);
+	struct clk_factors_config *config = factors->config;
+	unsigned long flags = 0;
+
+	factors->get_factors((u32 *)&rate, (u32)parent_rate, &n, &k, &m, &p);
+
+	if (factors->lock)
+		spin_lock_irqsave(factors->lock, flags);
+
+	/* Fetch the register value */
+	reg = readl(factors->reg);
+
+	/* Set up the new factors - macros do not do anything if width is 0 */
+	reg = FACTOR_SET(config->nshift, config->nwidth, reg, n);
+	reg = FACTOR_SET(config->kshift, config->kwidth, reg, k);
+	reg = FACTOR_SET(config->mshift, config->mwidth, reg, m);
+	reg = FACTOR_SET(config->pshift, config->pwidth, reg, p);
+
+	/* Apply them now */
+	writel(reg, factors->reg);
+
+	/* delay 500us so pll stabilizes */
+	__delay((rate >> 20) * 500 / 2);
+
+	if (factors->lock)
+		spin_unlock_irqrestore(factors->lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops clk_factors_ops = {
+	.recalc_rate = clk_factors_recalc_rate,
+	.round_rate = clk_factors_round_rate,
+	.set_rate = clk_factors_set_rate,
+};
+
+/**
+ * clk_register_factors - register a factors clock with
+ * the clock framework
+ * @dev: device registering this clock
+ * @name: name of this clock
+ * @parent_name: name of clock's parent
+ * @flags: framework-specific flags
+ * @reg: register address to adjust factors
+ * @config: shift and width of factors n, k, m and p
+ * @get_factors: function to calculate the factors for a given frequency
+ * @lock: shared register lock for this clock
+ */
+struct clk *clk_register_factors(struct device *dev, const char *name,
+				 const char *parent_name,
+				 unsigned long flags, void __iomem *reg,
+				 struct clk_factors_config *config,
+				 void (*get_factors)(u32 *rate, u32 parent,
+						     u8 *n, u8 *k, u8 *m, u8 *p),
+				 spinlock_t *lock)
+{
+	struct clk_factors *factors;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	/* allocate the factors */
+	factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL);
+	if (!factors) {
+		pr_err("%s: could not allocate factors clk\n", __func__);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	init.name = name;
+	init.ops = &clk_factors_ops;
+	init.flags = flags;
+	init.parent_names = (parent_name ? &parent_name : NULL);
+	init.num_parents = (parent_name ? 1 : 0);
+
+	/* struct clk_factors assignments */
+	factors->reg = reg;
+	factors->config = config;
+	factors->lock = lock;
+	factors->hw.init = &init;
+	factors->get_factors = get_factors;
+
+	/* register the clock */
+	clk = clk_register(dev, &factors->hw);
+
+	if (IS_ERR(clk))
+		kfree(factors);
+
+	return clk;
+}

drivers/clk/sunxi/clk-factors.h

@@ -0,0 +1,27 @@
+#ifndef __MACH_SUNXI_CLK_FACTORS_H
+#define __MACH_SUNXI_CLK_FACTORS_H
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+
+#define SUNXI_FACTORS_NOT_APPLICABLE	(0)
+
+struct clk_factors_config {
+	u8 nshift;
+	u8 nwidth;
+	u8 kshift;
+	u8 kwidth;
+	u8 mshift;
+	u8 mwidth;
+	u8 pshift;
+	u8 pwidth;
+};
+
+struct clk *clk_register_factors(struct device *dev, const char *name,
+				 const char *parent_name,
+				 unsigned long flags, void __iomem *reg,
+				 struct clk_factors_config *config,
+				 void (*get_factors) (u32 *rate, u32 parent_rate,
+						      u8 *n, u8 *k, u8 *m, u8 *p),
+				 spinlock_t *lock);
+#endif

