mtd: st_spi_fsm: replace FLACH_CMD_* with SPINOR_OP_*

Begin to unify the differences between serial_flash_cmds.h and
spi-nor.h.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
This commit is contained in:
Brian Norris 2014-04-08 18:56:06 -07:00
parent a402191e9b
commit 92d3af9ac3
2 changed files with 87 additions and 87 deletions

View file

@ -13,43 +13,43 @@
#define _MTD_SERIAL_FLASH_CMDS_H
/* Generic Flash Commands/OPCODEs */
#define FLASH_CMD_WREN 0x06
#define FLASH_CMD_WRDI 0x04
#define FLASH_CMD_RDID 0x9f
#define FLASH_CMD_RDSR 0x05
#define FLASH_CMD_RDSR2 0x35
#define FLASH_CMD_WRSR 0x01
#define FLASH_CMD_SE_4K 0x20
#define FLASH_CMD_SE_32K 0x52
#define FLASH_CMD_SE 0xd8
#define FLASH_CMD_CHIPERASE 0xc7
#define FLASH_CMD_WRVCR 0x81
#define FLASH_CMD_RDVCR 0x85
#define SPINOR_OP_WREN 0x06
#define SPINOR_OP_WRDI 0x04
#define SPINOR_OP_RDID 0x9f
#define SPINOR_OP_RDSR 0x05
#define SPINOR_OP_RDSR2 0x35
#define SPINOR_OP_WRSR 0x01
#define SPINOR_OP_SE_4K 0x20
#define SPINOR_OP_SE_32K 0x52
#define SPINOR_OP_SE 0xd8
#define SPINOR_OP_CHIPERASE 0xc7
#define SPINOR_OP_WRVCR 0x81
#define SPINOR_OP_RDVCR 0x85
/* JEDEC Standard - Serial Flash Discoverable Parmeters (SFDP) Commands */
#define FLASH_CMD_READ 0x03 /* READ */
#define FLASH_CMD_READ_FAST 0x0b /* FAST READ */
#define FLASH_CMD_READ_1_1_2 0x3b /* DUAL OUTPUT READ */
#define FLASH_CMD_READ_1_2_2 0xbb /* DUAL I/O READ */
#define FLASH_CMD_READ_1_1_4 0x6b /* QUAD OUTPUT READ */
#define FLASH_CMD_READ_1_4_4 0xeb /* QUAD I/O READ */
#define SPINOR_OP_READ 0x03 /* READ */
#define SPINOR_OP_READ_FAST 0x0b /* FAST READ */
#define SPINOR_OP_READ_1_1_2 0x3b /* DUAL OUTPUT READ */
#define SPINOR_OP_READ_1_2_2 0xbb /* DUAL I/O READ */
#define SPINOR_OP_READ_1_1_4 0x6b /* QUAD OUTPUT READ */
#define SPINOR_OP_READ_1_4_4 0xeb /* QUAD I/O READ */
#define FLASH_CMD_WRITE 0x02 /* PAGE PROGRAM */
#define FLASH_CMD_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */
#define FLASH_CMD_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */
#define FLASH_CMD_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */
#define FLASH_CMD_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */
#define SPINOR_OP_WRITE 0x02 /* PAGE PROGRAM */
#define SPINOR_OP_WRITE_1_1_2 0xa2 /* DUAL INPUT PROGRAM */
#define SPINOR_OP_WRITE_1_2_2 0xd2 /* DUAL INPUT EXT PROGRAM */
#define SPINOR_OP_WRITE_1_1_4 0x32 /* QUAD INPUT PROGRAM */
#define SPINOR_OP_WRITE_1_4_4 0x12 /* QUAD INPUT EXT PROGRAM */
#define FLASH_CMD_EN4B_ADDR 0xb7 /* Enter 4-byte address mode */
#define FLASH_CMD_EX4B_ADDR 0xe9 /* Exit 4-byte address mode */
#define SPINOR_OP_EN4B_ADDR 0xb7 /* Enter 4-byte address mode */
#define SPINOR_OP_EX4B_ADDR 0xe9 /* Exit 4-byte address mode */
/* READ commands with 32-bit addressing */
#define FLASH_CMD_READ4 0x13
#define FLASH_CMD_READ4_FAST 0x0c
#define FLASH_CMD_READ4_1_1_2 0x3c
#define FLASH_CMD_READ4_1_2_2 0xbc
#define FLASH_CMD_READ4_1_1_4 0x6c
#define FLASH_CMD_READ4_1_4_4 0xec
#define SPINOR_OP_READ4 0x13
#define SPINOR_OP_READ4_FAST 0x0c
#define SPINOR_OP_READ4_1_1_2 0x3c
#define SPINOR_OP_READ4_1_2_2 0xbc
#define SPINOR_OP_READ4_1_1_4 0x6c
#define SPINOR_OP_READ4_1_4_4 0xec
/* Configuration flags */
#define FLASH_FLAG_SINGLE 0x000000ff

View file

@ -208,7 +208,7 @@
#define S25FL_CMD_DYBWR 0xe1
#define S25FL_CMD_DYBRD 0xe0
#define S25FL_CMD_WRITE4 0x12 /* Note, opcode clashes with
* 'FLASH_CMD_WRITE_1_4_4'
* 'SPINOR_OP_WRITE_1_4_4'
* as found on N25Qxxx devices! */
/* Status register */
@ -296,7 +296,7 @@ struct flash_info {
u32 jedec_id;
u16 ext_id;
/*
* The size listed here is what works with FLASH_CMD_SE, which isn't
* The size listed here is what works with SPINOR_OP_SE, which isn't
* necessarily called a "sector" by the vendor.
