regulator: add support for MP8869 regulator
The MP8869 from Monolithic Power Systems is a single output DC/DC converter. The voltage can be controlled via I2C. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20200316223020.1a6d92ae@xhacker Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
2473115c47
commit
97be82880b
|
@ -635,6 +635,13 @@ config REGULATOR_MP8859
|
|||
Say M here if you want to include support for the regulator as a
|
||||
module. The module will be named "mp8859".
|
||||
|
||||
config REGULATOR_MP886X
|
||||
tristate "MPS MP8869 regulator driver"
|
||||
depends on I2C && (OF || COMPILE_TEST)
|
||||
select REGMAP_I2C
|
||||
help
|
||||
This driver supports the MP8869 voltage regulator.
|
||||
|
||||
config REGULATOR_MPQ7920
|
||||
tristate "Monolithic MPQ7920 PMIC"
|
||||
depends on I2C && OF
|
||||
|
|
|
@ -80,6 +80,7 @@ obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
|
|||
obj-$(CONFIG_REGULATOR_MCP16502) += mcp16502.o
|
||||
obj-$(CONFIG_REGULATOR_MP5416) += mp5416.o
|
||||
obj-$(CONFIG_REGULATOR_MP8859) += mp8859.o
|
||||
obj-$(CONFIG_REGULATOR_MP886X) += mp886x.o
|
||||
obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
|
||||
obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o
|
||||
|
|
230
drivers/regulator/mp886x.c
Normal file
230
drivers/regulator/mp886x.c
Normal file
|
@ -0,0 +1,230 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
//
|
||||
// MP8869 regulator driver
|
||||
//
|
||||
// Copyright (C) 2020 Synaptics Incorporated
|
||||
//
|
||||
// Author: Jisheng Zhang <jszhang@kernel.org>
|
||||
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/of_regulator.h>
|
||||
|
||||
#define MP886X_VSEL 0x00
|
||||
#define MP886X_V_BOOT (1 << 7)
|
||||
#define MP886X_SYSCNTLREG1 0x01
|
||||
#define MP886X_MODE (1 << 0)
|
||||
#define MP886X_GO (1 << 6)
|
||||
#define MP886X_EN (1 << 7)
|
||||
|
||||
struct mp886x_device_info {
|
||||
struct device *dev;
|
||||
struct regulator_desc desc;
|
||||
struct regulator_init_data *regulator;
|
||||
struct gpio_desc *en_gpio;
|
||||
u32 r[2];
|
||||
unsigned int sel;
|
||||
};
|
||||
|
||||
static int mp886x_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
||||
{
|
||||
switch (mode) {
|
||||
case REGULATOR_MODE_FAST:
|
||||
regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1,
|
||||
MP886X_MODE, MP886X_MODE);
|
||||
break;
|
||||
case REGULATOR_MODE_NORMAL:
|
||||
regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1,
|
||||
MP886X_MODE, 0);
|
||||
break;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static unsigned int mp886x_get_mode(struct regulator_dev *rdev)
|
||||
{
|
||||
u32 val;
|
||||
int ret;
|
||||
|
||||
ret = regmap_read(rdev->regmap, MP886X_SYSCNTLREG1, &val);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
if (val & MP886X_MODE)
|
||||
return REGULATOR_MODE_FAST;
|
||||
else
|
||||
return REGULATOR_MODE_NORMAL;
|
||||
}
|
||||
|
||||
static int mp8869_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel)
|
||||
{
|
||||
int ret;
|
||||
|
||||
ret = regmap_update_bits(rdev->regmap, MP886X_SYSCNTLREG1,
|
||||
MP886X_GO, MP886X_GO);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
sel <<= ffs(rdev->desc->vsel_mask) - 1;
|
||||
return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
|
||||
MP886X_V_BOOT | rdev->desc->vsel_mask, sel);
|
||||
}
|
||||
|
||||
static inline unsigned int mp8869_scale(unsigned int uv, u32 r1, u32 r2)
|
||||
{
|
||||
u32 tmp = uv * r1 / r2;
|
||||
|
||||
return uv + tmp;
|
||||
}
|
||||
|
||||
static int mp8869_get_voltage_sel(struct regulator_dev *rdev)
|
||||
{
|
||||
struct mp886x_device_info *di = rdev_get_drvdata(rdev);
|
||||
int ret, uv;
|
||||
unsigned int val;
|
||||
bool fbloop;
|
||||
|
||||
ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
fbloop = val & MP886X_V_BOOT;
|
||||
if (fbloop) {
|
||||
uv = rdev->desc->min_uV;
|
||||
uv = mp8869_scale(uv, di->r[0], di->r[1]);
|
||||
return regulator_map_voltage_linear(rdev, uv, uv);
|
||||
}
|
||||
|
||||
val &= rdev->desc->vsel_mask;
