Merge 3.7-rc6 into char-misc-next

Documentation/arm64/memory.txt

@@ -27,17 +27,17 @@ Start			End			Size		Use
 -----------------------------------------------------------------------
 0000000000000000	0000007fffffffff	 512GB		user
 
-ffffff8000000000	ffffffbbfffcffff	~240GB		vmalloc
+ffffff8000000000	ffffffbbfffeffff	~240GB		vmalloc
 
-ffffffbbfffd0000	ffffffbcfffdffff	  64KB		[guard page]
-
-ffffffbbfffe0000	ffffffbcfffeffff	  64KB		PCI I/O space
-
-ffffffbbffff0000	ffffffbcffffffff	  64KB		[guard page]
+ffffffbbffff0000	ffffffbbffffffff	  64KB		[guard page]
 
 ffffffbc00000000	ffffffbdffffffff	   8GB		vmemmap
 
-ffffffbe00000000	ffffffbffbffffff	  ~8GB		[guard, future vmmemap]
+ffffffbe00000000	ffffffbffbbfffff	  ~8GB		[guard, future vmmemap]
+
+ffffffbffbe00000	ffffffbffbe0ffff	  64KB		PCI I/O space
+
+ffffffbbffff0000	ffffffbcffffffff	  ~2MB		[guard]
 
 ffffffbffc000000	ffffffbfffffffff	  64MB		modules
 

Documentation/cgroups/memory.txt

@@ -466,6 +466,10 @@ Note:
 5.3 swappiness
 
 Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
+Please note that unlike the global swappiness, memcg knob set to 0
+really prevents from any swapping even if there is a swap storage
+available. This might lead to memcg OOM killer if there are no file
+pages to reclaim.
 
 Following cgroups' swappiness can't be changed.
 - root cgroup (uses /proc/sys/vm/swappiness).

Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt

@@ -0,0 +1,19 @@
+* EETI eGalax Multiple Touch Controller
+
+Required properties:
+- compatible: must be "eeti,egalax_ts"
+- reg: i2c slave address
+- interrupt-parent: the phandle for the interrupt controller
+- interrupts: touch controller interrupt
+- wakeup-gpios: the gpio pin to be used for waking up the controller
+  as well as uased as irq pin
+
+Example:
+
+	egalax_ts@04 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 2>;
+		wakeup-gpios = <&gpio1 9 0>;
+	};

Documentation/filesystems/proc.txt

@@ -33,7 +33,7 @@ Table of Contents
   2	Modifying System Parameters
 
   3	Per-Process Parameters
-  3.1	/proc/<pid>/oom_score_adj - Adjust the oom-killer
+  3.1	/proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer
 								score
   3.2	/proc/<pid>/oom_score - Display current oom-killer score
   3.3	/proc/<pid>/io - Display the IO accounting fields
@@ -1320,10 +1320,10 @@ of the kernel.
 CHAPTER 3: PER-PROCESS PARAMETERS
 ------------------------------------------------------------------------------
 
-3.1 /proc/<pid>/oom_score_adj- Adjust the oom-killer score
+3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score
 --------------------------------------------------------------------------------
 
-This file can be used to adjust the badness heuristic used to select which
+These file can be used to adjust the badness heuristic used to select which
 process gets killed in out of memory conditions.
 
 The badness heuristic assigns a value to each candidate task ranging from 0
@@ -1361,6 +1361,12 @@ same system, cpuset, mempolicy, or memory controller resources to use at least
 equivalent to discounting 50% of the task's allowed memory from being considered
 as scoring against the task.
 
+For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also
+be used to tune the badness score.  Its acceptable values range from -16
+(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17
+(OOM_DISABLE) to disable oom killing entirely for that task.  Its value is
+scaled linearly with /proc/<pid>/oom_score_adj.
+
 The value of /proc/<pid>/oom_score_adj may be reduced no lower than the last
 value set by a CAP_SYS_RESOURCE process. To reduce the value any lower
 requires CAP_SYS_RESOURCE.
@@ -1375,7 +1381,9 @@ minimal amount of work.
 -------------------------------------------------------------
 
 This file can be used to check the current score used by the oom-killer is for
-any given <pid>.
+any given <pid>. Use it together with /proc/<pid>/oom_score_adj to tune which
+process should be killed in an out-of-memory situation.
+
 
 3.3  /proc/<pid>/io - Display the IO accounting fields
 -------------------------------------------------------

Documentation/hwmon/fam15h_power

@@ -10,7 +10,7 @@ Supported chips:
   BIOS and Kernel Developer's Guide (BKDG) For AMD Family 15h Processors
     (not yet published)
 
-Author: Andreas Herrmann <andreas.herrmann3@amd.com>
+Author: Andreas Herrmann <herrmann.der.user@googlemail.com>
 
 Description
 -----------

Documentation/networking/netdev-features.txt

@@ -164,4 +164,4 @@ read the CRC recorded by the NIC on receipt of the packet.
 This requests that the NIC receive all possible frames, including errored
 frames (such as bad FCS, etc).  This can be helpful when sniffing a link with
 bad packets on it.  Some NICs may receive more packets if also put into normal
-PROMISC mdoe.
+PROMISC mode.

MAINTAINERS

@@ -503,7 +503,7 @@ F:	include/linux/altera_uart.h
 F:	include/linux/altera_jtaguart.h
 
 AMD FAM15H PROCESSOR POWER MONITORING DRIVER
-M:	Andreas Herrmann <andreas.herrmann3@amd.com>
+M:	Andreas Herrmann <herrmann.der.user@googlemail.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/fam15h_power
@@ -2507,6 +2507,7 @@ M:	Joonyoung Shim <jy0922.shim@samsung.com>
 M:	Seung-Woo Kim <sw0312.kim@samsung.com>
 M:	Kyungmin Park <kyungmin.park@samsung.com>
 L:	dri-devel@lists.freedesktop.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git
 S:	Supported
 F:	drivers/gpu/drm/exynos
 F:	include/drm/exynos*
@@ -3597,6 +3598,49 @@ F:	drivers/hid/hid-hyperv.c
 F:	drivers/net/hyperv/
 F:	drivers/staging/hv/
 
+I2C OVER PARALLEL PORT
+M:	Jean Delvare <khali@linux-fr.org>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/i2c/busses/i2c-parport
+F:	Documentation/i2c/busses/i2c-parport-light
+F:	drivers/i2c/busses/i2c-parport.c
+F:	drivers/i2c/busses/i2c-parport-light.c
+
+I2C/SMBUS CONTROLLER DRIVERS FOR PC
+M:	Jean Delvare <khali@linux-fr.org>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/i2c/busses/i2c-ali1535
+F:	Documentation/i2c/busses/i2c-ali1563
+F:	Documentation/i2c/busses/i2c-ali15x3
+F:	Documentation/i2c/busses/i2c-amd756
+F:	Documentation/i2c/busses/i2c-amd8111
+F:	Documentation/i2c/busses/i2c-i801
+F:	Documentation/i2c/busses/i2c-nforce2
+F:	Documentation/i2c/busses/i2c-piix4
+F:	Documentation/i2c/busses/i2c-sis5595
+F:	Documentation/i2c/busses/i2c-sis630
+F:	Documentation/i2c/busses/i2c-sis96x
+F:	Documentation/i2c/busses/i2c-via
+F:	Documentation/i2c/busses/i2c-viapro
+F:	drivers/i2c/busses/i2c-ali1535.c
+F:	drivers/i2c/busses/i2c-ali1563.c
+F:	drivers/i2c/busses/i2c-ali15x3.c
+F:	drivers/i2c/busses/i2c-amd756.c
+F:	drivers/i2c/busses/i2c-amd756-s4882.c
+F:	drivers/i2c/busses/i2c-amd8111.c
+F:	drivers/i2c/busses/i2c-i801.c
+F:	drivers/i2c/busses/i2c-isch.c
+F:	drivers/i2c/busses/i2c-nforce2.c
+F:	drivers/i2c/busses/i2c-nforce2-s4985.c
+F:	drivers/i2c/busses/i2c-piix4.c
+F:	drivers/i2c/busses/i2c-sis5595.c
+F:	drivers/i2c/busses/i2c-sis630.c
+F:	drivers/i2c/busses/i2c-sis96x.c
+F:	drivers/i2c/busses/i2c-via.c
+F:	drivers/i2c/busses/i2c-viapro.c
+
 I2C/SMBUS STUB DRIVER
 M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	linux-i2c@vger.kernel.org
@@ -3604,9 +3648,8 @@ S:	Maintained
 F:	drivers/i2c/busses/i2c-stub.c
 
 I2C SUBSYSTEM
-M:	"Jean Delvare (PC drivers, core)" <khali@linux-fr.org>
+M:	Wolfram Sang <w.sang@pengutronix.de>
 M:	"Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
-M:	"Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
@@ -3617,6 +3660,13 @@ F:	drivers/i2c/
 F:	include/linux/i2c.h
 F:	include/linux/i2c-*.h
 
+I2C-TAOS-EVM DRIVER
+M:	Jean Delvare <khali@linux-fr.org>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/i2c/busses/i2c-taos-evm
+F:	drivers/i2c/busses/i2c-taos-evm.c
+
 I2C-TINY-USB DRIVER
 M:	Till Harbaum <till@harbaum.org>
 L:	linux-i2c@vger.kernel.org
@@ -5647,7 +5697,7 @@ S:	Maintained
 F:	drivers/pinctrl/spear/
 
 PKTCDVD DRIVER
-M:	Peter Osterlund <petero2@telia.com>
+M:	Jiri Kosina <jkosina@suse.cz>
 S:	Maintained
 F:	drivers/block/pktcdvd.c
 F:	include/linux/pktcdvd.h
@@ -7209,6 +7259,14 @@ L:	linux-xtensa@linux-xtensa.org
 S:	Maintained
 F:	arch/xtensa/
 
+THERMAL
+M:      Zhang Rui <rui.zhang@intel.com>
+L:      linux-pm@vger.kernel.org
+T:      git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
+S:      Supported
+F:      drivers/thermal/
+F:      include/linux/thermal.h
+
 THINKPAD ACPI EXTRAS DRIVER
 M:	Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
 L:	ibm-acpi-devel@lists.sourceforge.net
@@ -7886,13 +7944,6 @@ M:	Roger Luethi <rl@hellgate.ch>
 S:	Maintained
 F:	drivers/net/ethernet/via/via-rhine.c
 
-VIAPRO SMBUS DRIVER
-M:	Jean Delvare <khali@linux-fr.org>
-L:	linux-i2c@vger.kernel.org
-S:	Maintained
-F:	Documentation/i2c/busses/i2c-viapro
-F:	drivers/i2c/busses/i2c-viapro.c
-
 VIA SD/MMC CARD CONTROLLER DRIVER
 M:	Bruce Chang <brucechang@via.com.tw>
 M:	Harald Welte <HaraldWelte@viatech.com>

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc6
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*

arch/arm/boot/Makefile

@@ -33,7 +33,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y)
 
 $(obj)/xipImage: vmlinux FORCE
 	$(call if_changed,objcopy)
-	$(kecho) '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
+	@$(kecho) '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
 
 $(obj)/Image $(obj)/zImage: FORCE
 	@echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
@@ -48,14 +48,14 @@ $(obj)/xipImage: FORCE
 
 $(obj)/Image: vmlinux FORCE
 	$(call if_changed,objcopy)
-	$(kecho) '  Kernel: $@ is ready'
+	@$(kecho) '  Kernel: $@ is ready'
 
 $(obj)/compressed/vmlinux: $(obj)/Image FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
 $(obj)/zImage:	$(obj)/compressed/vmlinux FORCE
 	$(call if_changed,objcopy)
-	$(kecho) '  Kernel: $@ is ready'
+	@$(kecho) '  Kernel: $@ is ready'
 
 endif
 
@@ -90,7 +90,7 @@ fi
 $(obj)/uImage:	$(obj)/zImage FORCE
 	@$(check_for_multiple_loadaddr)
 	$(call if_changed,uimage)
-	$(kecho) '  Image $@ is ready'
+	@$(kecho) '  Image $@ is ready'
 
 $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
@@ -98,7 +98,7 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
 
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
-	$(kecho) '  Kernel: $@ is ready'
+	@$(kecho) '  Kernel: $@ is ready'
 
 PHONY += initrd FORCE
 initrd:

arch/arm/boot/dts/tegra30.dtsi

@@ -73,8 +73,8 @@
 
 	pinmux: pinmux {
 		compatible = "nvidia,tegra30-pinmux";
-		reg = <0x70000868 0xd0    /* Pad control registers */
-		       0x70003000 0x3e0>; /* Mux registers */
+		reg = <0x70000868 0xd4    /* Pad control registers */
+		       0x70003000 0x3e4>; /* Mux registers */
 	};
 
 	serial@70006000 {

arch/arm/include/asm/io.h

@@ -64,7 +64,7 @@ extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
 static inline void __raw_writew(u16 val, volatile void __iomem *addr)
 {
 	asm volatile("strh %1, %0"
-		     : "+Qo" (*(volatile u16 __force *)addr)
+		     : "+Q" (*(volatile u16 __force *)addr)
 		     : "r" (val));
 }
 
@@ -72,7 +72,7 @@ static inline u16 __raw_readw(const volatile void __iomem *addr)
 {
 	u16 val;
 	asm volatile("ldrh %1, %0"
-		     : "+Qo" (*(volatile u16 __force *)addr),
+		     : "+Q" (*(volatile u16 __force *)addr),
 		       "=r" (val));
 	return val;
 }

arch/arm/include/asm/sched_clock.h

@@ -10,7 +10,5 @@
 
 extern void sched_clock_postinit(void);
 extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
-extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
-		unsigned long rate);
 
