Merge 5.0-rc6 into driver-core-next

We need the debugfs fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-11 09:09:02 +01:00 · 2019-02-11 09:09:02 +01:00 · 9481caf39b
parent 344c0152d8 d13937116f
commit 9481caf39b
1224 changed files with 13318 additions and 6048 deletions
--- a/.clang-format
+++ b/.clang-format
@ -72,6 +72,10 @@ ForEachMacros:
  - 'apei_estatus_for_each_section'
  - 'ata_for_each_dev'
  - 'ata_for_each_link'
+  - '__ata_qc_for_each'
+  - 'ata_qc_for_each'
+  - 'ata_qc_for_each_raw'
+  - 'ata_qc_for_each_with_internal'
  - 'ax25_for_each'
  - 'ax25_uid_for_each'
  - 'bio_for_each_integrity_vec'
@ -85,6 +89,7 @@ ForEachMacros:
  - 'blk_queue_for_each_rl'
  - 'bond_for_each_slave'
  - 'bond_for_each_slave_rcu'
+  - 'bpf_for_each_spilled_reg'
  - 'btree_for_each_safe128'
  - 'btree_for_each_safe32'
  - 'btree_for_each_safe64'
@ -103,6 +108,8 @@ ForEachMacros:
  - 'drm_atomic_crtc_for_each_plane'
  - 'drm_atomic_crtc_state_for_each_plane'
  - 'drm_atomic_crtc_state_for_each_plane_state'
+  - 'drm_atomic_for_each_plane_damage'
+  - 'drm_connector_for_each_possible_encoder'
  - 'drm_for_each_connector_iter'
  - 'drm_for_each_crtc'
  - 'drm_for_each_encoder'
@ -121,11 +128,21 @@ ForEachMacros:
  - 'for_each_bio'
  - 'for_each_board_func_rsrc'
  - 'for_each_bvec'
+  - 'for_each_card_components'
+  - 'for_each_card_links'
+  - 'for_each_card_links_safe'
+  - 'for_each_card_prelinks'
+  - 'for_each_card_rtds'
+  - 'for_each_card_rtds_safe'
+  - 'for_each_cgroup_storage_type'
  - 'for_each_child_of_node'
  - 'for_each_clear_bit'
  - 'for_each_clear_bit_from'
  - 'for_each_cmsghdr'
  - 'for_each_compatible_node'
+  - 'for_each_component_dais'
+  - 'for_each_component_dais_safe'
+  - 'for_each_comp_order'
  - 'for_each_console'
  - 'for_each_cpu'
  - 'for_each_cpu_and'
@ -133,6 +150,10 @@ ForEachMacros:
  - 'for_each_cpu_wrap'
  - 'for_each_dev_addr'
  - 'for_each_dma_cap_mask'
+  - 'for_each_dpcm_be'
+  - 'for_each_dpcm_be_rollback'
+  - 'for_each_dpcm_be_safe'
+  - 'for_each_dpcm_fe'
  - 'for_each_drhd_unit'
  - 'for_each_dss_dev'
  - 'for_each_efi_memory_desc'
@ -149,6 +170,7 @@ ForEachMacros:
  - 'for_each_iommu'
  - 'for_each_ip_tunnel_rcu'
  - 'for_each_irq_nr'
+  - 'for_each_link_codecs'
  - 'for_each_lru'
  - 'for_each_matching_node'
  - 'for_each_matching_node_and_match'
@ -160,6 +182,7 @@ ForEachMacros:
  - 'for_each_mem_range_rev'
  - 'for_each_migratetype_order'
  - 'for_each_msi_entry'
+  - 'for_each_msi_entry_safe'
  - 'for_each_net'
  - 'for_each_netdev'
  - 'for_each_netdev_continue'
@ -183,12 +206,14 @@ ForEachMacros:
  - 'for_each_node_with_property'
  - 'for_each_of_allnodes'
  - 'for_each_of_allnodes_from'
+  - 'for_each_of_cpu_node'
  - 'for_each_of_pci_range'
  - 'for_each_old_connector_in_state'
  - 'for_each_old_crtc_in_state'
  - 'for_each_oldnew_connector_in_state'
  - 'for_each_oldnew_crtc_in_state'
  - 'for_each_oldnew_plane_in_state'
+  - 'for_each_oldnew_plane_in_state_reverse'
  - 'for_each_oldnew_private_obj_in_state'
  - 'for_each_old_plane_in_state'
  - 'for_each_old_private_obj_in_state'
@ -206,14 +231,17 @@ ForEachMacros:
  - 'for_each_process'
  - 'for_each_process_thread'
  - 'for_each_property_of_node'
+  - 'for_each_registered_fb'
  - 'for_each_reserved_mem_region'
-  - 'for_each_resv_unavail_range'
+  - 'for_each_rtd_codec_dai'
+  - 'for_each_rtd_codec_dai_rollback'
  - 'for_each_rtdcom'
  - 'for_each_rtdcom_safe'
  - 'for_each_set_bit'
  - 'for_each_set_bit_from'
  - 'for_each_sg'
  - 'for_each_sg_page'
+  - 'for_each_sibling_event'
  - '__for_each_thread'
  - 'for_each_thread'
  - 'for_each_zone'
@ -251,6 +279,8 @@ ForEachMacros:
  - 'hlist_nulls_for_each_entry_from'
  - 'hlist_nulls_for_each_entry_rcu'
  - 'hlist_nulls_for_each_entry_safe'
+  - 'i3c_bus_for_each_i2cdev'
+  - 'i3c_bus_for_each_i3cdev'
  - 'ide_host_for_each_port'
  - 'ide_port_for_each_dev'
  - 'ide_port_for_each_present_dev'
@ -267,11 +297,14 @@ ForEachMacros:
  - 'kvm_for_each_memslot'
  - 'kvm_for_each_vcpu'
  - 'list_for_each'
+  - 'list_for_each_codec'
+  - 'list_for_each_codec_safe'
  - 'list_for_each_entry'
  - 'list_for_each_entry_continue'
  - 'list_for_each_entry_continue_rcu'
  - 'list_for_each_entry_continue_reverse'
  - 'list_for_each_entry_from'
+  - 'list_for_each_entry_from_rcu'
  - 'list_for_each_entry_from_reverse'
  - 'list_for_each_entry_lockless'
  - 'list_for_each_entry_rcu'
@ -291,6 +324,7 @@ ForEachMacros:
  - 'media_device_for_each_intf'
  - 'media_device_for_each_link'
  - 'media_device_for_each_pad'
+  - 'nanddev_io_for_each_page'
  - 'netdev_for_each_lower_dev'
  - 'netdev_for_each_lower_private'
  - 'netdev_for_each_lower_private_rcu'
@ -357,12 +391,14 @@ ForEachMacros:
  - 'sk_nulls_for_each'
  - 'sk_nulls_for_each_from'
  - 'sk_nulls_for_each_rcu'
+  - 'snd_array_for_each'
  - 'snd_pcm_group_for_each_entry'
  - 'snd_soc_dapm_widget_for_each_path'
  - 'snd_soc_dapm_widget_for_each_path_safe'
  - 'snd_soc_dapm_widget_for_each_sink_path'
  - 'snd_soc_dapm_widget_for_each_source_path'
  - 'tb_property_for_each'
+  - 'tcf_exts_for_each_action'
  - 'udp_portaddr_for_each_entry'
  - 'udp_portaddr_for_each_entry_rcu'
  - 'usb_hub_for_each_child'
@ -371,6 +407,11 @@ ForEachMacros:
  - 'v4l2_m2m_for_each_dst_buf_safe'
  - 'v4l2_m2m_for_each_src_buf'
  - 'v4l2_m2m_for_each_src_buf_safe'
+  - 'virtio_device_for_each_vq'
+  - 'xa_for_each'
+  - 'xas_for_each'
+  - 'xas_for_each_conflict'
+  - 'xas_for_each_marked'
  - 'zorro_for_each_dev'

 #IncludeBlocks: Preserve # Unknown to clang-format-5.0
--- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io
+++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@ -24,7 +24,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
 							cpld3_version

 Date:		November 2018
-KernelVersion:	4.21
+KernelVersion:	5.0
 Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show with which CPLD versions have been burned
 		on LED board.
@ -35,7 +35,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
 							jtag_enable

 Date:		November 2018
-KernelVersion:	4.21
+KernelVersion:	5.0
 Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files enable and disable the access to the JTAG domain.
 		By default access to the JTAG domain is disabled.
@ -105,7 +105,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
 						reset_voltmon_upgrade_fail

 Date:		November 2018
-KernelVersion:	4.21
+KernelVersion:	5.0
 Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show the system reset cause, as following: ComEx
 		power fail, reset from ComEx, system platform reset, reset
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@ -1696,12 +1696,11 @@
 			By default, super page will be supported if Intel IOMMU
 			has the capability. With this option, super page will
 			not be supported.
-		sm_off [Default Off]
-			By default, scalable mode will be supported if the
+		sm_on [Default Off]
+			By default, scalable mode will be disabled even if the
 			hardware advertises that it has support for the scalable
 			mode translation. With this option set, scalable mode
-			will not be used even on hardware which claims to support
-			it.
+			will be used on hardware which claims to support it.
 		tboot_noforce [Default Off]
 			Do not force the Intel IOMMU enabled under tboot.
 			By default, tboot will force Intel IOMMU on, which
--- a/Documentation/bpf/bpf_design_QA.rst
+++ b/Documentation/bpf/bpf_design_QA.rst
@ -157,12 +157,11 @@ Q: Does BPF have a stable ABI?
 ------------------------------
 A: YES. BPF instructions, arguments to BPF programs, set of helper
 functions and their arguments, recognized return codes are all part
-of ABI. However when tracing programs are using bpf_probe_read() helper
-to walk kernel internal datastructures and compile with kernel
-internal headers these accesses can and will break with newer
-kernels. The union bpf_attr -> kern_version is checked at load time
-to prevent accidentally loading kprobe-based bpf programs written
-for a different kernel. Networking programs don't do kern_version check.
+of ABI. However there is one specific exception to tracing programs
+which are using helpers like bpf_probe_read() to walk kernel internal
+data structures and compile with kernel internal headers. Both of these
+kernel internals are subject to change and can break with newer kernels
+such that the program needs to be adapted accordingly.

 Q: How much stack space a BPF program uses?
 -------------------------------------------
--- a/Documentation/core-api/xarray.rst
+++ b/Documentation/core-api/xarray.rst
@ -108,12 +108,13 @@ some, but not all of the other indices changing.

 Sometimes you need to ensure that a subsequent call to :c:func:`xa_store`
 will not need to allocate memory.  The :c:func:`xa_reserve` function
-will store a reserved entry at the indicated index.  Users of the normal
-API will see this entry as containing ``NULL``.  If you do not need to
-use the reserved entry, you can call :c:func:`xa_release` to remove the
-unused entry.  If another user has stored to the entry in the meantime,
-:c:func:`xa_release` will do nothing; if instead you want the entry to
-become ``NULL``, you should use :c:func:`xa_erase`.
+will store a reserved entry at the indicated index.  Users of the
+normal API will see this entry as containing ``NULL``.  If you do
+not need to use the reserved entry, you can call :c:func:`xa_release`
+to remove the unused entry.  If another user has stored to the entry
+in the meantime, :c:func:`xa_release` will do nothing; if instead you
+want the entry to become ``NULL``, you should use :c:func:`xa_erase`.
+Using :c:func:`xa_insert` on a reserved entry will fail.

 If all entries in the array are ``NULL``, the :c:func:`xa_empty` function
 will return ``true``.
@ -183,6 +184,8 @@ Takes xa_lock internally:
 * :c:func:`xa_store_bh`
 * :c:func:`xa_store_irq`
 * :c:func:`xa_insert`
+ * :c:func:`xa_insert_bh`
+ * :c:func:`xa_insert_irq`
 * :c:func:`xa_erase`
 * :c:func:`xa_erase_bh`
 * :c:func:`xa_erase_irq`
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@ -17,7 +17,11 @@ extra-y += $(DT_TMP_SCHEMA)
 quiet_cmd_mk_schema = SCHEMA  $@
      cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(filter-out FORCE, $^)

-DT_DOCS = $(shell cd $(srctree)/$(src) && find * -name '*.yaml')
+DT_DOCS = $(shell \
+	cd $(srctree)/$(src) && \
+	find * \( -name '*.yaml' ! -name $(DT_TMP_SCHEMA) \) \
+	)
+
 DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS))

 extra-y += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
--- a/Documentation/devicetree/bindings/arm/cpu-capacity.txt
+++ b/Documentation/devicetree/bindings/arm/cpu-capacity.txt
@ -235,4 +235,4 @@ cpus {
 ===========================================

 [1] ARM Linux Kernel documentation - CPUs bindings
-    Documentation/devicetree/bindings/arm/cpus.txt
+    Documentation/devicetree/bindings/arm/cpus.yaml
--- a/Documentation/devicetree/bindings/arm/idle-states.txt
+++ b/Documentation/devicetree/bindings/arm/idle-states.txt
@ -684,7 +684,7 @@ cpus {
 ===========================================

 [1] ARM Linux Kernel documentation - CPUs bindings
-    Documentation/devicetree/bindings/arm/cpus.txt
+    Documentation/devicetree/bindings/arm/cpus.yaml

 [2] ARM Linux Kernel documentation - PSCI bindings
    Documentation/devicetree/bindings/arm/psci.txt
--- a/Documentation/devicetree/bindings/arm/sp810.txt
+++ b/Documentation/devicetree/bindings/arm/sp810.txt
@ -4,7 +4,7 @@ SP810 System Controller
 Required properties:

 - compatible:	standard compatible string for a Primecell peripheral,
-		see Documentation/devicetree/bindings/arm/primecell.txt
+		see Documentation/devicetree/bindings/arm/primecell.yaml
 		for more details
 		should be: "arm,sp810", "arm,primecell"

--- a/Documentation/devicetree/bindings/arm/topology.txt
+++ b/Documentation/devicetree/bindings/arm/topology.txt
@ -472,4 +472,4 @@ cpus {

 ===============================================================================
 [1] ARM Linux kernel documentation
-    Documentation/devicetree/bindings/arm/cpus.txt
+    Documentation/devicetree/bindings/arm/cpus.yaml
--- a/Documentation/devicetree/bindings/clock/marvell,mmp2.txt
+++ b/Documentation/devicetree/bindings/clock/marvell,mmp2.txt
@ -18,4 +18,4 @@ Required Properties:
 Each clock is assigned an identifier and client nodes use this identifier
 to specify the clock which they consume.

