redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

ARM: dts: dra7: Use sdhci-omap programming model 

Use sdhci-omap programming model based on the generic sdhci
library for programming the eMMC/SD/SDIO controller.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
hifive-unleashed-5.1
Kishon Vijay Abraham I 2018-04-27 17:39:03 +05:30 committed by Tony Lindgren
parent 01c5d96688
commit 940293affa
7 changed files with 19 additions and 22 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
View File

@ -444,8 +444,8 @@
vmmc-supply = <&vdd_3v3>;
vqmmc-supply = <&vdd_3v3>;
bus-width = <8>;
ti,non-removable;
cap-mmc-dual-data-rate;
non-removable;
no-1-8-v;
};
&sata {

1
arch/arm/boot/dts/am57xx-beagle-x15.dts
View File

@ -25,6 +25,7 @@
pinctrl-1 = <&mmc1_pins_hs>;
vmmc-supply = <&ldo1_reg>;
no-1-8-v;
};
&mmc2 {

3
arch/arm/boot/dts/am57xx-idk-common.dtsi
View File

@ -412,8 +412,9 @@
vmmc-supply = <&v3_3d>;
vqmmc-supply = <&v3_3d>;
bus-width = <8>;
ti,non-removable;
non-removable;
max-frequency = <96000000>;
no-1-8-v;
};
&dcan1 {

1
arch/arm/boot/dts/dra7-evm.dts
View File

@ -377,6 +377,7 @@
vmmc-supply = <&evm_1v8_sw>;
vqmmc-supply = <&evm_1v8_sw>;
bus-width = <8>;
non-removable;
pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_hs>;

27
arch/arm/boot/dts/dra7.dtsi
View File

@ -1079,14 +1079,10 @@
};
mmc1: mmc@4809c000 {
compatible = "ti,omap4-hsmmc";
compatible = "ti,dra7-sdhci";
reg = <0x4809c000 0x400>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
dma-names = "tx", "rx";
status = "disabled";
pbias-supply = <&pbias_mmc_reg>;
max-frequency = <192000000>;
@ -1100,40 +1096,37 @@
};
mmc2: mmc@480b4000 {
compatible = "ti,omap4-hsmmc";
compatible = "ti,dra7-sdhci";
reg = <0x480b4000 0x400>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
dma-names = "tx", "rx";
status = "disabled";
max-frequency = <192000000>;
/* SDR104/DDR50/SDR50 bits in CAPA2 is not supported */
sdhci-caps-mask = <0x7 0x0>;
};
mmc3: mmc@480ad000 {
compatible = "ti,omap4-hsmmc";
compatible = "ti,dra7-sdhci";
reg = <0x480ad000 0x400>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc3";
ti,needs-special-reset;
dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
dma-names = "tx", "rx";
status = "disabled";
/* Errata i887 limits max-frequency of MMC3 to 64 MHz */
max-frequency = <64000000>;
/* SDMA is not supported */
sdhci-caps-mask = <0x0 0x400000>;
};
mmc4: mmc@480d1000 {
compatible = "ti,omap4-hsmmc";
compatible = "ti,dra7-sdhci";
reg = <0x480d1000 0x400>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc4";
ti,needs-special-reset;
dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
dma-names = "tx", "rx";
status = "disabled";
max-frequency = <192000000>;
/* SDMA is not supported */
sdhci-caps-mask = <0x0 0x400000>;
};
mmu0_dsp1: mmu@40d01000 {

2
arch/arm/boot/dts/dra72-evm-common.dtsi
View File

@ -413,7 +413,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_default>;
bus-width = <8>;
ti,non-removable;
non-removable;
max-frequency = <192000000>;
};

3
arch/arm/boot/dts/dra76-evm.dts
View File

@ -327,7 +327,7 @@
&mmc1 {
status = "okay";
vmmc-supply = <&vio_3v3_sd>;
vmmc_aux-supply = <&ldo4_reg>;
vqmmc-supply = <&ldo4_reg>;
bus-width = <4>;
/*
* SDCD signal is not being used here - using the fact that GPIO mode
@ -344,6 +344,7 @@
vmmc-supply = <&vio_1v8>;
vqmmc-supply = <&vio_1v8>;
bus-width = <8>;
non-removable;
pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
pinctrl-0 = <&mmc2_pins_default>;
pinctrl-1 = <&mmc2_pins_default>;