redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

[ARM] 2888/1: OMAP 3/4: Update omap include files, take 2 

Patch from Tony Lindgren

This patch syncs the mainline kernel with linux-omap tree.
The highlights of the patch are:
- Start adding 24xx support by Paul Mundt
- Clean-up of cpu detection by Dirk Behme and Tony Lindgren
- Add DSP header by Toshihiro Kobayashi
- Add support for mtd-xip by Vladimir Barinov
- Add various new mux registers
- Move OMAP specific serial defines back to serial.h

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
hifive-unleashed-5.1
Tony Lindgren 2005-09-07 17:20:27 +01:00 committed by Russell King
parent 92105bb706
commit 9839c6b8dd
26 changed files with 771 additions and 242 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
include/asm-arm/arch-omap/board-h4.h
View File

@ -30,6 +30,9 @@
#define __ASM_ARCH_OMAP_H4_H
/* Placeholder for H4 specific defines */
/* GPMC CS1 */
#define OMAP24XX_ETHR_START 0x08000300
#define OMAP24XX_ETHR_GPIO_IRQ 92
#endif /* __ASM_ARCH_OMAP_H4_H */

25
include/asm-arm/arch-omap/board-innovator.h
View File

@ -36,31 +36,6 @@
#define OMAP1510P1_EMIFS_PRI_VALUE 0x00
#define OMAP1510P1_EMIFF_PRI_VALUE 0x00
/*
* These definitions define an area of FLASH set aside
* for the use of MTD/JFFS2. This is the area of flash
* that a JFFS2 filesystem will reside which is mounted
* at boot with the "root=/dev/mtdblock/0 rw"
* command line option. The flash address used here must
* fall within the legal range defined by rrload for storing
* the filesystem component. This address will be sufficiently
* deep into the overall flash range to avoid the other
* components also stored in flash such as the bootloader,
* the bootloader params, and the kernel.
* The SW2 settings for the map below are:
* 1 off, 2 off, 3 on, 4 off.
*/
/* Intel flash_0, partitioned as expected by rrload */
#define OMAP_FLASH_0_BASE 0xD8000000
#define OMAP_FLASH_0_START 0x00000000
#define OMAP_FLASH_0_SIZE SZ_16M
/* Intel flash_1, used for cramfs or other flash file systems */
#define OMAP_FLASH_1_BASE 0xD9000000
#define OMAP_FLASH_1_START 0x01000000
#define OMAP_FLASH_1_SIZE SZ_16M
#define NR_FPGA_IRQS 24
#define NR_IRQS IH_BOARD_BASE + NR_FPGA_IRQS

17
include/asm-arm/arch-omap/board-perseus2.h
View File

@ -36,23 +36,14 @@
#define OMAP_SDRAM_DEVICE D256M_1X16_4B
#endif
/*
* These definitions define an area of FLASH set aside
* for the use of MTD/JFFS2. This is the area of flash
* that a JFFS2 filesystem will reside which is mounted
* at boot with the "root=/dev/mtdblock/0 rw"
* command line option.
*/
/* Intel flash_0, partitioned as expected by rrload */
#define OMAP_FLASH_0_BASE 0xD8000000 /* VA */
#define OMAP_FLASH_0_START 0x00000000 /* PA */
#define OMAP_FLASH_0_SIZE SZ_32M
#define MAXIRQNUM IH_BOARD_BASE
#define MAXFIQNUM MAXIRQNUM
#define MAXSWINUM MAXIRQNUM
#define NR_IRQS (MAXIRQNUM + 1)
/* Samsung NAND flash at CS2B or CS3(NAND Boot) */
#define OMAP_NAND_FLASH_START1 0x0A000000 /* CS2B */
#define OMAP_NAND_FLASH_START2 0x0C000000 /* CS3 */
#endif

5
include/asm-arm/arch-omap/board-voiceblue.h
View File

@ -11,11 +11,6 @@
#ifndef __ASM_ARCH_VOICEBLUE_H
#define __ASM_ARCH_VOICEBLUE_H
#if (EXTERNAL_MAX_NR_PORTS < 4)
#undef EXTERNAL_MAX_NR_PORTS
#define EXTERNAL_MAX_NR_PORTS 4
#endif
extern void voiceblue_wdt_enable(void);
extern void voiceblue_wdt_disable(void);
extern void voiceblue_wdt_ping(void);

19
include/asm-arm/arch-omap/board.h
View File

@ -30,10 +30,23 @@ struct omap_clock_config {
u8 system_clock_type;
};
struct omap_mmc_conf {
unsigned enabled:1;
/* nomux means "standard" muxing is wrong on this board, and that
* board-specific code handled it before common init logic.
*/
unsigned nomux:1;
/* switch pin can be for card detect (default) or card cover */
unsigned cover:1;
/* 4 wire signaling is optional, and is only used for SD/SDIO */
unsigned wire4:1;
s16 power_pin;
s16 switch_pin;
s16 wp_pin;
};
struct omap_mmc_config {
u8 mmc_blocks;
s16 mmc1_power_pin, mmc2_power_pin;
s16 mmc1_switch_pin, mmc2_switch_pin;
struct omap_mmc_conf mmc[2];
};
struct omap_serial_console_config {