 #endif

arch/arm/include/asm/vfpmacros.h

@@ -27,9 +27,9 @@
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	ldceql	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
+	tst	\tmp, #HWCAP_VFPD32
+	ldcnel	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field
@@ -51,9 +51,9 @@
 #if __LINUX_ARM_ARCH__ <= 6
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
-	tst	\tmp, #HWCAP_VFPv3D16
-	stceql	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
-	addne	\base, \base, #32*4		    @ step over unused register space
+	tst	\tmp, #HWCAP_VFPD32
+	stcnel	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	addeq	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
 	and	\tmp, \tmp, #MVFR0_A_SIMD_MASK	    @ A_SIMD field

arch/arm/include/uapi/asm/hwcap.h

@@ -18,11 +18,12 @@
 #define HWCAP_THUMBEE	(1 << 11)
 #define HWCAP_NEON	(1 << 12)
 #define HWCAP_VFPv3	(1 << 13)
-#define HWCAP_VFPv3D16	(1 << 14)
+#define HWCAP_VFPv3D16	(1 << 14)	/* also set for VFPv4-D16 */
 #define HWCAP_TLS	(1 << 15)
 #define HWCAP_VFPv4	(1 << 16)
 #define HWCAP_IDIVA	(1 << 17)
 #define HWCAP_IDIVT	(1 << 18)
+#define HWCAP_VFPD32	(1 << 19)	/* set if VFP has 32 regs (not 16) */
 #define HWCAP_IDIV	(HWCAP_IDIVA | HWCAP_IDIVT)
 
 

arch/arm/kernel/sched_clock.c

@@ -107,13 +107,6 @@ static void sched_clock_poll(unsigned long wrap_ticks)
 	update_sched_clock();
 }
 
-void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
-		unsigned long rate)
-{
-	setup_sched_clock(read, bits, rate);
-	cd.needs_suspend = true;
-}
-
 void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
 {
 	unsigned long r, w;
@@ -189,18 +182,15 @@ void __init sched_clock_postinit(void)
 static int sched_clock_suspend(void)
 {
 	sched_clock_poll(sched_clock_timer.data);
-	if (cd.needs_suspend)
-		cd.suspended = true;
+	cd.suspended = true;
 	return 0;
 }
 
 static void sched_clock_resume(void)
 {
-	if (cd.needs_suspend) {
-		cd.epoch_cyc = read_sched_clock();
-		cd.epoch_cyc_copy = cd.epoch_cyc;
-		cd.suspended = false;
-	}
+	cd.epoch_cyc = read_sched_clock();
+	cd.epoch_cyc_copy = cd.epoch_cyc;
+	cd.suspended = false;
 }
 
 static struct syscore_ops sched_clock_ops = {

arch/arm/mach-at91/at91rm9200_devices.c

@@ -68,7 +68,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 

arch/arm/mach-at91/at91sam9260_devices.c

@@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 

arch/arm/mach-at91/at91sam9261_devices.c

@@ -72,7 +72,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 

arch/arm/mach-at91/at91sam9263_devices.c

@@ -78,7 +78,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data)
 
 	/* Enable overcurrent notification */
 	for (i = 0; i < data->ports; i++) {
-		if (data->overcurrent_pin[i])
+		if (gpio_is_valid(data->overcurrent_pin[i]))
 			at91_set_gpio_input(data->overcurrent_pin[i], 1);
 	}
 

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -1841,8 +1841,8 @@ static struct resource sha_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91SAM9G45_ID_AESTDESSHA,
-		.end	= AT91SAM9G45_ID_AESTDESSHA,
+		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -1874,8 +1874,8 @@ static struct resource tdes_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91SAM9G45_ID_AESTDESSHA,
-		.end	= AT91SAM9G45_ID_AESTDESSHA,
+		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -1910,8 +1910,8 @@ static struct resource aes_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= AT91SAM9G45_ID_AESTDESSHA,
-		.end	= AT91SAM9G45_ID_AESTDESSHA,
+		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
+		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

arch/arm/mach-highbank/system.c

@@ -28,6 +28,7 @@ void highbank_restart(char mode, const char *cmd)
 		hignbank_set_pwr_soft_reset();
 
 	scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
-	cpu_do_idle();
+	while (1)
+		cpu_do_idle();
 }
 

arch/arm/mach-imx/clk-gate2.c

@@ -112,7 +112,7 @@ struct clk *clk_register_gate2(struct device *dev, const char *name,
 
 	clk = clk_register(dev, &gate->hw);
 	if (IS_ERR(clk))
-		kfree(clk);
+		kfree(gate);
 
 	return clk;
 }

arch/arm/mach-imx/ehci-imx25.c

@@ -30,7 +30,7 @@
 #define MX25_H1_SIC_SHIFT	21
 #define MX25_H1_SIC_MASK	(0x3 << MX25_H1_SIC_SHIFT)
 #define MX25_H1_PP_BIT		(1 << 18)
-#define MX25_H1_PM_BIT		(1 << 8)
+#define MX25_H1_PM_BIT		(1 << 16)
 #define MX25_H1_IPPUE_UP_BIT	(1 << 7)
 #define MX25_H1_IPPUE_DOWN_BIT	(1 << 6)
 #define MX25_H1_TLL_BIT		(1 << 5)

arch/arm/mach-imx/ehci-imx35.c

@@ -30,7 +30,7 @@
 #define MX35_H1_SIC_SHIFT	21
 #define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
 #define MX35_H1_PP_BIT		(1 << 18)
-#define MX35_H1_PM_BIT		(1 << 8)
+#define MX35_H1_PM_BIT		(1 << 16)
 #define MX35_H1_IPPUE_UP_BIT	(1 << 7)
 #define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
 #define MX35_H1_TLL_BIT		(1 << 5)

arch/arm/mach-omap2/clockdomains44xx_data.c

@@ -359,7 +359,7 @@ static struct clockdomain iss_44xx_clkdm = {
 	.clkdm_offs	  = OMAP4430_CM2_CAM_CAM_CDOFFS,
 	.wkdep_srcs	  = iss_wkup_sleep_deps,
 	.sleepdep_srcs	  = iss_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain l3_dss_44xx_clkdm = {

arch/arm/mach-omap2/devices.c

@@ -19,6 +19,7 @@
 #include <linux/of.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/omap4-keypad.h>
+#include <linux/platform_data/omap_ocp2scp.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
@@ -613,6 +614,83 @@ static void omap_init_vout(void)
 static inline void omap_init_vout(void) {}
 #endif
 
+#if defined(CONFIG_OMAP_OCP2SCP) || defined(CONFIG_OMAP_OCP2SCP_MODULE)
+static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev)
+{
+	int cnt	= 0;
+
+	while (ocp2scp_dev->drv_name != NULL) {
+		cnt++;
+		ocp2scp_dev++;
+	}
+
+	return cnt;
+}
+
+static void omap_init_ocp2scp(void)
+{
+	struct omap_hwmod	*oh;
+	struct platform_device	*pdev;
+	int			bus_id = -1, dev_cnt = 0, i;
+	struct omap_ocp2scp_dev	*ocp2scp_dev;
+	const char		*oh_name, *name;
+	struct omap_ocp2scp_platform_data *pdata;
+
+	if (!cpu_is_omap44xx())
+		return;
+
+	oh_name = "ocp2scp_usb_phy";
+	name	= "omap-ocp2scp";
+
+	oh = omap_hwmod_lookup(oh_name);
+	if (!oh) {
+		pr_err("%s: could not find omap_hwmod for %s\n", __func__,
+								oh_name);
+		return;
+	}
+
+	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		pr_err("%s: No memory for ocp2scp pdata\n", __func__);
+		return;
+	}
+
+	ocp2scp_dev = oh->dev_attr;
+	dev_cnt = count_ocp2scp_devices(ocp2scp_dev);
+
+	if (!dev_cnt) {
+		pr_err("%s: No devices connected to ocp2scp\n", __func__);
+		kfree(pdata);
+		return;
+	}
+
+	pdata->devices = kzalloc(sizeof(struct omap_ocp2scp_dev *)
+					* dev_cnt, GFP_KERNEL);
+	if (!pdata->devices) {
+		pr_err("%s: No memory for ocp2scp pdata devices\n", __func__);
+		kfree(pdata);
+		return;
+	}
+
+	for (i = 0; i < dev_cnt; i++, ocp2scp_dev++)
+		pdata->devices[i] = ocp2scp_dev;
+
+	pdata->dev_cnt	= dev_cnt;
+
+	pdev = omap_device_build(name, bus_id, oh, pdata, sizeof(*pdata), NULL,
+								0, false);
+	if (IS_ERR(pdev)) {
+		pr_err("Could not build omap_device for %s %s\n",
+						name, oh_name);
+		kfree(pdata->devices);
+		kfree(pdata);
+		return;
+	}
+}
+#else
+static inline void omap_init_ocp2scp(void) { }
+#endif
+
 /*-------------------------------------------------------------------------*/
 
 static int __init omap2_init_devices(void)
@@ -640,6 +718,7 @@ static int __init omap2_init_devices(void)
 	omap_init_sham();
 	omap_init_aes();
 	omap_init_vout();
+	omap_init_ocp2scp();
 
 	return 0;
 }

arch/arm/mach-omap2/omap_hwmod.c

@@ -421,6 +421,38 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v)
 	return 0;
 }
 
+/**
+ * _wait_softreset_complete - wait for an OCP softreset to complete
+ * @oh: struct omap_hwmod * to wait on
+ *
+ * Wait until the IP block represented by @oh reports that its OCP
+ * softreset is complete.  This can be triggered by software (see
+ * _ocp_softreset()) or by hardware upon returning from off-mode (one
+ * example is HSMMC).  Waits for up to MAX_MODULE_SOFTRESET_WAIT
+ * microseconds.  Returns the number of microseconds waited.
+ */
+static int _wait_softreset_complete(struct omap_hwmod *oh)
+{
+	struct omap_hwmod_class_sysconfig *sysc;
+	u32 softrst_mask;
+	int c = 0;
+
+	sysc = oh->class->sysc;
+
+	if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
+		omap_test_timeout((omap_hwmod_read(oh, sysc->syss_offs)
+				   & SYSS_RESETDONE_MASK),
+				  MAX_MODULE_SOFTRESET_WAIT, c);
+	else if (sysc->sysc_flags & SYSC_HAS_RESET_STATUS) {
+		softrst_mask = (0x1 << sysc->sysc_fields->srst_shift);
+		omap_test_timeout(!(omap_hwmod_read(oh, sysc->sysc_offs)
+				    & softrst_mask),
+				  MAX_MODULE_SOFTRESET_WAIT, c);
+	}
+
+	return c;
+}
+
 /**
  * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v
  * @oh: struct omap_hwmod *
@@ -1282,6 +1314,18 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	if (!oh->class->sysc)
 		return;
 
+	/*
+	 * Wait until reset has completed, this is needed as the IP
+	 * block is reset automatically by hardware in some cases
+	 * (off-mode for example), and the drivers require the
+	 * IP to be ready when they access it
+	 */
+	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+		_enable_optional_clocks(oh);
+	_wait_softreset_complete(oh);
+	if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
+		_disable_optional_clocks(oh);
+
 	v = oh->_sysc_cache;
 	sf = oh->class->sysc->sysc_flags;
 
@@ -1804,7 +1848,7 @@ static int _am33xx_disable_module(struct omap_hwmod *oh)
  */
 static int _ocp_softreset(struct omap_hwmod *oh)
 {
-	u32 v, softrst_mask;
+	u32 v;
 	int c = 0;
 	int ret = 0;
 
@@ -1834,19 +1878,7 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 	if (oh->class->sysc->srst_udelay)
 		udelay(oh->class->sysc->srst_udelay);
 
-	if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
-		omap_test_timeout((omap_hwmod_read(oh,
-						    oh->class->sysc->syss_offs)
-				   & SYSS_RESETDONE_MASK),
-				  MAX_MODULE_SOFTRESET_WAIT, c);
-	else if (oh->class->sysc->sysc_flags & SYSC_HAS_RESET_STATUS) {
-		softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
-		omap_test_timeout(!(omap_hwmod_read(oh,
-						     oh->class->sysc->sysc_offs)
-				   & softrst_mask),
-				  MAX_MODULE_SOFTRESET_WAIT, c);
-	}
-
+	c = _wait_softreset_complete(oh);
 	if (c == MAX_MODULE_SOFTRESET_WAIT)
 		pr_warning("omap_hwmod: %s: softreset failed (waited %d usec)\n",
 			   oh->name, MAX_MODULE_SOFTRESET_WAIT);
@@ -2352,6 +2384,9 @@ static int __init _setup_reset(struct omap_hwmod *oh)
 	if (oh->_state != _HWMOD_STATE_INITIALIZED)
 		return -EINVAL;
 
+	if (oh->flags & HWMOD_EXT_OPT_MAIN_CLK)
+		return -EPERM;
+
 	if (oh->rst_lines_cnt == 0) {
 		r = _enable(oh);
 		if (r) {

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -21,6 +21,7 @@
 #include <linux/io.h>
 #include <linux/platform_data/gpio-omap.h>
 #include <linux/power/smartreflex.h>
+#include <linux/platform_data/omap_ocp2scp.h>
 
 #include <plat/omap_hwmod.h>
 #include <plat/i2c.h>
@@ -2125,6 +2126,14 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
 	.name		= "mcpdm",
 	.class		= &omap44xx_mcpdm_hwmod_class,
 	.clkdm_name	= "abe_clkdm",
+	/*
+	 * It's suspected that the McPDM requires an off-chip main
+	 * functional clock, controlled via I2C.  This IP block is
+	 * currently reset very early during boot, before I2C is
+	 * available, so it doesn't seem that we have any choice in
+	 * the kernel other than to avoid resetting it.
+	 */
+	.flags		= HWMOD_EXT_OPT_MAIN_CLK,
 	.mpu_irqs	= omap44xx_mcpdm_irqs,
 	.sdma_reqs	= omap44xx_mcpdm_sdma_reqs,
 	.main_clk	= "mcpdm_fck",
@@ -2681,6 +2690,32 @@ static struct omap_hwmod_class omap44xx_ocp2scp_hwmod_class = {
 	.sysc	= &omap44xx_ocp2scp_sysc,
 };
 