-All these identifier could be found in <dt-bindings/clock/marvell-mmp2.h>.
+All these identifiers could be found in <dt-bindings/clock/marvell,mmp2.h>.
--- a/Documentation/devicetree/bindings/display/arm,pl11x.txt
+++ b/Documentation/devicetree/bindings/display/arm,pl11x.txt
@ -1,6 +1,6 @@
 * ARM PrimeCell Color LCD Controller PL110/PL111

-See also Documentation/devicetree/bindings/arm/primecell.txt
+See also Documentation/devicetree/bindings/arm/primecell.yaml

 Required properties:

--- a/Documentation/devicetree/bindings/display/msm/gpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
@ -27,7 +27,6 @@ Example:
 		reg = <0x04300000 0x20000>;
 		reg-names = "kgsl_3d0_reg_memory";
 		interrupts = <GIC_SPI 80 0>;
-		interrupt-names = "kgsl_3d0_irq";
 		clock-names =
 		    "core",
 		    "iface",
--- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt
@ -14,8 +14,6 @@ Required properties:

    "marvell,armada-8k-gpio" should be used for the Armada 7K and 8K
    SoCs (either from AP or CP), see
-    Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt
-    and
    Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
    for specific details about the offset property.

--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
@ -78,7 +78,7 @@ Sub-nodes:
 PPI affinity can be expressed as a single "ppi-partitions" node,
 containing a set of sub-nodes, each with the following property:
 - affinity: Should be a list of phandles to CPU nodes (as described in
-Documentation/devicetree/bindings/arm/cpus.txt).
+  Documentation/devicetree/bindings/arm/cpus.yaml).

 GICv3 has one or more Interrupt Translation Services (ITS) that are
 used to route Message Signalled Interrupts (MSI) to the CPUs.
--- a/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt
+++ b/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt
@ -4,14 +4,10 @@ Required properties:
 - compatible : "olpc,ap-sp"
 - reg : base address and length of SoC's WTM registers
 - interrupts : SP-AP interrupt
- clocks : phandle + clock-specifier for the clock that drives the WTM
- clock-names:  should be "sp"

 Example:
 	ap-sp@d4290000 {
 		compatible = "olpc,ap-sp";
 		reg = <0xd4290000 0x1000>;
 		interrupts = <40>;
-		clocks = <&soc_clocks MMP2_CLK_SP>;
-		clock-names = "sp";
 	}
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
@ -55,7 +55,7 @@ of these nodes are defined by the individual bindings for the specific function
 = EXAMPLE
 The following example represents the GLINK RPM node on a MSM8996 device, with
 the function for the "rpm_request" channel defined, which is used for
-regualtors and root clocks.
+regulators and root clocks.

 	apcs_glb: mailbox@9820000 {
 		compatible = "qcom,msm8996-apcs-hmss-global";
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smp2p.txt
@ -41,12 +41,12 @@ processor ID) and a string identifier.
 - qcom,local-pid:
 	Usage: required
 	Value type: <u32>
-	Definition: specifies the identfier of the local endpoint of this edge
+	Definition: specifies the identifier of the local endpoint of this edge

 - qcom,remote-pid:
 	Usage: required
 	Value type: <u32>
-	Definition: specifies the identfier of the remote endpoint of this edge
+	Definition: specifies the identifier of the remote endpoint of this edge

 = SUBNODES
 Each SMP2P pair contain a set of inbound and outbound entries, these are
--- a/Documentation/fb/fbcon.txt
+++ b/Documentation/fb/fbcon.txt
@ -163,6 +163,14 @@ C. Boot options
 	be preserved until there actually is some text is output to the console.
 	This option causes fbcon to bind immediately to the fbdev device.

+7. fbcon=logo-pos:<location>
+
+	The only possible 'location' is 'center' (without quotes), and when
+	given, the bootup logo is moved from the default top-left corner
+	location to the center of the framebuffer. If more than one logo is
+	displayed due to multiple CPUs, the collected line of logos is moved
+	as a whole.
+
 C. Attaching, Detaching and Unloading

 Before going on to how to attach, detach and unload the framebuffer console, an
--- a/Documentation/networking/index.rst
+++ b/Documentation/networking/index.rst
@ -11,19 +11,19 @@ Contents:
   batman-adv
   can
   can_ucan_protocol
-   dpaa2/index
-   e100
-   e1000
-   e1000e
-   fm10k
-   igb
-   igbvf
-   ixgb
-   ixgbe
-   ixgbevf
-   i40e
-   iavf
-   ice
+   device_drivers/freescale/dpaa2/index
+   device_drivers/intel/e100
+   device_drivers/intel/e1000
+   device_drivers/intel/e1000e
+   device_drivers/intel/fm10k
+   device_drivers/intel/igb
+   device_drivers/intel/igbvf
+   device_drivers/intel/ixgb
+   device_drivers/intel/ixgbe
+   device_drivers/intel/ixgbevf
+   device_drivers/intel/i40e
+   device_drivers/intel/iavf
+   device_drivers/intel/ice
   kapi
   z8530book
   msg_zerocopy
--- a/Documentation/networking/rxrpc.txt
+++ b/Documentation/networking/rxrpc.txt
@ -1000,51 +1000,6 @@ The kernel interface functions are as follows:
     size should be set when the call is begun.  tx_total_len may not be less
     than zero.

- (*) Check to see the completion state of a call so that the caller can assess
-     whether it needs to be retried.
-
-	enum rxrpc_call_completion {
-		RXRPC_CALL_SUCCEEDED,
-		RXRPC_CALL_REMOTELY_ABORTED,
-		RXRPC_CALL_LOCALLY_ABORTED,
-		RXRPC_CALL_LOCAL_ERROR,
-		RXRPC_CALL_NETWORK_ERROR,
-	};
-
-	int rxrpc_kernel_check_call(struct socket *sock, struct rxrpc_call *call,
-				    enum rxrpc_call_completion *_compl,
-				    u32 *_abort_code);
-
-     On return, -EINPROGRESS will be returned if the call is still ongoing; if
-     it is finished, *_compl will be set to indicate the manner of completion,
-     *_abort_code will be set to any abort code that occurred.  0 will be
-     returned on a successful completion, -ECONNABORTED will be returned if the
-     client failed due to a remote abort and anything else will return an
-     appropriate error code.
-
-     The caller should look at this information to decide if it's worth
-     retrying the call.
-
- (*) Retry a client call.
-
-	int rxrpc_kernel_retry_call(struct socket *sock,
-				    struct rxrpc_call *call,
-				    struct sockaddr_rxrpc *srx,
-				    struct key *key);
-
-     This attempts to partially reinitialise a call and submit it again while
-     reusing the original call's Tx queue to avoid the need to repackage and
-     re-encrypt the data to be sent.  call indicates the call to retry, srx the
-     new address to send it to and key the encryption key to use for signing or
-     encrypting the packets.
-
-     For this to work, the first Tx data packet must still be in the transmit
-     queue, and currently this is only permitted for local and network errors
-     and the call must not have been aborted.  Any partially constructed Tx
-     packet is left as is and can continue being filled afterwards.
-
-     It returns 0 if the call was requeued and an error otherwise.
-
 (*) Get call RTT.

 	u64 rxrpc_kernel_get_rtt(struct socket *sock, struct rxrpc_call *call);
--- a/Documentation/networking/snmp_counter.rst
+++ b/Documentation/networking/snmp_counter.rst
@ -336,7 +336,26 @@ time client replies ACK, this socket will get another chance to move
 to the accept queue.


-TCP Fast Open
+* TcpEstabResets
+Defined in `RFC1213 tcpEstabResets`_.
+
+.. _RFC1213 tcpEstabResets: https://tools.ietf.org/html/rfc1213#page-48
+
+* TcpAttemptFails
+Defined in `RFC1213 tcpAttemptFails`_.
+
+.. _RFC1213 tcpAttemptFails: https://tools.ietf.org/html/rfc1213#page-48
+
+* TcpOutRsts
+Defined in `RFC1213 tcpOutRsts`_. The RFC says this counter indicates
+the 'segments sent containing the RST flag', but in linux kernel, this
+couner indicates the segments kerenl tried to send. The sending
+process might be failed due to some errors (e.g. memory alloc failed).
+
+.. _RFC1213 tcpOutRsts: https://tools.ietf.org/html/rfc1213#page-52
+
+
+TCP Fast Path
 ============
 When kernel receives a TCP packet, it has two paths to handler the
 packet, one is fast path, another is slow path. The comment in kernel
@ -383,8 +402,6 @@ increase 1.

 TCP abort
 ========
-
-
 * TcpExtTCPAbortOnData
 It means TCP layer has data in flight, but need to close the
 connection. So TCP layer sends a RST to the other side, indicate the
@ -545,7 +562,6 @@ packet yet, the sender would know packet 4 is out of order. The TCP
 stack of kernel will increase TcpExtTCPSACKReorder for both of the
 above scenarios.

-
 DSACK
 =====
 The DSACK is defined in `RFC2883`_. The receiver uses DSACK to report
@ -566,13 +582,63 @@ The TCP stack receives an out of order duplicate packet, so it sends a
 DSACK to the sender.

 * TcpExtTCPDSACKRecv
-The TCP stack receives a DSACK, which indicate an acknowledged
+The TCP stack receives a DSACK, which indicates an acknowledged
 duplicate packet is received.

 * TcpExtTCPDSACKOfoRecv
 The TCP stack receives a DSACK, which indicate an out of order
 duplicate packet is received.

+invalid SACK and DSACK
+====================
+When a SACK (or DSACK) block is invalid, a corresponding counter would
+be updated. The validation method is base on the start/end sequence
+number of the SACK block. For more details, please refer the comment
+of the function tcp_is_sackblock_valid in the kernel source code. A
+SACK option could have up to 4 blocks, they are checked
+individually. E.g., if 3 blocks of a SACk is invalid, the
+corresponding counter would be updated 3 times. The comment of the
+`Add counters for discarded SACK blocks`_ patch has additional
+explaination:
+
+.. _Add counters for discarded SACK blocks: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=18f02545a9a16c9a89778b91a162ad16d510bb32
+
+* TcpExtTCPSACKDiscard
+This counter indicates how many SACK blocks are invalid. If the invalid
+SACK block is caused by ACK recording, the TCP stack will only ignore
+it and won't update this counter.
+
+* TcpExtTCPDSACKIgnoredOld and TcpExtTCPDSACKIgnoredNoUndo
+When a DSACK block is invalid, one of these two counters would be
+updated. Which counter will be updated depends on the undo_marker flag
+of the TCP socket. If the undo_marker is not set, the TCP stack isn't
+likely to re-transmit any packets, and we still receive an invalid
+DSACK block, the reason might be that the packet is duplicated in the
+middle of the network. In such scenario, TcpExtTCPDSACKIgnoredNoUndo
+will be updated. If the undo_marker is set, TcpExtTCPDSACKIgnoredOld
+will be updated. As implied in its name, it might be an old packet.
+
+SACK shift
+=========
+The linux networking stack stores data in sk_buff struct (skb for
+short). If a SACK block acrosses multiple skb, the TCP stack will try
+to re-arrange data in these skb. E.g. if a SACK block acknowledges seq
+10 to 15, skb1 has seq 10 to 13, skb2 has seq 14 to 20. The seq 14 and
+15 in skb2 would be moved to skb1. This operation is 'shift'. If a
+SACK block acknowledges seq 10 to 20, skb1 has seq 10 to 13, skb2 has
+seq 14 to 20. All data in skb2 will be moved to skb1, and skb2 will be
+discard, this operation is 'merge'.
+
+* TcpExtTCPSackShifted
+A skb is shifted
+
+* TcpExtTCPSackMerged
+A skb is merged
+
+* TcpExtTCPSackShiftFallback
+A skb should be shifted or merged, but the TCP stack doesn't do it for
+some reasons.
+
 TCP out of order
 ===============
 * TcpExtTCPOFOQueue
@ -662,6 +728,60 @@ unacknowledged number (more strict than `RFC 5961 section 5.2`_).
 .. _RFC 5961 section 4.2: https://tools.ietf.org/html/rfc5961#page-9
 .. _RFC 5961 section 5.2: https://tools.ietf.org/html/rfc5961#page-11

+TCP receive window
+=================
+* TcpExtTCPWantZeroWindowAdv
+Depending on current memory usage, the TCP stack tries to set receive
+window to zero. But the receive window might still be a no-zero
+value. For example, if the previous window size is 10, and the TCP
+stack receives 3 bytes, the current window size would be 7 even if the
+window size calculated by the memory usage is zero.
+
+* TcpExtTCPToZeroWindowAdv
+The TCP receive window is set to zero from a no-zero value.
+
+* TcpExtTCPFromZeroWindowAdv
+The TCP receive window is set to no-zero value from zero.
+
+
+Delayed ACK
+==========
+The TCP Delayed ACK is a technique which is used for reducing the
+packet count in the network. For more details, please refer the
+`Delayed ACK wiki`_
+
+.. _Delayed ACK wiki: https://en.wikipedia.org/wiki/TCP_delayed_acknowledgment
+
+* TcpExtDelayedACKs
+A delayed ACK timer expires. The TCP stack will send a pure ACK packet
+and exit the delayed ACK mode.
+
+* TcpExtDelayedACKLocked
+A delayed ACK timer expires, but the TCP stack can't send an ACK
+immediately due to the socket is locked by a userspace program. The
+TCP stack will send a pure ACK later (after the userspace program
+unlock the socket). When the TCP stack sends the pure ACK later, the
+TCP stack will also update TcpExtDelayedACKs and exit the delayed ACK
+mode.
+
+* TcpExtDelayedACKLost
+It will be updated when the TCP stack receives a packet which has been
+ACKed. A Delayed ACK loss might cause this issue, but it would also be
+triggered by other reasons, such as a packet is duplicated in the
+network.
+
+Tail Loss Probe (TLP)
+===================
+TLP is an algorithm which is used to detect TCP packet loss. For more
+details, please refer the `TLP paper`_.
+
+.. _TLP paper: https://tools.ietf.org/html/draft-dukkipati-tcpm-tcp-loss-probe-01
+
+* TcpExtTCPLossProbes
+A TLP probe packet is sent.
+
+* TcpExtTCPLossProbeRecovery
+A packet loss is detected and recovered by TLP.

 examples
 =======
--- a/Documentation/networking/timestamping.txt
+++ b/Documentation/networking/timestamping.txt
@ -417,7 +417,7 @@ is again deprecated and ts[2] holds a hardware timestamp if set.