*/
unsigned sector_size;
@ -451,22 +451,22 @@ static struct flash_info flash_types[] = {
/* Default READ configurations, in order of preference */
static struct seq_rw_config default_read_configs[] = {
{FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ_1_4_4, 0, 4, 4, 0x00, 2, 4},
{FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ_1_1_4, 0, 1, 4, 0x00, 4, 0},
{FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ_1_2_2, 0, 2, 2, 0x00, 4, 0},
{FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ_1_1_2, 0, 1, 2, 0x00, 0, 8},
{FLASH_FLAG_READ_FAST, FLASH_CMD_READ_FAST, 0, 1, 1, 0x00, 0, 8},
{FLASH_FLAG_READ_WRITE, FLASH_CMD_READ, 0, 1, 1, 0x00, 0, 0},
{FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4, 0, 4, 4, 0x00, 2, 4},
{FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4, 0, 1, 4, 0x00, 4, 0},
{FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2, 0, 2, 2, 0x00, 4, 0},
{FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2, 0, 1, 2, 0x00, 0, 8},
{FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST, 0, 1, 1, 0x00, 0, 8},
{FLASH_FLAG_READ_WRITE, SPINOR_OP_READ, 0, 1, 1, 0x00, 0, 0},
{0x00, 0, 0, 0, 0, 0x00, 0, 0},
};
/* Default WRITE configurations */
static struct seq_rw_config default_write_configs[] = {
{FLASH_FLAG_WRITE_1_4_4, FLASH_CMD_WRITE_1_4_4, 1, 4, 4, 0x00, 0, 0},
{FLASH_FLAG_WRITE_1_1_4, FLASH_CMD_WRITE_1_1_4, 1, 1, 4, 0x00, 0, 0},
{FLASH_FLAG_WRITE_1_2_2, FLASH_CMD_WRITE_1_2_2, 1, 2, 2, 0x00, 0, 0},
{FLASH_FLAG_WRITE_1_1_2, FLASH_CMD_WRITE_1_1_2, 1, 1, 2, 0x00, 0, 0},
{FLASH_FLAG_READ_WRITE, FLASH_CMD_WRITE, 1, 1, 1, 0x00, 0, 0},
{FLASH_FLAG_WRITE_1_4_4, SPINOR_OP_WRITE_1_4_4, 1, 4, 4, 0x00, 0, 0},
{FLASH_FLAG_WRITE_1_1_4, SPINOR_OP_WRITE_1_1_4, 1, 1, 4, 0x00, 0, 0},
{FLASH_FLAG_WRITE_1_2_2, SPINOR_OP_WRITE_1_2_2, 1, 2, 2, 0x00, 0, 0},
{FLASH_FLAG_WRITE_1_1_2, SPINOR_OP_WRITE_1_1_2, 1, 1, 2, 0x00, 0, 0},
{FLASH_FLAG_READ_WRITE, SPINOR_OP_WRITE, 1, 1, 1, 0x00, 0, 0},
{0x00, 0, 0, 0, 0, 0x00, 0, 0},
};
@ -489,12 +489,12 @@ static struct seq_rw_config default_write_configs[] = {
* cycles.