+/* ocp2scp dev_attr */
+static struct resource omap44xx_usb_phy_and_pll_addrs[] = {
+	{
+		.name		= "usb_phy",
+		.start		= 0x4a0ad080,
+		.end		= 0x4a0ae000,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		/* XXX: Remove this once control module driver is in place */
+		.name		= "ctrl_dev",
+		.start		= 0x4a002300,
+		.end		= 0x4a002303,
+		.flags		= IORESOURCE_MEM,
+	},
+	{ }
+};
+
+static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = {
+	{
+		.drv_name       = "omap-usb2",
+		.res		= omap44xx_usb_phy_and_pll_addrs,
+	},
+	{ }
+};
+
 /* ocp2scp_usb_phy */
 static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
 	.name		= "ocp2scp_usb_phy",
@@ -2694,6 +2729,7 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
 			.modulemode   = MODULEMODE_HWCTRL,
 		},
 	},
+	.dev_attr	= ocp2scp_dev_attr,
 };
 
 /*

arch/arm/mach-omap2/twl-common.c

@@ -366,7 +366,7 @@ static struct regulator_init_data omap4_clk32kg_idata = {
 };
 
 static struct regulator_consumer_supply omap4_vdd1_supply[] = {
-	REGULATOR_SUPPLY("vcc", "mpu.0"),
+	REGULATOR_SUPPLY("vcc", "cpu0"),
 };
 
 static struct regulator_consumer_supply omap4_vdd2_supply[] = {

arch/arm/mach-omap2/vc.c

@@ -264,7 +264,7 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
 
 	if (initialized) {
 		if (voltdm->pmic->i2c_high_speed != i2c_high_speed)
-			pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).",
+			pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).\n",
 				__func__, voltdm->name, i2c_high_speed);
 		return;
 	}

arch/arm/mach-pxa/hx4700.c

@@ -28,6 +28,7 @@
 #include <linux/mfd/asic3.h>
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
+#include <linux/pwm.h>
 #include <linux/pwm_backlight.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/gpio-regulator.h>
@@ -556,7 +557,7 @@ static struct platform_device hx4700_lcd = {
  */
 
 static struct platform_pwm_backlight_data backlight_data = {
-	.pwm_id         = 1,
+	.pwm_id         = -1,	/* Superseded by pwm_lookup */
 	.max_brightness = 200,
 	.dft_brightness = 100,
 	.pwm_period_ns  = 30923,
@@ -571,6 +572,10 @@ static struct platform_device backlight = {
 	},
 };
 
+static struct pwm_lookup hx4700_pwm_lookup[] = {
+	PWM_LOOKUP("pxa27x-pwm.1", 0, "pwm-backlight", NULL),
+};
+
 /*
  * USB "Transceiver"
  */
@@ -872,6 +877,7 @@ static void __init hx4700_init(void)
 	pxa_set_stuart_info(NULL);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
 
 	pxa_set_ficp_info(&ficp_info);
 	pxa27x_set_i2c_power_info(NULL);

arch/arm/mach-pxa/spitz_pm.c

@@ -86,10 +86,7 @@ static void spitz_discharge1(int on)
 	gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
 }
 
-static unsigned long gpio18_config[] = {
-	GPIO18_RDY,
-	GPIO18_GPIO,
-};
+static unsigned long gpio18_config = GPIO18_GPIO;
 
 static void spitz_presuspend(void)
 {
@@ -112,7 +109,7 @@ static void spitz_presuspend(void)
 	PGSR3 &= ~SPITZ_GPIO_G3_STROBE_BIT;
 	PGSR2 |= GPIO_bit(SPITZ_GPIO_KEY_STROBE0);
 
-	pxa2xx_mfp_config(&gpio18_config[0], 1);
+	pxa2xx_mfp_config(&gpio18_config, 1);
 	gpio_request_one(18, GPIOF_OUT_INIT_HIGH, "Unknown");
 	gpio_free(18);
 
@@ -131,7 +128,6 @@ static void spitz_presuspend(void)
 
 static void spitz_postsuspend(void)
 {
-	pxa2xx_mfp_config(&gpio18_config[1], 1);
 }
 
 static int spitz_should_wakeup(unsigned int resume_on_alarm)

arch/arm/mm/alignment.c

@@ -745,7 +745,7 @@ do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs,
 static int
 do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
-	union offset_union offset;
+	union offset_union uninitialized_var(offset);
 	unsigned long instr = 0, instrptr;
 	int (*handler)(unsigned long addr, unsigned long instr, struct pt_regs *regs);
 	unsigned int type;

arch/arm/plat-omap/include/plat/omap_hwmod.h

@@ -443,6 +443,11 @@ struct omap_hwmod_omap4_prcm {
  *     in order to complete the reset. Optional clocks will be disabled
  *     again after the reset.
  * HWMOD_16BIT_REG: Module has 16bit registers
+ * HWMOD_EXT_OPT_MAIN_CLK: The only main functional clock source for
+ *     this IP block comes from an off-chip source and is not always
+ *     enabled.  This prevents the hwmod code from being able to
+ *     enable and reset the IP block early.  XXX Eventually it should
+ *     be possible to query the clock framework for this information.
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
@@ -453,6 +458,7 @@ struct omap_hwmod_omap4_prcm {
 #define HWMOD_NO_IDLEST				(1 << 6)
 #define HWMOD_CONTROL_OPT_CLKS_IN_RESET		(1 << 7)
 #define HWMOD_16BIT_REG				(1 << 8)
+#define HWMOD_EXT_OPT_MAIN_CLK			(1 << 9)
 
 /*
  * omap_hwmod._int_flags definitions

arch/arm/tools/Makefile

@@ -5,6 +5,6 @@
 #
 
 include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types
-	$(kecho) '  Generating $@'
+	@$(kecho) '  Generating $@'
 	@mkdir -p $(dir $@)
 	$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }

arch/arm/vfp/vfpmodule.c

@@ -701,11 +701,14 @@ static int __init vfp_init(void)
 			elf_hwcap |= HWCAP_VFPv3;
 
 			/*
-			 * Check for VFPv3 D16. CPUs in this configuration
-			 * only have 16 x 64bit registers.
+			 * Check for VFPv3 D16 and VFPv4 D16.  CPUs in
+			 * this configuration only have 16 x 64bit
+			 * registers.
 			 */
 			if (((fmrx(MVFR0) & MVFR0_A_SIMD_MASK)) == 1)
-				elf_hwcap |= HWCAP_VFPv3D16;
+				elf_hwcap |= HWCAP_VFPv3D16; /* also v4-D16 */
+			else
+				elf_hwcap |= HWCAP_VFPD32;
 		}
 #endif
 		/*

arch/arm/xen/enlighten.c

@@ -166,3 +166,14 @@ void free_xenballooned_pages(int nr_pages, struct page **pages)
 	*pages = NULL;
 }
 EXPORT_SYMBOL_GPL(free_xenballooned_pages);
+
+/* In the hypervisor.S file. */
+EXPORT_SYMBOL_GPL(HYPERVISOR_event_channel_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_grant_table_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_xen_version);
+EXPORT_SYMBOL_GPL(HYPERVISOR_console_io);
+EXPORT_SYMBOL_GPL(HYPERVISOR_sched_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_hvm_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_memory_op);
+EXPORT_SYMBOL_GPL(HYPERVISOR_physdev_op);
+EXPORT_SYMBOL_GPL(privcmd_call);

arch/arm/xen/hypercall.S

@@ -48,20 +48,16 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
+#include <asm/opcodes-virt.h>
 #include <xen/interface/xen.h>
 
 
-/* HVC 0xEA1 */
-#ifdef CONFIG_THUMB2_KERNEL
-#define xen_hvc .word 0xf7e08ea1
-#else
-#define xen_hvc .word 0xe140ea71
-#endif
+#define XEN_IMM 0xEA1
 
 #define HYPERCALL_SIMPLE(hypercall)		\
 ENTRY(HYPERVISOR_##hypercall)			\
 	mov r12, #__HYPERVISOR_##hypercall;	\
-	xen_hvc;							\
+	__HVC(XEN_IMM);						\
 	mov pc, lr;							\
 ENDPROC(HYPERVISOR_##hypercall)
 
@@ -76,7 +72,7 @@ ENTRY(HYPERVISOR_##hypercall)			\
 	stmdb sp!, {r4}						\
 	ldr r4, [sp, #4]					\
 	mov r12, #__HYPERVISOR_##hypercall;	\
-	xen_hvc								\
+	__HVC(XEN_IMM);						\
 	ldm sp!, {r4}						\
 	mov pc, lr							\
 ENDPROC(HYPERVISOR_##hypercall)
@@ -100,7 +96,7 @@ ENTRY(privcmd_call)
 	mov r2, r3
 	ldr r3, [sp, #8]
 	ldr r4, [sp, #4]
-	xen_hvc
+	__HVC(XEN_IMM)
 	ldm sp!, {r4}
 	mov pc, lr
 ENDPROC(privcmd_call);

arch/arm64/Kconfig

@@ -1,6 +1,7 @@
 config ARM64
 	def_bool y
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_HARDIRQS_NO_DEPRECATED
 	select GENERIC_IOMAP

arch/arm64/include/asm/elf.h

@@ -25,12 +25,10 @@
 #include <asm/user.h>
 
 typedef unsigned long elf_greg_t;
-typedef unsigned long elf_freg_t[3];
 
 #define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];
-
-typedef struct user_fp elf_fpregset_t;
+typedef struct user_fpsimd_state elf_fpregset_t;
 
 #define EM_AARCH64		183
 
@@ -87,7 +85,6 @@ typedef struct user_fp elf_fpregset_t;
 #define R_AARCH64_MOVW_PREL_G2_NC	292
 #define R_AARCH64_MOVW_PREL_G3		293
 
-
 /*
  * These are used to set parameters in the core dumps.
  */

arch/arm64/include/asm/fpsimd.h

@@ -25,9 +25,8 @@
  *  - FPSR and FPCR
  *  - 32 128-bit data registers
  *
- * Note that user_fp forms a prefix of this structure, which is relied
- * upon in the ptrace FP/SIMD accessors. struct user_fpsimd_state must
- * form a prefix of struct fpsimd_state.
+ * Note that user_fpsimd forms a prefix of this structure, which is
+ * relied upon in the ptrace FP/SIMD accessors.
  */
 struct fpsimd_state {
 	union {

arch/arm64/include/asm/io.h

@@ -114,7 +114,7 @@ static inline u64 __raw_readq(const volatile void __iomem *addr)
  *  I/O port access primitives.
  */
 #define IO_SPACE_LIMIT		0xffff
-#define PCI_IOBASE		((void __iomem *)0xffffffbbfffe0000UL)
+#define PCI_IOBASE		((void __iomem *)(MODULES_VADDR - SZ_2M))
 
 static inline u8 inb(unsigned long addr)
 {
@@ -222,12 +222,12 @@ extern void __iomem *__ioremap(phys_addr_t phys_addr, size_t size, pgprot_t prot
 extern void __iounmap(volatile void __iomem *addr);
 
 #define PROT_DEFAULT		(PTE_TYPE_PAGE | PTE_AF | PTE_DIRTY)
-#define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_XN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
+#define PROT_DEVICE_nGnRE	(PROT_DEFAULT | PTE_PXN | PTE_UXN | PTE_ATTRINDX(MT_DEVICE_nGnRE))
 #define PROT_NORMAL_NC		(PROT_DEFAULT | PTE_ATTRINDX(MT_NORMAL_NC))
 
-#define ioremap(addr, size)		__ioremap((addr), (size), PROT_DEVICE_nGnRE)
-#define ioremap_nocache(addr, size)	__ioremap((addr), (size), PROT_DEVICE_nGnRE)
-#define ioremap_wc(addr, size)		__ioremap((addr), (size), PROT_NORMAL_NC)
+#define ioremap(addr, size)		__ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
+#define ioremap_nocache(addr, size)	__ioremap((addr), (size), __pgprot(PROT_DEVICE_nGnRE))
+#define ioremap_wc(addr, size)		__ioremap((addr), (size), __pgprot(PROT_NORMAL_NC))
 #define iounmap				__iounmap
 
 #define ARCH_HAS_IOREMAP_WC

arch/arm64/include/asm/pgtable-hwdef.h

@@ -38,7 +38,8 @@
 #define PMD_SECT_S		(_AT(pmdval_t, 3) << 8)
 #define PMD_SECT_AF		(_AT(pmdval_t, 1) << 10)
 #define PMD_SECT_NG		(_AT(pmdval_t, 1) << 11)
-#define PMD_SECT_XN		(_AT(pmdval_t, 1) << 54)
+#define PMD_SECT_PXN		(_AT(pmdval_t, 1) << 53)
+#define PMD_SECT_UXN		(_AT(pmdval_t, 1) << 54)
 
 /*
  * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).
@@ -57,7 +58,8 @@
 #define PTE_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */
 #define PTE_AF			(_AT(pteval_t, 1) << 10)	/* Access Flag */
 #define PTE_NG			(_AT(pteval_t, 1) << 11)	/* nG */
-#define PTE_XN			(_AT(pteval_t, 1) << 54)	/* XN */
+#define PTE_PXN			(_AT(pteval_t, 1) << 53)	/* Privileged XN */
+#define PTE_UXN			(_AT(pteval_t, 1) << 54)	/* User XN */
 
 /*
  * AttrIndx[2:0] encoding (mapping attributes defined in the MAIR* registers).

arch/arm64/include/asm/pgtable.h

@@ -62,23 +62,23 @@ extern pgprot_t pgprot_default;
 
 #define _MOD_PROT(p, b)	__pgprot(pgprot_val(p) | (b))
 
-#define PAGE_NONE		_MOD_PROT(pgprot_default, PTE_NG | PTE_XN | PTE_RDONLY)
-#define PAGE_SHARED		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN)
-#define PAGE_SHARED_EXEC	_MOD_PROT(pgprot_default, PTE_USER | PTE_NG)
-#define PAGE_COPY		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define PAGE_COPY_EXEC		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_RDONLY)
-#define PAGE_READONLY		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define PAGE_READONLY_EXEC	_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_RDONLY)
-#define PAGE_KERNEL		_MOD_PROT(pgprot_default, PTE_XN | PTE_DIRTY)
-#define PAGE_KERNEL_EXEC	_MOD_PROT(pgprot_default, PTE_DIRTY)
+#define PAGE_NONE		_MOD_PROT(pgprot_default, PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define PAGE_SHARED		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
+#define PAGE_SHARED_EXEC	_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN)
+#define PAGE_COPY		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define PAGE_COPY_EXEC		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
+#define PAGE_READONLY		_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define PAGE_READONLY_EXEC	_MOD_PROT(pgprot_default, PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
+#define PAGE_KERNEL		_MOD_PROT(pgprot_default, PTE_PXN | PTE_UXN | PTE_DIRTY)
+#define PAGE_KERNEL_EXEC	_MOD_PROT(pgprot_default, PTE_UXN | PTE_DIRTY)
 
