MIPS: Move device-trees into vendor sub-directories

Move the MIPS device-trees into the appropriate vendor sub-directories.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Tested-by: Kevin Cernekee <cernekee@gmail.com>
Cc: f.fainelli@gmail.com
Cc: jaedon.shin@gmail.com
Cc: tglx@linutronix.de
Cc: jason@lakedaemon.net
Cc: jogo@openwrt.org
Cc: arnd@arndb.de
Cc: computersforpeace@gmail.com
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/8835/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/Makefile

@@ -365,7 +365,7 @@ core-$(CONFIG_BUILTIN_DTB) += arch/mips/boot/dts/
 
 PHONY += dtbs
 dtbs: scripts
-	$(Q)$(MAKE) $(build)=arch/mips/boot/dts dtbs
+	$(Q)$(MAKE) $(build)=arch/mips/boot/dts
 
 archprepare:
 ifdef CONFIG_MIPS32_N32

arch/mips/boot/dts/Makefile

@@ -1,21 +1,12 @@
-dtb-$(CONFIG_BCM3384)			+= bcm93384wvg.dtb
-dtb-$(CONFIG_CAVIUM_OCTEON_SOC)		+= octeon_3xxx.dtb octeon_68xx.dtb
-dtb-$(CONFIG_DT_EASY50712)		+= easy50712.dtb
-dtb-$(CONFIG_DT_XLP_EVP)		+= xlp_evp.dtb
-dtb-$(CONFIG_DT_XLP_SVP)		+= xlp_svp.dtb
-dtb-$(CONFIG_DT_XLP_FVP)		+= xlp_fvp.dtb
-dtb-$(CONFIG_DT_XLP_GVP)		+= xlp_gvp.dtb
-dtb-$(CONFIG_DTB_RT2880_EVAL)		+= rt2880_eval.dtb
-dtb-$(CONFIG_DTB_RT305X_EVAL)		+= rt3052_eval.dtb
-dtb-$(CONFIG_DTB_RT3883_EVAL)		+= rt3883_eval.dtb
-dtb-$(CONFIG_DTB_MT7620A_EVAL)		+= mt7620a_eval.dtb
-dtb-$(CONFIG_MIPS_SEAD3)		+= sead3.dtb
+dts-dirs	+= brcm
+dts-dirs	+= cavium-octeon
+dts-dirs	+= lantiq
+dts-dirs	+= mti
+dts-dirs	+= netlogic
+dts-dirs	+= ralink
 
-obj-y		+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+obj-y		:= $(addsuffix /, $(dts-dirs))
 
-targets		+= dtbs
-targets		+= $(dtb-y)
-
-dtbs: $(addprefix $(obj)/, $(dtb-y))
-
-clean-files	+= *.dtb *.dtb.S
+always		:= $(dtb-y)
+subdir-y	:= $(dts-dirs)
+clean-files	:= *.dtb *.dtb.S

arch/mips/boot/dts/brcm/Makefile

@@ -0,0 +1,9 @@
+dtb-$(CONFIG_BCM3384)		+= bcm93384wvg.dtb
+
+obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj-				+= dummy.o
+
+always				:= $(dtb-y)
+clean-files			:= *.dtb *.dtb.S

arch/mips/boot/dts/cavium-octeon/Makefile

@@ -0,0 +1,9 @@
+dtb-$(CONFIG_CAVIUM_OCTEON_SOC)	+= octeon_3xxx.dtb octeon_68xx.dtb
+
+obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj-				+= dummy.o
+
+always				:= $(dtb-y)
+clean-files			:= *.dtb *.dtb.S

arch/mips/boot/dts/lantiq/Makefile

@@ -0,0 +1,9 @@
+dtb-$(CONFIG_DT_EASY50712)	+= easy50712.dtb
+
+obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj-				+= dummy.o
+
+always				:= $(dtb-y)
+clean-files			:= *.dtb *.dtb.S

arch/mips/boot/dts/mti/Makefile

@@ -0,0 +1,9 @@
+dtb-$(CONFIG_MIPS_SEAD3)	+= sead3.dtb
+
+obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj-				+= dummy.o
+
+always				:= $(dtb-y)
+clean-files			:= *.dtb *.dtb.S

arch/mips/boot/dts/netlogic/Makefile

@@ -0,0 +1,12 @@
+dtb-$(CONFIG_DT_XLP_EVP)	+= xlp_evp.dtb
+dtb-$(CONFIG_DT_XLP_SVP)	+= xlp_svp.dtb
+dtb-$(CONFIG_DT_XLP_FVP)	+= xlp_fvp.dtb
+dtb-$(CONFIG_DT_XLP_GVP)	+= xlp_gvp.dtb
+
+obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj-				+= dummy.o
+
+always				:= $(dtb-y)
+clean-files			:= *.dtb *.dtb.S

arch/mips/boot/dts/ralink/Makefile

@@ -0,0 +1,12 @@
+dtb-$(CONFIG_DTB_RT2880_EVAL)	+= rt2880_eval.dtb
+dtb-$(CONFIG_DTB_RT305X_EVAL)	+= rt3052_eval.dtb
+dtb-$(CONFIG_DTB_RT3883_EVAL)	+= rt3883_eval.dtb
+dtb-$(CONFIG_DTB_MT7620A_EVAL)	+= mt7620a_eval.dtb
+
+obj-y				+= $(patsubst %.dtb, %.dtb.o, $(dtb-y))
+
+# Force kbuild to make empty built-in.o if necessary
+obj-				+= dummy.o
+
+always				:= $(dtb-y)
+clean-files			:= *.dtb *.dtb.S