*/
static struct seq_rw_config n25q_read3_configs[] = {
{FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ_1_4_4, 0, 4, 4, 0x00, 0, 8},
{FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ_1_1_4, 0, 1, 4, 0x00, 0, 8},
{FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ_1_2_2, 0, 2, 2, 0x00, 0, 8},
{FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ_1_1_2, 0, 1, 2, 0x00, 0, 8},
{FLASH_FLAG_READ_FAST, FLASH_CMD_READ_FAST, 0, 1, 1, 0x00, 0, 8},
{FLASH_FLAG_READ_WRITE, FLASH_CMD_READ, 0, 1, 1, 0x00, 0, 0},
{FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ_1_4_4, 0, 4, 4, 0x00, 0, 8},
{FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ_1_1_4, 0, 1, 4, 0x00, 0, 8},
{FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ_1_2_2, 0, 2, 2, 0x00, 0, 8},
{FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ_1_1_2, 0, 1, 2, 0x00, 0, 8},
{FLASH_FLAG_READ_FAST, SPINOR_OP_READ_FAST, 0, 1, 1, 0x00, 0, 8},
{FLASH_FLAG_READ_WRITE, SPINOR_OP_READ, 0, 1, 1, 0x00, 0, 0},
{0x00, 0, 0, 0, 0, 0x00, 0, 0},
};
@ -504,12 +504,12 @@ static struct seq_rw_config n25q_read3_configs[] = {
* - 'FAST' variants configured for 8 dummy cycles (see note above.)
*/
static struct seq_rw_config n25q_read4_configs[] = {
{FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ4_1_4_4, 0, 4, 4, 0x00, 0, 8},
{FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8},
{FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ4_1_2_2, 0, 2, 2, 0x00, 0, 8},
{FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8},
{FLASH_FLAG_READ_FAST, FLASH_CMD_READ4_FAST, 0, 1, 1, 0x00, 0, 8},
{FLASH_FLAG_READ_WRITE, FLASH_CMD_READ4, 0, 1, 1, 0x00, 0, 0},
{FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 0, 8},
{FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8},
{FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 0, 8},
{FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8},
{FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8},
{FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0},
{0x00, 0, 0, 0, 0, 0x00, 0, 0},
};
@ -522,7 +522,7 @@ static int stfsm_mx25_en_32bit_addr_seq(struct stfsm_seq *seq)
{
seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(FLASH_CMD_EN4B_ADDR) |
SEQ_OPC_OPCODE(SPINOR_OP_EN4B_ADDR) |
SEQ_OPC_CSDEASSERT);
seq->seq[0] = STFSM_INST_CMD1;
@ -550,12 +550,12 @@ static int stfsm_mx25_en_32bit_addr_seq(struct stfsm_seq *seq)
* entering a state that is incompatible with the SPIBoot Controller.
*/
static struct seq_rw_config stfsm_s25fl_read4_configs[] = {
{FLASH_FLAG_READ_1_4_4, FLASH_CMD_READ4_1_4_4, 0, 4, 4, 0x00, 2, 4},
{FLASH_FLAG_READ_1_1_4, FLASH_CMD_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8},
{FLASH_FLAG_READ_1_2_2, FLASH_CMD_READ4_1_2_2, 0, 2, 2, 0x00, 4, 0},
{FLASH_FLAG_READ_1_1_2, FLASH_CMD_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8},
{FLASH_FLAG_READ_FAST, FLASH_CMD_READ4_FAST, 0, 1, 1, 0x00, 0, 8},
{FLASH_FLAG_READ_WRITE, FLASH_CMD_READ4, 0, 1, 1, 0x00, 0, 0},
{FLASH_FLAG_READ_1_4_4, SPINOR_OP_READ4_1_4_4, 0, 4, 4, 0x00, 2, 4},
{FLASH_FLAG_READ_1_1_4, SPINOR_OP_READ4_1_1_4, 0, 1, 4, 0x00, 0, 8},