 Hardware time stamping must also be initialized for each device driver
 that is expected to do hardware time stamping. The parameter is defined in
-/include/linux/net_tstamp.h as:
+include/uapi/linux/net_tstamp.h as:

 struct hwtstamp_config {
 	int flags;	/* no flags defined right now, must be zero */
@ -487,7 +487,7 @@ enum {
 	HWTSTAMP_FILTER_PTP_V1_L4_EVENT,

 	/* for the complete list of values, please check
-	 * the include file /include/linux/net_tstamp.h
+	 * the include file include/uapi/linux/net_tstamp.h
 	 */
 };

--- a/Documentation/sysctl/fs.txt
+++ b/Documentation/sysctl/fs.txt
@ -56,26 +56,32 @@ of any kernel data structures.

 dentry-state:

-From linux/fs/dentry.c:
+From linux/include/linux/dcache.h:
 --------------------------------------------------------------
-struct {
+struct dentry_stat_t dentry_stat {
        int nr_dentry;
        int nr_unused;
        int age_limit;         /* age in seconds */
        int want_pages;        /* pages requested by system */
-        int dummy[2];
-} dentry_stat = {0, 0, 45, 0,};
-------------------------------------------------------------- 
+        int nr_negative;       /* # of unused negative dentries */
+        int dummy;             /* Reserved for future use */
+};
+--------------------------------------------------------------
+
+Dentries are dynamically allocated and deallocated.
+
+nr_dentry shows the total number of dentries allocated (active
+ unused). nr_unused shows the number of dentries that are not
+actively used, but are saved in the LRU list for future reuse.

-Dentries are dynamically allocated and deallocated, and
-nr_dentry seems to be 0 all the time. Hence it's safe to
-assume that only nr_unused, age_limit and want_pages are
-used. Nr_unused seems to be exactly what its name says.
 Age_limit is the age in seconds after which dcache entries
 can be reclaimed when memory is short and want_pages is
 nonzero when shrink_dcache_pages() has been called and the
 dcache isn't pruned yet.

+nr_negative shows the number of unused dentries that are also
+negative dentries which do not mapped to actual files.
+
 ==============================================================

 dquot-max & dquot-nr:
--- a/Documentation/x86/resctrl_ui.txt
+++ b/Documentation/x86/resctrl_ui.txt
@ -9,7 +9,7 @@ Fenghua Yu <fenghua.yu@intel.com>
 Tony Luck <tony.luck@intel.com>
 Vikas Shivappa <vikas.shivappa@intel.com>

-This feature is enabled by the CONFIG_X86_RESCTRL and the x86 /proc/cpuinfo
+This feature is enabled by the CONFIG_X86_CPU_RESCTRL and the x86 /proc/cpuinfo
 flag bits:
 RDT (Resource Director Technology) Allocation - "rdt_a"
 CAT (Cache Allocation Technology) - "cat_l3", "cat_l2"
--- a/104
+++ b/104
@ -2848,6 +2848,9 @@ F:	include/uapi/linux/if_bonding.h
 BPF (Safe dynamic programs and tools)
 M:	Alexei Starovoitov <ast@kernel.org>
 M:	Daniel Borkmann <daniel@iogearbox.net>
+R:	Martin KaFai Lau <kafai@fb.com>
+R:	Song Liu <songliubraving@fb.com>
+R:	Yonghong Song <yhs@fb.com>
 L:	netdev@vger.kernel.org
 L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
@ -2873,6 +2876,8 @@ F:	samples/bpf/
 F:	tools/bpf/
 F:	tools/lib/bpf/
 F:	tools/testing/selftests/bpf/
+K:	bpf
+N:	bpf

 BPF JIT for ARM
 M:	Shubham Bansal <illusionist.neo@gmail.com>
@ -3052,8 +3057,8 @@ F:	include/linux/bcm963xx_nvram.h
 F:	include/linux/bcm963xx_tag.h

 BROADCOM BNX2 GIGABIT ETHERNET DRIVER
-M:	Rasesh Mody <rasesh.mody@cavium.com>
-M:	Dept-GELinuxNICDev@cavium.com
+M:	Rasesh Mody <rmody@marvell.com>
+M:	GR-Linux-NIC-Dev@marvell.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2.*
@ -3072,9 +3077,9 @@ S:	Supported
 F:	drivers/scsi/bnx2i/

 BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
-M:	Ariel Elior <ariel.elior@cavium.com>
-M:	Sudarsana Kalluru <sudarsana.kalluru@cavium.com>
-M:	everest-linux-l2@cavium.com
+M:	Ariel Elior <aelior@marvell.com>
+M:	Sudarsana Kalluru <skalluru@marvell.com>
+M:	GR-everest-linux-l2@marvell.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/broadcom/bnx2x/
@ -3249,9 +3254,9 @@ S:	Supported
 F:	drivers/scsi/bfa/

 BROCADE BNA 10 GIGABIT ETHERNET DRIVER
-M:	Rasesh Mody <rasesh.mody@cavium.com>
-M:	Sudarsana Kalluru <sudarsana.kalluru@cavium.com>
-M:	Dept-GELinuxNICDev@cavium.com
+M:	Rasesh Mody <rmody@marvell.com>
+M:	Sudarsana Kalluru <skalluru@marvell.com>
+M:	GR-Linux-NIC-Dev@marvell.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/brocade/bna/
@ -3471,10 +3476,9 @@ F:	drivers/i2c/busses/i2c-octeon*
 F:	drivers/i2c/busses/i2c-thunderx*

 CAVIUM LIQUIDIO NETWORK DRIVER
-M:	Derek Chickles <derek.chickles@caviumnetworks.com>
-M:	Satanand Burla <satananda.burla@caviumnetworks.com>
-M:	Felix Manlunas <felix.manlunas@caviumnetworks.com>
-M:	Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
+M:	Derek Chickles <dchickles@marvell.com>
+M:	Satanand Burla <sburla@marvell.com>
+M:	Felix Manlunas <fmanlunas@marvell.com>
 L:	netdev@vger.kernel.org
 W:	http://www.cavium.com
 S:	Supported
@ -3979,6 +3983,7 @@ F:	drivers/cpufreq/arm_big_little.c
 CPU POWER MONITORING SUBSYSTEM
 M:	Thomas Renninger <trenn@suse.com>
 M:	Shuah Khan <shuah@kernel.org>
+M:	Shuah Khan <skhan@linuxfoundation.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
 F:	tools/power/cpupower/
@ -5181,7 +5186,7 @@ DRM DRIVERS FOR XEN
 M:	Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
 T:	git git://anongit.freedesktop.org/drm/drm-misc
 L:	dri-devel@lists.freedesktop.org
-L:	xen-devel@lists.xen.org
+L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/gpu/drm/xen/
 F:	Documentation/gpu/xen-front.rst
@ -8259,6 +8264,7 @@ F:	include/uapi/linux/sunrpc/

 KERNEL SELFTEST FRAMEWORK
 M:	Shuah Khan <shuah@kernel.org>
+M:	Shuah Khan <skhan@linuxfoundation.org>
 L:	linux-kselftest@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git
 Q:	https://patchwork.kernel.org/project/linux-kselftest/list/
@ -10689,9 +10695,9 @@ S:	Maintained
 F:	drivers/net/netdevsim/*

 NETXEN (1/10) GbE SUPPORT
-M:	Manish Chopra <manish.chopra@cavium.com>
-M:	Rahul Verma <rahul.verma@cavium.com>
-M:	Dept-GELinuxNICDev@cavium.com
+M:	Manish Chopra <manishc@marvell.com>
+M:	Rahul Verma <rahulv@marvell.com>
+M:	GR-Linux-NIC-Dev@marvell.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/qlogic/netxen/
@ -11306,10 +11312,12 @@ F:	include/dt-bindings/

 OPENCORES I2C BUS DRIVER
 M:	Peter Korsgaard <peter@korsgaard.com>
+M:	Andrew Lunn <andrew@lunn.ch>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-ocores
 F:	drivers/i2c/busses/i2c-ocores.c
+F:	include/linux/platform_data/i2c-ocores.h

 OPENRISC ARCHITECTURE
 M:	Jonas Bonn <jonas@southpole.se>
@ -12475,8 +12483,8 @@ S:	Supported
 F:	drivers/scsi/qedi/

 QLOGIC QL4xxx ETHERNET DRIVER
-M:	Ariel Elior <Ariel.Elior@cavium.com>
-M:	everest-linux-l2@cavium.com
+M:	Ariel Elior <aelior@marvell.com>
+M:	GR-everest-linux-l2@marvell.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qed/
@ -12484,8 +12492,8 @@ F:	include/linux/qed/
 F:	drivers/net/ethernet/qlogic/qede/

 QLOGIC QL4xxx RDMA DRIVER
-M:	Michal Kalderon <Michal.Kalderon@cavium.com>
-M:	Ariel Elior <Ariel.Elior@cavium.com>
+M:	Michal Kalderon <mkalderon@marvell.com>
+M:	Ariel Elior <aelior@marvell.com>
 L:	linux-rdma@vger.kernel.org
 S:	Supported
 F:	drivers/infiniband/hw/qedr/
@ -12505,7 +12513,7 @@ F:	Documentation/scsi/LICENSE.qla2xxx
 F:	drivers/scsi/qla2xxx/

 QLOGIC QLA3XXX NETWORK DRIVER
-M:	Dept-GELinuxNICDev@cavium.com
+M:	GR-Linux-NIC-Dev@marvell.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	Documentation/networking/device_drivers/qlogic/LICENSE.qla3xxx
@ -12519,16 +12527,16 @@ F:	Documentation/scsi/LICENSE.qla4xxx
 F:	drivers/scsi/qla4xxx/

 QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
-M:	Shahed Shaikh <Shahed.Shaikh@cavium.com>
-M:	Manish Chopra <manish.chopra@cavium.com>
-M:	Dept-GELinuxNICDev@cavium.com
+M:	Shahed Shaikh <shshaikh@marvell.com>
+M:	Manish Chopra <manishc@marvell.com>
+M:	GR-Linux-NIC-Dev@marvell.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qlcnic/

 QLOGIC QLGE 10Gb ETHERNET DRIVER
-M:	Manish Chopra <manish.chopra@cavium.com>
-M:	Dept-GELinuxNICDev@cavium.com
+M:	Manish Chopra <manishc@marvell.com>
+M:	GR-Linux-NIC-Dev@marvell.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/qlogic/qlge/
@ -12867,6 +12875,13 @@ F:	Documentation/devicetree/bindings/net/dsa/realtek-smi.txt
 F:	drivers/net/dsa/realtek-smi*
 F:	drivers/net/dsa/rtl83*

+REDPINE WIRELESS DRIVER
+M:	Amitkumar Karwar <amitkarwar@gmail.com>
+M:	Siva Rebbagondla <siva8118@gmail.com>
+L:	linux-wireless@vger.kernel.org
+S:	Maintained
+F:	drivers/net/wireless/rsi/
+
 REGISTER MAP ABSTRACTION
 M:	Mark Brown <broonie@kernel.org>
 L:	linux-kernel@vger.kernel.org
@ -13695,6 +13710,15 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/sfc/

+SFF/SFP/SFP+ MODULE SUPPORT
+M:	Russell King <linux@armlinux.org.uk>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/phy/phylink.c
+F:	drivers/net/phy/sfp*
+F:	include/linux/phylink.h
+F:	include/linux/sfp.h
+
 SGI GRU DRIVER
 M:	Dimitri Sivanich <sivanich@sgi.com>
 S:	Maintained
@ -15842,6 +15866,7 @@ F:	drivers/usb/common/usb-otg-fsm.c
 USB OVER IP DRIVER
 M:	Valentina Manea <valentina.manea.m@gmail.com>
 M:	Shuah Khan <shuah@kernel.org>
+M:	Shuah Khan <skhan@linuxfoundation.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	Documentation/usb/usbip_protocol.txt
@ -16639,6 +16664,15 @@ S:	Maintained
 F:	drivers/platform/x86/
 F:	drivers/platform/olpc/

+X86 PLATFORM DRIVERS - ARCH
+R:	Darren Hart <dvhart@infradead.org>
+R:	Andy Shevchenko <andy@infradead.org>
+L:	platform-driver-x86@vger.kernel.org
+L:	x86@kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core
+S:	Maintained
+F:	arch/x86/platform
+
 X86 VDSO
 M:	Andy Lutomirski <luto@kernel.org>
 L:	linux-kernel@vger.kernel.org
@ -16671,6 +16705,24 @@ T:	git git://linuxtv.org/media_tree.git
 S:	Maintained
 F:	drivers/media/tuners/tuner-xc2028.*

+XDP (eXpress Data Path)
+M:	Alexei Starovoitov <ast@kernel.org>
+M:	Daniel Borkmann <daniel@iogearbox.net>
+M:	David S. Miller <davem@davemloft.net>
+M:	Jakub Kicinski <jakub.kicinski@netronome.com>
+M:	Jesper Dangaard Brouer <hawk@kernel.org>
+M:	John Fastabend <john.fastabend@gmail.com>
+L:	netdev@vger.kernel.org
+L:	xdp-newbies@vger.kernel.org
+S:	Supported
+F:	net/core/xdp.c
+F:	include/net/xdp.h
+F:	kernel/bpf/devmap.c
+F:	kernel/bpf/cpumap.c
+F:	include/trace/events/xdp.h
+K:	xdp
+N:	xdp
+
 XDP SOCKETS (AF_XDP)
 M:	Björn Töpel <bjorn.topel@intel.com>
 M:	Magnus Karlsson <magnus.karlsson@intel.com>
--- a/10
+++ b/10
@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc6
 NAME = Shy Crocodile

 # *DOCUMENTATION*
@ -955,6 +955,7 @@ ifdef CONFIG_STACK_VALIDATION
  endif
 endif

+PHONY += prepare0

 ifeq ($(KBUILD_EXTMOD),)
 core-y		+= kernel/ certs/ mm/ fs/ ipc/ security/ crypto/ block/
@ -1061,8 +1062,7 @@ scripts: scripts_basic scripts_dtc
 # archprepare is used in arch Makefiles and when processed asm symlink,
 # version.h and scripts_basic is processed / created.

