regulator: add support for SY8106A regulator
SY8106A is an I2C attached single output regulator made by Silergy Corp, which is used on several Allwinner H3/H5 SBCs to control the power supply of the ARM cores. Add a driver for it. Signed-off-by: Ondrej Jirman <megous@megous.com> [Icenowy: Change commit message, remove enable/disable code, add default ramp_delay, add comment for go bit, add code for fixed mode voltage] Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Mark Brown <broonie@kernel.org>hifive-unleashed-5.1
Ondrej Jirman
Mark Brown
parent
32aba834f2
commit
8878302ebb
|
|
@ -13461,6 +13461,12 @@ S: Supported
|
|||
F: net/switchdev/
|
||||
F: include/net/switchdev.h
|
||||
|
||||
SY8106A REGULATOR DRIVER
|
||||
M: Icenowy Zheng <icenowy@aosc.io>
|
||||
S: Maintained
|
||||
F: drivers/regulator/sy8106a-regulator.c
|
||||
F: Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt
|
||||
|
||||
SYNC FILE FRAMEWORK
|
||||
M: Sumit Semwal <sumit.semwal@linaro.org>
|
||||
R: Gustavo Padovan <gustavo@padovan.org>
|
||||
|
|
|
|||
|
|
@ -801,6 +801,13 @@ config REGULATOR_STW481X_VMMC
|
|||
This driver supports the internal VMMC regulator in the STw481x
|
||||
PMIC chips.
|
||||
|
||||
config REGULATOR_SY8106A
|
||||
tristate "Silergy SY8106A regulator"
|
||||
depends on I2C && (OF || COMPILE_TEST)
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This driver supports SY8106A single output regulator.
|
||||
|
||||
config REGULATOR_TPS51632
|
||||
tristate "TI TPS51632 Power Regulator"
|
||||
depends on I2C
|
||||
|
|
|
|||
|
|
@ -100,6 +100,7 @@ obj-$(CONFIG_REGULATOR_SC2731) += sc2731-regulator.o
|
|||
obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
|
||||
obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
|
||||
obj-$(CONFIG_REGULATOR_SY8106A) += sy8106a-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_TPS6105X) += tps6105x-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_TPS62360) += tps62360-regulator.o
|
||||
|
|
@ -125,5 +126,4 @@ obj-$(CONFIG_REGULATOR_WM8350) += wm8350-regulator.o
|
|||
obj-$(CONFIG_REGULATOR_WM8400) += wm8400-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_WM8994) += wm8994-regulator.o
|
||||
|
||||
|
||||
ccflags-$(CONFIG_REGULATOR_DEBUG) += -DDEBUG
|
||||
|
|
|
|||
|
|
@ -0,0 +1,167 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
//
|
||||
// sy8106a-regulator.c - Regulator device driver for SY8106A
|
||||
//
|
||||
// Copyright (C) 2016 Ondřej Jirman <megous@megous.com>
|
||||
// Copyright (c) 2017-2018 Icenowy Zheng <icenowy@aosc.io>
|
||||
|
||||
#include <linux/err.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
|
||||
#define SY8106A_REG_VOUT1_SEL 0x01
|
||||
#define SY8106A_REG_VOUT_COM 0x02
|
||||
#define SY8106A_REG_VOUT1_SEL_MASK 0x7f
|
||||
#define SY8106A_DISABLE_REG BIT(0)
|
||||
/*
|
||||
* The I2C controlled voltage will only work when this bit is set; otherwise
|
||||
* it will behave like a fixed regulator.
|
||||
*/
|
||||
#define SY8106A_GO_BIT BIT(7)
|
||||
|
||||
struct sy8106a {
|
||||
struct regulator_dev *rdev;
|
||||
struct regmap *regmap;
|
||||
u32 fixed_voltage;
|
||||
};
|
||||
|
||||
static const struct regmap_config sy8106a_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
};
|
||||
|
||||
static const struct regulator_ops sy8106a_ops = {
|
||||
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
||||
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
||||
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
/* Enabling/disabling the regulator is not yet implemented */
|
||||
};
|
||||
|
||||
/* Default limits measured in millivolts */
|
||||
#define SY8106A_MIN_MV 680
|
||||
#define SY8106A_MAX_MV 1950
|
||||
#define SY8106A_STEP_MV 10
|
||||
|
||||
static const struct regulator_desc sy8106a_reg = {
|
||||
.name = "SY8106A",
|
||||
.id = 0,
|
||||
.ops = &sy8106a_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = ((SY8106A_MAX_MV - SY8106A_MIN_MV) / SY8106A_STEP_MV) + 1,
|
||||
.min_uV = (SY8106A_MIN_MV * 1000),
|
||||
.uV_step = (SY8106A_STEP_MV * 1000),
|
||||
.vsel_reg = SY8106A_REG_VOUT1_SEL,
|
||||
.vsel_mask = SY8106A_REG_VOUT1_SEL_MASK,
|
||||
/*
|
||||
* This ramp_delay is a conservative default value which works on
|
||||
* H3/H5 boards VDD-CPUX situations.