195
include/asm-arm/arch-omap/cpu.h
View File

@ -38,146 +38,179 @@ extern unsigned int system_rev;
/*
* Test if multicore OMAP support is needed
*/
#undef MULTI_OMAP
#undef MULTI_OMAP1
#undef MULTI_OMAP2
#undef OMAP_NAME
#ifdef CONFIG_ARCH_OMAP730
# ifdef OMAP_NAME
# undef MULTI_OMAP
# define MULTI_OMAP
# undef MULTI_OMAP1
# define MULTI_OMAP1
# else
# define OMAP_NAME omap730
# endif
#endif
#ifdef CONFIG_ARCH_OMAP1510
# ifdef OMAP_NAME
# undef MULTI_OMAP
# define MULTI_OMAP
# undef MULTI_OMAP1
# define MULTI_OMAP1
# else
# define OMAP_NAME omap1510
# endif
#endif
#ifdef CONFIG_ARCH_OMAP16XX
# ifdef OMAP_NAME
# undef MULTI_OMAP
# define MULTI_OMAP
# undef MULTI_OMAP1
# define MULTI_OMAP1
# else
# define OMAP_NAME omap1610
# define OMAP_NAME omap16xx
# endif
#endif
#ifdef CONFIG_ARCH_OMAP16XX
# ifdef OMAP_NAME
# undef MULTI_OMAP
# define MULTI_OMAP
#ifdef CONFIG_ARCH_OMAP24XX
# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
# error "OMAP1 and OMAP2 can't be selected at the same time"
# else
# define OMAP_NAME omap1710
# undef MULTI_OMAP2
# define OMAP_NAME omap24xx
# endif
#endif
/*
* Generate various OMAP cpu specific macros, and cpu class
* specific macros
* Macros to group OMAP into cpu classes.
* These can be used in most places.
* cpu_is_omap7xx(): True for OMAP730
* cpu_is_omap15xx(): True for OMAP1510 and OMAP5910
* cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710
* cpu_is_omap24xx(): True for OMAP2420
*/
#define GET_OMAP_TYPE ((system_rev >> 24) & 0xff)
#define GET_OMAP_CLASS (system_rev & 0xff)
#define IS_OMAP_TYPE(type, id) \
static inline int is_omap ##type (void) \
{ \
return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
}
#define IS_OMAP_CLASS(class, id) \
static inline int is_omap ##class (void) \
{ \
return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
}
IS_OMAP_TYPE(730, 0x07)
IS_OMAP_TYPE(1510, 0x15)
IS_OMAP_TYPE(1610, 0x16)
IS_OMAP_TYPE(5912, 0x16)
IS_OMAP_TYPE(1710, 0x17)
IS_OMAP_TYPE(2420, 0x24)
IS_OMAP_CLASS(7xx, 0x07)
IS_OMAP_CLASS(15xx, 0x15)
IS_OMAP_CLASS(16xx, 0x16)
IS_OMAP_CLASS(24xx, 0x24)
/*
* Macros to group OMAP types into cpu classes.
* These can be used in most places.
* cpu_is_omap15xx(): True for 1510 and 5910
* cpu_is_omap16xx(): True for 1610, 5912 and 1710
*/
#if defined(MULTI_OMAP)
# define cpu_is_omap7xx() is_omap7xx()
# define cpu_is_omap15xx() is_omap15xx()
# if !(defined(CONFIG_ARCH_OMAP1510) || defined(CONFIG_ARCH_OMAP730))
# define cpu_is_omap16xx() 1
# else
#define cpu_is_omap7xx() 0
#define cpu_is_omap15xx() 0
#define cpu_is_omap16xx() 0
#define cpu_is_omap24xx() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() is_omap7xx()
# endif
# if defined(CONFIG_ARCH_OMAP1510)
# undef cpu_is_omap15xx
# define cpu_is_omap15xx() is_omap15xx()
# endif
# if defined(CONFIG_ARCH_OMAP16XX)
# undef cpu_is_omap16xx
# define cpu_is_omap16xx() is_omap16xx()
# endif
#else
# if defined(CONFIG_ARCH_OMAP730)
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() 1
# else
# define cpu_is_omap7xx() 0
# endif
# if defined(CONFIG_ARCH_OMAP1510)
# undef cpu_is_omap15xx
# define cpu_is_omap15xx() 1
# else
# define cpu_is_omap15xx() 0
# endif
# if defined(CONFIG_ARCH_OMAP16XX)
# undef cpu_is_omap16xx
# define cpu_is_omap16xx() 1
# else
# define cpu_is_omap16xx() 0
# endif
# if defined(CONFIG_ARCH_OMAP24XX)
# undef cpu_is_omap24xx
# define cpu_is_omap24xx() 1
# endif
#endif
#if defined(MULTI_OMAP)
# define cpu_is_omap730() is_omap730()
# define cpu_is_omap1510() is_omap1510()
# define cpu_is_omap1610() is_omap1610()
# define cpu_is_omap5912() is_omap5912()
# define cpu_is_omap1710() is_omap1710()
/*
* Macros to detect individual cpu types.
* These are only rarely needed.
* cpu_is_omap730(): True for OMAP730
* cpu_is_omap1510(): True for OMAP1510
* cpu_is_omap1610(): True for OMAP1610
* cpu_is_omap1611(): True for OMAP1611
* cpu_is_omap5912(): True for OMAP5912
* cpu_is_omap1621(): True for OMAP1621
* cpu_is_omap1710(): True for OMAP1710
* cpu_is_omap2420(): True for OMAP2420
*/
#define GET_OMAP_TYPE ((system_rev >> 16) & 0xffff)
#define IS_OMAP_TYPE(type, id) \
static inline int is_omap ##type (void) \
{ \
return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
}
IS_OMAP_TYPE(730, 0x0730)
IS_OMAP_TYPE(1510, 0x1510)
IS_OMAP_TYPE(1610, 0x1610)
IS_OMAP_TYPE(1611, 0x1611)
IS_OMAP_TYPE(5912, 0x1611)
IS_OMAP_TYPE(1621, 0x1621)
IS_OMAP_TYPE(1710, 0x1710)
IS_OMAP_TYPE(2420, 0x2420)
#define cpu_is_omap730() 0
#define cpu_is_omap1510() 0
#define cpu_is_omap1610() 0
#define cpu_is_omap5912() 0
#define cpu_is_omap1611() 0
#define cpu_is_omap1621() 0
#define cpu_is_omap1710() 0
#define cpu_is_omap2420() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
# undef cpu_is_omap730
# define cpu_is_omap730() is_omap730()
# endif
# if defined(CONFIG_ARCH_OMAP1510)
# undef cpu_is_omap1510
# define cpu_is_omap1510() is_omap1510()
# endif
#else
# if defined(CONFIG_ARCH_OMAP730)
# undef cpu_is_omap730
# define cpu_is_omap730() 1
# else
# define cpu_is_omap730() 0
# endif
# if defined(CONFIG_ARCH_OMAP1510)
# undef cpu_is_omap1510
# define cpu_is_omap1510() 1
# else
# define cpu_is_omap1510() 0
# endif
# if defined(CONFIG_ARCH_OMAP16XX)
# define cpu_is_omap1610() 1
# else
# define cpu_is_omap1610() 0
# endif
# if defined(CONFIG_ARCH_OMAP16XX)
# define cpu_is_omap5912() 1
# else
# define cpu_is_omap5912() 0
# endif
# if defined(CONFIG_ARCH_OMAP16XX)
# define cpu_is_omap1610() is_omap1610()
# define cpu_is_omap5912() is_omap5912()
# define cpu_is_omap1710() is_omap1710()
# else
# define cpu_is_omap1610() 0
# define cpu_is_omap5912() 0
# define cpu_is_omap1710() 0
# endif
# if defined(CONFIG_ARCH_OMAP2420)
# define cpu_is_omap2420() 1
# else
# define cpu_is_omap2420() 0
# endif
#endif
/*
* Whether we have MULTI_OMAP1 or not, we still need to distinguish
* between 1611B/5912 and 1710.
*/
#if defined(CONFIG_ARCH_OMAP16XX)
# undef cpu_is_omap1610
# undef cpu_is_omap1611
# undef cpu_is_omap5912
# undef cpu_is_omap1621
# undef cpu_is_omap1710
# define cpu_is_omap1610() is_omap1610()
# define cpu_is_omap1611() is_omap1611()
# define cpu_is_omap5912() is_omap5912()
# define cpu_is_omap1621() is_omap1621()
# define cpu_is_omap1710() is_omap1710()
#endif
#if defined(CONFIG_ARCH_OMAP2420)
# undef cpu_is_omap2420
# define cpu_is_omap2420() 1
#endif
#endif

