gpio: lp873x: Add support for General Purpose Outputs
Add driver for lp873x PMIC family GPOs. Two GPOs are supported and can be configured in Open-drain output or Push-pull output. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>hifive-unleashed-5.1
Keerthy
Lee Jones
parent
dc21c7ad3a
commit
83f141030c
|
|
@ -874,6 +874,16 @@ config GPIO_LP3943
|
|||
LP3943 can be used as a GPIO expander which provides up to 16 GPIOs.
|
||||
Open drain outputs are required for this usage.
|
||||
|
||||
config GPIO_LP873X
|
||||
tristate "TI LP873X GPO"
|
||||
depends on MFD_TI_LP873X
|
||||
help
|
||||
This driver supports the GPO on TI Lp873x PMICs. 2 GPOs are present
|
||||
on LP873X PMICs.
|
||||
|
||||
This driver can also be built as a module. If so, the module will be
|
||||
called gpio-lp873x.
|
||||
|
||||
config GPIO_MAX77620
|
||||
tristate "GPIO support for PMIC MAX77620 and MAX20024"
|
||||
depends on MFD_MAX77620
|
||||
|
|
|
|||
|
|
@ -56,6 +56,7 @@ obj-$(CONFIG_GPIO_LOONGSON) += gpio-loongson.o
|
|||
obj-$(CONFIG_GPIO_LP3943) += gpio-lp3943.o
|
||||
obj-$(CONFIG_GPIO_LPC18XX) += gpio-lpc18xx.o
|
||||
obj-$(CONFIG_ARCH_LPC32XX) += gpio-lpc32xx.o
|
||||
obj-$(CONFIG_GPIO_LP873X) += gpio-lp873x.o
|
||||
obj-$(CONFIG_GPIO_LYNXPOINT) += gpio-lynxpoint.o
|
||||
obj-$(CONFIG_GPIO_MAX730X) += gpio-max730x.o
|
||||
obj-$(CONFIG_GPIO_MAX7300) += gpio-max7300.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,193 @@
|
|||
/*
|
||||
* Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
|
||||
* Keerthy <j-keerthy@ti.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
||||
* kind, whether expressed or implied; without even the implied warranty
|
||||
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License version 2 for more details.
|
||||
*
|
||||
* Based on the TPS65218 driver
|
||||
*/
|
||||
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regmap.h>
|
||||
|
||||
#include <linux/mfd/lp873x.h>
|
||||
|
||||
#define BITS_PER_GPO 0x4
|
||||
#define LP873X_GPO_CTRL_OD 0x2
|
||||
|
||||
struct lp873x_gpio {
|
||||
struct gpio_chip chip;
|
||||
struct lp873x *lp873;
|
||||
};
|
||||
|
||||
static int lp873x_gpio_get_direction(struct gpio_chip *chip,
|
||||
unsigned int offset)
|
||||
{
|
||||
/* This device is output only */
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int lp873x_gpio_direction_input(struct gpio_chip *chip,
|
||||
unsigned int offset)
|
||||
{
|
||||
/* This device is output only */
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int lp873x_gpio_direction_output(struct gpio_chip *chip,
|
||||
unsigned int offset, int value)
|
||||
{
|
||||
struct lp873x_gpio *gpio = gpiochip_get_data(chip);
|
||||
|
||||
/* Set the initial value */
|
||||
return regmap_update_bits(gpio->lp873->regmap, LP873X_REG_GPO_CTRL,
|
||||
BIT(offset * BITS_PER_GPO),
|
||||
value ? BIT(offset * BITS_PER_GPO) : 0);
|
||||
}
|
||||
|
||||
static int lp873x_gpio_get(struct gpio_chip *chip, unsigned int offset)
|
||||
{
|
||||
struct lp873x_gpio *gpio = gpiochip_get_data(chip);
|
||||
int ret, val;
|
||||
|
||||
ret = regmap_read(gpio->lp873->regmap, LP873X_REG_GPO_CTRL, &val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
return val & BIT(offset * BITS_PER_GPO);
|
||||
}
|
||||
|
||||
static void lp873x_gpio_set(struct gpio_chip *chip, unsigned int offset,
|
||||
int value)
|
||||
{
|
||||
