redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

PCI: Fix typos and whitespace errors 

Fix various typos and whitespace errors:

  s/Synopsis/Synopsys/
  s/Designware/DesignWare/
  s/Keystine/Keystone/
  s/gpio/GPIO/
  s/pcie/PCIe/
  s/phy/PHY/
  s/confgiruation/configuration/

No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
hifive-unleashed-5.1
Bjorn Helgaas 2017-09-01 16:35:50 -05:00
parent cacf7eaf2a
commit 96291d5655
37 changed files with 99 additions and 103 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
CREDITS
View File

@ -2090,7 +2090,7 @@ S: Kuala Lumpur, Malaysia
N: Mohit Kumar
D: ST Microelectronics SPEAr13xx PCI host bridge driver
D: Synopsys Designware PCI host bridge driver
D: Synopsys DesignWare PCI host bridge driver
N: Gabor Kuti
E: seasons@falcon.sch.bme.hu

6
Documentation/devicetree/bindings/pci/83xx-512x-pci.txt
View File

@ -1,11 +1,11 @@
* Freescale 83xx and 512x PCI bridges
Freescale 83xx and 512x SOCs include the same pci bridge core.
Freescale 83xx and 512x SOCs include the same PCI bridge core.
83xx/512x specific notes:
- reg: should contain two address length tuples
The first is for the internal pci bridge registers
The second is for the pci config space access registers
The first is for the internal PCI bridge registers
The second is for the PCI config space access registers
Example (MPC8313ERDB)
pci0: pci@e0008500 {

18
Documentation/devicetree/bindings/pci/altera-pcie.txt
View File

@ -7,21 +7,21 @@ Required properties:
"Txs": TX slave port region
"Cra": Control register access region
- interrupt-parent: interrupt source phandle.
- interrupts: specifies the interrupt source of the parent interrupt controller.
The format of the interrupt specifier depends on the parent interrupt
controller.
- interrupts: specifies the interrupt source of the parent interrupt
controller. The format of the interrupt specifier depends
on the parent interrupt controller.
- device_type: must be "pci"
- #address-cells: set to <3>
- #size-cells: set to <2>
- #size-cells: set to <2>
- #interrupt-cells: set to <1>
- ranges: describes the translation of addresses for root ports and standard
PCI regions.
- ranges: describes the translation of addresses for root ports and
standard PCI regions.
- interrupt-map-mask and interrupt-map: standard PCI properties to define the
mapping of the PCIe interface to interrupt numbers.
Optional properties:
- msi-parent: Link to the hardware entity that serves as the MSI controller for this PCIe
controller.
- msi-parent: Link to the hardware entity that serves as the MSI controller
for this PCIe controller.
- bus-range: PCI bus numbers covered
Example
@ -45,5 +45,5 @@ Example
<0 0 0 3 &pcie_0 3>,
<0 0 0 4 &pcie_0 4>;
ranges = <0x82000000 0x00000000 0x00000000 0xc0000000 0x00000000 0x10000000
0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
0x82000000 0x00000000 0x10000000 0xd0000000 0x00000000 0x10000000>;
};

2
Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt
View File

@ -6,7 +6,7 @@ and thus inherits all the common properties defined in designware-pcie.txt.
Required properties:
- compatible: "axis,artpec6-pcie", "snps,dw-pcie"
- reg: base addresses and lengths of the PCIe controller (DBI),
the phy controller, and configuration address space.
the PHY controller, and configuration address space.
- reg-names: Must include the following entries:
- "dbi"
- "phy"

24
Documentation/devicetree/bindings/pci/designware-pcie.txt
View File

@ -1,4 +1,4 @@
* Synopsys Designware PCIe interface
* Synopsys DesignWare PCIe interface
Required properties:
- compatible: should contain "snps,dw-pcie" to identify the core.
@ -17,29 +17,27 @@ RC mode:
properties to define the mapping of the PCIe interface to interrupt
numbers.
EP mode:
- num-ib-windows: number of inbound address translation
windows
- num-ob-windows: number of outbound address translation
windows
- num-ib-windows: number of inbound address translation windows
- num-ob-windows: number of outbound address translation windows
Optional properties:
- num-lanes: number of lanes to use (this property should be specified unless
the link is brought already up in BIOS)
- reset-gpio: gpio pin number of power good signal
- reset-gpio: GPIO pin number of power good signal
- clocks: Must contain an entry for each entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- "pcie"
- "pcie_bus"
RC mode:
- num-viewport: number of view ports configured in
hardware. If a platform does not specify it, the driver assumes 2.
- bus-range: PCI bus numbers covered (it is recommended
for new devicetrees to specify this property, to keep backwards
compatibility a range of 0x00-0xff is assumed if not present)
- num-viewport: number of view ports configured in hardware. If a platform
does not specify it, the driver assumes 2.
- bus-range: PCI bus numbers covered (it is recommended for new devicetrees
to specify this property, to keep backwards compatibility a range of
0x00-0xff is assumed if not present)
EP mode:
- max-functions: maximum number of functions that can be
configured
- max-functions: maximum number of functions that can be configured
Example configuration:

2
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
View File

@ -1,6 +1,6 @@
* Freescale i.MX6 PCIe interface
This PCIe host controller is based on the Synopsis Designware PCIe IP
This PCIe host controller is based on the Synopsys DesignWare PCIe IP
and thus inherits all the common properties defined in designware-pcie.txt.
Required properties:

4
Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
View File

@ -1,7 +1,7 @@
HiSilicon Hip05 and Hip06 PCIe host bridge DT description
HiSilicon PCIe host controller is based on Designware PCI core.
It shares common functions with PCIe Designware core driver and inherits
HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core.
It shares common functions with the PCIe DesignWare core driver and inherits
common properties defined in
Documentation/devicetree/bindings/pci/designware-pci.txt.

8
Documentation/devicetree/bindings/pci/kirin-pcie.txt
View File

@ -1,8 +1,8 @@
HiSilicon Kirin SoCs PCIe host DT description
Kirin PCIe host controller is based on Designware PCI core.
It shares common functions with PCIe Designware core driver
and inherits common properties defined in
Kirin PCIe host controller is based on the Synopsys DesignWare PCI core.
It shares common functions with the PCIe DesignWare core driver and
inherits common properties defined in
Documentation/devicetree/bindings/pci/designware-pci.txt.
Additional properties are described here:
@ -16,7 +16,7 @@ Required properties
"apb": apb Ctrl register defined by Kirin;
"phy": apb PHY register defined by Kirin;
"config": PCIe configuration space registers.
- reset-gpios: The gpio to generate PCIe perst assert and deassert signal.
- reset-gpios: The GPIO to generate PCIe PERST# assert and deassert signal.
Optional properties:

2
Documentation/devicetree/bindings/pci/layerscape-pci.txt
View File

@ -16,7 +16,7 @@ Required properties:
"fsl,ls1021a-pcie", "snps,dw-pcie"
"fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"
"fsl,ls1046a-pcie"
- reg: base addresses and lengths of the PCIe controller
- reg: base addresses and lengths of the PCIe controller register blocks.
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
- interrupt-names: Must include the following entries:

2
Documentation/devicetree/bindings/pci/mvebu-pci.txt
View File

@ -77,7 +77,7 @@ and the following optional properties:
- marvell,pcie-lane: the physical PCIe lane number, for ports having
multiple lanes. If this property is not found, we assume that the
value is 0.
- reset-gpios: optional gpio to PERST#
- reset-gpios: optional GPIO to PERST#
- reset-delay-us: delay in us to wait after reset de-assertion, if not
specified will default to 100ms, as required by the PCIe specification.

2
Documentation/devicetree/bindings/pci/pci-armada8k.txt
View File

@ -1,6 +1,6 @@
* Marvell Armada 7K/8K PCIe interface
This PCIe host controller is based on the Synopsis Designware PCIe IP
This PCIe host controller is based on the Synopsys DesignWare PCIe IP
and thus inherits all the common properties defined in designware-pcie.txt.
Required properties:

15
Documentation/devicetree/bindings/pci/pci-keystone.txt
View File

@ -1,12 +1,12 @@
TI Keystone PCIe interface
Keystone PCI host Controller is based on Designware PCI h/w version 3.65.
It shares common functions with PCIe Designware core driver and inherit
common properties defined in
Keystone PCI host Controller is based on the Synopsys DesignWare PCI
hardware version 3.65. It shares common functions with the PCIe DesignWare
core driver and inherits common properties defined in
Documentation/devicetree/bindings/pci/designware-pci.txt
Please refer to Documentation/devicetree/bindings/pci/designware-pci.txt
for the details of Designware DT bindings. Additional properties are
for the details of DesignWare DT bindings. Additional properties are
described here as well as properties that are not applicable.
Required Properties:-
@ -52,13 +52,12 @@ pcie_intc: Interrupt controller device node for Legacy IRQ chip
};
Optional properties:-
phys: phandle to Generic Keystone SerDes phy for PCI
phy-names: name of the Generic Keystine SerDes phy for PCI
phys: phandle to generic Keystone SerDes PHY for PCI
phy-names: name of the generic Keystone SerDes PHY for PCI
- If boot loader already does PCI link establishment, then phys and
phy-names shouldn't be present.
interrupts: platform interrupt for error interrupts.
Designware DT Properties not applicable for Keystone PCI
DesignWare DT Properties not applicable for Keystone PCI
1. pcie_bus clock-names not used. Instead, a phandle to phys is used.

4
Documentation/devicetree/bindings/pci/qcom,pcie.txt
View File

@ -20,7 +20,7 @@
Value type: <stringlist>
Definition: Must include the following entries
- "parf" Qualcomm specific registers
- "dbi" Designware PCIe registers
- "dbi" DesignWare PCIe registers
- "elbi" External local bus interface registers
- "config" PCIe configuration space
@ -180,7 +180,7 @@
- <name>-gpios:
Usage: optional
Value type: <prop-encoded-array>
Definition: List of phandle and gpio specifier pairs. Should contain
Definition: List of phandle and GPIO specifier pairs. Should contain
- "perst-gpios" PCIe endpoint reset signal line
- "wake-gpios" PCIe endpoint wake signal line

2
Documentation/devicetree/bindings/pci/ralink,rt3883-pci.txt
View File

@ -71,7 +71,7 @@
- interrupt-map: standard PCI properties to define the mapping of the
PCI interface to interrupt numbers.
The PCI host bridge node migh have additional sub-nodes representing
The PCI host bridge node might have additional sub-nodes representing
the onboard PCI devices/PCI slots. Each such sub-node must have the
following mandatory properties:

7
Documentation/devicetree/bindings/pci/rcar-pci.txt
View File

@ -14,7 +14,7 @@ compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
SoC-specific version corresponding to the platform first
followed by the generic version.
- reg: base address and length of the pcie controller registers.
- reg: base address and length of the PCIe controller registers.
- #address-cells: set to <3>
- #size-cells: set to <2>
- bus-range: PCI bus numbers covered
@ -25,15 +25,14 @@ compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
source for hardware related interrupts (e.g. link speed change).
- #interrupt-cells: set to <1>
- interrupt-map-mask and interrupt-map: standard PCI properties
to define the mapping of the PCIe interface to interrupt
numbers.
to define the mapping of the PCIe interface to interrupt numbers.
- clocks: from common clock binding: clock specifiers for the PCIe controller
and PCIe bus clocks.
- clock-names: from common clock binding: should be "pcie" and "pcie_bus".
Example:
SoC specific DT Entry:
SoC-specific DT Entry:
pcie: pcie@fe000000 {
compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2";

2
Documentation/devicetree/bindings/pci/rockchip-pcie.txt
View File

@ -45,7 +45,7 @@ Required properties:
Optional Property:
- aspm-no-l0s: RC won't support ASPM L0s. This property is needed if
using 24MHz OSC for RC's PHY.
- ep-gpios: contain the entry for pre-reset gpio
- ep-gpios: contain the entry for pre-reset GPIO
- num-lanes: number of lanes to use
- vpcie3v3-supply: The phandle to the 3.3v regulator to use for PCIe.
- vpcie1v8-supply: The phandle to the 1.8v regulator to use for PCIe.

22
Documentation/devicetree/bindings/pci/samsung,exynos5440-pcie.txt
View File

@ -1,29 +1,29 @@
* Samsung Exynos 5440 PCIe interface
This PCIe host controller is based on the Synopsis Designware PCIe IP
This PCIe host controller is based on the Synopsys DesignWare PCIe IP
and thus inherits all the common properties defined in designware-pcie.txt.
Required properties:
- compatible: "samsung,exynos5440-pcie"
- reg: base addresses and lengths of the pcie controller,
the phy controller, additional register for the phy controller.
(Registers for the phy controller are DEPRECATED.
- reg: base addresses and lengths of the PCIe controller,
the PHY controller, additional register for the PHY controller.
(Registers for the PHY controller are DEPRECATED.
Use the PHY framework.)
- reg-names : First name should be set to "elbi".
And use the "config" instead of getting the confgiruation address space
And use the "config" instead of getting the configuration address space
from "ranges".
NOTE: When use the "config" property, reg-names must be set.
NOTE: When using the "config" property, reg-names must be set.
- interrupts: A list of interrupt outputs for level interrupt,
pulse interrupt, special interrupt.
- phys: From PHY binding. Phandle for the Generic PHY.
- phys: From PHY binding. Phandle for the generic PHY.
Refer to Documentation/devicetree/bindings/phy/samsung-phy.txt
Other common properties refer to
Documentation/devicetree/binding/pci/designware-pcie.txt
For other common properties, refer to
Documentation/devicetree/bindings/pci/designware-pcie.txt
Example:
SoC specific DT Entry:
SoC-specific DT Entry:
pcie@290000 {
compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
@ -83,7 +83,7 @@ With using PHY framework:
...
};
Board specific DT Entry:
Board-specific DT Entry:
pcie@290000 {
reset-gpio = <&pin_ctrl 5 0>;

6
Documentation/devicetree/bindings/pci/spear13xx-pcie.txt
View File

@ -1,12 +1,12 @@
SPEAr13XX PCIe DT detail:
================================
SPEAr13XX uses synopsis designware PCIe controller and ST MiPHY as phy
SPEAr13XX uses the Synopsys DesignWare PCIe controller and ST MiPHY as PHY
controller.
Required properties:
- compatible : should be "st,spear1340-pcie", "snps,dw-pcie".
- phys : phandle to phy node associated with pcie controller
- compatible : should be "st,spear1340-pcie", "snps,dw-pcie".
- phys : phandle to PHY node associated with PCIe controller
- phy-names : must be "pcie-phy"
- All other definitions as per generic PCI bindings

8
Documentation/devicetree/bindings/pci/ti-pci.txt
View File

@ -1,6 +1,6 @@
TI PCI Controllers
PCIe Designware Controller
PCIe DesignWare Controller
- compatible: Should be "ti,dra7-pcie" for RC
Should be "ti,dra7-pcie-ep" for EP
- phys : list of PHY specifiers (used by generic PHY framework)
@ -13,7 +13,7 @@ PCIe Designware Controller
HOST MODE
=========
- reg : Two register ranges as listed in the reg-names property
- reg-names : The first entry must be "ti-conf" for the TI specific registers
- reg-names : The first entry must be "ti-conf" for the TI-specific registers
The second entry must be "rc-dbics" for the DesignWare PCIe
registers
The third entry must be "config" for the PCIe configuration space
@ -30,7 +30,7 @@ HOST MODE
DEVICE MODE
===========
- reg : Four register ranges as listed in the reg-names property
- reg-names : "ti-conf" for the TI specific registers
- reg-names : "ti-conf" for the TI-specific registers
"ep_dbics" for the standard configuration registers as
they are locally accessed within the DIF CS space
"ep_dbics2" for the standard configuration registers as
@ -46,7 +46,7 @@ DEVICE MODE
access.
Optional Property:
- gpios : Should be added if a gpio line is required to drive PERST# line
- gpios : Should be added if a GPIO line is required to drive PERST# line
NOTE: Two DT nodes may be added for each PCI controller; one for host
mode and another for device mode. So in order for PCI to

2
Documentation/devicetree/bindings/pci/versatile.txt
View File

@ -5,7 +5,7 @@ PCI host controller found on the ARM Versatile PB board's FPGA.
Required properties:
- compatible: should contain "arm,versatile-pci" to identify the Versatile PCI
controller.
- reg: base addresses and lengths of the pci controller. There must be 3
- reg: base addresses and lengths of the PCI controller. There must be 3
entries:
- Versatile-specific registers
- Self Config space

5
Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
View File

@ -4,7 +4,7 @@ Required properties:
- compatible: should be "apm,xgene1-msi" to identify
X-Gene v1 PCIe MSI controller block.
- msi-controller: indicates that this is X-Gene v1 PCIe MSI controller node
- msi-controller: indicates that this is an X-Gene v1 PCIe MSI controller node
- reg: physical base address (0x79000000) and length (0x900000) for controller
registers. These registers include the MSI termination address and data
registers as well as the MSI interrupt status registers.
@ -13,7 +13,8 @@ Required properties:
interrupt number 0x10 to 0x1f.
- interrupt-names: not required
Each PCIe node needs to have property msi-parent that points to msi controller node
Each PCIe node needs to have property msi-parent that points to an MSI
controller node
Examples:

8
Documentation/devicetree/bindings/pci/xgene-pci.txt
View File

@ -8,7 +8,7 @@ Required properties:
property.
- reg-names: Must include the following entries:
"csr": controller configuration registers.
"cfg": pcie configuration space registers.
"cfg": PCIe configuration space registers.
- #address-cells: set to <3>
- #size-cells: set to <2>
- ranges: ranges for the outbound memory, I/O regions.
@ -21,11 +21,11 @@ Required properties:
Optional properties:
- status: Either "ok" or "disabled".
- dma-coherent: Present if dma operations are coherent
- dma-coherent: Present if DMA operations are coherent
Example:
SoC specific DT Entry:
SoC-specific DT Entry:
pcie0: pcie@1f2b0000 {
status = "disabled";
@ -51,7 +51,7 @@ SoC specific DT Entry:
};
Board specific DT Entry:
Board-specific DT Entry:
&pcie0 {
status = "ok";
};

7
Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
View File

@ -15,9 +15,9 @@ Required properties:
- device_type: must be "pci"
- interrupts: Should contain NWL PCIe interrupt
- interrupt-names: Must include the following entries:
"msi1, msi0": interrupt asserted when MSI is received
"msi1, msi0": interrupt asserted when an MSI is received
"intx": interrupt asserted when a legacy interrupt is received
"misc": interrupt asserted when miscellaneous is received
"misc": interrupt asserted when miscellaneous interrupt is received
- interrupt-map-mask and interrupt-map: standard PCI properties to define the
mapping of the PCI interface to interrupt numbers.
- ranges: ranges for the PCI memory regions (I/O space region is not
@ -26,7 +26,8 @@ Required properties:
detailed explanation
- msi-controller: indicates that this is MSI controller node
- msi-parent: MSI parent of the root complex itself
- legacy-interrupt-controller: Interrupt controller device node for Legacy interrupts
- legacy-interrupt-controller: Interrupt controller device node for Legacy
interrupts
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: should be set to 1
- #address-cells: specifies the number of cells needed to encode an

2
MAINTAINERS
View File

@ -10136,7 +10136,7 @@ L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
S: Maintained
F: drivers/pci/dwc/pci-exynos.c
PCI DRIVER FOR SYNOPSIS DESIGNWARE
PCI DRIVER FOR SYNOPSYS DESIGNWARE
M: Jingoo Han <jingoohan1@gmail.com>
M: Joao Pinto <Joao.Pinto@synopsys.com>
L: linux-pci@vger.kernel.org

12
drivers/pci/dwc/Kconfig
View File

@ -25,7 +25,7 @@ config PCI_DRA7XX
work either as EP or RC. In order to enable host-specific features
PCI_DRA7XX_HOST must be selected and in order to enable device-
specific features PCI_DRA7XX_EP must be selected. This uses
the Designware core.
the DesignWare core.
if PCI_DRA7XX
@ -97,8 +97,8 @@ config PCI_KEYSTONE
select PCIE_DW_HOST
help
Say Y here if you want to enable PCI controller support on Keystone
SoCs. The PCI controller on Keystone is based on Designware hardware
and therefore the driver re-uses the Designware core functions to
SoCs. The PCI controller on Keystone is based on DesignWare hardware
and therefore the driver re-uses the DesignWare core functions to
implement the driver.
config PCI_LAYERSCAPE
@ -132,7 +132,7 @@ config PCIE_QCOM
select PCIE_DW_HOST
help
Say Y here to enable PCIe controller support on Qualcomm SoCs. The
PCIe controller uses the Designware core plus Qualcomm-specific
PCIe controller uses the DesignWare core plus Qualcomm-specific
hardware wrappers.
config PCIE_ARMADA_8K
@ -145,8 +145,8 @@ config PCIE_ARMADA_8K
help
Say Y here if you want to enable PCIe controller support on
Armada-8K SoCs. The PCIe controller on Armada-8K is based on
Designware hardware and therefore the driver re-uses the
Designware core functions to implement the driver.
DesignWare hardware and therefore the driver re-uses the
DesignWare core functions to implement the driver.
config PCIE_ARTPEC6
bool "Axis ARTPEC-6 PCIe controller"

1
drivers/pci/dwc/pci-dra7xx.c
View File

@ -275,7 +275,6 @@ static irqreturn_t dra7xx_pcie_msi_irq_handler(int irq, void *arg)
return IRQ_HANDLED;
}
static irqreturn_t dra7xx_pcie_irq_handler(int irq, void *arg)
{
struct dra7xx_pcie *dra7xx = arg;

