diff --git a/Documentation/devicetree/bindings/mfd/tps6507x.txt b/Documentation/devicetree/bindings/mfd/tps6507x.txt new file mode 100755 index 000000000000..8fffa3c5ed40 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/tps6507x.txt @@ -0,0 +1,91 @@ +TPS6507x Power Management Integrated Circuit + +Required properties: +- compatible: "ti,tps6507x" +- reg: I2C slave address +- regulators: This is the list of child nodes that specify the regulator + initialization data for defined regulators. Not all regulators for the + given device need to be present. The definition for each of these nodes + is defined using the standard binding for regulators found at + Documentation/devicetree/bindings/regulator/regulator.txt. + The regulator is matched with the regulator-compatible. + + The valid regulator-compatible values are: + tps6507x: vdcdc1, vdcdc2, vdcdc3, vldo1, vldo2 +- xxx-supply: Input voltage supply regulator. + These entries are required if regulators are enabled for a device. + Missing of these properties can cause the regulator registration + fails. + If some of input supply is powered through battery or always-on + supply then also it is require to have these parameters with proper + node handle of always on power supply. + tps6507x: + vindcdc1_2-supply: VDCDC1 and VDCDC2 input. + vindcdc3-supply : VDCDC3 input. + vldo1_2-supply : VLDO1 and VLDO2 input. + +Regulator Optional properties: +- defdcdc_default: It's property of DCDC2 and DCDC3 regulators. + 0: If defdcdc pin of DCDC2/DCDC3 is pulled to GND. + 1: If defdcdc pin of DCDC2/DCDC3 is driven HIGH. + If this property is not defined, it defaults to 0 (not enabled). + +Example: + + pmu: tps6507x@48 { + compatible = "ti,tps6507x"; + reg = <0x48>; + + vindcdc1_2-supply = <&vbat>; + vindcdc3-supply = <...>; + vinldo1_2-supply = <...>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + vdcdc1_reg: regulator@0 { + regulator-compatible = "VDCDC1"; + reg = <0>; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3450000>; + regulator-always-on; + regulator-boot-on; + }; + vdcdc2_reg: regulator@1 { + regulator-compatible = "VDCDC2"; + reg = <1>; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <3450000>; + regulator-always-on; + regulator-boot-on; + defdcdc_default = <1>; + }; + vdcdc3_reg: regulator@2 { + regulator-compatible = "VDCDC3"; + reg = <2>; + regulator-min-microvolt = <950000> + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + defdcdc_default = <1>; + }; + ldo1_reg: regulator@3 { + regulator-compatible = "LDO1"; + reg = <3>; + regulator-min-microvolt = <1710000>; + regulator-max-microvolt = <1890000>; + regulator-always-on; + regulator-boot-on; + }; + ldo2_reg: regulator@4 { + regulator-compatible = "LDO2"; + reg = <4>; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1320000>; + regulator-always-on; + regulator-boot-on; + }; + }; + + }; diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt index 357758cb6e92..758eae24082a 100644 --- a/Documentation/devicetree/bindings/regulator/anatop-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.txt @@ -9,6 +9,11 @@ Required properties: - anatop-min-voltage: Minimum voltage of this regulator - anatop-max-voltage: Maximum voltage of this regulator +Optional properties: +- anatop-delay-reg-offset: Anatop MFD step time register offset +- anatop-delay-bit-shift: Bit shift for the step time register +- anatop-delay-bit-width: Number of bits used in the step time register + Any property defined as part of the core regulator binding, defined in regulator.txt, can also be used. @@ -23,6 +28,9 @@ Example: anatop-reg-offset = <0x140>; anatop-vol-bit-shift = <9>; anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; anatop-min-bit-val = <1>; anatop-min-voltage = <725000>; anatop-max-voltage = <1300000>; diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt new file mode 100644 index 000000000000..a35ff99003a5 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt @@ -0,0 +1,152 @@ +* Samsung S5M8767 Voltage and Current Regulator + +The Samsung S5M8767 is a multi-function device which includes volatage and +current regulators, rtc, charger controller and other sub-blocks. It is +interfaced to the host controller using a i2c interface. Each sub-block is +addressed by the host system using different i2c slave address. This document +describes the bindings for 'pmic' sub-block of s5m8767. + +Required properties: +- compatible: Should be "samsung,s5m8767-pmic". +- reg: Specifies the i2c slave address of the pmic block. It should be 0x66. + +- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck2 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + +- s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck3 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + +- s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV) + units for buck4 when changing voltage using gpio dvs. Refer to [1] below + for additional information. + +- s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used + for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines. + +[1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional + property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage' + property should specify atleast one voltage level (which would be a + safe operating voltage). + + If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional + property is specified, then all the eight voltage values for the + 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified. + +Optional properties: +- interrupt-parent: Specifies the phandle of the interrupt controller to which + the interrupts from s5m8767 are delivered to. +- interrupts: Interrupt specifiers for two interrupt sources. + - First interrupt specifier is for 'irq1' interrupt. + - Second interrupt specifier is for 'alert' interrupt. +- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs. +- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs. +- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs. + +Additional properties required if either of the optional properties are used: + +- s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from + the possible 8 options selectable by the dvs gpios. The value of this + property should be between 0 and 7. If not specified or if out of range, the + default value of this property is set to 0. + +- s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used + for dvs. The format of the gpio specifier depends in the gpio controller. + +Regulators: The regulators of s5m8767 that have to be instantiated should be +included in a sub-node named 'regulators'. Regulator nodes included in this +sub-node should be of the format as listed below. + + regulator_name { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_1.0V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + op_mode = <1>; /* Normal Mode */ + }; + }; +The above regulator entries are defined in regulator bindings documentation +except op_mode description. + - op_mode: describes the different operating modes of the LDO's with + power mode change in SOC. The different possible values are, + 0 - always off mode + 1 - on in normal mode + 2 - low power mode + 3 - suspend mode + +The following are the names of the regulators that the s5m8767 pmic block +supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number +as per the datasheet of s5m8767. + + - LDOn + - valid values for n are 1 to 28 + - Example: LDO0, LD01, LDO28 + - BUCKn + - valid values for n are 1 to 9. + - Example: BUCK1, BUCK2, BUCK9 + +The bindings inside the regulator nodes use the standard regulator bindings +which are documented elsewhere. + +Example: + + s5m8767_pmic@66 { + compatible = "samsung,s5m8767-pmic"; + reg = <0x66>; + + s5m8767,pmic-buck2-uses-gpio-dvs; + s5m8767,pmic-buck3-uses-gpio-dvs; + s5m8767,pmic-buck4-uses-gpio-dvs; + + s5m8767,pmic-buck-default-dvs-idx = <0>; + + s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 1 0 0>, /* DVS1 */ + <&gpx0 1 1 0 0>, /* DVS2 */ + <&gpx0 2 1 0 0>; /* DVS3 */ + + s5m8767,pmic-buck-ds-gpios = <&gpx2 3 1 0 0>, /* SET1 */ + <&gpx2 4 1 0 0>, /* SET2 */ + <&gpx2 5 1 0 0>; /* SET3 */ + + s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>, + <1100000>, <1100000>, + <1000000>, <1000000>, + <1000000>, <1000000>; + + s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ABB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + op_mode = <1>; /* Normal Mode */ + }; + + ldo2_reg: LDO2 { + regulator-name = "VDD_ALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VDD_MIF_1.2V"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt b/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt new file mode 100644 index 000000000000..2f7e44a96414 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps51632-regulator.txt @@ -0,0 +1,27 @@ +TPS51632 Voltage regulators + +Required properties: +- compatible: Must be "ti,tps51632" +- reg: I2C slave address + +Optional properties: +- ti,enable-pwm-dvfs: Enable the DVFS voltage control through the PWM interface. +- ti,dvfs-step-20mV: The 20mV step voltage when PWM DVFS enabled. Missing this + will set 10mV step voltage in PWM DVFS mode. In normal mode, the voltage + step is 10mV as per datasheet. + +Any property defined as part of the core regulator binding, defined in +regulator.txt, can also be used. + +Example: + + tps51632 { + compatible = "ti,tps51632"; + reg = <0x43>; + regulator-name = "tps51632-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + ti,enable-pwm-dvfs; + ti,dvfs-step-20mV; + }; diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index 49d361a618d0..77ee26ef5941 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -60,6 +61,15 @@ static struct mfd_cell s2mps11_devs[] = { }, }; +#ifdef CONFIG_OF +static struct of_device_id sec_dt_match[] = { + { .compatible = "samsung,s5m8767-pmic", + .data = (void *)S5M8767X, + }, + {}, +}; +#endif + int sec_reg_read(struct sec_pmic_dev *sec_pmic, u8 reg, void *dest) { return regmap_read(sec_pmic->regmap, reg, dest); @@ -95,6 +105,57 @@ static struct regmap_config sec_regmap_config = { .val_bits = 8, }; + +#ifdef CONFIG_OF +/* + * Only the common platform data elements for s5m8767 are parsed here from the + * device tree. Other sub-modules of s5m8767 such as pmic, rtc , charger and + * others have to parse their own platform data elements from device tree. + * + * The s5m8767 platform data structure is instantiated here and the drivers for + * the sub-modules need not instantiate another instance while parsing their + * platform data. + */ +static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata( + struct device *dev) +{ + struct sec_platform_data *pd; + + pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); + if (!pd) { + dev_err(dev, "could not allocate memory for pdata\n"); + return ERR_PTR(-ENOMEM); + } + + /* + * ToDo: the 'wakeup' member in the platform data is more of a linux + * specfic information. Hence, there is no binding for that yet and + * not parsed here. + */ + + return pd; +} +#else +static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata( + struct device *dev) +{ + return 0; +} +#endif + +static inline int sec_i2c_get_driver_data(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ +#ifdef CONFIG_OF + if (i2c->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(sec_dt_match, i2c->dev.of_node); + return (int)match->data; + } +#endif + return (int)id->driver_data; +} + static int sec_pmic_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -111,13 +172,22 @@ static int sec_pmic_probe(struct i2c_client *i2c, sec_pmic->dev = &i2c->dev; sec_pmic->i2c = i2c; sec_pmic->irq = i2c->irq; - sec_pmic->type = id->driver_data; + sec_pmic->type = sec_i2c_get_driver_data(i2c, id); + if (sec_pmic->dev->of_node) { + pdata = sec_pmic_i2c_parse_dt_pdata(sec_pmic->dev); + if (IS_ERR(pdata)) { + ret = PTR_ERR(pdata); + return ret; + } + pdata->device_type = sec_pmic->type; + } if (pdata) { sec_pmic->device_type = pdata->device_type; sec_pmic->ono = pdata->ono; sec_pmic->irq_base = pdata->irq_base; sec_pmic->wakeup = pdata->wakeup; + sec_pmic->pdata = pdata; } sec_pmic->regmap = devm_regmap_init_i2c(i2c, &sec_regmap_config); @@ -192,6 +262,7 @@ static struct i2c_driver sec_pmic_driver = { .driver = { .name = "sec_pmic", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(sec_dt_match), }, .probe = sec_pmic_probe, .remove = sec_pmic_remove, diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c index 2b557119adad..c79ab843333e 100644 --- a/drivers/regulator/88pm8607.c +++ b/drivers/regulator/88pm8607.c @@ -30,8 +30,6 @@ struct pm8607_regulator_info { unsigned int *vol_table; unsigned int *vol_suspend; - int update_reg; - int update_bit; int slope_double; }; @@ -222,29 +220,6 @@ static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index) return ret; } -static int pm8607_set_voltage_sel(struct regulator_dev *rdev, unsigned selector) -{ - struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); - uint8_t val; - int ret; - - val = (uint8_t)(selector << (ffs(rdev->desc->vsel_mask) - 1)); - - ret = pm860x_set_bits(info->i2c, rdev->desc->vsel_reg, - rdev->desc->vsel_mask, val); - if (ret) - return ret; - switch (info->desc.id) { - case PM8607_ID_BUCK1: - case PM8607_ID_BUCK3: - ret = pm860x_set_bits(info->i2c, info->update_reg, - 1 << info->update_bit, - 1 << info->update_bit); - break; - } - return ret; -} - static int pm8606_preg_enable(struct regulator_dev *rdev) { struct pm8607_regulator_info *info = rdev_get_drvdata(rdev); @@ -276,7 +251,7 @@ static int pm8606_preg_is_enabled(struct regulator_dev *rdev) static struct regulator_ops pm8607_regulator_ops = { .list_voltage = pm8607_list_voltage, - .set_voltage_sel = pm8607_set_voltage_sel, + .