redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

ARM: SoC fixes for 4.15-rc 

ARM SoC fixes for this merge window:
 
  - A revert of all SCPI changes from the 4.15 merge window. They had
    regressions on the Amlogic platforms, and the submaintainer isn't
    around to fix these bugs due to vacation, etc. So we agreed to revert
    and revisit in next release cycle.
 
  - A series fixing a number of bugs for ARM CCN interconnect, around
    module unload, smp_processor_id() in preemptable context, and fixing
    some memory allocation failure checks.
 
  - A handful of devicetree fixes for different platforms, fixing
    warnings and errors that were previously ignored by the compiler.
 
  - The usual set of mostly minor fixes for different platforms.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAloswBYPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3bFoP/R6fAth5zVuUveykTbHYSs1Oz5XsLw4X77mA
 vg9Y2bBiz82/R7/weISxn28iXd29FQk0inbohI3bGsqJ+OInKiBNJ4UDrvuvrG39
 F2ifH7bjg6x9aooXx0VRXdECckO6klVhe8kjRovRZv712bWUA5uRG/6YUxnyC5LX
 6smrhFUAhj5StUqaY8rFlF8Pob9ftee0aM8/C3LAggQBhwqU5RXY8HgL0jLb919q
 ewOuDgO3FtfrigtOlDWkrQLRe+sY2b5D97Z4amIe4rojqvD6i7grRFBfkfDb4gR2
 7Vc0FZmk7OaaOLsLChv8H8atCxpDJ6KPpg5NAfXk4KM2kbWLbinkLPMbXxSXB4bC
 Q26PPZhKP1OupsSl/9fewHbZeaMZSY0kQXHxBIXCtyMV110TsLVmdFTksbV0gVKk
 x0lBAttX2RZiRU0bFxOHACEXnRTS4/uDCxBvxh5othQZg5EqAEqcFoium2psMvsJ
 XzFPNetyqPE2KhOUMfwUbOtWs2js5E4HaxwyF9xduw32g10NxtRTKGUMeDrxdtW3
 dHQZMr33yLkSkk08S4LMdwUrlONieyJZYeVZ2Jxd+Lv4bn4ZX8mDbLU24BCtLwUI
 wR+8zS2YSVfer/t5JC+dIJzKAiufeOFovNurlsoFJsE2yNLfekZcZ/x63ZdVQnve
 8f0mibwa
 =DIHP
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:

 - A revert of all SCPI changes from the 4.15 merge window. They had
   regressions on the Amlogic platforms, and the submaintainer isn't
   around to fix these bugs due to vacation, etc. So we agreed to revert
   and revisit in next release cycle.

 - A series fixing a number of bugs for ARM CCN interconnect, around
   module unload, smp_processor_id() in preemptable context, and fixing
   some memory allocation failure checks.

 - A handful of devicetree fixes for different platforms, fixing
   warnings and errors that were previously ignored by the compiler.

 - The usual set of mostly minor fixes for different platforms.

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (42 commits)
  ARM64: dts: meson-gx: fix UART pclk clock name
  ARM: omap2: hide omap3_save_secure_ram on non-OMAP3 builds
  arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv
  ARM: dts: Fix dm814x missing phy-cells property
  ARM: dts: Fix elm interrupt compiler warning
  bus: arm-ccn: fix module unloading Error: Removing state 147 which has instances left.
  bus: arm-cci: Fix use of smp_processor_id() in preemptible context
  bus: arm-ccn: Fix use of smp_processor_id() in preemptible context
  bus: arm-ccn: Simplify code
  bus: arm-ccn: Check memory allocation failure
  bus: arm-ccn: constify attribute_group structures.
  firmware: arm_scpi: Revert updates made during v4.15 merge window
  arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv
  arm64: dts: sort vendor subdirectories in Makefile alphabetically
  meson-gx-socinfo: Fix package id parsing
  ARM: meson: fix spelling mistake: "Couln't" -> "Couldn't"
  ARM: dts: meson: fix the memory region of the GPIO interrupt controller
  ARM: dts: meson: correct the sort order for the the gpio_intc node
  MAINTAINERS: exclude other Socionext SoC DT files from ARM/UNIPHIER entry
  arm64: dts: uniphier: remove unnecessary interrupt-parent
  ...
hifive-unleashed-5.1
Linus Torvalds 2017-12-10 08:26:59 -08:00
parent c465fc11e5 8be0b9886b
commit 9c02e0601b
66 changed files with 276 additions and 208 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Documentation/devicetree/bindings/usb/am33xx-usb.txt
View File

@ -95,6 +95,7 @@ usb: usb@47400000 {
reg = <0x47401300 0x100>;
reg-names = "phy";
ti,ctrl_mod = <&ctrl_mod>;
#phy-cells = <0>;
};
usb0: usb@47401000 {
@ -141,6 +142,7 @@ usb: usb@47400000 {
reg = <0x47401b00 0x100>;
reg-names = "phy";
ti,ctrl_mod = <&ctrl_mod>;
#phy-cells = <0>;
};
usb1: usb@47401800 {

2
MAINTAINERS
View File

@ -2047,7 +2047,7 @@ F: arch/arm/boot/dts/uniphier*
F: arch/arm/include/asm/hardware/cache-uniphier.h
F: arch/arm/mach-uniphier/
F: arch/arm/mm/cache-uniphier.c
F: arch/arm64/boot/dts/socionext/
F: arch/arm64/boot/dts/socionext/uniphier*
F: drivers/bus/uniphier-system-bus.c
F: drivers/clk/uniphier/
F: drivers/gpio/gpio-uniphier.c

2
arch/arm/boot/dts/am33xx.dtsi
View File

@ -630,6 +630,7 @@
reg-names = "phy";
status = "disabled";
ti,ctrl_mod = <&usb_ctrl_mod>;
#phy-cells = <0>;
};
usb0: usb@47401000 {
@ -678,6 +679,7 @@
reg-names = "phy";
status = "disabled";
ti,ctrl_mod = <&usb_ctrl_mod>;
#phy-cells = <0>;
};
usb1: usb@47401800 {

6
arch/arm/boot/dts/am4372.dtsi
View File

@ -927,7 +927,8 @@
reg = <0x48038000 0x2000>,
<0x46000000 0x400000>;
reg-names = "mpu", "dat";
interrupts = <80>, <81>;
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
status = "disabled";
dmas = <&edma 8 2>,
@ -941,7 +942,8 @@
reg = <0x4803C000 0x2000>,
<0x46400000 0x400000>;
reg-names = "mpu", "dat";
interrupts = <82>, <83>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "tx", "rx";
status = "disabled";
dmas = <&edma 10 2>,

