ASoC: Updates for v5.6

A pretty big release this time around, a lot of new drivers and both
 Morimoto-san and Takashi were doing subsystem wide updates as well:
 
  - Further big refactorings from Morimoto-san simplifying the core
    interfaces and moving things to the component level.
  - Transition of drivers to managed buffer allocation and removal of
    redundant PCM ioctls.
  - New driver support for Ingenic JZ4770, Mediatek MT6660, Qualcomm
    WCD934x and WSA881x, and Realtek RT700, RT711, RT715, RT1011, RT1015
    and RT1308.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl4vEpMTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0KN+B/47oBWAdJYYSrwXyQtlQgpJv/o9fEB+
 OnhlvCVjC3gPc8rBnUmgyUNYpBEqtmIH1CVdG/2844e0w1g9JJ5UFPp0SJWZp3Nu
 toRznG64JKE0l9qZsLMOKXbPAtb/KvANM1dy7eTTtbHQhP4jA72f3jmDKfLDa/Xc
 vsOBWhBKKAkffu9AIYuMLG2sxuyw0lX3T1yxx7BfJE9NzHXwhYaBP7loLoQn33xg
 9DrjNuT+gTadUZKsZRw0kNBWC9IIryZ9oGFrfORI51G41sD2DgY3u0xd+Tm44XXe
 UPwUFxDSMslpIKKu6jn/14TjbOZX2i2D2bYs8DRcppA38Ltdc70DzbgV
 =C1LS
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.6

A pretty big release this time around, a lot of new drivers and both
Morimoto-san and Takashi were doing subsystem wide updates as well:

 - Further big refactorings from Morimoto-san simplifying the core
   interfaces and moving things to the component level.
 - Transition of drivers to managed buffer allocation and removal of
   redundant PCM ioctls.
 - New driver support for Ingenic JZ4770, Mediatek MT6660, Qualcomm
   WCD934x and WSA881x, and Realtek RT700, RT711, RT715, RT1011, RT1015
   and RT1308.

.mailmap

@@ -99,6 +99,7 @@ Jacob Shin <Jacob.Shin@amd.com>
 Jaegeuk Kim <jaegeuk@kernel.org> <jaegeuk@google.com>
 Jaegeuk Kim <jaegeuk@kernel.org> <jaegeuk@motorola.com>
 Jaegeuk Kim <jaegeuk@kernel.org> <jaegeuk.kim@samsung.com>
+Jakub Kicinski <kuba@kernel.org> <jakub.kicinski@netronome.com>
 James Bottomley <jejb@mulgrave.(none)>
 James Bottomley <jejb@titanic.il.steeleye.com>
 James E Wilson <wilson@specifix.com>
@@ -152,6 +153,7 @@ Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@web.de>
 Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
 Li Yang <leoyang.li@nxp.com> <leo@zh-kernel.org>
 Li Yang <leoyang.li@nxp.com> <leoli@freescale.com>
+Lukasz Luba <lukasz.luba@arm.com> <l.luba@partner.samsung.com>
 Maciej W. Rozycki <macro@mips.com> <macro@imgtec.com>
 Marc Zyngier <maz@kernel.org> <marc.zyngier@arm.com>
 Marcin Nowakowski <marcin.nowakowski@mips.com> <marcin.nowakowski@imgtec.com>
@@ -265,6 +267,7 @@ Vinod Koul <vkoul@kernel.org> <vkoul@infradead.org>
 Viresh Kumar <vireshk@kernel.org> <viresh.kumar@st.com>
 Viresh Kumar <vireshk@kernel.org> <viresh.linux@gmail.com>
 Viresh Kumar <vireshk@kernel.org> <viresh.kumar2@arm.com>
+Vivien Didelot <vivien.didelot@gmail.com> <vivien.didelot@savoirfairelinux.com>
 Vlad Dogaru <ddvlad@gmail.com> <vlad.dogaru@intel.com>
 Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@virtuozzo.com>
 Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@parallels.com>
@@ -276,3 +279,5 @@ Gustavo Padovan <gustavo@las.ic.unicamp.br>
 Gustavo Padovan <padovan@profusion.mobi>
 Changbin Du <changbin.du@intel.com> <changbin.du@intel.com>
 Changbin Du <changbin.du@intel.com> <changbin.du@gmail.com>
+Steve Wise <larrystevenwise@gmail.com> <swise@chelsio.com>
+Steve Wise <larrystevenwise@gmail.com> <swise@opengridcomputing.com>

Documentation/ABI/stable/sysfs-driver-mlxreg-io

@@ -29,13 +29,13 @@ Description:	This file shows the system fans direction:
 
 		The files are read only.
 
-What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
 
 Date:		November 2018
 KernelVersion:	5.0
 Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show with which CPLD versions have been burned
-		on LED board.
+		on LED or Gearbox board.
 
 		The files are read only.
 
@@ -121,6 +121,15 @@ Description:	These files show the system reset cause, as following: ComEx
 
 		The files are read only.
 
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
+Date:		November 2018
+KernelVersion:	5.0
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show with which CPLD versions have been burned
+		on LED board.
+
+		The files are read only.
+
 Date:		June 2019
 KernelVersion:	5.3
 Contact:	Vadim Pasternak <vadimpmellanox.com>

Documentation/ABI/testing/sysfs-platform-mellanox-bootctl

@@ -1,4 +1,4 @@
-What:		/sys/bus/platform/devices/MLNXBF04:00/driver/lifecycle_state
+What:		/sys/bus/platform/devices/MLNXBF04:00/lifecycle_state
 Date:		Oct 2019
 KernelVersion:	5.5
 Contact:	"Liming Sun <lsun@mellanox.com>"
@@ -10,7 +10,7 @@ Description:
 		  GA Non-Secured - Non-Secure chip and not able to change state
 		  RMA - Return Merchandise Authorization
 
-What:		/sys/bus/platform/devices/MLNXBF04:00/driver/post_reset_wdog
+What:		/sys/bus/platform/devices/MLNXBF04:00/post_reset_wdog
 Date:		Oct 2019
 KernelVersion:	5.5
 Contact:	"Liming Sun <lsun@mellanox.com>"
@@ -19,7 +19,7 @@ Description:
 		to reboot the chip and recover it to the old state if the new
 		boot partition fails.
 
-What:		/sys/bus/platform/devices/MLNXBF04:00/driver/reset_action
+What:		/sys/bus/platform/devices/MLNXBF04:00/reset_action
 Date:		Oct 2019
 KernelVersion:	5.5
 Contact:	"Liming Sun <lsun@mellanox.com>"
@@ -30,7 +30,7 @@ Description:
 		  emmc - boot from the onchip eMMC
 		  emmc_legacy - boot from the onchip eMMC in legacy (slow) mode
 
-What:		/sys/bus/platform/devices/MLNXBF04:00/driver/second_reset_action
+What:		/sys/bus/platform/devices/MLNXBF04:00/second_reset_action
 Date:		Oct 2019
 KernelVersion:	5.5
 Contact:	"Liming Sun <lsun@mellanox.com>"
@@ -44,7 +44,7 @@ Description:
 		  swap_emmc - swap the primary / secondary boot partition
 		  none - cancel the action
 
-What:		/sys/bus/platform/devices/MLNXBF04:00/driver/secure_boot_fuse_state
+What:		/sys/bus/platform/devices/MLNXBF04:00/secure_boot_fuse_state
 Date:		Oct 2019
 KernelVersion:	5.5
 Contact:	"Liming Sun <lsun@mellanox.com>"

Documentation/admin-guide/device-mapper/dm-integrity.rst

@@ -144,7 +144,7 @@ journal_crypt:algorithm(:key)	(the key is optional)
 	Encrypt the journal using given algorithm to make sure that the
 	attacker can't read the journal. You can use a block cipher here
 	(such as "cbc(aes)") or a stream cipher (for example "chacha20",
-	"salsa20", "ctr(aes)" or "ecb(arc4)").
+	"salsa20" or "ctr(aes)").
 
 	The journal contains history of last writes to the block device,
 	an attacker reading the journal could see the last sector nubmers

Documentation/admin-guide/device-mapper/index.rst

@@ -8,6 +8,7 @@ Device Mapper
     cache-policies
     cache
     delay
+    dm-clone
     dm-crypt
     dm-dust
     dm-flakey

Documentation/admin-guide/devices.txt

@@ -319,7 +319,7 @@
 		182 = /dev/perfctr	Performance-monitoring counters
 		183 = /dev/hwrng	Generic random number generator
 		184 = /dev/cpu/microcode CPU microcode update interface
-		186 = /dev/atomicps	Atomic shapshot of process state data
+		186 = /dev/atomicps	Atomic snapshot of process state data
 		187 = /dev/irnet	IrNET device
 		188 = /dev/smbusbios	SMBus BIOS
 		189 = /dev/ussp_ctl	User space serial port control

Documentation/admin-guide/ext4.rst

@@ -181,14 +181,17 @@ When mounting an ext4 filesystem, the following option are accepted:
         system after its metadata has been committed to the journal.
 
   commit=nrsec	(*)
-        Ext4 can be told to sync all its data and metadata every 'nrsec'
-        seconds. The default value is 5 seconds.  This means that if you lose
-        your power, you will lose as much as the latest 5 seconds of work (your
-        filesystem will not be damaged though, thanks to the journaling).  This
-        default value (or any low value) will hurt performance, but it's good
-        for data-safety.  Setting it to 0 will have the same effect as leaving
-        it at the default (5 seconds).  Setting it to very large values will
-        improve performance.
+        This setting limits the maximum age of the running transaction to
+        'nrsec' seconds.  The default value is 5 seconds.  This means that if
+        you lose your power, you will lose as much as the latest 5 seconds of
+        metadata changes (your filesystem will not be damaged though, thanks
+        to the journaling). This default value (or any low value) will hurt
+        performance, but it's good for data-safety.  Setting it to 0 will have
+        the same effect as leaving it at the default (5 seconds).  Setting it
+        to very large values will improve performance.  Note that due to
+        delayed allocation even older data can be lost on power failure since
+        writeback of those data begins only after time set in
+        /proc/sys/vm/dirty_expire_centisecs.
 
   barrier=<0|1(*)>, barrier(*), nobarrier
         This enables/disables the use of write barriers in the jbd code.

