w1: new w1_ds2406 driver
Some preliminary work at making use of this driver led me to implement CRC-16 checks on read and write to deal with the occasional glitchiness of the 1-Wire bus. The revised driver (attached) returns an I/O error if the CRC check fails. When reading the chip's state, either you get a valid indication or you get an I/O error. When changing its state, either the change is successful or an I/O error is returned. Signed-off-by: Scott Alfter <scott@alfter.us> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>hifive-unleashed-5.1
Scott Alfter
Greg Kroah-Hartman
parent
7242d42ace
commit
94859308a2
|
|
@ -0,0 +1,25 @@
|
|||
w1_ds2406 kernel driver
|
||||
=======================
|
||||
|
||||
Supported chips:
|
||||
* Maxim DS2406 (and other family 0x12) addressable switches
|
||||
|
||||
Author: Scott Alfter <scott@alfter.us>
|
||||
|
||||
Description
|
||||
-----------
|
||||
|
||||
The w1_ds2406 driver allows connected devices to be switched on and off.
|
||||
These chips also provide 128 bytes of OTP EPROM, but reading/writing it is
|
||||
not supported. In TSOC-6 form, the DS2406 provides two switch outputs and
|
||||
can be provided with power on a dedicated input. In TO-92 form, it provides
|
||||
one output and uses parasitic power only.
|
||||
|
||||
The driver provides two sysfs files. state is readable; it gives the
|
||||
current state of each switch, with PIO A in bit 0 and PIO B in bit 1. The
|
||||
driver ORs this state with 0x30, so shell scripts get an ASCII 0/1/2/3 to
|
||||
work with. output is writable; bits 0 and 1 control PIO A and B,
|
||||
respectively. Bits 2-7 are ignored, so it's safe to write ASCII data.
|
||||
|
||||
CRCs are checked on read and write. Failed checks cause an I/O error to be
|
||||
returned. On a failed write, the switch status is not changed.
|
||||
|
|
@ -38,6 +38,13 @@ config W1_SLAVE_DS2413
|
|||
Say Y here if you want to use a 1-wire
|
||||
DS2413 Dual Channel Addressable Switch device support
|
||||
|
||||
config W1_SLAVE_DS2406
|
||||
tristate "Dual Channel Addressable Switch 0x12 family support (DS2406)"
|
||||
help
|
||||
Say Y or M here if you want to use a 1-wire
|
||||
DS2406 Dual Channel Addressable Switch. EPROM read/write
|
||||
support for these devices is not implemented.
|
||||
|
||||
config W1_SLAVE_DS2423
|
||||
tristate "Counter 1-wire device (DS2423)"
|
||||
select CRC16
|
||||
|
|
|
|||
|
|
@ -6,6 +6,7 @@ obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o
|
|||
obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o
|
||||
obj-$(CONFIG_W1_SLAVE_DS2408) += w1_ds2408.o
|
||||
obj-$(CONFIG_W1_SLAVE_DS2413) += w1_ds2413.o
|
||||
obj-$(CONFIG_W1_SLAVE_DS2406) += w1_ds2406.o
|
||||
obj-$(CONFIG_W1_SLAVE_DS2423) += w1_ds2423.o
|
||||
obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o
|
||||
obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,168 @@
|
|||
/*
|
||||
* w1_ds2406.c - w1 family 12 (DS2406) driver
|
||||
* based on w1_ds2413.c by Mariusz Bialonczyk <manio@skyboo.net>
|
||||
*
|
||||
* Copyright (c) 2014 Scott Alfter <scott@alfter.us>
|
||||
*
|
||||
* This source code is licensed under the GNU General Public License,
|
||||
* Version 2. See the file COPYING for more details.