13
include/asm-arm/arch-omap/debug-macro.S
View File

@ -14,6 +14,7 @@
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
#ifdef CONFIG_ARCH_OMAP1
moveq \rx, #0xff000000 @ physical base address
movne \rx, #0xfe000000 @ virtual base
orr \rx, \rx, #0x00fb0000
@ -22,6 +23,18 @@
#endif
#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
orr \rx, \rx, #0x00000800 @ UART 2 & 3
#endif
#elif CONFIG_ARCH_OMAP2
moveq \rx, #0x48000000 @ physical base address
movne \rx, #0xd8000000 @ virtual base
orr \rx, \rx, #0x0006a000
#ifdef CONFIG_OMAP_LL_DEBUG_UART2
add \rx, \rx, #0x00002000 @ UART 2
#endif
#ifdef CONFIG_OMAP_LL_DEBUG_UART3
add \rx, \rx, #0x00004000 @ UART 3
#endif
#endif
.endm

1
include/asm-arm/arch-omap/dma.h
View File

@ -240,6 +240,7 @@ extern void omap_dma_unlink_lch (int lch_head, int lch_queue);
extern dma_addr_t omap_get_dma_src_pos(int lch);
extern dma_addr_t omap_get_dma_dst_pos(int lch);
extern int omap_get_dma_src_addr_counter(int lch);
extern void omap_clear_dma(int lch);
extern int omap_dma_running(void);

92
include/asm-arm/arch-omap/dmtimer.h 100644
View File

@ -0,0 +1,92 @@
/*
* linux/include/asm-arm/arm/arch-omap/dmtimer.h
*
* OMAP Dual-Mode Timers
*
* Copyright (C) 2005 Nokia Corporation
* Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __ASM_ARCH_TIMER_H
#define __ASM_ARCH_TIMER_H
#include <linux/list.h>
#define OMAP_TIMER_SRC_ARMXOR 0x00
#define OMAP_TIMER_SRC_32_KHZ 0x01
#define OMAP_TIMER_SRC_EXT_CLK 0x02
/* timer control reg bits */
#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13)
#define OMAP_TIMER_CTRL_PT (1 << 12)
#define OMAP_TIMER_CTRL_TRG_OVERFLOW (0x1 << 10)
#define OMAP_TIMER_CTRL_TRG_OFANDMATCH (0x2 << 10)
#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8)
#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8)
#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8)
#define OMAP_TIMER_CTRL_SCPWM (1 << 7)
#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */
#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */
#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* how much to shift the prescaler value */
#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */
#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */
/* timer interrupt enable bits */
#define OMAP_TIMER_INT_CAPTURE (1 << 2)
#define OMAP_TIMER_INT_OVERFLOW (1 << 1)
#define OMAP_TIMER_INT_MATCH (1 << 0)
struct omap_dm_timer {
struct list_head timer_list;
u32 base;
unsigned int irq;
};
u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, int reg);
void omap_dm_timer_write_reg(struct omap_dm_timer *timer, int reg, u32 value);
struct omap_dm_timer * omap_dm_timer_request(void);
void omap_dm_timer_free(struct omap_dm_timer *timer);
void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value);
void omap_dm_timer_set_trigger(struct omap_dm_timer *timer, unsigned int value);
void omap_dm_timer_enable_compare(struct omap_dm_timer *timer);
void omap_dm_timer_enable_autoreload(struct omap_dm_timer *timer);
void omap_dm_timer_trigger(struct omap_dm_timer *timer);
void omap_dm_timer_start(struct omap_dm_timer *timer);
void omap_dm_timer_stop(struct omap_dm_timer *timer);
void omap_dm_timer_set_load(struct omap_dm_timer *timer, unsigned int load);
void omap_dm_timer_set_match(struct omap_dm_timer *timer, unsigned int match);
unsigned int omap_dm_timer_read_status(struct omap_dm_timer *timer);
void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value);
unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer);
void omap_dm_timer_reset_counter(struct omap_dm_timer *timer);
int omap_dm_timers_active(void);
#endif /* __ASM_ARCH_TIMER_H */

