Merge branches 'ib-mfd-iio-input-5.7' and 'ib-mfd-iio-rtc-5.7' into ibs-for-mfd-merged
This commit is contained in:
commit
873357b1a7
|
@ -15,6 +15,8 @@ Required properties:
|
|||
- reg: the I2C slave address of the device
|
||||
|
||||
Optional properties:
|
||||
- interrupts: interrupt mapping for IRQ
|
||||
See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
|
||||
- system-power-controller:
|
||||
See Documentation/devicetree/bindings/power/power-controller.txt
|
||||
|
||||
|
@ -32,6 +34,8 @@ Example:
|
|||
pmic@32 {
|
||||
compatible = "ricoh,rn5t618";
|
||||
reg = <0x32>;
|
||||
interrupt-parent = <&gpio5>;
|
||||
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
|
||||
system-power-controller;
|
||||
|
||||
regulators {
|
||||
|
|
|
@ -783,6 +783,16 @@ config RCAR_GYRO_ADC
|
|||
To compile this driver as a module, choose M here: the
|
||||
module will be called rcar-gyroadc.
|
||||
|
||||
config RN5T618_ADC
|
||||
tristate "ADC for the RN5T618/RC5T619 family of chips"
|
||||
depends on MFD_RN5T618
|
||||
help
|
||||
Say yes here to build support for the integrated ADC inside the
|
||||
RN5T618/619 series PMICs:
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called rn5t618-adc.
|
||||
|
||||
config ROCKCHIP_SARADC
|
||||
tristate "Rockchip SARADC driver"
|
||||
depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST)
|
||||
|
|
|
@ -74,6 +74,7 @@ obj-$(CONFIG_QCOM_VADC_COMMON) += qcom-vadc-common.o
|
|||
obj-$(CONFIG_QCOM_SPMI_VADC) += qcom-spmi-vadc.o
|
||||
obj-$(CONFIG_QCOM_PM8XXX_XOADC) += qcom-pm8xxx-xoadc.o
|
||||
obj-$(CONFIG_RCAR_GYRO_ADC) += rcar-gyroadc.o
|
||||
obj-$(CONFIG_RN5T618_ADC) += rn5t618-adc.o
|
||||
obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
|
||||
obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o
|
||||
obj-$(CONFIG_SPEAR_ADC) += spear_adc.o
|
||||
|
|
256
drivers/iio/adc/rn5t618-adc.c
Normal file
256
drivers/iio/adc/rn5t618-adc.c
Normal file
|
@ -0,0 +1,256 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* ADC driver for the RICOH RN5T618 power management chip family
|
||||
*
|
||||
* Copyright (C) 2019 Andreas Kemnade
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/mfd/rn5t618.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/completion.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/iio/iio.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#define RN5T618_ADC_CONVERSION_TIMEOUT (msecs_to_jiffies(500))
|
||||
#define RN5T618_REFERENCE_VOLT 2500
|
||||
|
||||
/* mask for selecting channels for single conversion */
|
||||
#define RN5T618_ADCCNT3_CHANNEL_MASK 0x7
|
||||
/* average 4-time conversion mode */
|
||||
#define RN5T618_ADCCNT3_AVG BIT(3)
|
||||
/* set for starting a single conversion, gets cleared by hw when done */
|
||||
#define RN5T618_ADCCNT3_GODONE BIT(4)
|
||||
/* automatic conversion, period is in ADCCNT2, selected channels are
|
||||
* in ADCCNT1
|
||||
*/
|
||||
#define RN5T618_ADCCNT3_AUTO BIT(5)
|
||||
#define RN5T618_ADCEND_IRQ BIT(0)
|
||||
|
||||
struct rn5t618_adc_data {
|
||||
struct device *dev;
|
||||
struct rn5t618 *rn5t618;
|
||||
struct completion conv_completion;
|
||||
int irq;
|
||||
};
|
||||
|
||||
struct rn5t618_channel_ratios {
|
||||
u16 numerator;
|
||||
u16 denominator;
|
||||
};
|
||||
|
||||
enum rn5t618_channels {
|
||||
LIMMON = 0,
|
||||
VBAT,
|
||||
VADP,
|
||||
VUSB,
|
||||
VSYS,
|
||||
VTHM,
|
||||
AIN1,
|
||||
AIN0
|
||||
};
|
||||
|
||||
static const struct rn5t618_channel_ratios rn5t618_ratios[8] = {
|
||||
[LIMMON] = {50, 32}, /* measured across 20mOhm, amplified by 32 */
|
||||
[VBAT] = {2, 1},
|
||||
[VADP] = {3, 1},
|
||||
[VUSB] = {3, 1},
|
||||
[VSYS] = {3, 1},
|
||||
[VTHM] = {1, 1},
|
||||
[AIN1] = {1, 1},
|
||||
[AIN0] = {1, 1},
|
||||
};
|
||||
|
||||
static int rn5t618_read_adc_reg(struct rn5t618 *rn5t618, int reg, u16 *val)
|
||||
{
|
||||
u8 data[2];
|
||||
int ret;
|
||||
|
||||
