diff --git a/Documentation/isdn/INTERFACE b/Documentation/isdn/INTERFACE deleted file mode 100644 index 5df17e5b25c8..000000000000 --- a/Documentation/isdn/INTERFACE +++ /dev/null @@ -1,759 +0,0 @@ -$Id: INTERFACE,v 1.15.8.2 2001/03/13 16:17:07 kai Exp $ - -Description of the Interface between Linklevel and Hardwarelevel - of isdn4linux: - - - The Communication between Linklevel (LL) and Hardwarelevel (HL) - is based on the struct isdn_if (defined in isdnif.h). - - An HL-driver can register itself at LL by calling the function - register_isdn() with a pointer to that struct. Prior to that, it has - to preset some of the fields of isdn_if. The LL sets the rest of - the fields. All further communication is done via callbacks using - the function-pointers defined in isdn_if. - - Changes/Version numbering: - - During development of the ISDN subsystem, several changes have been - made to the interface. Before it went into kernel, the package - had a unique version number. The last version, distributed separately - was 0.7.4. When the subsystem went into kernel, every functional unit - got a separate version number. These numbers are shown at initialization, - separated by slashes: - - c.c/t.t/n.n/p.p/a.a/v.v - - where - - c.c is the revision of the common code. - t.t is the revision of the tty related code. - n.n is the revision of the network related code. - p.p is the revision of the ppp related code. - a.a is the revision of the audio related code. - v.v is the revision of the V.110 related code. - - Changes in this document are marked with '***CHANGEx' where x representing - the version number. If that number starts with 0, it refers to the old, - separately distributed package. If it starts with one of the letters - above, it refers to the revision of the corresponding module. - ***CHANGEIx refers to the revision number of the isdnif.h - -1. Description of the fields of isdn_if: - - int channels; - - This field has to be set by the HL-driver to the number of channels - supported prior to calling register_isdn(). Upon return of the call, - the LL puts an id there, which has to be used by the HL-driver when - invoking the other callbacks. - - int maxbufsize; - - ***CHANGE0.6: New since this version. - - Also to be preset by the HL-driver. With this value the HL-driver - tells the LL the maximum size of a data-packet it will accept. - - unsigned long features; - - To be preset by the HL-driver. Using this field, the HL-driver - announces the features supported. At the moment this is limited to - report the supported layer2 and layer3-protocols. For setting this - field the constants ISDN_FEATURE..., declared in isdnif.h have to be - used. - - ***CHANGE0.7.1: The line type (1TR6, EDSS1) has to be set. - - unsigned short hl_hdrlen; - - ***CHANGE0.7.4: New field. - - To be preset by the HL-driver, if it supports sk_buff's. The driver - should put here the amount of additional space needed in sk_buff's for - its internal purposes. Drivers not supporting sk_buff's should - initialize this field to 0. - - void (*rcvcallb_skb)(int, int, struct sk_buff *) - - ***CHANGE0.7.4: New field. - - This field will be set by LL. The HL-driver delivers received data- - packets by calling this function. Upon calling, the HL-driver must - already have its private data pulled off the head of the sk_buff. - - Parameter: - int driver-Id - int Channel-number locally to the driver. (starting with 0) - struct sk_buff * Pointer to sk_buff, containing received data. - - int (*statcallb)(isdn_ctrl*); - - This field will be set by LL. This function has to be called by the - HL-driver for signaling status-changes or other events to the LL. - - Parameter: - isdn_ctrl* - - The struct isdn_ctrl also defined in isdn_if. The exact meanings of its - fields are described together with the descriptions of the possible - events. Here is only a short description of the fields: - - driver = driver Id. - command = event-type. (one of the constants ISDN_STAT_...) - arg = depends on event-type. - num = depends on event-type. - - Returnvalue: - 0 on success, else -1 - - int (*command)(isdn_ctrl*); - - This field has to be preset by the HL-driver. It points to a function, - to be called by LL to perform functions like dialing, B-channel - setup, etc. The exact meaning of the parameters is described with the - descriptions of the possible commands. - - Parameter: - isdn_ctrl* - driver = driver-Id - command = command to perform. (one of the constants ISDN_CMD_...) - arg = depends on command. - num = depends on command. - - Returnvalue: - >=0 on success, else error-code (-ENODEV etc.) - - int (*writebuf_skb)(int, int, int, struct sk_buff *) - - ***CHANGE0.7.4: New field. - ***CHANGEI.1.21: New field. - - This field has to be preset by the HL-driver. The given function will - be called by the LL for delivering data to be send via B-Channel. - - - Parameter: - int driver-Id ***CHANGE0.7.4: New parameter. - int channel-number locally to the HL-driver. (starts with 0) - int ack ***ChangeI1.21: New parameter - If this is !0, the driver has to signal the delivery - by sending an ISDN_STAT_BSENT. If this is 0, the driver - MUST NOT send an ISDN_STAT_BSENT. - struct sk_buff * Pointer to sk_buff containing data to be send via - B-channel. - - Returnvalue: - Length of data accepted on success, else error-code (-EINVAL on - oversized packets etc.) - - int (*writecmd)(u_char*, int, int, int, int); - - This field has to be preset by the HL-driver. The given function will be - called to perform write-requests on /dev/isdnctrl (i.e. sending commands - to the card) The data-format is hardware-specific. This function is - intended for debugging only. It is not necessary for normal operation - and never will be called by the tty-emulation- or network-code. If - this function is not supported, the driver has to set NULL here. - - Parameter: - u_char* pointer to data. - int length of data. - int flag: 0 = call from within kernel-space. (HL-driver must use - memcpy, may NOT use schedule()) - 1 = call from user-space. (HL-driver must use - memcpy_fromfs, use of schedule() allowed) - int driver-Id. - int channel-number locally to the HL-driver. (starts with 0) - -***CHANGEI1.14: The driver-Id and channel-number are new since this revision. - - Returnvalue: - Length of data accepted on success, else error-code (-EINVAL etc.) - - int (*readstat)(u_char*, int, int, int, int); - - This field has to be preset by the HL-driver. The given function will be - called to perform read-requests on /dev/isdnctrl (i.e. reading replies - from the card) The data-format is hardware-specific. This function is - intended for debugging only. It is not necessary for normal operation - and never will be called by the tty-emulation- or network-code. If - this function is not supported, the driver has to set NULL here. - - Parameter: - u_char* pointer to data. - int length of data. - int flag: 0 = call from within kernel-space. (HL-driver must use - memcpy, may NOT use schedule()) - 1 = call from user-space. (HL-driver must use - memcpy_fromfs, use of schedule() allowed) - int driver-Id. - int channel-number locally to the HL-driver. (starts with 0) - -***CHANGEI1.14: The driver-Id and channel-number are new since this revision. - - Returnvalue: - Length of data on success, else error-code (-EINVAL etc.) - - char id[20]; - ***CHANGE0.7: New since this version. - - This string has to be preset by the HL-driver. Its purpose is for - identification of the driver by the user. Eg.: it is shown in the - status-info of /dev/isdninfo. Furthermore it is used as Id for binding - net-interfaces to a specific channel. If a string of length zero is - given, upon return, isdn4linux will replace it by a generic name. (line0, - line1 etc.) It is recommended to make this string configurable during - module-load-time. (copy a global variable to this string.) For doing that, - modules 1.2.8 or newer are necessary. - -2. Description of the commands, a HL-driver has to support: - - All commands will be performed by calling the function command() described - above from within the LL. The field command of the struct-parameter will - contain the desired command, the field driver is always set to the - appropriate driver-Id. - - Until now, the following commands are defined: - -***CHANGEI1.34: The parameter "num" has been replaced by a union "parm" containing - the old "num" and a new setup_type struct used for ISDN_CMD_DIAL - and ISDN_STAT_ICALL callback. - - ISDN_CMD_IOCTL: - - This command is intended for performing ioctl-calls for configuring - hardware or similar purposes (setting port-addresses, loading firmware - etc.) For this purpose, in the LL all ioctl-calls with an argument - >= IIOCDRVCTL (0x100) will be handed transparently to this - function after subtracting 0x100 and placing the result in arg. - Example: - If a userlevel-program calls ioctl(0x101,...) the function gets - called with the field command set to 1. - - Parameter: - driver = driver-Id. - command = ISDN_CMD_IOCTL - arg = Original ioctl-cmd - IIOCDRVCTL - parm.num = first bytes filled with (unsigned long)arg - - Returnvalue: - Depending on driver. - - - ISDN_CMD_DIAL: - - This command is used to tell the HL-driver it should dial a given - number. - - Parameter: - driver = driver-Id. - command = ISDN_CMD_DIAL - arg = channel-number locally to the driver. (starting with 0) - - parm.setup.phone = An ASCII-String containing the number to dial. - parm.setup.eazmsn = An ASCII-Sting containing the own EAZ or MSN. - parm.setup.si1 = The Service-Indicator. - parm.setup.si2 = Additional Service-Indicator. - - If the Line has been designed as SPV (a special german - feature, meaning semi-leased-line) the phone has to - start with an "S". - ***CHANGE0.6: In previous versions the EAZ has been given in the - highbyte of arg. - ***CHANGE0.7.1: New since this version: ServiceIndicator and AddInfo. - - ISDN_CMD_ACCEPTD: - - With this command, the HL-driver is told to accept a D-Channel-setup. - (Response to an incoming call) - - Parameter: - driver = driver-Id. - command = ISDN_CMD_ACCEPTD - arg = channel-number locally to the driver. (starting with 0) - parm = unused. - - ISDN_CMD_ACCEPTB: - - With this command, the HL-driver is told to perform a B-Channel-setup. - (after establishing D-Channel-Connection) - - Parameter: - driver = driver-Id. - command = ISDN_CMD_ACCEPTB - arg = channel-number locally to the driver. (starting with 0) - parm = unused. - - ISDN_CMD_HANGUP: - - With this command, the HL-driver is told to hangup (B-Channel if - established first, then D-Channel). This command is also used for - actively rejecting an incoming call. - - Parameter: - driver = driver-Id. - command = ISDN_CMD_HANGUP - arg = channel-number locally to the driver. (starting with 0) - parm = unused. - - ISDN_CMD_CLREAZ: - - With this command, the HL-driver is told not to signal incoming - calls to the LL. - - Parameter: - driver = driver-Id. - command = ISDN_CMD_CLREAZ - arg = channel-number locally to the driver. (starting with 0) - parm = unused. - - ISDN_CMD_SETEAZ: - - With this command, the HL-driver is told to signal incoming calls for - the given EAZs/MSNs to the LL. - - Parameter: - driver = driver-Id. - command = ISDN_CMD_SETEAZ - arg = channel-number locally to the driver. (starting with 0) - parm.num = ASCII-String, containing the desired EAZ's/MSN's - (comma-separated). If an empty String is given, the - HL-driver should respond to ALL incoming calls, - regardless of the destination-address. - ***CHANGE0.6: New since this version the "empty-string"-feature. - - ISDN_CMD_GETEAZ: (currently unused) - - With this command, the HL-driver is told to report the current setting - given with ISDN_CMD_SETEAZ. - - Parameter: - driver = driver-Id. - command = ISDN_CMD_GETEAZ - arg = channel-number locally to the driver. (starting with 0) - parm.num = ASCII-String, containing the current EAZ's/MSN's - - ISDN_CMD_SETSIL: (currently unused) - - With this command, the HL-driver is told to signal only incoming - calls with the given Service-Indicators. - - Parameter: - driver = driver-Id. - command = ISDN_CMD_SETSIL - arg = channel-number locally to the driver. (starting with 0) - parm.num = ASCII-String, containing the desired Service-Indicators. - - ISDN_CMD_GETSIL: (currently unused) - - With this command, the HL-driver is told to return the current - Service-Indicators it will respond to. - - Parameter: - driver = driver-Id. - command = ISDN_CMD_SETSIL - arg = channel-number locally to the driver. (starting with 0) - parm.num = ASCII-String, containing the current Service-Indicators. - - ISDN_CMD_SETL2: - - With this command, the HL-driver is told to select the given Layer-2- - protocol. This command is issued by the LL prior to ISDN_CMD_DIAL or - ISDN_CMD_ACCEPTD. - - - Parameter: - driver = driver-Id. - command = ISDN_CMD_SETL2 - arg = channel-number locally to the driver. (starting with 0) - logical or'ed with (protocol-Id << 8) - protocol-Id is one of the constants ISDN_PROTO_L2... - parm = unused. - - ISDN_CMD_GETL2: (currently unused) - - With this command, the HL-driver is told to return the current - setting of the Layer-2-protocol. - - Parameter: - driver = driver-Id. - command = ISDN_CMD_GETL2 - arg = channel-number locally to the driver. (starting with 0) - parm = unused. - Returnvalue: - current protocol-Id (one of the constants ISDN_L2_PROTO) - - ISDN_CMD_SETL3: - - With this command, the HL-driver is told to select the given Layer-3- - protocol. This command is issued by the LL prior to ISDN_CMD_DIAL or - ISDN_CMD_ACCEPTD. - - - Parameter: - driver = driver-Id. - command = ISDN_CMD_SETL3 - arg = channel-number locally to the driver. (starting with 0) - logical or'ed with (protocol-Id << 8) - protocol-Id is one of the constants ISDN_PROTO_L3... - parm.fax = Pointer to T30_s fax struct. (fax usage only) - - ISDN_CMD_GETL2: (currently unused) - - With this command, the HL-driver is told to return the current - setting of the Layer-3-protocol. - - Parameter: - driver = driver-Id. - command = ISDN_CMD_GETL3 - arg = channel-number locally to the driver. (starting with 0) - parm = unused. - Returnvalue: - current protocol-Id (one of the constants ISDN_L3_PROTO) - - ISDN_CMD_PROCEED: - - With this command, the HL-driver is told to proceed with a incoming call. - - Parameter: - driver = driver-Id. - command = ISDN_CMD_PROCEED - arg = channel-number locally to the driver. (starting with 0) - setup.eazmsn= empty string or string send as uus1 in DSS1 with - PROCEED message - - ISDN_CMD_ALERT: - - With this command, the HL-driver is told to alert a proceeding call. - - Parameter: - driver = driver-Id. - command = ISDN_CMD_ALERT - arg = channel-number locally to the driver. (starting with 0) - setup.eazmsn= empty string or string send as uus1 in DSS1 with - ALERT message - - ISDN_CMD_REDIR: - - With this command, the HL-driver is told to redirect a call in proceeding - or alerting state. - - Parameter: - driver = driver-Id. - command = ISDN_CMD_REDIR - arg = channel-number locally to the driver. (starting with 0) - setup.eazmsn= empty string or string send as uus1 in DSS1 protocol - setup.screen= screening indicator - setup.phone = redirected to party number - - ISDN_CMD_PROT_IO: - - With this call, the LL-driver invokes protocol specific features through - the LL. - The call is not implicitely bound to a connection. - - Parameter: - driver = driver-Id - command = ISDN_CMD_PROT_IO - arg = The lower 8 Bits define the addressed protocol as defined - in ISDN_PTYPE..., the upper bits are used to differentiate - the protocol specific CMD. - - para = protocol and function specific. See isdnif.h for detail. - - - ISDN_CMD_FAXCMD: - - With this command the HL-driver receives a fax sub-command. - For details refer to INTERFACE.fax - - Parameter: - driver = driver-Id. - command = ISDN_CMD_FAXCMD - arg = channel-number locally to the driver. (starting with 0) - parm = unused. - - -3. Description of the events to be signaled by the HL-driver to the LL. - - All status-changes are signaled via calling the previously described - function statcallb(). The field command of the struct isdn_cmd has - to be set by the HL-driver with the appropriate Status-Id (event-number). - The field arg has to be set to the channel-number (locally to the driver, - starting with 0) to which this event applies. (Exception: STAVAIL-event) - - Until now, the following Status-Ids are defined: - - ISDN_STAT_AVAIL: - - With this call, the HL-driver signals the availability of new data - for readstat(). Used only for debugging-purposes, see description - of readstat(). - - Parameter: - driver = driver-Id - command = ISDN_STAT_STAVAIL - arg = length of available data. - parm = unused. - - ISDN_STAT_ICALL: - ISDN_STAT_ICALLW: - - With this call, the HL-driver signals an incoming call to the LL. - If ICALLW is signalled the incoming call is a waiting call without - a available B-chan. - - Parameter: - driver = driver-Id - command = ISDN_STAT_ICALL - arg = channel-number, locally to the driver. (starting with 0) - para.setup.phone = Callernumber. - para.setup.eazmsn = CalledNumber. - para.setup.si1 = Service Indicator. - para.setup.si2 = Additional Service Indicator. - para.setup.plan = octet 3 from Calling party number Information Element. - para.setup.screen = octet 3a from Calling party number Information Element. - - Return: - 0 = No device matching this call. - 1 = At least one device matching this call (RING on ttyI). - HL-driver may send ALERTING on the D-channel in this case. - 2 = Call will be rejected. - 3 = Incoming called party number is currently incomplete. - Additional digits are required. - Used for signalling with PtP connections. - 4 = Call will be held in a proceeding state - (HL driver sends PROCEEDING) - Used when a user space prog needs time to interpret a call - para.setup.eazmsn may be filled with an uus1 message of - 30 octets maximum. Empty string if no uus. - 5 = Call will be actively deflected to another party - Only available in DSS1/EURO protocol - para.setup.phone must be set to destination party number - para.setup.eazmsn may be filled with an uus1 message of - 30 octets maximum. Empty string if no uus. - -1 = An error happened. (Invalid parameters for example.) - The keypad support now is included in the dial command. - - - ISDN_STAT_RUN: - - With this call, the HL-driver signals availability of the ISDN-card. - (after initializing, loading firmware) - - Parameter: - driver = driver-Id - command = ISDN_STAT_RUN - arg = unused. - parm = unused. - - ISDN_STAT_STOP: - - With this call, the HL-driver signals unavailability of the ISDN-card. - (before unloading, while resetting/reconfiguring the card) - - Parameter: - driver = driver-Id - command = ISDN_STAT_STOP - arg = unused. - parm = unused. - - ISDN_STAT_DCONN: - - With this call, the HL-driver signals the successful establishment of - a D-Channel-connection. (Response to ISDN_CMD_ACCEPTD or ISDN_CMD_DIAL) - - Parameter: - driver = driver-Id - command = ISDN_STAT_DCONN - arg = channel-number, locally to the driver. (starting with 0) - parm = unused. - - ISDN_STAT_BCONN: - - With this call, the HL-driver signals the successful establishment of - a B-Channel-connection. (Response to ISDN_CMD_ACCEPTB or because the - remote-station has initiated establishment) - - The HL driver should call this when the logical l2/l3 protocol - connection on top of the physical B-channel is established. - - Parameter: - driver = driver-Id - command = ISDN_STAT_BCONN - arg = channel-number, locally to the driver. (starting with 0) - parm.num = ASCII-String, containing type of connection (for analog - modem only). This will be appended to the CONNECT message - e.g. 14400/V.32bis - - ISDN_STAT_DHUP: - - With this call, the HL-driver signals the shutdown of a - D-Channel-connection. This could be a response to a prior ISDN_CMD_HANGUP, - or caused by a remote-hangup or if the remote-station has actively - rejected a call. - - Parameter: - driver = driver-Id - command = ISDN_STAT_DHUP - arg = channel-number, locally to the driver. (starting with 0) - parm = unused. - - ISDN_STAT_BHUP: - - With this call, the HL-driver signals the shutdown of a - B-Channel-connection. This could be a response to a prior ISDN_CMD_HANGUP, - or caused by a remote-hangup. - - The HL driver should call this as soon as the logical l2/l3 protocol - connection on top of the physical B-channel is released. - - Parameter: - driver = driver-Id - command = ISDN_STAT_BHUP - arg = channel-number, locally to the driver. (starting with 0) - parm = unused. - - ISDN_STAT_CINF: - - With this call, the HL-driver delivers charge-unit information to the - LL. - - Parameter: - driver = driver-Id - command = ISDN_STAT_CINF - arg = channel-number, locally to the driver. (starting with 0) - parm.num = ASCII string containing charge-units (digits only). - - ISDN_STAT_LOAD: (currently unused) - - ISDN_STAT_UNLOAD: - - With this call, the HL-driver signals that it will be unloaded now. This - tells the LL to release all corresponding data-structures. - - Parameter: - driver = driver-Id - command = ISDN_STAT_UNLOAD - arg = unused. - parm = unused. - - ISDN_STAT_BSENT: - - With this call the HL-driver signals the delivery of a data-packet. - This callback is used by the network-interfaces only, tty-Emulation - does not need this call. - - Parameter: - driver = driver-Id - command = ISDN_STAT_BSENT - arg = channel-number, locally to the driver. (starting with 0) - parm.length = ***CHANGEI.1.21: New field. - the driver has to set this to the original length - of the skb at the time of receiving it from the linklevel. - - ISDN_STAT_NODCH: - - With this call, the driver has to respond to a prior ISDN_CMD_DIAL, if - no D-Channel is available. - - Parameter: - driver = driver-Id - command = ISDN_STAT_NODCH - arg = channel-number, locally to the driver. (starting with 0) - parm = unused. - - ISDN_STAT_ADDCH: - - This call is for HL-drivers, which are unable to check card-type - or numbers of supported channels before they have loaded any firmware - using ioctl. Those HL-driver simply set the channel-parameter to a - minimum channel-number when registering, and later if they know - the real amount, perform this call, allocating additional channels. - - Parameter: - driver = driver-Id - command = ISDN_STAT_ADDCH - arg = number of channels to be added. - parm = unused. - - ISDN_STAT_CAUSE: - - With this call, the HL-driver delivers CAUSE-messages to the LL. - Currently the LL does not use this messages. Their contents is simply - logged via kernel-messages. Therefore, currently the format of the - messages is completely free. However they should be printable. - - Parameter: - driver = driver-Id - command = ISDN_STAT_NODCH - arg = channel-number, locally to the driver. (starting with 0) - parm.num = ASCII string containing CAUSE-message. - - ISDN_STAT_DISPLAY: - - With this call, the HL-driver delivers DISPLAY-messages to the LL. - Currently the LL does not use this messages. - - Parameter: - driver = driver-Id - command = ISDN_STAT_DISPLAY - arg = channel-number, locally to the driver. (starting with 0) - para.display= string containing DISPLAY-message. - - ISDN_STAT_PROT: - - With this call, the HL-driver delivers protocol specific infos to the LL. - The call is not implicitely bound to a connection. - - Parameter: - driver = driver-Id - command = ISDN_STAT_PROT - arg = The lower 8 Bits define the addressed protocol as defined - in ISDN_PTYPE..., the upper bits are used to differentiate - the protocol specific STAT. - - para = protocol and function specific. See isdnif.h for detail. - - ISDN_STAT_DISCH: - - With this call, the HL-driver signals the LL to disable or enable the - use of supplied channel and driver. - The call may be used to reduce the available number of B-channels after - loading the driver. The LL has to ignore a disabled channel when searching - for free channels. The HL driver itself never delivers STAT callbacks for - disabled channels. - The LL returns a nonzero code if the operation was not successful or the - selected channel is actually regarded as busy. - - Parameter: - driver = driver-Id - command = ISDN_STAT_DISCH - arg = channel-number, locally to the driver. (starting with 0) - parm.num[0] = 0 if channel shall be disabled, else enabled. - - ISDN_STAT_L1ERR: - - ***CHANGEI1.21 new status message. - A signal can be sent to the linklevel if an Layer1-error results in - packet-loss on receive or send. The field errcode of the cmd.parm - union describes the error more precisely. - - Parameter: - driver = driver-Id - command = ISDN_STAT_L1ERR - arg = channel-number, locally to the driver. (starting with 0) - parm.errcode= ISDN_STAT_L1ERR_SEND: Packet lost while sending. - ISDN_STAT_L1ERR_RECV: Packet lost while receiving. - ISDN_STAT_FAXIND: - - With this call the HL-driver signals a fax sub-command to the LL. - For details refer to INTERFACE.fax - - Parameter: - driver = driver-Id. - command = ISDN_STAT_FAXIND - arg = channel-number, locally to the driver. (starting with 0) - parm = unused. - diff --git a/Documentation/isdn/INTERFACE.fax b/Documentation/isdn/INTERFACE.fax deleted file mode 100644 index 9c8c6d914ec7..000000000000 --- a/Documentation/isdn/INTERFACE.fax +++ /dev/null @@ -1,163 +0,0 @@ -$Id: INTERFACE.fax,v 1.2 2000/08/06 09:22:50 armin Exp $ - - -Description of the fax-subinterface between linklevel and hardwarelevel of - isdn4linux. - - The communication between linklevel (LL) and hardwarelevel (HL) for fax - is based on the struct T30_s (defined in isdnif.h). - This struct is allocated in the LL. - In order to use fax, the LL provides the pointer to this struct with the - command ISDN_CMD_SETL3 (parm.fax). This pointer expires in case of hangup - and when a new channel to a new connection is assigned. - - -Data handling: - In send-mode the HL-driver has to handle the codes and the bit-order - conversion by itself. - In receive-mode the LL-driver takes care of the bit-order conversion - (specified by +FBOR) - -Structure T30_s description: - - This structure stores the values (set by AT-commands), the remote- - capability-values and the command-codes between LL and HL. - - If the HL-driver receives ISDN_CMD_FAXCMD, all needed information - is in this struct set by the LL. - To signal information to the LL, the HL-driver has to set the - parameters and use ISDN_STAT_FAXIND. - (Please refer to INTERFACE) - -Structure T30_s: - - All members are 8-bit unsigned (__u8) - - - resolution - - rate - - width - - length - - compression - - ecm - - binary - - scantime - - id[] - Local faxmachine's parameters, set by +FDIS, +FDCS, +FLID, ... - - - r_resolution - - r_rate - - r_width - - r_length - - r_compression - - r_ecm - - r_binary - - r_scantime - - r_id[] - Remote faxmachine's parameters. To be set by HL-driver. - - - phase - Defines the actual state of fax connection. Set by HL or LL - depending on progress and type of connection. - If the phase changes because of an AT command, the LL driver - changes this value. Otherwise the HL-driver takes care of it, but - only necessary on call establishment (from IDLE to PHASE_A). - (one of the constants ISDN_FAX_PHASE_[IDLE,A,B,C,D,E]) - - - direction - Defines outgoing/send or incoming/receive connection. - (ISDN_TTY_FAX_CONN_[IN,OUT]) - - - code - Commands from LL to HL; possible constants : - ISDN_TTY_FAX_DR signals +FDR command to HL - - ISDN_TTY_FAX_DT signals +FDT command to HL - - ISDN_TTY_FAX_ET signals +FET command to HL - - - Other than that the "code" is set with the hangup-code value at - the end of connection for the +FHNG message. - - - r_code - Commands from HL to LL; possible constants : - ISDN_TTY_FAX_CFR output of +FCFR message. - - ISDN_TTY_FAX_RID output of remote ID set in r_id[] - (+FCSI/+FTSI on send/receive) - - ISDN_TTY_FAX_DCS output of +FDCS and CONNECT message, - switching to phase C. - - ISDN_TTY_FAX_ET signals end of data, - switching to phase D. - - ISDN_TTY_FAX_FCON signals the established, outgoing connection, - switching to phase B. - - ISDN_TTY_FAX_FCON_I signals the established, incoming connection, - switching to phase B. - - ISDN_TTY_FAX_DIS output of +FDIS message and values. - - ISDN_TTY_FAX_SENT signals that all data has been sent - and is acknowledged, - OK message will be sent. - - ISDN_TTY_FAX_PTS signals a msg-confirmation (page sent successful), - depending on fet value: - 0: output OK message (more pages follow) - 1: switching to phase B (next document) - - ISDN_TTY_FAX_TRAIN_OK output of +FDCS and OK message (for receive mode). - - ISDN_TTY_FAX_EOP signals end of data in receive mode, - switching to phase D. - - ISDN_TTY_FAX_HNG output of the +FHNG and value set by code and - OK message, switching to phase E. - - - - badlin - Value of +FBADLIN - - - badmul - Value of +FBADMUL - - - bor - Value of +FBOR - - - fet - Value of +FET command in send-mode. - Set by HL in receive-mode for +FET message. - - - pollid[] - ID-string, set by +FCIG - - - cq - Value of +FCQ - - - cr - Value of +FCR - - - ctcrty - Value of +FCTCRTY - - - minsp - Value of +FMINSP - - - phcto - Value of +FPHCTO - - - rel - Value of +FREL - - - nbc - Value of +FNBC (0,1) - (+FNBC is not a known class 2 fax command, I added this to change the - automatic "best capabilities" connection in the eicon HL-driver) - - -Armin -mac@melware.de - diff --git a/Documentation/isdn/README b/Documentation/isdn/README deleted file mode 100644 index 74bd2bdb455b..000000000000 --- a/Documentation/isdn/README +++ /dev/null @@ -1,599 +0,0 @@ -README for the ISDN-subsystem - -1. Preface - - 1.1 Introduction - - This README describes how to set up and how to use the different parts - of the ISDN-subsystem. - - For using the ISDN-subsystem, some additional userlevel programs are - necessary. Those programs and some contributed utilities are available - at - - ftp.isdn4linux.de - - /pub/isdn4linux/isdn4k-utils-.tar.gz - - - We also have set up a mailing-list: - - The isdn4linux-project originates in Germany, and therefore by historical - reasons, the mailing-list's primary language is german. However mails - written in english have been welcome all the time. - - to subscribe: write a email to majordomo@listserv.isdn4linux.de, - Subject irrelevant, in the message body: - subscribe isdn4linux - - To write to the mailing-list, write to isdn4linux@listserv.isdn4linux.de - - This mailinglist is bidirectionally gated to the newsgroup - - de.alt.comm.isdn4linux - - There is also a well maintained FAQ in English available at - https://www.mhessler.de/i4lfaq/ - It can be viewed online, or downloaded in sgml/text/html format. - The FAQ can also be viewed online at - https://www.isdn4linux.de/faq/i4lfaq.html - or downloaded from - ftp://ftp.isdn4linux.de/pub/isdn4linux/FAQ/ - - 1.1 Technical details - - In the following Text, the terms MSN and EAZ are used. - - MSN is the abbreviation for (M)ultiple(S)ubscriber(N)umber, and applies - to Euro(EDSS1)-type lines. Usually it is simply the phone number. - - EAZ is the abbreviation of (E)ndgeraete(A)uswahl(Z)iffer and - applies to German 1TR6-type lines. This is a one-digit string, - simply appended to the base phone number - - The internal handling is nearly identical, so replace the appropriate - term to that one, which applies to your local ISDN-environment. - - When the link-level-module isdn.o is loaded, it supports up to 16 - low-level-modules with up to 64 channels. (The number 64 is arbitrarily - chosen and can be configured at compile-time --ISDN_MAX in isdn.h). - A low-level-driver can register itself through an interface (which is - defined in isdnif.h) and gets assigned a slot. - The following char-devices are made available for each channel: - - A raw-control-device with the following functions: - write: raw D-channel-messages (format: depends on driver). - read: raw D-channel-messages (format: depends on driver). - ioctl: depends on driver, i.e. for the ICN-driver, the base-address of - the ports and the shared memory on the card can be set and read - also the boot-code and the protocol software can be loaded into - the card. - - O N L Y !!! for debugging (no locking against other devices): - One raw-data-device with the following functions: - write: data to B-channel. - read: data from B-channel. - - In addition the following devices are made available: - - 128 tty-devices (64 cuix and 64 ttyIx) with integrated modem-emulator: - The functionality is almost the same as that of a serial device - (the line-discs are handled by the kernel), which lets you run - SLIP, CSLIP and asynchronous PPP through the devices. We have tested - Seyon, minicom, CSLIP (uri-dip) PPP, mgetty, XCept and Hylafax. - - The modem-emulation supports the following: - 1.3.1 Commands: - - ATA Answer incoming call. - ATD Dial, the number may contain: - [0-9] and [,#.*WPT-S] - the latter are ignored until 'S'. - The 'S' must precede the number, if - the line is a SPV (German 1TR6). - ATE0 Echo off. - ATE1 Echo on (default). - ATH Hang-up. - ATH1 Off hook (ignored). - ATH0 Hang-up. - ATI Return "ISDN for Linux...". - ATI0 " - ATI1 " - ATI2 Report of last connection. - ATO On line (data mode). - ATQ0 Enable result codes (default). - ATQ1 Disable result codes (default). - ATSx=y Set register x to y. - ATSx? Show contents of register x. - ATV0 Numeric responses. - ATV1 English responses (default). - ATZ Load registers and EAZ/MSN from Profile. - AT&Bx Set Send-Packet-size to x (max. 4000) - The real packet-size may be limited by the - low-level-driver used. e.g. the HiSax-Module- - limit is 2000. You will get NO Error-Message, - if you set it to higher values, because at the - time of giving this command the corresponding - driver may not be selected (see "Automatic - Assignment") however the size of outgoing packets - will be limited correctly. - AT&D0 Ignore DTR - AT&D2 DTR-low-edge: Hang up and return to - command mode (default). - AT&D3 Same as AT&D2 but also resets all registers. - AT&Ex Set the EAZ/MSN for this channel to x. - AT&F Reset all registers and profile to "factory-defaults" - AT&Lx Set list of phone numbers to listen on. x is a - list of wildcard patterns separated by semicolon. - If this is set, it has precedence over the MSN set - by AT&E. - AT&Rx Select V.110 bitrate adaption. - This command enables V.110 protocol with 9600 baud - (x=9600), 19200 baud (x=19200) or 38400 baud - (x=38400). A value of x=0 disables V.110 switching - back to default X.75. This command sets the following - Registers: - Reg 14 (Layer-2 protocol): - x = 0: 0 - x = 9600: 7 - x = 19200: 8 - x = 38400: 9 - Reg 18.2 = 1 - Reg 19 (Additional Service Indicator): - x = 0: 0 - x = 9600: 197 - x = 19200: 199 - x = 38400: 198 - Note on value in Reg 19: - There is _NO_ common convention for 38400 baud. - The value 198 is chosen arbitrarily. Users - _MUST_ negotiate this value before establishing - a connection. - AT&Sx Set window-size (x = 1..8) (not yet implemented) - AT&V Show all settings. - AT&W0 Write registers and EAZ/MSN to profile. See also - iprofd (5.c in this README). - AT&X0 BTX-mode and T.70-mode off (default) - AT&X1 BTX-mode on. (S13.1=1, S13.5=0 S14=0, S16=7, S18=7, S19=0) - AT&X2 T.70-mode on. (S13.1=1, S13.5=1, S14=0, S16=7, S18=7, S19=0) - AT+Rx Resume a suspended call with CallID x (x = 1,2,3...) - AT+Sx Suspend a call with CallID x (x = 1,2,3...) - - For voice-mode commands refer to README.audio - - 1.3.2 Escape sequence: - During a connection, the emulation reacts just like - a normal modem to the escape sequence +++. - (The escape character - default '+' - can be set in the - register 2). - The DELAY must at least be 1.5 seconds long and delay - between the escape characters must not exceed 0.5 seconds. - - 1.3.3 Registers: - - Nr. Default Description - 0 0 Answer on ring number. - (no auto-answer if S0=0). - 1 0 Count of rings. - 2 43 Escape character. - (a value >= 128 disables the escape sequence). - 3 13 Carriage return character (ASCII). - 4 10 Line feed character (ASCII). - 5 8 Backspace character (ASCII). - 6 3 Delay in seconds before dialing. - 7 60 Wait for carrier. - 8 2 Pause time for comma (ignored) - 9 6 Carrier detect time (ignored) - 10 7 Carrier loss to disconnect time (ignored). - 11 70 Touch tone timing (ignored). - 12 69 Bit coded register: - Bit 0: 0 = Suppress response messages. - 1 = Show response messages. - Bit 1: 0 = English response messages. - 1 = Numeric response messages. - Bit 2: 0 = Echo off. - 1 = Echo on. - Bit 3 0 = DCD always on. - 1 = DCD follows carrier. - Bit 4 0 = CTS follows RTS - 1 = Ignore RTS, CTS always on. - Bit 5 0 = return to command mode on DTR low. - 1 = Same as 0 but also resets all - registers. - See also register 13, bit 2 - Bit 6 0 = DSR always on. - 1 = DSR only on if channel is available. - Bit 7 0 = Cisco-PPP-flag-hack off (default). - 1 = Cisco-PPP-flag-hack on. - 13 0 Bit coded register: - Bit 0: 0 = Use delayed tty-send-algorithm - 1 = Direct tty-send. - Bit 1: 0 = T.70 protocol (Only for BTX!) off - 1 = T.70 protocol (Only for BTX!) on - Bit 2: 0 = Don't hangup on DTR low. - 1 = Hangup on DTR low. - Bit 3: 0 = Standard response messages - 1 = Extended response messages - Bit 4: 0 = CALLER NUMBER before every RING. - 1 = CALLER NUMBER after first RING. - Bit 5: 0 = T.70 extended protocol off - 1 = T.70 extended protocol on - Bit 6: 0 = Special RUNG Message off - 1 = Special RUNG Message on - "RUNG" is delivered on a ttyI, if - an incoming call happened (RING) and - the remote party hung up before any - local ATA was given. - Bit 7: 0 = Don't show display messages from net - 1 = Show display messages from net - (S12 Bit 1 must be 0 too) - 14 0 Layer-2 protocol: - 0 = X75/LAPB with I-frames - 1 = X75/LAPB with UI-frames - 2 = X75/LAPB with BUI-frames - 3 = HDLC - 4 = Transparent (audio) - 7 = V.110, 9600 baud - 8 = V.110, 19200 baud - 9 = V.110, 38400 baud - 10 = Analog Modem (only if hardware supports this) - 11 = Fax G3 (only if hardware supports this) - 15 0 Layer-3 protocol: - 0 = transparent - 1 = transparent with audio features (e.g. DSP) - 2 = Fax G3 Class 2 commands (S14 has to be set to 11) - 3 = Fax G3 Class 1 commands (S14 has to be set to 11) - 16 250 Send-Packet-size/16 - 17 8 Window-size (not yet implemented) - 18 4 Bit coded register, Service-Octet-1 to accept, - or to be used on dialout: - Bit 0: Service 1 (audio) when set. - Bit 1: Service 5 (BTX) when set. - Bit 2: Service 7 (data) when set. - Note: It is possible to set more than one - bit. In this case, on incoming calls - the selected services are accepted, - and if the service is "audio", the - Layer-2-protocol is automatically - changed to 4 regardless of the setting - of register 14. On outgoing calls, - the most significant 1-bit is chosen to - select the outgoing service octet. - 19 0 Service-Octet-2 - 20 0 Bit coded register (readonly) - Service-Octet-1 of last call. - Bit mapping is the same as register 18 - 21 0 Bit coded register (readonly) - Set on incoming call (during RING) to - octet 3 of calling party number IE (Numbering plan) - See section 4.5.10 of ITU Q.931 - 22 0 Bit coded register (readonly) - Set on incoming call (during RING) to - octet 3a of calling party number IE (Screening info) - See section 4.5.10 of ITU Q.931 - 23 0 Bit coded register: - Bit 0: 0 = Add CPN to RING message off - 1 = Add CPN to RING message on - Bit 1: 0 = Add CPN to FCON message off - 1 = Add CPN to FCON message on - Bit 2: 0 = Add CDN to RING/FCON message off - 1 = Add CDN to RING/FCON message on - - Last but not least a (at the moment fairly primitive) device to request - the line-status (/dev/isdninfo) is made available. - - Automatic assignment of devices to lines: - - All inactive physical lines are listening to all EAZs for incoming - calls and are NOT assigned to a specific tty or network interface. - When an incoming call is detected, the driver looks first for a network - interface and then for an opened tty which: - - 1. is configured for the same EAZ. - 2. has the same protocol settings for the B-channel. - 3. (only for network interfaces if the security flag is set) - contains the caller number in its access list. - 4. Either the channel is not bound exclusively to another Net-interface, or - it is bound AND the other checks apply to exactly this interface. - (For usage of the bind-features, refer to the isdnctrl-man-page) - - Only when a matching interface or tty is found is the call accepted - and the "connection" between the low-level-layer and the link-level-layer - is established and kept until the end of the connection. - In all other cases no connection is established. Isdn4linux can be - configured to either do NOTHING in this case (which is useful, if - other, external devices with the same EAZ/MSN are connected to the bus) - or to reject the call actively. (isdnctrl busreject ...) - - For an outgoing call, the inactive physical lines are searched. - The call is placed on the first physical line, which supports the - requested protocols for the B-channel. If a net-interface, however - is pre-bound to a channel, this channel is used directly. - - This makes it possible to configure several network interfaces and ttys - for one EAZ, if the network interfaces are set to secure operation. - If an incoming call matches one network interface, it gets connected to it. - If another incoming call for the same EAZ arrives, which does not match - a network interface, the first tty gets a "RING" and so on. - -2 System prerequisites: - - ATTENTION! - - Always use the latest module utilities. The current version is - named in Documentation/Changes. Some old versions of insmod - are not capable of setting the driver-Ids correctly. - -3. Lowlevel-driver configuration. - - Configuration depends on how the drivers are built. See the - README. for information on driver-specific setup. - -4. Device-inodes - - The major and minor numbers and their names are described in - Documentation/admin-guide/devices.rst. The major numbers are: - - 43 for the ISDN-tty's. - 44 for the ISDN-callout-tty's. - 45 for control/info/debug devices. - -5. Application - - a) For some card-types, firmware has to be loaded into the cards, before - proceeding with device-independent setup. See README. - for how to do that. - - b) If you only intend to use ttys, you are nearly ready now. - - c) If you want to have really permanent "Modem"-settings on disk, you - can start the daemon iprofd. Give it a path to a file at the command- - line. It will store the profile-settings in this file every time - an AT&W0 is performed on any ISDN-tty. If the file already exists, - all profiles are initialized from this file. If you want to unload - any of the modules, kill iprofd first. - - d) For networking, continue: Create an interface: - isdnctrl addif isdn0 - - e) Set the EAZ (or MSN for Euro-ISDN): - isdnctrl eaz isdn0 2 - - (For 1TR6 a single digit is allowed, for Euro-ISDN the number is your - real MSN e.g.: Phone-Number) - - f) Set the number for outgoing calls on the interface: - isdnctrl addphone isdn0 out 1234567 - ... (this can be executed more than once, all assigned numbers are - tried in order) - and the number(s) for incoming calls: - isdnctrl addphone isdn0 in 1234567 - - g) Set the timeout for hang-up: - isdnctrl huptimeout isdn0 - - h) additionally you may activate charge-hang-up (= Hang up before - next charge-info, this only works, if your isdn-provider transmits - the charge-info during and after the connection): - isdnctrl chargehup isdn0 on - - i) Set the dial mode of the interface: - isdnctrl dialmode isdn0 auto - "off" means that you (or the system) cannot make any connection - (neither incoming or outgoing connections are possible). Use - this if you want to be sure that no connections will be made. - "auto" means that the interface is in auto-dial mode, and will - attempt to make a connection whenever a network data packet needs - the interface's link. Note that this can cause unexpected dialouts, - and lead to a high phone bill! Some daemons or other pc's that use - this interface can cause this. - Incoming connections are also possible. - "manual" is a dial mode created to prevent the unexpected dialouts. - In this mode, the interface will never make any connections on its - own. You must explicitly initiate a connection with "isdnctrl dial - isdn0". However, after an idle time of no traffic as configured for - the huptimeout value with isdnctrl, the connection _will_ be ended. - If you don't want any automatic hangup, set the huptimeout value to 0. - "manual" is the default. - - j) Setup the interface with ifconfig as usual, and set a route to it. - - k) (optional) If you run X11 and have Tcl/Tk-wish version 4.0, you can use - the script tools/tcltk/isdnmon. You can add actions for line-status - changes. See the comments at the beginning of the script for how to - do that. There are other tty-based tools in the tools-subdirectory - contributed by Michael Knigge (imon), Volker Götz (imontty) and - Andreas Kool (isdnmon). - - l) For initial testing, you can set the verbose-level to 2 (default: 0). - Then all incoming calls are logged, even if they are not addressed - to one of the configured net-interfaces: - isdnctrl verbose 2 - - Now you are ready! A ping to the set address should now result in an - automatic dial-out (look at syslog kernel-messages). - The phone numbers and EAZs can be assigned at any time with isdnctrl. - You can add as many interfaces as you like with addif following the - directions above. Of course, there may be some limitations. But we have - tested as many as 20 interfaces without any problem. However, if you - don't give an interface name to addif, the kernel will assign a name - which starts with "eth". The number of "eth"-interfaces is limited by - the kernel. - -5. Additional options for isdnctrl: - - "isdnctrl secure on" - Only incoming calls, for which the caller-id is listed in the access - list of the interface are accepted. You can add caller-id's With the - command "isdnctrl addphone in " - Euro-ISDN does not transmit the leading '0' of the caller-id for an - incoming call, therefore you should configure it accordingly. - If the real number for the dialout e.g. is "09311234567" the number - to configure here is "9311234567". The pattern-match function - works similar to the shell mechanism. - - ? one arbitrary digit - * zero or arbitrary many digits - [123] one of the digits in the list - [1-5] one digit between '1' and '5' - a '^' as the first character in a list inverts the list - - - "isdnctrl secure off" - Switch off secure operation (default). - - "isdnctrl ihup [on|off]" - Switch the hang-up-timer for incoming calls on or off. - - "isdnctrl eaz " - Returns the EAZ of an interface. - - "isdnctrl delphone in|out " - Deletes a number from one of the access-lists of the interface. - - "isdnctrl delif " - Removes the interface (and possible slaves) from the kernel. - (You have to unregister it with "ifconfig down" before). - - "isdnctrl callback [on|off]" - Switches an interface to callback-mode. In this mode, an incoming call - will be rejected and after this the remote-station will be called. If - you test this feature by using ping, some routers will re-dial very - quickly, so that the callback from isdn4linux may not be recognized. - In this case use ping with the option -i to increase the interval - between echo-packets. - - "isdnctrl cbdelay [seconds]" - Sets the delay (default 5 sec) between an incoming call and start of - dialing when callback is enabled. - - "isdnctrl cbhup [on|off]" - This enables (default) or disables an active hangup (reject) when getting an - incoming call for an interface which is configured for callback. - - "isdnctrl encap " - Selects the type of packet-encapsulation. The encapsulation can be changed - only while an interface is down. - - At the moment the following values are supported: - - rawip (Default) Selects raw-IP-encapsulation. This means, MAC-headers - are stripped off. - ip IP with type-field. Same as IP but the type-field of the MAC-header - is preserved. - x25iface X.25 interface encapsulation (first byte semantics as defined in - ../networking/x25-iface.txt). Use this for running the linux - X.25 network protocol stack (AF_X25 sockets) on top of isdn. - cisco-h A special-mode for communicating with a Cisco, which is configured - to do "hdlc" - ethernet No stripping. Packets are sent with full MAC-header. - The Ethernet-address of the interface is faked, from its - IP-address: fc:fc:i1:i2:i3:i4, where i1-4 are the IP-addr.-values. - syncppp Synchronous PPP - - uihdlc HDLC with UI-frame-header (for use with DOS ISPA, option -h1) - - - NOTE: x25iface encapsulation is currently experimental. Please - read README.x25 for further details - - - Watching packets, using standard-tcpdump will fail for all encapsulations - except ethernet because tcpdump does not know how to handle packets - without MAC-header. A patch for tcpdump is included in the utility-package - mentioned above. - - "isdnctrl l2_prot " - Selects a layer-2-protocol. - (With the ICN-driver and the HiSax-driver, "x75i" and "hdlc" is available. - With other drivers, "x75ui", "x75bui", "x25dte", "x25dce" may be - possible too. See README.x25 for x25 related l2 protocols.) - - isdnctrl l3_prot - The same for layer-3. (At the moment only "trans" is allowed) - - "isdnctrl list " - Shows all parameters of an interface and the charge-info. - Try "all" as the interface name. - - "isdnctrl hangup " - Forces hangup of an interface. - - "isdnctrl bind , [exclusive]" - If you are using more than one ISDN card, it is sometimes necessary to - dial out using a specific card or even preserve a specific channel for - dialout of a specific net-interface. This can be done with the above - command. Replace by whatever you assigned while loading the - module. The is counted from zero. The upper limit - depends on the card used. At the moment no card supports more than - 2 channels, so the upper limit is one. - - "isdnctrl unbind " - unbinds a previously bound interface. - - "isdnctrl busreject on|off" - If switched on, isdn4linux replies a REJECT to incoming calls, it - cannot match to any configured interface. - If switched off, nothing happens in this case. - You normally should NOT enable this feature, if the ISDN adapter is not - the only device connected to the S0-bus. Otherwise it could happen that - isdn4linux rejects an incoming call, which belongs to another device on - the bus. - - "isdnctrl addslave - Creates a slave interface for channel-bundling. Slave interfaces are - not seen by the kernel, but their ISDN-part can be configured with - isdnctrl as usual. (Phone numbers, EAZ/MSN, timeouts etc.) If more - than two channels are to be bundled, feel free to create as many as you - want. InterfaceName must be a real interface, NOT a slave. Slave interfaces - start dialing, if the master interface resp. the previous slave interface - has a load of more than 7000 cps. They hangup if the load goes under 7000 - cps, according to their "huptimeout"-parameter. - - "isdnctrl sdelay secs." - This sets the minimum time an Interface has to be fully loaded, until - it sends a dial-request to its slave. - - "isdnctrl dial " - Forces an interface to start dialing even if no packets are to be - transferred. - - "isdnctrl mapping MSN0,MSN1,MSN2,...MSN9" - This installs a mapping table for EAZ<->MSN-mapping for a single line. - Missing MSN's have to be given as "-" or can be omitted, if at the end - of the commandline. - With this command, it's now possible to have an interface listening to - mixed 1TR6- and Euro-Type lines. In this case, the interface has to be - configured to a 1TR6-type EAZ (one digit). The mapping is also valid - for tty-emulation. Seen from the interface/tty-level the mapping - CAN be used, however it's possible to use single tty's/interfaces with - real MSN's (more digits) also, in which case the mapping will be ignored. - Here is an example: - - You have a 1TR6-type line with base-nr. 1234567 and a Euro-line with - MSN's 987654, 987655 and 987656. The DriverId for the Euro-line is "EURO". - - isdnctrl mapping EURO -,987654,987655,987656,-,987655 - ... - isdnctrl eaz isdn0 1 # listen on 12345671(1tr6) and 987654(euro) - ... - isdnctrl eaz isdn1 4 # listen on 12345674(1tr6) only. - ... - isdnctrl eaz isdn2 987654 # listen on 987654(euro) only. - - Same scheme is used with AT&E... at the tty's. - -6. If you want to write a new low-level-driver, you are welcome. - The interface to the link-level-module is described in the file INTERFACE. - If the interface should be expanded for any reason, don't do it - on your own, send me a mail containing the proposed changes and - some reasoning about them. - If other drivers will not be affected, I will include the changes - in the next release. - For developers only, there is a second mailing-list. Write to me - (fritz@isdn4linux.de), if you want to join that list. - -Have fun! - - -Fritz - diff --git a/Documentation/isdn/README.FAQ b/Documentation/isdn/README.FAQ deleted file mode 100644 index e5dd1addacdd..000000000000 --- a/Documentation/isdn/README.FAQ +++ /dev/null @@ -1,26 +0,0 @@ - -The FAQ for isdn4linux -====================== - -Please note that there is a big FAQ available in the isdn4k-utils. -You find it in: - isdn4k-utils/FAQ/i4lfaq.sgml - -In case you just want to see the FAQ online, or download the newest version, -you can have a look at my website: -https://www.mhessler.de/i4lfaq/ (view + download) -or: -https://www.isdn4linux.de/faq/4lfaq.html (view) - -As the extension tells, the FAQ is in SGML format, and you can convert it -into text/html/... format by using the sgml2txt/sgml2html/... tools. -Alternatively, you can also do a 'configure; make all' in the FAQ directory. - - -Please have a look at the FAQ before posting anything in the Mailinglist, -or the newsgroup! - - -Matthias Hessler -hessler@isdn4linux.de - diff --git a/Documentation/isdn/README.audio b/Documentation/isdn/README.audio deleted file mode 100644 index 8ebca19290d9..000000000000 --- a/Documentation/isdn/README.audio +++ /dev/null @@ -1,138 +0,0 @@ -$Id: README.audio,v 1.8 1999/07/11 17:17:29 armin Exp $ - -ISDN subsystem for Linux. - Description of audio mode. - -When enabled during kernel configuration, the tty emulator of the ISDN -subsystem is capable of a reduced set of commands to support audio. -This document describes the commands supported and the format of -audio data. - -Commands for enabling/disabling audio mode: - - AT+FCLASS=8 Enable audio mode. - This affects the following registers: - S18: Bits 0 and 2 are set. - S16: Set to 48 and any further change to - larger values is blocked. - AT+FCLASS=0 Disable audio mode. - Register 18 is set to 4. - AT+FCLASS=? Show possible modes. - AT+FCLASS? Report current mode (0 or 8). - -Commands supported in audio mode: - -All audio mode commands have one of the following forms: - - AT+Vxx? Show current setting. - AT+Vxx=? Show possible settings. - AT+Vxx=v Set simple parameter. - AT+Vxx=v,v ... Set complex parameter. - -where xx is a two-character code and v are alphanumerical parameters. -The following commands are supported: - - AT+VNH=x Auto hangup setting. NO EFFECT, supported - for compatibility only. - AT+VNH? Always reporting "1" - AT+VNH=? Always reporting "1" - - AT+VIP Reset all audio parameters. - - AT+VLS=x Line select. x is one of the following: - 0 = No device. - 2 = Phone line. - AT+VLS=? Always reporting "0,2" - AT+VLS? Show current line. - - AT+VRX Start recording. Emulator responds with - CONNECT and starts sending audio data to - the application. See below for data format - - AT+VSD=x,y Set silence-detection parameters. - Possible parameters: - x = 0 ... 31 sensitivity threshold level. - (default 0 , deactivated) - y = 0 ... 255 range of interval in units - of 0.1 second. (default 70) - AT+VSD=? Report possible parameters. - AT+VSD? Show current parameters. - - AT+VDD=x,y Set DTMF-detection parameters. - Only possible if online and during this connection. - Possible parameters: - x = 0 ... 15 sensitivity threshold level. - (default 0 , I4L soft-decode) - (1-15 soft-decode off, hardware on) - y = 0 ... 