Documentation/admin-guide/xfs.rst

@@ -253,7 +253,7 @@ The following sysctls are available for the XFS filesystem:
 	pool.
 
   fs.xfs.speculative_prealloc_lifetime
-		(Units: seconds   Min: 1  Default: 300  Max: 86400)
+	(Units: seconds   Min: 1  Default: 300  Max: 86400)
 	The interval at which the background scanning for inodes
 	with unused speculative preallocation runs. The scan
 	removes unused preallocation from clean inodes and releases

Documentation/dev-tools/kcov.rst

@@ -251,11 +251,11 @@ selectively from different subsystems.
 .. code-block:: c
 
     struct kcov_remote_arg {
-	unsigned	trace_mode;
-	unsigned	area_size;
-	unsigned	num_handles;
-	uint64_t	common_handle;
-	uint64_t	handles[0];
+	__u32		trace_mode;
+	__u32		area_size;
+	__u32		num_handles;
+	__aligned_u64	common_handle;
+	__aligned_u64	handles[0];
     };
 
     #define KCOV_INIT_TRACE			_IOR('c', 1, unsigned long)

Documentation/dev-tools/kselftest.rst

@@ -203,12 +203,12 @@ Test Module
 Kselftest tests the kernel from userspace.  Sometimes things need
 testing from within the kernel, one method of doing this is to create a
 test module.  We can tie the module into the kselftest framework by
-using a shell script test runner.  ``kselftest_module.sh`` is designed
+using a shell script test runner.  ``kselftest/module.sh`` is designed
 to facilitate this process.  There is also a header file provided to
 assist writing kernel modules that are for use with kselftest:
 
 - ``tools/testing/kselftest/kselftest_module.h``
-- ``tools/testing/kselftest/kselftest_module.sh``
+- ``tools/testing/kselftest/kselftest/module.sh``
 
 How to use
 ----------
@@ -247,7 +247,7 @@ A bare bones test module might look like this:
 
    #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 
-   #include "../tools/testing/selftests/kselftest_module.h"
+   #include "../tools/testing/selftests/kselftest/module.h"
 
    KSTM_MODULE_GLOBALS();
 
@@ -276,7 +276,7 @@ Example test script
 
     #!/bin/bash
     # SPDX-License-Identifier: GPL-2.0+
-    $(dirname $0)/../kselftest_module.sh "foo" test_foo
+    $(dirname $0)/../kselftest/module.sh "foo" test_foo
 
 
 Test Harness

Documentation/dev-tools/kunit/index.rst

@@ -9,6 +9,7 @@ KUnit - Unit Testing for the Linux Kernel
 
 	start
 	usage
+	kunit-tool
 	api/index
 	faq
 

Documentation/dev-tools/kunit/kunit-tool.rst

@@ -0,0 +1,57 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=================
+kunit_tool How-To
+=================
+
+What is kunit_tool?
+===================
+
+kunit_tool is a script (``tools/testing/kunit/kunit.py``) that aids in building
+the Linux kernel as UML (`User Mode Linux
+<http://user-mode-linux.sourceforge.net/>`_), running KUnit tests, parsing
+the test results and displaying them in a user friendly manner.
+
+What is a kunitconfig?
+======================
+
+It's just a defconfig that kunit_tool looks for in the base directory.
+kunit_tool uses it to generate a .config as you might expect. In addition, it
+verifies that the generated .config contains the CONFIG options in the
+kunitconfig; the reason it does this is so that it is easy to be sure that a
+CONFIG that enables a test actually ends up in the .config.
+
+How do I use kunit_tool?
+========================
+
+If a kunitconfig is present at the root directory, all you have to do is:
+
+.. code-block:: bash
+
+	./tools/testing/kunit/kunit.py run
+
+However, you most likely want to use it with the following options:
+
+.. code-block:: bash
+
+	./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all`
+
+- ``--timeout`` sets a maximum amount of time to allow tests to run.
+- ``--jobs`` sets the number of threads to use to build the kernel.
+
+If you just want to use the defconfig that ships with the kernel, you can
+append the ``--defconfig`` flag as well:
+
+.. code-block:: bash
+
+	./tools/testing/kunit/kunit.py run --timeout=30 --jobs=`nproc --all` --defconfig
+
+.. note::
+	This command is particularly helpful for getting started because it
+	just works. No kunitconfig needs to be present.
+
+For a list of all the flags supported by kunit_tool, you can run:
+
+.. code-block:: bash
+
+	./tools/testing/kunit/kunit.py run --help

Documentation/dev-tools/kunit/start.rst

@@ -19,21 +19,21 @@ The wrapper can be run with:
 
 .. code-block:: bash
 
-   ./tools/testing/kunit/kunit.py run
+	./tools/testing/kunit/kunit.py run --defconfig
 
-Creating a kunitconfig
-======================
-The Python script is a thin wrapper around Kbuild as such, it needs to be
-configured with a ``kunitconfig`` file. This file essentially contains the
+For more information on this wrapper (also called kunit_tool) checkout the
+:doc:`kunit-tool` page.
+
+Creating a .kunitconfig
+=======================
+The Python script is a thin wrapper around Kbuild. As such, it needs to be
+configured with a ``.kunitconfig`` file. This file essentially contains the
 regular Kernel config, with the specific test targets as well.
 
 .. code-block:: bash
 
-	git clone -b master https://kunit.googlesource.com/kunitconfig $PATH_TO_KUNITCONFIG_REPO
 	cd $PATH_TO_LINUX_REPO
-	ln -s $PATH_TO_KUNIT_CONFIG_REPO/kunitconfig kunitconfig
-
-You may want to add kunitconfig to your local gitignore.
+	cp arch/um/configs/kunit_defconfig .kunitconfig
 
 Verifying KUnit Works
 ---------------------
@@ -59,8 +59,8 @@ If everything worked correctly, you should see the following:
 followed by a list of tests that are run. All of them should be passing.
 
 .. note::
-   Because it is building a lot of sources for the first time, the ``Building
-   kunit kernel`` step may take a while.
+	Because it is building a lot of sources for the first time, the
+	``Building KUnit kernel`` step may take a while.
 
 Writing your first test
 =======================
@@ -148,7 +148,7 @@ and the following to ``drivers/misc/Makefile``:
 
 	obj-$(CONFIG_MISC_EXAMPLE_TEST) += example-test.o
 
-Now add it to your ``kunitconfig``:
+Now add it to your ``.kunitconfig``:
 
 .. code-block:: none
 
@@ -159,7 +159,7 @@ Now you can run the test:
 
 .. code-block:: bash
 
-	./tools/testing/kunit/kunit.py
+	./tools/testing/kunit/kunit.py run
 
 You should see the following failure:
 

Documentation/dev-tools/kunit/usage.rst

@@ -16,7 +16,7 @@ Organization of this document
 =============================
 
 This document is organized into two main sections: Testing and Isolating
-Behavior. The first covers what a unit test is and how to use KUnit to write
+Behavior. The first covers what unit tests are and how to use KUnit to write
 them. The second covers how to use KUnit to isolate code and make it possible
 to unit test code that was otherwise un-unit-testable.
 