4
arch/arm/boot/dts/am437x-cm-t43.dts
View File

@ -301,8 +301,8 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
dmas = <&edma 16
&edma 17>;
dmas = <&edma 16 0
&edma 17 0>;
dma-names = "tx0", "rx0";
flash: w25q64cvzpig@0 {

1
arch/arm/boot/dts/armada-385-db-ap.dts
View File

@ -236,6 +236,7 @@
usb3_phy: usb3_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&reg_xhci0_vbus>;
#phy-cells = <0>;
};
reg_xhci0_vbus: xhci0-vbus {

1
arch/arm/boot/dts/armada-385-linksys.dtsi
View File

@ -66,6 +66,7 @@
usb3_1_phy: usb3_1-phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&usb3_1_vbus>;
#phy-cells = <0>;
};
usb3_1_vbus: usb3_1-vbus {

2
arch/arm/boot/dts/armada-385-synology-ds116.dts
View File

@ -191,11 +191,13 @@
usb3_0_phy: usb3_0_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&reg_usb3_0_vbus>;
#phy-cells = <0>;
};
usb3_1_phy: usb3_1_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&reg_usb3_1_vbus>;
#phy-cells = <0>;
};
reg_usb3_0_vbus: usb3-vbus0 {

2
arch/arm/boot/dts/armada-388-gp.dts
View File

@ -276,11 +276,13 @@
usb2_1_phy: usb2_1_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&reg_usb2_1_vbus>;
#phy-cells = <0>;
};
usb3_phy: usb3_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&reg_usb3_vbus>;
#phy-cells = <0>;
};
reg_usb3_vbus: usb3-vbus {

4
arch/arm/boot/dts/bcm-nsp.dtsi
View File

@ -85,7 +85,7 @@
timer@20200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x20200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
clocks = <&periph_clk>;
};
@ -93,7 +93,7 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0x20600 0x20>;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
IRQ_TYPE_LEVEL_HIGH)>;
IRQ_TYPE_EDGE_RISING)>;
clocks = <&periph_clk>;
};

1
arch/arm/boot/dts/bcm283x.dtsi
View File

@ -639,5 +639,6 @@
usbphy: phy {
compatible = "usb-nop-xceiv";
#phy-cells = <0>;
};
};

4
arch/arm/boot/dts/bcm958623hr.dts
View File

@ -141,10 +141,6 @@
status = "okay";
};
&sata {
status = "okay";
};
&qspi {
bspi-sel = <0>;
flash: m25p80@0 {

4
arch/arm/boot/dts/bcm958625hr.dts
View File

@ -177,10 +177,6 @@
status = "okay";
};
&sata {
status = "okay";
};
&srab {
compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
status = "okay";

2
arch/arm/boot/dts/dm814x.dtsi
View File

@ -75,6 +75,7 @@
reg = <0x47401300 0x100>;
reg-names = "phy";
ti,ctrl_mod = <&usb_ctrl_mod>;
#phy-cells = <0>;
};
usb0: usb@47401000 {
@ -385,6 +386,7 @@
reg = <0x1b00 0x100>;
reg-names = "phy";
ti,ctrl_mod = <&usb_ctrl_mod>;
#phy-cells = <0>;
};
};

9
arch/arm/boot/dts/imx53.dtsi
View File

@ -433,15 +433,6 @@
clock-names = "ipg", "per";
};
srtc: srtc@53fa4000 {
compatible = "fsl,imx53-rtc", "fsl,imx25-rtc";
reg = <0x53fa4000 0x4000>;
interrupts = <24>;
interrupt-parent = <&tzic>;
clocks = <&clks IMX5_CLK_SRTC_GATE>;
clock-names = "ipg";
};
iomuxc: iomuxc@53fa8000 {
compatible = "fsl,imx53-iomuxc";
reg = <0x53fa8000 0x4000>;

3
arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
View File

@ -72,7 +72,8 @@
};
&gpmc {
ranges = <1 0 0x08000000 0x1000000>; /* CS1: 16MB for LAN9221 */
ranges = <0 0 0x30000000 0x1000000 /* CS0: 16MB for NAND */
1 0 0x2c000000 0x1000000>; /* CS1: 16MB for LAN9221 */
ethernet@gpmc {
pinctrl-names = "default";

17
arch/arm/boot/dts/logicpd-som-lv.dtsi
View File

@ -33,11 +33,12 @@
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* gpio_4 */
#phy-cells = <0>;
};
};
&gpmc {
ranges = <0 0 0x00000000 0x1000000>; /* CS0: 16MB for NAND */
ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
compatible = "ti,omap2-nand";
@ -121,7 +122,7 @@
&mmc3 {
interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
pinctrl-0 = <&mmc3_pins>;
pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
pinctrl-names = "default";
vmmc-supply = <&wl12xx_vmmc>;
non-removable;
@ -132,8 +133,8 @@
wlcore: wlcore@2 {
compatible = "ti,wl1273";
reg = <2>;
interrupt-parent = <&gpio5>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */
interrupt-parent = <&gpio1>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; /* gpio 2 */
ref-clock-frequency = <26000000>;
};
};
@ -157,8 +158,6 @@
OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat5.sdmmc3_dat1 */
OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat2 */
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE3) /* sdmmc2_dat6.sdmmc3_dat3 */
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT_PULLUP | MUX_MODE4) /* mcbsp4_clkx.gpio_152 */
OMAP3_CORE1_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */
OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs2.sdmmc_clk */
>;
@ -228,6 +227,12 @@
OMAP3_WKUP_IOPAD(0x2a0e, PIN_OUTPUT | MUX_MODE4) /* sys_boot2.gpio_4 */
>;
};
wl127x_gpio: pinmux_wl127x_gpio_pin {
pinctrl-single,pins = <
OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */
OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
>;
};
};
&omap3_pmx_core2 {

18
arch/arm/boot/dts/meson.dtsi
View File

@ -85,15 +85,6 @@
reg = <0x7c00 0x200>;
};
gpio_intc: interrupt-controller@9880 {
compatible = "amlogic,meson-gpio-intc";
reg = <0xc1109880 0x10>;
interrupt-controller;
#interrupt-cells = <2>;
amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
status = "disabled";
};
hwrng: rng@8100 {
compatible = "amlogic,meson-rng";
reg = <0x8100 0x8>;
@ -191,6 +182,15 @@
status = "disabled";
};
gpio_intc: interrupt-controller@9880 {
compatible = "amlogic,meson-gpio-intc";
reg = <0x9880 0x10>;
interrupt-controller;
#interrupt-cells = <2>;
amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
status = "disabled";
};
wdt: watchdog@9900 {
compatible = "amlogic,meson6-wdt";
reg = <0x9900 0x8>;

1
arch/arm/boot/dts/nspire.dtsi
View File

@ -56,6 +56,7 @@
usb_phy: usb_phy {
compatible = "usb-nop-xceiv";
#phy-cells = <0>;
};
vbus_reg: vbus_reg {