-#define __PAGE_NONE		__pgprot(_PAGE_DEFAULT | PTE_NG | PTE_XN | PTE_RDONLY)
-#define __PAGE_SHARED		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN)
-#define __PAGE_SHARED_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG)
-#define __PAGE_COPY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define __PAGE_COPY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_RDONLY)
-#define __PAGE_READONLY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_XN | PTE_RDONLY)
-#define __PAGE_READONLY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_RDONLY)
+#define __PAGE_NONE		__pgprot(_PAGE_DEFAULT | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define __PAGE_SHARED		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN)
+#define __PAGE_SHARED_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN)
+#define __PAGE_COPY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define __PAGE_COPY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
+#define __PAGE_READONLY		__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_UXN | PTE_RDONLY)
+#define __PAGE_READONLY_EXEC	__pgprot(_PAGE_DEFAULT | PTE_USER | PTE_NG | PTE_PXN | PTE_RDONLY)
 
 #endif /* __ASSEMBLY__ */
 
@@ -130,10 +130,10 @@ extern struct page *empty_zero_page;
 #define pte_young(pte)		(pte_val(pte) & PTE_AF)
 #define pte_special(pte)	(pte_val(pte) & PTE_SPECIAL)
 #define pte_write(pte)		(!(pte_val(pte) & PTE_RDONLY))
-#define pte_exec(pte)		(!(pte_val(pte) & PTE_XN))
+#define pte_exec(pte)		(!(pte_val(pte) & PTE_UXN))
 
 #define pte_present_exec_user(pte) \
-	((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_XN)) == \
+	((pte_val(pte) & (PTE_VALID | PTE_USER | PTE_UXN)) == \
 	 (PTE_VALID | PTE_USER))
 
 #define PTE_BIT_FUNC(fn,op) \
@@ -262,7 +262,7 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
 
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 {
-	const pteval_t mask = PTE_USER | PTE_XN | PTE_RDONLY;
+	const pteval_t mask = PTE_USER | PTE_PXN | PTE_UXN | PTE_RDONLY;
 	pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
 	return pte;
 }

arch/arm64/include/asm/processor.h

@@ -43,6 +43,8 @@
 #else
 #define STACK_TOP		STACK_TOP_MAX
 #endif /* CONFIG_COMPAT */
+
+#define ARCH_LOW_ADDRESS_LIMIT	PHYS_MASK
 #endif /* __KERNEL__ */
 
 struct debug_info {

arch/arm64/include/asm/unistd.h

@@ -14,7 +14,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #ifdef CONFIG_COMPAT
-#define __ARCH_WANT_COMPAT_IPC_PARSE_VERSION
 #define __ARCH_WANT_COMPAT_STAT64
 #define __ARCH_WANT_SYS_GETHOSTNAME
 #define __ARCH_WANT_SYS_PAUSE

arch/arm64/kernel/perf_event.c

@@ -613,17 +613,11 @@ enum armv8_pmuv3_perf_types {
 	ARMV8_PMUV3_PERFCTR_BUS_ACCESS				= 0x19,
 	ARMV8_PMUV3_PERFCTR_MEM_ERROR				= 0x1A,
 	ARMV8_PMUV3_PERFCTR_BUS_CYCLES				= 0x1D,
-
-	/*
-	 * This isn't an architected event.
-	 * We detect this event number and use the cycle counter instead.
-	 */
-	ARMV8_PMUV3_PERFCTR_CPU_CYCLES				= 0xFF,
 };
 
 /* PMUv3 HW events mapping. */
 static const unsigned armv8_pmuv3_perf_map[PERF_COUNT_HW_MAX] = {
-	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV8_PMUV3_PERFCTR_CPU_CYCLES,
+	[PERF_COUNT_HW_CPU_CYCLES]		= ARMV8_PMUV3_PERFCTR_CLOCK_CYCLES,
 	[PERF_COUNT_HW_INSTRUCTIONS]		= ARMV8_PMUV3_PERFCTR_INSTR_EXECUTED,
 	[PERF_COUNT_HW_CACHE_REFERENCES]	= ARMV8_PMUV3_PERFCTR_L1_DCACHE_ACCESS,
 	[PERF_COUNT_HW_CACHE_MISSES]		= ARMV8_PMUV3_PERFCTR_L1_DCACHE_REFILL,
@@ -1106,7 +1100,7 @@ static int armv8pmu_get_event_idx(struct pmu_hw_events *cpuc,
 	unsigned long evtype = event->config_base & ARMV8_EVTYPE_EVENT;
 
 	/* Always place a cycle counter into the cycle counter. */
-	if (evtype == ARMV8_PMUV3_PERFCTR_CPU_CYCLES) {
+	if (evtype == ARMV8_PMUV3_PERFCTR_CLOCK_CYCLES) {
 		if (test_and_set_bit(ARMV8_IDX_CYCLE_COUNTER, cpuc->used_mask))
 			return -EAGAIN;
 

arch/arm64/kernel/process.c

@@ -309,24 +309,6 @@ struct task_struct *__switch_to(struct task_struct *prev,
 	return last;
 }
 
-/*
- * Fill in the task's elfregs structure for a core dump.
- */
-int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
-{
-	elf_core_copy_regs(elfregs, task_pt_regs(t));
-	return 1;
-}
-
-/*
- * fill in the fpe structure for a core dump...
- */
-int dump_fpu (struct pt_regs *regs, struct user_fp *fp)
-{
-	return 0;
-}
-EXPORT_SYMBOL(dump_fpu);
-
 /*
  * Shuffle the argument into the correct register before calling the
  * thread function.  x1 is the thread argument, x2 is the pointer to

arch/arm64/kernel/smp.c

@@ -211,8 +211,7 @@ asmlinkage void __cpuinit secondary_start_kernel(void)
 	 * before we continue.
 	 */
 	set_cpu_online(cpu, true);
-	while (!cpu_active(cpu))
-		cpu_relax();
+	complete(&cpu_running);
 
 	/*
 	 * OK, it's off to the idle thread for us

arch/arm64/mm/init.c

@@ -80,7 +80,7 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
 #ifdef CONFIG_ZONE_DMA32
 	/* 4GB maximum for 32-bit only capable devices */
 	max_dma32 = min(max, MAX_DMA32_PFN);
-	zone_size[ZONE_DMA32] = max_dma32 - min;
+	zone_size[ZONE_DMA32] = max(min, max_dma32) - min;
 #endif
 	zone_size[ZONE_NORMAL] = max - max_dma32;
 

arch/frv/Kconfig

@@ -13,6 +13,7 @@ config FRV
 	select GENERIC_CPU_DEVICES
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select GENERIC_KERNEL_THREAD
+	select GENERIC_KERNEL_EXECVE
 
 config ZONE_DMA
 	bool

arch/frv/boot/Makefile

@@ -17,6 +17,8 @@ PARAMS_PHYS	 = 0x0207c000
 INITRD_PHYS	 = 0x02180000
 INITRD_VIRT	 = 0x02180000
 
+OBJCOPYFLAGS	:=-O binary -R .note -R .note.gnu.build-id -R .comment
+
 #
 # If you don't define ZRELADDR above,
 # then it defaults to ZTEXTADDR
@@ -32,18 +34,18 @@ Image: $(obj)/Image
 targets: $(obj)/Image
 
 $(obj)/Image: vmlinux FORCE
-	$(OBJCOPY) -O binary -R .note -R .comment -S vmlinux $@
+	$(OBJCOPY) $(OBJCOPYFLAGS) -S vmlinux $@
 
 #$(obj)/Image:	$(CONFIGURE) $(SYSTEM)
-#	$(OBJCOPY) -O binary -R .note -R .comment -g -S $(SYSTEM) $@
+#	$(OBJCOPY) $(OBJCOPYFLAGS) -g -S $(SYSTEM) $@
 
 bzImage: zImage
 
 zImage:	$(CONFIGURE) compressed/$(LINUX)
-	$(OBJCOPY) -O binary -R .note -R .comment -S compressed/$(LINUX) $@
+	$(OBJCOPY) $(OBJCOPYFLAGS) -S compressed/$(LINUX) $@
 
 bootpImage: bootp/bootp
-	$(OBJCOPY) -O binary -R .note -R .comment -S bootp/bootp $@
+	$(OBJCOPY) $(OBJCOPYFLAGS) -S bootp/bootp $@
 
 compressed/$(LINUX): $(LINUX) dep
 	@$(MAKE) -C compressed $(LINUX)

arch/frv/include/asm/unistd.h

@@ -30,7 +30,6 @@
 #define __ARCH_WANT_SYS_RT_SIGACTION
 #define __ARCH_WANT_SYS_RT_SIGSUSPEND
 #define __ARCH_WANT_SYS_EXECVE
-#define __ARCH_WANT_KERNEL_EXECVE
 
 /*
  * "Conditional" syscalls

arch/frv/kernel/entry.S

@@ -869,11 +869,6 @@ ret_from_kernel_thread:
 	call		schedule_tail
 	calll.p		@(gr21,gr0)
 	or		gr20,gr20,gr8
-	bra		sys_exit
-
-	.globl		ret_from_kernel_execve
-ret_from_kernel_execve:
-	ori		gr28,0,sp
 	bra		__syscall_exit
 
 ###################################################################################################
@@ -1080,27 +1075,10 @@ __entry_return_from_kernel_interrupt:
 	subicc		gr5,#0,gr0,icc0
 	beq		icc0,#0,__entry_return_direct
 
-__entry_preempt_need_resched:
-	ldi		@(gr15,#TI_FLAGS),gr4
-	andicc		gr4,#_TIF_NEED_RESCHED,gr0,icc0
-	beq		icc0,#1,__entry_return_direct
-
-	setlos		#PREEMPT_ACTIVE,gr5
-	sti		gr5,@(gr15,#TI_FLAGS)
-
-	andi		gr23,#~PSR_PIL,gr23
-	movgs		gr23,psr
-
-	call		schedule
-	sti		gr0,@(gr15,#TI_PRE_COUNT)
-
-	movsg		psr,gr23
-	ori		gr23,#PSR_PIL_14,gr23
-	movgs		gr23,psr
-	bra		__entry_preempt_need_resched
-#else
-	bra		__entry_return_direct
+	subcc		gr0,gr0,gr0,icc2		/* set Z and clear C */
+	call		preempt_schedule_irq
 #endif
+	bra		__entry_return_direct
 
 
 ###############################################################################

arch/frv/kernel/process.c

@@ -181,6 +181,9 @@ int copy_thread(unsigned long clone_flags,
 	childregs = (struct pt_regs *)
 		(task_stack_page(p) + THREAD_SIZE - FRV_FRAME0_SIZE);
 
+	/* set up the userspace frame (the only place that the USP is stored) */
+	*childregs = *__kernel_frame0_ptr;
+
 	p->set_child_tid = p->clear_child_tid = NULL;
 
 	p->thread.frame	 = childregs;
@@ -191,10 +194,8 @@ int copy_thread(unsigned long clone_flags,
 	p->thread.frame0 = childregs;
 
 	if (unlikely(!regs)) {
-		memset(childregs, 0, sizeof(struct pt_regs));
 		childregs->gr9 = usp; /* function */
 		childregs->gr8 = arg;
-		childregs->psr = PSR_S;
 		p->thread.pc = (unsigned long) ret_from_kernel_thread;
 		save_user_regs(p->thread.user);
 		return 0;

arch/frv/mb93090-mb00/pci-dma-nommu.c

@@ -11,6 +11,7 @@
 
 #include <linux/types.h>
 #include <linux/slab.h>
+#include <linux/export.h>
 #include <linux/dma-mapping.h>
 #include <linux/list.h>
 #include <linux/pci.h>

arch/h8300/include/asm/cache.h

@@ -2,7 +2,8 @@
 #define __ARCH_H8300_CACHE_H
 
 /* bytes per L1 cache line */
-#define        L1_CACHE_BYTES  4
+#define        L1_CACHE_SHIFT  2
+#define        L1_CACHE_BYTES  (1 << L1_CACHE_SHIFT)
 
 /* m68k-elf-gcc  2.95.2 doesn't like these */
 

arch/ia64/mm/init.c

@@ -637,7 +637,6 @@ mem_init (void)
 
 	high_memory = __va(max_low_pfn * PAGE_SIZE);
 
-	reset_zone_present_pages();
 	for_each_online_pgdat(pgdat)
 		if (pgdat->bdata->node_bootmem_map)
 			totalram_pages += free_all_bootmem_node(pgdat);

arch/mips/cavium-octeon/executive/cvmx-l2c.c

@@ -30,6 +30,7 @@
  * measurement, and debugging facilities.
  */
 
+#include <linux/irqflags.h>
 #include <asm/octeon/cvmx.h>
 #include <asm/octeon/cvmx-l2c.h>
 #include <asm/octeon/cvmx-spinlock.h>

arch/mips/fw/arc/misc.c

@@ -11,6 +11,7 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/irqflags.h>
 
 #include <asm/bcache.h>
 

arch/mips/include/asm/bitops.h

@@ -14,7 +14,6 @@
 #endif
 
 #include <linux/compiler.h>
-#include <linux/irqflags.h>
 #include <linux/types.h>
 #include <asm/barrier.h>
 #include <asm/byteorder.h>		/* sigh ... */
@@ -44,6 +43,24 @@
 #define smp_mb__before_clear_bit()	smp_mb__before_llsc()
 #define smp_mb__after_clear_bit()	smp_llsc_mb()
 