-# Listed in dependency order
-PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
+PHONY += prepare archprepare prepare1 prepare2 prepare3

 # prepare3 is used to check if we are building in a separate output directory,
 # and if so do:
@ -1360,11 +1360,11 @@ mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
 mrproper-dirs      := $(addprefix _mrproper_,scripts)

-PHONY += $(mrproper-dirs) mrproper archmrproper
+PHONY += $(mrproper-dirs) mrproper
 $(mrproper-dirs):
 	$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)

-mrproper: clean archmrproper $(mrproper-dirs)
+mrproper: clean $(mrproper-dirs)
 	$(call cmd,rmdirs)
 	$(call cmd,rmfiles)

--- a/arch/arc/include/asm/Kbuild
+++ b/arch/arc/include/asm/Kbuild
@ -3,23 +3,19 @@ generic-y += bugs.h
 generic-y += compat.h
 generic-y += device.h
 generic-y += div64.h
-generic-y += dma-mapping.h
 generic-y += emergency-restart.h
 generic-y += extable.h
-generic-y += fb.h
 generic-y += ftrace.h
 generic-y += hardirq.h
 generic-y += hw_irq.h
 generic-y += irq_regs.h
 generic-y += irq_work.h
-generic-y += kmap_types.h
 generic-y += local.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h
 generic-y += mm-arch-hooks.h
 generic-y += msi.h
 generic-y += parport.h
-generic-y += pci.h
 generic-y += percpu.h
 generic-y += preempt.h
 generic-y += topology.h
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@ -216,6 +216,14 @@ struct bcr_fp_arcv2 {
 #endif
 };

+struct bcr_actionpoint {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:21, min:1, num:2, ver:8;
+#else
+	unsigned int ver:8, num:2, min:1, pad:21;
+#endif
+};
+
 #include <soc/arc/timers.h>

 struct bcr_bpu_arcompact {
@ -283,7 +291,7 @@ struct cpuinfo_arc_cache {
 };

 struct cpuinfo_arc_bpu {
-	unsigned int ver, full, num_cache, num_pred;
+	unsigned int ver, full, num_cache, num_pred, ret_stk;
 };

 struct cpuinfo_arc_ccm {
@ -302,7 +310,7 @@ struct cpuinfo_arc {
 	struct {
 		unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, swape:1, pad1:2,
 			     fpu_sp:1, fpu_dp:1, dual:1, dual_enb:1, pad2:4,
-			     debug:1, ap:1, smart:1, rtt:1, pad3:4,
+			     ap_num:4, ap_full:1, smart:1, rtt:1, pad3:1,
 			     timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
 	} extn;
 	struct bcr_mpy extn_mpy;
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@ -340,7 +340,7 @@ static inline __attribute__ ((const)) int __fls(unsigned long x)
 /*
 * __ffs: Similar to ffs, but zero based (0-31)
 */
-static inline __attribute__ ((const)) int __ffs(unsigned long word)
+static inline __attribute__ ((const)) unsigned long __ffs(unsigned long word)
 {
 	if (!word)
 		return word;
@ -400,9 +400,9 @@ static inline __attribute__ ((const)) int ffs(unsigned long x)
 /*
 * __ffs: Similar to ffs, but zero based (0-31)
 */
-static inline __attribute__ ((const)) int __ffs(unsigned long x)
+static inline __attribute__ ((const)) unsigned long __ffs(unsigned long x)
 {
-	int n;
+	unsigned long n;

 	asm volatile(
 	"	ffs.f	%0, %1		\n"  /* 0:31; 31(Z) if src 0 */
--- a/arch/arc/include/asm/perf_event.h
+++ b/arch/arc/include/asm/perf_event.h
@ -103,7 +103,8 @@ static const char * const arc_pmu_ev_hw_map[] = {

 	/* counts condition */
 	[PERF_COUNT_HW_INSTRUCTIONS] = "iall",
-	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmp", /* Excludes ZOL jumps */
+	/* All jump instructions that are taken */
+	[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = "ijmptak",
 	[PERF_COUNT_ARC_BPOK]         = "bpok",	  /* NP-NT, PT-T, PNT-NT */
 #ifdef CONFIG_ISA_ARCV2
 	[PERF_COUNT_HW_BRANCH_MISSES] = "bpmp",
--- a/arch/arc/kernel/perf_event.c
+++ b/arch/arc/kernel/perf_event.c
@ -1,15 +1,10 @@
-/*
- * Linux performance counter support for ARC700 series
- *
- * Copyright (C) 2013-2015 Synopsys, Inc. (www.synopsys.com)
- *
- * This code is inspired by the perf support of various other architectures.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Linux performance counter support for ARC CPUs.
+// This code is inspired by the perf support of various other architectures.
+//
+// Copyright (C) 2013-2018 Synopsys, Inc. (www.synopsys.com)
+
 #include <linux/errno.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
@ -19,12 +14,31 @@
 #include <asm/arcregs.h>
 #include <asm/stacktrace.h>

+/* HW holds 8 symbols + one for null terminator */
+#define ARCPMU_EVENT_NAME_LEN	9
+
+enum arc_pmu_attr_groups {
+	ARCPMU_ATTR_GR_EVENTS,
+	ARCPMU_ATTR_GR_FORMATS,
+	ARCPMU_NR_ATTR_GR
+};
+
+struct arc_pmu_raw_event_entry {
+	char name[ARCPMU_EVENT_NAME_LEN];
+};
+
 struct arc_pmu {
 	struct pmu	pmu;
 	unsigned int	irq;
 	int		n_counters;
+	int		n_events;
 	u64		max_period;
 	int		ev_hw_idx[PERF_COUNT_ARC_HW_MAX];
+
+	struct arc_pmu_raw_event_entry	*raw_entry;
+	struct attribute		**attrs;
+	struct perf_pmu_events_attr	*attr;
+	const struct attribute_group	*attr_groups[ARCPMU_NR_ATTR_GR + 1];
 };

 struct arc_pmu_cpu {
@ -49,6 +63,7 @@ static int callchain_trace(unsigned int addr, void *data)
 {
 	struct arc_callchain_trace *ctrl = data;
 	struct perf_callchain_entry_ctx *entry = ctrl->perf_stuff;
+
 	perf_callchain_store(entry, addr);

 	if (ctrl->depth++ < 3)
@ -57,8 +72,8 @@ static int callchain_trace(unsigned int addr, void *data)
 	return -1;
 }

-void
-perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
+void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry,
+			   struct pt_regs *regs)
 {
 	struct arc_callchain_trace ctrl = {
 		.depth = 0,
@ -68,8 +83,8 @@ perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *re
 	arc_unwind_core(NULL, regs, callchain_trace, &ctrl);
 }

-void
-perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
+void perf_callchain_user(struct perf_callchain_entry_ctx *entry,
+			 struct pt_regs *regs)
 {
 	/*
 	 * User stack can't be unwound trivially with kernel dwarf unwinder
@ -82,10 +97,10 @@ static struct arc_pmu *arc_pmu;
 static DEFINE_PER_CPU(struct arc_pmu_cpu, arc_pmu_cpu);

 /* read counter #idx; note that counter# != event# on ARC! */
-static uint64_t arc_pmu_read_counter(int idx)
+static u64 arc_pmu_read_counter(int idx)
 {
-	uint32_t tmp;
-	uint64_t result;
+	u32 tmp;
+	u64 result;

 	/*
 	 * ARC supports making 'snapshots' of the counters, so we don't
@ -94,7 +109,7 @@ static uint64_t arc_pmu_read_counter(int idx)
 	write_aux_reg(ARC_REG_PCT_INDEX, idx);
 	tmp = read_aux_reg(ARC_REG_PCT_CONTROL);
 	write_aux_reg(ARC_REG_PCT_CONTROL, tmp | ARC_REG_PCT_CONTROL_SN);
-	result = (uint64_t) (read_aux_reg(ARC_REG_PCT_SNAPH)) << 32;
+	result = (u64) (read_aux_reg(ARC_REG_PCT_SNAPH)) << 32;
 	result |= read_aux_reg(ARC_REG_PCT_SNAPL);

 	return result;
@ -103,9 +118,9 @@ static uint64_t arc_pmu_read_counter(int idx)
 static void arc_perf_event_update(struct perf_event *event,
 				  struct hw_perf_event *hwc, int idx)
 {
-	uint64_t prev_raw_count = local64_read(&hwc->prev_count);
-	uint64_t new_raw_count = arc_pmu_read_counter(idx);
-	int64_t delta = new_raw_count - prev_raw_count;
+	u64 prev_raw_count = local64_read(&hwc->prev_count);
+	u64 new_raw_count = arc_pmu_read_counter(idx);
+	s64 delta = new_raw_count - prev_raw_count;

 	/*
 	 * We aren't afraid of hwc->prev_count changing beneath our feet
@ -155,7 +170,7 @@ static int arc_pmu_event_init(struct perf_event *event)
 	int ret;

 	if (!is_sampling_event(event)) {
-		hwc->sample_period  = arc_pmu->max_period;
+		hwc->sample_period = arc_pmu->max_period;
 		hwc->last_period = hwc->sample_period;
 		local64_set(&hwc->period_left, hwc->sample_period);
 	}
@ -192,6 +207,18 @@ static int arc_pmu_event_init(struct perf_event *event)
 		pr_debug("init cache event with h/w %08x \'%s\'\n",
 			 (int)hwc->config, arc_pmu_ev_hw_map[ret]);
 		return 0;
+
+	case PERF_TYPE_RAW:
+		if (event->attr.config >= arc_pmu->n_events)
+			return -ENOENT;
+
+		hwc->config |= event->attr.config;
+		pr_debug("init raw event with idx %lld \'%s\'\n",
+			 event->attr.config,
+			 arc_pmu->raw_entry[event->attr.config].name);
+
+		return 0;
+
 	default:
 		return -ENOENT;
 	}
@ -200,7 +227,7 @@ static int arc_pmu_event_init(struct perf_event *event)
 /* starts all counters */
 static void arc_pmu_enable(struct pmu *pmu)
 {
-	uint32_t tmp;
+	u32 tmp;
 	tmp = read_aux_reg(ARC_REG_PCT_CONTROL);
 	write_aux_reg(ARC_REG_PCT_CONTROL, (tmp & 0xffff0000) | 0x1);
 }
@ -208,7 +235,7 @@ static void arc_pmu_enable(struct pmu *pmu)
 /* stops all counters */
 static void arc_pmu_disable(struct pmu *pmu)
 {
-	uint32_t tmp;
+	u32 tmp;
 	tmp = read_aux_reg(ARC_REG_PCT_CONTROL);
 	write_aux_reg(ARC_REG_PCT_CONTROL, (tmp & 0xffff0000) | 0x0);
 }
@ -228,7 +255,7 @@ static int arc_pmu_event_set_period(struct perf_event *event)
 		local64_set(&hwc->period_left, left);
 		hwc->last_period = period;
 		overflow = 1;
-	} else	if (unlikely(left <= 0)) {
+	} else if (unlikely(left <= 0)) {
 		/* left underflowed by less than period. */
 		left += period;
 		local64_set(&hwc->period_left, left);
@ -246,8 +273,8 @@ static int arc_pmu_event_set_period(struct perf_event *event)
 	write_aux_reg(ARC_REG_PCT_INDEX, idx);

 	/* Write value */
-	write_aux_reg(ARC_REG_PCT_COUNTL, (u32)value);
-	write_aux_reg(ARC_REG_PCT_COUNTH, (value >> 32));
+	write_aux_reg(ARC_REG_PCT_COUNTL, lower_32_bits(value));
+	write_aux_reg(ARC_REG_PCT_COUNTH, upper_32_bits(value));

 	perf_event_update_userpage(event);

@ -277,7 +304,7 @@ static void arc_pmu_start(struct perf_event *event, int flags)
 	/* Enable interrupt for this counter */
 	if (is_sampling_event(event))
 		write_aux_reg(ARC_REG_PCT_INT_CTRL,
-			      read_aux_reg(ARC_REG_PCT_INT_CTRL) | (1 << idx));
+			      read_aux_reg(ARC_REG_PCT_INT_CTRL) | BIT(idx));

 	/* enable ARC pmu here */
 	write_aux_reg(ARC_REG_PCT_INDEX, idx);		/* counter # */
@ -295,9 +322,9 @@ static void arc_pmu_stop(struct perf_event *event, int flags)
 		 * Reset interrupt flag by writing of 1. This is required
 		 * to make sure pending interrupt was not left.
 		 */
-		write_aux_reg(ARC_REG_PCT_INT_ACT, 1 << idx);
+		write_aux_reg(ARC_REG_PCT_INT_ACT, BIT(idx));
 		write_aux_reg(ARC_REG_PCT_INT_CTRL,
-			      read_aux_reg(ARC_REG_PCT_INT_CTRL) & ~(1 << idx));
+			      read_aux_reg(ARC_REG_PCT_INT_CTRL) & ~BIT(idx));
 	}

 	if (!(event->hw.state & PERF_HES_STOPPED)) {
@ -349,9 +376,10 @@ static int arc_pmu_add(struct perf_event *event, int flags)

 	if (is_sampling_event(event)) {
 		/* Mimic full counter overflow as other arches do */
-		write_aux_reg(ARC_REG_PCT_INT_CNTL, (u32)arc_pmu->max_period);
+		write_aux_reg(ARC_REG_PCT_INT_CNTL,
+			      lower_32_bits(arc_pmu->max_period));
 		write_aux_reg(ARC_REG_PCT_INT_CNTH,
-			      (arc_pmu->max_period >> 32));
+			      upper_32_bits(arc_pmu->max_period));
 	}

 	write_aux_reg(ARC_REG_PCT_CONFIG, 0);
@ -392,7 +420,7 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev)
 		idx = __ffs(active_ints);

 		/* Reset interrupt flag by writing of 1 */
-		write_aux_reg(ARC_REG_PCT_INT_ACT, 1 << idx);
+		write_aux_reg(ARC_REG_PCT_INT_ACT, BIT(idx));