244
include/asm-arm/arch-omap/dsp.h 100644
View File

@ -0,0 +1,244 @@
/*
* linux/include/asm-arm/arch-omap/dsp.h
*
* Header for OMAP DSP driver
*
* Copyright (C) 2002-2005 Nokia Corporation
*
* Written by Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* 2005/06/01: DSP Gateway version 3.3
*/
#ifndef ASM_ARCH_DSP_H
#define ASM_ARCH_DSP_H
/*
* for /dev/dspctl/ctl
*/
#define OMAP_DSP_IOCTL_RESET 1
#define OMAP_DSP_IOCTL_RUN 2
#define OMAP_DSP_IOCTL_SETRSTVECT 3
#define OMAP_DSP_IOCTL_CPU_IDLE 4
#define OMAP_DSP_IOCTL_MPUI_WORDSWAP_ON 5
#define OMAP_DSP_IOCTL_MPUI_WORDSWAP_OFF 6
#define OMAP_DSP_IOCTL_MPUI_BYTESWAP_ON 7
#define OMAP_DSP_IOCTL_MPUI_BYTESWAP_OFF 8
#define OMAP_DSP_IOCTL_GBL_IDLE 9
#define OMAP_DSP_IOCTL_DSPCFG 10
#define OMAP_DSP_IOCTL_DSPUNCFG 11
#define OMAP_DSP_IOCTL_TASKCNT 12
#define OMAP_DSP_IOCTL_POLL 13
#define OMAP_DSP_IOCTL_REGMEMR 40
#define OMAP_DSP_IOCTL_REGMEMW 41
#define OMAP_DSP_IOCTL_REGIOR 42
#define OMAP_DSP_IOCTL_REGIOW 43
#define OMAP_DSP_IOCTL_GETVAR 44
#define OMAP_DSP_IOCTL_SETVAR 45
#define OMAP_DSP_IOCTL_RUNLEVEL 50
#define OMAP_DSP_IOCTL_SUSPEND 51
#define OMAP_DSP_IOCTL_RESUME 52
#define OMAP_DSP_IOCTL_FBEN 53
#define OMAP_DSP_IOCTL_FBDIS 54
#define OMAP_DSP_IOCTL_MBSEND 99
/*
* for taskdev
* (ioctls below should be >= 0x10000)
*/
#define OMAP_DSP_TASK_IOCTL_BFLSH 0x10000
#define OMAP_DSP_TASK_IOCTL_SETBSZ 0x10001
#define OMAP_DSP_TASK_IOCTL_LOCK 0x10002
#define OMAP_DSP_TASK_IOCTL_UNLOCK 0x10003
#define OMAP_DSP_TASK_IOCTL_GETNAME 0x10004
/*
* for /dev/dspctl/mem
*/
#define OMAP_DSP_MEM_IOCTL_EXMAP 1
#define OMAP_DSP_MEM_IOCTL_EXUNMAP 2
#define OMAP_DSP_MEM_IOCTL_EXMAP_FLUSH 3
#define OMAP_DSP_MEM_IOCTL_FBEXPORT 5
#define OMAP_DSP_MEM_IOCTL_MMUITACK 7
#define OMAP_DSP_MEM_IOCTL_MMUINIT 9
#define OMAP_DSP_MEM_IOCTL_KMEM_RESERVE 11
#define OMAP_DSP_MEM_IOCTL_KMEM_RELEASE 12
struct omap_dsp_mapinfo {
unsigned long dspadr;
unsigned long size;
};
/*
* for /dev/dspctl/twch
*/
#define OMAP_DSP_TWCH_IOCTL_MKDEV 1
#define OMAP_DSP_TWCH_IOCTL_RMDEV 2
#define OMAP_DSP_TWCH_IOCTL_TADD 11
#define OMAP_DSP_TWCH_IOCTL_TDEL 12
#define OMAP_DSP_TWCH_IOCTL_TKILL 13
#define OMAP_DSP_DEVSTATE_NOTASK 0x00000001
#define OMAP_DSP_DEVSTATE_ATTACHED 0x00000002
#define OMAP_DSP_DEVSTATE_GARBAGE 0x00000004
#define OMAP_DSP_DEVSTATE_INVALID 0x00000008
#define OMAP_DSP_DEVSTATE_ADDREQ 0x00000100
#define OMAP_DSP_DEVSTATE_DELREQ 0x00000200
#define OMAP_DSP_DEVSTATE_ADDFAIL 0x00001000
#define OMAP_DSP_DEVSTATE_ADDING 0x00010000
#define OMAP_DSP_DEVSTATE_DELING 0x00020000
#define OMAP_DSP_DEVSTATE_KILLING 0x00040000
#define OMAP_DSP_DEVSTATE_STATE_MASK 0x7fffffff
#define OMAP_DSP_DEVSTATE_STALE 0x80000000
struct omap_dsp_taddinfo {
unsigned char minor;
unsigned long taskadr;
};
#define OMAP_DSP_TADD_ABORTADR 0xffffffff
/*
* error cause definition (for error detection device)
*/
#define OMAP_DSP_ERRDT_WDT 0x00000001
#define OMAP_DSP_ERRDT_MMU 0x00000002
/*
* mailbox protocol definitions
*/
struct omap_dsp_mailbox_cmd {
unsigned short cmd;
unsigned short data;
};
struct omap_dsp_reginfo {
unsigned short adr;
unsigned short val;
};
struct omap_dsp_varinfo {
unsigned char varid;
unsigned short val[0];
};
#define OMAP_DSP_MBPROT_REVISION 0x0019
#define OMAP_DSP_MBCMD_WDSND 0x10
#define OMAP_DSP_MBCMD_WDREQ 0x11
#define OMAP_DSP_MBCMD_BKSND 0x20
#define OMAP_DSP_MBCMD_BKREQ 0x21
#define OMAP_DSP_MBCMD_BKYLD 0x23
#define OMAP_DSP_MBCMD_BKSNDP 0x24
#define OMAP_DSP_MBCMD_BKREQP 0x25
#define OMAP_DSP_MBCMD_TCTL 0x30
#define OMAP_DSP_MBCMD_TCTLDATA 0x31
#define OMAP_DSP_MBCMD_POLL 0x32
#define OMAP_DSP_MBCMD_WDT 0x50 /* v3.3: obsolete */
#define OMAP_DSP_MBCMD_RUNLEVEL 0x51
#define OMAP_DSP_MBCMD_PM 0x52
#define OMAP_DSP_MBCMD_SUSPEND 0x53
#define OMAP_DSP_MBCMD_KFUNC 0x54
#define OMAP_DSP_MBCMD_TCFG 0x60
#define OMAP_DSP_MBCMD_TADD 0x62
#define OMAP_DSP_MBCMD_TDEL 0x63
#define OMAP_DSP_MBCMD_TSTOP 0x65
#define OMAP_DSP_MBCMD_DSPCFG 0x70
#define OMAP_DSP_MBCMD_REGRW 0x72
#define OMAP_DSP_MBCMD_GETVAR 0x74
#define OMAP_DSP_MBCMD_SETVAR 0x75
#define OMAP_DSP_MBCMD_ERR 0x78
#define OMAP_DSP_MBCMD_DBG 0x79
#define OMAP_DSP_MBCMD_TCTL_TINIT 0x0000
#define OMAP_DSP_MBCMD_TCTL_TEN 0x0001
#define OMAP_DSP_MBCMD_TCTL_TDIS 0x0002
#define OMAP_DSP_MBCMD_TCTL_TCLR 0x0003
#define OMAP_DSP_MBCMD_TCTL_TCLR_FORCE 0x0004
#define OMAP_DSP_MBCMD_RUNLEVEL_USER 0x01
#define OMAP_DSP_MBCMD_RUNLEVEL_SUPER 0x0e
#define OMAP_DSP_MBCMD_RUNLEVEL_RECOVERY 0x10
#define OMAP_DSP_MBCMD_PM_DISABLE 0x00
#define OMAP_DSP_MBCMD_PM_ENABLE 0x01
#define OMAP_DSP_MBCMD_KFUNC_FBCTL 0x00
#define OMAP_DSP_MBCMD_FBCTL_ENABLE 0x0002
#define OMAP_DSP_MBCMD_FBCTL_DISABLE 0x0003
#define OMAP_DSP_MBCMD_TDEL_SAFE 0x0000
#define OMAP_DSP_MBCMD_TDEL_KILL 0x0001
#define OMAP_DSP_MBCMD_DSPCFG_REQ 0x00
#define OMAP_DSP_MBCMD_DSPCFG_SYSADRH 0x28
#define OMAP_DSP_MBCMD_DSPCFG_SYSADRL 0x29
#define OMAP_DSP_MBCMD_DSPCFG_PROTREV 0x70
#define OMAP_DSP_MBCMD_DSPCFG_ABORT 0x78
#define OMAP_DSP_MBCMD_DSPCFG_LAST 0x80
#define OMAP_DSP_MBCMD_REGRW_MEMR 0x00
#define OMAP_DSP_MBCMD_REGRW_MEMW 0x01
#define OMAP_DSP_MBCMD_REGRW_IOR 0x02
#define OMAP_DSP_MBCMD_REGRW_IOW 0x03
#define OMAP_DSP_MBCMD_REGRW_DATA 0x04
#define OMAP_DSP_MBCMD_VARID_ICRMASK 0x00
#define OMAP_DSP_MBCMD_VARID_LOADINFO 0x01
#define OMAP_DSP_TTYP_ARCV 0x0001
#define OMAP_DSP_TTYP_ASND 0x0002
#define OMAP_DSP_TTYP_BKMD 0x0004
#define OMAP_DSP_TTYP_BKDM 0x0008
#define OMAP_DSP_TTYP_PVMD 0x0010
#define OMAP_DSP_TTYP_PVDM 0x0020
#define OMAP_DSP_EID_BADTID 0x10
#define OMAP_DSP_EID_BADTCN 0x11
#define OMAP_DSP_EID_BADBID 0x20
#define OMAP_DSP_EID_BADCNT 0x21
#define OMAP_DSP_EID_NOTLOCKED 0x22
#define OMAP_DSP_EID_STVBUF 0x23
#define OMAP_DSP_EID_BADADR 0x24
#define OMAP_DSP_EID_BADTCTL 0x30
#define OMAP_DSP_EID_BADPARAM 0x50
#define OMAP_DSP_EID_FATAL 0x58
#define OMAP_DSP_EID_NOMEM 0xc0
#define OMAP_DSP_EID_NORES 0xc1
#define OMAP_DSP_EID_IPBFULL 0xc2
#define OMAP_DSP_EID_WDT 0xd0
#define OMAP_DSP_EID_TASKNOTRDY 0xe0
#define OMAP_DSP_EID_TASKBSY 0xe1
#define OMAP_DSP_EID_TASKERR 0xef
#define OMAP_DSP_EID_BADCFGTYP 0xf0
#define OMAP_DSP_EID_DEBUG 0xf8
#define OMAP_DSP_EID_BADSEQ 0xfe
#define OMAP_DSP_EID_BADCMD 0xff
#define OMAP_DSP_TNM_LEN 16
#define OMAP_DSP_TID_FREE 0xff
#define OMAP_DSP_TID_ANON 0xfe
#define OMAP_DSP_BID_NULL 0xffff
#define OMAP_DSP_BID_PVT 0xfffe
#endif /* ASM_ARCH_DSP_H */