255 tone duration in units of 5ms. - Not for I4L soft decode (default 8, 40ms) - AT+VDD=? Report possible parameters. - AT+VDD? Show current parameters. - - AT+VSM=x Select audio data format. - Possible parameters: - 2 = ADPCM-2 - 3 = ADPCM-3 - 4 = ADPCM-4 - 5 = aLAW - 6 = uLAW - AT+VSM=? Show possible audio formats. - - AT+VTX Start audio playback. Emulator responds - with CONNECT and starts sending audio data - received from the application via phone line. -General behavior and description of data formats/protocol. - when a connection is made: - - On incoming calls, if the application responds to a RING - with ATA, depending on the calling service, the emulator - responds with either CONNECT (data call) or VCON (voice call). - - On outgoing voice calls, the emulator responds with VCON - upon connection setup. - - Audio recording. - - When receiving audio data, a kind of bisync protocol is used. - Upon AT+VRX command, the emulator responds with CONNECT, and - starts sending audio data to the application. There are several - escape sequences defined, all using DLE (0x10) as Escape char: - - End of audio data. (i.e. caused by a - hangup of the remote side) Emulator stops - recording, responding with VCON. - Abort recording, (send by appl.) Emulator - stops recording, sends DLE,ETX. - Escape sequence for DLE in data stream. - 0 Touchtone "0" received. - ... - 9 Touchtone "9" received. - # Touchtone "#" received. - * Touchtone "*" received. - A Touchtone "A" received. - B Touchtone "B" received. - C Touchtone "C" received. - D Touchtone "D" received. - - q quiet. Silence detected after non-silence. - s silence. Silence detected from the - start of recording. - - Currently unsupported DLE sequences: - - c FAX calling tone received. - b busy tone received. - - Audio playback. - - When sending audio data, upon AT+VTX command, emulator responds with - CONNECT, and starts transferring data from application to the phone line. - The same DLE sequences apply to this mode. - - Full-Duplex-Audio: - - When _both_ commands for recording and playback are given in _one_ - AT-command-line (i.e.: "AT+VTX+VRX"), full-duplex-mode is selected. - In this mode, the only way to stop recording is sending - and the only way to stop playback is to send . - diff --git a/Documentation/isdn/README.concap b/Documentation/isdn/README.concap deleted file mode 100644 index a76d74845a4c..000000000000 --- a/Documentation/isdn/README.concap +++ /dev/null @@ -1,259 +0,0 @@ -Description of the "concap" encapsulation protocol interface -============================================================ - -The "concap" interface is intended to be used by network device -drivers that need to process an encapsulation protocol. -It is assumed that the protocol interacts with a linux network device by -- data transmission -- connection control (establish, release) -Thus, the mnemonic: "CONnection CONtrolling eNCAPsulation Protocol". - -This is currently only used inside the isdn subsystem. But it might -also be useful to other kinds of network devices. Thus, if you want -to suggest changes that improve usability or performance of the -interface, please let me know. I'm willing to include them in future -releases (even if I needed to adapt the current isdn code to the -changed interface). - - -Why is this useful? -=================== - -The encapsulation protocol used on top of WAN connections or permanent -point-to-point links are frequently chosen upon bilateral agreement. -Thus, a device driver for a certain type of hardware must support -several different encapsulation protocols at once. - -The isdn device driver did already support several different -encapsulation protocols. The encapsulation protocol is configured by a -user space utility (isdnctrl). The isdn network interface code then -uses several case statements which select appropriate actions -depending on the currently configured encapsulation protocol. - -In contrast, LAN network interfaces always used a single encapsulation -protocol which is unique to the hardware type of the interface. The LAN -encapsulation is usually done by just sticking a header on the data. Thus, -traditional linux network device drivers used to process the -encapsulation protocol directly (usually by just providing a hard_header() -method in the device structure) using some hardware type specific support -functions. This is simple, direct and efficient. But it doesn't fit all -the requirements for complex WAN encapsulations. - - - The configurability of the encapsulation protocol to be used - makes isdn network interfaces more flexible, but also much more - complex than traditional lan network interfaces. - - -Many Encapsulation protocols used on top of WAN connections will not just -stick a header on the data. They also might need to set up or release -the WAN connection. They also might want to send other data for their -private purpose over the wire, e.g. ppp does a lot of link level -negotiation before the first piece of user data can be transmitted. -Such encapsulation protocols for WAN devices are typically more complex -than encapsulation protocols for lan devices. Thus, network interface -code for typical WAN devices also tends to be more complex. - - -In order to support Linux' x25 PLP implementation on top of -isdn network interfaces I could have introduced yet another branch to -the various case statements inside drivers/isdn/isdn_net.c. -This eventually made isdn_net.c even more complex. In addition, it made -isdn_net.c harder to maintain. Thus, by identifying an abstract -interface between the network interface code and the encapsulation -protocol, complexity could be reduced and maintainability could be -increased. - - -Likewise, a similar encapsulation protocol will frequently be needed by -several different interfaces of even different hardware type, e.g. the -synchronous ppp implementation used by the isdn driver and the -asynchronous ppp implementation used by the ppp driver have a lot of -similar code in them. By cleanly separating the encapsulation protocol -from the hardware specific interface stuff such code could be shared -better in future. - - -When operating over dial-up-connections (e.g. telephone lines via modem, -non-permanent virtual circuits of wide area networks, ISDN) many -encapsulation protocols will need to control the connection. Therefore, -some basic connection control primitives are supported. The type and -semantics of the connection (i.e the ISO layer where connection service -is provided) is outside our scope and might be different depending on -the encapsulation protocol used, e.g. for a ppp module using our service -on top of a modem connection a connect_request will result in dialing -a (somewhere else configured) remote phone number. For an X25-interface -module (LAPB semantics, as defined in Documentation/networking/x25-iface.txt) -a connect_request will ask for establishing a reliable lapb -datalink connection. - - -The encapsulation protocol currently provides the following -service primitives to the network device. - -- create a new encapsulation protocol instance -- delete encapsulation protocol instance and free all its resources -- initialize (open) the encapsulation protocol instance for use. -- deactivate (close) an encapsulation protocol instance. -- process (xmit) data handed down by upper protocol layer -- receive data from lower (hardware) layer -- process connect indication from lower (hardware) layer -- process disconnect indication from lower (hardware) layer - - -The network interface driver accesses those primitives via callbacks -provided by the encapsulation protocol instance within a -struct concap_proto_ops. - -struct concap_proto_ops{ - - /* create a new encapsulation protocol instance of same type */ - struct concap_proto * (*proto_new) (void); - - /* delete encapsulation protocol instance and free all its resources. - cprot may no longer be referenced after calling this */ - void (*proto_del)(struct concap_proto *cprot); - - /* initialize the protocol's data. To be called at interface startup - or when the device driver resets the interface. All services of the - encapsulation protocol may be used after this*/ - int (*restart)(struct concap_proto *cprot, - struct net_device *ndev, - struct concap_device_ops *dops); - - /* deactivate an encapsulation protocol instance. The encapsulation - protocol may not call any *dops methods after this. */ - int (*close)(struct concap_proto *cprot); - - /* process a frame handed down to us by upper layer */ - int (*encap_and_xmit)(struct concap_proto *cprot, struct sk_buff *skb); - - /* to be called for each data entity received from lower layer*/ - int (*data_ind)(struct concap_proto *cprot, struct sk_buff *skb); - - /* to be called when a connection was set up/down. - Protocols that don't process these primitives might fill in - dummy methods here */ - int (*connect_ind)(struct concap_proto *cprot); - int (*disconn_ind)(struct concap_proto *cprot); -}; - - -The data structures are defined in the header file include/linux/concap.h. - - -A Network interface using encapsulation protocols must also provide -some service primitives to the encapsulation protocol: - -- request data being submitted by lower layer (device hardware) -- request a connection being set up by lower layer -- request a connection being released by lower layer - -The encapsulation protocol accesses those primitives via callbacks -provided by the network interface within a struct concap_device_ops. - -struct concap_device_ops{ - - /* to request data be submitted by device */ - int (*data_req)(struct concap_proto *, struct sk_buff *); - - /* Control methods must be set to NULL by devices which do not - support connection control. */ - /* to request a connection be set up */ - int (*connect_req)(struct concap_proto *); - - /* to request a connection be released */ - int (*disconn_req)(struct concap_proto *); -}; - -The network interface does not explicitly provide a receive service -because the encapsulation protocol directly calls netif_rx(). - - - - -An encapsulation protocol itself is actually the -struct concap_proto{ - struct net_device *net_dev; /* net device using our service */ - struct concap_device_ops *dops; /* callbacks provided by device */ - struct concap_proto_ops *pops; /* callbacks provided by us */ - int flags; - void *proto_data; /* protocol specific private data, to - be accessed via *pops methods only*/ - /* - : - whatever - : - */ -}; - -Most of this is filled in when the device requests the protocol to -be reset (opend). The network interface must provide the net_dev and -dops pointers. Other concap_proto members should be considered private -data that are only accessed by the pops callback functions. Likewise, -a concap proto should access the network device's private data -only by means of the callbacks referred to by the dops pointer. - - -A possible extended device structure which uses the connection controlling -encapsulation services could look like this: - -struct concap_device{ - struct net_device net_dev; - struct my_priv /* device->local stuff */ - /* the my_priv struct might contain a - struct concap_device_ops *dops; - to provide the device specific callbacks - */ - struct concap_proto *cprot; /* callbacks provided by protocol */ -}; - - - -Misc Thoughts -============= - -The concept of the concap proto might help to reuse protocol code and -reduce the complexity of certain network interface implementations. -The trade off is that it introduces yet another procedure call layer -when processing the protocol. This has of course some impact on -performance. However, typically the concap interface will be used by -devices attached to slow lines (like telephone, isdn, leased synchronous -lines). For such slow lines, the overhead is probably negligible. -This might no longer hold for certain high speed WAN links (like -ATM). - - -If general linux network interfaces explicitly supported concap -protocols (e.g. by a member struct concap_proto* in struct net_device) -then the interface of the service function could be changed -by passing a pointer of type (struct net_device*) instead of -type (struct concap_proto*). Doing so would make many of the service -functions compatible to network device support functions. - -e.g. instead of the concap protocol's service function - - int (*encap_and_xmit)(struct concap_proto *cprot, struct sk_buff *skb); - -we could have - - int (*encap_and_xmit)(struct net_device *ndev, struct sk_buff *skb); - -As this is compatible to the dev->hard_start_xmit() method, the device -driver could directly register the concap protocol's encap_and_xmit() -function as its hard_start_xmit() method. This would eliminate one -procedure call layer. - - -The device's data request function could also be defined as - - int (*data_req)(struct net_device *ndev, struct sk_buff *skb); - -This might even allow for some protocol stacking. And the network -interface might even register the same data_req() function directly -as its hard_start_xmit() method when a zero layer encapsulation -protocol is configured. Thus, eliminating the performance penalty -of the concap interface when a trivial concap protocol is used. -Nevertheless, the device remains able to support encapsulation -protocol configuration. - diff --git a/Documentation/isdn/README.diversion b/Documentation/isdn/README.diversion deleted file mode 100644 index bddcd5fb86ff..000000000000 --- a/Documentation/isdn/README.diversion +++ /dev/null @@ -1,127 +0,0 @@ -The isdn diversion services are a supporting module working together with -the isdn4linux and the HiSax module for passive cards. -Active cards, TAs and cards using a own or other driver than the HiSax -module need to be adapted to the HL<->LL interface described in a separate -document. The diversion services may be used with all cards supported by -the HiSax driver. -The diversion kernel interface and controlling tool divertctrl were written -by Werner Cornelius (werner@isdn4linux.de or werner@titro.de) under the -GNU General Public License. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - -Table of contents -================= - -1. Features of the i4l diversion services - (Or what can the i4l diversion services do for me) - -2. Required hard- and software - -3. Compiling, installing and loading/unloading the module - Tracing calling and diversion information - -4. Tracing calling and diversion information - -5. Format of the divert device ASCII output - - -1. Features of the i4l diversion services - (Or what can the i4l diversion services do for me) - - The i4l diversion services offers call forwarding and logging normally - only supported by isdn phones. Incoming calls may be diverted - unconditionally (CFU), when not reachable (CFNR) or on busy condition - (CFB). - The diversions may be invoked statically in the providers exchange - as normally done by isdn phones. In this case all incoming calls - with a special (or all) service identifiers are forwarded if the - forwarding reason is met. Activated static services may also be - interrogated (queried). - The i4l diversion services additionally offers a dynamic version of - call forwarding which is not preprogrammed inside the providers exchange - but dynamically activated by i4l. - In this case all incoming calls are checked by rules that may be - compared to the mechanism of ipfwadm or ipchains. If a given rule matches - the checking process is finished and the rule matching will be applied - to the call. - The rules include primary and secondary service identifiers, called - number and subaddress, callers number and subaddress and whether the rule - matches to all filtered calls or only those when all B-channel resources - are exhausted. - Actions that may be invoked by a rule are ignore, proceed, reject, - direct divert or delayed divert of a call. - All incoming calls matching a rule except the ignore rule a reported and - logged as ASCII via the proc filesystem (/proc/net/isdn/divert). If proceed - is selected the call will be held in a proceeding state (without ringing) - for a certain amount of time to let an external program or client decide - how to handle the call. - - -2. Required hard- and software - - For using the i4l diversion services the isdn line must be of a EURO/DSS1 - type. Additionally the i4l services only work together with the HiSax - driver for passive isdn cards. All HiSax supported cards may be used for - the diversion purposes. - The static diversion services require the provider having static services - CFU, CFNR, CFB activated on an MSN-line. The static services may not be - used on a point-to-point connection. Further the static services are only - available in some countries (for example germany). Countries requiring the - keypad protocol for activating static diversions (like the netherlands) are - not supported but may use the tty devices for this purpose. - The dynamic diversion services may be used in all countries if the provider - enables the feature CF (call forwarding). This should work on both MSN- and - point-to-point lines. - To add and delete rules the additional divertctrl program is needed. This - program is part of the isdn4kutils package. - -3. Compiling, installing and loading/unloading the module - Tracing calling and diversion information - - - To compile the i4l code with diversion support you need to say yes to the - DSS1 diversion services when selecting the i4l options in the kernel - config (menuconfig or config). - After having properly activated a make modules and make modules_install all - required modules will be correctly installed in the needed modules dirs. - As the diversion services are currently not included in the scripts of most - standard distributions you will have to add a "insmod dss1_divert" after - having loaded the global isdn module. - The module can be loaded without any command line parameters. - If the module is actually loaded and active may be checked with a - "cat /proc/modules" or "ls /proc/net/isdn/divert". The divert file is - dynamically created by the diversion module and removed when the module is - unloaded. - - -4. Tracing calling and diversion information - - You also may put a "cat /proc/net/isdn/divert" in the background with the - output redirected to a file. Then all actions of the module are logged. - The divert file in the proc system may be opened more than once, so in - conjunction with inetd and a small remote client on other machines inside - your network incoming calls and reactions by the module may be shown on - every listening machine. - If a call is reported as proceeding an external program or client may - specify during a certain amount of time (normally 4 to 10 seconds) what - to do with that call. - To unload the module all open files to the device in the proc system must - be closed. Otherwise the module (and isdn.o) may not be unloaded. - -5. Format of the divert device ASCII output - - To be done later - diff --git a/Documentation/isdn/README.fax b/Documentation/isdn/README.fax deleted file mode 100644 index 5314958a8a6e..000000000000 --- a/Documentation/isdn/README.fax +++ /dev/null @@ -1,45 +0,0 @@ - -Fax with isdn4linux -=================== - -When enabled during kernel configuration, the tty emulator -of the ISDN subsystem is capable of the Fax Class 2 commands. - -This only makes sense under the following conditions : - -- You need the commands as dummy, because you are using - hylafax (with patch) for AVM capi. -- You want to use the fax capabilities of your isdn-card. - (supported cards are listed below) - - -NOTE: This implementation does *not* support fax with passive - ISDN-cards (known as softfax). The low-level driver of - the ISDN-card and/or the card itself must support this. - - -Supported ISDN-Cards --------------------- - -Eicon DIVA Server BRI/PCI - - full support with both B-channels. - -Eicon DIVA Server 4BRI/PCI - - full support with all B-channels. - -Eicon DIVA Server PRI/PCI - - full support on amount of B-channels - depending on DSPs on board. - - - -The command set is known as Class 2 (not Class 2.0) and -can be activated by AT+FCLASS=2 - - -The interface between the link-level-module and the hardware-level driver -is described in the files INTERFACE.fax and INTERFACE. - -Armin -mac@melware.de - diff --git a/Documentation/isdn/README.hfc-pci b/Documentation/isdn/README.hfc-pci deleted file mode 100644 index e8a4ef0226e8..000000000000 --- a/Documentation/isdn/README.hfc-pci +++ /dev/null @@ -1,41 +0,0 @@ -The driver for the HFC-PCI and HFC-PCI-A chips from CCD may be used -for many OEM cards using this chips. -Additionally the driver has a special feature which makes it possible -to read the echo-channel of the isdn bus. So all frames in both directions -may be logged. -When the echo logging feature is used the number of available B-channels -for a HFC-PCI card is reduced to 1. Of course this is only relevant to -the card, not to the isdn line. -To activate the echo mode the following ioctls must be entered: - -hisaxctrl 10 1 - -This reduces the available channels to 1. There must not be open connections -through this card when entering the command. -And then: - -hisaxctrl 12 1 - -This enables the echo mode. If Hex logging is activated the isdnctrlx -devices show a output with a line beginning of HEX: for the providers -exchange and ECHO: for isdn devices sending to the provider. - -If more than one HFC-PCI cards are installed, a specific card may be selected -at the hisax module load command line. Supply the load command with the desired -IO-address of the desired card. -Example: -There tree cards installed in your machine at IO-base addresses 0xd000, 0xd400 -and 0xdc00 -If you want to use the card at 0xd400 standalone you should supply the insmod -or depmod with type=35 io=0xd400. -If you want to use all three cards, but the order needs to be at 0xdc00,0xd400, -0xd000 you may give the parameters type=35,35,35 io=0xdc00,0xd400,0xd00 -Then the desired card will be the initialised in the desired order. -If the io parameter is used the io addresses of all used cards should be -supplied else the parameter is assumed 0 and a auto search for a free card is -invoked which may not give the wanted result. - -Comments and reports to werner@isdn4linux.de or werner@isdn-development.de - - - diff --git a/Documentation/isdn/README.syncppp b/Documentation/isdn/README.syncppp deleted file mode 100644 index 27d260095cce..000000000000 --- a/Documentation/isdn/README.syncppp +++ /dev/null @@ -1,58 +0,0 @@ -Some additional information for setting up a syncPPP -connection using network interfaces. ---------------------------------------------------------------- - -You need one thing beside the isdn4linux package: - - a patched pppd .. (I called it ipppd to show the difference) - -Compiling isdn4linux with sync PPP: ------------------------------------ -To compile isdn4linux with the sync PPP part, you have -to answer the appropriate question when doing a "make config" -Don't forget to load the slhc.o -module before the isdn.o module, if VJ-compression support -is not compiled into your kernel. (e.g if you have no PPP or -CSLIP in the kernel) - -Using isdn4linux with sync PPP: -------------------------------- -Sync PPP is just another encapsulation for isdn4linux. The -name to enable sync PPP encapsulation is 'syncppp' .. e.g: - - /sbin/isdnctrl encap ippp0 syncppp - -The name of the interface is here 'ippp0'. You need -one interface with the name 'ippp0' to saturate the -ipppd, which checks the ppp version via this interface. -Currently, all devices must have the name ipppX where -'X' is a decimal value. - -To set up a PPP connection you need the ipppd .. You must start -the ipppd once after installing the modules. The ipppd -communicates with the isdn4linux link-level driver using the -/dev/ippp0 to /dev/ippp15 devices. One ipppd can handle -all devices at once. If you want to use two PPP connections -at the same time, you have to connect the ipppd to two -devices .. and so on. -I've implemented one additional option for the ipppd: - 'useifip' will get (if set to not 0.0.0.0) the IP address - for the negotiation from the attached network-interface. -(also: ipppd will try to negotiate pointopoint IP as remote IP) -You must disable BSD-compression, this implementation can't -handle compressed packets. - -Check the etc/rc.isdn.syncppp in the isdn4kernel-util package -for an example setup script. - -To use the MPPP stuff, you must configure a slave device -with isdn4linux. Now call the ipppd with the '+mp' option. -To increase the number of links, you must use the -'addlink' option of the isdnctrl tool. (rc.isdn.syncppp.MPPP is -an example script) - -enjoy it, - michael - - - diff --git a/Documentation/isdn/README.x25 b/Documentation/isdn/README.x25 deleted file mode 100644 index e561a77c4e22..000000000000 --- a/Documentation/isdn/README.x25 +++ /dev/null @@ -1,184 +0,0 @@ - -X.25 support within isdn4linux -============================== - -This is alpha/beta test code. Use it completely at your own risk. -As new versions appear, the stuff described here might suddenly change -or become invalid without notice. - -Keep in mind: - -You are using several new parts of the 2.2.x kernel series which -have not been tested in a large scale. Therefore, you might encounter -more bugs as usual. - -- If you connect to an X.25 neighbour not operated by yourself, ASK the - other side first. Be prepared that bugs in the protocol implementation - might result in problems. - -- This implementation has never wiped out my whole hard disk yet. But as - this is experimental code, don't blame me if that happened to you. - Backing up important data will never harm. - -- Monitor your isdn connections while using this software. This should - prevent you from undesired phone bills in case of driver problems. - - - - -How to configure the kernel -=========================== - -The ITU-T (former CCITT) X.25 network protocol layer has been implemented -in the Linux source tree since version 2.1.16. The isdn subsystem might be -useful to run X.25 on top of ISDN. If you want to try it, select - - "CCITT X.25 Packet Layer" - -from the networking options as well as - - "ISDN Support" and "X.25 PLP on Top of ISDN" - -from the ISDN subsystem options when you configure your kernel for -compilation. You currently also need to enable -"Prompt for development and/or incomplete code/drivers" from the -"Code maturity level options" menu. For the x25trace utility to work -you also need to enable "Packet socket". - -For local testing it is also recommended to enable the isdnloop driver -from the isdn subsystem's configuration menu. - -For testing, it is recommended that all isdn drivers and the X.25 PLP -protocol are compiled as loadable modules. Like this, you can recover -from certain errors by simply unloading and reloading the modules. - - - -What's it for? How to use it? -============================= - -X.25 on top of isdn might be useful with two different scenarios: - -- You might want to access a public X.25 data network from your Linux box. - You can use i4l if you were physically connected to the X.25 switch - by an ISDN B-channel (leased line as well as dial up connection should - work). - - This corresponds to ITU-T recommendation X.31 Case A (circuit-mode - access to PSPDN [packet switched public data network]). - - NOTE: X.31 also covers a Case B (access to PSPDN via virtual - circuit / packet mode service). The latter mode (which in theory - also allows using the D-channel) is not supported by isdn4linux. - It should however be possible to establish such packet mode connections - with certain active isdn cards provided that the firmware supports X.31 - and the driver exports this functionality to the user. Currently, - the AVM B1 driver is the only driver which does so. (It should be - possible to access D-channel X.31 with active AVM cards using the - CAPI interface of the AVM-B1 driver). - -- Or you might want to operate certain ISDN teleservices on your linux - box. A lot of those teleservices run on top of the ISO-8208 - (DTE-DTE mode) network layer protocol. ISO-8208 is essentially the - same as ITU-T X.25. - - Popular candidates of such teleservices are EUROfile transfer or any - teleservice applying ITU-T recommendation T.90. - -To use the X.25 protocol on top of isdn, just create an isdn network -interface as usual, configure your own and/or peer's ISDN numbers, -and choose x25iface encapsulation by - - isdnctrl encap x25iface. - -Once encap is set like this, the device can be used by the X.25 packet layer. - -All the stuff needed for X.25 is implemented inside the isdn link -level (mainly isdn_net.c and some new source files). Thus, it should -work with every existing HL driver. I was able to successfully open X.25 -connections on top of the isdnloop driver and the hisax driver. -"x25iface"-encapsulation bypasses demand dialing. Dialing will be -initiated when the upper (X.25 packet) layer requests the lapb datalink to -be established. But hangup timeout is still active. Whenever a hangup -occurs, all existing X.25 connections on that link will be cleared -It is recommended to use sufficiently large hangup-timeouts for the -isdn interfaces. - - -In order to set up a conforming protocol stack you also need to -specify the proper l2_prot parameter: - -To operate in ISO-8208 X.25 DTE-DTE mode, use - - isdnctrl l2_prot x75i - -To access an X.25 network switch via isdn (your linux box is the DTE), use - - isdnctrl l2_prot x25dte - -To mimic an X.25 network switch (DCE side of the connection), use - - isdnctrl l2_prot x25dce - -However, x25dte or x25dce is currently not supported by any real HL -level driver. The main difference between x75i and x25dte/dce is that -x25d[tc]e uses fixed lap_b addresses. With x75i, the side which -initiates the isdn connection uses the DTE's lap_b address while the -called side used the DCE's lap_b address. Thus, l2_prot x75i might -probably work if you access a public X.25 network as long as the -corresponding isdn connection is set up by you. At least one test -was successful to connect via isdn4linux to an X.25 switch using this -trick. At the switch side, a terminal adapter X.21 was used to connect -it to the isdn. - - -How to set up a test installation? -================================== - -To test X.25 on top of isdn, you need to get - -- a recent version of the "isdnctrl" program that supports setting the new - X.25 specific parameters. - -- the x25-utils-2.X package from - ftp://ftp.hes.iki.fi/pub/ham/linux/ax25/x25utils-* - (don't confuse the x25-utils with the ax25-utils) - -- an application program that uses linux PF_X25 sockets (some are - contained in the x25-util package). - -Before compiling the user level utilities make sure that the compiler/ -preprocessor will fetch the proper kernel header files of this kernel -source tree. Either make /usr/include/linux a symbolic link pointing to -this kernel's include/linux directory or set the appropriate compiler flags. - -When all drivers and interfaces are loaded and configured you need to -ifconfig the network interfaces up and add X.25-routes to them. Use -the usual ifconfig tool. - -ifconfig up - -But a special x25route tool (distributed with the x25-util package) -is needed to set up X.25 routes. I.e. - -x25route add 01 - -will cause all x.25 connections to the destination X.25-address -"01" to be routed to your created isdn network interface. - -There are currently no real X.25 applications available. However, for -tests, the x25-utils package contains a modified version of telnet -and telnetd that uses X.25 sockets instead of tcp/ip sockets. You can -use those for your first tests. Furthermore, you might check -ftp://ftp.hamburg.pop.de/pub/LOCAL/linux/i4l-eft/ which contains some -alpha-test implementation ("eftp4linux") of the EUROfile transfer -protocol. - -The scripts distributed with the eftp4linux test releases might also -provide useful examples for setting up X.25 on top of isdn. - -The x25-utility package also contains an x25trace tool that can be -used to monitor X.25 packets received by the network interfaces. -The /proc/net/x25* files also contain useful information. - -- Henner diff --git a/Documentation/isdn/syncPPP.FAQ b/Documentation/isdn/syncPPP.FAQ deleted file mode 100644 index 3257a4bc0786..000000000000 --- a/Documentation/isdn/syncPPP.FAQ +++ /dev/null @@ -1,224 +0,0 @@ -simple isdn4linux PPP FAQ .. to be continued .. not 'debugged' -------------------------------------------------------------------- - -Q01: what's pppd, ipppd, syncPPP, asyncPPP ?? -Q02: error message "this system lacks PPP support" -Q03: strange information using 'ifconfig' -Q04: MPPP?? What's that and how can I use it ... -Q05: I tried MPPP but it doesn't work -Q06: can I use asynchronous PPP encapsulation with network devices -Q07: A SunISDN machine can't connect to my i4l system -Q08: I wanna talk to several machines, which need different configs -Q09: Starting the ipppd, I get only error messages from i4l -Q10: I wanna use dynamic IP address assignment -Q11: I can't connect. How can I check where the problem is. -Q12: How can I reduce login delay? - -------------------------------------------------------------------- - -Q01: pppd, ipppd, syncPPP, asyncPPP .. what is that ? - what should I use? -A: The pppd is for asynchronous PPP .. asynchronous means - here, the framing is character based. (e.g when - using ttyI* or tty* devices) - - The ipppd handles PPP packets coming in HDLC - frames (bit based protocol) ... The PPP driver - in isdn4linux pushes all IP packets direct - to the network layer and all PPP protocol - frames to the /dev/ippp* device. - So, the ipppd is a simple external network - protocol handler. - - If you login into a remote machine using the - /dev/ttyI* devices and then enable PPP on the - remote terminal server -> use the 'old' pppd - - If your remote side immediately starts to send - frames ... you probably connect to a - syncPPP machine .. use the network device part - of isdn4linux with the 'syncppp' encapsulation - and make sure, that the ipppd is running and - connected to at least one /dev/ippp*. Check the - isdn4linux manual on how to configure a network device. - --- - -Q02: when I start the ipppd .. I only get the - error message "this system lacks PPP support" -A: check that at least the device 'ippp0' exists. - (you can check this e.g with the program 'ifconfig') - The ipppd NEEDS this device under THIS name .. - If this device doesn't exists, use: - isdnctrl addif ippp0 - isdnctrl encap ippp0 syncppp - ... (see isdn4linux doc for more) ... -A: Maybe you have compiled the ipppd with another - kernel source tree than the kernel you currently - run ... - --- - -Q03: when I list the netdevices with ifconfig I see, that - my ISDN interface has a HWaddr and IRQ=0 and Base - address = 0 -A: The device is a fake ethernet device .. ignore IRQ and baseaddr - You need the HWaddr only for ethernet encapsulation. - --- - -Q04: MPPP?? What's that and how can I use it ... - -A: MPPP or MP or MPP (Warning: MP is also an - acronym for 'Multi Processor') stands for - Multi Point to Point and means bundling - of several channels to one logical stream. - To enable MPPP negotiation you must call the - ipppd with the '+mp' option. - You must also configure a slave device for - every additional channel. (see the i4l manual - for more) - To use channel bundling you must first activate - the 'master' or initial call. Now you can add - the slave channels with the command: - isdnctrl addlink - e.g: - isdnctrl addlink ippp0 - This is different from other encapsulations of - isdn4linux! With syncPPP, there is no automatic - activation of slave devices. - --- - -Q05: I tried MPPP but it doesn't work .. the ipppd - writes in the debug log something like: - .. rcvd [0][proto=0x3d] c0 00 00 00 80 fd 01 01 00 0a ... - .. sent [0][LCP ProtRej id=0x2 00 3d c0 00 00 00 80 fd 01 ... - -A: you forgot to compile MPPP/RFC1717 support into the - ISDN Subsystem. Recompile with this option enabled. - --- - -Q06: can I use asynchronous PPP encapsulation - over the network interface of isdn4linux .. - -A: No .. that's not possible .. Use the standard - PPP package over the /dev/ttyI* devices. You - must not use the ipppd for this. - --- - -Q07: A SunISDN machine tries to connect my i4l system, - which doesn't work. - Checking the debug log I just saw garbage like: -!![ ... fill in the line ... ]!! - -A: The Sun tries to talk asynchronous PPP ... i4l - can't understand this ... try to use the ttyI* - devices with the standard PPP/pppd package - -A: (from Alexanter Strauss: ) -!![ ... fill in mail ]!! - --- - -Q08: I wanna talk to remote machines, which need - a different configuration. The only way - I found to do this is to kill the ipppd and - start a new one with another config to connect - to the second machine. - -A: you must bind a network interface explicitly to - an ippp device, where you can connect a (for this - interface) individually configured ipppd. - --- - -Q09: When I start the ipppd I only get error messages - from the i4l driver .. - -A: When starting, the ipppd calls functions which may - trigger a network packet. (e.g gethostbyname()). - Without the ipppd (at this moment, it is not - fully started) we can't handle this network request. - Try to configure hostnames necessary for the ipppd - in your local /etc/hosts file or in a way, that - your system can resolve it without using an - isdn/ippp network-interface. - --- - -Q10: I wanna use dynamic IP address assignment ... How - must I configure the network device. - -A: At least you must have a route which forwards - a packet to the ippp network-interface to trigger - the dial-on-demand. - A default route to the ippp-interface will work. - Now you must choose a dummy IP address for your - interface. - If for some reason you can't set the default - route to the ippp interface, you may take any - address of the subnet from which you expect your - dynamic IP number and set a 'network route' for - this subnet to the ippp interface. - To allow overriding of the dummy address you - must call the ipppd with the 'ipcp-accept-local' option. - -A: You must know, how the ipppd gets the addresses it wanna - configure. If you don't give any option, the ipppd - tries to negotiate the local host address! - With the option 'noipdefault' it requests an address - from the remote machine. With 'useifip' it gets the - addresses from the net interface. Or you set the address - on the option line with the option. - Note: the IP address of the remote machine must be configured - locally or the remote machine must send it in an IPCP request. - If your side doesn't know the IP address after negotiation, it - closes the connection! - You must allow overriding of address with the 'ipcp-accept-*' - options, if you have set your own or the remote address - explicitly. - -A: Maybe you try these options .. e.g: - - /sbin/ipppd :$REMOTE noipdefault /dev/ippp0 - - where REMOTE must be the address of the remote machine (the - machine, which gives you your address) - --- - -Q11: I can't connect. How can I check where the problem is. - -A: A good help log is the debug output from the ipppd... - Check whether you can find there: - - only a few LCP-conf-req SENT messages (less then 10) - and then a Term-REQ: - -> check whether your ISDN card is well configured - it seems, that your machine doesn't dial - (IRQ,IO,Proto, etc problems) - Configure your ISDN card to print debug messages and - check the /dev/isdnctrl output next time. There - you can see, whether there is activity on the card/line. - - there are at least a few RECV messages in the log: - -> fine: your card is dialing and your remote machine - tries to talk with you. Maybe only a missing - authentication. Check your ipppd configuration again. - - the ipppd exits for some reason: - -> not good ... check /var/adm/syslog and /var/adm/daemon. - Could be a bug in the ipppd. - --- - -Q12: How can I reduce login delay? - -A: Log a login session ('debug' log) and check which options - your remote side rejects. Next time configure your ipppd - to not negotiate these options. Another 'side effect' is, that - this increases redundancy. (e.g your remote side is buggy and - rejects options in a wrong way). - - - diff --git a/Documentation/process/changes.rst b/Documentation/process/changes.rst index 18735dc460a0..111636ad1bad 100644 --- a/Documentation/process/changes.rst +++ b/Documentation/process/changes.rst @@ -23,8 +23,8 @@ running, the suggested command should tell you. Again, keep in mind that this list assumes you are already functionally running a Linux kernel. Also, not all tools are necessary on all -systems; obviously, if you don't have any ISDN hardware, for example, -you probably needn't concern yourself with isdn4k-utils. +systems; obviously, if you don't have any PC Card hardware, for example, +you probably needn't concern yourself with pcmciautils. ====================== =============== ======================================== Program Minimal version Command to check the version @@ -45,7 +45,6 @@ btrfs-progs 0.18 btrfsck pcmciautils 004 pccardctl -V quota-tools 3.09 quota -V PPP 2.4.0 pppd --version -isdn4k-utils 3.1pre1 isdnctrl 2>&1|grep version nfs-utils 1.0.5 showmount --version procps 3.2.0 ps --version oprofile 0.9 oprofiled --version @@ -279,12 +278,6 @@ which can be made by:: as root. -Isdn4k-utils ------------- - -Due to changes in the length of the phone number field, isdn4k-utils -needs to be recompiled or (preferably) upgraded. - NFS-utils --------- @@ -448,11 +441,6 @@ PPP - -Isdn4k-utils ------------- - -- - NFS-utils --------- diff --git a/MAINTAINERS b/MAINTAINERS index 0c55b0fedbe2..3a761e680296 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8371,9 +8371,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/isdn-2.6.git S: Maintained F: Documentation/isdn/ F: drivers/isdn/ -F: include/linux/isdn.h F: include/linux/isdn/ -F: include/uapi/linux/isdn.h F: include/uapi/linux/isdn/ IT87 HARDWARE MONITORING DRIVER diff --git a/drivers/isdn/Kconfig b/drivers/isdn/Kconfig index 1ca4d70d198a..6e3bf833c67e 100644 --- a/drivers/isdn/Kconfig +++ b/drivers/isdn/Kconfig @@ -21,27 +21,6 @@ menuconfig ISDN if ISDN -menuconfig ISDN_I4L - tristate "Old ISDN4Linux (deprecated)" - depends on TTY - ---help--- - This driver allows you to use an ISDN adapter for networking - connections and as dialin/out device. The isdn-tty's have a built - in AT-compatible modem emulator. Network devices support autodial, - channel-bundling, callback and caller-authentication without having - a daemon running. A reduced T.70 protocol is supported with tty's - suitable for German BTX. On D-Channel, the protocols EDSS1 - (Euro-ISDN) and 1TR6 (German style) are supported. See - for more information. - - ISDN support in the linux kernel is moving towards a new API, - called CAPI (Common ISDN Application Programming Interface). - Therefore the old ISDN4Linux layer will eventually become obsolete. - It is still available, though, for use with adapters that are not - supported by the new CAPI subsystem yet. - -source "drivers/isdn/i4l/Kconfig" - menuconfig ISDN_CAPI tristate "CAPI 2.0 subsystem" help @@ -71,9 +50,4 @@ source "drivers/isdn/hysdn/Kconfig" source "drivers/isdn/mISDN/Kconfig" -config ISDN_HDLC - tristate - select CRC_CCITT - select BITREVERSE - endif # ISDN diff --git a/drivers/isdn/Makefile b/drivers/isdn/Makefile index 7487f0bbe855..379b4a03c321 100644 --- a/drivers/isdn/Makefile +++ b/drivers/isdn/Makefile @@ -7,7 +7,5 @@ obj-$(CONFIG_ISDN_I4L) += i4l/ obj-$(CONFIG_ISDN_CAPI) += capi/ obj-$(CONFIG_MISDN) += mISDN/ obj-$(CONFIG_ISDN) += hardware/ -obj-$(CONFIG_ISDN_DIVERSION) += divert/ -obj-$(CONFIG_ISDN_DRV_LOOP) += isdnloop/ obj-$(CONFIG_HYSDN) += hysdn/ obj-$(CONFIG_ISDN_DRV_GIGASET) += gigaset/ diff --git a/drivers/isdn/capi/Kconfig b/drivers/isdn/capi/Kconfig index abaadce376c5..089dbee18f36 100644 --- a/drivers/isdn/capi/Kconfig +++ b/drivers/isdn/capi/Kconfig @@ -27,15 +27,6 @@ config ISDN_CAPI_MIDDLEWARE device. If you want to use pppd with pppdcapiplugin to dial up to your ISP, say Y here. -config ISDN_CAPI_CAPIDRV - tristate "CAPI2.0 capidrv interface support" - depends on ISDN_I4L - help - This option provides the glue code to hook up CAPI driven cards to - the legacy isdn4linux link layer. If you have a card which is - supported by a CAPI driver, but still want to use old features like - ippp interfaces or ttyI emulation, say Y/M here. - config ISDN_CAPI_CAPIDRV_VERBOSE bool "Verbose reason code reporting" depends on ISDN_CAPI_CAPIDRV diff --git a/drivers/isdn/capi/capidrv.c b/drivers/isdn/capi/capidrv.c deleted file mode 100644 index e8949f3dcae1..000000000000 --- a/drivers/isdn/capi/capidrv.c +++ /dev/null @@ -1,2525 +0,0 @@ -/* $Id: capidrv.c,v 1.1.2.2 2004/01/12 23:17:24 keil Exp $ - * - * ISDN4Linux Driver, using capi20 interface (kernelcapi) - * - * Copyright 1997 by Carsten Paeth - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include "capidrv.h" - -static int debugmode = 0; - -MODULE_DESCRIPTION("CAPI4Linux: Interface to ISDN4Linux"); -MODULE_AUTHOR("Carsten Paeth"); -MODULE_LICENSE("GPL"); -module_param(debugmode, uint, S_IRUGO | S_IWUSR); - -/* -------- type definitions ----------------------------------------- */ - - -struct capidrv_contr { - - struct capidrv_contr *next; - struct module *owner; - u32 contrnr; - char name[20]; - - /* - * for isdn4linux - */ - isdn_if interface; - int myid; - - /* - * LISTEN state - */ - int state; - u32 cipmask; - u32 cipmask2; - struct timer_list listentimer; - - /* - * ID of capi message sent - */ - u16 msgid; - - /* - * B-Channels - */ - int nbchan; - struct capidrv_bchan { - struct capidrv_contr *contr; - u8 msn[ISDN_MSNLEN]; - int l2; - int l3; - u8 num[ISDN_MSNLEN]; - u8 mynum[ISDN_MSNLEN]; - int si1; - int si2; - int incoming; - int disconnecting; - struct capidrv_plci { - struct capidrv_plci *next; - u32 plci; - u32 ncci; /* ncci for CONNECT_ACTIVE_IND */ - u16 msgid; /* to identfy CONNECT_CONF */ - int chan; - int state; - int leasedline; - struct capidrv_ncci { - struct capidrv_ncci *next; - struct capidrv_plci *plcip; - u32 ncci; - u16 msgid; /* to identfy CONNECT_B3_CONF */ - int chan; - int state; - int oldstate; - /* */ - u16 datahandle; - struct ncci_datahandle_queue { - struct ncci_datahandle_queue *next; - u16 datahandle; - int len; - } *ackqueue; - } *ncci_list; - } *plcip; - struct capidrv_ncci *nccip; - } *bchans; - - struct capidrv_plci *plci_list; - - /* for q931 data */ - u8 q931_buf[4096]; - u8 *q931_read; - u8 *q931_write; - u8 *q931_end; -}; - - -struct capidrv_data { - struct capi20_appl ap; - int ncontr; - struct capidrv_contr *contr_list; -}; - -typedef struct capidrv_plci capidrv_plci; -typedef struct capidrv_ncci capidrv_ncci; -typedef struct capidrv_contr capidrv_contr; -typedef struct capidrv_data capidrv_data; -typedef struct capidrv_bchan capidrv_bchan; - -/* -------- data definitions ----------------------------------------- */ - -static capidrv_data global; -static DEFINE_SPINLOCK(global_lock); - -static void handle_dtrace_data(capidrv_contr *card, - int send, int level2, u8 *data, u16 len); - -/* -------- convert functions ---------------------------------------- */ - -static inline u32 b1prot(int l2, int l3) -{ - switch (l2) { - case ISDN_PROTO_L2_X75I: - case ISDN_PROTO_L2_X75UI: - case ISDN_PROTO_L2_X75BUI: - return 0; - case ISDN_PROTO_L2_HDLC: - default: - return 0; - case ISDN_PROTO_L2_TRANS: - return 1; - case ISDN_PROTO_L2_V11096: - case ISDN_PROTO_L2_V11019: - case ISDN_PROTO_L2_V11038: - return 2; - case ISDN_PROTO_L2_FAX: - return 4; - case ISDN_PROTO_L2_MODEM: - return 8; - } -} - -static inline u32 b2prot(int l2, int l3) -{ - switch (l2) { - case ISDN_PROTO_L2_X75I: - case ISDN_PROTO_L2_X75UI: - case ISDN_PROTO_L2_X75BUI: - default: - return 0; - case ISDN_PROTO_L2_HDLC: - case ISDN_PROTO_L2_TRANS: - case ISDN_PROTO_L2_V11096: - case ISDN_PROTO_L2_V11019: - case ISDN_PROTO_L2_V11038: - case ISDN_PROTO_L2_MODEM: - return 1; - case ISDN_PROTO_L2_FAX: - return 4; - } -} - -static inline u32 b3prot(int l2, int l3) -{ - switch (l2) { - case ISDN_PROTO_L2_X75I: - case ISDN_PROTO_L2_X75UI: - case ISDN_PROTO_L2_X75BUI: - case ISDN_PROTO_L2_HDLC: - case ISDN_PROTO_L2_TRANS: - case ISDN_PROTO_L2_V11096: - case ISDN_PROTO_L2_V11019: - case ISDN_PROTO_L2_V11038: - case ISDN_PROTO_L2_MODEM: - default: - return 0; - case ISDN_PROTO_L2_FAX: - return 4; - } -} - -static _cstruct b1config_async_v110(u16 rate) -{ - /* CAPI-Spec "B1 Configuration" */ - static unsigned char buf[9]; - buf[0] = 8; /* len */ - /* maximum bitrate */ - buf[1] = rate & 0xff; buf[2] = (rate >> 8) & 0xff; - buf[3] = 8; buf[4] = 0; /* 8 bits per character */ - buf[5] = 0; buf[6] = 0; /* parity none */ - buf[7] = 0; buf[8] = 0; /* 1 stop bit */ - return buf; -} - -static _cstruct b1config(int l2, int l3) -{ - switch (l2) { - case ISDN_PROTO_L2_X75I: - case ISDN_PROTO_L2_X75UI: - case ISDN_PROTO_L2_X75BUI: - case ISDN_PROTO_L2_HDLC: - case ISDN_PROTO_L2_TRANS: - default: - return NULL; - case ISDN_PROTO_L2_V11096: - return b1config_async_v110(9600); - case ISDN_PROTO_L2_V11019: - return b1config_async_v110(19200); - case ISDN_PROTO_L2_V11038: - return b1config_async_v110(38400); - } -} - -static inline u16 si2cip(u8 si1, u8 si2) -{ - static const u8 cip[17][5] = - { - /* 0 1 2 3 4 */ - {0, 0, 0, 0, 0}, /*0 */ - {16, 16, 4, 26, 16}, /*1 */ - {17, 17, 17, 4, 4}, /*2 */ - {2, 2, 2, 2, 2}, /*3 */ - {18, 18, 18, 18, 18}, /*4 */ - {2, 2, 2, 2, 2}, /*5 */ - {0, 0, 0, 0, 0}, /*6 */ - {2, 2, 2, 2, 2}, /*7 */ - {2, 2, 2, 2, 2}, /*8 */ - {21, 21, 21, 21, 21}, /*9 */ - {19, 19, 19, 19, 19}, /*10 */ - {0, 0, 0, 0, 0}, /*11 */ - {0, 0, 0, 0, 0}, /*12 */ - {0, 0, 0, 0, 0}, /*13 */ - {0, 0, 0, 0, 0}, /*14 */ - {22, 22, 22, 22, 22}, /*15 */ - {27, 27, 27, 28, 27} /*16 */ - }; - if (si1 > 16) - si1 = 0; - if (si2 > 4) - si2 = 0; - - return (u16) cip[si1][si2]; -} - -static inline u8 cip2si1(u16 cipval) -{ - static const u8 si[32] = - {7, 1, 7, 7, 1, 1, 7, 7, /*0-7 */ - 7, 1, 0, 0, 0, 0, 0, 0, /*8-15 */ - 1, 2, 4, 10, 9, 9, 15, 7, /*16-23 */ - 7, 7, 1, 16, 16, 0, 0, 0}; /*24-31 */ - - if (cipval > 31) - cipval = 0; /* .... */ - return si[cipval]; -} - -static inline u8 cip2si2(u16 cipval) -{ - static const u8 si[32] = - {0, 0, 0, 0, 2, 3, 0, 0, /*0-7 */ - 0, 3, 0, 0, 0, 0, 0, 0, /*8-15 */ - 1, 2, 0, 0, 9, 0, 0, 0, /*16-23 */ - 0, 0, 3, 2, 3, 0, 0, 0}; /*24-31 */ - - if (cipval > 31) - cipval = 0; /* .... */ - return si[cipval]; -} - - -/* -------- controller management ------------------------------------- */ - -static inline capidrv_contr *findcontrbydriverid(int driverid) -{ - unsigned long flags; - capidrv_contr *p; - - spin_lock_irqsave(&global_lock, flags); - for (p = global.contr_list; p; p = p->next) - if (p->myid == driverid) - break; - spin_unlock_irqrestore(&global_lock, flags); - return p; -} - -static capidrv_contr *findcontrbynumber(u32 contr) -{ - unsigned long flags; - capidrv_contr *p = global.contr_list; - - spin_lock_irqsave(&global_lock, flags); - for (p = global.contr_list; p; p = p->next) - if (p->contrnr == contr) - break; - spin_unlock_irqrestore(&global_lock, flags); - return p; -} - - -/* -------- plci management ------------------------------------------ */ - -static capidrv_plci *new_plci(capidrv_contr *card, int chan) -{ - capidrv_plci *plcip; - - plcip = kzalloc(sizeof(capidrv_plci), GFP_ATOMIC); - - if (plcip == NULL) - return NULL; - - plcip->state = ST_PLCI_NONE; - plcip->plci = 0; - plcip->msgid = 0; - plcip->chan = chan; - plcip->next = card->plci_list; - card->plci_list = plcip; - card->bchans[chan].plcip = plcip; - - return plcip; -} - -static capidrv_plci *find_plci_by_plci(capidrv_contr *card, u32 plci) -{ - capidrv_plci *p; - for (p = card->plci_list; p; p = p->next) - if (p->plci == plci) - return p; - return NULL; -} - -static capidrv_plci *find_plci_by_msgid(capidrv_contr *card, u16 msgid) -{ - capidrv_plci *p; - for (p = card->plci_list; p; p = p->next) - if (p->msgid == msgid) - return p; - return NULL; -} - -static capidrv_plci *find_plci_by_ncci(capidrv_contr *card, u32 ncci) -{ - capidrv_plci *p; - for (p = card->plci_list; p; p = p->next) - if (p->plci == (ncci & 0xffff)) - return p; - return NULL; -} - -static void free_plci(capidrv_contr *card, capidrv_plci *plcip) -{ - capidrv_plci **pp; - - for (pp = &card->plci_list; *pp; pp = &(*pp)->next) { - if (*pp == plcip) { - *pp = (*pp)->next; - card->bchans[plcip->chan].plcip = NULL; - card->bchans[plcip->chan].disconnecting = 0; - card->bchans[plcip->chan].incoming = 0; - kfree(plcip); - return; - } - } - printk(KERN_ERR "capidrv-%d: free_plci %p (0x%x) not found, Huh?\n", - card->contrnr, plcip, plcip->plci); -} - -/* -------- ncci management ------------------------------------------ */ - -static inline capidrv_ncci *new_ncci(capidrv_contr *card, - capidrv_plci *plcip, - u32 ncci) -{ - capidrv_ncci *nccip; - - nccip = kzalloc(sizeof(capidrv_ncci), GFP_ATOMIC); - - if (nccip == NULL) - return NULL; - - nccip->ncci = ncci; - nccip->state = ST_NCCI_NONE; - nccip->plcip = plcip; - nccip->chan = plcip->chan; - nccip->datahandle = 0; - - nccip->next = plcip->ncci_list; - plcip->ncci_list = nccip; - - card->bchans[plcip->chan].nccip = nccip; - - return nccip; -} - -static inline capidrv_ncci *find_ncci(capidrv_contr *card, u32 ncci) -{ - capidrv_plci *plcip; - capidrv_ncci *p; - - if ((plcip = find_plci_by_ncci(card, ncci)) == NULL) - return NULL; - - for (p = plcip->ncci_list; p; p = p->next) - if (p->ncci == ncci) - return p; - return NULL; -} - -static inline capidrv_ncci *find_ncci_by_msgid(capidrv_contr *card, - u32 ncci, u16 msgid) -{ - capidrv_plci *plcip; - capidrv_ncci *p; - - if ((plcip = find_plci_by_ncci(card, ncci)) == NULL) - return NULL; - - for (p = plcip->ncci_list; p; p = p->next) - if (p->msgid == msgid) - return p; - return NULL; -} - -static void free_ncci(capidrv_contr *card, struct capidrv_ncci *nccip) -{ - struct capidrv_ncci **pp; - - for (pp = &(nccip->plcip->ncci_list); *pp; pp = &(*pp)->next) { - if (*pp == nccip) { - *pp = (*pp)->next; - break; - } - } - card->bchans[nccip->chan].nccip = NULL; - kfree(nccip); -} - -static int capidrv_add_ack(struct capidrv_ncci *nccip, - u16 datahandle, int len) -{ - struct ncci_datahandle_queue *n, **pp; - - n = kmalloc(sizeof(struct ncci_datahandle_queue), GFP_ATOMIC); - if (!n) { - printk(KERN_ERR "capidrv: kmalloc ncci_datahandle failed\n"); - return -1; - } - n->next = NULL; - n->datahandle = datahandle; - n->len = len; - for (pp = &nccip->ackqueue; *pp; pp = &(*pp)->next); - *pp = n; - return 0; -} - -static int capidrv_del_ack(struct capidrv_ncci *nccip, u16 datahandle) -{ - struct ncci_datahandle_queue **pp, *p; - int len; - - for (pp = &nccip->ackqueue; *pp; pp = &(*pp)->next) { - if ((*pp)->datahandle == datahandle) { - p = *pp; - len = p->len; - *pp = (*pp)->next; - kfree(p); - return len; - } - } - return -1; -} - -/* -------- convert and send capi message ---------------------------- */ - -static void send_message(capidrv_contr *card, _cmsg *cmsg) -{ - struct sk_buff *skb; - size_t len; - - if (capi_cmsg2message(cmsg, cmsg->buf)) { - printk(KERN_ERR "capidrv::send_message: parser failure\n"); - return; - } - len = CAPIMSG_LEN(cmsg->buf); - skb = alloc_skb(len, GFP_ATOMIC); - if (!skb) { - printk(KERN_ERR "capidrv::send_message: can't allocate mem\n"); - return; - } - skb_put_data(skb, cmsg->buf, len); - if (capi20_put_message(&global.ap, skb) != CAPI_NOERROR) - kfree_skb(skb); -} - -/* -------- state machine -------------------------------------------- */ - -struct listenstatechange { - int actstate; - int nextstate; - int event; -}; - -static struct listenstatechange listentable[] = -{ - {ST_LISTEN_NONE, ST_LISTEN_WAIT_CONF, EV_LISTEN_REQ}, - {ST_LISTEN_ACTIVE, ST_LISTEN_ACTIVE_WAIT_CONF, EV_LISTEN_REQ}, - {ST_LISTEN_WAIT_CONF, ST_LISTEN_NONE, EV_LISTEN_CONF_ERROR}, - {ST_LISTEN_ACTIVE_WAIT_CONF, ST_LISTEN_ACTIVE, EV_LISTEN_CONF_ERROR}, - {ST_LISTEN_WAIT_CONF, ST_LISTEN_NONE, EV_LISTEN_CONF_EMPTY}, - {ST_LISTEN_ACTIVE_WAIT_CONF, ST_LISTEN_NONE, EV_LISTEN_CONF_EMPTY}, - {ST_LISTEN_WAIT_CONF, ST_LISTEN_ACTIVE, EV_LISTEN_CONF_OK}, - {ST_LISTEN_ACTIVE_WAIT_CONF, ST_LISTEN_ACTIVE, EV_LISTEN_CONF_OK}, - {}, -}; - -static void listen_change_state(capidrv_contr *card, int event) -{ - struct listenstatechange *p = listentable; - while (p->event) { - if (card->state == p->actstate && p->event == event) { - if (debugmode) - printk(KERN_DEBUG "capidrv-%d: listen_change_state %d -> %d\n", - card->contrnr, card->state, p->nextstate); - card->state = p->nextstate; - return; - } - p++; - } - printk(KERN_ERR "capidrv-%d: listen_change_state state=%d event=%d ????\n", - card->contrnr, card->state, event); - -} - -/* ------------------------------------------------------------------ */ - -static void p0(capidrv_contr *card, capidrv_plci *plci) -{ - isdn_ctrl cmd; - - card->bchans[plci->chan].contr = NULL; - cmd.command = ISDN_STAT_DHUP; - cmd.driver = card->myid; - cmd.arg = plci->chan; - card->interface.statcallb(&cmd); - free_plci(card, plci); -} - -/* ------------------------------------------------------------------ */ - -struct plcistatechange { - int actstate; - int nextstate; - int event; - void (*changefunc)(capidrv_contr *card, capidrv_plci *plci); -}; - -static struct plcistatechange plcitable[] = -{ - /* P-0 */ - {ST_PLCI_NONE, ST_PLCI_OUTGOING, EV_PLCI_CONNECT_REQ, NULL}, - {ST_PLCI_NONE, ST_PLCI_ALLOCATED, EV_PLCI_FACILITY_IND_UP, NULL}, - {ST_PLCI_NONE, ST_PLCI_INCOMING, EV_PLCI_CONNECT_IND, NULL}, - {ST_PLCI_NONE, ST_PLCI_RESUMEING, EV_PLCI_RESUME_REQ, NULL}, - /* P-0.1 */ - {ST_PLCI_OUTGOING, ST_PLCI_NONE, EV_PLCI_CONNECT_CONF_ERROR, p0}, - {ST_PLCI_OUTGOING, ST_PLCI_ALLOCATED, EV_PLCI_CONNECT_CONF_OK, NULL}, - /* P-1 */ - {ST_PLCI_ALLOCATED, ST_PLCI_ACTIVE, EV_PLCI_CONNECT_ACTIVE_IND, NULL}, - {ST_PLCI_ALLOCATED, ST_PLCI_DISCONNECTING, EV_PLCI_DISCONNECT_REQ, NULL}, - {ST_PLCI_ALLOCATED, ST_PLCI_DISCONNECTING, EV_PLCI_FACILITY_IND_DOWN, NULL}, - {ST_PLCI_ALLOCATED, ST_PLCI_DISCONNECTED, EV_PLCI_DISCONNECT_IND, NULL}, - /* P-ACT */ - {ST_PLCI_ACTIVE, ST_PLCI_DISCONNECTING, EV_PLCI_DISCONNECT_REQ, NULL}, - {ST_PLCI_ACTIVE, ST_PLCI_DISCONNECTING, EV_PLCI_FACILITY_IND_DOWN, NULL}, - {ST_PLCI_ACTIVE, ST_PLCI_DISCONNECTED, EV_PLCI_DISCONNECT_IND, NULL}, - {ST_PLCI_ACTIVE, ST_PLCI_HELD, EV_PLCI_HOLD_IND, NULL}, - {ST_PLCI_ACTIVE, ST_PLCI_DISCONNECTING, EV_PLCI_SUSPEND_IND, NULL}, - /* P-2 */ - {ST_PLCI_INCOMING, ST_PLCI_DISCONNECTING, EV_PLCI_CONNECT_REJECT, NULL}, - {ST_PLCI_INCOMING, ST_PLCI_FACILITY_IND, EV_PLCI_FACILITY_IND_UP, NULL}, - {ST_PLCI_INCOMING, ST_PLCI_ACCEPTING, EV_PLCI_CONNECT_RESP, NULL}, - {ST_PLCI_INCOMING, ST_PLCI_DISCONNECTING, EV_PLCI_DISCONNECT_REQ, NULL}, - {ST_PLCI_INCOMING, ST_PLCI_DISCONNECTING, EV_PLCI_FACILITY_IND_DOWN, NULL}, - {ST_PLCI_INCOMING, ST_PLCI_DISCONNECTED, EV_PLCI_DISCONNECT_IND, NULL}, - {ST_PLCI_INCOMING, ST_PLCI_DISCONNECTING, EV_PLCI_CD_IND, NULL}, - /* P-3 */ - {ST_PLCI_FACILITY_IND, ST_PLCI_DISCONNECTING, EV_PLCI_CONNECT_REJECT, NULL}, - {ST_PLCI_FACILITY_IND, ST_PLCI_ACCEPTING, EV_PLCI_CONNECT_ACTIVE_IND, NULL}, - {ST_PLCI_FACILITY_IND, ST_PLCI_DISCONNECTING, EV_PLCI_DISCONNECT_REQ, NULL}, - {ST_PLCI_FACILITY_IND, ST_PLCI_DISCONNECTING, EV_PLCI_FACILITY_IND_DOWN, NULL}, - {ST_PLCI_FACILITY_IND, ST_PLCI_DISCONNECTED, EV_PLCI_DISCONNECT_IND, NULL}, - /* P-4 */ - {ST_PLCI_ACCEPTING, ST_PLCI_ACTIVE, EV_PLCI_CONNECT_ACTIVE_IND, NULL}, - {ST_PLCI_ACCEPTING, ST_PLCI_DISCONNECTING, EV_PLCI_DISCONNECT_REQ, NULL}, - {ST_PLCI_ACCEPTING, ST_PLCI_DISCONNECTING, EV_PLCI_FACILITY_IND_DOWN, NULL}, - {ST_PLCI_ACCEPTING, ST_PLCI_DISCONNECTED, EV_PLCI_DISCONNECT_IND, NULL}, - /* P-5 */ - {ST_PLCI_DISCONNECTING, ST_PLCI_DISCONNECTED, EV_PLCI_DISCONNECT_IND, NULL}, - /* P-6 */ - {ST_PLCI_DISCONNECTED, ST_PLCI_NONE, EV_PLCI_DISCONNECT_RESP, p0}, - /* P-0.Res */ - {ST_PLCI_RESUMEING, ST_PLCI_NONE, EV_PLCI_RESUME_CONF_ERROR, p0}, - {ST_PLCI_RESUMEING, ST_PLCI_RESUME, EV_PLCI_RESUME_CONF_OK, NULL}, - /* P-RES */ - {ST_PLCI_RESUME, ST_PLCI_ACTIVE, EV_PLCI_RESUME_IND, NULL}, - /* P-HELD */ - {ST_PLCI_HELD, ST_PLCI_ACTIVE, EV_PLCI_RETRIEVE_IND, NULL}, - {}, -}; - -static void plci_change_state(capidrv_contr *card, capidrv_plci *plci, int event) -{ - struct plcistatechange *p = plcitable; - while (p->event) { - if (plci->state == p->actstate && p->event == event) { - if (debugmode) - printk(KERN_DEBUG "capidrv-%d: plci_change_state:0x%x %d -> %d\n", - card->contrnr, plci->plci, plci->state, p->nextstate); - plci->state = p->nextstate; - if (p->changefunc) - p->changefunc(card, plci); - return; - } - p++; - } - printk(KERN_ERR "capidrv-%d: plci_change_state:0x%x state=%d event=%d ????\n", - card->contrnr, plci->plci, plci->state, event); -} - -/* ------------------------------------------------------------------ */ - -static _cmsg cmsg; - -static void n0(capidrv_contr *card, capidrv_ncci *ncci) -{ - isdn_ctrl cmd; - - capi_fill_DISCONNECT_REQ(&cmsg, - global.ap.applid, - card->msgid++, - ncci->plcip->plci, - NULL, /* BChannelinformation */ - NULL, /* Keypadfacility */ - NULL, /* Useruserdata */ /* $$$$ */ - NULL /* Facilitydataarray */ - ); - plci_change_state(card, ncci->plcip, EV_PLCI_DISCONNECT_REQ); - send_message(card, &cmsg); - - cmd.command = ISDN_STAT_BHUP; - cmd.driver = card->myid; - cmd.arg = ncci->chan; - card->interface.statcallb(&cmd); - free_ncci(card, ncci); -} - -/* ------------------------------------------------------------------ */ - -struct nccistatechange { - int actstate; - int nextstate; - int event; - void (*changefunc)(capidrv_contr *card, capidrv_ncci *ncci); -}; - -static struct nccistatechange nccitable[] = -{ - /* N-0 */ - {ST_NCCI_NONE, ST_NCCI_OUTGOING, EV_NCCI_CONNECT_B3_REQ, NULL}, - {ST_NCCI_NONE, ST_NCCI_INCOMING, EV_NCCI_CONNECT_B3_IND, NULL}, - /* N-0.1 */ - {ST_NCCI_OUTGOING, ST_NCCI_ALLOCATED, EV_NCCI_CONNECT_B3_CONF_OK, NULL}, - {ST_NCCI_OUTGOING, ST_NCCI_NONE, EV_NCCI_CONNECT_B3_CONF_ERROR, n0}, - /* N-1 */ - {ST_NCCI_INCOMING, ST_NCCI_DISCONNECTING, EV_NCCI_CONNECT_B3_REJECT, NULL}, - {ST_NCCI_INCOMING, ST_NCCI_ALLOCATED, EV_NCCI_CONNECT_B3_RESP, NULL}, - {ST_NCCI_INCOMING, ST_NCCI_DISCONNECTED, EV_NCCI_DISCONNECT_B3_IND, NULL}, - {ST_NCCI_INCOMING, ST_NCCI_DISCONNECTING, EV_NCCI_DISCONNECT_B3_REQ, NULL}, - /* N-2 */ - {ST_NCCI_ALLOCATED, ST_NCCI_ACTIVE, EV_NCCI_CONNECT_B3_ACTIVE_IND, NULL}, - {ST_NCCI_ALLOCATED, ST_NCCI_DISCONNECTED, EV_NCCI_DISCONNECT_B3_IND, NULL}, - {ST_NCCI_ALLOCATED, ST_NCCI_DISCONNECTING, EV_NCCI_DISCONNECT_B3_REQ, NULL}, - /* N-ACT */ - {ST_NCCI_ACTIVE, ST_NCCI_ACTIVE, EV_NCCI_RESET_B3_IND, NULL}, - {ST_NCCI_ACTIVE, ST_NCCI_RESETING, EV_NCCI_RESET_B3_REQ, NULL}, - {ST_NCCI_ACTIVE, ST_NCCI_DISCONNECTED, EV_NCCI_DISCONNECT_B3_IND, NULL}, - {ST_NCCI_ACTIVE, ST_NCCI_DISCONNECTING, EV_NCCI_DISCONNECT_B3_REQ, NULL}, - /* N-3 */ - {ST_NCCI_RESETING, ST_NCCI_ACTIVE, EV_NCCI_RESET_B3_IND, NULL}, - {ST_NCCI_RESETING, ST_NCCI_DISCONNECTED, EV_NCCI_DISCONNECT_B3_IND, NULL}, - {ST_NCCI_RESETING, ST_NCCI_DISCONNECTING, EV_NCCI_DISCONNECT_B3_REQ, NULL}, - /* N-4 */ - {ST_NCCI_DISCONNECTING, ST_NCCI_DISCONNECTED, EV_NCCI_DISCONNECT_B3_IND, NULL}, - {ST_NCCI_DISCONNECTING, ST_NCCI_PREVIOUS, EV_NCCI_DISCONNECT_B3_CONF_ERROR, NULL}, - /* N-5 */ - {ST_NCCI_DISCONNECTED, ST_NCCI_NONE, EV_NCCI_DISCONNECT_B3_RESP, n0}, - {}, -}; - -static void ncci_change_state(capidrv_contr *card, capidrv_ncci *ncci, int event) -{ - struct nccistatechange *p = nccitable; - while (p->event) { - if (ncci->state == p->actstate && p->event == event) { - if (debugmode) - printk(KERN_DEBUG "capidrv-%d: ncci_change_state:0x%x %d -> %d\n", - card->contrnr, ncci->ncci, ncci->state, p->nextstate); - if (p->nextstate == ST_NCCI_PREVIOUS) { - ncci->state = ncci->oldstate; - ncci->oldstate = p->actstate; - } else { - ncci->oldstate = p->actstate; - ncci->state = p->nextstate; - } - if (p->changefunc) - p->changefunc(card, ncci); - return; - } - p++; - } - printk(KERN_ERR "capidrv-%d: ncci_change_state:0x%x state=%d event=%d ????