@@ -174,13 +174,13 @@ Test Suites
 ~~~~~~~~~~~
 
 Now obviously one unit test isn't very helpful; the power comes from having
-many test cases covering all of your behaviors. Consequently it is common to
-have many *similar* tests; in order to reduce duplication in these closely
-related tests most unit testing frameworks provide the concept of a *test
-suite*, in KUnit we call it a *test suite*; all it is is just a collection of
-test cases for a unit of code with a set up function that gets invoked before
-every test cases and then a tear down function that gets invoked after every
-test case completes.
+many test cases covering all of a unit's behaviors. Consequently it is common
+to have many *similar* tests; in order to reduce duplication in these closely
+related tests most unit testing frameworks - including KUnit - provide the
+concept of a *test suite*. A *test suite* is just a collection of test cases
+for a unit of code with a set up function that gets invoked before every test
+case and then a tear down function that gets invoked after every test case
+completes.
 
 Example:
 
@@ -211,7 +211,7 @@ KUnit test framework.
 .. note::
    A test case will only be run if it is associated with a test suite.
 
-For a more information on these types of things see the :doc:`api/test`.
+For more information on these types of things see the :doc:`api/test`.
 
 Isolating Behavior
 ==================
@@ -338,7 +338,7 @@ We can easily test this code by *faking out* the underlying EEPROM:
 		return count;
 	}
 
-	ssize_t fake_eeprom_write(struct eeprom *this, size_t offset, const char *buffer, size_t count)
+	ssize_t fake_eeprom_write(struct eeprom *parent, size_t offset, const char *buffer, size_t count)
 	{
 		struct fake_eeprom *this = container_of(parent, struct fake_eeprom, parent);
 
@@ -454,7 +454,7 @@ KUnit on non-UML architectures
 By default KUnit uses UML as a way to provide dependencies for code under test.
 Under most circumstances KUnit's usage of UML should be treated as an
 implementation detail of how KUnit works under the hood. Nevertheless, there
-are instances where being able to run architecture specific code, or test
+are instances where being able to run architecture specific code or test
 against real hardware is desirable. For these reasons KUnit supports running on
 other architectures.
 
@@ -557,7 +557,7 @@ run your tests on your hardware setup just by compiling for your architecture.
 .. important::
    Always prefer tests that run on UML to tests that only run under a particular
    architecture, and always prefer tests that run under QEMU or another easy
-   (and monitarily free) to obtain software environment to a specific piece of
+   (and monetarily free) to obtain software environment to a specific piece of
    hardware.
 
 Nevertheless, there are still valid reasons to write an architecture or hardware

Documentation/devicetree/bindings/arm/sunxi.yaml

@@ -8,7 +8,7 @@ title: Allwinner platforms device tree bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   $nodename:

Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml

@@ -8,7 +8,7 @@ title: Allwinner A64 Display Engine Bus Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   $nodename:

Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml

@@ -8,7 +8,7 @@ title: Allwinner A23 RSB Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   "#address-cells":

Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-ccu.yaml

@@ -8,7 +8,7 @@ title: Allwinner Clock Control Unit Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   "#clock-cells":

Documentation/devicetree/bindings/crypto/allwinner,sun4i-a10-crypto.yaml

@@ -8,7 +8,7 @@ title: Allwinner A10 Security System Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml

@@ -8,7 +8,7 @@ title: Allwinner A31 MIPI-DSI Controller Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   "#address-cells": true

Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Ronbo RB070D30 DSI Display Panel
 
 maintainers:
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/dma/allwinner,sun4i-a10-dma.yaml

@@ -8,7 +8,7 @@ title: Allwinner A10 DMA Controller Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 allOf:
   - $ref: "dma-controller.yaml#"

Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml

@@ -8,7 +8,7 @@ title: Allwinner A64 DMA Controller Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 allOf:
   - $ref: "dma-controller.yaml#"

Documentation/devicetree/bindings/dma/allwinner,sun6i-a31-dma.yaml

@@ -8,7 +8,7 @@ title: Allwinner A31 DMA Controller Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 allOf:
   - $ref: "dma-controller.yaml#"

Documentation/devicetree/bindings/i2c/allwinner,sun6i-a31-p2wi.yaml

@@ -8,7 +8,7 @@ title: Allwinner A31 P2WI (Push/Pull 2 Wires Interface) Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#

Documentation/devicetree/bindings/i2c/i2c-at91.txt

@@ -18,8 +18,10 @@ Optional properties:
 - dma-names: should contain "tx" and "rx".
 - atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO
   capable I2C controllers.
-- i2c-sda-hold-time-ns: TWD hold time, only available for "atmel,sama5d4-i2c"
-  and "atmel,sama5d2-i2c".
+- i2c-sda-hold-time-ns: TWD hold time, only available for:
+	"atmel,sama5d4-i2c",
+	"atmel,sama5d2-i2c",
+	"microchip,sam9x60-i2c".
 - Child nodes conforming to i2c bus binding
 
 Examples :

Documentation/devicetree/bindings/iio/adc/adi,ad7292.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0-only
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/iio/adc/adi,ad7292.yaml#
@@ -53,7 +53,8 @@ patternProperties:
         description: |
           The channel number. It can have up to 8 channels numbered from 0 to 7.
         items:
-          maximum: 7
+          - minimum: 0
+            maximum: 7
 
       diff-channels:
         description: see Documentation/devicetree/bindings/iio/adc/adc.txt

Documentation/devicetree/bindings/iio/adc/allwinner,sun8i-a33-ths.yaml

@@ -8,7 +8,7 @@ title: Allwinner A33 Thermal Sensor Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   "#io-channel-cells":

Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml

@@ -8,7 +8,7 @@ title: Allwinner A10 LRADC Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/interrupt-controller/allwinner,sun4i-a10-ic.yaml

@@ -8,7 +8,7 @@ title: Allwinner A10 Interrupt Controller Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 allOf:
   - $ref: /schemas/interrupt-controller.yaml#

Documentation/devicetree/bindings/interrupt-controller/allwinner,sun7i-a20-sc-nmi.yaml

@@ -8,7 +8,7 @@ title: Allwinner A20 Non-Maskable Interrupt Controller Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 allOf:
   - $ref: /schemas/interrupt-controller.yaml#

Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml

@@ -8,7 +8,7 @@ title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 description: |-
   The Allwinner A10 and later has a CMOS Sensor Interface to retrieve

Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml

@@ -8,7 +8,7 @@ title: Allwinner A10 Infrared Controller Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 allOf:
   - $ref: "rc.yaml#"

Documentation/devicetree/bindings/memory-controllers/nvidia,tegra124-mc.yaml

@@ -60,7 +60,8 @@ patternProperties:
             maximum: 1066000000
 
           nvidia,emem-configuration:
-            $ref: /schemas/types.yaml#/definitions/uint32-array
+            allOf:
+              - $ref: /schemas/types.yaml#/definitions/uint32-array
             description: |
               Values to be written to the EMEM register block. See section
               "15.6.1 MC Registers" in the TRM.

Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-emc.yaml

@@ -56,7 +56,8 @@ patternProperties:
             maximum: 900000000
 
           nvidia,emc-auto-cal-interval:
-            $ref: /schemas/types.yaml#/definitions/uint32
+            allOf:
+              - $ref: /schemas/types.yaml#/definitions/uint32
             description:
               Pad calibration interval in microseconds.
             minimum: 0
@@ -78,7 +79,8 @@ patternProperties:
               Mode Register 0.
 
           nvidia,emc-zcal-cnt-long:
-            $ref: /schemas/types.yaml#/definitions/uint32
+            allOf:
+              - $ref: /schemas/types.yaml#/definitions/uint32
             description:
               Number of EMC clocks to wait before issuing any commands after
               sending ZCAL_MRW_CMD.
@@ -96,7 +98,8 @@ patternProperties:
               FBIO "read" FIFO periodic resetting enabled.
 
           nvidia,emc-configuration:
-            $ref: /schemas/types.yaml#/definitions/uint32-array
+            allOf:
+              - $ref: /schemas/types.yaml#/definitions/uint32-array
             description:
               EMC timing characterization data. These are the registers
               (see section "18.13.2 EMC Registers" in the TRM) whose values