ret = regmap_bulk_read(rn5t618->regmap, reg, data, sizeof(data));
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
*val = (data[0] << 4) | (data[1] & 0xF);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static irqreturn_t rn5t618_adc_irq(int irq, void *data)
|
||||
{
|
||||
struct rn5t618_adc_data *adc = data;
|
||||
unsigned int r = 0;
|
||||
int ret;
|
||||
|
||||
/* clear low & high threshold irqs */
|
||||
regmap_write(adc->rn5t618->regmap, RN5T618_IR_ADC1, 0);
|
||||
regmap_write(adc->rn5t618->regmap, RN5T618_IR_ADC2, 0);
|
||||
|
||||
ret = regmap_read(adc->rn5t618->regmap, RN5T618_IR_ADC3, &r);
|
||||
if (ret < 0)
|
||||
dev_err(adc->dev, "failed to read IRQ status: %d\n", ret);
|
||||
|
||||
regmap_write(adc->rn5t618->regmap, RN5T618_IR_ADC3, 0);
|
||||
|
||||
if (r & RN5T618_ADCEND_IRQ)
|
||||
complete(&adc->conv_completion);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int rn5t618_adc_read(struct iio_dev *iio_dev,
|
||||
const struct iio_chan_spec *chan,
|
||||
int *val, int *val2, long mask)
|
||||
{
|
||||
struct rn5t618_adc_data *adc = iio_priv(iio_dev);
|
||||
u16 raw;
|
||||
int ret;
|
||||
|
||||
if (mask == IIO_CHAN_INFO_SCALE) {
|
||||
*val = RN5T618_REFERENCE_VOLT *
|
||||
rn5t618_ratios[chan->channel].numerator;
|
||||
*val2 = rn5t618_ratios[chan->channel].denominator * 4095;
|
||||
|
||||
return IIO_VAL_FRACTIONAL;
|
||||
}
|
||||
|
||||
/* select channel */
|
||||
ret = regmap_update_bits(adc->rn5t618->regmap, RN5T618_ADCCNT3,
|
||||
RN5T618_ADCCNT3_CHANNEL_MASK,
|
||||
chan->channel);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = regmap_write(adc->rn5t618->regmap, RN5T618_EN_ADCIR3,
|
||||
RN5T618_ADCEND_IRQ);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = regmap_update_bits(adc->rn5t618->regmap, RN5T618_ADCCNT3,
|
||||
RN5T618_ADCCNT3_AVG,
|
||||
mask == IIO_CHAN_INFO_AVERAGE_RAW ?
|
||||
RN5T618_ADCCNT3_AVG : 0);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
init_completion(&adc->conv_completion);
|
||||
/* single conversion */
|
||||
ret = regmap_update_bits(adc->rn5t618->regmap, RN5T618_ADCCNT3,
|
||||
RN5T618_ADCCNT3_GODONE,
|
||||
RN5T618_ADCCNT3_GODONE);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = wait_for_completion_timeout(&adc->conv_completion,
|
||||
RN5T618_ADC_CONVERSION_TIMEOUT);
|
||||
if (ret == 0) {
|
||||
dev_warn(adc->dev, "timeout waiting for adc result\n");
|
||||
return -ETIMEDOUT;
|
||||
}
|
||||
|
||||
ret = rn5t618_read_adc_reg(adc->rn5t618,
|
||||
RN5T618_ILIMDATAH + 2 * chan->channel,
|
||||
&raw);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
*val = raw;
|
||||
|
||||
return IIO_VAL_INT;
|
||||
}
|
||||
|
||||
static const struct iio_info rn5t618_adc_iio_info = {
|
||||
.read_raw = &rn5t618_adc_read,
|
||||
};
|
||||
|
||||
#define RN5T618_ADC_CHANNEL(_channel, _type, _name) { \
|
||||
.type = _type, \
|
||||
.channel = _channel, \
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
|
||||
BIT(IIO_CHAN_INFO_AVERAGE_RAW) | \
|
||||
BIT(IIO_CHAN_INFO_SCALE), \
|
||||
.datasheet_name = _name, \
|
||||
.indexed = 1. \
|
||||
}
|
||||
|
||||
static const struct iio_chan_spec rn5t618_adc_iio_channels[] = {
|
||||
RN5T618_ADC_CHANNEL(LIMMON, IIO_CURRENT, "LIMMON"),
|
||||
RN5T618_ADC_CHANNEL(VBAT, IIO_VOLTAGE, "VBAT"),
|
||||
RN5T618_ADC_CHANNEL(VADP, IIO_VOLTAGE, "VADP"),
|
||||
RN5T618_ADC_CHANNEL(VUSB, IIO_VOLTAGE, "VUSB"),
|
||||
RN5T618_ADC_CHANNEL(VSYS, IIO_VOLTAGE, "VSYS"),
|
||||
RN5T618_ADC_CHANNEL(VTHM, IIO_VOLTAGE, "VTHM"),
|
||||
RN5T618_ADC_CHANNEL(AIN1, IIO_VOLTAGE, "AIN1"),
|
||||
RN5T618_ADC_CHANNEL(AIN0, IIO_VOLTAGE, "AIN0")
|
||||
};
|
||||
|
||||
static int rn5t618_adc_probe(struct platform_device *pdev)
|
||||
{
|
||||
int ret;
|
||||
struct iio_dev *iio_dev;
|
||||
struct rn5t618_adc_data *adc;
|
||||
struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
|
||||
|
||||
iio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc));
|