\n", - card->contrnr, ncci->ncci, ncci->state, event); -} - -/* ------------------------------------------------------------------- */ - -static inline int new_bchan(capidrv_contr *card) -{ - int i; - for (i = 0; i < card->nbchan; i++) { - if (card->bchans[i].plcip == NULL) { - card->bchans[i].disconnecting = 0; - return i; - } - } - return -1; -} - -/* ------------------------------------------------------------------- */ -static char *capi_info2str(u16 reason) -{ -#ifndef CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE - return ".."; -#else - switch (reason) { - -/*-- informative values (corresponding message was processed) -----*/ - case 0x0001: - return "NCPI not supported by current protocol, NCPI ignored"; - case 0x0002: - return "Flags not supported by current protocol, flags ignored"; - case 0x0003: - return "Alert already sent by another application"; - -/*-- error information concerning CAPI_REGISTER -----*/ - case 0x1001: - return "Too many applications"; - case 0x1002: - return "Logical block size too small, must be at least 128 Bytes"; - case 0x1003: - return "Buffer exceeds 64 kByte"; - case 0x1004: - return "Message buffer size too small, must be at least 1024 Bytes"; - case 0x1005: - return "Max. number of logical connections not supported"; - case 0x1006: - return "Reserved"; - case 0x1007: - return "The message could not be accepted because of an internal busy condition"; - case 0x1008: - return "OS resource error (no memory ?)"; - case 0x1009: - return "CAPI not installed"; - case 0x100A: - return "Controller does not support external equipment"; - case 0x100B: - return "Controller does only support external equipment"; - -/*-- error information concerning message exchange functions -----*/ - case 0x1101: - return "Illegal application number"; - case 0x1102: - return "Illegal command or subcommand or message length less than 12 bytes"; - case 0x1103: - return "The message could not be accepted because of a queue full condition !! The error code does not imply that CAPI cannot receive messages directed to another controller, PLCI or NCCI"; - case 0x1104: - return "Queue is empty"; - case 0x1105: - return "Queue overflow, a message was lost !! This indicates a configuration error. The only recovery from this error is to perform a CAPI_RELEASE"; - case 0x1106: - return "Unknown notification parameter"; - case 0x1107: - return "The Message could not be accepted because of an internal busy condition"; - case 0x1108: - return "OS Resource error (no memory ?)"; - case 0x1109: - return "CAPI not installed"; - case 0x110A: - return "Controller does not support external equipment"; - case 0x110B: - return "Controller does only support external equipment"; - -/*-- error information concerning resource / coding problems -----*/ - case 0x2001: - return "Message not supported in current state"; - case 0x2002: - return "Illegal Controller / PLCI / NCCI"; - case 0x2003: - return "Out of PLCI"; - case 0x2004: - return "Out of NCCI"; - case 0x2005: - return "Out of LISTEN"; - case 0x2006: - return "Out of FAX resources (protocol T.30)"; - case 0x2007: - return "Illegal message parameter coding"; - -/*-- error information concerning requested services -----*/ - case 0x3001: - return "B1 protocol not supported"; - case 0x3002: - return "B2 protocol not supported"; - case 0x3003: - return "B3 protocol not supported"; - case 0x3004: - return "B1 protocol parameter not supported"; - case 0x3005: - return "B2 protocol parameter not supported"; - case 0x3006: - return "B3 protocol parameter not supported"; - case 0x3007: - return "B protocol combination not supported"; - case 0x3008: - return "NCPI not supported"; - case 0x3009: - return "CIP Value unknown"; - case 0x300A: - return "Flags not supported (reserved bits)"; - case 0x300B: - return "Facility not supported"; - case 0x300C: - return "Data length not supported by current protocol"; - case 0x300D: - return "Reset procedure not supported by current protocol"; - -/*-- informations about the clearing of a physical connection -----*/ - case 0x3301: - return "Protocol error layer 1 (broken line or B-channel removed by signalling protocol)"; - case 0x3302: - return "Protocol error layer 2"; - case 0x3303: - return "Protocol error layer 3"; - case 0x3304: - return "Another application got that call"; -/*-- T.30 specific reasons -----*/ - case 0x3311: - return "Connecting not successful (remote station is no FAX G3 machine)"; - case 0x3312: - return "Connecting not successful (training error)"; - case 0x3313: - return "Disconnected before transfer (remote station does not support transfer mode, e.g. resolution)"; - case 0x3314: - return "Disconnected during transfer (remote abort)"; - case 0x3315: - return "Disconnected during transfer (remote procedure error, e.g. unsuccessful repetition of T.30 commands)"; - case 0x3316: - return "Disconnected during transfer (local tx data underrun)"; - case 0x3317: - return "Disconnected during transfer (local rx data overflow)"; - case 0x3318: - return "Disconnected during transfer (local abort)"; - case 0x3319: - return "Illegal parameter coding (e.g. SFF coding error)"; - -/*-- disconnect causes from the network according to ETS 300 102-1/Q.931 -----*/ - case 0x3481: return "Unallocated (unassigned) number"; - case 0x3482: return "No route to specified transit network"; - case 0x3483: return "No route to destination"; - case 0x3486: return "Channel unacceptable"; - case 0x3487: - return "Call awarded and being delivered in an established channel"; - case 0x3490: return "Normal call clearing"; - case 0x3491: return "User busy"; - case 0x3492: return "No user responding"; - case 0x3493: return "No answer from user (user alerted)"; - case 0x3495: return "Call rejected"; - case 0x3496: return "Number changed"; - case 0x349A: return "Non-selected user clearing"; - case 0x349B: return "Destination out of order"; - case 0x349C: return "Invalid number format"; - case 0x349D: return "Facility rejected"; - case 0x349E: return "Response to STATUS ENQUIRY"; - case 0x349F: return "Normal, unspecified"; - case 0x34A2: return "No circuit / channel available"; - case 0x34A6: return "Network out of order"; - case 0x34A9: return "Temporary failure"; - case 0x34AA: return "Switching equipment congestion"; - case 0x34AB: return "Access information discarded"; - case 0x34AC: return "Requested circuit / channel not available"; - case 0x34AF: return "Resources unavailable, unspecified"; - case 0x34B1: return "Quality of service unavailable"; - case 0x34B2: return "Requested facility not subscribed"; - case 0x34B9: return "Bearer capability not authorized"; - case 0x34BA: return "Bearer capability not presently available"; - case 0x34BF: return "Service or option not available, unspecified"; - case 0x34C1: return "Bearer capability not implemented"; - case 0x34C2: return "Channel type not implemented"; - case 0x34C5: return "Requested facility not implemented"; - case 0x34C6: return "Only restricted digital information bearer capability is available"; - case 0x34CF: return "Service or option not implemented, unspecified"; - case 0x34D1: return "Invalid call reference value"; - case 0x34D2: return "Identified channel does not exist"; - case 0x34D3: return "A suspended call exists, but this call identity does not"; - case 0x34D4: return "Call identity in use"; - case 0x34D5: return "No call suspended"; - case 0x34D6: return "Call having the requested call identity has been cleared"; - case 0x34D8: return "Incompatible destination"; - case 0x34DB: return "Invalid transit network selection"; - case 0x34DF: return "Invalid message, unspecified"; - case 0x34E0: return "Mandatory information element is missing"; - case 0x34E1: return "Message type non-existent or not implemented"; - case 0x34E2: return "Message not compatible with call state or message type non-existent or not implemented"; - case 0x34E3: return "Information element non-existent or not implemented"; - case 0x34E4: return "Invalid information element contents"; - case 0x34E5: return "Message not compatible with call state"; - case 0x34E6: return "Recovery on timer expiry"; - case 0x34EF: return "Protocol error, unspecified"; - case 0x34FF: return "Interworking, unspecified"; - - default: return "No additional information"; - } -#endif -} - -static void handle_controller(_cmsg *cmsg) -{ - capidrv_contr *card = findcontrbynumber(cmsg->adr.adrController & 0x7f); - - if (!card) { - printk(KERN_ERR "capidrv: %s from unknown controller 0x%x\n", - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->adr.adrController & 0x7f); - return; - } - switch (CAPICMD(cmsg->Command, cmsg->Subcommand)) { - - case CAPI_LISTEN_CONF: /* Controller */ - if (debugmode) - printk(KERN_DEBUG "capidrv-%d: listenconf Info=0x%4x (%s) cipmask=0x%x\n", - card->contrnr, cmsg->Info, capi_info2str(cmsg->Info), card->cipmask); - if (cmsg->Info) { - listen_change_state(card, EV_LISTEN_CONF_ERROR); - } else if (card->cipmask == 0) { - listen_change_state(card, EV_LISTEN_CONF_EMPTY); - } else { - listen_change_state(card, EV_LISTEN_CONF_OK); - } - break; - - case CAPI_MANUFACTURER_IND: /* Controller */ - if (cmsg->ManuID == 0x214D5641 - && cmsg->Class == 0 - && cmsg->Function == 1) { - u8 *data = cmsg->ManuData + 3; - u16 len = cmsg->ManuData[0]; - u16 layer; - int direction; - if (len == 255) { - len = (cmsg->ManuData[1] | (cmsg->ManuData[2] << 8)); - data += 2; - } - len -= 2; - layer = ((*(data - 1)) << 8) | *(data - 2); - if (layer & 0x300) - direction = (layer & 0x200) ? 0 : 1; - else direction = (layer & 0x800) ? 0 : 1; - if (layer & 0x0C00) { - if ((layer & 0xff) == 0x80) { - handle_dtrace_data(card, direction, 1, data, len); - break; - } - } else if ((layer & 0xff) < 0x80) { - handle_dtrace_data(card, direction, 0, data, len); - break; - } - printk(KERN_INFO "capidrv-%d: %s from controller 0x%x layer 0x%x, ignored\n", - card->contrnr, - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->adr.adrController, layer); - break; - } - goto ignored; - case CAPI_MANUFACTURER_CONF: /* Controller */ - if (cmsg->ManuID == 0x214D5641) { - char *s = NULL; - switch (cmsg->Class) { - case 0: break; - case 1: s = "unknown class"; break; - case 2: s = "unknown function"; break; - default: s = "unknown error"; break; - } - if (s) - printk(KERN_INFO "capidrv-%d: %s from controller 0x%x function %d: %s\n", - card->contrnr, - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->adr.adrController, - cmsg->Function, s); - break; - } - goto ignored; - case CAPI_FACILITY_IND: /* Controller/plci/ncci */ - goto ignored; - case CAPI_FACILITY_CONF: /* Controller/plci/ncci */ - goto ignored; - case CAPI_INFO_IND: /* Controller/plci */ - goto ignored; - case CAPI_INFO_CONF: /* Controller/plci */ - goto ignored; - - default: - printk(KERN_ERR "capidrv-%d: got %s from controller 0x%x ???", - card->contrnr, - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->adr.adrController); - } - return; - -ignored: - printk(KERN_INFO "capidrv-%d: %s from controller 0x%x ignored\n", - card->contrnr, - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->adr.adrController); -} - -static void handle_incoming_call(capidrv_contr *card, _cmsg *cmsg) -{ - capidrv_plci *plcip; - capidrv_bchan *bchan; - isdn_ctrl cmd; - int chan; - - if ((chan = new_bchan(card)) == -1) { - printk(KERN_ERR "capidrv-%d: incoming call on not existing bchan ?\n", card->contrnr); - return; - } - bchan = &card->bchans[chan]; - if ((plcip = new_plci(card, chan)) == NULL) { - printk(KERN_ERR "capidrv-%d: incoming call: no memory, sorry.\n", card->contrnr); - return; - } - bchan->incoming = 1; - plcip->plci = cmsg->adr.adrPLCI; - plci_change_state(card, plcip, EV_PLCI_CONNECT_IND); - - cmd.command = ISDN_STAT_ICALL; - cmd.driver = card->myid; - cmd.arg = chan; - memset(&cmd.parm.setup, 0, sizeof(cmd.parm.setup)); - strncpy(cmd.parm.setup.phone, - cmsg->CallingPartyNumber + 3, - cmsg->CallingPartyNumber[0] - 2); - strncpy(cmd.parm.setup.eazmsn, - cmsg->CalledPartyNumber + 2, - cmsg->CalledPartyNumber[0] - 1); - cmd.parm.setup.si1 = cip2si1(cmsg->CIPValue); - cmd.parm.setup.si2 = cip2si2(cmsg->CIPValue); - cmd.parm.setup.plan = cmsg->CallingPartyNumber[1]; - cmd.parm.setup.screen = cmsg->CallingPartyNumber[2]; - - printk(KERN_INFO "capidrv-%d: incoming call %s,%d,%d,%s\n", - card->contrnr, - cmd.parm.setup.phone, - cmd.parm.setup.si1, - cmd.parm.setup.si2, - cmd.parm.setup.eazmsn); - - if (cmd.parm.setup.si1 == 1 && cmd.parm.setup.si2 != 0) { - printk(KERN_INFO "capidrv-%d: patching si2=%d to 0 for VBOX\n", - card->contrnr, - cmd.parm.setup.si2); - cmd.parm.setup.si2 = 0; - } - - switch (card->interface.statcallb(&cmd)) { - case 0: - case 3: - /* No device matching this call. - * and isdn_common.c has send a HANGUP command - * which is ignored in state ST_PLCI_INCOMING, - * so we send RESP to ignore the call - */ - capi_cmsg_answer(cmsg); - cmsg->Reject = 1; /* ignore */ - plci_change_state(card, plcip, EV_PLCI_CONNECT_REJECT); - send_message(card, cmsg); - printk(KERN_INFO "capidrv-%d: incoming call %s,%d,%d,%s ignored\n", - card->contrnr, - cmd.parm.setup.phone, - cmd.parm.setup.si1, - cmd.parm.setup.si2, - cmd.parm.setup.eazmsn); - break; - case 1: - /* At least one device matching this call (RING on ttyI) - * HL-driver may send ALERTING on the D-channel in this - * case. - * really means: RING on ttyI or a net interface - * accepted this call already. - * - * If the call was accepted, state has already changed, - * and CONNECT_RESP already sent. - */ - if (plcip->state == ST_PLCI_INCOMING) { - printk(KERN_INFO "capidrv-%d: incoming call %s,%d,%d,%s tty alerting\n", - card->contrnr, - cmd.parm.setup.phone, - cmd.parm.setup.si1, - cmd.parm.setup.si2, - cmd.parm.setup.eazmsn); - capi_fill_ALERT_REQ(cmsg, - global.ap.applid, - card->msgid++, - plcip->plci, /* adr */ - NULL,/* BChannelinformation */ - NULL,/* Keypadfacility */ - NULL,/* Useruserdata */ - NULL /* Facilitydataarray */ - ); - plcip->msgid = cmsg->Messagenumber; - send_message(card, cmsg); - } else { - printk(KERN_INFO "capidrv-%d: incoming call %s,%d,%d,%s on netdev\n", - card->contrnr, - cmd.parm.setup.phone, - cmd.parm.setup.si1, - cmd.parm.setup.si2, - cmd.parm.setup.eazmsn); - } - break; - - case 2: /* Call will be rejected. */ - capi_cmsg_answer(cmsg); - cmsg->Reject = 2; /* reject call, normal call clearing */ - plci_change_state(card, plcip, EV_PLCI_CONNECT_REJECT); - send_message(card, cmsg); - break; - - default: - /* An error happened. (Invalid parameters for example.) */ - capi_cmsg_answer(cmsg); - cmsg->Reject = 8; /* reject call, - destination out of order */ - plci_change_state(card, plcip, EV_PLCI_CONNECT_REJECT); - send_message(card, cmsg); - break; - } - return; -} - -static void handle_plci(_cmsg *cmsg) -{ - capidrv_contr *card = findcontrbynumber(cmsg->adr.adrController & 0x7f); - capidrv_plci *plcip; - isdn_ctrl cmd; - _cdebbuf *cdb; - - if (!card) { - printk(KERN_ERR "capidrv: %s from unknown controller 0x%x\n", - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->adr.adrController & 0x7f); - return; - } - switch (CAPICMD(cmsg->Command, cmsg->Subcommand)) { - - case CAPI_DISCONNECT_IND: /* plci */ - if (cmsg->Reason) { - printk(KERN_INFO "capidrv-%d: %s reason 0x%x (%s) for plci 0x%x\n", - card->contrnr, - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->Reason, capi_info2str(cmsg->Reason), cmsg->adr.adrPLCI); - } - if (!(plcip = find_plci_by_plci(card, cmsg->adr.adrPLCI))) { - capi_cmsg_answer(cmsg); - send_message(card, cmsg); - goto notfound; - } - card->bchans[plcip->chan].disconnecting = 1; - plci_change_state(card, plcip, EV_PLCI_DISCONNECT_IND); - capi_cmsg_answer(cmsg); - plci_change_state(card, plcip, EV_PLCI_DISCONNECT_RESP); - send_message(card, cmsg); - break; - - case CAPI_DISCONNECT_CONF: /* plci */ - if (cmsg->Info) { - printk(KERN_INFO "capidrv-%d: %s info 0x%x (%s) for plci 0x%x\n", - card->contrnr, - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->Info, capi_info2str(cmsg->Info), - cmsg->adr.adrPLCI); - } - if (!(plcip = find_plci_by_plci(card, cmsg->adr.adrPLCI))) - goto notfound; - - card->bchans[plcip->chan].disconnecting = 1; - break; - - case CAPI_ALERT_CONF: /* plci */ - if (cmsg->Info) { - printk(KERN_INFO "capidrv-%d: %s info 0x%x (%s) for plci 0x%x\n", - card->contrnr, - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->Info, capi_info2str(cmsg->Info), - cmsg->adr.adrPLCI); - } - break; - - case CAPI_CONNECT_IND: /* plci */ - handle_incoming_call(card, cmsg); - break; - - case CAPI_CONNECT_CONF: /* plci */ - if (cmsg->Info) { - printk(KERN_INFO "capidrv-%d: %s info 0x%x (%s) for plci 0x%x\n", - card->contrnr, - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->Info, capi_info2str(cmsg->Info), - cmsg->adr.adrPLCI); - } - if (!(plcip = find_plci_by_msgid(card, cmsg->Messagenumber))) - goto notfound; - - plcip->plci = cmsg->adr.adrPLCI; - if (cmsg->Info) { - plci_change_state(card, plcip, EV_PLCI_CONNECT_CONF_ERROR); - } else { - plci_change_state(card, plcip, EV_PLCI_CONNECT_CONF_OK); - } - break; - - case CAPI_CONNECT_ACTIVE_IND: /* plci */ - - if (!(plcip = find_plci_by_plci(card, cmsg->adr.adrPLCI))) - goto notfound; - - if (card->bchans[plcip->chan].incoming) { - capi_cmsg_answer(cmsg); - plci_change_state(card, plcip, EV_PLCI_CONNECT_ACTIVE_IND); - send_message(card, cmsg); - } else { - capidrv_ncci *nccip; - capi_cmsg_answer(cmsg); - send_message(card, cmsg); - - nccip = new_ncci(card, plcip, cmsg->adr.adrPLCI); - - if (!nccip) { - printk(KERN_ERR "capidrv-%d: no mem for ncci, sorry\n", card->contrnr); - break; /* $$$$ */ - } - capi_fill_CONNECT_B3_REQ(cmsg, - global.ap.applid, - card->msgid++, - plcip->plci, /* adr */ - NULL /* NCPI */ - ); - nccip->msgid = cmsg->Messagenumber; - plci_change_state(card, plcip, - EV_PLCI_CONNECT_ACTIVE_IND); - ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_REQ); - send_message(card, cmsg); - cmd.command = ISDN_STAT_DCONN; - cmd.driver = card->myid; - cmd.arg = plcip->chan; - card->interface.statcallb(&cmd); - } - break; - - case CAPI_INFO_IND: /* Controller/plci */ - - if (!(plcip = find_plci_by_plci(card, cmsg->adr.adrPLCI))) - goto notfound; - - if (cmsg->InfoNumber == 0x4000) { - if (cmsg->InfoElement[0] == 4) { - cmd.command = ISDN_STAT_CINF; - cmd.driver = card->myid; - cmd.arg = plcip->chan; - sprintf(cmd.parm.num, "%lu", - (unsigned long) - ((u32) cmsg->InfoElement[1] - | ((u32) (cmsg->InfoElement[2]) << 8) - | ((u32) (cmsg->InfoElement[3]) << 16) - | ((u32) (cmsg->InfoElement[4]) << 24))); - card->interface.statcallb(&cmd); - break; - } - } - cdb = capi_cmsg2str(cmsg); - if (cdb) { - printk(KERN_WARNING "capidrv-%d: %s\n", - card->contrnr, cdb->buf); - cdebbuf_free(cdb); - } else - printk(KERN_WARNING "capidrv-%d: CAPI_INFO_IND InfoNumber %x not handled\n", - card->contrnr, cmsg->InfoNumber); - - break; - - case CAPI_CONNECT_ACTIVE_CONF: /* plci */ - goto ignored; - case CAPI_SELECT_B_PROTOCOL_CONF: /* plci */ - goto ignored; - case CAPI_FACILITY_IND: /* Controller/plci/ncci */ - goto ignored; - case CAPI_FACILITY_CONF: /* Controller/plci/ncci */ - goto ignored; - - case CAPI_INFO_CONF: /* Controller/plci */ - goto ignored; - - default: - printk(KERN_ERR "capidrv-%d: got %s for plci 0x%x ???", - card->contrnr, - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->adr.adrPLCI); - } - return; -ignored: - printk(KERN_INFO "capidrv-%d: %s for plci 0x%x ignored\n", - card->contrnr, - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->adr.adrPLCI); - return; -notfound: - printk(KERN_ERR "capidrv-%d: %s: plci 0x%x not found\n", - card->contrnr, - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->adr.adrPLCI); - return; -} - -static void handle_ncci(_cmsg *cmsg) -{ - capidrv_contr *card = findcontrbynumber(cmsg->adr.adrController & 0x7f); - capidrv_plci *plcip; - capidrv_ncci *nccip; - isdn_ctrl cmd; - int len; - - if (!card) { - printk(KERN_ERR "capidrv: %s from unknown controller 0x%x\n", - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->adr.adrController & 0x7f); - return; - } - switch (CAPICMD(cmsg->Command, cmsg->Subcommand)) { - - case CAPI_CONNECT_B3_ACTIVE_IND: /* ncci */ - if (!(nccip = find_ncci(card, cmsg->adr.adrNCCI))) - goto notfound; - - capi_cmsg_answer(cmsg); - ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_ACTIVE_IND); - send_message(card, cmsg); - - cmd.command = ISDN_STAT_BCONN; - cmd.driver = card->myid; - cmd.arg = nccip->chan; - card->interface.statcallb(&cmd); - - printk(KERN_INFO "capidrv-%d: chan %d up with ncci 0x%x\n", - card->contrnr, nccip->chan, nccip->ncci); - break; - - case CAPI_CONNECT_B3_ACTIVE_CONF: /* ncci */ - goto ignored; - - case CAPI_CONNECT_B3_IND: /* ncci */ - - plcip = find_plci_by_ncci(card, cmsg->adr.adrNCCI); - if (plcip) { - nccip = new_ncci(card, plcip, cmsg->adr.adrNCCI); - if (nccip) { - ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_IND); - capi_fill_CONNECT_B3_RESP(cmsg, - global.ap.applid, - card->msgid++, - nccip->ncci, /* adr */ - 0, /* Reject */ - NULL /* NCPI */ - ); - ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_RESP); - send_message(card, cmsg); - break; - } - printk(KERN_ERR "capidrv-%d: no mem for ncci, sorry\n", card->contrnr); - } else { - printk(KERN_ERR "capidrv-%d: %s: plci for ncci 0x%x not found\n", - card->contrnr, - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->adr.adrNCCI); - } - capi_fill_CONNECT_B3_RESP(cmsg, - global.ap.applid, - card->msgid++, - cmsg->adr.adrNCCI, - 2, /* Reject */ - NULL /* NCPI */ - ); - send_message(card, cmsg); - break; - - case CAPI_CONNECT_B3_CONF: /* ncci */ - - if (!(nccip = find_ncci_by_msgid(card, - cmsg->adr.adrNCCI, - cmsg->Messagenumber))) - goto notfound; - - nccip->ncci = cmsg->adr.adrNCCI; - if (cmsg->Info) { - printk(KERN_INFO "capidrv-%d: %s info 0x%x (%s) for ncci 0x%x\n", - card->contrnr, - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->Info, capi_info2str(cmsg->Info), - cmsg->adr.adrNCCI); - } - - if (cmsg->Info) - ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_CONF_ERROR); - else - ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_CONF_OK); - break; - - case CAPI_CONNECT_B3_T90_ACTIVE_IND: /* ncci */ - capi_cmsg_answer(cmsg); - send_message(card, cmsg); - break; - - case CAPI_DATA_B3_IND: /* ncci */ - /* handled in handle_data() */ - goto ignored; - - case CAPI_DATA_B3_CONF: /* ncci */ - if (cmsg->Info) { - printk(KERN_WARNING "CAPI_DATA_B3_CONF: Info %x - %s\n", - cmsg->Info, capi_info2str(cmsg->Info)); - } - if (!(nccip = find_ncci(card, cmsg->adr.adrNCCI))) - goto notfound; - - len = capidrv_del_ack(nccip, cmsg->DataHandle); - if (len < 0) - break; - cmd.command = ISDN_STAT_BSENT; - cmd.driver = card->myid; - cmd.arg = nccip->chan; - cmd.parm.length = len; - card->interface.statcallb(&cmd); - break; - - case CAPI_DISCONNECT_B3_IND: /* ncci */ - if (!(nccip = find_ncci(card, cmsg->adr.adrNCCI))) - goto notfound; - - card->bchans[nccip->chan].disconnecting = 1; - ncci_change_state(card, nccip, EV_NCCI_DISCONNECT_B3_IND); - capi_cmsg_answer(cmsg); - ncci_change_state(card, nccip, EV_NCCI_DISCONNECT_B3_RESP); - send_message(card, cmsg); - break; - - case CAPI_DISCONNECT_B3_CONF: /* ncci */ - if (!(nccip = find_ncci(card, cmsg->adr.adrNCCI))) - goto notfound; - if (cmsg->Info) { - printk(KERN_INFO "capidrv-%d: %s info 0x%x (%s) for ncci 0x%x\n", - card->contrnr, - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->Info, capi_info2str(cmsg->Info), - cmsg->adr.adrNCCI); - ncci_change_state(card, nccip, EV_NCCI_DISCONNECT_B3_CONF_ERROR); - } - break; - - case CAPI_RESET_B3_IND: /* ncci */ - if (!(nccip = find_ncci(card, cmsg->adr.adrNCCI))) - goto notfound; - ncci_change_state(card, nccip, EV_NCCI_RESET_B3_IND); - capi_cmsg_answer(cmsg); - send_message(card, cmsg); - break; - - case CAPI_RESET_B3_CONF: /* ncci */ - goto ignored; /* $$$$ */ - - case CAPI_FACILITY_IND: /* Controller/plci/ncci */ - goto ignored; - case CAPI_FACILITY_CONF: /* Controller/plci/ncci */ - goto ignored; - - default: - printk(KERN_ERR "capidrv-%d: got %s for ncci 0x%x ???", - card->contrnr, - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->adr.adrNCCI); - } - return; -ignored: - printk(KERN_INFO "capidrv-%d: %s for ncci 0x%x ignored\n", - card->contrnr, - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->adr.adrNCCI); - return; -notfound: - printk(KERN_ERR "capidrv-%d: %s: ncci 0x%x not found\n", - card->contrnr, - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->adr.adrNCCI); -} - - -static void handle_data(_cmsg *cmsg, struct sk_buff *skb) -{ - capidrv_contr *card = findcontrbynumber(cmsg->adr.adrController & 0x7f); - capidrv_ncci *nccip; - - if (!card) { - printk(KERN_ERR "capidrv: %s from unknown controller 0x%x\n", - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->adr.adrController & 0x7f); - kfree_skb(skb); - return; - } - if (!(nccip = find_ncci(card, cmsg->adr.adrNCCI))) { - printk(KERN_ERR "capidrv-%d: %s: ncci 0x%x not found\n", - card->contrnr, - capi_cmd2str(cmsg->Command, cmsg->Subcommand), - cmsg->adr.adrNCCI); - kfree_skb(skb); - return; - } - (void) skb_pull(skb, CAPIMSG_LEN(skb->data)); - card->interface.rcvcallb_skb(card->myid, nccip->chan, skb); - capi_cmsg_answer(cmsg); - send_message(card, cmsg); -} - -static _cmsg s_cmsg; - -static void capidrv_recv_message(struct capi20_appl *ap, struct sk_buff *skb) -{ - if (capi_message2cmsg(&s_cmsg, skb->data)) { - printk(KERN_ERR "capidrv: applid=%d: received invalid message\n", - ap->applid); - kfree_skb(skb); - return; - } - if (debugmode > 3) { - _cdebbuf *cdb = capi_cmsg2str(&s_cmsg); - - if (cdb) { - printk(KERN_DEBUG "%s: applid=%d %s\n", __func__, - ap->applid, cdb->buf); - cdebbuf_free(cdb); - } else - printk(KERN_DEBUG "%s: applid=%d %s not traced\n", - __func__, ap->applid, - capi_cmd2str(s_cmsg.Command, s_cmsg.Subcommand)); - } - if (s_cmsg.Command == CAPI_DATA_B3 - && s_cmsg.Subcommand == CAPI_IND) { - handle_data(&s_cmsg, skb); - return; - } - if ((s_cmsg.adr.adrController & 0xffffff00) == 0) - handle_controller(&s_cmsg); - else if ((s_cmsg.adr.adrPLCI & 0xffff0000) == 0) - handle_plci(&s_cmsg); - else - handle_ncci(&s_cmsg); - /* - * data of skb used in s_cmsg, - * free data when s_cmsg is not used again - * thanks to Lars Heete - */ - kfree_skb(skb); -} - -/* ------------------------------------------------------------------- */ - -#define PUTBYTE_TO_STATUS(card, byte) \ - do { \ - *(card)->q931_write++ = (byte); \ - if ((card)->q931_write > (card)->q931_end) \ - (card)->q931_write = (card)->q931_buf; \ - } while (0) - -static void handle_dtrace_data(capidrv_contr *card, - int send, int level2, u8 *data, u16 len) -{ - u8 *p, *end; - isdn_ctrl cmd; - - if (!len) { - printk(KERN_DEBUG "capidrv-%d: avmb1_q931_data: len == %d\n", - card->contrnr, len); - return; - } - - if (level2) { - PUTBYTE_TO_STATUS(card, 'D'); - PUTBYTE_TO_STATUS(card, '2'); - PUTBYTE_TO_STATUS(card, send ? '>' : '<'); - PUTBYTE_TO_STATUS(card, ':'); - } else { - PUTBYTE_TO_STATUS(card, 'D'); - PUTBYTE_TO_STATUS(card, '3'); - PUTBYTE_TO_STATUS(card, send ? '>' : '<'); - PUTBYTE_TO_STATUS(card, ':'); - } - - for (p = data, end = data + len; p < end; p++) { - PUTBYTE_TO_STATUS(card, ' '); - PUTBYTE_TO_STATUS(card, hex_asc_hi(*p)); - PUTBYTE_TO_STATUS(card, hex_asc_lo(*p)); - } - PUTBYTE_TO_STATUS(card, '\n'); - - cmd.command = ISDN_STAT_STAVAIL; - cmd.driver = card->myid; - cmd.arg = len * 3 + 5; - card->interface.statcallb(&cmd); -} - -/* ------------------------------------------------------------------- */ - -static _cmsg cmdcmsg; - -static int capidrv_ioctl(isdn_ctrl *c, capidrv_contr *card) -{ - switch (c->arg) { - case 1: - debugmode = (int)(*((unsigned int *)c->parm.num)); - printk(KERN_DEBUG "capidrv-%d: debugmode=%d\n", - card->contrnr, debugmode); - return 0; - default: - printk(KERN_DEBUG "capidrv-%d: capidrv_ioctl(%ld) called ??\n", - card->contrnr, c->arg); - return -EINVAL; - } - return -EINVAL; -} - -/* - * Handle leased lines (CAPI-Bundling) - */ - -struct internal_bchannelinfo { - unsigned short channelalloc; - unsigned short operation; - unsigned char cmask[31]; -}; - -static int decodeFVteln(char *teln, unsigned long *bmaskp, int *activep) -{ - unsigned long bmask = 0; - int active = !0; - char *s; - int i; - - if (strncmp(teln, "FV:", 3) != 0) - return 1; - s = teln + 3; - while (*s && *s == ' ') s++; - if (!*s) return -2; - if (*s == 'p' || *s == 'P') { - active = 0; - s++; - } - if (*s == 'a' || *s == 'A') { - active = !0; - s++; - } - while (*s) { - int digit1 = 0; - int digit2 = 0; - char *endp; - - digit1 = simple_strtoul(s, &endp, 10); - if (s == endp) - return -3; - s = endp; - - if (digit1 <= 0 || digit1 > 30) return -4; - if (*s == 0 || *s == ',' || *s == ' ') { - bmask |= (1 << digit1); - digit1 = 0; - if (*s) s++; - continue; - } - if (*s != '-') return -5; - s++; - - digit2 = simple_strtoul(s, &endp, 10); - if (s == endp) - return -3; - s = endp; - - if (digit2 <= 0 || digit2 > 30) return -4; - if (*s == 0 || *s == ',' || *s == ' ') { - if (digit1 > digit2) - for (i = digit2; i <= digit1; i++) - bmask |= (1 << i); - else - for (i = digit1; i <= digit2; i++) - bmask |= (1 << i); - digit1 = digit2 = 0; - if (*s) s++; - continue; - } - return -6; - } - if (activep) *activep = active; - if (bmaskp) *bmaskp = bmask; - return 0; -} - -static int FVteln2capi20(char *teln, u8 AdditionalInfo[1 + 2 + 2 + 31]) -{ - unsigned long bmask; - int active; - int rc, i; - - rc = decodeFVteln(teln, &bmask, &active); - if (rc) return rc; - /* Length */ - AdditionalInfo[0] = 2 + 2 + 31; - /* Channel: 3 => use channel allocation */ - AdditionalInfo[1] = 3; AdditionalInfo[2] = 0; - /* Operation: 0 => DTE mode, 1 => DCE mode */ - if (active) { - AdditionalInfo[3] = 0; AdditionalInfo[4] = 0; - } else { - AdditionalInfo[3] = 1; AdditionalInfo[4] = 0; - } - /* Channel mask array */ - AdditionalInfo[5] = 0; /* no D-Channel */ - for (i = 1; i <= 30; i++) - AdditionalInfo[5 + i] = (bmask & (1 << i)) ? 0xff : 0; - return 0; -} - -static int capidrv_command(isdn_ctrl *c, capidrv_contr *card) -{ - isdn_ctrl cmd; - struct capidrv_bchan *bchan; - struct capidrv_plci *plcip; - u8 AdditionalInfo[1 + 2 + 2 + 31]; - int rc, isleasedline = 0; - - if (c->command == ISDN_CMD_IOCTL) - return capidrv_ioctl(c, card); - - switch (c->command) { - case ISDN_CMD_DIAL: { - u8 calling[ISDN_MSNLEN + 3]; - u8 called[ISDN_MSNLEN + 2]; - - if (debugmode) - printk(KERN_DEBUG "capidrv-%d: ISDN_CMD_DIAL(ch=%ld,\"%s,%d,%d,%s\")\n", - card->contrnr, - c->arg, - c->parm.setup.phone, - c->parm.setup.si1, - c->parm.setup.si2, - c->parm.setup.eazmsn); - - bchan = &card->bchans[c->arg % card->nbchan]; - - if (bchan->plcip) { - printk(KERN_ERR "capidrv-%d: dail ch=%ld,\"%s,%d,%d,%s\" in use (plci=0x%x)\n", - card->contrnr, - c->arg, - c->parm.setup.phone, - c->parm.setup.si1, - c->parm.setup.si2, - c->parm.setup.eazmsn, - bchan->plcip->plci); - return 0; - } - bchan->si1 = c->parm.setup.si1; - bchan->si2 = c->parm.setup.si2; - - strncpy(bchan->num, c->parm.setup.phone, sizeof(bchan->num)); - strncpy(bchan->mynum, c->parm.setup.eazmsn, sizeof(bchan->mynum)); - rc = FVteln2capi20(bchan->num, AdditionalInfo); - isleasedline = (rc == 0); - if (rc < 0) - printk(KERN_ERR "capidrv-%d: WARNING: invalid leased linedefinition \"%s\"\n", card->contrnr, bchan->num); - - if (isleasedline) { - calling[0] = 0; - called[0] = 0; - if (debugmode) - printk(KERN_DEBUG "capidrv-%d: connecting leased line\n", card->contrnr); - } else { - calling[0] = strlen(bchan->mynum) + 2; - calling[1] = 0; - calling[2] = 0x80; - strncpy(calling + 3, bchan->mynum, ISDN_MSNLEN); - called[0] = strlen(bchan->num) + 1; - called[1] = 0x80; - strncpy(called + 2, bchan->num, ISDN_MSNLEN); - } - - capi_fill_CONNECT_REQ(&cmdcmsg, - global.ap.applid, - card->msgid++, - card->contrnr, /* adr */ - si2cip(bchan->si1, bchan->si2), /* cipvalue */ - called, /* CalledPartyNumber */ - calling, /* CallingPartyNumber */ - NULL, /* CalledPartySubaddress */ - NULL, /* CallingPartySubaddress */ - b1prot(bchan->l2, bchan->l3), /* B1protocol */ - b2prot(bchan->l2, bchan->l3), /* B2protocol */ - b3prot(bchan->l2, bchan->l3), /* B3protocol */ - b1config(bchan->l2, bchan->l3), /* B1configuration */ - NULL, /* B2configuration */ - NULL, /* B3configuration */ - NULL, /* BC */ - NULL, /* LLC */ - NULL, /* HLC */ - /* BChannelinformation */ - isleasedline ? AdditionalInfo : NULL, - NULL, /* Keypadfacility */ - NULL, /* Useruserdata */ - NULL /* Facilitydataarray */ - ); - if ((plcip = new_plci(card, (c->arg % card->nbchan))) == NULL) { - cmd.command = ISDN_STAT_DHUP; - cmd.driver = card->myid; - cmd.arg = (c->arg % card->nbchan); - card->interface.statcallb(&cmd); - return -1; - } - plcip->msgid = cmdcmsg.Messagenumber; - plcip->leasedline = isleasedline; - plci_change_state(card, plcip, EV_PLCI_CONNECT_REQ); - send_message(card, &cmdcmsg); - return 0; - } - - case ISDN_CMD_ACCEPTD: - - bchan = &card->bchans[c->arg % card->nbchan]; - if (debugmode) - printk(KERN_DEBUG "capidrv-%d: ISDN_CMD_ACCEPTD(ch=%ld) l2=%d l3=%d\n", - card->contrnr, - c->arg, bchan->l2, bchan->l3); - - capi_fill_CONNECT_RESP(&cmdcmsg, - global.ap.applid, - card->msgid++, - bchan->plcip->plci, /* adr */ - 0, /* Reject */ - b1prot(bchan->l2, bchan->l3), /* B1protocol */ - b2prot(bchan->l2, bchan->l3), /* B2protocol */ - b3prot(bchan->l2, bchan->l3), /* B3protocol */ - b1config(bchan->l2, bchan->l3), /* B1configuration */ - NULL, /* B2configuration */ - NULL, /* B3configuration */ - NULL, /* ConnectedNumber */ - NULL, /* ConnectedSubaddress */ - NULL, /* LLC */ - NULL, /* BChannelinformation */ - NULL, /* Keypadfacility */ - NULL, /* Useruserdata */ - NULL /* Facilitydataarray */ - ); - if (capi_cmsg2message(&cmdcmsg, cmdcmsg.buf)) { - printk(KERN_ERR "capidrv-%d: capidrv_command: parser failure\n", - card->contrnr); - return -EINVAL; - } - plci_change_state(card, bchan->plcip, EV_PLCI_CONNECT_RESP); - send_message(card, &cmdcmsg); - return 0; - - case ISDN_CMD_ACCEPTB: - if (debugmode) - printk(KERN_DEBUG "capidrv-%d: ISDN_CMD_ACCEPTB(ch=%ld)\n", - card->contrnr, - c->arg); - return -ENOSYS; - - case ISDN_CMD_HANGUP: - if (debugmode) - printk(KERN_DEBUG "capidrv-%d: ISDN_CMD_HANGUP(ch=%ld)\n", - card->contrnr, - c->arg); - bchan = &card->bchans[c->arg % card->nbchan]; - - if (bchan->disconnecting) { - if (debugmode) - printk(KERN_DEBUG "capidrv-%d: chan %ld already disconnecting ...\n", - card->contrnr, - c->arg); - return 0; - } - if (bchan->nccip) { - bchan->disconnecting = 1; - capi_fill_DISCONNECT_B3_REQ(&cmdcmsg, - global.ap.applid, - card->msgid++, - bchan->nccip->ncci, - NULL /* NCPI */ - ); - ncci_change_state(card, bchan->nccip, EV_NCCI_DISCONNECT_B3_REQ); - send_message(card, &cmdcmsg); - return 0; - } else if (bchan->plcip) { - if (bchan->plcip->state == ST_PLCI_INCOMING) { - /* - * just ignore, we a called from - * isdn_status_callback(), - * which will return 0 or 2, this is handled - * by the CONNECT_IND handler - */ - bchan->disconnecting = 1; - return 0; - } else if (bchan->plcip->plci) { - bchan->disconnecting = 1; - capi_fill_DISCONNECT_REQ(&cmdcmsg, - global.ap.applid, - card->msgid++, - bchan->plcip->plci, - NULL, /* BChannelinformation */ - NULL, /* Keypadfacility */ - NULL, /* Useruserdata */ - NULL /* Facilitydataarray */ - ); - plci_change_state(card, bchan->plcip, EV_PLCI_DISCONNECT_REQ); - send_message(card, &cmdcmsg); - return 0; - } else { - printk(KERN_ERR "capidrv-%d: chan %ld disconnect request while waiting for CONNECT_CONF\n", - card->contrnr, - c->arg); - return -EINVAL; - } - } - printk(KERN_ERR "capidrv-%d: chan %ld disconnect request on free channel\n", - card->contrnr, - c->arg); - return -EINVAL; -/* ready */ - - case ISDN_CMD_SETL2: - if (debugmode) - printk(KERN_DEBUG "capidrv-%d: set L2 on chan %ld to %ld\n", - card->contrnr, - (c->arg & 0xff), (c->arg >> 8)); - bchan = &card->bchans[(c->arg & 0xff) % card->nbchan]; - bchan->l2 = (c->arg >> 8); - return 0; - - case ISDN_CMD_SETL3: - if (debugmode) - printk(KERN_DEBUG "capidrv-%d: set L3 on chan %ld to %ld\n", - card->contrnr, - (c->arg & 0xff), (c->arg >> 8)); - bchan = &card->bchans[(c->arg & 0xff) % card->nbchan]; - bchan->l3 = (c->arg >> 8); - return 0; - - case ISDN_CMD_SETEAZ: - if (debugmode) - printk(KERN_DEBUG "capidrv-%d: set EAZ \"%s\" on chan %ld\n", - card->contrnr, - c->parm.num, c->arg); - bchan = &card->bchans[c->arg % card->nbchan]; - strncpy(bchan->msn, c->parm.num, ISDN_MSNLEN); - return 0; - - case ISDN_CMD_CLREAZ: - if (debugmode) - printk(KERN_DEBUG "capidrv-%d: clearing EAZ on chan %ld\n", - card->contrnr, c->arg); - bchan = &card->bchans[c->arg % card->nbchan]; - bchan->msn[0] = 0; - return 0; - - default: - printk(KERN_ERR "capidrv-%d: ISDN_CMD_%d, Huh?\n", - card->contrnr, c->command); - return -EINVAL; - } - return 0; -} - -static int if_command(isdn_ctrl *c) -{ - capidrv_contr *card = findcontrbydriverid(c->driver); - - if (card) - return capidrv_command(c, card); - - printk(KERN_ERR - "capidrv: if_command %d called with invalid driverId %d!\n", - c->command, c->driver); - return -ENODEV; -} - -static _cmsg sendcmsg; - -static int if_sendbuf(int id, int channel, int doack, struct sk_buff *skb) -{ - capidrv_contr *card = findcontrbydriverid(id); - capidrv_bchan *bchan; - capidrv_ncci *nccip; - int len = skb->len; - int msglen; - u16 errcode; - u16 datahandle; - u32 data; - - if (!card) { - printk(KERN_ERR "capidrv: if_sendbuf called with invalid driverId %d!\n", - id); - return 0; - } - if (debugmode > 4) - printk(KERN_DEBUG "capidrv-%d: sendbuf len=%d skb=%p doack=%d\n", - card->contrnr, len, skb, doack); - bchan = &card->bchans[channel % card->nbchan]; - nccip = bchan->nccip; - if (!nccip || nccip->state != ST_NCCI_ACTIVE) { - printk(KERN_ERR "capidrv-%d: if_sendbuf: %s:%d: chan not up!\n", - card->contrnr, card->name, channel); - return 0; - } - datahandle = nccip->datahandle; - - /* - * Here we copy pointer skb->data into the 32-bit 'Data' field. - * The 'Data' field is not used in practice in linux kernel - * (neither in 32 or 64 bit), but should have some value, - * since a CAPI message trace will display it. - * - * The correct value in the 32 bit case is the address of the - * data, in 64 bit it makes no sense, we use 0 there. - */ - -#ifdef CONFIG_64BIT - data = 0; -#else - data = (unsigned long) skb->data; -#endif - - capi_fill_DATA_B3_REQ(&sendcmsg, global.ap.applid, card->msgid++, - nccip->ncci, /* adr */ - data, /* Data */ - skb->len, /* DataLength */ - datahandle, /* DataHandle */ - 0 /* Flags */ - ); - - if (capidrv_add_ack(nccip, datahandle, doack ? (int)skb->len : -1) < 0) - return 0; - - if (capi_cmsg2message(&sendcmsg, sendcmsg.buf)) { - printk(KERN_ERR "capidrv-%d: if_sendbuf: parser failure\n", - card->contrnr); - return -EINVAL; - } - msglen = CAPIMSG_LEN(sendcmsg.buf); - if (skb_headroom(skb) < msglen) { - struct sk_buff *nskb = skb_realloc_headroom(skb, msglen); - if (!nskb) { - printk(KERN_ERR "capidrv-%d: if_sendbuf: no memory\n", - card->contrnr); - (void)capidrv_del_ack(nccip, datahandle); - return 0; - } - printk(KERN_DEBUG "capidrv-%d: only %d bytes headroom, need %d\n", - card->contrnr, skb_headroom(skb), msglen); - memcpy(skb_push(nskb, msglen), sendcmsg.buf, msglen); - errcode = capi20_put_message(&global.ap, nskb); - if (errcode == CAPI_NOERROR) { - dev_kfree_skb(skb); - nccip->datahandle++; - return len; - } - if (debugmode > 3) - printk(KERN_DEBUG "capidrv-%d: sendbuf putmsg ret(%x) - %s\n", - card->contrnr, errcode, capi_info2str(errcode)); - (void)capidrv_del_ack(nccip, datahandle); - dev_kfree_skb(nskb); - return errcode == CAPI_SENDQUEUEFULL ? 0 : -1; - } else { - memcpy(skb_push(skb, msglen), sendcmsg.buf, msglen); - errcode = capi20_put_message(&global.ap, skb); - if (errcode == CAPI_NOERROR) { - nccip->datahandle++; - return len; - } - if (debugmode > 3) - printk(KERN_DEBUG "capidrv-%d: sendbuf putmsg ret(%x) - %s\n", - card->contrnr, errcode, capi_info2str(errcode)); - skb_pull(skb, msglen); - (void)capidrv_del_ack(nccip, datahandle); - return errcode == CAPI_SENDQUEUEFULL ? 0 : -1; - } -} - -static int if_readstat(u8 __user *buf, int len, int id, int channel) -{ - capidrv_contr *card = findcontrbydriverid(id); - int count; - u8 __user *p; - - if (!card) { - printk(KERN_ERR "capidrv: if_readstat called with invalid driverId %d!\n", - id); - return -ENODEV; - } - - for (p = buf, count = 0; count < len; p++, count++) { - if (put_user(*card->q931_read++, p)) - return -EFAULT; - if (card->q931_read > card->q931_end) - card->q931_read = card->q931_buf; - } - return count; - -} - -static void enable_dchannel_trace(capidrv_contr *card) -{ - u8 manufacturer[CAPI_MANUFACTURER_LEN]; - capi_version version; - u16 contr = card->contrnr; - u16 errcode; - u16 avmversion[3]; - - errcode = capi20_get_manufacturer(contr, manufacturer); - if (errcode != CAPI_NOERROR) { - printk(KERN_ERR "%s: can't get manufacturer (0x%x)\n", - card->name, errcode); - return; - } - if (strstr(manufacturer, "AVM") == NULL) { - printk(KERN_ERR "%s: not from AVM, no d-channel trace possible (%s)\n", - card->name, manufacturer); - return; - } - errcode = capi20_get_version(contr, &version); - if (errcode != CAPI_NOERROR) { - printk(KERN_ERR "%s: can't get version (0x%x)\n", - card->name, errcode); - return; - } - avmversion[0] = (version.majormanuversion >> 4) & 0x0f; - avmversion[1] = (version.majormanuversion << 4) & 0xf0; - avmversion[1] |= (version.minormanuversion >> 4) & 0x0f; - avmversion[2] |= version.minormanuversion & 0x0f; - - if (avmversion[0] > 3 || (avmversion[0] == 3 && avmversion[1] > 5)) { - printk(KERN_INFO "%s: D2 trace enabled\n", card->name); - capi_fill_MANUFACTURER_REQ(&cmdcmsg, global.ap.applid, - card->msgid++, - contr, - 0x214D5641, /* ManuID */ - 0, /* Class */ - 1, /* Function */ - (_cstruct)"\004\200\014\000\000"); - } else { - printk(KERN_INFO "%s: D3 trace enabled\n", card->name); - capi_fill_MANUFACTURER_REQ(&cmdcmsg, global.ap.applid, - card->msgid++, - contr, - 0x214D5641, /* ManuID */ - 0, /* Class */ - 1, /* Function */ - (_cstruct)"\004\002\003\000\000"); - } - send_message(card, &cmdcmsg); -} - - -static void send_listen(capidrv_contr *card) -{ - capi_fill_LISTEN_REQ(&cmdcmsg, global.ap.applid, - card->msgid++, - card->contrnr, /* controller */ - 1 << 6, /* Infomask */ - card->cipmask, - card->cipmask2, - NULL, NULL); - listen_change_state(card, EV_LISTEN_REQ); - send_message(card, &cmdcmsg); -} - -static void listentimerfunc(struct timer_list *t) -{ - capidrv_contr *card = from_timer(card, t, listentimer); - if (card->state != ST_LISTEN_NONE && card->state != ST_LISTEN_ACTIVE) - printk(KERN_ERR "%s: controller dead ??\n", card->name); - send_listen(card); - mod_timer(&card->listentimer, jiffies + 60 * HZ); -} - - -static int capidrv_addcontr(u16 contr, struct capi_profile *profp) -{ - capidrv_contr *card; - unsigned long flags; - isdn_ctrl cmd; - char id[20]; - int i; - - sprintf(id, "capidrv-%d", contr); - if (!try_module_get(THIS_MODULE)) { - printk(KERN_WARNING "capidrv: (%s) Could not reserve module\n", id); - return -1; - } - if (!(card = kzalloc(sizeof(capidrv_contr), GFP_ATOMIC))) { - printk(KERN_WARNING - "capidrv: (%s) Could not allocate contr-struct.\n", id); - return -1; - } - card->owner = THIS_MODULE; - timer_setup(&card->listentimer, listentimerfunc, 0); - strcpy(card->name, id); - card->contrnr = contr; - card->nbchan = profp->nbchannel; - card->bchans = kmalloc_array(card->nbchan, sizeof(capidrv_bchan), - GFP_ATOMIC); - if (!card->bchans) { - printk(KERN_WARNING - "capidrv: (%s) Could not allocate bchan-structs.\n", id); - module_put(card->owner); - kfree(card); - return -1; - } - card->interface.channels = profp->nbchannel; - card->interface.maxbufsize = 2048; - card->interface.command = if_command; - card->interface.writebuf_skb = if_sendbuf; - card->interface.writecmd = NULL; - card->interface.readstat = if_readstat; - card->interface.features = - ISDN_FEATURE_L2_HDLC | - ISDN_FEATURE_L2_TRANS | - ISDN_FEATURE_L3_TRANS | - ISDN_FEATURE_P_UNKNOWN | - ISDN_FEATURE_L2_X75I | - ISDN_FEATURE_L2_X75UI | - ISDN_FEATURE_L2_X75BUI; - if (profp->support1 & (1 << 2)) - card->interface.features |= - ISDN_FEATURE_L2_V11096 | - ISDN_FEATURE_L2_V11019 | - ISDN_FEATURE_L2_V11038; - if (profp->support1 & (1 << 8)) - card->interface.features |= ISDN_FEATURE_L2_MODEM; - card->interface.hl_hdrlen = 22; /* len of DATA_B3_REQ */ - strncpy(card->interface.id, id, sizeof(card->interface.id) - 1); - - - card->q931_read = card->q931_buf; - card->q931_write = card->q931_buf; - card->q931_end = card->q931_buf + sizeof(card->q931_buf) - 1; - - if (!register_isdn(&card->interface)) { - printk(KERN_ERR "capidrv: Unable to register contr %s\n", id); - kfree(card->bchans); - module_put(card->owner); - kfree(card); - return -1; - } - card->myid = card->interface.channels; - memset(card->bchans, 0, sizeof(capidrv_bchan) * card->nbchan); - for (i = 0; i < card->nbchan; i++) { - card->bchans[i].contr = card; - } - - spin_lock_irqsave(&global_lock, flags); - card->next = global.contr_list; - global.contr_list = card; - global.ncontr++; - spin_unlock_irqrestore(&global_lock, flags); - - cmd.command = ISDN_STAT_RUN; - cmd.driver = card->myid; - card->interface.statcallb(&cmd); - - card->cipmask = 0x1FFF03FF; /* any */ - card->cipmask2 = 0; - - send_listen(card); - mod_timer(&card->listentimer, jiffies + 60 * HZ); - - printk(KERN_INFO "%s: now up (%d B channels)\n", - card->name, card->nbchan); - - enable_dchannel_trace(card); - - return 0; -} - -static int capidrv_delcontr(u16 contr) -{ - capidrv_contr **pp, *card; - unsigned long flags; - isdn_ctrl cmd; - - spin_lock_irqsave(&global_lock, flags); - for (card = global.contr_list; card; card = card->next) { - if (card->contrnr == contr) - break; - } - if (!card) { - spin_unlock_irqrestore(&global_lock, flags); - printk(KERN_ERR "capidrv: delcontr: no contr %u\n", contr); - return -1; - } - - /* FIXME: maybe a race condition the card should be removed - * here from global list /kkeil - */ - spin_unlock_irqrestore(&global_lock, flags); - - del_timer(&card->listentimer); - - if (debugmode) - printk(KERN_DEBUG "capidrv-%d: id=%d unloading\n", - card->contrnr, card->myid); - - cmd.command = ISDN_STAT_STOP; - cmd.driver = card->myid; - card->interface.statcallb(&cmd); - - while (card->nbchan) { - - cmd.command = ISDN_STAT_DISCH; - cmd.driver = card->myid; - cmd.arg = card->nbchan - 1; - cmd.parm.num[0] = 0; - if (debugmode) - printk(KERN_DEBUG "capidrv-%d: id=%d disable chan=%ld\n", - card->contrnr, card->myid, cmd.arg); - card->interface.statcallb(&cmd); - - if (card->bchans[card->nbchan - 1].nccip) - free_ncci(card, card->bchans[card->nbchan - 1].nccip); - if (card->bchans[card->nbchan - 1].plcip) - free_plci(card, card->bchans[card->nbchan - 1].plcip); - if (card->plci_list) - printk(KERN_ERR "capidrv: bug in free_plci()\n"); - card->nbchan--; - } - kfree(card->bchans); - card->bchans = NULL; - - if (debugmode) - printk(KERN_DEBUG "capidrv-%d: id=%d isdn unload\n", - card->contrnr, card->myid); - - cmd.command = ISDN_STAT_UNLOAD; - cmd.driver = card->myid; - card->interface.statcallb(&cmd); - - if (debugmode) - printk(KERN_DEBUG "capidrv-%d: id=%d remove contr from list\n", - card->contrnr, card->myid); - - spin_lock_irqsave(&global_lock, flags); - for (pp = &global.contr_list; *pp; pp = &(*pp)->next) { - if (*pp == card) { - *pp = (*pp)->next; - card->next = NULL; - global.ncontr--; - break; - } - } - spin_unlock_irqrestore(&global_lock, flags); - - module_put(card->owner); - printk(KERN_INFO "%s: now down.\n", card->name); - kfree(card); - return 0; -} - - -static int -lower_callback(struct notifier_block *nb, unsigned long val, void *v) -{ - capi_profile profile; - u32 contr = (long)v; - - switch (val) { - case CAPICTR_UP: - printk(KERN_INFO "capidrv: controller %hu up\n", contr); - if (capi20_get_profile(contr, &profile) == CAPI_NOERROR) - (void) capidrv_addcontr(contr, &profile); - break; - case CAPICTR_DOWN: - printk(KERN_INFO "capidrv: controller %hu down\n", contr); - (void) capidrv_delcontr(contr); - break; - } - return NOTIFY_OK; -} - -/* - * /proc/capi/capidrv: - * nrecvctlpkt nrecvdatapkt nsendctlpkt nsenddatapkt - */ -static int __maybe_unused capidrv_proc_show(struct seq_file *m, void *v) -{ - seq_printf(m, "%lu %lu %lu %lu\n", - global.ap.nrecvctlpkt, - global.ap.nrecvdatapkt, - global.ap.nsentctlpkt, - global.ap.nsentdatapkt); - return 0; -} - -static void __init proc_init(void) -{ - proc_create_single("capi/capidrv", 0, NULL, capidrv_proc_show); -} - -static void __exit proc_exit(void) -{ - remove_proc_entry("capi/capidrv", NULL); -} - -static struct notifier_block capictr_nb = { - .notifier_call = lower_callback, -}; - -static int __init capidrv_init(void) -{ - capi_profile profile; - u32 ncontr, contr; - u16 errcode; - - global.ap.rparam.level3cnt = -2; /* number of bchannels twice */ - global.ap.rparam.datablkcnt = 16; - global.ap.rparam.datablklen = 2048; - - global.ap.recv_message = capidrv_recv_message; - errcode = capi20_register(&global.ap); - if (errcode) { - return -EIO; - } - - register_capictr_notifier(&capictr_nb); - - errcode = capi20_get_profile(0, &profile); - if (errcode != CAPI_NOERROR) { - unregister_capictr_notifier(&capictr_nb); - capi20_release(&global.ap); - return -EIO; - } - - ncontr = profile.ncontroller; - for (contr = 1; contr <= ncontr; contr++) { - errcode = capi20_get_profile(contr, &profile); - if (errcode != CAPI_NOERROR) - continue; - (void) capidrv_addcontr(contr, &profile); - } - proc_init(); - - return 0; -} - -static void __exit capidrv_exit(void) -{ - unregister_capictr_notifier(&capictr_nb); - capi20_release(&global.ap); - - proc_exit(); -} - -module_init(capidrv_init); -module_exit(capidrv_exit); diff --git a/drivers/isdn/capi/capidrv.h b/drivers/isdn/capi/capidrv.h deleted file mode 100644 index 4466b2e0176d..000000000000 --- a/drivers/isdn/capi/capidrv.h +++ /dev/null @@ -1,140 +0,0 @@ -/* $Id: capidrv.h,v 1.2.8.2 2001/09/23 22:24:33 kai Exp $ - * - * ISDN4Linux Driver, using capi20 interface (kernelcapi) - * - * Copyright 1997 by Carsten Paeth - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#ifndef __CAPIDRV_H__ -#define __CAPIDRV_H__ - -/* - * LISTEN state machine - */ -#define ST_LISTEN_NONE 0 /* L-0 */ -#define ST_LISTEN_WAIT_CONF 1 /* L-0.1 */ -#define ST_LISTEN_ACTIVE 2 /* L-1 */ -#define ST_LISTEN_ACTIVE_WAIT_CONF 3 /* L-1.1 */ - - -#define EV_LISTEN_REQ 1 /* L-0 -> L-0.1 - L-1 -> L-1.1 */ -#define EV_LISTEN_CONF_ERROR 2 /* L-0.1 -> L-0 - L-1.1 -> L-1 */ -#define EV_LISTEN_CONF_EMPTY 3 /* L-0.1 -> L-0 - L-1.1 -> L-0 */ -#define EV_LISTEN_CONF_OK 4 /* L-0.1 -> L-1 - L-1.1 -> L.1 */ - -/* - * per plci state machine - */ -#define ST_PLCI_NONE 0 /* P-0 */ -#define ST_PLCI_OUTGOING 1 /* P-0.1 */ -#define ST_PLCI_ALLOCATED 2 /* P-1 */ -#define ST_PLCI_ACTIVE 3 /* P-ACT */ -#define ST_PLCI_INCOMING 4 /* P-2 */ -#define ST_PLCI_FACILITY_IND 5 /* P-3 */ -#define ST_PLCI_ACCEPTING 6 /* P-4 */ -#define ST_PLCI_DISCONNECTING 7 /* P-5 */ -#define ST_PLCI_DISCONNECTED 8 /* P-6 */ -#define ST_PLCI_RESUMEING 9 /* P-0.Res */ -#define ST_PLCI_RESUME 10 /* P-Res */ -#define ST_PLCI_HELD 11 /* P-HELD */ - -#define EV_PLCI_CONNECT_REQ 1 /* P-0 -> P-0.1 - */ -#define EV_PLCI_CONNECT_CONF_ERROR 2 /* P-0.1 -> P-0 - */ -#define EV_PLCI_CONNECT_CONF_OK 3 /* P-0.1 -> P-1 - */ -#define EV_PLCI_FACILITY_IND_UP 4 /* P-0 -> P-1 - */ -#define EV_PLCI_CONNECT_IND 5 /* P-0 -> P-2 - */ -#define EV_PLCI_CONNECT_ACTIVE_IND 6 /* P-1 -> P-ACT - */ -#define EV_PLCI_CONNECT_REJECT 7 /* P-2 -> P-5 - P-3 -> P-5 - */ -#define EV_PLCI_DISCONNECT_REQ 8 /* P-1 -> P-5 - P-2 -> P-5 - P-3 -> P-5 - P-4 -> P-5 - P-ACT -> P-5 - P-Res -> P-5 (*) - P-HELD -> P-5 (*) - */ -#define EV_PLCI_DISCONNECT_IND 9 /* P-1 -> P-6 - P-2 -> P-6 - P-3 -> P-6 - P-4 -> P-6 - P-5 -> P-6 - P-ACT -> P-6 - P-Res -> P-6 (*) - P-HELD -> P-6 (*) - */ -#define EV_PLCI_FACILITY_IND_DOWN 10 /* P-0.1 -> P-5 - P-1 -> P-5 - P-ACT -> P-5 - P-2 -> P-5 - P-3 -> P-5 - P-4 -> P-5 - */ -#define EV_PLCI_DISCONNECT_RESP 11 /* P-6 -> P-0 - */ -#define EV_PLCI_CONNECT_RESP 12 /* P-6 -> P-0 - */ - -#define EV_PLCI_RESUME_REQ 13 /* P-0 -> P-0.Res - */ -#define EV_PLCI_RESUME_CONF_OK 14 /* P-0.Res -> P-Res - */ -#define EV_PLCI_RESUME_CONF_ERROR 15 /* P-0.Res -> P-0 - */ -#define EV_PLCI_RESUME_IND 16 /* P-Res -> P-ACT - */ -#define EV_PLCI_HOLD_IND 17 /* P-ACT -> P-HELD - */ -#define EV_PLCI_RETRIEVE_IND 18 /* P-HELD -> P-ACT - */ -#define EV_PLCI_SUSPEND_IND 19 /* P-ACT -> P-5 - */ -#define EV_PLCI_CD_IND 20 /* P-2 -> P-5 - */ - -/* - * per ncci state machine - */ -#define ST_NCCI_PREVIOUS -1 -#define ST_NCCI_NONE 0 /* N-0 */ -#define ST_NCCI_OUTGOING 1 /* N-0.1 */ -#define ST_NCCI_INCOMING 2 /* N-1 */ -#define ST_NCCI_ALLOCATED 3 /* N-2 */ -#define ST_NCCI_ACTIVE 4 /* N-ACT */ -#define ST_NCCI_RESETING 5 /* N-3 */ -#define ST_NCCI_DISCONNECTING 6 /* N-4 */ -#define ST_NCCI_DISCONNECTED 7 /* N-5 */ - -#define EV_NCCI_CONNECT_B3_REQ 1 /* N-0 -> N-0.1 */ -#define EV_NCCI_CONNECT_B3_IND 2 /* N-0 -> N.1 */ -#define EV_NCCI_CONNECT_B3_CONF_OK 3 /* N-0.1 -> N.2 */ -#define EV_NCCI_CONNECT_B3_CONF_ERROR 4 /* N-0.1 -> N.0 */ -#define EV_NCCI_CONNECT_B3_REJECT 5 /* N-1 -> N-4 */ -#define EV_NCCI_CONNECT_B3_RESP 6 /* N-1 -> N-2 */ -#define EV_NCCI_CONNECT_B3_ACTIVE_IND 7 /* N-2 -> N-ACT */ -#define EV_NCCI_RESET_B3_REQ 8 /* N-ACT -> N-3 */ -#define EV_NCCI_RESET_B3_IND 9 /* N-3 -> N-ACT */ -#define EV_NCCI_DISCONNECT_B3_IND 10 /* N-4 -> N.5 */ -#define EV_NCCI_DISCONNECT_B3_CONF_ERROR 11 /* N-4 -> previous */ -#define EV_NCCI_DISCONNECT_B3_REQ 12 /* N-1 -> N-4 - N-2 -> N-4 - N-3 -> N-4 - N-ACT -> N-4 */ -#define EV_NCCI_DISCONNECT_B3_RESP 13 /* N-5 -> N-0 */ - -#endif /* __CAPIDRV_H__ */ diff --git a/drivers/isdn/divert/Makefile b/drivers/isdn/divert/Makefile deleted file mode 100644 index 07684fe53537..000000000000 --- a/drivers/isdn/divert/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# Makefile for the dss1_divert ISDN module - -# Each configuration option enables a list of files. - -obj-$(CONFIG_ISDN_DIVERSION) += dss1_divert.o - -# Multipart objects. - -dss1_divert-y := isdn_divert.o divert_procfs.o divert_init.o diff --git a/drivers/isdn/divert/divert_init.c b/drivers/isdn/divert/divert_init.c deleted file mode 100644 index 267dede13bfd..000000000000 --- a/drivers/isdn/divert/divert_init.c +++ /dev/null @@ -1,82 +0,0 @@ -/* $Id divert_init.c,v 1.5.6.2 2001/01/24 22:18:17 kai Exp $ - * - * Module init for DSS1 diversion services for i4l. - * - * Copyright 1999 by Werner Cornelius (werner@isdn4linux.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#include -#include -#include - -#include "isdn_divert.h" - -MODULE_DESCRIPTION("ISDN4Linux: Call diversion support"); -MODULE_AUTHOR("Werner Cornelius"); -MODULE_LICENSE("GPL"); - -/****************************************/ -/* structure containing interface to hl */ -/****************************************/ -isdn_divert_if divert_if = { - DIVERT_IF_MAGIC, /* magic value */ - DIVERT_CMD_REG, /* register cmd */ - ll_callback, /* callback routine from ll */ - NULL, /* command still not specified */ - NULL, /* drv_to_name */ - NULL, /* name_to_drv */ -}; - -/*************************/ -/* Module interface code */ -/* no cmd line parms */ -/*************************/ -static int __init divert_init(void) -{ - int i; - - if (divert_dev_init()) { - printk(KERN_WARNING "dss1_divert: cannot install device, not loaded\n"); - return (-EIO); - } - if ((i = DIVERT_REG_NAME(&divert_if)) != DIVERT_NO_ERR) { - divert_dev_deinit(); - printk(KERN_WARNING "dss1_divert: error %d registering module, not loaded\n", i); - return (-EIO); - } - printk(KERN_INFO "dss1_divert module successfully installed\n"); - return (0); -} - -/**********************/ -/* Module deinit code */ -/**********************/ -static void __exit divert_exit(void) -{ - unsigned long flags; - int i; - - spin_lock_irqsave(&divert_lock, flags); - divert_if.cmd = DIVERT_CMD_REL; /* release */ - if ((i = DIVERT_REG_NAME(&divert_if)) != DIVERT_NO_ERR) { - printk(KERN_WARNING "dss1_divert: error %d releasing module\n", i); - spin_unlock_irqrestore(&divert_lock, flags); - return; - } - if (divert_dev_deinit()) { - printk(KERN_WARNING "dss1_divert: device busy, remove cancelled\n"); - spin_unlock_irqrestore(&divert_lock, flags); - return; - } - spin_unlock_irqrestore(&divert_lock, flags); - deleterule(-1); /* delete all rules and free mem */ - deleteprocs(); - printk(KERN_INFO "dss1_divert module successfully removed \n"); -} - -module_init(divert_init); -module_exit(divert_exit); diff --git a/drivers/isdn/divert/divert_procfs.c b/drivers/isdn/divert/divert_procfs.c deleted file mode 100644 index 342585e04fd3..000000000000 --- a/drivers/isdn/divert/divert_procfs.c +++ /dev/null @@ -1,336 +0,0 @@ -/* $Id: divert_procfs.c,v 1.11.6.2 2001/09/23 22:24:36 kai Exp $ - * - * Filesystem handling for the diversion supplementary services. - * - * Copyright 1998 by Werner Cornelius (werner@isdn4linux.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#include -#include -#include -#ifdef CONFIG_PROC_FS -#include -#else -#include -#endif -#include -#include -#include -#include -#include "isdn_divert.h" - - -/*********************************/ -/* Variables for interface queue */ -/*********************************/ -ulong if_used = 0; /* number of interface users */ -static DEFINE_MUTEX(isdn_divert_mutex); -static struct divert_info *divert_info_head = NULL; /* head of queue */ -static struct divert_info *divert_info_tail = NULL; /* pointer to last entry */ -static DEFINE_SPINLOCK(divert_info_lock);/* lock for queue */ -static wait_queue_head_t rd_queue; - -/*********************************/ -/* put an info buffer into queue */ -/*********************************/ -void -put_info_buffer(char *cp) -{ - struct divert_info *ib; - unsigned long flags; - - if (if_used <= 0) - return; - if (!cp) - return; - if (!*cp) - return; - if (!(ib = kmalloc(sizeof(struct divert_info) + strlen(cp), GFP_ATOMIC))) - return; /* no memory */ - strcpy(ib->info_start, cp); /* set output string */ - ib->next = NULL; - spin_lock_irqsave(&divert_info_lock, flags); - ib->usage_cnt = if_used; - if (!divert_info_head) - divert_info_head = ib; /* new head */ - else - divert_info_tail->next = ib; /* follows existing messages */ - divert_info_tail = ib; /* new tail */ - - /* delete old entrys */ - while (divert_info_head->next) { - if ((divert_info_head->usage_cnt <= 0) && - (divert_info_head->next->usage_cnt <= 0)) { - ib = divert_info_head; - divert_info_head = divert_info_head->next; - kfree(ib); - } else - break; - } /* divert_info_head->next */ - spin_unlock_irqrestore(&divert_info_lock, flags); - wake_up_interruptible(&(rd_queue)); -} /* put_info_buffer */ - -#ifdef CONFIG_PROC_FS - -/**********************************/ -/* deflection device read routine */ -/**********************************/ -static ssize_t -isdn_divert_read(struct file *file, char __user *buf, size_t count, loff_t *off) -{ - struct divert_info *inf; - int len; - - if (!(inf = *((struct divert_info **) file->private_data))) { - if (file->f_flags & O_NONBLOCK) - return -EAGAIN; - wait_event_interruptible(rd_queue, (inf = - *((struct divert_info **) file->private_data))); - } - if (!inf) - return (0); - - inf->usage_cnt--; /* new usage count */ - file->private_data = &inf->next; /* next structure */ - if ((len = strlen(inf->info_start)) <= count) { - if (copy_to_user(buf, inf->info_start, len)) - return -EFAULT; - *off += len; - return (len); - } - return (0); -} /* isdn_divert_read */ - -/**********************************/ -/* deflection device write routine */ -/**********************************/ -static ssize_t -isdn_divert_write(struct file *file, const char __user *buf, size_t count, loff_t *off) -{ - return (-ENODEV); -} /* isdn_divert_write */ - - -/***************************************/ -/* select routines for various kernels */ -/***************************************/ -static __poll_t -isdn_divert_poll(struct file *file, poll_table *wait) -{ - __poll_t mask = 0; - - poll_wait(file, &(rd_queue), wait); - /* mask = EPOLLOUT | EPOLLWRNORM; */ - if (*((struct divert_info **) file->private_data)) { - mask |= EPOLLIN | EPOLLRDNORM; - } - return mask; -} /* isdn_divert_poll */ - -/****************/ -/* Open routine */ -/****************/ -static int -isdn_divert_open(struct inode *ino, struct file *filep) -{ - unsigned long flags; - - spin_lock_irqsave(&divert_info_lock, flags); - if_used++; - if (divert_info_head) - filep->private_data = &(divert_info_tail->next); - else - filep->private_data = &divert_info_head; - spin_unlock_irqrestore(&divert_info_lock, flags); - /* start_divert(); */ - return nonseekable_open(ino, filep); -} /* isdn_divert_open */ - -/*******************/ -/* close routine */ -/*******************/ -static int -isdn_divert_close(struct inode *ino, struct file *filep) -{ - struct divert_info *inf; - unsigned long flags; - - spin_lock_irqsave(&divert_info_lock, flags); - if_used--; - inf = *((struct divert_info **) filep->private_data); - while (inf) { - inf->usage_cnt--; - inf = inf->next; - } - if (if_used <= 0) - while (divert_info_head) { - inf = divert_info_head; - divert_info_head = divert_info_head->next; - kfree(inf); - } - spin_unlock_irqrestore(&divert_info_lock, flags); - return (0); -} /* isdn_divert_close */ - -/*********/ -/* IOCTL */ -/*********/ -static int isdn_divert_ioctl_unlocked(struct file *file, uint cmd, ulong arg) -{ - divert_ioctl dioctl; - int i; - unsigned long flags; - divert_rule *rulep; - char *cp; - - if (copy_from_user(&dioctl, (void __user *) arg, sizeof(dioctl))) - return -EFAULT; - - switch (cmd) { - case IIOCGETVER: - dioctl.drv_version = DIVERT_IIOC_VERSION; /* set version */ - break; - - case IIOCGETDRV: - if ((dioctl.getid.drvid = divert_if.name_to_drv(dioctl.getid.drvnam)) < 0) - return (-EINVAL); - break; - - case IIOCGETNAM: - cp = divert_if.drv_to_name(dioctl.getid.drvid); - if (!cp) - return (-EINVAL); - if (!*cp) - return (-EINVAL); - strcpy(dioctl.getid.drvnam, cp); - break; - - case IIOCGETRULE: - if (!(rulep = getruleptr(dioctl.getsetrule.ruleidx))) - return (-EINVAL); - dioctl.getsetrule.rule = *rulep; /* copy data */ - break; - - case IIOCMODRULE: - if (!(rulep = getruleptr(dioctl.getsetrule.ruleidx))) - return (-EINVAL); - spin_lock_irqsave(&divert_lock, flags); - *rulep = dioctl.getsetrule.rule; /* copy data */ - spin_unlock_irqrestore(&divert_lock, flags); - return (0); /* no copy required */ - break; - - case IIOCINSRULE: - return (insertrule(dioctl.getsetrule.ruleidx, &dioctl.getsetrule.rule)); - break; - - case IIOCDELRULE: - return (deleterule(dioctl.getsetrule.ruleidx)); - break; - - case IIOCDODFACT: - return (deflect_extern_action(dioctl.fwd_ctrl.subcmd, - dioctl.fwd_ctrl.callid, - dioctl.fwd_ctrl.to_nr)); - - case IIOCDOCFACT: - case IIOCDOCFDIS: - case IIOCDOCFINT: - if (!divert_if.drv_to_name(dioctl.cf_ctrl.drvid)) - return (-EINVAL); /* invalid driver */ - if (strnlen(dioctl.cf_ctrl.msn, sizeof(dioctl.cf_ctrl.msn)) == - sizeof(dioctl.cf_ctrl.msn)) - return -EINVAL; - if (strnlen(dioctl.cf_ctrl.fwd_nr, sizeof(dioctl.cf_ctrl.fwd_nr)) == - sizeof(dioctl.cf_ctrl.fwd_nr)) - return -EINVAL; - if ((i = cf_command(dioctl.cf_ctrl.drvid, - (cmd == IIOCDOCFACT) ? 1 : (cmd == IIOCDOCFDIS) ? 0 : 2, - dioctl.cf_ctrl.cfproc, - dioctl.cf_ctrl.msn, - dioctl.cf_ctrl.service, - dioctl.cf_ctrl.fwd_nr, - &dioctl.cf_ctrl.procid))) - return (i); - break; - - default: - return (-EINVAL); - } /* switch cmd */ - return copy_to_user((void __user *)arg, &dioctl, sizeof(dioctl)) ? -EFAULT : 0; -} /* isdn_divert_ioctl */ - -static long isdn_divert_ioctl(struct file *file, uint cmd, ulong arg) -{ - long ret; - - mutex_lock(&isdn_divert_mutex); - ret = isdn_divert_ioctl_unlocked(file, cmd, arg); - mutex_unlock(&isdn_divert_mutex); - - return ret; -} - -static const struct file_operations isdn_fops = -{ - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = isdn_divert_read, - .write = isdn_divert_write, - .poll = isdn_divert_poll, - .unlocked_ioctl = isdn_divert_ioctl, - .open = isdn_divert_open, - .release = isdn_divert_close, -}; - -/****************************/ -/* isdn subdir in /proc/net */ -/****************************/ -static struct proc_dir_entry *isdn_proc_entry = NULL; -static struct proc_dir_entry *isdn_divert_entry = NULL; -#endif /* CONFIG_PROC_FS */ - -/***************************************************************************/ -/* divert_dev_init must be called before the proc filesystem may be used */ -/***************************************************************************/ -int -divert_dev_init(void) -{ - - init_waitqueue_head(&rd_queue); - -#ifdef CONFIG_PROC_FS - isdn_proc_entry = proc_mkdir("isdn", init_net.proc_net); - if (!isdn_proc_entry) - return (-1); - isdn_divert_entry = proc_create("divert", S_IFREG | S_IRUGO, - isdn_proc_entry, &isdn_fops); - if (!isdn_divert_entry) { - remove_proc_entry("isdn", init_net.proc_net); - return (-1); - } -#endif /* CONFIG_PROC_FS */ - - return (0); -} /* divert_dev_init */ - -/***************************************************************************/ -/* divert_dev_deinit must be called before leaving isdn when included as */ -/* a module. */ -/***************************************************************************/ -int -divert_dev_deinit(void) -{ - -#ifdef CONFIG_PROC_FS - remove_proc_entry("divert", isdn_proc_entry); - remove_proc_entry("isdn", init_net.proc_net); -#endif /* CONFIG_PROC_FS */ - - return (0); -} /* divert_dev_deinit */ diff --git a/drivers/isdn/divert/isdn_divert.c b/drivers/isdn/divert/isdn_divert.c deleted file mode 100644 index 5620fd2c6009..000000000000 --- a/drivers/isdn/divert/isdn_divert.c +++ /dev/null @@ -1,846 +0,0 @@ -/* $Id: isdn_divert.c,v 1.6.6.3 2001/09/23 22:24:36 kai Exp $ - * - * DSS1 main diversion supplementary handling for i4l. - * - * Copyright 1999 by Werner Cornelius (werner@isdn4linux.