drivers/clk/sunxi/clk-sunxi.c

@@ -0,0 +1,450 @@
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/clk/sunxi.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "clk-factors.h"
+
+static DEFINE_SPINLOCK(clk_lock);
+
+/**
+ * sunxi_osc_clk_setup() - Setup function for gatable oscillator
+ */
+
+#define SUNXI_OSC24M_GATE	0
+
+static void __init sunxi_osc_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	const char *clk_name = node->name;
+	const char *parent;
+	void *reg;
+
+	reg = of_iomap(node, 0);
+
+	parent = of_clk_get_parent_name(node, 0);
+
+	clk = clk_register_gate(NULL, clk_name, parent, 0, reg,
+				SUNXI_OSC24M_GATE, 0, &clk_lock);
+
+	if (clk) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		clk_register_clkdev(clk, clk_name, NULL);
+	}
+}
+
+
+
+/**
+ * sunxi_get_pll1_factors() - calculates n, k, m, p factors for PLL1
+ * PLL1 rate is calculated as follows
+ * rate = (parent_rate * n * (k + 1) >> p) / (m + 1);
+ * parent_rate is always 24Mhz
+ */
+
+static void sunxi_get_pll1_factors(u32 *freq, u32 parent_rate,
+				   u8 *n, u8 *k, u8 *m, u8 *p)
+{
+	u8 div;
+
+	/* Normalize value to a 6M multiple */
+	div = *freq / 6000000;
+	*freq = 6000000 * div;
+
+	/* we were called to round the frequency, we can now return */
+	if (n == NULL)
+		return;
+
+	/* m is always zero for pll1 */
+	*m = 0;
+
+	/* k is 1 only on these cases */
+	if (*freq >= 768000000 || *freq == 42000000 || *freq == 54000000)
+		*k = 1;
+	else
+		*k = 0;
+
+	/* p will be 3 for divs under 10 */
+	if (div < 10)
+		*p = 3;
+
+	/* p will be 2 for divs between 10 - 20 and odd divs under 32 */
+	else if (div < 20 || (div < 32 && (div & 1)))
+		*p = 2;
+
+	/* p will be 1 for even divs under 32, divs under 40 and odd pairs
+	 * of divs between 40-62 */
+	else if (div < 40 || (div < 64 && (div & 2)))
+		*p = 1;
+
+	/* any other entries have p = 0 */
+	else
+		*p = 0;
+
+	/* calculate a suitable n based on k and p */
+	div <<= *p;
+	div /= (*k + 1);
+	*n = div / 4;
+}
+
+
+
+/**
+ * sunxi_get_apb1_factors() - calculates m, p factors for APB1
+ * APB1 rate is calculated as follows
+ * rate = (parent_rate >> p) / (m + 1);
+ */
+
+static void sunxi_get_apb1_factors(u32 *freq, u32 parent_rate,
+				   u8 *n, u8 *k, u8 *m, u8 *p)
+{
+	u8 calcm, calcp;
+
+	if (parent_rate < *freq)
+		*freq = parent_rate;
+
+	parent_rate = (parent_rate + (*freq - 1)) / *freq;
+
+	/* Invalid rate! */
+	if (parent_rate > 32)
+		return;
+
+	if (parent_rate <= 4)
+		calcp = 0;
+	else if (parent_rate <= 8)
+		calcp = 1;
+	else if (parent_rate <= 16)
+		calcp = 2;
+	else
+		calcp = 3;
+
+	calcm = (parent_rate >> calcp) - 1;
+
+	*freq = (parent_rate >> calcp) / (calcm + 1);
+
+	/* we were called to round the frequency, we can now return */
+	if (n == NULL)
+		return;
+
+	*m = calcm;
+	*p = calcp;
+}
+
+
+
+/**
+ * sunxi_factors_clk_setup() - Setup function for factor clocks
+ */
+
+struct factors_data {
+	struct clk_factors_config *table;
+	void (*getter) (u32 *rate, u32 parent_rate, u8 *n, u8 *k, u8 *m, u8 *p);
+};
+
+static struct clk_factors_config pll1_config = {
+	.nshift = 8,
+	.nwidth = 5,
+	.kshift = 4,
+	.kwidth = 2,
+	.mshift = 0,
+	.mwidth = 2,
+	.pshift = 16,
+	.pwidth = 2,
+};
+
+static struct clk_factors_config apb1_config = {
+	.mshift = 0,
+	.mwidth = 5,
+	.pshift = 16,
+	.pwidth = 2,
+};
+
+static const __initconst struct factors_data pll1_data = {
+	.table = &pll1_config,