 		/*
 		 * On reset of "interrupt active" bit corresponding
@ -400,7 +428,7 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev)
 		 * Now we need to re-enable interrupt for the counter.
 		 */
 		write_aux_reg(ARC_REG_PCT_INT_CTRL,
-			read_aux_reg(ARC_REG_PCT_INT_CTRL) | (1 << idx));
+			read_aux_reg(ARC_REG_PCT_INT_CTRL) | BIT(idx));

 		event = pmu_cpu->act_counter[idx];
 		hwc = &event->hw;
@ -414,7 +442,7 @@ static irqreturn_t arc_pmu_intr(int irq, void *dev)
 				arc_pmu_stop(event, 0);
 		}

-		active_ints &= ~(1U << idx);
+		active_ints &= ~BIT(idx);
 	} while (active_ints);

 done:
@ -441,19 +469,108 @@ static void arc_cpu_pmu_irq_init(void *data)
 	write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff);
 }

+/* Event field occupies the bottom 15 bits of our config field */
+PMU_FORMAT_ATTR(event, "config:0-14");
+static struct attribute *arc_pmu_format_attrs[] = {
+	&format_attr_event.attr,
+	NULL,
+};
+
+static struct attribute_group arc_pmu_format_attr_gr = {
+	.name = "format",
+	.attrs = arc_pmu_format_attrs,
+};
+
+static ssize_t arc_pmu_events_sysfs_show(struct device *dev,
+					 struct device_attribute *attr,
+					 char *page)
+{
+	struct perf_pmu_events_attr *pmu_attr;
+
+	pmu_attr = container_of(attr, struct perf_pmu_events_attr, attr);
+	return sprintf(page, "event=0x%04llx\n", pmu_attr->id);
+}
+
+/*
+ * We don't add attrs here as we don't have pre-defined list of perf events.
+ * We will generate and add attrs dynamically in probe() after we read HW
+ * configuration.
+ */
+static struct attribute_group arc_pmu_events_attr_gr = {
+	.name = "events",
+};
+
+static void arc_pmu_add_raw_event_attr(int j, char *str)
+{
+	memmove(arc_pmu->raw_entry[j].name, str, ARCPMU_EVENT_NAME_LEN - 1);
+	arc_pmu->attr[j].attr.attr.name = arc_pmu->raw_entry[j].name;
+	arc_pmu->attr[j].attr.attr.mode = VERIFY_OCTAL_PERMISSIONS(0444);
+	arc_pmu->attr[j].attr.show = arc_pmu_events_sysfs_show;
+	arc_pmu->attr[j].id = j;
+	arc_pmu->attrs[j] = &(arc_pmu->attr[j].attr.attr);
+}
+
+static int arc_pmu_raw_alloc(struct device *dev)
+{
+	arc_pmu->attr = devm_kmalloc_array(dev, arc_pmu->n_events + 1,
+		sizeof(*arc_pmu->attr), GFP_KERNEL | __GFP_ZERO);
+	if (!arc_pmu->attr)
+		return -ENOMEM;
+
+	arc_pmu->attrs = devm_kmalloc_array(dev, arc_pmu->n_events + 1,
+		sizeof(*arc_pmu->attrs), GFP_KERNEL | __GFP_ZERO);
+	if (!arc_pmu->attrs)
+		return -ENOMEM;
+
+	arc_pmu->raw_entry = devm_kmalloc_array(dev, arc_pmu->n_events,
+		sizeof(*arc_pmu->raw_entry), GFP_KERNEL | __GFP_ZERO);
+	if (!arc_pmu->raw_entry)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static inline bool event_in_hw_event_map(int i, char *name)
+{
+	if (!arc_pmu_ev_hw_map[i])
+		return false;
+
+	if (!strlen(arc_pmu_ev_hw_map[i]))
+		return false;
+
+	if (strcmp(arc_pmu_ev_hw_map[i], name))
+		return false;
+
+	return true;
+}
+
+static void arc_pmu_map_hw_event(int j, char *str)
+{
+	int i;
+
+	/* See if HW condition has been mapped to a perf event_id */
+	for (i = 0; i < ARRAY_SIZE(arc_pmu_ev_hw_map); i++) {
+		if (event_in_hw_event_map(i, str)) {
+			pr_debug("mapping perf event %2d to h/w event \'%8s\' (idx %d)\n",
+				 i, str, j);
+			arc_pmu->ev_hw_idx[i] = j;
+		}
+	}
+}
+
 static int arc_pmu_device_probe(struct platform_device *pdev)
 {
 	struct arc_reg_pct_build pct_bcr;
 	struct arc_reg_cc_build cc_bcr;
-	int i, j, has_interrupts;
+	int i, has_interrupts;
 	int counter_size;	/* in bits */

 	union cc_name {
 		struct {
-			uint32_t word0, word1;
+			u32 word0, word1;
 			char sentinel;
 		} indiv;
-		char str[9];
+		char str[ARCPMU_EVENT_NAME_LEN];
 	} cc_name;


@ -463,15 +580,22 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 	BUILD_BUG_ON(ARC_PERF_MAX_COUNTERS > 32);
-	BUG_ON(pct_bcr.c > ARC_PERF_MAX_COUNTERS);
+	if (WARN_ON(pct_bcr.c > ARC_PERF_MAX_COUNTERS))
+		return -EINVAL;

 	READ_BCR(ARC_REG_CC_BUILD, cc_bcr);
-	BUG_ON(!cc_bcr.v); /* Counters exist but No countable conditions ? */
+	if (WARN(!cc_bcr.v, "Counters exist but No countable conditions?"))
+		return -EINVAL;

 	arc_pmu = devm_kzalloc(&pdev->dev, sizeof(struct arc_pmu), GFP_KERNEL);
 	if (!arc_pmu)
 		return -ENOMEM;

+	arc_pmu->n_events = cc_bcr.c;
+
+	if (arc_pmu_raw_alloc(&pdev->dev))
+		return -ENOMEM;
+
 	has_interrupts = is_isa_arcv2() ? pct_bcr.i : 0;

 	arc_pmu->n_counters = pct_bcr.c;
@ -481,30 +605,26 @@ static int arc_pmu_device_probe(struct platform_device *pdev)

 	pr_info("ARC perf\t: %d counters (%d bits), %d conditions%s\n",
 		arc_pmu->n_counters, counter_size, cc_bcr.c,
-		has_interrupts ? ", [overflow IRQ support]":"");
+		has_interrupts ? ", [overflow IRQ support]" : "");

-	cc_name.str[8] = 0;
+	cc_name.str[ARCPMU_EVENT_NAME_LEN - 1] = 0;
 	for (i = 0; i < PERF_COUNT_ARC_HW_MAX; i++)
 		arc_pmu->ev_hw_idx[i] = -1;

 	/* loop thru all available h/w condition indexes */
-	for (j = 0; j < cc_bcr.c; j++) {
-		write_aux_reg(ARC_REG_CC_INDEX, j);
+	for (i = 0; i < cc_bcr.c; i++) {
+		write_aux_reg(ARC_REG_CC_INDEX, i);
 		cc_name.indiv.word0 = read_aux_reg(ARC_REG_CC_NAME0);
 		cc_name.indiv.word1 = read_aux_reg(ARC_REG_CC_NAME1);

-		/* See if it has been mapped to a perf event_id */
-		for (i = 0; i < ARRAY_SIZE(arc_pmu_ev_hw_map); i++) {
-			if (arc_pmu_ev_hw_map[i] &&
-			    !strcmp(arc_pmu_ev_hw_map[i], cc_name.str) &&
-			    strlen(arc_pmu_ev_hw_map[i])) {
-				pr_debug("mapping perf event %2d to h/w event \'%8s\' (idx %d)\n",
-					 i, cc_name.str, j);
-				arc_pmu->ev_hw_idx[i] = j;
-			}
-		}
+		arc_pmu_map_hw_event(i, cc_name.str);
+		arc_pmu_add_raw_event_attr(i, cc_name.str);
 	}

+	arc_pmu_events_attr_gr.attrs = arc_pmu->attrs;
+	arc_pmu->attr_groups[ARCPMU_ATTR_GR_EVENTS] = &arc_pmu_events_attr_gr;
+	arc_pmu->attr_groups[ARCPMU_ATTR_GR_FORMATS] = &arc_pmu_format_attr_gr;
+
 	arc_pmu->pmu = (struct pmu) {
 		.pmu_enable	= arc_pmu_enable,
 		.pmu_disable	= arc_pmu_disable,
@ -514,6 +634,7 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 		.start		= arc_pmu_start,
 		.stop		= arc_pmu_stop,
 		.read		= arc_pmu_read,
+		.attr_groups	= arc_pmu->attr_groups,
 	};

 	if (has_interrupts) {
@ -535,17 +656,19 @@ static int arc_pmu_device_probe(struct platform_device *pdev)
 	} else
 		arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;

-	return perf_pmu_register(&arc_pmu->pmu, pdev->name, PERF_TYPE_RAW);
+	/*
+	 * perf parser doesn't really like '-' symbol in events name, so let's
+	 * use '_' in arc pct name as it goes to kernel PMU event prefix.
+	 */
+	return perf_pmu_register(&arc_pmu->pmu, "arc_pct", PERF_TYPE_RAW);
 }

-#ifdef CONFIG_OF
 static const struct of_device_id arc_pmu_match[] = {
 	{ .compatible = "snps,arc700-pct" },
 	{ .compatible = "snps,archs-pct" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, arc_pmu_match);
-#endif

 static struct platform_driver arc_pmu_driver = {
 	.driver	= {
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@ -123,6 +123,7 @@ static void read_arc_build_cfg_regs(void)
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
 	const struct id_to_str *tbl;
 	struct bcr_isa_arcv2 isa;
+	struct bcr_actionpoint ap;

 	FIX_PTR(cpu);

@ -195,6 +196,7 @@ static void read_arc_build_cfg_regs(void)
 		cpu->bpu.full = bpu.ft;
 		cpu->bpu.num_cache = 256 << bpu.bce;
 		cpu->bpu.num_pred = 2048 << bpu.pte;
+		cpu->bpu.ret_stk = 4 << bpu.rse;

 		if (cpu->core.family >= 0x54) {
 			unsigned int exec_ctrl;
@ -207,8 +209,11 @@ static void read_arc_build_cfg_regs(void)
 		}
 	}

-	READ_BCR(ARC_REG_AP_BCR, bcr);
-	cpu->extn.ap = bcr.ver ? 1 : 0;
+	READ_BCR(ARC_REG_AP_BCR, ap);
+	if (ap.ver) {
+		cpu->extn.ap_num = 2 << ap.num;
+		cpu->extn.ap_full = !!ap.min;
+	}

 	READ_BCR(ARC_REG_SMART_BCR, bcr);
 	cpu->extn.smart = bcr.ver ? 1 : 0;
@ -216,8 +221,6 @@ static void read_arc_build_cfg_regs(void)
 	READ_BCR(ARC_REG_RTT_BCR, bcr);
 	cpu->extn.rtt = bcr.ver ? 1 : 0;

-	cpu->extn.debug = cpu->extn.ap | cpu->extn.smart | cpu->extn.rtt;
-
 	READ_BCR(ARC_REG_ISA_CFG_BCR, isa);

 	/* some hacks for lack of feature BCR info in old ARC700 cores */
@ -299,10 +302,10 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)

 	if (cpu->bpu.ver)
 		n += scnprintf(buf + n, len - n,
-			      "BPU\t\t: %s%s match, cache:%d, Predict Table:%d",
+			      "BPU\t\t: %s%s match, cache:%d, Predict Table:%d Return stk: %d",
 			      IS_AVAIL1(cpu->bpu.full, "full"),
 			      IS_AVAIL1(!cpu->bpu.full, "partial"),
-			      cpu->bpu.num_cache, cpu->bpu.num_pred);
+			      cpu->bpu.num_cache, cpu->bpu.num_pred, cpu->bpu.ret_stk);

 	if (is_isa_arcv2()) {
 		struct bcr_lpb lpb;
@ -336,11 +339,17 @@ static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
 			       IS_AVAIL1(cpu->extn.fpu_sp, "SP "),
 			       IS_AVAIL1(cpu->extn.fpu_dp, "DP "));

-	if (cpu->extn.debug)
-		n += scnprintf(buf + n, len - n, "DEBUG\t\t: %s%s%s\n",
-			       IS_AVAIL1(cpu->extn.ap, "ActionPoint "),
+	if (cpu->extn.ap_num | cpu->extn.smart | cpu->extn.rtt) {
+		n += scnprintf(buf + n, len - n, "DEBUG\t\t: %s%s",
 			       IS_AVAIL1(cpu->extn.smart, "smaRT "),
 			       IS_AVAIL1(cpu->extn.rtt, "RTT "));
+		if (cpu->extn.ap_num) {
+			n += scnprintf(buf + n, len - n, "ActionPoint %d/%s",
+				       cpu->extn.ap_num,
+				       cpu->extn.ap_full ? "full":"min");
+		}
+		n += scnprintf(buf + n, len - n, "\n");
+	}

 	if (cpu->dccm.sz || cpu->iccm.sz)
 		n += scnprintf(buf + n, len - n, "Extn [CCM]\t: DCCM @ %x, %d KB / ICCM: @ %x, %d KB\n",
--- a/arch/arc/kernel/troubleshoot.c
+++ b/arch/arc/kernel/troubleshoot.c
@ -18,6 +18,8 @@
 #include <asm/arcregs.h>
 #include <asm/irqflags.h>

+#define ARC_PATH_MAX	256
+
 /*
 * Common routine to print scratch regs (r0-r12) or callee regs (r13-r25)
 *   -Prints 3 regs per line and a CR.
@ -58,11 +60,12 @@ static void show_callee_regs(struct callee_regs *cregs)
 	print_reg_file(&(cregs->r13), 13);
 }

-static void print_task_path_n_nm(struct task_struct *tsk, char *buf)
+static void print_task_path_n_nm(struct task_struct *tsk)
 {
 	char *path_nm = NULL;
 	struct mm_struct *mm;
 	struct file *exe_file;
+	char buf[ARC_PATH_MAX];

 	mm = get_task_mm(tsk);
 	if (!mm)
@ -72,7 +75,7 @@ static void print_task_path_n_nm(struct task_struct *tsk, char *buf)
 	mmput(mm);

 	if (exe_file) {
-		path_nm = file_path(exe_file, buf, 255);
+		path_nm = file_path(exe_file, buf, ARC_PATH_MAX-1);
 		fput(exe_file);
 	}

