redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

omap3 gpmc: functionality enhancement 

few functions added in gpmc module and to be used by other drivers like NAND.

Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
hifive-unleashed-5.1
Sukumar Ghorai 2010-07-09 09:14:44 +00:00 committed by Tony Lindgren
parent 055a1b8c99
commit 948d38e799
3 changed files with 301 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

275
arch/arm/mach-omap2/gpmc.c
View File

@ -46,8 +46,9 @@
#define GPMC_ECC_CONFIG 0x1f4
#define GPMC_ECC_CONTROL 0x1f8
#define GPMC_ECC_SIZE_CONFIG 0x1fc
#define GPMC_ECC1_RESULT 0x200
#define GPMC_CS0 0x60
#define GPMC_CS0_OFFSET 0x60
#define GPMC_CS_SIZE 0x30
#define GPMC_MEM_START 0x00000000
@ -92,7 +93,8 @@ struct omap3_gpmc_regs {
static struct resource gpmc_mem_root;
static struct resource gpmc_cs_mem[GPMC_CS_NUM];
static DEFINE_SPINLOCK(gpmc_mem_lock);
static unsigned gpmc_cs_map;
static unsigned int gpmc_cs_map; /* flag for cs which are initialized */
static int gpmc_ecc_used = -EINVAL; /* cs using ecc engine */
static void __iomem *gpmc_base;
@ -108,11 +110,27 @@ static u32 gpmc_read_reg(int idx)
return __raw_readl(gpmc_base + idx);
}
static void gpmc_cs_write_byte(int cs, int idx, u8 val)
{
void __iomem *reg_addr;
reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
__raw_writeb(val, reg_addr);
}
static u8 gpmc_cs_read_byte(int cs, int idx)
{
void __iomem *reg_addr;
reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
return __raw_readb(reg_addr);
}
void gpmc_cs_write_reg(int cs, int idx, u32 val)
{
void __iomem *reg_addr;
reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx;
reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
__raw_writel(val, reg_addr);
}
@ -120,7 +138,7 @@ u32 gpmc_cs_read_reg(int cs, int idx)
{
void __iomem *reg_addr;
reg_addr = gpmc_base + GPMC_CS0 + (cs * GPMC_CS_SIZE) + idx;
reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
return __raw_readl(reg_addr);
}
@ -418,9 +436,158 @@ void gpmc_cs_free(int cs)
}
EXPORT_SYMBOL(gpmc_cs_free);
/**
* gpmc_read_status - read access request to get the different gpmc status
* @cmd: command type
* @return status
*/
int gpmc_read_status(int cmd)
{
int status = -EINVAL;
u32 regval = 0;
switch (cmd) {
case GPMC_GET_IRQ_STATUS:
status = gpmc_read_reg(GPMC_IRQSTATUS);
break;
case GPMC_PREFETCH_FIFO_CNT:
regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval);
break;
case GPMC_PREFETCH_COUNT:
regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
status = GPMC_PREFETCH_STATUS_COUNT(regval);
break;
case GPMC_STATUS_BUFFER:
regval = gpmc_read_reg(GPMC_STATUS);
/* 1 : buffer is available to write */
status = regval & GPMC_STATUS_BUFF_EMPTY;
break;
default:
printk(KERN_ERR "gpmc_read_status: Not supported\n");
}
return status;
}
EXPORT_SYMBOL(gpmc_read_status);
/**
* gpmc_cs_configure - write request to configure gpmc
* @cs: chip select number
* @cmd: command type
* @wval: value to write
* @return status of the operation
*/
int gpmc_cs_configure(int cs, int cmd, int wval)
{
int err = 0;
u32 regval = 0;
switch (cmd) {
case GPMC_SET_IRQ_STATUS:
gpmc_write_reg(GPMC_IRQSTATUS, wval);
break;
case GPMC_CONFIG_WP:
regval = gpmc_read_reg(GPMC_CONFIG);
if (wval)
regval &= ~GPMC_CONFIG_WRITEPROTECT; /* WP is ON */
else
regval |= GPMC_CONFIG_WRITEPROTECT; /* WP is OFF */
gpmc_write_reg(GPMC_CONFIG, regval);
break;
case GPMC_CONFIG_RDY_BSY:
regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
if (wval)
regval |= WR_RD_PIN_MONITORING;
else
regval &= ~WR_RD_PIN_MONITORING;
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
break;
case GPMC_CONFIG_DEV_SIZE:
regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
regval |= GPMC_CONFIG1_DEVICESIZE(wval);
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
break;
case GPMC_CONFIG_DEV_TYPE:
regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
regval |= GPMC_CONFIG1_DEVICETYPE(wval);
if (wval == GPMC_DEVICETYPE_NOR)
regval |= GPMC_CONFIG1_MUXADDDATA;
gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval);
break;
default:
printk(KERN_ERR "gpmc_configure_cs: Not supported\n");
err = -EINVAL;
}
return err;
}
EXPORT_SYMBOL(gpmc_cs_configure);
/**
* gpmc_nand_read - nand specific read access request
* @cs: chip select number
* @cmd: command type
*/
int gpmc_nand_read(int cs, int cmd)
{
int rval = -EINVAL;
switch (cmd) {
case GPMC_NAND_DATA:
rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA);
break;
default:
printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n");
}
return rval;
}
EXPORT_SYMBOL(gpmc_nand_read);
/**
* gpmc_nand_write - nand specific write request
* @cs: chip select number
* @cmd: command type
* @wval: value to write
*/
int gpmc_nand_write(int cs, int cmd, int wval)
{
int err = 0;
switch (cmd) {
case GPMC_NAND_COMMAND:
gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval);
break;
case GPMC_NAND_ADDRESS:
gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval);
break;
case GPMC_NAND_DATA:
gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval);
default:
printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n");
err = -EINVAL;
}
return err;
}
EXPORT_SYMBOL(gpmc_nand_write);
/**
* gpmc_prefetch_enable - configures and starts prefetch transfer
* @cs: nand cs (chip select) number
* @cs: cs (chip select) number
* @dma_mode: dma mode enable (1) or disable (0)
* @u32_count: number of bytes to be transferred
* @is_write: prefetch read(0) or write post(1) mode
@ -428,7 +595,6 @@ EXPORT_SYMBOL(gpmc_cs_free);
int gpmc_prefetch_enable(int cs, int dma_mode,
unsigned int u32_count, int is_write)
{
uint32_t prefetch_config1;
if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
/* Set the amount of bytes to be prefetched */
@ -437,17 +603,17 @@ int gpmc_prefetch_enable(int cs, int dma_mode,
/* Set dma/mpu mode, the prefetch read / post write and
* enable the engine. Set which cs is has requested for.
*/
prefetch_config1 = ((cs << CS_NUM_SHIFT) |
gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
PREFETCH_FIFOTHRESHOLD |
ENABLE_PREFETCH |
(dma_mode << DMA_MPU_MODE) |
(0x1 & is_write));
gpmc_write_reg(GPMC_PREFETCH_CONFIG1, prefetch_config1);
(0x1 & is_write)));
/* Start the prefetch engine */
gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
} else {
return -EBUSY;
}
/* Start the prefetch engine */
gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
return 0;
}
@ -456,13 +622,22 @@ EXPORT_SYMBOL(gpmc_prefetch_enable);
/**
* gpmc_prefetch_reset - disables and stops the prefetch engine
*/
void gpmc_prefetch_reset(void)
int gpmc_prefetch_reset(int cs)
{
u32 config1;
/* check if the same module/cs is trying to reset */
config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs)
return -EINVAL;
/* Stop the PFPW engine */
gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
/* Reset/disable the PFPW engine */
gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
return 0;
}
EXPORT_SYMBOL(gpmc_prefetch_reset);
@ -615,3 +790,79 @@ void omap3_gpmc_restore_context(void)
}
}
#endif /* CONFIG_ARCH_OMAP3 */
/**
* gpmc_enable_hwecc - enable hardware ecc functionality
* @cs: chip select number
* @mode: read/write mode
* @dev_width: device bus width(1 for x16, 0 for x8)
* @ecc_size: bytes for which ECC will be generated
*/
int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
{
unsigned int val;
/* check if ecc module is in used */
if (gpmc_ecc_used != -EINVAL)
return -EINVAL;
gpmc_ecc_used = cs;
/* clear ecc and enable bits */
val = ((0x00000001<<8) | 0x00000001);
gpmc_write_reg(GPMC_ECC_CONTROL, val);
/* program ecc and result sizes */
val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val);
switch (mode) {
case GPMC_ECC_READ:
gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
break;
case GPMC_ECC_READSYN:
gpmc_write_reg(GPMC_ECC_CONTROL, 0x100);
break;
case GPMC_ECC_WRITE:
gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
break;
default:
printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode);
break;
}
/* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */
val = (dev_width << 7) | (cs << 1) | (0x1);
gpmc_write_reg(GPMC_ECC_CONFIG, val);
return 0;
}
/**
* gpmc_calculate_ecc - generate non-inverted ecc bytes
* @cs: chip select number
* @dat: data pointer over which ecc is computed
* @ecc_code: ecc code buffer
*
* Using non-inverted ECC is considered ugly since writing a blank
* page (padding) will clear the ECC bytes. This is not a problem as long
* no one is trying to write data on the seemingly unused page. Reading
* an erased page will produce an ECC mismatch between generated and read
* ECC bytes that has to be dealt with separately.
*/
int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
{
unsigned int val = 0x0;
if (gpmc_ecc_used != cs)
return -EINVAL;
/* read ecc result */
val = gpmc_read_reg(GPMC_ECC1_RESULT);
*ecc_code++ = val; /* P128e, ..., P1e */
*ecc_code++ = val >> 16; /* P128o, ..., P1o */
/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
gpmc_ecc_used = -EINVAL;
return 0;
}