37
include/asm-arm/arch-omap/dsp_common.h 100644
View File

@ -0,0 +1,37 @@
/*
* linux/include/asm-arm/arch-omap/dsp_common.h
*
* Header for OMAP DSP subsystem control
*
* Copyright (C) 2004,2005 Nokia Corporation
*
* Written by Toshihiro Kobayashi <toshihiro.kobayashi@nokia.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* 2005/06/03: DSP Gateway version 3.3
*/
#ifndef ASM_ARCH_DSP_COMMON_H
#define ASM_ARCH_DSP_COMMON_H
void omap_dsp_pm_suspend(void);
void omap_dsp_pm_resume(void);
void omap_dsp_request_mpui(void);
void omap_dsp_release_mpui(void);
int omap_dsp_request_mem(void);
int omap_dsp_release_mem(void);
#endif /* ASM_ARCH_DSP_COMMON_H */

28
include/asm-arm/arch-omap/entry-macro.S
View File

@ -8,6 +8,8 @@
* warranty of any kind, whether express or implied.
*/
#if defined(CONFIG_ARCH_OMAP1)
.macro disable_fiq
.endm
@ -30,3 +32,29 @@
1510:
.endm
#elif defined(CONFIG_ARCH_OMAP24XX)
#include <asm/arch/omap24xx.h>
.macro disable_fiq
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =VA_IC_BASE
ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
cmp \irqnr, #0x0
bne 2222f
ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
cmp \irqnr, #0x0
bne 2222f
ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
cmp \irqnr, #0x0
2222:
ldrne \irqnr, [\base, #IRQ_SIR_IRQ]
.endm
.macro irq_prio_table
.endm
#endif

28
include/asm-arm/arch-omap/gpio.h
View File

@ -3,7 +3,7 @@
*
* OMAP GPIO handling defines and functions
*
* Copyright (C) 2003 Nokia Corporation
* Copyright (C) 2003-2005 Nokia Corporation
*
* Written by Juha Yrjölä <juha.yrjola@nokia.com>
*
@ -30,7 +30,23 @@
#include <asm/arch/irqs.h>
#include <asm/io.h>
#define OMAP_MPUIO_BASE 0xfffb5000
#define OMAP_MPUIO_BASE (void __iomem *)0xfffb5000
#ifdef CONFIG_ARCH_OMAP730
#define OMAP_MPUIO_INPUT_LATCH 0x00
#define OMAP_MPUIO_OUTPUT 0x02
#define OMAP_MPUIO_IO_CNTL 0x04
#define OMAP_MPUIO_KBR_LATCH 0x08
#define OMAP_MPUIO_KBC 0x0a
#define OMAP_MPUIO_GPIO_EVENT_MODE 0x0c
#define OMAP_MPUIO_GPIO_INT_EDGE 0x0e
#define OMAP_MPUIO_KBD_INT 0x10
#define OMAP_MPUIO_GPIO_INT 0x12
#define OMAP_MPUIO_KBD_MASKIT 0x14
#define OMAP_MPUIO_GPIO_MASKIT 0x16
#define OMAP_MPUIO_GPIO_DEBOUNCING 0x18
#define OMAP_MPUIO_LATCH 0x1a
#else
#define OMAP_MPUIO_INPUT_LATCH 0x00
#define OMAP_MPUIO_OUTPUT 0x04
#define OMAP_MPUIO_IO_CNTL 0x08
@ -44,6 +60,7 @@
#define OMAP_MPUIO_GPIO_MASKIT 0x2c
#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30
#define OMAP_MPUIO_LATCH 0x34
#endif
#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr))
#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES)
@ -52,18 +69,11 @@
IH_MPUIO_BASE + ((nr) & 0x0f) : \
IH_GPIO_BASE + ((nr) & 0x3f))
/* For EDGECTRL */
#define OMAP_GPIO_NO_EDGE 0x00
#define OMAP_GPIO_FALLING_EDGE 0x01
#define OMAP_GPIO_RISING_EDGE 0x02
#define OMAP_GPIO_BOTH_EDGES 0x03
extern int omap_gpio_init(void); /* Call from board init only */
extern int omap_request_gpio(int gpio);
extern void omap_free_gpio(int gpio);
extern void omap_set_gpio_direction(int gpio, int is_input);
extern void omap_set_gpio_dataout(int gpio, int enable);
extern int omap_get_gpio_datain(int gpio);
extern void omap_set_gpio_edge_ctrl(int gpio, int edge);
#endif

39
include/asm-arm/arch-omap/hardware.h
View File

@ -43,6 +43,7 @@
#include <asm/arch/cpu.h>
#endif
#include <asm/arch/io.h>
#include <asm/arch/serial.h>
/*
* ---------------------------------------------------------------------------
@ -89,11 +90,12 @@
/* DPLL control registers */
#define DPLL_CTL (0xfffecf00)
/* DSP clock control */
/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
#define DSP_CONFIG_REG_BASE (0xe1008000)
#define DSP_CKCTL (DSP_CONFIG_REG_BASE + 0x0)
#define DSP_IDLECT1 (DSP_CONFIG_REG_BASE + 0x4)
#define DSP_IDLECT2 (DSP_CONFIG_REG_BASE + 0x8)
#define DSP_RSTCT2 (DSP_CONFIG_REG_BASE + 0x14)
/*
* ---------------------------------------------------------------------------
@ -142,6 +144,13 @@
* Interrupts
* ---------------------------------------------------------------------------
*/
#ifdef CONFIG_ARCH_OMAP1
/*
* XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
* or something similar.. -- PFM.
*/
#define OMAP_IH1_BASE 0xfffecb00
#define OMAP_IH2_BASE 0xfffe0000
@ -170,6 +179,8 @@
#define IRQ_ILR0_REG_OFFSET 0x1c
#define IRQ_GMR_REG_OFFSET 0xa0
#endif
/*
* ----------------------------------------------------------------------------
* System control registers
@ -258,26 +269,6 @@
#ifndef __ASSEMBLER__
/*
* ---------------------------------------------------------------------------
* Serial ports
* ---------------------------------------------------------------------------
*/
#define OMAP_UART1_BASE (unsigned char *)0xfffb0000
#define OMAP_UART2_BASE (unsigned char *)0xfffb0800
#define OMAP_UART3_BASE (unsigned char *)0xfffb9800
#define OMAP_MAX_NR_PORTS 3
#define OMAP1510_BASE_BAUD (12000000/16)
#define OMAP16XX_BASE_BAUD (48000000/16)
#define is_omap_port(p) ({int __ret = 0; \
if (p == IO_ADDRESS(OMAP_UART1_BASE) || \
p == IO_ADDRESS(OMAP_UART2_BASE) || \
p == IO_ADDRESS(OMAP_UART3_BASE)) \
__ret = 1; \
__ret; \
})
/*
* ---------------------------------------------------------------------------
* Processor specific defines
@ -286,6 +277,11 @@
#include "omap730.h"
#include "omap1510.h"
#ifdef CONFIG_ARCH_OMAP24XX
#include "omap24xx.h"
#endif
#include "omap16xx.h"
/*
@ -312,7 +308,6 @@
#ifdef CONFIG_MACH_OMAP_H4
#include "board-h4.h"
#error "Support for H4 board not yet implemented."
#endif
#ifdef CONFIG_MACH_OMAP_OSK