||||
if (!iio_dev) {
|
||||
dev_err(&pdev->dev, "failed allocating iio device\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
adc = iio_priv(iio_dev);
|
||||
adc->dev = &pdev->dev;
|
||||
adc->rn5t618 = rn5t618;
|
||||
|
||||
if (rn5t618->irq_data)
|
||||
adc->irq = regmap_irq_get_virq(rn5t618->irq_data,
|
||||
RN5T618_IRQ_ADC);
|
||||
|
||||
if (adc->irq <= 0) {
|
||||
dev_err(&pdev->dev, "get virq failed\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
init_completion(&adc->conv_completion);
|
||||
|
||||
iio_dev->name = dev_name(&pdev->dev);
|
||||
iio_dev->dev.parent = &pdev->dev;
|
||||
iio_dev->info = &rn5t618_adc_iio_info;
|
||||
iio_dev->modes = INDIO_DIRECT_MODE;
|
||||
iio_dev->channels = rn5t618_adc_iio_channels;
|
||||
iio_dev->num_channels = ARRAY_SIZE(rn5t618_adc_iio_channels);
|
||||
|
||||
/* stop any auto-conversion */
|
||||
ret = regmap_write(rn5t618->regmap, RN5T618_ADCCNT3, 0);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
platform_set_drvdata(pdev, iio_dev);
|
||||
|
||||
ret = devm_request_threaded_irq(adc->dev, adc->irq, NULL,
|
||||
rn5t618_adc_irq,
|
||||
IRQF_ONESHOT, dev_name(adc->dev),
|
||||
adc);
|
||||
if (ret < 0) {
|
||||
dev_err(adc->dev, "request irq %d failed: %d\n", adc->irq, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return devm_iio_device_register(adc->dev, iio_dev);
|
||||
}
|
||||
|
||||
static struct platform_driver rn5t618_adc_driver = {
|
||||
.driver = {
|
||||
.name = "rn5t618-adc",
|
||||
},
|
||||
.probe = rn5t618_adc_probe,
|
||||
};
|
||||
|
||||
module_platform_driver(rn5t618_adc_driver);
|
||||
MODULE_ALIAS("platform:rn5t618-adc");
|
||||
MODULE_DESCRIPTION("RICOH RN5T618 ADC driver");
|
||||
MODULE_LICENSE("GPL");
|
|
@ -1071,6 +1071,7 @@ config MFD_RN5T618
|
|||
depends on OF
|
||||
select MFD_CORE
|
||||
select REGMAP_I2C
|
||||
select REGMAP_IRQ
|
||||
help
|
||||
Say yes here to add support for the Ricoh RN5T567,
|
||||
RN5T618, RC5T619 PMIC.
|
||||
|
|
|
@ -8,10 +8,13 @@
|
|||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/mfd/core.h>
|
||||
#include <linux/mfd/rn5t618.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/reboot.h>
|
||||
#include <linux/regmap.h>
|
||||
|
||||
|
@ -20,6 +23,13 @@ static const struct mfd_cell rn5t618_cells[] = {
|
|||
{ .name = "rn5t618-wdt" },
|
||||
};
|
||||
|
||||
static const struct mfd_cell rc5t619_cells[] = {
|
||||
{ .name = "rn5t618-adc" },
|
||||
{ .name = "rn5t618-regulator" },
|
||||
{ .name = "rc5t619-rtc" },
|
||||
{ .name = "rn5t618-wdt" },
|
||||
};
|
||||
|
||||
static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
|
||||
{
|
||||
switch (reg) {
|
||||
|
@ -32,6 +42,8 @@ static bool rn5t618_volatile_reg(struct device *dev, unsigned int reg)
|
|||
case RN5T618_IR_GPF:
|
||||
case RN5T618_MON_IOIN:
|
||||
case RN5T618_INTMON:
|
||||
case RN5T618_RTC_CTRL1 ... RN5T618_RTC_CTRL2:
|
||||
case RN5T618_RTC_SECONDS ... RN5T618_RTC_YEAR:
|
||||
return true;
|
||||
default:
|
||||
return false;
|
||||
|
@ -46,9 +58,56 @@ static const struct regmap_config rn5t618_regmap_config = {
|
|||
.cache_type = REGCACHE_RBTREE,
|
||||
};
|
||||
|
||||
static const struct regmap_irq rc5t619_irqs[] = {
|
||||
REGMAP_IRQ_REG(RN5T618_IRQ_SYS, 0, BIT(0)),
|
||||
REGMAP_IRQ_REG(RN5T618_IRQ_DCDC, 0, BIT(1)),
|
||||
REGMAP_IRQ_REG(RN5T618_IRQ_RTC, 0, BIT(2)),
|
||||
REGMAP_IRQ_REG(RN5T618_IRQ_ADC, 0, BIT(3)),
|
||||
REGMAP_IRQ_REG(RN5T618_IRQ_GPIO, 0, BIT(4)),
|
||||
REGMAP_IRQ_REG(RN5T618_IRQ_CHG, 0, BIT(6)),
|
||||
};
|
||||
|
||||
static const struct regmap_irq_chip rc5t619_irq_chip = {
|
||||
.name = "rc5t619",
|
||||
.irqs = rc5t619_irqs,
|
||||
.num_irqs = ARRAY_SIZE(rc5t619_irqs),
|
||||
.num_regs = 1,
|
||||
.status_base = RN5T618_INTMON,
|
||||
.mask_base = RN5T618_INTEN,
|
||||
.mask_invert = true,
|
||||
};
|
||||
|
||||
static struct rn5t618 *rn5t618_pm_power_off;
|
||||
static struct notifier_block rn5t618_restart_handler;