Documentation/devicetree/bindings/memory-controllers/nvidia,tegra30-mc.yaml

@@ -77,7 +77,8 @@ patternProperties:
             maximum: 900000000
 
           nvidia,emem-configuration:
-            $ref: /schemas/types.yaml#/definitions/uint32-array
+            allOf:
+              - $ref: /schemas/types.yaml#/definitions/uint32-array
             description: |
               Values to be written to the EMEM register block. See section
               "18.13.1 MC Registers" in the TRM.

Documentation/devicetree/bindings/mfd/allwinner,sun4i-a10-ts.yaml

@@ -8,7 +8,7 @@ title: Allwinner A10 Resistive Touchscreen Controller Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   "#thermal-sensor-cells":

Documentation/devicetree/bindings/mmc/allwinner,sun4i-a10-mmc.yaml

@@ -11,7 +11,7 @@ allOf:
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   "#address-cells": true

Documentation/devicetree/bindings/mtd/allwinner,sun4i-a10-nand.yaml

@@ -11,7 +11,7 @@ allOf:
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   "#address-cells": true

Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml

@@ -11,7 +11,7 @@ allOf:
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/net/allwinner,sun4i-a10-mdio.yaml

@@ -8,7 +8,7 @@ title: Allwinner A10 MDIO Controller Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 allOf:
   - $ref: "mdio.yaml#"

Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.yaml

@@ -11,7 +11,7 @@ allOf:
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml

@@ -8,7 +8,7 @@ title: Allwinner A83t EMAC Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml

@@ -8,7 +8,7 @@ title: Allwinner A10 CAN Controller Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/net/can/tcan4x5x.txt

@@ -10,7 +10,6 @@ Required properties:
 	- #size-cells: 0
 	- spi-max-frequency: Maximum frequency of the SPI bus the chip can
 			     operate at should be less than or equal to 18 MHz.
-	- device-wake-gpios: Wake up GPIO to wake up the TCAN device.
 	- interrupt-parent: the phandle to the interrupt controller which provides
                     the interrupt.
 	- interrupts: interrupt specification for data-ready.
@@ -23,6 +22,7 @@ Optional properties:
 		       reset.
 	- device-state-gpios: Input GPIO that indicates if the device is in
 			      a sleep state or if the device is active.
+	- device-wake-gpios: Wake up GPIO to wake up the TCAN device.
 
 Example:
 tcan4x5x: tcan4x5x@0 {
@@ -36,5 +36,5 @@ tcan4x5x: tcan4x5x@0 {
 		interrupts = <14 GPIO_ACTIVE_LOW>;
 		device-state-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 		device-wake-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
 };

Documentation/devicetree/bindings/net/snps,dwmac.yaml

@@ -347,6 +347,7 @@ allOf:
               - st,spear600-gmac
 
     then:
+      properties:
         snps,tso:
           $ref: /schemas/types.yaml#definitions/flag
           description:

Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml

@@ -1,4 +1,4 @@
-# SPDX-License-Identifier: GPL-2.0
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/net/ti,cpsw-switch.yaml#
@@ -44,7 +44,6 @@ properties:
     description: CPSW functional clock
 
   clock-names:
-    maxItems: 1
     items:
       - const: fck
 
@@ -70,7 +69,6 @@ properties:
       Phandle to the system control device node which provides access to
       efuse IO range with MAC addresses
 
-
   ethernet-ports:
     type: object
     properties:
@@ -82,8 +80,6 @@ properties:
     patternProperties:
       "^port@[0-9]+$":
           type: object
-          minItems: 1
-          maxItems: 2
           description: CPSW external ports
 
           allOf:
@@ -91,23 +87,20 @@ properties:
 
           properties:
             reg:
-              maxItems: 1
-              enum: [1, 2]
+              items:
+                - enum: [1, 2]
               description: CPSW port number
 
             phys:
-              $ref: /schemas/types.yaml#definitions/phandle-array
               maxItems: 1
               description:  phandle on phy-gmii-sel PHY
 
             label:
-              $ref: /schemas/types.yaml#/definitions/string-array
-              maxItems: 1
               description: label associated with this port
 
             ti,dual-emac-pvid:
-              $ref: /schemas/types.yaml#/definitions/uint32
-              maxItems: 1
+              allOf:
+                - $ref: /schemas/types.yaml#/definitions/uint32
               minimum: 1
               maximum: 1024
               description:
@@ -136,7 +129,6 @@ properties:
         description: CPTS reference clock
 
       clock-names:
-        maxItems: 1
         items:
           - const: cpts
 
@@ -201,7 +193,7 @@ examples:
                         phys = <&phy_gmii_sel 1>;
                         phy-handle = <&ethphy0_sw>;
                         phy-mode = "rgmii";
-                        ti,dual_emac_pvid = <1>;
+                        ti,dual-emac-pvid = <1>;
                 };
 
                 cpsw_port2: port@2 {
@@ -211,7 +203,7 @@ examples:
                         phys = <&phy_gmii_sel 2>;
                         phy-handle = <&ethphy1_sw>;
                         phy-mode = "rgmii";
-                        ti,dual_emac_pvid = <2>;
+                        ti,dual-emac-pvid = <2>;
                 };
         };
 

Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml

@@ -8,7 +8,7 @@ title: Allwinner A10 Security ID Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 allOf:
   - $ref: "nvmem.yaml#"

Documentation/devicetree/bindings/phy/allwinner,sun6i-a31-mipi-dphy.yaml

@@ -8,7 +8,7 @@ title: Allwinner A31 MIPI D-PHY Controller Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   "#phy-cells":

Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml

@@ -8,7 +8,7 @@ title: Allwinner A10 Pin Controller Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   "#gpio-cells":

Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml

@@ -8,7 +8,7 @@ title: Allwinner A10 PWM Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   "#pwm-cells":

Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml

@@ -50,6 +50,8 @@ properties:
     description: Should contain the WWDG1 watchdog reset interrupt
     maxItems: 1
 
+  wakeup-source: true
+
   mboxes:
     description:
       This property is required only if the rpmsg/virtio functionality is used.

Documentation/devicetree/bindings/reset/brcm,brcmstb-reset.txt

@@ -22,6 +22,6 @@ Example:
 	};
 
 	&ethernet_switch {
-		resets = <&reset>;
+		resets = <&reset 26>;
 		reset-names = "switch";
 	};

Documentation/devicetree/bindings/rtc/allwinner,sun4i-a10-rtc.yaml

@@ -11,7 +11,7 @@ allOf:
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml

@@ -8,7 +8,7 @@ title: Allwinner A31 RTC Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   "#clock-cells":

Documentation/devicetree/bindings/serio/allwinner,sun4i-a10-ps2.yaml

@@ -8,7 +8,7 @@ title: Allwinner A10 PS2 Host Controller Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 description:
   A20 PS2 is dual role controller (PS2 host and PS2 device). These

Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-codec.yaml

@@ -8,7 +8,7 @@ title: Allwinner A10 Codec Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   "#sound-dai-cells":

Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml

@@ -8,7 +8,7 @@ title: Allwinner A10 I2S Controller Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   "#sound-dai-cells":

Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-spdif.yaml

@@ -10,7 +10,7 @@ maintainers:
   - Chen-Yu Tsai <wens@csie.org>
   - Liam Girdwood <lgirdwood@gmail.com>
   - Mark Brown <broonie@kernel.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   "#sound-dai-cells":

Documentation/devicetree/bindings/sound/allwinner,sun50i-a64-codec-analog.yaml

@@ -8,7 +8,7 @@ title: Allwinner A64 Analog Codec Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/sound/allwinner,sun8i-a23-codec-analog.yaml

@@ -8,7 +8,7 @@ title: Allwinner A23 Analog Codec Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/sound/allwinner,sun8i-a33-codec.yaml

@@ -8,7 +8,7 @@ title: Allwinner A33 Codec Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   "#sound-dai-cells":

Documentation/devicetree/bindings/sound/amlogic,axg-fifo.txt

@@ -17,6 +17,9 @@ Required properties:
   * "arb" : memory ARB line (required)
   * "rst" : dedicated device reset line (optional)
 - #sound-dai-cells: must be 0.
+- amlogic,fifo-depth: The size of the controller's fifo in bytes. This
+  		      is useful for determining certain configuration such
+		      as the flush threshold of the fifo
 
 Example of FRDDR A on the A113 SoC:
 
@@ -27,4 +30,5 @@ frddr_a: audio-controller@1c0 {
 	interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
 	clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