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, @@ -313,11 +288,11 @@ static struct regulator_ops pm8606_preg_ops = { .n_voltages = ARRAY_SIZE(vreg##_table), \ .vsel_reg = PM8607_##vreg, \ .vsel_mask = ARRAY_SIZE(vreg##_table) - 1, \ + .apply_reg = PM8607_##ureg, \ + .apply_bit = (ubit), \ .enable_reg = PM8607_##ereg, \ .enable_mask = 1 << (ebit), \ }, \ - .update_reg = PM8607_##ureg, \ - .update_bit = (ubit), \ .slope_double = (0), \ .vol_table = (unsigned int *)&vreg##_table, \ .vol_suspend = (unsigned int *)&vreg##_suspend_table, \ @@ -343,9 +318,9 @@ static struct regulator_ops pm8606_preg_ops = { } static struct pm8607_regulator_info pm8607_regulator_info[] = { - PM8607_DVC(BUCK1, GO, 0, SUPPLIES_EN11, 0), - PM8607_DVC(BUCK2, GO, 1, SUPPLIES_EN11, 1), - PM8607_DVC(BUCK3, GO, 2, SUPPLIES_EN11, 2), + PM8607_DVC(BUCK1, GO, BIT(0), SUPPLIES_EN11, 0), + PM8607_DVC(BUCK2, GO, BIT(1), SUPPLIES_EN11, 1), + PM8607_DVC(BUCK3, GO, BIT(2), SUPPLIES_EN11, 2), PM8607_LDO(1, LDO1, 0, SUPPLIES_EN11, 3), PM8607_LDO(2, LDO2, 0, SUPPLIES_EN11, 4), @@ -372,7 +347,7 @@ static int pm8607_regulator_dt_init(struct platform_device *pdev, struct regulator_config *config) { struct device_node *nproot, *np; - nproot = pdev->dev.parent->of_node; + nproot = of_node_get(pdev->dev.parent->of_node); if (!nproot) return -ENODEV; nproot = of_find_node_by_name(nproot, "regulators"); @@ -388,6 +363,7 @@ static int pm8607_regulator_dt_init(struct platform_device *pdev, break; } } + of_node_put(nproot); return 0; } #else diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 551a22b07538..a5d97eaee99e 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -91,6 +91,7 @@ config REGULATOR_AAT2870 config REGULATOR_ARIZONA tristate "Wolfson Arizona class devices" depends on MFD_ARIZONA + depends on SND_SOC help Support for the regulators found on Wolfson Arizona class devices. @@ -277,6 +278,15 @@ config REGULATOR_LP872X help This driver supports LP8720/LP8725 PMIC +config REGULATOR_LP8755 + tristate "TI LP8755 High Performance PMU driver" + depends on I2C + select REGMAP_I2C + help + This driver supports LP8755 High Performance PMU driver. This + chip contains six step-down DC/DC converters which can support + 9 mode multiphase configuration. + config REGULATOR_LP8788 bool "TI LP8788 Power Regulators" depends on MFD_LP8788 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index b802b0c7fb02..6e8250382def 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o +obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o obj-$(CONFIG_REGULATOR_MAX8649) += max8649.o obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o diff --git a/drivers/regulator/anatop-regulator.c b/drivers/regulator/anatop-regulator.c index 8f39cac661d2..0d4a8ccbb536 100644 --- a/drivers/regulator/anatop-regulator.c +++ b/drivers/regulator/anatop-regulator.c @@ -31,12 +31,18 @@ #include #include +#define LDO_RAMP_UP_UNIT_IN_CYCLES 64 /* 64 cycles per step */ +#define LDO_RAMP_UP_FREQ_IN_MHZ 24 /* cycle based on 24M OSC */ + struct anatop_regulator { const char *name; u32 control_reg; struct regmap *anatop; int vol_bit_shift; int vol_bit_width; + u32 delay_reg; + int delay_bit_shift; + int delay_bit_width; int min_bit_val; int min_voltage; int max_voltage; @@ -55,6 +61,32 @@ static int anatop_regmap_set_voltage_sel(struct regulator_dev *reg, return regulator_set_voltage_sel_regmap(reg, selector); } +static int anatop_regmap_set_voltage_time_sel(struct regulator_dev *reg, + unsigned int old_sel, + unsigned int new_sel) +{ + struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); + u32 val; + int ret = 0; + + /* check whether need to care about LDO ramp up speed */ + if (anatop_reg->delay_bit_width && new_sel > old_sel) { + /* + * the delay for LDO ramp up time is + * based on the register setting, we need + * to calculate how many steps LDO need to + * ramp up, and how much delay needed. (us) + */ + regmap_read(anatop_reg->anatop, anatop_reg->delay_reg, &val); + val = (val >> anatop_reg->delay_bit_shift) & + ((1 << anatop_reg->delay_bit_width) - 1); + ret = (new_sel - old_sel) * (LDO_RAMP_UP_UNIT_IN_CYCLES << + val) / LDO_RAMP_UP_FREQ_IN_MHZ + 1; + } + + return ret; +} + static int anatop_regmap_get_voltage_sel(struct regulator_dev *reg) { struct anatop_regulator *anatop_reg = rdev_get_drvdata(reg); @@ -67,6 +99,7 @@ static int anatop_regmap_get_voltage_sel(struct regulator_dev *reg) static struct regulator_ops anatop_rops = { .set_voltage_sel = anatop_regmap_set_voltage_sel, + .set_voltage_time_sel = anatop_regmap_set_voltage_time_sel, .get_voltage_sel = anatop_regmap_get_voltage_sel, .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, @@ -143,6 +176,14 @@ static int anatop_regulator_probe(struct platform_device *pdev) goto anatop_probe_end; } + /* read LDO ramp up setting, only for core reg */ + of_property_read_u32(np, "anatop-delay-reg-offset", + &sreg->delay_reg); + of_property_read_u32(np, "anatop-delay-bit-width", + &sreg->delay_bit_width); + of_property_read_u32(np, "anatop-delay-bit-shift", + &sreg->delay_bit_shift); + rdesc->n_voltages = (sreg->max_voltage - sreg->min_voltage) / 25000 + 1 + sreg->min_bit_val; rdesc->min_uV = sreg->min_voltage; diff --git a/drivers/regulator/arizona-micsupp.c b/drivers/regulator/arizona-micsupp.c index a6d040cbf8ac..e87536bf0bed 100644 --- a/drivers/regulator/arizona-micsupp.c +++ b/drivers/regulator/arizona-micsupp.c @@ -21,6 +21,8 @@ #include #include #include +#include +#include #include #include @@ -34,6 +36,8 @@ struct arizona_micsupp { struct regulator_consumer_supply supply; struct regulator_init_data init_data; + + struct work_struct check_cp_work; }; static int arizona_micsupp_list_voltage(struct regulator_dev *rdev, @@ -72,9 +76,73 @@ static int arizona_micsupp_map_voltage(struct regulator_dev *rdev, return selector; } +static void arizona_micsupp_check_cp(struct work_struct *work) +{ + struct arizona_micsupp *micsupp = + container_of(work, struct arizona_micsupp, check_cp_work); + struct snd_soc_dapm_context *dapm = micsupp->arizona->dapm; + struct arizona *arizona = micsupp->arizona; + struct regmap *regmap = arizona->regmap; + unsigned int reg; + int ret; + + ret = regmap_read(regmap, ARIZONA_MIC_CHARGE_PUMP_1, ®); + if (ret != 0) { + dev_err(arizona->dev, "Failed to read CP state: %d\n", ret); + return; + } + + if (dapm) { + if ((reg & (ARIZONA_CPMIC_ENA | ARIZONA_CPMIC_BYPASS)) == + ARIZONA_CPMIC_ENA) + snd_soc_dapm_force_enable_pin(dapm, "MICSUPP"); + else + snd_soc_dapm_disable_pin(dapm, "MICSUPP"); + + snd_soc_dapm_sync(dapm); + } +} + +static int arizona_micsupp_enable(struct regulator_dev *rdev) +{ + struct arizona_micsupp *micsupp = rdev_get_drvdata(rdev); + int ret; + + ret = regulator_enable_regmap(rdev); + + if (ret == 0) + schedule_work(&micsupp->check_cp_work); + + return ret; +} + +static int arizona_micsupp_disable(struct regulator_dev *rdev) +{ + struct arizona_micsupp *micsupp = rdev_get_drvdata(rdev); + int ret; + + ret = regulator_disable_regmap(rdev); + if (ret == 0) + schedule_work(&micsupp->check_cp_work); + + return ret; +} + +static int arizona_micsupp_set_bypass(struct regulator_dev *rdev, bool ena) +{ + struct arizona_micsupp *micsupp = rdev_get_drvdata(rdev); + int ret; + + ret = regulator_set_bypass_regmap(rdev, ena); + if (ret == 0) + schedule_work(&micsupp->check_cp_work); + + return ret; +} + static struct regulator_ops arizona_micsupp_ops = { - .enable = regulator_enable_regmap, - .disable = regulator_disable_regmap, + .enable = arizona_micsupp_enable, + .disable = arizona_micsupp_disable, .is_enabled = regulator_is_enabled_regmap, .list_voltage = arizona_micsupp_list_voltage, @@ -84,7 +152,7 @@ static struct regulator_ops arizona_micsupp_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_bypass = regulator_get_bypass_regmap, - .set_bypass = regulator_set_bypass_regmap, + .set_bypass = arizona_micsupp_set_bypass, }; static const struct regulator_desc arizona_micsupp = { @@ -109,7 +177,8 @@ static const struct regulator_desc arizona_micsupp = { static const struct regulator_init_data arizona_micsupp_default = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS | - REGULATOR_CHANGE_VOLTAGE, + REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_BYPASS, .min_uV = 1700000, .max_uV = 3300000, }, @@ -131,6 +200,7 @@ static int arizona_micsupp_probe(struct platform_device *pdev) } micsupp->arizona = arizona; + INIT_WORK(&micsupp->check_cp_work, arizona_micsupp_check_cp); /* * Since the chip usually supplies itself we provide some diff --git a/drivers/regulator/as3711-regulator.c b/drivers/regulator/as3711-regulator.c index 2f1341db38a0..f0ba8c4eefa9 100644 --- a/drivers/regulator/as3711-regulator.c +++ b/drivers/regulator/as3711-regulator.c @@ -303,7 +303,7 @@ static int as3711_regulator_probe(struct platform_device *pdev) reg_data = pdata ? pdata->init_data[id] : NULL; /* No need to register if there is no regulator data */ - if (!ri->desc.name) + if (!reg_data) continue; reg = ®s[id]; diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 278584302f2d..da9782bd27d0 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -200,8 +200,8 @@ static int regulator_check_consumers(struct regulator_dev *rdev, } if (*min_uV > *max_uV) { - dev_err(regulator->dev, "Restricting voltage, %u-%uuV\n", - regulator->min_uV, regulator->max_uV); + rdev_err(rdev, "Restricting voltage, %u-%uuV\n", + *min_uV, *max_uV); return -EINVAL; } @@ -2080,10 +2080,20 @@ EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_regmap); */ int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel) { + int ret; + sel <<= ffs(rdev->desc->vsel_mask) - 1; - return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg, + ret = regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg, rdev->desc->vsel_mask, sel); + if (ret) + return ret; + + if (rdev->desc->apply_bit) + ret = regmap_update_bits(rdev->regmap, rdev->desc->apply_reg, + rdev->desc->apply_bit, + rdev->desc->apply_bit); + return ret; } EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_regmap); @@ -2229,8 +2239,11 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, best_val = rdev->desc->ops->list_voltage(rdev, ret); if (min_uV <= best_val && max_uV >= best_val) { selector = ret; - ret = rdev->desc->ops->set_voltage_sel(rdev, - ret); + if (old_selector == selector) + ret = 0; + else + ret = rdev->desc->ops->set_voltage_sel( + rdev, ret); } else { ret = -EINVAL; } @@ -2241,7 +2254,7 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev, /* Call set_voltage_time_sel if successfully obtained old_selector */ if (ret == 0 && _regulator_is_enabled(rdev) && old_selector >= 0 && - rdev->desc->ops->set_voltage_time_sel) { + old_selector != selector && rdev->desc->ops->set_voltage_time_sel) { delay = rdev->desc->ops->set_voltage_time_sel(rdev, old_selector, selector); @@ -2294,6 +2307,7 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) { struct regulator_dev *rdev = regulator->rdev; int ret = 0; + int old_min_uV, old_max_uV; mutex_lock(&rdev->mutex); @@ -2315,18 +2329,29 @@ int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) ret = regulator_check_voltage(rdev, &min_uV, &max_uV); if (ret < 0) goto out; + + /* restore original values in case of error */ + old_min_uV = regulator->min_uV; + old_max_uV = regulator->max_uV; regulator->min_uV = min_uV; regulator->max_uV = max_uV; ret = regulator_check_consumers(rdev, &min_uV, &max_uV); if (ret < 0) - goto out; + goto out2; ret = _regulator_do_set_voltage(rdev, min_uV, max_uV); - + if (ret < 0) + goto out2; + out: mutex_unlock(&rdev->mutex); return ret; +out2: + regulator->min_uV = old_min_uV; + regulator->max_uV = old_max_uV; + mutex_unlock(&rdev->mutex); + return ret; } EXPORT_SYMBOL_GPL(regulator_set_voltage); @@ -3208,7 +3233,7 @@ static int add_regulator_attributes(struct regulator_dev *rdev) if (status < 0) return status; } - if (ops->is_enabled) { + if (rdev->ena_gpio || ops->is_enabled) { status = device_create_file(dev, &dev_attr_state); if (status < 0) return status; diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c index d0963090442d..96b569abb46c 100644 --- a/drivers/regulator/da9052-regulator.c +++ b/drivers/regulator/da9052-regulator.c @@ -70,7 +70,6 @@ struct da9052_regulator_info { int step_uV; int min_uV; int max_uV; - unsigned char activate_bit; }; struct da9052_regulator { @@ -210,36 +209,6 @@ static int da9052_map_voltage(struct regulator_dev *rdev, return sel; } -static int da9052_regulator_set_voltage_sel(struct regulator_dev *rdev, - unsigned int selector) -{ - struct da9052_regulator *regulator = rdev_get_drvdata(rdev); - struct da9052_regulator_info *info = regulator->info; - int id = rdev_get_id(rdev); - int ret; - - ret = da9052_reg_update(regulator->da9052, rdev->desc->vsel_reg, - rdev->desc->vsel_mask, selector); - if (ret < 0) - return ret; - - /* Some LDOs and DCDCs are DVC controlled which requires enabling of - * the activate bit to implment the changes on the output. - */ - switch (id) { - case DA9052_ID_BUCK1: - case DA9052_ID_BUCK2: - case DA9052_ID_BUCK3: - case DA9052_ID_LDO2: - case DA9052_ID_LDO3: - ret = da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, - info->activate_bit, info->activate_bit); - break; - } - - return ret; -} - static struct regulator_ops da9052_dcdc_ops = { .get_current_limit = da9052_dcdc_get_current_limit, .set_current_limit = da9052_dcdc_set_current_limit, @@ -247,7 +216,7 @@ static struct regulator_ops da9052_dcdc_ops = { .list_voltage = da9052_list_voltage, .map_voltage = da9052_map_voltage, .get_voltage_sel = regulator_get_voltage_sel_regmap, - .set_voltage_sel = da9052_regulator_set_voltage_sel, + .set_voltage_sel = regulator_set_voltage_sel_regmap, .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, @@ -257,7 +226,7 @@ static struct regulator_ops da9052_ldo_ops = { .list_voltage = da9052_list_voltage, .map_voltage = da9052_map_voltage, .get_voltage_sel = regulator_get_voltage_sel_regmap, - .set_voltage_sel = da9052_regulator_set_voltage_sel, + .set_voltage_sel = regulator_set_voltage_sel_regmap, .