redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

ARM: Kirkwood: Add DT description of QNAP 419 

Re-implement the Marvell Kirkwood ts41x-setup.c in DT.

As with the QNAP 119, there are two variants, depending on which SoC
has been used. They differ on Ethernet PHY addresses and number of
PCIe busses.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Ian Campbell <ijc@hellion.org.uk> (kirkwood-ts419-6281.dtb)
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
hifive-unleashed-5.1
Andrew Lunn 2014-01-06 23:49:17 +01:00 committed by Jason Cooper
parent 27aa719962
commit 934b524b3f
4 changed files with 130 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
arch/arm/boot/dts/Makefile
View File

@ -116,7 +116,9 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-b3.dtb \
kirkwood-sheevaplug-esata.dtb \
kirkwood-topkick.dtb \
kirkwood-ts219-6281.dtb \
kirkwood-ts219-6282.dtb
kirkwood-ts219-6282.dtb \
kirkwood-ts419-6281.dtb \
kirkwood-ts419-6282.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \

20
arch/arm/boot/dts/kirkwood-ts419-6281.dts 100644
View File

@ -0,0 +1,20 @@
/*
* Device Tree file for QNAP TS41X with 6281 SoC
*
* Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
#include "kirkwood-ts219.dtsi"
#include "kirkwood-ts419.dtsi"
&ethphy0 { reg = <8>; };
&ethphy1 { reg = <0>; };

32
arch/arm/boot/dts/kirkwood-ts419-6282.dts 100644
View File

@ -0,0 +1,32 @@
/*
* Device Tree file for QNAP TS41X with 6282 SoC
*
* Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6282.dtsi"
#include "kirkwood-ts219.dtsi"
#include "kirkwood-ts419.dtsi"
/ {
mbus {
pcie-controller {
status = "okay";
pcie@2,0 {
status = "okay";
};
};
};
};
&ethphy0 { reg = <0>; };
&ethphy1 { reg = <1>; };

75
arch/arm/boot/dts/kirkwood-ts419.dtsi 100644
View File

@ -0,0 +1,75 @@
/*
* Device Tree include file for QNAP TS41X
*
* Copyright (C) 2013, Andrew Lunn <andrew@lunn.ch>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
/ {
model = "QNAP TS419 family";
compatible = "qnap,ts419", "marvell,kirkwood";
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pinctrl-names = "default";
pmx_USB_copy_button: pmx-USB-copy-button {
marvell,pins = "mpp43";
marvell,function = "gpio";
};
pmx_reset_button: pmx-reset-button {
marvell,pins = "mpp37";
marvell,function = "gpio";
};
/*
* JP1 indicates if an LCD module is installed
* on the serial port (0), or if the port is used
* as a console (1).
*/
pmx_jumper_jp1: pmx-jumper_jp1 {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
};
};
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>;
pinctrl-names = "default";
button@1 {
label = "USB Copy";
linux,code = <KEY_COPY>;
gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
};
button@2 {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
};
};
};
&mdio {
status = "okay";
ethphy1: ethernet-phy@1 {
device_type = "ethernet-phy";
/* overwrite reg property in board file */
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};