+	.getter = sunxi_get_pll1_factors,
+};
+
+static const __initconst struct factors_data apb1_data = {
+	.table = &apb1_config,
+	.getter = sunxi_get_apb1_factors,
+};
+
+static void __init sunxi_factors_clk_setup(struct device_node *node,
+					   struct factors_data *data)
+{
+	struct clk *clk;
+	const char *clk_name = node->name;
+	const char *parent;
+	void *reg;
+
+	reg = of_iomap(node, 0);
+
+	parent = of_clk_get_parent_name(node, 0);
+
+	clk = clk_register_factors(NULL, clk_name, parent, 0, reg,
+				   data->table, data->getter, &clk_lock);
+
+	if (clk) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		clk_register_clkdev(clk, clk_name, NULL);
+	}
+}
+
+
+
+/**
+ * sunxi_mux_clk_setup() - Setup function for muxes
+ */
+
+#define SUNXI_MUX_GATE_WIDTH	2
+
+struct mux_data {
+	u8 shift;
+};
+
+static const __initconst struct mux_data cpu_data = {
+	.shift = 16,
+};
+
+static const __initconst struct mux_data apb1_mux_data = {
+	.shift = 24,
+};
+
+static void __init sunxi_mux_clk_setup(struct device_node *node,
+				       struct mux_data *data)
+{
+	struct clk *clk;
+	const char *clk_name = node->name;
+	const char *parents[5];
+	void *reg;
+	int i = 0;
+
+	reg = of_iomap(node, 0);
+
+	while (i < 5 && (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
+		i++;
+
+	clk = clk_register_mux(NULL, clk_name, parents, i, 0, reg,
+			       data->shift, SUNXI_MUX_GATE_WIDTH,
+			       0, &clk_lock);
+
+	if (clk) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		clk_register_clkdev(clk, clk_name, NULL);
+	}
+}
+
+
+
+/**
+ * sunxi_divider_clk_setup() - Setup function for simple divider clocks
+ */
+
+#define SUNXI_DIVISOR_WIDTH	2
+
+struct div_data {
+	u8 shift;
+	u8 pow;
+};
+
+static const __initconst struct div_data axi_data = {
+	.shift = 0,
+	.pow = 0,
+};
+
+static const __initconst struct div_data ahb_data = {
+	.shift = 4,
+	.pow = 1,
+};
+
+static const __initconst struct div_data apb0_data = {
+	.shift = 8,
+	.pow = 1,
+};
+
+static void __init sunxi_divider_clk_setup(struct device_node *node,
+					   struct div_data *data)
+{
+	struct clk *clk;
+	const char *clk_name = node->name;
+	const char *clk_parent;
+	void *reg;
+
+	reg = of_iomap(node, 0);
+
+	clk_parent = of_clk_get_parent_name(node, 0);
+
+	clk = clk_register_divider(NULL, clk_name, clk_parent, 0,
+				   reg, data->shift, SUNXI_DIVISOR_WIDTH,
+				   data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0,
+				   &clk_lock);
+	if (clk) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		clk_register_clkdev(clk, clk_name, NULL);
+	}
+}
+
+
+
+/**
+ * sunxi_gates_clk_setup() - Setup function for leaf gates on clocks
+ */
+
+#define SUNXI_GATES_MAX_SIZE	64
+
+struct gates_data {
+	DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE);
+};
+
+static const __initconst struct gates_data axi_gates_data = {
+	.mask = {1},
+};
+
+static const __initconst struct gates_data ahb_gates_data = {
+	.mask = {0x7F77FFF, 0x14FB3F},
+};
+
+static const __initconst struct gates_data apb0_gates_data = {
+	.mask = {0x4EF},
+};
+
+static const __initconst struct gates_data apb1_gates_data = {
+	.mask = {0xFF00F7},
+};
+
+static void __init sunxi_gates_clk_setup(struct device_node *node,
+					 struct gates_data *data)
+{
+	struct clk_onecell_data *clk_data;
+	const char *clk_parent;
+	const char *clk_name;
+	void *reg;
+	int qty;
+	int i = 0;
+	int j = 0;
+	int ignore;
+
+	reg = of_iomap(node, 0);
+