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#include -#include -#include -#include - -#include "isdn_divert.h" - -/**********************************/ -/* structure keeping calling info */ -/**********************************/ -struct call_struc { - isdn_ctrl ics; /* delivered setup + driver parameters */ - ulong divert_id; /* Id delivered to user */ - unsigned char akt_state; /* actual state */ - char deflect_dest[35]; /* deflection destination */ - struct timer_list timer; /* timer control structure */ - char info[90]; /* device info output */ - struct call_struc *next; /* pointer to next entry */ - struct call_struc *prev; -}; - - -/********************************************/ -/* structure keeping deflection table entry */ -/********************************************/ -struct deflect_struc { - struct deflect_struc *next, *prev; - divert_rule rule; /* used rule */ -}; - - -/*****************************************/ -/* variables for main diversion services */ -/*****************************************/ -/* diversion/deflection processes */ -static struct call_struc *divert_head = NULL; /* head of remembered entrys */ -static ulong next_id = 1; /* next info id */ -static struct deflect_struc *table_head = NULL; -static struct deflect_struc *table_tail = NULL; -static unsigned char extern_wait_max = 4; /* maximum wait in s for external process */ - -DEFINE_SPINLOCK(divert_lock); - -/***************************/ -/* timer callback function */ -/***************************/ -static void deflect_timer_expire(struct timer_list *t) -{ - unsigned long flags; - struct call_struc *cs = from_timer(cs, t, timer); - - spin_lock_irqsave(&divert_lock, flags); - del_timer(&cs->timer); /* delete active timer */ - spin_unlock_irqrestore(&divert_lock, flags); - - switch (cs->akt_state) { - case DEFLECT_PROCEED: - cs->ics.command = ISDN_CMD_HANGUP; /* cancel action */ - divert_if.ll_cmd(&cs->ics); - spin_lock_irqsave(&divert_lock, flags); - cs->akt_state = DEFLECT_AUTODEL; /* delete after timeout */ - cs->timer.expires = jiffies + (HZ * AUTODEL_TIME); - add_timer(&cs->timer); - spin_unlock_irqrestore(&divert_lock, flags); - break; - - case DEFLECT_ALERT: - cs->ics.command = ISDN_CMD_REDIR; /* protocol */ - strlcpy(cs->ics.parm.setup.phone, cs->deflect_dest, sizeof(cs->ics.parm.setup.phone)); - strcpy(cs->ics.parm.setup.eazmsn, "Testtext delayed"); - divert_if.ll_cmd(&cs->ics); - spin_lock_irqsave(&divert_lock, flags); - cs->akt_state = DEFLECT_AUTODEL; /* delete after timeout */ - cs->timer.expires = jiffies + (HZ * AUTODEL_TIME); - add_timer(&cs->timer); - spin_unlock_irqrestore(&divert_lock, flags); - break; - - case DEFLECT_AUTODEL: - default: - spin_lock_irqsave(&divert_lock, flags); - if (cs->prev) - cs->prev->next = cs->next; /* forward link */ - else - divert_head = cs->next; - if (cs->next) - cs->next->prev = cs->prev; /* back link */ - spin_unlock_irqrestore(&divert_lock, flags); - kfree(cs); - return; - - } /* switch */ -} /* deflect_timer_func */ - - -/*****************************************/ -/* handle call forwarding de/activations */ -/* 0 = deact, 1 = act, 2 = interrogate */ -/*****************************************/ -int cf_command(int drvid, int mode, - u_char proc, char *msn, - u_char service, char *fwd_nr, ulong *procid) -{ - unsigned long flags; - int retval, msnlen; - int fwd_len; - char *p, *ielenp, tmp[60]; - struct call_struc *cs; - - if (strchr(msn, '.')) return (-EINVAL); /* subaddress not allowed in msn */ - if ((proc & 0x7F) > 2) return (-EINVAL); - proc &= 3; - p = tmp; - *p++ = 0x30; /* enumeration */ - ielenp = p++; /* remember total length position */ - *p++ = 0xa; /* proc tag */ - *p++ = 1; /* length */ - *p++ = proc & 0x7F; /* procedure to de/activate/interrogate */ - *p++ = 0xa; /* service tag */ - *p++ = 1; /* length */ - *p++ = service; /* service to handle */ - - if (mode == 1) { - if (!*fwd_nr) return (-EINVAL); /* destination missing */ - if (strchr(fwd_nr, '.')) return (-EINVAL); /* subaddress not allowed */ - fwd_len = strlen(fwd_nr); - *p++ = 0x30; /* number enumeration */ - *p++ = fwd_len + 2; /* complete forward to len */ - *p++ = 0x80; /* fwd to nr */ - *p++ = fwd_len; /* length of number */ - strcpy(p, fwd_nr); /* copy number */ - p += fwd_len; /* pointer beyond fwd */ - } /* activate */ - - msnlen = strlen(msn); - *p++ = 0x80; /* msn number */ - if (msnlen > 1) { - *p++ = msnlen; /* length */ - strcpy(p, msn); - p += msnlen; - } else - *p++ = 0; - - *ielenp = p - ielenp - 1; /* set total IE length */ - - /* allocate mem for information struct */ - if (!(cs = kmalloc(sizeof(struct call_struc), GFP_ATOMIC))) - return (-ENOMEM); /* no memory */ - timer_setup(&cs->timer, deflect_timer_expire, 0); - cs->info[0] = '\0'; - cs->ics.driver = drvid; - cs->ics.command = ISDN_CMD_PROT_IO; /* protocol specific io */ - cs->ics.arg = DSS1_CMD_INVOKE; /* invoke supplementary service */ - cs->ics.parm.dss1_io.proc = (mode == 1) ? 7 : (mode == 2) ? 11 : 8; /* operation */ - cs->ics.parm.dss1_io.timeout = 4000; /* from ETS 300 207-1 */ - cs->ics.parm.dss1_io.datalen = p - tmp; /* total len */ - cs->ics.parm.dss1_io.data = tmp; /* start of buffer */ - - spin_lock_irqsave(&divert_lock, flags); - cs->ics.parm.dss1_io.ll_id = next_id++; /* id for callback */ - spin_unlock_irqrestore(&divert_lock, flags); - *procid = cs->ics.parm.dss1_io.ll_id; - - sprintf(cs->info, "%d 0x%lx %s%s 0 %s %02x %d%s%s\n", - (!mode) ? DIVERT_DEACTIVATE : (mode == 1) ? DIVERT_ACTIVATE : DIVERT_REPORT, - cs->ics.parm.dss1_io.ll_id, - (mode != 2) ? "" : "0 ", - divert_if.drv_to_name(cs->ics.driver), - msn, - service & 0xFF, - proc, - (mode != 1) ? "" : " 0 ", - (mode != 1) ? "" : fwd_nr); - - retval = divert_if.ll_cmd(&cs->ics); /* execute command */ - - if (!retval) { - cs->prev = NULL; - spin_lock_irqsave(&divert_lock, flags); - cs->next = divert_head; - divert_head = cs; - spin_unlock_irqrestore(&divert_lock, flags); - } else - kfree(cs); - return (retval); -} /* cf_command */ - - -/****************************************/ -/* handle a external deflection command */ -/****************************************/ -int deflect_extern_action(u_char cmd, ulong callid, char *to_nr) -{ - struct call_struc *cs; - isdn_ctrl ic; - unsigned long flags; - int i; - - if ((cmd & 0x7F) > 2) return (-EINVAL); /* invalid command */ - cs = divert_head; /* start of parameter list */ - while (cs) { - if (cs->divert_id == callid) break; /* found */ - cs = cs->next; - } /* search entry */ - if (!cs) return (-EINVAL); /* invalid callid */ - - ic.driver = cs->ics.driver; - ic.arg = cs->ics.arg; - i = -EINVAL; - if (cs->akt_state == DEFLECT_AUTODEL) return (i); /* no valid call */ - switch (cmd & 0x7F) { - case 0: /* hangup */ - del_timer(&cs->timer); - ic.command = ISDN_CMD_HANGUP; - i = divert_if.ll_cmd(&ic); - spin_lock_irqsave(&divert_lock, flags); - cs->akt_state = DEFLECT_AUTODEL; /* delete after timeout */ - cs->timer.expires = jiffies + (HZ * AUTODEL_TIME); - add_timer(&cs->timer); - spin_unlock_irqrestore(&divert_lock, flags); - break; - - case 1: /* alert */ - if (cs->akt_state == DEFLECT_ALERT) return (0); - cmd &= 0x7F; /* never wait */ - del_timer(&cs->timer); - ic.command = ISDN_CMD_ALERT; - if ((i = divert_if.ll_cmd(&ic))) { - spin_lock_irqsave(&divert_lock, flags); - cs->akt_state = DEFLECT_AUTODEL; /* delete after timeout */ - cs->timer.expires = jiffies + (HZ * AUTODEL_TIME); - add_timer(&cs->timer); - spin_unlock_irqrestore(&divert_lock, flags); - } else - cs->akt_state = DEFLECT_ALERT; - break; - - case 2: /* redir */ - del_timer(&cs->timer); - strlcpy(cs->ics.parm.setup.phone, to_nr, sizeof(cs->ics.parm.setup.phone)); - strcpy(cs->ics.parm.setup.eazmsn, "Testtext manual"); - ic.command = ISDN_CMD_REDIR; - if ((i = divert_if.ll_cmd(&ic))) { - spin_lock_irqsave(&divert_lock, flags); - cs->akt_state = DEFLECT_AUTODEL; /* delete after timeout */ - cs->timer.expires = jiffies + (HZ * AUTODEL_TIME); - add_timer(&cs->timer); - spin_unlock_irqrestore(&divert_lock, flags); - } else - cs->akt_state = DEFLECT_ALERT; - break; - - } /* switch */ - return (i); -} /* deflect_extern_action */ - -/********************************/ -/* insert a new rule before idx */ -/********************************/ -int insertrule(int idx, divert_rule *newrule) -{ - struct deflect_struc *ds, *ds1 = NULL; - unsigned long flags; - - if (!(ds = kmalloc(sizeof(struct deflect_struc), GFP_KERNEL))) - return (-ENOMEM); /* no memory */ - - ds->rule = *newrule; /* set rule */ - - spin_lock_irqsave(&divert_lock, flags); - - if (idx >= 0) { - ds1 = table_head; - while ((ds1) && (idx > 0)) - { idx--; - ds1 = ds1->next; - } - if (!ds1) idx = -1; - } - - if (idx < 0) { - ds->prev = table_tail; /* previous entry */ - ds->next = NULL; /* end of chain */ - if (ds->prev) - ds->prev->next = ds; /* last forward */ - else - table_head = ds; /* is first entry */ - table_tail = ds; /* end of queue */ - } else { - ds->next = ds1; /* next entry */ - ds->prev = ds1->prev; /* prev entry */ - ds1->prev = ds; /* backward chain old element */ - if (!ds->prev) - table_head = ds; /* first element */ - } - - spin_unlock_irqrestore(&divert_lock, flags); - return (0); -} /* insertrule */ - -/***********************************/ -/* delete the rule at position idx */ -/***********************************/ -int deleterule(int idx) -{ - struct deflect_struc *ds, *ds1; - unsigned long flags; - - if (idx < 0) { - spin_lock_irqsave(&divert_lock, flags); - ds = table_head; - table_head = NULL; - table_tail = NULL; - spin_unlock_irqrestore(&divert_lock, flags); - while (ds) { - ds1 = ds; - ds = ds->next; - kfree(ds1); - } - return (0); - } - - spin_lock_irqsave(&divert_lock, flags); - ds = table_head; - - while ((ds) && (idx > 0)) { - idx--; - ds = ds->next; - } - - if (!ds) { - spin_unlock_irqrestore(&divert_lock, flags); - return (-EINVAL); - } - - if (ds->next) - ds->next->prev = ds->prev; /* backward chain */ - else - table_tail = ds->prev; /* end of chain */ - - if (ds->prev) - ds->prev->next = ds->next; /* forward chain */ - else - table_head = ds->next; /* start of chain */ - - spin_unlock_irqrestore(&divert_lock, flags); - kfree(ds); - return (0); -} /* deleterule */ - -/*******************************************/ -/* get a pointer to a specific rule number */ -/*******************************************/ -divert_rule *getruleptr(int idx) -{ - struct deflect_struc *ds = table_head; - - if (idx < 0) return (NULL); - while ((ds) && (idx >= 0)) { - if (!(idx--)) { - return (&ds->rule); - break; - } - ds = ds->next; - } - return (NULL); -} /* getruleptr */ - -/*************************************************/ -/* called from common module on an incoming call */ -/*************************************************/ -static int isdn_divert_icall(isdn_ctrl *ic) -{ - int retval = 0; - unsigned long flags; - struct call_struc *cs = NULL; - struct deflect_struc *dv; - char *p, *p1; - u_char accept; - - /* first check the internal deflection table */ - for (dv = table_head; dv; dv = dv->next) { - /* scan table */ - if (((dv->rule.callopt == 1) && (ic->command == ISDN_STAT_ICALLW)) || - ((dv->rule.callopt == 2) && (ic->command == ISDN_STAT_ICALL))) - continue; /* call option check */ - if (!(dv->rule.drvid & (1L << ic->driver))) - continue; /* driver not matching */ - if ((dv->rule.si1) && (dv->rule.si1 != ic->parm.setup.si1)) - continue; /* si1 not matching */ - if ((dv->rule.si2) && (dv->rule.si2 != ic->parm.setup.si2)) - continue; /* si2 not matching */ - - p = dv->rule.my_msn; - p1 = ic->parm.setup.eazmsn; - accept = 0; - while (*p) { - /* complete compare */ - if (*p == '-') { - accept = 1; /* call accepted */ - break; - } - if (*p++ != *p1++) - break; /* not accepted */ - if ((!*p) && (!*p1)) - accept = 1; - } /* complete compare */ - if (!accept) continue; /* not accepted */ - - if ((strcmp(dv->rule.caller, "0")) || - (ic->parm.setup.phone[0])) { - p = dv->rule.caller; - p1 = ic->parm.setup.phone; - accept = 0; - while (*p) { - /* complete compare */ - if (*p == '-') { - accept = 1; /* call accepted */ - break; - } - if (*p++ != *p1++) - break; /* not accepted */ - if ((!*p) && (!*p1)) - accept = 1; - } /* complete compare */ - if (!accept) continue; /* not accepted */ - } - - switch (dv->rule.action) { - case DEFLECT_IGNORE: - return 0; - - case DEFLECT_ALERT: - case DEFLECT_PROCEED: - case DEFLECT_REPORT: - case DEFLECT_REJECT: - if (dv->rule.action == DEFLECT_PROCEED) - if ((!if_used) || ((!extern_wait_max) && (!dv->rule.waittime))) - return (0); /* no external deflection needed */ - if (!(cs = kmalloc(sizeof(struct call_struc), GFP_ATOMIC))) - return (0); /* no memory */ - timer_setup(&cs->timer, deflect_timer_expire, 0); - cs->info[0] = '\0'; - - cs->ics = *ic; /* copy incoming data */ - if (!cs->ics.parm.setup.phone[0]) strcpy(cs->ics.parm.setup.phone, "0"); - if (!cs->ics.parm.setup.eazmsn[0]) strcpy(cs->ics.parm.setup.eazmsn, "0"); - cs->ics.parm.setup.screen = dv->rule.screen; - if (dv->rule.waittime) - cs->timer.expires = jiffies + (HZ * dv->rule.waittime); - else if (dv->rule.action == DEFLECT_PROCEED) - cs->timer.expires = jiffies + (HZ * extern_wait_max); - else - cs->timer.expires = 0; - cs->akt_state = dv->rule.action; - spin_lock_irqsave(&divert_lock, flags); - cs->divert_id = next_id++; /* new sequence number */ - spin_unlock_irqrestore(&divert_lock, flags); - cs->prev = NULL; - if (cs->akt_state == DEFLECT_ALERT) { - strcpy(cs->deflect_dest, dv->rule.to_nr); - if (!cs->timer.expires) { - strcpy(ic->parm.setup.eazmsn, - "Testtext direct"); - ic->parm.setup.screen = dv->rule.screen; - strlcpy(ic->parm.setup.phone, dv->rule.to_nr, sizeof(ic->parm.setup.phone)); - cs->akt_state = DEFLECT_AUTODEL; /* delete after timeout */ - cs->timer.expires = jiffies + (HZ * AUTODEL_TIME); - retval = 5; - } else - retval = 1; /* alerting */ - } else { - cs->deflect_dest[0] = '\0'; - retval = 4; /* only proceed */ - } - snprintf(cs->info, sizeof(cs->info), - "%d 0x%lx %s %s %s %s 0x%x 0x%x %d %d %s\n", - cs->akt_state, - cs->divert_id, - divert_if.drv_to_name(cs->ics.driver), - (ic->command == ISDN_STAT_ICALLW) ? "1" : "0", - cs->ics.parm.setup.phone, - cs->ics.parm.setup.eazmsn, - cs->ics.parm.setup.si1, - cs->ics.parm.setup.si2, - cs->ics.parm.setup.screen, - dv->rule.waittime, - cs->deflect_dest); - if ((dv->rule.action == DEFLECT_REPORT) || - (dv->rule.action == DEFLECT_REJECT)) { - put_info_buffer(cs->info); - kfree(cs); /* remove */ - return ((dv->rule.action == DEFLECT_REPORT) ? 0 : 2); /* nothing to do */ - } - break; - - default: - return 0; /* ignore call */ - } /* switch action */ - break; /* will break the 'for' looping */ - } /* scan_table */ - - if (cs) { - cs->prev = NULL; - spin_lock_irqsave(&divert_lock, flags); - cs->next = divert_head; - divert_head = cs; - if (cs->timer.expires) add_timer(&cs->timer); - spin_unlock_irqrestore(&divert_lock, flags); - - put_info_buffer(cs->info); - return (retval); - } else - return (0); -} /* isdn_divert_icall */ - - -void deleteprocs(void) -{ - struct call_struc *cs, *cs1; - unsigned long flags; - - spin_lock_irqsave(&divert_lock, flags); - cs = divert_head; - divert_head = NULL; - while (cs) { - del_timer(&cs->timer); - cs1 = cs; - cs = cs->next; - kfree(cs1); - } - spin_unlock_irqrestore(&divert_lock, flags); -} /* deleteprocs */ - -/****************************************************/ -/* put a address including address type into buffer */ -/****************************************************/ -static int put_address(char *st, u_char *p, int len) -{ - u_char retval = 0; - u_char adr_typ = 0; /* network standard */ - - if (len < 2) return (retval); - if (*p == 0xA1) { - retval = *(++p) + 2; /* total length */ - if (retval > len) return (0); /* too short */ - len = retval - 2; /* remaining length */ - if (len < 3) return (0); - if ((*(++p) != 0x0A) || (*(++p) != 1)) return (0); - adr_typ = *(++p); - len -= 3; - p++; - if (len < 2) return (0); - if (*p++ != 0x12) return (0); - if (*p > len) return (0); /* check number length */ - len = *p++; - } else if (*p == 0x80) { - retval = *(++p) + 2; /* total length */ - if (retval > len) return (0); - len = retval - 2; - p++; - } else - return (0); /* invalid address information */ - - sprintf(st, "%d ", adr_typ); - st += strlen(st); - if (!len) - *st++ = '-'; - else - while (len--) - *st++ = *p++; - *st = '\0'; - return (retval); -} /* put_address */ - -/*************************************/ -/* report a successful interrogation */ -/*************************************/ -static int interrogate_success(isdn_ctrl *ic, struct call_struc *cs) -{ - char *src = ic->parm.dss1_io.data; - int restlen = ic->parm.dss1_io.datalen; - int cnt = 1; - u_char n, n1; - char st[90], *p, *stp; - - if (restlen < 2) return (-100); /* frame too short */ - if (*src++ != 0x30) return (-101); - if ((n = *src++) > 0x81) return (-102); /* invalid length field */ - restlen -= 2; /* remaining bytes */ - if (n == 0x80) { - if (restlen < 2) return (-103); - if ((*(src + restlen - 1)) || (*(src + restlen - 2))) return (-104); - restlen -= 2; - } else if (n == 0x81) { - n = *src++; - restlen--; - if (n > restlen) return (-105); - restlen = n; - } else if (n > restlen) - return (-106); - else - restlen = n; /* standard format */ - if (restlen < 3) return (-107); /* no procedure */ - if ((*src++ != 2) || (*src++ != 1) || (*src++ != 0x0B)) return (-108); - restlen -= 3; - if (restlen < 2) return (-109); /* list missing */ - if (*src == 0x31) { - src++; - if ((n = *src++) > 0x81) return (-110); /* invalid length field */ - restlen -= 2; /* remaining bytes */ - if (n == 0x80) { - if (restlen < 2) return (-111); - if ((*(src + restlen - 1)) || (*(src + restlen - 2))) return (-112); - restlen -= 2; - } else if (n == 0x81) { - n = *src++; - restlen--; - if (n > restlen) return (-113); - restlen = n; - } else if (n > restlen) - return (-114); - else - restlen = n; /* standard format */ - } /* result list header */ - - while (restlen >= 2) { - stp = st; - sprintf(stp, "%d 0x%lx %d %s ", DIVERT_REPORT, ic->parm.dss1_io.ll_id, - cnt++, divert_if.drv_to_name(ic->driver)); - stp += strlen(stp); - if (*src++ != 0x30) return (-115); /* invalid enum */ - n = *src++; - restlen -= 2; - if (n > restlen) return (-116); /* enum length wrong */ - restlen -= n; - p = src; /* one entry */ - src += n; - if (!(n1 = put_address(stp, p, n & 0xFF))) continue; - stp += strlen(stp); - p += n1; - n -= n1; - if (n < 6) continue; /* no service and proc */ - if ((*p++ != 0x0A) || (*p++ != 1)) continue; - sprintf(stp, " 0x%02x ", (*p++) & 0xFF); - stp += strlen(stp); - if ((*p++ != 0x0A) || (*p++ != 1)) continue; - sprintf(stp, "%d ", (*p++) & 0xFF); - stp += strlen(stp); - n -= 6; - if (n > 2) { - if (*p++ != 0x30) continue; - if (*p > (n - 2)) continue; - n = *p++; - if (!(n1 = put_address(stp, p, n & 0xFF))) continue; - stp += strlen(stp); - } - sprintf(stp, "\n"); - put_info_buffer(st); - } /* while restlen */ - if (restlen) return (-117); - return (0); -} /* interrogate_success */ - -/*********************************************/ -/* callback for protocol specific extensions */ -/*********************************************/ -static int prot_stat_callback(isdn_ctrl *ic) -{ - struct call_struc *cs, *cs1; - int i; - unsigned long flags; - - cs = divert_head; /* start of list */ - cs1 = NULL; - while (cs) { - if (ic->driver == cs->ics.driver) { - switch (cs->ics.arg) { - case DSS1_CMD_INVOKE: - if ((cs->ics.parm.dss1_io.ll_id == ic->parm.dss1_io.ll_id) && - (cs->ics.parm.dss1_io.hl_id == ic->parm.dss1_io.hl_id)) { - switch (ic->arg) { - case DSS1_STAT_INVOKE_ERR: - sprintf(cs->info, "128 0x%lx 0x%x\n", - ic->parm.dss1_io.ll_id, - ic->parm.dss1_io.timeout); - put_info_buffer(cs->info); - break; - - case DSS1_STAT_INVOKE_RES: - switch (cs->ics.parm.dss1_io.proc) { - case 7: - case 8: - put_info_buffer(cs->info); - break; - - case 11: - i = interrogate_success(ic, cs); - if (i) - sprintf(cs->info, "%d 0x%lx %d\n", DIVERT_REPORT, - ic->parm.dss1_io.ll_id, i); - put_info_buffer(cs->info); - break; - - default: - printk(KERN_WARNING "dss1_divert: unknown proc %d\n", cs->ics.parm.dss1_io.proc); - break; - } - - break; - - default: - printk(KERN_WARNING "dss1_divert unknown invoke answer %lx\n", ic->arg); - break; - } - cs1 = cs; /* remember structure */ - cs = NULL; - continue; /* abort search */ - } /* id found */ - break; - - case DSS1_CMD_INVOKE_ABORT: - printk(KERN_WARNING "dss1_divert unhandled invoke abort\n"); - break; - - default: - printk(KERN_WARNING "dss1_divert unknown cmd 0x%lx\n", cs->ics.arg); - break; - } /* switch ics.arg */ - cs = cs->next; - } /* driver ok */ - } - - if (!cs1) { - printk(KERN_WARNING "dss1_divert unhandled process\n"); - return (0); - } - - if (cs1->ics.driver == -1) { - spin_lock_irqsave(&divert_lock, flags); - del_timer(&cs1->timer); - if (cs1->prev) - cs1->prev->next = cs1->next; /* forward link */ - else - divert_head = cs1->next; - if (cs1->next) - cs1->next->prev = cs1->prev; /* back link */ - spin_unlock_irqrestore(&divert_lock, flags); - kfree(cs1); - } - - return (0); -} /* prot_stat_callback */ - - -/***************************/ -/* status callback from HL */ -/***************************/ -static int isdn_divert_stat_callback(isdn_ctrl *ic) -{ - struct call_struc *cs, *cs1; - unsigned long flags; - int retval; - - retval = -1; - cs = divert_head; /* start of list */ - while (cs) { - if ((ic->driver == cs->ics.driver) && - (ic->arg == cs->ics.arg)) { - switch (ic->command) { - case ISDN_STAT_DHUP: - sprintf(cs->info, "129 0x%lx\n", cs->divert_id); - del_timer(&cs->timer); - cs->ics.driver = -1; - break; - - case ISDN_STAT_CAUSE: - sprintf(cs->info, "130 0x%lx %s\n", cs->divert_id, ic->parm.num); - break; - - case ISDN_STAT_REDIR: - sprintf(cs->info, "131 0x%lx\n", cs->divert_id); - del_timer(&cs->timer); - cs->ics.driver = -1; - break; - - default: - sprintf(cs->info, "999 0x%lx 0x%x\n", cs->divert_id, (int)(ic->command)); - break; - } - put_info_buffer(cs->info); - retval = 0; - } - cs1 = cs; - cs = cs->next; - if (cs1->ics.driver == -1) { - spin_lock_irqsave(&divert_lock, flags); - if (cs1->prev) - cs1->prev->next = cs1->next; /* forward link */ - else - divert_head = cs1->next; - if (cs1->next) - cs1->next->prev = cs1->prev; /* back link */ - spin_unlock_irqrestore(&divert_lock, flags); - kfree(cs1); - } - } - return (retval); /* not found */ -} /* isdn_divert_stat_callback */ - - -/********************/ -/* callback from ll */ -/********************/ -int ll_callback(isdn_ctrl *ic) -{ - switch (ic->command) { - case ISDN_STAT_ICALL: - case ISDN_STAT_ICALLW: - return (isdn_divert_icall(ic)); - break; - - case ISDN_STAT_PROT: - if ((ic->arg & 0xFF) == ISDN_PTYPE_EURO) { - if (ic->arg != DSS1_STAT_INVOKE_BRD) - return (prot_stat_callback(ic)); - else - return (0); /* DSS1 invoke broadcast */ - } else - return (-1); /* protocol not euro */ - - default: - return (isdn_divert_stat_callback(ic)); - } -} /* ll_callback */ diff --git a/drivers/isdn/divert/isdn_divert.h b/drivers/isdn/divert/isdn_divert.h deleted file mode 100644 index 55033dd872c0..000000000000 --- a/drivers/isdn/divert/isdn_divert.h +++ /dev/null @@ -1,132 +0,0 @@ -/* $Id: isdn_divert.h,v 1.5.6.1 2001/09/23 22:24:36 kai Exp $ - * - * Header for the diversion supplementary ioctl interface. - * - * Copyright 1998 by Werner Cornelius (werner@ikt.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#include -#include - -/******************************************/ -/* IOCTL codes for interface to user prog */ -/******************************************/ -#define DIVERT_IIOC_VERSION 0x01 /* actual version */ -#define IIOCGETVER _IO('I', 1) /* get version of interface */ -#define IIOCGETDRV _IO('I', 2) /* get driver number */ -#define IIOCGETNAM _IO('I', 3) /* get driver name */ -#define IIOCGETRULE _IO('I', 4) /* read one rule */ -#define IIOCMODRULE _IO('I', 5) /* modify/replace a rule */ -#define IIOCINSRULE _IO('I', 6) /* insert/append one rule */ -#define IIOCDELRULE _IO('I', 7) /* delete a rule */ -#define IIOCDODFACT _IO('I', 8) /* hangup/reject/alert/immediately deflect a call */ -#define IIOCDOCFACT _IO('I', 9) /* activate control forwarding in PBX */ -#define IIOCDOCFDIS _IO('I', 10) /* deactivate control forwarding in PBX */ -#define IIOCDOCFINT _IO('I', 11) /* interrogate control forwarding in PBX */ - -/*************************************/ -/* states reported through interface */ -/*************************************/ -#define DEFLECT_IGNORE 0 /* ignore incoming call */ -#define DEFLECT_REPORT 1 /* only report */ -#define DEFLECT_PROCEED 2 /* deflect when externally triggered */ -#define DEFLECT_ALERT 3 /* alert and deflect after delay */ -#define DEFLECT_REJECT 4 /* reject immediately */ -#define DIVERT_ACTIVATE 5 /* diversion activate */ -#define DIVERT_DEACTIVATE 6 /* diversion deactivate */ -#define DIVERT_REPORT 7 /* interrogation result */ -#define DEFLECT_AUTODEL 255 /* only for internal use */ - -#define DEFLECT_ALL_IDS 0xFFFFFFFF /* all drivers selected */ - -typedef struct { - ulong drvid; /* driver ids, bit mapped */ - char my_msn[35]; /* desired msn, subaddr allowed */ - char caller[35]; /* caller id, partial string with * + subaddr allowed */ - char to_nr[35]; /* deflected to number incl. subaddress */ - u_char si1, si2; /* service indicators, si1=bitmask, si1+2 0 = all */ - u_char screen; /* screening: 0 = no info, 1 = info, 2 = nfo with nr */ - u_char callopt; /* option for call handling: - 0 = all calls - 1 = only non waiting calls - 2 = only waiting calls */ - u_char action; /* desired action: - 0 = don't report call -> ignore - 1 = report call, do not allow/proceed for deflection - 2 = report call, send proceed, wait max waittime secs - 3 = report call, alert and deflect after waittime - 4 = report call, reject immediately - actions 1-2 only take place if interface is opened - */ - u_char waittime; /* maximum wait time for proceeding */ -} divert_rule; - -typedef union { - int drv_version; /* return of driver version */ - struct { - int drvid; /* id of driver */ - char drvnam[30]; /* name of driver */ - } getid; - struct { - int ruleidx; /* index of rule */ - divert_rule rule; /* rule parms */ - } getsetrule; - struct { - u_char subcmd; /* 0 = hangup/reject, - 1 = alert, - 2 = deflect */ - ulong callid; /* id of call delivered by ascii output */ - char to_nr[35]; /* destination when deflect, - else uus1 string (maxlen 31), - data from rule used if empty */ - } fwd_ctrl; - struct { - int drvid; /* id of driver */ - u_char cfproc; /* cfu = 0, cfb = 1, cfnr = 2 */ - ulong procid; /* process id returned when no error */ - u_char service; /* basically coded service, 0 = all */ - char msn[25]; /* desired msn, empty = all */ - char fwd_nr[35];/* forwarded to number + subaddress */ - } cf_ctrl; -} divert_ioctl; - -#ifdef __KERNEL__ - -#include -#include - -#define AUTODEL_TIME 30 /* timeout in s to delete internal entries */ - -/**************************************************/ -/* structure keeping ascii info for device output */ -/**************************************************/ -struct divert_info { - struct divert_info *next; - ulong usage_cnt; /* number of files still to work */ - char info_start[2]; /* info string start */ -}; - - -/**************/ -/* Prototypes */ -/**************/ -extern spinlock_t divert_lock; - -extern ulong if_used; /* number of interface users */ -extern int divert_dev_deinit(void); -extern int divert_dev_init(void); -extern void put_info_buffer(char *); -extern int ll_callback(isdn_ctrl *); -extern isdn_divert_if divert_if; -extern divert_rule *getruleptr(int); -extern int insertrule(int, divert_rule *); -extern int deleterule(int); -extern void deleteprocs(void); -extern int deflect_extern_action(u_char, ulong, char *); -extern int cf_command(int, int, u_char, char *, u_char, char *, ulong *); - -#endif /* __KERNEL__ */ diff --git a/drivers/isdn/i4l/Kconfig b/drivers/isdn/i4l/Kconfig deleted file mode 100644 index cacde8de38a3..000000000000 --- a/drivers/isdn/i4l/Kconfig +++ /dev/null @@ -1,127 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Old ISDN4Linux config -# - -if ISDN_I4L - -config ISDN_PPP - bool "Support synchronous PPP" - depends on INET - select SLHC - help - Over digital connections such as ISDN, there is no need to - synchronize sender and recipient's clocks with start and stop bits - as is done over analog telephone lines. Instead, one can use - "synchronous PPP". Saying Y here will include this protocol. This - protocol is used by Cisco and Sun for example. So you want to say Y - here if the other end of your ISDN connection supports it. You will - need a special version of pppd (called ipppd) for using this - feature. See and - for more information. - -config ISDN_PPP_VJ - bool "Use VJ-compression with synchronous PPP" - depends on ISDN_PPP - help - This enables Van Jacobson header compression for synchronous PPP. - Say Y if the other end of the connection supports it. - -config ISDN_MPP - bool "Support generic MP (RFC 1717)" - depends on ISDN_PPP - help - With synchronous PPP enabled, it is possible to increase throughput - by bundling several ISDN-connections, using this protocol. See - for more information. - -config IPPP_FILTER - bool "Filtering for synchronous PPP" - depends on ISDN_PPP - help - Say Y here if you want to be able to filter the packets passing over - IPPP interfaces. This allows you to control which packets count as - activity (i.e. which packets will reset the idle timer or bring up - a demand-dialled link) and which packets are to be dropped entirely. - You need to say Y here if you wish to use the pass-filter and - active-filter options to ipppd. - -config ISDN_PPP_BSDCOMP - tristate "Support BSD compression" - depends on ISDN_PPP - help - Support for the BSD-Compress compression method for PPP, which uses - the LZW compression method to compress each PPP packet before it is - sent over the wire. The machine at the other end of the PPP link - (usually your ISP) has to support the BSD-Compress compression - method as well for this to be useful. Even if they don't support it, - it is safe to say Y here. - -config ISDN_AUDIO - bool "Support audio via ISDN" - help - If you say Y here, the modem-emulator will support a subset of the - EIA Class 8 Voice commands. Using a getty with voice-support - (mgetty+sendfax by with an extension, available - with the ISDN utility package for example), you will be able to use - your Linux box as an ISDN-answering machine. Of course, this must be - supported by the lowlevel driver also. Currently, the HiSax driver - is the only voice-supporting driver. See - for more information. - -config ISDN_TTY_FAX - bool "Support AT-Fax Class 1 and 2 commands" - depends on ISDN_AUDIO - help - If you say Y here, the modem-emulator will support a subset of the - Fax Class 1 and 2 commands. Using a getty with fax-support - (mgetty+sendfax, hylafax), you will be able to use your Linux box as - an ISDN-fax-machine. This must be supported by the lowlevel driver - also. See for more information. - -config ISDN_X25 - bool "X.25 PLP on top of ISDN" - depends on X25 - help - This feature provides the X.25 protocol over ISDN connections. - See for more information - if you are thinking about using this. - - -menu "ISDN feature submodules" - -config ISDN_DRV_LOOP - tristate "isdnloop support" - depends on BROKEN_ON_SMP - help - This driver provides a virtual ISDN card. Its primary purpose is - testing of linklevel features or configuration without getting - charged by your service-provider for lots of phone calls. - You need will need the loopctrl utility from the latest isdn4k-utils - package to set up this driver. - -config ISDN_DIVERSION - tristate "Support isdn diversion services" - help - This option allows you to use some supplementary diversion - services in conjunction with the HiSax driver on an EURO/DSS1 - line. - - Supported options are CD (call deflection), CFU (Call forward - unconditional), CFB (Call forward when busy) and CFNR (call forward - not reachable). Additionally the actual CFU, CFB and CFNR state may - be interrogated. - - The use of CFU, CFB, CFNR and interrogation may be limited to some - countries. The keypad protocol is still not implemented. CD should - work in all countries if the service has been subscribed to. - - Please read the file . - -endmenu - -comment "ISDN4Linux hardware drivers" - -# end ISDN_I4L -endif - diff --git a/drivers/isdn/i4l/Makefile b/drivers/isdn/i4l/Makefile index be77500c9e86..11fe697739d5 100644 --- a/drivers/isdn/i4l/Makefile +++ b/drivers/isdn/i4l/Makefile @@ -3,18 +3,4 @@ # Each configuration option enables a list of files. -obj-$(CONFIG_ISDN_I4L) += isdn.o -obj-$(CONFIG_ISDN_PPP_BSDCOMP) += isdn_bsdcomp.o obj-$(CONFIG_ISDN_HDLC) += isdnhdlc.o - -# Multipart objects. - -isdn-y := isdn_net.o isdn_tty.o isdn_v110.o isdn_common.o - -# Optional parts of multipart objects. - -isdn-$(CONFIG_ISDN_PPP) += isdn_ppp.o -isdn-$(CONFIG_ISDN_X25) += isdn_concap.o isdn_x25iface.o -isdn-$(CONFIG_ISDN_AUDIO) += isdn_audio.o -isdn-$(CONFIG_ISDN_TTY_FAX) += isdn_ttyfax.o - diff --git a/drivers/isdn/i4l/isdn_audio.c b/drivers/isdn/i4l/isdn_audio.c deleted file mode 100644 index b6bcd1eca128..000000000000 --- a/drivers/isdn/i4l/isdn_audio.c +++ /dev/null @@ -1,711 +0,0 @@ -/* $Id: isdn_audio.c,v 1.1.2.2 2004/01/12 22:37:18 keil Exp $ - * - * Linux ISDN subsystem, audio conversion and compression (linklevel). - * - * Copyright 1994-1999 by Fritz Elfert (fritz@isdn4linux.de) - * DTMF code (c) 1996 by Christian Mock (cm@kukuruz.ping.at) - * Silence detection (c) 1998 by Armin Schindler (mac@gismo.telekom.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#include -#include -#include "isdn_audio.h" -#include "isdn_common.h" - -char *isdn_audio_revision = "$Revision: 1.1.2.2 $"; - -/* - * Misc. lookup-tables. - */ - -/* ulaw -> signed 16-bit */ -static short isdn_audio_ulaw_to_s16[] = -{ - 0x8284, 0x8684, 0x8a84, 0x8e84, 0x9284, 0x9684, 0x9a84, 0x9e84, - 0xa284, 0xa684, 0xaa84, 0xae84, 0xb284, 0xb684, 0xba84, 0xbe84, - 0xc184, 0xc384, 0xc584, 0xc784, 0xc984, 0xcb84, 0xcd84, 0xcf84, - 0xd184, 0xd384, 0xd584, 0xd784, 0xd984, 0xdb84, 0xdd84, 0xdf84, - 0xe104, 0xe204, 0xe304, 0xe404, 0xe504, 0xe604, 0xe704, 0xe804, - 0xe904, 0xea04, 0xeb04, 0xec04, 0xed04, 0xee04, 0xef04, 0xf004, - 0xf0c4, 0xf144, 0xf1c4, 0xf244, 0xf2c4, 0xf344, 0xf3c4, 0xf444, - 0xf4c4, 0xf544, 0xf5c4, 0xf644, 0xf6c4, 0xf744, 0xf7c4, 0xf844, - 0xf8a4, 0xf8e4, 0xf924, 0xf964, 0xf9a4, 0xf9e4, 0xfa24, 0xfa64, - 0xfaa4, 0xfae4, 0xfb24, 0xfb64, 0xfba4, 0xfbe4, 0xfc24, 0xfc64, - 0xfc94, 0xfcb4, 0xfcd4, 0xfcf4, 0xfd14, 0xfd34, 0xfd54, 0xfd74, - 0xfd94, 0xfdb4, 0xfdd4, 0xfdf4, 0xfe14, 0xfe34, 0xfe54, 0xfe74, - 0xfe8c, 0xfe9c, 0xfeac, 0xfebc, 0xfecc, 0xfedc, 0xfeec, 0xfefc, - 0xff0c, 0xff1c, 0xff2c, 0xff3c, 0xff4c, 0xff5c, 0xff6c, 0xff7c, - 0xff88, 0xff90, 0xff98, 0xffa0, 0xffa8, 0xffb0, 0xffb8, 0xffc0, - 0xffc8, 0xffd0, 0xffd8, 0xffe0, 0xffe8, 0xfff0, 0xfff8, 0x0000, - 0x7d7c, 0x797c, 0x757c, 0x717c, 0x6d7c, 0x697c, 0x657c, 0x617c, - 0x5d7c, 0x597c, 0x557c, 0x517c, 0x4d7c, 0x497c, 0x457c, 0x417c, - 0x3e7c, 0x3c7c, 0x3a7c, 0x387c, 0x367c, 0x347c, 0x327c, 0x307c, - 0x2e7c, 0x2c7c, 0x2a7c, 0x287c, 0x267c, 0x247c, 0x227c, 0x207c, - 0x1efc, 0x1dfc, 0x1cfc, 0x1bfc, 0x1afc, 0x19fc, 0x18fc, 0x17fc, - 0x16fc, 0x15fc, 0x14fc, 0x13fc, 0x12fc, 0x11fc, 0x10fc, 0x0ffc, - 0x0f3c, 0x0ebc, 0x0e3c, 0x0dbc, 0x0d3c, 0x0cbc, 0x0c3c, 0x0bbc, - 0x0b3c, 0x0abc, 0x0a3c, 0x09bc, 0x093c, 0x08bc, 0x083c, 0x07bc, - 0x075c, 0x071c, 0x06dc, 0x069c, 0x065c, 0x061c, 0x05dc, 0x059c, - 0x055c, 0x051c, 0x04dc, 0x049c, 0x045c, 0x041c, 0x03dc, 0x039c, - 0x036c, 0x034c, 0x032c, 0x030c, 0x02ec, 0x02cc, 0x02ac, 0x028c, - 0x026c, 0x024c, 0x022c, 0x020c, 0x01ec, 0x01cc, 0x01ac, 0x018c, - 0x0174, 0x0164, 0x0154, 0x0144, 0x0134, 0x0124, 0x0114, 0x0104, - 0x00f4, 0x00e4, 0x00d4, 0x00c4, 0x00b4, 0x00a4, 0x0094, 0x0084, - 0x0078, 0x0070, 0x0068, 0x0060, 0x0058, 0x0050, 0x0048, 0x0040, - 0x0038, 0x0030, 0x0028, 0x0020, 0x0018, 0x0010, 0x0008, 0x0000 -}; - -/* alaw -> signed 16-bit */ -static short isdn_audio_alaw_to_s16[] = -{ - 0x13fc, 0xec04, 0x0144, 0xfebc, 0x517c, 0xae84, 0x051c, 0xfae4, - 0x0a3c, 0xf5c4, 0x0048, 0xffb8, 0x287c, 0xd784, 0x028c, 0xfd74, - 0x1bfc, 0xe404, 0x01cc, 0xfe34, 0x717c, 0x8e84, 0x071c, 0xf8e4, - 0x0e3c, 0xf1c4, 0x00c4, 0xff3c, 0x387c, 0xc784, 0x039c, 0xfc64, - 0x0ffc, 0xf004, 0x0104, 0xfefc, 0x417c, 0xbe84, 0x041c, 0xfbe4, - 0x083c, 0xf7c4, 0x0008, 0xfff8, 0x207c, 0xdf84, 0x020c, 0xfdf4, - 0x17fc, 0xe804, 0x018c, 0xfe74, 0x617c, 0x9e84, 0x061c, 0xf9e4, - 0x0c3c, 0xf3c4, 0x0084, 0xff7c, 0x307c, 0xcf84, 0x030c, 0xfcf4, - 0x15fc, 0xea04, 0x0164, 0xfe9c, 0x597c, 0xa684, 0x059c, 0xfa64, - 0x0b3c, 0xf4c4, 0x0068, 0xff98, 0x2c7c, 0xd384, 0x02cc, 0xfd34, - 0x1dfc, 0xe204, 0x01ec, 0xfe14, 0x797c, 0x8684, 0x07bc, 0xf844, - 0x0f3c, 0xf0c4, 0x00e4, 0xff1c, 0x3c7c, 0xc384, 0x03dc, 0xfc24, - 0x11fc, 0xee04, 0x0124, 0xfedc, 0x497c, 0xb684, 0x049c, 0xfb64, - 0x093c, 0xf6c4, 0x0028, 0xffd8, 0x247c, 0xdb84, 0x024c, 0xfdb4, - 0x19fc, 0xe604, 0x01ac, 0xfe54, 0x697c, 0x9684, 0x069c, 0xf964, - 0x0d3c, 0xf2c4, 0x00a4, 0xff5c, 0x347c, 0xcb84, 0x034c, 0xfcb4, - 0x12fc, 0xed04, 0x0134, 0xfecc, 0x4d7c, 0xb284, 0x04dc, 0xfb24, - 0x09bc, 0xf644, 0x0038, 0xffc8, 0x267c, 0xd984, 0x026c, 0xfd94, - 0x1afc, 0xe504, 0x01ac, 0xfe54, 0x6d7c, 0x9284, 0x06dc, 0xf924, - 0x0dbc, 0xf244, 0x00b4, 0xff4c, 0x367c, 0xc984, 0x036c, 0xfc94, - 0x0f3c, 0xf0c4, 0x00f4, 0xff0c, 0x3e7c, 0xc184, 0x03dc, 0xfc24, - 0x07bc, 0xf844, 0x0008, 0xfff8, 0x1efc, 0xe104, 0x01ec, 0xfe14, - 0x16fc, 0xe904, 0x0174, 0xfe8c, 0x5d7c, 0xa284, 0x05dc, 0xfa24, - 0x0bbc, 0xf444, 0x0078, 0xff88, 0x2e7c, 0xd184, 0x02ec, 0xfd14, - 0x14fc, 0xeb04, 0x0154, 0xfeac, 0x557c, 0xaa84, 0x055c, 0xfaa4, - 0x0abc, 0xf544, 0x0058, 0xffa8, 0x2a7c, 0xd584, 0x02ac, 0xfd54, - 0x1cfc, 0xe304, 0x01cc, 0xfe34, 0x757c, 0x8a84, 0x075c, 0xf8a4, - 0x0ebc, 0xf144, 0x00d4, 0xff2c, 0x3a7c, 0xc584, 0x039c, 0xfc64, - 0x10fc, 0xef04, 0x0114, 0xfeec, 0x457c, 0xba84, 0x045c, 0xfba4, - 0x08bc, 0xf744, 0x0018, 0xffe8, 0x227c, 0xdd84, 0x022c, 0xfdd4, - 0x18fc, 0xe704, 0x018c, 0xfe74, 0x657c, 0x9a84, 0x065c, 0xf9a4, - 0x0cbc, 0xf344, 0x0094, 0xff6c, 0x327c, 0xcd84, 0x032c, 0xfcd4 -}; - -/* alaw -> ulaw */ -static char isdn_audio_alaw_to_ulaw[] = -{ - 0xab, 0x2b, 0xe3, 0x63, 0x8b, 0x0b, 0xc9, 0x49, - 0xba, 0x3a, 0xf6, 0x76, 0x9b, 0x1b, 0xd7, 0x57, - 0xa3, 0x23, 0xdd, 0x5d, 0x83, 0x03, 0xc1, 0x41, - 0xb2, 0x32, 0xeb, 0x6b, 0x93, 0x13, 0xcf, 0x4f, - 0xaf, 0x2f, 0xe7, 0x67, 0x8f, 0x0f, 0xcd, 0x4d, - 0xbe, 0x3e, 0xfe, 0x7e, 0x9f, 0x1f, 0xdb, 0x5b, - 0xa7, 0x27, 0xdf, 0x5f, 0x87, 0x07, 0xc5, 0x45, - 0xb6, 0x36, 0xef, 0x6f, 0x97, 0x17, 0xd3, 0x53, - 0xa9, 0x29, 0xe1, 0x61, 0x89, 0x09, 0xc7, 0x47, - 0xb8, 0x38, 0xf2, 0x72, 0x99, 0x19, 0xd5, 0x55, - 0xa1, 0x21, 0xdc, 0x5c, 0x81, 0x01, 0xbf, 0x3f, - 0xb0, 0x30, 0xe9, 0x69, 0x91, 0x11, 0xce, 0x4e, - 0xad, 0x2d, 0xe5, 0x65, 0x8d, 0x0d, 0xcb, 0x4b, - 0xbc, 0x3c, 0xfa, 0x7a, 0x9d, 0x1d, 0xd9, 0x59, - 0xa5, 0x25, 0xde, 0x5e, 0x85, 0x05, 0xc3, 0x43, - 0xb4, 0x34, 0xed, 0x6d, 0x95, 0x15, 0xd1, 0x51, - 0xac, 0x2c, 0xe4, 0x64, 0x8c, 0x0c, 0xca, 0x4a, - 0xbb, 0x3b, 0xf8, 0x78, 0x9c, 0x1c, 0xd8, 0x58, - 0xa4, 0x24, 0xde, 0x5e, 0x84, 0x04, 0xc2, 0x42, - 0xb3, 0x33, 0xec, 0x6c, 0x94, 0x14, 0xd0, 0x50, - 0xb0, 0x30, 0xe8, 0x68, 0x90, 0x10, 0xce, 0x4e, - 0xbf, 0x3f, 0xfe, 0x7e, 0xa0, 0x20, 0xdc, 0x5c, - 0xa8, 0x28, 0xe0, 0x60, 0x88, 0x08, 0xc6, 0x46, - 0xb7, 0x37, 0xf0, 0x70, 0x98, 0x18, 0xd4, 0x54, - 0xaa, 0x2a, 0xe2, 0x62, 0x8a, 0x0a, 0xc8, 0x48, - 0xb9, 0x39, 0xf4, 0x74, 0x9a, 0x1a, 0xd6, 0x56, - 0xa2, 0x22, 0xdd, 0x5d, 0x82, 0x02, 0xc0, 0x40, - 0xb1, 0x31, 0xea, 0x6a, 0x92, 0x12, 0xcf, 0x4f, - 0xae, 0x2e, 0xe6, 0x66, 0x8e, 0x0e, 0xcc, 0x4c, - 0xbd, 0x3d, 0xfc, 0x7c, 0x9e, 0x1e, 0xda, 0x5a, - 0xa6, 0x26, 0xdf, 0x5f, 0x86, 0x06, 0xc4, 0x44, - 0xb5, 0x35, 0xee, 0x6e, 0x96, 0x16, 0xd2, 0x52 -}; - -/* ulaw -> alaw */ -static char isdn_audio_ulaw_to_alaw[] = -{ - 0xab, 0x55, 0xd5, 0x15, 0x95, 0x75, 0xf5, 0x35, - 0xb5, 0x45, 0xc5, 0x05, 0x85, 0x65, 0xe5, 0x25, - 0xa5, 0x5d, 0xdd, 0x1d, 0x9d, 0x7d, 0xfd, 0x3d, - 0xbd, 0x4d, 0xcd, 0x0d, 0x8d, 0x6d, 0xed, 0x2d, - 0xad, 0x51, 0xd1, 0x11, 0x91, 0x71, 0xf1, 0x31, - 0xb1, 0x41, 0xc1, 0x01, 0x81, 0x61, 0xe1, 0x21, - 0x59, 0xd9, 0x19, 0x99, 0x79, 0xf9, 0x39, 0xb9, - 0x49, 0xc9, 0x09, 0x89, 0x69, 0xe9, 0x29, 0xa9, - 0xd7, 0x17, 0x97, 0x77, 0xf7, 0x37, 0xb7, 0x47, - 0xc7, 0x07, 0x87, 0x67, 0xe7, 0x27, 0xa7, 0xdf, - 0x9f, 0x7f, 0xff, 0x3f, 0xbf, 0x4f, 0xcf, 0x0f, - 0x8f, 0x6f, 0xef, 0x2f, 0x53, 0x13, 0x73, 0x33, - 0xb3, 0x43, 0xc3, 0x03, 0x83, 0x63, 0xe3, 0x23, - 0xa3, 0x5b, 0xdb, 0x1b, 0x9b, 0x7b, 0xfb, 0x3b, - 0xbb, 0xbb, 0x4b, 0x4b, 0xcb, 0xcb, 0x0b, 0x0b, - 0x8b, 0x8b, 0x6b, 0x6b, 0xeb, 0xeb, 0x2b, 0x2b, - 0xab, 0x54, 0xd4, 0x14, 0x94, 0x74, 0xf4, 0x34, - 0xb4, 0x44, 0xc4, 0x04, 0x84, 0x64, 0xe4, 0x24, - 0xa4, 0x5c, 0xdc, 0x1c, 0x9c, 0x7c, 0xfc, 0x3c, - 0xbc, 0x4c, 0xcc, 0x0c, 0x8c, 0x6c, 0xec, 0x2c, - 0xac, 0x50, 0xd0, 0x10, 0x90, 0x70, 0xf0, 0x30, - 0xb0, 0x40, 0xc0, 0x00, 0x80, 0x60, 0xe0, 0x20, - 0x58, 0xd8, 0x18, 0x98, 0x78, 0xf8, 0x38, 0xb8, - 0x48, 0xc8, 0x08, 0x88, 0x68, 0xe8, 0x28, 0xa8, - 0xd6, 0x16, 0x96, 0x76, 0xf6, 0x36, 0xb6, 0x46, - 0xc6, 0x06, 0x86, 0x66, 0xe6, 0x26, 0xa6, 0xde, - 0x9e, 0x7e, 0xfe, 0x3e, 0xbe, 0x4e, 0xce, 0x0e, - 0x8e, 0x6e, 0xee, 0x2e, 0x52, 0x12, 0x72, 0x32, - 0xb2, 0x42, 0xc2, 0x02, 0x82, 0x62, 0xe2, 0x22, - 0xa2, 0x5a, 0xda, 0x1a, 0x9a, 0x7a, 0xfa, 0x3a, - 0xba, 0xba, 0x4a, 0x4a, 0xca, 0xca, 0x0a, 0x0a, - 0x8a, 0x8a, 0x6a, 0x6a, 0xea, 0xea, 0x2a, 0x2a -}; - -#define NCOEFF 8 /* number of frequencies to be analyzed */ -#define DTMF_TRESH 4000 /* above this is dtmf */ -#define SILENCE_TRESH 200 /* below this is silence */ -#define AMP_BITS 9 /* bits per sample, reduced to avoid overflow */ -#define LOGRP 0 -#define HIGRP 1 - -/* For DTMF recognition: - * 2 * cos(2 * PI * k / N) precalculated for all k - */ -static int cos2pik[NCOEFF] = -{ - 55813, 53604, 51193, 48591, 38114, 33057, 25889, 18332 -}; - -static char dtmf_matrix[4][4] = -{ - {'1', '2', '3', 'A'}, - {'4', '5', '6', 'B'}, - {'7', '8', '9', 'C'}, - {'*', '0', '#', 'D'} -}; - -static inline void -isdn_audio_tlookup(const u_char *table, u_char *buff, unsigned long n) -{ -#ifdef __i386__ - unsigned long d0, d1, d2, d3; - __asm__ __volatile__( - "cld\n" - "1:\tlodsb\n\t" - "xlatb\n\t" - "stosb\n\t" - "loop 1b\n\t" - : "=&b"(d0), "=&c"(d1), "=&D"(d2), "=&S"(d3) - : "0"((long) table), "1"(n), "2"((long) buff), "3"((long) buff) - : "memory", "ax"); -#else - while (n--) - *buff = table[*(unsigned char *)buff], buff++; -#endif -} - -void -isdn_audio_ulaw2alaw(unsigned char *buff, unsigned long len) -{ - isdn_audio_tlookup(isdn_audio_ulaw_to_alaw, buff, len); -} - -void -isdn_audio_alaw2ulaw(unsigned char *buff, unsigned long len) -{ - isdn_audio_tlookup(isdn_audio_alaw_to_ulaw, buff, len); -} - -/* - * linear <-> adpcm conversion stuff - * Most parts from the mgetty-package. - * (C) by Gert Doering and Klaus Weidner - * Used by permission of Gert Doering - */ - - -#define ZEROTRAP /* turn on the trap as per the MIL-STD */ -#undef ZEROTRAP -#define BIAS 0x84 /* define the add-in bias for 16 bit samples */ -#define CLIP 32635 - -static unsigned char -isdn_audio_linear2ulaw(int sample) -{ - static int exp_lut[256] = - { - 0, 0, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3, - 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, - 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, - 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, - 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, - 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, - 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, - 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, - 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 - }; - int sign, - exponent, - mantissa; - unsigned char ulawbyte; - - /* Get the sample into sign-magnitude. */ - sign = (sample >> 8) & 0x80; /* set aside the sign */ - if (sign != 0) - sample = -sample; /* get magnitude */ - if (sample > CLIP) - sample = CLIP; /* clip the magnitude */ - - /* Convert from 16 bit linear to ulaw. */ - sample = sample + BIAS; - exponent = exp_lut[(sample >> 7) & 0xFF]; - mantissa = (sample >> (exponent + 3)) & 0x0F; - ulawbyte = ~(sign | (exponent << 4) | mantissa); -#ifdef ZEROTRAP - /* optional CCITT trap */ - if (ulawbyte == 0) - ulawbyte = 0x02; -#endif - return (ulawbyte); -} - - -static int Mx[3][8] = -{ - {0x3800, 0x5600, 0, 0, 0, 0, 0, 0}, - {0x399a, 0x3a9f, 0x4d14, 0x6607, 0, 0, 0, 0}, - {0x3556, 0x3556, 0x399A, 0x3A9F, 0x4200, 0x4D14, 0x6607, 0x6607}, -}; - -static int bitmask[9] = -{ - 0, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff -}; - -static int -isdn_audio_get_bits(adpcm_state *s, unsigned char **in, int *len) -{ - while (s->nleft < s->nbits) { - int d = *((*in)++); - (*len)--; - s->word = (s->word << 8) | d; - s->nleft += 8; - } - s->nleft -= s->nbits; - return (s->word >> s->nleft) & bitmask[s->nbits]; -} - -static void -isdn_audio_put_bits(int data, int nbits, adpcm_state *s, - unsigned char **out, int *len) -{ - s->word = (s->word << nbits) | (data & bitmask[nbits]); - s->nleft += nbits; - while (s->nleft >= 8) { - int d = (s->word >> (s->nleft - 8)); - *(out[0]++) = d & 255; - (*len)++; - s->nleft -= 8; - } -} - -adpcm_state * -isdn_audio_adpcm_init(adpcm_state *s, int nbits) -{ - if (!s) - s = kmalloc(sizeof(adpcm_state), GFP_ATOMIC); - if (s) { - s->a = 0; - s->d = 5; - s->word = 0; - s->nleft = 0; - s->nbits = nbits; - } - return s; -} - -dtmf_state * -isdn_audio_dtmf_init(dtmf_state *s) -{ - if (!s) - s = kmalloc(sizeof(dtmf_state), GFP_ATOMIC); - if (s) { - s->idx = 0; - s->last = ' '; - } - return s; -} - -/* - * Decompression of adpcm data to a/u-law - * - */ - -int -isdn_audio_adpcm2xlaw(adpcm_state *s, int fmt, unsigned char *in, - unsigned char *out, int len) -{ - int a = s->a; - int d = s->d; - int nbits = s->nbits; - int olen = 0; - - while (len) { - int e = isdn_audio_get_bits(s, &in, &len); - int sign; - - if (nbits == 4 && e == 0) - d = 4; - sign = (e >> (nbits - 1)) ? -1 : 1; - e &= bitmask[nbits - 1]; - a += sign * ((e << 1) + 1) * d >> 1; - if (d & 1) - a++; - if (fmt) - *out++ = isdn_audio_ulaw_to_alaw[ - isdn_audio_linear2ulaw(a << 2)]; - else - *out++ = isdn_audio_linear2ulaw(a << 2); - olen++; - d = (d * Mx[nbits - 2][e] + 0x2000) >> 14; - if (d < 5) - d = 5; - } - s->a = a; - s->d = d; - return olen; -} - -int -isdn_audio_xlaw2adpcm(adpcm_state *s, int fmt, unsigned char *in, - unsigned char *out, int len) -{ - int a = s->a; - int d = s->d; - int nbits = s->nbits; - int olen = 0; - - while (len--) { - int e = 0, - nmax = 1 << (nbits - 1); - int sign, - delta; - - if (fmt) - delta = (isdn_audio_alaw_to_s16[*in++] >> 2) - a; - else - delta = (isdn_audio_ulaw_to_s16[*in++] >> 2) - a; - if (delta < 0) { - e = nmax; - delta = -delta; - } - while (--nmax && delta > d) { - delta -= d; - e++; - } - if (nbits == 4 && ((e & 0x0f) == 0)) - e = 8; - isdn_audio_put_bits(e, nbits, s, &out, &olen); - sign = (e >> (nbits - 1)) ? -1 : 1; - e &= bitmask[nbits - 1]; - - a += sign * ((e << 1) + 1) * d >> 1; - if (d & 1) - a++; - d = (d * Mx[nbits - 2][e] + 0x2000) >> 14; - if (d < 5) - d = 5; - } - s->a = a; - s->d = d; - return olen; -} - -/* - * Goertzel algorithm. - * See http://ptolemy.eecs.berkeley.edu/papers/96/dtmf_ict/ - * for more info. - * Result is stored into an sk_buff and queued up for later - * evaluation. - */ -static void -isdn_audio_goertzel(int *sample, modem_info *info) -{ - int sk, - sk1, - sk2; - int k, - n; - struct sk_buff *skb; - int *result; - - skb = dev_alloc_skb(sizeof(int) * NCOEFF); - if (!skb) { - printk(KERN_WARNING - "isdn_audio: Could not alloc DTMF result for ttyI%d\n", - info->line); - return; - } - result = skb_put(skb, sizeof(int) * NCOEFF); - for (k = 0; k < NCOEFF; k++) { - sk = sk1 = sk2 = 0; - for (n = 0; n < DTMF_NPOINTS; n++) { - sk = sample[n] + ((cos2pik[k] * sk1) >> 15) - sk2; - sk2 = sk1; - sk1 = sk; - } - /* Avoid overflows */ - sk >>= 1; - sk2 >>= 1; - /* compute |X(k)|**2 */ - /* report overflows. This should not happen. */ - /* Comment this out if desired */ - if (sk < -32768 || sk > 32767) - printk(KERN_DEBUG - "isdn_audio: dtmf goertzel overflow, sk=%d\n", sk); - if (sk2 < -32768 || sk2 > 32767) - printk(KERN_DEBUG - "isdn_audio: dtmf goertzel overflow, sk2=%d\n", sk2); - result[k] = - ((sk * sk) >> AMP_BITS) - - ((((cos2pik[k] * sk) >> 15) * sk2) >> AMP_BITS) + - ((sk2 * sk2) >> AMP_BITS); - } - skb_queue_tail(&info->dtmf_queue, skb); - isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1); -} - -void -isdn_audio_eval_dtmf(modem_info *info) -{ - struct sk_buff *skb; - int *result; - dtmf_state *s; - int silence; - int i; - int di; - int ch; - int grp[2]; - char what; - char *p; - int thresh; - - while ((skb = skb_dequeue(&info->dtmf_queue))) { - result = (int *) skb->data; - s = info->dtmf_state; - grp[LOGRP] = grp[HIGRP] = -1; - silence = 0; - thresh = 0; - for (i = 0; i < NCOEFF; i++) { - if (result[i] > DTMF_TRESH) { - if (result[i] > thresh) - thresh = result[i]; - } - else if (result[i] < SILENCE_TRESH) - silence++; - } - if (silence == NCOEFF) - what = ' '; - else { - if (thresh > 0) { - thresh = thresh >> 4; /* touchtones must match within 12 dB */ - for (i = 0; i < NCOEFF; i++) { - if (result[i] < thresh) - continue; /* ignore */ - /* good level found. This is allowed only one time per group */ - if (i < NCOEFF / 2) { - /* lowgroup*/ - if (grp[LOGRP] >= 0) { - // Bad. Another tone found. */ - grp[LOGRP] = -1; - break; - } - else - grp[LOGRP] = i; - } - else { /* higroup */ - if (grp[HIGRP] >= 0) { // Bad. Another tone found. */ - grp[HIGRP] = -1; - break; - } - else - grp[HIGRP] = i - NCOEFF/2; - } - } - if ((grp[LOGRP] >= 0) && (grp[HIGRP] >= 0)) { - what = dtmf_matrix[grp[LOGRP]][grp[HIGRP]]; - if (s->last != ' ' && s->last != '.') - s->last = what; /* min. 1 non-DTMF between DTMF */ - } else - what = '.'; - } - else - what = '.'; - } - if ((what != s->last) && (what != ' ') && (what != '.')) { - printk(KERN_DEBUG "dtmf: tt='%c'\n", what); - p = skb->data; - *p++ = 0x10; - *p = what; - skb_trim(skb, 2); - ISDN_AUDIO_SKB_DLECOUNT(skb) = 0; - ISDN_AUDIO_SKB_LOCK(skb) = 0; - di = info->isdn_driver; - ch = info->isdn_channel; - __skb_queue_tail(&dev->drv[di]->rpqueue[ch], skb); - dev->drv[di]->rcvcount[ch] += 2; - /* Schedule dequeuing */ - if ((dev->modempoll) && (info->rcvsched)) - isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1); - wake_up_interruptible(&dev->drv[di]->rcv_waitq[ch]); - } else - kfree_skb(skb); - s->last = what; - } -} - -/* - * Decode DTMF tones, queue result in separate sk_buf for - * later examination. - * Parameters: - * s = pointer to state-struct. - * buf = input audio data - * len = size of audio data. - * fmt = audio data format (0 = ulaw, 1 = alaw) - */ -void -isdn_audio_calc_dtmf(modem_info *info, unsigned char *buf, int len, int fmt) -{ - dtmf_state *s = info->dtmf_state; - int i; - int c; - - while (len) { - c = DTMF_NPOINTS - s->idx; - if (c > len) - c = len; - if (c <= 0) - break; - for (i = 0; i < c; i++) { - if (fmt) - s->buf[s->idx++] = - isdn_audio_alaw_to_s16[*buf++] >> (15 - AMP_BITS); - else - s->buf[s->idx++] = - isdn_audio_ulaw_to_s16[*buf++] >> (15 - AMP_BITS); - } - if (s->idx == DTMF_NPOINTS) { - isdn_audio_goertzel(s->buf, info); - s->idx = 0; - } - len -= c; - } -} - -silence_state * -isdn_audio_silence_init(silence_state *s) -{ - if (!s) - s = kmalloc(sizeof(silence_state), GFP_ATOMIC); - if (s) { - s->idx = 0; - s->state = 0; - } - return s; -} - -void -isdn_audio_calc_silence(modem_info *info, unsigned char *buf, int len, int fmt) -{ - silence_state *s = info->silence_state; - int i; - signed char c; - - if (!info->emu.vpar[1]) return; - - for (i = 0; i < len; i++) { - if (fmt) - c = isdn_audio_alaw_to_ulaw[*buf++]; - else - c = *buf++; - - if (c > 0) c -= 128; - c = abs(c); - - if (c > (info->emu.vpar[1] * 4)) { - s->idx = 0; - s->state = 1; - } else { - if (s->idx < 210000) s->idx++; - } - } -} - -void -isdn_audio_put_dle_code(modem_info *info, u_char code) -{ - struct sk_buff *skb; - int di; - int ch; - char *p; - - skb = dev_alloc_skb(2); - if (!skb) { - printk(KERN_WARNING - "isdn_audio: Could not alloc skb for ttyI%d\n", - info->line); - return; - } - p = skb_put(skb, 2); - p[0] = 0x10; - p[1] = code; - ISDN_AUDIO_SKB_DLECOUNT(skb) = 0; - ISDN_AUDIO_SKB_LOCK(skb) = 0; - di = info->isdn_driver; - ch = info->isdn_channel; - __skb_queue_tail(&dev->drv[di]->rpqueue[ch], skb); - dev->drv[di]->rcvcount[ch] += 2; - /* Schedule dequeuing */ - if ((dev->modempoll) && (info->rcvsched)) - isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1); - wake_up_interruptible(&dev->drv[di]->rcv_waitq[ch]); -} - -void -isdn_audio_eval_silence(modem_info *info) -{ - silence_state *s = info->silence_state; - char what; - - what = ' '; - - if (s->idx > (info->emu.vpar[2] * 800)) { - s->idx = 0; - if (!s->state) { /* silence from beginning of rec */ - what = 's'; - } else { - what = 'q'; - } - } - if ((what == 's') || (what == 'q')) { - printk(KERN_DEBUG "ttyI%d: %s\n", info->line, - (what == 's') ? "silence" : "quiet"); - isdn_audio_put_dle_code(info, what); - } -} diff --git a/drivers/isdn/i4l/isdn_audio.h b/drivers/isdn/i4l/isdn_audio.h deleted file mode 100644 index 013c3582e0d1..000000000000 --- a/drivers/isdn/i4l/isdn_audio.h +++ /dev/null @@ -1,44 +0,0 @@ -/* $Id: isdn_audio.h,v 1.1.2.2 2004/01/12 22:37:18 keil Exp $ - * - * Linux ISDN subsystem, audio conversion and compression (linklevel). - * - * Copyright 1994-1999 by Fritz Elfert (fritz@isdn4linux.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#define DTMF_NPOINTS 205 /* Number of samples for DTMF recognition */ -typedef struct adpcm_state { - int a; - int d; - int word; - int nleft; - int nbits; -} adpcm_state; - -typedef struct dtmf_state { - char last; - char llast; - int idx; - int buf[DTMF_NPOINTS]; -} dtmf_state; - -typedef struct silence_state { - int state; - unsigned int idx; -} silence_state; - -extern void isdn_audio_ulaw2alaw(unsigned char *, unsigned long); -extern void isdn_audio_alaw2ulaw(unsigned char *, unsigned long); -extern adpcm_state *isdn_audio_adpcm_init(adpcm_state *, int); -extern int isdn_audio_adpcm2xlaw(adpcm_state *, int, unsigned char *, unsigned char *, int); -extern int isdn_audio_xlaw2adpcm(adpcm_state *, int, unsigned char *, unsigned char *, int); -extern void isdn_audio_calc_dtmf(modem_info *, unsigned char *, int, int); -extern void isdn_audio_eval_dtmf(modem_info *); -dtmf_state *isdn_audio_dtmf_init(dtmf_state *); -extern void isdn_audio_calc_silence(modem_info *, unsigned char *, int, int); -extern void isdn_audio_eval_silence(modem_info *); -silence_state *isdn_audio_silence_init(silence_state *); -extern void isdn_audio_put_dle_code(modem_info *, u_char); diff --git a/drivers/isdn/i4l/isdn_bsdcomp.c b/drivers/isdn/i4l/isdn_bsdcomp.c deleted file mode 100644 index 7f28b967ed19..000000000000 --- a/drivers/isdn/i4l/isdn_bsdcomp.c +++ /dev/null @@ -1,930 +0,0 @@ -/* - * BSD compression module - * - * Patched version for ISDN syncPPP written 1997/1998 by Michael Hipp - * The whole module is now SKB based. - * - */ - -/* - * Update: The Berkeley copyright was changed, and the change - * is retroactive to all "true" BSD software (ie everything - * from UCB as opposed to other peoples code that just carried - * the same license). The new copyright doesn't clash with the - * GPL, so the module-only restriction has been removed.. - */ - -/* - * Original copyright notice: - * - * Copyright (c) 1985, 1986 The Regents of the University of California. - * All rights reserved. - * - * This code is derived from software contributed to Berkeley by - * James A. Woods, derived from original work by Spencer Thomas - * and Joseph Orost. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. All advertising materials mentioning features or use of this software - * must display the following acknowledgement: - * This product includes software developed by the University of - * California, Berkeley and its contributors. - * 4. Neither the name of the University nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND - * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS - * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) - * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT - * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY - * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGE. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include /* used in new tty drivers */ -#include /* used in new tty drivers */ -#include - -#include -#include - -#include - -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include -#include -#include -#include - -#include "isdn_ppp.h" - -MODULE_DESCRIPTION("ISDN4Linux: BSD Compression for PPP over ISDN"); -MODULE_LICENSE("Dual BSD/GPL"); - -#define BSD_VERSION(x) ((x) >> 5) -#define BSD_NBITS(x) ((x) & 0x1F) - -#define BSD_CURRENT_VERSION 1 - -#define DEBUG 1 - -/* - * A dictionary for doing BSD compress. - */ - -struct bsd_dict { - u32 fcode; - u16 codem1; /* output of hash table -1 */ - u16 cptr; /* map code to hash table entry */ -}; - -struct bsd_db { - int totlen; /* length of this structure */ - unsigned int hsize; /* size of the hash table */ - unsigned char hshift; /* used in hash function */ - unsigned char n_bits; /* current bits/code */ - unsigned char maxbits; /* maximum bits/code */ - unsigned char debug; /* non-zero if debug desired */ - unsigned char unit; /* ppp unit number */ - u16 seqno; /* sequence # of next packet */ - unsigned int mru; /* size of receive (decompress) bufr */ - unsigned int maxmaxcode; /* largest valid code */ - unsigned int max_ent; /* largest code in use */ - unsigned int in_count; /* uncompressed bytes, aged */ - unsigned int bytes_out; /* compressed bytes, aged */ - unsigned int ratio; /* recent compression ratio */ - unsigned int checkpoint; /* when to next check the ratio */ - unsigned int clear_count; /* times dictionary cleared */ - unsigned int incomp_count; /* incompressible packets */ - unsigned int incomp_bytes; /* incompressible bytes */ - unsigned int uncomp_count; /* uncompressed packets */ - unsigned int uncomp_bytes; /* uncompressed bytes */ - unsigned int comp_count; /* compressed packets */ - unsigned int comp_bytes; /* compressed bytes */ - unsigned short *lens; /* array of lengths of codes */ - struct bsd_dict *dict; /* dictionary */ - int xmit; -}; - -#define BSD_OVHD 2 /* BSD compress overhead/packet */ -#define MIN_BSD_BITS 9 -#define BSD_INIT_BITS MIN_BSD_BITS -#define MAX_BSD_BITS 15 - -/* - * the next two codes should not be changed lightly, as they must not - * lie within the contiguous general code space. - */ -#define CLEAR 256 /* table clear output code */ -#define FIRST 257 /* first free entry */ -#define LAST 255 - -#define MAXCODE(b) ((1 << (b)) - 1) -#define BADCODEM1 MAXCODE(MAX_BSD_BITS) - -#define BSD_HASH(prefix, suffix, hshift) ((((unsigned long)(suffix)) << (hshift)) \ - ^ (unsigned long)(prefix)) -#define BSD_KEY(prefix, suffix) ((((unsigned long)(suffix)) << 16) \ - + (unsigned long)(prefix)) - -#define CHECK_GAP 10000 /* Ratio check interval */ - -#define RATIO_SCALE_LOG 8 -#define RATIO_SCALE (1 << RATIO_SCALE_LOG) -#define RATIO_MAX (0x7fffffff >> RATIO_SCALE_LOG) - -/* - * clear the dictionary - */ - -static void bsd_clear(struct bsd_db *db) -{ - db->clear_count++; - db->max_ent = FIRST - 1; - db->n_bits = BSD_INIT_BITS; - db->bytes_out = 0; - db->in_count = 0; - db->incomp_count = 0; - db->ratio = 0; - db->checkpoint = CHECK_GAP; -} - -/* - * If the dictionary is full, then see if it is time to reset it. - * - * Compute the compression ratio using fixed-point arithmetic - * with 8 fractional bits. - * - * Since we have an infinite stream instead of a single file, - * watch only the local compression ratio. - * - * Since both peers must reset the dictionary at the same time even in - * the absence of CLEAR codes (while packets are incompressible), they - * must compute the same ratio. - */ -static int bsd_check(struct bsd_db *db) /* 1=output CLEAR */ -{ - unsigned int new_ratio; - - if (db->in_count >= db->checkpoint) - { - /* age the ratio by limiting the size of the counts */ - if (db->in_count >= RATIO_MAX || db->bytes_out >= RATIO_MAX) - { - db->in_count -= (db->in_count >> 2); - db->bytes_out -= (db->bytes_out >> 2); - } - - db->checkpoint = db->in_count + CHECK_GAP; - - if (db->max_ent >= db->maxmaxcode) - { - /* Reset the dictionary only if the ratio is worse, - * or if it looks as if it has been poisoned - * by incompressible data. - * - * This does not overflow, because - * db->in_count <= RATIO_MAX. - */ - - new_ratio = db->in_count << RATIO_SCALE_LOG; - if (db->bytes_out != 0) - { - new_ratio /= db->bytes_out; - } - - if (new_ratio < db->ratio || new_ratio < 1 * RATIO_SCALE) - { - bsd_clear(db); - return 1; - } - db->ratio = new_ratio; - } - } - return 0; -} - -/* - * Return statistics. - */ - -static void bsd_stats(void *state, struct compstat *stats) -{ - struct bsd_db *db = (struct bsd_db *) state; - - stats->unc_bytes = db->uncomp_bytes; - stats->unc_packets = db->uncomp_count; - stats->comp_bytes = db->comp_bytes; - stats->comp_packets = db->comp_count; - stats->inc_bytes = db->incomp_bytes; - stats->inc_packets = db->incomp_count; - stats->in_count = db->in_count; - stats->bytes_out = db->bytes_out; -} - -/* - * Reset state, as on a CCP ResetReq. - */ -static void bsd_reset(void *state, unsigned char code, unsigned char id, - unsigned char *data, unsigned len, - struct isdn_ppp_resetparams *rsparm) -{ - struct bsd_db *db = (struct bsd_db *) state; - - bsd_clear(db); - db->seqno = 0; - db->clear_count = 0; -} - -/* - * Release the compression structure - */ -static void bsd_free(void *state) -{ - struct bsd_db *db = (struct bsd_db *) state; - - if (db) { - /* - * Release the dictionary - */ - vfree(db->dict); - db->dict = NULL; - - /* - * Release the string buffer - */ - vfree(db->lens); - db->lens = NULL; - - /* - * Finally release the structure itself. - */ - kfree(db); - } -} - - -/* - * Allocate space for a (de) compressor. - */ -static void *bsd_alloc(struct isdn_ppp_comp_data *data) -{ - int bits; - unsigned int hsize, hshift, maxmaxcode; - struct bsd_db *db; - int decomp; - - static unsigned int htab[][2] = { - { 5003 , 4 } , { 5003 , 4 } , { 5003 , 4 } , { 5003 , 4 } , - { 9001 , 5 } , { 18013 , 6 } , { 35023 , 7 } , { 69001 , 8 } - }; - - if (data->optlen != 1 || data->num != CI_BSD_COMPRESS - || BSD_VERSION(data->options[0]) != BSD_CURRENT_VERSION) - return NULL; - - bits = BSD_NBITS(data->options[0]); - - if (bits < 9 || bits > 15) - return NULL; - - hsize = htab[bits - 9][0]; - hshift = htab[bits - 9][1]; - - /* - * Allocate the main control structure for this instance. - */ - maxmaxcode = MAXCODE(bits); - db = kzalloc(sizeof(struct bsd_db), GFP_KERNEL); - if (!db) - return NULL; - - db->xmit = data->flags & IPPP_COMP_FLAG_XMIT; - decomp = db->xmit ? 