@ -80,10 +83,9 @@ done:
 	pr_info("Path: %s\n", !IS_ERR(path_nm) ? path_nm : "?");
 }

-static void show_faulting_vma(unsigned long address, char *buf)
+static void show_faulting_vma(unsigned long address)
 {
 	struct vm_area_struct *vma;
-	char *nm = buf;
 	struct mm_struct *active_mm = current->active_mm;

 	/* can't use print_vma_addr() yet as it doesn't check for
@ -96,8 +98,11 @@ static void show_faulting_vma(unsigned long address, char *buf)
 	 * if the container VMA is not found
 	 */
 	if (vma && (vma->vm_start <= address)) {
+		char buf[ARC_PATH_MAX];
+		char *nm = "?";
+
 		if (vma->vm_file) {
-			nm = file_path(vma->vm_file, buf, PAGE_SIZE - 1);
+			nm = file_path(vma->vm_file, buf, ARC_PATH_MAX-1);
 			if (IS_ERR(nm))
 				nm = "?";
 		}
@ -173,13 +178,14 @@ void show_regs(struct pt_regs *regs)
 {
 	struct task_struct *tsk = current;
 	struct callee_regs *cregs;
-	char *buf;

-	buf = (char *)__get_free_page(GFP_KERNEL);
-	if (!buf)
-		return;
+	/*
+	 * generic code calls us with preemption disabled, but some calls
+	 * here could sleep, so re-enable to avoid lockdep splat
+	 */
+	preempt_enable();

-	print_task_path_n_nm(tsk, buf);
+	print_task_path_n_nm(tsk);
 	show_regs_print_info(KERN_INFO);

 	show_ecr_verbose(regs);
@ -189,7 +195,7 @@ void show_regs(struct pt_regs *regs)
 		(void *)regs->blink, (void *)regs->ret);

 	if (user_mode(regs))
-		show_faulting_vma(regs->ret, buf); /* faulting code, not data */
+		show_faulting_vma(regs->ret); /* faulting code, not data */

 	pr_info("[STAT32]: 0x%08lx", regs->status32);

@ -222,7 +228,7 @@ void show_regs(struct pt_regs *regs)
 	if (cregs)
 		show_callee_regs(cregs);

-	free_page((unsigned long)buf);
+	preempt_disable();
 }

 void show_kernel_fault_diag(const char *str, struct pt_regs *regs,
--- a/arch/arc/lib/memset-archs.S
+++ b/arch/arc/lib/memset-archs.S
@ -7,11 +7,39 @@
 */

 #include <linux/linkage.h>
+#include <asm/cache.h>

-#undef PREALLOC_NOT_AVAIL
+/*
+ * The memset implementation below is optimized to use prefetchw and prealloc
+ * instruction in case of CPU with 64B L1 data cache line (L1_CACHE_SHIFT == 6)
+ * If you want to implement optimized memset for other possible L1 data cache
+ * line lengths (32B and 128B) you should rewrite code carefully checking
+ * we don't call any prefetchw/prealloc instruction for L1 cache lines which
+ * don't belongs to memset area.
+ */
+
+#if L1_CACHE_SHIFT == 6
+
+.macro PREALLOC_INSTR	reg, off
+	prealloc	[\reg, \off]
+.endm
+
+.macro PREFETCHW_INSTR	reg, off
+	prefetchw	[\reg, \off]
+.endm
+
+#else
+
+.macro PREALLOC_INSTR
+.endm
+
+.macro PREFETCHW_INSTR
+.endm
+
+#endif

 ENTRY_CFI(memset)
-	prefetchw [r0]		; Prefetch the write location
+	PREFETCHW_INSTR	r0, 0	; Prefetch the first write location
 	mov.f	0, r2
 ;;; if size is zero
 	jz.d	[blink]
@ -48,11 +76,8 @@ ENTRY_CFI(memset)

 	lpnz	@.Lset64bytes
 	;; LOOP START
-#ifdef PREALLOC_NOT_AVAIL
-	prefetchw [r3, 64]	;Prefetch the next write location
-#else
-	prealloc  [r3, 64]
-#endif
+	PREALLOC_INSTR	r3, 64	; alloc next line w/o fetching
+
 #ifdef CONFIG_ARC_HAS_LL64
 	std.ab	r4, [r3, 8]
 	std.ab	r4, [r3, 8]
@ -85,7 +110,6 @@ ENTRY_CFI(memset)
 	lsr.f	lp_count, r2, 5 ;Last remaining  max 124 bytes
 	lpnz	.Lset32bytes
 	;; LOOP START
-	prefetchw   [r3, 32]	;Prefetch the next write location
 #ifdef CONFIG_ARC_HAS_LL64
 	std.ab	r4, [r3, 8]
 	std.ab	r4, [r3, 8]
--- a/arch/arc/mm/fault.c
+++ b/arch/arc/mm/fault.c
@ -141,12 +141,17 @@ good_area:
 	 */
 	fault = handle_mm_fault(vma, address, flags);

-	/* If Pagefault was interrupted by SIGKILL, exit page fault "early" */
 	if (fatal_signal_pending(current)) {
-		if ((fault & VM_FAULT_ERROR) && !(fault & VM_FAULT_RETRY))
-			up_read(&mm->mmap_sem);
-		if (user_mode(regs))
+
+		/*
+		 * if fault retry, mmap_sem already relinquished by core mm
+		 * so OK to return to user mode (with signal handled first)
+		 */
+		if (fault & VM_FAULT_RETRY) {
+			if (!user_mode(regs))
+				goto no_context;
 			return;
+		}
 	}

 	perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@ -119,7 +119,8 @@ void __init setup_arch_memory(void)
 	 */

 	memblock_add_node(low_mem_start, low_mem_sz, 0);
-	memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
+	memblock_reserve(CONFIG_LINUX_LINK_BASE,
+			 __pa(_end) - CONFIG_LINUX_LINK_BASE);

 #ifdef CONFIG_BLK_DEV_INITRD
 	if (phys_initrd_size) {
--- a/arch/arm/boot/dts/am335x-shc.dts
+++ b/arch/arm/boot/dts/am335x-shc.dts
@ -215,7 +215,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	bus-width = <0x4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 	cd-inverted;
 	max-frequency = <26000000>;
 	vmmc-supply = <&vmmcsd_fixed>;
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@ -476,7 +476,7 @@
 		clocksource: timer@20000 {
 			compatible = "ti,da830-timer";
 			reg = <0x20000 0x1000>;
-			interrupts = <12>, <13>;
+			interrupts = <21>, <22>;
 			interrupt-names = "tint12", "tint34";
 			clocks = <&pll0_auxclk>;
 		};
--- a/arch/arm/boot/dts/imx6q-pistachio.dts
+++ b/arch/arm/boot/dts/imx6q-pistachio.dts
@ -103,7 +103,7 @@
 		power {
 			label = "Power Button";
 			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
+			wakeup-source;
 			linux,code = <KEY_POWER>;
 		};
 	};
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@ -309,7 +309,7 @@
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
 	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
 	keep-power-in-suspend;
-	enable-sdio-wakeup;
+	wakeup-source;
 	vmmc-supply = <&reg_sd3_vmmc>;
 	status = "okay";
 };
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@ -467,7 +467,7 @@
 			};

 			gpt: gpt@2098000 {
-				compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt";
+				compatible = "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
 				reg = <0x02098000 0x4000>;
 				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SX_CLK_GPT_BUS>,
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@ -274,7 +274,7 @@
 			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
 			reg = <0xc9410000 0x10000
 			       0xc1108108 0x4>;
-			interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
 			status = "disabled";
 		};
--- a/arch/arm/boot/dts/meson8b-ec100.dts
+++ b/arch/arm/boot/dts/meson8b-ec100.dts
@ -205,8 +205,7 @@
 		cap-sd-highspeed;
 		disable-wp;

-		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-		cd-inverted;
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

 		vmmc-supply = <&vcc_3v3>;
 	};
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@ -221,7 +221,6 @@
 		/* Realtek RTL8211F (0x001cc916) */
 		eth_phy: ethernet-phy@0 {
 			reg = <0>;
-			eee-broken-1000t;
 			interrupt-parent = <&gpio_intc>;
 			/* GPIOH_3 */
 			interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
@ -273,8 +272,7 @@
 		cap-sd-highspeed;
 		disable-wp;

-		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-		cd-inverted;
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

 		vmmc-supply = <&tflash_vdd>;
 		vqmmc-supply = <&tf_io>;
--- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@ -206,8 +206,7 @@
 		cap-sd-highspeed;
 		disable-wp;

-		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-		cd-inverted;
+		cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

 		vmmc-supply = <&vcc_3v3>;
 	};
--- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
+++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
@ -105,7 +105,7 @@
 			interrupts-extended = <
 				&cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
 				&cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
-				&cpcap 48 1
+				&cpcap 48 0
 			>;
 			interrupt-names =
 				"id_ground", "id_float", "se0conn", "vbusvld",
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@ -714,11 +714,7 @@

 	vdda-supply = <&vdac>;

-	#address-cells = <1>;
-	#size-cells = <0>;
-
 	port {
-		reg = <0>;
 		venc_out: endpoint {
 			remote-endpoint = <&opa_in>;
 			ti,channels = <1>;
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@ -814,7 +814,7 @@
 	/* For debugging, it is often good idea to remove this GPIO.
 	   It means you can remove back cover (to reboot by removing
 	   battery) and still use the MMC card. */
-	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
+	cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
 };

 /* most boards use vaux3, only some old versions use vmmc2 instead */
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@ -370,6 +370,19 @@
 		compatible = "ti,omap2-onenand";
 		reg = <0 0 0x20000>;	/* CS0, offset 0, IO size 128K */

+		/*
+		 * These timings are based on CONFIG_OMAP_GPMC_DEBUG=y reported
+		 * bootloader set values when booted with v4.19 using both N950
+		 * and N9 devices (OneNAND Manufacturer: Samsung):
+		 *
+		 *   gpmc cs0 before gpmc_cs_program_settings:
+		 *   cs0 GPMC_CS_CONFIG1: 0xfd001202
+		 *   cs0 GPMC_CS_CONFIG2: 0x00181800
+		 *   cs0 GPMC_CS_CONFIG3: 0x00030300
+		 *   cs0 GPMC_CS_CONFIG4: 0x18001804
+		 *   cs0 GPMC_CS_CONFIG5: 0x03171d1d
+		 *   cs0 GPMC_CS_CONFIG6: 0x97080000
+		 */
 		gpmc,sync-read;
 		gpmc,sync-write;
 		gpmc,burst-length = <16>;
@ -379,26 +392,27 @@
 		gpmc,device-width = <2>;
 		gpmc,mux-add-data = <2>;
 		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <87>;
-		gpmc,cs-wr-off-ns = <87>;
+		gpmc,cs-rd-off-ns = <122>;
+		gpmc,cs-wr-off-ns = <122>;
 		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <10>;
-		gpmc,adv-wr-off-ns = <10>;
-		gpmc,oe-on-ns = <15>;
-		gpmc,oe-off-ns = <87>;
+		gpmc,adv-rd-off-ns = <15>;
+		gpmc,adv-wr-off-ns = <15>;
+		gpmc,oe-on-ns = <20>;
+		gpmc,oe-off-ns = <122>;
 		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <87>;
-		gpmc,rd-cycle-ns = <112>;
-		gpmc,wr-cycle-ns = <112>;
-		gpmc,access-ns = <81>;
+		gpmc,we-off-ns = <122>;
+		gpmc,rd-cycle-ns = <148>;
+		gpmc,wr-cycle-ns = <148>;
+		gpmc,access-ns = <117>;
 		gpmc,page-burst-access-ns = <15>;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,wait-monitoring-ns = <0>;
-		gpmc,clk-activation-ns = <5>;
-		gpmc,wr-data-mux-bus-ns = <30>;
-		gpmc,wr-access-ns = <81>;
-		gpmc,sync-clk-ps = <15000>;
+		gpmc,clk-activation-ns = <10>;
+		gpmc,wr-data-mux-bus-ns = <40>;
+		gpmc,wr-access-ns = <117>;
+
+		gpmc,sync-clk-ps = <15000>; /* TBC; Where this value came? */

 		/*
 		 * MTD partition table corresponding to Nokia's MeeGo 1.2
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@ -1046,8 +1046,6 @@
 					<SYSC_IDLE_SMART>,
 					<SYSC_IDLE_SMART_WKUP>;
 			ti,syss-mask = <1>;
-			ti,no-reset-on-init;
-			ti,no-idle-on-init;
 			/* Domains (V, P, C): core, core_pwrdm, l4per_clkdm */
 			clocks = <&l4per_clkctrl OMAP5_UART3_CLKCTRL 0>;
 			clock-names = "fck";
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@ -1681,15 +1681,12 @@

 		du: display@feb00000 {
 			compatible = "renesas,du-r8a7743";
-			reg = <0 0xfeb00000 0 0x40000>,
-			      <0 0xfeb90000 0 0x1c>;
-			reg-names = "du", "lvds.0";
+			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 724>,
-				 <&cpg CPG_MOD 723>,
-				 <&cpg CPG_MOD 726>;
-			clock-names = "du.0", "du.1", "lvds.0";
+				 <&cpg CPG_MOD 723>;
+			clock-names = "du.0", "du.1";
 			status = "disabled";

 			ports {
@ -1704,6 +1701,33 @@
 				port@1 {
 					reg = <1>;
 					du_out_lvds0: endpoint {
+						remote-endpoint = <&lvds0_in>;
+					};
+				};
+			};
+		};
+
+		lvds0: lvds@feb90000 {
+			compatible = "renesas,r8a7743-lvds";
+			reg = <0 0xfeb90000 0 0x1c>;
+			clocks = <&cpg CPG_MOD 726>;
+			power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
+			resets = <&cpg 726>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					lvds0_in: endpoint {
+						remote-endpoint = <&du_out_lvds0>;
+					};
+				};
+				port@1 {
+					reg = <1>;
+					lvds0_out: endpoint {
 					};
 				};
 			};
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@ -216,6 +216,7 @@
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
+			clock-output-names = "osc24M";
 		};

 		osc32k: clk-32k {
--- a/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
+++ b/arch/arm/boot/dts/sun8i-h3-beelink-x2.dts
@ -53,7 +53,7 @@

 	aliases {
 		serial0 = &uart0;
-		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+		ethernet0 = &emac;
 		ethernet1 = &sdiowifi;
 	};

