redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

w1: add family based automatic module loading 

This patch allows the 1-wire bus to autoload the corresponding module
for each slave being attached.
This works similar to bluetooth protocols.

Signed-off-by: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hifive-unleashed-5.1
Alexander Stein 2013-05-26 20:06:50 +02:00 committed by Greg Kroah-Hartman
parent a4b05d1262
commit 8d7bda5188
13 changed files with 20 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Documentation/w1/w1.generic
View File

@ -25,8 +25,8 @@ When a w1 master driver registers with the w1 subsystem, the following occurs:
- sysfs entries for that w1 master are created
- the w1 bus is periodically searched for new slave devices
When a device is found on the bus, w1 core checks if driver for its family is
loaded. If so, the family driver is attached to the slave.
When a device is found on the bus, w1 core tries to load the driver for its family
and check if it is loaded. If so, the family driver is attached to the slave.
If there is no driver for the family, default one is assigned, which allows to perform
almost any kind of operations. Each logical operation is a transaction
in nature, which can contain several (two or one) low-level operations.

1
drivers/w1/slaves/w1_ds2408.c
View File

@ -22,6 +22,7 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jean-Francois Dagenais <dagenaisj@sonatest.com>");
MODULE_DESCRIPTION("w1 family 29 driver for DS2408 8 Pin IO");
MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2408));
#define W1_F29_RETRIES 3

1
drivers/w1/slaves/w1_ds2413.c
View File

@ -23,6 +23,7 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mariusz Bialonczyk <manio@skyboo.net>");
MODULE_DESCRIPTION("w1 family 3a driver for DS2413 2 Pin IO");
MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2413));
#define W1_F3A_RETRIES 3
#define W1_F3A_FUNC_PIO_ACCESS_READ 0xF5

1
drivers/w1/slaves/w1_ds2423.c
View File

@ -164,3 +164,4 @@ module_exit(w1_f1d_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mika Laitio <lamikr@pilppa.org>");
MODULE_DESCRIPTION("w1 family 1d driver for DS2423, 4 counters and 4kb ram");
MODULE_ALIAS("w1-family-" __stringify(W1_COUNTER_DS2423));

1
drivers/w1/slaves/w1_ds2431.c
View File

@ -310,3 +310,4 @@ module_exit(w1_f2d_fini);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Bernhard Weirich <bernhard.weirich@riedel.net>");
MODULE_DESCRIPTION("w1 family 2d driver for DS2431, 1kb EEPROM");
MODULE_ALIAS("w1-family-" __stringify(W1_EEPROM_DS2431));

1
drivers/w1/slaves/w1_ds2433.c
View File

@ -29,6 +29,7 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>");
MODULE_DESCRIPTION("w1 family 23 driver for DS2433, 4kb EEPROM");
MODULE_ALIAS("w1-family-" __stringify(W1_EEPROM_DS2433));
#define W1_EEPROM_SIZE 512
#define W1_PAGE_COUNT 16

1
drivers/w1/slaves/w1_ds2760.c
View File

@ -203,3 +203,4 @@ module_exit(w1_ds2760_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>");
MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip");
MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2760));

1
drivers/w1/slaves/w1_ds2780.c
View File

@ -188,3 +188,4 @@ module_exit(w1_ds2780_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Clifton Barnes <cabarnes@indesign-llc.com>");
MODULE_DESCRIPTION("1-wire Driver for Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC");
MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2780));

1
drivers/w1/slaves/w1_ds2781.c
View File

@ -186,3 +186,4 @@ module_exit(w1_ds2781_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Renata Sayakhova <renata@oktetlabs.ru>");
MODULE_DESCRIPTION("1-wire Driver for Maxim/Dallas DS2781 Stand-Alone Fuel Gauge IC");
MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2781));

1
drivers/w1/slaves/w1_ds28e04.c
View File

@ -27,6 +27,7 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Markus Franke <franke.m@sebakmt.com>, <franm@hrz.tu-chemnitz.de>");
MODULE_DESCRIPTION("w1 family 1C driver for DS28E04, 4kb EEPROM and PIO");
MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS28E04));
/* Allow the strong pullup to be disabled, but default to enabled.
* If it was disabled a parasite powered device might not get the required

2
drivers/w1/slaves/w1_smem.c
View File

@ -34,6 +34,8 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol, 64bit memory family.");
MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_SMEM_01));
MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_SMEM_81));
static struct w1_family w1_smem_family_01 = {
.fid = W1_FAMILY_SMEM_01,

5
drivers/w1/slaves/w1_therm.c
View File

@ -36,6 +36,11 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol, temperature family.");
MODULE_ALIAS("w1-family-" __stringify(W1_THERM_DS18S20));
MODULE_ALIAS("w1-family-" __stringify(W1_THERM_DS1822));
MODULE_ALIAS("w1-family-" __stringify(W1_THERM_DS18B20));
MODULE_ALIAS("w1-family-" __stringify(W1_THERM_DS1825));
MODULE_ALIAS("w1-family-" __stringify(W1_THERM_DS28EA00));
/* Allow the strong pullup to be disabled, but default to enabled.
* If it was disabled a parasite powered device might not get the require

2
drivers/w1/w1.c
View File

@ -680,6 +680,8 @@ static int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn)
atomic_set(&sl->refcnt, 0);
init_completion(&sl->released);
request_module("w1-family-0x%0x", rn->family);
spin_lock(&w1_flock);
f = w1_family_registered(rn->family);
if (!f) {