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, .disable = regulator_disable_regmap, @@ -274,13 +243,14 @@ static struct regulator_ops da9052_ldo_ops = { .owner = THIS_MODULE,\ .vsel_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \ .vsel_mask = (1 << (sbits)) - 1,\ + .apply_reg = DA9052_SUPPLY_REG, \ + .apply_bit = (abits), \ .enable_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \ .enable_mask = 1 << (ebits),\ },\ .min_uV = (min) * 1000,\ .max_uV = (max) * 1000,\ .step_uV = (step) * 1000,\ - .activate_bit = (abits),\ } #define DA9052_DCDC(_id, step, min, max, sbits, ebits, abits) \ @@ -294,13 +264,14 @@ static struct regulator_ops da9052_ldo_ops = { .owner = THIS_MODULE,\ .vsel_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \ .vsel_mask = (1 << (sbits)) - 1,\ + .apply_reg = DA9052_SUPPLY_REG, \ + .apply_bit = (abits), \ .enable_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \ .enable_mask = 1 << (ebits),\ },\ .min_uV = (min) * 1000,\ .max_uV = (max) * 1000,\ .step_uV = (step) * 1000,\ - .activate_bit = (abits),\ } static struct da9052_regulator_info da9052_regulator_info[] = { @@ -395,9 +366,9 @@ static int da9052_regulator_probe(struct platform_device *pdev) config.init_data = pdata->regulators[pdev->id]; } else { #ifdef CONFIG_OF - struct device_node *nproot = da9052->dev->of_node; - struct device_node *np; + struct device_node *nproot, *np; + nproot = of_node_get(da9052->dev->of_node); if (!nproot) return -ENODEV; @@ -414,6 +385,7 @@ static int da9052_regulator_probe(struct platform_device *pdev) break; } } + of_node_put(nproot); #endif } diff --git a/drivers/regulator/da9055-regulator.c b/drivers/regulator/da9055-regulator.c index 1a05ac66878f..30221099d09c 100644 --- a/drivers/regulator/da9055-regulator.c +++ b/drivers/regulator/da9055-regulator.c @@ -58,7 +58,6 @@ struct da9055_volt_reg { int reg_b; int sl_shift; int v_mask; - int v_shift; }; struct da9055_mode_reg { @@ -388,7 +387,6 @@ static struct regulator_ops da9055_ldo_ops = { .reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \ .sl_shift = 7,\ .v_mask = (1 << (vbits)) - 1,\ - .v_shift = (vbits),\ },\ } @@ -417,7 +415,6 @@ static struct regulator_ops da9055_ldo_ops = { .reg_b = DA9055_REG_VBCORE_B + DA9055_ID_##_id, \ .sl_shift = 7,\ .v_mask = (1 << (vbits)) - 1,\ - .v_shift = (vbits),\ },\ .mode = {\ .reg = DA9055_REG_BCORE_MODE,\ diff --git a/drivers/regulator/gpio-regulator.c b/drivers/regulator/gpio-regulator.c index bae681ccd3ea..9d39eb4aafa3 100644 --- a/drivers/regulator/gpio-regulator.c +++ b/drivers/regulator/gpio-regulator.c @@ -132,7 +132,7 @@ static struct regulator_ops gpio_regulator_voltage_ops = { .list_voltage = gpio_regulator_list_voltage, }; -struct gpio_regulator_config * +static struct gpio_regulator_config * of_get_gpio_regulator_config(struct device *dev, struct device_node *np) { struct gpio_regulator_config *config; @@ -163,10 +163,7 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np) config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0); /* Fetch GPIOs. */ - for (i = 0; ; i++) - if (of_get_named_gpio(np, "gpios", i) < 0) - break; - config->nr_gpios = i; + config->nr_gpios = of_gpio_count(np); config->gpios = devm_kzalloc(dev, sizeof(struct gpio) * config->nr_gpios, diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c index 5f68ff11a298..9cb2c0f34515 100644 --- a/drivers/regulator/lp3971.c +++ b/drivers/regulator/lp3971.c @@ -73,8 +73,6 @@ static const unsigned int buck_voltage_map[] = { }; #define BUCK_TARGET_VOL_MASK 0x3f -#define BUCK_TARGET_VOL_MIN_IDX 0x01 -#define BUCK_TARGET_VOL_MAX_IDX 0x19 #define LP3971_BUCK_RAMP_REG(x) (buck_base_addr[x]+2) @@ -140,7 +138,7 @@ static int lp3971_ldo_disable(struct regulator_dev *dev) return lp3971_set_bits(lp3971, LP3971_LDO_ENABLE_REG, mask, 0); } -static int lp3971_ldo_get_voltage(struct regulator_dev *dev) +static int lp3971_ldo_get_voltage_sel(struct regulator_dev *dev) { struct lp3971 *lp3971 = rdev_get_drvdata(dev); int ldo = rdev_get_id(dev) - LP3971_LDO1; @@ -149,7 +147,7 @@ static int lp3971_ldo_get_voltage(struct regulator_dev *dev) reg = lp3971_reg_read(lp3971, LP3971_LDO_VOL_CONTR_REG(ldo)); val = (reg >> LDO_VOL_CONTR_SHIFT(ldo)) & LDO_VOL_CONTR_MASK; - return dev->desc->volt_table[val]; + return val; } static int lp3971_ldo_set_voltage_sel(struct regulator_dev *dev, @@ -168,7 +166,7 @@ static struct regulator_ops lp3971_ldo_ops = { .is_enabled = lp3971_ldo_is_enabled, .enable = lp3971_ldo_enable, .disable = lp3971_ldo_disable, - .get_voltage = lp3971_ldo_get_voltage, + .get_voltage_sel = lp3971_ldo_get_voltage_sel, .set_voltage_sel = lp3971_ldo_set_voltage_sel, }; @@ -201,24 +199,16 @@ static int lp3971_dcdc_disable(struct regulator_dev *dev) return lp3971_set_bits(lp3971, LP3971_BUCK_VOL_ENABLE_REG, mask, 0); } -static int lp3971_dcdc_get_voltage(struct regulator_dev *dev) +static int lp3971_dcdc_get_voltage_sel(struct regulator_dev *dev) { struct lp3971 *lp3971 = rdev_get_drvdata(dev); int buck = rdev_get_id(dev) - LP3971_DCDC1; u16 reg; - int val; reg = lp3971_reg_read(lp3971, LP3971_BUCK_TARGET_VOL1_REG(buck)); reg &= BUCK_TARGET_VOL_MASK; - if (reg <= BUCK_TARGET_VOL_MAX_IDX) - val = buck_voltage_map[reg]; - else { - val = 0; - dev_warn(&dev->dev, "chip reported incorrect voltage value.\n"); - } - - return val; + return reg; } static int lp3971_dcdc_set_voltage_sel(struct regulator_dev *dev, @@ -249,7 +239,7 @@ static struct regulator_ops lp3971_dcdc_ops = { .is_enabled = lp3971_dcdc_is_enabled, .enable = lp3971_dcdc_enable, .disable = lp3971_dcdc_disable, - .get_voltage = lp3971_dcdc_get_voltage, + .get_voltage_sel = lp3971_dcdc_get_voltage_sel, .set_voltage_sel = lp3971_dcdc_set_voltage_sel, }; diff --git a/drivers/regulator/lp3972.c b/drivers/regulator/lp3972.c index 69c42c318b87..0baabcfb578a 100644 --- a/drivers/regulator/lp3972.c +++ b/drivers/regulator/lp3972.c @@ -165,8 +165,6 @@ static const int buck_base_addr[] = { #define LP3972_BUCK_VOL_ENABLE_REG(x) (buck_vol_enable_addr[x]) #define LP3972_BUCK_VOL1_REG(x) (buck_base_addr[x]) #define LP3972_BUCK_VOL_MASK 0x1f -#define LP3972_BUCK_VOL_MIN_IDX(x) ((x) ? 0x01 : 0x00) -#define LP3972_BUCK_VOL_MAX_IDX(x) ((x) ? 0x19 : 0x1f) static int lp3972_i2c_read(struct i2c_client *i2c, char reg, int count, u16 *dest) @@ -257,7 +255,7 @@ static int lp3972_ldo_disable(struct regulator_dev *dev) mask, 0); } -static int lp3972_ldo_get_voltage(struct regulator_dev *dev) +static int lp3972_ldo_get_voltage_sel(struct regulator_dev *dev) { struct lp3972 *lp3972 = rdev_get_drvdata(dev); int ldo = rdev_get_id(dev) - LP3972_LDO1; @@ -267,7 +265,7 @@ static int lp3972_ldo_get_voltage(struct regulator_dev *dev) reg = lp3972_reg_read(lp3972, LP3972_LDO_VOL_CONTR_REG(ldo)); val = (reg >> LP3972_LDO_VOL_CONTR_SHIFT(ldo)) & mask; - return dev->desc->volt_table[val]; + return val; } static int lp3972_ldo_set_voltage_sel(struct regulator_dev *dev, @@ -314,7 +312,7 @@ static struct regulator_ops lp3972_ldo_ops = { .is_enabled = lp3972_ldo_is_enabled, .enable = lp3972_ldo_enable, .disable = lp3972_ldo_disable, - .get_voltage = lp3972_ldo_get_voltage, + .get_voltage_sel = lp3972_ldo_get_voltage_sel, .set_voltage_sel = lp3972_ldo_set_voltage_sel, }; @@ -353,24 +351,16 @@ static int lp3972_dcdc_disable(struct regulator_dev *dev) return val; } -static int lp3972_dcdc_get_voltage(struct regulator_dev *dev) +static int lp3972_dcdc_get_voltage_sel(struct regulator_dev *dev) { struct lp3972 *lp3972 = rdev_get_drvdata(dev); int buck = rdev_get_id(dev) - LP3972_DCDC1; u16 reg; - int val; reg = lp3972_reg_read(lp3972, LP3972_BUCK_VOL1_REG(buck)); reg &= LP3972_BUCK_VOL_MASK; - if (reg <= LP3972_BUCK_VOL_MAX_IDX(buck)) - val = dev->desc->volt_table[reg]; - else { - val = 0; - dev_warn(&dev->dev, "chip reported incorrect voltage value." - " reg = %d\n", reg); - } - return val; + return reg; } static int lp3972_dcdc_set_voltage_sel(struct regulator_dev *dev, @@ -402,7 +392,7 @@ static struct regulator_ops lp3972_dcdc_ops = { .is_enabled = lp3972_dcdc_is_enabled, .enable = lp3972_dcdc_enable, .disable = lp3972_dcdc_disable, - .get_voltage = lp3972_dcdc_get_voltage, + .get_voltage_sel = lp3972_dcdc_get_voltage_sel, .set_voltage_sel = lp3972_dcdc_set_voltage_sel, }; diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c index 9289ead715ca..8e3c7ae0047f 100644 --- a/drivers/regulator/lp872x.c +++ b/drivers/regulator/lp872x.c @@ -181,20 +181,6 @@ static inline int lp872x_update_bits(struct lp872x *lp, u8 addr, return regmap_update_bits(lp->regmap, addr, mask, data); } -static int _rdev_to_offset(struct regulator_dev *rdev) -{ - enum lp872x_regulator_id id = rdev_get_id(rdev); - - switch (id) { - case LP8720_ID_LDO1 ... LP8720_ID_BUCK: - return id; - case LP8725_ID_LDO1 ... LP8725_ID_BUCK2: - return id - LP8725_ID_BASE; - default: - return -EINVAL; - } -} - static int lp872x_get_timestep_usec(struct lp872x *lp) { enum lp872x_id chip = lp->chipid; @@ -234,28 +220,20 @@ static int lp872x_get_timestep_usec(struct lp872x *lp) static int lp872x_regulator_enable_time(struct regulator_dev *rdev) { struct lp872x *lp = rdev_get_drvdata(rdev); - enum lp872x_regulator_id regulator = rdev_get_id(rdev); + enum lp872x_regulator_id rid = rdev_get_id(rdev); int time_step_us = lp872x_get_timestep_usec(lp); - int ret, offset; + int ret; u8 addr, val; if (time_step_us < 0) return -EINVAL; - switch (regulator) { - case LP8720_ID_LDO1 ... LP8720_ID_LDO5: - case LP8725_ID_LDO1 ... LP8725_ID_LILO2: - offset = _rdev_to_offset(rdev); - if (offset < 0) - return -EINVAL; - - addr = LP872X_LDO1_VOUT + offset; + switch (rid) { + case LP8720_ID_LDO1 ... LP8720_ID_BUCK: + addr = LP872X_LDO1_VOUT + rid; break; - case LP8720_ID_BUCK: - addr = LP8720_BUCK_VOUT1; - break; - case LP8725_ID_BUCK1: - addr = LP8725_BUCK1_VOUT1; + case LP8725_ID_LDO1 ... LP8725_ID_BUCK1: + addr = LP872X_LDO1_VOUT + rid - LP8725_ID_BASE; break; case LP8725_ID_BUCK2: addr = LP8725_BUCK2_VOUT1; diff --git a/drivers/regulator/lp8755.c b/drivers/regulator/lp8755.c new file mode 100644 index 000000000000..f0f6ea05065b --- /dev/null +++ b/drivers/regulator/lp8755.c @@ -0,0 +1,566 @@ +/* + * LP8755 High Performance Power Management Unit : System Interface Driver + * (based on rev. 0.26) + * Copyright 2012 Texas Instruments + * + * Author: Daniel(Geon Si) Jeong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define LP8755_REG_BUCK0 0x00 +#define LP8755_REG_BUCK1 0x03 +#define LP8755_REG_BUCK2 0x04 +#define LP8755_REG_BUCK3 0x01 +#define LP8755_REG_BUCK4 0x05 +#define LP8755_REG_BUCK5 0x02 +#define LP8755_REG_MAX 0xFF + +#define LP8755_BUCK_EN_M BIT(7) +#define LP8755_BUCK_LINEAR_OUT_MAX 0x76 +#define LP8755_BUCK_VOUT_M 0x7F + +struct lp8755_mphase { + int nreg; + int buck_num[LP8755_BUCK_MAX]; +}; + +struct lp8755_chip { + struct device *dev; + struct regmap *regmap; + struct lp8755_platform_data *pdata; + + int irq; + unsigned int irqmask; + + int mphase; + struct regulator_dev *rdev[LP8755_BUCK_MAX]; +}; + +/** + *lp8755_read : read a single register value from lp8755. + *@pchip : device to read from + *@reg : register to read from + *@val : pointer to store read value + */ +static int lp8755_read(struct lp8755_chip *pchip, unsigned int reg, + unsigned int *val) +{ + return regmap_read(pchip->regmap, reg, val); +} + +/** + *lp8755_write : write a single register value to lp8755. + *@pchip : device to write to + *@reg : register to write to + *@val : value to be written + */ +static int lp8755_write(struct lp8755_chip *pchip, unsigned int reg, + unsigned int val) +{ + return regmap_write(pchip->regmap, reg, val); +} + +/** + *lp8755_update_bits : set the values of bit fields in lp8755 register. + *@pchip : device to read from + *@reg : register to update + *@mask : bitmask to be changed + *@val : value for bitmask + */ +static int lp8755_update_bits(struct lp8755_chip *pchip, unsigned int reg, + unsigned int mask, unsigned int val) +{ + return regmap_update_bits(pchip->regmap, reg, mask, val); +} + +static int lp8755_buck_enable_time(struct regulator_dev *rdev) +{ + int ret; + unsigned int regval; + enum lp8755_bucks id = rdev_get_id(rdev); + struct lp8755_chip *pchip = rdev_get_drvdata(rdev); + + ret = lp8755_read(pchip, 0x12 + id, ®val); + if (ret < 0) { + dev_err(pchip->dev, "i2c acceess error %s\n", __func__); + return ret; + } + return (regval & 0xff) * 100; +} + +static int lp8755_buck_set_mode(struct regulator_dev *rdev, unsigned int mode) +{ + int ret; + unsigned int regbval = 0x0; + enum lp8755_bucks id = rdev_get_id(rdev); + struct lp8755_chip *pchip = rdev_get_drvdata(rdev); + + switch (mode) { + case REGULATOR_MODE_FAST: + /* forced pwm mode */ + regbval = (0x01 << id); + break; + case REGULATOR_MODE_NORMAL: + /* enable automatic pwm/pfm mode */ + ret = lp8755_update_bits(pchip, 0x08 + id, 0x20, 0x00); + if (ret < 0) + goto err_i2c; + break; + case REGULATOR_MODE_IDLE: + /* enable automatic pwm/pfm/lppfm mode */ + ret = lp8755_update_bits(pchip, 0x08 + id, 0x20, 0x20); + if (ret < 0) + goto err_i2c; + + ret = lp8755_update_bits(pchip, 0x10, 0x01, 0x01); + if (ret < 0) + goto err_i2c; + break; + default: + dev_err(pchip->dev, "Not supported buck mode %s\n", __func__); + /* forced pwm mode */ + regbval = (0x01 << id); + } + + ret = lp8755_update_bits(pchip, 0x06, 0x01 << id, regbval); + if (ret < 0) + goto err_i2c; + return ret; +err_i2c: + dev_err(pchip->dev, "i2c acceess error %s\n", __func__); + return ret; +} + +static unsigned int lp8755_buck_get_mode(struct regulator_dev *rdev) +{ + int ret; + unsigned int regval; + enum lp8755_bucks id = rdev_get_id(rdev); + struct lp8755_chip *pchip = rdev_get_drvdata(rdev); + + ret = lp8755_read(pchip, 0x06, ®val); + if (ret < 0) + goto err_i2c; + + /* mode fast means forced pwm mode */ + if (regval & (0x01 << id)) + return REGULATOR_MODE_FAST; + + ret = lp8755_read(pchip, 0x08 + id, ®val); + if (ret < 0) + goto err_i2c; + + /* mode idle means automatic pwm/pfm/lppfm mode */ + if (regval & 0x20) + return REGULATOR_MODE_IDLE; + + /* mode normal means automatic pwm/pfm mode */ + return REGULATOR_MODE_NORMAL; + +err_i2c: + dev_err(pchip->dev, "i2c acceess error %s\n", __func__); + return 0; +} + +static int lp8755_buck_set_ramp(struct regulator_dev *rdev, int ramp) +{ + int ret; + unsigned int regval = 0x00; + enum lp8755_bucks id = rdev_get_id(rdev); + struct lp8755_chip *pchip = rdev_get_drvdata(rdev); + + /* uV/us */ + switch (ramp) { + case 0 ... 230: + regval = 0x07; + break; + case 231 ... 470: + regval = 0x06; + break; + case 471 ... 940: + regval = 0x05; + break; + case 941 ... 1900: + regval = 0x04; + break; + case 1901 ... 3800: + regval = 0x03; + break; + case 3801 ... 7500: + regval = 0x02; + break; + case 7501 ... 15000: + regval = 0x01; + break; + case 15001 ... 