26
include/asm-arm/arch-omap/io.h
View File

@ -49,16 +49,24 @@
* I/O mapping
* ----------------------------------------------------------------------------
*/
#define IO_PHYS 0xFFFB0000
#define IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define IO_VIRT (IO_PHYS - IO_OFFSET)
#define IO_SIZE 0x40000
#define IO_ADDRESS(x) ((x) - IO_OFFSET)
#define PCIO_BASE 0
#if defined(CONFIG_ARCH_OMAP1)
#define IO_PHYS 0xFFFB0000
#define IO_OFFSET -0x01000000 /* Virtual IO = 0xfefb0000 */
#define IO_SIZE 0x40000
#define io_p2v(x) ((x) - IO_OFFSET)
#define io_v2p(x) ((x) + IO_OFFSET)
#elif defined(CONFIG_ARCH_OMAP2)
#define IO_PHYS 0x48000000 /* L4 peripherals; other stuff has to be mapped *
* manually. */
#define IO_OFFSET 0x90000000 /* Virtual IO = 0xd8000000 */
#define IO_SIZE 0x08000000
#endif
#define IO_VIRT (IO_PHYS + IO_OFFSET)
#define IO_ADDRESS(x) ((x) + IO_OFFSET)
#define PCIO_BASE 0
#define io_p2v(x) ((x) + IO_OFFSET)
#define io_v2p(x) ((x) - IO_OFFSET)
#ifndef __ASSEMBLER__
@ -96,6 +104,8 @@ typedef struct { volatile u32 offset[4096]; } __regbase32;
->offset[((vaddr)&4095)>>2]
#define __REG32(paddr) __REGV32(io_p2v(paddr))
extern void omap_map_common_io(void);
#else
#define __REG8(paddr) io_p2v(paddr)

6
include/asm-arm/arch-omap/irqs.h
View File

@ -135,7 +135,6 @@
/*
* OMAP-1510 specific IRQ numbers for interrupt handler 2
*/
#define INT_1510_OS_32kHz_TIMER (22 + IH2_BASE)
#define INT_1510_COM_SPI_RO (31 + IH2_BASE)
/*
@ -232,6 +231,11 @@
#define INT_730_DMA_CH15 (62 + IH2_BASE)
#define INT_730_NAND (63 + IH2_BASE)
#define INT_24XX_GPIO_BANK1 29
#define INT_24XX_GPIO_BANK2 30
#define INT_24XX_GPIO_BANK3 31
#define INT_24XX_GPIO_BANK4 32
/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730) and
* 16 MPUIO lines */
#define OMAP_MAX_GPIO_LINES 192

14
include/asm-arm/arch-omap/memory.h
View File

@ -36,12 +36,11 @@
/*
* Physical DRAM offset.
*/
#if defined(CONFIG_ARCH_OMAP1)
#define PHYS_OFFSET (0x10000000UL)
/*
* OMAP-1510 Local Bus address offset
*/
#define OMAP1510_LB_OFFSET (0x30000000UL)
#elif defined(CONFIG_ARCH_OMAP2)
#define PHYS_OFFSET (0x80000000UL)
#endif
/*
* Conversion between SDRAM and fake PCI bus, used by USB
@ -64,6 +63,11 @@
*/
#ifdef CONFIG_ARCH_OMAP1510
/*
* OMAP-1510 Local Bus address offset
*/
#define OMAP1510_LB_OFFSET (0x30000000UL)
#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
#define is_lbus_device(dev) (cpu_is_omap1510() && dev && (strncmp(dev->bus_id, "ohci", 4) == 0))

61
include/asm-arm/arch-omap/mtd-xip.h 100644
View File

@ -0,0 +1,61 @@
/*
* MTD primitives for XIP support. Architecture specific functions.
*
* Do not include this file directly. It's included from linux/mtd/xip.h
*
* Author: Vladimir Barinov <vbarinov@ru.mvista.com>
*
* (c) 2005 MontaVista Software, Inc. This file is licensed under the
* terms of the GNU General Public License version 2. This program is
* licensed "as is" without any warranty of any kind, whether express or
* implied.
*/
#ifndef __ARCH_OMAP_MTD_XIP_H__
#define __ARCH_OMAP_MTD_XIP_H__
#include <asm/hardware.h>
#define OMAP_MPU_TIMER_BASE (0xfffec500)
#define OMAP_MPU_TIMER_OFFSET 0x100
typedef struct {
u32 cntl; /* CNTL_TIMER, R/W */
u32 load_tim; /* LOAD_TIM, W */
u32 read_tim; /* READ_TIM, R */
} xip_omap_mpu_timer_regs_t;
#define xip_omap_mpu_timer_base(n) \
((volatile xip_omap_mpu_timer_regs_t*)IO_ADDRESS(OMAP_MPU_TIMER_BASE + \
(n)*OMAP_MPU_TIMER_OFFSET))
static inline unsigned long xip_omap_mpu_timer_read(int nr)
{
volatile xip_omap_mpu_timer_regs_t* timer = xip_omap_mpu_timer_base(nr);
return timer->read_tim;
}
#define xip_irqpending() \
(omap_readl(OMAP_IH1_ITR) & ~omap_readl(OMAP_IH1_MIR))
#define xip_currtime() (~xip_omap_mpu_timer_read(0))
/*
* It's permitted to do approxmation for xip_elapsed_since macro
* (see linux/mtd/xip.h)
*/
#ifdef CONFIG_MACH_OMAP_PERSEUS2
#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 7)
#else
#define xip_elapsed_since(x) (signed)((~xip_omap_mpu_timer_read(0) - (x)) / 6)
#endif
/*
* xip_cpu_idle() is used when waiting for a delay equal or larger than
* the system timer tick period. This should put the CPU into idle mode
* to save power and to be woken up only when some interrupts are pending.
* As above, this should not rely upon standard kernel code.
*/
#define xip_cpu_idle() asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (1))
#endif /* __ARCH_OMAP_MTD_XIP_H__ */

