m68knommu: clean up ColdFire cache control code
The cache control code for the ColdFire CPU's is a big ugly mess of "#ifdef"ery liberally coated with bit constants. Clean it up. The cache controllers in the various ColdFire parts are actually quite similar. Just differing in some bit flags and options supported. Using the header defines now in place it is pretty easy to factor out the small differences and use common setup and flush/invalidate code. I have preserved the cache setups as they where in the old code (except where obviously wrong - like in the case of the 5249). Following from this it should be easy now to extend the possible setups used on the CACHE controllers that support split cacheing or copy-back or write through options. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
This commit is contained in:
parent
3d461401eb
commit
8ce877a8eb
|
@ -2,7 +2,7 @@
|
|||
#define _M68KNOMMU_CACHEFLUSH_H
|
||||
|
||||
/*
|
||||
* (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com>
|
||||
* (C) Copyright 2000-2010, Greg Ungerer <gerg@snapgear.com>
|
||||
*/
|
||||
#include <linux/mm.h>
|
||||
#include <asm/mcfsim.h>
|
||||
|
@ -10,7 +10,7 @@
|
|||
#define flush_cache_all() __flush_cache_all()
|
||||
#define flush_cache_mm(mm) do { } while (0)
|
||||
#define flush_cache_dup_mm(mm) do { } while (0)
|
||||
#define flush_cache_range(vma, start, end) __flush_cache_all()
|
||||
#define flush_cache_range(vma, start, end) do { } while (0)
|
||||
#define flush_cache_page(vma, vmaddr) do { } while (0)
|
||||
#ifndef flush_dcache_range
|
||||
#define flush_dcache_range(start,len) __flush_cache_all()
|
||||
|
@ -33,41 +33,13 @@
|
|||
#ifndef __flush_cache_all
|
||||
static inline void __flush_cache_all(void)
|
||||
{
|
||||
#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
|
||||
#ifdef CACHE_INVALIDATE
|
||||
__asm__ __volatile__ (
|
||||
"movel #0x81400110, %%d0\n\t"
|
||||
"movel %0, %%d0\n\t"
|
||||
"movec %%d0, %%CACR\n\t"
|
||||
"nop\n\t"
|
||||
: : : "d0" );
|
||||
#endif /* CONFIG_M523x || CONFIG_M527x */
|
||||
#if defined(CONFIG_M528x)
|
||||
__asm__ __volatile__ (
|
||||
"movel #0x81000200, %%d0\n\t"
|
||||
"movec %%d0, %%CACR\n\t"
|
||||
"nop\n\t"
|
||||
: : : "d0" );
|
||||
#endif /* CONFIG_M528x */
|
||||
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
|
||||
__asm__ __volatile__ (
|
||||
"movel #0x81000100, %%d0\n\t"
|
||||
"movec %%d0, %%CACR\n\t"
|
||||
"nop\n\t"
|
||||
: : : "d0" );
|
||||
#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
|
||||
#ifdef CONFIG_M5249
|
||||
__asm__ __volatile__ (
|
||||
"movel #0xa1000200, %%d0\n\t"
|
||||
"movec %%d0, %%CACR\n\t"
|
||||
"nop\n\t"
|
||||
: : : "d0" );
|
||||
#endif /* CONFIG_M5249 */
|
||||
#ifdef CONFIG_M532x
|
||||
__asm__ __volatile__ (
|
||||
"movel #0x81000210, %%d0\n\t"
|
||||
"movec %%d0, %%CACR\n\t"
|
||||
"nop\n\t"
|
||||
: : : "d0" );
|
||||
#endif /* CONFIG_M532x */
|
||||
: : "i" (CACHE_INVALIDATE) : "d0" );
|
||||
#endif
|
||||
}
|
||||
#endif /* __flush_cache_all */
|
||||
|
||||
|
|
|
@ -52,5 +52,32 @@
|
|||
#define ACR_BWE 0x00000020 /* Write buffer enabled */
|
||||
#define ACR_WPROTECT 0x00000004 /* Write protect region */
|
||||
|
||||
/*
|
||||
* Set the cache controller settings we will use. This code is set to
|
||||
* only use the instruction cache, even on the controllers that support
|
||||
* split cache. (This setup is trying to preserve the existing behavior
|
||||
* for now, in the furture I hope to actually use the split cache mode).