30000: + regval = 0x00; + break; + default: + dev_err(pchip->dev, + "Not supported ramp value %d %s\n", ramp, __func__); + return -EINVAL; + } + + ret = lp8755_update_bits(pchip, 0x07 + id, 0x07, regval); + if (ret < 0) + goto err_i2c; + return ret; +err_i2c: + dev_err(pchip->dev, "i2c acceess error %s\n", __func__); + return ret; +} + +static struct regulator_ops lp8755_buck_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .enable_time = lp8755_buck_enable_time, + .set_mode = lp8755_buck_set_mode, + .get_mode = lp8755_buck_get_mode, + .set_ramp_delay = lp8755_buck_set_ramp, +}; + +#define lp8755_rail(_id) "lp8755_buck"#_id +#define lp8755_buck_init(_id)\ +{\ + .constraints = {\ + .name = lp8755_rail(_id),\ + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,\ + .min_uV = 500000,\ + .max_uV = 1675000,\ + },\ +} + +static struct regulator_init_data lp8755_reg_default[LP8755_BUCK_MAX] = { + [LP8755_BUCK0] = lp8755_buck_init(0), + [LP8755_BUCK1] = lp8755_buck_init(1), + [LP8755_BUCK2] = lp8755_buck_init(2), + [LP8755_BUCK3] = lp8755_buck_init(3), + [LP8755_BUCK4] = lp8755_buck_init(4), + [LP8755_BUCK5] = lp8755_buck_init(5), +}; + +static const struct lp8755_mphase mphase_buck[MPHASE_CONF_MAX] = { + { 3, { LP8755_BUCK0, LP8755_BUCK3, LP8755_BUCK5 } }, + { 6, { LP8755_BUCK0, LP8755_BUCK1, LP8755_BUCK2, LP8755_BUCK3, + LP8755_BUCK4, LP8755_BUCK5 } }, + { 5, { LP8755_BUCK0, LP8755_BUCK2, LP8755_BUCK3, LP8755_BUCK4, + LP8755_BUCK5} }, + { 4, { LP8755_BUCK0, LP8755_BUCK3, LP8755_BUCK4, LP8755_BUCK5} }, + { 3, { LP8755_BUCK0, LP8755_BUCK4, LP8755_BUCK5} }, + { 2, { LP8755_BUCK0, LP8755_BUCK5} }, + { 1, { LP8755_BUCK0} }, + { 2, { LP8755_BUCK0, LP8755_BUCK3} }, + { 4, { LP8755_BUCK0, LP8755_BUCK2, LP8755_BUCK3, LP8755_BUCK5} }, +}; + +static int lp8755_init_data(struct lp8755_chip *pchip) +{ + unsigned int regval; + int ret, icnt, buck_num; + struct lp8755_platform_data *pdata = pchip->pdata; + + /* read back muti-phase configuration */ + ret = lp8755_read(pchip, 0x3D, ®val); + if (ret < 0) + goto out_i2c_error; + pchip->mphase = regval & 0x0F; + + /* set default data based on multi-phase config */ + for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) { + buck_num = mphase_buck[pchip->mphase].buck_num[icnt]; + pdata->buck_data[buck_num] = &lp8755_reg_default[buck_num]; + } + return ret; + +out_i2c_error: + dev_err(pchip->dev, "i2c acceess error %s\n", __func__); + return ret; +} + +#define lp8755_buck_desc(_id)\ +{\ + .name = lp8755_rail(_id),\ + .id = LP8755_BUCK##_id,\ + .ops = &lp8755_buck_ops,\ + .n_voltages = LP8755_BUCK_LINEAR_OUT_MAX+1,\ + .uV_step = 10000,\ + .min_uV = 500000,\ + .type = REGULATOR_VOLTAGE,\ + .owner = THIS_MODULE,\ + .enable_reg = LP8755_REG_BUCK##_id,\ + .enable_mask = LP8755_BUCK_EN_M,\ + .vsel_reg = LP8755_REG_BUCK##_id,\ + .vsel_mask = LP8755_BUCK_VOUT_M,\ +} + +static struct regulator_desc lp8755_regulators[] = { + lp8755_buck_desc(0), + lp8755_buck_desc(1), + lp8755_buck_desc(2), + lp8755_buck_desc(3), + lp8755_buck_desc(4), + lp8755_buck_desc(5), +}; + +static int lp8755_regulator_init(struct lp8755_chip *pchip) +{ + int ret, icnt, buck_num; + struct lp8755_platform_data *pdata = pchip->pdata; + struct regulator_config rconfig = { }; + + rconfig.regmap = pchip->regmap; + rconfig.dev = pchip->dev; + rconfig.driver_data = pchip; + + for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) { + buck_num = mphase_buck[pchip->mphase].buck_num[icnt]; + rconfig.init_data = pdata->buck_data[buck_num]; + rconfig.of_node = pchip->dev->of_node; + pchip->rdev[buck_num] = + regulator_register(&lp8755_regulators[buck_num], &rconfig); + if (IS_ERR(pchip->rdev[buck_num])) { + ret = PTR_ERR(pchip->rdev[buck_num]); + pchip->rdev[buck_num] = NULL; + dev_err(pchip->dev, "regulator init failed: buck %d\n", + buck_num); + goto err_buck; + } + } + + return 0; + +err_buck: + for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) + regulator_unregister(pchip->rdev[icnt]); + return ret; +} + +static irqreturn_t lp8755_irq_handler(int irq, void *data) +{ + int ret, icnt; + unsigned int flag0, flag1; + struct lp8755_chip *pchip = data; + + /* read flag0 register */ + ret = lp8755_read(pchip, 0x0D, &flag0); + if (ret < 0) + goto err_i2c; + /* clear flag register to pull up int. pin */ + ret = lp8755_write(pchip, 0x0D, 0x00); + if (ret < 0) + goto err_i2c; + + /* sent power fault detection event to specific regulator */ + for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) + if ((flag0 & (0x4 << icnt)) + && (pchip->irqmask & (0x04 << icnt)) + && (pchip->rdev[icnt] != NULL)) + regulator_notifier_call_chain(pchip->rdev[icnt], + LP8755_EVENT_PWR_FAULT, + NULL); + + /* read flag1 register */ + ret = lp8755_read(pchip, 0x0E, &flag1); + if (ret < 0) + goto err_i2c; + /* clear flag register to pull up int. pin */ + ret = lp8755_write(pchip, 0x0E, 0x00); + if (ret < 0) + goto err_i2c; + + /* send OCP event to all regualtor devices */ + if ((flag1 & 0x01) && (pchip->irqmask & 0x01)) + for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) + if (pchip->rdev[icnt] != NULL) + regulator_notifier_call_chain(pchip->rdev[icnt], + LP8755_EVENT_OCP, + NULL); + + /* send OVP event to all regualtor devices */ + if ((flag1 & 0x02) && (pchip->irqmask & 0x02)) + for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) + if (pchip->rdev[icnt] != NULL) + regulator_notifier_call_chain(pchip->rdev[icnt], + LP8755_EVENT_OVP, + NULL); + return IRQ_HANDLED; + +err_i2c: + dev_err(pchip->dev, "i2c acceess error %s\n", __func__); + return IRQ_NONE; +} + +static int lp8755_int_config(struct lp8755_chip *pchip) +{ + int ret; + unsigned int regval; + + if (pchip->irq == 0) { + dev_warn(pchip->dev, "not use interrupt : %s\n", __func__); + return 0; + } + + ret = lp8755_read(pchip, 0x0F, ®val); + if (ret < 0) + goto err_i2c; + pchip->irqmask = regval; + ret = request_threaded_irq(pchip->irq, NULL, lp8755_irq_handler, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "lp8755-irq", pchip); + if (ret) + return ret; + + return ret; + +err_i2c: + dev_err(pchip->dev, "i2c acceess error %s\n", __func__); + return ret; +} + +static const struct regmap_config lp8755_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = LP8755_REG_MAX, +}; + +static int lp8755_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret, icnt; + struct lp8755_chip *pchip; + struct lp8755_platform_data *pdata = client->dev.platform_data; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "i2c functionality check fail.\n"); + return -EOPNOTSUPP; + } + + pchip = devm_kzalloc(&client->dev, + sizeof(struct lp8755_chip), GFP_KERNEL); + if (!pchip) + return -ENOMEM; + + pchip->dev = &client->dev; + pchip->regmap = devm_regmap_init_i2c(client, &lp8755_regmap); + if (IS_ERR(pchip->regmap)) { + ret = PTR_ERR(pchip->regmap); + dev_err(&client->dev, "fail to allocate regmap %d\n", ret); + return ret; + } + i2c_set_clientdata(client, pchip); + + if (pdata != NULL) { + pchip->pdata = pdata; + pchip->mphase = pdata->mphase; + } else { + pchip->pdata = devm_kzalloc(pchip->dev, + sizeof(struct lp8755_platform_data), + GFP_KERNEL); + if (!pchip->pdata) + return -ENOMEM; + ret = lp8755_init_data(pchip); + if (ret < 0) { + dev_err(&client->dev, "fail to initialize chip\n"); + return ret; + } + } + + ret = lp8755_regulator_init(pchip); + if (ret < 0) { + dev_err(&client->dev, "fail to initialize regulators\n"); + goto err_regulator; + } + + pchip->irq = client->irq; + ret = lp8755_int_config(pchip); + if (ret < 0) { + dev_err(&client->dev, "fail to irq config\n"); + goto err_irq; + } + + return ret; + +err_irq: + for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) + regulator_unregister(pchip->rdev[icnt]); + +err_regulator: + /* output disable */ + for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) + lp8755_write(pchip, icnt, 0x00); + + return ret; +} + +static int lp8755_remove(struct i2c_client *client) +{ + int icnt; + struct lp8755_chip *pchip = i2c_get_clientdata(client); + + for (icnt = 0; icnt < mphase_buck[pchip->mphase].nreg; icnt++) + regulator_unregister(pchip->rdev[icnt]); + + for (icnt = 0; icnt < LP8755_BUCK_MAX; icnt++) + lp8755_write(pchip, icnt, 0x00); + + if (pchip->irq != 0) + free_irq(pchip->irq, pchip); + + return 0; +} + +static const struct i2c_device_id lp8755_id[] = { + {LP8755_NAME, 0}, + {} +}; + +MODULE_DEVICE_TABLE(i2c, lp8755_id); + +static struct i2c_driver lp8755_i2c_driver = { + .driver = { + .name = LP8755_NAME, + }, + .probe = lp8755_probe, + .remove = lp8755_remove, + .id_table = lp8755_id, +}; + +static int __init lp8755_init(void) +{ + return i2c_add_driver(&lp8755_i2c_driver); +} + +subsys_initcall(lp8755_init); + +static void __exit lp8755_exit(void) +{ + i2c_del_driver(&lp8755_i2c_driver); +} + +module_exit(lp8755_exit); + +MODULE_DESCRIPTION("Texas Instruments lp8755 driver"); +MODULE_AUTHOR("Daniel Jeong "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/regulator/lp8788-buck.c b/drivers/regulator/lp8788-buck.c index aef3f2b0c5ea..97891a7ea7b2 100644 --- a/drivers/regulator/lp8788-buck.c +++ b/drivers/regulator/lp8788-buck.c @@ -103,16 +103,6 @@ static const int lp8788_buck_vtbl[] = { 1950000, 2000000, }; -static const u8 buck1_vout_addr[] = { - LP8788_BUCK1_VOUT0, LP8788_BUCK1_VOUT1, - LP8788_BUCK1_VOUT2, LP8788_BUCK1_VOUT3, -}; - -static const u8 buck2_vout_addr[] = { - LP8788_BUCK2_VOUT0, LP8788_BUCK2_VOUT1, - LP8788_BUCK2_VOUT2, LP8788_BUCK2_VOUT3, -}; - static void lp8788_buck1_set_dvs(struct lp8788_buck *buck) { struct lp8788_buck1_dvs *dvs = (struct lp8788_buck1_dvs *)buck->dvs; @@ -235,7 +225,7 @@ static u8 lp8788_select_buck_vout_addr(struct lp8788_buck *buck, lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val); idx = (val & LP8788_BUCK1_DVS_M) >> LP8788_BUCK1_DVS_S; } - addr = buck1_vout_addr[idx]; + addr = LP8788_BUCK1_VOUT0 + idx; break; case BUCK2: if (mode == EXTPIN) { @@ -258,7 +248,7 @@ static u8 lp8788_select_buck_vout_addr(struct lp8788_buck *buck, lp8788_read_byte(buck->lp, LP8788_BUCK_DVS_SEL, &val); idx = (val & LP8788_BUCK2_DVS_M) >> LP8788_BUCK2_DVS_S; } - addr = buck2_vout_addr[idx]; + addr = LP8788_BUCK2_VOUT0 + idx; break; default: goto err; @@ -429,7 +419,8 @@ static struct regulator_desc lp8788_buck_desc[] = { }, }; -static int lp8788_dvs_gpio_request(struct lp8788_buck *buck, +static int lp8788_dvs_gpio_request(struct platform_device *pdev, + struct lp8788_buck *buck, enum lp8788_buck_id id) { struct lp8788_platform_data *pdata = buck->lp->pdata; @@ -440,7 +431,7 @@ static int lp8788_dvs_gpio_request(struct lp8788_buck *buck, switch (id) { case BUCK1: gpio = pdata->buck1_dvs->gpio; - ret = devm_gpio_request_one(buck->lp->dev, gpio, DVS_LOW, + ret = devm_gpio_request_one(&pdev->dev, gpio, DVS_LOW, b1_name); if (ret) return ret; @@ -448,9 +439,9 @@ static int lp8788_dvs_gpio_request(struct lp8788_buck *buck, buck->dvs = pdata->buck1_dvs; break; case BUCK2: - for (i = 0 ; i < LP8788_NUM_BUCK2_DVS ; i++) { + for (i = 0; i < LP8788_NUM_BUCK2_DVS; i++) { gpio = pdata->buck2_dvs->gpio[i]; - ret = devm_gpio_request_one(buck->lp->dev, gpio, + ret = devm_gpio_request_one(&pdev->dev, gpio, DVS_LOW, b2_name[i]); if (ret) return ret; @@ -464,7 +455,8 @@ static int lp8788_dvs_gpio_request(struct lp8788_buck *buck, return 0; } -static int lp8788_init_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id) +static int lp8788_init_dvs(struct platform_device *pdev, + struct lp8788_buck *buck, enum lp8788_buck_id id) { struct lp8788_platform_data *pdata = buck->lp->pdata; u8 mask[] = { LP8788_BUCK1_DVS_SEL_M, LP8788_BUCK2_DVS_SEL_M }; @@ -472,7 +464,7 @@ static int lp8788_init_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id) u8 default_dvs_mode[] = { LP8788_BUCK1_DVS_I2C, LP8788_BUCK2_DVS_I2C }; /* no dvs for buck3, 4 */ - if (id == BUCK3 || id == BUCK4) + if (id > BUCK2) return 0; /* no dvs platform data, then dvs will be selected by I2C registers */ @@ -483,7 +475,7 @@ static int lp8788_init_dvs(struct lp8788_buck *buck, enum lp8788_buck_id id) (id == BUCK2 && !pdata->buck2_dvs)) goto set_default_dvs_mode; - if (lp8788_dvs_gpio_request(buck, id)) + if (lp8788_dvs_gpio_request(pdev, buck, id)) goto set_default_dvs_mode; return lp8788_update_bits(buck->lp, LP8788_BUCK_DVS_SEL, mask[id], @@ -503,17 +495,20 @@ static int lp8788_buck_probe(struct platform_device *pdev) struct regulator_dev *rdev; int ret; - buck = devm_kzalloc(lp->dev, sizeof(struct lp8788_buck), GFP_KERNEL); + if (id >= LP8788_NUM_BUCKS) + return -EINVAL; + + buck = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_buck), GFP_KERNEL); if (!buck) return -ENOMEM; buck->lp = lp; - ret = lp8788_init_dvs(buck, id); + ret = lp8788_init_dvs(pdev, buck, id); if (ret) return ret; - cfg.dev = lp->dev; + cfg.dev = pdev->dev.parent; cfg.init_data = lp->pdata ? lp->pdata->buck_data[id] : NULL; cfg.driver_data = buck; cfg.regmap = lp->regmap; @@ -521,7 +516,7 @@ static int lp8788_buck_probe(struct platform_device *pdev) rdev = regulator_register(&lp8788_buck_desc[id], &cfg); if (IS_ERR(rdev)) { ret = PTR_ERR(rdev); - dev_err(lp->dev, "BUCK%d regulator register err = %d\n", + dev_err(&pdev->dev, "BUCK%d regulator register err = %d\n", id + 1, ret); return ret; } diff --git a/drivers/regulator/lp8788-ldo.c b/drivers/regulator/lp8788-ldo.c index 3792741708ce..cd5a14ad9263 100644 --- a/drivers/regulator/lp8788-ldo.c +++ b/drivers/regulator/lp8788-ldo.c @@ -88,11 +88,6 @@ #define ENABLE GPIOF_OUT_INIT_HIGH #define DISABLE GPIOF_OUT_INIT_LOW -enum lp8788_enable_mode { - REGISTER, - EXTPIN, -}; - enum lp8788_ldo_id { DLDO1, DLDO2, @@ -189,114 +184,38 @@ static enum lp8788_ldo_id lp8788_aldo_id[] = { ALDO10, }; -/* DLDO 7, 9 and 11, ALDO 1 ~ 5 and 7 - : can be enabled either by external pin or by i2c register */ -static enum lp8788_enable_mode -lp8788_get_ldo_enable_mode(struct lp8788_ldo *ldo, enum lp8788_ldo_id id) -{ - int ret; - u8 val, mask; - - ret = lp8788_read_byte(ldo->lp, LP8788_EN_SEL, &val); - if (ret) - return ret; - - switch (id) { - case DLDO7: - mask = LP8788_EN_SEL_DLDO7_M; - break; - case DLDO9: - case DLDO11: - mask = LP8788_EN_SEL_DLDO911_M; - break; - case ALDO1: - mask = LP8788_EN_SEL_ALDO1_M; - break; - case ALDO2 ... ALDO4: - mask = LP8788_EN_SEL_ALDO234_M; - break; - case ALDO5: - mask = LP8788_EN_SEL_ALDO5_M; - break; - case ALDO7: - mask = LP8788_EN_SEL_ALDO7_M; - break; - default: - return REGISTER; - } - - return val & mask ? EXTPIN : REGISTER; -} - -static int lp8788_ldo_ctrl_by_extern_pin(struct lp8788_ldo *ldo, int pinstate) -{ - struct lp8788_ldo_enable_pin *pin = ldo->en_pin; - - if (!pin) - return -EINVAL; - - if (gpio_is_valid(pin->gpio)) - gpio_set_value(pin->gpio, pinstate); - - return 0; -} - -static int lp8788_ldo_is_enabled_by_extern_pin(struct lp8788_ldo *ldo) -{ - struct lp8788_ldo_enable_pin *pin = ldo->en_pin; - - if (!pin) - return -EINVAL; - - return gpio_get_value(pin->gpio) ? 1 : 0; -} - static int lp8788_ldo_enable(struct regulator_dev *rdev) { struct lp8788_ldo *ldo = rdev_get_drvdata(rdev); - enum lp8788_ldo_id id = rdev_get_id(rdev); - enum lp8788_enable_mode mode = lp8788_get_ldo_enable_mode(ldo, id); - switch (mode) { - case EXTPIN: - return lp8788_ldo_ctrl_by_extern_pin(ldo, ENABLE); - case REGISTER: + if (ldo->en_pin) { + gpio_set_value(ldo->en_pin->gpio, ENABLE); + return 0; + } else { return regulator_enable_regmap(rdev); - default: - return -EINVAL; } } static int lp8788_ldo_disable(struct regulator_dev *rdev) { struct lp8788_ldo *ldo = rdev_get_drvdata(rdev); - enum lp8788_ldo_id id = rdev_get_id(rdev); - enum lp8788_enable_mode mode = lp8788_get_ldo_enable_mode(ldo, id); - switch (mode) { - case EXTPIN: - return lp8788_ldo_ctrl_by_extern_pin(ldo, DISABLE); - case REGISTER: + if (ldo->en_pin) { + gpio_set_value(ldo->en_pin->gpio, DISABLE); + return 0; + } else { return regulator_disable_regmap(rdev); - default: - return -EINVAL; } } static int lp8788_ldo_is_enabled(struct regulator_dev *rdev) { struct lp8788_ldo *ldo = rdev_get_drvdata(rdev); - enum lp8788_ldo_id id = rdev_get_id(rdev); - enum lp8788_enable_mode mode = lp8788_get_ldo_enable_mode(ldo, id); - switch (mode) { - case EXTPIN: - return lp8788_ldo_is_enabled_by_extern_pin(ldo); - case REGISTER: + if (ldo->en_pin) + return gpio_get_value(ldo->en_pin->gpio) ? 