--- a/arch/arm/boot/dts/vf610-bk4.dts
+++ b/arch/arm/boot/dts/vf610-bk4.dts
@ -110,11 +110,11 @@
 	bus-num = <3>;
 	status = "okay";
 	spi-slave;
+	#address-cells = <0>;

-	slave@0 {
+	slave {
 		compatible = "lwn,bk4";
 		spi-max-frequency = <30000000>;
-		reg = <0>;
 	};
 };

--- a/arch/arm/include/asm/xen/page-coherent.h
+++ b/arch/arm/include/asm/xen/page-coherent.h
@ -1 +1,95 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_ARM_XEN_PAGE_COHERENT_H
+#define _ASM_ARM_XEN_PAGE_COHERENT_H
+
+#include <linux/dma-mapping.h>
+#include <asm/page.h>
 #include <xen/arm/page-coherent.h>
+
+static inline const struct dma_map_ops *xen_get_dma_ops(struct device *dev)
+{
+	if (dev && dev->archdata.dev_dma_ops)
+		return dev->archdata.dev_dma_ops;
+	return get_arch_dma_ops(NULL);
+}
+
+static inline void *xen_alloc_coherent_pages(struct device *hwdev, size_t size,
+		dma_addr_t *dma_handle, gfp_t flags, unsigned long attrs)
+{
+	return xen_get_dma_ops(hwdev)->alloc(hwdev, size, dma_handle, flags, attrs);
+}
+
+static inline void xen_free_coherent_pages(struct device *hwdev, size_t size,
+		void *cpu_addr, dma_addr_t dma_handle, unsigned long attrs)
+{
+	xen_get_dma_ops(hwdev)->free(hwdev, size, cpu_addr, dma_handle, attrs);
+}
+
+static inline void xen_dma_map_page(struct device *hwdev, struct page *page,
+	     dma_addr_t dev_addr, unsigned long offset, size_t size,
+	     enum dma_data_direction dir, unsigned long attrs)
+{
+	unsigned long page_pfn = page_to_xen_pfn(page);
+	unsigned long dev_pfn = XEN_PFN_DOWN(dev_addr);
+	unsigned long compound_pages =
+		(1<<compound_order(page)) * XEN_PFN_PER_PAGE;
+	bool local = (page_pfn <= dev_pfn) &&
+		(dev_pfn - page_pfn < compound_pages);
+
+	/*
+	 * Dom0 is mapped 1:1, while the Linux page can span across
+	 * multiple Xen pages, it's not possible for it to contain a
+	 * mix of local and foreign Xen pages. So if the first xen_pfn
+	 * == mfn the page is local otherwise it's a foreign page
+	 * grant-mapped in dom0. If the page is local we can safely
+	 * call the native dma_ops function, otherwise we call the xen
+	 * specific function.
+	 */
+	if (local)
+		xen_get_dma_ops(hwdev)->map_page(hwdev, page, offset, size, dir, attrs);
+	else
+		__xen_dma_map_page(hwdev, page, dev_addr, offset, size, dir, attrs);
+}
+
+static inline void xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle,
+		size_t size, enum dma_data_direction dir, unsigned long attrs)
+{
+	unsigned long pfn = PFN_DOWN(handle);
+	/*
+	 * Dom0 is mapped 1:1, while the Linux page can be spanned accross
+	 * multiple Xen page, it's not possible to have a mix of local and
+	 * foreign Xen page. Dom0 is mapped 1:1, so calling pfn_valid on a
+	 * foreign mfn will always return false. If the page is local we can
+	 * safely call the native dma_ops function, otherwise we call the xen
+	 * specific function.
+	 */
+	if (pfn_valid(pfn)) {
+		if (xen_get_dma_ops(hwdev)->unmap_page)
+			xen_get_dma_ops(hwdev)->unmap_page(hwdev, handle, size, dir, attrs);
+	} else
+		__xen_dma_unmap_page(hwdev, handle, size, dir, attrs);
+}
+
+static inline void xen_dma_sync_single_for_cpu(struct device *hwdev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	unsigned long pfn = PFN_DOWN(handle);
+	if (pfn_valid(pfn)) {
+		if (xen_get_dma_ops(hwdev)->sync_single_for_cpu)
+			xen_get_dma_ops(hwdev)->sync_single_for_cpu(hwdev, handle, size, dir);
+	} else
+		__xen_dma_sync_single_for_cpu(hwdev, handle, size, dir);
+}
+
+static inline void xen_dma_sync_single_for_device(struct device *hwdev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	unsigned long pfn = PFN_DOWN(handle);
+	if (pfn_valid(pfn)) {
+		if (xen_get_dma_ops(hwdev)->sync_single_for_device)
+			xen_get_dma_ops(hwdev)->sync_single_for_device(hwdev, handle, size, dir);
+	} else
+		__xen_dma_sync_single_for_device(hwdev, handle, size, dir);
+}
+
+#endif /* _ASM_ARM_XEN_PAGE_COHERENT_H */
--- a/arch/arm/mach-cns3xxx/pcie.c
+++ b/arch/arm/mach-cns3xxx/pcie.c
@ -83,7 +83,7 @@ static void __iomem *cns3xxx_pci_map_bus(struct pci_bus *bus,
 	} else /* remote PCI bus */
 		base = cnspci->cfg1_regs + ((busno & 0xf) << 20);

-	return base + (where & 0xffc) + (devfn << 12);
+	return base + where + (devfn << 12);
 }

 static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
@ -93,7 +93,7 @@ static int cns3xxx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
 	u32 mask = (0x1ull << (size * 8)) - 1;
 	int shift = (where % 4) * 8;

-	ret = pci_generic_config_read32(bus, devfn, where, size, val);
+	ret = pci_generic_config_read(bus, devfn, where, size, val);

 	if (ret == PCIBIOS_SUCCESSFUL && !bus->number && !devfn &&
 	    (where & 0xffc) == PCI_CLASS_REVISION)
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@ -75,8 +75,7 @@ void __init n2100_map_io(void)
 /*
 * N2100 PCI.
 */
-static int __init
-n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+static int n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;

--- a/arch/arm/mach-tango/pm.c
+++ b/arch/arm/mach-tango/pm.c
@ -3,6 +3,7 @@
 #include <linux/suspend.h>
 #include <asm/suspend.h>
 #include "smc.h"
+#include "pm.h"

 static int tango_pm_powerdown(unsigned long arg)
 {
@ -24,10 +25,7 @@ static const struct platform_suspend_ops tango_pm_ops = {
 	.valid = suspend_valid_only_mem,
 };

-static int __init tango_pm_init(void)
+void __init tango_pm_init(void)
 {
 	suspend_set_ops(&tango_pm_ops);
-	return 0;
 }
-
-late_initcall(tango_pm_init);
--- a/arch/arm/mach-tango/pm.h
+++ b/arch/arm/mach-tango/pm.h
@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifdef CONFIG_SUSPEND
+void __init tango_pm_init(void);
+#else
+#define tango_pm_init NULL
+#endif
--- a/arch/arm/mach-tango/setup.c
+++ b/arch/arm/mach-tango/setup.c
@ -2,6 +2,7 @@
 #include <asm/mach/arch.h>
 #include <asm/hardware/cache-l2x0.h>
 #include "smc.h"
+#include "pm.h"

 static void tango_l2c_write(unsigned long val, unsigned int reg)
 {
@ -15,4 +16,5 @@ DT_MACHINE_START(TANGO_DT, "Sigma Tango DT")
 	.dt_compat	= tango_dt_compat,
 	.l2c_aux_mask	= ~0,
 	.l2c_write_sec	= tango_l2c_write,
+	.init_late	= tango_pm_init,
 MACHINE_END
--- a/arch/arm/plat-pxa/ssp.c
+++ b/arch/arm/plat-pxa/ssp.c
@ -190,8 +190,6 @@ static int pxa_ssp_remove(struct platform_device *pdev)
 	if (ssp == NULL)
 		return -ENODEV;

-	iounmap(ssp->mmio_base);
-
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(res->start, resource_size(res));

@ -201,7 +199,6 @@ static int pxa_ssp_remove(struct platform_device *pdev)
 	list_del(&ssp->node);
 	mutex_unlock(&ssp_lock);

-	kfree(ssp);
 	return 0;
 }

--- a/arch/arm/xen/mm.c
+++ b/arch/arm/xen/mm.c
@ -7,7 +7,6 @@
 #include <linux/of_address.h>
 #include <linux/slab.h>
 #include <linux/types.h>
-#include <linux/dma-mapping.h>
 #include <linux/vmalloc.h>
 #include <linux/swiotlb.h>

--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@ -188,6 +188,7 @@
 		reg = <0x3a3>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
 	};
 };

--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@ -390,7 +390,7 @@
 		};

 		video-codec@1c0e000 {
-			compatible = "allwinner,sun50i-h5-video-engine";
+			compatible = "allwinner,sun50i-a64-video-engine";
 			reg = <0x01c0e000 0x1000>;
 			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
 				 <&ccu CLK_DRAM_VE>;
--- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi
@ -187,8 +187,7 @@
 	max-frequency = <100000000>;
 	disable-wp;

-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@ -305,8 +305,7 @@
 	max-frequency = <200000000>;
 	disable-wp;

-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

 	vmmc-supply = <&vddio_ao3v3>;
 	vqmmc-supply = <&vddio_tf>;
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts
@ -238,8 +238,7 @@
 	max-frequency = <100000000>;
 	disable-wp;

-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_card>;
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@ -258,8 +258,7 @@
 	max-frequency = <100000000>;
 	disable-wp;

-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

 	vmmc-supply = <&tflash_vdd>;
 	vqmmc-supply = <&tf_io>;
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi
@ -196,8 +196,7 @@
 	max-frequency = <100000000>;
 	disable-wp;

-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_card>;
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
@ -154,8 +154,7 @@
 	max-frequency = <100000000>;
 	disable-wp;

-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

 	vmmc-supply = <&vcc_3v3>;
 };
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi
@ -211,8 +211,7 @@
 	max-frequency = <100000000>;
 	disable-wp;

-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vcc_3v3>;
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts
@ -131,8 +131,7 @@
 	max-frequency = <100000000>;
 	disable-wp;

-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_card>;
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
@ -238,8 +238,7 @@
 	max-frequency = <100000000>;
 	disable-wp;

-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

 	vmmc-supply = <&vcc_3v3>;
 	vqmmc-supply = <&vcc_card>;
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts
@ -183,8 +183,7 @@
 	max-frequency = <100000000>;
 	disable-wp;

-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_card>;
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
@ -137,8 +137,7 @@
 	max-frequency = <100000000>;
 	disable-wp;

-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts
@ -356,8 +356,7 @@
 	max-frequency = <100000000>;
 	disable-wp;

-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts
@ -147,8 +147,7 @@
 	max-frequency = <100000000>;
 	disable-wp;

-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts
@ -170,8 +170,7 @@
 	max-frequency = <100000000>;
 	disable-wp;

-	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;

 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@ -404,7 +404,7 @@
 		};

 		intc: interrupt-controller@9bc0000 {
-			compatible = "arm,gic-v3";
+			compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			#redistributor-regions = <1>;
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@ -1011,6 +1011,9 @@
 				 <&cpg CPG_CORE R8A774A1_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
 			resets = <&cpg 310>;
 			status = "disabled";
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@ -1262,6 +1262,9 @@
 				 <&cpg CPG_CORE R8A7796_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 310>;
 			status = "disabled";
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@ -1068,6 +1068,9 @@
 				 <&cpg CPG_CORE R8A77965_CLK_S3D1>,
 				 <&scif_clk>;
 			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac1 0x13>, <&dmac1 0x12>,
+			       <&dmac2 0x13>, <&dmac2 0x12>;
+			dma-names = "tx", "rx", "tx", "rx";
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
 			resets = <&cpg 310>;
 			status = "disabled";
--- a/arch/arm64/include/asm/cache.h
+++ b/arch/arm64/include/asm/cache.h
@ -60,8 +60,6 @@

 #ifdef CONFIG_KASAN_SW_TAGS
 #define ARCH_SLAB_MINALIGN	(1ULL << KASAN_SHADOW_SCALE_SHIFT)
-#else
-#define ARCH_SLAB_MINALIGN	__alignof__(unsigned long long)
 #endif

 #ifndef __ASSEMBLY__
--- a/arch/arm64/include/asm/device.h
+++ b/arch/arm64/include/asm/device.h
@ -20,9 +20,6 @@ struct dev_archdata {
 #ifdef CONFIG_IOMMU_API
 	void *iommu;			/* private IOMMU data */
 #endif
-#ifdef CONFIG_XEN
-	const struct dma_map_ops *dev_dma_ops;
-#endif
 };

 struct pdev_archdata {
--- a/arch/arm64/include/asm/mmu.h
+++ b/arch/arm64/include/asm/mmu.h
@ -60,8 +60,11 @@ static inline bool arm64_kernel_use_ng_mappings(void)
 	 * later determine that kpti is required, then
 	 * kpti_install_ng_mappings() will make them non-global.
 	 */
+	if (arm64_kernel_unmapped_at_el0())
+		return true;
+
 	if (!IS_ENABLED(CONFIG_RANDOMIZE_BASE))
-		return arm64_kernel_unmapped_at_el0();
+		return false;