10
include/asm-arm/arch-omap/mux.h
View File

@ -185,6 +185,7 @@ typedef enum {
/* MPUIO */
MPUIO2,
N15_1610_MPUIO2,
MPUIO4,
MPUIO5,
T20_1610_MPUIO5,
@ -210,6 +211,7 @@ typedef enum {
/* Misc ballouts */
BALLOUT_V8_ARMIO3,
N20_HDQ,
/* OMAP-1610 MMC2 */
W8_1610_MMC2_DAT0,
@ -235,6 +237,7 @@ typedef enum {
P20_1610_GPIO4,
V9_1610_GPIO7,
W8_1610_GPIO9,
N20_1610_GPIO11,
N19_1610_GPIO13,
P10_1610_GPIO22,
V5_1610_GPIO24,
@ -250,7 +253,7 @@ typedef enum {
U18_1610_UWIRE_SDI,
W21_1610_UWIRE_SDO,
N14_1610_UWIRE_CS0,
P15_1610_UWIRE_CS0,
P15_1610_UWIRE_CS3,
N15_1610_UWIRE_CS1,
/* OMAP-1610 Flash */
@ -411,7 +414,8 @@ MUX_CFG("N21_1710_GPIO14", 6, 9, 0, 1, 1, 1, 1, 1, 1)
MUX_CFG("W15_1710_GPIO40", 9, 27, 7, 2, 5, 1, 2, 1, 1)
/* MPUIO */
MUX_CFG("MPUIO2", 7, 18, 0, 1, 1, 1, NA, 0, 1)
MUX_CFG("MPUIO2", 7, 18, 0, 1, 14, 1, NA, 0, 1)
MUX_CFG("N15_1610_MPUIO2", 7, 18, 0, 1, 14, 1, 1, 0, 1)
MUX_CFG("MPUIO4", 7, 15, 0, 1, 13, 1, NA, 0, 1)
MUX_CFG("MPUIO5", 7, 12, 0, 1, 12, 1, NA, 0, 1)
@ -438,6 +442,7 @@ MUX_CFG("MCBSP3_CLKX", 9, 3, 1, 1, 29, 0, NA, 0, 1)
/* Misc ballouts */
MUX_CFG("BALLOUT_V8_ARMIO3", B, 18, 0, 2, 25, 1, NA, 0, 1)
MUX_CFG("N20_HDQ", 6, 18, 1, 1, 4, 0, 1, 4, 0)
/* OMAP-1610 MMC2 */
MUX_CFG("W8_1610_MMC2_DAT0", B, 21, 6, 2, 23, 1, 2, 1, 1)
@ -463,6 +468,7 @@ MUX_CFG("J18_1610_ETM_D7", 5, 27, 1, 0, 19, 0, 0, 0, 1)
MUX_CFG("P20_1610_GPIO4", 6, 27, 0, 1, 7, 0, 1, 1, 1)
MUX_CFG("V9_1610_GPIO7", B, 12, 1, 2, 20, 0, 2, 1, 1)
MUX_CFG("W8_1610_GPIO9", B, 21, 0, 2, 23, 0, 2, 1, 1)
MUX_CFG("N20_1610_GPIO11", 6, 18, 0, 1, 4, 0, 1, 1, 1)
MUX_CFG("N19_1610_GPIO13", 6, 12, 0, 1, 2, 0, 1, 1, 1)
MUX_CFG("P10_1610_GPIO22", C, 0, 7, 2, 26, 0, 2, 1, 1)
MUX_CFG("V5_1610_GPIO24", B, 15, 7, 2, 21, 0, 2, 1, 1)

13
include/asm-arm/arch-omap/omap1510.h
View File

@ -36,10 +36,6 @@
/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
#define OMAP1510_SRAM_BASE 0xD0000000
#define OMAP1510_SRAM_SIZE (SZ_128K + SZ_64K)
#define OMAP1510_SRAM_START 0x20000000
#define OMAP1510_DSP_BASE 0xE0000000
#define OMAP1510_DSP_SIZE 0x28000
#define OMAP1510_DSP_START 0xE0000000
@ -48,14 +44,5 @@
#define OMAP1510_DSPREG_SIZE SZ_128K
#define OMAP1510_DSPREG_START 0xE1000000
/*
* ----------------------------------------------------------------------------
* Memory used by power management
* ----------------------------------------------------------------------------
*/
#define OMAP1510_SRAM_IDLE_SUSPEND (OMAP1510_SRAM_BASE + OMAP1510_SRAM_SIZE - 0x200)
#define OMAP1510_SRAM_API_SUSPEND (OMAP1510_SRAM_IDLE_SUSPEND + 0x100)
#endif /* __ASM_ARCH_OMAP1510_H */

16
include/asm-arm/arch-omap/omap16xx.h
View File

@ -36,11 +36,6 @@
/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
#define OMAP16XX_SRAM_BASE 0xD0000000
#define OMAP1610_SRAM_SIZE (SZ_16K)
#define OMAP5912_SRAM_SIZE 0x3E800
#define OMAP16XX_SRAM_START 0x20000000
#define OMAP16XX_DSP_BASE 0xE0000000
#define OMAP16XX_DSP_SIZE 0x28000
#define OMAP16XX_DSP_START 0xE0000000
@ -49,17 +44,6 @@
#define OMAP16XX_DSPREG_SIZE SZ_128K
#define OMAP16XX_DSPREG_START 0xE1000000
/*
* ----------------------------------------------------------------------------
* Memory used by power management
* ----------------------------------------------------------------------------
*/
#define OMAP1610_SRAM_IDLE_SUSPEND (OMAP16XX_SRAM_BASE + OMAP1610_SRAM_SIZE - 0x200)
#define OMAP1610_SRAM_API_SUSPEND (OMAP1610_SRAM_IDLE_SUSPEND + 0x100)
#define OMAP5912_SRAM_IDLE_SUSPEND (OMAP16XX_SRAM_BASE + OMAP5912_SRAM_SIZE - 0x200)
#define OMAP5912_SRAM_API_SUSPEND (OMAP5912_SRAM_IDLE_SUSPEND + 0x100)
/*
* ---------------------------------------------------------------------------
* Interrupts

15
include/asm-arm/arch-omap/omap24xx.h 100644
View File

@ -0,0 +1,15 @@
#ifndef __ASM_ARCH_OMAP24XX_H
#define __ASM_ARCH_OMAP24XX_H
#define OMAP24XX_L4_IO_BASE 0x48000000
/* interrupt controller */
#define OMAP24XX_IC_BASE (OMAP24XX_L4_IO_BASE + 0xfe000)
#define VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
#define OMAP24XX_IVA_INTC_BASE 0x40000000
#define IRQ_SIR_IRQ 0x0040
#endif /* __ASM_ARCH_OMAP24XX_H */

4
include/asm-arm/arch-omap/omap730.h
View File

@ -36,10 +36,6 @@
/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
#define OMAP730_SRAM_BASE 0xD0000000
#define OMAP730_SRAM_SIZE (SZ_128K + SZ_64K + SZ_8K)
#define OMAP730_SRAM_START 0x20000000
#define OMAP730_DSP_BASE 0xE0000000
#define OMAP730_DSP_SIZE 0x50000
#define OMAP730_DSP_START 0xE0000000

