be2net: convert to new udp_tunnel_nic infra
Convert be2net to new udp_tunnel_nic infra. NIC only takes one VxLAN port. Remove the port tracking using a list. The warning in be_work_del_vxlan_port() looked suspicious - like the driver expected ports to be removed in order of addition. be2net unregisters ports when going down and re-registers them (for skyhawk) when coming up, but it never checks if the device is up in the add_port / del_port callbacks. Make it use UDP_TUNNEL_NIC_INFO_OPEN_ONLY. Sadly this driver calls its own open/close functions directly so the udp_tunnel_nic_reset_ntf() workaround is needed. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
641ca08547
commit
8f0545d232
|
@ -654,8 +654,6 @@ struct be_adapter {
|
|||
u8 hba_port_num;
|
||||
u16 pvid;
|
||||
__be16 vxlan_port; /* offloaded vxlan port num */
|
||||
int vxlan_port_count; /* active vxlan port count */
|
||||
struct list_head vxlan_port_list; /* vxlan port list */
|
||||
struct phy_info phy;
|
||||
u8 wol_cap;
|
||||
bool wol_en;
|
||||
|
@ -679,9 +677,6 @@ struct be_adapter {
|
|||
struct be_cmd_work {
|
||||
struct work_struct work;
|
||||
struct be_adapter *adapter;
|
||||
union {
|
||||
__be16 vxlan_port;
|
||||
} info;
|
||||
};
|
||||
|
||||
#define be_physfn(adapter) (!adapter->virtfn)
|
||||
|
|
|
@ -3829,8 +3829,8 @@ static int be_open(struct net_device *netdev)
|
|||
be_link_status_update(adapter, link_status);
|
||||
|
||||
netif_tx_start_all_queues(netdev);
|
||||
if (skyhawk_chip(adapter))
|
||||
udp_tunnel_get_rx_info(netdev);
|
||||
|
||||
udp_tunnel_nic_reset_ntf(netdev);
|
||||
|
||||
return 0;
|
||||
err:
|
||||
|
@ -3967,18 +3967,23 @@ static void be_cancel_err_detection(struct be_adapter *adapter)
|
|||
}
|
||||
}
|
||||
|
||||
static int be_enable_vxlan_offloads(struct be_adapter *adapter)
|
||||
/* VxLAN offload Notes:
|
||||
*
|
||||
* The stack defines tunnel offload flags (hw_enc_features) for IP and doesn't
|
||||
* distinguish various types of transports (VxLAN, GRE, NVGRE ..). So, offload
|
||||
* is expected to work across all types of IP tunnels once exported. Skyhawk
|
||||
* supports offloads for either VxLAN or NVGRE, exclusively. So we export VxLAN
|
||||
* offloads in hw_enc_features only when a VxLAN port is added. If other (non
|
||||
* VxLAN) tunnels are configured while VxLAN offloads are enabled, offloads for
|
||||
* those other tunnels are unexported on the fly through ndo_features_check().