+	clk_parent = of_clk_get_parent_name(node, 0);
+
+	/* Worst-case size approximation and memory allocation */
+	qty = find_last_bit(data->mask, SUNXI_GATES_MAX_SIZE);
+	clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL);
+	if (!clk_data)
+		return;
+	clk_data->clks = kzalloc((qty+1) * sizeof(struct clk *), GFP_KERNEL);
+	if (!clk_data->clks) {
+		kfree(clk_data);
+		return;
+	}
+
+	for_each_set_bit(i, data->mask, SUNXI_GATES_MAX_SIZE) {
+		of_property_read_string_index(node, "clock-output-names",
+					      j, &clk_name);
+
+		/* No driver claims this clock, but it should remain gated */
+		ignore = !strcmp("ahb_sdram", clk_name) ? CLK_IGNORE_UNUSED : 0;
+
+		clk_data->clks[i] = clk_register_gate(NULL, clk_name,
+						      clk_parent, ignore,
+						      reg + 4 * (i/32), i % 32,
+						      0, &clk_lock);
+		WARN_ON(IS_ERR(clk_data->clks[i]));
+
+		j++;
+	}
+
+	/* Adjust to the real max */
+	clk_data->clk_num = i;
+
+	of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+}
+
+/* Matches for of_clk_init */
+static const __initconst struct of_device_id clk_match[] = {
+	{.compatible = "fixed-clock", .data = of_fixed_clk_setup,},
+	{.compatible = "allwinner,sun4i-osc-clk", .data = sunxi_osc_clk_setup,},
+	{}
+};
+
+/* Matches for factors clocks */
+static const __initconst struct of_device_id clk_factors_match[] = {
+	{.compatible = "allwinner,sun4i-pll1-clk", .data = &pll1_data,},
+	{.compatible = "allwinner,sun4i-apb1-clk", .data = &apb1_data,},
+	{}
+};
+
+/* Matches for divider clocks */
+static const __initconst struct of_device_id clk_div_match[] = {
+	{.compatible = "allwinner,sun4i-axi-clk", .data = &axi_data,},
+	{.compatible = "allwinner,sun4i-ahb-clk", .data = &ahb_data,},
+	{.compatible = "allwinner,sun4i-apb0-clk", .data = &apb0_data,},
+	{}
+};
+
+/* Matches for mux clocks */
+static const __initconst struct of_device_id clk_mux_match[] = {
+	{.compatible = "allwinner,sun4i-cpu-clk", .data = &cpu_data,},
+	{.compatible = "allwinner,sun4i-apb1-mux-clk", .data = &apb1_mux_data,},
+	{}
+};
+
+/* Matches for gate clocks */
+static const __initconst struct of_device_id clk_gates_match[] = {
+	{.compatible = "allwinner,sun4i-axi-gates-clk", .data = &axi_gates_data,},
+	{.compatible = "allwinner,sun4i-ahb-gates-clk", .data = &ahb_gates_data,},
+	{.compatible = "allwinner,sun4i-apb0-gates-clk", .data = &apb0_gates_data,},
+	{.compatible = "allwinner,sun4i-apb1-gates-clk", .data = &apb1_gates_data,},
+	{}
+};
+
+static void __init of_sunxi_table_clock_setup(const struct of_device_id *clk_match,
+					      void *function)
+{
+	struct device_node *np;
+	const struct div_data *data;
+	const struct of_device_id *match;
+	void (*setup_function)(struct device_node *, const void *) = function;
+
+	for_each_matching_node(np, clk_match) {
+		match = of_match_node(clk_match, np);
+		data = match->data;
+		setup_function(np, data);
+	}
+}
+
+void __init sunxi_init_clocks(void)
+{
+	/* Register all the simple sunxi clocks on DT */
+	of_clk_init(clk_match);
+
+	/* Register factor clocks */
+	of_sunxi_table_clock_setup(clk_factors_match, sunxi_factors_clk_setup);
+
+	/* Register divider clocks */
+	of_sunxi_table_clock_setup(clk_div_match, sunxi_divider_clk_setup);
+
+	/* Register mux clocks */
+	of_sunxi_table_clock_setup(clk_mux_match, sunxi_mux_clk_setup);
+
+	/* Register gate clocks */
+	of_sunxi_table_clock_setup(clk_gates_match, sunxi_gates_clk_setup);
+}