|
||||
*/
|
||||
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/moduleparam.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/crc16.h>
|
||||
|
||||
#include "../w1.h"
|
||||
#include "../w1_int.h"
|
||||
#include "../w1_family.h"
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_AUTHOR("Scott Alfter <scott@alfter.us>");
|
||||
MODULE_DESCRIPTION("w1 family 12 driver for DS2406 2 Pin IO");
|
||||
|
||||
#define W1_F12_FUNC_READ_STATUS 0xAA
|
||||
#define W1_F12_FUNC_WRITE_STATUS 0x55
|
||||
|
||||
static ssize_t w1_f12_read_state(
|
||||
struct file *filp, struct kobject *kobj,
|
||||
struct bin_attribute *bin_attr,
|
||||
char *buf, loff_t off, size_t count)
|
||||
{
|
||||
u8 w1_buf[6]={W1_F12_FUNC_READ_STATUS, 7, 0, 0, 0, 0};
|
||||
struct w1_slave *sl = kobj_to_w1_slave(kobj);
|
||||
u16 crc=0;
|
||||
int i;
|
||||
ssize_t rtnval=1;
|
||||
|
||||
if (off != 0)
|
||||
return 0;
|
||||
if (!buf)
|
||||
return -EINVAL;
|
||||
|
||||
mutex_lock(&sl->master->bus_mutex);
|
||||
|
||||
if (w1_reset_select_slave(sl)) {
|
||||
mutex_unlock(&sl->master->bus_mutex);
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
w1_write_block(sl->master, w1_buf, 3);
|
||||
w1_read_block(sl->master, w1_buf+3, 3);
|
||||
for (i=0; i<6; i++)
|
||||
crc=crc16_byte(crc, w1_buf[i]);
|
||||
if (crc==0xb001) /* good read? */
|
||||
*buf=((w1_buf[3]>>5)&3)|0x30;
|
||||
else
|
||||
rtnval=-EIO;
|
||||
|
||||
mutex_unlock(&sl->master->bus_mutex);
|
||||
|
||||
return rtnval;
|
||||
}
|
||||
|
||||
static ssize_t w1_f12_write_output(
|
||||
struct file *filp, struct kobject *kobj,
|
||||
struct bin_attribute *bin_attr,
|
||||
char *buf, loff_t off, size_t count)
|
||||
{
|
||||
struct w1_slave *sl = kobj_to_w1_slave(kobj);
|
||||
u8 w1_buf[6]={W1_F12_FUNC_WRITE_STATUS, 7, 0, 0, 0, 0};
|
||||
u16 crc=0;
|
||||
int i;
|
||||
ssize_t rtnval=1;
|
||||
|
||||
if (count != 1 || off != 0)
|
||||
return -EFAULT;
|
||||
|
||||
mutex_lock(&sl->master->bus_mutex);
|
||||
|
||||
if (w1_reset_select_slave(sl)) {
|
||||
mutex_unlock(&sl->master->bus_mutex);
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
w1_buf[3] = (((*buf)&3)<<5)|0x1F;
|
||||
w1_write_block(sl->master, w1_buf, 4);
|
||||
w1_read_block(sl->master, w1_buf+4, 2);
|
||||
for (i=0; i<6; i++)
|
||||
crc=crc16_byte(crc, w1_buf[i]);
|
||||
if (crc==0xb001) /* good read? */
|
||||
w1_write_8(sl->master, 0xFF);
|
||||
else
|
||||
rtnval=-EIO;
|
||||
|
||||
mutex_unlock(&sl->master->bus_mutex);
|
||||
return rtnval;
|
||||
}
|
||||
|
||||
#define NB_SYSFS_BIN_FILES 2
|
||||
static struct bin_attribute w1_f12_sysfs_bin_files[NB_SYSFS_BIN_FILES] = {
|
||||
{
|
||||
.attr = {
|
||||
.name = "state",
|
||||
.mode = S_IRUGO,
|
||||
},
|
||||
.size = 1,
|
||||
.read = w1_f12_read_state,
|
||||
},
|
||||
{
|
||||
.attr = {
|
||||
.name = "output",
|
||||
.mode = S_IRUGO | S_IWUSR | S_IWGRP,
|
||||
},
|
||||
.size = 1,
|
||||
.write = w1_f12_write_output,
|
||||
}
|
||||
};
|
||||
|
||||
static int w1_f12_add_slave(struct w1_slave *sl)
|
||||
{
|
||||
int err = 0;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < NB_SYSFS_BIN_FILES && !err; ++i)
|
||||
err = sysfs_create_bin_file(
|
||||
&sl->dev.kobj,
|
||||
&(w1_f12_sysfs_bin_files[i]));
|
||||
if (err)
|
||||
while (--i >= 0)
|
||||
sysfs_remove_bin_file(&sl->dev.kobj,
|
||||
&(w1_f12_sysfs_bin_files[i]));
|
||||
return err;
|
||||
}
|
||||
|
||||
static void w1_f12_remove_slave(struct w1_slave *sl)
|
||||
{
|
||||
int i;
|
||||
for (i = NB_SYSFS_BIN_FILES - 1; i >= 0; --i)
|
||||
sysfs_remove_bin_file(&sl->dev.kobj,
|
||||
&(w1_f12_sysfs_bin_files[i]));
|
||||
}
|
||||
|
||||
static struct w1_family_ops w1_f12_fops = {
|
||||
.add_slave = w1_f12_add_slave,
|
||||
.remove_slave = w1_f12_remove_slave,
|
||||
};
|
||||
|
||||
static struct w1_family w1_family_12 = {
|
||||
.fid = W1_FAMILY_DS2406,
|
||||
.fops = &w1_f12_fops,
|
||||
};
|
||||
|
||||
static int __init w1_f12_init(void)
|
||||
{
|
||||
return w1_register_family(&w1_family_12);
|
||||
}
|
||||
|
||||
static void __exit w1_f12_exit(void)
|
||||
{
|
||||
w1_unregister_family(&w1_family_12);
|
||||
}
|
||||
|
||||
module_init(w1_f12_init);
|
||||
module_exit(w1_f12_exit);
|
||||
|
|
@ -40,6 +40,7 @@
|
|||
#define W1_FAMILY_DS2760 0x30
|
||||
#define W1_FAMILY_DS2780 0x32
|
||||
#define W1_FAMILY_DS2413 0x3A
|
||||
#define W1_FAMILY_DS2406 0x12
|
||||
#define W1_THERM_DS1825 0x3B
|
||||
#define W1_FAMILY_DS2781 0x3D
|
||||
#define W1_THERM_DS28EA00 0x42
|
||||
|
|
|
|||
Loading…
Reference in New Issue