1 : 0; + else return regulator_is_enabled_regmap(rdev); - default: - return -EINVAL; - } } static int lp8788_ldo_enable_time(struct regulator_dev *rdev) @@ -616,10 +535,11 @@ static struct regulator_desc lp8788_aldo_desc[] = { }, }; -static int lp8788_gpio_request_ldo_en(struct lp8788_ldo *ldo, +static int lp8788_gpio_request_ldo_en(struct platform_device *pdev, + struct lp8788_ldo *ldo, enum lp8788_ext_ldo_en_id id) { - struct device *dev = ldo->lp->dev; + struct device *dev = &pdev->dev; struct lp8788_ldo_enable_pin *pin = ldo->en_pin; int ret, gpio, pinstate; char *name[] = { @@ -647,7 +567,8 @@ static int lp8788_gpio_request_ldo_en(struct lp8788_ldo *ldo, return ret; } -static int lp8788_config_ldo_enable_mode(struct lp8788_ldo *ldo, +static int lp8788_config_ldo_enable_mode(struct platform_device *pdev, + struct lp8788_ldo *ldo, enum lp8788_ldo_id id) { int ret; @@ -693,9 +614,11 @@ static int lp8788_config_ldo_enable_mode(struct lp8788_ldo *ldo, ldo->en_pin = pdata->ldo_pin[enable_id]; - ret = lp8788_gpio_request_ldo_en(ldo, enable_id); - if (ret) + ret = lp8788_gpio_request_ldo_en(pdev, ldo, enable_id); + if (ret) { + ldo->en_pin = NULL; goto set_default_ldo_enable_mode; + } return ret; @@ -712,16 +635,16 @@ static int lp8788_dldo_probe(struct platform_device *pdev) struct regulator_dev *rdev; int ret; - ldo = devm_kzalloc(lp->dev, sizeof(struct lp8788_ldo), GFP_KERNEL); + ldo = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_ldo), GFP_KERNEL); if (!ldo) return -ENOMEM; ldo->lp = lp; - ret = lp8788_config_ldo_enable_mode(ldo, lp8788_dldo_id[id]); + ret = lp8788_config_ldo_enable_mode(pdev, ldo, lp8788_dldo_id[id]); if (ret) return ret; - cfg.dev = lp->dev; + cfg.dev = pdev->dev.parent; cfg.init_data = lp->pdata ? lp->pdata->dldo_data[id] : NULL; cfg.driver_data = ldo; cfg.regmap = lp->regmap; @@ -729,7 +652,7 @@ static int lp8788_dldo_probe(struct platform_device *pdev) rdev = regulator_register(&lp8788_dldo_desc[id], &cfg); if (IS_ERR(rdev)) { ret = PTR_ERR(rdev); - dev_err(lp->dev, "DLDO%d regulator register err = %d\n", + dev_err(&pdev->dev, "DLDO%d regulator register err = %d\n", id + 1, ret); return ret; } @@ -768,16 +691,16 @@ static int lp8788_aldo_probe(struct platform_device *pdev) struct regulator_dev *rdev; int ret; - ldo = devm_kzalloc(lp->dev, sizeof(struct lp8788_ldo), GFP_KERNEL); + ldo = devm_kzalloc(&pdev->dev, sizeof(struct lp8788_ldo), GFP_KERNEL); if (!ldo) return -ENOMEM; ldo->lp = lp; - ret = lp8788_config_ldo_enable_mode(ldo, lp8788_aldo_id[id]); + ret = lp8788_config_ldo_enable_mode(pdev, ldo, lp8788_aldo_id[id]); if (ret) return ret; - cfg.dev = lp->dev; + cfg.dev = pdev->dev.parent; cfg.init_data = lp->pdata ? lp->pdata->aldo_data[id] : NULL; cfg.driver_data = ldo; cfg.regmap = lp->regmap; @@ -785,7 +708,7 @@ static int lp8788_aldo_probe(struct platform_device *pdev) rdev = regulator_register(&lp8788_aldo_desc[id], &cfg); if (IS_ERR(rdev)) { ret = PTR_ERR(rdev); - dev_err(lp->dev, "ALDO%d regulator register err = %d\n", + dev_err(&pdev->dev, "ALDO%d regulator register err = %d\n", id + 1, ret); return ret; } diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c index cca18a3c0294..e4586ee8858d 100644 --- a/drivers/regulator/max77686.c +++ b/drivers/regulator/max77686.c @@ -75,13 +75,14 @@ static int max77686_buck_set_suspend_disable(struct regulator_dev *rdev) { unsigned int val; struct max77686_data *max77686 = rdev_get_drvdata(rdev); + int id = rdev_get_id(rdev); - if (rdev->desc->id == MAX77686_BUCK1) + if (id == MAX77686_BUCK1) val = 0x1; else val = 0x1 << MAX77686_OPMODE_BUCK234_SHIFT; - max77686->opmode[rdev->desc->id] = val; + max77686->opmode[id] = val; return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, rdev->desc->enable_mask, val); @@ -93,9 +94,10 @@ static int max77686_set_suspend_mode(struct regulator_dev *rdev, { struct max77686_data *max77686 = rdev_get_drvdata(rdev); unsigned int val; + int id = rdev_get_id(rdev); /* BUCK[5-9] doesn't support this feature */ - if (rdev->desc->id >= MAX77686_BUCK5) + if (id >= MAX77686_BUCK5) return 0; switch (mode) { @@ -111,7 +113,7 @@ static int max77686_set_suspend_mode(struct regulator_dev *rdev, return -EINVAL; } - max77686->opmode[rdev->desc->id] = val; + max77686->opmode[id] = val; return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, rdev->desc->enable_mask, val); @@ -140,7 +142,7 @@ static int max77686_ldo_set_suspend_mode(struct regulator_dev *rdev, return -EINVAL; } - max77686->opmode[rdev->desc->id] = val; + max77686->opmode[rdev_get_id(rdev)] = val; return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, rdev->desc->enable_mask, val); @@ -152,7 +154,7 @@ static int max77686_enable(struct regulator_dev *rdev) return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, rdev->desc->enable_mask, - max77686->opmode[rdev->desc->id]); + max77686->opmode[rdev_get_id(rdev)]); } static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) diff --git a/drivers/regulator/max8907-regulator.c b/drivers/regulator/max8907-regulator.c index d40cf7fdb546..4568c15fa78d 100644 --- a/drivers/regulator/max8907-regulator.c +++ b/drivers/regulator/max8907-regulator.c @@ -224,11 +224,11 @@ static struct of_regulator_match max8907_matches[] = { static int max8907_regulator_parse_dt(struct platform_device *pdev) { - struct device_node *np = pdev->dev.parent->of_node; - struct device_node *regulators; + struct device_node *np, *regulators; int ret; - if (!pdev->dev.parent->of_node) + np = of_node_get(pdev->dev.parent->of_node); + if (!np) return 0; regulators = of_find_node_by_name(np, "regulators"); @@ -239,6 +239,7 @@ static int max8907_regulator_parse_dt(struct platform_device *pdev) ret = of_regulator_match(&pdev->dev, regulators, max8907_matches, ARRAY_SIZE(max8907_matches)); + of_node_put(regulators); if (ret < 0) { dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret); diff --git a/drivers/regulator/max8925-regulator.c b/drivers/regulator/max8925-regulator.c index 446a85445553..0d5f64a805a0 100644 --- a/drivers/regulator/max8925-regulator.c +++ b/drivers/regulator/max8925-regulator.c @@ -252,7 +252,7 @@ static int max8925_regulator_dt_init(struct platform_device *pdev, { struct device_node *nproot, *np; int rcount; - nproot = pdev->dev.parent->of_node; + nproot = of_node_get(pdev->dev.parent->of_node); if (!nproot) return -ENODEV; np = of_find_node_by_name(nproot, "regulators"); @@ -263,6 +263,7 @@ static int max8925_regulator_dt_init(struct platform_device *pdev, rcount = of_regulator_match(&pdev->dev, np, &max8925_regulator_matches[ridx], 1); + of_node_put(np); if (rcount < 0) return -ENODEV; config->init_data = max8925_regulator_matches[ridx].init_data; diff --git a/drivers/regulator/max8997.c b/drivers/regulator/max8997.c index 836908ce505e..0ac7a87519b4 100644 --- a/drivers/regulator/max8997.c +++ b/drivers/regulator/max8997.c @@ -54,6 +54,13 @@ struct max8997_data { u8 saved_states[MAX8997_REG_MAX]; }; +static const unsigned int safeoutvolt[] = { + 4850000, + 4900000, + 4950000, + 3300000, +}; + static inline void max8997_set_gpio(struct max8997_data *max8997) { int set3 = (max8997->buck125_gpioindex) & 0x1; @@ -130,29 +137,6 @@ static const struct voltage_map_desc *reg_voltage_map[] = { [MAX8997_CHARGER_TOPOFF] = &topoff_current_map_desc, }; -static int max8997_list_voltage_safeout(struct regulator_dev *rdev, - unsigned int selector) -{ - int rid = rdev_get_id(rdev); - - if (rid == MAX8997_ESAFEOUT1 || rid == MAX8997_ESAFEOUT2) { - switch (selector) { - case 0: - return 4850000; - case 1: - return 4900000; - case 2: - return 4950000; - case 3: - return 3300000; - default: - return -EINVAL; - } - } - - return -EINVAL; -} - static int max8997_list_voltage_charger_cv(struct regulator_dev *rdev, unsigned int selector) { @@ -522,7 +506,7 @@ static int max8997_set_voltage_ldobuck(struct regulator_dev *rdev, return ret; } -static int max8997_set_voltage_ldobuck_time_sel(struct regulator_dev *rdev, +static int max8997_set_voltage_buck_time_sel(struct regulator_dev *rdev, unsigned int old_selector, unsigned int new_selector) { @@ -720,49 +704,23 @@ out: return 0; } -static const int safeoutvolt[] = { - 3300000, - 4850000, - 4900000, - 4950000, -}; - /* For SAFEOUT1 and SAFEOUT2 */ -static int max8997_set_voltage_safeout(struct regulator_dev *rdev, - int min_uV, int max_uV, unsigned *selector) +static int max8997_set_voltage_safeout_sel(struct regulator_dev *rdev, + unsigned selector) { struct max8997_data *max8997 = rdev_get_drvdata(rdev); struct i2c_client *i2c = max8997->iodev->i2c; int rid = rdev_get_id(rdev); int reg, shift = 0, mask, ret; - int i = 0; - u8 val; if (rid != MAX8997_ESAFEOUT1 && rid != MAX8997_ESAFEOUT2) return -EINVAL; - for (i = 0; i < ARRAY_SIZE(safeoutvolt); i++) { - if (min_uV <= safeoutvolt[i] && - max_uV >= safeoutvolt[i]) - break; - } - - if (i >= ARRAY_SIZE(safeoutvolt)) - return -EINVAL; - - if (i == 0) - val = 0x3; - else - val = i - 1; - ret = max8997_get_voltage_register(rdev, ®, &shift, &mask); if (ret) return ret; - ret = max8997_update_reg(i2c, reg, val << shift, mask << shift); - *selector = val; - - return ret; + return max8997_update_reg(i2c, reg, selector << shift, mask << shift); } static int max8997_reg_disable_suspend(struct regulator_dev *rdev) @@ -799,7 +757,6 @@ static struct regulator_ops max8997_ldo_ops = { .disable = max8997_reg_disable, .get_voltage_sel = max8997_get_voltage_sel, .set_voltage = max8997_set_voltage_ldobuck, - .set_voltage_time_sel = max8997_set_voltage_ldobuck_time_sel, .set_suspend_disable = max8997_reg_disable_suspend, }; @@ -810,7 +767,7 @@ static struct regulator_ops max8997_buck_ops = { .disable = max8997_reg_disable, .get_voltage_sel = max8997_get_voltage_sel, .set_voltage = max8997_set_voltage_buck, - .set_voltage_time_sel = max8997_set_voltage_ldobuck_time_sel, + .set_voltage_time_sel = max8997_set_voltage_buck_time_sel, .set_suspend_disable = max8997_reg_disable_suspend, }; @@ -823,12 +780,12 @@ static struct regulator_ops max8997_fixedvolt_ops = { }; static struct regulator_ops max8997_safeout_ops = { - .list_voltage = max8997_list_voltage_safeout, + .list_voltage = regulator_list_voltage_table, .is_enabled = max8997_reg_is_enabled, .enable = max8997_reg_enable, .disable = max8997_reg_disable, .get_voltage_sel = max8997_get_voltage_sel, - .set_voltage = max8997_set_voltage_safeout, + .set_voltage_sel = max8997_set_voltage_safeout_sel, .set_suspend_disable = max8997_reg_disable_suspend, }; @@ -960,7 +917,7 @@ static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev, struct max8997_regulator_data *rdata; unsigned int i, dvs_voltage_nr = 1, ret; - pmic_np = iodev->dev->of_node; + pmic_np = of_node_get(iodev->dev->of_node); if (!pmic_np) { dev_err(&pdev->dev, "could not find pmic sub-node\n"); return -ENODEV; @@ -973,13 +930,12 @@ static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev, } /* count the number of regulators to be supported in pmic */ - pdata->num_regulators = 0; - for_each_child_of_node(regulators_np, reg_np) - pdata->num_regulators++; + pdata->num_regulators = of_get_child_count(regulators_np); rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) * pdata->num_regulators, GFP_KERNEL); if (!rdata) { + of_node_put(regulators_np); dev_err(&pdev->dev, "could not allocate memory for regulator data\n"); return -ENOMEM; } @@ -1002,6 +958,7 @@ static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev, rdata->reg_node = reg_np; rdata++; } + of_node_put(regulators_np); if (of_get_property(pmic_np, "max8997,pmic-buck1-uses-gpio-dvs", NULL)) pdata->buck1_gpiodvs = true; @@ -1233,13 +1190,15 @@ static int max8997_pmic_probe(struct platform_device *pdev) int id = pdata->regulators[i].id; desc = reg_voltage_map[id]; - if (desc) + if (desc) { regulators[id].n_voltages = (desc->max - desc->min) / desc->step + 1; - else if (id == MAX8997_ESAFEOUT1 || id == MAX8997_ESAFEOUT2) - regulators[id].n_voltages = 4; - else if (id == MAX8997_CHARGER_CV) + } else if (id == MAX8997_ESAFEOUT1 || id == MAX8997_ESAFEOUT2) { + regulators[id].volt_table = safeoutvolt; + regulators[id].n_voltages = ARRAY_SIZE(safeoutvolt); + } else if (id == MAX8997_CHARGER_CV) { regulators[id].n_voltages = 16; + } config.dev = max8997->dev; config.init_data = pdata->regulators[i].initdata; diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c index 0a8dd1cbee6f..b588f07c7cad 100644 --- a/drivers/regulator/max8998.c +++ b/drivers/regulator/max8998.c @@ -311,25 +311,13 @@ static int max8998_set_voltage_buck_sel(struct regulator_dev *rdev, dev_get_platdata(max8998->iodev->dev); struct i2c_client *i2c = max8998->iodev->i2c; int buck = rdev_get_id(rdev); - int reg, shift = 0, mask, ret; - int j, previous_sel; + int reg, shift = 0, mask, ret, j; static u8 buck1_last_val; ret = max8998_get_voltage_register(rdev, ®, &shift, &mask); if (ret) return ret; - previous_sel = max8998_get_voltage_sel(rdev); - - /* Check if voltage needs to be changed */ - /* if previous_voltage equal new voltage, return */ - if (previous_sel == selector) { - dev_dbg(max8998->dev, "No voltage change, old:%d, new:%d\n", - regulator_list_voltage_linear(rdev, previous_sel), - regulator_list_voltage_linear(rdev, selector)); - return ret; - } - switch (buck) { case MAX8998_BUCK1: dev_dbg(max8998->dev, diff --git a/drivers/regulator/mc13892-regulator.c b/drivers/regulator/mc13892-regulator.c index 0d84b1f33199..9891aec47b57 100644 --- a/drivers/regulator/mc13892-regulator.c +++ b/drivers/regulator/mc13892-regulator.c @@ -164,6 +164,14 @@ static const unsigned int mc13892_sw1[] = { 1350000, 1375000 }; +/* + * Note: this table is used to derive SWxVSEL by index into + * the array. Offset the values by the index of 1100000uV + * to get the actual register value for that voltage selector + * if the HI bit is to be set as well. + */ +#define MC13892_SWxHI_SEL_OFFSET 20 + static const unsigned int mc13892_sw[] = { 600000, 625000, 650000, 675000, 700000, 725000, 750000, 775000, 800000, 825000, 850000, 875000, @@ -239,7 +247,6 @@ static const unsigned int mc13892_pwgtdrv[] = { }; static struct regulator_ops mc13892_gpo_regulator_ops; -/* sw regulators need special care due to the "hi bit" */ static struct regulator_ops mc13892_sw_regulator_ops; @@ -396,7 +403,7 @@ static int mc13892_sw_regulator_get_voltage_sel(struct regulator_dev *rdev) { struct mc13xxx_regulator_priv *priv = rdev_get_drvdata(rdev); int ret, id = rdev_get_id(rdev); - unsigned int val; + unsigned int val, selector; dev_dbg(rdev_get_dev(rdev), "%s id: %d\n", __func__, id); @@ -407,12 +414,28 @@ static int mc13892_sw_regulator_get_voltage_sel(struct regulator_dev *rdev) if (ret) return ret; - val = (val & mc13892_regulators[id].vsel_mask) - >> mc13892_regulators[id].vsel_shift; + /* + * Figure out if the HI bit is set inside the switcher mode register + * since this means the selector value we return is at a different + * offset into the selector table. + * + * According to the MC13892 documentation note 59 (Table 47) the SW1 + * buck switcher does not support output range programming therefore + * the HI bit must always remain 0. So do not do anything strange if + * our register is MC13892_SWITCHERS0. + */ - dev_dbg(rdev_get_dev(rdev), "%s id: %d val: %d\n", __func__, id, val); + selector = val & mc13892_regulators[id].vsel_mask; - return val; + if ((mc13892_regulators[id].vsel_reg != MC13892_SWITCHERS0) && + (val & MC13892_SWITCHERS0_SWxHI)) { + selector += MC13892_SWxHI_SEL_OFFSET; + } + + dev_dbg(rdev_get_dev(rdev), "%s id: %d val: 0x%08x selector: %d\n", + __func__, id, val, selector); + + return selector; } static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev, @@ -425,18 +448,35 @@ static int mc13892_sw_regulator_set_voltage_sel(struct regulator_dev *rdev, volt = rdev->desc->volt_table[selector]; mask = mc13892_regulators[id].vsel_mask; - reg_value = selector << mc13892_regulators[id].vsel_shift; + reg_value = selector; - if (volt > 1375000) { - mask |= MC13892_SWITCHERS0_SWxHI; - reg_value |= MC13892_SWITCHERS0_SWxHI; - } else if (volt < 1100000) { - mask |= MC13892_SWITCHERS0_SWxHI; - reg_value &= ~MC13892_SWITCHERS0_SWxHI; + /* + * Don't mess with the HI bit or support HI voltage offsets for SW1. + * + * Since the get_voltage_sel callback has given a fudged value for + * the selector offset, we need to back out that offset if HI is + * to be set so we write the correct value to the register. + * + * The HI bit addition and selector offset handling COULD be more + * complicated by shifting and masking off the voltage selector part + * of the register then logical OR it back in, but since the selector + * is at bits 4:0 there is very little point. This makes the whole + * thing more readable and we do far less work. + */ + + if (mc13892_regulators[id].vsel_reg != MC13892_SWITCHERS0) { + if (volt > 1375000) { + reg_value -= MC13892_SWxHI_SEL_OFFSET; + reg_value |= MC13892_SWITCHERS0_SWxHI; + mask |= MC13892_SWITCHERS0_SWxHI; + } else if (volt < 1100000) { + reg_value &= ~MC13892_SWITCHERS0_SWxHI; + mask |= MC13892_SWITCHERS0_SWxHI; + } } mc13xxx_lock(priv->mc13xxx); - ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].reg, mask, + ret = mc13xxx_reg_rmw(priv->mc13xxx, mc13892_regulators[id].vsel_reg, mask, reg_value); mc13xxx_unlock(priv->mc13xxx); @@ -495,15 +535,18 @@ static int mc13892_regulator_probe(struct platform_device *pdev) struct mc13xxx_regulator_init_data *mc13xxx_data; struct regulator_config config = { }; int i, ret; - int num_regulators = 0; + int num_regulators = 0, num_parsed; u32 val; num_regulators = mc13xxx_get_num_regulators_dt(pdev); + if (num_regulators <= 0 && pdata) num_regulators = pdata->num_regulators; if (num_regulators <= 0) return -EINVAL; + num_parsed = num_regulators; + priv = devm_kzalloc(&pdev->dev, sizeof(*priv) + num_regulators * sizeof(priv->regulators[0]), GFP_KERNEL); @@ -520,7 +563,7 @@ static int mc13892_regulator_probe(struct platform_device *pdev) if (ret) goto err_unlock; - /* enable switch auto mode */ + /* enable switch auto mode (on 2.0A silicon only) */ if ((val & 0x0000FFFF) == 0x45d0) { ret = mc13xxx_reg_rmw(mc13892, MC13892_SWITCHERS4, MC13892_SWITCHERS4_SW1MODE_M | @@ -546,7 +589,39 @@ static int mc13892_regulator_probe(struct platform_device *pdev) = mc13892_vcam_get_mode; mc13xxx_data = mc13xxx_parse_regulators_dt(pdev, mc13892_regulators, - ARRAY_SIZE(mc13892_regulators)); + ARRAY_SIZE(mc13892_regulators), + &num_parsed); + + /* + * Perform a little sanity check on the regulator tree - if we found + * a number of regulators from mc13xxx_get_num_regulators_dt and + * then parsed a smaller number in mc13xxx_parse_regulators_dt then + * there is a regulator defined in the regulators node which has + * not matched any usable regulator in the driver. In this case, + * there is one missing and what will happen is the first regulator + * will get registered again. + * + * Fix this by basically making our number of registerable regulators + * equal to the number of regulators we parsed. We are allocating + * too much memory for priv, but this is unavoidable at this point. + * + * As an example of how this can happen, try making a typo in your + * regulators node (vviohi {} instead of viohi {}) so that the name + * does not match.. + * + * The check will basically pass for platform data (non-DT) because + * mc13xxx_parse_regulators_dt for !CONFIG_OF will not touch num_parsed. + * + */ + if (num_parsed != num_regulators) { + dev_warn(&pdev->dev, + "parsed %d != regulators %d - check your device tree!\n", + num_parsed, num_regulators); + + num_regulators = num_parsed; + priv->num_regulators = num_regulators; + } + for (i = 0; i < num_regulators; i++) { struct regulator_init_data *init_data; struct regulator_desc *desc; diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c index 4ed89c654110..23cf9f9c383b 100644 --- a/drivers/regulator/mc13xxx-regulator-core.c +++ b/drivers/regulator/mc13xxx-regulator-core.c @@ -164,29 +164,30 @@ EXPORT_SYMBOL_GPL(mc13xxx_fixed_regulator_ops); #ifdef CONFIG_OF int mc13xxx_get_num_regulators_dt(struct platform_device *pdev) { - struct device_node *parent, *child; - int num = 0; + struct device_node *parent; + int num; of_node_get(pdev->dev.parent->of_node); parent = of_find_node_by_name(pdev->dev.parent->of_node, "regulators"); if (!parent) return -ENODEV; - for_each_child_of_node(parent, child) - num++; - + num = of_get_child_count(parent); + of_node_put(parent); return num; } EXPORT_SYMBOL_GPL(mc13xxx_get_num_regulators_dt); struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt( struct platform_device *pdev, struct mc13xxx_regulator *regulators, - int num_regulators) + int num_regulators, int *num_parsed) { struct mc13xxx_regulator_priv *priv = platform_get_drvdata(pdev); struct mc13xxx_regulator_init_data *data, *p; struct device_node *parent, *child; - int i; + int i, parsed = 0; + + *num_parsed = 0; of_node_get(pdev->dev.parent->of_node); parent = of_find_node_by_name(pdev->dev.parent->of_node, "regulators"); @@ -195,24 +196,32 @@ struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt( data = devm_kzalloc(&pdev->dev, sizeof(*data) * priv->num_regulators, GFP_KERNEL); - if (!data) + if (!data) { + of_node_put(parent); return NULL; + } + p = data; for_each_child_of_node(parent, child) { for (i = 0; i < num_regulators; i++) { if (!of_node_cmp(child->name, regulators[i].desc.name)) { + p->id = i; p->init_data = of_get_regulator_init_data( &pdev->dev, child); p->node = child; p++; + + parsed++; break; } } } + of_node_put(parent); + *num_parsed = parsed; return data; } EXPORT_SYMBOL_GPL(mc13xxx_parse_regulators_dt); diff --git a/drivers/regulator/mc13xxx.h b/drivers/regulator/mc13xxx.h index 06c8903f182a..007f83387fd6 100644 --- a/drivers/regulator/mc13xxx.h +++ b/drivers/regulator/mc13xxx.h @@ -39,7 +39,7 @@ extern int mc13xxx_fixed_regulator_set_voltage(struct regulator_dev *rdev, extern int mc13xxx_get_num_regulators_dt(struct platform_device *pdev); extern struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt( struct platform_device *pdev, struct mc13xxx_regulator *regulators, - int num_regulators); + int num_regulators, int *num_parsed); #else static inline int mc13xxx_get_num_regulators_dt(struct platform_device *pdev) { @@ -48,7 +48,7 @@ static inline int mc13xxx_get_num_regulators_dt(struct platform_device *pdev) static inline struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt( struct platform_device *pdev, struct mc13xxx_regulator *regulators, - int num_regulators) + int num_regulators, int *num_parsed) { return NULL; } diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index c9e912f583bc..cde13bb5a8fb 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -527,6 +527,7 @@ static void palmas_dt_to_pdata(struct device *dev, u32 prop; int idx, ret; + node = of_node_get(node); regulators = of_find_node_by_name(node, "regulators"); if (!regulators) { dev_info(dev, "regulator node not found\n"); @@ -535,6 +536,7 @@ static void palmas_dt_to_pdata(struct device *dev, ret = of_regulator_match(dev, regulators, palmas_matches, PALMAS_NUM_REGS); + of_node_put(regulators); if (ret < 0) { dev_err(dev, "Error parsing regulator init data: %d\n", ret); return; @@ -565,11 +567,6 @@ static void palmas_dt_to_pdata(struct device *dev, if (!ret) pdata->reg_init[idx]->mode_sleep = prop; - ret = of_property_read_u32(palmas_matches[idx].of_node, - "ti,warm_reset", &prop); - if (!ret) - pdata->reg_init[idx]->warm_reset = prop; - ret = of_property_read_u32(palmas_matches[idx].of_node, "ti,tstep", &prop); if (!ret) diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c index 33b65c9ad5d5..8a831947c351 100644 --- a/drivers/regulator/s5m8767.c +++ b/drivers/regulator/s5m8767.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -21,6 +22,9 @@ #include #include #include +#include + +#define S5M8767_OPMODE_NORMAL_MODE 0x1 struct s5m8767_info { struct device *dev; @@ -255,10 +259,8 @@ static int s5m8767_reg_disable(struct regulator_dev *rdev) return sec_reg_update(s5m8767->iodev, reg, ~mask, mask); } -static int s5m8767_get_voltage_register(struct regulator_dev *rdev, int *_reg) +static int s5m8767_get_vsel_reg(int reg_id, struct s5m8767_info *s5m8767) { - struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev); - int reg_id = rdev_get_id(rdev); int reg; switch (reg_id) { @@ -296,43 +298,18 @@ static int s5m8767_get_voltage_register(struct regulator_dev *rdev, int *_reg) return -EINVAL; } - *_reg = reg; - - return 0; + return reg; } -static int s5m8767_get_voltage_sel(struct regulator_dev *rdev) -{ - struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev); - int reg, mask, ret; - int reg_id = rdev_get_id(rdev); - unsigned int val; - - ret = s5m8767_get_voltage_register(rdev, ®); - if (ret) - return ret; - - mask = (reg_id < S5M8767_BUCK1) ? 0x3f : 0xff; - - ret = sec_reg_read(s5m8767->iodev, reg, &val); - if (ret) - return ret; - - val &= mask; - - return val; -} - -static int s5m8767_convert_voltage_to_sel( - const struct sec_voltage_desc *desc, - int min_vol, int max_vol) +static int s5m8767_convert_voltage_to_sel(const struct sec_voltage_desc *desc, + int min_vol) { int selector = 0; if (desc == NULL) return -EINVAL; - if (max_vol < desc->min || min_vol > desc->max) + if (min_vol > desc->max) return -EINVAL; if (min_vol < desc->min) @@ -340,7 +317,7 @@ static int s5m8767_convert_voltage_to_sel( selector = DIV_ROUND_UP(min_vol - desc->min, desc->step); - if (desc->min + desc->step * selector > max_vol) + if (desc->min + desc->step * selector > desc->max) return -EINVAL; return selector; @@ -373,15 +350,13 @@ static int s5m8767_set_voltage_sel(struct regulator_dev *rdev, { struct s5m8767_info *s5m8767 = rdev_get_drvdata(rdev); int reg_id = rdev_get_id(rdev); - int reg, mask, ret = 0, old_index, index = 0; + int old_index, index = 0; u8 *buck234_vol = NULL; switch (reg_id) { case S5M8767_LDO1 ... S5M8767_LDO28: - mask = 0x3f; break; case S5M8767_BUCK1 ... S5M8767_BUCK6: - mask = 0xff; if (reg_id == S5M8767_BUCK2 && s5m8767->buck2_gpiodvs) buck234_vol = &s5m8767->buck2_vol[0]; else if (reg_id == S5M8767_BUCK3 && s5m8767->buck3_gpiodvs) @@ -392,7 +367,6 @@ static int s5m8767_set_voltage_sel(struct regulator_dev *rdev, case S5M8767_BUCK7 ... S5M8767_BUCK8: return -EINVAL; case S5M8767_BUCK9: - mask = 0xff; break; default: return -EINVAL; @@ -412,11 +386,7 @@ static int s5m8767_set_voltage_sel(struct regulator_dev *rdev, else return s5m8767_set_low(s5m8767); } else { - ret = s5m8767_get_voltage_register(rdev, ®); - if (ret) - return ret; - - return sec_reg_update(s5m8767->iodev, reg, selector, mask); + return regulator_set_voltage_sel_regmap(rdev, selector); } } @@ -441,7 +411,7 @@ static struct regulator_ops s5m8767_ops = { .is_enabled = s5m8767_reg_is_enabled, .enable = s5m8767_reg_enable, .disable = s5m8767_reg_disable, - .get_voltage_sel = s5m8767_get_voltage_sel, + .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = s5m8767_set_voltage_sel, .set_voltage_time_sel = s5m8767_set_voltage_time_sel, }; @@ -508,10 +478,182 @@ static struct regulator_desc regulators[] = { s5m8767_regulator_desc(BUCK9), }; +#ifdef CONFIG_OF +static int s5m8767_pmic_dt_parse_dvs_gpio(struct sec_pmic_dev *iodev, + struct sec_platform_data *pdata, + struct device_node *pmic_np) +{ + int i, gpio; + + for (i = 0; i < 3; i++) { + gpio = of_get_named_gpio(pmic_np, + "s5m8767,pmic-buck-dvs-gpios", i); + if (!gpio_is_valid(gpio)) { + dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio); + return -EINVAL; + } + pdata->buck_gpios[i] = gpio; + } + return 0; +} + +static int s5m8767_pmic_dt_parse_ds_gpio(struct sec_pmic_dev *iodev, + struct sec_platform_data *pdata, + struct device_node *pmic_np) +{ + int i, gpio; + + for (i = 0; i < 3; i++) { + gpio = of_get_named_gpio(pmic_np, + "s5m8767,pmic-buck-ds-gpios", i); + if (!gpio_is_valid(gpio)) { + dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio); + return -EINVAL; + } + pdata->buck_ds[i] = gpio; + } + return 0; +} + +static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev, + struct sec_platform_data *pdata) +{ + struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent); + struct device_node *pmic_np, *regulators_np, *reg_np; + struct sec_regulator_data *rdata; + struct sec_opmode_data *rmode; + unsigned int i, dvs_voltage_nr = 1, ret; + + pmic_np = iodev->dev->of_node; + if (!pmic_np) { + dev_err(iodev->dev, "could not find pmic sub-node\n"); + return -ENODEV; + } + + regulators_np = of_find_node_by_name(pmic_np, "regulators"); + if (!regulators_np) { + dev_err(iodev->dev, "could not find regulators sub-node\n"); + return -EINVAL; + } + + /* count the number of regulators to be supported in pmic */ + pdata->num_regulators = of_get_child_count(regulators_np); + + rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) * + pdata->num_regulators, GFP_KERNEL); + if (!rdata) { + dev_err(iodev->dev, + "could not allocate memory for regulator data\n"); + return -ENOMEM; + } + + rmode = devm_kzalloc(&pdev->dev, sizeof(*rmode) * + pdata->num_regulators, GFP_KERNEL); + if (!rdata) { + dev_err(iodev->dev, + "could not allocate memory for regulator mode\n"); + return -ENOMEM; + } + + pdata->regulators = rdata; + pdata->opmode = rmode; + for_each_child_of_node(regulators_np, reg_np) { + for (i = 0; i < ARRAY_SIZE(regulators); i++) + if (!of_node_cmp(reg_np->name, regulators[i].name)) + break; + + if (i == ARRAY_SIZE(regulators)) { + dev_warn(iodev->dev, + "don't know how to configure regulator %s\n", + reg_np->name); + continue; + } + + rdata->id = i; + rdata->initdata = of_get_regulator_init_data( + &pdev->dev, reg_np); + rdata->reg_node = reg_np; + rdata++; + rmode->id = i; + if (of_property_read_u32(reg_np, "op_mode", + &rmode->mode)) { + dev_warn(iodev->dev, + "no op_mode property property at %s\n", + reg_np->full_name); + + rmode->mode = S5M8767_OPMODE_NORMAL_MODE; + } + rmode++; + } + + if (of_get_property(pmic_np, "s5m8767,pmic-buck2-uses-gpio-dvs", NULL)) + pdata->buck2_gpiodvs = true; + + if (of_get_property(pmic_np, "s5m8767,pmic-buck3-uses-gpio-dvs", NULL)) + pdata->buck3_gpiodvs = true; + + if (of_get_property(pmic_np, "s5m8767,pmic-buck4-uses-gpio-dvs", NULL)) + pdata->buck4_gpiodvs = true; + + if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs || + pdata->buck4_gpiodvs) { + ret = s5m8767_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np); + if (ret) + return -EINVAL; + + if (of_property_read_u32(pmic_np, + "s5m8767,pmic-buck-default-dvs-idx", + &pdata->buck_default_idx)) { + pdata->buck_default_idx = 0; + } else { + if (pdata->buck_default_idx >= 8) { + pdata->buck_default_idx = 0; + dev_info(iodev->dev, + "invalid value for default dvs index, use 0\n"); + } + } + dvs_voltage_nr = 8; + } + + ret = s5m8767_pmic_dt_parse_ds_gpio(iodev, pdata, pmic_np); + if (ret) + return -EINVAL; + + if (of_property_read_u32_array(pmic_np, + "s5m8767,pmic-buck2-dvs-voltage", + pdata->buck2_voltage, dvs_voltage_nr)) { + dev_err(iodev->dev, "buck2 voltages not specified\n"); + return -EINVAL; + } + + if (of_property_read_u32_array(pmic_np, + "s5m8767,pmic-buck3-dvs-voltage", + pdata->buck3_voltage, dvs_voltage_nr)) { + dev_err(iodev->dev, "buck3 voltages not specified\n"); + return -EINVAL; + } + + if (of_property_read_u32_array(pmic_np, + "s5m8767,pmic-buck4-dvs-voltage", + pdata->buck4_voltage, dvs_voltage_nr)) { + dev_err(iodev->dev, "buck4 voltages not specified\n"); + return -EINVAL; + } + + return 0; +} +#else +static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev, + struct sec_platform_data *pdata) +{ + return 0; +} +#endif /* CONFIG_OF */ + static int s5m8767_pmic_probe(struct platform_device *pdev) { struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent); - struct sec_platform_data *pdata = dev_get_platdata(iodev->dev); + struct sec_platform_data *pdata = iodev->pdata; struct regulator_config config = { }; struct regulator_dev **rdev; struct s5m8767_info *s5m8767; @@ -522,6 +664,12 @@ static int s5m8767_pmic_probe(struct platform_device *pdev) return -ENODEV; } + if (iodev->dev->of_node) { + ret = s5m8767_pmic_dt_parse_pdata(pdev, pdata); + if (ret) + return ret; + } + if (pdata->buck2_gpiodvs) { if (pdata->buck3_gpiodvs || pdata->buck4_gpiodvs) { dev_err(&pdev->dev, "S5M8767 GPIO DVS NOT VALID\n"); @@ -577,23 +725,17 @@ static int s5m8767_pmic_probe(struct platform_device *pdev) s5m8767->opmode = pdata->opmode; buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2, - pdata->buck2_init, - pdata->buck2_init + - buck_voltage_val2.step); + pdata->buck2_init); sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK2DVS2, buck_init); buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2, - pdata->buck3_init, - pdata->buck3_init + - buck_voltage_val2.step); + pdata->buck3_init); sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK3DVS2, buck_init); buck_init = s5m8767_convert_voltage_to_sel(&buck_voltage_val2, - pdata->buck4_init, - pdata->buck4_init + - buck_voltage_val2.step); + pdata->buck4_init); sec_reg_write(s5m8767->iodev, S5M8767_REG_BUCK4DVS2, buck_init); @@ -602,27 +744,21 @@ static int s5m8767_pmic_probe(struct platform_device *pdev) s5m8767->buck2_vol[i] = s5m8767_convert_voltage_to_sel( &buck_voltage_val2, - pdata->buck2_voltage[i], - pdata->buck2_voltage[i] + - buck_voltage_val2.step); + pdata->buck2_voltage[i]); } if (s5m8767->buck3_gpiodvs) { s5m8767->buck3_vol[i] = s5m8767_convert_voltage_to_sel( &buck_voltage_val2, - pdata->buck3_voltage[i], - pdata->buck3_voltage[i] + - buck_voltage_val2.step); + pdata->buck3_voltage[i]); } if (s5m8767->buck4_gpiodvs) { s5m8767->buck4_vol[i] = s5m8767_convert_voltage_to_sel( &buck_voltage_val2, - pdata->buck4_voltage[i], - pdata->buck4_voltage[i] + - buck_voltage_val2.step); + pdata->buck4_voltage[i]); } } @@ -760,11 +896,19 @@ static int s5m8767_pmic_probe(struct platform_device *pdev) (desc->max - desc->min) / desc->step + 1; regulators[id].min_uV = desc->min; regulators[id].uV_step = desc->step; + regulators[id].vsel_reg = + s5m8767_get_vsel_reg(id, s5m8767); + if (id < S5M8767_BUCK1) + regulators[id].vsel_mask = 0x3f; + else + regulators[id].vsel_mask = 0xff; } config.dev = s5m8767->dev; config.init_data = pdata->regulators[i].initdata; config.driver_data = s5m8767; + config.regmap = iodev->regmap; + config.of_node = pdata->regulators[i].reg_node; rdev[i] = regulator_register(®ulators[id], &config); if (IS_ERR(rdev[i])) { diff --git a/drivers/regulator/tps51632-regulator.c b/drivers/regulator/tps51632-regulator.c index ab21133e6784..6e67be75ea1b 100644 --- a/drivers/regulator/tps51632-regulator.c +++ b/drivers/regulator/tps51632-regulator.c @@ -28,10 +28,13 @@ #include #include #include +#include +#include #include #include #include #include +#include #include #include @@ -85,49 +88,8 @@ struct tps51632_chip { struct regulator_desc desc; struct regulator_dev *rdev; struct regmap *regmap; - bool enable_pwm_dvfs; }; -static int tps51632_dcdc_get_voltage_sel(struct regulator_dev *rdev) -{ - struct tps51632_chip *tps = rdev_get_drvdata(rdev); - unsigned int data; - int ret; - unsigned int reg = TPS51632_VOLTAGE_SELECT_REG; - int vsel; - - if (tps->enable_pwm_dvfs) - reg = TPS51632_VOLTAGE_BASE_REG; - - ret = regmap_read(tps->regmap, reg, &data); - if (ret < 0) { - dev_err(tps->dev, "reg read failed, err %d\n", ret); - return ret; - } - - vsel = data & TPS51632_VOUT_MASK; - return vsel; -} - -static int tps51632_dcdc_set_voltage_sel(struct regulator_dev *rdev, - unsigned selector) -{ - struct tps51632_chip *tps = rdev_get_drvdata(rdev); - int ret; - unsigned int reg = TPS51632_VOLTAGE_SELECT_REG; - - if (tps->enable_pwm_dvfs) - reg = TPS51632_VOLTAGE_BASE_REG; - - if (selector > TPS51632_MAX_VSEL) - return -EINVAL; - - ret = regmap_write(tps->regmap, reg, selector); - if (ret < 0) - dev_err(tps->dev, "reg write failed, err %d\n", ret); - return ret; -} - static int tps51632_dcdc_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) { @@ -144,8 +106,8 @@ static int tps51632_dcdc_set_ramp_delay(struct regulator_dev *rdev, } static struct regulator_ops tps51632_dcdc_ops = { - .get_voltage_sel = tps51632_dcdc_get_voltage_sel, - .set_voltage_sel = tps51632_dcdc_set_voltage_sel, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, .list_voltage = regulator_list_voltage_linear, .set_voltage_time_sel = regulator_set_voltage_time_sel, .set_ramp_delay = tps51632_dcdc_set_ramp_delay, @@ -162,7 +124,6 @@ static int tps51632_init_dcdc(struct tps51632_chip *tps, goto skip_pwm_config; control |= TPS51632_DVFS_PWMEN; - tps->enable_pwm_dvfs = pdata->enable_pwm_dvfs; vsel = TPS51632_VOLT_VSEL(pdata->base_voltage_uV); ret = regmap_write(tps->regmap, TPS51632_VOLTAGE_BASE_REG, vsel); if (ret < 0) { @@ -205,22 +166,96 @@ skip_pwm_config: return ret; } -static bool rd_wr_reg(struct device *dev, unsigned int reg) +static bool is_volatile_reg(struct device *dev, unsigned int reg) { - if ((reg >= 0x8) && (reg <= 0x10)) + switch (reg) { + case TPS51632_OFFSET_REG: + case TPS51632_FAULT_REG: + case TPS51632_IMON_REG: + return true; + default: return false; - return true; + } +} + +static bool is_read_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case 0x08 ... 0x0F: + return false; + default: + return true; + } +} + +static bool is_write_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case TPS51632_VOLTAGE_SELECT_REG: + case TPS51632_VOLTAGE_BASE_REG: + case TPS51632_VMAX_REG: + case TPS51632_DVFS_CONTROL_REG: + case TPS51632_POWER_STATE_REG: + case TPS51632_SLEW_REGS: + return true; + default: + return false; + } } static const struct regmap_config tps51632_regmap_config = { .reg_bits = 8, .val_bits = 8, - .writeable_reg = rd_wr_reg, - .readable_reg = rd_wr_reg, + .writeable_reg = is_write_reg, + .readable_reg = is_read_reg, + .volatile_reg = is_volatile_reg, .max_register = TPS51632_MAX_REG - 1, .cache_type = REGCACHE_RBTREE, }; +#if defined(CONFIG_OF) +static const struct of_device_id tps51632_of_match[] = { + { .compatible = "ti,tps51632",}, + {}, +}; +MODULE_DEVICE_TABLE(of, tps51632_of_match); + +static struct tps51632_regulator_platform_data * + of_get_tps51632_platform_data(struct device *dev) +{ + struct tps51632_regulator_platform_data *pdata; + struct device_node *np = dev->of_node; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(dev, "Memory alloc failed for platform data\n"); + return NULL; + } + + pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node); + if (!pdata->reg_init_data) { + dev_err(dev, "Not able to get OF regulator init data\n"); + return NULL; + } + + pdata->enable_pwm_dvfs = + of_property_read_bool(np, "ti,enable-pwm-dvfs"); + pdata->dvfs_step_20mV = of_property_read_bool(np, "ti,dvfs-step-20mV"); + + pdata->base_voltage_uV = pdata->reg_init_data->constraints.min_uV ? : + TPS51632_MIN_VOLATGE; + pdata->max_voltage_uV = pdata->reg_init_data->constraints.max_uV ? : + TPS51632_MAX_VOLATGE; + return pdata; +} +#else +static struct tps51632_regulator_platform_data * + of_get_tps51632_platform_data(struct device *dev) +{ + return NULL; +} +#endif + static int tps51632_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -230,7 +265,19 @@ static int tps51632_probe(struct i2c_client *client, int ret; struct regulator_config config = { }; + if (client->dev.of_node) { + const struct of_device_id *match; + match = of_match_device(of_match_ptr(tps51632_of_match), + &client->dev); + if (!match) { + dev_err(&client->dev, "Error: No device match found\n"); + return -ENODEV; + } + } + pdata = client->dev.platform_data; + if (!pdata && client->dev.of_node) + pdata = of_get_tps51632_platform_data(&client->dev); if (!pdata) { dev_err(&client->dev, "No Platform data\n"); return -EINVAL; @@ -269,6 +316,12 @@ static int tps51632_probe(struct i2c_client *client, tps->desc.type = REGULATOR_VOLTAGE; tps->desc.owner = THIS_MODULE; + if (pdata->enable_pwm_dvfs) + tps->desc.vsel_reg = TPS51632_VOLTAGE_BASE_REG; + else + tps->desc.vsel_reg = TPS51632_VOLTAGE_SELECT_REG; + tps->desc.vsel_mask = TPS51632_VOUT_MASK; + tps->regmap = devm_regmap_init_i2c(client, &tps51632_regmap_config); if (IS_ERR(tps->regmap)) { ret = PTR_ERR(tps->regmap); @@ -319,6 +372,7 @@ static struct i2c_driver tps51632_i2c_driver = { .driver = { .name = "tps51632", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(tps51632_of_match), }, .probe = tps51632_probe, .remove = tps51632_remove, diff --git a/drivers/regulator/tps6507x-regulator.c b/drivers/regulator/tps6507x-regulator.c index 0233cfb56560..54aa2da7283b 100644 --- a/drivers/regulator/tps6507x-regulator.c +++ b/drivers/regulator/tps6507x-regulator.c @@ -23,8 +23,10 @@ #include #include #include +#include #include #include +#include /* DCDC's */ #define TPS6507X_DCDC_1 0 @@ -356,6 +358,80 @@ static struct regulator_ops tps6507x_pmic_ops = { .list_voltage = regulator_list_voltage_table, }; +#ifdef CONFIG_OF +static struct of_regulator_match tps6507x_matches[] = { + { .name = "VDCDC1"}, + { .name = "VDCDC2"}, + { .name = "VDCDC3"}, + { .name = "LDO1"}, + { .name = "LDO2"}, +}; + +static struct tps6507x_board *tps6507x_parse_dt_reg_data( + struct platform_device *pdev, + struct of_regulator_match **tps6507x_reg_matches) +{ + struct tps6507x_board *tps_board; + struct device_node *np = pdev->dev.parent->of_node; + struct device_node *regulators; + struct of_regulator_match *matches; + static struct regulator_init_data *reg_data; + int idx = 0, count, ret; + + tps_board = devm_kzalloc(&pdev->dev, sizeof(*tps_board), + GFP_KERNEL); + if (!tps_board) { + dev_err(&pdev->dev, "Failure to alloc pdata for regulators.\n"); + return NULL; + } + + regulators = of_find_node_by_name(np, "regulators"); + if (!regulators) { + dev_err(&pdev->dev, "regulator node not found\n"); + return NULL; + } + + count = ARRAY_SIZE(tps6507x_matches); + matches = tps6507x_matches; + + ret = of_regulator_match(&pdev->dev, regulators, matches, count); + if (ret < 0) { + dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", + ret); + return NULL; + } + + *tps6507x_reg_matches = matches; + + reg_data = devm_kzalloc(&pdev->dev, (sizeof(struct regulator_init_data) + * TPS6507X_NUM_REGULATOR), GFP_KERNEL); + if (!reg_data) { + dev_err(&pdev->dev, "Failure to alloc init data for regulators.