1
arch/arm/boot/dts/omap3-beagle-xm.dts
View File

@ -90,6 +90,7 @@
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
vcc-supply = <&hsusb2_power>;
#phy-cells = <0>;
};
tfp410: encoder0 {

1
arch/arm/boot/dts/omap3-beagle.dts
View File

@ -64,6 +64,7 @@
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
vcc-supply = <&hsusb2_power>;
#phy-cells = <0>;
};
sound {

2
arch/arm/boot/dts/omap3-cm-t3x.dtsi
View File

@ -43,12 +43,14 @@
hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&hsusb1_power>;
#phy-cells = <0>;
};
/* HS USB Host PHY on PORT 2 */
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&hsusb2_power>;
#phy-cells = <0>;
};
ads7846reg: ads7846-reg {

1
arch/arm/boot/dts/omap3-evm-common.dtsi
View File

@ -29,6 +29,7 @@
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
vcc-supply = <&hsusb2_power>;
#phy-cells = <0>;
};
leds {

1
arch/arm/boot/dts/omap3-gta04.dtsi
View File

@ -120,6 +120,7 @@
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
#phy-cells = <0>;
};
tv0: connector {

1
arch/arm/boot/dts/omap3-igep0020-common.dtsi
View File

@ -58,6 +58,7 @@
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
vcc-supply = <&hsusb1_power>;
#phy-cells = <0>;
};
tfp410: encoder {

1
arch/arm/boot/dts/omap3-igep0030-common.dtsi
View File

@ -37,6 +37,7 @@
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */
#phy-cells = <0>;
};
};

1
arch/arm/boot/dts/omap3-lilly-a83x.dtsi
View File

@ -51,6 +51,7 @@
hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv";
vcc-supply = <&reg_vcc3>;
#phy-cells = <0>;
};
};

1
arch/arm/boot/dts/omap3-overo-base.dtsi
View File

@ -51,6 +51,7 @@
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>; /* gpio_183 */
vcc-supply = <&hsusb2_power>;
#phy-cells = <0>;
};
/* Regulator to trigger the nPoweron signal of the Wifi module */

1
arch/arm/boot/dts/omap3-pandora-common.dtsi
View File

@ -205,6 +205,7 @@
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */
vcc-supply = <&vaux2>;
#phy-cells = <0>;
};
/* HS USB Host VBUS supply

1
arch/arm/boot/dts/omap3-tao3530.dtsi
View File

@ -46,6 +46,7 @@
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* gpio_162 */
vcc-supply = <&hsusb2_power>;
#phy-cells = <0>;
};
sound {

1
arch/arm/boot/dts/omap3.dtsi
View File

@ -715,6 +715,7 @@
compatible = "ti,ohci-omap3";
reg = <0x48064400 0x400>;
interrupts = <76>;
remote-wakeup-connected;
};
usbhsehci: ehci@48064800 {

1
arch/arm/boot/dts/omap4-droid4-xt894.dts
View File

@ -73,6 +73,7 @@
/* HS USB Host PHY on PORT 1 */
hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv";
#phy-cells = <0>;
};
/* LCD regulator from sw5 source */

1
arch/arm/boot/dts/omap4-duovero.dtsi
View File

@ -43,6 +43,7 @@
hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
#phy-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&hsusb1phy_pins>;

1
arch/arm/boot/dts/omap4-panda-common.dtsi
View File

@ -89,6 +89,7 @@
hsusb1_phy: hsusb1_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */
#phy-cells = <0>;
vcc-supply = <&hsusb1_power>;
clocks = <&auxclk3_ck>;
clock-names = "main_clk";

1
arch/arm/boot/dts/omap4-var-som-om44.dtsi
View File

@ -44,6 +44,7 @@
reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>; /* gpio 177 */
vcc-supply = <&vbat>;
#phy-cells = <0>;
clocks = <&auxclk3_ck>;
clock-names = "main_clk";

5
arch/arm/boot/dts/omap4.dtsi
View File

@ -398,7 +398,7 @@
elm: elm@48078000 {
compatible = "ti,am3352-elm";
reg = <0x48078000 0x2000>;
interrupts = <4>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "elm";
status = "disabled";
};
@ -1081,14 +1081,13 @@
usbhsohci: ohci@4a064800 {
compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
remote-wakeup-connected;
};
usbhsehci: ehci@4a064c00 {
compatible = "ti,ehci-omap";
reg = <0x4a064c00 0x400>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
};
};

2
arch/arm/boot/dts/omap5-board-common.dtsi
View File

@ -73,12 +73,14 @@
clocks = <&auxclk1_ck>;
clock-names = "main_clk";
clock-frequency = <19200000>;
#phy-cells = <0>;
};
/* HS USB Host PHY on PORT 3 */
hsusb3_phy: hsusb3_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */
#phy-cells = <0>;
};
tpd12s015: encoder {

2
arch/arm/boot/dts/omap5-cm-t54.dts
View File

@ -63,12 +63,14 @@
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; /* gpio3_76 HUB_RESET */
#phy-cells = <0>;
};
/* HS USB Host PHY on PORT 3 */
hsusb3_phy: hsusb3_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; /* gpio3_83 ETH_RESET */
#phy-cells = <0>;
};
leds {

1
arch/arm/boot/dts/omap5.dtsi
View File

@ -940,6 +940,7 @@
compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
remote-wakeup-connected;
};
usbhsehci: ehci@4a064c00 {

1
arch/arm/boot/dts/r8a7790.dtsi
View File

@ -1201,6 +1201,7 @@
clock-names = "extal", "usb_extal";
#clock-cells = <2>;
#power-domain-cells = <0>;
#reset-cells = <1>;
};
prr: chipid@ff000044 {

1
arch/arm/boot/dts/r8a7792.dtsi
View File

@ -829,6 +829,7 @@
clock-names = "extal";
#clock-cells = <2>;
#power-domain-cells = <0>;
#reset-cells = <1>;
};
};

1
arch/arm/boot/dts/r8a7793.dtsi
View File

@ -1088,6 +1088,7 @@
clock-names = "extal", "usb_extal";
#clock-cells = <2>;
#power-domain-cells = <0>;
#reset-cells = <1>;
};
rst: reset-controller@e6160000 {

1
arch/arm/boot/dts/r8a7794.dtsi
View File

@ -1099,6 +1099,7 @@
clock-names = "extal", "usb_extal";
#clock-cells = <2>;
#power-domain-cells = <0>;
#reset-cells = <1>;
};
rst: reset-controller@e6160000 {

2
arch/arm/boot/dts/vf610-zii-dev-rev-c.dts
View File

@ -359,7 +359,7 @@
};
&i2c1 {
at24mac602@0 {
at24mac602@50 {
compatible = "atmel,24c02";
reg = <0x50>;
read-only;