+
+/*
+ * These are the "slower" versions of the functions and are in bitops.c.
+ * These functions call raw_local_irq_{save,restore}().
+ */
+void __mips_set_bit(unsigned long nr, volatile unsigned long *addr);
+void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr);
+void __mips_change_bit(unsigned long nr, volatile unsigned long *addr);
+int __mips_test_and_set_bit(unsigned long nr,
+			    volatile unsigned long *addr);
+int __mips_test_and_set_bit_lock(unsigned long nr,
+				 volatile unsigned long *addr);
+int __mips_test_and_clear_bit(unsigned long nr,
+			      volatile unsigned long *addr);
+int __mips_test_and_change_bit(unsigned long nr,
+			       volatile unsigned long *addr);
+
+
 /*
  * set_bit - Atomically set a bit in memory
  * @nr: the bit to set
@@ -57,7 +74,7 @@
 static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 	unsigned long temp;
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
@@ -92,17 +109,8 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 			: "=&r" (temp), "+m" (*m)
 			: "ir" (1UL << bit));
 		} while (unlikely(!temp));
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		*a |= mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		__mips_set_bit(nr, addr);
 }
 
 /*
@@ -118,7 +126,7 @@ static inline void set_bit(unsigned long nr, volatile unsigned long *addr)
 static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 {
 	unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 	unsigned long temp;
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
@@ -153,17 +161,8 @@ static inline void clear_bit(unsigned long nr, volatile unsigned long *addr)
 			: "=&r" (temp), "+m" (*m)
 			: "ir" (~(1UL << bit)));
 		} while (unlikely(!temp));
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		*a &= ~mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		__mips_clear_bit(nr, addr);
 }
 
 /*
@@ -191,7 +190,7 @@ static inline void clear_bit_unlock(unsigned long nr, volatile unsigned long *ad
  */
 static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 {
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
 		unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG);
@@ -220,17 +219,8 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 			: "=&r" (temp), "+m" (*m)
 			: "ir" (1UL << bit));
 		} while (unlikely(!temp));
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		*a ^= mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		__mips_change_bit(nr, addr);
 }
 
 /*
@@ -244,7 +234,7 @@ static inline void change_bit(unsigned long nr, volatile unsigned long *addr)
 static inline int test_and_set_bit(unsigned long nr,
 	volatile unsigned long *addr)
 {
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 	unsigned long res;
 
 	smp_mb__before_llsc();
@@ -281,18 +271,8 @@ static inline int test_and_set_bit(unsigned long nr,
 		} while (unlikely(!res));
 
 		res = temp & (1UL << bit);
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		res = (mask & *a);
-		*a |= mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		res = __mips_test_and_set_bit(nr, addr);
 
 	smp_llsc_mb();
 
@@ -310,7 +290,7 @@ static inline int test_and_set_bit(unsigned long nr,
 static inline int test_and_set_bit_lock(unsigned long nr,
 	volatile unsigned long *addr)
 {
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 	unsigned long res;
 
 	if (kernel_uses_llsc && R10000_LLSC_WAR) {
@@ -345,18 +325,8 @@ static inline int test_and_set_bit_lock(unsigned long nr,
 		} while (unlikely(!res));
 
 		res = temp & (1UL << bit);
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		res = (mask & *a);
-		*a |= mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		res = __mips_test_and_set_bit_lock(nr, addr);
 
 	smp_llsc_mb();
 
@@ -373,7 +343,7 @@ static inline int test_and_set_bit_lock(unsigned long nr,
 static inline int test_and_clear_bit(unsigned long nr,
 	volatile unsigned long *addr)
 {
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 	unsigned long res;
 
 	smp_mb__before_llsc();
@@ -428,18 +398,8 @@ static inline int test_and_clear_bit(unsigned long nr,
 		} while (unlikely(!res));
 
 		res = temp & (1UL << bit);
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		res = (mask & *a);
-		*a &= ~mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		res = __mips_test_and_clear_bit(nr, addr);
 
 	smp_llsc_mb();
 
@@ -457,7 +417,7 @@ static inline int test_and_clear_bit(unsigned long nr,
 static inline int test_and_change_bit(unsigned long nr,
 	volatile unsigned long *addr)
 {
-	unsigned short bit = nr & SZLONG_MASK;
+	int bit = nr & SZLONG_MASK;
 	unsigned long res;
 
 	smp_mb__before_llsc();
@@ -494,18 +454,8 @@ static inline int test_and_change_bit(unsigned long nr,
 		} while (unlikely(!res));
 
 		res = temp & (1UL << bit);
-	} else {
-		volatile unsigned long *a = addr;
-		unsigned long mask;
-		unsigned long flags;
-
-		a += nr >> SZLONG_LOG;
-		mask = 1UL << bit;
-		raw_local_irq_save(flags);
-		res = (mask & *a);
-		*a ^= mask;
-		raw_local_irq_restore(flags);
-	}
+	} else
+		res = __mips_test_and_change_bit(nr, addr);
 
 	smp_llsc_mb();
 

arch/mips/include/asm/compat.h

@@ -290,7 +290,7 @@ struct compat_shmid64_ds {
 
 static inline int is_compat_task(void)
 {
-	return test_thread_flag(TIF_32BIT);
+	return test_thread_flag(TIF_32BIT_ADDR);
 }
 
 #endif /* _ASM_COMPAT_H */

arch/mips/include/asm/io.h

@@ -15,6 +15,7 @@
 #include <linux/compiler.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/irqflags.h>
 
 #include <asm/addrspace.h>
 #include <asm/bug.h>

arch/mips/include/asm/irqflags.h

@@ -16,6 +16,105 @@
 #include <linux/compiler.h>
 #include <asm/hazards.h>
 
+#if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC)
+
+__asm__(
+	"	.macro	arch_local_irq_disable\n"
+	"	.set	push						\n"
+	"	.set	noat						\n"
+	"	di							\n"
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+static inline void arch_local_irq_disable(void)
+{
+	__asm__ __volatile__(
+		"arch_local_irq_disable"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory");
+}
+
+
+__asm__(
+	"	.macro	arch_local_irq_save result			\n"
+	"	.set	push						\n"
+	"	.set	reorder						\n"
+	"	.set	noat						\n"
+	"	di	\\result					\n"
+	"	andi	\\result, 1					\n"
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+static inline unsigned long arch_local_irq_save(void)
+{
+	unsigned long flags;
+	asm volatile("arch_local_irq_save\t%0"
+		     : "=r" (flags)
+		     : /* no inputs */
+		     : "memory");
+	return flags;
+}
+
+
+__asm__(
+	"	.macro	arch_local_irq_restore flags			\n"
+	"	.set	push						\n"
+	"	.set	noreorder					\n"
+	"	.set	noat						\n"
+#if defined(CONFIG_IRQ_CPU)
+	/*
+	 * Slow, but doesn't suffer from a relatively unlikely race
+	 * condition we're having since days 1.
+	 */
+	"	beqz	\\flags, 1f					\n"
+	"	di							\n"
+	"	ei							\n"
+	"1:								\n"
+#else
+	/*
+	 * Fast, dangerous.  Life is fun, life is good.
+	 */
+	"	mfc0	$1, $12						\n"
+	"	ins	$1, \\flags, 0, 1				\n"
+	"	mtc0	$1, $12						\n"
+#endif
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+	unsigned long __tmp1;
+
+	__asm__ __volatile__(
+		"arch_local_irq_restore\t%0"
+		: "=r" (__tmp1)
+		: "0" (flags)
+		: "memory");
+}
+
+static inline void __arch_local_irq_restore(unsigned long flags)
+{
+	unsigned long __tmp1;
+
+	__asm__ __volatile__(
+		"arch_local_irq_restore\t%0"
+		: "=r" (__tmp1)
+		: "0" (flags)
+		: "memory");
+}
+#else
+/* Functions that require preempt_{dis,en}able() are in mips-atomic.c */
+void arch_local_irq_disable(void);
+unsigned long arch_local_irq_save(void);
+void arch_local_irq_restore(unsigned long flags);
+void __arch_local_irq_restore(unsigned long flags);
+#endif /* if defined(CONFIG_CPU_MIPSR2) && !defined(CONFIG_MIPS_MT_SMTC) */
+
+
 __asm__(
 	"	.macro	arch_local_irq_enable				\n"
 	"	.set	push						\n"
@@ -57,55 +156,6 @@ static inline void arch_local_irq_enable(void)
 }
 
 
-/*
- * For cli() we have to insert nops to make sure that the new value
- * has actually arrived in the status register before the end of this
- * macro.
- * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
- * no nops at all.
- */
-/*
- * For TX49, operating only IE bit is not enough.
- *
- * If mfc0 $12 follows store and the mfc0 is last instruction of a
- * page and fetching the next instruction causes TLB miss, the result
- * of the mfc0 might wrongly contain EXL bit.
- *
- * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
- *
- * Workaround: mask EXL bit of the result or place a nop before mfc0.
- */
-__asm__(
-	"	.macro	arch_local_irq_disable\n"
-	"	.set	push						\n"
-	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	$1, $2, 1					\n"
-	"	ori	$1, 0x400					\n"
-	"	.set	noreorder					\n"
-	"	mtc0	$1, $2, 1					\n"
-#elif defined(CONFIG_CPU_MIPSR2)
-	"	di							\n"
-#else
-	"	mfc0	$1,$12						\n"
-	"	ori	$1,0x1f						\n"
-	"	xori	$1,0x1f						\n"
-	"	.set	noreorder					\n"
-	"	mtc0	$1,$12						\n"
-#endif
-	"	irq_disable_hazard					\n"
-	"	.set	pop						\n"
-	"	.endm							\n");
-
-static inline void arch_local_irq_disable(void)
-{
-	__asm__ __volatile__(
-		"arch_local_irq_disable"
-		: /* no outputs */
-		: /* no inputs */
-		: "memory");
-}
-
 __asm__(
 	"	.macro	arch_local_save_flags flags			\n"
 	"	.set	push						\n"
@@ -125,113 +175,6 @@ static inline unsigned long arch_local_save_flags(void)
 	return flags;
 }
 
-__asm__(
-	"	.macro	arch_local_irq_save result			\n"
-	"	.set	push						\n"
-	"	.set	reorder						\n"
-	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"	mfc0	\\result, $2, 1					\n"
-	"	ori	$1, \\result, 0x400				\n"
-	"	.set	noreorder					\n"
-	"	mtc0	$1, $2, 1					\n"
-	"	andi	\\result, \\result, 0x400			\n"
-#elif defined(CONFIG_CPU_MIPSR2)
-	"	di	\\result					\n"
-	"	andi	\\result, 1					\n"
-#else
-	"	mfc0	\\result, $12					\n"
-	"	ori	$1, \\result, 0x1f				\n"
-	"	xori	$1, 0x1f					\n"
-	"	.set	noreorder					\n"
-	"	mtc0	$1, $12						\n"
-#endif
-	"	irq_disable_hazard					\n"
-	"	.set	pop						\n"
-	"	.endm							\n");
-
-static inline unsigned long arch_local_irq_save(void)
-{
-	unsigned long flags;
-	asm volatile("arch_local_irq_save\t%0"
-		     : "=r" (flags)
-		     : /* no inputs */
-		     : "memory");
-	return flags;
-}
-
-__asm__(
-	"	.macro	arch_local_irq_restore flags			\n"
-	"	.set	push						\n"
-	"	.set	noreorder					\n"
-	"	.set	noat						\n"
-#ifdef CONFIG_MIPS_MT_SMTC
-	"mfc0	$1, $2, 1						\n"
-	"andi	\\flags, 0x400						\n"
-	"ori	$1, 0x400						\n"
-	"xori	$1, 0x400						\n"
-	"or	\\flags, $1						\n"
-	"mtc0	\\flags, $2, 1						\n"
-#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
-	/*
-	 * Slow, but doesn't suffer from a relatively unlikely race
-	 * condition we're having since days 1.
-	 */
-	"	beqz	\\flags, 1f					\n"
-	"	 di							\n"
-	"	ei							\n"
-	"1:								\n"
-#elif defined(CONFIG_CPU_MIPSR2)
-	/*
-	 * Fast, dangerous.  Life is fun, life is good.
-	 */
-	"	mfc0	$1, $12						\n"
-	"	ins	$1, \\flags, 0, 1				\n"
-	"	mtc0	$1, $12						\n"
-#else
-	"	mfc0	$1, $12						\n"
-	"	andi	\\flags, 1					\n"
-	"	ori	$1, 0x1f					\n"
-	"	xori	$1, 0x1f					\n"
-	"	or	\\flags, $1					\n"
-	"	mtc0	\\flags, $12					\n"
-#endif
-	"	irq_disable_hazard					\n"
-	"	.set	pop						\n"
-	"	.endm							\n");
-
-
-static inline void arch_local_irq_restore(unsigned long flags)
-{
-	unsigned long __tmp1;
-
-#ifdef CONFIG_MIPS_MT_SMTC
-	/*
-	 * SMTC kernel needs to do a software replay of queued
-	 * IPIs, at the cost of branch and call overhead on each
-	 * local_irq_restore()
-	 */
-	if (unlikely(!(flags & 0x0400)))
-		smtc_ipi_replay();
-#endif
-
-	__asm__ __volatile__(
-		"arch_local_irq_restore\t%0"
-		: "=r" (__tmp1)
-		: "0" (flags)
-		: "memory");
-}
-
-static inline void __arch_local_irq_restore(unsigned long flags)
-{
-	unsigned long __tmp1;
-
-	__asm__ __volatile__(
-		"arch_local_irq_restore\t%0"
-		: "=r" (__tmp1)
-		: "0" (flags)
-		: "memory");
-}
 
 static inline int arch_irqs_disabled_flags(unsigned long flags)
 {
@@ -245,7 +188,7 @@ static inline int arch_irqs_disabled_flags(unsigned long flags)
 #endif
 }
 
-#endif
+#endif /* #ifndef __ASSEMBLY__ */
 
 /*
  * Do the CPU's IRQ-state tracing from assembly code.

arch/mips/include/asm/thread_info.h

@@ -112,12 +112,6 @@ register struct thread_info *__current_thread_info __asm__("$28");
 #define TIF_LOAD_WATCH		25	/* If set, load watch registers */
 #define TIF_SYSCALL_TRACE	31	/* syscall trace active */
 