 	resets = <&arb AXG_ARB_FRDDR_A>;
+	fifo-depth = <512>;
 };

Documentation/devicetree/bindings/sound/fsl,asrc.txt

@@ -8,7 +8,12 @@ three substreams within totally 10 channels.
 
 Required properties:
 
-  - compatible		: Contains "fsl,imx35-asrc" or "fsl,imx53-asrc".
+  - compatible		: Compatible list, should contain one of the following
+			  compatibles:
+			  "fsl,imx35-asrc",
+			  "fsl,imx53-asrc",
+			  "fsl,imx8qm-asrc",
+			  "fsl,imx8qxp-asrc",
 
   - reg			: Offset and length of the register set for the device.
 
@@ -35,6 +40,11 @@ Required properties:
 
    - fsl,asrc-width	: Defines a mutual sample width used by DPCM Back Ends.
 
+   - fsl,asrc-clk-map   : Defines clock map used in driver. which is required
+			  by imx8qm/imx8qxp platform
+			  <0> - select the map for asrc0 in imx8qm/imx8qxp
+			  <1> - select the map for asrc1 in imx8qm/imx8qxp
+
 Optional properties:
 
    - big-endian		: If this property is absent, the little endian mode

Documentation/devicetree/bindings/sound/gtm601.txt

@@ -1,10 +1,16 @@
 GTM601 UMTS modem audio interface CODEC
 
-This device has no configuration interface. Sample rate is fixed - 8kHz.
+This device has no configuration interface. The sample rate and channels are
+based on the compatible string
+	"option,gtm601" = 8kHz mono
+	"broadmobi,bm818" = 48KHz stereo
 
 Required properties:
 
-  - compatible : "option,gtm601"
+  - compatible : one of
+	"option,gtm601"
+	"broadmobi,bm818"
+
 
 Example:
 

Documentation/devicetree/bindings/sound/ingenic,codec.yaml

@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/ingenic,codec.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic JZ47xx internal codec DT bindings
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  $nodename:
+    pattern: '^audio-codec@.*'
+
+  compatible:
+    oneOf:
+      - const: ingenic,jz4770-codec
+      - const: ingenic,jz4725b-codec
+      - const: ingenic,jz4740-codec
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: aic
+
+  '#sound-dai-cells':
+    const: 0
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - '#sound-dai-cells'
+
+examples:
+  - |
+    #include <dt-bindings/clock/jz4740-cgu.h>
+    codec: audio-codec@10020080 {
+      compatible = "ingenic,jz4740-codec";
+      reg = <0x10020080 0x8>;
+      #sound-dai-cells = <0>;
+      clocks = <&cgu JZ4740_CLK_AIC>;
+      clock-names = "aic";
+    };
+
+...

Documentation/devicetree/bindings/sound/ingenic,jz4725b-codec.txt

@@ -1,20 +0,0 @@
-Ingenic JZ4725B codec controller
-
-Required properties:
-- compatible : "ingenic,jz4725b-codec"
-- reg : codec registers location and length
-- clocks : phandle to the AIC clock.
-- clock-names: must be set to "aic".
-- #sound-dai-cells: Must be set to 0.
-
-Example:
-
-codec: audio-codec@100200a4 {
-	compatible = "ingenic,jz4725b-codec";
-	reg = <0x100200a4 0x8>;
-
-	#sound-dai-cells = <0>;
-
-	clocks = <&cgu JZ4725B_CLK_AIC>;
-	clock-names = "aic";
-};

Documentation/devicetree/bindings/sound/ingenic,jz4740-codec.txt

@@ -1,20 +0,0 @@
-Ingenic JZ4740 codec controller
-
-Required properties:
-- compatible : "ingenic,jz4740-codec"
-- reg : codec registers location and length
-- clocks : phandle to the AIC clock.
-- clock-names: must be set to "aic".
-- #sound-dai-cells: Must be set to 0.
-
-Example:
-
-codec: audio-codec@10020080 {
-	compatible = "ingenic,jz4740-codec";
-	reg = <0x10020080 0x8>;
-
-	#sound-dai-cells = <0>;
-
-	clocks = <&cgu JZ4740_CLK_AIC>;
-	clock-names = "aic";
-};

Documentation/devicetree/bindings/sound/qcom,sdm845.txt

@@ -5,7 +5,10 @@ This binding describes the SDM845 sound card, which uses qdsp for audio.
 - compatible:
 	Usage: required
 	Value type: <stringlist>
-	Definition: must be "qcom,sdm845-sndcard"
+	Definition: must be one of this
+			"qcom,sdm845-sndcard"
+			"qcom,db845c-sndcard"
+			"lenovo,yoga-c630-sndcard"
 
 - audio-routing:
 	Usage: Optional

Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml

@@ -0,0 +1,175 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wcd934x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Qualcomm WCD9340/WCD9341 Audio Codec
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  Qualcomm WCD9340/WCD9341 Codec is a standalone Hi-Fi audio codec IC.
+  It has in-built Soundwire controller, pin controller, interrupt mux and
+  supports both I2S/I2C and SLIMbus audio interfaces.
+
+properties:
+  compatible:
+    const: slim217,250
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description: GPIO spec for reset line to use
+    maxItems: 1
+
+  slim-ifc-dev: true
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: extclk
+
+  vdd-buck-supply:
+    description: A reference to the 1.8V buck supply
+
+  vdd-buck-sido-supply:
+    description: A reference to the 1.8V SIDO buck supply
+
+  vdd-rx-supply:
+    description: A reference to the 1.8V rx supply
+
+  vdd-tx-supply:
+    description: A reference to the 1.8V tx supply
+
+  vdd-vbat-supply:
+    description: A reference to the vbat supply
+
+  vdd-io-supply:
+    description: A reference to the 1.8V I/O supply
+
+  vdd-micbias-supply:
+    description: A reference to the micbias supply
+
+  qcom,micbias1-microvolt:
+    description: micbias1 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias2-microvolt:
+    description: micbias2 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias3-microvolt:
+    description: micbias3 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  qcom,micbias4-microvolt:
+    description: micbias4 voltage
+    minimum: 1800000
+    maximum: 2850000
+
+  clock-output-names:
+    const: mclk
+
+  clock-frequency:
+    description: Clock frequency of output clk in Hz
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+
+  '#clock-cells':
+    const: 0
+
+  '#sound-dai-cells':
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  gpio@42:
+    type: object
+    allOf:
+      - $ref: ../gpio/qcom,wcd934x-gpio.yaml#
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    type: object
+    description: |
+      WCD934x subnode for each slave devices. Bindings of each subnodes
+      depends on the specific driver providing the functionality and
+      documented in their respective bindings.
+
+    properties:
+      reg:
+        maxItems: 1
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - slim-ifc-dev
+  - interrupts
+  - interrupt-controller
+  - clock-frequency
+  - clock-output-names
+  - qcom,micbias1-microvolt
+  - qcom,micbias2-microvolt
+  - qcom,micbias3-microvolt
+  - qcom,micbias4-microvolt
+  - "#interrupt-cells"
+  - "#clock-cells"
+  - "#sound-dai-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    codec@1,0{
+        compatible = "slim217,250";
+        reg  = <1 0>;
+        reset-gpios = <&tlmm 64 0>;
+        slim-ifc-dev  = <&wcd9340_ifd>;
+        #sound-dai-cells = <1>;
+        interrupt-parent = <&tlmm>;
+        interrupts = <54 4>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        #clock-cells = <0>;
+        clock-frequency = <9600000>;
+        clock-output-names = "mclk";
+        qcom,micbias1-microvolt = <1800000>;
+        qcom,micbias2-microvolt = <1800000>;
+        qcom,micbias3-microvolt = <1800000>;
+        qcom,micbias4-microvolt = <1800000>;
+        clock-names = "extclk";
+        clocks = <&rpmhcc 2>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        gpio@42 {
+            compatible = "qcom,wcd9340-gpio";
+            reg = <0x42 0x2>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
+
+...

Documentation/devicetree/bindings/sound/qcom,wsa881x.yaml

@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/qcom,wsa881x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for Qualcomm WSA8810/WSA8815 Class-D Smart Speaker Amplifier
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+description: |
+  WSA8810 is a class-D smart speaker amplifier and WSA8815
+  is a high-output power class-D smart speaker amplifier.
+  Their primary operating mode uses a SoundWire digital audio
+  interface. This binding is for SoundWire interface.
+
+properties:
+  compatible:
+    const: sdw10217201000
+
+  reg:
+    maxItems: 1
+
+  powerdown-gpios:
+    description: GPIO spec for Powerdown/Shutdown line to use
+    maxItems: 1
+
+  '#thermal-sensor-cells':
+    const: 0
+
+  '#sound-dai-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - powerdown-gpios
+  - "#thermal-sensor-cells"
+  - "#sound-dai-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    soundwire@c2d0000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x0c2d0000 0x2000>;
+
+        speaker@0,1 {
+            compatible = "sdw10217201000";
+            reg = <0 1>;
+            powerdown-gpios = <&wcdpinctrl 2 0>;
+            #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
+        };
+
+        speaker@0,2 {
+            compatible = "sdw10217201000";
+            reg = <0 2>;
+            powerdown-gpios = <&wcdpinctrl 2 0>;