2
arch/arm/mach-meson/platsmp.c
View File

@ -102,7 +102,7 @@ static void __init meson_smp_prepare_cpus(const char *scu_compatible,
scu_base = of_iomap(node, 0);
if (!scu_base) {
pr_err("Couln't map SCU registers\n");
pr_err("Couldn't map SCU registers\n");
return;
}

6
arch/arm/mach-omap2/cm_common.c
View File

@ -68,14 +68,17 @@ void __init omap2_set_globals_cm(void __iomem *cm, void __iomem *cm2)
int cm_split_idlest_reg(struct clk_omap_reg *idlest_reg, s16 *prcm_inst,
u8 *idlest_reg_id)
{
int ret;
if (!cm_ll_data->split_idlest_reg) {
WARN_ONCE(1, "cm: %s: no low-level function defined\n",
__func__);
return -EINVAL;
}
return cm_ll_data->split_idlest_reg(idlest_reg, prcm_inst,
ret = cm_ll_data->split_idlest_reg(idlest_reg, prcm_inst,
idlest_reg_id);
*prcm_inst -= cm_base.offset;
return ret;
}
/**
@ -337,6 +340,7 @@ int __init omap2_cm_base_init(void)
if (mem) {
mem->pa = res.start + data->offset;
mem->va = data->mem + data->offset;
mem->offset = data->offset;
}
data->np = np;

21
arch/arm/mach-omap2/omap-secure.c
View File

@ -73,6 +73,27 @@ phys_addr_t omap_secure_ram_mempool_base(void)
return omap_secure_memblock_base;
}
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
u32 omap3_save_secure_ram(void __iomem *addr, int size)
{
u32 ret;
u32 param[5];
if (size != OMAP3_SAVE_SECURE_RAM_SZ)
return OMAP3_SAVE_SECURE_RAM_SZ;
param[0] = 4; /* Number of arguments */
param[1] = __pa(addr); /* Physical address for saving */
param[2] = 0;
param[3] = 1;
param[4] = 1;
ret = save_secure_ram_context(__pa(param));
return ret;
}
#endif
/**
* rx51_secure_dispatcher: Routine to dispatch secure PPA API calls
* @idx: The PPA API index

4
arch/arm/mach-omap2/omap-secure.h
View File

@ -31,6 +31,8 @@
/* Maximum Secure memory storage size */
#define OMAP_SECURE_RAM_STORAGE (88 * SZ_1K)
#define OMAP3_SAVE_SECURE_RAM_SZ 0x803F
/* Secure low power HAL API index */
#define OMAP4_HAL_SAVESECURERAM_INDEX 0x1a
#define OMAP4_HAL_SAVEHW_INDEX 0x1b
@ -65,6 +67,8 @@ extern u32 omap_smc2(u32 id, u32 falg, u32 pargs);
extern u32 omap_smc3(u32 id, u32 process, u32 flag, u32 pargs);
extern phys_addr_t omap_secure_ram_mempool_base(void);
extern int omap_secure_ram_reserve_memblock(void);
extern u32 save_secure_ram_context(u32 args_pa);
extern u32 omap3_save_secure_ram(void __iomem *save_regs, int size);
extern u32 rx51_secure_dispatcher(u32 idx, u32 process, u32 flag, u32 nargs,
u32 arg1, u32 arg2, u32 arg3, u32 arg4);

10
arch/arm/mach-omap2/omap_device.c
View File

@ -391,10 +391,8 @@ omap_device_copy_resources(struct omap_hwmod *oh,
const char *name;
int error, irq = 0;
if (!oh || !oh->od || !oh->od->pdev) {
error = -EINVAL;
goto error;
}
if (!oh || !oh->od || !oh->od->pdev)
return -EINVAL;
np = oh->od->pdev->dev.of_node;
if (!np) {
@ -516,8 +514,10 @@ struct platform_device __init *omap_device_build(const char *pdev_name,
goto odbs_exit1;
od = omap_device_alloc(pdev, &oh, 1);
if (IS_ERR(od))
if (IS_ERR(od)) {
ret = PTR_ERR(od);
goto odbs_exit1;
}
ret = platform_device_add_data(pdev, pdata, pdata_len);
if (ret)

1
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
View File

@ -1646,6 +1646,7 @@ static struct omap_hwmod omap3xxx_mmc3_hwmod = {
.main_clk = "mmchs3_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP3430_EN_MMC3_SHIFT,
.idlest_reg_id = 1,

4
arch/arm/mach-omap2/pm.h
View File

@ -81,10 +81,6 @@ extern unsigned int omap3_do_wfi_sz;
/* ... and its pointer from SRAM after copy */
extern void (*omap3_do_wfi_sram)(void);
/* save_secure_ram_context function pointer and size, for copy to SRAM */
extern int save_secure_ram_context(u32 *addr);
extern unsigned int save_secure_ram_context_sz;
extern void omap3_save_scratchpad_contents(void);
#define PM_RTA_ERRATUM_i608 (1 << 0)

13
arch/arm/mach-omap2/pm34xx.c
View File

@ -48,6 +48,7 @@
#include "prm3xxx.h"
#include "pm.h"
#include "sdrc.h"
#include "omap-secure.h"
#include "sram.h"
#include "control.h"
#include "vc.h"
@ -66,7 +67,6 @@ struct power_state {
static LIST_HEAD(pwrst_list);
static int (*_omap_save_secure_sram)(u32 *addr);
void (*omap3_do_wfi_sram)(void);
static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
@ -121,8 +121,8 @@ static void omap3_save_secure_ram_context(void)
* will hang the system.
*/
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
ret = _omap_save_secure_sram((u32 *)(unsigned long)
__pa(omap3_secure_ram_storage));
ret = omap3_save_secure_ram(omap3_secure_ram_storage,
OMAP3_SAVE_SECURE_RAM_SZ);
pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
/* Following is for error tracking, it should not happen */
if (ret) {
@ -434,15 +434,10 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
*
* The minimum set of functions is pushed to SRAM for execution:
* - omap3_do_wfi for erratum i581 WA,
* - save_secure_ram_context for security extensions.
*/
void omap_push_sram_idle(void)
{
omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi, omap3_do_wfi_sz);
if (omap_type() != OMAP2_DEVICE_TYPE_GP)
_omap_save_secure_sram = omap_sram_push(save_secure_ram_context,
save_secure_ram_context_sz);
}
static void __init pm_errata_configure(void)
@ -553,7 +548,7 @@ int __init omap3_pm_init(void)
clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
omap3_secure_ram_storage =
kmalloc(0x803F, GFP_KERNEL);
kmalloc(OMAP3_SAVE_SECURE_RAM_SZ, GFP_KERNEL);
if (!omap3_secure_ram_storage)
pr_err("Memory allocation failed when allocating for secure sram context\n");

