ARM: dts: imx6qdl-udoo: add 7 inch LCD touchscreen panel support
The official UDOO board kit has 7 and 15.6 inch touchscreen LCD panels as options. This patch adds support for 7 inch panel only, but the 15.6 inch one should be easy to add using the same regulator, backlight device and LVDS channel. Since this panel is an option for UDOO board it is disabled by default and can be enabled (for example) by the following U-Boot commands: fdt set backlight status okay fdt set panelchan status okay fdt set panel7 status okay fdt set touchscreenp7 status okay The LVDS channels is also disabled by default to avoid warning from its driver. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
parent
d8c8c70c48
commit
880e1509db
|
@ -10,14 +10,49 @@
|
|||
*/
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
backlight = &backlight;
|
||||
panelchan = &panelchan;
|
||||
panel7 = &panel7;
|
||||
touchscreenp7 = &touchscreenp7;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart2;
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "gpio-backlight";
|
||||
gpios = <&gpio1 4 0>;
|
||||
default-on;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x10000000 0x40000000>;
|
||||
};
|
||||
|
||||
panel7: panel7 {
|
||||
/*
|
||||
* in reality it is a -20t (parallel) model,
|
||||
* but with LVDS bridge chip attached,
|
||||
* so it is equivalent to -19t model in drive
|
||||
* characteristics
|
||||
*/
|
||||
compatible = "urt,umsh-8596md-19t";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_panel>;
|
||||
power-supply = <®_panel>;
|
||||
backlight = <&backlight>;
|
||||
status = "disabled";
|
||||
|
||||
port {
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <&lvds0_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
|
@ -33,6 +68,14 @@
|
|||
startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
|
||||
gpio = <&gpio7 12 0>;
|
||||
};
|
||||
|
||||
reg_panel: regulator@1 {
|
||||
compatible = "regulator-fixed";
|
||||
reg = <1>;
|
||||
regulator-name = "lcd_panel";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 2 0>;
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
|
@ -67,6 +110,24 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
clock-frequency = <100000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c3>;
|
||||
status = "okay";
|
||||
|
||||
touchscreenp7: touchscreenp7@55 {
|
||||
compatible = "sitronix,st1232";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_touchscreenp7>;
|
||||
reg = <0x55>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <13 8>;
|
||||
gpios = <&gpio1 15 0>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
&iomuxc {
|
||||
imx6q-udoo {
|
||||
pinctrl_enet: enetgrp {
|
||||
|
@ -97,6 +158,27 @@
|
|||
>;
|
||||
};
|
||||
|
||||
pinctrl_i2c3: i2c3grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001f8b1
|
||||
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001f8b1
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_panel: panelgrp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x70
|
||||
MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x70
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_touchscreenp7: touchscreenp7grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x70
|
||||
MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0
|
||||
>;
|
||||
};
|
||||
|
||||
pinctrl_uart2: uart2grp {
|
||||
fsl,pins = <
|
||||
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
|
||||
|
@ -154,6 +236,20 @@
|
|||
};
|
||||
};
|
||||
|
||||
&ldb {
|
||||
status = "okay";
|
||||
|
||||
panelchan: lvds-channel@0 {
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
|
||||
lvds0_out: endpoint {
|
||||
remote-endpoint = <&panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_uart2>;
|
||||
|
|
Loading…
Reference in a new issue