+            #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
+        };
+    };
+
+...

Documentation/devicetree/bindings/sound/rt1015.txt

@@ -0,0 +1,17 @@
+RT1015 Mono Class D Audio Amplifier
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : "realtek,rt1015".
+
+- reg : The I2C address of the device.
+
+
+Example:
+
+rt1015: codec@28 {
+	compatible = "realtek,rt1015";
+	reg = <0x28>;
+};

Documentation/devicetree/bindings/sound/rt5645.txt

@@ -10,6 +10,10 @@ Required properties:
 
 - interrupts : The CODEC's interrupt output.
 
+- avdd-supply: Power supply for AVDD, providing 1.8V.
+
+- cpvdd-supply: Power supply for CPVDD, providing 3.5V.
+
 Optional properties:
 
 - hp-detect-gpios:

Documentation/devicetree/bindings/spi/allwinner,sun4i-a10-spi.yaml

@@ -11,7 +11,7 @@ allOf:
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   "#address-cells": true

Documentation/devicetree/bindings/spi/allwinner,sun6i-a31-spi.yaml

@@ -11,7 +11,7 @@ allOf:
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   "#address-cells": true

Documentation/devicetree/bindings/spi/spi-controller.yaml

@@ -111,7 +111,7 @@ patternProperties:
       spi-rx-bus-width:
         allOf:
           - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [ 1, 2, 4 ]
+          - enum: [ 1, 2, 4, 8 ]
           - default: 1
         description:
           Bus width to the SPI bus used for MISO.
@@ -123,7 +123,7 @@ patternProperties:
       spi-tx-bus-width:
         allOf:
           - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [ 1, 2, 4 ]
+          - enum: [ 1, 2, 4, 8 ]
           - default: 1
         description:
           Bus width to the SPI bus used for MOSI.

Documentation/devicetree/bindings/timer/allwinner,sun4i-a10-timer.yaml

@@ -8,7 +8,7 @@ title: Allwinner A10 Timer Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.yaml

@@ -8,7 +8,7 @@ title: Allwinner A13 High-Speed Timer Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.yaml

@@ -8,7 +8,7 @@ title: Allwinner A10 mUSB OTG Controller Device Tree Bindings
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   compatible:

Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml

@@ -11,7 +11,7 @@ allOf:
 
 maintainers:
   - Chen-Yu Tsai <wens@csie.org>
-  - Maxime Ripard <maxime.ripard@bootlin.com>
+  - Maxime Ripard <mripard@kernel.org>
 
 properties:
   compatible:

Documentation/features/debug/gcov-profile-all/arch-support.txt

@@ -23,7 +23,7 @@
     |    openrisc: | TODO |
     |      parisc: | TODO |
     |     powerpc: |  ok  |
-    |       riscv: | TODO |
+    |       riscv: |  ok  |
     |        s390: |  ok  |
     |          sh: |  ok  |
     |       sparc: | TODO |

Documentation/filesystems/erofs.txt

@@ -24,11 +24,11 @@ Here is the main features of EROFS:
  - Metadata & data could be mixed by design;
 
  - 2 inode versions for different requirements:
-                          v1            v2
+                          compact (v1)  extended (v2)
    Inode metadata size:   32 bytes      64 bytes
    Max file size:         4 GB          16 EB (also limited by max. vol size)
    Max uids/gids:         65536         4294967296
-   File creation time:    no            yes (64 + 32-bit timestamp)
+   File change time:      no            yes (64 + 32-bit timestamp)
    Max hardlinks:         65536         4294967296
    Metadata reserved:     4 bytes       14 bytes
 
@@ -39,7 +39,7 @@ Here is the main features of EROFS:
  - Support POSIX.1e ACLs by using xattrs;
 
  - Support transparent file compression as an option:
-   LZ4 algorithm with 4 KB fixed-output compression for high performance;
+   LZ4 algorithm with 4 KB fixed-sized output compression for high performance.
 
 The following git tree provides the file system user-space tools under
 development (ex, formatting tool mkfs.erofs):
@@ -85,7 +85,7 @@ All data areas should be aligned with the block size, but metadata areas
 may not. All metadatas can be now observed in two different spaces (views):
  1. Inode metadata space
     Each valid inode should be aligned with an inode slot, which is a fixed
-    value (32 bytes) and designed to be kept in line with v1 inode size.
+    value (32 bytes) and designed to be kept in line with compact inode size.
 
     Each inode can be directly found with the following formula:
          inode offset = meta_blkaddr * block_size + 32 * nid
@@ -117,10 +117,10 @@ may not. All metadatas can be now observed in two different spaces (views):
                                                        |-> aligned with 4B
 
     Inode could be 32 or 64 bytes, which can be distinguished from a common
-    field which all inode versions have -- i_advise:
+    field which all inode versions have -- i_format:
 
         __________________               __________________
-       |     i_advise     |             |     i_advise     |
+       |     i_format     |             |     i_format     |
        |__________________|             |__________________|
        |        ...       |             |        ...       |
        |                  |             |                  |
@@ -129,12 +129,13 @@ may not. All metadatas can be now observed in two different spaces (views):
                                         |__________________| 64 bytes
 
     Xattrs, extents, data inline are followed by the corresponding inode with
-    proper alignes, and they could be optional for different data mappings,
-    _currently_ there are totally 3 valid data mappings supported:
+    proper alignment, and they could be optional for different data mappings.
+    _currently_ total 4 valid data mappings are supported:
 
-     1) flat file data without data inline (no extent);
-     2) fixed-output size data compression (must have extents);
-     3) flat file data with tail-end data inline (no extent);
+     0  flat file data without data inline (no extent);
+     1  fixed-sized output data compression (with non-compacted indexes);
+     2  flat file data with tail packing data inline (no extent);
+     3  fixed-sized output data compression (with compacted indexes, v5.3+).
 
     The size of the optional xattrs is indicated by i_xattr_count in inode
     header. Large xattrs or xattrs shared by many different files can be
@@ -182,8 +183,8 @@ introduce another on-disk field at all.
 
 Compression
 -----------
-Currently, EROFS supports 4KB fixed-output clustersize transparent file
-compression, as illustrated below:
+Currently, EROFS supports 4KB fixed-sized output transparent file compression,
+as illustrated below:
 
          |---- Variant-Length Extent ----|-------- VLE --------|----- VLE -----
          clusterofs                      clusterofs            clusterofs

Documentation/filesystems/overlayfs.rst

@@ -1,3 +1,5 @@
+.. SPDX-License-Identifier: GPL-2.0
+
 Written by: Neil Brown
 Please see MAINTAINERS file for where to send questions.
 
@@ -181,7 +183,7 @@ Kernel config options:
     worried about backward compatibility with kernels that have the redirect_dir
     feature and follow redirects even if turned off.
 
-Module options (can also be changed through /sys/module/overlay/parameters/*):
+Module options (can also be changed through /sys/module/overlay/parameters/):
 
 - "redirect_dir=BOOL":
     See OVERLAY_FS_REDIRECT_DIR kernel config option above.
@@ -263,7 +265,7 @@ top, lower2 the middle and lower3 the bottom layer.
 
 
 Metadata only copy up
---------------------
+---------------------
 
 When metadata only copy up feature is enabled, overlayfs will only copy
 up metadata (as opposed to whole file), when a metadata specific operation
@@ -286,10 +288,10 @@ pointed by REDIRECT. This should not be possible on local system as setting
 "trusted." xattrs will require CAP_SYS_ADMIN. But it should be possible
 for untrusted layers like from a pen drive.
 
-Note: redirect_dir={off|nofollow|follow(*)} conflicts with metacopy=on, and
+Note: redirect_dir={off|nofollow|follow[*]} conflicts with metacopy=on, and
 results in an error.
 
-(*) redirect_dir=follow only conflicts with metacopy=on if upperdir=... is
+[*] redirect_dir=follow only conflicts with metacopy=on if upperdir=... is
 given.
 
 Sharing and copying layers

Documentation/kbuild/kconfig-language.rst

@@ -196,14 +196,11 @@ applicable everywhere (see syntax).
   or equal to the first symbol and smaller than or equal to the second
   symbol.
 
-- help text: "help" or "---help---"
+- help text: "help"
 
   This defines a help text. The end of the help text is determined by
   the indentation level, this means it ends at the first line which has
   a smaller indentation than the first line of the help text.
-  "---help---" and "help" do not differ in behaviour, "---help---" is
-  used to help visually separate configuration logic from help within
-  the file as an aid to developers.
 
 - misc options: "option" <symbol>[=<value>]
 

