perf annotate: Use absolute addresses to calculate jump target offsets
These types of jumps were confusing the annotate browser: entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux Percent│ffffffff81a00020: swapgs <SNIP> │ffffffff81a00128: ↓ jae ffffffff81a00139 <syscall_return_via_sysret+0x53> <SNIP> │ffffffff81a00155: → jmpq *0x825d2d(%rip) # ffffffff82225e88 <pv_cpu_ops+0xe8> I.e. the syscall_return_via_sysret function is actually "inside" the entry_SYSCALL_64 function, and the offsets in jumps like these (+0x53) are relative to syscall_return_via_sysret, not to syscall_return_via_sysret. Or this may be some artifact in how the assembler marks the start and end of a function and how this ends up in the ELF symtab for vmlinux, i.e. syscall_return_via_sysret() isn't "inside" entry_SYSCALL_64, but just right after it. From readelf -sw vmlinux: 80267: ffffffff81a00020 315 NOTYPE GLOBAL DEFAULT 1 entry_SYSCALL_64 316: ffffffff81a000e6 0 NOTYPE LOCAL DEFAULT 1 syscall_return_via_sysret 0xffffffff81a00020 + 315 > 0xffffffff81a000e6 So instead of looking for offsets after that last '+' sign, calculate offsets for jump target addresses that are inside the function being disassembled from the absolute address, 0xffffffff81a00139 in this case, subtracting from it the objdump address for the start of the function being disassembled, entry_SYSCALL_64() in this case. So, before this patch: entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux Percent│ pop %r10 │ pop %r9 │ pop %r8 │ pop %rax │ pop %rsi │ pop %rdx │ pop %rsi │ mov %rsp,%rdi │ mov %gs:0x5004,%rsp │ pushq 0x28(%rdi) │ pushq (%rdi) │ push %rax │ ↑ jmp 6c │ mov %cr3,%rdi │ ↑ jmp 62 │ mov %rdi,%rax │ and $0x7ff,%rdi │ bt %rdi,%gs:0x2219a │ ↑ jae 53 │ btr %rdi,%gs:0x2219a │ mov %rax,%rdi │ ↑ jmp 5b After: entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux 0.65 │ → jne swapgs_restore_regs_and_return_to_usermode │ pop %r10 │ pop %r9 │ pop %r8 │ pop %rax │ pop %rsi │ pop %rdx │ pop %rsi │ mov %rsp,%rdi │ mov %gs:0x5004,%rsp │ pushq 0x28(%rdi) │ pushq (%rdi) │ push %rax │ ↓ jmp 132 │ mov %cr3,%rdi │ ┌──jmp 128 │ │ mov %rdi,%rax │ │ and $0x7ff,%rdi │ │ bt %rdi,%gs:0x2219a │ │↓ jae 119 │ │ btr %rdi,%gs:0x2219a │ │ mov %rax,%rdi │ │↓ jmp 121 │119:│ mov %rax,%rdi │ │ bts $0x3f,%rdi │121:│ or $0x800,%rdi │128:└─→or $0x1000,%rdi │ mov %rdi,%cr3 │132: pop %rax │ pop %rdi │ pop %rsp │ → jmpq *0x825d2d(%rip) # ffffffff82225e88 <pv_cpu_ops+0xe8> With those at least navigating to the right destination, an improvement for these cases seems to be to be to somehow mark those inner functions, which in this case could be: entry_SYSCALL_64 /lib/modules/4.16.0-rc5-00086-gdf09348f78dc/build/vmlinux │syscall_return_via_sysret: │ pop %r15 │ pop %r14 │ pop %r13 │ pop %r12 │ pop %rbp │ pop %rbx │ pop %rsi │ pop %r10 │ pop %r9 │ pop %r8 │ pop %rax │ pop %rsi │ pop %rdx │ pop %rsi │ mov %rsp,%rdi │ mov %gs:0x5004,%rsp │ pushq 0x28(%rdi) │ pushq (%rdi) │ push %rax │ ↓ jmp 132 │ mov %cr3,%rdi │ ┌──jmp 128 │ │ mov %rdi,%rax │ │ and $0x7ff,%rdi │ │ bt %rdi,%gs:0x2219a │ │↓ jae 119 │ │ btr %rdi,%gs:0x2219a │ │ mov %rax,%rdi │ │↓ jmp 121 │119:│ mov %rax,%rdi │ │ bts $0x3f,%rdi │121:│ or $0x800,%rdi │128:└─→or $0x1000,%rdi │ mov %rdi,%cr3 │132: pop %rax │ pop %rdi │ pop %rsp │ → jmpq *0x825d2d(%rip) # ffffffff82225e88 <pv_cpu_ops+0xe8> This all gets much better viewed if one uses 'perf report --ignore-vmlinux' forcing the usage of /proc/kcore + /proc/kallsyms, when the above actually gets down to: # perf report --ignore-vmlinux ## do '/64', will show the function