 	/*
 	 * KASLR is enabled so we're going to be enabling kpti on non-broken
--- a/arch/arm64/include/asm/xen/page-coherent.h
+++ b/arch/arm64/include/asm/xen/page-coherent.h
@ -1 +1,77 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_ARM64_XEN_PAGE_COHERENT_H
+#define _ASM_ARM64_XEN_PAGE_COHERENT_H
+
+#include <linux/dma-mapping.h>
+#include <asm/page.h>
 #include <xen/arm/page-coherent.h>
+
+static inline void *xen_alloc_coherent_pages(struct device *hwdev, size_t size,
+		dma_addr_t *dma_handle, gfp_t flags, unsigned long attrs)
+{
+	return dma_direct_alloc(hwdev, size, dma_handle, flags, attrs);
+}
+
+static inline void xen_free_coherent_pages(struct device *hwdev, size_t size,
+		void *cpu_addr, dma_addr_t dma_handle, unsigned long attrs)
+{
+	dma_direct_free(hwdev, size, cpu_addr, dma_handle, attrs);
+}
+
+static inline void xen_dma_sync_single_for_cpu(struct device *hwdev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	unsigned long pfn = PFN_DOWN(handle);
+
+	if (pfn_valid(pfn))
+		dma_direct_sync_single_for_cpu(hwdev, handle, size, dir);
+	else
+		__xen_dma_sync_single_for_cpu(hwdev, handle, size, dir);
+}
+
+static inline void xen_dma_sync_single_for_device(struct device *hwdev,
+		dma_addr_t handle, size_t size, enum dma_data_direction dir)
+{
+	unsigned long pfn = PFN_DOWN(handle);
+	if (pfn_valid(pfn))
+		dma_direct_sync_single_for_device(hwdev, handle, size, dir);
+	else
+		__xen_dma_sync_single_for_device(hwdev, handle, size, dir);
+}
+
+static inline void xen_dma_map_page(struct device *hwdev, struct page *page,
+	     dma_addr_t dev_addr, unsigned long offset, size_t size,
+	     enum dma_data_direction dir, unsigned long attrs)
+{
+	unsigned long page_pfn = page_to_xen_pfn(page);
+	unsigned long dev_pfn = XEN_PFN_DOWN(dev_addr);
+	unsigned long compound_pages =
+		(1<<compound_order(page)) * XEN_PFN_PER_PAGE;
+	bool local = (page_pfn <= dev_pfn) &&
+		(dev_pfn - page_pfn < compound_pages);
+
+	if (local)
+		dma_direct_map_page(hwdev, page, offset, size, dir, attrs);
+	else
+		__xen_dma_map_page(hwdev, page, dev_addr, offset, size, dir, attrs);
+}
+
+static inline void xen_dma_unmap_page(struct device *hwdev, dma_addr_t handle,
+		size_t size, enum dma_data_direction dir, unsigned long attrs)
+{
+	unsigned long pfn = PFN_DOWN(handle);
+	/*
+	 * Dom0 is mapped 1:1, while the Linux page can be spanned accross
+	 * multiple Xen page, it's not possible to have a mix of local and
+	 * foreign Xen page. Dom0 is mapped 1:1, so calling pfn_valid on a
+	 * foreign mfn will always return false. If the page is local we can
+	 * safely call the native dma_ops function, otherwise we call the xen
+	 * specific function.
+	 */
+	if (pfn_valid(pfn))
+		dma_direct_unmap_page(hwdev, handle, size, dir, attrs);
+	else
+		__xen_dma_unmap_page(hwdev, handle, size, dir, attrs);
+}
+
+#endif /* _ASM_ARM64_XEN_PAGE_COHERENT_H */
--- a/arch/arm64/kernel/hibernate.c
+++ b/arch/arm64/kernel/hibernate.c
@ -299,8 +299,10 @@ int swsusp_arch_suspend(void)
 		dcache_clean_range(__idmap_text_start, __idmap_text_end);

 		/* Clean kvm setup code to PoC? */
-		if (el2_reset_needed())
+		if (el2_reset_needed()) {
 			dcache_clean_range(__hyp_idmap_text_start, __hyp_idmap_text_end);
+			dcache_clean_range(__hyp_text_start, __hyp_text_end);
+		}

 		/* make the crash dump kernel image protected again */
 		crash_post_resume();
--- a/arch/arm64/kernel/hyp-stub.S
+++ b/arch/arm64/kernel/hyp-stub.S
@ -28,6 +28,8 @@
 #include <asm/virt.h>

 	.text
+	.pushsection	.hyp.text, "ax"
+
 	.align 11

 ENTRY(__hyp_stub_vectors)
--- a/arch/arm64/kernel/kaslr.c
+++ b/arch/arm64/kernel/kaslr.c
@ -14,6 +14,7 @@
 #include <linux/sched.h>
 #include <linux/types.h>

+#include <asm/cacheflush.h>
 #include <asm/fixmap.h>
 #include <asm/kernel-pgtable.h>
 #include <asm/memory.h>
@ -43,7 +44,7 @@ static __init u64 get_kaslr_seed(void *fdt)
 	return ret;
 }

-static __init const u8 *get_cmdline(void *fdt)
+static __init const u8 *kaslr_get_cmdline(void *fdt)
 {
 	static __initconst const u8 default_cmdline[] = CONFIG_CMDLINE;

@ -87,6 +88,7 @@ u64 __init kaslr_early_init(u64 dt_phys)
 	 * we end up running with module randomization disabled.
 	 */
 	module_alloc_base = (u64)_etext - MODULES_VSIZE;
+	__flush_dcache_area(&module_alloc_base, sizeof(module_alloc_base));

 	/*
 	 * Try to map the FDT early. If this fails, we simply bail,
@ -109,7 +111,7 @@ u64 __init kaslr_early_init(u64 dt_phys)
 	 * Check if 'nokaslr' appears on the command line, and
 	 * return 0 if that is the case.
 	 */
-	cmdline = get_cmdline(fdt);
+	cmdline = kaslr_get_cmdline(fdt);
 	str = strstr(cmdline, "nokaslr");
 	if (str == cmdline || (str > cmdline && *(str - 1) == ' '))
 		return 0;
@ -169,5 +171,8 @@ u64 __init kaslr_early_init(u64 dt_phys)
 	module_alloc_base += (module_range * (seed & ((1 << 21) - 1))) >> 21;
 	module_alloc_base &= PAGE_MASK;

+	__flush_dcache_area(&module_alloc_base, sizeof(module_alloc_base));
+	__flush_dcache_area(&memstart_offset_seed, sizeof(memstart_offset_seed));
+
 	return offset;
 }
--- a/arch/arm64/kernel/machine_kexec_file.c
+++ b/arch/arm64/kernel/machine_kexec_file.c
@ -120,10 +120,12 @@ static int create_dtb(struct kimage *image,
 {
 	void *buf;
 	size_t buf_size;
+	size_t cmdline_len;
 	int ret;

+	cmdline_len = cmdline ? strlen(cmdline) : 0;
 	buf_size = fdt_totalsize(initial_boot_params)
-			+ strlen(cmdline) + DTB_EXTRA_SPACE;
+			+ cmdline_len + DTB_EXTRA_SPACE;

 	for (;;) {
 		buf = vmalloc(buf_size);
--- a/arch/arm64/kernel/probes/kprobes.c
+++ b/arch/arm64/kernel/probes/kprobes.c
@ -478,13 +478,13 @@ bool arch_within_kprobe_blacklist(unsigned long addr)
 	    addr < (unsigned long)__entry_text_end) ||
 	    (addr >= (unsigned long)__idmap_text_start &&
 	    addr < (unsigned long)__idmap_text_end) ||
+	    (addr >= (unsigned long)__hyp_text_start &&
+	    addr < (unsigned long)__hyp_text_end) ||
 	    !!search_exception_tables(addr))
 		return true;

 	if (!is_kernel_in_hyp_mode()) {
-		if ((addr >= (unsigned long)__hyp_text_start &&
-		    addr < (unsigned long)__hyp_text_end) ||
-		    (addr >= (unsigned long)__hyp_idmap_text_start &&
+		if ((addr >= (unsigned long)__hyp_idmap_text_start &&
 		    addr < (unsigned long)__hyp_idmap_text_end))
 			return true;
 	}
--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@ -466,9 +466,7 @@ void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
 	__iommu_setup_dma_ops(dev, dma_base, size, iommu);

 #ifdef CONFIG_XEN
-	if (xen_initial_domain()) {
-		dev->archdata.dev_dma_ops = dev->dma_ops;
+	if (xen_initial_domain())
 		dev->dma_ops = xen_dma_ops;
-	}
 #endif
 }
--- a/arch/arm64/mm/dump.c
+++ b/arch/arm64/mm/dump.c
@ -286,74 +286,73 @@ static void note_page(struct pg_state *st, unsigned long addr, unsigned level,

 }

-static void walk_pte(struct pg_state *st, pmd_t *pmdp, unsigned long start)
+static void walk_pte(struct pg_state *st, pmd_t *pmdp, unsigned long start,
+		     unsigned long end)
 {
-	pte_t *ptep = pte_offset_kernel(pmdp, 0UL);
-	unsigned long addr;
-	unsigned i;
+	unsigned long addr = start;
+	pte_t *ptep = pte_offset_kernel(pmdp, start);

-	for (i = 0; i < PTRS_PER_PTE; i++, ptep++) {
-		addr = start + i * PAGE_SIZE;
+	do {
 		note_page(st, addr, 4, READ_ONCE(pte_val(*ptep)));
-	}
+	} while (ptep++, addr += PAGE_SIZE, addr != end);
 }

-static void walk_pmd(struct pg_state *st, pud_t *pudp, unsigned long start)
+static void walk_pmd(struct pg_state *st, pud_t *pudp, unsigned long start,
+		     unsigned long end)
 {
-	pmd_t *pmdp = pmd_offset(pudp, 0UL);
-	unsigned long addr;
-	unsigned i;
+	unsigned long next, addr = start;
+	pmd_t *pmdp = pmd_offset(pudp, start);

-	for (i = 0; i < PTRS_PER_PMD; i++, pmdp++) {
+	do {
 		pmd_t pmd = READ_ONCE(*pmdp);
+		next = pmd_addr_end(addr, end);

-		addr = start + i * PMD_SIZE;
 		if (pmd_none(pmd) || pmd_sect(pmd)) {
 			note_page(st, addr, 3, pmd_val(pmd));
 		} else {
 			BUG_ON(pmd_bad(pmd));
-			walk_pte(st, pmdp, addr);
+			walk_pte(st, pmdp, addr, next);
 		}
-	}
+	} while (pmdp++, addr = next, addr != end);
 }

-static void walk_pud(struct pg_state *st, pgd_t *pgdp, unsigned long start)
+static void walk_pud(struct pg_state *st, pgd_t *pgdp, unsigned long start,
+		     unsigned long end)
 {
-	pud_t *pudp = pud_offset(pgdp, 0UL);
-	unsigned long addr;
-	unsigned i;
+	unsigned long next, addr = start;
+	pud_t *pudp = pud_offset(pgdp, start);

-	for (i = 0; i < PTRS_PER_PUD; i++, pudp++) {
+	do {
 		pud_t pud = READ_ONCE(*pudp);
+		next = pud_addr_end(addr, end);

-		addr = start + i * PUD_SIZE;
 		if (pud_none(pud) || pud_sect(pud)) {
 			note_page(st, addr, 2, pud_val(pud));
 		} else {
 			BUG_ON(pud_bad(pud));
-			walk_pmd(st, pudp, addr);
+			walk_pmd(st, pudp, addr, next);
 		}
-	}
+	} while (pudp++, addr = next, addr != end);
 }

 static void walk_pgd(struct pg_state *st, struct mm_struct *mm,
 		     unsigned long start)
 {
-	pgd_t *pgdp = pgd_offset(mm, 0UL);
-	unsigned i;
-	unsigned long addr;
+	unsigned long end = (start < TASK_SIZE_64) ? TASK_SIZE_64 : 0;
+	unsigned long next, addr = start;
+	pgd_t *pgdp = pgd_offset(mm, start);

-	for (i = 0; i < PTRS_PER_PGD; i++, pgdp++) {
+	do {
 		pgd_t pgd = READ_ONCE(*pgdp);
+		next = pgd_addr_end(addr, end);

-		addr = start + i * PGDIR_SIZE;
 		if (pgd_none(pgd)) {
 			note_page(st, addr, 1, pgd_val(pgd));
 		} else {
 			BUG_ON(pgd_bad(pgd));
-			walk_pud(st, pgdp, addr);
+			walk_pud(st, pgdp, addr, next);
 		}
-	}
+	} while (pgdp++, addr = next, addr != end);
 }

 void ptdump_walk_pgd(struct seq_file *m, struct ptdump_info *info)
--- a/arch/arm64/mm/flush.c
+++ b/arch/arm64/mm/flush.c
@ -33,7 +33,11 @@ void sync_icache_aliases(void *kaddr, unsigned long len)
 		__clean_dcache_area_pou(kaddr, len);
 		__flush_icache_all();
 	} else {
-		flush_icache_range(addr, addr + len);
+		/*
+		 * Don't issue kick_all_cpus_sync() after I-cache invalidation
+		 * for user mappings.
+		 */
+		__flush_icache_range(addr, addr + len);
 	}
 }

--- a/arch/c6x/include/asm/Kbuild
+++ b/arch/c6x/include/asm/Kbuild
@ -30,6 +30,7 @@ generic-y += pgalloc.h
 generic-y += preempt.h
 generic-y += segment.h
 generic-y += serial.h
+generic-y += shmparam.h
 generic-y += tlbflush.h
 generic-y += topology.h
 generic-y += trace_clock.h
--- a/arch/c6x/include/uapi/asm/Kbuild
+++ b/arch/c6x/include/uapi/asm/Kbuild
@ -1,5 +1,4 @@
 include include/uapi/asm-generic/Kbuild.asm

 generic-y += kvm_para.h
-generic-y += shmparam.h
 generic-y += ucontext.h
--- a/arch/h8300/Makefile
+++ b/arch/h8300/Makefile
@ -37,8 +37,6 @@ libs-y	+= arch/$(ARCH)/lib/

 boot := arch/h8300/boot

-archmrproper:
-
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)

--- a/arch/h8300/include/asm/Kbuild
+++ b/arch/h8300/include/asm/Kbuild
@ -40,6 +40,7 @@ generic-y += preempt.h
 generic-y += scatterlist.h
 generic-y += sections.h
 generic-y += serial.h
+generic-y += shmparam.h
 generic-y += sizes.h
 generic-y += spinlock.h
 generic-y += timex.h
--- a/arch/h8300/include/uapi/asm/Kbuild
+++ b/arch/h8300/include/uapi/asm/Kbuild
@ -1,5 +1,4 @@
 include include/uapi/asm-generic/Kbuild.asm

 generic-y += kvm_para.h
-generic-y += shmparam.h
 generic-y += ucontext.h
--- a/Show More
+++ b/Show More