1
arch/arm/mach-omap2/prcm-common.h
View File

@ -528,6 +528,7 @@ struct omap_prcm_irq_setup {
struct omap_domain_base {
u32 pa;
void __iomem *va;
s16 offset;
};
/**

12
arch/arm/mach-omap2/prm33xx.c
View File

@ -176,17 +176,6 @@ static int am33xx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
return v;
}
static int am33xx_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
{
u32 v;
v = am33xx_prm_read_reg(pwrdm->prcm_offs, pwrdm->pwrstst_offs);
v &= AM33XX_LASTPOWERSTATEENTERED_MASK;
v >>= AM33XX_LASTPOWERSTATEENTERED_SHIFT;
return v;
}
static int am33xx_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
{
am33xx_prm_rmw_reg_bits(AM33XX_LOWPOWERSTATECHANGE_MASK,
@ -357,7 +346,6 @@ struct pwrdm_ops am33xx_pwrdm_operations = {
.pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst,
.pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst,
.pwrdm_read_pwrst = am33xx_pwrdm_read_pwrst,
.pwrdm_read_prev_pwrst = am33xx_pwrdm_read_prev_pwrst,
.pwrdm_set_logic_retst = am33xx_pwrdm_set_logic_retst,
.pwrdm_read_logic_pwrst = am33xx_pwrdm_read_logic_pwrst,
.pwrdm_read_logic_retst = am33xx_pwrdm_read_logic_retst,

26
arch/arm/mach-omap2/sleep34xx.S
View File

@ -93,20 +93,13 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
ENDPROC(enable_omap3630_toggle_l2_on_restore)
/*
* Function to call rom code to save secure ram context. This gets
* relocated to SRAM, so it can be all in .data section. Otherwise
* we need to initialize api_params separately.
* Function to call rom code to save secure ram context.
*
* r0 = physical address of the parameters
*/
.data
.align 3
ENTRY(save_secure_ram_context)
stmfd sp!, {r4 - r11, lr} @ save registers on stack
adr r3, api_params @ r3 points to parameters
str r0, [r3,#0x4] @ r0 has sdram address
ldr r12, high_mask
and r3, r3, r12
ldr r12, sram_phy_addr_mask
orr r3, r3, r12
mov r3, r0 @ physical address of parameters
mov r0, #25 @ set service ID for PPA
mov r12, r0 @ copy secure service ID in r12
mov r1, #0 @ set task id for ROM code in r1
@ -120,18 +113,7 @@ ENTRY(save_secure_ram_context)
nop
nop
ldmfd sp!, {r4 - r11, pc}
.align
sram_phy_addr_mask:
.word SRAM_BASE_P
high_mask:
.word 0xffff
api_params:
.word 0x4, 0x0, 0x0, 0x1, 0x1
ENDPROC(save_secure_ram_context)
ENTRY(save_secure_ram_context_sz)
.word . - save_secure_ram_context
.text
/*
* ======================

2
arch/arm64/boot/dts/Makefile
View File

@ -12,6 +12,7 @@ subdir-y += cavium
subdir-y += exynos
subdir-y += freescale
subdir-y += hisilicon
subdir-y += lg
subdir-y += marvell
subdir-y += mediatek
subdir-y += nvidia
@ -22,5 +23,4 @@ subdir-y += rockchip
subdir-y += socionext
subdir-y += sprd
subdir-y += xilinx
subdir-y += lg
subdir-y += zte

4
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
View File

@ -753,12 +753,12 @@
&uart_B {
clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
clock-names = "xtal", "core", "baud";
clock-names = "xtal", "pclk", "baud";
};
&uart_C {
clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
clock-names = "xtal", "core", "baud";
clock-names = "xtal", "pclk", "baud";
};
&vpu {

6
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
View File

@ -688,7 +688,7 @@
&uart_A {
clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
clock-names = "xtal", "core", "baud";
clock-names = "xtal", "pclk", "baud";
};
&uart_AO {
@ -703,12 +703,12 @@
&uart_B {
clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
clock-names = "xtal", "core", "baud";
clock-names = "xtal", "pclk", "baud";
};
&uart_C {
clocks = <&xtal>, <&clkc CLKID_UART2>, <&xtal>;
clock-names = "xtal", "core", "baud";
clock-names = "xtal", "pclk", "baud";
};
&vpu {

1
arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts
View File

@ -40,7 +40,6 @@
};
&ethsc {
interrupt-parent = <&gpio>;
interrupts = <0 8>;
};

1
arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts
View File

@ -40,7 +40,6 @@
};
&ethsc {
interrupt-parent = <&gpio>;
interrupts = <0 8>;
};

3
arch/arm64/boot/dts/socionext/uniphier-pxs3-ref.dts
View File

@ -38,8 +38,7 @@
};
&ethsc {
interrupt-parent = <&gpio>;
interrupts = <0 8>;
interrupts = <4 8>;
};
&serial0 {

7
drivers/bus/arm-cci.c
View File

@ -1755,14 +1755,17 @@ static int cci_pmu_probe(struct platform_device *pdev)
raw_spin_lock_init(&cci_pmu->hw_events.pmu_lock);
mutex_init(&cci_pmu->reserve_mutex);
atomic_set(&cci_pmu->active_events, 0);
cpumask_set_cpu(smp_processor_id(), &cci_pmu->cpus);
cpumask_set_cpu(get_cpu(), &cci_pmu->cpus);
ret = cci_pmu_init(cci_pmu, pdev);
if (ret)
if (ret) {
put_cpu();
return ret;
}
cpuhp_state_add_instance_nocalls(CPUHP_AP_PERF_ARM_CCI_ONLINE,
&cci_pmu->node);
put_cpu();
pr_info("ARM %s PMU driver probed", cci_pmu->model->name);
return 0;
}