drivers/clk/tegra/clk.h

@@ -355,15 +355,16 @@ struct clk *tegra_clk_register_periph_nodiv(const char *name,
 		struct tegra_clk_periph *periph, void __iomem *clk_base,
 		u32 offset);
 
-#define TEGRA_CLK_PERIPH(_mux_shift, _mux_width, _mux_flags,		\
+#define TEGRA_CLK_PERIPH(_mux_shift, _mux_mask, _mux_flags,		\
 			 _div_shift, _div_width, _div_frac_width,	\
 			 _div_flags, _clk_num, _enb_refcnt, _regs,	\
-			 _gate_flags)					\
+			 _gate_flags, _table)				\
 	{								\
 		.mux = {						\
 			.flags = _mux_flags,				\
 			.shift = _mux_shift,				\
-			.width = _mux_width,				\
+			.mask = _mux_mask,				\
+			.table = _table,				\
 		},							\
 		.divider = {						\
 			.flags = _div_flags,				\
@@ -393,26 +394,36 @@ struct tegra_periph_init_data {
 	const char *dev_id;
 };
 
-#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset, \
-			_mux_shift, _mux_width, _mux_flags, _div_shift,	\
+#define TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\
+			_mux_shift, _mux_mask, _mux_flags, _div_shift,	\
 			_div_width, _div_frac_width, _div_flags, _regs,	\
-			_clk_num, _enb_refcnt, _gate_flags, _clk_id)	\
+			_clk_num, _enb_refcnt, _gate_flags, _clk_id, _table) \
 	{								\
 		.name = _name,						\
 		.clk_id = _clk_id,					\
 		.parent_names = _parent_names,				\
 		.num_parents = ARRAY_SIZE(_parent_names),		\
-		.periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_width,	\
+		.periph = TEGRA_CLK_PERIPH(_mux_shift, _mux_mask,	\
 					   _mux_flags, _div_shift,	\
 					   _div_width, _div_frac_width,	\
 					   _div_flags, _clk_num,	\
 					   _enb_refcnt, _regs,		\
-					   _gate_flags),		\
+					   _gate_flags, _table),	\
 		.offset = _offset,					\
 		.con_id = _con_id,					\
 		.dev_id = _dev_id,					\
 	}
 
+#define TEGRA_INIT_DATA(_name, _con_id, _dev_id, _parent_names, _offset,\
+			_mux_shift, _mux_width, _mux_flags, _div_shift,	\
+			_div_width, _div_frac_width, _div_flags, _regs,	\
+			_clk_num, _enb_refcnt, _gate_flags, _clk_id)	\
+	TEGRA_INIT_DATA_TABLE(_name, _con_id, _dev_id, _parent_names, _offset,\
+			_mux_shift, BIT(_mux_width) - 1, _mux_flags,	\
+			_div_shift, _div_width, _div_frac_width, _div_flags, \
+			_regs, _clk_num, _enb_refcnt, _gate_flags, _clk_id,\
+			NULL)
+
 /**
  * struct clk_super_mux - super clock
  *

drivers/clk/ux500/clk-prcmu.c

@@ -20,15 +20,23 @@
 struct clk_prcmu {
 	struct clk_hw hw;
 	u8 cg_sel;
+	int is_prepared;
 	int is_enabled;
+	int opp_requested;
 };
 
 /* PRCMU clock operations. */
 
 static int clk_prcmu_prepare(struct clk_hw *hw)
 {
+	int ret;
 	struct clk_prcmu *clk = to_clk_prcmu(hw);
-	return prcmu_request_clock(clk->cg_sel, true);
+
+	ret = prcmu_request_clock(clk->cg_sel, true);
+	if (!ret)
+		clk->is_prepared = 1;
+
+	return ret;;
 }
 
 static void clk_prcmu_unprepare(struct clk_hw *hw)
@@ -36,7 +44,15 @@ static void clk_prcmu_unprepare(struct clk_hw *hw)
 	struct clk_prcmu *clk = to_clk_prcmu(hw);
 	if (prcmu_request_clock(clk->cg_sel, false))
 		pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
-			hw->init->name);
+			__clk_get_name(hw->clk));
+	else
+		clk->is_prepared = 0;
+}
+
+static int clk_prcmu_is_prepared(struct clk_hw *hw)
+{
+	struct clk_prcmu *clk = to_clk_prcmu(hw);
+	return clk->is_prepared;
 }
 
 static int clk_prcmu_enable(struct clk_hw *hw)
@@ -79,58 +95,52 @@ static int clk_prcmu_set_rate(struct clk_hw *hw, unsigned long rate,
 	return prcmu_set_clock_rate(clk->cg_sel, rate);
 }
 
-static int request_ape_opp100(bool enable)
-{
-	static int reqs;
-	int err = 0;
-
-	if (enable) {
-		if (!reqs)
-			err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP,
-							"clock", 100);
-		if (!err)
-			reqs++;
-	} else {
-		reqs--;
-		if (!reqs)
-			prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
-						"clock");
-	}
-	return err;
-}
-
 static int clk_prcmu_opp_prepare(struct clk_hw *hw)
 {
 	int err;
 	struct clk_prcmu *clk = to_clk_prcmu(hw);
 
