From 9a5ed0bac86edce4097abf7595a7de050b2f87fa Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 12 Jun 2019 09:42:22 +0200 Subject: [PATCH] regulator: wm831x: Convert to use GPIO descriptors This converts the Wolfson Micro WM831x DCDC converter to use a GPIO descriptor for the GPIO driving the DVS pin. There is just one (non-DT) machine in the kernel using this, and that is the Wolfson Micro (now Cirrus) Cragganmore 6410 so we patch this board to pass a descriptor table and fix up the driver accordingly. Cc: Charles Keepax Cc: Richard Fitzgerald Cc: patches@opensource.cirrus.com Signed-off-by: Linus Walleij Acked-by: Charles Keepax Signed-off-by: Mark Brown --- arch/arm/mach-s3c64xx/mach-crag6410.c | 21 ++++++++++++++++++- drivers/regulator/wm831x-dcdc.c | 29 ++++++++++++--------------- include/linux/mfd/wm831x/pdata.h | 1 - 3 files changed, 33 insertions(+), 18 deletions(-) diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index 379424d72ae7..8ec6a4f5eb05 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -398,7 +399,6 @@ static struct pca953x_platform_data crag6410_pca_data = { /* VDDARM is controlled by DVS1 connected to GPK(0) */ static struct wm831x_buckv_pdata vddarm_pdata = { .dvs_control_src = 1, - .dvs_gpio = S3C64XX_GPK(0), }; static struct regulator_consumer_supply vddarm_consumers[] = { @@ -596,6 +596,24 @@ static struct wm831x_pdata crag_pmic_pdata = { .touch = &touch_pdata, }; +/* + * VDDARM is eventually ending up as a regulator hanging on the MFD cell device + * "wm831x-buckv.1" spawn from drivers/mfd/wm831x-core.c. + * + * From the note on the platform data we can see that this is clearly DVS1 + * and assigned as dcdc1 resource to the MFD core which sets .id of the cell + * spawning the DVS1 platform device to 1, then the cell platform device + * name is calculated from 10*instance + id resulting in the device name + * "wm831x-buckv.11" + */ +static struct gpiod_lookup_table crag_pmic_gpiod_table = { + .dev_id = "wm831x-buckv.11", + .table = { + GPIO_LOOKUP("GPIOK", 0, "dvs", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct i2c_board_info i2c_devs0[] = { { I2C_BOARD_INFO("24c08", 0x50), }, { I2C_BOARD_INFO("tca6408", 0x20), @@ -836,6 +854,7 @@ static void __init crag6410_machine_init(void) s3c_fb_set_platdata(&crag6410_lcd_pdata); dwc2_hsotg_set_platdata(&crag6410_hsotg_pdata); + gpiod_add_lookup_table(&crag_pmic_gpiod_table); i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); diff --git a/drivers/regulator/wm831x-dcdc.c b/drivers/regulator/wm831x-dcdc.c index b422eef97b77..018dbbd96771 100644 --- a/drivers/regulator/wm831x-dcdc.c +++ b/drivers/regulator/wm831x-dcdc.c @@ -15,7 +15,7 @@ #include #include #include -#include +#include #include #include @@ -50,7 +50,7 @@ struct wm831x_dcdc { int base; struct wm831x *wm831x; struct regulator_dev *regulator; - int dvs_gpio; + struct gpio_desc *dvs_gpiod; int dvs_gpio_state; int on_vsel; int dvs_vsel; @@ -217,7 +217,7 @@ static int wm831x_buckv_set_dvs(struct regulator_dev *rdev, int state) return 0; dcdc->dvs_gpio_state = state; - gpio_set_value(dcdc->dvs_gpio, state); + gpiod_set_value(dcdc->dvs_gpiod, state); /* Should wait for DVS state change to be asserted if we have * a GPIO for it, for now assume the device is configured @@ -237,10 +237,10 @@ static int wm831x_buckv_set_voltage_sel(struct regulator_dev *rdev, int ret; /* If this value is already set then do a GPIO update if we can */ - if (dcdc->dvs_gpio && dcdc->on_vsel == vsel) + if (dcdc->dvs_gpiod && dcdc->on_vsel == vsel) return wm831x_buckv_set_dvs(rdev, 0); - if (dcdc->dvs_gpio && dcdc->dvs_vsel == vsel) + if (dcdc->dvs_gpiod && dcdc->dvs_vsel == vsel) return wm831x_buckv_set_dvs(rdev, 1); /* Always set the ON status to the minimum voltage */ @@ -249,7 +249,7 @@ static int wm831x_buckv_set_voltage_sel(struct regulator_dev *rdev, return ret; dcdc->on_vsel = vsel; - if (!dcdc->dvs_gpio) + if (!dcdc->dvs_gpiod) return ret; /* Kick the voltage transition now */ @@ -296,7 +296,7 @@ static int wm831x_buckv_get_voltage_sel(struct regulator_dev *rdev) { struct wm831x_dcdc *dcdc = rdev_get_drvdata(rdev); - if (dcdc->dvs_gpio && dcdc->dvs_gpio_state) + if (dcdc->dvs_gpiod && dcdc->dvs_gpio_state) return dcdc->dvs_vsel; else return dcdc->on_vsel; @@ -337,7 +337,7 @@ static void wm831x_buckv_dvs_init(struct platform_device *pdev, int ret; u16 ctrl; - if (!pdata || !pdata->dvs_gpio) + if (!pdata) return; /* gpiolib won't let us read the GPIO status so pick the higher @@ -345,17 +345,14 @@ static void wm831x_buckv_dvs_init(struct platform_device *pdev, */ dcdc->dvs_gpio_state = pdata->dvs_init_state; - ret = devm_gpio_request_one(&pdev->dev, pdata->dvs_gpio, - dcdc->dvs_gpio_state ? GPIOF_INIT_HIGH : 0, - "DCDC DVS"); - if (ret < 0) { - dev_err(wm831x->dev, "Failed to get %s DVS GPIO: %d\n", - dcdc->name, ret); + dcdc->dvs_gpiod = devm_gpiod_get(&pdev->dev, "dvs", + dcdc->dvs_gpio_state ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW); + if (IS_ERR(dcdc->dvs_gpiod)) { + dev_err(wm831x->dev, "Failed to get %s DVS GPIO: %ld\n", + dcdc->name, PTR_ERR(dcdc->dvs_gpiod)); return; } - dcdc->dvs_gpio = pdata->dvs_gpio; - switch (pdata->dvs_control_src) { case 1: ctrl = 2 << WM831X_DC1_DVS_SRC_SHIFT; diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h index dcc9631b3052..1b8bb36e13b8 100644 --- a/include/linux/mfd/wm831x/pdata.h +++ b/include/linux/mfd/wm831x/pdata.h @@ -52,7 +52,6 @@ struct wm831x_battery_pdata { * I2C or SPI buses. */ struct wm831x_buckv_pdata { - int dvs_gpio; /** CPU GPIO to use for DVS switching */ int dvs_control_src; /** Hardware DVS source to use (1 or 2) */ int dvs_init_state; /** DVS state to expect on startup */ int dvs_state_gpio; /** CPU GPIO to use for monitoring status */