\n"); + return NULL; + } + + tps_board->tps6507x_pmic_init_data = reg_data; + + for (idx = 0; idx < count; idx++) { + if (!matches[idx].init_data || !matches[idx].of_node) + continue; + + memcpy(®_data[idx], matches[idx].init_data, + sizeof(struct regulator_init_data)); + + } + + return tps_board; +} +#else +static inline struct tps6507x_board *tps6507x_parse_dt_reg_data( + struct platform_device *pdev, + struct of_regulator_match **tps6507x_reg_matches) +{ + *tps6507x_reg_matches = NULL; + return NULL; +} +#endif static int tps6507x_pmic_probe(struct platform_device *pdev) { struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent); @@ -365,8 +441,10 @@ static int tps6507x_pmic_probe(struct platform_device *pdev) struct regulator_dev *rdev; struct tps6507x_pmic *tps; struct tps6507x_board *tps_board; + struct of_regulator_match *tps6507x_reg_matches = NULL; int i; int error; + unsigned int prop; /** * tps_board points to pmic related constants @@ -374,6 +452,9 @@ static int tps6507x_pmic_probe(struct platform_device *pdev) */ tps_board = dev_get_platdata(tps6507x_dev->dev); + if (!tps_board && tps6507x_dev->dev->of_node) + tps_board = tps6507x_parse_dt_reg_data(pdev, + &tps6507x_reg_matches); if (!tps_board) return -EINVAL; @@ -415,6 +496,17 @@ static int tps6507x_pmic_probe(struct platform_device *pdev) config.init_data = init_data; config.driver_data = tps; + if (tps6507x_reg_matches) { + error = of_property_read_u32( + tps6507x_reg_matches[i].of_node, + "ti,defdcdc_default", &prop); + + if (!error) + tps->info[i]->defdcdc_default = prop; + + config.of_node = tps6507x_reg_matches[i].of_node; + } + rdev = regulator_register(&tps->desc[i], &config); if (IS_ERR(rdev)) { dev_err(tps6507x_dev->dev, diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c index 41c391789c97..c8e70451df38 100644 --- a/drivers/regulator/tps65090-regulator.c +++ b/drivers/regulator/tps65090-regulator.c @@ -19,11 +19,13 @@ #include #include #include +#include #include #include #include #include #include +#include #include struct tps65090_regulator { @@ -67,8 +69,8 @@ static struct regulator_desc tps65090_regulator_desc[] = { tps65090_REG_DESC(FET5, "infet5", 0x13, tps65090_reg_contol_ops), tps65090_REG_DESC(FET6, "infet6", 0x14, tps65090_reg_contol_ops), tps65090_REG_DESC(FET7, "infet7", 0x15, tps65090_reg_contol_ops), - tps65090_REG_DESC(LDO1, "vsys_l1", 0, tps65090_ldo_ops), - tps65090_REG_DESC(LDO2, "vsys_l2", 0, tps65090_ldo_ops), + tps65090_REG_DESC(LDO1, "vsys-l1", 0, tps65090_ldo_ops), + tps65090_REG_DESC(LDO2, "vsys-l2", 0, tps65090_ldo_ops), }; static inline bool is_dcdc(int id) @@ -138,6 +140,92 @@ static void tps65090_configure_regulator_config( } } +#ifdef CONFIG_OF +static struct of_regulator_match tps65090_matches[] = { + { .name = "dcdc1", }, + { .name = "dcdc2", }, + { .name = "dcdc3", }, + { .name = "fet1", }, + { .name = "fet2", }, + { .name = "fet3", }, + { .name = "fet4", }, + { .name = "fet5", }, + { .name = "fet6", }, + { .name = "fet7", }, + { .name = "ldo1", }, + { .name = "ldo2", }, +}; + +static struct tps65090_platform_data *tps65090_parse_dt_reg_data( + struct platform_device *pdev, + struct of_regulator_match **tps65090_reg_matches) +{ + struct tps65090_platform_data *tps65090_pdata; + struct device_node *np = pdev->dev.parent->of_node; + struct device_node *regulators; + int idx = 0, ret; + struct tps65090_regulator_plat_data *reg_pdata; + + tps65090_pdata = devm_kzalloc(&pdev->dev, sizeof(*tps65090_pdata), + GFP_KERNEL); + if (!tps65090_pdata) { + dev_err(&pdev->dev, "Memory alloc for tps65090_pdata failed\n"); + return ERR_PTR(-ENOMEM); + } + + reg_pdata = devm_kzalloc(&pdev->dev, TPS65090_REGULATOR_MAX * + sizeof(*reg_pdata), GFP_KERNEL); + if (!reg_pdata) { + dev_err(&pdev->dev, "Memory alloc for reg_pdata failed\n"); + return ERR_PTR(-ENOMEM); + } + + regulators = of_find_node_by_name(np, "regulators"); + if (!regulators) { + dev_err(&pdev->dev, "regulator node not found\n"); + return ERR_PTR(-ENODEV); + } + + ret = of_regulator_match(&pdev->dev, regulators, tps65090_matches, + ARRAY_SIZE(tps65090_matches)); + if (ret < 0) { + dev_err(&pdev->dev, + "Error parsing regulator init data: %d\n", ret); + return ERR_PTR(ret); + } + + *tps65090_reg_matches = tps65090_matches; + for (idx = 0; idx < ARRAY_SIZE(tps65090_matches); idx++) { + struct regulator_init_data *ri_data; + struct tps65090_regulator_plat_data *rpdata; + + rpdata = ®_pdata[idx]; + ri_data = tps65090_matches[idx].init_data; + if (!ri_data || !tps65090_matches[idx].of_node) + continue; + + rpdata->reg_init_data = ri_data; + rpdata->enable_ext_control = of_property_read_bool( + tps65090_matches[idx].of_node, + "ti,enable-ext-control"); + if (rpdata->enable_ext_control) + rpdata->gpio = of_get_named_gpio(np, + "dcdc-ext-control-gpios", 0); + + tps65090_pdata->reg_pdata[idx] = rpdata; + } + return tps65090_pdata; +} +#else +static inline struct tps65090_platform_data *tps65090_parse_dt_reg_data( + struct platform_device *pdev, + struct of_regulator_match **tps65090_reg_matches) +{ + *tps65090_reg_matches = NULL; + return NULL; +} +#endif + static int tps65090_regulator_probe(struct platform_device *pdev) { struct tps65090 *tps65090_mfd = dev_get_drvdata(pdev->dev.parent); @@ -147,15 +235,19 @@ static int tps65090_regulator_probe(struct platform_device *pdev) struct tps65090_regulator_plat_data *tps_pdata; struct tps65090_regulator *pmic; struct tps65090_platform_data *tps65090_pdata; + struct of_regulator_match *tps65090_reg_matches = NULL; int num; int ret; dev_dbg(&pdev->dev, "Probing regulator\n"); tps65090_pdata = dev_get_platdata(pdev->dev.parent); - if (!tps65090_pdata) { + if (!tps65090_pdata && tps65090_mfd->dev->of_node) + tps65090_pdata = tps65090_parse_dt_reg_data(pdev, + &tps65090_reg_matches); + if (IS_ERR_OR_NULL(tps65090_pdata)) { dev_err(&pdev->dev, "Platform data missing\n"); - return -EINVAL; + return tps65090_pdata ? PTR_ERR(tps65090_pdata) : -EINVAL; } pmic = devm_kzalloc(&pdev->dev, TPS65090_REGULATOR_MAX * sizeof(*pmic), @@ -192,13 +284,17 @@ static int tps65090_regulator_probe(struct platform_device *pdev) } } - config.dev = &pdev->dev; + config.dev = pdev->dev.parent; config.driver_data = ri; config.regmap = tps65090_mfd->rmap; if (tps_pdata) config.init_data = tps_pdata->reg_init_data; else config.init_data = NULL; + if (tps65090_reg_matches) + config.of_node = tps65090_reg_matches[num].of_node; + else + config.of_node = NULL; rdev = regulator_register(ri->desc, &config); if (IS_ERR(rdev)) { diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c index f86da672c758..e68382d0e1ea 100644 --- a/drivers/regulator/tps6586x-regulator.c +++ b/drivers/regulator/tps6586x-regulator.c @@ -61,10 +61,6 @@ struct tps6586x_regulator { int enable_bit[2]; int enable_reg[2]; - - /* for DVM regulators */ - int go_reg; - int go_bit; }; static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev) @@ -72,37 +68,10 @@ static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev) return rdev_get_dev(rdev)->parent; } -static int tps6586x_set_voltage_sel(struct regulator_dev *rdev, - unsigned selector) -{ - struct tps6586x_regulator *ri = rdev_get_drvdata(rdev); - struct device *parent = to_tps6586x_dev(rdev); - int ret, val, rid = rdev_get_id(rdev); - uint8_t mask; - - val = selector << (ffs(rdev->desc->vsel_mask) - 1); - mask = rdev->desc->vsel_mask; - - ret = tps6586x_update(parent, rdev->desc->vsel_reg, val, mask); - if (ret) - return ret; - - /* Update go bit for DVM regulators */ - switch (rid) { - case TPS6586X_ID_LDO_2: - case TPS6586X_ID_LDO_4: - case TPS6586X_ID_SM_0: - case TPS6586X_ID_SM_1: - ret = tps6586x_set_bits(parent, ri->go_reg, 1 << ri->go_bit); - break; - } - return ret; -} - static struct regulator_ops tps6586x_regulator_ops = { .list_voltage = regulator_list_voltage_table, .get_voltage_sel = regulator_get_voltage_sel_regmap, - .set_voltage_sel = tps6586x_set_voltage_sel, + .set_voltage_sel = regulator_set_voltage_sel_regmap, .is_enabled = regulator_is_enabled_regmap, .enable = regulator_enable_regmap, @@ -142,7 +111,7 @@ static const unsigned int tps6586x_dvm_voltages[] = { }; #define TPS6586X_REGULATOR(_id, _pin_name, vdata, vreg, shift, nbits, \ - ereg0, ebit0, ereg1, ebit1) \ + ereg0, ebit0, ereg1, ebit1, goreg, gobit) \ .desc = { \ .supply_name = _pin_name, \ .name = "REG-" #_id, \ @@ -156,29 +125,26 @@ static const unsigned int tps6586x_dvm_voltages[] = { .enable_mask = 1 << (ebit0), \ .vsel_reg = TPS6586X_##vreg, \ .vsel_mask = ((1 << (nbits)) - 1) << (shift), \ + .apply_reg = (goreg), \ + .apply_bit = (gobit), \ }, \ .enable_reg[0] = TPS6586X_SUPPLY##ereg0, \ .enable_bit[0] = (ebit0), \ .enable_reg[1] = TPS6586X_SUPPLY##ereg1, \ .enable_bit[1] = (ebit1), -#define TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \ - .go_reg = TPS6586X_##goreg, \ - .go_bit = (gobit), - #define TPS6586X_LDO(_id, _pname, vdata, vreg, shift, nbits, \ ereg0, ebit0, ereg1, ebit1) \ { \ TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits, \ - ereg0, ebit0, ereg1, ebit1) \ + ereg0, ebit0, ereg1, ebit1, 0, 0) \ } #define TPS6586X_DVM(_id, _pname, vdata, vreg, shift, nbits, \ ereg0, ebit0, ereg1, ebit1, goreg, gobit) \ { \ TPS6586X_REGULATOR(_id, _pname, vdata, vreg, shift, nbits, \ - ereg0, ebit0, ereg1, ebit1) \ - TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \ + ereg0, ebit0, ereg1, ebit1, goreg, gobit) \ } #define TPS6586X_SYS_REGULATOR() \ @@ -207,13 +173,13 @@ static struct tps6586x_regulator tps6586x_regulator[] = { TPS6586X_LDO(SM_2, "vin-sm2", sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7), TPS6586X_DVM(LDO_2, "vinldo23", dvm, LDO2BV1, 0, 5, ENA, 3, - ENB, 3, VCC2, 6), + ENB, 3, TPS6586X_VCC2, BIT(6)), TPS6586X_DVM(LDO_4, "vinldo4", ldo4, LDO4V1, 0, 5, ENC, 3, - END, 3, VCC1, 6), + END, 3, TPS6586X_VCC1, BIT(6)), TPS6586X_DVM(SM_0, "vin-sm0", dvm, SM0V1, 0, 5, ENA, 1, - ENB, 1, VCC1, 2), + ENB, 1, TPS6586X_VCC1, BIT(2)), TPS6586X_DVM(SM_1, "vin-sm1", dvm, SM1V1, 0, 5, ENA, 0, - ENB, 0, VCC1, 0), + ENB, 0, TPS6586X_VCC1, BIT(0)), }; /* diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c index b0e4c0bc85c3..6ba6931ac855 100644 --- a/drivers/regulator/tps65910-regulator.c +++ b/drivers/regulator/tps65910-regulator.c @@ -964,8 +964,7 @@ static struct tps65910_board *tps65910_parse_dt_reg_data( { struct tps65910_board *pmic_plat_data; struct tps65910 *tps65910 = dev_get_drvdata(pdev->dev.parent); - struct device_node *np = pdev->dev.parent->of_node; - struct device_node *regulators; + struct device_node *np, *regulators; struct of_regulator_match *matches; unsigned int prop; int idx = 0, ret, count; @@ -978,6 +977,7 @@ static struct tps65910_board *tps65910_parse_dt_reg_data( return NULL; } + np = of_node_get(pdev->dev.parent->of_node); regulators = of_find_node_by_name(np, "regulators"); if (!regulators) { dev_err(&pdev->dev, "regulator node not found\n"); @@ -994,11 +994,13 @@ static struct tps65910_board *tps65910_parse_dt_reg_data( matches = tps65911_matches; break; default: + of_node_put(regulators); dev_err(&pdev->dev, "Invalid tps chip version\n"); return NULL; } ret = of_regulator_match(&pdev->dev, regulators, matches, count); + of_node_put(regulators); if (ret < 0) { dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", ret); diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h index b50c38f8bc48..f0f4de3b4ccc 100644 --- a/include/linux/mfd/samsung/core.h +++ b/include/linux/mfd/samsung/core.h @@ -26,6 +26,7 @@ enum sec_device_type { /** * struct sec_pmic_dev - s5m87xx master device for sub-drivers * @dev: master device of the chip (can be used to access platform data) + * @pdata: pointer to private data used to pass platform data to child * @i2c: i2c client private data for regulator * @rtc: i2c client private data for rtc * @iolock: mutex for serializing io access @@ -39,6 +40,7 @@ enum sec_device_type { */ struct sec_pmic_dev { struct device *dev; + struct sec_platform_data *pdata; struct regmap *regmap; struct i2c_client *i2c; struct i2c_client *rtc; @@ -82,11 +84,11 @@ struct sec_platform_data { int buck_gpios[3]; int buck_ds[3]; - int buck2_voltage[8]; + unsigned int buck2_voltage[8]; bool buck2_gpiodvs; - int buck3_voltage[8]; + unsigned int buck3_voltage[8]; bool buck3_gpiodvs; - int buck4_voltage[8]; + unsigned int buck4_voltage[8]; bool buck4_gpiodvs; int buck_set1; @@ -127,6 +129,7 @@ struct sec_platform_data { struct sec_regulator_data { int id; struct regulator_init_data *initdata; + struct device_node *reg_node; }; /* @@ -136,7 +139,7 @@ struct sec_regulator_data { */ struct sec_opmode_data { int id; - int mode; + unsigned int mode; }; /* diff --git a/include/linux/platform_data/lp8755.h b/include/linux/platform_data/lp8755.h new file mode 100644 index 000000000000..a7fd0776c9bf --- /dev/null +++ b/include/linux/platform_data/lp8755.h @@ -0,0 +1,71 @@ +/* + * LP8755 High Performance Power Management Unit Driver:System Interface Driver + * + * Copyright (C) 2012 Texas Instruments + * + * Author: Daniel(Geon Si) Jeong + * G.Shark Jeong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _LP8755_H +#define _LP8755_H + +#include + +#define LP8755_NAME "lp8755-regulator" +/* + *PWR FAULT : power fault detected + *OCP : over current protect activated + *OVP : over voltage protect activated + *TEMP_WARN : thermal warning + *TEMP_SHDN : thermal shutdonw detected + *I_LOAD : current measured + */ +#define LP8755_EVENT_PWR_FAULT REGULATOR_EVENT_FAIL +#define LP8755_EVENT_OCP REGULATOR_EVENT_OVER_CURRENT +#define LP8755_EVENT_OVP 0x10000 +#define LP8755_EVENT_TEMP_WARN 0x2000 +#define LP8755_EVENT_TEMP_SHDN REGULATOR_EVENT_OVER_TEMP +#define LP8755_EVENT_I_LOAD 0x40000 + +enum lp8755_bucks { + LP8755_BUCK0 = 0, + LP8755_BUCK1, + LP8755_BUCK2, + LP8755_BUCK3, + LP8755_BUCK4, + LP8755_BUCK5, + LP8755_BUCK_MAX, +}; + +/** + * multiphase configuration options + */ +enum lp8755_mphase_config { + MPHASE_CONF0, + MPHASE_CONF1, + MPHASE_CONF2, + MPHASE_CONF3, + MPHASE_CONF4, + MPHASE_CONF5, + MPHASE_CONF6, + MPHASE_CONF7, + MPHASE_CONF8, + MPHASE_CONF_MAX +}; + +/** + * struct lp8755_platform_data + * @mphase_type : Multiphase Switcher Configurations. + * @buck_data : buck0~6 init voltage in uV + */ +struct lp8755_platform_data { + int mphase; + struct regulator_init_data *buck_data[LP8755_BUCK_MAX]; +}; +#endif diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index d10bb0f39c5e..23070fd83872 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -193,6 +193,10 @@ enum regulator_type { * * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_ * @vsel_mask: Mask for register bitfield used for selector + * @apply_reg: Register for initiate voltage change on the output when + * using regulator_set_voltage_sel_regmap + * @apply_bit: Register bitfield used for initiate voltage change on the + * output when using regulator_set_voltage_sel_regmap * @enable_reg: Register for control when using regmap enable/disable ops * @enable_mask: Mask for control when using regmap enable/disable ops * @@ -218,6 +222,8 @@ struct regulator_desc { unsigned int vsel_reg; unsigned int vsel_mask; + unsigned int apply_reg; + unsigned int apply_bit; unsigned int enable_reg; unsigned int enable_mask; unsigned int bypass_reg; diff --git a/sound/soc/codecs/wm5102.c b/sound/soc/codecs/wm5102.c index 1440b3f9b7bb..988e817dca05 100644 --- a/sound/soc/codecs/wm5102.c +++ b/sound/soc/codecs/wm5102.c @@ -1152,6 +1152,8 @@ SND_SOC_DAPM_OUTPUT("SPKOUTRN"), SND_SOC_DAPM_OUTPUT("SPKOUTRP"), SND_SOC_DAPM_OUTPUT("SPKDAT1L"), SND_SOC_DAPM_OUTPUT("SPKDAT1R"), + +SND_SOC_DAPM_OUTPUT("MICSUPP"), }; #define ARIZONA_MIXER_INPUT_ROUTES(name) \ @@ -1364,6 +1366,8 @@ static const struct snd_soc_dapm_route wm5102_dapm_routes[] = { { "AEC Loopback", "SPKDAT1R", "OUT5R" }, { "SPKDAT1L", NULL, "OUT5L" }, { "SPKDAT1R", NULL, "OUT5R" }, + + { "MICSUPP", NULL, "SYSCLK" }, }; static int wm5102_set_fll(struct snd_soc_codec *codec, int fll_id, int source, diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index 7a090968c4f7..0320a32670d3 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -624,6 +624,8 @@ SND_SOC_DAPM_OUTPUT("SPKDAT1L"), SND_SOC_DAPM_OUTPUT("SPKDAT1R"), SND_SOC_DAPM_OUTPUT("SPKDAT2L"), SND_SOC_DAPM_OUTPUT("SPKDAT2R"), + +SND_SOC_DAPM_OUTPUT("MICSUPP"), }; #define ARIZONA_MIXER_INPUT_ROUTES(name) \ @@ -832,6 +834,8 @@ static const struct snd_soc_dapm_route wm5110_dapm_routes[] = { { "SPKDAT2L", NULL, "OUT6L" }, { "SPKDAT2R", NULL, "OUT6R" }, + + { "MICSUPP", NULL, "SYSCLK" }, }; static int wm5110_set_fll(struct snd_soc_codec *codec, int fll_id, int source,