-	err = request_ape_opp100(true);
-	if (err) {
-		pr_err("clk_prcmu: %s failed to request APE OPP100 for %s.\n",
-			__func__, hw->init->name);
-		return err;
+	if (!clk->opp_requested) {
+		err = prcmu_qos_add_requirement(PRCMU_QOS_APE_OPP,
+						(char *)__clk_get_name(hw->clk),
+						100);
+		if (err) {
+			pr_err("clk_prcmu: %s fail req APE OPP for %s.\n",
+				__func__, __clk_get_name(hw->clk));
+			return err;
+		}
+		clk->opp_requested = 1;
 	}
 
 	err = prcmu_request_clock(clk->cg_sel, true);
-	if (err)
-		request_ape_opp100(false);
+	if (err) {
+		prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
+					(char *)__clk_get_name(hw->clk));
+		clk->opp_requested = 0;
+		return err;
+	}
 
-	return err;
+	clk->is_prepared = 1;
+	return 0;
 }
 
 static void clk_prcmu_opp_unprepare(struct clk_hw *hw)
 {
 	struct clk_prcmu *clk = to_clk_prcmu(hw);
 
-	if (prcmu_request_clock(clk->cg_sel, false))
-		goto out_error;
-	if (request_ape_opp100(false))
-		goto out_error;
-	return;
+	if (prcmu_request_clock(clk->cg_sel, false)) {
+		pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+			__clk_get_name(hw->clk));
+		return;
+	}
 
-out_error:
-	pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
-		hw->init->name);
+	if (clk->opp_requested) {
+		prcmu_qos_remove_requirement(PRCMU_QOS_APE_OPP,
+					(char *)__clk_get_name(hw->clk));
+		clk->opp_requested = 0;
+	}
+
+	clk->is_prepared = 0;
 }
 
 static int clk_prcmu_opp_volt_prepare(struct clk_hw *hw)
@@ -138,38 +148,49 @@ static int clk_prcmu_opp_volt_prepare(struct clk_hw *hw)
 	int err;
 	struct clk_prcmu *clk = to_clk_prcmu(hw);
 
-	err = prcmu_request_ape_opp_100_voltage(true);
-	if (err) {
-		pr_err("clk_prcmu: %s failed to request APE OPP VOLT for %s.\n",
-			__func__, hw->init->name);
-		return err;
+	if (!clk->opp_requested) {
+		err = prcmu_request_ape_opp_100_voltage(true);
+		if (err) {
+			pr_err("clk_prcmu: %s fail req APE OPP VOLT for %s.\n",
+				__func__, __clk_get_name(hw->clk));
+			return err;
+		}
+		clk->opp_requested = 1;
 	}
 
 	err = prcmu_request_clock(clk->cg_sel, true);
-	if (err)
+	if (err) {
 		prcmu_request_ape_opp_100_voltage(false);
+		clk->opp_requested = 0;
+		return err;
+	}
 
-	return err;
+	clk->is_prepared = 1;
+	return 0;
 }
 
 static void clk_prcmu_opp_volt_unprepare(struct clk_hw *hw)
 {
 	struct clk_prcmu *clk = to_clk_prcmu(hw);
 
-	if (prcmu_request_clock(clk->cg_sel, false))
-		goto out_error;
-	if (prcmu_request_ape_opp_100_voltage(false))
-		goto out_error;
-	return;
+	if (prcmu_request_clock(clk->cg_sel, false)) {
+		pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
+			__clk_get_name(hw->clk));
+		return;
+	}
 
-out_error:
-	pr_err("clk_prcmu: %s failed to disable %s.\n", __func__,
-		hw->init->name);
+	if (clk->opp_requested) {
+		prcmu_request_ape_opp_100_voltage(false);
+		clk->opp_requested = 0;
+	}
+
+	clk->is_prepared = 0;
 }
 