55
include/asm-arm/arch-omap/pm.h
View File

@ -61,7 +61,10 @@
#define PER_EN 0x1
#define CPU_SUSPEND_SIZE 200
#define ULPD_LOW_POWER_EN 0x0001
#define ULPD_LOW_PWR_EN 0x0001
#define ULPD_DEEP_SLEEP_TRANSITION_EN 0x0010
#define ULPD_SETUP_ANALOG_CELL_3_VAL 0
#define ULPD_POWER_CTRL_REG_VAL 0x0219
#define DSP_IDLE_DELAY 10
#define DSP_IDLE 0x0040
@ -86,46 +89,35 @@
#define OMAP1510_BIG_SLEEP_REQUEST 0x0cc5
#define OMAP1510_IDLE_LOOP_REQUEST 0x0c00
#define OMAP1510_IDLE_CLOCK_DOMAINS 0x2
#define OMAP1510_ULPD_LOW_POWER_REQ 0x0001
#define OMAP1610_DEEP_SLEEP_REQUEST 0x17c7
#define OMAP1610_BIG_SLEEP_REQUEST TBD
/* Both big sleep and deep sleep use same values. Difference is in ULPD. */
#define OMAP1610_IDLECT1_SLEEP_VAL 0x13c7
#define OMAP1610_IDLECT2_SLEEP_VAL 0x09c7
#define OMAP1610_IDLECT3_VAL 0x3f
#define OMAP1610_IDLECT3_SLEEP_ORMASK 0x2c
#define OMAP1610_IDLECT3 0xfffece24
#define OMAP1610_IDLE_LOOP_REQUEST 0x0400
#define OMAP1610_IDLE_CLOCK_DOMAINS 0x09c7
#define OMAP1610_ULPD_LOW_POWER_REQ 0x3
#ifndef OMAP1510_SRAM_IDLE_SUSPEND
#define OMAP1510_SRAM_IDLE_SUSPEND 0
#endif
#ifndef OMAP1610_SRAM_IDLE_SUSPEND
#define OMAP1610_SRAM_IDLE_SUSPEND 0
#endif
#ifndef OMAP5912_SRAM_IDLE_SUSPEND
#define OMAP5912_SRAM_IDLE_SUSPEND 0
#endif
#ifndef OMAP1510_SRAM_API_SUSPEND
#define OMAP1510_SRAM_API_SUSPEND 0
#endif
#ifndef OMAP1610_SRAM_API_SUSPEND
#define OMAP1610_SRAM_API_SUSPEND 0
#endif
#ifndef OMAP5912_SRAM_API_SUSPEND
#define OMAP5912_SRAM_API_SUSPEND 0
#endif
#if !defined(CONFIG_ARCH_OMAP1510) && \
!defined(CONFIG_ARCH_OMAP16XX)
!defined(CONFIG_ARCH_OMAP16XX) && \
!defined(CONFIG_ARCH_OMAP24XX)
#error "Power management for this processor not implemented yet"
#endif
#ifndef __ASSEMBLER__
extern void omap_pm_idle(void);
extern void omap_pm_suspend(void);
extern int omap1510_cpu_suspend(unsigned short, unsigned short);
extern int omap1610_cpu_suspend(unsigned short, unsigned short);
extern int omap1510_idle_loop_suspend(void);
extern int omap1610_idle_loop_suspend(void);
extern void omap1510_cpu_suspend(unsigned short, unsigned short);
extern void omap1610_cpu_suspend(unsigned short, unsigned short);
extern void omap1510_idle_loop_suspend(void);
extern void omap1610_idle_loop_suspend(void);
#ifdef CONFIG_OMAP_SERIAL_WAKE
extern void omap_serial_wake_trigger(int enable);
#else
#define omap_serial_wake_trigger(x) {}
#endif /* CONFIG_OMAP_SERIAL_WAKE */
extern unsigned int omap1510_cpu_suspend_sz;
extern unsigned int omap1510_idle_loop_suspend_sz;
extern unsigned int omap1610_cpu_suspend_sz;
@ -161,6 +153,7 @@ enum arm_save_state {
ARM_SLEEP_SAVE_ARM_CKCTL,
ARM_SLEEP_SAVE_ARM_IDLECT1,
ARM_SLEEP_SAVE_ARM_IDLECT2,
ARM_SLEEP_SAVE_ARM_IDLECT3,
ARM_SLEEP_SAVE_ARM_EWUPCT,
ARM_SLEEP_SAVE_ARM_RSTCT1,
ARM_SLEEP_SAVE_ARM_RSTCT2,

37
include/asm-arm/arch-omap/serial.h 100644
View File

@ -0,0 +1,37 @@
/*
* linux/include/asm-arm/arch-omap/serial.h
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ASM_ARCH_SERIAL_H
#define __ASM_ARCH_SERIAL_H
#if defined(CONFIG_ARCH_OMAP1)
/* OMAP1 serial ports */
#define OMAP_UART1_BASE 0xfffb0000
#define OMAP_UART2_BASE 0xfffb0800
#define OMAP_UART3_BASE 0xfffb9800
#elif defined(CONFIG_ARCH_OMAP2)
/* OMAP2 serial ports */
#define OMAP_UART1_BASE 0x4806a000
#define OMAP_UART2_BASE 0x4806c000
#define OMAP_UART3_BASE 0x4806e000
#endif
#define OMAP_MAX_NR_PORTS 3
#define OMAP1510_BASE_BAUD (12000000/16)
#define OMAP16XX_BASE_BAUD (48000000/16)
#define is_omap_port(p) ({int __ret = 0; \
if (p == IO_ADDRESS(OMAP_UART1_BASE) || \
p == IO_ADDRESS(OMAP_UART2_BASE) || \
p == IO_ADDRESS(OMAP_UART3_BASE)) \
__ret = 1; \
__ret; \
})
#endif

10
include/asm-arm/arch-omap/uncompress.h
View File

@ -20,7 +20,7 @@
#include <linux/config.h>
#include <linux/types.h>
#include <linux/serial_reg.h>
#include <asm/arch/hardware.h>
#include <asm/arch/serial.h>
unsigned int system_rev;
@ -34,8 +34,9 @@ static void
putstr(const char *s)
{
volatile u8 * uart = 0;
int shift;
int shift = 2;
#ifdef CONFIG_ARCH_OMAP
#ifdef CONFIG_OMAP_LL_DEBUG_UART3
uart = (volatile u8 *)(OMAP_UART3_BASE);
#elif CONFIG_OMAP_LL_DEBUG_UART2
@ -44,6 +45,7 @@ putstr(const char *s)
uart = (volatile u8 *)(OMAP_UART1_BASE);
#endif
#ifdef CONFIG_ARCH_OMAP1
/* Determine which serial port to use */
do {
/* MMU is not on, so cpu_is_omapXXXX() won't work here */
@ -51,14 +53,14 @@ putstr(const char *s)
if (omap_id == OMAP_ID_730)
shift = 0;
else
shift = 2;
if (check_port(uart, shift))
break;
/* Silent boot if no serial ports are enabled. */
return;
} while (0);
#endif /* CONFIG_ARCH_OMAP1 */
#endif
/*
* Now, xmit each character