39
arch/arm/plat-omap/include/plat/gpmc.h
View File

@ -27,8 +27,27 @@
#define GPMC_CONFIG 0x50
#define GPMC_STATUS 0x54
#define GPMC_CS0_BASE 0x60
#define GPMC_CS_SIZE 0x30
/* Control Commands */
#define GPMC_CONFIG_RDY_BSY 0x00000001
#define GPMC_CONFIG_DEV_SIZE 0x00000002
#define GPMC_CONFIG_DEV_TYPE 0x00000003
#define GPMC_SET_IRQ_STATUS 0x00000004
#define GPMC_CONFIG_WP 0x00000005
#define GPMC_GET_IRQ_STATUS 0x00000006
#define GPMC_PREFETCH_FIFO_CNT 0x00000007 /* bytes available in FIFO for r/w */
#define GPMC_PREFETCH_COUNT 0x00000008 /* remaining bytes to be read/write*/
#define GPMC_STATUS_BUFFER 0x00000009 /* 1: buffer is available to write */
#define GPMC_NAND_COMMAND 0x0000000a
#define GPMC_NAND_ADDRESS 0x0000000b
#define GPMC_NAND_DATA 0x0000000c
/* ECC commands */
#define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */
#define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */
#define GPMC_ECC_READSYN 2 /* Reset before syndrom is read back */
#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
@ -56,6 +75,14 @@
#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3))
#define GPMC_CONFIG7_CSVALID (1 << 6)
#define GPMC_DEVICETYPE_NOR 0
#define GPMC_DEVICETYPE_NAND 2
#define GPMC_CONFIG_WRITEPROTECT 0x00000010
#define GPMC_STATUS_BUFF_EMPTY 0x00000001
#define WR_RD_PIN_MONITORING 0x00600000
#define GPMC_PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F)
#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
/*
* Note that all values in this struct are in nanoseconds, while
* the register values are in gpmc_fck cycles.
@ -108,10 +135,16 @@ extern int gpmc_cs_set_reserved(int cs, int reserved);
extern int gpmc_cs_reserved(int cs);
extern int gpmc_prefetch_enable(int cs, int dma_mode,
unsigned int u32_count, int is_write);
extern void gpmc_prefetch_reset(void);
extern int gpmc_prefetch_reset(int cs);
extern int gpmc_prefetch_status(void);
extern void omap3_gpmc_save_context(void);
extern void omap3_gpmc_restore_context(void);
extern void gpmc_init(void);
extern int gpmc_read_status(int cmd);
extern int gpmc_cs_configure(int cs, int cmd, int wval);
extern int gpmc_nand_read(int cs, int cmd);
extern int gpmc_nand_write(int cs, int cmd, int wval);
int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
#endif

4
drivers/mtd/nand/omap2.c
View File

@ -319,7 +319,7 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
} while (len);
/* disable and stop the PFPW engine */
gpmc_prefetch_reset();
gpmc_prefetch_reset(info->gpmc_cs);
}
}
@ -363,7 +363,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
}
/* disable and stop the PFPW engine */
gpmc_prefetch_reset();
gpmc_prefetch_reset(info->gpmc_cs);
}
}