|
||||
|
||||
static int rn5t618_irq_init(struct rn5t618 *rn5t618)
|
||||
{
|
||||
const struct regmap_irq_chip *irq_chip = NULL;
|
||||
int ret;
|
||||
|
||||
if (!rn5t618->irq)
|
||||
return 0;
|
||||
|
||||
switch (rn5t618->variant) {
|
||||
case RC5T619:
|
||||
irq_chip = &rc5t619_irq_chip;
|
||||
break;
|
||||
default:
|
||||
dev_err(rn5t618->dev, "Currently no IRQ support for variant %d\n",
|
||||
(int)rn5t618->variant);
|
||||
return -ENOENT;
|
||||
}
|
||||
|
||||
ret = devm_regmap_add_irq_chip(rn5t618->dev, rn5t618->regmap,
|
||||
rn5t618->irq,
|
||||
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
|
||||
0, irq_chip, &rn5t618->irq_data);
|
||||
if (ret)
|
||||
dev_err(rn5t618->dev, "Failed to register IRQ chip\n");
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static void rn5t618_trigger_poweroff_sequence(bool repower)
|
||||
{
|
||||
/* disable automatic repower-on */
|
||||
|
@ -87,8 +146,7 @@ static const struct of_device_id rn5t618_of_match[] = {
|
|||
};
|
||||
MODULE_DEVICE_TABLE(of, rn5t618_of_match);
|
||||
|
||||
static int rn5t618_i2c_probe(struct i2c_client *i2c,
|
||||
const struct i2c_device_id *id)
|
||||
static int rn5t618_i2c_probe(struct i2c_client *i2c)
|
||||
{
|
||||
const struct of_device_id *of_id;
|
||||
struct rn5t618 *priv;
|
||||
|
@ -106,6 +164,8 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
|
|||
|
||||
i2c_set_clientdata(i2c, priv);
|
||||
priv->variant = (long)of_id->data;
|
||||
priv->irq = i2c->irq;
|
||||
priv->dev = &i2c->dev;
|
||||
|
||||
priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
|
||||
if (IS_ERR(priv->regmap)) {
|
||||
|
@ -114,8 +174,16 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
|
|||
return ret;
|
||||
}
|
||||
|
||||
ret = devm_mfd_add_devices(&i2c->dev, -1, rn5t618_cells,
|
||||
ARRAY_SIZE(rn5t618_cells), NULL, 0, NULL);
|
||||
if (priv->variant == RC5T619)
|
||||
ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
|
||||
rc5t619_cells,
|
||||
ARRAY_SIZE(rc5t619_cells),
|
||||
NULL, 0, NULL);
|
||||
else
|
||||
ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_NONE,
|
||||
rn5t618_cells,
|
||||
ARRAY_SIZE(rn5t618_cells),
|
||||
NULL, 0, NULL);
|
||||
if (ret) {
|
||||
dev_err(&i2c->dev, "failed to add sub-devices: %d\n", ret);
|
||||
return ret;
|
||||
|
@ -138,7 +206,7 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
|
|||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
return rn5t618_irq_init(priv);
|
||||
}
|
||||
|
||||
static int rn5t618_i2c_remove(struct i2c_client *i2c)
|
||||
|
@ -155,19 +223,38 @@ static int rn5t618_i2c_remove(struct i2c_client *i2c)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id rn5t618_i2c_id[] = {
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, rn5t618_i2c_id);
|
||||
static int __maybe_unused rn5t618_i2c_suspend(struct device *dev)
|
||||
{
|
||||
struct rn5t618 *priv = dev_get_drvdata(dev);
|
||||
|
||||
if (priv->irq)
|
||||
disable_irq(priv->irq);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int __maybe_unused rn5t618_i2c_resume(struct device *dev)
|
||||
{
|
||||
struct rn5t618 *priv = dev_get_drvdata(dev);
|
||||
|
||||
if (priv->irq)
|
||||
enable_irq(priv->irq);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(rn5t618_i2c_dev_pm_ops,
|
||||
rn5t618_i2c_suspend,
|
||||
rn5t618_i2c_resume);
|
||||
|
||||
static struct i2c_driver rn5t618_i2c_driver = {
|
||||
.driver = {
|
||||
.name = "rn5t618",
|
||||
.of_match_table = of_match_ptr(rn5t618_of_match),
|
||||
.pm = &rn5t618_i2c_dev_pm_ops,
|
||||
},
|
||||
.probe = rn5t618_i2c_probe,
|
||||
.probe_new = rn5t618_i2c_probe,
|
||||
.remove = rn5t618_i2c_remove,
|
||||
.id_table = rn5t618_i2c_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(rn5t618_i2c_driver);
|
||||
|
|
|
@ -591,6 +591,16 @@ config RTC_DRV_RC5T583
|
|||
This driver can also be built as a module. If so, the module
|
||||
will be called rtc-rc5t583.