-#ifdef CONFIG_MIPS32_O32
-#define TIF_32BIT TIF_32BIT_REGS
-#elif defined(CONFIG_MIPS32_N32)
-#define TIF_32BIT _TIF_32BIT_ADDR
-#endif /* CONFIG_MIPS32_O32 */
-
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
 #define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
 #define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)

arch/mips/lib/Makefile

@@ -2,8 +2,9 @@
 # Makefile for MIPS-specific library files..
 #
 
-lib-y	+= csum_partial.o delay.o memcpy.o memset.o \
-	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o
+lib-y	+= bitops.o csum_partial.o delay.o memcpy.o memset.o \
+	   mips-atomic.o strlen_user.o strncpy_user.o \
+	   strnlen_user.o uncached.o
 
 obj-y			+= iomap.o
 obj-$(CONFIG_PCI)	+= iomap-pci.o

arch/mips/lib/bitops.c

@@ -0,0 +1,179 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 1994-1997, 99, 2000, 06, 07 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (c) 1999, 2000  Silicon Graphics, Inc.
+ */
+#include <linux/bitops.h>
+#include <linux/irqflags.h>
+#include <linux/export.h>
+
+
+/**
+ * __mips_set_bit - Atomically set a bit in memory.  This is called by
+ * set_bit() if it cannot find a faster solution.
+ * @nr: the bit to set
+ * @addr: the address to start counting from
+ */
+void __mips_set_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr;
+	unsigned bit = nr & SZLONG_MASK;
+	unsigned long mask;
+	unsigned long flags;
+
+	a += nr >> SZLONG_LOG;
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	*a |= mask;
+	raw_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__mips_set_bit);
+
+
+/**
+ * __mips_clear_bit - Clears a bit in memory.  This is called by clear_bit() if
+ * it cannot find a faster solution.
+ * @nr: Bit to clear
+ * @addr: Address to start counting from
+ */
+void __mips_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr;
+	unsigned bit = nr & SZLONG_MASK;
+	unsigned long mask;
+	unsigned long flags;
+
+	a += nr >> SZLONG_LOG;
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	*a &= ~mask;
+	raw_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__mips_clear_bit);
+
+
+/**
+ * __mips_change_bit - Toggle a bit in memory.  This is called by change_bit()
+ * if it cannot find a faster solution.
+ * @nr: Bit to change
+ * @addr: Address to start counting from
+ */
+void __mips_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr;
+	unsigned bit = nr & SZLONG_MASK;
+	unsigned long mask;
+	unsigned long flags;
+
+	a += nr >> SZLONG_LOG;
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	*a ^= mask;
+	raw_local_irq_restore(flags);
+}
+EXPORT_SYMBOL(__mips_change_bit);
+
+
+/**
+ * __mips_test_and_set_bit - Set a bit and return its old value.  This is
+ * called by test_and_set_bit() if it cannot find a faster solution.
+ * @nr: Bit to set
+ * @addr: Address to count from
+ */
+int __mips_test_and_set_bit(unsigned long nr,
+			    volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr;
+	unsigned bit = nr & SZLONG_MASK;
+	unsigned long mask;
+	unsigned long flags;
+	unsigned long res;
+
+	a += nr >> SZLONG_LOG;
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	res = (mask & *a);
+	*a |= mask;
+	raw_local_irq_restore(flags);
+	return res;
+}
+EXPORT_SYMBOL(__mips_test_and_set_bit);
+
+
+/**
+ * __mips_test_and_set_bit_lock - Set a bit and return its old value.  This is
+ * called by test_and_set_bit_lock() if it cannot find a faster solution.
+ * @nr: Bit to set
+ * @addr: Address to count from
+ */
+int __mips_test_and_set_bit_lock(unsigned long nr,
+				 volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr;
+	unsigned bit = nr & SZLONG_MASK;
+	unsigned long mask;
+	unsigned long flags;
+	unsigned long res;
+
+	a += nr >> SZLONG_LOG;
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	res = (mask & *a);
+	*a |= mask;
+	raw_local_irq_restore(flags);
+	return res;
+}
+EXPORT_SYMBOL(__mips_test_and_set_bit_lock);
+
+
+/**
+ * __mips_test_and_clear_bit - Clear a bit and return its old value.  This is
+ * called by test_and_clear_bit() if it cannot find a faster solution.
+ * @nr: Bit to clear
+ * @addr: Address to count from
+ */
+int __mips_test_and_clear_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr;
+	unsigned bit = nr & SZLONG_MASK;
+	unsigned long mask;
+	unsigned long flags;
+	unsigned long res;
+
+	a += nr >> SZLONG_LOG;
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	res = (mask & *a);
+	*a &= ~mask;
+	raw_local_irq_restore(flags);
+	return res;
+}
+EXPORT_SYMBOL(__mips_test_and_clear_bit);
+
+
+/**
+ * __mips_test_and_change_bit - Change a bit and return its old value.  This is
+ * called by test_and_change_bit() if it cannot find a faster solution.
+ * @nr: Bit to change
+ * @addr: Address to count from
+ */
+int __mips_test_and_change_bit(unsigned long nr, volatile unsigned long *addr)
+{
+	volatile unsigned long *a = addr;
+	unsigned bit = nr & SZLONG_MASK;
+	unsigned long mask;
+	unsigned long flags;
+	unsigned long res;
+
+	a += nr >> SZLONG_LOG;
+	mask = 1UL << bit;
+	raw_local_irq_save(flags);
+	res = (mask & *a);
+	*a ^= mask;
+	raw_local_irq_restore(flags);
+	return res;
+}
+EXPORT_SYMBOL(__mips_test_and_change_bit);

arch/mips/lib/mips-atomic.c

@@ -0,0 +1,176 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2003 by Ralf Baechle
+ * Copyright (C) 1996 by Paul M. Antoine
+ * Copyright (C) 1999 Silicon Graphics
+ * Copyright (C) 2000 MIPS Technologies, Inc.
+ */
+#include <asm/irqflags.h>
+#include <asm/hazards.h>
+#include <linux/compiler.h>
+#include <linux/preempt.h>
+#include <linux/export.h>
+
+#if !defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT_SMTC)
+
+/*
+ * For cli() we have to insert nops to make sure that the new value
+ * has actually arrived in the status register before the end of this
+ * macro.
+ * R4000/R4400 need three nops, the R4600 two nops and the R10000 needs
+ * no nops at all.
+ */
+/*
+ * For TX49, operating only IE bit is not enough.
+ *
+ * If mfc0 $12 follows store and the mfc0 is last instruction of a
+ * page and fetching the next instruction causes TLB miss, the result
+ * of the mfc0 might wrongly contain EXL bit.
+ *
+ * ERT-TX49H2-027, ERT-TX49H3-012, ERT-TX49HL3-006, ERT-TX49H4-008
+ *
+ * Workaround: mask EXL bit of the result or place a nop before mfc0.
+ */
+__asm__(
+	"	.macro	arch_local_irq_disable\n"
+	"	.set	push						\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	$1, $2, 1					\n"
+	"	ori	$1, 0x400					\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1, $2, 1					\n"
+#elif defined(CONFIG_CPU_MIPSR2)
+	/* see irqflags.h for inline function */
+#else
+	"	mfc0	$1,$12						\n"
+	"	ori	$1,0x1f						\n"
+	"	xori	$1,0x1f						\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1,$12						\n"
+#endif
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+void arch_local_irq_disable(void)
+{
+	preempt_disable();
+	__asm__ __volatile__(
+		"arch_local_irq_disable"
+		: /* no outputs */
+		: /* no inputs */
+		: "memory");
+	preempt_enable();
+}
+EXPORT_SYMBOL(arch_local_irq_disable);
+
+
+__asm__(
+	"	.macro	arch_local_irq_save result			\n"
+	"	.set	push						\n"
+	"	.set	reorder						\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"	mfc0	\\result, $2, 1					\n"
+	"	ori	$1, \\result, 0x400				\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1, $2, 1					\n"
+	"	andi	\\result, \\result, 0x400			\n"
+#elif defined(CONFIG_CPU_MIPSR2)
+	/* see irqflags.h for inline function */
+#else
+	"	mfc0	\\result, $12					\n"
+	"	ori	$1, \\result, 0x1f				\n"
+	"	xori	$1, 0x1f					\n"
+	"	.set	noreorder					\n"
+	"	mtc0	$1, $12						\n"
+#endif
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+unsigned long arch_local_irq_save(void)
+{
+	unsigned long flags;
+	preempt_disable();
+	asm volatile("arch_local_irq_save\t%0"
+		     : "=r" (flags)
+		     : /* no inputs */
+		     : "memory");
+	preempt_enable();
+	return flags;
+}
+EXPORT_SYMBOL(arch_local_irq_save);
+
+
+__asm__(
+	"	.macro	arch_local_irq_restore flags			\n"
+	"	.set	push						\n"
+	"	.set	noreorder					\n"
+	"	.set	noat						\n"
+#ifdef CONFIG_MIPS_MT_SMTC
+	"mfc0	$1, $2, 1						\n"
+	"andi	\\flags, 0x400						\n"
+	"ori	$1, 0x400						\n"
+	"xori	$1, 0x400						\n"
+	"or	\\flags, $1						\n"
+	"mtc0	\\flags, $2, 1						\n"
+#elif defined(CONFIG_CPU_MIPSR2) && defined(CONFIG_IRQ_CPU)
+	/* see irqflags.h for inline function */
+#elif defined(CONFIG_CPU_MIPSR2)
+	/* see irqflags.h for inline function */
+#else
+	"	mfc0	$1, $12						\n"
+	"	andi	\\flags, 1					\n"
+	"	ori	$1, 0x1f					\n"
+	"	xori	$1, 0x1f					\n"
+	"	or	\\flags, $1					\n"
+	"	mtc0	\\flags, $12					\n"
+#endif
+	"	irq_disable_hazard					\n"
+	"	.set	pop						\n"
+	"	.endm							\n");
+
+void arch_local_irq_restore(unsigned long flags)
+{
+	unsigned long __tmp1;
+
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC kernel needs to do a software replay of queued
+	 * IPIs, at the cost of branch and call overhead on each
+	 * local_irq_restore()
+	 */
+	if (unlikely(!(flags & 0x0400)))
+		smtc_ipi_replay();
+#endif
+	preempt_disable();
+	__asm__ __volatile__(
+		"arch_local_irq_restore\t%0"
+		: "=r" (__tmp1)
+		: "0" (flags)
+		: "memory");
+	preempt_enable();
+}
+EXPORT_SYMBOL(arch_local_irq_restore);
+
+
+void __arch_local_irq_restore(unsigned long flags)
+{
+	unsigned long __tmp1;
+
+	preempt_disable();
+	__asm__ __volatile__(
+		"arch_local_irq_restore\t%0"
+		: "=r" (__tmp1)
+		: "0" (flags)
+		: "memory");
+	preempt_enable();
+}
+EXPORT_SYMBOL(__arch_local_irq_restore);
+
+#endif /* !defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT_SMTC) */

arch/mips/mti-malta/malta-platform.c

@@ -29,6 +29,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <asm/mips-boards/maltaint.h>
 #include <mtd/mtd-abi.h>
 
 #define SMC_PORT(base, int)						\
@@ -48,7 +49,7 @@ static struct plat_serial8250_port uart8250_data[] = {
 	SMC_PORT(0x2F8, 3),
 	{
 		.mapbase	= 0x1f000900,	/* The CBUS UART */
-		.irq		= MIPS_CPU_IRQ_BASE + 2,
+		.irq		= MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB2,
 		.uartclk	= 3686400,	/* Twice the usual clk! */
 		.iotype		= UPIO_MEM32,
 		.flags		= CBUS_UART_FLAGS,

arch/s390/Kconfig

@@ -96,6 +96,7 @@ config S390
 	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_CMPXCHG_LOCAL
 	select HAVE_CMPXCHG_DOUBLE
+	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
 	select HAVE_VIRT_CPU_ACCOUNTING
 	select VIRT_CPU_ACCOUNTING
 	select ARCH_DISCARD_MEMBLOCK

arch/s390/include/asm/cio.h

@@ -9,6 +9,8 @@
 
 #define LPM_ANYPATH 0xff
 #define __MAX_CSSID 0
+#define __MAX_SUBCHANNEL 65535
+#define __MAX_SSID 3
 
 #include <asm/scsw.h>
 

arch/s390/include/asm/compat.h

@@ -20,7 +20,7 @@
 #define PSW32_MASK_CC		0x00003000UL
 #define PSW32_MASK_PM		0x00000f00UL
 
-#define PSW32_MASK_USER		0x00003F00UL
+#define PSW32_MASK_USER		0x0000FF00UL
 
 #define PSW32_ADDR_AMODE	0x80000000UL
 #define PSW32_ADDR_INSN		0x7FFFFFFFUL

arch/s390/include/asm/pgtable.h

@@ -506,12 +506,15 @@ static inline int pud_bad(pud_t pud)
 
 static inline int pmd_present(pmd_t pmd)
 {
-	return (pmd_val(pmd) & _SEGMENT_ENTRY_ORIGIN) != 0UL;
+	unsigned long mask = _SEGMENT_ENTRY_INV | _SEGMENT_ENTRY_RO;
+	return (pmd_val(pmd) & mask) == _HPAGE_TYPE_NONE ||
+	       !(pmd_val(pmd) & _SEGMENT_ENTRY_INV);
 }
 
 static inline int pmd_none(pmd_t pmd)
 {
-	return (pmd_val(pmd) & _SEGMENT_ENTRY_INV) != 0UL;
+	return (pmd_val(pmd) & _SEGMENT_ENTRY_INV) &&
+	       !(pmd_val(pmd) & _SEGMENT_ENTRY_RO);
 }
 
 static inline int pmd_large(pmd_t pmd)
@@ -1223,6 +1226,11 @@ static inline void __pmd_idte(unsigned long address, pmd_t *pmdp)
 }
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
+
+#define SEGMENT_NONE	__pgprot(_HPAGE_TYPE_NONE)
+#define SEGMENT_RO	__pgprot(_HPAGE_TYPE_RO)
+#define SEGMENT_RW	__pgprot(_HPAGE_TYPE_RW)
+
 #define __HAVE_ARCH_PGTABLE_DEPOSIT
 extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pgtable_t pgtable);
 