|
||||
*/
|
||||
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \
|
||||
defined(CONFIG_M5249) || defined(CONFIG_M5272)
|
||||
#define CACHE_INIT (CACR_CINV)
|
||||
#define CACHE_MODE (CACR_CENB + CACR_DCM)
|
||||
#else
|
||||
#ifdef CONFIG_COLDFIRE_SW_A7
|
||||
#define CACHE_INIT (CACR_CINV + CACR_DISD)
|
||||
#define CACHE_MODE (CACR_CENB + CACR_DISD + CACR_DCM)
|
||||
#else
|
||||
#define CACHE_INIT (CACR_CINV + CACR_DISD + CACR_EUSP)
|
||||
#define CACHE_MODE (CACR_CENB + CACR_DISD + CACR_DCM + CACR_EUSP)
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#define CACHE_INVALIDATE (CACHE_MODE + CACR_CINV)
|
||||
|
||||
#define ACR0_MODE ((CONFIG_RAMBASE & 0xff000000) + \
|
||||
(0x000f0000) + \
|
||||
(ACR_ENABLE + ACR_ANY + ACR_CENB + ACR_BWE))
|
||||
#define ACR1_MODE 0
|
||||
|
||||
/****************************************************************************/
|
||||
#endif /* m52xxsim_h */
|
||||
|
|
|
@ -48,5 +48,23 @@
|
|||
#define ACR_CM_IMPRE 0x00000060 /* Cache inhibited, imprecise */
|
||||
#define ACR_WPROTECT 0x00000004 /* Write protect region */
|
||||
|
||||
/*
|
||||
* Set the cache controller settings we will use. This default in the
|
||||
* CACR is cache inhibited, we use the ACR register to set cacheing
|
||||
* enabled on the regions we want (eg RAM).
|
||||
*/
|
||||
#ifdef CONFIG_COLDFIRE_SW_A7
|
||||
#define CACHE_MODE (CACR_EC + CACR_ESB + CACR_DCM_PRE)
|
||||
#else
|
||||
#define CACHE_MODE (CACR_EC + CACR_ESB + CACR_DCM_PRE + CACR_EUSP)
|
||||
#endif
|
||||
|
||||
#define CACHE_INIT CACR_CINVA
|
||||
|
||||
#define ACR0_MODE ((CONFIG_RAMBASE & 0xff000000) + \
|
||||
(0x000f0000) + \
|
||||
(ACR_ENABLE + ACR_ANY + ACR_CM_CB))
|
||||
#define ACR1_MODE 0
|
||||
|
||||
/****************************************************************************/
|
||||
#endif /* m53xxsim_h */
|
||||
|
|
|
@ -73,11 +73,16 @@
|
|||
#else
|
||||
#define CACHE_MODE (CACR_DEC+CACR_DESB+CACR_DDCM_P+CACR_BEC+CACR_IEC+CACR_EUSP)
|
||||
#endif
|
||||
|
||||
#define DATA_CACHE_MODE (ACR_ENABLE+ACR_ANY+ACR_CM_WT)
|
||||
|
||||
#define INSN_CACHE_MODE (ACR_ENABLE+ACR_ANY)
|
||||
|
||||
#define CACHE_INIT (CACR_DCINVA+CACR_BCINVA+CACR_ICINVA)
|
||||
#define CACHE_INVALIDATE (CACHE_MODE+CACR_DCINVA+CACR_BCINVA+CACR_ICINVA)
|
||||
#define ACR0_MODE (0x000f0000+DATA_CACHE_MODE)
|
||||
#define ACR1_MODE 0
|
||||
#define ACR2_MODE (0x000f0000+INSN_CACHE_MODE)
|
||||
#define ACR3_MODE 0
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#if ((DATA_CACHE_MODE & ACR_CM) == ACR_CM_WT)
|
||||
|
@ -112,7 +117,7 @@ static inline void __m54xx_flush_cache_all(void)
|
|||
: "i" (CACHE_LINE_SIZE),
|
||||
"i" (DCACHE_SIZE / CACHE_WAYS),
|
||||
"i" (CACHE_WAYS),
|
||||
"i" (CACHE_MODE|CACR_DCINVA|CACR_BCINVA|CACR_ICINVA)
|
||||
"i" (CACHE_INVALIDATE)
|
||||
: "d0", "a0" );
|
||||
}
|
||||
|
||||
|
|
|
@ -1,150 +0,0 @@
|
|||
/****************************************************************************/
|
||||
|
||||
/*
|
||||
* mcfcache.h -- ColdFire CPU cache support code
|
||||
*
|
||||
* (C) Copyright 2004, Greg Ungerer <gerg@snapgear.com>
|
||||
*/
|
||||
|
||||
/****************************************************************************/
|
||||
#ifndef __M68KNOMMU_MCFCACHE_H
|
||||
#define __M68KNOMMU_MCFCACHE_H
|
||||
/****************************************************************************/
|
||||
|
||||
|
||||
/*
|
||||
* The different ColdFire families have different cache arrangments.