|
||||
|
||||
config RTC_DRV_RC5T619
|
||||
tristate "RICOH RC5T619 RTC driver"
|
||||
depends on MFD_RN5T618
|
||||
help
|
||||
If you say yes here you get support for the RTC on the
|
||||
RICOH RC5T619 chips.
|
||||
|
||||
This driver can also be built as a module. If so, the module
|
||||
will be called rtc-rc5t619.
|
||||
|
||||
config RTC_DRV_S35390A
|
||||
tristate "Seiko Instruments S-35390A"
|
||||
select BITREVERSE
|
||||
|
|
|
@ -137,6 +137,7 @@ obj-$(CONFIG_RTC_DRV_PXA) += rtc-pxa.o
|
|||
obj-$(CONFIG_RTC_DRV_R7301) += rtc-r7301.o
|
||||
obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o
|
||||
obj-$(CONFIG_RTC_DRV_RC5T583) += rtc-rc5t583.o
|
||||
obj-$(CONFIG_RTC_DRV_RC5T619) += rtc-rc5t619.o
|
||||
obj-$(CONFIG_RTC_DRV_RK808) += rtc-rk808.o
|
||||
obj-$(CONFIG_RTC_DRV_RP5C01) += rtc-rp5c01.o
|
||||
obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o
|
||||
|
|
444
drivers/rtc/rtc-rc5t619.c
Normal file
444
drivers/rtc/rtc-rc5t619.c
Normal file
|
@ -0,0 +1,444 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* drivers/rtc/rtc-rc5t619.c
|
||||
*
|
||||
* Real time clock driver for RICOH RC5T619 power management chip.
|
||||
*
|
||||
* Copyright (C) 2019 Andreas Kemnade
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/mfd/rn5t618.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/bcd.h>
|
||||
#include <linux/rtc.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/irqdomain.h>
|
||||
|
||||
struct rc5t619_rtc {
|
||||
int irq;
|
||||
struct rtc_device *rtc;
|
||||
struct rn5t618 *rn5t618;
|
||||
};
|
||||
|
||||
#define CTRL1_ALARM_ENABLED 0x40
|
||||
#define CTRL1_24HR 0x20
|
||||
#define CTRL1_PERIODIC_MASK 0xf
|
||||
|
||||
#define CTRL2_PON 0x10
|
||||
#define CTRL2_ALARM_STATUS 0x80
|
||||
#define CTRL2_CTFG 0x4
|
||||
#define CTRL2_CTC 0x1
|
||||
|
||||
#define MONTH_CENTFLAG 0x80
|
||||
#define HOUR_PMFLAG 0x20
|
||||
#define MDAY_DAL_EXT 0x80
|
||||
|
||||
static uint8_t rtc5t619_12hour_bcd2bin(uint8_t hour)
|
||||
{
|
||||
if (hour & HOUR_PMFLAG) {
|
||||
hour = bcd2bin(hour & ~HOUR_PMFLAG);
|
||||
return hour == 12 ? 12 : 12 + hour;
|
||||
}
|
||||
|
||||
hour = bcd2bin(hour);
|
||||
return hour == 12 ? 0 : hour;
|
||||
}
|
||||
|
||||
static uint8_t rtc5t619_12hour_bin2bcd(uint8_t hour)
|
||||
{
|
||||
if (!hour)
|
||||
return 0x12;
|
||||
|
||||
if (hour < 12)
|
||||
return bin2bcd(hour);
|
||||
|
||||
if (hour == 12)
|
||||
return 0x12 | HOUR_PMFLAG;
|
||||
|
||||
return bin2bcd(hour - 12) | HOUR_PMFLAG;
|
||||
}
|
||||
|
||||
static int rc5t619_rtc_periodic_disable(struct device *dev)
|
||||
{
|
||||
struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
|
||||
int err;
|
||||
|
||||
/* disable function */
|
||||
err = regmap_update_bits(rtc->rn5t618->regmap,
|
||||
RN5T618_RTC_CTRL1, CTRL1_PERIODIC_MASK, 0);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
/* clear alarm flag and CTFG */
|
||||
err = regmap_update_bits(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2,
|
||||
CTRL2_ALARM_STATUS | CTRL2_CTFG | CTRL2_CTC,
|
||||
0);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* things to be done once after power on */
|
||||
static int rc5t619_rtc_pon_setup(struct device *dev)
|
||||
{
|
||||
struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
|
||||
int err;
|
||||
unsigned int reg_data;
|
||||
|
||||
err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, ®_data);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
/* clear VDET PON */
|
||||
reg_data &= ~(CTRL2_PON | CTRL2_CTC | 0x4a); /* 0101-1011 */
|
||||
reg_data |= 0x20; /* 0010-0000 */
|
||||