0 : 1; - - /* - * Allocate space for the dictionary. This may be more than one page in - * length. - */ - db->dict = vmalloc(array_size(hsize, sizeof(struct bsd_dict))); - if (!db->dict) { - bsd_free(db); - return NULL; - } - - /* - * If this is the compression buffer then there is no length data. - * For decompression, the length information is needed as well. - */ - if (!decomp) - db->lens = NULL; - else { - db->lens = vmalloc(array_size(sizeof(db->lens[0]), - maxmaxcode + 1)); - if (!db->lens) { - bsd_free(db); - return (NULL); - } - } - - /* - * Initialize the data information for the compression code - */ - db->totlen = sizeof(struct bsd_db) + (sizeof(struct bsd_dict) * hsize); - db->hsize = hsize; - db->hshift = hshift; - db->maxmaxcode = maxmaxcode; - db->maxbits = bits; - - return (void *)db; -} - -/* - * Initialize the database. - */ -static int bsd_init(void *state, struct isdn_ppp_comp_data *data, int unit, int debug) -{ - struct bsd_db *db = state; - int indx; - int decomp; - - if (!state || !data) { - printk(KERN_ERR "isdn_bsd_init: [%d] ERR, state %lx data %lx\n", unit, (long)state, (long)data); - return 0; - } - - decomp = db->xmit ? 0 : 1; - - if (data->optlen != 1 || data->num != CI_BSD_COMPRESS - || (BSD_VERSION(data->options[0]) != BSD_CURRENT_VERSION) - || (BSD_NBITS(data->options[0]) != db->maxbits) - || (decomp && db->lens == NULL)) { - printk(KERN_ERR "isdn_bsd: %d %d %d %d %lx\n", data->optlen, data->num, data->options[0], decomp, (unsigned long)db->lens); - return 0; - } - - if (decomp) - for (indx = LAST; indx >= 0; indx--) - db->lens[indx] = 1; - - indx = db->hsize; - while (indx-- != 0) { - db->dict[indx].codem1 = BADCODEM1; - db->dict[indx].cptr = 0; - } - - db->unit = unit; - db->mru = 0; - - db->debug = 1; - - bsd_reset(db, 0, 0, NULL, 0, NULL); - - return 1; -} - -/* - * Obtain pointers to the various structures in the compression tables - */ - -#define dict_ptrx(p, idx) &(p->dict[idx]) -#define lens_ptrx(p, idx) &(p->lens[idx]) - -#ifdef DEBUG -static unsigned short *lens_ptr(struct bsd_db *db, int idx) -{ - if ((unsigned int) idx > (unsigned int) db->maxmaxcode) { - printk(KERN_DEBUG "<9>ppp: lens_ptr(%d) > max\n", idx); - idx = 0; - } - return lens_ptrx(db, idx); -} - -static struct bsd_dict *dict_ptr(struct bsd_db *db, int idx) -{ - if ((unsigned int) idx >= (unsigned int) db->hsize) { - printk(KERN_DEBUG "<9>ppp: dict_ptr(%d) > max\n", idx); - idx = 0; - } - return dict_ptrx(db, idx); -} - -#else -#define lens_ptr(db, idx) lens_ptrx(db, idx) -#define dict_ptr(db, idx) dict_ptrx(db, idx) -#endif - -/* - * compress a packet - */ -static int bsd_compress(void *state, struct sk_buff *skb_in, struct sk_buff *skb_out, int proto) -{ - struct bsd_db *db; - int hshift; - unsigned int max_ent; - unsigned int n_bits; - unsigned int bitno; - unsigned long accm; - int ent; - unsigned long fcode; - struct bsd_dict *dictp; - unsigned char c; - int hval, disp, ilen, mxcode; - unsigned char *rptr = skb_in->data; - int isize = skb_in->len; - -#define OUTPUT(ent) \ - { \ - bitno -= n_bits; \ - accm |= ((ent) << bitno); \ - do { \ - if (skb_out && skb_tailroom(skb_out) > 0) \ - skb_put_u8(skb_out, (u8)(accm >> 24)); \ - accm <<= 8; \ - bitno += 8; \ - } while (bitno <= 24); \ - } - - /* - * If the protocol is not in the range we're interested in, - * just return without compressing the packet. If it is, - * the protocol becomes the first byte to compress. - */ - printk(KERN_DEBUG "bsd_compress called with %x\n", proto); - - ent = proto; - if (proto < 0x21 || proto > 0xf9 || !(proto & 0x1)) - return 0; - - db = (struct bsd_db *) state; - hshift = db->hshift; - max_ent = db->max_ent; - n_bits = db->n_bits; - bitno = 32; - accm = 0; - mxcode = MAXCODE(n_bits); - - /* This is the PPP header information */ - if (skb_out && skb_tailroom(skb_out) >= 2) { - char *v = skb_put(skb_out, 2); - /* we only push our own data on the header, - AC,PC and protos is pushed by caller */ - v[0] = db->seqno >> 8; - v[1] = db->seqno; - } - - ilen = ++isize; /* This is off by one, but that is what is in draft! */ - - while (--ilen > 0) { - c = *rptr++; - fcode = BSD_KEY(ent, c); - hval = BSD_HASH(ent, c, hshift); - dictp = dict_ptr(db, hval); - - /* Validate and then check the entry. */ - if (dictp->codem1 >= max_ent) - goto nomatch; - - if (dictp->fcode == fcode) { - ent = dictp->codem1 + 1; - continue; /* found (prefix,suffix) */ - } - - /* continue probing until a match or invalid entry */ - disp = (hval == 0) ? 1 : hval; - - do { - hval += disp; - if (hval >= db->hsize) - hval -= db->hsize; - dictp = dict_ptr(db, hval); - if (dictp->codem1 >= max_ent) - goto nomatch; - } while (dictp->fcode != fcode); - - ent = dictp->codem1 + 1; /* finally found (prefix,suffix) */ - continue; - - nomatch: - OUTPUT(ent); /* output the prefix */ - - /* code -> hashtable */ - if (max_ent < db->maxmaxcode) { - struct bsd_dict *dictp2; - struct bsd_dict *dictp3; - int indx; - - /* expand code size if needed */ - if (max_ent >= mxcode) { - db->n_bits = ++n_bits; - mxcode = MAXCODE(n_bits); - } - - /* - * Invalidate old hash table entry using - * this code, and then take it over. - */ - dictp2 = dict_ptr(db, max_ent + 1); - indx = dictp2->cptr; - dictp3 = dict_ptr(db, indx); - - if (dictp3->codem1 == max_ent) - dictp3->codem1 = BADCODEM1; - - dictp2->cptr = hval; - dictp->codem1 = max_ent; - dictp->fcode = fcode; - db->max_ent = ++max_ent; - - if (db->lens) { - unsigned short *len1 = lens_ptr(db, max_ent); - unsigned short *len2 = lens_ptr(db, ent); - *len1 = *len2 + 1; - } - } - ent = c; - } - - OUTPUT(ent); /* output the last code */ - - if (skb_out) - db->bytes_out += skb_out->len; /* Do not count bytes from here */ - db->uncomp_bytes += isize; - db->in_count += isize; - ++db->uncomp_count; - ++db->seqno; - - if (bitno < 32) - ++db->bytes_out; /* must be set before calling bsd_check */ - - /* - * Generate the clear command if needed - */ - - if (bsd_check(db)) - OUTPUT(CLEAR); - - /* - * Pad dribble bits of last code with ones. - * Do not emit a completely useless byte of ones. - */ - if (bitno < 32 && skb_out && skb_tailroom(skb_out) > 0) - skb_put_u8(skb_out, - (unsigned char)((accm | (0xff << (bitno - 8))) >> 24)); - - /* - * Increase code size if we would have without the packet - * boundary because the decompressor will do so. - */ - if (max_ent >= mxcode && max_ent < db->maxmaxcode) - db->n_bits++; - - /* If output length is too large then this is an incompressible frame. */ - if (!skb_out || skb_out->len >= skb_in->len) { - ++db->incomp_count; - db->incomp_bytes += isize; - return 0; - } - - /* Count the number of compressed frames */ - ++db->comp_count; - db->comp_bytes += skb_out->len; - return skb_out->len; - -#undef OUTPUT -} - -/* - * Update the "BSD Compress" dictionary on the receiver for - * incompressible data by pretending to compress the incoming data. - */ -static void bsd_incomp(void *state, struct sk_buff *skb_in, int proto) -{ - bsd_compress(state, skb_in, NULL, proto); -} - -/* - * Decompress "BSD Compress". - */ -static int bsd_decompress(void *state, struct sk_buff *skb_in, struct sk_buff *skb_out, - struct isdn_ppp_resetparams *rsparm) -{ - struct bsd_db *db; - unsigned int max_ent; - unsigned long accm; - unsigned int bitno; /* 1st valid bit in accm */ - unsigned int n_bits; - unsigned int tgtbitno; /* bitno when we have a code */ - struct bsd_dict *dictp; - int seq; - unsigned int incode; - unsigned int oldcode; - unsigned int finchar; - unsigned char *p, *ibuf; - int ilen; - int codelen; - int extra; - - db = (struct bsd_db *) state; - max_ent = db->max_ent; - accm = 0; - bitno = 32; /* 1st valid bit in accm */ - n_bits = db->n_bits; - tgtbitno = 32 - n_bits; /* bitno when we have a code */ - - printk(KERN_DEBUG "bsd_decompress called\n"); - - if (!skb_in || !skb_out) { - printk(KERN_ERR "bsd_decompress called with NULL parameter\n"); - return DECOMP_ERROR; - } - - /* - * Get the sequence number. - */ - if ((p = skb_pull(skb_in, 2)) == NULL) { - return DECOMP_ERROR; - } - p -= 2; - seq = (p[0] << 8) + p[1]; - ilen = skb_in->len; - ibuf = skb_in->data; - - /* - * Check the sequence number and give up if it differs from - * the value we're expecting. - */ - if (seq != db->seqno) { - if (db->debug) { - printk(KERN_DEBUG "bsd_decomp%d: bad sequence # %d, expected %d\n", - db->unit, seq, db->seqno - 1); - } - return DECOMP_ERROR; - } - - ++db->seqno; - db->bytes_out += ilen; - - if (skb_tailroom(skb_out) > 0) - skb_put_u8(skb_out, 0); - else - return DECOMP_ERR_NOMEM; - - oldcode = CLEAR; - - /* - * Keep the checkpoint correctly so that incompressible packets - * clear the dictionary at the proper times. - */ - - for (;;) { - if (ilen-- <= 0) { - db->in_count += (skb_out->len - 1); /* don't count the header */ - break; - } - - /* - * Accumulate bytes until we have a complete code. - * Then get the next code, relying on the 32-bit, - * unsigned accm to mask the result. - */ - - bitno -= 8; - accm |= *ibuf++ << bitno; - if (tgtbitno < bitno) - continue; - - incode = accm >> tgtbitno; - accm <<= n_bits; - bitno += n_bits; - - /* - * The dictionary must only be cleared at the end of a packet. - */ - - if (incode == CLEAR) { - if (ilen > 0) { - if (db->debug) - printk(KERN_DEBUG "bsd_decomp%d: bad CLEAR\n", db->unit); - return DECOMP_FATALERROR; /* probably a bug */ - } - bsd_clear(db); - break; - } - - if ((incode > max_ent + 2) || (incode > db->maxmaxcode) - || (incode > max_ent && oldcode == CLEAR)) { - if (db->debug) { - printk(KERN_DEBUG "bsd_decomp%d: bad code 0x%x oldcode=0x%x ", - db->unit, incode, oldcode); - printk(KERN_DEBUG "max_ent=0x%x skb->Len=%d seqno=%d\n", - max_ent, skb_out->len, db->seqno); - } - return DECOMP_FATALERROR; /* probably a bug */ - } - - /* Special case for KwKwK string. */ - if (incode > max_ent) { - finchar = oldcode; - extra = 1; - } else { - finchar = incode; - extra = 0; - } - - codelen = *(lens_ptr(db, finchar)); - if (skb_tailroom(skb_out) < codelen + extra) { - if (db->debug) { - printk(KERN_DEBUG "bsd_decomp%d: ran out of mru\n", db->unit); -#ifdef DEBUG - printk(KERN_DEBUG " len=%d, finchar=0x%x, codelen=%d,skblen=%d\n", - ilen, finchar, codelen, skb_out->len); -#endif - } - return DECOMP_FATALERROR; - } - - /* - * Decode this code and install it in the decompressed buffer. - */ - - p = skb_put(skb_out, codelen); - p += codelen; - while (finchar > LAST) { - struct bsd_dict *dictp2 = dict_ptr(db, finchar); - - dictp = dict_ptr(db, dictp2->cptr); - -#ifdef DEBUG - if (--codelen <= 0 || dictp->codem1 != finchar - 1) { - if (codelen <= 0) { - printk(KERN_ERR "bsd_decomp%d: fell off end of chain ", db->unit); - printk(KERN_ERR "0x%x at 0x%x by 0x%x, max_ent=0x%x\n", incode, finchar, dictp2->cptr, max_ent); - } else { - if (dictp->codem1 != finchar - 1) { - printk(KERN_ERR "bsd_decomp%d: bad code chain 0x%x finchar=0x%x ", db->unit, incode, finchar); - printk(KERN_ERR "oldcode=0x%x cptr=0x%x codem1=0x%x\n", oldcode, dictp2->cptr, dictp->codem1); - } - } - return DECOMP_FATALERROR; - } -#endif - - { - u32 fcode = dictp->fcode; - *--p = (fcode >> 16) & 0xff; - finchar = fcode & 0xffff; - } - } - *--p = finchar; - -#ifdef DEBUG - if (--codelen != 0) - printk(KERN_ERR "bsd_decomp%d: short by %d after code 0x%x, max_ent=0x%x\n", db->unit, codelen, incode, max_ent); -#endif - - if (extra) /* the KwKwK case again */ - skb_put_u8(skb_out, finchar); - - /* - * If not first code in a packet, and - * if not out of code space, then allocate a new code. - * - * Keep the hash table correct so it can be used - * with uncompressed packets. - */ - if (oldcode != CLEAR && max_ent < db->maxmaxcode) { - struct bsd_dict *dictp2, *dictp3; - u16 *lens1, *lens2; - unsigned long fcode; - int hval, disp, indx; - - fcode = BSD_KEY(oldcode, finchar); - hval = BSD_HASH(oldcode, finchar, db->hshift); - dictp = dict_ptr(db, hval); - - /* look for a free hash table entry */ - if (dictp->codem1 < max_ent) { - disp = (hval == 0) ? 1 : hval; - do { - hval += disp; - if (hval >= db->hsize) - hval -= db->hsize; - dictp = dict_ptr(db, hval); - } while (dictp->codem1 < max_ent); - } - - /* - * Invalidate previous hash table entry - * assigned this code, and then take it over - */ - - dictp2 = dict_ptr(db, max_ent + 1); - indx = dictp2->cptr; - dictp3 = dict_ptr(db, indx); - - if (dictp3->codem1 == max_ent) - dictp3->codem1 = BADCODEM1; - - dictp2->cptr = hval; - dictp->codem1 = max_ent; - dictp->fcode = fcode; - db->max_ent = ++max_ent; - - /* Update the length of this string. */ - lens1 = lens_ptr(db, max_ent); - lens2 = lens_ptr(db, oldcode); - *lens1 = *lens2 + 1; - - /* Expand code size if needed. */ - if (max_ent >= MAXCODE(n_bits) && max_ent < db->maxmaxcode) { - db->n_bits = ++n_bits; - tgtbitno = 32-n_bits; - } - } - oldcode = incode; - } - - ++db->comp_count; - ++db->uncomp_count; - db->comp_bytes += skb_in->len - BSD_OVHD; - db->uncomp_bytes += skb_out->len; - - if (bsd_check(db)) { - if (db->debug) - printk(KERN_DEBUG "bsd_decomp%d: peer should have cleared dictionary on %d\n", - db->unit, db->seqno - 1); - } - return skb_out->len; -} - -/************************************************************* - * Table of addresses for the BSD compression module - *************************************************************/ - -static struct isdn_ppp_compressor ippp_bsd_compress = { - .owner = THIS_MODULE, - .num = CI_BSD_COMPRESS, - .alloc = bsd_alloc, - .free = bsd_free, - .init = bsd_init, - .reset = bsd_reset, - .compress = bsd_compress, - .decompress = bsd_decompress, - .incomp = bsd_incomp, - .stat = bsd_stats, -}; - -/************************************************************* - * Module support routines - *************************************************************/ - -static int __init isdn_bsdcomp_init(void) -{ - int answer = isdn_ppp_register_compressor(&ippp_bsd_compress); - if (answer == 0) - printk(KERN_INFO "PPP BSD Compression module registered\n"); - return answer; -} - -static void __exit isdn_bsdcomp_exit(void) -{ - isdn_ppp_unregister_compressor(&ippp_bsd_compress); -} - -module_init(isdn_bsdcomp_init); -module_exit(isdn_bsdcomp_exit); diff --git a/drivers/isdn/i4l/isdn_common.c b/drivers/isdn/i4l/isdn_common.c deleted file mode 100644 index 74ee00f5b310..000000000000 --- a/drivers/isdn/i4l/isdn_common.c +++ /dev/null @@ -1,2368 +0,0 @@ -/* $Id: isdn_common.c,v 1.1.2.3 2004/02/10 01:07:13 keil Exp $ - * - * Linux ISDN subsystem, common used functions (linklevel). - * - * Copyright 1994-1999 by Fritz Elfert (fritz@isdn4linux.de) - * Copyright 1995,96 Thinking Objects Software GmbH Wuerzburg - * Copyright 1995,96 by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include "isdn_common.h" -#include "isdn_tty.h" -#include "isdn_net.h" -#include "isdn_ppp.h" -#ifdef CONFIG_ISDN_AUDIO -#include "isdn_audio.h" -#endif -#ifdef CONFIG_ISDN_DIVERSION_MODULE -#define CONFIG_ISDN_DIVERSION -#endif -#ifdef CONFIG_ISDN_DIVERSION -#include -#endif /* CONFIG_ISDN_DIVERSION */ -#include "isdn_v110.h" - -/* Debugflags */ -#undef ISDN_DEBUG_STATCALLB - -MODULE_DESCRIPTION("ISDN4Linux: link layer"); -MODULE_AUTHOR("Fritz Elfert"); -MODULE_LICENSE("GPL"); - -isdn_dev *dev; - -static DEFINE_MUTEX(isdn_mutex); -static char *isdn_revision = "$Revision: 1.1.2.3 $"; - -extern char *isdn_net_revision; -#ifdef CONFIG_ISDN_PPP -extern char *isdn_ppp_revision; -#else -static char *isdn_ppp_revision = ": none $"; -#endif -#ifdef CONFIG_ISDN_AUDIO -extern char *isdn_audio_revision; -#else -static char *isdn_audio_revision = ": none $"; -#endif -extern char *isdn_v110_revision; - -#ifdef CONFIG_ISDN_DIVERSION -static isdn_divert_if *divert_if; /* = NULL */ -#endif /* CONFIG_ISDN_DIVERSION */ - - -static int isdn_writebuf_stub(int, int, const u_char __user *, int); -static void set_global_features(void); -static int isdn_wildmat(char *s, char *p); -static int isdn_add_channels(isdn_driver_t *d, int drvidx, int n, int adding); - -static inline void -isdn_lock_driver(isdn_driver_t *drv) -{ - try_module_get(drv->interface->owner); - drv->locks++; -} - -void -isdn_lock_drivers(void) -{ - int i; - - for (i = 0; i < ISDN_MAX_DRIVERS; i++) { - if (!dev->drv[i]) - continue; - isdn_lock_driver(dev->drv[i]); - } -} - -static inline void -isdn_unlock_driver(isdn_driver_t *drv) -{ - if (drv->locks > 0) { - drv->locks--; - module_put(drv->interface->owner); - } -} - -void -isdn_unlock_drivers(void) -{ - int i; - - for (i = 0; i < ISDN_MAX_DRIVERS; i++) { - if (!dev->drv[i]) - continue; - isdn_unlock_driver(dev->drv[i]); - } -} - -#if defined(ISDN_DEBUG_NET_DUMP) || defined(ISDN_DEBUG_MODEM_DUMP) -void -isdn_dumppkt(char *s, u_char *p, int len, int dumplen) -{ - int dumpc; - - printk(KERN_DEBUG "%s(%d) ", s, len); - for (dumpc = 0; (dumpc < dumplen) && (len); len--, dumpc++) - printk(" %02x", *p++); - printk("\n"); -} -#endif - -/* - * I picked the pattern-matching-functions from an old GNU-tar version (1.10) - * It was originally written and put to PD by rs@mirror.TMC.COM (Rich Salz) - */ -static int -isdn_star(char *s, char *p) -{ - while (isdn_wildmat(s, p)) { - if (*++s == '\0') - return (2); - } - return (0); -} - -/* - * Shell-type Pattern-matching for incoming caller-Ids - * This function gets a string in s and checks, if it matches the pattern - * given in p. - * - * Return: - * 0 = match. - * 1 = no match. - * 2 = no match. Would eventually match, if s would be longer. - * - * Possible Patterns: - * - * '?' matches one character - * '*' matches zero or more characters - * [xyz] matches the set of characters in brackets. - * [^xyz] matches any single character not in the set of characters - */ - -static int -isdn_wildmat(char *s, char *p) -{ - register int last; - register int matched; - register int reverse; - register int nostar = 1; - - if (!(*s) && !(*p)) - return (1); - for (; *p; s++, p++) - switch (*p) { - case '\\': - /* Literal match with following character. */ - p++; - /* fall through */ - default: - if (*s != *p) - return (*s == '\0') ? 2 : 1; - continue; - case '?': - /* Match anything. */ - if (*s == '\0') - return (2); - continue; - case '*': - nostar = 0; - /* Trailing star matches everything. */ - return (*++p ? isdn_star(s, p) : 0); - case '[': - /* [^....] means inverse character class. */ - if ((reverse = (p[1] == '^'))) - p++; - for (last = 0, matched = 0; *++p && (*p != ']'); last = *p) - /* This next line requires a good C compiler. */ - if (*p == '-' ? *s <= *++p && *s >= last : *s == *p) - matched = 1; - if (matched == reverse) - return (1); - continue; - } - return (*s == '\0') ? 0 : nostar; -} - -int isdn_msncmp(const char *msn1, const char *msn2) -{ - char TmpMsn1[ISDN_MSNLEN]; - char TmpMsn2[ISDN_MSNLEN]; - char *p; - - for (p = TmpMsn1; *msn1 && *msn1 != ':';) // Strip off a SPID - *p++ = *msn1++; - *p = '\0'; - - for (p = TmpMsn2; *msn2 && *msn2 != ':';) // Strip off a SPID - *p++ = *msn2++; - *p = '\0'; - - return isdn_wildmat(TmpMsn1, TmpMsn2); -} - -int -isdn_dc2minor(int di, int ch) -{ - int i; - for (i = 0; i < ISDN_MAX_CHANNELS; i++) - if (dev->chanmap[i] == ch && dev->drvmap[i] == di) - return i; - return -1; -} - -static int isdn_timer_cnt1 = 0; -static int isdn_timer_cnt2 = 0; -static int isdn_timer_cnt3 = 0; - -static void -isdn_timer_funct(struct timer_list *unused) -{ - int tf = dev->tflags; - if (tf & ISDN_TIMER_FAST) { - if (tf & ISDN_TIMER_MODEMREAD) - isdn_tty_readmodem(); - if (tf & ISDN_TIMER_MODEMPLUS) - isdn_tty_modem_escape(); - if (tf & ISDN_TIMER_MODEMXMIT) - isdn_tty_modem_xmit(); - } - if (tf & ISDN_TIMER_SLOW) { - if (++isdn_timer_cnt1 >= ISDN_TIMER_02SEC) { - isdn_timer_cnt1 = 0; - if (tf & ISDN_TIMER_NETDIAL) - isdn_net_dial(); - } - if (++isdn_timer_cnt2 >= ISDN_TIMER_1SEC) { - isdn_timer_cnt2 = 0; - if (tf & ISDN_TIMER_NETHANGUP) - isdn_net_autohup(); - if (++isdn_timer_cnt3 >= ISDN_TIMER_RINGING) { - isdn_timer_cnt3 = 0; - if (tf & ISDN_TIMER_MODEMRING) - isdn_tty_modem_ring(); - } - if (tf & ISDN_TIMER_CARRIER) - isdn_tty_carrier_timeout(); - } - } - if (tf) - mod_timer(&dev->timer, jiffies + ISDN_TIMER_RES); -} - -void -isdn_timer_ctrl(int tf, int onoff) -{ - unsigned long flags; - int old_tflags; - - spin_lock_irqsave(&dev->timerlock, flags); - if ((tf & ISDN_TIMER_SLOW) && (!(dev->tflags & ISDN_TIMER_SLOW))) { - /* If the slow-timer wasn't activated until now */ - isdn_timer_cnt1 = 0; - isdn_timer_cnt2 = 0; - } - old_tflags = dev->tflags; - if (onoff) - dev->tflags |= tf; - else - dev->tflags &= ~tf; - if (dev->tflags && !old_tflags) - mod_timer(&dev->timer, jiffies + ISDN_TIMER_RES); - spin_unlock_irqrestore(&dev->timerlock, flags); -} - -/* - * Receive a packet from B-Channel. (Called from low-level-module) - */ -static void -isdn_receive_skb_callback(int di, int channel, struct sk_buff *skb) -{ - int i; - - if ((i = isdn_dc2minor(di, channel)) == -1) { - dev_kfree_skb(skb); - return; - } - /* Update statistics */ - dev->ibytes[i] += skb->len; - - /* First, try to deliver data to network-device */ - if (isdn_net_rcv_skb(i, skb)) - return; - - /* V.110 handling - * makes sense for async streams only, so it is - * called after possible net-device delivery. - */ - if (dev->v110[i]) { - atomic_inc(&dev->v110use[i]); - skb = isdn_v110_decode(dev->v110[i], skb); - atomic_dec(&dev->v110use[i]); - if (!skb) - return; - } - - /* No network-device found, deliver to tty or raw-channel */ - if (skb->len) { - if (isdn_tty_rcv_skb(i, di, channel, skb)) - return; - wake_up_interruptible(&dev->drv[di]->rcv_waitq[channel]); - } else - dev_kfree_skb(skb); -} - -/* - * Intercept command from Linklevel to Lowlevel. - * If layer 2 protocol is V.110 and this is not supported by current - * lowlevel-driver, use driver's transparent mode and handle V.110 in - * linklevel instead. - */ -int -isdn_command(isdn_ctrl *cmd) -{ - if (cmd->driver == -1) { - printk(KERN_WARNING "isdn_command command(%x) driver -1\n", cmd->command); - return (1); - } - if (!dev->drv[cmd->driver]) { - printk(KERN_WARNING "isdn_command command(%x) dev->drv[%d] NULL\n", - cmd->command, cmd->driver); - return (1); - } - if (!dev->drv[cmd->driver]->interface) { - printk(KERN_WARNING "isdn_command command(%x) dev->drv[%d]->interface NULL\n", - cmd->command, cmd->driver); - return (1); - } - if (cmd->command == ISDN_CMD_SETL2) { - int idx = isdn_dc2minor(cmd->driver, cmd->arg & 255); - unsigned long l2prot = (cmd->arg >> 8) & 255; - unsigned long features = (dev->drv[cmd->driver]->interface->features - >> ISDN_FEATURE_L2_SHIFT) & - ISDN_FEATURE_L2_MASK; - unsigned long l2_feature = (1 << l2prot); - - switch (l2prot) { - case ISDN_PROTO_L2_V11096: - case ISDN_PROTO_L2_V11019: - case ISDN_PROTO_L2_V11038: - /* If V.110 requested, but not supported by - * HL-driver, set emulator-flag and change - * Layer-2 to transparent - */ - if (!(features & l2_feature)) { - dev->v110emu[idx] = l2prot; - cmd->arg = (cmd->arg & 255) | - (ISDN_PROTO_L2_TRANS << 8); - } else - dev->v110emu[idx] = 0; - } - } - return dev->drv[cmd->driver]->interface->command(cmd); -} - -void -isdn_all_eaz(int di, int ch) -{ - isdn_ctrl cmd; - - if (di < 0) - return; - cmd.driver = di; - cmd.arg = ch; - cmd.command = ISDN_CMD_SETEAZ; - cmd.parm.num[0] = '\0'; - isdn_command(&cmd); -} - -/* - * Begin of a CAPI like LL<->HL interface, currently used only for - * supplementary service (CAPI 2.0 part III) - */ -#include - -static int -isdn_capi_rec_hl_msg(capi_msg *cm) -{ - switch (cm->Command) { - case CAPI_FACILITY: - /* in the moment only handled in tty */ - return (isdn_tty_capi_facility(cm)); - default: - return (-1); - } -} - -static int -isdn_status_callback(isdn_ctrl *c) -{ - int di; - u_long flags; - int i; - int r; - int retval = 0; - isdn_ctrl cmd; - isdn_net_dev *p; - - di = c->driver; - i = isdn_dc2minor(di, c->arg); - switch (c->command) { - case ISDN_STAT_BSENT: - if (i < 0) - return -1; - if (dev->global_flags & ISDN_GLOBAL_STOPPED) - return 0; - if (isdn_net_stat_callback(i, c)) - return 0; - if (isdn_v110_stat_callback(i, c)) - return 0; - if (isdn_tty_stat_callback(i, c)) - return 0; - wake_up_interruptible(&dev->drv[di]->snd_waitq[c->arg]); - break; - case ISDN_STAT_STAVAIL: - dev->drv[di]->stavail += c->arg; - wake_up_interruptible(&dev->drv[di]->st_waitq); - break; - case ISDN_STAT_RUN: - dev->drv[di]->flags |= DRV_FLAG_RUNNING; - for (i = 0; i < ISDN_MAX_CHANNELS; i++) - if (dev->drvmap[i] == di) - isdn_all_eaz(di, dev->chanmap[i]); - set_global_features(); - break; - case ISDN_STAT_STOP: - dev->drv[di]->flags &= ~DRV_FLAG_RUNNING; - break; - case ISDN_STAT_ICALL: - if (i < 0) - return -1; -#ifdef ISDN_DEBUG_STATCALLB - printk(KERN_DEBUG "ICALL (net): %d %ld %s\n", di, c->arg, c->parm.num); -#endif - if (dev->global_flags & ISDN_GLOBAL_STOPPED) { - cmd.driver = di; - cmd.arg = c->arg; - cmd.command = ISDN_CMD_HANGUP; - isdn_command(&cmd); - return 0; - } - /* Try to find a network-interface which will accept incoming call */ - r = ((c->command == ISDN_STAT_ICALLW) ? 0 : isdn_net_find_icall(di, c->arg, i, &c->parm.setup)); - switch (r) { - case 0: - /* No network-device replies. - * Try ttyI's. - * These return 0 on no match, 1 on match and - * 3 on eventually match, if CID is longer. - */ - if (c->command == ISDN_STAT_ICALL) - if ((retval = isdn_tty_find_icall(di, c->arg, &c->parm.setup))) return (retval); -#ifdef CONFIG_ISDN_DIVERSION - if (divert_if) - if ((retval = divert_if->stat_callback(c))) - return (retval); /* processed */ -#endif /* CONFIG_ISDN_DIVERSION */ - if ((!retval) && (dev->drv[di]->flags & DRV_FLAG_REJBUS)) { - /* No tty responding */ - cmd.driver = di; - cmd.arg = c->arg; - cmd.command = ISDN_CMD_HANGUP; - isdn_command(&cmd); - retval = 2; - } - break; - case 1: - /* Schedule connection-setup */ - isdn_net_dial(); - cmd.driver = di; - cmd.arg = c->arg; - cmd.command = ISDN_CMD_ACCEPTD; - for (p = dev->netdev; p; p = p->next) - if (p->local->isdn_channel == cmd.arg) - { - strcpy(cmd.parm.setup.eazmsn, p->local->msn); - isdn_command(&cmd); - retval = 1; - break; - } - break; - - case 2: /* For calling back, first reject incoming call ... */ - case 3: /* Interface found, but down, reject call actively */ - retval = 2; - printk(KERN_INFO "isdn: Rejecting Call\n"); - cmd.driver = di; - cmd.arg = c->arg; - cmd.command = ISDN_CMD_HANGUP; - isdn_command(&cmd); - if (r == 3) - break; - /* Fall through */ - case 4: - /* ... then start callback. */ - isdn_net_dial(); - break; - case 5: - /* Number would eventually match, if longer */ - retval = 3; - break; - } -#ifdef ISDN_DEBUG_STATCALLB - printk(KERN_DEBUG "ICALL: ret=%d\n", retval); -#endif - return retval; - break; - case ISDN_STAT_CINF: - if (i < 0) - return -1; -#ifdef ISDN_DEBUG_STATCALLB - printk(KERN_DEBUG "CINF: %ld %s\n", c->arg, c->parm.num); -#endif - if (dev->global_flags & ISDN_GLOBAL_STOPPED) - return 0; - if (strcmp(c->parm.num, "0")) - isdn_net_stat_callback(i, c); - isdn_tty_stat_callback(i, c); - break; - case ISDN_STAT_CAUSE: -#ifdef ISDN_DEBUG_STATCALLB - printk(KERN_DEBUG "CAUSE: %ld %s\n", c->arg, c->parm.num); -#endif - printk(KERN_INFO "isdn: %s,ch%ld cause: %s\n", - dev->drvid[di], c->arg, c->parm.num); - isdn_tty_stat_callback(i, c); -#ifdef CONFIG_ISDN_DIVERSION - if (divert_if) - divert_if->stat_callback(c); -#endif /* CONFIG_ISDN_DIVERSION */ - break; - case ISDN_STAT_DISPLAY: -#ifdef ISDN_DEBUG_STATCALLB - printk(KERN_DEBUG "DISPLAY: %ld %s\n", c->arg, c->parm.display); -#endif - isdn_tty_stat_callback(i, c); -#ifdef CONFIG_ISDN_DIVERSION - if (divert_if) - divert_if->stat_callback(c); -#endif /* CONFIG_ISDN_DIVERSION */ - break; - case ISDN_STAT_DCONN: - if (i < 0) - return -1; -#ifdef ISDN_DEBUG_STATCALLB - printk(KERN_DEBUG "DCONN: %ld\n", c->arg); -#endif - if (dev->global_flags & ISDN_GLOBAL_STOPPED) - return 0; - /* Find any net-device, waiting for D-channel setup */ - if (isdn_net_stat_callback(i, c)) - break; - isdn_v110_stat_callback(i, c); - /* Find any ttyI, waiting for D-channel setup */ - if (isdn_tty_stat_callback(i, c)) { - cmd.driver = di; - cmd.arg = c->arg; - cmd.command = ISDN_CMD_ACCEPTB; - isdn_command(&cmd); - break; - } - break; - case ISDN_STAT_DHUP: - if (i < 0) - return -1; -#ifdef ISDN_DEBUG_STATCALLB - printk(KERN_DEBUG "DHUP: %ld\n", c->arg); -#endif - if (dev->global_flags & ISDN_GLOBAL_STOPPED) - return 0; - dev->drv[di]->online &= ~(1 << (c->arg)); - isdn_info_update(); - /* Signal hangup to network-devices */ - if (isdn_net_stat_callback(i, c)) - break; - isdn_v110_stat_callback(i, c); - if (isdn_tty_stat_callback(i, c)) - break; -#ifdef CONFIG_ISDN_DIVERSION - if (divert_if) - divert_if->stat_callback(c); -#endif /* CONFIG_ISDN_DIVERSION */ - break; - break; - case ISDN_STAT_BCONN: - if (i < 0) - return -1; -#ifdef ISDN_DEBUG_STATCALLB - printk(KERN_DEBUG "BCONN: %ld\n", c->arg); -#endif - /* Signal B-channel-connect to network-devices */ - if (dev->global_flags & ISDN_GLOBAL_STOPPED) - return 0; - dev->drv[di]->online |= (1 << (c->arg)); - isdn_info_update(); - if (isdn_net_stat_callback(i, c)) - break; - isdn_v110_stat_callback(i, c); - if (isdn_tty_stat_callback(i, c)) - break; - break; - case ISDN_STAT_BHUP: - if (i < 0) - return -1; -#ifdef ISDN_DEBUG_STATCALLB - printk(KERN_DEBUG "BHUP: %ld\n", c->arg); -#endif - if (dev->global_flags & ISDN_GLOBAL_STOPPED) - return 0; - dev->drv[di]->online &= ~(1 << (c->arg)); - isdn_info_update(); -#ifdef CONFIG_ISDN_X25 - /* Signal hangup to network-devices */ - if (isdn_net_stat_callback(i, c)) - break; -#endif - isdn_v110_stat_callback(i, c); - if (isdn_tty_stat_callback(i, c)) - break; - break; - case ISDN_STAT_NODCH: - if (i < 0) - return -1; -#ifdef ISDN_DEBUG_STATCALLB - printk(KERN_DEBUG "NODCH: %ld\n", c->arg); -#endif - if (dev->global_flags & ISDN_GLOBAL_STOPPED) - return 0; - if (isdn_net_stat_callback(i, c)) - break; - if (isdn_tty_stat_callback(i, c)) - break; - break; - case ISDN_STAT_ADDCH: - spin_lock_irqsave(&dev->lock, flags); - if (isdn_add_channels(dev->drv[di], di, c->arg, 1)) { - spin_unlock_irqrestore(&dev->lock, flags); - return -1; - } - spin_unlock_irqrestore(&dev->lock, flags); - isdn_info_update(); - break; - case ISDN_STAT_DISCH: - spin_lock_irqsave(&dev->lock, flags); - for (i = 0; i < ISDN_MAX_CHANNELS; i++) - if ((dev->drvmap[i] == di) && - (dev->chanmap[i] == c->arg)) { - if (c->parm.num[0]) - dev->usage[i] &= ~ISDN_USAGE_DISABLED; - else - if (USG_NONE(dev->usage[i])) { - dev->usage[i] |= ISDN_USAGE_DISABLED; - } - else - retval = -1; - break; - } - spin_unlock_irqrestore(&dev->lock, flags); - isdn_info_update(); - break; - case ISDN_STAT_UNLOAD: - while (dev->drv[di]->locks > 0) { - isdn_unlock_driver(dev->drv[di]); - } - spin_lock_irqsave(&dev->lock, flags); - isdn_tty_stat_callback(i, c); - for (i = 0; i < ISDN_MAX_CHANNELS; i++) - if (dev->drvmap[i] == di) { - dev->drvmap[i] = -1; - dev->chanmap[i] = -1; - dev->usage[i] &= ~ISDN_USAGE_DISABLED; - } - dev->drivers--; - dev->channels -= dev->drv[di]->channels; - kfree(dev->drv[di]->rcverr); - kfree(dev->drv[di]->rcvcount); - for (i = 0; i < dev->drv[di]->channels; i++) - skb_queue_purge(&dev->drv[di]->rpqueue[i]); - kfree(dev->drv[di]->rpqueue); - kfree(dev->drv[di]->rcv_waitq); - kfree(dev->drv[di]); - dev->drv[di] = NULL; - dev->drvid[di][0] = '\0'; - isdn_info_update(); - set_global_features(); - spin_unlock_irqrestore(&dev->lock, flags); - return 0; - case ISDN_STAT_L1ERR: - break; - case CAPI_PUT_MESSAGE: - return (isdn_capi_rec_hl_msg(&c->parm.cmsg)); -#ifdef CONFIG_ISDN_TTY_FAX - case ISDN_STAT_FAXIND: - isdn_tty_stat_callback(i, c); - break; -#endif -#ifdef CONFIG_ISDN_AUDIO - case ISDN_STAT_AUDIO: - isdn_tty_stat_callback(i, c); - break; -#endif -#ifdef CONFIG_ISDN_DIVERSION - case ISDN_STAT_PROT: - case ISDN_STAT_REDIR: - if (divert_if) - return (divert_if->stat_callback(c)); -#endif /* CONFIG_ISDN_DIVERSION */ - /* fall through */ - default: - return -1; - } - return 0; -} - -/* - * Get integer from char-pointer, set pointer to end of number - */ -int -isdn_getnum(char **p) -{ - int v = -1; - - while (*p[0] >= '0' && *p[0] <= '9') - v = ((v < 0) ? 0 : (v * 10)) + (int) ((*p[0]++) - '0'); - return v; -} - -#define DLE 0x10 - -/* - * isdn_readbchan() tries to get data from the read-queue. - * It MUST be called with interrupts off. - * - * Be aware that this is not an atomic operation when sleep != 0, even though - * interrupts are turned off! Well, like that we are currently only called - * on behalf of a read system call on raw device files (which are documented - * to be dangerous and for debugging purpose only). The inode semaphore - * takes care that this is not called for the same minor device number while - * we are sleeping, but access is not serialized against simultaneous read() - * from the corresponding ttyI device. Can other ugly events, like changes - * of the mapping (di,ch)<->minor, happen during the sleep? --he - */ -int -isdn_readbchan(int di, int channel, u_char *buf, u_char *fp, int len, wait_queue_head_t *sleep) -{ - int count; - int count_pull; - int count_put; - int dflag; - struct sk_buff *skb; - u_char *cp; - - if (!dev->drv[di]) - return 0; - if (skb_queue_empty(&dev->drv[di]->rpqueue[channel])) { - if (sleep) - wait_event_interruptible(*sleep, - !skb_queue_empty(&dev->drv[di]->rpqueue[channel])); - else - return 0; - } - if (len > dev->drv[di]->rcvcount[channel]) - len = dev->drv[di]->rcvcount[channel]; - cp = buf; - count = 0; - while (len) { - if (!(skb = skb_peek(&dev->drv[di]->rpqueue[channel]))) - break; -#ifdef CONFIG_ISDN_AUDIO - if (ISDN_AUDIO_SKB_LOCK(skb)) - break; - ISDN_AUDIO_SKB_LOCK(skb) = 1; - if ((ISDN_AUDIO_SKB_DLECOUNT(skb)) || (dev->drv[di]->DLEflag & (1 << channel))) { - char *p = skb->data; - unsigned long DLEmask = (1 << channel); - - dflag = 0; - count_pull = count_put = 0; - while ((count_pull < skb->len) && (len > 0)) { - len--; - if (dev->drv[di]->DLEflag & DLEmask) { - *cp++ = DLE; - dev->drv[di]->DLEflag &= ~DLEmask; - } else { - *cp++ = *p; - if (*p == DLE) { - dev->drv[di]->DLEflag |= DLEmask; - (ISDN_AUDIO_SKB_DLECOUNT(skb))--; - } - p++; - count_pull++; - } - count_put++; - } - if (count_pull >= skb->len) - dflag = 1; - } else { -#endif - /* No DLE's in buff, so simply copy it */ - dflag = 1; - if ((count_pull = skb->len) > len) { - count_pull = len; - dflag = 0; - } - count_put = count_pull; - skb_copy_from_linear_data(skb, cp, count_put); - cp += count_put; - len -= count_put; -#ifdef CONFIG_ISDN_AUDIO - } -#endif - count += count_put; - if (fp) { - memset(fp, 0, count_put); - fp += count_put; - } - if (dflag) { - /* We got all the data in this buff. - * Now we can dequeue it. - */ - if (fp) - *(fp - 1) = 0xff; -#ifdef CONFIG_ISDN_AUDIO - ISDN_AUDIO_SKB_LOCK(skb) = 0; -#endif - skb = skb_dequeue(&dev->drv[di]->rpqueue[channel]); - dev_kfree_skb(skb); - } else { - /* Not yet emptied this buff, so it - * must stay in the queue, for further calls - * but we pull off the data we got until now. - */ - skb_pull(skb, count_pull); -#ifdef CONFIG_ISDN_AUDIO - ISDN_AUDIO_SKB_LOCK(skb) = 0; -#endif - } - dev->drv[di]->rcvcount[channel] -= count_put; - } - return count; -} - -/* - * isdn_readbchan_tty() tries to get data from the read-queue. - * It MUST be called with interrupts off. - * - * Be aware that this is not an atomic operation when sleep != 0, even though - * interrupts are turned off! Well, like that we are currently only called - * on behalf of a read system call on raw device files (which are documented - * to be dangerous and for debugging purpose only). The inode semaphore - * takes care that this is not called for the same minor device number while - * we are sleeping, but access is not serialized against simultaneous read() - * from the corresponding ttyI device. Can other ugly events, like changes - * of the mapping (di,ch)<->minor, happen during the sleep? --he - */ -int -isdn_readbchan_tty(int di, int channel, struct tty_port *port, int cisco_hack) -{ - int count; - int count_pull; - int count_put; - int dflag; - struct sk_buff *skb; - char last = 0; - int len; - - if (!dev->drv[di]) - return 0; - if (skb_queue_empty(&dev->drv[di]->rpqueue[channel])) - return 0; - - len = tty_buffer_request_room(port, dev->drv[di]->rcvcount[channel]); - if (len == 0) - return len; - - count = 0; - while (len) { - if (!(skb = skb_peek(&dev->drv[di]->rpqueue[channel]))) - break; -#ifdef CONFIG_ISDN_AUDIO - if (ISDN_AUDIO_SKB_LOCK(skb)) - break; - ISDN_AUDIO_SKB_LOCK(skb) = 1; - if ((ISDN_AUDIO_SKB_DLECOUNT(skb)) || (dev->drv[di]->DLEflag & (1 << channel))) { - char *p = skb->data; - unsigned long DLEmask = (1 << channel); - - dflag = 0; - count_pull = count_put = 0; - while ((count_pull < skb->len) && (len > 0)) { - /* push every character but the last to the tty buffer directly */ - if (count_put) - tty_insert_flip_char(port, last, TTY_NORMAL); - len--; - if (dev->drv[di]->DLEflag & DLEmask) { - last = DLE; - dev->drv[di]->DLEflag &= ~DLEmask; - } else { - last = *p; - if (last == DLE) { - dev->drv[di]->DLEflag |= DLEmask; - (ISDN_AUDIO_SKB_DLECOUNT(skb))--; - } - p++; - count_pull++; - } - count_put++; - } - if (count_pull >= skb->len) - dflag = 1; - } else { -#endif - /* No DLE's in buff, so simply copy it */ - dflag = 1; - if ((count_pull = skb->len) > len) { - count_pull = len; - dflag = 0; - } - count_put = count_pull; - if (count_put > 1) - tty_insert_flip_string(port, skb->data, count_put - 1); - last = skb->data[count_put - 1]; - len -= count_put; -#ifdef CONFIG_ISDN_AUDIO - } -#endif - count += count_put; - if (dflag) { - /* We got all the data in this buff. - * Now we can dequeue it. - */ - if (cisco_hack) - tty_insert_flip_char(port, last, 0xFF); - else - tty_insert_flip_char(port, last, TTY_NORMAL); -#ifdef CONFIG_ISDN_AUDIO - ISDN_AUDIO_SKB_LOCK(skb) = 0; -#endif - skb = skb_dequeue(&dev->drv[di]->rpqueue[channel]); - dev_kfree_skb(skb); - } else { - tty_insert_flip_char(port, last, TTY_NORMAL); - /* Not yet emptied this buff, so it - * must stay in the queue, for further calls - * but we pull off the data we got until now. - */ - skb_pull(skb, count_pull); -#ifdef CONFIG_ISDN_AUDIO - ISDN_AUDIO_SKB_LOCK(skb) = 0; -#endif - } - dev->drv[di]->rcvcount[channel] -= count_put; - } - return count; -} - - -static inline int -isdn_minor2drv(int minor) -{ - return (dev->drvmap[minor]); -} - -static inline int -isdn_minor2chan(int minor) -{ - return (dev->chanmap[minor]); -} - -static char * -isdn_statstr(void) -{ - static char istatbuf[2048]; - char *p; - int i; - - sprintf(istatbuf, "idmap:\t"); - p = istatbuf + strlen(istatbuf); - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - sprintf(p, "%s ", (dev->drvmap[i] < 0) ? "-" : dev->drvid[dev->drvmap[i]]); - p = istatbuf + strlen(istatbuf); - } - sprintf(p, "\nchmap:\t"); - p = istatbuf + strlen(istatbuf); - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - sprintf(p, "%d ", dev->chanmap[i]); - p = istatbuf + strlen(istatbuf); - } - sprintf(p, "\ndrmap:\t"); - p = istatbuf + strlen(istatbuf); - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - sprintf(p, "%d ", dev->drvmap[i]); - p = istatbuf + strlen(istatbuf); - } - sprintf(p, "\nusage:\t"); - p = istatbuf + strlen(istatbuf); - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - sprintf(p, "%d ", dev->usage[i]); - p = istatbuf + strlen(istatbuf); - } - sprintf(p, "\nflags:\t"); - p = istatbuf + strlen(istatbuf); - for (i = 0; i < ISDN_MAX_DRIVERS; i++) { - if (dev->drv[i]) { - sprintf(p, "%ld ", dev->drv[i]->online); - p = istatbuf + strlen(istatbuf); - } else { - sprintf(p, "? "); - p = istatbuf + strlen(istatbuf); - } - } - sprintf(p, "\nphone:\t"); - p = istatbuf + strlen(istatbuf); - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - sprintf(p, "%s ", dev->num[i]); - p = istatbuf + strlen(istatbuf); - } - sprintf(p, "\n"); - return istatbuf; -} - -/* Module interface-code */ - -void -isdn_info_update(void) -{ - infostruct *p = dev->infochain; - - while (p) { - *(p->private) = 1; - p = (infostruct *) p->next; - } - wake_up_interruptible(&(dev->info_waitq)); -} - -static ssize_t -isdn_read(struct file *file, char __user *buf, size_t count, loff_t *off) -{ - uint minor = iminor(file_inode(file)); - int len = 0; - int drvidx; - int chidx; - int retval; - char *p; - - mutex_lock(&isdn_mutex); - if (minor == ISDN_MINOR_STATUS) { - if (!file->private_data) { - if (file->f_flags & O_NONBLOCK) { - retval = -EAGAIN; - goto out; - } - wait_event_interruptible(dev->info_waitq, - file->private_data); - } - p = isdn_statstr(); - file->private_data = NULL; - if ((len = strlen(p)) <= count) { - if (copy_to_user(buf, p, len)) { - retval = -EFAULT; - goto out; - } - *off += len; - retval = len; - goto out; - } - retval = 0; - goto out; - } - if (!dev->drivers) { - retval = -ENODEV; - goto out; - } - if (minor <= ISDN_MINOR_BMAX) { - printk(KERN_WARNING "isdn_read minor %d obsolete!\n", minor); - drvidx = isdn_minor2drv(minor); - if (drvidx < 0) { - retval = -ENODEV; - goto out; - } - if (!(dev->drv[drvidx]->flags & DRV_FLAG_RUNNING)) { - retval = -ENODEV; - goto out; - } - chidx = isdn_minor2chan(minor); - if (!(p = kmalloc(count, GFP_KERNEL))) { - retval = -ENOMEM; - goto out; - } - len = isdn_readbchan(drvidx, chidx, p, NULL, count, - &dev->drv[drvidx]->rcv_waitq[chidx]); - *off += len; - if (copy_to_user(buf, p, len)) - len = -EFAULT; - kfree(p); - retval = len; - goto out; - } - if (minor <= ISDN_MINOR_CTRLMAX) { - drvidx = isdn_minor2drv(minor - ISDN_MINOR_CTRL); - if (drvidx < 0) { - retval = -ENODEV; - goto out; - } - if (!dev->drv[drvidx]->stavail) { - if (file->f_flags & O_NONBLOCK) { - retval = -EAGAIN; - goto out; - } - wait_event_interruptible(dev->drv[drvidx]->st_waitq, - dev->drv[drvidx]->stavail); - } - if (dev->drv[drvidx]->interface->readstat) { - if (count > dev->drv[drvidx]->stavail) - count = dev->drv[drvidx]->stavail; - len = dev->drv[drvidx]->interface->readstat(buf, count, - drvidx, isdn_minor2chan(minor - ISDN_MINOR_CTRL)); - if (len < 0) { - retval = len; - goto out; - } - } else { - len = 0; - } - if (len) - dev->drv[drvidx]->stavail -= len; - else - dev->drv[drvidx]->stavail = 0; - *off += len; - retval = len; - goto out; - } -#ifdef CONFIG_ISDN_PPP - if (minor <= ISDN_MINOR_PPPMAX) { - retval = isdn_ppp_read(minor - ISDN_MINOR_PPP, file, buf, count); - goto out; - } -#endif - retval = -ENODEV; -out: - mutex_unlock(&isdn_mutex); - return retval; -} - -static ssize_t -isdn_write(struct file *file, const char __user *buf, size_t count, loff_t *off) -{ - uint minor = iminor(file_inode(file)); - int drvidx; - int chidx; - int retval; - - if (minor == ISDN_MINOR_STATUS) - return -EPERM; - if (!dev->drivers) - return -ENODEV; - - mutex_lock(&isdn_mutex); - if (minor <= ISDN_MINOR_BMAX) { - printk(KERN_WARNING "isdn_write minor %d obsolete!\n", minor); - drvidx = isdn_minor2drv(minor); - if (drvidx < 0) { - retval = -ENODEV; - goto out; - } - if (!(dev->drv[drvidx]->flags & DRV_FLAG_RUNNING)) { - retval = -ENODEV; - goto out; - } - chidx = isdn_minor2chan(minor); - wait_event_interruptible(dev->drv[drvidx]->snd_waitq[chidx], - (retval = isdn_writebuf_stub(drvidx, chidx, buf, count))); - goto out; - } - if (minor <= ISDN_MINOR_CTRLMAX) { - drvidx = isdn_minor2drv(minor - ISDN_MINOR_CTRL); - if (drvidx < 0) { - retval = -ENODEV; - goto out; - } - /* - * We want to use the isdnctrl device to load the firmware - * - if (!(dev->drv[drvidx]->flags & DRV_FLAG_RUNNING)) - return -ENODEV; - */ - if (dev->drv[drvidx]->interface->writecmd) - retval = dev->drv[drvidx]->interface-> - writecmd(buf, count, drvidx, - isdn_minor2chan(minor - ISDN_MINOR_CTRL)); - else - retval = count; - goto out; - } -#ifdef CONFIG_ISDN_PPP - if (minor <= ISDN_MINOR_PPPMAX) { - retval = isdn_ppp_write(minor - ISDN_MINOR_PPP, file, buf, count); - goto out; - } -#endif - retval = -ENODEV; -out: - mutex_unlock(&isdn_mutex); - return retval; -} - -static __poll_t -isdn_poll(struct file *file, poll_table *wait) -{ - __poll_t mask = 0; - unsigned int minor = iminor(file_inode(file)); - int drvidx = isdn_minor2drv(minor - ISDN_MINOR_CTRL); - - mutex_lock(&isdn_mutex); - if (minor == ISDN_MINOR_STATUS) { - poll_wait(file, &(dev->info_waitq), wait); - /* mask = EPOLLOUT | EPOLLWRNORM; */ - if (file->private_data) { - mask |= EPOLLIN | EPOLLRDNORM; - } - goto out; - } - if (minor >= ISDN_MINOR_CTRL && minor <= ISDN_MINOR_CTRLMAX) { - if (drvidx < 0) { - /* driver deregistered while file open */ - mask = EPOLLHUP; - goto out; - } - poll_wait(file, &(dev->drv[drvidx]->st_waitq), wait); - mask = EPOLLOUT | EPOLLWRNORM; - if (dev->drv[drvidx]->stavail) { - mask |= EPOLLIN | EPOLLRDNORM; - } - goto out; - } -#ifdef CONFIG_ISDN_PPP - if (minor <= ISDN_MINOR_PPPMAX) { - mask = isdn_ppp_poll(file, wait); - goto out; - } -#endif - mask = EPOLLERR; -out: - mutex_unlock(&isdn_mutex); - return mask; -} - - -static int -isdn_ioctl(struct file *file, uint cmd, ulong arg) -{ - uint minor = iminor(file_inode(file)); - isdn_ctrl c; - int drvidx; - int ret; - int i; - char __user *p; - char *s; - union iocpar { - char name[10]; - char bname[22]; - isdn_ioctl_struct iocts; - isdn_net_ioctl_phone phone; - isdn_net_ioctl_cfg cfg; - } iocpar; - void __user *argp = (void __user *)arg; - -#define name iocpar.name -#define bname iocpar.bname -#define iocts iocpar.iocts -#define phone iocpar.phone -#define cfg iocpar.cfg - - if (minor == ISDN_MINOR_STATUS) { - switch (cmd) { - case IIOCGETDVR: - return (TTY_DV + - (NET_DV << 8) + - (INF_DV << 16)); - case IIOCGETCPS: - if (arg) { - ulong __user *p = argp; - int i; - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - put_user(dev->ibytes[i], p++); - put_user(dev->obytes[i], p++); - } - return 0; - } else - return -EINVAL; - break; - case IIOCNETGPN: - /* Get peer phone number of a connected - * isdn network interface */ - if (arg) { - if (copy_from_user(&phone, argp, sizeof(phone))) - return -EFAULT; - return isdn_net_getpeer(&phone, argp); - } else - return -EINVAL; - default: - return -EINVAL; - } - } - if (!dev->drivers) - return -ENODEV; - if (minor <= ISDN_MINOR_BMAX) { - drvidx = isdn_minor2drv(minor); - if (drvidx < 0) - return -ENODEV; - if (!(dev->drv[drvidx]->flags & DRV_FLAG_RUNNING)) - return -ENODEV; - return 0; - } - if (minor <= ISDN_MINOR_CTRLMAX) { -/* - * isdn net devices manage lots of configuration variables as linked lists. - * Those lists must only be manipulated from user space. Some of the ioctl's - * service routines access user space and are not atomic. Therefore, ioctl's - * manipulating the lists and ioctl's sleeping while accessing the lists - * are serialized by means of a semaphore. - */ - switch (cmd) { - case IIOCNETDWRSET: - printk(KERN_INFO "INFO: ISDN_DW_ABC_EXTENSION not enabled\n"); - return (-EINVAL); - case IIOCNETLCR: - printk(KERN_INFO "INFO: ISDN_ABC_LCR_SUPPORT not enabled\n"); - return -ENODEV; - case IIOCNETAIF: - /* Add a network-interface */ - if (arg) { - if (copy_from_user(name, argp, sizeof(name))) - return -EFAULT; - s = name; - } else { - s = NULL; - } - ret = mutex_lock_interruptible(&dev->mtx); - if (ret) return ret; - if ((s = isdn_net_new(s, NULL))) { - if (copy_to_user(argp, s, strlen(s) + 1)) { - ret = -EFAULT; - } else { - ret = 0; - } - } else - ret = -ENODEV; - mutex_unlock(&dev->mtx); - return ret; - case IIOCNETASL: - /* Add a slave to a network-interface */ - if (arg) { - if (copy_from_user(bname, argp, sizeof(bname) - 1)) - return -EFAULT; - bname[sizeof(bname)-1] = 0; - } else - return -EINVAL; - ret = mutex_lock_interruptible(&dev->mtx); - if (ret) return ret; - if ((s = isdn_net_newslave(bname))) { - if (copy_to_user(argp, s, strlen(s) + 1)) { - ret = -EFAULT; - } else { - ret = 0; - } - } else - ret = -ENODEV; - mutex_unlock(&dev->mtx); - return ret; - case IIOCNETDIF: - /* Delete a network-interface */ - if (arg) { - if (copy_from_user(name, argp, sizeof(name))) - return -EFAULT; - ret = mutex_lock_interruptible(&dev->mtx); - if (ret) return ret; - ret = isdn_net_rm(name); - mutex_unlock(&dev->mtx); - return ret; - } else - return -EINVAL; - case IIOCNETSCF: - /* Set configurable parameters of a network-interface */ - if (arg) { - if (copy_from_user(&cfg, argp, sizeof(cfg))) - return -EFAULT; - return isdn_net_setcfg(&cfg); - } else - return -EINVAL; - case IIOCNETGCF: - /* Get configurable parameters of a network-interface */ - if (arg) { - if (copy_from_user(&cfg, argp, sizeof(cfg))) - return -EFAULT; - if (!(ret = isdn_net_getcfg(&cfg))) { - if (copy_to_user(argp, &cfg, sizeof(cfg))) - return -EFAULT; - } - return ret; - } else - return -EINVAL; - case IIOCNETANM: - /* Add a phone-number to a network-interface */ - if (arg) { - if (copy_from_user(&phone, argp, sizeof(phone))) - return -EFAULT; - ret = mutex_lock_interruptible(&dev->mtx); - if (ret) return ret; - ret = isdn_net_addphone(&phone); - mutex_unlock(&dev->mtx); - return ret; - } else - return -EINVAL; - case IIOCNETGNM: - /* Get list of phone-numbers of a network-interface */ - if (arg) { - if (copy_from_user(&phone, argp, sizeof(phone))) - return -EFAULT; - ret = mutex_lock_interruptible(&dev->mtx); - if (ret) return ret; - ret = isdn_net_getphones(&phone, argp); - mutex_unlock(&dev->mtx); - return ret; - } else - return -EINVAL; - case IIOCNETDNM: - /* Delete a phone-number of a network-interface */ - if (arg) { - if (copy_from_user(&phone, argp, sizeof(phone))) - return -EFAULT; - ret = mutex_lock_interruptible(&dev->mtx); - if (ret) return ret; - ret = isdn_net_delphone(&phone); - mutex_unlock(&dev->mtx); - return ret; - } else - return -EINVAL; - case IIOCNETDIL: - /* Force dialing of a network-interface */ - if (arg) { - if (copy_from_user(name, argp, sizeof(name))) - return -EFAULT; - return isdn_net_force_dial(name); - } else - return -EINVAL; -#ifdef CONFIG_ISDN_PPP - case IIOCNETALN: - if (!arg) - return -EINVAL; - if (copy_from_user(name, argp, sizeof(name))) - return -EFAULT; - return isdn_ppp_dial_slave(name); - case IIOCNETDLN: - if (!arg) - return -EINVAL; - if (copy_from_user(name, argp, sizeof(name))) - return -EFAULT; - return isdn_ppp_hangup_slave(name); -#endif - case IIOCNETHUP: - /* Force hangup of a network-interface */ - if (!arg) - return -EINVAL; - if (copy_from_user(name, argp, sizeof(name))) - return -EFAULT; - return isdn_net_force_hangup(name); - break; - case IIOCSETVER: - dev->net_verbose = arg; - printk(KERN_INFO "isdn: Verbose-Level is %d\n", dev->net_verbose); - return 0; - case IIOCSETGST: - if (arg) - dev->global_flags |= ISDN_GLOBAL_STOPPED; - else - dev->global_flags &= ~ISDN_GLOBAL_STOPPED; - printk(KERN_INFO "isdn: Global Mode %s\n", - (dev->global_flags & ISDN_GLOBAL_STOPPED) ? "stopped" : "running"); - return 0; - case IIOCSETBRJ: - drvidx = -1; - if (arg) { - int i; - char *p; - if (copy_from_user(&iocts, argp, - sizeof(isdn_ioctl_struct))) - return -EFAULT; - iocts.drvid[sizeof(iocts.drvid) - 1] = 0; - if (strlen(iocts.drvid)) { - if ((p = strchr(iocts.drvid, ','))) - *p = 0; - drvidx = -1; - for (i = 0; i < ISDN_MAX_DRIVERS; i++) - if (!(strcmp(dev->drvid[i], iocts.drvid))) { - drvidx = i; - break; - } - } - } - if (drvidx == -1) - return -ENODEV; - if (iocts.arg) - dev->drv[drvidx]->flags |= DRV_FLAG_REJBUS; - else - dev->drv[drvidx]->flags &= ~DRV_FLAG_REJBUS; - return 0; - case IIOCSIGPRF: - dev->profd = current; - return 0; - break; - case IIOCGETPRF: - /* Get all Modem-Profiles */ - if (arg) { - char __user *p = argp; - int i; - - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - if (copy_to_user(p, dev->mdm.info[i].emu.profile, - ISDN_MODEM_NUMREG)) - return -EFAULT; - p += ISDN_MODEM_NUMREG; - if (copy_to_user(p, dev->mdm.info[i].emu.pmsn, ISDN_MSNLEN)) - return -EFAULT; - p += ISDN_MSNLEN; - if (copy_to_user(p, dev->mdm.info[i].emu.plmsn, ISDN_LMSNLEN)) - return -EFAULT; - p += ISDN_LMSNLEN; - } - return (ISDN_MODEM_NUMREG + ISDN_MSNLEN + ISDN_LMSNLEN) * ISDN_MAX_CHANNELS; - } else - return -EINVAL; - break; - case IIOCSETPRF: - /* Set all Modem-Profiles */ - if (arg) { - char __user *p = argp; - int i; - - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - if (copy_from_user(dev->mdm.info[i].emu.profile, p, - ISDN_MODEM_NUMREG)) - return -EFAULT; - p += ISDN_MODEM_NUMREG; - if (copy_from_user(dev->mdm.info[i].emu.plmsn, p, ISDN_LMSNLEN)) - return -EFAULT; - p += ISDN_LMSNLEN; - if (copy_from_user(dev->mdm.info[i].emu.pmsn, p, ISDN_MSNLEN)) - return -EFAULT; - p += ISDN_MSNLEN; - } - return 0; - } else - return -EINVAL; - break; - case IIOCSETMAP: - case IIOCGETMAP: - /* Set/Get MSN->EAZ-Mapping for a driver */ - if (arg) { - - if (copy_from_user(&iocts, argp, - sizeof(isdn_ioctl_struct))) - return -EFAULT; - iocts.drvid[sizeof(iocts.drvid) - 1] = 0; - if (strlen(iocts.drvid)) { - drvidx = -1; - for (i = 0; i < ISDN_MAX_DRIVERS; i++) - if (!(strcmp(dev->drvid[i], iocts.drvid))) { - drvidx = i; - break; - } - } else - drvidx = 0; - if (drvidx == -1) - return -ENODEV; - if (cmd == IIOCSETMAP) { - int loop = 1; - - p = (char __user *) iocts.arg; - i = 0; - while (loop) { - int j = 0; - - while (1) { - get_user(bname[j], p++); - switch (bname[j]) { - case '\0': - loop = 0; - /* Fall through */ - case ',': - bname[j] = '\0'; - strcpy(dev->drv[drvidx]->msn2eaz[i], bname); - j = ISDN_MSNLEN; - break; - default: - j++; - } - if (j >= ISDN_MSNLEN) - break; - } - if (++i > 9) - break; - } - } else { - p = (char __user *) iocts.arg; - for (i = 0; i < 10; i++) { - snprintf(bname, sizeof(bname), "%s%s", - strlen(dev->drv[drvidx]->msn2eaz[i]) ? - dev->drv[drvidx]->msn2eaz[i] : "_", - (i < 9) ? "," : "\0"); - if (copy_to_user(p, bname, strlen(bname) + 1)) - return -EFAULT; - p += strlen(bname); - } - } - return 0; - } else - return -EINVAL; - case IIOCDBGVAR: - return -EINVAL; - default: - if ((cmd & IIOCDRVCTL) == IIOCDRVCTL) - cmd = ((cmd >> _IOC_NRSHIFT) & _IOC_NRMASK) & ISDN_DRVIOCTL_MASK; - else - return -EINVAL; - if (arg) { - int i; - char *p; - if (copy_from_user(&iocts, argp, sizeof(isdn_ioctl_struct))) - return -EFAULT; - iocts.drvid[sizeof(iocts.drvid) - 1] = 0; - if (strlen(iocts.drvid)) { - if ((p = strchr(iocts.drvid, ','))) - *p = 0; - drvidx = -1; - for (i = 0; i < ISDN_MAX_DRIVERS; i++) - if (!(strcmp(dev->drvid[i], iocts.drvid))) { - drvidx = i; - break; - } - } else - drvidx = 0; - if (drvidx == -1) - return -ENODEV; - c.driver = drvidx; - c.command = ISDN_CMD_IOCTL; - c.arg = cmd; - memcpy(c.parm.num, &iocts.arg, sizeof(ulong)); - ret = isdn_command(&c); - memcpy(&iocts.arg, c.parm.num, sizeof(ulong)); - if (copy_to_user(argp, &iocts, sizeof(isdn_ioctl_struct))) - return -EFAULT; - return ret; - } else - return -EINVAL; - } - } -#ifdef CONFIG_ISDN_PPP - if (minor <= ISDN_MINOR_PPPMAX) - return (isdn_ppp_ioctl(minor - ISDN_MINOR_PPP, file, cmd, arg)); -#endif - return -ENODEV; - -#undef name -#undef bname -#undef iocts -#undef phone -#undef cfg -} - -static long -isdn_unlocked_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - int ret; - - mutex_lock(&isdn_mutex); - ret = isdn_ioctl(file, cmd, arg); - mutex_unlock(&isdn_mutex); - - return ret; -} - -/* - * Open the device code. - */ -static int -isdn_open(struct inode *ino, struct file *filep) -{ - uint minor = iminor(ino); - int drvidx; - int chidx; - int retval = -ENODEV; - - mutex_lock(&isdn_mutex); - if (minor == ISDN_MINOR_STATUS) { - infostruct *p; - - if ((p = kmalloc(sizeof(infostruct), GFP_KERNEL))) { - p->next = (char *) dev->infochain; - p->private = (char *) &(filep->private_data); - dev->infochain = p; - /* At opening we allow a single update */ - filep->private_data = (char *) 1; - retval = 0; - goto out; - } else { - retval = -ENOMEM; - goto out; - } - } - if (!dev->channels) - goto out; - if (minor <= ISDN_MINOR_BMAX) { - printk(KERN_WARNING "isdn_open minor %d obsolete!\n", minor); - drvidx = isdn_minor2drv(minor); - if (drvidx < 0) - goto out; - chidx = isdn_minor2chan(minor); - if (!(dev->drv[drvidx]->flags & DRV_FLAG_RUNNING)) - goto out; - if (!(dev->drv[drvidx]->online & (1 << chidx))) - goto out; - isdn_lock_drivers(); - retval = 0; - goto out; - } - if (minor <= ISDN_MINOR_CTRLMAX) { - drvidx = isdn_minor2drv(minor - ISDN_MINOR_CTRL); - if (drvidx < 0) - goto out; - isdn_lock_drivers(); - retval = 0; - goto out; - } -#ifdef CONFIG_ISDN_PPP - if (minor <= ISDN_MINOR_PPPMAX) { - retval = isdn_ppp_open(minor - ISDN_MINOR_PPP, filep); - if (retval == 0) - isdn_lock_drivers(); - goto out; - } -#endif -out: - nonseekable_open(ino, filep); - mutex_unlock(&isdn_mutex); - return retval; -} - -static int -isdn_close(struct inode *ino, struct file *filep) -{ - uint minor = iminor(ino); - - mutex_lock(&isdn_mutex); - if (minor == ISDN_MINOR_STATUS) { - infostruct *p = dev->infochain; - infostruct *q = NULL; - - while (p) { - if (p->private == (char *) &(filep->private_data)) { - if (q) - q->next = p->next; - else - dev->infochain = (infostruct *) (p->next); - kfree(p); - goto out; - } - q = p; - p = (infostruct *) (p->next); - } - printk(KERN_WARNING "isdn: No private data while closing isdnctrl\n"); - goto out; - } - isdn_unlock_drivers(); - if (minor <= ISDN_MINOR_BMAX) - goto out; - if (minor <= ISDN_MINOR_CTRLMAX) { - if (dev->profd == current) - dev->profd = NULL; - goto out; - } -#ifdef CONFIG_ISDN_PPP - if (minor <= ISDN_MINOR_PPPMAX) - isdn_ppp_release(minor - ISDN_MINOR_PPP, filep); -#endif - -out: - mutex_unlock(&isdn_mutex); - return 0; -} - -static const struct file_operations isdn_fops = -{ - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = isdn_read, - .write = isdn_write, - .poll = isdn_poll, - .unlocked_ioctl = isdn_unlocked_ioctl, - .open = isdn_open, - .release = isdn_close, -}; - -char * -isdn_map_eaz2msn(char *msn, int di) -{ - isdn_driver_t *this = dev->drv[di]; - int i; - - if (strlen(msn) == 1) { - i = msn[0] - '0'; - if ((i >= 0) && (i <= 9)) - if (strlen(this->msn2eaz[i])) - return (this->msn2eaz[i]); - } - return (msn); -} - -/* - * Find an unused ISDN-channel, whose feature-flags match the - * given L2- and L3-protocols. - */ -#define L2V (~(ISDN_FEATURE_L2_V11096 | ISDN_FEATURE_L2_V11019 | ISDN_FEATURE_L2_V11038)) - -/* - * This function must be called with holding the dev->lock. - */ -int -isdn_get_free_channel(int usage, int l2_proto, int l3_proto, int pre_dev - , int pre_chan, char *msn) -{ - int i; - ulong features; - ulong vfeatures; - - features = ((1 << l2_proto) | (0x10000 << l3_proto)); - vfeatures = (((1 << l2_proto) | (0x10000 << l3_proto)) & - ~(ISDN_FEATURE_L2_V11096 | ISDN_FEATURE_L2_V11019 | ISDN_FEATURE_L2_V11038)); - /* If Layer-2 protocol is V.110, accept drivers with - * transparent feature even if these don't support V.110 - * because we can emulate this in linklevel. - */ - for (i = 0; i < ISDN_MAX_CHANNELS; i++) - if (USG_NONE(dev->usage[i]) && - (dev->drvmap[i] != -1)) { - int d = dev->drvmap[i]; - if ((dev->usage[i] & ISDN_USAGE_EXCLUSIVE) && - ((pre_dev != d) || (pre_chan != dev->chanmap[i]))) - continue; - if (!strcmp(isdn_map_eaz2msn(msn, d), "-")) - continue; - if (dev->usage[i] & ISDN_USAGE_DISABLED) - continue; /* usage not allowed */ - if (dev->drv[d]->flags & DRV_FLAG_RUNNING) { - if (((dev->drv[d]->interface->features & features) == features) || - (((dev->drv[d]->interface->features & vfeatures) == vfeatures) && - (dev->drv[d]->interface->features & ISDN_FEATURE_L2_TRANS))) { - if ((pre_dev < 0) || (pre_chan < 0)) { - dev->usage[i] &= ISDN_USAGE_EXCLUSIVE; - dev->usage[i] |= usage; - isdn_info_update(); - return i; - } else { - if ((pre_dev == d) && (pre_chan == dev->chanmap[i])) { - dev->usage[i] &= ISDN_USAGE_EXCLUSIVE; - dev->usage[i] |= usage; - isdn_info_update(); - return i; - } - } - } - } - } - return -1; -} - -/* - * Set state of ISDN-channel to 'unused' - */ -void -isdn_free_channel(int di, int ch, int usage) -{ - int i; - - if ((di < 0) || (ch < 0)) { - printk(KERN_WARNING "%s: called with invalid drv(%d) or channel(%d)\n", - __func__, di, ch); - return; - } - for (i = 0; i < ISDN_MAX_CHANNELS; i++) - if (((!usage) || ((dev->usage[i] & ISDN_USAGE_MASK) == usage)) && - (dev->drvmap[i] == di) && - (dev->chanmap[i] == ch)) { - dev->usage[i] &= (ISDN_USAGE_NONE | ISDN_USAGE_EXCLUSIVE); - strcpy(dev->num[i], "???"); - dev->ibytes[i] = 0; - dev->obytes[i] = 0; -// 20.10.99 JIM, try to reinitialize v110 ! - dev->v110emu[i] = 0; - atomic_set(&(dev->v110use[i]), 0); - isdn_v110_close(dev->v110[i]); - dev->v110[i] = NULL; -// 20.10.99 JIM, try to reinitialize v110 ! - isdn_info_update(); - if (dev->drv[di]) - skb_queue_purge(&dev->drv[di]->rpqueue[ch]); - } -} - -/* - * Cancel Exclusive-Flag for ISDN-channel - */ -void -isdn_unexclusive_channel(int di, int ch) -{ - int i; - - for (i = 0; i < ISDN_MAX_CHANNELS; i++) - if ((dev->drvmap[i] == di) && - (dev->chanmap[i] == ch)) { - dev->usage[i] &= ~ISDN_USAGE_EXCLUSIVE; - isdn_info_update(); - return; - } -} - -/* - * writebuf replacement for SKB_ABLE drivers - */ -static int -isdn_writebuf_stub(int drvidx, int chan, const u_char __user *buf, int len) -{ - int ret; - int hl = dev->drv[drvidx]->interface->hl_hdrlen; - struct sk_buff *skb = alloc_skb(hl + len, GFP_ATOMIC); - - if (!skb) - return -ENOMEM; - skb_reserve(skb, hl); - if (copy_from_user(skb_put(skb, len), buf, len)) { - dev_kfree_skb(skb); - return -EFAULT; - } - ret = dev->drv[drvidx]->interface->writebuf_skb(drvidx, chan, 1, skb); - if (ret <= 0) - dev_kfree_skb(skb); - if (ret > 0) - dev->obytes[isdn_dc2minor(drvidx, chan)] += ret; - return ret; -} - -/* - * Return: length of data on success, -ERRcode on failure. - */ -int -isdn_writebuf_skb_stub(int drvidx, int chan, int ack, struct sk_buff *skb) -{ - int ret; - struct sk_buff *nskb = NULL; - int v110_ret = skb->len; - int idx = isdn_dc2minor(drvidx, chan); - - if (dev->v110[idx]) { - atomic_inc(&dev->v110use[idx]); - nskb = isdn_v110_encode(dev->v110[idx], skb); - atomic_dec(&dev->v110use[idx]); - if (!nskb) - return 0; - v110_ret = *((int *)nskb->data); - skb_pull(nskb, sizeof(int)); - if (!nskb->len) { - dev_kfree_skb(nskb); - return v110_ret; - } - /* V.110 must always be acknowledged */ - ack = 1; - ret = dev->drv[drvidx]->interface->writebuf_skb(drvidx, chan, ack, nskb); - } else { - int hl = dev->drv[drvidx]->interface->hl_hdrlen; - - if (skb_headroom(skb) < hl) { - /* - * This should only occur when new HL driver with - * increased hl_hdrlen was loaded after netdevice - * was created and connected to the new driver. - * - * The V.110 branch (re-allocates on its own) does - * not need this - */ - struct sk_buff *skb_tmp; - - skb_tmp = skb_realloc_headroom(skb, hl); - printk(KERN_DEBUG "isdn_writebuf_skb_stub: reallocating headroom%s\n", skb_tmp ? "" : " failed"); - if (!skb_tmp) return -ENOMEM; /* 0 better? */ - ret = dev->drv[drvidx]->interface->writebuf_skb(drvidx, chan, ack, skb_tmp); - if (ret > 0) { - dev_kfree_skb(skb); - } else { - dev_kfree_skb(skb_tmp); - } - } else { - ret = dev->drv[drvidx]->interface->writebuf_skb(drvidx, chan, ack, skb); - } - } - if (ret > 0) { - dev->obytes[idx] += ret; - if (dev->v110[idx]) { - atomic_inc(&dev->v110use[idx]); - dev->v110[idx]->skbuser++; - atomic_dec(&dev->v110use[idx]); - /* For V.110 return unencoded data length */ - ret = v110_ret; - /* if the complete frame was send we free the skb; - if not upper function will requeue the skb */ - if (ret == skb->len) - dev_kfree_skb(skb); - } - } else - if (dev->v110[idx]) - dev_kfree_skb(nskb); - return ret; -} - -static int -isdn_add_channels(isdn_driver_t *d, int drvidx, int n, int adding) -{ - int j, k, m; - - init_waitqueue_head(&d->st_waitq); - if (d->flags & DRV_FLAG_RUNNING) - return -1; - if (n < 1) return 0; - - m = (adding) ? d->channels + n : n; - - if (dev->channels + n > ISDN_MAX_CHANNELS) { - printk(KERN_WARNING "register_isdn: Max. %d channels supported\n", - ISDN_MAX_CHANNELS); - return -1; - } - - if ((adding) && (d->rcverr)) - kfree(d->rcverr); - if (!