{FLASH_FLAG_READ_1_2_2, SPINOR_OP_READ4_1_2_2, 0, 2, 2, 0x00, 4, 0},
{FLASH_FLAG_READ_1_1_2, SPINOR_OP_READ4_1_1_2, 0, 1, 2, 0x00, 0, 8},
{FLASH_FLAG_READ_FAST, SPINOR_OP_READ4_FAST, 0, 1, 1, 0x00, 0, 8},
{FLASH_FLAG_READ_WRITE, SPINOR_OP_READ4, 0, 1, 1, 0x00, 0, 0},
{0x00, 0, 0, 0, 0, 0x00, 0, 0},
};
@ -574,7 +574,7 @@ static struct stfsm_seq stfsm_seq_read_jedec = {
.data_size = TRANSFER_SIZE(8),
.seq_opc[0] = (SEQ_OPC_PADS_1 |
SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(FLASH_CMD_RDID)),
SEQ_OPC_OPCODE(SPINOR_OP_RDID)),
.seq = {
STFSM_INST_CMD1,
STFSM_INST_DATA_READ,
@ -590,7 +590,7 @@ static struct stfsm_seq stfsm_seq_read_status_fifo = {
.data_size = TRANSFER_SIZE(4),
.seq_opc[0] = (SEQ_OPC_PADS_1 |
SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(FLASH_CMD_RDSR)),
SEQ_OPC_OPCODE(SPINOR_OP_RDSR)),
.seq = {
STFSM_INST_CMD1,
STFSM_INST_DATA_READ,
@ -606,10 +606,10 @@ static struct stfsm_seq stfsm_seq_erase_sector = {
/* 'addr_cfg' configured during initialisation */
.seq_opc = {
(SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT),
SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT),
(SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(FLASH_CMD_SE)),
SEQ_OPC_OPCODE(SPINOR_OP_SE)),
},
.seq = {
STFSM_INST_CMD1,
@ -627,10 +627,10 @@ static struct stfsm_seq stfsm_seq_erase_sector = {
static struct stfsm_seq stfsm_seq_erase_chip = {
.seq_opc = {
(SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT),
SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT),
(SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(FLASH_CMD_CHIPERASE) | SEQ_OPC_CSDEASSERT),
SEQ_OPC_OPCODE(SPINOR_OP_CHIPERASE) | SEQ_OPC_CSDEASSERT),
},
.seq = {
STFSM_INST_CMD1,
@ -647,9 +647,9 @@ static struct stfsm_seq stfsm_seq_erase_chip = {
static struct stfsm_seq stfsm_seq_write_status = {
.seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(FLASH_CMD_WREN) | SEQ_OPC_CSDEASSERT),
SEQ_OPC_OPCODE(SPINOR_OP_WREN) | SEQ_OPC_CSDEASSERT),
.seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(FLASH_CMD_WRSR)),
SEQ_OPC_OPCODE(SPINOR_OP_WRSR)),
.seq = {
STFSM_INST_CMD1,
STFSM_INST_CMD2,
@ -665,9 +665,9 @@ static struct stfsm_seq stfsm_seq_write_status = {
static int stfsm_n25q_en_32bit_addr_seq(struct stfsm_seq *seq)
{
seq->seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(FLASH_CMD_EN4B_ADDR));
SEQ_OPC_OPCODE(SPINOR_OP_EN4B_ADDR));
seq->seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(FLASH_CMD_WREN) |
SEQ_OPC_OPCODE(SPINOR_OP_WREN) |
SEQ_OPC_CSDEASSERT);
seq->seq[0] = STFSM_INST_CMD2;
@ -788,7 +788,7 @@ static int stfsm_write_fifo(struct stfsm *fsm, const uint32_t *buf,
static int stfsm_enter_32bit_addr(struct stfsm *fsm, int enter)
{
struct stfsm_seq *seq = &fsm->stfsm_seq_en_32bit_addr;
uint32_t cmd = enter ? FLASH_CMD_EN4B_ADDR : FLASH_CMD_EX4B_ADDR;
uint32_t cmd = enter ? SPINOR_OP_EN4B_ADDR : SPINOR_OP_EX4B_ADDR;
seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
SEQ_OPC_CYCLES(8) |
@ -812,7 +812,7 @@ static uint8_t stfsm_wait_busy(struct stfsm *fsm)
/* Use RDRS1 */
seq->seq_opc[0] = (SEQ_OPC_PADS_1 |
SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(FLASH_CMD_RDSR));