|
||||
*/
|
||||
static int be_vxlan_set_port(struct net_device *netdev, unsigned int table,
|
||||
unsigned int entry, struct udp_tunnel_info *ti)
|
||||
{
|
||||
struct net_device *netdev = adapter->netdev;
|
||||
struct be_adapter *adapter = netdev_priv(netdev);
|
||||
struct device *dev = &adapter->pdev->dev;
|
||||
struct be_vxlan_port *vxlan_port;
|
||||
__be16 port;
|
||||
int status;
|
||||
|
||||
vxlan_port = list_first_entry(&adapter->vxlan_port_list,
|
||||
struct be_vxlan_port, list);
|
||||
port = vxlan_port->port;
|
||||
|
||||
status = be_cmd_manage_iface(adapter, adapter->if_handle,
|
||||
OP_CONVERT_NORMAL_TO_TUNNEL);
|
||||
if (status) {
|
||||
|
@ -3987,25 +3992,26 @@ static int be_enable_vxlan_offloads(struct be_adapter *adapter)
|
|||
}
|
||||
adapter->flags |= BE_FLAGS_VXLAN_OFFLOADS;
|
||||
|
||||
status = be_cmd_set_vxlan_port(adapter, port);
|
||||
status = be_cmd_set_vxlan_port(adapter, ti->port);
|
||||
if (status) {
|
||||
dev_warn(dev, "Failed to add VxLAN port\n");
|
||||
return status;
|
||||
}
|
||||
adapter->vxlan_port = port;
|
||||
adapter->vxlan_port = ti->port;
|
||||
|
||||
netdev->hw_enc_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
|
||||
NETIF_F_TSO | NETIF_F_TSO6 |
|
||||
NETIF_F_GSO_UDP_TUNNEL;
|
||||
|
||||
dev_info(dev, "Enabled VxLAN offloads for UDP port %d\n",
|
||||
be16_to_cpu(port));
|
||||
be16_to_cpu(ti->port));
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void be_disable_vxlan_offloads(struct be_adapter *adapter)
|
||||
static int be_vxlan_unset_port(struct net_device *netdev, unsigned int table,
|
||||
unsigned int entry, struct udp_tunnel_info *ti)
|
||||
{
|
||||
struct net_device *netdev = adapter->netdev;
|
||||
struct be_adapter *adapter = netdev_priv(netdev);
|
||||
|
||||
if (adapter->flags & BE_FLAGS_VXLAN_OFFLOADS)
|
||||
be_cmd_manage_iface(adapter, adapter->if_handle,
|
||||
|
@ -4018,8 +4024,19 @@ static void be_disable_vxlan_offloads(struct be_adapter *adapter)
|
|||
adapter->vxlan_port = 0;
|
||||
|
||||
netdev->hw_enc_features = 0;
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct udp_tunnel_nic_info be_udp_tunnels = {
|
||||
.set_port = be_vxlan_set_port,
|
||||
.unset_port = be_vxlan_unset_port,
|
||||
.flags = UDP_TUNNEL_NIC_INFO_MAY_SLEEP |
|
||||
UDP_TUNNEL_NIC_INFO_OPEN_ONLY,
|
||||
.tables = {
|
||||
{ .n_entries = 1, .tunnel_types = UDP_TUNNEL_TYPE_VXLAN, },
|
||||
},
|
||||
};
|
||||
|
||||
static void be_calculate_vf_res(struct be_adapter *adapter, u16 num_vfs,
|
||||
struct be_resources *vft_res)
|
||||
{
|
||||
|
@ -4135,7 +4152,7 @@ static int be_clear(struct be_adapter *adapter)
|
|||
&vft_res);
|
||||
}
|
||||
|
||||
be_disable_vxlan_offloads(adapter);
|
||||
be_vxlan_unset_port(adapter->netdev, 0, 0, NULL);
|
||||
|
||||
be_if_destroy(adapter);
|
||||
|
||||
|
@ -5053,147 +5070,6 @@ static struct be_cmd_work *be_alloc_work(struct be_adapter *adapter,
|
|||
return work;
|
||||
}
|
||||
|
||||
/* VxLAN offload Notes:
|
||||
*
|
||||
* The stack defines tunnel offload flags (hw_enc_features) for IP and doesn't
|
||||
* distinguish various types of transports (VxLAN, GRE, NVGRE ..). So, offload
|
||||
* is expected to work across all types of IP tunnels once exported. Skyhawk
|
||||
* supports offloads for either VxLAN or NVGRE, exclusively. So we export VxLAN
|
||||
* offloads in hw_enc_features only when a VxLAN port is added. If other (non
|
||||
* VxLAN) tunnels are configured while VxLAN offloads are enabled, offloads for
|
||||
* those other tunnels are unexported on the fly through ndo_features_check().
|
||||
*
|
||||
* Skyhawk supports VxLAN offloads only for one UDP dport. So, if the stack
|
||||
* adds more than one port, disable offloads and re-enable them again when
|
||||
* there's only one port left. We maintain a list of ports for this purpose.
|
||||
*/
|
||||
static void be_work_add_vxlan_port(struct work_struct *work)
|
||||
{
|
||||
struct be_cmd_work *cmd_work =
|
||||
container_of(work, struct be_cmd_work, work);
|
||||
struct be_adapter *adapter = cmd_work->adapter;
|
||||
struct device *dev = &adapter->pdev->dev;
|
||||
__be16 port = cmd_work->info.vxlan_port;
|
||||
struct be_vxlan_port *vxlan_port;
|
||||
int status;
|
||||
|
||||
/* Bump up the alias count if it is an existing port */
|
||||
list_for_each_entry(vxlan_port, &adapter->vxlan_port_list, list) {
|
||||
if (vxlan_port->port == port) {
|
||||
vxlan_port->port_aliases++;
|
||||
goto done;
|
||||
}
|
||||
}
|
||||
|
||||
/* Add a new port to our list. We don't need a lock here since port
|
||||
* add/delete are done only in the context of a single-threaded work
|
||||
* queue (be_wq).
|
||||
*/
|
||||
vxlan_port = kzalloc(sizeof(*vxlan_port), GFP_KERNEL);
|
||||
if (!vxlan_port)
|
||||
goto done;
|
||||
|
||||
vxlan_port->port = port;
|
||||
INIT_LIST_HEAD(&vxlan_port->list);
|
||||
list_add_tail(&vxlan_port->list, &adapter->vxlan_port_list);
|
||||
adapter->vxlan_port_count++;
|
||||
|
||||
if (adapter->flags & BE_FLAGS_VXLAN_OFFLOADS) {
|
||||
dev_info(dev,
|
||||
"Only one UDP port supported for VxLAN offloads\n");
|
||||
dev_info(dev, "Disabling VxLAN offloads\n");
|
||||
goto err;
|
||||
}
|
||||
|
||||
if (adapter->vxlan_port_count > 1)
|
||||
goto done;
|
||||
|
||||
status = be_enable_vxlan_offloads(adapter);
|
||||
if (!status)
|
||||
goto done;
|
||||
|
||||
err:
|
||||
be_disable_vxlan_offloads(adapter);
|
||||
done:
|
||||
kfree(cmd_work);
|
||||
return;
|
||||
}
|
||||
|
||||
static void be_work_del_vxlan_port(struct work_struct *work)
|
||||
{
|
||||
struct be_cmd_work *cmd_work =
|
||||
container_of(work, struct be_cmd_work, work);
|
||||
struct be_adapter *adapter = cmd_work->adapter;
|
||||
__be16 port = cmd_work->info.vxlan_port;
|
||||
struct be_vxlan_port *vxlan_port;
|
||||
|
||||
/* Nothing to be done if a port alias is being deleted */
|
||||
list_for_each_entry(vxlan_port, &adapter->vxlan_port_list, list) {
|
||||
if (vxlan_port->port == port) {
|
||||
if (vxlan_port->port_aliases) {
|
||||
vxlan_port->port_aliases--;
|
||||
goto done;
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/* No port aliases left; delete the port from the list */
|
||||
list_del(&vxlan_port->list);
|
||||
adapter->vxlan_port_count--;
|
||||
|
||||
/* Disable VxLAN offload if this is the offloaded port */
|
||||
if (adapter->vxlan_port == vxlan_port->port) {
|
||||
WARN_ON(adapter->vxlan_port_count);
|
||||
be_disable_vxlan_offloads(adapter);
|
||||
dev_info(&adapter->pdev->dev,
|
||||
"Disabled VxLAN offloads for UDP port %d\n",
|
||||
be16_to_cpu(port));
|
||||
goto out;
|
||||
}
|
||||
|
||||
/* If only 1 port is left, re-enable VxLAN offload */
|
||||
if (adapter->vxlan_port_count == 1)
|
||||
be_enable_vxlan_offloads(adapter);
|
||||
|
||||
out:
|
||||
kfree(vxlan_port);
|
||||
done:
|
||||
kfree(cmd_work);
|
||||
}
|
||||
|
||||
static void be_cfg_vxlan_port(struct net_device *netdev,
|
||||
struct udp_tunnel_info *ti,
|
||||
void (*func)(struct work_struct *))
|
||||
{
|
||||
struct be_adapter *adapter = netdev_priv(netdev);
|
||||
struct be_cmd_work *cmd_work;
|
||||
|
||||
if (ti->type != UDP_TUNNEL_TYPE_VXLAN)
|
||||
return;
|
||||
|
||||
if (lancer_chip(adapter) || BEx_chip(adapter) || be_is_mc(adapter))
|
||||
return;
|
||||
|
||||
cmd_work = be_alloc_work(adapter, func);
|
||||
if (cmd_work) {
|
||||
cmd_work->info.vxlan_port = ti->port;
|
||||
queue_work(be_wq, &cmd_work->work);
|
||||
}
|
||||
}
|
||||
|
||||
static void be_del_vxlan_port(struct net_device *netdev,
|
||||
struct udp_tunnel_info *ti)
|
||||
{
|
||||
be_cfg_vxlan_port(netdev, ti, be_work_del_vxlan_port);
|
||||
}
|
||||
|
||||
static void be_add_vxlan_port(struct net_device *netdev,
|
||||
struct udp_tunnel_info *ti)
|
||||
{
|
||||
be_cfg_vxlan_port(netdev, ti, be_work_add_vxlan_port);
|
||||
}
|
||||
|
||||
static netdev_features_t be_features_check(struct sk_buff *skb,
|
||||
struct net_device *dev,
|
||||
netdev_features_t features)
|
||||
|
@ -5309,8 +5185,8 @@ static const struct net_device_ops be_netdev_ops = {
|
|||
#endif
|
||||
.ndo_bridge_setlink = be_ndo_bridge_setlink,
|
||||
.ndo_bridge_getlink = be_ndo_bridge_getlink,
|
||||
.ndo_udp_tunnel_add = be_add_vxlan_port,
|
||||
.ndo_udp_tunnel_del = be_del_vxlan_port,
|
||||
.ndo_udp_tunnel_add = udp_tunnel_nic_add_port,
|
||||
.ndo_udp_tunnel_del = udp_tunnel_nic_del_port,
|
||||
.ndo_features_check = be_features_check,
|
||||
.ndo_get_phys_port_id = be_get_phys_port_id,
|
||||
};
|
||||
|
@ -5342,6 +5218,9 @@ static void be_netdev_init(struct net_device *netdev)
|
|||
|
||||
netdev->ethtool_ops = &be_ethtool_ops;
|
||||
|
||||
if (!lancer_chip(adapter) && !BEx_chip(adapter) && !be_is_mc(adapter))
|
||||
netdev->udp_tunnel_nic_info = &be_udp_tunnels;
|
||||
|
||||
/* MTU range: 256 - 9000 */
|
||||
netdev->min_mtu = BE_MIN_MTU;
|
||||
netdev->max_mtu = BE_MAX_MTU;
|
||||
|
@ -5819,7 +5698,6 @@ static int be_drv_init(struct be_adapter *adapter)
|
|||
/* Must be a power of 2 or else MODULO will BUG_ON */
|
||||
adapter->be_get_temp_freq = 64;
|
||||
|
||||
INIT_LIST_HEAD(&adapter->vxlan_port_list);
|
||||
return 0;
|
||||
|
||||
free_rx_filter:
|
||||
|
|
Loading…
Reference in a new issue