arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
[ Upstream commit 2013a4b684
]
The scripts/dtc/checks.c requires that the node have empty "dma-ranges"
property must have the same "#address-cells" and "#size-cells" values as
the parent node. Otherwise, the following warnings is reported:
arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi:7.3-14: Warning \
(dma_ranges_format): /usb:dma-ranges: empty "dma-ranges" property but \
its #address-cells (1) differs from / (2)
arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi:7.3-14: Warning \
(dma_ranges_format): /usb:dma-ranges: empty "dma-ranges" property but \
its #size-cells (1) differs from / (2)
Arnd Bergmann figured out why it's necessary:
Also note that the #address-cells=<1> means that any device under
this bus is assumed to only support 32-bit addressing, and DMA will
have to go through a slow swiotlb in the absence of an IOMMU.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20201016090833.1892-2-thunder.leizhen@huawei.com'
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
5.4-rM2-2.2.x-imx-squashed
parent
acac3f7d7d
commit
8ed74a0122
|
@ -5,20 +5,20 @@
|
|||
usb {
|
||||
compatible = "simple-bus";
|
||||
dma-ranges;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0x0 0x68500000 0x00400000>;
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges = <0x0 0x0 0x0 0x68500000 0x0 0x00400000>;
|
||||
|
||||
usbphy0: usb-phy@0 {
|
||||
compatible = "brcm,sr-usb-combo-phy";
|
||||
reg = <0x00000000 0x100>;
|
||||
reg = <0x0 0x00000000 0x0 0x100>;
|
||||
#phy-cells = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
xhci0: usb@1000 {
|
||||
compatible = "generic-xhci";
|
||||
reg = <0x00001000 0x1000>;
|
||||
reg = <0x0 0x00001000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phys = <&usbphy0 1>, <&usbphy0 0>;
|
||||
phy-names = "phy0", "phy1";
|
||||
|
@ -28,7 +28,7 @@
|
|||
|
||||
bdc0: usb@2000 {
|
||||
compatible = "brcm,bdc-v0.16";
|
||||
reg = <0x00002000 0x1000>;
|
||||
reg = <0x0 0x00002000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phys = <&usbphy0 0>, <&usbphy0 1>;
|
||||
phy-names = "phy0", "phy1";
|
||||
|
@ -38,21 +38,21 @@
|
|||
|
||||
usbphy1: usb-phy@10000 {
|
||||
compatible = "brcm,sr-usb-combo-phy";
|
||||
reg = <0x00010000 0x100>;
|
||||
reg = <0x0 0x00010000 0x0 0x100>;
|
||||
#phy-cells = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
usbphy2: usb-phy@20000 {
|
||||
compatible = "brcm,sr-usb-hs-phy";
|
||||
reg = <0x00020000 0x100>;
|
||||
reg = <0x0 0x00020000 0x0 0x100>;
|
||||
#phy-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
xhci1: usb@11000 {
|
||||
compatible = "generic-xhci";
|
||||
reg = <0x00011000 0x1000>;
|
||||
reg = <0x0 0x00011000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phys = <&usbphy1 1>, <&usbphy2>, <&usbphy1 0>;
|
||||
phy-names = "phy0", "phy1", "phy2";
|
||||
|
@ -62,7 +62,7 @@
|
|||
|
||||
bdc1: usb@21000 {
|
||||
compatible = "brcm,bdc-v0.16";
|
||||
reg = <0x00021000 0x1000>;
|
||||
reg = <0x0 0x00021000 0x0 0x1000>;
|
||||
interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
|
||||
phys = <&usbphy2>;
|
||||
phy-names = "phy0";
|
||||
|
|
Loading…
Reference in New Issue