Documentation/kbuild/makefiles.rst

@@ -297,9 +297,19 @@ more details, with real examples.
 	If CONFIG_EXT2_FS is set to either 'y' (built-in) or 'm' (modular)
 	the corresponding obj- variable will be set, and kbuild will descend
 	down in the ext2 directory.
-	Kbuild only uses this information to decide that it needs to visit
-	the directory, it is the Makefile in the subdirectory that
-	specifies what is modular and what is built-in.
+
+	Kbuild uses this information not only to decide that it needs to visit
+	the directory, but also to decide whether or not to link objects from
+	the directory into vmlinux.
+
+	When Kbuild descends into the directory with 'y', all built-in objects
+	from that directory are combined into the built-in.a, which will be
+	eventually linked into vmlinux.
+
+	When Kbuild descends into the directory with 'm', in contrast, nothing
+	from that directory will be linked into vmlinux. If the Makefile in
+	that directory specifies obj-y, those objects will be left orphan.
+	It is very likely a bug of the Makefile or of dependencies in Kconfig.
 
 	It is good practice to use a `CONFIG_` variable when assigning directory
 	names. This allows kbuild to totally skip the directory if the

Documentation/media/v4l-drivers/meye.rst

@@ -95,7 +95,7 @@ so all video4linux tools (like xawtv) should work with this driver.
 
 Besides the video4linux interface, the driver has a private interface
 for accessing the Motion Eye extended parameters (camera sharpness,
-agc, video framerate), the shapshot and the MJPEG capture facilities.
+agc, video framerate), the snapshot and the MJPEG capture facilities.
 
 This interface consists of several ioctls (prototypes and structures
 can be found in include/linux/meye.h):

Documentation/networking/dsa/sja1105.rst

@@ -230,12 +230,6 @@ simultaneously on two ports. The driver checks the consistency of the schedules
 against this restriction and errors out when appropriate. Schedule analysis is
 needed to avoid this, which is outside the scope of the document.
 
-At the moment, the time-aware scheduler can only be triggered based on a
-standalone clock and not based on PTP time. This means the base-time argument
-from tc-taprio is ignored and the schedule starts right away. It also means it
-is more difficult to phase-align the scheduler with the other devices in the
-network.
-
 Device Tree bindings and board design
 =====================================
 

Documentation/networking/ip-sysctl.txt

@@ -603,7 +603,7 @@ tcp_synack_retries - INTEGER
 	with the current initial RTO of 1second. With this the final timeout
 	for a passive TCP connection will happen after 63seconds.
 
-tcp_syncookies - BOOLEAN
+tcp_syncookies - INTEGER
 	Only valid when the kernel was compiled with CONFIG_SYN_COOKIES
 	Send out syncookies when the syn backlog queue of a socket
 	overflows. This is to prevent against the common 'SYN flood attack'

Documentation/networking/j1939.rst

@@ -339,7 +339,7 @@ To claim an address following code example can be used:
 			.pgn = J1939_PGN_ADDRESS_CLAIMED,
 			.pgn_mask = J1939_PGN_PDU1_MAX,
 		}, {
-			.pgn = J1939_PGN_ADDRESS_REQUEST,
+			.pgn = J1939_PGN_REQUEST,
 			.pgn_mask = J1939_PGN_PDU1_MAX,
 		}, {
 			.pgn = J1939_PGN_ADDRESS_COMMANDED,

Documentation/networking/netdev-FAQ.rst

@@ -34,8 +34,8 @@ the names, the ``net`` tree is for fixes to existing code already in the
 mainline tree from Linus, and ``net-next`` is where the new code goes
 for the future release.  You can find the trees here:
 
-- https://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
-- https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
+- https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
+- https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
 
 Q: How often do changes from these trees make it to the mainline Linus tree?
 ----------------------------------------------------------------------------

Documentation/process/coding-style.rst

@@ -988,7 +988,7 @@ Similarly, if you need to calculate the size of some structure member, use
 
 .. code-block:: c
 
-	#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
+	#define sizeof_field(t, f) (sizeof(((t*)0)->f))
 
 There are also min() and max() macros that do strict type checking if you
 need them.  Feel free to peruse that header file to see what else is already

Documentation/process/embargoed-hardware-issues.rst

@@ -255,7 +255,7 @@ an involved disclosed party. The current ambassadors list:
   Red Hat	Josh Poimboeuf <jpoimboe@redhat.com>
   SUSE		Jiri Kosina <jkosina@suse.cz>
 
-  Amazon
+  Amazon	Peter Bowen <pzb@amzn.com>
   Google	Kees Cook <keescook@chromium.org>
   ============= ========================================================
 

Documentation/process/index.rst

@@ -60,6 +60,7 @@ lack of a better place.
    volatile-considered-harmful
    botching-up-ioctls
    clang-format
+   ../riscv/patch-acceptance
 
 .. only::  subproject and html
 

Documentation/riscv/index.rst

@@ -7,6 +7,7 @@ RISC-V architecture
 
     boot-image-header
     pmu
+    patch-acceptance
 
 .. only::  subproject and html
 

Documentation/riscv/patch-acceptance.rst

@@ -0,0 +1,35 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+arch/riscv maintenance guidelines for developers
+================================================
+
+Overview
+--------
+The RISC-V instruction set architecture is developed in the open:
+in-progress drafts are available for all to review and to experiment
+with implementations.  New module or extension drafts can change
+during the development process - sometimes in ways that are
+incompatible with previous drafts.  This flexibility can present a
+challenge for RISC-V Linux maintenance.  Linux maintainers disapprove
+of churn, and the Linux development process prefers well-reviewed and
+tested code over experimental code.  We wish to extend these same
+principles to the RISC-V-related code that will be accepted for
+inclusion in the kernel.
+
+Submit Checklist Addendum
+-------------------------
+We'll only accept patches for new modules or extensions if the
+specifications for those modules or extensions are listed as being
+"Frozen" or "Ratified" by the RISC-V Foundation.  (Developers may, of
+course, maintain their own Linux kernel trees that contain code for
+any draft extensions that they wish.)
+
+Additionally, the RISC-V specification allows implementors to create
+their own custom extensions.  These custom extensions aren't required
+to go through any review or ratification process by the RISC-V
+Foundation.  To avoid the maintenance complexity and potential
+performance impact of adding kernel code for implementor-specific
+RISC-V extensions, we'll only to accept patches for extensions that
+have been officially frozen or ratified by the RISC-V Foundation.
+(Implementors, may, of course, maintain their own Linux kernel trees
+containing code for any custom extensions that they wish.)

Documentation/scsi/smartpqi.txt

@@ -29,7 +29,7 @@ smartpqi specific entries in /sys
   smartpqi host attributes:
   -------------------------
   /sys/class/scsi_host/host*/rescan
-  /sys/class/scsi_host/host*/version
+  /sys/class/scsi_host/host*/driver_version
 
   The host rescan attribute is a write only attribute. Writing to this
   attribute will trigger the driver to scan for new, changed, or removed

Documentation/translations/it_IT/process/coding-style.rst

@@ -1005,7 +1005,7 @@ struttura, usate
 
 .. code-block:: c
 
-	#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
+	#define sizeof_field(t, f) (sizeof(((t*)0)->f))
 
 Ci sono anche le macro min() e max() che, se vi serve, effettuano un controllo
 rigido sui tipi.  Sentitevi liberi di leggere attentamente questo file

Documentation/translations/zh_CN/process/coding-style.rst

@@ -826,7 +826,7 @@ inline gcc 也可以自动使其内联。而且其他用户可能会要求移除
 
 .. code-block:: c
 
-	#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
+	#define sizeof_field(t, f) (sizeof(((t*)0)->f))
 
 还有可以做严格的类型检查的 min() 和 max() 宏，如果你需要可以使用它们。你可以
 自己看看那个头文件里还定义了什么你可以拿来用的东西，如果有定义的话，你就不应

MAINTAINERS

@@ -720,7 +720,7 @@ F:	Documentation/devicetree/bindings/i2c/i2c-altera.txt
 F:	drivers/i2c/busses/i2c-altera.c
 
 ALTERA MAILBOX DRIVER
-M:	Ley Foon Tan <lftan@altera.com>
+M:	Ley Foon Tan <ley.foon.tan@intel.com>
 L:	nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/mailbox/mailbox-altera.c
@@ -771,6 +771,8 @@ F:	drivers/thermal/thermal_mmio.c
 
 AMAZON ETHERNET DRIVERS
 M:	Netanel Belgazal <netanel@amazon.com>
+M:	Arthur Kiyanovski <akiyano@amazon.com>
+R:	Guy Tzalik <gtzalik@amazon.com>
 R:	Saeed Bishara <saeedb@amazon.com>
 R:	Zorik Machulsky <zorik@amazon.com>
 L:	netdev@vger.kernel.org
@@ -1405,7 +1407,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
 
 ARM/ACTIONS SEMI ARCHITECTURE
 M:	Andreas Färber <afaerber@suse.de>
-R:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+M:	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 N:	owl