|
||||
* Everything from a small instruction only cache, to configurable
|
||||
* data and/or instruction cache, to unified instruction/data, to
|
||||
* harvard style separate instruction and data caches.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
|
||||
/*
|
||||
* Simple version 2 core cache. These have instruction cache only,
|
||||
* we just need to invalidate it and enable it.
|
||||
*/
|
||||
.macro CACHE_ENABLE
|
||||
movel #0x01000000,%d0 /* invalidate cache cmd */
|
||||
movec %d0,%CACR /* do invalidate cache */
|
||||
movel #0x80000100,%d0 /* setup cache mask */
|
||||
movec %d0,%CACR /* enable cache */
|
||||
.endm
|
||||
#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
|
||||
|
||||
#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
|
||||
/*
|
||||
* New version 2 cores have a configurable split cache arrangement.
|
||||
* For now I am just enabling instruction cache - but ultimately I
|
||||
* think a split instruction/data cache would be better.
|
||||
*/
|
||||
.macro CACHE_ENABLE
|
||||
movel #0x01400000,%d0
|
||||
movec %d0,%CACR /* invalidate cache */
|
||||
nop
|
||||
movel #0x0000c000,%d0 /* set SDRAM cached only */
|
||||
movec %d0,%ACR0
|
||||
movel #0x00000000,%d0 /* no other regions cached */
|
||||
movec %d0,%ACR1
|
||||
movel #0x80400110,%d0 /* configure cache */
|
||||
movec %d0,%CACR /* enable cache */
|
||||
nop
|
||||
.endm
|
||||
#endif /* CONFIG_M523x || CONFIG_M527x */
|
||||
|
||||
#if defined(CONFIG_M528x)
|
||||
.macro CACHE_ENABLE
|
||||
nop
|
||||
movel #0x01000000, %d0
|
||||
movec %d0, %CACR /* Invalidate cache */
|
||||
nop
|
||||
movel #0x0000c020, %d0 /* Set SDRAM cached only */
|
||||
movec %d0, %ACR0
|
||||
movel #0x00000000, %d0 /* No other regions cached */
|
||||
movec %d0, %ACR1
|
||||
movel #0x80000200, %d0 /* Setup cache mask */
|
||||
movec %d0, %CACR /* Enable cache */
|
||||
nop
|
||||
.endm
|
||||
#endif /* CONFIG_M528x */
|
||||
|
||||
#if defined(CONFIG_M5249) || defined(CONFIG_M5307)
|
||||
/*
|
||||
* The version 3 core cache. Oddly enough the version 2 core 5249
|
||||
* has the same SDRAM and cache setup as the version 3 cores.
|
||||
* This is a single unified instruction/data cache.
|
||||
*/
|
||||
.macro CACHE_ENABLE
|
||||
movel #0x01000000,%d0 /* invalidate whole cache */
|
||||
movec %d0,%CACR
|
||||
nop
|
||||
#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3)
|
||||
movel #0x0000c000,%d0 /* set SDRAM cached (write-thru) */
|
||||
#else
|
||||
movel #0x0000c020,%d0 /* set SDRAM cached (copyback) */
|
||||
#endif
|
||||
movec %d0,%ACR0
|
||||
movel #0x00000000,%d0 /* no other regions cached */
|
||||
movec %d0,%ACR1
|
||||
movel #0xa0000200,%d0 /* enable cache */
|
||||
movec %d0,%CACR
|
||||
nop
|
||||
.endm
|
||||
#endif /* CONFIG_M5249 || CONFIG_M5307 */
|
||||
|
||||
#if defined(CONFIG_M532x)
|
||||
.macro CACHE_ENABLE
|
||||
movel #0x01000000,%d0 /* invalidate cache cmd */
|
||||
movec %d0,%CACR /* do invalidate cache */
|
||||
nop
|
||||
movel #0x4001C000,%d0 /* set SDRAM cached (write-thru) */
|
||||
movec %d0,%ACR0
|
||||
movel #0x00000000,%d0 /* no other regions cached */
|
||||
movec %d0,%ACR1
|
||||
movel #0x80000210,%d0 /* setup cache mask */
|
||||
