redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

serial: 8250_pci: Implement MSI(-X) support 

There may be setups, where legacy interrupts are not available. This is
the caese, e.g., when Linux runs as guest (aka. non-root cell) of the
partitioning hypervisor Jailhouse. There, only MSI(-X) interrupts are
available for guests.

But the 8250_pci driver currently only supports legacy ints. So let's
enable MSI(-X) interrupts.

Nevertheless, this needs to handled with care: while many 8250 devices
actually claim to support MSI(-X) interrupts it should not be enabled be
default. I had at least one device in my hands with broken MSI
implementation.

So better introduce a whitelist with devices that are known to support
MSI(-X) interrupts. I tested all devices mentioned in the patch.

Signed-off-by: Ralf Ramsauer <ralf.ramsauer@oth-regensburg.de>
Link: https://lore.kernel.org/r/20190812112152.693622-1-ralf.ramsauer@oth-regensburg.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
alistair/sunxi64-5.4-dsi
Ralf Ramsauer 2019-08-12 13:21:52 +02:00 committed by Greg Kroah-Hartman
parent 68e26a8d22
commit 8428413b1d
1 changed files with 26 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
drivers/tty/serial/8250/8250_pci.c
View File

@ -58,6 +58,16 @@ struct serial_private {
int line[0];
};
static const struct pci_device_id pci_use_msi[] = {
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9900,
0xA000, 0x1000) },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9912,
0xA000, 0x1000) },
{ PCI_DEVICE_SUB(PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9922,
0xA000, 0x1000) },
{ }
};
static int pci_default_setup(struct serial_private*,
const struct pciserial_board*, struct uart_8250_port *, int);
@ -4155,7 +4165,22 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
memset(&uart, 0, sizeof(uart));
uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ;
uart.port.uartclk = board->base_baud * 16;
uart.port.irq = get_pci_irq(dev, board);
if (pci_match_id(pci_use_msi, dev)) {
dev_dbg(&dev->dev, "Using MSI(-X) interrupts\n");
pci_set_master(dev);
rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_ALL_TYPES);
} else {
dev_dbg(&dev->dev, "Using legacy interrupts\n");
rc = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY);
}
if (rc < 0) {
kfree(priv);
priv = ERR_PTR(rc);
goto err_deinit;
}
uart.port.irq = pci_irq_vector(dev, 0);
uart.port.dev = &dev->dev;
for (i = 0; i < nr_ports; i++) {