err = regmap_write(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, reg_data);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
/* clearing RTC Adjust register */
|
||||
err = regmap_write(rtc->rn5t618->regmap, RN5T618_RTC_ADJUST, 0);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
return regmap_update_bits(rtc->rn5t618->regmap,
|
||||
RN5T618_RTC_CTRL1,
|
||||
CTRL1_24HR, CTRL1_24HR);
|
||||
}
|
||||
|
||||
static int rc5t619_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
||||
{
|
||||
struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
|
||||
u8 buff[7];
|
||||
int err;
|
||||
int cent_flag;
|
||||
unsigned int ctrl1;
|
||||
unsigned int ctrl2;
|
||||
|
||||
err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &ctrl2);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
if (ctrl2 & CTRL2_PON)
|
||||
return -EINVAL;
|
||||
|
||||
err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
err = regmap_bulk_read(rtc->rn5t618->regmap, RN5T618_RTC_SECONDS,
|
||||
buff, sizeof(buff));
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
if (buff[5] & MONTH_CENTFLAG)
|
||||
cent_flag = 1;
|
||||
else
|
||||
cent_flag = 0;
|
||||
|
||||
tm->tm_sec = bcd2bin(buff[0]);
|
||||
tm->tm_min = bcd2bin(buff[1]);
|
||||
|
||||
if (ctrl1 & CTRL1_24HR)
|
||||
tm->tm_hour = bcd2bin(buff[2]);
|
||||
else
|
||||
tm->tm_hour = rtc5t619_12hour_bcd2bin(buff[2]);
|
||||
|
||||
tm->tm_wday = bcd2bin(buff[3]);
|
||||
tm->tm_mday = bcd2bin(buff[4]);
|
||||
tm->tm_mon = bcd2bin(buff[5] & 0x1f) - 1; /* back to system 0-11 */
|
||||
tm->tm_year = bcd2bin(buff[6]) + 100 * cent_flag;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rc5t619_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
||||
{
|
||||
struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
|
||||
u8 buff[7];
|
||||
int err;
|
||||
int cent_flag;
|
||||
unsigned int ctrl1;
|
||||
unsigned int ctrl2;
|
||||
|
||||
err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &ctrl2);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
if (ctrl2 & CTRL2_PON)
|
||||
rc5t619_rtc_pon_setup(dev);
|
||||
|
||||
err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
if (tm->tm_year >= 100)
|
||||
cent_flag = 1;
|
||||
else
|
||||
cent_flag = 0;
|
||||
|
||||
buff[0] = bin2bcd(tm->tm_sec);
|
||||
buff[1] = bin2bcd(tm->tm_min);
|
||||
|
||||
if (ctrl1 & CTRL1_24HR)
|
||||
buff[2] = bin2bcd(tm->tm_hour);
|
||||
else
|
||||
buff[2] = rtc5t619_12hour_bin2bcd(tm->tm_hour);
|
||||
|
||||
buff[3] = bin2bcd(tm->tm_wday);
|
||||
buff[4] = bin2bcd(tm->tm_mday);
|
||||
buff[5] = bin2bcd(tm->tm_mon + 1); /* system set 0-11 */
|
||||
buff[6] = bin2bcd(tm->tm_year - cent_flag * 100);
|
||||
|
||||
if (cent_flag)
|
||||
buff[5] |= MONTH_CENTFLAG;
|
||||
|
||||
err = regmap_bulk_write(rtc->rn5t618->regmap, RN5T618_RTC_SECONDS,
|
||||
buff, sizeof(buff));
|
||||
if (err < 0) {
|
||||
dev_err(dev, "failed to program new time: %d\n", err);
|
||||
return err;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* 0-disable, 1-enable */
|
||||
static int rc5t619_rtc_alarm_enable(struct device *dev, unsigned int enabled)
|
||||
{
|
||||
struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
|
||||
|
||||
return regmap_update_bits(rtc->rn5t618->regmap,
|
||||
RN5T618_RTC_CTRL1,
|
||||
CTRL1_ALARM_ENABLED,
|
||||
enabled ? CTRL1_ALARM_ENABLED : 0);
|
||||
}
|
||||
|
||||
static int rc5t619_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
||||
{
|
||||
struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
|
||||
u8 buff[6];
|
||||
unsigned int buff_cent;
|
||||
int err;
|
||||
int cent_flag;