25
drivers/bus/arm-ccn.c
View File

@ -262,7 +262,7 @@ static struct attribute *arm_ccn_pmu_format_attrs[] = {
NULL
};
static struct attribute_group arm_ccn_pmu_format_attr_group = {
static const struct attribute_group arm_ccn_pmu_format_attr_group = {
.name = "format",
.attrs = arm_ccn_pmu_format_attrs,
};
@ -451,7 +451,7 @@ static struct arm_ccn_pmu_event arm_ccn_pmu_events[] = {
static struct attribute
*arm_ccn_pmu_events_attrs[ARRAY_SIZE(arm_ccn_pmu_events) + 1];
static struct attribute_group arm_ccn_pmu_events_attr_group = {
static const struct attribute_group arm_ccn_pmu_events_attr_group = {
.name = "events",
.is_visible = arm_ccn_pmu_events_is_visible,
.attrs = arm_ccn_pmu_events_attrs,
@ -548,7 +548,7 @@ static struct attribute *arm_ccn_pmu_cmp_mask_attrs[] = {
NULL
};
static struct attribute_group arm_ccn_pmu_cmp_mask_attr_group = {
static const struct attribute_group arm_ccn_pmu_cmp_mask_attr_group = {
.name = "cmp_mask",
.attrs = arm_ccn_pmu_cmp_mask_attrs,
};
@ -569,7 +569,7 @@ static struct attribute *arm_ccn_pmu_cpumask_attrs[] = {
NULL,
};
static struct attribute_group arm_ccn_pmu_cpumask_attr_group = {
static const struct attribute_group arm_ccn_pmu_cpumask_attr_group = {
.attrs = arm_ccn_pmu_cpumask_attrs,
};
@ -1268,10 +1268,12 @@ static int arm_ccn_pmu_init(struct arm_ccn *ccn)
if (ccn->dt.id == 0) {
name = "ccn";
} else {
int len = snprintf(NULL, 0, "ccn_%d", ccn->dt.id);
name = devm_kzalloc(ccn->dev, len + 1, GFP_KERNEL);
snprintf(name, len + 1, "ccn_%d", ccn->dt.id);
name = devm_kasprintf(ccn->dev, GFP_KERNEL, "ccn_%d",
ccn->dt.id);
if (!name) {
err = -ENOMEM;
goto error_choose_name;
}
}
/* Perf driver registration */
@ -1298,7 +1300,7 @@ static int arm_ccn_pmu_init(struct arm_ccn *ccn)
}
/* Pick one CPU which we will use to collect data from CCN... */
cpumask_set_cpu(smp_processor_id(), &ccn->dt.cpu);
cpumask_set_cpu(get_cpu(), &ccn->dt.cpu);
/* Also make sure that the overflow interrupt is handled by this CPU */
if (ccn->irq) {
@ -1315,10 +1317,13 @@ static int arm_ccn_pmu_init(struct arm_ccn *ccn)
cpuhp_state_add_instance_nocalls(CPUHP_AP_PERF_ARM_CCN_ONLINE,
&ccn->dt.node);
put_cpu();
return 0;
error_pmu_register:
error_set_affinity:
put_cpu();
error_choose_name:
ida_simple_remove(&arm_ccn_pmu_ida, ccn->dt.id);
for (i = 0; i < ccn->num_xps; i++)
writel(0, ccn->xp[i].base + CCN_XP_DT_CONTROL);
@ -1581,8 +1586,8 @@ static int __init arm_ccn_init(void)
static void __exit arm_ccn_exit(void)
{
cpuhp_remove_multi_state(CPUHP_AP_PERF_ARM_CCN_ONLINE);
platform_driver_unregister(&arm_ccn_driver);
cpuhp_remove_multi_state(CPUHP_AP_PERF_ARM_CCN_ONLINE);
}
module_init(arm_ccn_init);