@@ -1242,16 +1250,15 @@ static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 
 static inline unsigned long massage_pgprot_pmd(pgprot_t pgprot)
 {
-	unsigned long pgprot_pmd = 0;
-
-	if (pgprot_val(pgprot) & _PAGE_INVALID) {
-		if (pgprot_val(pgprot) & _PAGE_SWT)
-			pgprot_pmd |= _HPAGE_TYPE_NONE;
-		pgprot_pmd |= _SEGMENT_ENTRY_INV;
-	}
-	if (pgprot_val(pgprot) & _PAGE_RO)
-		pgprot_pmd |= _SEGMENT_ENTRY_RO;
-	return pgprot_pmd;
+	/*
+	 * pgprot is PAGE_NONE, PAGE_RO, or PAGE_RW (see __Pxxx / __Sxxx)
+	 * Convert to segment table entry format.
+	 */
+	if (pgprot_val(pgprot) == pgprot_val(PAGE_NONE))
+		return pgprot_val(SEGMENT_NONE);
+	if (pgprot_val(pgprot) == pgprot_val(PAGE_RO))
+		return pgprot_val(SEGMENT_RO);
+	return pgprot_val(SEGMENT_RW);
 }
 
 static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot)
@@ -1269,7 +1276,9 @@ static inline pmd_t pmd_mkhuge(pmd_t pmd)
 
 static inline pmd_t pmd_mkwrite(pmd_t pmd)
 {
-	pmd_val(pmd) &= ~_SEGMENT_ENTRY_RO;
+	/* Do not clobber _HPAGE_TYPE_NONE pages! */
+	if (!(pmd_val(pmd) & _SEGMENT_ENTRY_INV))
+		pmd_val(pmd) &= ~_SEGMENT_ENTRY_RO;
 	return pmd;
 }
 

arch/s390/include/asm/topology.h

@@ -8,6 +8,9 @@ struct cpu;
 
 #ifdef CONFIG_SCHED_BOOK
 
+extern unsigned char cpu_socket_id[NR_CPUS];
+#define topology_physical_package_id(cpu) (cpu_socket_id[cpu])
+
 extern unsigned char cpu_core_id[NR_CPUS];
 extern cpumask_t cpu_core_map[NR_CPUS];
 

arch/s390/include/uapi/asm/ptrace.h

@@ -239,7 +239,7 @@ typedef struct
 #define PSW_MASK_EA		0x00000000UL
 #define PSW_MASK_BA		0x00000000UL
 
-#define PSW_MASK_USER		0x00003F00UL
+#define PSW_MASK_USER		0x0000FF00UL
 
 #define PSW_ADDR_AMODE		0x80000000UL
 #define PSW_ADDR_INSN		0x7FFFFFFFUL
@@ -269,7 +269,7 @@ typedef struct
 #define PSW_MASK_EA		0x0000000100000000UL
 #define PSW_MASK_BA		0x0000000080000000UL
 
-#define PSW_MASK_USER		0x00003F8180000000UL
+#define PSW_MASK_USER		0x0000FF8180000000UL
 
 #define PSW_ADDR_AMODE		0x0000000000000000UL
 #define PSW_ADDR_INSN		0xFFFFFFFFFFFFFFFFUL

arch/s390/kernel/compat_signal.c

@@ -309,6 +309,10 @@ static int restore_sigregs32(struct pt_regs *regs,_sigregs32 __user *sregs)
 	regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
 		(__u64)(regs32.psw.mask & PSW32_MASK_USER) << 32 |
 		(__u64)(regs32.psw.addr & PSW32_ADDR_AMODE);
+	/* Check for invalid user address space control. */
+	if ((regs->psw.mask & PSW_MASK_ASC) >= (psw_kernel_bits & PSW_MASK_ASC))
+		regs->psw.mask = (psw_user_bits & PSW_MASK_ASC) |
+			(regs->psw.mask & ~PSW_MASK_ASC);
 	regs->psw.addr = (__u64)(regs32.psw.addr & PSW32_ADDR_INSN);
 	for (i = 0; i < NUM_GPRS; i++)
 		regs->gprs[i] = (__u64) regs32.gprs[i];
@@ -481,7 +485,10 @@ static int setup_frame32(int sig, struct k_sigaction *ka,
 
 	/* Set up registers for signal handler */
 	regs->gprs[15] = (__force __u64) frame;
-	regs->psw.mask |= PSW_MASK_BA;		/* force amode 31 */
+	/* Force 31 bit amode and default user address space control. */
+	regs->psw.mask = PSW_MASK_BA |
+		(psw_user_bits & PSW_MASK_ASC) |
+		(regs->psw.mask & ~PSW_MASK_ASC);
 	regs->psw.addr = (__force __u64) ka->sa.sa_handler;
 
 	regs->gprs[2] = map_signal(sig);
@@ -549,7 +556,10 @@ static int setup_rt_frame32(int sig, struct k_sigaction *ka, siginfo_t *info,
 
 	/* Set up registers for signal handler */
 	regs->gprs[15] = (__force __u64) frame;
-	regs->psw.mask |= PSW_MASK_BA;		/* force amode 31 */
+	/* Force 31 bit amode and default user address space control. */
+	regs->psw.mask = PSW_MASK_BA |
+		(psw_user_bits & PSW_MASK_ASC) |
+		(regs->psw.mask & ~PSW_MASK_ASC);
 	regs->psw.addr = (__u64) ka->sa.sa_handler;
 
 	regs->gprs[2] = map_signal(sig);

arch/s390/kernel/sclp.S

@@ -44,6 +44,12 @@ _sclp_wait_int:
 #endif
 	mvc	.LoldpswS1-.LbaseS1(16,%r13),0(%r8)
 	mvc	0(16,%r8),0(%r9)
+#ifdef CONFIG_64BIT
+	epsw	%r6,%r7				# set current addressing mode
+	nill	%r6,0x1				# in new psw (31 or 64 bit mode)
+	nilh	%r7,0x8000
+	stm	%r6,%r7,0(%r8)
+#endif
 	lhi	%r6,0x0200			# cr mask for ext int (cr0.54)
 	ltr	%r2,%r2
 	jz	.LsetctS1
@@ -87,7 +93,7 @@ _sclp_wait_int:
 	.long	0x00080000, 0x80000000+.LwaitS1	# PSW to handle ext int
 #ifdef CONFIG_64BIT
 .LextpswS1_64:
-	.quad	0x0000000180000000, .LwaitS1	# PSW to handle ext int, 64 bit
+	.quad	0, .LwaitS1			# PSW to handle ext int, 64 bit
 #endif
 .LwaitpswS1:
 	.long	0x010a0000, 0x00000000+.LloopS1	# PSW to wait for ext int

arch/s390/kernel/signal.c

@@ -136,6 +136,10 @@ static int restore_sigregs(struct pt_regs *regs, _sigregs __user *sregs)
 	/* Use regs->psw.mask instead of psw_user_bits to preserve PER bit. */
 	regs->psw.mask = (regs->psw.mask & ~PSW_MASK_USER) |
 		(user_sregs.regs.psw.mask & PSW_MASK_USER);
+	/* Check for invalid user address space control. */
+	if ((regs->psw.mask & PSW_MASK_ASC) >= (psw_kernel_bits & PSW_MASK_ASC))
+		regs->psw.mask = (psw_user_bits & PSW_MASK_ASC) |
+			(regs->psw.mask & ~PSW_MASK_ASC);
 	/* Check for invalid amode */
 	if (regs->psw.mask & PSW_MASK_EA)
 		regs->psw.mask |= PSW_MASK_BA;
@@ -273,7 +277,10 @@ static int setup_frame(int sig, struct k_sigaction *ka,
 
 	/* Set up registers for signal handler */
 	regs->gprs[15] = (unsigned long) frame;
-	regs->psw.mask |= PSW_MASK_EA | PSW_MASK_BA;	/* 64 bit amode */
+	/* Force default amode and default user address space control. */
+	regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
+		(psw_user_bits & PSW_MASK_ASC) |
+		(regs->psw.mask & ~PSW_MASK_ASC);
 	regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
 
 	regs->gprs[2] = map_signal(sig);
@@ -346,7 +353,10 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 
 	/* Set up registers for signal handler */
 	regs->gprs[15] = (unsigned long) frame;
-	regs->psw.mask |= PSW_MASK_EA | PSW_MASK_BA;	/* 64 bit amode */
+	/* Force default amode and default user address space control. */
+	regs->psw.mask = PSW_MASK_EA | PSW_MASK_BA |
+		(psw_user_bits & PSW_MASK_ASC) |
+		(regs->psw.mask & ~PSW_MASK_ASC);
 	regs->psw.addr = (unsigned long) ka->sa.sa_handler | PSW_ADDR_AMODE;
 
 	regs->gprs[2] = map_signal(sig);

arch/s390/kernel/topology.c

@@ -40,6 +40,7 @@ static DEFINE_SPINLOCK(topology_lock);
 static struct mask_info core_info;
 cpumask_t cpu_core_map[NR_CPUS];
 unsigned char cpu_core_id[NR_CPUS];
+unsigned char cpu_socket_id[NR_CPUS];
 
 static struct mask_info book_info;
 cpumask_t cpu_book_map[NR_CPUS];
@@ -83,11 +84,12 @@ static struct mask_info *add_cpus_to_mask(struct topology_cpu *tl_cpu,
 			cpumask_set_cpu(lcpu, &book->mask);
 			cpu_book_id[lcpu] = book->id;
 			cpumask_set_cpu(lcpu, &core->mask);
+			cpu_core_id[lcpu] = rcpu;
 			if (one_core_per_cpu) {
-				cpu_core_id[lcpu] = rcpu;
+				cpu_socket_id[lcpu] = rcpu;
 				core = core->next;
 			} else {
-				cpu_core_id[lcpu] = core->id;
+				cpu_socket_id[lcpu] = core->id;
 			}
 			smp_cpu_set_polarization(lcpu, tl_cpu->pp);
 		}

arch/s390/lib/uaccess_pt.c

@@ -39,7 +39,7 @@ static __always_inline unsigned long follow_table(struct mm_struct *mm,
 	pmd = pmd_offset(pud, addr);
 	if (pmd_none(*pmd))
 		return -0x10UL;
-	if (pmd_huge(*pmd)) {
+	if (pmd_large(*pmd)) {
 		if (write && (pmd_val(*pmd) & _SEGMENT_ENTRY_RO))
 			return -0x04UL;
 		return (pmd_val(*pmd) & HPAGE_MASK) + (addr & ~HPAGE_MASK);

arch/s390/mm/gup.c

@@ -126,7 +126,7 @@ static inline int gup_pmd_range(pud_t *pudp, pud_t pud, unsigned long addr,
 		 */
 		if (pmd_none(pmd) || pmd_trans_splitting(pmd))
 			return 0;
-		if (unlikely(pmd_huge(pmd))) {
+		if (unlikely(pmd_large(pmd))) {
 			if (!gup_huge_pmd(pmdp, pmd, addr, next,
 					  write, pages, nr))
 				return 0;
@@ -180,8 +180,7 @@ int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
 	addr = start;
 	len = (unsigned long) nr_pages << PAGE_SHIFT;
 	end = start + len;
-	if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ,
-					(void __user *)start, len)))
+	if ((end < start) || (end > TASK_SIZE))
 		return 0;
 
 	local_irq_save(flags);
@@ -229,7 +228,7 @@ int get_user_pages_fast(unsigned long start, int nr_pages, int write,
 	addr = start;
 	len = (unsigned long) nr_pages << PAGE_SHIFT;
 	end = start + len;
-	if (end < start)
+	if ((end < start) || (end > TASK_SIZE))
 		goto slow_irqon;
 
 	/*

arch/sparc/Kconfig

@@ -20,6 +20,7 @@ config SPARC
 	select HAVE_ARCH_TRACEHOOK
 	select SYSCTL_EXCEPTION_TRACE
 	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select RTC_CLASS
 	select RTC_DRV_M48T59
 	select HAVE_IRQ_WORK

arch/sparc/crypto/Makefile

@@ -13,13 +13,13 @@ obj-$(CONFIG_CRYPTO_DES_SPARC64) += camellia-sparc64.o
 
 obj-$(CONFIG_CRYPTO_CRC32C_SPARC64) += crc32c-sparc64.o
 
-sha1-sparc64-y := sha1_asm.o sha1_glue.o crop_devid.o
-sha256-sparc64-y := sha256_asm.o sha256_glue.o crop_devid.o
-sha512-sparc64-y := sha512_asm.o sha512_glue.o crop_devid.o
-md5-sparc64-y := md5_asm.o md5_glue.o crop_devid.o
+sha1-sparc64-y := sha1_asm.o sha1_glue.o
+sha256-sparc64-y := sha256_asm.o sha256_glue.o
+sha512-sparc64-y := sha512_asm.o sha512_glue.o
+md5-sparc64-y := md5_asm.o md5_glue.o
 
-aes-sparc64-y := aes_asm.o aes_glue.o crop_devid.o
-des-sparc64-y := des_asm.o des_glue.o crop_devid.o
-camellia-sparc64-y := camellia_asm.o camellia_glue.o crop_devid.o
+aes-sparc64-y := aes_asm.o aes_glue.o
+des-sparc64-y := des_asm.o des_glue.o
+camellia-sparc64-y := camellia_asm.o camellia_glue.o
 
-crc32c-sparc64-y := crc32c_asm.o crc32c_glue.o crop_devid.o
+crc32c-sparc64-y := crc32c_asm.o crc32c_glue.o

arch/sparc/crypto/aes_glue.c

@@ -475,3 +475,5 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("AES Secure Hash Algorithm, sparc64 aes opcode accelerated");
 
 MODULE_ALIAS("aes");
+
+#include "crop_devid.c"

arch/sparc/crypto/camellia_glue.c

@@ -320,3 +320,5 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Camellia Cipher Algorithm, sparc64 camellia opcode accelerated");
 