(d->rcverr = kcalloc(m, sizeof(int), GFP_ATOMIC))) { - printk(KERN_WARNING "register_isdn: Could not alloc rcverr\n"); - return -1; - } - - if ((adding) && (d->rcvcount)) - kfree(d->rcvcount); - if (!(d->rcvcount = kcalloc(m, sizeof(int), GFP_ATOMIC))) { - printk(KERN_WARNING "register_isdn: Could not alloc rcvcount\n"); - if (!adding) - kfree(d->rcverr); - return -1; - } - - if ((adding) && (d->rpqueue)) { - for (j = 0; j < d->channels; j++) - skb_queue_purge(&d->rpqueue[j]); - kfree(d->rpqueue); - } - d->rpqueue = kmalloc_array(m, sizeof(struct sk_buff_head), GFP_ATOMIC); - if (!d->rpqueue) { - printk(KERN_WARNING "register_isdn: Could not alloc rpqueue\n"); - if (!adding) { - kfree(d->rcvcount); - kfree(d->rcverr); - } - return -1; - } - for (j = 0; j < m; j++) { - skb_queue_head_init(&d->rpqueue[j]); - } - - if ((adding) && (d->rcv_waitq)) - kfree(d->rcv_waitq); - d->rcv_waitq = kmalloc(array3_size(sizeof(wait_queue_head_t), 2, m), - GFP_ATOMIC); - if (!d->rcv_waitq) { - printk(KERN_WARNING "register_isdn: Could not alloc rcv_waitq\n"); - if (!adding) { - kfree(d->rpqueue); - kfree(d->rcvcount); - kfree(d->rcverr); - } - return -1; - } - d->snd_waitq = d->rcv_waitq + m; - for (j = 0; j < m; j++) { - init_waitqueue_head(&d->rcv_waitq[j]); - init_waitqueue_head(&d->snd_waitq[j]); - } - - dev->channels += n; - for (j = d->channels; j < m; j++) - for (k = 0; k < ISDN_MAX_CHANNELS; k++) - if (dev->chanmap[k] < 0) { - dev->chanmap[k] = j; - dev->drvmap[k] = drvidx; - break; - } - d->channels = m; - return 0; -} - -/* - * Low-level-driver registration - */ - -static void -set_global_features(void) -{ - int drvidx; - - dev->global_features = 0; - for (drvidx = 0; drvidx < ISDN_MAX_DRIVERS; drvidx++) { - if (!dev->drv[drvidx]) - continue; - if (dev->drv[drvidx]->interface) - dev->global_features |= dev->drv[drvidx]->interface->features; - } -} - -#ifdef CONFIG_ISDN_DIVERSION - -static char *map_drvname(int di) -{ - if ((di < 0) || (di >= ISDN_MAX_DRIVERS)) - return (NULL); - return (dev->drvid[di]); /* driver name */ -} /* map_drvname */ - -static int map_namedrv(char *id) -{ int i; - - for (i = 0; i < ISDN_MAX_DRIVERS; i++) - { if (!strcmp(dev->drvid[i], id)) - return (i); - } - return (-1); -} /* map_namedrv */ - -int DIVERT_REG_NAME(isdn_divert_if *i_div) -{ - if (i_div->if_magic != DIVERT_IF_MAGIC) - return (DIVERT_VER_ERR); - switch (i_div->cmd) - { - case DIVERT_CMD_REL: - if (divert_if != i_div) - return (DIVERT_REL_ERR); - divert_if = NULL; /* free interface */ - return (DIVERT_NO_ERR); - - case DIVERT_CMD_REG: - if (divert_if) - return (DIVERT_REG_ERR); - i_div->ll_cmd = isdn_command; /* set command function */ - i_div->drv_to_name = map_drvname; - i_div->name_to_drv = map_namedrv; - divert_if = i_div; /* remember interface */ - return (DIVERT_NO_ERR); - - default: - return (DIVERT_CMD_ERR); - } -} /* DIVERT_REG_NAME */ - -EXPORT_SYMBOL(DIVERT_REG_NAME); - -#endif /* CONFIG_ISDN_DIVERSION */ - - -EXPORT_SYMBOL(register_isdn); -#ifdef CONFIG_ISDN_PPP -EXPORT_SYMBOL(isdn_ppp_register_compressor); -EXPORT_SYMBOL(isdn_ppp_unregister_compressor); -#endif - -int -register_isdn(isdn_if *i) -{ - isdn_driver_t *d; - int j; - ulong flags; - int drvidx; - - if (dev->drivers >= ISDN_MAX_DRIVERS) { - printk(KERN_WARNING "register_isdn: Max. %d drivers supported\n", - ISDN_MAX_DRIVERS); - return 0; - } - if (!i->writebuf_skb) { - printk(KERN_WARNING "register_isdn: No write routine given.\n"); - return 0; - } - if (!(d = kzalloc(sizeof(isdn_driver_t), GFP_KERNEL))) { - printk(KERN_WARNING "register_isdn: Could not alloc driver-struct\n"); - return 0; - } - - d->maxbufsize = i->maxbufsize; - d->pktcount = 0; - d->stavail = 0; - d->flags = DRV_FLAG_LOADED; - d->online = 0; - d->interface = i; - d->channels = 0; - spin_lock_irqsave(&dev->lock, flags); - for (drvidx = 0; drvidx < ISDN_MAX_DRIVERS; drvidx++) - if (!dev->drv[drvidx]) - break; - if (isdn_add_channels(d, drvidx, i->channels, 0)) { - spin_unlock_irqrestore(&dev->lock, flags); - kfree(d); - return 0; - } - i->channels = drvidx; - i->rcvcallb_skb = isdn_receive_skb_callback; - i->statcallb = isdn_status_callback; - if (!strlen(i->id)) - sprintf(i->id, "line%d", drvidx); - for (j = 0; j < drvidx; j++) - if (!strcmp(i->id, dev->drvid[j])) - sprintf(i->id, "line%d", drvidx); - dev->drv[drvidx] = d; - strcpy(dev->drvid[drvidx], i->id); - isdn_info_update(); - dev->drivers++; - set_global_features(); - spin_unlock_irqrestore(&dev->lock, flags); - return 1; -} - -/* -***************************************************************************** -* And now the modules code. -***************************************************************************** -*/ - -static char * -isdn_getrev(const char *revision) -{ - char *rev; - char *p; - - if ((p = strchr(revision, ':'))) { - rev = p + 2; - p = strchr(rev, '$'); - *--p = 0; - } else - rev = "???"; - return rev; -} - -/* - * Allocate and initialize all data, register modem-devices - */ -static int __init isdn_init(void) -{ - int i; - char tmprev[50]; - - dev = vzalloc(sizeof(isdn_dev)); - if (!dev) { - printk(KERN_WARNING "isdn: Could not allocate device-struct.\n"); - return -EIO; - } - timer_setup(&dev->timer, isdn_timer_funct, 0); - spin_lock_init(&dev->lock); - spin_lock_init(&dev->timerlock); -#ifdef MODULE - dev->owner = THIS_MODULE; -#endif - mutex_init(&dev->mtx); - init_waitqueue_head(&dev->info_waitq); - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - dev->drvmap[i] = -1; - dev->chanmap[i] = -1; - dev->m_idx[i] = -1; - strcpy(dev->num[i], "???"); - } - if (register_chrdev(ISDN_MAJOR, "isdn", &isdn_fops)) { - printk(KERN_WARNING "isdn: Could not register control devices\n"); - vfree(dev); - return -EIO; - } - if ((isdn_tty_modem_init()) < 0) { - printk(KERN_WARNING "isdn: Could not register tty devices\n"); - vfree(dev); - unregister_chrdev(ISDN_MAJOR, "isdn"); - return -EIO; - } -#ifdef CONFIG_ISDN_PPP - if (isdn_ppp_init() < 0) { - printk(KERN_WARNING "isdn: Could not create PPP-device-structs\n"); - isdn_tty_exit(); - unregister_chrdev(ISDN_MAJOR, "isdn"); - vfree(dev); - return -EIO; - } -#endif /* CONFIG_ISDN_PPP */ - - strcpy(tmprev, isdn_revision); - printk(KERN_NOTICE "ISDN subsystem Rev: %s/", isdn_getrev(tmprev)); - strcpy(tmprev, isdn_net_revision); - printk("%s/", isdn_getrev(tmprev)); - strcpy(tmprev, isdn_ppp_revision); - printk("%s/", isdn_getrev(tmprev)); - strcpy(tmprev, isdn_audio_revision); - printk("%s/", isdn_getrev(tmprev)); - strcpy(tmprev, isdn_v110_revision); - printk("%s", isdn_getrev(tmprev)); - -#ifdef MODULE - printk(" loaded\n"); -#else - printk("\n"); -#endif - isdn_info_update(); - return 0; -} - -/* - * Unload module - */ -static void __exit isdn_exit(void) -{ -#ifdef CONFIG_ISDN_PPP - isdn_ppp_cleanup(); -#endif - if (isdn_net_rmall() < 0) { - printk(KERN_WARNING "isdn: net-device busy, remove cancelled\n"); - return; - } - isdn_tty_exit(); - unregister_chrdev(ISDN_MAJOR, "isdn"); - del_timer_sync(&dev->timer); - /* call vfree with interrupts enabled, else it will hang */ - vfree(dev); - printk(KERN_NOTICE "ISDN-subsystem unloaded\n"); -} - -module_init(isdn_init); -module_exit(isdn_exit); diff --git a/drivers/isdn/i4l/isdn_common.h b/drivers/isdn/i4l/isdn_common.h deleted file mode 100644 index 2260ef07ab9c..000000000000 --- a/drivers/isdn/i4l/isdn_common.h +++ /dev/null @@ -1,47 +0,0 @@ -/* $Id: isdn_common.h,v 1.1.2.2 2004/01/12 22:37:19 keil Exp $ - * - * header for Linux ISDN subsystem - * common used functions and debugging-switches (linklevel). - * - * Copyright 1994-1999 by Fritz Elfert (fritz@isdn4linux.de) - * Copyright 1995,96 by Thinking Objects Software GmbH Wuerzburg - * Copyright 1995,96 by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#undef ISDN_DEBUG_MODEM_OPEN -#undef ISDN_DEBUG_MODEM_IOCTL -#undef ISDN_DEBUG_MODEM_WAITSENT -#undef ISDN_DEBUG_MODEM_HUP -#undef ISDN_DEBUG_MODEM_ICALL -#undef ISDN_DEBUG_MODEM_DUMP -#undef ISDN_DEBUG_MODEM_VOICE -#undef ISDN_DEBUG_AT -#undef ISDN_DEBUG_NET_DUMP -#undef ISDN_DEBUG_NET_DIAL -#undef ISDN_DEBUG_NET_ICALL - -/* Prototypes */ -extern void isdn_lock_drivers(void); -extern void isdn_unlock_drivers(void); -extern void isdn_free_channel(int di, int ch, int usage); -extern void isdn_all_eaz(int di, int ch); -extern int isdn_command(isdn_ctrl *); -extern int isdn_dc2minor(int di, int ch); -extern void isdn_info_update(void); -extern char *isdn_map_eaz2msn(char *msn, int di); -extern void isdn_timer_ctrl(int tf, int onoff); -extern void isdn_unexclusive_channel(int di, int ch); -extern int isdn_getnum(char **); -extern int isdn_readbchan(int, int, u_char *, u_char *, int, wait_queue_head_t *); -extern int isdn_readbchan_tty(int, int, struct tty_port *, int); -extern int isdn_get_free_channel(int, int, int, int, int, char *); -extern int isdn_writebuf_skb_stub(int, int, int, struct sk_buff *); -extern int register_isdn(isdn_if *i); -extern int isdn_msncmp(const char *, const char *); -#if defined(ISDN_DEBUG_NET_DUMP) || defined(ISDN_DEBUG_MODEM_DUMP) -extern void isdn_dumppkt(char *, u_char *, int, int); -#endif diff --git a/drivers/isdn/i4l/isdn_concap.c b/drivers/isdn/i4l/isdn_concap.c deleted file mode 100644 index 336523ec077c..000000000000 --- a/drivers/isdn/i4l/isdn_concap.c +++ /dev/null @@ -1,99 +0,0 @@ -/* $Id: isdn_concap.c,v 1.1.2.2 2004/01/12 22:37:19 keil Exp $ - * - * Linux ISDN subsystem, protocol encapsulation - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -/* Stuff to support the concap_proto by isdn4linux. isdn4linux - specific - * stuff goes here. Stuff that depends only on the concap protocol goes to - * another -- protocol specific -- source file. - * - */ - - -#include -#include "isdn_x25iface.h" -#include "isdn_net.h" -#include -#include "isdn_concap.h" - - -/* The following set of device service operations are for encapsulation - protocols that require for reliable datalink semantics. That means: - - - before any data is to be submitted the connection must explicitly - be set up. - - after the successful set up of the connection is signalled the - connection is considered to be reliably up. - - Auto-dialing ist not compatible with this requirements. Thus, auto-dialing - is completely bypassed. - - It might be possible to implement a (non standardized) datalink protocol - that provides a reliable data link service while using some auto dialing - mechanism. Such a protocol would need an auxiliary channel (i.e. user-user- - signaling on the D-channel) while the B-channel is down. -*/ - - -static int isdn_concap_dl_data_req(struct concap_proto *concap, struct sk_buff *skb) -{ - struct net_device *ndev = concap->net_dev; - isdn_net_dev *nd = ((isdn_net_local *) netdev_priv(ndev))->netdev; - isdn_net_local *lp = isdn_net_get_locked_lp(nd); - - IX25DEBUG("isdn_concap_dl_data_req: %s \n", concap->net_dev->name); - if (!lp) { - IX25DEBUG("isdn_concap_dl_data_req: %s : isdn_net_send_skb returned %d\n", concap->net_dev->name, 1); - return 1; - } - lp->huptimer = 0; - isdn_net_writebuf_skb(lp, skb); - spin_unlock_bh(&lp->xmit_lock); - IX25DEBUG("isdn_concap_dl_data_req: %s : isdn_net_send_skb returned %d\n", concap->net_dev->name, 0); - return 0; -} - - -static int isdn_concap_dl_connect_req(struct concap_proto *concap) -{ - struct net_device *ndev = concap->net_dev; - isdn_net_local *lp = netdev_priv(ndev); - int ret; - IX25DEBUG("isdn_concap_dl_connect_req: %s \n", ndev->name); - - /* dial ... */ - ret = isdn_net_dial_req(lp); - if (ret) IX25DEBUG("dialing failed\n"); - return ret; -} - -static int isdn_concap_dl_disconn_req(struct concap_proto *concap) -{ - IX25DEBUG("isdn_concap_dl_disconn_req: %s \n", concap->net_dev->name); - - isdn_net_hangup(concap->net_dev); - return 0; -} - -struct concap_device_ops isdn_concap_reliable_dl_dops = { - .data_req = &isdn_concap_dl_data_req, - .connect_req = &isdn_concap_dl_connect_req, - .disconn_req = &isdn_concap_dl_disconn_req -}; - -/* The following should better go into a dedicated source file such that - this sourcefile does not need to include any protocol specific header - files. For now: -*/ -struct concap_proto *isdn_concap_new(int encap) -{ - switch (encap) { - case ISDN_NET_ENCAP_X25IFACE: - return isdn_x25iface_proto_new(); - } - return NULL; -} diff --git a/drivers/isdn/i4l/isdn_concap.h b/drivers/isdn/i4l/isdn_concap.h deleted file mode 100644 index cd7e3ba74e25..000000000000 --- a/drivers/isdn/i4l/isdn_concap.h +++ /dev/null @@ -1,11 +0,0 @@ -/* $Id: isdn_concap.h,v 1.1.2.2 2004/01/12 22:37:19 keil Exp $ - * - * Linux ISDN subsystem, protocol encapsulation - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -extern struct concap_device_ops isdn_concap_reliable_dl_dops; -extern struct concap_proto *isdn_concap_new(int); diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c deleted file mode 100644 index c138f66f2659..000000000000 --- a/drivers/isdn/i4l/isdn_net.c +++ /dev/null @@ -1,3198 +0,0 @@ -/* $Id: isdn_net.c,v 1.1.2.2 2004/01/12 22:37:19 keil Exp $ - * - * Linux ISDN subsystem, network interfaces and related functions (linklevel). - * - * Copyright 1994-1998 by Fritz Elfert (fritz@isdn4linux.de) - * Copyright 1995,96 by Thinking Objects Software GmbH Wuerzburg - * Copyright 1995,96 by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * Data Over Voice (DOV) support added - Guy Ellis 23-Mar-02 - * guy@traverse.com.au - * Outgoing calls - looks for a 'V' in first char of dialed number - * Incoming calls - checks first character of eaz as follows: - * Numeric - accept DATA only - original functionality - * 'V' - accept VOICE (DOV) only - * 'B' - accept BOTH DATA and DOV types - * - * Jan 2001: fix CISCO HDLC Bjoern A. Zeeb - * for info on the protocol, see - * http://i4l.zabbadoz.net/i4l/cisco-hdlc.txt - */ - -#include -#include -#include -#include -#include -#include -#include "isdn_common.h" -#include "isdn_net.h" -#ifdef CONFIG_ISDN_PPP -#include "isdn_ppp.h" -#endif -#ifdef CONFIG_ISDN_X25 -#include -#include "isdn_concap.h" -#endif - - -/* - * Outline of new tbusy handling: - * - * Old method, roughly spoken, consisted of setting tbusy when entering - * isdn_net_start_xmit() and at several other locations and clearing - * it from isdn_net_start_xmit() thread when sending was successful. - * - * With 2.3.x multithreaded network core, to prevent problems, tbusy should - * only be set by the isdn_net_start_xmit() thread and only when a tx-busy - * condition is detected. Other threads (in particular isdn_net_stat_callb()) - * are only allowed to clear tbusy. - * - * -HE - */ - -/* - * About SOFTNET: - * Most of the changes were pretty obvious and basically done by HE already. - * - * One problem of the isdn net device code is that it uses struct net_device - * for masters and slaves. However, only master interface are registered to - * the network layer, and therefore, it only makes sense to call netif_* - * functions on them. - * - * --KG - */ - -/* - * Find out if the netdevice has been ifup-ed yet. - * For slaves, look at the corresponding master. - */ -static __inline__ int isdn_net_device_started(isdn_net_dev *n) -{ - isdn_net_local *lp = n->local; - struct net_device *dev; - - if (lp->master) - dev = lp->master; - else - dev = n->dev; - return netif_running(dev); -} - -/* - * wake up the network -> net_device queue. - * For slaves, wake the corresponding master interface. - */ -static __inline__ void isdn_net_device_wake_queue(isdn_net_local *lp) -{ - if (lp->master) - netif_wake_queue(lp->master); - else - netif_wake_queue(lp->netdev->dev); -} - -/* - * stop the network -> net_device queue. - * For slaves, stop the corresponding master interface. - */ -static __inline__ void isdn_net_device_stop_queue(isdn_net_local *lp) -{ - if (lp->master) - netif_stop_queue(lp->master); - else - netif_stop_queue(lp->netdev->dev); -} - -/* - * find out if the net_device which this lp belongs to (lp can be - * master or slave) is busy. It's busy iff all (master and slave) - * queues are busy - */ -static __inline__ int isdn_net_device_busy(isdn_net_local *lp) -{ - isdn_net_local *nlp; - isdn_net_dev *nd; - unsigned long flags; - - if (!isdn_net_lp_busy(lp)) - return 0; - - if (lp->master) - nd = ISDN_MASTER_PRIV(lp)->netdev; - else - nd = lp->netdev; - - spin_lock_irqsave(&nd->queue_lock, flags); - nlp = lp->next; - while (nlp != lp) { - if (!isdn_net_lp_busy(nlp)) { - spin_unlock_irqrestore(&nd->queue_lock, flags); - return 0; - } - nlp = nlp->next; - } - spin_unlock_irqrestore(&nd->queue_lock, flags); - return 1; -} - -static __inline__ void isdn_net_inc_frame_cnt(isdn_net_local *lp) -{ - atomic_inc(&lp->frame_cnt); - if (isdn_net_device_busy(lp)) - isdn_net_device_stop_queue(lp); -} - -static __inline__ void isdn_net_dec_frame_cnt(isdn_net_local *lp) -{ - atomic_dec(&lp->frame_cnt); - - if (!(isdn_net_device_busy(lp))) { - if (!skb_queue_empty(&lp->super_tx_queue)) { - schedule_work(&lp->tqueue); - } else { - isdn_net_device_wake_queue(lp); - } - } -} - -static __inline__ void isdn_net_zero_frame_cnt(isdn_net_local *lp) -{ - atomic_set(&lp->frame_cnt, 0); -} - -/* For 2.2.x we leave the transmitter busy timeout at 2 secs, just - * to be safe. - * For 2.3.x we push it up to 20 secs, because call establishment - * (in particular callback) may take such a long time, and we - * don't want confusing messages in the log. However, there is a slight - * possibility that this large timeout will break other things like MPPP, - * which might rely on the tx timeout. If so, we'll find out this way... - */ - -#define ISDN_NET_TX_TIMEOUT (20 * HZ) - -/* Prototypes */ - -static int isdn_net_force_dial_lp(isdn_net_local *); -static netdev_tx_t isdn_net_start_xmit(struct sk_buff *, - struct net_device *); - -static void isdn_net_ciscohdlck_connected(isdn_net_local *lp); -static void isdn_net_ciscohdlck_disconnected(isdn_net_local *lp); - -char *isdn_net_revision = "$Revision: 1.1.2.2 $"; - -/* - * Code for raw-networking over ISDN - */ - -static void -isdn_net_unreachable(struct net_device *dev, struct sk_buff *skb, char *reason) -{ - if (skb) { - - u_short proto = ntohs(skb->protocol); - - printk(KERN_DEBUG "isdn_net: %s: %s, signalling dst_link_failure %s\n", - dev->name, - (reason != NULL) ? reason : "unknown", - (proto != ETH_P_IP) ? "Protocol != ETH_P_IP" : ""); - - dst_link_failure(skb); - } - else { /* dial not triggered by rawIP packet */ - printk(KERN_DEBUG "isdn_net: %s: %s\n", - dev->name, - (reason != NULL) ? reason : "reason unknown"); - } -} - -static void -isdn_net_reset(struct net_device *dev) -{ -#ifdef CONFIG_ISDN_X25 - struct concap_device_ops *dops = - ((isdn_net_local *)netdev_priv(dev))->dops; - struct concap_proto *cprot = - ((isdn_net_local *)netdev_priv(dev))->netdev->cprot; -#endif -#ifdef CONFIG_ISDN_X25 - if (cprot && cprot->pops && dops) - cprot->pops->restart(cprot, dev, dops); -#endif -} - -/* Open/initialize the board. */ -static int -isdn_net_open(struct net_device *dev) -{ - int i; - struct net_device *p; - struct in_device *in_dev; - - /* moved here from isdn_net_reset, because only the master has an - interface associated which is supposed to be started. BTW: - we need to call netif_start_queue, not netif_wake_queue here */ - netif_start_queue(dev); - - isdn_net_reset(dev); - /* Fill in the MAC-level header (not needed, but for compatibility... */ - for (i = 0; i < ETH_ALEN - sizeof(u32); i++) - dev->dev_addr[i] = 0xfc; - if ((in_dev = dev->ip_ptr) != NULL) { - /* - * Any address will do - we take the first - */ - struct in_ifaddr *ifa = in_dev->ifa_list; - if (ifa != NULL) - memcpy(dev->dev_addr + 2, &ifa->ifa_local, 4); - } - - /* If this interface has slaves, start them also */ - p = MASTER_TO_SLAVE(dev); - if (p) { - while (p) { - isdn_net_reset(p); - p = MASTER_TO_SLAVE(p); - } - } - isdn_lock_drivers(); - return 0; -} - -/* - * Assign an ISDN-channel to a net-interface - */ -static void -isdn_net_bind_channel(isdn_net_local *lp, int idx) -{ - lp->flags |= ISDN_NET_CONNECTED; - lp->isdn_device = dev->drvmap[idx]; - lp->isdn_channel = dev->chanmap[idx]; - dev->rx_netdev[idx] = lp->netdev; - dev->st_netdev[idx] = lp->netdev; -} - -/* - * unbind a net-interface (resets interface after an error) - */ -static void -isdn_net_unbind_channel(isdn_net_local *lp) -{ - skb_queue_purge(&lp->super_tx_queue); - - if (!lp->master) { /* reset only master device */ - /* Moral equivalent of dev_purge_queues(): - BEWARE! This chunk of code cannot be called from hardware - interrupt handler. I hope it is true. --ANK - */ - qdisc_reset_all_tx(lp->netdev->dev); - } - lp->dialstate = 0; - dev->rx_netdev[isdn_dc2minor(lp->isdn_device, lp->isdn_channel)] = NULL; - dev->st_netdev[isdn_dc2minor(lp->isdn_device, lp->isdn_channel)] = NULL; - if (lp->isdn_device != -1 && lp->isdn_channel != -1) - isdn_free_channel(lp->isdn_device, lp->isdn_channel, - ISDN_USAGE_NET); - lp->flags &= ~ISDN_NET_CONNECTED; - lp->isdn_device = -1; - lp->isdn_channel = -1; -} - -/* - * Perform auto-hangup and cps-calculation for net-interfaces. - * - * auto-hangup: - * Increment idle-counter (this counter is reset on any incoming or - * outgoing packet), if counter exceeds configured limit either do a - * hangup immediately or - if configured - wait until just before the next - * charge-info. - * - * cps-calculation (needed for dynamic channel-bundling): - * Since this function is called every second, simply reset the - * byte-counter of the interface after copying it to the cps-variable. - */ -static unsigned long last_jiffies = -HZ; - -void -isdn_net_autohup(void) -{ - isdn_net_dev *p = dev->netdev; - int anymore; - - anymore = 0; - while (p) { - isdn_net_local *l = p->local; - if (jiffies == last_jiffies) - l->cps = l->transcount; - else - l->cps = (l->transcount * HZ) / (jiffies - last_jiffies); - l->transcount = 0; - if (dev->net_verbose > 3) - printk(KERN_DEBUG "%s: %d bogocps\n", p->dev->name, l->cps); - if ((l->flags & ISDN_NET_CONNECTED) && (!l->dialstate)) { - anymore = 1; - l->huptimer++; - /* - * if there is some dialmode where timeout-hangup - * should _not_ be done, check for that here - */ - if ((l->onhtime) && - (l->huptimer > l->onhtime)) - { - if (l->hupflags & ISDN_MANCHARGE && - l->hupflags & ISDN_CHARGEHUP) { - while (time_after(jiffies, l->chargetime + l->chargeint)) - l->chargetime += l->chargeint; - if (time_after(jiffies, l->chargetime + l->chargeint - 2 * HZ)) - if (l->outgoing || l->hupflags & ISDN_INHUP) - isdn_net_hangup(p->dev); - } else if (l->outgoing) { - if (l->hupflags & ISDN_CHARGEHUP) { - if (l->hupflags & ISDN_WAITCHARGE) { - printk(KERN_DEBUG "isdn_net: Hupflags of %s are %X\n", - p->dev->name, l->hupflags); - isdn_net_hangup(p->dev); - } else if (time_after(jiffies, l->chargetime + l->chargeint)) { - printk(KERN_DEBUG - "isdn_net: %s: chtime = %lu, chint = %d\n", - p->dev->name, l->chargetime, l->chargeint); - isdn_net_hangup(p->dev); - } - } else - isdn_net_hangup(p->dev); - } else if (l->hupflags & ISDN_INHUP) - isdn_net_hangup(p->dev); - } - - if (dev->global_flags & ISDN_GLOBAL_STOPPED || (ISDN_NET_DIALMODE(*l) == ISDN_NET_DM_OFF)) { - isdn_net_hangup(p->dev); - break; - } - } - p = (isdn_net_dev *) p->next; - } - last_jiffies = jiffies; - isdn_timer_ctrl(ISDN_TIMER_NETHANGUP, anymore); -} - -static void isdn_net_lp_disconnected(isdn_net_local *lp) -{ - isdn_net_rm_from_bundle(lp); -} - -/* - * Handle status-messages from ISDN-interfacecard. - * This function is called from within the main-status-dispatcher - * isdn_status_callback, which itself is called from the low-level driver. - * Return: 1 = Event handled, 0 = not for us or unknown Event. - */ -int -isdn_net_stat_callback(int idx, isdn_ctrl *c) -{ - isdn_net_dev *p = dev->st_netdev[idx]; - int cmd = c->command; - - if (p) { - isdn_net_local *lp = p->local; -#ifdef CONFIG_ISDN_X25 - struct concap_proto *cprot = lp->netdev->cprot; - struct concap_proto_ops *pops = cprot ? cprot->pops : NULL; -#endif - switch (cmd) { - case ISDN_STAT_BSENT: - /* A packet has successfully been sent out */ - if ((lp->flags & ISDN_NET_CONNECTED) && - (!lp->dialstate)) { - isdn_net_dec_frame_cnt(lp); - lp->stats.tx_packets++; - lp->stats.tx_bytes += c->parm.length; - } - return 1; - case ISDN_STAT_DCONN: - /* D-Channel is up */ - switch (lp->dialstate) { - case 4: - case 7: - case 8: - lp->dialstate++; - return 1; - case 12: - lp->dialstate = 5; - return 1; - } - break; - case ISDN_STAT_DHUP: - /* Either D-Channel-hangup or error during dialout */ -#ifdef CONFIG_ISDN_X25 - /* If we are not connencted then dialing had - failed. If there are generic encap protocol - receiver routines signal the closure of - the link*/ - - if (!(lp->flags & ISDN_NET_CONNECTED) - && pops && pops->disconn_ind) - pops->disconn_ind(cprot); -#endif /* CONFIG_ISDN_X25 */ - if ((!lp->dialstate) && (lp->flags & ISDN_NET_CONNECTED)) { - if (lp->p_encap == ISDN_NET_ENCAP_CISCOHDLCK) - isdn_net_ciscohdlck_disconnected(lp); -#ifdef CONFIG_ISDN_PPP - if (lp->p_encap == ISDN_NET_ENCAP_SYNCPPP) - isdn_ppp_free(lp); -#endif - isdn_net_lp_disconnected(lp); - isdn_all_eaz(lp->isdn_device, lp->isdn_channel); - printk(KERN_INFO "%s: remote hangup\n", p->dev->name); - printk(KERN_INFO "%s: Chargesum is %d\n", p->dev->name, - lp->charge); - isdn_net_unbind_channel(lp); - return 1; - } - break; -#ifdef CONFIG_ISDN_X25 - case ISDN_STAT_BHUP: - /* B-Channel-hangup */ - /* try if there are generic encap protocol - receiver routines and signal the closure of - the link */ - if (pops && pops->disconn_ind) { - pops->disconn_ind(cprot); - return 1; - } - break; -#endif /* CONFIG_ISDN_X25 */ - case ISDN_STAT_BCONN: - /* B-Channel is up */ - isdn_net_zero_frame_cnt(lp); - switch (lp->dialstate) { - case 5: - case 6: - case 7: - case 8: - case 9: - case 10: - case 12: - if (lp->dialstate <= 6) { - dev->usage[idx] |= ISDN_USAGE_OUTGOING; - isdn_info_update(); - } else - dev->rx_netdev[idx] = p; - lp->dialstate = 0; - isdn_timer_ctrl(ISDN_TIMER_NETHANGUP, 1); - if (lp->p_encap == ISDN_NET_ENCAP_CISCOHDLCK) - isdn_net_ciscohdlck_connected(lp); - if (lp->p_encap != ISDN_NET_ENCAP_SYNCPPP) { - if (lp->master) { /* is lp a slave? */ - isdn_net_dev *nd = ISDN_MASTER_PRIV(lp)->netdev; - isdn_net_add_to_bundle(nd, lp); - } - } - printk(KERN_INFO "isdn_net: %s connected\n", p->dev->name); - /* If first Chargeinfo comes before B-Channel connect, - * we correct the timestamp here. - */ - lp->chargetime = jiffies; - - /* reset dial-timeout */ - lp->dialstarted = 0; - lp->dialwait_timer = 0; - -#ifdef CONFIG_ISDN_PPP - if (lp->p_encap == ISDN_NET_ENCAP_SYNCPPP) - isdn_ppp_wakeup_daemon(lp); -#endif -#ifdef CONFIG_ISDN_X25 - /* try if there are generic concap receiver routines */ - if (pops) - if (pops->connect_ind) - pops->connect_ind(cprot); -#endif /* CONFIG_ISDN_X25 */ - /* ppp needs to do negotiations first */ - if (lp->p_encap != ISDN_NET_ENCAP_SYNCPPP) - isdn_net_device_wake_queue(lp); - return 1; - } - break; - case ISDN_STAT_NODCH: - /* No D-Channel avail. */ - if (lp->dialstate == 4) { - lp->dialstate--; - return 1; - } - break; - case ISDN_STAT_CINF: - /* Charge-info from TelCo. Calculate interval between - * charge-infos and set timestamp for last info for - * usage by isdn_net_autohup() - */ - lp->charge++; - if (lp->hupflags & ISDN_HAVECHARGE) { - lp->hupflags &= ~ISDN_WAITCHARGE; - lp->chargeint = jiffies - lp->chargetime - (2 * HZ); - } - if (lp->hupflags & ISDN_WAITCHARGE) - lp->hupflags |= ISDN_HAVECHARGE; - lp->chargetime = jiffies; - printk(KERN_DEBUG "isdn_net: Got CINF chargetime of %s now %lu\n", - p->dev->name, lp->chargetime); - return 1; - } - } - return 0; -} - -/* - * Perform dialout for net-interfaces and timeout-handling for - * D-Channel-up and B-Channel-up Messages. - * This function is initially called from within isdn_net_start_xmit() or - * or isdn_net_find_icall() after initializing the dialstate for an - * interface. If further calls are needed, the function schedules itself - * for a timer-callback via isdn_timer_function(). - * The dialstate is also affected by incoming status-messages from - * the ISDN-Channel which are handled in isdn_net_stat_callback() above. - */ -void -isdn_net_dial(void) -{ - isdn_net_dev *p = dev->netdev; - int anymore = 0; - int i; - isdn_ctrl cmd; - u_char *phone_number; - - while (p) { - isdn_net_local *lp = p->local; - -#ifdef ISDN_DEBUG_NET_DIAL - if (lp->dialstate) - printk(KERN_DEBUG "%s: dialstate=%d\n", p->dev->name, lp->dialstate); -#endif - switch (lp->dialstate) { - case 0: - /* Nothing to do for this interface */ - break; - case 1: - /* Initiate dialout. Set phone-number-pointer to first number - * of interface. - */ - lp->dial = lp->phone[1]; - if (!lp->dial) { - printk(KERN_WARNING "%s: phone number deleted?\n", - p->dev->name); - isdn_net_hangup(p->dev); - break; - } - anymore = 1; - - if (lp->dialtimeout > 0) - if (lp->dialstarted == 0 || time_after(jiffies, lp->dialstarted + lp->dialtimeout + lp->dialwait)) { - lp->dialstarted = jiffies; - lp->dialwait_timer = 0; - } - - lp->dialstate++; - /* Fall through */ - case 2: - /* Prepare dialing. Clear EAZ, then set EAZ. */ - cmd.driver = lp->isdn_device; - cmd.arg = lp->isdn_channel; - cmd.command = ISDN_CMD_CLREAZ; - isdn_command(&cmd); - sprintf(cmd.parm.num, "%s", isdn_map_eaz2msn(lp->msn, cmd.driver)); - cmd.command = ISDN_CMD_SETEAZ; - isdn_command(&cmd); - lp->dialretry = 0; - anymore = 1; - lp->dialstate++; - /* Fall through */ - case 3: - /* Setup interface, dial current phone-number, switch to next number. - * If list of phone-numbers is exhausted, increment - * retry-counter. - */ - if (dev->global_flags & ISDN_GLOBAL_STOPPED || (ISDN_NET_DIALMODE(*lp) == ISDN_NET_DM_OFF)) { - char *s; - if (dev->global_flags & ISDN_GLOBAL_STOPPED) - s = "dial suppressed: isdn system stopped"; - else - s = "dial suppressed: dialmode `off'"; - isdn_net_unreachable(p->dev, NULL, s); - isdn_net_hangup(p->dev); - break; - } - cmd.driver = lp->isdn_device; - cmd.command = ISDN_CMD_SETL2; - cmd.arg = lp->isdn_channel + (lp->l2_proto << 8); - isdn_command(&cmd); - cmd.driver = lp->isdn_device; - cmd.command = ISDN_CMD_SETL3; - cmd.arg = lp->isdn_channel + (lp->l3_proto << 8); - isdn_command(&cmd); - cmd.driver = lp->isdn_device; - cmd.arg = lp->isdn_channel; - if (!lp->dial) { - printk(KERN_WARNING "%s: phone number deleted?\n", - p->dev->name); - isdn_net_hangup(p->dev); - break; - } - if (!strncmp(lp->dial->num, "LEASED", strlen("LEASED"))) { - lp->dialstate = 4; - printk(KERN_INFO "%s: Open leased line ...\n", p->dev->name); - } else { - if (lp->dialtimeout > 0) - if (time_after(jiffies, lp->dialstarted + lp->dialtimeout)) { - lp->dialwait_timer = jiffies + lp->dialwait; - lp->dialstarted = 0; - isdn_net_unreachable(p->dev, NULL, "dial: timed out"); - isdn_net_hangup(p->dev); - break; - } - - cmd.driver = lp->isdn_device; - cmd.command = ISDN_CMD_DIAL; - cmd.parm.setup.si2 = 0; - - /* check for DOV */ - phone_number = lp->dial->num; - if ((*phone_number == 'v') || - (*phone_number == 'V')) { /* DOV call */ - cmd.parm.setup.si1 = 1; - } else { /* DATA call */ - cmd.parm.setup.si1 = 7; - } - - strcpy(cmd.parm.setup.phone, phone_number); - /* - * Switch to next number or back to start if at end of list. - */ - if (!(lp->dial = (isdn_net_phone *) lp->dial->next)) { - lp->dial = lp->phone[1]; - lp->dialretry++; - - if (lp->dialretry > lp->dialmax) { - if (lp->dialtimeout == 0) { - lp->dialwait_timer = jiffies + lp->dialwait; - lp->dialstarted = 0; - isdn_net_unreachable(p->dev, NULL, "dial: tried all numbers dialmax times"); - } - isdn_net_hangup(p->dev); - break; - } - } - sprintf(cmd.parm.setup.eazmsn, "%s", - isdn_map_eaz2msn(lp->msn, cmd.driver)); - i = isdn_dc2minor(lp->isdn_device, lp->isdn_channel); - if (i >= 0) { - strcpy(dev->num[i], cmd.parm.setup.phone); - dev->usage[i] |= ISDN_USAGE_OUTGOING; - isdn_info_update(); - } - printk(KERN_INFO "%s: dialing %d %s... %s\n", p->dev->name, - lp->dialretry, cmd.parm.setup.phone, - (cmd.parm.setup.si1 == 1) ? "DOV" : ""); - lp->dtimer = 0; -#ifdef ISDN_DEBUG_NET_DIAL - printk(KERN_DEBUG "dial: d=%d c=%d\n", lp->isdn_device, - lp->isdn_channel); -#endif - isdn_command(&cmd); - } - lp->huptimer = 0; - lp->outgoing = 1; - if (lp->chargeint) { - lp->hupflags |= ISDN_HAVECHARGE; - lp->hupflags &= ~ISDN_WAITCHARGE; - } else { - lp->hupflags |= ISDN_WAITCHARGE; - lp->hupflags &= ~ISDN_HAVECHARGE; - } - anymore = 1; - lp->dialstate = - (lp->cbdelay && - (lp->flags & ISDN_NET_CBOUT)) ? 12 : 4; - break; - case 4: - /* Wait for D-Channel-connect. - * If timeout, switch back to state 3. - * Dialmax-handling moved to state 3. - */ - if (lp->dtimer++ > ISDN_TIMER_DTIMEOUT10) - lp->dialstate = 3; - anymore = 1; - break; - case 5: - /* Got D-Channel-Connect, send B-Channel-request */ - cmd.driver = lp->isdn_device; - cmd.arg = lp->isdn_channel; - cmd.command = ISDN_CMD_ACCEPTB; - anymore = 1; - lp->dtimer = 0; - lp->dialstate++; - isdn_command(&cmd); - break; - case 6: - /* Wait for B- or D-Channel-connect. If timeout, - * switch back to state 3. - */ -#ifdef ISDN_DEBUG_NET_DIAL - printk(KERN_DEBUG "dialtimer2: %d\n", lp->dtimer); -#endif - if (lp->dtimer++ > ISDN_TIMER_DTIMEOUT10) - lp->dialstate = 3; - anymore = 1; - break; - case 7: - /* Got incoming Call, setup L2 and L3 protocols, - * then wait for D-Channel-connect - */ -#ifdef ISDN_DEBUG_NET_DIAL - printk(KERN_DEBUG "dialtimer4: %d\n", lp->dtimer); -#endif - cmd.driver = lp->isdn_device; - cmd.command = ISDN_CMD_SETL2; - cmd.arg = lp->isdn_channel + (lp->l2_proto << 8); - isdn_command(&cmd); - cmd.driver = lp->isdn_device; - cmd.command = ISDN_CMD_SETL3; - cmd.arg = lp->isdn_channel + (lp->l3_proto << 8); - isdn_command(&cmd); - if (lp->dtimer++ > ISDN_TIMER_DTIMEOUT15) - isdn_net_hangup(p->dev); - else { - anymore = 1; - lp->dialstate++; - } - break; - case 9: - /* Got incoming D-Channel-Connect, send B-Channel-request */ - cmd.driver = lp->isdn_device; - cmd.arg = lp->isdn_channel; - cmd.command = ISDN_CMD_ACCEPTB; - isdn_command(&cmd); - anymore = 1; - lp->dtimer = 0; - lp->dialstate++; - break; - case 8: - case 10: - /* Wait for B- or D-channel-connect */ -#ifdef ISDN_DEBUG_NET_DIAL - printk(KERN_DEBUG "dialtimer4: %d\n", lp->dtimer); -#endif - if (lp->dtimer++ > ISDN_TIMER_DTIMEOUT10) - isdn_net_hangup(p->dev); - else - anymore = 1; - break; - case 11: - /* Callback Delay */ - if (lp->dtimer++ > lp->cbdelay) - lp->dialstate = 1; - anymore = 1; - break; - case 12: - /* Remote does callback. Hangup after cbdelay, then wait for incoming - * call (in state 4). - */ - if (lp->dtimer++ > lp->cbdelay) - { - printk(KERN_INFO "%s: hangup waiting for callback ...\n", p->dev->name); - lp->dtimer = 0; - lp->dialstate = 4; - cmd.driver = lp->isdn_device; - cmd.command = ISDN_CMD_HANGUP; - cmd.arg = lp->isdn_channel; - isdn_command(&cmd); - isdn_all_eaz(lp->isdn_device, lp->isdn_channel); - } - anymore = 1; - break; - default: - printk(KERN_WARNING "isdn_net: Illegal dialstate %d for device %s\n", - lp->dialstate, p->dev->name); - } - p = (isdn_net_dev *) p->next; - } - isdn_timer_ctrl(ISDN_TIMER_NETDIAL, anymore); -} - -/* - * Perform hangup for a net-interface. - */ -void -isdn_net_hangup(struct net_device *d) -{ - isdn_net_local *lp = netdev_priv(d); - isdn_ctrl cmd; -#ifdef CONFIG_ISDN_X25 - struct concap_proto *cprot = lp->netdev->cprot; - struct concap_proto_ops *pops = cprot ? cprot->pops : NULL; -#endif - - if (lp->flags & ISDN_NET_CONNECTED) { - if (lp->slave != NULL) { - isdn_net_local *slp = ISDN_SLAVE_PRIV(lp); - if (slp->flags & ISDN_NET_CONNECTED) { - printk(KERN_INFO - "isdn_net: hang up slave %s before %s\n", - lp->slave->name, d->name); - isdn_net_hangup(lp->slave); - } - } - printk(KERN_INFO "isdn_net: local hangup %s\n", d->name); -#ifdef CONFIG_ISDN_PPP - if (lp->p_encap == ISDN_NET_ENCAP_SYNCPPP) - isdn_ppp_free(lp); -#endif - isdn_net_lp_disconnected(lp); -#ifdef CONFIG_ISDN_X25 - /* try if there are generic encap protocol - receiver routines and signal the closure of - the link */ - if (pops && pops->disconn_ind) - pops->disconn_ind(cprot); -#endif /* CONFIG_ISDN_X25 */ - - cmd.driver = lp->isdn_device; - cmd.command = ISDN_CMD_HANGUP; - cmd.arg = lp->isdn_channel; - isdn_command(&cmd); - printk(KERN_INFO "%s: Chargesum is %d\n", d->name, lp->charge); - isdn_all_eaz(lp->isdn_device, lp->isdn_channel); - } - isdn_net_unbind_channel(lp); -} - -typedef struct { - __be16 source; - __be16 dest; -} ip_ports; - -static void -isdn_net_log_skb(struct sk_buff *skb, isdn_net_local *lp) -{ - /* hopefully, this was set correctly */ - const u_char *p = skb_network_header(skb); - unsigned short proto = ntohs(skb->protocol); - int data_ofs; - ip_ports *ipp; - char addinfo[100]; - - addinfo[0] = '\0'; - /* This check stolen from 2.1.72 dev_queue_xmit_nit() */ - if (p < skb->data || skb_network_header(skb) >= skb_tail_pointer(skb)) { - /* fall back to old isdn_net_log_packet method() */ - char *buf = skb->data; - - printk(KERN_DEBUG "isdn_net: protocol %04x is buggy, dev %s\n", skb->protocol, lp->netdev->dev->name); - p = buf; - proto = ETH_P_IP; - switch (lp->p_encap) { - case ISDN_NET_ENCAP_IPTYP: - proto = ntohs(*(__be16 *)&buf[0]); - p = &buf[2]; - break; - case ISDN_NET_ENCAP_ETHER: - proto = ntohs(*(__be16 *)&buf[12]); - p = &buf[14]; - break; - case ISDN_NET_ENCAP_CISCOHDLC: - proto = ntohs(*(__be16 *)&buf[2]); - p = &buf[4]; - break; -#ifdef CONFIG_ISDN_PPP - case ISDN_NET_ENCAP_SYNCPPP: - proto = ntohs(skb->protocol); - p = &buf[IPPP_MAX_HEADER]; - break; -#endif - } - } - data_ofs = ((p[0] & 15) * 4); - switch (proto) { - case ETH_P_IP: - switch (p[9]) { - case 1: - strcpy(addinfo, " ICMP"); - break; - case 2: - strcpy(addinfo, " IGMP"); - break; - case 4: - strcpy(addinfo, " IPIP"); - break; - case 6: - ipp = (ip_ports *) (&p[data_ofs]); - sprintf(addinfo, " TCP, port: %d -> %d", ntohs(ipp->source), - ntohs(ipp->dest)); - break; - case 8: - strcpy(addinfo, " EGP"); - break; - case 12: - strcpy(addinfo, " PUP"); - break; - case 17: - ipp = (ip_ports *) (&p[data_ofs]); - sprintf(addinfo, " UDP, port: %d -> %d", ntohs(ipp->source), - ntohs(ipp->dest)); - break; - case 22: - strcpy(addinfo, " IDP"); - break; - } - printk(KERN_INFO "OPEN: %pI4 -> %pI4%s\n", - p + 12, p + 16, addinfo); - break; - case ETH_P_ARP: - printk(KERN_INFO "OPEN: ARP %pI4 -> *.*.*.* ?%pI4\n", - p + 14, p + 24); - break; - } -} - -/* - * this function is used to send supervisory data, i.e. data which was - * not received from the network layer, but e.g. frames from ipppd, CCP - * reset frames etc. - */ -void isdn_net_write_super(isdn_net_local *lp, struct sk_buff *skb) -{ - if (in_irq()) { - // we can't grab the lock from irq context, - // so we just queue the packet - skb_queue_tail(&lp->super_tx_queue, skb); - schedule_work(&lp->tqueue); - return; - } - - spin_lock_bh(&lp->xmit_lock); - if (!isdn_net_lp_busy(lp)) { - isdn_net_writebuf_skb(lp, skb); - } else { - skb_queue_tail(&lp->super_tx_queue, skb); - } - spin_unlock_bh(&lp->xmit_lock); -} - -/* - * called from tq_immediate - */ -static void isdn_net_softint(struct work_struct *work) -{ - isdn_net_local *lp = container_of(work, isdn_net_local, tqueue); - struct sk_buff *skb; - - spin_lock_bh(&lp->xmit_lock); - while (!isdn_net_lp_busy(lp)) { - skb = skb_dequeue(&lp->super_tx_queue); - if (!skb) - break; - isdn_net_writebuf_skb(lp, skb); - } - spin_unlock_bh(&lp->xmit_lock); -} - -/* - * all frames sent from the (net) LL to a HL driver should go via this function - * it's serialized by the caller holding the lp->xmit_lock spinlock - */ -void isdn_net_writebuf_skb(isdn_net_local *lp, struct sk_buff *skb) -{ - int ret; - int len = skb->len; /* save len */ - - /* before obtaining the lock the caller should have checked that - the lp isn't busy */ - if (isdn_net_lp_busy(lp)) { - printk("isdn BUG at %s:%d!\n", __FILE__, __LINE__); - goto error; - } - - if (!(lp->flags & ISDN_NET_CONNECTED)) { - printk("isdn BUG at %s:%d!\n", __FILE__, __LINE__); - goto error; - } - ret = isdn_writebuf_skb_stub(lp->isdn_device, lp->isdn_channel, 1, skb); - if (ret != len) { - /* we should never get here */ - printk(KERN_WARNING "%s: HL driver queue full\n", lp->netdev->dev->name); - goto error; - } - - lp->transcount += len; - isdn_net_inc_frame_cnt(lp); - return; - -error: - dev_kfree_skb(skb); - lp->stats.tx_errors++; - -} - - -/* - * Helper function for isdn_net_start_xmit. - * When called, the connection is already established. - * Based on cps-calculation, check if device is overloaded. - * If so, and if a slave exists, trigger dialing for it. - * If any slave is online, deliver packets using a simple round robin - * scheme. - * - * Return: 0 on success, !0 on failure. - */ - -static int -isdn_net_xmit(struct net_device *ndev, struct sk_buff *skb) -{ - isdn_net_dev *nd; - isdn_net_local *slp; - isdn_net_local *lp = netdev_priv(ndev); - int retv = NETDEV_TX_OK; - - if (((isdn_net_local *) netdev_priv(ndev))->master) { - printk("isdn BUG at %s:%d!\n", __FILE__, __LINE__); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } - - /* For the other encaps the header has already been built */ -#ifdef CONFIG_ISDN_PPP - if (lp->p_encap == ISDN_NET_ENCAP_SYNCPPP) { - return isdn_ppp_xmit(skb, ndev); - } -#endif - nd = ((isdn_net_local *) netdev_priv(ndev))->netdev; - lp = isdn_net_get_locked_lp(nd); - if (!lp) { - printk(KERN_WARNING "%s: all channels busy - requeuing!\n", ndev->name); - return NETDEV_TX_BUSY; - } - /* we have our lp locked from now on */ - - /* Reset hangup-timeout */ - lp->huptimer = 0; // FIXME? - isdn_net_writebuf_skb(lp, skb); - spin_unlock_bh(&lp->xmit_lock); - - /* the following stuff is here for backwards compatibility. - * in future, start-up and hangup of slaves (based on current load) - * should move to userspace and get based on an overall cps - * calculation - */ - if (lp->cps > lp->triggercps) { - if (lp->slave) { - if (!lp->sqfull) { - /* First time overload: set timestamp only */ - lp->sqfull = 1; - lp->sqfull_stamp = jiffies; - } else { - /* subsequent overload: if slavedelay exceeded, start dialing */ - if (time_after(jiffies, lp->sqfull_stamp + lp->slavedelay)) { - slp = ISDN_SLAVE_PRIV(lp); - if (!(slp->flags & ISDN_NET_CONNECTED)) { - isdn_net_force_dial_lp(ISDN_SLAVE_PRIV(lp)); - } - } - } - } - } else { - if (lp->sqfull && time_after(jiffies, lp->sqfull_stamp + lp->slavedelay + (10 * HZ))) { - lp->sqfull = 0; - } - /* this is a hack to allow auto-hangup for slaves on moderate loads */ - nd->queue = nd->local; - } - - return retv; - -} - -static void -isdn_net_adjust_hdr(struct sk_buff *skb, struct net_device *dev) -{ - isdn_net_local *lp = netdev_priv(dev); - if (!skb) - return; - if (lp->p_encap == ISDN_NET_ENCAP_ETHER) { - const int pullsize = skb_network_offset(skb) - ETH_HLEN; - if (pullsize > 0) { - printk(KERN_DEBUG "isdn_net: Pull junk %d\n", pullsize); - skb_pull(skb, pullsize); - } - } -} - - -static void isdn_net_tx_timeout(struct net_device *ndev) -{ - isdn_net_local *lp = netdev_priv(ndev); - - printk(KERN_WARNING "isdn_tx_timeout dev %s dialstate %d\n", ndev->name, lp->dialstate); - if (!lp->dialstate) { - lp->stats.tx_errors++; - /* - * There is a certain probability that this currently - * works at all because if we always wake up the interface, - * then upper layer will try to send the next packet - * immediately. And then, the old clean_up logic in the - * driver will hopefully continue to work as it used to do. - * - * This is rather primitive right know, we better should - * clean internal queues here, in particular for multilink and - * ppp, and reset HL driver's channel, too. --HE - * - * actually, this may not matter at all, because ISDN hardware - * should not see transmitter hangs at all IMO - * changed KERN_DEBUG to KERN_WARNING to find out if this is - * ever called --KG - */ - } - netif_trans_update(ndev); - netif_wake_queue(ndev); -} - -/* - * Try sending a packet. - * If this interface isn't connected to a ISDN-Channel, find a free channel, - * and start dialing. - */ -static netdev_tx_t -isdn_net_start_xmit(struct sk_buff *skb, struct net_device *ndev) -{ - isdn_net_local *lp = netdev_priv(ndev); -#ifdef CONFIG_ISDN_X25 - struct concap_proto *cprot = lp->netdev->cprot; -/* At this point hard_start_xmit() passes control to the encapsulation - protocol (if present). - For X.25 auto-dialing is completly bypassed because: - - It does not conform with the semantics of a reliable datalink - service as needed by X.25 PLP. - - I don't want that the interface starts dialing when the network layer - sends a message which requests to disconnect the lapb link (or if it - sends any other message not resulting in data transmission). - Instead, dialing will be initiated by the encapsulation protocol entity - when a dl_establish request is received from the upper layer. -*/ - if (cprot && cprot->pops) { - int ret = cprot->pops->encap_and_xmit(cprot, skb); - - if (ret) - netif_stop_queue(ndev); - return ret; - } else -#endif - /* auto-dialing xmit function */ - { -#ifdef ISDN_DEBUG_NET_DUMP - u_char *buf; -#endif - isdn_net_adjust_hdr(skb, ndev); -#ifdef ISDN_DEBUG_NET_DUMP - buf = skb->data; - isdn_dumppkt("S:", buf, skb->len, 40); -#endif - - if (!(lp->flags & ISDN_NET_CONNECTED)) { - int chi; - /* only do autodial if allowed by config */ - if (!(ISDN_NET_DIALMODE(*lp) == ISDN_NET_DM_AUTO)) { - isdn_net_unreachable(ndev, skb, "dial rejected: interface not in dialmode `auto'"); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } - if (lp->phone[1]) { - ulong flags; - - if (lp->dialwait_timer <= 0) - if (lp->dialstarted > 0 && lp->dialtimeout > 0 && time_before(jiffies, lp->dialstarted + lp->dialtimeout + lp->dialwait)) - lp->dialwait_timer = lp->dialstarted + lp->dialtimeout + lp->dialwait; - - if (lp->dialwait_timer > 0) { - if (time_before(jiffies, lp->dialwait_timer)) { - isdn_net_unreachable(ndev, skb, "dial rejected: retry-time not reached"); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } else - lp->dialwait_timer = 0; - } - /* Grab a free ISDN-Channel */ - spin_lock_irqsave(&dev->lock, flags); - if (((chi = - isdn_get_free_channel( - ISDN_USAGE_NET, - lp->l2_proto, - lp->l3_proto, - lp->pre_device, - lp->pre_channel, - lp->msn) - ) < 0) && - ((chi = - isdn_get_free_channel( - ISDN_USAGE_NET, - lp->l2_proto, - lp->l3_proto, - lp->pre_device, - lp->pre_channel^1, - lp->msn) - ) < 0)) { - spin_unlock_irqrestore(&dev->lock, flags); - isdn_net_unreachable(ndev, skb, - "No channel"); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } - /* Log packet, which triggered dialing */ - if (dev->net_verbose) - isdn_net_log_skb(skb, lp); - lp->dialstate = 1; - /* Connect interface with channel */ - isdn_net_bind_channel(lp, chi); -#ifdef CONFIG_ISDN_PPP - if (lp->p_encap == ISDN_NET_ENCAP_SYNCPPP) { - /* no 'first_skb' handling for syncPPP */ - if (isdn_ppp_bind(lp) < 0) { - dev_kfree_skb(skb); - isdn_net_unbind_channel(lp); - spin_unlock_irqrestore(&dev->lock, flags); - return NETDEV_TX_OK; /* STN (skb to nirvana) ;) */ - } -#ifdef CONFIG_IPPP_FILTER - if (isdn_ppp_autodial_filter(skb, lp)) { - isdn_ppp_free(lp); - isdn_net_unbind_channel(lp); - spin_unlock_irqrestore(&dev->lock, flags); - isdn_net_unreachable(ndev, skb, "dial rejected: packet filtered"); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } -#endif - spin_unlock_irqrestore(&dev->lock, flags); - isdn_net_dial(); /* Initiate dialing */ - netif_stop_queue(ndev); - return NETDEV_TX_BUSY; /* let upper layer requeue skb packet */ - } -#endif - /* Initiate dialing */ - spin_unlock_irqrestore(&dev->lock, flags); - isdn_net_dial(); - isdn_net_device_stop_queue(lp); - return NETDEV_TX_BUSY; - } else { - isdn_net_unreachable(ndev, skb, - "No phone number"); - dev_kfree_skb(skb); - return NETDEV_TX_OK; - } - } else { - /* Device is connected to an ISDN channel */ - netif_trans_update(ndev); - if (!lp->dialstate) { - /* ISDN connection is established, try sending */ - int ret; - ret = (isdn_net_xmit(ndev, skb)); - if (ret) netif_stop_queue(ndev); - return ret; - } else - netif_stop_queue(ndev); - } - } - return NETDEV_TX_BUSY; -} - -/* - * Shutdown a net-interface. - */ -static int -isdn_net_close(struct net_device *dev) -{ - struct net_device *p; -#ifdef CONFIG_ISDN_X25 - struct concap_proto *cprot = - ((isdn_net_local *)netdev_priv(dev))->netdev->cprot; - /* printk(KERN_DEBUG "isdn_net_close %s\n" , dev-> name); */ -#endif - -#ifdef CONFIG_ISDN_X25 - if (cprot && cprot->pops) cprot->pops->close(cprot); -#endif - netif_stop_queue(dev); - p = MASTER_TO_SLAVE(dev); - if (p) { - /* If this interface has slaves, stop them also */ - while (p) { -#ifdef CONFIG_ISDN_X25 - cprot = ((isdn_net_local *)netdev_priv(p)) - ->netdev->cprot; - if (cprot && cprot->pops) - cprot->pops->close(cprot); -#endif - isdn_net_hangup(p); - p = MASTER_TO_SLAVE(p); - } - } - isdn_net_hangup(dev); - isdn_unlock_drivers(); - return 0; -} - -/* - * Get statistics - */ -static struct net_device_stats * -isdn_net_get_stats(struct net_device *dev) -{ - isdn_net_local *lp = netdev_priv(dev); - return &lp->stats; -} - -/* This is simply a copy from std. eth.c EXCEPT we pull ETH_HLEN - * instead of dev->hard_header_len off. This is done because the - * lowlevel-driver has already pulled off its stuff when we get - * here and this routine only gets called with p_encap == ETHER. - * Determine the packet's protocol ID. The rule here is that we - * assume 802.3 if the type field is short enough to be a length. - * This is normal practice and works for any 'now in use' protocol. - */ - -static __be16 -isdn_net_type_trans(struct sk_buff *skb, struct net_device *dev) -{ - struct ethhdr *eth; - unsigned char *rawp; - - skb_reset_mac_header(skb); - skb_pull(skb, ETH_HLEN); - eth = eth_hdr(skb); - - if (*eth->h_dest & 1) { - if (ether_addr_equal(eth->h_dest, dev->broadcast)) - skb->pkt_type = PACKET_BROADCAST; - else - skb->pkt_type = PACKET_MULTICAST; - } - /* - * This ALLMULTI check should be redundant by 1.4 - * so don't forget to remove it. - */ - - else if (dev->flags & (IFF_PROMISC /*| IFF_ALLMULTI*/)) { - if (!ether_addr_equal(eth->h_dest, dev->dev_addr)) - skb->pkt_type = PACKET_OTHERHOST; - } - if (ntohs(eth->h_proto) >= ETH_P_802_3_MIN) - return eth->h_proto; - - rawp = skb->data; - - /* - * This is a magic hack to spot IPX packets. Older Novell breaks - * the protocol design and runs IPX over 802.3 without an 802.2 LLC - * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This - * won't work for fault tolerant netware but does for the rest. - */ - if (*(unsigned short *) rawp == 0xFFFF) - return htons(ETH_P_802_3); - /* - * Real 802.2 LLC - */ - return htons(ETH_P_802_2); -} - - -/* - * CISCO HDLC keepalive specific stuff - */ -static struct sk_buff* -isdn_net_ciscohdlck_alloc_skb(isdn_net_local *lp, int len) -{ - unsigned short hl = dev->drv[lp->isdn_device]->interface->hl_hdrlen; - struct sk_buff *skb; - - skb = alloc_skb(hl + len, GFP_ATOMIC); - if (skb) - skb_reserve(skb, hl); - else - printk("isdn out of mem at %s:%d!\n", __FILE__, __LINE__); - return skb; -} - -/* cisco hdlck device private ioctls */ -static int -isdn_ciscohdlck_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - isdn_net_local *lp = netdev_priv(dev); - unsigned long len = 0; - unsigned long expires = 0; - int tmp = 0; - int period = lp->cisco_keepalive_period; - s8 debserint = lp->cisco_debserint; - int rc = 0; - - if (lp->p_encap != ISDN_NET_ENCAP_CISCOHDLCK) - return -EINVAL; - - switch (cmd) { - /* get/set keepalive period */ - case SIOCGKEEPPERIOD: - len = (unsigned long)sizeof(lp->cisco_keepalive_period); - if (copy_to_user(ifr->ifr_data, - &lp->cisco_keepalive_period, len)) - rc = -EFAULT; - break; - case SIOCSKEEPPERIOD: - tmp = lp->cisco_keepalive_period; - len = (unsigned long)sizeof(lp->cisco_keepalive_period); - if (copy_from_user(&period, ifr->ifr_data, len)) - rc = -EFAULT; - if ((period > 0) && (period <= 32767)) - lp->cisco_keepalive_period = period; - else - rc = -EINVAL; - if (!rc && (tmp != lp->cisco_keepalive_period)) { - expires = (unsigned long)(jiffies + - lp->cisco_keepalive_period * HZ); - mod_timer(&lp->cisco_timer, expires); - printk(KERN_INFO "%s: Keepalive period set " - "to %d seconds.\n", - dev->name, lp->cisco_keepalive_period); - } - break; - - /* get/set debugging */ - case SIOCGDEBSERINT: - len = (unsigned long)sizeof(lp->cisco_debserint); - if (copy_to_user(ifr->ifr_data, - &lp->cisco_debserint, len)) - rc = -EFAULT; - break; - case SIOCSDEBSERINT: - len = (unsigned long)sizeof(lp->cisco_debserint); - if (copy_from_user(&debserint, - ifr->ifr_data, len)) - rc = -EFAULT; - if ((debserint >= 0) && (debserint <= 64)) - lp->cisco_debserint = debserint; - else - rc = -EINVAL; - break; - - default: - rc = -EINVAL; - break; - } - return (rc); -} - - -static int isdn_net_ioctl(struct net_device *dev, - struct ifreq *ifr, int cmd) -{ - isdn_net_local *lp = netdev_priv(dev); - - switch (lp->p_encap) { -#ifdef CONFIG_ISDN_PPP - case ISDN_NET_ENCAP_SYNCPPP: - return isdn_ppp_dev_ioctl(dev, ifr, cmd); -#endif - case ISDN_NET_ENCAP_CISCOHDLCK: - return isdn_ciscohdlck_dev_ioctl(dev, ifr, cmd); - default: - return -EINVAL; - } -} - -/* called via cisco_timer.function */ -static void -isdn_net_ciscohdlck_slarp_send_keepalive(struct timer_list *t) -{ - isdn_net_local *lp = from_timer(lp, t, cisco_timer); - struct sk_buff *skb; - unsigned char *p; - unsigned long last_cisco_myseq = lp->cisco_myseq; - int myseq_diff = 0; - - if (!(lp->flags & ISDN_NET_CONNECTED) || lp->dialstate) { - printk("isdn BUG at %s:%d!\n", __FILE__, __LINE__); - return; - } - lp->cisco_myseq++; - - myseq_diff = (lp->cisco_myseq - lp->cisco_mineseen); - if ((lp->cisco_line_state) && ((myseq_diff >= 3) || (myseq_diff <= -3))) { - /* line up -> down */ - lp->cisco_line_state = 0; - printk(KERN_WARNING - "UPDOWN: Line protocol on Interface %s," - " changed state to down\n", lp->netdev->dev->name); - /* should stop routing higher-level data across */ - } else if ((!lp->cisco_line_state) && - (myseq_diff >= 0) && (myseq_diff <= 2)) { - /* line down -> up */ - lp->cisco_line_state = 1; - printk(KERN_WARNING - "UPDOWN: Line protocol on Interface %s," - " changed state to up\n", lp->netdev->dev->name); - /* restart routing higher-level data across */ - } - - if (lp->cisco_debserint) - printk(KERN_DEBUG "%s: HDLC " - "myseq %lu, mineseen %lu%c, yourseen %lu, %s\n", - lp->netdev->dev->name, last_cisco_myseq, lp->cisco_mineseen, - ((last_cisco_myseq == lp->cisco_mineseen) ? '*' : 040), - lp->cisco_yourseq, - ((lp->cisco_line_state) ? "line up" : "line down")); - - skb = isdn_net_ciscohdlck_alloc_skb(lp, 4 + 14); - if (!skb) - return; - - p = skb_put(skb, 4 + 14); - - /* cisco header */ - *(u8 *)(p + 0) = CISCO_ADDR_UNICAST; - *(u8 *)(p + 1) = CISCO_CTRL; - *(__be16 *)(p + 2) = cpu_to_be16(CISCO_TYPE_SLARP); - - /* slarp keepalive */ - *(__be32 *)(p + 4) = cpu_to_be32(CISCO_SLARP_KEEPALIVE); - *(__be32 *)(p + 8) = cpu_to_be32(lp->cisco_myseq); - *(__be32 *)(p + 12) = cpu_to_be32(lp->cisco_yourseq); - *(__be16 *)(p + 16) = cpu_to_be16(0xffff); // reliability, always 0xffff - p += 18; - - isdn_net_write_super(lp, skb); - - lp->cisco_timer.expires = jiffies + lp->cisco_keepalive_period * HZ; - - add_timer(&lp->cisco_timer); -} - -static void -isdn_net_ciscohdlck_slarp_send_request(isdn_net_local *lp) -{ - struct sk_buff *skb; - unsigned char *p; - - skb = isdn_net_ciscohdlck_alloc_skb(lp, 4 + 14); - if (!skb) - return; - - p = skb_put(skb, 4 + 14); - - /* cisco header */ - *(u8 *)(p + 0) = CISCO_ADDR_UNICAST; - *(u8 *)(p + 1) = CISCO_CTRL; - *(__be16 *)(p + 2) = cpu_to_be16(CISCO_TYPE_SLARP); - - /* slarp request */ - *(__be32 *)(p + 4) = cpu_to_be32(CISCO_SLARP_REQUEST); - *(__be32 *)(p + 8) = cpu_to_be32(0); // address - *(__be32 *)(p + 12) = cpu_to_be32(0); // netmask - *(__be16 *)(p + 16) = cpu_to_be16(0); // unused - p += 18; - - isdn_net_write_super(lp, skb); -} - -static void -isdn_net_ciscohdlck_connected(isdn_net_local *lp) -{ - lp->cisco_myseq = 0; - lp->cisco_mineseen = 0; - lp->cisco_yourseq = 0; - lp->cisco_keepalive_period = ISDN_TIMER_KEEPINT; - lp->cisco_last_slarp_in = 0; - lp->cisco_line_state = 0; - lp->cisco_debserint = 0; - - /* send slarp request because interface/seq.no.s reset */ - isdn_net_ciscohdlck_slarp_send_request(lp); - - timer_setup(&lp->cisco_timer, - isdn_net_ciscohdlck_slarp_send_keepalive, 0); - lp->cisco_timer.expires = jiffies + lp->cisco_keepalive_period * HZ; - add_timer(&lp->cisco_timer); -} - -static void -isdn_net_ciscohdlck_disconnected(isdn_net_local *lp) -{ - del_timer(&lp->cisco_timer); -} - -static void -isdn_net_ciscohdlck_slarp_send_reply(isdn_net_local *lp) -{ - struct sk_buff *skb; - unsigned char *p; - struct in_device *in_dev = NULL; - __be32 addr = 0; /* local ipv4 address */ - __be32 mask = 0; /* local netmask */ - - if ((in_dev = lp->netdev->dev->ip_ptr) != NULL) { - /* take primary(first) address of interface */ - struct in_ifaddr *ifa = in_dev->ifa_list; - if (ifa != NULL) { - addr = ifa->ifa_local; - mask = ifa->ifa_mask; - } - } - - skb = isdn_net_ciscohdlck_alloc_skb(lp, 4 + 14); - if (!skb) - return; - - p = skb_put(skb, 4 + 14); - - /* cisco header */ - *(u8 *)(p + 0) = CISCO_ADDR_UNICAST; - *(u8 *)(p + 1) = CISCO_CTRL; - *(__be16 *)(p + 2) = cpu_to_be16(CISCO_TYPE_SLARP); - - /* slarp reply, send own ip/netmask; if values are nonsense remote - * should think we are unable to provide it with an address via SLARP */ - *(__be32 *)(p + 4) = cpu_to_be32(CISCO_SLARP_REPLY); - *(__be32 *)(p + 8) = addr; // address - *(__be32 *)(p + 12) = mask; // netmask - *(__be16 *)(p + 16) = cpu_to_be16(0); // unused - p += 18; - - isdn_net_write_super(lp, skb); -} - -static void -isdn_net_ciscohdlck_slarp_in(isdn_net_local *lp, struct sk_buff *skb) -{ - unsigned char *p; - int period; - u32 code; - u32 my_seq; - u32 your_seq; - __be32 local; - __be32 *addr, *mask; - - if (skb->len < 14) - return; - - p = skb->data; - code = be32_to_cpup((__be32 *)p); - p += 4; - - switch (code) { - case CISCO_SLARP_REQUEST: - lp->cisco_yourseq = 0; - isdn_net_ciscohdlck_slarp_send_reply(lp); - break; - case CISCO_SLARP_REPLY: - addr = (__be32 *)p; - mask = (__be32 *)(p + 4); - if (*mask != cpu_to_be32(0xfffffffc)) - goto slarp_reply_out; - if ((*addr & cpu_to_be32(3)) == cpu_to_be32(0) || - (*addr & cpu_to_be32(3)) == cpu_to_be32(3)) - goto slarp_reply_out; - local = *addr ^ cpu_to_be32(3); - printk(KERN_INFO "%s: got slarp reply: remote ip: %pI4, local ip: %pI4 mask: %pI4\n", - lp->netdev->dev->name, addr, &local, mask); - break; - slarp_reply_out: - printk(KERN_INFO "%s: got invalid slarp reply (%pI4/%pI4) - ignored\n", - lp->netdev->dev->name, addr, mask); - break; - case CISCO_SLARP_KEEPALIVE: - period = (int)((jiffies - lp->cisco_last_slarp_in - + HZ / 2 - 1) / HZ); - if (lp->cisco_debserint && - (period != lp->cisco_keepalive_period) && - lp->cisco_last_slarp_in) { - printk(KERN_DEBUG "%s: Keepalive period mismatch - " - "is %d but should be %d.\n", - lp->netdev->dev->name, period, - lp->cisco_keepalive_period); - } - lp->cisco_last_slarp_in = jiffies; - my_seq = be32_to_cpup((__be32 *)(p + 0)); - your_seq = be32_to_cpup((__be32 *)(p + 4)); - p += 10; - lp->cisco_yourseq = my_seq; - lp->cisco_mineseen = your_seq; - break; - } -} - -static void -isdn_net_ciscohdlck_receive(isdn_net_local *lp, struct sk_buff *skb) -{ - unsigned char *p; - u8 addr; - u8 ctrl; - u16 type; - - if (skb->len < 4) - goto out_free; - - p = skb->data; - addr = *(u8 *)(p + 0); - ctrl = *(u8 *)(p + 1); - type = be16_to_cpup((__be16 *)(p + 2)); - p += 4; - skb_pull(skb, 4); - - if (addr != CISCO_ADDR_UNICAST && addr != CISCO_ADDR_BROADCAST) { - printk(KERN_WARNING "%s: Unknown Cisco addr 0x%02x\n", - lp->netdev->dev->name, addr); - goto out_free; - } - if (ctrl != CISCO_CTRL) { - printk(KERN_WARNING "%s: Unknown Cisco ctrl 0x%02x\n", - lp->netdev->dev->name, ctrl); - goto out_free; - } - - switch (type) { - case CISCO_TYPE_SLARP: - isdn_net_ciscohdlck_slarp_in(lp, skb); - goto out_free; - case CISCO_TYPE_CDP: - if (lp->cisco_debserint) - printk(KERN_DEBUG "%s: Received CDP packet. use " - "\"no cdp enable\" on cisco.