 static struct clk_ops clk_prcmu_scalable_ops = {
 	.prepare = clk_prcmu_prepare,
 	.unprepare = clk_prcmu_unprepare,
+	.is_prepared = clk_prcmu_is_prepared,
 	.enable = clk_prcmu_enable,
 	.disable = clk_prcmu_disable,
 	.is_enabled = clk_prcmu_is_enabled,
@@ -181,6 +202,7 @@ static struct clk_ops clk_prcmu_scalable_ops = {
 static struct clk_ops clk_prcmu_gate_ops = {
 	.prepare = clk_prcmu_prepare,
 	.unprepare = clk_prcmu_unprepare,
+	.is_prepared = clk_prcmu_is_prepared,
 	.enable = clk_prcmu_enable,
 	.disable = clk_prcmu_disable,
 	.is_enabled = clk_prcmu_is_enabled,
@@ -202,6 +224,7 @@ static struct clk_ops clk_prcmu_rate_ops = {
 static struct clk_ops clk_prcmu_opp_gate_ops = {
 	.prepare = clk_prcmu_opp_prepare,
 	.unprepare = clk_prcmu_opp_unprepare,
+	.is_prepared = clk_prcmu_is_prepared,
 	.enable = clk_prcmu_enable,
 	.disable = clk_prcmu_disable,
 	.is_enabled = clk_prcmu_is_enabled,
@@ -211,6 +234,7 @@ static struct clk_ops clk_prcmu_opp_gate_ops = {
 static struct clk_ops clk_prcmu_opp_volt_scalable_ops = {
 	.prepare = clk_prcmu_opp_volt_prepare,
 	.unprepare = clk_prcmu_opp_volt_unprepare,
+	.is_prepared = clk_prcmu_is_prepared,
 	.enable = clk_prcmu_enable,
 	.disable = clk_prcmu_disable,
 	.is_enabled = clk_prcmu_is_enabled,
@@ -242,7 +266,9 @@ static struct clk *clk_reg_prcmu(const char *name,
 	}
 
 	clk->cg_sel = cg_sel;
+	clk->is_prepared = 1;
 	clk->is_enabled = 1;
+	clk->opp_requested = 0;
 	/* "rate" can be used for changing the initial frequency */
 	if (rate)
 		prcmu_set_clock_rate(cg_sel, rate);

drivers/clocksource/sunxi_timer.c

@@ -23,7 +23,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/sunxi_timer.h>
-#include <linux/clk-provider.h>
+#include <linux/clk/sunxi.h>
 
 #define TIMER_CTL_REG		0x00
 #define TIMER_CTL_ENABLE		(1 << 0)
@@ -123,7 +123,7 @@ void __init sunxi_timer_init(void)
 	if (irq <= 0)
 		panic("Can't parse IRQ");
 
-	of_clk_init(NULL);
+	sunxi_init_clocks();
 
 	clk = of_clk_get(node, 0);
 	if (IS_ERR(clk))

include/linux/clk-private.h

@@ -152,7 +152,7 @@ struct clk {
 		},						\
 		.reg = _reg,					\
 		.shift = _shift,				\
-		.width = _width,				\
+		.mask = BIT(_width) - 1,			\
 		.flags = _mux_flags,				\
 		.lock = _lock,					\
 	};							\

include/linux/clk-provider.h

@@ -45,6 +45,14 @@ struct clk_hw;
  * 		undo any work done in the @prepare callback. Called with
  * 		prepare_lock held.
  *
+ * @is_prepared: Queries the hardware to determine if the clock is prepared.
+ *		This function is allowed to sleep. Optional, if this op is not
+ *		set then the prepare count will be used.
+ *
+ * @unprepare_unused: Unprepare the clock atomically.  Only called from
+ *		clk_disable_unused for prepare clocks with special needs.
+ *		Called with prepare mutex held. This function may sleep.
+ *
  * @enable:	Enable the clock atomically. This must not return until the
  * 		clock is generating a valid clock signal, usable by consumer
  * 		devices. Called with enable_lock held. This function must not
@@ -108,6 +116,8 @@ struct clk_hw;
 struct clk_ops {
 	int		(*prepare)(struct clk_hw *hw);
 	void		(*unprepare)(struct clk_hw *hw);
+	int		(*is_prepared)(struct clk_hw *hw);
+	void		(*unprepare_unused)(struct clk_hw *hw);
 	int		(*enable)(struct clk_hw *hw);
 	void		(*disable)(struct clk_hw *hw);
 	int		(*is_enabled)(struct clk_hw *hw);
@@ -239,9 +249,14 @@ struct clk_div_table {
  * CLK_DIVIDER_ONE_BASED - by default the divisor is the value read from the
  * 	register plus one.  If CLK_DIVIDER_ONE_BASED is set then the divider is
  * 	the raw value read from the register, with the value of zero considered
- * 	invalid
+ *	invalid, unless CLK_DIVIDER_ALLOW_ZERO is set.
  * CLK_DIVIDER_POWER_OF_TWO - clock divisor is 2 raised to the value read from
  * 	the hardware register
+ * CLK_DIVIDER_ALLOW_ZERO - Allow zero divisors.  For dividers which have
+ *	CLK_DIVIDER_ONE_BASED set, it is possible to end up with a zero divisor.
+ *	Some hardware implementations gracefully handle this case and allow a
+ *	zero divisor by not modifying their input clock
+ *	(divide by one / bypass).
  */
 struct clk_divider {
 	struct clk_hw	hw;
@@ -255,6 +270,7 @@ struct clk_divider {
 