SEQ_OPC_OPCODE(SPINOR_OP_RDSR));
/* Load read_status sequence */
stfsm_load_seq(fsm, seq);
@ -985,7 +985,7 @@ static void stfsm_prepare_rw_seq(struct stfsm *fsm,
if (cfg->write)
seq->seq_opc[i++] = (SEQ_OPC_PADS_1 |
SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(FLASH_CMD_WREN) |
SEQ_OPC_OPCODE(SPINOR_OP_WREN) |
SEQ_OPC_CSDEASSERT);
/* Address configuration (24 or 32-bit addresses) */
@ -1121,21 +1121,21 @@ static int stfsm_mx25_config(struct stfsm *fsm)
}
/* Check status of 'QE' bit, update if required. */
stfsm_read_status(fsm, FLASH_CMD_RDSR, &sta, 1);
stfsm_read_status(fsm, SPINOR_OP_RDSR, &sta, 1);
data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
if (data_pads == 4) {
if (!(sta & MX25_STATUS_QE)) {
/* Set 'QE' */
sta |= MX25_STATUS_QE;
stfsm_write_status(fsm, FLASH_CMD_WRSR, sta, 1, 1);
stfsm_write_status(fsm, SPINOR_OP_WRSR, sta, 1, 1);
}
} else {
if (sta & MX25_STATUS_QE) {
/* Clear 'QE' */
sta &= ~MX25_STATUS_QE;
stfsm_write_status(fsm, FLASH_CMD_WRSR, sta, 1, 1);
stfsm_write_status(fsm, SPINOR_OP_WRSR, sta, 1, 1);
}
}
@ -1260,7 +1260,7 @@ static void stfsm_s25fl_write_dyb(struct stfsm *fsm, uint32_t offs, uint8_t dby)
{
struct stfsm_seq seq = {
.seq_opc[0] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(FLASH_CMD_WREN) |
SEQ_OPC_OPCODE(SPINOR_OP_WREN) |
SEQ_OPC_CSDEASSERT),
.seq_opc[1] = (SEQ_OPC_PADS_1 | SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(S25FL_CMD_DYBWR)),
@ -1300,7 +1300,7 @@ static int stfsm_s25fl_clear_status_reg(struct stfsm *fsm)
SEQ_OPC_CSDEASSERT),
.seq_opc[1] = (SEQ_OPC_PADS_1 |
SEQ_OPC_CYCLES(8) |
SEQ_OPC_OPCODE(FLASH_CMD_WRDI) |
SEQ_OPC_OPCODE(SPINOR_OP_WRDI) |
SEQ_OPC_CSDEASSERT),
.seq = {
STFSM_INST_CMD1,
@ -1379,7 +1379,7 @@ static int stfsm_s25fl_config(struct stfsm *fsm)
}
/* Check status of 'QE' bit, update if required. */
stfsm_read_status(fsm, FLASH_CMD_RDSR2, &cr1, 1);
stfsm_read_status(fsm, SPINOR_OP_RDSR2, &cr1, 1);
data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
if (data_pads == 4) {
if (!(cr1 & STFSM_S25FL_CONFIG_QE)) {
@ -1397,9 +1397,9 @@ static int stfsm_s25fl_config(struct stfsm *fsm)
}
}
if (update_sr) {
stfsm_read_status(fsm, FLASH_CMD_RDSR, &sr1, 1);
stfsm_read_status(fsm, SPINOR_OP_RDSR, &sr1, 1);
sta_wr = ((uint16_t)cr1 << 8) | sr1;
stfsm_write_status(fsm, FLASH_CMD_WRSR, sta_wr, 2, 1);
stfsm_write_status(fsm, SPINOR_OP_WRSR, sta_wr, 2, 1);
}
/*
@ -1424,7 +1424,7 @@ static int stfsm_w25q_config(struct stfsm *fsm)
return ret;
/* Check status of 'QE' bit, update if required. */
stfsm_read_status(fsm, FLASH_CMD_RDSR2, &sr2, 1);
stfsm_read_status(fsm, SPINOR_OP_RDSR2, &sr2, 1);
data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1;
if (data_pads == 4) {
if (!(sr2 & W25Q_STATUS_QE)) {
@ -1441,9 +1441,9 @@ static int stfsm_w25q_config(struct stfsm *fsm)
}
if (update_sr) {
/* Write status register */
stfsm_read_status(fsm, FLASH_CMD_RDSR, &sr1, 1);
stfsm_read_status(fsm, SPINOR_OP_RDSR, &sr1, 1);
sr_wr = ((uint16_t)sr2 << 8) | sr1;
stfsm_write_status(fsm, FLASH_CMD_WRSR, sr_wr, 2, 1);
stfsm_write_status(fsm, SPINOR_OP_WRSR, sr_wr, 2, 1);
}
return 0;