|
||||
*/
|
||||
.ramp_delay = 200,
|
||||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
/*
|
||||
* I2C driver interface functions
|
||||
*/
|
||||
static int sy8106a_i2c_probe(struct i2c_client *i2c,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct sy8106a *chip;
|
||||
struct device *dev = &i2c->dev;
|
||||
struct regulator_dev *rdev = NULL;
|
||||
struct regulator_config config = { };
|
||||
unsigned int reg, vsel;
|
||||
int error;
|
||||
|
||||
chip = devm_kzalloc(&i2c->dev, sizeof(struct sy8106a), GFP_KERNEL);
|
||||
if (!chip)
|
||||
return -ENOMEM;
|
||||
|
||||
error = of_property_read_u32(dev->of_node, "silergy,fixed-microvolt",
|
||||
&chip->fixed_voltage);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
if (chip->fixed_voltage < SY8106A_MIN_MV * 1000 ||
|
||||
chip->fixed_voltage > SY8106A_MAX_MV * 1000)
|
||||
return -EINVAL;
|
||||
|
||||
chip->regmap = devm_regmap_init_i2c(i2c, &sy8106a_regmap_config);
|
||||
if (IS_ERR(chip->regmap)) {
|
||||
error = PTR_ERR(chip->regmap);
|
||||
dev_err(dev, "Failed to allocate register map: %d\n", error);
|
||||
return error;
|
||||
}
|
||||
|
||||
config.dev = &i2c->dev;
|
||||
config.regmap = chip->regmap;
|
||||
config.driver_data = chip;
|
||||
|
||||
config.of_node = dev->of_node;
|
||||
config.init_data = of_get_regulator_init_data(dev, dev->of_node,
|
||||
&sy8106a_reg);
|
||||
|
||||
if (!config.init_data)
|
||||
return -ENOMEM;
|
||||
|
||||
/* Ensure GO_BIT is enabled when probing */
|
||||
error = regmap_read(chip->regmap, SY8106A_REG_VOUT1_SEL, ®);
|
||||
if (error)
|
||||
return error;
|
||||
|
||||
if (!(reg & SY8106A_GO_BIT)) {
|
||||
vsel = (chip->fixed_voltage / 1000 - SY8106A_MIN_MV) /
|
||||
SY8106A_STEP_MV;
|
||||
|
||||
error = regmap_write(chip->regmap, SY8106A_REG_VOUT1_SEL,
|
||||
vsel | SY8106A_GO_BIT);
|
||||
if (error)
|
||||
return error;
|
||||
}
|
||||
|
||||
/* Probe regulator */
|
||||
rdev = devm_regulator_register(&i2c->dev, &sy8106a_reg, &config);
|
||||
if (IS_ERR(rdev)) {
|
||||
error = PTR_ERR(rdev);
|
||||
dev_err(&i2c->dev, "Failed to register SY8106A regulator: %d\n", error);
|
||||
return error;
|
||||
}
|
||||
|
||||
chip->rdev = rdev;
|
||||
|
||||
i2c_set_clientdata(i2c, chip);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id sy8106a_i2c_of_match[] = {
|
||||
{ .compatible = "silergy,sy8106a" },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, sy8106a_i2c_of_match);
|
||||
|
||||
static const struct i2c_device_id sy8106a_i2c_id[] = {
|
||||
{ "sy8106a", 0 },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, sy8106a_i2c_id);
|
||||
|
||||
static struct i2c_driver sy8106a_regulator_driver = {
|
||||
.driver = {
|
||||
.name = "sy8106a",
|
||||
.of_match_table = of_match_ptr(sy8106a_i2c_of_match),
|
||||
},
|
||||
.probe = sy8106a_i2c_probe,
|
||||
.id_table = sy8106a_i2c_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(sy8106a_regulator_driver);
|
||||
|
||||
MODULE_AUTHOR("Ondřej Jirman <megous@megous.com>");
|
||||
MODULE_AUTHOR("Icenowy Zheng <icenowy@aosc.io>");
|
||||
MODULE_DESCRIPTION("Regulator device driver for Silergy SY8106A");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue