redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

i2c-i801: Remove verbose debugging messages 

Dumping the register values before and after every transaction was
useful during driver development but now it's only spamming the log.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
hifive-unleashed-5.1
Jean Delvare 2008-07-14 22:38:32 +02:00 committed by Jean Delvare
parent e3e7fc3c40
commit 90df2cb1c8
1 changed files with 0 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
drivers/i2c/busses/i2c-i801.c
View File

@ -138,11 +138,6 @@ static int i801_transaction(int xact)
int result = 0;
int timeout = 0;
dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x, "
"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
inb_p(SMBHSTDAT1));
/* Make sure the SMBus host is ready to start transmitting */
/* 0x1f = Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) {
@ -202,10 +197,6 @@ static int i801_transaction(int xact)
dev_dbg(&I801_dev->dev, "Failed reset at end of transaction "
"(%02x)\n", temp);
}
dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, "
"ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT),
inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0),
inb_p(SMBHSTDAT1));
return result;
}
@ -293,11 +284,6 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
}
outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT);
dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, "
"ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i,
inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT));
/* Make sure the SMBus host is ready to start transmitting */
temp = inb_p(SMBHSTSTS);
if (i == 1) {
@ -381,10 +367,6 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
"Bad status (%02x) at end of transaction\n",
temp);
}
dev_dbg(&I801_dev->dev, "Block (post %d): CNT=%02x, CMD=%02x, "
"ADD=%02x, DAT0=%02x, DAT1=%02x, BLKDAT=%02x\n", i,
inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD),
inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1), inb_p(SMBBLKDAT));
if (result < 0)
return result;