 #define CLK_DIVIDER_ONE_BASED		BIT(0)
 #define CLK_DIVIDER_POWER_OF_TWO	BIT(1)
+#define CLK_DIVIDER_ALLOW_ZERO		BIT(2)
 
 extern const struct clk_ops clk_divider_ops;
 struct clk *clk_register_divider(struct device *dev, const char *name,
@@ -274,7 +290,7 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name,
  * @reg:	register controlling multiplexer
  * @shift:	shift to multiplexer bit field
  * @width:	width of mutliplexer bit field
- * @num_clks:	number of parent clocks
+ * @flags:	hardware-specific flags
  * @lock:	register lock
  *
  * Clock with multiple selectable parents.  Implements .get_parent, .set_parent
@@ -287,8 +303,9 @@ struct clk *clk_register_divider_table(struct device *dev, const char *name,
 struct clk_mux {
 	struct clk_hw	hw;
 	void __iomem	*reg;
+	u32		*table;
+	u32		mask;
 	u8		shift;
-	u8		width;
 	u8		flags;
 	spinlock_t	*lock;
 };
@@ -297,11 +314,17 @@ struct clk_mux {
 #define CLK_MUX_INDEX_BIT		BIT(1)
 
 extern const struct clk_ops clk_mux_ops;
+
 struct clk *clk_register_mux(struct device *dev, const char *name,
 		const char **parent_names, u8 num_parents, unsigned long flags,
 		void __iomem *reg, u8 shift, u8 width,
 		u8 clk_mux_flags, spinlock_t *lock);
 
+struct clk *clk_register_mux_table(struct device *dev, const char *name,
+		const char **parent_names, u8 num_parents, unsigned long flags,
+		void __iomem *reg, u8 shift, u32 mask,
+		u8 clk_mux_flags, u32 *table, spinlock_t *lock);
+
 /**
  * struct clk_fixed_factor - fixed multiplier and divider clock
  *
@@ -325,6 +348,37 @@ struct clk *clk_register_fixed_factor(struct device *dev, const char *name,
 		const char *parent_name, unsigned long flags,
 		unsigned int mult, unsigned int div);
 
+/***
+ * struct clk_composite - aggregate clock of mux, divider and gate clocks
+ *
+ * @hw:		handle between common and hardware-specific interfaces
+ * @mux_hw:	handle between composite and hardware-specifix mux clock
+ * @div_hw:	handle between composite and hardware-specifix divider clock
+ * @gate_hw:	handle between composite and hardware-specifix gate clock
+ * @mux_ops:	clock ops for mux
+ * @div_ops:	clock ops for divider
+ * @gate_ops:	clock ops for gate
+ */
+struct clk_composite {
+	struct clk_hw	hw;
+	struct clk_ops	ops;
+
+	struct clk_hw	*mux_hw;
+	struct clk_hw	*div_hw;
+	struct clk_hw	*gate_hw;
+
+	const struct clk_ops	*mux_ops;
+	const struct clk_ops	*div_ops;
+	const struct clk_ops	*gate_ops;
+};
+
+struct clk *clk_register_composite(struct device *dev, const char *name,
+		const char **parent_names, int num_parents,
+		struct clk_hw *mux_hw, const struct clk_ops *mux_ops,
+		struct clk_hw *div_hw, const struct clk_ops *div_ops,
+		struct clk_hw *gate_hw, const struct clk_ops *gate_ops,
+		unsigned long flags);
+
 /**
  * clk_register - allocate a new clock, register it and return an opaque cookie
  * @dev: device that is registering this clock
@@ -351,6 +405,7 @@ unsigned int __clk_get_enable_count(struct clk *clk);
 unsigned int __clk_get_prepare_count(struct clk *clk);
 unsigned long __clk_get_rate(struct clk *clk);
 unsigned long __clk_get_flags(struct clk *clk);
+bool __clk_is_prepared(struct clk *clk);
 bool __clk_is_enabled(struct clk *clk);
 struct clk *__clk_lookup(const char *name);
 

include/linux/clk/sunxi.h

@@ -0,0 +1,22 @@
+/*
+ * Copyright 2012 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_CLK_SUNXI_H_
+#define __LINUX_CLK_SUNXI_H_
+
+void __init sunxi_init_clocks(void);
+
+#endif