struct lp873x_gpio *gpio = gpiochip_get_data(chip);
|
||||
|
||||
regmap_update_bits(gpio->lp873->regmap, LP873X_REG_GPO_CTRL,
|
||||
BIT(offset * BITS_PER_GPO),
|
||||
value ? BIT(offset * BITS_PER_GPO) : 0);
|
||||
}
|
||||
|
||||
static int lp873x_gpio_request(struct gpio_chip *gc, unsigned int offset)
|
||||
{
|
||||
struct lp873x_gpio *gpio = gpiochip_get_data(gc);
|
||||
int ret;
|
||||
|
||||
switch (offset) {
|
||||
case 0:
|
||||
/* No MUX Set up Needed for GPO */
|
||||
break;
|
||||
case 1:
|
||||
/* Setup the CLKIN_PIN_SEL MUX to GPO2 */
|
||||
ret = regmap_update_bits(gpio->lp873->regmap, LP873X_REG_CONFIG,
|
||||
LP873X_CONFIG_CLKIN_PIN_SEL, 0);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int lp873x_gpio_set_single_ended(struct gpio_chip *gc,
|
||||
unsigned int offset,
|
||||
enum single_ended_mode mode)
|
||||
{
|
||||
struct lp873x_gpio *gpio = gpiochip_get_data(gc);
|
||||
|
||||
switch (mode) {
|
||||
case LINE_MODE_OPEN_DRAIN:
|
||||
return regmap_update_bits(gpio->lp873->regmap,
|
||||
LP873X_REG_GPO_CTRL,
|
||||
BIT(offset * BITS_PER_GPO +
|
||||
LP873X_GPO_CTRL_OD),
|
||||
BIT(offset * BITS_PER_GPO +
|
||||
LP873X_GPO_CTRL_OD));
|
||||
case LINE_MODE_PUSH_PULL:
|
||||
return regmap_update_bits(gpio->lp873->regmap,
|
||||
LP873X_REG_GPO_CTRL,
|
||||
BIT(offset * BITS_PER_GPO +
|
||||
LP873X_GPO_CTRL_OD), 0);
|
||||
default:
|
||||
return -ENOTSUPP;
|
||||
}
|
||||
}
|
||||
|
||||
static struct gpio_chip template_chip = {
|
||||
.label = "lp873x-gpio",
|
||||
.owner = THIS_MODULE,
|
||||
.request = lp873x_gpio_request,
|
||||
.get_direction = lp873x_gpio_get_direction,
|
||||
.direction_input = lp873x_gpio_direction_input,
|
||||
.direction_output = lp873x_gpio_direction_output,
|
||||
.get = lp873x_gpio_get,
|
||||
.set = lp873x_gpio_set,
|
||||
.set_single_ended = lp873x_gpio_set_single_ended,
|
||||
.base = -1,
|
||||
.ngpio = 2,
|
||||
.can_sleep = true,
|
||||
};
|
||||
|
||||
static int lp873x_gpio_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct lp873x_gpio *gpio;
|
||||
int ret;
|
||||
|
||||
gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
|
||||
if (!gpio)
|
||||
return -ENOMEM;
|
||||
|
||||
platform_set_drvdata(pdev, gpio);
|
||||
|
||||
gpio->lp873 = dev_get_drvdata(pdev->dev.parent);
|
||||
gpio->chip = template_chip;
|
||||
gpio->chip.parent = gpio->lp873->dev;
|
||||
|
||||
ret = gpiochip_add_data(&gpio->chip, gpio);
|
||||
if (ret < 0) {
|
||||
dev_err(&pdev->dev, "Could not register gpiochip, %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int lp873x_gpio_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct lp873x_gpio *gpio = platform_get_drvdata(pdev);
|
||||
|
||||
gpiochip_remove(&gpio->chip);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct platform_device_id lp873x_gpio_id_table[] = {
|
||||
{ "lp873x-gpio", },
|
||||
{ /* sentinel */ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(platform, lp873x_gpio_id_table);
|
||||
|
||||
static struct platform_driver lp873x_gpio_driver = {
|
||||
.driver = {
|
||||
.name = "lp873x-gpio",
|
||||
},
|
||||
.probe = lp873x_gpio_probe,
|
||||
.remove = lp873x_gpio_remove,
|
||||
.id_table = lp873x_gpio_id_table,
|
||||
};
|
||||
module_platform_driver(lp873x_gpio_driver);
|
||||
|
||||
MODULE_AUTHOR("Keerthy <j-keerthy@ti.com>");
|
||||
MODULE_DESCRIPTION("LP873X GPIO driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue