usb: hub: Cycle HUB power when initialization fails
Sometimes the USB device gets confused about the state of the initialization and the connection fails. In particular, the device thinks that it's already set up and running while the host thinks the device still needs to be configured. To work around this issue, power-cycle the hub's output to issue a sort of "reset" to the device. This makes the device restart its state machine and then the initialization succeeds. This fixes problems where the kernel reports a list of errors like this: usb 1-1.3: device not accepting address 19, error -71 The end result is a non-functioning device. After this patch, the sequence becomes like this: usb 1-1.3: new high-speed USB device number 18 using ci_hdrc usb 1-1.3: device not accepting address 18, error -71 usb 1-1.3: new high-speed USB device number 19 using ci_hdrc usb 1-1.3: device not accepting address 19, error -71 usb 1-1-port3: attempt power cycle usb 1-1.3: new high-speed USB device number 21 using ci_hdrc usb-storage 1-1.3:1.2: USB Mass Storage device detected Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
81cf4a4536
commit
973593a960
|
@ -4948,6 +4948,15 @@ loop:
|
|||
usb_put_dev(udev);
|
||||
if ((status == -ENOTCONN) || (status == -ENOTSUPP))
|
||||
break;
|
||||
|
||||
/* When halfway through our retry count, power-cycle the port */
|
||||
if (i == (SET_CONFIG_TRIES / 2) - 1) {
|
||||
dev_info(&port_dev->dev, "attempt power cycle\n");
|
||||
usb_hub_set_port_power(hdev, hub, port1, false);
|
||||
msleep(2 * hub_power_on_good_delay(hub));
|
||||
usb_hub_set_port_power(hdev, hub, port1, true);
|
||||
msleep(hub_power_on_good_delay(hub));
|
||||
}
|
||||
}
|
||||
if (hub->hdev->parent ||
|
||||
!hcd->driver->port_handed_over ||
|
||||
|
|
Loading…
Reference in a new issue