212
drivers/firmware/arm_scpi.c
View File

@ -28,7 +28,6 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/bitmap.h>
#include <linux/bitfield.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/export.h>
@ -73,13 +72,21 @@
#define MAX_DVFS_DOMAINS 8
#define MAX_DVFS_OPPS 16
#define DVFS_LATENCY(hdr) (le32_to_cpu(hdr) >> 16)
#define DVFS_OPP_COUNT(hdr) ((le32_to_cpu(hdr) >> 8) & 0xff)
#define PROTO_REV_MAJOR_MASK GENMASK(31, 16)
#define PROTO_REV_MINOR_MASK GENMASK(15, 0)
#define PROTOCOL_REV_MINOR_BITS 16
#define PROTOCOL_REV_MINOR_MASK ((1U << PROTOCOL_REV_MINOR_BITS) - 1)
#define PROTOCOL_REV_MAJOR(x) ((x) >> PROTOCOL_REV_MINOR_BITS)
#define PROTOCOL_REV_MINOR(x) ((x) & PROTOCOL_REV_MINOR_MASK)
#define FW_REV_MAJOR_MASK GENMASK(31, 24)
#define FW_REV_MINOR_MASK GENMASK(23, 16)
#define FW_REV_PATCH_MASK GENMASK(15, 0)
#define FW_REV_MAJOR_BITS 24
#define FW_REV_MINOR_BITS 16
#define FW_REV_PATCH_MASK ((1U << FW_REV_MINOR_BITS) - 1)
#define FW_REV_MINOR_MASK ((1U << FW_REV_MAJOR_BITS) - 1)
#define FW_REV_MAJOR(x) ((x) >> FW_REV_MAJOR_BITS)
#define FW_REV_MINOR(x) (((x) & FW_REV_MINOR_MASK) >> FW_REV_MINOR_BITS)
#define FW_REV_PATCH(x) ((x) & FW_REV_PATCH_MASK)
#define MAX_RX_TIMEOUT (msecs_to_jiffies(30))
@ -304,6 +311,10 @@ struct clk_get_info {
u8 name[20];
} __packed;
struct clk_get_value {
__le32 rate;
} __packed;
struct clk_set_value {
__le16 id;
__le16 reserved;
@ -317,9 +328,7 @@ struct legacy_clk_set_value {
} __packed;
struct dvfs_info {
u8 domain;
u8 opp_count;
__le16 latency;
__le32 header;
struct {
__le32 freq;
__le32 m_volt;
@ -342,6 +351,11 @@ struct _scpi_sensor_info {
char name[20];
};
struct sensor_value {
__le32 lo_val;
__le32 hi_val;
} __packed;
struct dev_pstate_set {
__le16 dev_id;
u8 pstate;
@ -405,20 +419,19 @@ static void scpi_process_cmd(struct scpi_chan *ch, u32 cmd)
unsigned int len;
if (scpi_info->is_legacy) {
struct legacy_scpi_shared_mem __iomem *mem =
ch->rx_payload;
struct legacy_scpi_shared_mem *mem = ch->rx_payload;
/* RX Length is not replied by the legacy Firmware */
len = match->rx_len;
match->status = ioread32(&mem->status);
match->status = le32_to_cpu(mem->status);
memcpy_fromio(match->rx_buf, mem->payload, len);
} else {
struct scpi_shared_mem __iomem *mem = ch->rx_payload;
struct scpi_shared_mem *mem = ch->rx_payload;
len = min(match->rx_len, CMD_SIZE(cmd));
match->status = ioread32(&mem->status);
match->status = le32_to_cpu(mem->status);
memcpy_fromio(match->rx_buf, mem->payload, len);
}
@ -432,11 +445,11 @@ static void scpi_process_cmd(struct scpi_chan *ch, u32 cmd)
static void scpi_handle_remote_msg(struct mbox_client *c, void *msg)
{
struct scpi_chan *ch = container_of(c, struct scpi_chan, cl);
struct scpi_shared_mem __iomem *mem = ch->rx_payload;
struct scpi_shared_mem *mem = ch->rx_payload;
u32 cmd = 0;
if (!scpi_info->is_legacy)
cmd = ioread32(&mem->command);
cmd = le32_to_cpu(mem->command);
scpi_process_cmd(ch, cmd);
}
@ -446,7 +459,7 @@ static void scpi_tx_prepare(struct mbox_client *c, void *msg)
unsigned long flags;
struct scpi_xfer *t = msg;
struct scpi_chan *ch = container_of(c, struct scpi_chan, cl);
struct scpi_shared_mem __iomem *mem = ch->tx_payload;
struct scpi_shared_mem *mem = (struct scpi_shared_mem *)ch->tx_payload;
if (t->tx_buf) {
if (scpi_info->is_legacy)
@ -465,7 +478,7 @@ static void scpi_tx_prepare(struct mbox_client *c, void *msg)
}
if (!scpi_info->is_legacy)
iowrite32(t->cmd, &mem->command);
mem->command = cpu_to_le32(t->cmd);
}
static struct scpi_xfer *get_scpi_xfer(struct scpi_chan *ch)
@ -570,13 +583,13 @@ scpi_clk_get_range(u16 clk_id, unsigned long *min, unsigned long *max)
static unsigned long scpi_clk_get_val(u16 clk_id)
{
int ret;
__le32 rate;
struct clk_get_value clk;
__le16 le_clk_id = cpu_to_le16(clk_id);
ret = scpi_send_message(CMD_GET_CLOCK_VALUE, &le_clk_id,
sizeof(le_clk_id), &rate, sizeof(rate));
sizeof(le_clk_id), &clk, sizeof(clk));
return ret ? ret : le32_to_cpu(rate);
return ret ? ret : le32_to_cpu(clk.rate);
}
static int scpi_clk_set_val(u16 clk_id, unsigned long rate)
@ -631,35 +644,35 @@ static int opp_cmp_func(const void *opp1, const void *opp2)
}
static struct scpi_dvfs_info *scpi_dvfs_get_info(u8 domain)
{
if (domain >= MAX_DVFS_DOMAINS)
return ERR_PTR(-EINVAL);
return scpi_info->dvfs[domain] ?: ERR_PTR(-EINVAL);
}
static int scpi_dvfs_populate_info(struct device *dev, u8 domain)
{
struct scpi_dvfs_info *info;
struct scpi_opp *opp;
struct dvfs_info buf;
int ret, i;
if (domain >= MAX_DVFS_DOMAINS)
return ERR_PTR(-EINVAL);
if (scpi_info->dvfs[domain]) /* data already populated */
return scpi_info->dvfs[domain];
ret = scpi_send_message(CMD_GET_DVFS_INFO, &domain, sizeof(domain),
&buf, sizeof(buf));
if (ret)
return ret;
return ERR_PTR(ret);
info = devm_kmalloc(dev, sizeof(*info), GFP_KERNEL);
info = kmalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
return ERR_PTR(-ENOMEM);
info->count = buf.opp_count;
info->latency = le16_to_cpu(buf.latency) * 1000; /* uS to nS */
info->count = DVFS_OPP_COUNT(buf.header);
info->latency = DVFS_LATENCY(buf.header) * 1000; /* uS to nS */
info->opps = devm_kcalloc(dev, info->count, sizeof(*opp), GFP_KERNEL);
if (!info->opps)
return -ENOMEM;
info->opps = kcalloc(info->count, sizeof(*opp), GFP_KERNEL);
if (!info->opps) {
kfree(info);
return ERR_PTR(-ENOMEM);
}
for (i = 0, opp = info->opps; i < info->count; i++, opp++) {
opp->freq = le32_to_cpu(buf.opps[i].freq);
@ -669,15 +682,7 @@ static int scpi_dvfs_populate_info(struct device *dev, u8 domain)
sort(info->opps, info->count, sizeof(*opp), opp_cmp_func, NULL);
scpi_info->dvfs[domain] = info;
return 0;
}
static void scpi_dvfs_populate(struct device *dev)
{
int domain;
for (domain = 0; domain < MAX_DVFS_DOMAINS; domain++)
scpi_dvfs_populate_info(dev, domain);
return info;
}
static int scpi_dev_domain_id(struct device *dev)
@ -708,6 +713,9 @@ static int scpi_dvfs_get_transition_latency(struct device *dev)
if (IS_ERR(info))
return PTR_ERR(info);
if (!info->latency)
return 0;
return info->latency;
}
@ -768,19 +776,20 @@ static int scpi_sensor_get_info(u16 sensor_id, struct scpi_sensor_info *info)
static int scpi_sensor_get_value(u16 sensor, u64 *val)
{
__le16 id = cpu_to_le16(sensor);
__le64 value;
struct sensor_value buf;
int ret;
ret = scpi_send_message(CMD_SENSOR_VALUE, &id, sizeof(id),
&value, sizeof(value));
&buf, sizeof(buf));
if (ret)
return ret;