names containing '64', ## navigate to /entry_SYSCALL_64_after_hwframe.annotation, ## press 'A' to annotate, then 'P' to print that annotation ## to a file ## From another xterm (or see on screen, this 'P' thing is for ## getting rid of those right side scroll bars/spaces): # cat /entry_SYSCALL_64_after_hwframe.annotation entry_SYSCALL_64_after_hwframe() /proc/kcore Event: cycles:ppp Percent Disassembly of section load0: ffffffff9aa00044 <load0>: 11.97 push %rax 4.85 push %rdi push %rsi 2.59 push %rdx 2.27 push %rcx 0.32 pushq $0xffffffffffffffda 1.29 push %r8 xor %r8d,%r8d 1.62 push %r9 0.65 xor %r9d,%r9d 1.62 push %r10 xor %r10d,%r10d 5.50 push %r11 xor %r11d,%r11d 3.56 push %rbx xor %ebx,%ebx 4.21 push %rbp xor %ebp,%ebp 2.59 push %r12 0.97 xor %r12d,%r12d 3.24 push %r13 xor %r13d,%r13d 2.27 push %r14 xor %r14d,%r14d 4.21 push %r15 xor %r15d,%r15d 0.97 mov %rsp,%rdi 5.50 → callq do_syscall_64 14.56 mov 0x58(%rsp),%rcx 7.44 mov 0x80(%rsp),%r11 0.32 cmp %rcx,%r11 → jne swapgs_restore_regs_and_return_to_usermode 0.32 shl $0x10,%rcx 0.32 sar $0x10,%rcx 3.24 cmp %rcx,%r11 → jne swapgs_restore_regs_and_return_to_usermode 2.27 cmpq $0x33,0x88(%rsp) 1.29 → jne swapgs_restore_regs_and_return_to_usermode mov 0x30(%rsp),%r11 8.74 cmp %r11,0x90(%rsp) → jne swapgs_restore_regs_and_return_to_usermode 0.32 test $0x10100,%r11 → jne swapgs_restore_regs_and_return_to_usermode 0.32 cmpq $0x2b,0xa0(%rsp) 0.65 → jne swapgs_restore_regs_and_return_to_usermode I.e. using kallsyms makes the function start/end be done differently than using what is in the vmlinux ELF symtab and actually the hits goes to entry_SYSCALL_64_after_hwframe, which is a GLOBAL() after the start of entry_SYSCALL_64: ENTRY(entry_SYSCALL_64) UNWIND_HINT_EMPTY <SNIP> pushq $__USER_CS /* pt_regs->cs */ pushq %rcx /* pt_regs->ip */ GLOBAL(entry_SYSCALL_64_after_hwframe) pushq %rax /* pt_regs->orig_ax */ PUSH_AND_CLEAR_REGS rax=$-ENOSYS And it goes and ends at: cmpq $__USER_DS, SS(%rsp) /* SS must match SYSRET */ jne swapgs_restore_regs_and_return_to_usermode /* * We win! This label is here just for ease of understanding * perf profiles. Nothing jumps here. */ syscall_return_via_sysret: /* rcx and r11 are already restored (see code above) */ UNWIND_HINT_EMPTY POP_REGS pop_rdi=0 skip_r11rcx=1 So perhaps some people should really just play with '--ignore-vmlinux' to force /proc/kcore + kallsyms. One idea is to do both, i.e. have a vmlinux annotation and a kcore+kallsyms one, when possible, and even show the patched location, etc. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-r11knxv8voesav31xokjiuo6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This commit is contained in:
parent
c448234cfe
commit
980b68ec06
|
@ -280,7 +280,6 @@ static int jump__parse(struct arch *arch __maybe_unused, struct ins_operands *op
|
|||
struct addr_map_symbol target = {
|
||||
.map = map,
|
||||
};
|
||||
const char *s = strchr(ops->raw, '+');
|
||||
const char *c = strchr(ops->raw, ',');
|
||||
u64 start, end;
|
||||
/*
|
||||
|
@ -337,8 +336,8 @@ static int jump__parse(struct arch *arch __maybe_unused, struct ins_operands *op
|
|||
map__rip_2objdump(target.map, map->map_ip(target.map, target.addr)) == ops->target.addr)
|
||||
ops->target.sym = target.sym;
|
||||
|
||||
if (s++ != NULL) {
|
||||
ops->target.offset = strtoull(s, NULL, 16);
|
||||
if (!ops->target.outside) {
|
||||
ops->target.offset = target.addr - start;
|
||||
ops->target.offset_avail = true;
|
||||
} else {
|
||||
ops->target.offset_avail = false;
|
||||
|
|
Loading…
Reference in a new issue