2
drivers/pci/dwc/pci-keystone-dw.c
View File

@ -1,5 +1,5 @@
/*
* Designware application register space functions for Keystone PCI controller
* DesignWare application register space functions for Keystone PCI controller
*
* Copyright (C) 2013-2014 Texas Instruments., Ltd.
* http://www.ti.com

2
drivers/pci/dwc/pcie-designware-ep.c
View File

@ -1,5 +1,5 @@
/**
* Synopsys Designware PCIe Endpoint controller driver
* Synopsys DesignWare PCIe Endpoint controller driver
*
* Copyright (C) 2017 Texas Instruments
* Author: Kishon Vijay Abraham I <kishon@ti.com>

2
drivers/pci/dwc/pcie-designware-host.c
View File

@ -1,5 +1,5 @@
/*
* Synopsys Designware PCIe host controller driver
* Synopsys DesignWare PCIe host controller driver
*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com

2
drivers/pci/dwc/pcie-designware.c
View File

@ -1,5 +1,5 @@
/*
* Synopsys Designware PCIe host controller driver
* Synopsys DesignWare PCIe host controller driver
*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com

2
drivers/pci/dwc/pcie-designware.h
View File

@ -1,5 +1,5 @@
/*
* Synopsys Designware PCIe host controller driver
* Synopsys DesignWare PCIe host controller driver
*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com

2
drivers/pci/host/pcie-rockchip.c
View File

@ -6,7 +6,7 @@
* Author: Shawn Lin <shawn.lin@rock-chips.com>
* Wenrui Li <wenrui.li@rock-chips.com>
*
* Bits taken from Synopsys Designware Host controller driver and
* Bits taken from Synopsys DesignWare Host controller driver and
* ARM PCI Host generic driver.
*
* This program is free software: you can redistribute it and/or modify

2
drivers/pci/host/pcie-xilinx.c
View File

@ -5,7 +5,7 @@
*
* Based on the Tegra PCIe driver
*
* Bits taken from Synopsys Designware Host controller driver and
* Bits taken from Synopsys DesignWare Host controller driver and
* ARM PCI Host generic driver.
*
* This program is free software: you can redistribute it and/or modify

4
drivers/pci/pcie/aer/aerdrv_core.c
View File

@ -5,10 +5,10 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* This file implements the core part of PCI-Express AER. When an pci-express
* This file implements the core part of PCIe AER. When a PCIe
* error is delivered, an error message will be collected and printed to
* console, then, an error recovery procedure will be executed by following
* the pci error recovery rules.
* the PCI error recovery rules.
*
* Copyright (C) 2006 Intel Corp.
* Tom Long Nguyen (tom.l.nguyen@intel.com)

2
drivers/pci/quirks.c
View File

@ -2061,7 +2061,7 @@ DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
/*
* The 82575 and 82598 may experience data corruption issues when transitioning
* out of L0S. To prevent this we need to disable L0S on the pci-e link
* out of L0S. To prevent this we need to disable L0S on the PCIe link.
*/
static void quirk_disable_aspm_l0s(struct pci_dev *dev)
{

5
include/linux/aer.h
View File

@ -39,7 +39,7 @@ struct aer_capability_regs {
};
#if defined(CONFIG_PCIEAER)
/* pci-e port driver needs this function to enable aer */
/* PCIe port driver needs this function to enable AER */
int pci_enable_pcie_error_reporting(struct pci_dev *dev);
int pci_disable_pcie_error_reporting(struct pci_dev *dev);
int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev);
@ -67,7 +67,6 @@ void cper_print_aer(struct pci_dev *dev, int aer_severity,
struct aer_capability_regs *aer);
int cper_severity_to_aer(int cper_severity);
void aer_recover_queue(int domain, unsigned int bus, unsigned int devfn,
int severity,
struct aer_capability_regs *aer_regs);
int severity, struct aer_capability_regs *aer_regs);
#endif //_AER_H_

2
include/linux/pcieport_if.h
View File

@ -38,7 +38,7 @@ static inline void set_service_data(struct pcie_device *dev, void *data)
dev->priv_data = data;
}
static inline void* get_service_data(struct pcie_device *dev)
static inline void *get_service_data(struct pcie_device *dev)
{
return dev->priv_data;
}