|
||||
val >>= ffs(rdev->desc->vsel_mask) - 1;
|
||||
|
||||
return val;
|
||||
}
|
||||
|
||||
static const struct regulator_ops mp8869_regulator_ops = {
|
||||
.set_voltage_sel = mp8869_set_voltage_sel,
|
||||
.get_voltage_sel = mp8869_get_voltage_sel,
|
||||
.set_voltage_time_sel = regulator_set_voltage_time_sel,
|
||||
.map_voltage = regulator_map_voltage_linear,
|
||||
.list_voltage = regulator_list_voltage_linear,
|
||||
.enable = regulator_enable_regmap,
|
||||
.disable = regulator_disable_regmap,
|
||||
.is_enabled = regulator_is_enabled_regmap,
|
||||
.set_mode = mp886x_set_mode,
|
||||
.get_mode = mp886x_get_mode,
|
||||
};
|
||||
|
||||
static int mp886x_regulator_register(struct mp886x_device_info *di,
|
||||
struct regulator_config *config)
|
||||
{
|
||||
struct regulator_desc *rdesc = &di->desc;
|
||||
struct regulator_dev *rdev;
|
||||
|
||||
rdesc->name = "mp886x-reg";
|
||||
rdesc->supply_name = "vin";
|
||||
rdesc->ops = of_device_get_match_data(di->dev);
|
||||
rdesc->type = REGULATOR_VOLTAGE;
|
||||
rdesc->n_voltages = 128;
|
||||
rdesc->enable_reg = MP886X_SYSCNTLREG1;
|
||||
rdesc->enable_mask = MP886X_EN;
|
||||
rdesc->min_uV = 600000;
|
||||
rdesc->uV_step = 10000;
|
||||
rdesc->vsel_reg = MP886X_VSEL;
|
||||
rdesc->vsel_mask = 0x3f;
|
||||
rdesc->owner = THIS_MODULE;
|
||||
|
||||
rdev = devm_regulator_register(di->dev, &di->desc, config);
|
||||
if (IS_ERR(rdev))
|
||||
return PTR_ERR(rdev);
|
||||
di->sel = rdesc->ops->get_voltage_sel(rdev);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct regmap_config mp886x_regmap_config = {
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
};
|
||||
|
||||
static int mp886x_i2c_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
struct device *dev = &client->dev;
|
||||
struct device_node *np = dev->of_node;
|
||||
struct mp886x_device_info *di;
|
||||
struct regulator_config config = { };
|
||||
struct regmap *regmap;
|
||||
int ret;
|
||||
|
||||
di = devm_kzalloc(dev, sizeof(struct mp886x_device_info), GFP_KERNEL);
|
||||
if (!di)
|
||||
return -ENOMEM;
|
||||
|
||||
di->regulator = of_get_regulator_init_data(dev, np, &di->desc);
|
||||
if (!di->regulator) {
|
||||
dev_err(dev, "Platform data not found!\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = of_property_read_u32_array(np, "mps,fb-voltage-divider",
|
||||
di->r, 2);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
di->en_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_HIGH);
|
||||
if (IS_ERR(di->en_gpio))
|
||||
return PTR_ERR(di->en_gpio);
|
||||
|
||||
di->dev = dev;
|
||||
|
||||
regmap = devm_regmap_init_i2c(client, &mp886x_regmap_config);
|
||||
if (IS_ERR(regmap)) {
|
||||
dev_err(dev, "Failed to allocate regmap!\n");
|
||||
return PTR_ERR(regmap);
|
||||
}
|
||||
i2c_set_clientdata(client, di);
|
||||
|
||||
config.dev = di->dev;
|
||||
config.init_data = di->regulator;
|
||||
config.regmap = regmap;
|
||||
config.driver_data = di;
|
||||
config.of_node = np;
|
||||
|
||||
ret = mp886x_regulator_register(di, &config);
|
||||
if (ret < 0)
|
||||
dev_err(dev, "Failed to register regulator!\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
static const struct of_device_id mp886x_dt_ids[] = {
|
||||
{
|
||||
.compatible = "mps,mp8869",
|
||||
.data = &mp8869_regulator_ops
|
||||
},
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, mp886x_dt_ids);
|
||||
|
||||
static const struct i2c_device_id mp886x_id[] = {
|
||||
{ "mp886x", },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, mp886x_id);
|
||||
|
||||
static struct i2c_driver mp886x_regulator_driver = {
|
||||
.driver = {
|
||||
.name = "mp886x-regulator",
|
||||
.of_match_table = of_match_ptr(mp886x_dt_ids),
|
||||
},
|
||||
.probe = mp886x_i2c_probe,
|
||||
.id_table = mp886x_id,
|
||||
};
|
||||
module_i2c_driver(mp886x_regulator_driver);
|
||||
|
||||
MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>");
|
||||
MODULE_DESCRIPTION("MP886x regulator driver");
|
||||
MODULE_LICENSE("GPL v2");
|
Loading…
Reference in a new issue