|
||||
unsigned int ctrl1;
|
||||
|
||||
err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_MONTH, &buff_cent);
|
||||
if (err < 0) {
|
||||
dev_err(dev, "failed to read time: %d\n", err);
|
||||
return err;
|
||||
}
|
||||
|
||||
if (buff_cent & MONTH_CENTFLAG)
|
||||
cent_flag = 1;
|
||||
else
|
||||
cent_flag = 0;
|
||||
|
||||
err = regmap_bulk_read(rtc->rn5t618->regmap, RN5T618_RTC_ALARM_Y_SEC,
|
||||
buff, sizeof(buff));
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
buff[3] = buff[3] & 0x3f;
|
||||
|
||||
alrm->time.tm_sec = bcd2bin(buff[0]);
|
||||
alrm->time.tm_min = bcd2bin(buff[1]);
|
||||
|
||||
if (ctrl1 & CTRL1_24HR)
|
||||
alrm->time.tm_hour = bcd2bin(buff[2]);
|
||||
else
|
||||
alrm->time.tm_hour = rtc5t619_12hour_bcd2bin(buff[2]);
|
||||
|
||||
alrm->time.tm_mday = bcd2bin(buff[3]);
|
||||
alrm->time.tm_mon = bcd2bin(buff[4]) - 1;
|
||||
alrm->time.tm_year = bcd2bin(buff[5]) + 100 * cent_flag;
|
||||
alrm->enabled = !!(ctrl1 & CTRL1_ALARM_ENABLED);
|
||||
dev_dbg(dev, "read alarm: %ptR\n", &alrm->time);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int rc5t619_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
||||
{
|
||||
struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
|
||||
u8 buff[6];
|
||||
int err;
|
||||
int cent_flag;
|
||||
unsigned int ctrl1;
|
||||
|
||||
err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL1, &ctrl1);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
err = rc5t619_rtc_alarm_enable(dev, 0);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
if (rtc->irq == -1)
|
||||
return -EINVAL;
|
||||
|
||||
if (alrm->enabled == 0)
|
||||
return 0;
|
||||
|
||||
if (alrm->time.tm_year >= 100)
|
||||
cent_flag = 1;
|
||||
else
|
||||
cent_flag = 0;
|
||||
|
||||
alrm->time.tm_mon += 1;
|
||||
buff[0] = bin2bcd(alrm->time.tm_sec);
|
||||
buff[1] = bin2bcd(alrm->time.tm_min);
|
||||
|
||||
if (ctrl1 & CTRL1_24HR)
|
||||
buff[2] = bin2bcd(alrm->time.tm_hour);
|
||||
else
|
||||
buff[2] = rtc5t619_12hour_bin2bcd(alrm->time.tm_hour);
|
||||
|
||||
buff[3] = bin2bcd(alrm->time.tm_mday);
|
||||
buff[4] = bin2bcd(alrm->time.tm_mon);
|
||||
buff[5] = bin2bcd(alrm->time.tm_year - 100 * cent_flag);
|
||||
buff[3] |= MDAY_DAL_EXT;
|
||||
|
||||
err = regmap_bulk_write(rtc->rn5t618->regmap, RN5T618_RTC_ALARM_Y_SEC,
|
||||
buff, sizeof(buff));
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
return rc5t619_rtc_alarm_enable(dev, alrm->enabled);
|
||||
}
|
||||
|
||||
static const struct rtc_class_ops rc5t619_rtc_ops = {
|
||||
.read_time = rc5t619_rtc_read_time,
|
||||
.set_time = rc5t619_rtc_set_time,
|
||||
.set_alarm = rc5t619_rtc_set_alarm,
|
||||
.read_alarm = rc5t619_rtc_read_alarm,
|
||||
.alarm_irq_enable = rc5t619_rtc_alarm_enable,
|
||||
};
|
||||
|
||||
static int rc5t619_rtc_alarm_flag_clr(struct device *dev)
|
||||
{
|
||||
struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
|
||||
|
||||
/* clear alarm-D status bits.*/
|
||||
return regmap_update_bits(rtc->rn5t618->regmap,
|
||||
RN5T618_RTC_CTRL2,
|
||||
CTRL2_ALARM_STATUS | CTRL2_CTC, 0);
|
||||
}
|
||||
|
||||
static irqreturn_t rc5t619_rtc_irq(int irq, void *data)
|
||||
{
|
||||
struct device *dev = data;
|
||||
struct rc5t619_rtc *rtc = dev_get_drvdata(dev);
|
||||
|
||||
rc5t619_rtc_alarm_flag_clr(dev);
|
||||
|
||||
rtc_update_irq(rtc->rtc, 1, RTC_IRQF | RTC_AF);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int rc5t619_rtc_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
|
||||
struct rc5t619_rtc *rtc;
|
||||
unsigned int ctrl2;
|
||||
int err;
|
||||
|
||||