@@ -2272,6 +2274,7 @@ F:	drivers/*/*s3c64xx*
 F:	drivers/*/*s5pv210*
 F:	drivers/memory/samsung/
 F:	drivers/soc/samsung/
+F:	drivers/tty/serial/samsung*
 F:	include/linux/soc/samsung/
 F:	Documentation/arm/samsung/
 F:	Documentation/devicetree/bindings/arm/samsung/
@@ -3147,7 +3150,7 @@ S:	Maintained
 F:	arch/mips/net/
 
 BPF JIT for NFP NICs
-M:	Jakub Kicinski <jakub.kicinski@netronome.com>
+M:	Jakub Kicinski <kuba@kernel.org>
 L:	netdev@vger.kernel.org
 L:	bpf@vger.kernel.org
 S:	Supported
@@ -4970,6 +4973,7 @@ F:	include/linux/dma-buf*
 F:	include/linux/reservation.h
 F:	include/linux/*fence.h
 F:	Documentation/driver-api/dma-buf.rst
+K:	dma_(buf|fence|resv)
 T:	git git://anongit.freedesktop.org/drm/drm-misc
 
 DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
@@ -4999,7 +5003,7 @@ F:	include/linux/dma-mapping.h
 F:	include/linux/dma-noncoherent.h
 
 DMC FREQUENCY DRIVER FOR SAMSUNG EXYNOS5422
-M:	Lukasz Luba <l.luba@partner.samsung.com>
+M:	Lukasz Luba <lukasz.luba@arm.com>
 L:	linux-pm@vger.kernel.org
 L:	linux-samsung-soc@vger.kernel.org
 S:	Maintained
@@ -6025,6 +6029,7 @@ M:	Yash Shah <yash.shah@sifive.com>
 L:	linux-edac@vger.kernel.org
 S:	Supported
 F:	drivers/edac/sifive_edac.c
+F:	drivers/soc/sifive_l2_cache.c
 
 EDAC-SKYLAKE
 M:	Tony Luck <tony.luck@intel.com>
@@ -7031,6 +7036,7 @@ L:	linux-acpi@vger.kernel.org
 S:	Maintained
 F:	Documentation/firmware-guide/acpi/gpio-properties.rst
 F:	drivers/gpio/gpiolib-acpi.c
+F:	drivers/gpio/gpiolib-acpi.h
 
 GPIO IR Transmitter
 M:	Sean Young <sean@mess.org>
@@ -9038,7 +9044,6 @@ F:	include/linux/umh.h
 
 KERNEL VIRTUAL MACHINE (KVM)
 M:	Paolo Bonzini <pbonzini@redhat.com>
-M:	Radim Krčmář <rkrcmar@redhat.com>
 L:	kvm@vger.kernel.org
 W:	http://www.linux-kvm.org
 T:	git git://git.kernel.org/pub/scm/virt/kvm/kvm.git
@@ -9073,9 +9078,9 @@ F:	virt/kvm/arm/
 F:	include/kvm/arm_*
 
 KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
-M:	James Hogan <jhogan@kernel.org>
 L:	linux-mips@vger.kernel.org
-S:	Supported
+L:	kvm@vger.kernel.org
+S:	Orphan
 F:	arch/mips/include/uapi/asm/kvm*
 F:	arch/mips/include/asm/kvm*
 F:	arch/mips/kvm/
@@ -9110,7 +9115,6 @@ F:	tools/testing/selftests/kvm/*/s390x/
 
 KERNEL VIRTUAL MACHINE FOR X86 (KVM/x86)
 M:	Paolo Bonzini <pbonzini@redhat.com>
-M:	Radim Krčmář <rkrcmar@redhat.com>
 R:	Sean Christopherson <sean.j.christopherson@intel.com>
 R:	Vitaly Kuznetsov <vkuznets@redhat.com>
 R:	Wanpeng Li <wanpengli@tencent.com>
@@ -10108,6 +10112,7 @@ S:	Maintained
 F:	drivers/media/radio/radio-maxiradio*
 
 MCAN MMIO DEVICE DRIVER
+M:	Dan Murphy <dmurphy@ti.com>
 M:	Sriram Dash <sriram.dash@samsung.com>
 L:	linux-can@vger.kernel.org
 S:	Maintained
@@ -11426,7 +11431,7 @@ F:	include/uapi/linux/netrom.h
 F:	net/netrom/
 
 NETRONOME ETHERNET DRIVERS
-M:	Jakub Kicinski <jakub.kicinski@netronome.com>
+M:	Jakub Kicinski <kuba@kernel.org>
 L:	oss-drivers@netronome.com
 S:	Maintained
 F:	drivers/net/ethernet/netronome/
@@ -11455,8 +11460,8 @@ M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
 S:	Odd Fixes
 F:	Documentation/devicetree/bindings/net/
 F:	drivers/net/
@@ -11497,8 +11502,8 @@ M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
 Q:	http://patchwork.ozlabs.org/project/netdev/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git
 B:	mailto:netdev@vger.kernel.org
 S:	Maintained
 F:	net/
@@ -11543,7 +11548,7 @@ M:	"David S. Miller" <davem@davemloft.net>
 M:	Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
 M:	Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
 L:	netdev@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net.git
 S:	Maintained
 F:	net/ipv4/
 F:	net/ipv6/
@@ -11586,7 +11591,7 @@ M:	Boris Pismenny <borisp@mellanox.com>
 M:	Aviad Yehezkel <aviadye@mellanox.com>
 M:	John Fastabend <john.fastabend@gmail.com>
 M:	Daniel Borkmann <daniel@iogearbox.net>
-M:	Jakub Kicinski <jakub.kicinski@netronome.com>
+M:	Jakub Kicinski <kuba@kernel.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	net/tls/*
@@ -11598,7 +11603,7 @@ L:	linux-wireless@vger.kernel.org
 Q:	http://patchwork.kernel.org/project/linux-wireless/list/
 
 NETDEVSIM
-M:	Jakub Kicinski <jakub.kicinski@netronome.com>
+M:	Jakub Kicinski <kuba@kernel.org>
 S:	Maintained
 F:	drivers/net/netdevsim/*
 
@@ -11675,7 +11680,7 @@ F:	Documentation/scsi/NinjaSCSI.txt
 F:	drivers/scsi/nsp32*
 
 NIOS2 ARCHITECTURE
-M:	Ley Foon Tan <lftan@altera.com>
+M:	Ley Foon Tan <ley.foon.tan@intel.com>
 L:	nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2.git
 S:	Maintained
@@ -12393,7 +12398,7 @@ L:	linux-unionfs@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs.git
 S:	Supported
 F:	fs/overlayfs/
-F:	Documentation/filesystems/overlayfs.txt
+F:	Documentation/filesystems/overlayfs.rst
 
 P54 WIRELESS DRIVER
 M:	Christian Lamparter <chunkeey@googlemail.com>
@@ -12559,7 +12564,7 @@ F:	Documentation/devicetree/bindings/pci/aardvark-pci.txt
 F:	drivers/pci/controller/pci-aardvark.c
 
 PCI DRIVER FOR ALTERA PCIE IP
-M:	Ley Foon Tan <lftan@altera.com>
+M:	Ley Foon Tan <ley.foon.tan@intel.com>
 L:	rfi@lists.rocketboards.org (moderated for non-subscribers)
 L:	linux-pci@vger.kernel.org
 S:	Supported
@@ -12738,7 +12743,7 @@ S:	Supported
 F:	Documentation/PCI/pci-error-recovery.rst
 
 PCI MSI DRIVER FOR ALTERA MSI IP
-M:	Ley Foon Tan <lftan@altera.com>
+M:	Ley Foon Tan <ley.foon.tan@intel.com>
 L:	rfi@lists.rocketboards.org (moderated for non-subscribers)
 L:	linux-pci@vger.kernel.org
 S:	Supported
@@ -13674,7 +13679,6 @@ F:	drivers/net/ethernet/qualcomm/emac/
 
 QUALCOMM ETHQOS ETHERNET DRIVER
 M:	Vinod Koul <vkoul@kernel.org>
-M:	Niklas Cassel <niklas.cassel@linaro.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -13708,6 +13712,15 @@ L:	linux-arm-msm@vger.kernel.org
 S:	Maintained
 F:	drivers/iommu/qcom_iommu.c
 
+QUALCOMM RMNET DRIVER
+M:	Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
+M:	Sean Tranchetti <stranche@codeaurora.org>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/ethernet/qualcomm/rmnet/
+F:	Documentation/networking/device_drivers/qualcomm/rmnet.txt
+F:	include/linux/if_rmnet.h
+
 QUALCOMM TSENS THERMAL DRIVER
 M:	Amit Kucheria <amit.kucheria@linaro.org>
 L:	linux-pm@vger.kernel.org
@@ -14107,6 +14120,7 @@ M:	Paul Walmsley <paul.walmsley@sifive.com>
 M:	Palmer Dabbelt <palmer@dabbelt.com>
 M:	Albert Ou <aou@eecs.berkeley.edu>
 L:	linux-riscv@lists.infradead.org
+P:	Documentation/riscv/patch-acceptance.rst
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git
 S:	Supported
 F:	arch/riscv/
@@ -14534,8 +14548,6 @@ F:	include/linux/platform_data/spi-s3c64xx.h
 
 SAMSUNG SXGBE DRIVERS
 M:	Byungho An <bh74.an@samsung.com>
-M:	Girish K S <ks.giri@samsung.com>
-M:	Vipul Pandya <vipul.pandya@samsung.com>
 S:	Supported
 L:	netdev@vger.kernel.org
 F:	drivers/net/ethernet/samsung/sxgbe/
@@ -16314,12 +16326,10 @@ F:	drivers/media/radio/radio-raremono.c
 
 THERMAL
 M:	Zhang Rui <rui.zhang@intel.com>
-M:	Eduardo Valentin <edubezval@gmail.com>
-R:	Daniel Lezcano <daniel.lezcano@linaro.org>
+M:	Daniel Lezcano <daniel.lezcano@linaro.org>
 R:	Amit Kucheria <amit.kucheria@verdurent.com>
 L:	linux-pm@vger.kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
 Q:	https://patchwork.kernel.org/project/linux-pm/list/
 S:	Supported
 F:	drivers/thermal/
@@ -16533,6 +16543,13 @@ L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Odd Fixes
 F:	sound/soc/codecs/tas571x*
 
+TI TCAN4X5X DEVICE DRIVER
+M:	Dan Murphy <dmurphy@ti.com>
+L:	linux-can@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/can/tcan4x5x.txt
+F:	drivers/net/can/m_can/tcan4x5x.c
+
 TI TRF7970A NFC DRIVER
 M:	Mark Greer <mgreer@animalcreek.com>
 L:	linux-wireless@vger.kernel.org
@@ -18025,7 +18042,7 @@ XDP (eXpress Data Path)
 M:	Alexei Starovoitov <ast@kernel.org>
 M:	Daniel Borkmann <daniel@iogearbox.net>
 M:	David S. Miller <davem@davemloft.net>
-M:	Jakub Kicinski <jakub.kicinski@netronome.com>
+M:	Jakub Kicinski <kuba@kernel.org>
 M:	Jesper Dangaard Brouer <hawk@kernel.org>
 M:	John Fastabend <john.fastabend@gmail.com>
 L:	netdev@vger.kernel.org

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc7
 NAME = Kleptomaniac Octopus
 
 # *DOCUMENTATION*
@@ -414,6 +414,7 @@ STRIP		= $(CROSS_COMPILE)strip
 OBJCOPY		= $(CROSS_COMPILE)objcopy
 OBJDUMP		= $(CROSS_COMPILE)objdump
 OBJSIZE		= $(CROSS_COMPILE)size
+READELF		= $(CROSS_COMPILE)readelf
 PAHOLE		= pahole
 LEX		= flex
 YACC		= bison
@@ -472,7 +473,7 @@ GCC_PLUGINS_CFLAGS :=
 CLANG_FLAGS :=
 
 export ARCH SRCARCH CONFIG_SHELL BASH HOSTCC KBUILD_HOSTCFLAGS CROSS_COMPILE AS LD CC
-export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE PAHOLE LEX YACC AWK INSTALLKERNEL
+export CPP AR NM STRIP OBJCOPY OBJDUMP OBJSIZE READELF PAHOLE LEX YACC AWK INSTALLKERNEL
 export PERL PYTHON PYTHON2 PYTHON3 CHECK CHECKFLAGS MAKE UTS_MACHINE HOSTCXX
 export KBUILD_HOSTCXXFLAGS KBUILD_HOSTLDFLAGS KBUILD_HOSTLDLIBS LDFLAGS_MODULE