\n", - lp->netdev->dev->name); - goto out_free; - default: - /* no special cisco protocol */ - skb->protocol = htons(type); - netif_rx(skb); - return; - } - -out_free: - kfree_skb(skb); -} - -/* - * Got a packet from ISDN-Channel. - */ -static void -isdn_net_receive(struct net_device *ndev, struct sk_buff *skb) -{ - isdn_net_local *lp = netdev_priv(ndev); - isdn_net_local *olp = lp; /* original 'lp' */ -#ifdef CONFIG_ISDN_X25 - struct concap_proto *cprot = lp->netdev->cprot; -#endif - lp->transcount += skb->len; - - lp->stats.rx_packets++; - lp->stats.rx_bytes += skb->len; - if (lp->master) { - /* Bundling: If device is a slave-device, deliver to master, also - * handle master's statistics and hangup-timeout - */ - ndev = lp->master; - lp = netdev_priv(ndev); - lp->stats.rx_packets++; - lp->stats.rx_bytes += skb->len; - } - skb->dev = ndev; - skb->pkt_type = PACKET_HOST; - skb_reset_mac_header(skb); -#ifdef ISDN_DEBUG_NET_DUMP - isdn_dumppkt("R:", skb->data, skb->len, 40); -#endif - switch (lp->p_encap) { - case ISDN_NET_ENCAP_ETHER: - /* Ethernet over ISDN */ - olp->huptimer = 0; - lp->huptimer = 0; - skb->protocol = isdn_net_type_trans(skb, ndev); - break; - case ISDN_NET_ENCAP_UIHDLC: - /* HDLC with UI-frame (for ispa with -h1 option) */ - olp->huptimer = 0; - lp->huptimer = 0; - skb_pull(skb, 2); - /* Fall through */ - case ISDN_NET_ENCAP_RAWIP: - /* RAW-IP without MAC-Header */ - olp->huptimer = 0; - lp->huptimer = 0; - skb->protocol = htons(ETH_P_IP); - break; - case ISDN_NET_ENCAP_CISCOHDLCK: - isdn_net_ciscohdlck_receive(lp, skb); - return; - case ISDN_NET_ENCAP_CISCOHDLC: - /* CISCO-HDLC IP with type field and fake I-frame-header */ - skb_pull(skb, 2); - /* Fall through */ - case ISDN_NET_ENCAP_IPTYP: - /* IP with type field */ - olp->huptimer = 0; - lp->huptimer = 0; - skb->protocol = *(__be16 *)&(skb->data[0]); - skb_pull(skb, 2); - if (*(unsigned short *) skb->data == 0xFFFF) - skb->protocol = htons(ETH_P_802_3); - break; -#ifdef CONFIG_ISDN_PPP - case ISDN_NET_ENCAP_SYNCPPP: - /* huptimer is done in isdn_ppp_push_higher */ - isdn_ppp_receive(lp->netdev, olp, skb); - return; -#endif - - default: -#ifdef CONFIG_ISDN_X25 - /* try if there are generic sync_device receiver routines */ - if (cprot) if (cprot->pops) - if (cprot->pops->data_ind) { - cprot->pops->data_ind(cprot, skb); - return; - }; -#endif /* CONFIG_ISDN_X25 */ - printk(KERN_WARNING "%s: unknown encapsulation, dropping\n", - lp->netdev->dev->name); - kfree_skb(skb); - return; - } - - netif_rx(skb); - return; -} - -/* - * A packet arrived via ISDN. Search interface-chain for a corresponding - * interface. If found, deliver packet to receiver-function and return 1, - * else return 0. - */ -int -isdn_net_rcv_skb(int idx, struct sk_buff *skb) -{ - isdn_net_dev *p = dev->rx_netdev[idx]; - - if (p) { - isdn_net_local *lp = p->local; - if ((lp->flags & ISDN_NET_CONNECTED) && - (!lp->dialstate)) { - isdn_net_receive(p->dev, skb); - return 1; - } - } - return 0; -} - -/* - * build an header - * depends on encaps that is being used. - */ - -static int isdn_net_header(struct sk_buff *skb, struct net_device *dev, - unsigned short type, - const void *daddr, const void *saddr, unsigned plen) -{ - isdn_net_local *lp = netdev_priv(dev); - unsigned char *p; - int len = 0; - - switch (lp->p_encap) { - case ISDN_NET_ENCAP_ETHER: - len = eth_header(skb, dev, type, daddr, saddr, plen); - break; -#ifdef CONFIG_ISDN_PPP - case ISDN_NET_ENCAP_SYNCPPP: - /* stick on a fake header to keep fragmentation code happy. */ - len = IPPP_MAX_HEADER; - skb_push(skb, len); - break; -#endif - case ISDN_NET_ENCAP_RAWIP: - printk(KERN_WARNING "isdn_net_header called with RAW_IP!\n"); - len = 0; - break; - case ISDN_NET_ENCAP_IPTYP: - /* ethernet type field */ - *((__be16 *)skb_push(skb, 2)) = htons(type); - len = 2; - break; - case ISDN_NET_ENCAP_UIHDLC: - /* HDLC with UI-Frames (for ispa with -h1 option) */ - *((__be16 *)skb_push(skb, 2)) = htons(0x0103); - len = 2; - break; - case ISDN_NET_ENCAP_CISCOHDLC: - case ISDN_NET_ENCAP_CISCOHDLCK: - p = skb_push(skb, 4); - *(u8 *)(p + 0) = CISCO_ADDR_UNICAST; - *(u8 *)(p + 1) = CISCO_CTRL; - *(__be16 *)(p + 2) = cpu_to_be16(type); - p += 4; - len = 4; - break; -#ifdef CONFIG_ISDN_X25 - default: - /* try if there are generic concap protocol routines */ - if (lp->netdev->cprot) { - printk(KERN_WARNING "isdn_net_header called with concap_proto!\n"); - len = 0; - break; - } - break; -#endif /* CONFIG_ISDN_X25 */ - } - return len; -} - -static int isdn_header_cache(const struct neighbour *neigh, struct hh_cache *hh, - __be16 type) -{ - const struct net_device *dev = neigh->dev; - isdn_net_local *lp = netdev_priv(dev); - - if (lp->p_encap == ISDN_NET_ENCAP_ETHER) - return eth_header_cache(neigh, hh, type); - return -1; -} - -static void isdn_header_cache_update(struct hh_cache *hh, - const struct net_device *dev, - const unsigned char *haddr) -{ - isdn_net_local *lp = netdev_priv(dev); - if (lp->p_encap == ISDN_NET_ENCAP_ETHER) - eth_header_cache_update(hh, dev, haddr); -} - -static const struct header_ops isdn_header_ops = { - .create = isdn_net_header, - .cache = isdn_header_cache, - .cache_update = isdn_header_cache_update, -}; - -/* - * Interface-setup. (just after registering a new interface) - */ -static int -isdn_net_init(struct net_device *ndev) -{ - ushort max_hlhdr_len = 0; - int drvidx; - - /* - * up till binding we ask the protocol layer to reserve as much - * as we might need for HL layer - */ - - for (drvidx = 0; drvidx < ISDN_MAX_DRIVERS; drvidx++) - if (dev->drv[drvidx]) - if (max_hlhdr_len < dev->drv[drvidx]->interface->hl_hdrlen) - max_hlhdr_len = dev->drv[drvidx]->interface->hl_hdrlen; - - ndev->hard_header_len = ETH_HLEN + max_hlhdr_len; - return 0; -} - -static void -isdn_net_swapbind(int drvidx) -{ - isdn_net_dev *p; - -#ifdef ISDN_DEBUG_NET_ICALL - printk(KERN_DEBUG "n_fi: swapping ch of %d\n", drvidx); -#endif - p = dev->netdev; - while (p) { - if (p->local->pre_device == drvidx) - switch (p->local->pre_channel) { - case 0: - p->local->pre_channel = 1; - break; - case 1: - p->local->pre_channel = 0; - break; - } - p = (isdn_net_dev *) p->next; - } -} - -static void -isdn_net_swap_usage(int i1, int i2) -{ - int u1 = dev->usage[i1] & ISDN_USAGE_EXCLUSIVE; - int u2 = dev->usage[i2] & ISDN_USAGE_EXCLUSIVE; - -#ifdef ISDN_DEBUG_NET_ICALL - printk(KERN_DEBUG "n_fi: usage of %d and %d\n", i1, i2); -#endif - dev->usage[i1] &= ~ISDN_USAGE_EXCLUSIVE; - dev->usage[i1] |= u2; - dev->usage[i2] &= ~ISDN_USAGE_EXCLUSIVE; - dev->usage[i2] |= u1; - isdn_info_update(); -} - -/* - * An incoming call-request has arrived. - * Search the interface-chain for an appropriate interface. - * If found, connect the interface to the ISDN-channel and initiate - * D- and B-Channel-setup. If secure-flag is set, accept only - * configured phone-numbers. If callback-flag is set, initiate - * callback-dialing. - * - * Return-Value: 0 = No appropriate interface for this call. - * 1 = Call accepted - * 2 = Reject call, wait cbdelay, then call back - * 3 = Reject call - * 4 = Wait cbdelay, then call back - * 5 = No appropriate interface for this call, - * would eventually match if CID was longer. - */ - -int -isdn_net_find_icall(int di, int ch, int idx, setup_parm *setup) -{ - char *eaz; - int si1; - int si2; - int ematch; - int wret; - int swapped; - int sidx = 0; - u_long flags; - isdn_net_dev *p; - isdn_net_phone *n; - char nr[ISDN_MSNLEN]; - char *my_eaz; - - /* Search name in netdev-chain */ - if (!setup->phone[0]) { - nr[0] = '0'; - nr[1] = '\0'; - printk(KERN_INFO "isdn_net: Incoming call without OAD, assuming '0'\n"); - } else - strlcpy(nr, setup->phone, ISDN_MSNLEN); - si1 = (int) setup->si1; - si2 = (int) setup->si2; - if (!setup->eazmsn[0]) { - printk(KERN_WARNING "isdn_net: Incoming call without CPN, assuming '0'\n"); - eaz = "0"; - } else - eaz = setup->eazmsn; - if (dev->net_verbose > 1) - printk(KERN_INFO "isdn_net: call from %s,%d,%d -> %s\n", nr, si1, si2, eaz); - /* Accept DATA and VOICE calls at this stage - * local eaz is checked later for allowed call types - */ - if ((si1 != 7) && (si1 != 1)) { - if (dev->net_verbose > 1) - printk(KERN_INFO "isdn_net: Service-Indicator not 1 or 7, ignored\n"); - return 0; - } - n = (isdn_net_phone *) 0; - p = dev->netdev; - ematch = wret = swapped = 0; -#ifdef ISDN_DEBUG_NET_ICALL - printk(KERN_DEBUG "n_fi: di=%d ch=%d idx=%d usg=%d\n", di, ch, idx, - dev->usage[idx]); -#endif - while (p) { - int matchret; - isdn_net_local *lp = p->local; - - /* If last check has triggered as binding-swap, revert it */ - switch (swapped) { - case 2: - isdn_net_swap_usage(idx, sidx); - /* fall through */ - case 1: - isdn_net_swapbind(di); - break; - } - swapped = 0; - /* check acceptable call types for DOV */ - my_eaz = isdn_map_eaz2msn(lp->msn, di); - if (si1 == 1) { /* it's a DOV call, check if we allow it */ - if (*my_eaz == 'v' || *my_eaz == 'V' || - *my_eaz == 'b' || *my_eaz == 'B') - my_eaz++; /* skip to allow a match */ - else - my_eaz = NULL; /* force non match */ - } else { /* it's a DATA call, check if we allow it */ - if (*my_eaz == 'b' || *my_eaz == 'B') - my_eaz++; /* skip to allow a match */ - } - if (my_eaz) - matchret = isdn_msncmp(eaz, my_eaz); - else - matchret = 1; - if (!matchret) - ematch = 1; - - /* Remember if more numbers eventually can match */ - if (matchret > wret) - wret = matchret; -#ifdef ISDN_DEBUG_NET_ICALL - printk(KERN_DEBUG "n_fi: if='%s', l.msn=%s, l.flags=%d, l.dstate=%d\n", - p->dev->name, lp->msn, lp->flags, lp->dialstate); -#endif - if ((!matchret) && /* EAZ is matching */ - (((!(lp->flags & ISDN_NET_CONNECTED)) && /* but not connected */ - (USG_NONE(dev->usage[idx]))) || /* and ch. unused or */ - ((((lp->dialstate == 4) || (lp->dialstate == 12)) && /* if dialing */ - (!(lp->flags & ISDN_NET_CALLBACK))) /* but no callback */ - ))) - { -#ifdef ISDN_DEBUG_NET_ICALL - printk(KERN_DEBUG "n_fi: match1, pdev=%d pch=%d\n", - lp->pre_device, lp->pre_channel); -#endif - if (dev->usage[idx] & ISDN_USAGE_EXCLUSIVE) { - if ((lp->pre_channel != ch) || - (lp->pre_device != di)) { - /* Here we got a problem: - * If using an ICN-Card, an incoming call is always signaled on - * on the first channel of the card, if both channels are - * down. However this channel may be bound exclusive. If the - * second channel is free, this call should be accepted. - * The solution is horribly but it runs, so what: - * We exchange the exclusive bindings of the two channels, the - * corresponding variables in the interface-structs. - */ - if (ch == 0) { - sidx = isdn_dc2minor(di, 1); -#ifdef ISDN_DEBUG_NET_ICALL - printk(KERN_DEBUG "n_fi: ch is 0\n"); -#endif - if (USG_NONE(dev->usage[sidx])) { - /* Second Channel is free, now see if it is bound - * exclusive too. */ - if (dev->usage[sidx] & ISDN_USAGE_EXCLUSIVE) { -#ifdef ISDN_DEBUG_NET_ICALL - printk(KERN_DEBUG "n_fi: 2nd channel is down and bound\n"); -#endif - /* Yes, swap bindings only, if the original - * binding is bound to channel 1 of this driver */ - if ((lp->pre_device == di) && - (lp->pre_channel == 1)) { - isdn_net_swapbind(di); - swapped = 1; - } else { - /* ... else iterate next device */ - p = (isdn_net_dev *) p->next; - continue; - } - } else { -#ifdef ISDN_DEBUG_NET_ICALL - printk(KERN_DEBUG "n_fi: 2nd channel is down and unbound\n"); -#endif - /* No, swap always and swap excl-usage also */ - isdn_net_swap_usage(idx, sidx); - isdn_net_swapbind(di); - swapped = 2; - } - /* Now check for exclusive binding again */ -#ifdef ISDN_DEBUG_NET_ICALL - printk(KERN_DEBUG "n_fi: final check\n"); -#endif - if ((dev->usage[idx] & ISDN_USAGE_EXCLUSIVE) && - ((lp->pre_channel != ch) || - (lp->pre_device != di))) { -#ifdef ISDN_DEBUG_NET_ICALL - printk(KERN_DEBUG "n_fi: final check failed\n"); -#endif - p = (isdn_net_dev *) p->next; - continue; - } - } - } else { - /* We are already on the second channel, so nothing to do */ -#ifdef ISDN_DEBUG_NET_ICALL - printk(KERN_DEBUG "n_fi: already on 2nd channel\n"); -#endif - } - } - } -#ifdef ISDN_DEBUG_NET_ICALL - printk(KERN_DEBUG "n_fi: match2\n"); -#endif - n = lp->phone[0]; - if (lp->flags & ISDN_NET_SECURE) { - while (n) { - if (!isdn_msncmp(nr, n->num)) - break; - n = (isdn_net_phone *) n->next; - } - } - if (n || (!(lp->flags & ISDN_NET_SECURE))) { -#ifdef ISDN_DEBUG_NET_ICALL - printk(KERN_DEBUG "n_fi: match3\n"); -#endif - /* matching interface found */ - - /* - * Is the state STOPPED? - * If so, no dialin is allowed, - * so reject actively. - * */ - if (ISDN_NET_DIALMODE(*lp) == ISDN_NET_DM_OFF) { - printk(KERN_INFO "incoming call, interface %s `stopped' -> rejected\n", - p->dev->name); - return 3; - } - /* - * Is the interface up? - * If not, reject the call actively. - */ - if (!isdn_net_device_started(p)) { - printk(KERN_INFO "%s: incoming call, interface down -> rejected\n", - p->dev->name); - return 3; - } - /* Interface is up, now see if it's a slave. If so, see if - * it's master and parent slave is online. If not, reject the call. - */ - if (lp->master) { - isdn_net_local *mlp = ISDN_MASTER_PRIV(lp); - printk(KERN_DEBUG "ICALLslv: %s\n", p->dev->name); - printk(KERN_DEBUG "master=%s\n", lp->master->name); - if (mlp->flags & ISDN_NET_CONNECTED) { - printk(KERN_DEBUG "master online\n"); - /* Master is online, find parent-slave (master if first slave) */ - while (mlp->slave) { - if (ISDN_SLAVE_PRIV(mlp) == lp) - break; - mlp = ISDN_SLAVE_PRIV(mlp); - } - } else - printk(KERN_DEBUG "master offline\n"); - /* Found parent, if it's offline iterate next device */ - printk(KERN_DEBUG "mlpf: %d\n", mlp->flags & ISDN_NET_CONNECTED); - if (!(mlp->flags & ISDN_NET_CONNECTED)) { - p = (isdn_net_dev *) p->next; - continue; - } - } - if (lp->flags & ISDN_NET_CALLBACK) { - int chi; - /* - * Is the state MANUAL? - * If so, no callback can be made, - * so reject actively. - * */ - if (ISDN_NET_DIALMODE(*lp) == ISDN_NET_DM_OFF) { - printk(KERN_INFO "incoming call for callback, interface %s `off' -> rejected\n", - p->dev->name); - return 3; - } - printk(KERN_DEBUG "%s: call from %s -> %s, start callback\n", - p->dev->name, nr, eaz); - if (lp->phone[1]) { - /* Grab a free ISDN-Channel */ - spin_lock_irqsave(&dev->lock, flags); - if ((chi = - isdn_get_free_channel( - ISDN_USAGE_NET, - lp->l2_proto, - lp->l3_proto, - lp->pre_device, - lp->pre_channel, - lp->msn) - ) < 0) { - - printk(KERN_WARNING "isdn_net_find_icall: No channel for %s\n", - p->dev->name); - spin_unlock_irqrestore(&dev->lock, flags); - return 0; - } - /* Setup dialstate. */ - lp->dtimer = 0; - lp->dialstate = 11; - /* Connect interface with channel */ - isdn_net_bind_channel(lp, chi); -#ifdef CONFIG_ISDN_PPP - if (lp->p_encap == ISDN_NET_ENCAP_SYNCPPP) - if (isdn_ppp_bind(lp) < 0) { - spin_unlock_irqrestore(&dev->lock, flags); - isdn_net_unbind_channel(lp); - return 0; - } -#endif - spin_unlock_irqrestore(&dev->lock, flags); - /* Initiate dialing by returning 2 or 4 */ - return (lp->flags & ISDN_NET_CBHUP) ? 2 : 4; - } else - printk(KERN_WARNING "isdn_net: %s: No phone number\n", - p->dev->name); - return 0; - } else { - printk(KERN_DEBUG "%s: call from %s -> %s accepted\n", - p->dev->name, nr, eaz); - /* if this interface is dialing, it does it probably on a different - device, so free this device */ - if ((lp->dialstate == 4) || (lp->dialstate == 12)) { -#ifdef CONFIG_ISDN_PPP - if (lp->p_encap == ISDN_NET_ENCAP_SYNCPPP) - isdn_ppp_free(lp); -#endif - isdn_net_lp_disconnected(lp); - isdn_free_channel(lp->isdn_device, lp->isdn_channel, - ISDN_USAGE_NET); - } - spin_lock_irqsave(&dev->lock, flags); - dev->usage[idx] &= ISDN_USAGE_EXCLUSIVE; - dev->usage[idx] |= ISDN_USAGE_NET; - strcpy(dev->num[idx], nr); - isdn_info_update(); - dev->st_netdev[idx] = lp->netdev; - lp->isdn_device = di; - lp->isdn_channel = ch; - lp->ppp_slot = -1; - lp->flags |= ISDN_NET_CONNECTED; - lp->dialstate = 7; - lp->dtimer = 0; - lp->outgoing = 0; - lp->huptimer = 0; - lp->hupflags |= ISDN_WAITCHARGE; - lp->hupflags &= ~ISDN_HAVECHARGE; -#ifdef CONFIG_ISDN_PPP - if (lp->p_encap == ISDN_NET_ENCAP_SYNCPPP) { - if (isdn_ppp_bind(lp) < 0) { - isdn_net_unbind_channel(lp); - spin_unlock_irqrestore(&dev->lock, flags); - return 0; - } - } -#endif - spin_unlock_irqrestore(&dev->lock, flags); - return 1; - } - } - } - p = (isdn_net_dev *) p->next; - } - /* If none of configured EAZ/MSN matched and not verbose, be silent */ - if (!ematch || dev->net_verbose) - printk(KERN_INFO "isdn_net: call from %s -> %d %s ignored\n", nr, di, eaz); - return (wret == 2) ? 5 : 0; -} - -/* - * Search list of net-interfaces for an interface with given name. - */ -isdn_net_dev * -isdn_net_findif(char *name) -{ - isdn_net_dev *p = dev->netdev; - - while (p) { - if (!strcmp(p->dev->name, name)) - return p; - p = (isdn_net_dev *) p->next; - } - return (isdn_net_dev *) NULL; -} - -/* - * Force a net-interface to dial out. - * This is called from the userlevel-routine below or - * from isdn_net_start_xmit(). - */ -static int -isdn_net_force_dial_lp(isdn_net_local *lp) -{ - if ((!(lp->flags & ISDN_NET_CONNECTED)) && !lp->dialstate) { - int chi; - if (lp->phone[1]) { - ulong flags; - - /* Grab a free ISDN-Channel */ - spin_lock_irqsave(&dev->lock, flags); - if ((chi = isdn_get_free_channel( - ISDN_USAGE_NET, - lp->l2_proto, - lp->l3_proto, - lp->pre_device, - lp->pre_channel, - lp->msn)) < 0) { - printk(KERN_WARNING "isdn_net_force_dial: No channel for %s\n", - lp->netdev->dev->name); - spin_unlock_irqrestore(&dev->lock, flags); - return -EAGAIN; - } - lp->dialstate = 1; - /* Connect interface with channel */ - isdn_net_bind_channel(lp, chi); -#ifdef CONFIG_ISDN_PPP - if (lp->p_encap == ISDN_NET_ENCAP_SYNCPPP) - if (isdn_ppp_bind(lp) < 0) { - isdn_net_unbind_channel(lp); - spin_unlock_irqrestore(&dev->lock, flags); - return -EAGAIN; - } -#endif - /* Initiate dialing */ - spin_unlock_irqrestore(&dev->lock, flags); - isdn_net_dial(); - return 0; - } else - return -EINVAL; - } else - return -EBUSY; -} - -/* - * This is called from certain upper protocol layers (multilink ppp - * and x25iface encapsulation module) that want to initiate dialing - * themselves. - */ -int -isdn_net_dial_req(isdn_net_local *lp) -{ - /* is there a better error code? */ - if (!(ISDN_NET_DIALMODE(*lp) == ISDN_NET_DM_AUTO)) return -EBUSY; - - return isdn_net_force_dial_lp(lp); -} - -/* - * Force a net-interface to dial out. - * This is always called from within userspace (ISDN_IOCTL_NET_DIAL). - */ -int -isdn_net_force_dial(char *name) -{ - isdn_net_dev *p = isdn_net_findif(name); - - if (!p) - return -ENODEV; - return (isdn_net_force_dial_lp(p->local)); -} - -/* The ISDN-specific entries in the device structure. */ -static const struct net_device_ops isdn_netdev_ops = { - .ndo_init = isdn_net_init, - .ndo_open = isdn_net_open, - .ndo_stop = isdn_net_close, - .ndo_do_ioctl = isdn_net_ioctl, - - .ndo_start_xmit = isdn_net_start_xmit, - .ndo_get_stats = isdn_net_get_stats, - .ndo_tx_timeout = isdn_net_tx_timeout, -}; - -/* - * Helper for alloc_netdev() - */ -static void _isdn_setup(struct net_device *dev) -{ - isdn_net_local *lp = netdev_priv(dev); - - ether_setup(dev); - - /* Setup the generic properties */ - dev->flags = IFF_NOARP | IFF_POINTOPOINT; - - /* isdn prepends a header in the tx path, can't share skbs */ - dev->priv_flags &= ~IFF_TX_SKB_SHARING; - dev->header_ops = NULL; - dev->netdev_ops = &isdn_netdev_ops; - - /* for clients with MPPP maybe higher values better */ - dev->tx_queue_len = 30; - - lp->p_encap = ISDN_NET_ENCAP_RAWIP; - lp->magic = ISDN_NET_MAGIC; - lp->last = lp; - lp->next = lp; - lp->isdn_device = -1; - lp->isdn_channel = -1; - lp->pre_device = -1; - lp->pre_channel = -1; - lp->exclusive = -1; - lp->ppp_slot = -1; - lp->pppbind = -1; - skb_queue_head_init(&lp->super_tx_queue); - lp->l2_proto = ISDN_PROTO_L2_X75I; - lp->l3_proto = ISDN_PROTO_L3_TRANS; - lp->triggercps = 6000; - lp->slavedelay = 10 * HZ; - lp->hupflags = ISDN_INHUP; /* Do hangup even on incoming calls */ - lp->onhtime = 10; /* Default hangup-time for saving costs */ - lp->dialmax = 1; - /* Hangup before Callback, manual dial */ - lp->flags = ISDN_NET_CBHUP | ISDN_NET_DM_MANUAL; - lp->cbdelay = 25; /* Wait 5 secs before Callback */ - lp->dialtimeout = -1; /* Infinite Dial-Timeout */ - lp->dialwait = 5 * HZ; /* Wait 5 sec. after failed dial */ - lp->dialstarted = 0; /* Jiffies of last dial-start */ - lp->dialwait_timer = 0; /* Jiffies of earliest next dial-start */ -} - -/* - * Allocate a new network-interface and initialize its data structures. - */ -char * -isdn_net_new(char *name, struct net_device *master) -{ - isdn_net_dev *netdev; - - /* Avoid creating an existing interface */ - if (isdn_net_findif(name)) { - printk(KERN_WARNING "isdn_net: interface %s already exists\n", name); - return NULL; - } - if (name == NULL) - return NULL; - if (!(netdev = kzalloc(sizeof(isdn_net_dev), GFP_KERNEL))) { - printk(KERN_WARNING "isdn_net: Could not allocate net-device\n"); - return NULL; - } - netdev->dev = alloc_netdev(sizeof(isdn_net_local), name, - NET_NAME_UNKNOWN, _isdn_setup); - if (!netdev->dev) { - printk(KERN_WARNING "isdn_net: Could not allocate network device\n"); - kfree(netdev); - return NULL; - } - netdev->local = netdev_priv(netdev->dev); - - if (master) { - /* Device shall be a slave */ - struct net_device *p = MASTER_TO_SLAVE(master); - struct net_device *q = master; - - netdev->local->master = master; - /* Put device at end of slave-chain */ - while (p) { - q = p; - p = MASTER_TO_SLAVE(p); - } - MASTER_TO_SLAVE(q) = netdev->dev; - } else { - /* Device shall be a master */ - /* - * Watchdog timer (currently) for master only. - */ - netdev->dev->watchdog_timeo = ISDN_NET_TX_TIMEOUT; - if (register_netdev(netdev->dev) != 0) { - printk(KERN_WARNING "isdn_net: Could not register net-device\n"); - free_netdev(netdev->dev); - kfree(netdev); - return NULL; - } - } - netdev->queue = netdev->local; - spin_lock_init(&netdev->queue_lock); - - netdev->local->netdev = netdev; - - INIT_WORK(&netdev->local->tqueue, isdn_net_softint); - spin_lock_init(&netdev->local->xmit_lock); - - /* Put into to netdev-chain */ - netdev->next = (void *) dev->netdev; - dev->netdev = netdev; - return netdev->dev->name; -} - -char * -isdn_net_newslave(char *parm) -{ - char *p = strchr(parm, ','); - isdn_net_dev *n; - char newname[10]; - - if (p) { - /* Slave-Name MUST not be empty or overflow 'newname' */ - if (strscpy(newname, p + 1, sizeof(newname)) <= 0) - return NULL; - *p = 0; - /* Master must already exist */ - if (!(n = isdn_net_findif(parm))) - return NULL; - /* Master must be a real interface, not a slave */ - if (n->local->master) - return NULL; - /* Master must not be started yet */ - if (isdn_net_device_started(n)) - return NULL; - return (isdn_net_new(newname, n->dev)); - } - return NULL; -} - -/* - * Set interface-parameters. - * Always set all parameters, so the user-level application is responsible - * for not overwriting existing setups. It has to get the current - * setup first, if only selected parameters are to be changed. - */ -int -isdn_net_setcfg(isdn_net_ioctl_cfg *cfg) -{ - isdn_net_dev *p = isdn_net_findif(cfg->name); - ulong features; - int i; - int drvidx; - int chidx; - char drvid[25]; - - if (p) { - isdn_net_local *lp = p->local; - - /* See if any registered driver supports the features we want */ - features = ((1 << cfg->l2_proto) << ISDN_FEATURE_L2_SHIFT) | - ((1 << cfg->l3_proto) << ISDN_FEATURE_L3_SHIFT); - for (i = 0; i < ISDN_MAX_DRIVERS; i++) - if (dev->drv[i]) - if ((dev->drv[i]->interface->features & features) == features) - break; - if (i == ISDN_MAX_DRIVERS) { - printk(KERN_WARNING "isdn_net: No driver with selected features\n"); - return -ENODEV; - } - if (lp->p_encap != cfg->p_encap) { -#ifdef CONFIG_ISDN_X25 - struct concap_proto *cprot = p->cprot; -#endif - if (isdn_net_device_started(p)) { - printk(KERN_WARNING "%s: cannot change encap when if is up\n", - p->dev->name); - return -EBUSY; - } -#ifdef CONFIG_ISDN_X25 - if (cprot && cprot->pops) - cprot->pops->proto_del(cprot); - p->cprot = NULL; - lp->dops = NULL; - /* ... , prepare for configuration of new one ... */ - switch (cfg->p_encap) { - case ISDN_NET_ENCAP_X25IFACE: - lp->dops = &isdn_concap_reliable_dl_dops; - } - /* ... and allocate new one ... */ - p->cprot = isdn_concap_new(cfg->p_encap); - /* p -> cprot == NULL now if p_encap is not supported - by means of the concap_proto mechanism */ - /* the protocol is not configured yet; this will - happen later when isdn_net_reset() is called */ -#endif - } - switch (cfg->p_encap) { - case ISDN_NET_ENCAP_SYNCPPP: -#ifndef CONFIG_ISDN_PPP - printk(KERN_WARNING "%s: SyncPPP support not configured\n", - p->dev->name); - return -EINVAL; -#else - p->dev->type = ARPHRD_PPP; /* change ARP type */ - p->dev->addr_len = 0; -#endif - break; - case ISDN_NET_ENCAP_X25IFACE: -#ifndef CONFIG_ISDN_X25 - printk(KERN_WARNING "%s: isdn-x25 support not configured\n", - p->dev->name); - return -EINVAL; -#else - p->dev->type = ARPHRD_X25; /* change ARP type */ - p->dev->addr_len = 0; -#endif - break; - case ISDN_NET_ENCAP_CISCOHDLCK: - break; - default: - if (cfg->p_encap >= 0 && - cfg->p_encap <= ISDN_NET_ENCAP_MAX_ENCAP) - break; - printk(KERN_WARNING - "%s: encapsulation protocol %d not supported\n", - p->dev->name, cfg->p_encap); - return -EINVAL; - } - if (strlen(cfg->drvid)) { - /* A bind has been requested ... */ - char *c, - *e; - - if (strnlen(cfg->drvid, sizeof(cfg->drvid)) == - sizeof(cfg->drvid)) - return -EINVAL; - drvidx = -1; - chidx = -1; - strcpy(drvid, cfg->drvid); - if ((c = strchr(drvid, ','))) { - /* The channel-number is appended to the driver-Id with a comma */ - chidx = (int) simple_strtoul(c + 1, &e, 10); - if (e == c) - chidx = -1; - *c = '\0'; - } - for (i = 0; i < ISDN_MAX_DRIVERS; i++) - /* Lookup driver-Id in array */ - if (!(strcmp(dev->drvid[i], drvid))) { - drvidx = i; - break; - } - if ((drvidx == -1) || (chidx == -1)) - /* Either driver-Id or channel-number invalid */ - return -ENODEV; - } else { - /* Parameters are valid, so get them */ - drvidx = lp->pre_device; - chidx = lp->pre_channel; - } - if (cfg->exclusive > 0) { - unsigned long flags; - - /* If binding is exclusive, try to grab the channel */ - spin_lock_irqsave(&dev->lock, flags); - if ((i = isdn_get_free_channel(ISDN_USAGE_NET, - lp->l2_proto, lp->l3_proto, drvidx, - chidx, lp->msn)) < 0) { - /* Grab failed, because desired channel is in use */ - lp->exclusive = -1; - spin_unlock_irqrestore(&dev->lock, flags); - return -EBUSY; - } - /* All went ok, so update isdninfo */ - dev->usage[i] = ISDN_USAGE_EXCLUSIVE; - isdn_info_update(); - spin_unlock_irqrestore(&dev->lock, flags); - lp->exclusive = i; - } else { - /* Non-exclusive binding or unbind. */ - lp->exclusive = -1; - if ((lp->pre_device != -1) && (cfg->exclusive == -1)) { - isdn_unexclusive_channel(lp->pre_device, lp->pre_channel); - isdn_free_channel(lp->pre_device, lp->pre_channel, ISDN_USAGE_NET); - drvidx = -1; - chidx = -1; - } - } - strlcpy(lp->msn, cfg->eaz, sizeof(lp->msn)); - lp->pre_device = drvidx; - lp->pre_channel = chidx; - lp->onhtime = cfg->onhtime; - lp->charge = cfg->charge; - lp->l2_proto = cfg->l2_proto; - lp->l3_proto = cfg->l3_proto; - lp->cbdelay = cfg->cbdelay; - lp->dialmax = cfg->dialmax; - lp->triggercps = cfg->triggercps; - lp->slavedelay = cfg->slavedelay * HZ; - lp->pppbind = cfg->pppbind; - lp->dialtimeout = cfg->dialtimeout >= 0 ? cfg->dialtimeout * HZ : -1; - lp->dialwait = cfg->dialwait * HZ; - if (cfg->secure) - lp->flags |= ISDN_NET_SECURE; - else - lp->flags &= ~ISDN_NET_SECURE; - if (cfg->cbhup) - lp->flags |= ISDN_NET_CBHUP; - else - lp->flags &= ~ISDN_NET_CBHUP; - switch (cfg->callback) { - case 0: - lp->flags &= ~(ISDN_NET_CALLBACK | ISDN_NET_CBOUT); - break; - case 1: - lp->flags |= ISDN_NET_CALLBACK; - lp->flags &= ~ISDN_NET_CBOUT; - break; - case 2: - lp->flags |= ISDN_NET_CBOUT; - lp->flags &= ~ISDN_NET_CALLBACK; - break; - } - lp->flags &= ~ISDN_NET_DIALMODE_MASK; /* first all bits off */ - if (cfg->dialmode && !(cfg->dialmode & ISDN_NET_DIALMODE_MASK)) { - /* old isdnctrl version, where only 0 or 1 is given */ - printk(KERN_WARNING - "Old isdnctrl version detected! Please update.\n"); - lp->flags |= ISDN_NET_DM_OFF; /* turn on `off' bit */ - } - else { - lp->flags |= cfg->dialmode; /* turn on selected bits */ - } - if (cfg->chargehup) - lp->hupflags |= ISDN_CHARGEHUP; - else - lp->hupflags &= ~ISDN_CHARGEHUP; - if (cfg->ihup) - lp->hupflags |= ISDN_INHUP; - else - lp->hupflags &= ~ISDN_INHUP; - if (cfg->chargeint > 10) { - lp->hupflags |= ISDN_CHARGEHUP | ISDN_HAVECHARGE | ISDN_MANCHARGE; - lp->chargeint = cfg->chargeint * HZ; - } - if (cfg->p_encap != lp->p_encap) { - if (cfg->p_encap == ISDN_NET_ENCAP_RAWIP) { - p->dev->header_ops = NULL; - p->dev->flags = IFF_NOARP | IFF_POINTOPOINT; - } else { - p->dev->header_ops = &isdn_header_ops; - if (cfg->p_encap == ISDN_NET_ENCAP_ETHER) - p->dev->flags = IFF_BROADCAST | IFF_MULTICAST; - else - p->dev->flags = IFF_NOARP | IFF_POINTOPOINT; - } - } - lp->p_encap = cfg->p_encap; - return 0; - } - return -ENODEV; -} - -/* - * Perform get-interface-parameters.ioctl - */ -int -isdn_net_getcfg(isdn_net_ioctl_cfg *cfg) -{ - isdn_net_dev *p = isdn_net_findif(cfg->name); - - if (p) { - isdn_net_local *lp = p->local; - - strcpy(cfg->eaz, lp->msn); - cfg->exclusive = lp->exclusive; - if (lp->pre_device >= 0) { - sprintf(cfg->drvid, "%s,%d", dev->drvid[lp->pre_device], - lp->pre_channel); - } else - cfg->drvid[0] = '\0'; - cfg->onhtime = lp->onhtime; - cfg->charge = lp->charge; - cfg->l2_proto = lp->l2_proto; - cfg->l3_proto = lp->l3_proto; - cfg->p_encap = lp->p_encap; - cfg->secure = (lp->flags & ISDN_NET_SECURE) ? 1 : 0; - cfg->callback = 0; - if (lp->flags & ISDN_NET_CALLBACK) - cfg->callback = 1; - if (lp->flags & ISDN_NET_CBOUT) - cfg->callback = 2; - cfg->cbhup = (lp->flags & ISDN_NET_CBHUP) ? 1 : 0; - cfg->dialmode = lp->flags & ISDN_NET_DIALMODE_MASK; - cfg->chargehup = (lp->hupflags & ISDN_CHARGEHUP) ? 1 : 0; - cfg->ihup = (lp->hupflags & ISDN_INHUP) ? 1 : 0; - cfg->cbdelay = lp->cbdelay; - cfg->dialmax = lp->dialmax; - cfg->triggercps = lp->triggercps; - cfg->slavedelay = lp->slavedelay / HZ; - cfg->chargeint = (lp->hupflags & ISDN_CHARGEHUP) ? - (lp->chargeint / HZ) : 0; - cfg->pppbind = lp->pppbind; - cfg->dialtimeout = lp->dialtimeout >= 0 ? lp->dialtimeout / HZ : -1; - cfg->dialwait = lp->dialwait / HZ; - if (lp->slave) { - if (strlen(lp->slave->name) >= 10) - strcpy(cfg->slave, "too-long"); - else - strcpy(cfg->slave, lp->slave->name); - } else - cfg->slave[0] = '\0'; - if (lp->master) { - if (strlen(lp->master->name) >= 10) - strcpy(cfg->master, "too-long"); - else - strcpy(cfg->master, lp->master->name); - } else - cfg->master[0] = '\0'; - return 0; - } - return -ENODEV; -} - -/* - * Add a phone-number to an interface. - */ -int -isdn_net_addphone(isdn_net_ioctl_phone *phone) -{ - isdn_net_dev *p = isdn_net_findif(phone->name); - isdn_net_phone *n; - - if (p) { - if (!(n = kmalloc(sizeof(isdn_net_phone), GFP_KERNEL))) - return -ENOMEM; - strlcpy(n->num, phone->phone, sizeof(n->num)); - n->next = p->local->phone[phone->outgoing & 1]; - p->local->phone[phone->outgoing & 1] = n; - return 0; - } - return -ENODEV; -} - -/* - * Copy a string of all phone-numbers of an interface to user space. - * This might sleep and must be called with the isdn semaphore down. - */ -int -isdn_net_getphones(isdn_net_ioctl_phone *phone, char __user *phones) -{ - isdn_net_dev *p = isdn_net_findif(phone->name); - int inout = phone->outgoing & 1; - int more = 0; - int count = 0; - isdn_net_phone *n; - - if (!p) - return -ENODEV; - inout &= 1; - for (n = p->local->phone[inout]; n; n = n->next) { - if (more) { - put_user(' ', phones++); - count++; - } - if (copy_to_user(phones, n->num, strlen(n->num) + 1)) { - return -EFAULT; - } - phones += strlen(n->num); - count += strlen(n->num); - more = 1; - } - put_user(0, phones); - count++; - return count; -} - -/* - * Copy a string containing the peer's phone number of a connected interface - * to user space. - */ -int -isdn_net_getpeer(isdn_net_ioctl_phone *phone, isdn_net_ioctl_phone __user *peer) -{ - isdn_net_dev *p = isdn_net_findif(phone->name); - int ch, dv, idx; - - if (!p) - return -ENODEV; - /* - * Theoretical race: while this executes, the remote number might - * become invalid (hang up) or change (new connection), resulting - * in (partially) wrong number copied to user. This race - * currently ignored. - */ - ch = p->local->isdn_channel; - dv = p->local->isdn_device; - if (ch < 0 && dv < 0) - return -ENOTCONN; - idx = isdn_dc2minor(dv, ch); - if (idx < 0) - return -ENODEV; - /* for pre-bound channels, we need this extra check */ - if (strncmp(dev->num[idx], "???", 3) == 0) - return -ENOTCONN; - strncpy(phone->phone, dev->num[idx], ISDN_MSNLEN); - phone->outgoing = USG_OUTGOING(dev->usage[idx]); - if (copy_to_user(peer, phone, sizeof(*peer))) - return -EFAULT; - return 0; -} -/* - * Delete a phone-number from an interface. - */ -int -isdn_net_delphone(isdn_net_ioctl_phone *phone) -{ - isdn_net_dev *p = isdn_net_findif(phone->name); - int inout = phone->outgoing & 1; - isdn_net_phone *n; - isdn_net_phone *m; - - if (p) { - n = p->local->phone[inout]; - m = NULL; - while (n) { - if (!strcmp(n->num, phone->phone)) { - if (p->local->dial == n) - p->local->dial = n->next; - if (m) - m->next = n->next; - else - p->local->phone[inout] = n->next; - kfree(n); - return 0; - } - m = n; - n = (isdn_net_phone *) n->next; - } - return -EINVAL; - } - return -ENODEV; -} - -/* - * Delete all phone-numbers of an interface. - */ -static int -isdn_net_rmallphone(isdn_net_dev *p) -{ - isdn_net_phone *n; - isdn_net_phone *m; - int i; - - for (i = 0; i < 2; i++) { - n = p->local->phone[i]; - while (n) { - m = n->next; - kfree(n); - n = m; - } - p->local->phone[i] = NULL; - } - p->local->dial = NULL; - return 0; -} - -/* - * Force a hangup of a network-interface. - */ -int -isdn_net_force_hangup(char *name) -{ - isdn_net_dev *p = isdn_net_findif(name); - struct net_device *q; - - if (p) { - if (p->local->isdn_device < 0) - return 1; - q = p->local->slave; - /* If this interface has slaves, do a hangup for them also. */ - while (q) { - isdn_net_hangup(q); - q = MASTER_TO_SLAVE(q); - } - isdn_net_hangup(p->dev); - return 0; - } - return -ENODEV; -} - -/* - * Helper-function for isdn_net_rm: Do the real work. - */ -static int -isdn_net_realrm(isdn_net_dev *p, isdn_net_dev *q) -{ - u_long flags; - - if (isdn_net_device_started(p)) { - return -EBUSY; - } -#ifdef CONFIG_ISDN_X25 - if (p->cprot && p->cprot->pops) - p->cprot->pops->proto_del(p->cprot); -#endif - /* Free all phone-entries */ - isdn_net_rmallphone(p); - /* If interface is bound exclusive, free channel-usage */ - if (p->local->exclusive != -1) - isdn_unexclusive_channel(p->local->pre_device, p->local->pre_channel); - if (p->local->master) { - /* It's a slave-device, so update master's slave-pointer if necessary */ - if (((isdn_net_local *) ISDN_MASTER_PRIV(p->local))->slave == - p->dev) - ((isdn_net_local *)ISDN_MASTER_PRIV(p->local))->slave = - p->local->slave; - } else { - /* Unregister only if it's a master-device */ - unregister_netdev(p->dev); - } - /* Unlink device from chain */ - spin_lock_irqsave(&dev->lock, flags); - if (q) - q->next = p->next; - else - dev->netdev = p->next; - if (p->local->slave) { - /* If this interface has a slave, remove it also */ - char *slavename = p->local->slave->name; - isdn_net_dev *n = dev->netdev; - q = NULL; - while (n) { - if (!strcmp(n->dev->name, slavename)) { - spin_unlock_irqrestore(&dev->lock, flags); - isdn_net_realrm(n, q); - spin_lock_irqsave(&dev->lock, flags); - break; - } - q = n; - n = (isdn_net_dev *)n->next; - } - } - spin_unlock_irqrestore(&dev->lock, flags); - /* If no more net-devices remain, disable auto-hangup timer */ - if (dev->netdev == NULL) - isdn_timer_ctrl(ISDN_TIMER_NETHANGUP, 0); - free_netdev(p->dev); - kfree(p); - - return 0; -} - -/* - * Remove a single network-interface. - */ -int -isdn_net_rm(char *name) -{ - u_long flags; - isdn_net_dev *p; - isdn_net_dev *q; - - /* Search name in netdev-chain */ - spin_lock_irqsave(&dev->lock, flags); - p = dev->netdev; - q = NULL; - while (p) { - if (!strcmp(p->dev->name, name)) { - spin_unlock_irqrestore(&dev->lock, flags); - return (isdn_net_realrm(p, q)); - } - q = p; - p = (isdn_net_dev *) p->next; - } - spin_unlock_irqrestore(&dev->lock, flags); - /* If no more net-devices remain, disable auto-hangup timer */ - if (dev->netdev == NULL) - isdn_timer_ctrl(ISDN_TIMER_NETHANGUP, 0); - return -ENODEV; -} - -/* - * Remove all network-interfaces - */ -int -isdn_net_rmall(void) -{ - u_long flags; - int ret; - - /* Walk through netdev-chain */ - spin_lock_irqsave(&dev->lock, flags); - while (dev->netdev) { - if (!dev->netdev->local->master) { - /* Remove master-devices only, slaves get removed with their master */ - spin_unlock_irqrestore(&dev->lock, flags); - if ((ret = isdn_net_realrm(dev->netdev, NULL))) { - return ret; - } - spin_lock_irqsave(&dev->lock, flags); - } - } - dev->netdev = NULL; - spin_unlock_irqrestore(&dev->lock, flags); - return 0; -} diff --git a/drivers/isdn/i4l/isdn_net.h b/drivers/isdn/i4l/isdn_net.h deleted file mode 100644 index cca6d68da171..000000000000 --- a/drivers/isdn/i4l/isdn_net.h +++ /dev/null @@ -1,151 +0,0 @@ -/* $Id: isdn_net.h,v 1.1.2.2 2004/01/12 22:37:19 keil Exp $ - * - * header for Linux ISDN subsystem, network related functions (linklevel). - * - * Copyright 1994-1999 by Fritz Elfert (fritz@isdn4linux.de) - * Copyright 1995,96 by Thinking Objects Software GmbH Wuerzburg - * Copyright 1995,96 by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -/* Definitions for hupflags: */ -#define ISDN_WAITCHARGE 1 /* did not get a charge info yet */ -#define ISDN_HAVECHARGE 2 /* We know a charge info */ -#define ISDN_CHARGEHUP 4 /* We want to use the charge mechanism */ -#define ISDN_INHUP 8 /* Even if incoming, close after huptimeout */ -#define ISDN_MANCHARGE 16 /* Charge Interval manually set */ - -/* - * Definitions for Cisco-HDLC header. - */ - -#define CISCO_ADDR_UNICAST 0x0f -#define CISCO_ADDR_BROADCAST 0x8f -#define CISCO_CTRL 0x00 -#define CISCO_TYPE_CDP 0x2000 -#define CISCO_TYPE_SLARP 0x8035 -#define CISCO_SLARP_REQUEST 0 -#define CISCO_SLARP_REPLY 1 -#define CISCO_SLARP_KEEPALIVE 2 - -extern char *isdn_net_new(char *, struct net_device *); -extern char *isdn_net_newslave(char *); -extern int isdn_net_rm(char *); -extern int isdn_net_rmall(void); -extern int isdn_net_stat_callback(int, isdn_ctrl *); -extern int isdn_net_setcfg(isdn_net_ioctl_cfg *); -extern int isdn_net_getcfg(isdn_net_ioctl_cfg *); -extern int isdn_net_addphone(isdn_net_ioctl_phone *); -extern int isdn_net_getphones(isdn_net_ioctl_phone *, char __user *); -extern int isdn_net_getpeer(isdn_net_ioctl_phone *, isdn_net_ioctl_phone __user *); -extern int isdn_net_delphone(isdn_net_ioctl_phone *); -extern int isdn_net_find_icall(int, int, int, setup_parm *); -extern void isdn_net_hangup(struct net_device *); -extern void isdn_net_dial(void); -extern void isdn_net_autohup(void); -extern int isdn_net_force_hangup(char *); -extern int isdn_net_force_dial(char *); -extern isdn_net_dev *isdn_net_findif(char *); -extern int isdn_net_rcv_skb(int, struct sk_buff *); -extern int isdn_net_dial_req(isdn_net_local *); -extern void isdn_net_writebuf_skb(isdn_net_local *lp, struct sk_buff *skb); -extern void isdn_net_write_super(isdn_net_local *lp, struct sk_buff *skb); - -#define ISDN_NET_MAX_QUEUE_LENGTH 2 - -#define ISDN_MASTER_PRIV(lp) ((isdn_net_local *) netdev_priv(lp->master)) -#define ISDN_SLAVE_PRIV(lp) ((isdn_net_local *) netdev_priv(lp->slave)) -#define MASTER_TO_SLAVE(master) \ - (((isdn_net_local *) netdev_priv(master))->slave) - -/* - * is this particular channel busy? - */ -static __inline__ int isdn_net_lp_busy(isdn_net_local *lp) -{ - if (atomic_read(&lp->frame_cnt) < ISDN_NET_MAX_QUEUE_LENGTH) - return 0; - else - return 1; -} - -/* - * For the given net device, this will get a non-busy channel out of the - * corresponding bundle. The returned channel is locked. - */ -static __inline__ isdn_net_local *isdn_net_get_locked_lp(isdn_net_dev *nd) -{ - unsigned long flags; - isdn_net_local *lp; - - spin_lock_irqsave(&nd->queue_lock, flags); - lp = nd->queue; /* get lp on top of queue */ - while (isdn_net_lp_busy(nd->queue)) { - nd->queue = nd->queue->next; - if (nd->queue == lp) { /* not found -- should never happen */ - lp = NULL; - goto errout; - } - } - lp = nd->queue; - nd->queue = nd->queue->next; - spin_unlock_irqrestore(&nd->queue_lock, flags); - spin_lock(&lp->xmit_lock); - local_bh_disable(); - return lp; -errout: - spin_unlock_irqrestore(&nd->queue_lock, flags); - return lp; -} - -/* - * add a channel to a bundle - */ -static __inline__ void isdn_net_add_to_bundle(isdn_net_dev *nd, isdn_net_local *nlp) -{ - isdn_net_local *lp; - unsigned long flags; - - spin_lock_irqsave(&nd->queue_lock, flags); - - lp = nd->queue; -// printk(KERN_DEBUG "%s: lp:%s(%p) nlp:%s(%p) last(%p)\n", -// __func__, lp->name, lp, nlp->name, nlp, lp->last); - nlp->last = lp->last; - lp->last->next = nlp; - lp->last = nlp; - nlp->next = lp; - nd->queue = nlp; - - spin_unlock_irqrestore(&nd->queue_lock, flags); -} -/* - * remove a channel from the bundle it belongs to - */ -static __inline__ void isdn_net_rm_from_bundle(isdn_net_local *lp) -{ - isdn_net_local *master_lp = lp; - unsigned long flags; - - if (lp->master) - master_lp = ISDN_MASTER_PRIV(lp); - -// printk(KERN_DEBUG "%s: lp:%s(%p) mlp:%s(%p) last(%p) next(%p) mndq(%p)\n", -// __func__, lp->name, lp, master_lp->name, master_lp, lp->last, lp->next, master_lp->netdev->queue); - spin_lock_irqsave(&master_lp->netdev->queue_lock, flags); - lp->last->next = lp->next; - lp->next->last = lp->last; - if (master_lp->netdev->queue == lp) { - master_lp->netdev->queue = lp->next; - if (lp->next == lp) { /* last in queue */ - master_lp->netdev->queue = master_lp->netdev->local; - } - } - lp->next = lp->last = lp; /* (re)set own pointers */ -// printk(KERN_DEBUG "%s: mndq(%p)\n", -// __func__, master_lp->netdev->queue); - spin_unlock_irqrestore(&master_lp->netdev->queue_lock, flags); -} diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c deleted file mode 100644 index 7e0f419c14f8..000000000000 --- a/drivers/isdn/i4l/isdn_ppp.c +++ /dev/null @@ -1,3046 +0,0 @@ -/* $Id: isdn_ppp.c,v 1.1.2.3 2004/02/10 01:07:13 keil Exp $ - * - * Linux ISDN subsystem, functions for synchronous PPP (linklevel). - * - * Copyright 1995,96 by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#include -#include -#include -#include -#ifdef CONFIG_IPPP_FILTER -#include -#endif - -#include "isdn_common.h" -#include "isdn_ppp.h" -#include "isdn_net.h" - -#ifndef PPP_IPX -#define PPP_IPX 0x002b -#endif - -/* Prototypes */ -static int isdn_ppp_fill_rq(unsigned char *buf, int len, int proto, int slot); -static int isdn_ppp_closewait(int slot); -static void isdn_ppp_push_higher(isdn_net_dev *net_dev, isdn_net_local *lp, - struct sk_buff *skb, int proto); -static int isdn_ppp_if_get_unit(char *namebuf); -static int isdn_ppp_set_compressor(struct ippp_struct *is, struct isdn_ppp_comp_data *); -static struct sk_buff *isdn_ppp_decompress(struct sk_buff *, - struct ippp_struct *, struct ippp_struct *, int *proto); -static void isdn_ppp_receive_ccp(isdn_net_dev *net_dev, isdn_net_local *lp, - struct sk_buff *skb, int proto); -static struct sk_buff *isdn_ppp_compress(struct sk_buff *skb_in, int *proto, - struct ippp_struct *is, struct ippp_struct *master, int type); -static void isdn_ppp_send_ccp(isdn_net_dev *net_dev, isdn_net_local *lp, - struct sk_buff *skb); - -/* New CCP stuff */ -static void isdn_ppp_ccp_kickup(struct ippp_struct *is); -static void isdn_ppp_ccp_xmit_reset(struct ippp_struct *is, int proto, - unsigned char code, unsigned char id, - unsigned char *data, int len); -static struct ippp_ccp_reset *isdn_ppp_ccp_reset_alloc(struct ippp_struct *is); -static void isdn_ppp_ccp_reset_free(struct ippp_struct *is); -static void isdn_ppp_ccp_reset_free_state(struct ippp_struct *is, - unsigned char id); -static void isdn_ppp_ccp_timer_callback(struct timer_list *t); -static struct ippp_ccp_reset_state *isdn_ppp_ccp_reset_alloc_state(struct ippp_struct *is, - unsigned char id); -static void isdn_ppp_ccp_reset_trans(struct ippp_struct *is, - struct isdn_ppp_resetparams *rp); -static void isdn_ppp_ccp_reset_ack_rcvd(struct ippp_struct *is, - unsigned char id); - - - -#ifdef CONFIG_ISDN_MPP -static ippp_bundle *isdn_ppp_bundle_arr = NULL; - -static int isdn_ppp_mp_bundle_array_init(void); -static int isdn_ppp_mp_init(isdn_net_local *lp, ippp_bundle *add_to); -static void isdn_ppp_mp_receive(isdn_net_dev *net_dev, isdn_net_local *lp, - struct sk_buff *skb); -static void isdn_ppp_mp_cleanup(isdn_net_local *lp); - -static int isdn_ppp_bundle(struct ippp_struct *, int unit); -#endif /* CONFIG_ISDN_MPP */ - -char *isdn_ppp_revision = "$Revision: 1.1.2.3 $"; - -static struct ippp_struct *ippp_table[ISDN_MAX_CHANNELS]; - -static struct isdn_ppp_compressor *ipc_head = NULL; - -/* - * frame log (debug) - */ -static void -isdn_ppp_frame_log(char *info, char *data, int len, int maxlen, int unit, int slot) -{ - int cnt, - j, - i; - char buf[80]; - - if (len < maxlen) - maxlen = len; - - for (i = 0, cnt = 0; cnt < maxlen; i++) { - for (j = 0; j < 16 && cnt < maxlen; j++, cnt++) - sprintf(buf + j * 3, "%02x ", (unsigned char)data[cnt]); - printk(KERN_DEBUG "[%d/%d].%s[%d]: %s\n", unit, slot, info, i, buf); - } -} - -/* - * unbind isdn_net_local <=> ippp-device - * note: it can happen, that we hangup/free the master before the slaves - * in this case we bind another lp to the master device - */ -int -isdn_ppp_free(isdn_net_local *lp) -{ - struct ippp_struct *is; - - if (lp->ppp_slot < 0 || lp->ppp_slot >= ISDN_MAX_CHANNELS) { - printk(KERN_ERR "%s: ppp_slot(%d) out of range\n", - __func__, lp->ppp_slot); - return 0; - } - -#ifdef CONFIG_ISDN_MPP - spin_lock(&lp->netdev->pb->lock); -#endif - isdn_net_rm_from_bundle(lp); -#ifdef CONFIG_ISDN_MPP - if (lp->netdev->pb->ref_ct == 1) /* last link in queue? */ - isdn_ppp_mp_cleanup(lp); - - lp->netdev->pb->ref_ct--; - spin_unlock(&lp->netdev->pb->lock); -#endif /* CONFIG_ISDN_MPP */ - if (lp->ppp_slot < 0 || lp->ppp_slot >= ISDN_MAX_CHANNELS) { - printk(KERN_ERR "%s: ppp_slot(%d) now invalid\n", - __func__, lp->ppp_slot); - return 0; - } - is = ippp_table[lp->ppp_slot]; - if ((is->state & IPPP_CONNECT)) - isdn_ppp_closewait(lp->ppp_slot); /* force wakeup on ippp device */ - else if (is->state & IPPP_ASSIGNED) - is->state = IPPP_OPEN; /* fallback to 'OPEN but not ASSIGNED' state */ - - if (is->debug & 0x1) - printk(KERN_DEBUG "isdn_ppp_free %d %lx %lx\n", lp->ppp_slot, (long) lp, (long) is->lp); - - is->lp = NULL; /* link is down .. set lp to NULL */ - lp->ppp_slot = -1; /* is this OK ?? */ - - return 0; -} - -/* - * bind isdn_net_local <=> ippp-device - * - * This function is allways called with holding dev->lock so - * no additional lock is needed - */ -int -isdn_ppp_bind(isdn_net_local *lp) -{ - int i; - int unit = 0; - struct ippp_struct *is; - int retval; - - if (lp->pppbind < 0) { /* device bounded to ippp device ? */ - isdn_net_dev *net_dev = dev->netdev; - char exclusive[ISDN_MAX_CHANNELS]; /* exclusive flags */ - memset(exclusive, 0, ISDN_MAX_CHANNELS); - while (net_dev) { /* step through net devices to find exclusive minors */ - isdn_net_local *lp = net_dev->local; - if (lp->pppbind >= 0) - exclusive[lp->pppbind] = 1; - net_dev = net_dev->next; - } - /* - * search a free device / slot - */ - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - if (ippp_table[i]->state == IPPP_OPEN && !exclusive[ippp_table[i]->minor]) { /* OPEN, but not connected! */ - break; - } - } - } else { - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - if (ippp_table[i]->minor == lp->pppbind && - (ippp_table[i]->state & IPPP_OPEN) == IPPP_OPEN) - break; - } - } - - if (i >= ISDN_MAX_CHANNELS) { - printk(KERN_WARNING "isdn_ppp_bind: Can't find a (free) connection to the ipppd daemon.\n"); - retval = -1; - goto out; - } - /* get unit number from interface name .. ugly! */ - unit = isdn_ppp_if_get_unit(lp->netdev->dev->name); - if (unit < 0) { - printk(KERN_ERR "isdn_ppp_bind: illegal interface name %s.\n", - lp->netdev->dev->name); - retval = -1; - goto out; - } - - lp->ppp_slot = i; - is = ippp_table[i]; - is->lp = lp; - is->unit = unit; - is->state = IPPP_OPEN | IPPP_ASSIGNED; /* assigned to a netdevice but not connected */ -#ifdef CONFIG_ISDN_MPP - retval = isdn_ppp_mp_init(lp, NULL); - if (retval < 0) - goto out; -#endif /* CONFIG_ISDN_MPP */ - - retval = lp->ppp_slot; - -out: - return retval; -} - -/* - * kick the ipppd on the device - * (wakes up daemon after B-channel connect) - */ - -void -isdn_ppp_wakeup_daemon(isdn_net_local *lp) -{ - if (lp->ppp_slot < 0 || lp->ppp_slot >= ISDN_MAX_CHANNELS) { - printk(KERN_ERR "%s: ppp_slot(%d) out of range\n", - __func__, lp->ppp_slot); - return; - } - ippp_table[lp->ppp_slot]->state = IPPP_OPEN | IPPP_CONNECT | IPPP_NOBLOCK; - wake_up_interruptible(&ippp_table[lp->ppp_slot]->wq); -} - -/* - * there was a hangup on the netdevice - * force wakeup of the ippp device - * go into 'device waits for release' state - */ -static int -isdn_ppp_closewait(int slot) -{ - struct ippp_struct *is; - - if (slot < 0 || slot >= ISDN_MAX_CHANNELS) { - printk(KERN_ERR "%s: slot(%d) out of range\n", - __func__, slot); - return 0; - } - is = ippp_table[slot]; - if (is->state) - wake_up_interruptible(&is->wq); - is->state = IPPP_CLOSEWAIT; - return 1; -} - -/* - * isdn_ppp_find_slot / isdn_ppp_free_slot - */ - -static int -isdn_ppp_get_slot(void) -{ - int i; - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - if (!ippp_table[i]->state) - return i; - } - return -1; -} - -/* - * isdn_ppp_open - */ - -int -isdn_ppp_open(int min, struct file *file) -{ - int slot; - struct ippp_struct *is; - - if (min < 0 || min >= ISDN_MAX_CHANNELS) - return -ENODEV; - - slot = isdn_ppp_get_slot(); - if (slot < 0) { - return -EBUSY; - } - is = file->private_data = ippp_table[slot]; - - printk(KERN_DEBUG "ippp, open, slot: %d, minor: %d, state: %04x\n", - slot, min, is->state); - - /* compression stuff */ - is->link_compressor = is->compressor = NULL; - is->link_decompressor = is->decompressor = NULL; - is->link_comp_stat = is->comp_stat = NULL; - is->link_decomp_stat = is->decomp_stat = NULL; - is->compflags = 0; - - is->reset = isdn_ppp_ccp_reset_alloc(is); - if (!is->reset) - return -ENOMEM; - - is->lp = NULL; - is->mp_seqno = 0; /* MP sequence number */ - is->pppcfg = 0; /* ppp configuration */ - is->mpppcfg = 0; /* mppp configuration */ - is->last_link_seqno = -1; /* MP: maybe set to Bundle-MIN, when joining a bundle ?? */ - is->unit = -1; /* set, when we have our interface */ - is->mru = 1524; /* MRU, default 1524 */ - is->maxcid = 16; /* VJ: maxcid */ - is->tk = current; - init_waitqueue_head(&is->wq); - is->first = is->rq + NUM_RCV_BUFFS - 1; /* receive queue */ - is->last = is->rq; - is->minor = min; -#ifdef CONFIG_ISDN_PPP_VJ - /* - * VJ header compression init - */ - is->slcomp = slhc_init(16, 16); /* not necessary for 2. link in bundle */ - if (IS_ERR(is->slcomp)) { - isdn_ppp_ccp_reset_free(is); - return PTR_ERR(is->slcomp); - } -#endif -#ifdef CONFIG_IPPP_FILTER - is->pass_filter = NULL; - is->active_filter = NULL; -#endif - is->state = IPPP_OPEN; - - return 0; -} - -/* - * release ippp device - */ -void -isdn_ppp_release(int min, struct file *file) -{ - int i; - struct ippp_struct *is; - - if (min < 0 || min >= ISDN_MAX_CHANNELS) - return; - is = file->private_data; - - if (!is) { - printk(KERN_ERR "%s: no file->private_data\n", __func__); - return; - } - if (is->debug & 0x1) - printk(KERN_DEBUG "ippp: release, minor: %d %lx\n", min, (long) is->lp); - - if (is->lp) { /* a lp address says: this link is still up */ - isdn_net_dev *p = is->lp->netdev; - - if (!p) { - printk(KERN_ERR "%s: no lp->netdev\n", __func__); - return; - } - is->state &= ~IPPP_CONNECT; /* -> effect: no call of wakeup */ - /* - * isdn_net_hangup() calls isdn_ppp_free() - * isdn_ppp_free() sets is->lp to NULL and lp->ppp_slot to -1 - * removing the IPPP_CONNECT flag omits calling of isdn_ppp_wakeup_daemon() - */ - isdn_net_hangup(p->dev); - } - for (i = 0; i < NUM_RCV_BUFFS; i++) { - kfree(is->rq[i].buf); - is->rq[i].buf = NULL; - } - is->first = is->rq + NUM_RCV_BUFFS - 1; /* receive queue */ - is->last = is->rq; - -#ifdef CONFIG_ISDN_PPP_VJ -/* TODO: if this was the previous master: link the slcomp to the new master */ - slhc_free(is->slcomp); - is->slcomp = NULL; -#endif -#ifdef CONFIG_IPPP_FILTER - if (is->pass_filter) { - bpf_prog_destroy(is->pass_filter); - is->pass_filter = NULL; - } - - if (is->active_filter) { - bpf_prog_destroy(is->active_filter); - is->active_filter = NULL; - } -#endif - -/* TODO: if this was the previous master: link the stuff to the new master */ - if (is->comp_stat) - is->compressor->free(is->comp_stat); - if (is->link_comp_stat) - is->link_compressor->free(is->link_comp_stat); - if (is->link_decomp_stat) - is->link_decompressor->free(is->link_decomp_stat); - if (is->decomp_stat) - is->decompressor->free(is->decomp_stat); - is->compressor = is->link_compressor = NULL; - is->decompressor = is->link_decompressor = NULL; - is->comp_stat = is->link_comp_stat = NULL; - is->decomp_stat = is->link_decomp_stat = NULL; - - /* Clean up if necessary */ - if (is->reset) - isdn_ppp_ccp_reset_free(is); - - /* this slot is ready for new connections */ - is->state = 0; -} - -/* - * get_arg .. ioctl helper - */ -static int -get_arg(void __user *b, void *val, int len) -{ - if (len <= 0) - len = sizeof(void *); - if (copy_from_user(val, b, len)) - return -EFAULT; - return 0; -} - -/* - * set arg .. ioctl helper - */ -static int -set_arg(void __user *b, void *val, int len) -{ - if (len <= 0) - len = sizeof(void *); - if (copy_to_user(b, val, len)) - return -EFAULT; - return 0; -} - -#ifdef CONFIG_IPPP_FILTER -static int get_filter(void __user *arg, struct sock_filter **p) -{ - struct sock_fprog uprog; - struct sock_filter *code = NULL; - int len; - - if (copy_from_user(&uprog, arg, sizeof(uprog))) - return -EFAULT; - - if (!uprog.len) { - *p = NULL; - return 0; - } - - /* uprog.len is unsigned short, so no overflow here */ - len = uprog.len * sizeof(struct sock_filter); - code = memdup_user(uprog.filter, len); - if (IS_ERR(code)) - return PTR_ERR(code); - - *p = code; - return uprog.len; -} -#endif /* CONFIG_IPPP_FILTER */ - -/* - * ippp device ioctl - */ -int -isdn_ppp_ioctl(int min, struct file *file, unsigned int cmd, unsigned long arg) -{ - unsigned long val; - int r, i, j; - struct ippp_struct *is; - isdn_net_local *lp; - struct isdn_ppp_comp_data data; - void __user *argp = (void __user *)arg; - - is = file->private_data; - lp = is->lp; - - if (is->debug & 0x1) - printk(KERN_DEBUG "isdn_ppp_ioctl: minor: %d cmd: %x state: %x\n", min, cmd, is->state); - - if (!(is->state & IPPP_OPEN)) - return -EINVAL; - - switch (cmd) { - case PPPIOCBUNDLE: -#ifdef CONFIG_ISDN_MPP - if (!(is->state & IPPP_CONNECT)) - return -EINVAL; - if ((r = get_arg(argp, &val, sizeof(val)))) - return r; - printk(KERN_DEBUG "iPPP-bundle: minor: %d, slave unit: %d, master unit: %d\n", - (int) min, (int) is->unit, (int) val); - return isdn_ppp_bundle(is, val); -#else - return -1; -#endif - break; - case PPPIOCGUNIT: /* get ppp/isdn unit number */ - if ((r = set_arg(argp, &is->unit, sizeof(is->unit)))) - return r; - break; - case PPPIOCGIFNAME: - if (!lp) - return -EINVAL; - if ((r = set_arg(argp, lp->netdev->dev->name, - strlen(lp->netdev->dev->name)))) - return r; - break; - case PPPIOCGMPFLAGS: /* get configuration flags */ - if ((r = set_arg(argp, &is->mpppcfg, sizeof(is->mpppcfg)))) - return r; - break; - case PPPIOCSMPFLAGS: /* set configuration flags */ - if ((r = get_arg(argp, &val, sizeof(val)))) - return r; - is->mpppcfg = val; - break; - case PPPIOCGFLAGS: /* get configuration flags */ - if ((r = set_arg(argp, &is->pppcfg, sizeof(is->pppcfg)))) - return r; - break; - case PPPIOCSFLAGS: /* set configuration flags */ - if ((r = get_arg(argp, &val, sizeof(val)))) { - return r; - } - if (val & SC_ENABLE_IP && !(is->pppcfg & SC_ENABLE_IP) && (is->state & IPPP_CONNECT)) { - if (lp) { - /* OK .. we are ready to send buffers */ - is->pppcfg = val; /* isdn_ppp_xmit test for SC_ENABLE_IP !!! */ - netif_wake_queue(lp->netdev->dev); - break; - } - } - is->pppcfg = val; - break; - case PPPIOCGIDLE: /* get idle time information */ - if (lp) { - struct ppp_idle pidle; - pidle.xmit_idle = pidle.recv_idle = lp->huptimer; - if ((r = set_arg(argp, &pidle, sizeof(struct ppp_idle)))) - return r; - } - break; - case PPPIOCSMRU: /* set receive unit size for PPP */ - if ((r = get_arg(argp, &val, sizeof(val)))) - return r; - is->mru = val; - break; - case PPPIOCSMPMRU: - break; - case PPPIOCSMPMTU: - break; - case PPPIOCSMAXCID: /* set the maximum compression slot id */ - if ((r = get_arg(argp, &val, sizeof(val)))) - return r; - val++; - if (is->maxcid != val) { -#ifdef CONFIG_ISDN_PPP_VJ - struct slcompress *sltmp; -#endif - if (is->debug & 0x1) - printk(KERN_DEBUG "ippp, ioctl: changed MAXCID to %ld\n", val); - is->maxcid = val; -#ifdef CONFIG_ISDN_PPP_VJ - sltmp = slhc_init(16, val); - if (IS_ERR(sltmp)) - return PTR_ERR(sltmp); - if (is->slcomp) - slhc_free(is->slcomp); - is->slcomp = sltmp; -#endif - } - break; - case PPPIOCGDEBUG: - if ((r = set_arg(argp, &is->debug, sizeof(is->debug)))) - return r; - break; - case PPPIOCSDEBUG: - if ((r = get_arg(argp, &val, sizeof(val)))) - return r; - is->debug = val; - break; - case PPPIOCGCOMPRESSORS: - { - unsigned long protos[8] = {0,}; - struct isdn_ppp_compressor *ipc = ipc_head; - while (ipc) { - j = ipc->num / (sizeof(long) * 8); - i = ipc->num % (sizeof(long) * 8); - if (j < 8) - protos[j] |= (1UL << i); - ipc = ipc->next; - } - if ((r = set_arg(argp, protos, 8 * sizeof(long)))) - return r; - } - break; - case PPPIOCSCOMPRESSOR: - if ((r = get_arg(argp, &data, sizeof(struct isdn_ppp_comp_data)))) - return r; - return isdn_ppp_set_compressor(is, &data); - case PPPIOCGCALLINFO: - { - struct pppcallinfo pci; - memset((char *)&pci, 0, sizeof(struct pppcallinfo)); - if (lp) - { - strncpy(pci.local_num, lp->msn, 63); - if (lp->dial) { - strncpy(pci.remote_num, lp->dial->num, 63); - } - pci.charge_units = lp->charge; - if (lp->outgoing) - pci.calltype = CALLTYPE_OUTGOING; - else - pci.calltype = CALLTYPE_INCOMING; - if (lp->flags & ISDN_NET_CALLBACK) - pci.calltype |= CALLTYPE_CALLBACK; - } - return set_arg(argp, &pci, sizeof(struct pppcallinfo)); - } -#ifdef CONFIG_IPPP_FILTER - case PPPIOCSPASS: - { - struct sock_fprog_kern fprog; - struct sock_filter *code; - int err, len = get_filter(argp, &code); - - if (len < 0) - return len; - - fprog.len = len; - fprog.filter = code; - - if (is->pass_filter) { - bpf_prog_destroy(is->pass_filter); - is->pass_filter = NULL; - } - if (fprog.filter != NULL) - err = bpf_prog_create(&is->pass_filter, &fprog); - else - err = 0; - kfree(code); - - return err; - } - case PPPIOCSACTIVE: - { - struct sock_fprog_kern fprog; - struct sock_filter *code; - int err, len = get_filter(argp, &code); - - if (len < 0) - return len; - - fprog.len = len; - fprog.filter = code; - - if (is->active_filter) { - bpf_prog_destroy(is->active_filter); - is->active_filter = NULL; - } - if (fprog.filter != NULL) - err = bpf_prog_create(&is->active_filter, &fprog); - else - err = 0; - kfree(code); - - return err; - } -#endif /* CONFIG_IPPP_FILTER */ - default: - break; - } - return 0; -} - -__poll_t -isdn_ppp_poll(struct file *file, poll_table *wait) -{ - __poll_t mask; - struct ippp_buf_queue *bf, *bl; - u_long flags; - struct ippp_struct *is; - - is = file->private_data; - - if (is->debug & 0x2) - printk(KERN_DEBUG "isdn_ppp_poll: minor: %d\n", - iminor(file_inode(file))); - - /* just registers wait_queue hook. This doesn't really wait. */ - poll_wait(file, &is->wq, wait); - - if (!(is->state & IPPP_OPEN)) { - if (is->state == IPPP_CLOSEWAIT) - return EPOLLHUP; - printk(KERN_DEBUG "isdn_ppp: device not open\n"); - return EPOLLERR; - } - /* we're always ready to send .. */ - mask = EPOLLOUT | EPOLLWRNORM; - - spin_lock_irqsave(&is->buflock, flags); - bl = is->last; - bf = is->first; - /* - * if IPPP_NOBLOCK is set we return even if we have nothing to read - */ - if (bf->next != bl || (is->state & IPPP_NOBLOCK)) { - is->state &= ~IPPP_NOBLOCK; - mask |= EPOLLIN | EPOLLRDNORM; - } - spin_unlock_irqrestore(&is->buflock, flags); - return mask; -} - -/* - * fill up isdn_ppp_read() queue .. - */ - -static int -isdn_ppp_fill_rq(unsigned char *buf, int len, int proto, int slot) -{ - struct ippp_buf_queue *bf, *bl; - u_long flags; - u_char *nbuf; - struct ippp_struct *is; - - if (slot < 0 || slot >= ISDN_MAX_CHANNELS) { - printk(KERN_WARNING "ippp: illegal slot(%d).\n", slot); - return 0; - } - is = ippp_table[slot]; - - if (!(is->state & IPPP_CONNECT)) { - printk(KERN_DEBUG "ippp: device not activated.\n"); - return 0; - } - nbuf = kmalloc(len + 4, GFP_ATOMIC); - if (!nbuf) { - printk(KERN_WARNING "ippp: Can't alloc buf\n"); - return 0; - } - nbuf[0] = PPP_ALLSTATIONS; - nbuf[1] = PPP_UI; - nbuf[2] = proto >> 8; - nbuf[3] = proto & 0xff; - memcpy(nbuf + 4, buf, len); - - spin_lock_irqsave(&is->buflock, flags); - bf = is->first; - bl = is->last; - - if (bf == bl) { - printk(KERN_WARNING "ippp: Queue is full; discarding first buffer\n"); - bf = bf->next; - kfree(bf->buf); - is->first = bf; - } - bl->buf = (char *) nbuf; - bl->len = len + 4; - - is->last = bl->next; - spin_unlock_irqrestore(&is->buflock, flags); - wake_up_interruptible(&is->wq); - return len; -} - -/* - * read() .. non-blocking: ipppd calls it only after select() - * reports, that there is data - */ - -int -isdn_ppp_read(int min, struct file *file, char __user *buf, int count) -{ - struct ippp_struct *is; - struct ippp_buf_queue *b; - u_long flags; - u_char *save_buf; - - is = file->private_data; - - if (!(is->state & IPPP_OPEN)) - return 0; - - spin_lock_irqsave(&is->buflock, flags); - b = is->first->next; - save_buf = b->buf; - if (!save_buf) { - spin_unlock_irqrestore(&is->buflock, flags); - return -EAGAIN; - } - if (b->len < count) - count = b->len; - b->buf = NULL; - is->first = b; - - spin_unlock_irqrestore(&is->buflock, flags); - if (copy_to_user(buf, save_buf, count)) - count = -EFAULT; - kfree(save_buf); - - return count; -} - -/* - * ipppd wanna write a packet to the card .. non-blocking - */ - -int -isdn_ppp_write(int min, struct file *file, const char __user *buf, int count) -{ - isdn_net_local *lp; - struct ippp_struct *is; - int proto; - - is = file->private_data; - - if (!(is->state & IPPP_CONNECT)) - return 0; - - lp = is->lp; - - /* -> push it directly to the lowlevel interface */ - - if (!lp) - printk(KERN_DEBUG "isdn_ppp_write: lp == NULL\n"); - else { - if (lp->isdn_device < 0 || lp->isdn_channel < 0) { - unsigned char protobuf[4]; - /* - * Don't reset huptimer for - * LCP packets. (Echo requests). - */ - if (copy_from_user(protobuf, buf, 4)) - return -EFAULT; - - proto = PPP_PROTOCOL(protobuf); - if (proto != PPP_LCP) - lp->huptimer = 0; - - return 0; - } - - if ((dev->drv[lp->isdn_device]->flags & DRV_FLAG_RUNNING) && - lp->dialstate == 0 && - (lp->flags & ISDN_NET_CONNECTED)) { - unsigned short hl; - struct sk_buff *skb; - unsigned char *cpy_buf; - /* - * we need to reserve enough space in front of - * sk_buff. old call to dev_alloc_skb only reserved - * 16 bytes, now we are looking what the driver want - */ - hl = dev->drv[lp->isdn_device]->interface->hl_hdrlen; - skb = alloc_skb(hl + count, GFP_ATOMIC); - if (!skb) { - printk(KERN_WARNING "isdn_ppp_write: out of memory!\n"); - return count; - } - skb_reserve(skb, hl); - cpy_buf = skb_put(skb, count); - if (copy_from_user(cpy_buf, buf, count)) - { - kfree_skb(skb); - return -EFAULT; - } - - /* - * Don't reset huptimer for - * LCP packets. (Echo requests). - */ - proto = PPP_PROTOCOL(cpy_buf); - if (proto != PPP_LCP) - lp->huptimer = 0; - - if (is->debug & 0x40) { - printk(KERN_DEBUG "ppp xmit: len %d\n", (int) skb->len); - isdn_ppp_frame_log("xmit", skb->data, skb->len, 32, is->unit, lp->ppp_slot); - } - - isdn_ppp_send_ccp(lp->netdev, lp, skb); /* keeps CCP/compression states in sync */ - - isdn_net_write_super(lp, skb); - } - } - return count; -} - -/* - * init memory, structures etc. - */ - -int -isdn_ppp_init(void) -{ - int i, - j; - -#ifdef CONFIG_ISDN_MPP - if (isdn_ppp_mp_bundle_array_init() < 0) - return -ENOMEM; -#endif /* CONFIG_ISDN_MPP */ - - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - if (!