movec %d0,%CACR /* enable cache */
|
||||
nop
|
||||
.endm
|
||||
#endif /* CONFIG_M532x */
|
||||
|
||||
#if defined(CONFIG_M5407) || defined(CONFIG_M54xx)
|
||||
|
||||
.macro CACHE_ENABLE
|
||||
/* invalidate whole cache */
|
||||
movel #(CACR_DCINVA+CACR_BCINVA+CACR_ICINVA),%d0
|
||||
movec %d0,%CACR
|
||||
nop
|
||||
/* addresses range for data cache : 0x00000000-0x0fffffff */
|
||||
movel #(0x000f0000+DATA_CACHE_MODE),%d0 /* set SDRAM cached */
|
||||
movec %d0, %ACR0
|
||||
movel #0x00000000,%d0 /* no other regions cached */
|
||||
movec %d0, %ACR1
|
||||
/* addresses range for instruction cache : 0x00000000-0x0fffffff */
|
||||
movel #(0x000f0000+INSN_CACHE_MODE),%d0 /* set SDRAM cached */
|
||||
movec %d0, %ACR2
|
||||
movel #0x00000000,%d0 /* no other regions cached */
|
||||
movec %d0, %ACR3
|
||||
/* enable caches */
|
||||
movel #(CACHE_MODE),%d0
|
||||
movec %d0,%CACR
|
||||
nop
|
||||
.endm
|
||||
#endif /* CONFIG_M5407 || CONFIG_M54xx */
|
||||
|
||||
#if defined(CONFIG_M520x)
|
||||
.macro CACHE_ENABLE
|
||||
move.l #0x01000000,%d0 /* invalidate whole cache */
|
||||
movec %d0,%CACR
|
||||
nop
|
||||
move.l #0x0000c000,%d0 /* set SDRAM cached (write-thru) */
|
||||
movec %d0,%ACR0
|
||||
move.l #0x00000000,%d0 /* no other regions cached */
|
||||
movec %d0,%ACR1
|
||||
move.l #0x80400010,%d0 /* enable 8K instruction cache */
|
||||
movec %d0,%CACR
|
||||
nop
|
||||
.endm
|
||||
#endif /* CONFIG_M520x */
|
||||
|
||||
/****************************************************************************/
|
||||
#endif /* __M68KNOMMU_MCFCACHE_H */
|
|
@ -3,7 +3,7 @@
|
|||
/*
|
||||
* head.S -- common startup code for ColdFire CPUs.
|
||||
*
|
||||
* (C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com>.
|
||||
* (C) Copyright 1999-2010, Greg Ungerer <gerg@snapgear.com>.
|
||||
*/
|
||||
|
||||
/*****************************************************************************/
|
||||
|
@ -13,7 +13,6 @@
|
|||
#include <linux/init.h>
|
||||
#include <asm/asm-offsets.h>
|
||||
#include <asm/coldfire.h>
|
||||
#include <asm/mcfcache.h>
|
||||
#include <asm/mcfsim.h>
|
||||
#include <asm/thread_info.h>
|
||||
|
||||
|
@ -173,10 +172,27 @@ _start:
|
|||
|
||||
/*
|
||||
* Now that we know what the memory is, lets enable cache
|
||||
* and get things moving. This is Coldfire CPU specific.
|
||||
* and get things moving. This is Coldfire CPU specific. Not
|
||||
* all version cores have identical cache register setup. But
|
||||
* it is very similar. Define the exact settings in the headers
|
||||
* then the code here is the same for all.
|
||||
*/
|
||||
CACHE_ENABLE /* enable CPU cache */
|
||||
|
||||
movel #CACHE_INIT,%d0 /* invalidate whole cache */
|
||||
movec %d0,%CACR
|
||||
nop
|
||||
movel #ACR0_MODE,%d0 /* set RAM region for caching */
|
||||
movec %d0,%ACR0
|
||||
movel #ACR1_MODE,%d0 /* anything else to cache? */
|
||||
movec %d0,%ACR1
|
||||
#ifdef ACR2_MODE
|
||||
movel #ACR2_MODE,%d0
|
||||
movec %d0,%ACR2
|
||||
movel #ACR3_MODE,%d0
|
||||
movec %d0,%ACR3
|
||||
#endif
|
||||
movel #CACHE_MODE,%d0 /* enable cache */
|
||||
movec %d0,%CACR
|
||||
nop
|
||||
|
||||
#ifdef CONFIG_ROMFS_FS
|
||||
/*
|
||||
|
|
Loading…
Reference in a new issue