if (scpi_info->is_legacy)
/* only 32-bits supported, upper 32 bits can be junk */
*val = le32_to_cpup((__le32 *)&value);
/* only 32-bits supported, hi_val can be junk */
*val = le32_to_cpu(buf.lo_val);
else
*val = le64_to_cpu(value);
*val = (u64)le32_to_cpu(buf.hi_val) << 32 |
le32_to_cpu(buf.lo_val);
return 0;
}
@ -853,19 +862,23 @@ static int scpi_init_versions(struct scpi_drvinfo *info)
static ssize_t protocol_version_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%lu.%lu\n",
FIELD_GET(PROTO_REV_MAJOR_MASK, scpi_info->protocol_version),
FIELD_GET(PROTO_REV_MINOR_MASK, scpi_info->protocol_version));
struct scpi_drvinfo *scpi_info = dev_get_drvdata(dev);
return sprintf(buf, "%d.%d\n",
PROTOCOL_REV_MAJOR(scpi_info->protocol_version),
PROTOCOL_REV_MINOR(scpi_info->protocol_version));
}
static DEVICE_ATTR_RO(protocol_version);
static ssize_t firmware_version_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%lu.%lu.%lu\n",
FIELD_GET(FW_REV_MAJOR_MASK, scpi_info->firmware_version),
FIELD_GET(FW_REV_MINOR_MASK, scpi_info->firmware_version),
FIELD_GET(FW_REV_PATCH_MASK, scpi_info->firmware_version));
struct scpi_drvinfo *scpi_info = dev_get_drvdata(dev);
return sprintf(buf, "%d.%d.%d\n",
FW_REV_MAJOR(scpi_info->firmware_version),
FW_REV_MINOR(scpi_info->firmware_version),
FW_REV_PATCH(scpi_info->firmware_version));
}
static DEVICE_ATTR_RO(firmware_version);
@ -876,13 +889,39 @@ static struct attribute *versions_attrs[] = {
};
ATTRIBUTE_GROUPS(versions);
static void scpi_free_channels(void *data)
static void
scpi_free_channels(struct device *dev, struct scpi_chan *pchan, int count)
{
struct scpi_drvinfo *info = data;
int i;
for (i = 0; i < info->num_chans; i++)
mbox_free_channel(info->channels[i].chan);
for (i = 0; i < count && pchan->chan; i++, pchan++) {
mbox_free_channel(pchan->chan);
devm_kfree(dev, pchan->xfers);
devm_iounmap(dev, pchan->rx_payload);
}
}
static int scpi_remove(struct platform_device *pdev)
{
int i;
struct device *dev = &pdev->dev;
struct scpi_drvinfo *info = platform_get_drvdata(pdev);
scpi_info = NULL; /* stop exporting SCPI ops through get_scpi_ops */
of_platform_depopulate(dev);
sysfs_remove_groups(&dev->kobj, versions_groups);
scpi_free_channels(dev, info->channels, info->num_chans);
platform_set_drvdata(pdev, NULL);
for (i = 0; i < MAX_DVFS_DOMAINS && info->dvfs[i]; i++) {
kfree(info->dvfs[i]->opps);
kfree(info->dvfs[i]);
}
devm_kfree(dev, info->channels);
devm_kfree(dev, info);
return 0;
}
#define MAX_SCPI_XFERS 10
@ -913,6 +952,7 @@ static int scpi_probe(struct platform_device *pdev)
{
int count, idx, ret;
struct resource res;
struct scpi_chan *scpi_chan;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
@ -929,19 +969,13 @@ static int scpi_probe(struct platform_device *pdev)
return -ENODEV;
}
scpi_info->channels = devm_kcalloc(dev, count, sizeof(struct scpi_chan),
GFP_KERNEL);
if (!scpi_info->channels)
scpi_chan = devm_kcalloc(dev, count, sizeof(*scpi_chan), GFP_KERNEL);
if (!scpi_chan)
return -ENOMEM;
ret = devm_add_action(dev, scpi_free_channels, scpi_info);
if (ret)
return ret;
for (; scpi_info->num_chans < count; scpi_info->num_chans++) {
for (idx = 0; idx < count; idx++) {
resource_size_t size;
int idx = scpi_info->num_chans;
struct scpi_chan *pchan = scpi_info->channels + idx;
struct scpi_chan *pchan = scpi_chan + idx;
struct mbox_client *cl = &pchan->cl;
struct device_node *shmem = of_parse_phandle(np, "shmem", idx);
@ -949,14 +983,15 @@ static int scpi_probe(struct platform_device *pdev)
of_node_put(shmem);
if (ret) {
dev_err(dev, "failed to get SCPI payload mem resource\n");
return ret;
goto err;
}
size = resource_size(&res);
pchan->rx_payload = devm_ioremap(dev, res.start, size);
if (!pchan->rx_payload) {
dev_err(dev, "failed to ioremap SCPI payload\n");
return -EADDRNOTAVAIL;
ret = -EADDRNOTAVAIL;
goto err;
}
pchan->tx_payload = pchan->rx_payload + (size >> 1);
@ -982,11 +1017,17 @@ static int scpi_probe(struct platform_device *pdev)
dev_err(dev, "failed to get channel%d err %d\n",
idx, ret);
}
err:
scpi_free_channels(dev, scpi_chan, idx);
scpi_info = NULL;
return ret;
}
scpi_info->channels = scpi_chan;
scpi_info->num_chans = count;
scpi_info->commands = scpi_std_commands;
scpi_info->scpi_ops = &scpi_ops;
platform_set_drvdata(pdev, scpi_info);
if (scpi_info->is_legacy) {
/* Replace with legacy variants */
@ -1002,23 +1043,23 @@ static int scpi_probe(struct platform_device *pdev)
ret = scpi_init_versions(scpi_info);
if (ret) {
dev_err(dev, "incorrect or no SCP firmware found\n");
scpi_remove(pdev);
return ret;
}
scpi_dvfs_populate(dev);
_dev_info(dev, "SCP Protocol %d.%d Firmware %d.%d.%d version\n",
PROTOCOL_REV_MAJOR(scpi_info->protocol_version),
PROTOCOL_REV_MINOR(scpi_info->protocol_version),
FW_REV_MAJOR(scpi_info->firmware_version),
FW_REV_MINOR(scpi_info->firmware_version),
FW_REV_PATCH(scpi_info->firmware_version));
scpi_info->scpi_ops = &scpi_ops;
_dev_info(dev, "SCP Protocol %lu.%lu Firmware %lu.%lu.%lu version\n",
FIELD_GET(PROTO_REV_MAJOR_MASK, scpi_info->protocol_version),
FIELD_GET(PROTO_REV_MINOR_MASK, scpi_info->protocol_version),
FIELD_GET(FW_REV_MAJOR_MASK, scpi_info->firmware_version),
FIELD_GET(FW_REV_MINOR_MASK, scpi_info->firmware_version),
FIELD_GET(FW_REV_PATCH_MASK, scpi_info->firmware_version));
ret = devm_device_add_groups(dev, versions_groups);
ret = sysfs_create_groups(&dev->kobj, versions_groups);
if (ret)
dev_err(dev, "unable to create sysfs version group\n");
return devm_of_platform_populate(dev);
return of_platform_populate(dev->of_node, NULL, NULL, dev);
}
static const struct of_device_id scpi_of_match[] = {
@ -1035,6 +1076,7 @@ static struct platform_driver scpi_driver = {
.of_match_table = scpi_of_match,
},
.probe = scpi_probe,
.remove = scpi_remove,
};
module_platform_driver(scpi_driver);

4
drivers/soc/amlogic/meson-gx-socinfo.c
View File

@ -20,8 +20,8 @@
#define AO_SEC_SOCINFO_OFFSET AO_SEC_SD_CFG8
#define SOCINFO_MAJOR GENMASK(31, 24)
#define SOCINFO_MINOR GENMASK(23, 16)
#define SOCINFO_PACK GENMASK(15, 8)
#define SOCINFO_PACK GENMASK(23, 16)
#define SOCINFO_MINOR GENMASK(15, 8)
#define SOCINFO_MISC GENMASK(7, 0)
static const struct meson_gx_soc_id {

1
drivers/tee/optee/core.c
View File

@ -590,7 +590,6 @@ static int __init optee_driver_init(void)
return -ENODEV;
np = of_find_matching_node(fw_np, optee_match);
of_node_put(fw_np);
if (!np)
return -ENODEV;