 MODULE_ALIAS("aes");
+
+#include "crop_devid.c"

arch/sparc/crypto/crc32c_glue.c

@@ -177,3 +177,5 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("CRC32c (Castagnoli), sparc64 crc32c opcode accelerated");
 
 MODULE_ALIAS("crc32c");
+
+#include "crop_devid.c"

arch/sparc/crypto/des_glue.c

@@ -527,3 +527,5 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms, sparc64 des opcode accelerated");
 
 MODULE_ALIAS("des");
+
+#include "crop_devid.c"

arch/sparc/crypto/md5_glue.c

@@ -186,3 +186,5 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("MD5 Secure Hash Algorithm, sparc64 md5 opcode accelerated");
 
 MODULE_ALIAS("md5");
+
+#include "crop_devid.c"

arch/sparc/crypto/sha1_glue.c

@@ -181,3 +181,5 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm, sparc64 sha1 opcode accelerated");
 
 MODULE_ALIAS("sha1");
+
+#include "crop_devid.c"

arch/sparc/crypto/sha256_glue.c

@@ -239,3 +239,5 @@ MODULE_DESCRIPTION("SHA-224 and SHA-256 Secure Hash Algorithm, sparc64 sha256 op
 
 MODULE_ALIAS("sha224");
 MODULE_ALIAS("sha256");
+
+#include "crop_devid.c"

arch/sparc/crypto/sha512_glue.c

@@ -224,3 +224,5 @@ MODULE_DESCRIPTION("SHA-384 and SHA-512 Secure Hash Algorithm, sparc64 sha512 op
 
 MODULE_ALIAS("sha384");
 MODULE_ALIAS("sha512");
+
+#include "crop_devid.c"

arch/sparc/include/asm/atomic_64.h

@@ -1,7 +1,7 @@
 /* atomic.h: Thankfully the V9 is at least reasonable for this
  *           stuff.
  *
- * Copyright (C) 1996, 1997, 2000 David S. Miller (davem@redhat.com)
+ * Copyright (C) 1996, 1997, 2000, 2012 David S. Miller (davem@redhat.com)
  */
 
 #ifndef __ARCH_SPARC64_ATOMIC__
@@ -106,6 +106,8 @@ static inline long atomic64_add_unless(atomic64_t *v, long a, long u)
 
 #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0)
 
+extern long atomic64_dec_if_positive(atomic64_t *v);
+
 /* Atomic operations are already serializing */
 #define smp_mb__before_atomic_dec()	barrier()
 #define smp_mb__after_atomic_dec()	barrier()

arch/sparc/include/asm/backoff.h

@@ -1,6 +1,46 @@
 #ifndef _SPARC64_BACKOFF_H
 #define _SPARC64_BACKOFF_H
 
+/* The macros in this file implement an exponential backoff facility
+ * for atomic operations.
+ *
+ * When multiple threads compete on an atomic operation, it is
+ * possible for one thread to be continually denied a successful
+ * completion of the compare-and-swap instruction.  Heavily
+ * threaded cpu implementations like Niagara can compound this
+ * problem even further.
+ *
+ * When an atomic operation fails and needs to be retried, we spin a
+ * certain number of times.  At each subsequent failure of the same
+ * operation we double the spin count, realizing an exponential
+ * backoff.
+ *
+ * When we spin, we try to use an operation that will cause the
+ * current cpu strand to block, and therefore make the core fully
+ * available to any other other runnable strands.  There are two
+ * options, based upon cpu capabilities.
+ *
+ * On all cpus prior to SPARC-T4 we do three dummy reads of the
+ * condition code register.  Each read blocks the strand for something
+ * between 40 and 50 cpu cycles.
+ *
+ * For SPARC-T4 and later we have a special "pause" instruction
+ * available.  This is implemented using writes to register %asr27.
+ * The cpu will block the number of cycles written into the register,
+ * unless a disrupting trap happens first.  SPARC-T4 specifically
+ * implements pause with a granularity of 8 cycles.  Each strand has
+ * an internal pause counter which decrements every 8 cycles.  So the
+ * chip shifts the %asr27 value down by 3 bits, and writes the result
+ * into the pause counter.  If a value smaller than 8 is written, the
+ * chip blocks for 1 cycle.
+ *
+ * To achieve the same amount of backoff as the three %ccr reads give
+ * on earlier chips, we shift the backoff value up by 7 bits.  (Three
+ * %ccr reads block for about 128 cycles, 1 << 7 == 128) We write the
+ * whole amount we want to block into the pause register, rather than
+ * loop writing 128 each time.
+ */
+
 #define BACKOFF_LIMIT	(4 * 1024)
 
 #ifdef CONFIG_SMP
@@ -11,16 +51,25 @@
 #define BACKOFF_LABEL(spin_label, continue_label) \
 	spin_label
 
-#define BACKOFF_SPIN(reg, tmp, label)	\
-	mov	reg, tmp; \
-88:	brnz,pt	tmp, 88b; \
-	 sub	tmp, 1, tmp; \
-	set	BACKOFF_LIMIT, tmp; \
-	cmp	reg, tmp; \
-	bg,pn	%xcc, label; \
-	 nop; \
-	ba,pt	%xcc, label; \
-	 sllx	reg, 1, reg;
+#define BACKOFF_SPIN(reg, tmp, label)		\
+	mov		reg, tmp;		\
+88:	rd		%ccr, %g0;		\
+	rd		%ccr, %g0;		\
+	rd		%ccr, %g0;		\
+	.section	.pause_3insn_patch,"ax";\
+	.word		88b;			\
+	sllx		tmp, 7, tmp;		\
+	wr		tmp, 0, %asr27;		\
+	clr		tmp;			\
+	.previous;				\
+	brnz,pt		tmp, 88b;		\
+	 sub		tmp, 1, tmp;		\
+	set		BACKOFF_LIMIT, tmp;	\
+	cmp		reg, tmp;		\
+	bg,pn		%xcc, label;		\
+	 nop;					\
+	ba,pt		%xcc, label;		\
+	 sllx		reg, 1, reg;
 
 #else
 

arch/sparc/include/asm/compat.h

@@ -232,9 +232,10 @@ static inline void __user *arch_compat_alloc_user_space(long len)
 	struct pt_regs *regs = current_thread_info()->kregs;
 	unsigned long usp = regs->u_regs[UREG_I6];
 
-	if (!(test_thread_flag(TIF_32BIT)))
+	if (test_thread_64bit_stack(usp))
 		usp += STACK_BIAS;
-	else
+
+	if (test_thread_flag(TIF_32BIT))
 		usp &= 0xffffffffUL;
 
 	usp -= len;

arch/sparc/include/asm/processor_64.h

@@ -196,7 +196,22 @@ extern unsigned long get_wchan(struct task_struct *task);
 #define KSTK_EIP(tsk)  (task_pt_regs(tsk)->tpc)
 #define KSTK_ESP(tsk)  (task_pt_regs(tsk)->u_regs[UREG_FP])
 
-#define cpu_relax()	barrier()
+/* Please see the commentary in asm/backoff.h for a description of
+ * what these instructions are doing and how they have been choosen.
+ * To make a long story short, we are trying to yield the current cpu
+ * strand during busy loops.
+ */
+#define cpu_relax()	asm volatile("\n99:\n\t"			\
+				     "rd	%%ccr, %%g0\n\t"	\
+				     "rd	%%ccr, %%g0\n\t"	\
+				     "rd	%%ccr, %%g0\n\t"	\
+				     ".section	.pause_3insn_patch,\"ax\"\n\t"\
+				     ".word	99b\n\t"		\
+				     "wr	%%g0, 128, %%asr27\n\t"	\
+				     "nop\n\t"				\
+				     "nop\n\t"				\
+				     ".previous"			\
+				     ::: "memory")
 
 /* Prefetch support.  This is tuned for UltraSPARC-III and later.
  * UltraSPARC-I will treat these as nops, and UltraSPARC-II has

arch/sparc/include/asm/prom.h

@@ -63,5 +63,10 @@ extern char *of_console_options;
 extern void irq_trans_init(struct device_node *dp);
 extern char *build_path_component(struct device_node *dp);
 
+/* SPARC has a local implementation */
+extern int of_address_to_resource(struct device_node *dev, int index,
+				  struct resource *r);
+#define of_address_to_resource of_address_to_resource
+
 #endif /* __KERNEL__ */
 #endif /* _SPARC_PROM_H */

arch/sparc/include/asm/thread_info_64.h

@@ -259,6 +259,11 @@ static inline bool test_and_clear_restore_sigmask(void)
 
 #define tsk_is_polling(t) test_tsk_thread_flag(t, TIF_POLLING_NRFLAG)
 
+#define thread32_stack_is_64bit(__SP) (((__SP) & 0x1) != 0)
+#define test_thread_64bit_stack(__SP) \
+	((test_thread_flag(TIF_32BIT) && !thread32_stack_is_64bit(__SP)) ? \
+	 false : true)
+
 #endif	/* !__ASSEMBLY__ */
 
 #endif /* __KERNEL__ */

arch/sparc/include/asm/ttable.h

@@ -372,7 +372,9 @@ etrap_spill_fixup_64bit:				\
 
 /* Normal 32bit spill */
 #define SPILL_2_GENERIC(ASI)				\
-	srl	%sp, 0, %sp;				\
+	and	%sp, 1, %g3;				\
+	brnz,pn	%g3, (. - (128 + 4));			\
+	 srl	%sp, 0, %sp;				\
 	stwa	%l0, [%sp + %g0] ASI;			\
 	mov	0x04, %g3;				\
 	stwa	%l1, [%sp + %g3] ASI;			\
@@ -398,14 +400,16 @@ etrap_spill_fixup_64bit:				\
 	stwa	%i6, [%g1 + %g0] ASI;			\
 	stwa	%i7, [%g1 + %g3] ASI;			\
 	saved;						\
-        retry; nop; nop;				\
+        retry;						\
 	b,a,pt	%xcc, spill_fixup_dax;			\
 	b,a,pt	%xcc, spill_fixup_mna;			\
 	b,a,pt	%xcc, spill_fixup;
 
 #define SPILL_2_GENERIC_ETRAP		\
 etrap_user_spill_32bit:			\
-	srl	%sp, 0, %sp;		\
+	and	%sp, 1, %g3;		\
+	brnz,pn	%g3, etrap_user_spill_64bit;	\
+	 srl	%sp, 0, %sp;		\
 	stwa	%l0, [%sp + 0x00] %asi;	\
 	stwa	%l1, [%sp + 0x04] %asi;	\
 	stwa	%l2, [%sp + 0x08] %asi;	\
@@ -427,7 +431,7 @@ etrap_user_spill_32bit:			\
 	ba,pt	%xcc, etrap_save;	\
 	 wrpr	%g1, %cwp;		\
 	nop; nop; nop; nop;		\
-	nop; nop; nop; nop;		\
+	nop; nop;			\
 	ba,a,pt	%xcc, etrap_spill_fixup_32bit; \
 	ba,a,pt	%xcc, etrap_spill_fixup_32bit; \
 	ba,a,pt	%xcc, etrap_spill_fixup_32bit;
@@ -592,7 +596,9 @@ user_rtt_fill_64bit:					\
 
 /* Normal 32bit fill */
 #define FILL_2_GENERIC(ASI)				\
-	srl	%sp, 0, %sp;				\
+	and	%sp, 1, %g3;				\
+	brnz,pn	%g3, (. - (128 + 4));			\
+	 srl	%sp, 0, %sp;				\
 	lduwa	[%sp + %g0] ASI, %l0;			\
 	mov	0x04, %g2;				\
 	mov	0x08, %g3;				\
@@ -616,14 +622,16 @@ user_rtt_fill_64bit:					\
 	lduwa	[%g1 + %g3] ASI, %i6;			\
 	lduwa	[%g1 + %g5] ASI, %i7;			\
 	restored;					\
-	retry; nop; nop; nop; nop;			\
+	retry; nop; nop;				\
 	b,a,pt	%xcc, fill_fixup_dax;			\
 	b,a,pt	%xcc, fill_fixup_mna;			\
 	b,a,pt	%xcc, fill_fixup;
 
 #define FILL_2_GENERIC_RTRAP				\
 user_rtt_fill_32bit:					\
-	srl	%sp, 0, %sp;				\
+	and	%sp, 1, %g3;				\
+	brnz,pn	%g3, user_rtt_fill_64bit;		\
+	 srl	%sp, 0, %sp;				\
 	lduwa	[%sp + 0x00] %asi, %l0;			\
 	lduwa	[%sp + 0x04] %asi, %l1;			\
 	lduwa	[%sp + 0x08] %asi, %l2;			\
@@ -643,7 +651,7 @@ user_rtt_fill_32bit:					\
 	ba,pt	%xcc, user_rtt_pre_restore;		\
 	 restored;					\
 	nop; nop; nop; nop; nop;			\
-	nop; nop; nop; nop; nop;			\
+	nop; nop; nop;					\
 	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
 	ba,a,pt	%xcc, user_rtt_fill_fixup;		\
 	ba,a,pt	%xcc, user_rtt_fill_fixup;

arch/sparc/include/uapi/asm/unistd.h

@@ -405,8 +405,13 @@
 #define __NR_setns		337
 #define __NR_process_vm_readv	338
 #define __NR_process_vm_writev	339
+#define __NR_kern_features	340
+#define __NR_kcmp		341
 
-#define NR_syscalls		340
+#define NR_syscalls		342
+
+/* Bitmask values returned from kern_features system call.  */
+#define KERN_FEATURE_MIXED_MODE_STACK	0x00000001
 
 #ifdef __32bit_syscall_numbers__
 /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,

arch/sparc/kernel/entry.h

@@ -59,6 +59,13 @@ struct popc_6insn_patch_entry {
 extern struct popc_6insn_patch_entry __popc_6insn_patch,
 	__popc_6insn_patch_end;
 
+struct pause_patch_entry {
+	unsigned int	addr;
+	unsigned int	insns[3];
+};
+extern struct pause_patch_entry __pause_3insn_patch,
+	__pause_3insn_patch_end;
+
 extern void __init per_cpu_patch(void);
 extern void sun4v_patch_1insn_range(struct sun4v_1insn_patch_entry *,
 				    struct sun4v_1insn_patch_entry *);