rtc = devm_kzalloc(dev, sizeof(*rtc), GFP_KERNEL);
|
||||
if (IS_ERR(rtc)) {
|
||||
err = PTR_ERR(rtc);
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
rtc->rn5t618 = rn5t618;
|
||||
|
||||
dev_set_drvdata(dev, rtc);
|
||||
rtc->irq = -1;
|
||||
|
||||
if (rn5t618->irq_data)
|
||||
rtc->irq = regmap_irq_get_virq(rn5t618->irq_data,
|
||||
RN5T618_IRQ_RTC);
|
||||
|
||||
if (rtc->irq < 0)
|
||||
rtc->irq = -1;
|
||||
|
||||
err = regmap_read(rtc->rn5t618->regmap, RN5T618_RTC_CTRL2, &ctrl2);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
/* disable rtc periodic function */
|
||||
err = rc5t619_rtc_periodic_disable(&pdev->dev);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
if (ctrl2 & CTRL2_PON) {
|
||||
err = rc5t619_rtc_alarm_flag_clr(&pdev->dev);
|
||||
if (err)
|
||||
return err;
|
||||
}
|
||||
|
||||
rtc->rtc = devm_rtc_allocate_device(&pdev->dev);
|
||||
if (IS_ERR(rtc->rtc)) {
|
||||
err = PTR_ERR(rtc->rtc);
|
||||
dev_err(dev, "RTC device register: err %d\n", err);
|
||||
return err;
|
||||
}
|
||||
|
||||
rtc->rtc->ops = &rc5t619_rtc_ops;
|
||||
rtc->rtc->range_min = RTC_TIMESTAMP_BEGIN_1900;
|
||||
rtc->rtc->range_max = RTC_TIMESTAMP_END_2099;
|
||||
|
||||
/* set interrupt and enable it */
|
||||
if (rtc->irq != -1) {
|
||||
err = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL,
|
||||
rc5t619_rtc_irq,
|
||||
IRQF_ONESHOT,
|
||||
"rtc-rc5t619",
|
||||
&pdev->dev);
|
||||
if (err < 0) {
|
||||
dev_err(&pdev->dev, "request IRQ:%d fail\n", rtc->irq);
|
||||
rtc->irq = -1;
|
||||
|
||||
err = rc5t619_rtc_alarm_enable(&pdev->dev, 0);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
} else {
|
||||
/* enable wake */
|
||||
device_init_wakeup(&pdev->dev, 1);
|
||||
enable_irq_wake(rtc->irq);
|
||||
}
|
||||
} else {
|
||||
/* system don't want to using alarm interrupt, so close it */
|
||||
err = rc5t619_rtc_alarm_enable(&pdev->dev, 0);
|
||||
if (err)
|
||||
return err;
|
||||
|
||||
dev_warn(&pdev->dev, "rc5t619 interrupt is disabled\n");
|
||||
}
|
||||
|
||||
return rtc_register_device(rtc->rtc);
|
||||
}
|
||||
|
||||
static struct platform_driver rc5t619_rtc_driver = {
|
||||
.driver = {
|
||||
.name = "rc5t619-rtc",
|
||||
},
|
||||
.probe = rc5t619_rtc_probe,
|
||||
};
|
||||
|
||||
module_platform_driver(rc5t619_rtc_driver);
|
||||
MODULE_ALIAS("platform:rc5t619-rtc");
|
||||
MODULE_DESCRIPTION("RICOH RC5T619 RTC driver");
|
||||
MODULE_LICENSE("GPL");
|
|
@ -139,6 +139,17 @@
|
|||
#define RN5T618_INTPOL 0x9c
|
||||
#define RN5T618_INTEN 0x9d
|
||||
#define RN5T618_INTMON 0x9e
|
||||
|
||||
#define RN5T618_RTC_SECONDS 0xA0
|
||||
#define RN5T618_RTC_MDAY 0xA4
|
||||
#define RN5T618_RTC_MONTH 0xA5
|
||||
#define RN5T618_RTC_YEAR 0xA6
|
||||
#define RN5T618_RTC_ADJUST 0xA7
|
||||
#define RN5T618_RTC_ALARM_Y_SEC 0xA8
|
||||
#define RN5T618_RTC_DAL_MONTH 0xAC
|
||||
#define RN5T618_RTC_CTRL1 0xAE
|
||||
#define RN5T618_RTC_CTRL2 0xAF
|
||||
|
||||
#define RN5T618_PREVINDAC 0xb0
|
||||
#define RN5T618_BATDAC 0xb1
|
||||
#define RN5T618_CHGCTL1 0xb3
|
||||
|
@ -242,9 +253,24 @@ enum {
|
|||
RC5T619,
|
||||
};
|
||||
|
||||
/* RN5T618 IRQ definitions */
|
||||
enum {
|
||||
RN5T618_IRQ_SYS = 0,
|
||||
RN5T618_IRQ_DCDC,
|
||||
RN5T618_IRQ_RTC,
|
||||
RN5T618_IRQ_ADC,
|
||||
RN5T618_IRQ_GPIO,
|
||||
RN5T618_IRQ_CHG,
|
||||
RN5T618_NR_IRQS,
|
||||
};
|
||||
|
||||
struct rn5t618 {
|
||||
struct regmap *regmap;
|
||||
struct device *dev;
|
||||
long variant;
|
||||
|
||||
int irq;
|
||||
struct regmap_irq_chip_data *irq_data;
|
||||
};
|
||||
|
||||
#endif /* __LINUX_MFD_RN5T618_H */
|
||||
|
|
Loading…
Reference in a new issue