(ippp_table[i] = kzalloc(sizeof(struct ippp_struct), GFP_KERNEL))) { - printk(KERN_WARNING "isdn_ppp_init: Could not alloc ippp_table\n"); - for (j = 0; j < i; j++) - kfree(ippp_table[j]); - return -1; - } - spin_lock_init(&ippp_table[i]->buflock); - ippp_table[i]->state = 0; - ippp_table[i]->first = ippp_table[i]->rq + NUM_RCV_BUFFS - 1; - ippp_table[i]->last = ippp_table[i]->rq; - - for (j = 0; j < NUM_RCV_BUFFS; j++) { - ippp_table[i]->rq[j].buf = NULL; - ippp_table[i]->rq[j].last = ippp_table[i]->rq + - (NUM_RCV_BUFFS + j - 1) % NUM_RCV_BUFFS; - ippp_table[i]->rq[j].next = ippp_table[i]->rq + (j + 1) % NUM_RCV_BUFFS; - } - } - return 0; -} - -void -isdn_ppp_cleanup(void) -{ - int i; - - for (i = 0; i < ISDN_MAX_CHANNELS; i++) - kfree(ippp_table[i]); - -#ifdef CONFIG_ISDN_MPP - kfree(isdn_ppp_bundle_arr); -#endif /* CONFIG_ISDN_MPP */ - -} - -/* - * check for address/control field and skip if allowed - * retval != 0 -> discard packet silently - */ -static int isdn_ppp_skip_ac(struct ippp_struct *is, struct sk_buff *skb) -{ - if (skb->len < 1) - return -1; - - if (skb->data[0] == 0xff) { - if (skb->len < 2) - return -1; - - if (skb->data[1] != 0x03) - return -1; - - // skip address/control (AC) field - skb_pull(skb, 2); - } else { - if (is->pppcfg & SC_REJ_COMP_AC) - // if AC compression was not negotiated, but used, discard packet - return -1; - } - return 0; -} - -/* - * get the PPP protocol header and pull skb - * retval < 0 -> discard packet silently - */ -static int isdn_ppp_strip_proto(struct sk_buff *skb) -{ - int proto; - - if (skb->len < 1) - return -1; - - if (skb->data[0] & 0x1) { - // protocol field is compressed - proto = skb->data[0]; - skb_pull(skb, 1); - } else { - if (skb->len < 2) - return -1; - proto = ((int) skb->data[0] << 8) + skb->data[1]; - skb_pull(skb, 2); - } - return proto; -} - - -/* - * handler for incoming packets on a syncPPP interface - */ -void isdn_ppp_receive(isdn_net_dev *net_dev, isdn_net_local *lp, struct sk_buff *skb) -{ - struct ippp_struct *is; - int slot; - int proto; - - BUG_ON(net_dev->local->master); // we're called with the master device always - - slot = lp->ppp_slot; - if (slot < 0 || slot >= ISDN_MAX_CHANNELS) { - printk(KERN_ERR "isdn_ppp_receive: lp->ppp_slot(%d)\n", - lp->ppp_slot); - kfree_skb(skb); - return; - } - is = ippp_table[slot]; - - if (is->debug & 0x4) { - printk(KERN_DEBUG "ippp_receive: is:%08lx lp:%08lx slot:%d unit:%d len:%d\n", - (long)is, (long)lp, lp->ppp_slot, is->unit, (int)skb->len); - isdn_ppp_frame_log("receive", skb->data, skb->len, 32, is->unit, lp->ppp_slot); - } - - if (isdn_ppp_skip_ac(is, skb) < 0) { - kfree_skb(skb); - return; - } - proto = isdn_ppp_strip_proto(skb); - if (proto < 0) { - kfree_skb(skb); - return; - } - -#ifdef CONFIG_ISDN_MPP - if (is->compflags & SC_LINK_DECOMP_ON) { - skb = isdn_ppp_decompress(skb, is, NULL, &proto); - if (!skb) // decompression error - return; - } - - if (!(is->mpppcfg & SC_REJ_MP_PROT)) { // we agreed to receive MPPP - if (proto == PPP_MP) { - isdn_ppp_mp_receive(net_dev, lp, skb); - return; - } - } -#endif - isdn_ppp_push_higher(net_dev, lp, skb, proto); -} - -/* - * we receive a reassembled frame, MPPP has been taken care of before. - * address/control and protocol have been stripped from the skb - * note: net_dev has to be master net_dev - */ -static void -isdn_ppp_push_higher(isdn_net_dev *net_dev, isdn_net_local *lp, struct sk_buff *skb, int proto) -{ - struct net_device *dev = net_dev->dev; - struct ippp_struct *is, *mis; - isdn_net_local *mlp = NULL; - int slot; - - slot = lp->ppp_slot; - if (slot < 0 || slot >= ISDN_MAX_CHANNELS) { - printk(KERN_ERR "isdn_ppp_push_higher: lp->ppp_slot(%d)\n", - lp->ppp_slot); - goto drop_packet; - } - is = ippp_table[slot]; - - if (lp->master) { // FIXME? - mlp = ISDN_MASTER_PRIV(lp); - slot = mlp->ppp_slot; - if (slot < 0 || slot >= ISDN_MAX_CHANNELS) { - printk(KERN_ERR "isdn_ppp_push_higher: master->ppp_slot(%d)\n", - lp->ppp_slot); - goto drop_packet; - } - } - mis = ippp_table[slot]; - - if (is->debug & 0x10) { - printk(KERN_DEBUG "push, skb %d %04x\n", (int) skb->len, proto); - isdn_ppp_frame_log("rpush", skb->data, skb->len, 32, is->unit, lp->ppp_slot); - } - if (mis->compflags & SC_DECOMP_ON) { - skb = isdn_ppp_decompress(skb, is, mis, &proto); - if (!skb) // decompression error - return; - } - switch (proto) { - case PPP_IPX: /* untested */ - if (is->debug & 0x20) - printk(KERN_DEBUG "isdn_ppp: IPX\n"); - skb->protocol = htons(ETH_P_IPX); - break; - case PPP_IP: - if (is->debug & 0x20) - printk(KERN_DEBUG "isdn_ppp: IP\n"); - skb->protocol = htons(ETH_P_IP); - break; - case PPP_COMP: - case PPP_COMPFRAG: - printk(KERN_INFO "isdn_ppp: unexpected compressed frame dropped\n"); - goto drop_packet; -#ifdef CONFIG_ISDN_PPP_VJ - case PPP_VJC_UNCOMP: - if (is->debug & 0x20) - printk(KERN_DEBUG "isdn_ppp: VJC_UNCOMP\n"); - if (net_dev->local->ppp_slot < 0) { - printk(KERN_ERR "%s: net_dev->local->ppp_slot(%d) out of range\n", - __func__, net_dev->local->ppp_slot); - goto drop_packet; - } - if (slhc_remember(ippp_table[net_dev->local->ppp_slot]->slcomp, skb->data, skb->len) <= 0) { - printk(KERN_WARNING "isdn_ppp: received illegal VJC_UNCOMP frame!\n"); - goto drop_packet; - } - skb->protocol = htons(ETH_P_IP); - break; - case PPP_VJC_COMP: - if (is->debug & 0x20) - printk(KERN_DEBUG "isdn_ppp: VJC_COMP\n"); - { - struct sk_buff *skb_old = skb; - int pkt_len; - skb = dev_alloc_skb(skb_old->len + 128); - - if (!skb) { - printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name); - skb = skb_old; - goto drop_packet; - } - skb_put(skb, skb_old->len + 128); - skb_copy_from_linear_data(skb_old, skb->data, - skb_old->len); - if (net_dev->local->ppp_slot < 0) { - printk(KERN_ERR "%s: net_dev->local->ppp_slot(%d) out of range\n", - __func__, net_dev->local->ppp_slot); - goto drop_packet; - } - pkt_len = slhc_uncompress(ippp_table[net_dev->local->ppp_slot]->slcomp, - skb->data, skb_old->len); - kfree_skb(skb_old); - if (pkt_len < 0) - goto drop_packet; - - skb_trim(skb, pkt_len); - skb->protocol = htons(ETH_P_IP); - } - break; -#endif - case PPP_CCP: - case PPP_CCPFRAG: - isdn_ppp_receive_ccp(net_dev, lp, skb, proto); - /* Dont pop up ResetReq/Ack stuff to the daemon any - longer - the job is done already */ - if (skb->data[0] == CCP_RESETREQ || - skb->data[0] == CCP_RESETACK) - break; - /* fall through */ - default: - isdn_ppp_fill_rq(skb->data, skb->len, proto, lp->ppp_slot); /* push data to pppd device */ - kfree_skb(skb); - return; - } - -#ifdef CONFIG_IPPP_FILTER - /* check if the packet passes the pass and active filters - * the filter instructions are constructed assuming - * a four-byte PPP header on each packet (which is still present) */ - skb_push(skb, 4); - - { - u_int16_t *p = (u_int16_t *) skb->data; - - *p = 0; /* indicate inbound */ - } - - if (is->pass_filter - && BPF_PROG_RUN(is->pass_filter, skb) == 0) { - if (is->debug & 0x2) - printk(KERN_DEBUG "IPPP: inbound frame filtered.\n"); - kfree_skb(skb); - return; - } - if (!(is->active_filter - && BPF_PROG_RUN(is->active_filter, skb) == 0)) { - if (is->debug & 0x2) - printk(KERN_DEBUG "IPPP: link-active filter: resetting huptimer.\n"); - lp->huptimer = 0; - if (mlp) - mlp->huptimer = 0; - } - skb_pull(skb, 4); -#else /* CONFIG_IPPP_FILTER */ - lp->huptimer = 0; - if (mlp) - mlp->huptimer = 0; -#endif /* CONFIG_IPPP_FILTER */ - skb->dev = dev; - skb_reset_mac_header(skb); - netif_rx(skb); - /* net_dev->local->stats.rx_packets++; done in isdn_net.c */ - return; - -drop_packet: - net_dev->local->stats.rx_dropped++; - kfree_skb(skb); -} - -/* - * isdn_ppp_skb_push .. - * checks whether we have enough space at the beginning of the skb - * and allocs a new SKB if necessary - */ -static unsigned char *isdn_ppp_skb_push(struct sk_buff **skb_p, int len) -{ - struct sk_buff *skb = *skb_p; - - if (skb_headroom(skb) < len) { - struct sk_buff *nskb = skb_realloc_headroom(skb, len); - - if (!nskb) { - printk(KERN_ERR "isdn_ppp_skb_push: can't realloc headroom!\n"); - dev_kfree_skb(skb); - return NULL; - } - printk(KERN_DEBUG "isdn_ppp_skb_push:under %d %d\n", skb_headroom(skb), len); - dev_kfree_skb(skb); - *skb_p = nskb; - return skb_push(nskb, len); - } - return skb_push(skb, len); -} - -/* - * send ppp frame .. we expect a PIDCOMPressable proto -- - * (here: currently always PPP_IP,PPP_VJC_COMP,PPP_VJC_UNCOMP) - * - * VJ compression may change skb pointer!!! .. requeue with old - * skb isn't allowed!! - */ - -int -isdn_ppp_xmit(struct sk_buff *skb, struct net_device *netdev) -{ - isdn_net_local *lp, *mlp; - isdn_net_dev *nd; - unsigned int proto = PPP_IP; /* 0x21 */ - struct ippp_struct *ipt, *ipts; - int slot, retval = NETDEV_TX_OK; - - mlp = netdev_priv(netdev); - nd = mlp->netdev; /* get master lp */ - - slot = mlp->ppp_slot; - if (slot < 0 || slot >= ISDN_MAX_CHANNELS) { - printk(KERN_ERR "isdn_ppp_xmit: lp->ppp_slot(%d)\n", - mlp->ppp_slot); - kfree_skb(skb); - goto out; - } - ipts = ippp_table[slot]; - - if (!(ipts->pppcfg & SC_ENABLE_IP)) { /* PPP connected ? */ - if (ipts->debug & 0x1) - printk(KERN_INFO "%s: IP frame delayed.\n", netdev->name); - retval = NETDEV_TX_BUSY; - goto out; - } - - switch (ntohs(skb->protocol)) { - case ETH_P_IP: - proto = PPP_IP; - break; - case ETH_P_IPX: - proto = PPP_IPX; /* untested */ - break; - default: - printk(KERN_ERR "isdn_ppp: skipped unsupported protocol: %#x.\n", - skb->protocol); - dev_kfree_skb(skb); - goto out; - } - - lp = isdn_net_get_locked_lp(nd); - if (!lp) { - printk(KERN_WARNING "%s: all channels busy - requeuing!\n", netdev->name); - retval = NETDEV_TX_BUSY; - goto out; - } - /* we have our lp locked from now on */ - - slot = lp->ppp_slot; - if (slot < 0 || slot >= ISDN_MAX_CHANNELS) { - printk(KERN_ERR "isdn_ppp_xmit: lp->ppp_slot(%d)\n", - lp->ppp_slot); - kfree_skb(skb); - goto unlock; - } - ipt = ippp_table[slot]; - - /* - * after this line .. requeueing in the device queue is no longer allowed!!! - */ - - /* Pull off the fake header we stuck on earlier to keep - * the fragmentation code happy. - */ - skb_pull(skb, IPPP_MAX_HEADER); - -#ifdef CONFIG_IPPP_FILTER - /* check if we should pass this packet - * the filter instructions are constructed assuming - * a four-byte PPP header on each packet */ - *(u8 *)skb_push(skb, 4) = 1; /* indicate outbound */ - - { - __be16 *p = (__be16 *)skb->data; - - p++; - *p = htons(proto); - } - - if (ipt->pass_filter - && BPF_PROG_RUN(ipt->pass_filter, skb) == 0) { - if (ipt->debug & 0x4) - printk(KERN_DEBUG "IPPP: outbound frame filtered.\n"); - kfree_skb(skb); - goto unlock; - } - if (!(ipt->active_filter - && BPF_PROG_RUN(ipt->active_filter, skb) == 0)) { - if (ipt->debug & 0x4) - printk(KERN_DEBUG "IPPP: link-active filter: resetting huptimer.\n"); - lp->huptimer = 0; - } - skb_pull(skb, 4); -#else /* CONFIG_IPPP_FILTER */ - lp->huptimer = 0; -#endif /* CONFIG_IPPP_FILTER */ - - if (ipt->debug & 0x4) - printk(KERN_DEBUG "xmit skb, len %d\n", (int) skb->len); - if (ipts->debug & 0x40) - isdn_ppp_frame_log("xmit0", skb->data, skb->len, 32, ipts->unit, lp->ppp_slot); - -#ifdef CONFIG_ISDN_PPP_VJ - if (proto == PPP_IP && ipts->pppcfg & SC_COMP_TCP) { /* ipts here? probably yes, but check this again */ - struct sk_buff *new_skb; - unsigned short hl; - /* - * we need to reserve enough space in front of - * sk_buff. old call to dev_alloc_skb only reserved - * 16 bytes, now we are looking what the driver want. - */ - hl = dev->drv[lp->isdn_device]->interface->hl_hdrlen + IPPP_MAX_HEADER; - /* - * Note: hl might still be insufficient because the method - * above does not account for a possibible MPPP slave channel - * which had larger HL header space requirements than the - * master. - */ - new_skb = alloc_skb(hl + skb->len, GFP_ATOMIC); - if (new_skb) { - u_char *buf; - int pktlen; - - skb_reserve(new_skb, hl); - new_skb->dev = skb->dev; - skb_put(new_skb, skb->len); - buf = skb->data; - - pktlen = slhc_compress(ipts->slcomp, skb->data, skb->len, new_skb->data, - &buf, !(ipts->pppcfg & SC_NO_TCP_CCID)); - - if (buf != skb->data) { - if (new_skb->data != buf) - printk(KERN_ERR "isdn_ppp: FATAL error after slhc_compress!!\n"); - dev_kfree_skb(skb); - skb = new_skb; - } else { - dev_kfree_skb(new_skb); - } - - skb_trim(skb, pktlen); - if (skb->data[0] & SL_TYPE_COMPRESSED_TCP) { /* cslip? style -> PPP */ - proto = PPP_VJC_COMP; - skb->data[0] ^= SL_TYPE_COMPRESSED_TCP; - } else { - if (skb->data[0] >= SL_TYPE_UNCOMPRESSED_TCP) - proto = PPP_VJC_UNCOMP; - skb->data[0] = (skb->data[0] & 0x0f) | 0x40; - } - } - } -#endif - - /* - * normal (single link) or bundle compression - */ - if (ipts->compflags & SC_COMP_ON) { - /* We send compressed only if both down- und upstream - compression is negotiated, that means, CCP is up */ - if (ipts->compflags & SC_DECOMP_ON) { - skb = isdn_ppp_compress(skb, &proto, ipt, ipts, 0); - } else { - printk(KERN_DEBUG "isdn_ppp: CCP not yet up - sending as-is\n"); - } - } - - if (ipt->debug & 0x24) - printk(KERN_DEBUG "xmit2 skb, len %d, proto %04x\n", (int) skb->len, proto); - -#ifdef CONFIG_ISDN_MPP - if (ipt->mpppcfg & SC_MP_PROT) { - /* we get mp_seqno from static isdn_net_local */ - long mp_seqno = ipts->mp_seqno; - ipts->mp_seqno++; - if (ipt->mpppcfg & SC_OUT_SHORT_SEQ) { - unsigned char *data = isdn_ppp_skb_push(&skb, 3); - if (!data) - goto unlock; - mp_seqno &= 0xfff; - data[0] = MP_BEGIN_FRAG | MP_END_FRAG | ((mp_seqno >> 8) & 0xf); /* (B)egin & (E)ndbit .. */ - data[1] = mp_seqno & 0xff; - data[2] = proto; /* PID compression */ - } else { - unsigned char *data = isdn_ppp_skb_push(&skb, 5); - if (!data) - goto unlock; - data[0] = MP_BEGIN_FRAG | MP_END_FRAG; /* (B)egin & (E)ndbit .. */ - data[1] = (mp_seqno >> 16) & 0xff; /* sequence number: 24bit */ - data[2] = (mp_seqno >> 8) & 0xff; - data[3] = (mp_seqno >> 0) & 0xff; - data[4] = proto; /* PID compression */ - } - proto = PPP_MP; /* MP Protocol, 0x003d */ - } -#endif - - /* - * 'link in bundle' compression ... - */ - if (ipt->compflags & SC_LINK_COMP_ON) - skb = isdn_ppp_compress(skb, &proto, ipt, ipts, 1); - - if ((ipt->pppcfg & SC_COMP_PROT) && (proto <= 0xff)) { - unsigned char *data = isdn_ppp_skb_push(&skb, 1); - if (!data) - goto unlock; - data[0] = proto & 0xff; - } - else { - unsigned char *data = isdn_ppp_skb_push(&skb, 2); - if (!data) - goto unlock; - data[0] = (proto >> 8) & 0xff; - data[1] = proto & 0xff; - } - if (!(ipt->pppcfg & SC_COMP_AC)) { - unsigned char *data = isdn_ppp_skb_push(&skb, 2); - if (!data) - goto unlock; - data[0] = 0xff; /* All Stations */ - data[1] = 0x03; /* Unnumbered information */ - } - - /* tx-stats are now updated via BSENT-callback */ - - if (ipts->debug & 0x40) { - printk(KERN_DEBUG "skb xmit: len: %d\n", (int) skb->len); - isdn_ppp_frame_log("xmit", skb->data, skb->len, 32, ipt->unit, lp->ppp_slot); - } - - isdn_net_writebuf_skb(lp, skb); - -unlock: - spin_unlock_bh(&lp->xmit_lock); -out: - return retval; -} - -#ifdef CONFIG_IPPP_FILTER -/* - * check if this packet may trigger auto-dial. - */ - -int isdn_ppp_autodial_filter(struct sk_buff *skb, isdn_net_local *lp) -{ - struct ippp_struct *is = ippp_table[lp->ppp_slot]; - u_int16_t proto; - int drop = 0; - - switch (ntohs(skb->protocol)) { - case ETH_P_IP: - proto = PPP_IP; - break; - case ETH_P_IPX: - proto = PPP_IPX; - break; - default: - printk(KERN_ERR "isdn_ppp_autodial_filter: unsupported protocol 0x%x.\n", - skb->protocol); - return 1; - } - - /* the filter instructions are constructed assuming - * a four-byte PPP header on each packet. we have to - * temporarily remove part of the fake header stuck on - * earlier. - */ - *(u8 *)skb_pull(skb, IPPP_MAX_HEADER - 4) = 1; /* indicate outbound */ - - { - __be16 *p = (__be16 *)skb->data; - - p++; - *p = htons(proto); - } - - drop |= is->pass_filter - && BPF_PROG_RUN(is->pass_filter, skb) == 0; - drop |= is->active_filter - && BPF_PROG_RUN(is->active_filter, skb) == 0; - - skb_push(skb, IPPP_MAX_HEADER - 4); - return drop; -} -#endif -#ifdef CONFIG_ISDN_MPP - -/* this is _not_ rfc1990 header, but something we convert both short and long - * headers to for convinience's sake: - * byte 0 is flags as in rfc1990 - * bytes 1...4 is 24-bit seqence number converted to host byte order - */ -#define MP_HEADER_LEN 5 - -#define MP_LONGSEQ_MASK 0x00ffffff -#define MP_SHORTSEQ_MASK 0x00000fff -#define MP_LONGSEQ_MAX MP_LONGSEQ_MASK -#define MP_SHORTSEQ_MAX MP_SHORTSEQ_MASK -#define MP_LONGSEQ_MAXBIT ((MP_LONGSEQ_MASK + 1) >> 1) -#define MP_SHORTSEQ_MAXBIT ((MP_SHORTSEQ_MASK + 1) >> 1) - -/* sequence-wrap safe comparisons (for long sequence)*/ -#define MP_LT(a, b) ((a - b) & MP_LONGSEQ_MAXBIT) -#define MP_LE(a, b) !((b - a) & MP_LONGSEQ_MAXBIT) -#define MP_GT(a, b) ((b - a) & MP_LONGSEQ_MAXBIT) -#define MP_GE(a, b) !((a - b) & MP_LONGSEQ_MAXBIT) - -#define MP_SEQ(f) ((*(u32 *)(f->data + 1))) -#define MP_FLAGS(f) (f->data[0]) - -static int isdn_ppp_mp_bundle_array_init(void) -{ - int i; - int sz = ISDN_MAX_CHANNELS * sizeof(ippp_bundle); - if ((isdn_ppp_bundle_arr = kzalloc(sz, GFP_KERNEL)) == NULL) - return -ENOMEM; - for (i = 0; i < ISDN_MAX_CHANNELS; i++) - spin_lock_init(&isdn_ppp_bundle_arr[i].lock); - return 0; -} - -static ippp_bundle *isdn_ppp_mp_bundle_alloc(void) -{ - int i; - for (i = 0; i < ISDN_MAX_CHANNELS; i++) - if (isdn_ppp_bundle_arr[i].ref_ct <= 0) - return (isdn_ppp_bundle_arr + i); - return NULL; -} - -static int isdn_ppp_mp_init(isdn_net_local *lp, ippp_bundle *add_to) -{ - struct ippp_struct *is; - - if (lp->ppp_slot < 0) { - printk(KERN_ERR "%s: lp->ppp_slot(%d) out of range\n", - __func__, lp->ppp_slot); - return (-EINVAL); - } - - is = ippp_table[lp->ppp_slot]; - if (add_to) { - if (lp->netdev->pb) - lp->netdev->pb->ref_ct--; - lp->netdev->pb = add_to; - } else { /* first link in a bundle */ - is->mp_seqno = 0; - if ((lp->netdev->pb = isdn_ppp_mp_bundle_alloc()) == NULL) - return -ENOMEM; - lp->next = lp->last = lp; /* nobody else in a queue */ - lp->netdev->pb->frags = NULL; - lp->netdev->pb->frames = 0; - lp->netdev->pb->seq = UINT_MAX; - } - lp->netdev->pb->ref_ct++; - - is->last_link_seqno = 0; - return 0; -} - -static u32 isdn_ppp_mp_get_seq(int short_seq, - struct sk_buff *skb, u32 last_seq); -static struct sk_buff *isdn_ppp_mp_discard(ippp_bundle *mp, - struct sk_buff *from, struct sk_buff *to); -static void isdn_ppp_mp_reassembly(isdn_net_dev *net_dev, isdn_net_local *lp, - struct sk_buff *from, struct sk_buff *to); -static void isdn_ppp_mp_free_skb(ippp_bundle *mp, struct sk_buff *skb); -static void isdn_ppp_mp_print_recv_pkt(int slot, struct sk_buff *skb); - -static void isdn_ppp_mp_receive(isdn_net_dev *net_dev, isdn_net_local *lp, - struct sk_buff *skb) -{ - struct ippp_struct *is; - isdn_net_local *lpq; - ippp_bundle *mp; - isdn_mppp_stats *stats; - struct sk_buff *newfrag, *frag, *start, *nextf; - u32 newseq, minseq, thisseq; - unsigned long flags; - int slot; - - spin_lock_irqsave(&net_dev->pb->lock, flags); - mp = net_dev->pb; - stats = &mp->stats; - slot = lp->ppp_slot; - if (slot < 0 || slot >= ISDN_MAX_CHANNELS) { - printk(KERN_ERR "%s: lp->ppp_slot(%d)\n", - __func__, lp->ppp_slot); - stats->frame_drops++; - dev_kfree_skb(skb); - spin_unlock_irqrestore(&mp->lock, flags); - return; - } - is = ippp_table[slot]; - if (++mp->frames > stats->max_queue_len) - stats->max_queue_len = mp->frames; - - if (is->debug & 0x8) - isdn_ppp_mp_print_recv_pkt(lp->ppp_slot, skb); - - newseq = isdn_ppp_mp_get_seq(is->mpppcfg & SC_IN_SHORT_SEQ, - skb, is->last_link_seqno); - - - /* if this packet seq # is less than last already processed one, - * toss it right away, but check for sequence start case first - */ - if (mp->seq > MP_LONGSEQ_MAX && (newseq & MP_LONGSEQ_MAXBIT)) { - mp->seq = newseq; /* the first packet: required for - * rfc1990 non-compliant clients -- - * prevents constant packet toss */ - } else if (MP_LT(newseq, mp->seq)) { - stats->frame_drops++; - isdn_ppp_mp_free_skb(mp, skb); - spin_unlock_irqrestore(&mp->lock, flags); - return; - } - - /* find the minimum received sequence number over all links */ - is->last_link_seqno = minseq = newseq; - for (lpq = net_dev->queue;;) { - slot = lpq->ppp_slot; - if (slot < 0 || slot >= ISDN_MAX_CHANNELS) { - printk(KERN_ERR "%s: lpq->ppp_slot(%d)\n", - __func__, lpq->ppp_slot); - } else { - u32 lls = ippp_table[slot]->last_link_seqno; - if (MP_LT(lls, minseq)) - minseq = lls; - } - if ((lpq = lpq->next) == net_dev->queue) - break; - } - if (MP_LT(minseq, mp->seq)) - minseq = mp->seq; /* can't go beyond already processed - * packets */ - newfrag = skb; - - /* if this new fragment is before the first one, then enqueue it now. */ - if ((frag = mp->frags) == NULL || MP_LT(newseq, MP_SEQ(frag))) { - newfrag->next = frag; - mp->frags = frag = newfrag; - newfrag = NULL; - } - - start = MP_FLAGS(frag) & MP_BEGIN_FRAG && - MP_SEQ(frag) == mp->seq ? frag : NULL; - - /* - * main fragment traversing loop - * - * try to accomplish several tasks: - * - insert new fragment into the proper sequence slot (once that's done - * newfrag will be set to NULL) - * - reassemble any complete fragment sequence (non-null 'start' - * indicates there is a contiguous sequence present) - * - discard any incomplete sequences that are below minseq -- due - * to the fact that sender always increment sequence number, if there - * is an incomplete sequence below minseq, no new fragments would - * come to complete such sequence and it should be discarded - * - * loop completes when we accomplished the following tasks: - * - new fragment is inserted in the proper sequence ('newfrag' is - * set to NULL) - * - we hit a gap in the sequence, so no reassembly/processing is - * possible ('start' would be set to NULL) - * - * algorithm for this code is derived from code in the book - * 'PPP Design And Debugging' by James Carlson (Addison-Wesley) - */ - while (start != NULL || newfrag != NULL) { - - thisseq = MP_SEQ(frag); - nextf = frag->next; - - /* drop any duplicate fragments */ - if (newfrag != NULL && thisseq == newseq) { - isdn_ppp_mp_free_skb(mp, newfrag); - newfrag = NULL; - } - - /* insert new fragment before next element if possible. */ - if (newfrag != NULL && (nextf == NULL || - MP_LT(newseq, MP_SEQ(nextf)))) { - newfrag->next = nextf; - frag->next = nextf = newfrag; - newfrag = NULL; - } - - if (start != NULL) { - /* check for misplaced start */ - if (start != frag && (MP_FLAGS(frag) & MP_BEGIN_FRAG)) { - printk(KERN_WARNING"isdn_mppp(seq %d): new " - "BEGIN flag with no prior END", thisseq); - stats->seqerrs++; - stats->frame_drops++; - start = isdn_ppp_mp_discard(mp, start, frag); - nextf = frag->next; - } - } else if (MP_LE(thisseq, minseq)) { - if (MP_FLAGS(frag) & MP_BEGIN_FRAG) - start = frag; - else { - if (MP_FLAGS(frag) & MP_END_FRAG) - stats->frame_drops++; - if (mp->frags == frag) - mp->frags = nextf; - isdn_ppp_mp_free_skb(mp, frag); - frag = nextf; - continue; - } - } - - /* if start is non-null and we have end fragment, then - * we have full reassembly sequence -- reassemble - * and process packet now - */ - if (start != NULL && (MP_FLAGS(frag) & MP_END_FRAG)) { - minseq = mp->seq = (thisseq + 1) & MP_LONGSEQ_MASK; - /* Reassemble the packet then dispatch it */ - isdn_ppp_mp_reassembly(net_dev, lp, start, nextf); - - start = NULL; - frag = NULL; - - mp->frags = nextf; - } - - /* check if need to update start pointer: if we just - * reassembled the packet and sequence is contiguous - * then next fragment should be the start of new reassembly - * if sequence is contiguous, but we haven't reassembled yet, - * keep going. - * if sequence is not contiguous, either clear everything - * below low watermark and set start to the next frag or - * clear start ptr. - */ - if (nextf != NULL && - ((thisseq + 1) & MP_LONGSEQ_MASK) == MP_SEQ(nextf)) { - /* if we just reassembled and the next one is here, - * then start another reassembly. */ - - if (frag == NULL) { - if (MP_FLAGS(nextf) & MP_BEGIN_FRAG) - start = nextf; - else - { - printk(KERN_WARNING"isdn_mppp(seq %d):" - " END flag with no following " - "BEGIN", thisseq); - stats->seqerrs++; - } - } - - } else { - if (nextf != NULL && frag != NULL && - MP_LT(thisseq, minseq)) { - /* we've got a break in the sequence - * and we not at the end yet - * and we did not just reassembled - *(if we did, there wouldn't be anything before) - * and we below the low watermark - * discard all the frames below low watermark - * and start over */ - stats->frame_drops++; - mp->frags = isdn_ppp_mp_discard(mp, start, nextf); - } - /* break in the sequence, no reassembly */ - start = NULL; - } - - frag = nextf; - } /* while -- main loop */ - - if (mp->frags == NULL) - mp->frags = frag; - - /* rather straighforward way to deal with (not very) possible - * queue overflow */ - if (mp->frames > MP_MAX_QUEUE_LEN) { - stats->overflows++; - while (mp->frames > MP_MAX_QUEUE_LEN) { - frag = mp->frags->next; - isdn_ppp_mp_free_skb(mp, mp->frags); - mp->frags = frag; - } - } - spin_unlock_irqrestore(&mp->lock, flags); -} - -static void isdn_ppp_mp_cleanup(isdn_net_local *lp) -{ - struct sk_buff *frag = lp->netdev->pb->frags; - struct sk_buff *nextfrag; - while (frag) { - nextfrag = frag->next; - isdn_ppp_mp_free_skb(lp->netdev->pb, frag); - frag = nextfrag; - } - lp->netdev->pb->frags = NULL; -} - -static u32 isdn_ppp_mp_get_seq(int short_seq, - struct sk_buff *skb, u32 last_seq) -{ - u32 seq; - int flags = skb->data[0] & (MP_BEGIN_FRAG | MP_END_FRAG); - - if (!short_seq) - { - seq = ntohl(*(__be32 *)skb->data) & MP_LONGSEQ_MASK; - skb_push(skb, 1); - } - else - { - /* convert 12-bit short seq number to 24-bit long one - */ - seq = ntohs(*(__be16 *)skb->data) & MP_SHORTSEQ_MASK; - - /* check for seqence wrap */ - if (!(seq & MP_SHORTSEQ_MAXBIT) && - (last_seq & MP_SHORTSEQ_MAXBIT) && - (unsigned long)last_seq <= MP_LONGSEQ_MAX) - seq |= (last_seq + MP_SHORTSEQ_MAX + 1) & - (~MP_SHORTSEQ_MASK & MP_LONGSEQ_MASK); - else - seq |= last_seq & (~MP_SHORTSEQ_MASK & MP_LONGSEQ_MASK); - - skb_push(skb, 3); /* put converted seqence back in skb */ - } - *(u32 *)(skb->data + 1) = seq; /* put seqence back in _host_ byte - * order */ - skb->data[0] = flags; /* restore flags */ - return seq; -} - -static struct sk_buff *isdn_ppp_mp_discard(ippp_bundle *mp, - struct sk_buff *from, - struct sk_buff *to) -{ - if (from) - while (from != to) { - struct sk_buff *next = from->next; - isdn_ppp_mp_free_skb(mp, from); - from = next; - } - return from; -} - -static void isdn_ppp_mp_reassembly(isdn_net_dev *net_dev, isdn_net_local *lp, - struct sk_buff *from, struct sk_buff *to) -{ - ippp_bundle *mp = net_dev->pb; - int proto; - struct sk_buff *skb; - unsigned int tot_len; - - if (lp->ppp_slot < 0 || lp->ppp_slot >= ISDN_MAX_CHANNELS) { - printk(KERN_ERR "%s: lp->ppp_slot(%d) out of range\n", - __func__, lp->ppp_slot); - return; - } - if (MP_FLAGS(from) == (MP_BEGIN_FRAG | MP_END_FRAG)) { - if (ippp_table[lp->ppp_slot]->debug & 0x40) - printk(KERN_DEBUG "isdn_mppp: reassembly: frame %d, " - "len %d\n", MP_SEQ(from), from->len); - skb = from; - skb_pull(skb, MP_HEADER_LEN); - mp->frames--; - } else { - struct sk_buff *frag; - int n; - - for (tot_len = n = 0, frag = from; frag != to; frag = frag->next, n++) - tot_len += frag->len - MP_HEADER_LEN; - - if (ippp_table[lp->ppp_slot]->debug & 0x40) - printk(KERN_DEBUG"isdn_mppp: reassembling frames %d " - "to %d, len %d\n", MP_SEQ(from), - (MP_SEQ(from) + n - 1) & MP_LONGSEQ_MASK, tot_len); - if ((skb = dev_alloc_skb(tot_len)) == NULL) { - printk(KERN_ERR "isdn_mppp: cannot allocate sk buff " - "of size %d\n", tot_len); - isdn_ppp_mp_discard(mp, from, to); - return; - } - - while (from != to) { - unsigned int len = from->len - MP_HEADER_LEN; - - skb_copy_from_linear_data_offset(from, MP_HEADER_LEN, - skb_put(skb, len), - len); - frag = from->next; - isdn_ppp_mp_free_skb(mp, from); - from = frag; - } - } - proto = isdn_ppp_strip_proto(skb); - isdn_ppp_push_higher(net_dev, lp, skb, proto); -} - -static void isdn_ppp_mp_free_skb(ippp_bundle *mp, struct sk_buff *skb) -{ - dev_kfree_skb(skb); - mp->frames--; -} - -static void isdn_ppp_mp_print_recv_pkt(int slot, struct sk_buff *skb) -{ - printk(KERN_DEBUG "mp_recv: %d/%d -> %02x %02x %02x %02x %02x %02x\n", - slot, (int) skb->len, - (int) skb->data[0], (int) skb->data[1], (int) skb->data[2], - (int) skb->data[3], (int) skb->data[4], (int) skb->data[5]); -} - -static int -isdn_ppp_bundle(struct ippp_struct *is, int unit) -{ - char ifn[IFNAMSIZ + 1]; - isdn_net_dev *p; - isdn_net_local *lp, *nlp; - int rc; - unsigned long flags; - - sprintf(ifn, "ippp%d", unit); - p = isdn_net_findif(ifn); - if (!p) { - printk(KERN_ERR "ippp_bundle: cannot find %s\n", ifn); - return -EINVAL; - } - - spin_lock_irqsave(&p->pb->lock, flags); - - nlp = is->lp; - lp = p->queue; - if (nlp->ppp_slot < 0 || nlp->ppp_slot >= ISDN_MAX_CHANNELS || - lp->ppp_slot < 0 || lp->ppp_slot >= ISDN_MAX_CHANNELS) { - printk(KERN_ERR "ippp_bundle: binding to invalid slot %d\n", - nlp->ppp_slot < 0 || nlp->ppp_slot >= ISDN_MAX_CHANNELS ? - nlp->ppp_slot : lp->ppp_slot); - rc = -EINVAL; - goto out; - } - - isdn_net_add_to_bundle(p, nlp); - - ippp_table[nlp->ppp_slot]->unit = ippp_table[lp->ppp_slot]->unit; - - /* maybe also SC_CCP stuff */ - ippp_table[nlp->ppp_slot]->pppcfg |= ippp_table[lp->ppp_slot]->pppcfg & - (SC_ENABLE_IP | SC_NO_TCP_CCID | SC_REJ_COMP_TCP); - ippp_table[nlp->ppp_slot]->mpppcfg |= ippp_table[lp->ppp_slot]->mpppcfg & - (SC_MP_PROT | SC_REJ_MP_PROT | SC_OUT_SHORT_SEQ | SC_IN_SHORT_SEQ); - rc = isdn_ppp_mp_init(nlp, p->pb); -out: - spin_unlock_irqrestore(&p->pb->lock, flags); - return rc; -} - -#endif /* CONFIG_ISDN_MPP */ - -/* - * network device ioctl handlers - */ - -static int -isdn_ppp_dev_ioctl_stats(int slot, struct ifreq *ifr, struct net_device *dev) -{ - struct ppp_stats __user *res = ifr->ifr_data; - struct ppp_stats t; - isdn_net_local *lp = netdev_priv(dev); - - /* build a temporary stat struct and copy it to user space */ - - memset(&t, 0, sizeof(struct ppp_stats)); - if (dev->flags & IFF_UP) { - t.p.ppp_ipackets = lp->stats.rx_packets; - t.p.ppp_ibytes = lp->stats.rx_bytes; - t.p.ppp_ierrors = lp->stats.rx_errors; - t.p.ppp_opackets = lp->stats.tx_packets; - t.p.ppp_obytes = lp->stats.tx_bytes; - t.p.ppp_oerrors = lp->stats.tx_errors; -#ifdef CONFIG_ISDN_PPP_VJ - if (slot >= 0 && ippp_table[slot]->slcomp) { - struct slcompress *slcomp = ippp_table[slot]->slcomp; - t.vj.vjs_packets = slcomp->sls_o_compressed + slcomp->sls_o_uncompressed; - t.vj.vjs_compressed = slcomp->sls_o_compressed; - t.vj.vjs_searches = slcomp->sls_o_searches; - t.vj.vjs_misses = slcomp->sls_o_misses; - t.vj.vjs_errorin = slcomp->sls_i_error; - t.vj.vjs_tossed = slcomp->sls_i_tossed; - t.vj.vjs_uncompressedin = slcomp->sls_i_uncompressed; - t.vj.vjs_compressedin = slcomp->sls_i_compressed; - } -#endif - } - if (copy_to_user(res, &t, sizeof(struct ppp_stats))) - return -EFAULT; - return 0; -} - -int -isdn_ppp_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - int error = 0; - int len; - isdn_net_local *lp = netdev_priv(dev); - - - if (lp->p_encap != ISDN_NET_ENCAP_SYNCPPP) - return -EINVAL; - - switch (cmd) { -#define PPP_VERSION "2.3.7" - case SIOCGPPPVER: - len = strlen(PPP_VERSION) + 1; - if (copy_to_user(ifr->ifr_data, PPP_VERSION, len)) - error = -EFAULT; - break; - - case SIOCGPPPSTATS: - error = isdn_ppp_dev_ioctl_stats(lp->ppp_slot, ifr, dev); - break; - default: - error = -EINVAL; - break; - } - return error; -} - -static int -isdn_ppp_if_get_unit(char *name) -{ - int len, - i, - unit = 0, - deci; - - len = strlen(name); - - if (strncmp("ippp", name, 4) || len > 8) - return -1; - - for (i = 0, deci = 1; i < len; i++, deci *= 10) { - char a = name[len - i - 1]; - if (a >= '0' && a <= '9') - unit += (a - '0') * deci; - else - break; - } - if (!i || len - i != 4) - unit = -1; - - return unit; -} - - -int -isdn_ppp_dial_slave(char *name) -{ -#ifdef CONFIG_ISDN_MPP - isdn_net_dev *ndev; - isdn_net_local *lp; - struct net_device *sdev; - - if (!(ndev = isdn_net_findif(name))) - return 1; - lp = ndev->local; - if (!(lp->flags & ISDN_NET_CONNECTED)) - return 5; - - sdev = lp->slave; - while (sdev) { - isdn_net_local *mlp = netdev_priv(sdev); - if (!(mlp->flags & ISDN_NET_CONNECTED)) - break; - sdev = mlp->slave; - } - if (!sdev) - return 2; - - isdn_net_dial_req(netdev_priv(sdev)); - return 0; -#else - return -1; -#endif -} - -int -isdn_ppp_hangup_slave(char *name) -{ -#ifdef CONFIG_ISDN_MPP - isdn_net_dev *ndev; - isdn_net_local *lp; - struct net_device *sdev; - - if (!(ndev = isdn_net_findif(name))) - return 1; - lp = ndev->local; - if (!(lp->flags & ISDN_NET_CONNECTED)) - return 5; - - sdev = lp->slave; - while (sdev) { - isdn_net_local *mlp = netdev_priv(sdev); - - if (mlp->slave) { /* find last connected link in chain */ - isdn_net_local *nlp = ISDN_SLAVE_PRIV(mlp); - - if (!(nlp->flags & ISDN_NET_CONNECTED)) - break; - } else if (mlp->flags & ISDN_NET_CONNECTED) - break; - - sdev = mlp->slave; - } - if (!sdev) - return 2; - - isdn_net_hangup(sdev); - return 0; -#else - return -1; -#endif -} - -/* - * PPP compression stuff - */ - - -/* Push an empty CCP Data Frame up to the daemon to wake it up and let it - generate a CCP Reset-Request or tear down CCP altogether */ - -static void isdn_ppp_ccp_kickup(struct ippp_struct *is) -{ - isdn_ppp_fill_rq(NULL, 0, PPP_COMP, is->lp->ppp_slot); -} - -/* In-kernel handling of CCP Reset-Request and Reset-Ack is necessary, - but absolutely nontrivial. The most abstruse problem we are facing is - that the generation, reception and all the handling of timeouts and - resends including proper request id management should be entirely left - to the (de)compressor, but indeed is not covered by the current API to - the (de)compressor. The API is a prototype version from PPP where only - some (de)compressors have yet been implemented and all of them are - rather simple in their reset handling. Especially, their is only one - outstanding ResetAck at a time with all of them and ResetReq/-Acks do - not have parameters. For this very special case it was sufficient to - just return an error code from the decompressor and have a single - reset() entry to communicate all the necessary information between - the framework and the (de)compressor. Bad enough, LZS is different - (and any other compressor may be different, too). It has multiple - histories (eventually) and needs to Reset each of them independently - and thus uses multiple outstanding Acks and history numbers as an - additional parameter to Reqs/Acks. - All that makes it harder to port the reset state engine into the - kernel because it is not just the same simple one as in (i)pppd but - it must be able to pass additional parameters and have multiple out- - standing Acks. We are trying to achieve the impossible by handling - reset transactions independent by their id. The id MUST change when - the data portion changes, thus any (de)compressor who uses more than - one resettable state must provide and recognize individual ids for - each individual reset transaction. The framework itself does _only_ - differentiate them by id, because it has no other semantics like the - (de)compressor might. - This looks like a major redesign of the interface would be nice, - but I don't have an idea how to do it better. */ - -/* Send a CCP Reset-Request or Reset-Ack directly from the kernel. This is - getting that lengthy because there is no simple "send-this-frame-out" - function above but every wrapper does a bit different. Hope I guess - correct in this hack... */ - -static void isdn_ppp_ccp_xmit_reset(struct ippp_struct *is, int proto, - unsigned char code, unsigned char id, - unsigned char *data, int len) -{ - struct sk_buff *skb; - unsigned char *p; - int hl; - int cnt = 0; - isdn_net_local *lp = is->lp; - - /* Alloc large enough skb */ - hl = dev->drv[lp->isdn_device]->interface->hl_hdrlen; - skb = alloc_skb(len + hl + 16, GFP_ATOMIC); - if (!skb) { - printk(KERN_WARNING - "ippp: CCP cannot send reset - out of memory\n"); - return; - } - skb_reserve(skb, hl); - - /* We may need to stuff an address and control field first */ - if (!(is->pppcfg & SC_COMP_AC)) { - p = skb_put(skb, 2); - *p++ = 0xff; - *p++ = 0x03; - } - - /* Stuff proto, code, id and length */ - p = skb_put(skb, 6); - *p++ = (proto >> 8); - *p++ = (proto & 0xff); - *p++ = code; - *p++ = id; - cnt = 4 + len; - *p++ = (cnt >> 8); - *p++ = (cnt & 0xff); - - /* Now stuff remaining bytes */ - if (len) { - skb_put_data(skb, data, len); - } - - /* skb is now ready for xmit */ - printk(KERN_DEBUG "Sending CCP Frame:\n"); - isdn_ppp_frame_log("ccp-xmit", skb->data, skb->len, 32, is->unit, lp->ppp_slot); - - isdn_net_write_super(lp, skb); -} - -/* Allocate the reset state vector */ -static struct ippp_ccp_reset *isdn_ppp_ccp_reset_alloc(struct ippp_struct *is) -{ - struct ippp_ccp_reset *r; - r = kzalloc(sizeof(struct ippp_ccp_reset), GFP_KERNEL); - if (!r) { - printk(KERN_ERR "ippp_ccp: failed to allocate reset data" - " structure - no mem\n"); - return NULL; - } - printk(KERN_DEBUG "ippp_ccp: allocated reset data structure %p\n", r); - is->reset = r; - return r; -} - -/* Destroy the reset state vector. Kill all pending timers first. */ -static void isdn_ppp_ccp_reset_free(struct ippp_struct *is) -{ - unsigned int id; - - printk(KERN_DEBUG "ippp_ccp: freeing reset data structure %p\n", - is->reset); - for (id = 0; id < 256; id++) { - if (is->reset->rs[id]) { - isdn_ppp_ccp_reset_free_state(is, (unsigned char)id); - } - } - kfree(is->reset); - is->reset = NULL; -} - -/* Free a given state and clear everything up for later reallocation */ -static void isdn_ppp_ccp_reset_free_state(struct ippp_struct *is, - unsigned char id) -{ - struct ippp_ccp_reset_state *rs; - - if (is->reset->rs[id]) { - printk(KERN_DEBUG "ippp_ccp: freeing state for id %d\n", id); - rs = is->reset->rs[id]; - /* Make sure the kernel will not call back later */ - if (rs->ta) - del_timer(&rs->timer); - is->reset->rs[id] = NULL; - kfree(rs); - } else { - printk(KERN_WARNING "ippp_ccp: id %d is not allocated\n", id); - } -} - -/* The timer callback function which is called when a ResetReq has timed out, - aka has never been answered by a ResetAck */ -static void isdn_ppp_ccp_timer_callback(struct timer_list *t) -{ - struct ippp_ccp_reset_state *rs = - from_timer(rs, t, timer); - - if (!rs) { - printk(KERN_ERR "ippp_ccp: timer cb with zero closure.\n"); - return; - } - if (rs->ta && rs->state == CCPResetSentReq) { - /* We are correct here */ - if (!rs->expra) { - /* Hmm, there is no Ack really expected. We can clean - up the state now, it will be reallocated if the - decompressor insists on another reset */ - rs->ta = 0; - isdn_ppp_ccp_reset_free_state(rs->is, rs->id); - return; - } - printk(KERN_DEBUG "ippp_ccp: CCP Reset timed out for id %d\n", - rs->id); - /* Push it again */ - isdn_ppp_ccp_xmit_reset(rs->is, PPP_CCP, CCP_RESETREQ, rs->id, - rs->data, rs->dlen); - /* Restart timer */ - rs->timer.expires = jiffies + HZ * 5; - add_timer(&rs->timer); - } else { - printk(KERN_WARNING "ippp_ccp: timer cb in wrong state %d\n", - rs->state); - } -} - -/* Allocate a new reset transaction state */ -static struct ippp_ccp_reset_state *isdn_ppp_ccp_reset_alloc_state(struct ippp_struct *is, - unsigned char id) -{ - struct ippp_ccp_reset_state *rs; - if (is->reset->rs[id]) { - printk(KERN_WARNING "ippp_ccp: old state exists for id %d\n", - id); - return NULL; - } else { - rs = kzalloc(sizeof(struct ippp_ccp_reset_state), GFP_ATOMIC); - if (!rs) - return NULL; - rs->state = CCPResetIdle; - rs->is = is; - rs->id = id; - timer_setup(&rs->timer, isdn_ppp_ccp_timer_callback, 0); - is->reset->rs[id] = rs; - } - return rs; -} - - -/* A decompressor wants a reset with a set of parameters - do what is - necessary to fulfill it */ -static void isdn_ppp_ccp_reset_trans(struct ippp_struct *is, - struct isdn_ppp_resetparams *rp) -{ - struct ippp_ccp_reset_state *rs; - - if (rp->valid) { - /* The decompressor defines parameters by itself */ - if (rp->rsend) { - /* And he wants us to send a request */ - if (!(rp->idval)) { - printk(KERN_ERR "ippp_ccp: decompressor must" - " specify reset id\n"); - return; - } - if (is->reset->rs[rp->id]) { - /* There is already a transaction in existence - for this id. May be still waiting for a - Ack or may be wrong. */ - rs = is->reset->rs[rp->id]; - if (rs->state == CCPResetSentReq && rs->ta) { - printk(KERN_DEBUG "ippp_ccp: reset" - " trans still in progress" - " for id %d\n", rp->id); - } else { - printk(KERN_WARNING "ippp_ccp: reset" - " trans in wrong state %d for" - " id %d\n", rs->state, rp->id); - } - } else { - /* Ok, this is a new transaction */ - printk(KERN_DEBUG "ippp_ccp: new trans for id" - " %d to be started\n", rp->id); - rs = isdn_ppp_ccp_reset_alloc_state(is, rp->id); - if (!rs) { - printk(KERN_ERR "ippp_ccp: out of mem" - " allocing ccp trans\n"); - return; - } - rs->state = CCPResetSentReq; - rs->expra = rp->expra; - if (rp->dtval) { - rs->dlen = rp->dlen; - memcpy(rs->data, rp->data, rp->dlen); - } - /* HACK TODO - add link comp here */ - isdn_ppp_ccp_xmit_reset(is, PPP_CCP, - CCP_RESETREQ, rs->id, - rs->data, rs->dlen); - /* Start the timer */ - rs->timer.expires = jiffies + 5 * HZ; - add_timer(&rs->timer); - rs->ta = 1; - } - } else { - printk(KERN_DEBUG "ippp_ccp: no reset sent\n"); - } - } else { - /* The reset params are invalid. The decompressor does not - care about them, so we just send the minimal requests - and increase ids only when an Ack is received for a - given id */ - if (is->reset->rs[is->reset->lastid]) { - /* There is already a transaction in existence - for this id. May be still waiting for a - Ack or may be wrong. */ - rs = is->reset->rs[is->reset->lastid]; - if (rs->state == CCPResetSentReq && rs->ta) { - printk(KERN_DEBUG "ippp_ccp: reset" - " trans still in progress" - " for id %d\n", rp->id); - } else { - printk(KERN_WARNING "ippp_ccp: reset" - " trans in wrong state %d for" - " id %d\n", rs->state, rp->id); - } - } else { - printk(KERN_DEBUG "ippp_ccp: new trans for id" - " %d to be started\n", is->reset->lastid); - rs = isdn_ppp_ccp_reset_alloc_state(is, - is->reset->lastid); - if (!rs) { - printk(KERN_ERR "ippp_ccp: out of mem" - " allocing ccp trans\n"); - return; - } - rs->state = CCPResetSentReq; - /* We always expect an Ack if the decompressor doesn't - know better */ - rs->expra = 1; - rs->dlen = 0; - /* HACK TODO - add link comp here */ - isdn_ppp_ccp_xmit_reset(is, PPP_CCP, CCP_RESETREQ, - rs->id, NULL, 0); - /* Start the timer */ - rs->timer.expires = jiffies + 5 * HZ; - add_timer(&rs->timer); - rs->ta = 1; - } - } -} - -/* An Ack was received for this id. This means we stop the timer and clean - up the state prior to calling the decompressors reset routine. */ -static void isdn_ppp_ccp_reset_ack_rcvd(struct ippp_struct *is, - unsigned char id) -{ - struct ippp_ccp_reset_state *rs = is->reset->rs[id]; - - if (rs) { - if (rs->ta && rs->state == CCPResetSentReq) { - /* Great, we are correct */ - if (!rs->expra) - printk(KERN_DEBUG "ippp_ccp: ResetAck received" - " for id %d but not expected\n", id); - } else { - printk(KERN_INFO "ippp_ccp: ResetAck received out of" - "sync for id %d\n", id); - } - if (rs->ta) { - rs->ta = 0; - del_timer(&rs->timer); - } - isdn_ppp_ccp_reset_free_state(is, id); - } else { - printk(KERN_INFO "ippp_ccp: ResetAck received for unknown id" - " %d\n", id); - } - /* Make sure the simple reset stuff uses a new id next time */ - is->reset->lastid++; -} - -/* - * decompress packet - * - * if master = 0, we're trying to uncompress an per-link compressed packet, - * as opposed to an compressed reconstructed-from-MPPP packet. - * proto is updated to protocol field of uncompressed packet. - * - * retval: decompressed packet, - * same packet if uncompressed, - * NULL if decompression error - */ - -static struct sk_buff *isdn_ppp_decompress(struct sk_buff *skb, struct ippp_struct *is, struct ippp_struct *master, - int *proto) -{ - void *stat = NULL; - struct isdn_ppp_compressor *ipc = NULL; - struct sk_buff *skb_out; - int len; - struct ippp_struct *ri; - struct isdn_ppp_resetparams rsparm; - unsigned char rsdata[IPPP_RESET_MAXDATABYTES]; - - if (!master) { - // per-link decompression - stat = is->link_decomp_stat; - ipc = is->link_decompressor; - ri = is; - } else { - stat = master->decomp_stat; - ipc = master->decompressor; - ri = master; - } - - if (!ipc) { - // no decompressor -> we can't decompress. - printk(KERN_DEBUG "ippp: no decompressor defined!\n"); - return skb; - } - BUG_ON(!stat); // if we have a compressor, stat has been set as well - - if ((master && *proto == PPP_COMP) || (!master && *proto == PPP_COMPFRAG)) { - // compressed packets are compressed by their protocol type - - // Set up reset params for the decompressor - memset(&rsparm, 0, sizeof(rsparm)); - rsparm.data = rsdata; - rsparm.maxdlen = IPPP_RESET_MAXDATABYTES; - - skb_out = dev_alloc_skb(is->mru + PPP_HDRLEN); - if (!skb_out) { - kfree_skb(skb); - printk(KERN_ERR "ippp: decomp memory allocation failure\n"); - return NULL; - } - len = ipc->decompress(stat, skb, skb_out, &rsparm); - kfree_skb(skb); - if (len <= 0) { - switch (len) { - case DECOMP_ERROR: - printk(KERN_INFO "ippp: decomp wants reset %s params\n", - rsparm.valid ? "with" : "without"); - - isdn_ppp_ccp_reset_trans(ri, &rsparm); - break; - case DECOMP_FATALERROR: - ri->pppcfg |= SC_DC_FERROR; - /* Kick ipppd to recognize the error */ - isdn_ppp_ccp_kickup(ri); - break; - } - kfree_skb(skb_out); - return NULL; - } - *proto = isdn_ppp_strip_proto(skb_out); - if (*proto < 0) { - kfree_skb(skb_out); - return NULL; - } - return skb_out; - } else { - // uncompressed packets are fed through the decompressor to - // update the decompressor state - ipc->incomp(stat, skb, *proto); - return skb; - } -} - -/* - * compress a frame - * type=0: normal/bundle compression - * =1: link compression - * returns original skb if we haven't compressed the frame - * and a new skb pointer if we've done it - */ -static struct sk_buff *isdn_ppp_compress(struct sk_buff *skb_in, int *proto, - struct ippp_struct *is, struct ippp_struct *master, int type) -{ - int ret; - int new_proto; - struct isdn_ppp_compressor *compressor; - void *stat; - struct sk_buff *skb_out; - - /* we do not compress control protocols */ - if (*proto < 0 || *proto > 0x3fff) { - return skb_in; - } - - if (type) { /* type=1 => Link compression */ - return skb_in; - } - else { - if (!master) { - compressor = is->compressor; - stat = is->comp_stat; - } - else { - compressor = master->compressor; - stat = master->comp_stat; - } - new_proto = PPP_COMP; - } - - if (!compressor) { - printk(KERN_ERR "isdn_ppp: No compressor set!\n"); - return skb_in; - } - if (!stat) { - printk(KERN_ERR "isdn_ppp: Compressor not initialized?\n"); - return skb_in; - } - - /* Allow for at least 150 % expansion (for now) */ - skb_out = alloc_skb(skb_in->len + skb_in->len / 2 + 32 + - skb_headroom(skb_in), GFP_ATOMIC); - if (!skb_out) - return skb_in; - skb_reserve(skb_out, skb_headroom(skb_in)); - - ret = (compressor->compress)(stat, skb_in, skb_out, *proto); - if (!ret) { - dev_kfree_skb(skb_out); - return skb_in; - } - - dev_kfree_skb(skb_in); - *proto = new_proto; - return skb_out; -} - -/* - * we received a CCP frame .. - * not a clean solution, but we MUST handle a few cases in the kernel - */ -static void isdn_ppp_receive_ccp(isdn_net_dev *net_dev, isdn_net_local *lp, - struct sk_buff *skb, int proto) -{ - struct ippp_struct *is; - struct ippp_struct *mis; - int len; - struct isdn_ppp_resetparams rsparm; - unsigned char rsdata[IPPP_RESET_MAXDATABYTES]; - - printk(KERN_DEBUG "Received CCP frame from peer slot(%d)\n", - lp->ppp_slot); - if (lp->ppp_slot < 0 || lp->ppp_slot >= ISDN_MAX_CHANNELS) { - printk(KERN_ERR "%s: lp->ppp_slot(%d) out of range\n", - __func__, lp->ppp_slot); - return; - } - is = ippp_table[lp->ppp_slot]; - isdn_ppp_frame_log("ccp-rcv", skb->data, skb->len, 32, is->unit, lp->ppp_slot); - - if (lp->master) { - int slot = ISDN_MASTER_PRIV(lp)->ppp_slot; - if (slot < 0 || slot >= ISDN_MAX_CHANNELS) { - printk(KERN_ERR "%s: slot(%d) out of range\n", - __func__, slot); - return; - } - mis = ippp_table[slot]; - } else - mis = is; - - switch (skb->data[0]) { - case CCP_CONFREQ: - if (is->debug & 0x10) - printk(KERN_DEBUG "Disable compression here!\n"); - if (proto == PPP_CCP) - mis->compflags &= ~SC_COMP_ON; - else - is->compflags &= ~SC_LINK_COMP_ON; - break; - case CCP_TERMREQ: - case CCP_TERMACK: - if (is->debug & 0x10) - printk(KERN_DEBUG "Disable (de)compression here!\n"); - if (proto == PPP_CCP) - mis->compflags &= ~(SC_DECOMP_ON | SC_COMP_ON); - else - is->compflags &= ~(SC_LINK_DECOMP_ON | SC_LINK_COMP_ON); - break; - case CCP_CONFACK: - /* if we RECEIVE an ackowledge we enable the decompressor */ - if (is->debug & 0x10) - printk(KERN_DEBUG "Enable decompression here!\n"); - if (proto == PPP_CCP) { - if (!mis->decompressor) - break; - mis->compflags |= SC_DECOMP_ON; - } else { - if (!is->decompressor) - break; - is->compflags |= SC_LINK_DECOMP_ON; - } - break; - - case CCP_RESETACK: - printk(KERN_DEBUG "Received ResetAck from peer\n"); - len = (skb->data[2] << 8) | skb->data[3]; - len -= 4; - - if (proto == PPP_CCP) { - /* If a reset Ack was outstanding for this id, then - clean up the state engine */ - isdn_ppp_ccp_reset_ack_rcvd(mis, skb->data[1]); - if (mis->decompressor && mis->decomp_stat) - mis->decompressor-> - reset(mis->decomp_stat, - skb->data[0], - skb->data[1], - len ? &skb->data[4] : NULL, - len, NULL); - /* TODO: This is not easy to decide here */ - mis->compflags &= ~SC_DECOMP_DISCARD; - } - else { - isdn_ppp_ccp_reset_ack_rcvd(is, skb->data[1]); - if (is->link_decompressor && is->link_decomp_stat) - is->link_decompressor-> - reset(is->link_decomp_stat, - skb->data[0], - skb->data[1], - len ? &skb->data[4] : NULL, - len, NULL); - /* TODO: neither here */ - is->compflags &= ~SC_LINK_DECOMP_DISCARD; - } - break; - - case CCP_RESETREQ: - printk(KERN_DEBUG "Received ResetReq from peer\n"); - /* Receiving a ResetReq means we must reset our compressor */ - /* Set up reset params for the reset entry */ - memset(&rsparm, 0, sizeof(rsparm)); - rsparm.data = rsdata; - rsparm.maxdlen = IPPP_RESET_MAXDATABYTES; - /* Isolate data length */ - len = (skb->data[2] << 8) | skb->data[3]; - len -= 4; - if (proto == PPP_CCP) { - if (mis->compressor && mis->comp_stat) - mis->compressor-> - reset(mis->comp_stat, - skb->data[0], - skb->data[1], - len ? &skb->data[4] : NULL, - len, &rsparm); - } - else { - if (is->link_compressor && is->link_comp_stat) - is->link_compressor-> - reset(is->link_comp_stat, - skb->data[0], - skb->data[1], - len ? &skb->data[4] : NULL, - len, &rsparm); - } - /* Ack the Req as specified by rsparm */ - if (rsparm.valid) { - /* Compressor reset handler decided how to answer */ - if (rsparm.rsend) { - /* We should send a Frame */ - isdn_ppp_ccp_xmit_reset(is, proto, CCP_RESETACK, - rsparm.idval ? rsparm.id - : skb->data[1], - rsparm.dtval ? - rsparm.data : NULL, - rsparm.dtval ? - rsparm.dlen : 0); - } else { - printk(KERN_DEBUG "ResetAck suppressed\n"); - } - } else { - /* We answer with a straight reflected Ack */ - isdn_ppp_ccp_xmit_reset(is, proto, CCP_RESETACK, - skb->data[1], - len ? &skb->data[4] : NULL, - len); - } - break; - } -} - - -/* - * Daemon sends a CCP frame ... - */ - -/* TODO: Clean this up with new Reset semantics */ - -/* I believe the CCP handling as-is is done wrong. Compressed frames - * should only be sent/received after CCP reaches UP state, which means - * both sides have sent CONF_ACK. Currently, we handle both directions - * independently, which means we may accept compressed frames too early - * (supposedly not a problem), but may also mean we send compressed frames - * too early, which may turn out to be a problem. - * This part of state machine should actually be handled by (i)pppd, but - * that's too big of a change now. --kai - */ - -/* Actually, we might turn this into an advantage: deal with the RFC in - * the old tradition of beeing generous on what we accept, but beeing - * strict on what we send. Thus we should just - * - accept compressed frames as soon as decompression is negotiated - * - send compressed frames only when decomp *and* comp are negotiated - * - drop rx compressed frames if we cannot decomp (instead of pushing them - * up to ipppd) - * and I tried to modify this file according to that. --abp - */ - -static void isdn_ppp_send_ccp(isdn_net_dev *net_dev, isdn_net_local *lp, struct sk_buff *skb) -{ - struct ippp_struct *mis, *is; - int proto, slot = lp->ppp_slot; - unsigned char *data; - - if (!skb || skb->len < 3) - return; - if (slot < 0 || slot >= ISDN_MAX_CHANNELS) { - printk(KERN_ERR "%s: lp->ppp_slot(%d) out of range\n", - __func__, slot); - return; - } - is = ippp_table[slot]; - /* Daemon may send with or without address and control field comp */ - data = skb->data; - if (!(is->pppcfg & SC_COMP_AC) && data[0] == 0xff && data[1] == 0x03) { - data += 2; - if (skb->len < 5) - return; - } - - proto = ((int)data[0]<<8) + data[1]; - if (proto != PPP_CCP && proto != PPP_CCPFRAG) - return; - - printk(KERN_DEBUG "Received CCP frame from daemon:\n"); - isdn_ppp_frame_log("ccp-xmit", skb->data, skb->len, 32, is->unit, lp->ppp_slot); - - if (lp->master) { - slot = ISDN_MASTER_PRIV(lp)->ppp_slot; - if (slot < 0 || slot >= ISDN_MAX_CHANNELS) { - printk(KERN_ERR "%s: slot(%d) out of range\n", - __func__, slot); - return; - } - mis = ippp_table[slot]; - } else - mis = is; - if (mis != is) - printk(KERN_DEBUG "isdn_ppp: Ouch! Master CCP sends on slave slot!\n"); - - switch (data[2]) { - case CCP_CONFREQ: - if (is->debug & 0x10) - printk(KERN_DEBUG "Disable decompression here!\n"); - if (proto == PPP_CCP) - is->compflags &= ~SC_DECOMP_ON; - else - is->compflags &= ~SC_LINK_DECOMP_ON; - break; - case CCP_TERMREQ: - case CCP_TERMACK: - if (is->debug & 0x10) - printk(KERN_DEBUG "Disable (de)compression here!\n"); - if (proto == PPP_CCP) - is->compflags &= ~(SC_DECOMP_ON | SC_COMP_ON); - else - is->compflags &= ~(SC_LINK_DECOMP_ON | SC_LINK_COMP_ON); - break; - case CCP_CONFACK: - /* if we SEND an ackowledge we can/must enable the compressor */ - if (is->debug & 0x10) - printk(KERN_DEBUG "Enable compression here!\n"); - if (proto == PPP_CCP) { - if (!is->compressor) - break; - is->compflags |= SC_COMP_ON; - } else { - if (!is->compressor) - break; - is->compflags |= SC_LINK_COMP_ON; - } - break; - case CCP_RESETACK: - /* If we send a ACK we should reset our compressor */ - if (is->debug & 0x10) - printk(KERN_DEBUG "Reset decompression state here!\n"); - printk(KERN_DEBUG "ResetAck from daemon passed by\n"); - if (proto == PPP_CCP) { - /* link to master? */ - if (is->compressor && is->comp_stat) - is->compressor->reset(is->comp_stat, 0, 0, - NULL, 0, NULL); - is->compflags &= ~SC_COMP_DISCARD; - } - else { - if (is->link_compressor && is->link_comp_stat) - is->link_compressor->reset(is->link_comp_stat, - 0, 0, NULL, 0, NULL); - is->compflags &= ~SC_LINK_COMP_DISCARD; - } - break; - case CCP_RESETREQ: - /* Just let it pass by */ - printk(KERN_DEBUG "ResetReq from daemon passed by\n"); - break; - } -} - -int isdn_ppp_register_compressor(struct isdn_ppp_compressor *ipc) -{ - ipc->next = ipc_head; - ipc->prev = NULL; - if (ipc_head) { - ipc_head->prev = ipc; - } - ipc_head = ipc; - return 0; -} - -int isdn_ppp_unregister_compressor(struct isdn_ppp_compressor *ipc) -{ - if (ipc->prev) - ipc->prev->next = ipc->next; - else - ipc_head = ipc->next; - if (ipc->next) - ipc->next->prev = ipc->prev; - ipc->prev = ipc->next = NULL; - return 0; -} - -static int isdn_ppp_set_compressor(struct ippp_struct *is, struct isdn_ppp_comp_data *data) -{ - struct isdn_ppp_compressor *ipc = ipc_head; - int ret; - void *stat; - int num = data->num; - - if (is->debug & 0x10) - printk(KERN_DEBUG "[%d] Set %s type %d\n", is->unit, - (data->flags & IPPP_COMP_FLAG_XMIT) ? "compressor" : "decompressor", num); - - /* If is has no valid reset state vector, we cannot allocate a - decompressor. The decompressor would cause reset transactions - sooner or later, and they need that vector. */ - - if (!(data->flags & IPPP_COMP_FLAG_XMIT) && !is->reset) { - printk(KERN_ERR "ippp_ccp: no reset data structure - can't" - " allow decompression.\n"); - return -ENOMEM; - } - - while (ipc) { - if (ipc->num == num) { - stat = ipc->alloc(data); - if (stat) { - ret = ipc->init(stat, data, is->unit, 0); - if (!ret) { - printk(KERN_ERR "Can't init (de)compression!\n"); - ipc->free(stat); - stat = NULL; - break; - } - } - else { - printk(KERN_ERR "Can't alloc (de)compression!\n"); - break; - } - - if (data->flags & IPPP_COMP_FLAG_XMIT) { - if (data->flags & IPPP_COMP_FLAG_LINK) { - if (is->link_comp_stat) - is->link_compressor->free(is->link_comp_stat); - is->link_comp_stat = stat; - is->link_compressor = ipc; - } - else { - if (is->comp_stat) - is->compressor->free(is->comp_stat); - is->comp_stat = stat; - is->compressor = ipc; - } - } - else { - if (data->flags & IPPP_COMP_FLAG_LINK) { - if (is->link_decomp_stat) - is->link_decompressor->free(is->link_decomp_stat); - is->link_decomp_stat = stat; - is->link_decompressor = ipc; - } - else { - if (is->decomp_stat) - is->decompressor->free(is->decomp_stat); - is->decomp_stat = stat; - is->decompressor = ipc; - } - } - return 0; - } - ipc = ipc->next; - } - return -EINVAL; -} diff --git a/drivers/isdn/i4l/isdn_ppp.h b/drivers/isdn/i4l/isdn_ppp.h deleted file mode 100644 index 34b8a2ce84f3..000000000000 --- a/drivers/isdn/i4l/isdn_ppp.h +++ /dev/null @@ -1,41 +0,0 @@ -/* $Id: isdn_ppp.h,v 1.1.2.2 2004/01/12 22:37:19 keil Exp $ - * - * header for Linux ISDN subsystem, functions for synchronous PPP (linklevel). - * - * Copyright 1995,96 by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#include /* for PPP_PROTOCOL */ -#include /* for isdn_ppp info */ - -extern int isdn_ppp_read(int, struct file *, char __user *, int); -extern int isdn_ppp_write(int, struct file *, const char __user *, int); -extern int isdn_ppp_open(int, struct file *); -extern int isdn_ppp_init(void); -extern void isdn_ppp_cleanup(void); -extern int isdn_ppp_free(isdn_net_local *); -extern int isdn_ppp_bind(isdn_net_local *); -extern int isdn_ppp_autodial_filter(struct sk_buff *, isdn_net_local *); -extern int isdn_ppp_xmit(struct sk_buff *, struct net_device *); -extern void isdn_ppp_receive(isdn_net_dev *, isdn_net_local *, struct sk_buff *); -extern int isdn_ppp_dev_ioctl(struct net_device *, struct ifreq *, int); -extern __poll_t isdn_ppp_poll(struct file *, struct poll_table_struct *); -extern int isdn_ppp_ioctl(int, struct file *, unsigned int, unsigned long); -extern void isdn_ppp_release(int, struct file *); -extern int isdn_ppp_dial_slave(char *); -extern void isdn_ppp_wakeup_daemon(isdn_net_local *); - -extern int isdn_ppp_register_compressor(struct isdn_ppp_compressor *ipc); -extern int isdn_ppp_unregister_compressor(struct isdn_ppp_compressor *ipc); - -#define IPPP_OPEN 0x01 -#define IPPP_CONNECT 0x02 -#define IPPP_CLOSEWAIT 0x04 -#define IPPP_NOBLOCK 0x08 -#define IPPP_ASSIGNED 0x10 - -#define IPPP_MAX_HEADER 10 diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c deleted file mode 100644 index 43700fc19a31..000000000000 --- a/drivers/isdn/i4l/isdn_tty.c +++ /dev/null @@ -1,3756 +0,0 @@ -/* - * Linux ISDN subsystem, tty functions and AT-command emulator (linklevel). - * - * Copyright 1994-1999 by Fritz Elfert (fritz@isdn4linux.de) - * Copyright 1995,96 by Thinking Objects Software GmbH Wuerzburg - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ -#undef ISDN_TTY_STAT_DEBUG - -#include -#include /* ASYNC_* flags */ -#include -#include -#include -#include -#include "isdn_common.h" -#include "isdn_tty.h" -#ifdef CONFIG_ISDN_AUDIO -#include "isdn_audio.h" -#define VBUF 0x3e0 -#define VBUFX (VBUF/16) -#endif - -#define FIX_FILE_TRANSFER -#define DUMMY_HAYES_AT - -/* Prototypes */ - -static DEFINE_MUTEX(modem_info_mutex); -static int isdn_tty_edit_at(const char *, int, modem_info *); -static void isdn_tty_check_esc(const u_char *, u_char, int, int *, u_long *); -static void isdn_tty_modem_reset_regs(modem_info *, int); -static void isdn_tty_cmd_ATA(modem_info *); -static void isdn_tty_flush_buffer(struct tty_struct *); -static void isdn_tty_modem_result(int, modem_info *); -#ifdef CONFIG_ISDN_AUDIO -static int isdn_tty_countDLE(unsigned char *, int); -#endif - -/* Leave this unchanged unless you know what you do! */ -#define MODEM_PARANOIA_CHECK -#define MODEM_DO_RESTART - -static int bit2si[8] = -{1, 5, 7, 7, 7, 7, 7, 7}; -static int si2bit[8] = -{4, 1, 4, 4, 4, 4, 4, 4}; - -/* isdn_tty_try_read() is called from within isdn_tty_rcv_skb() - * to stuff incoming data directly into a tty's flip-buffer. This - * is done to speed up tty-receiving if the receive-queue is empty. - * This routine MUST be called with interrupts off. - * Return: - * 1 = Success - * 0 = Failure, data has to be buffered and later processed by - * isdn_tty_readmodem(). - */ -static int -isdn_tty_try_read(modem_info *info, struct sk_buff *skb) -{ - struct tty_port *port = &info->port; - int c; - int len; - char last; - - if (!info->online) - return 0; - - if (!(info->mcr & UART_MCR_RTS)) - return 0; - - len = skb->len -#ifdef CONFIG_ISDN_AUDIO - + ISDN_AUDIO_SKB_DLECOUNT(skb) -#endif - ; - - c = tty_buffer_request_room(port, len); - if (c < len) - return 0; - -#ifdef CONFIG_ISDN_AUDIO - if (ISDN_AUDIO_SKB_DLECOUNT(skb)) { - int l = skb->len; - unsigned char *dp = skb->data; - while (--l) { - if (*dp == DLE) - tty_insert_flip_char(port, DLE, 0); - tty_insert_flip_char(port, *dp++, 0); - } - if (*dp == DLE) - tty_insert_flip_char(port, DLE, 0); - last = *dp; - } else { -#endif - if (len > 1) - tty_insert_flip_string(port, skb->data, len - 1); - last = skb->data[len - 1]; -#ifdef CONFIG_ISDN_AUDIO - } -#endif - if (info->emu.mdmreg[REG_CPPP] & BIT_CPPP) - tty_insert_flip_char(port, last, 0xFF); - else - tty_insert_flip_char(port, last, TTY_NORMAL); - tty_flip_buffer_push(port); - kfree_skb(skb); - - return 1; -} - -/* isdn_tty_readmodem() is called periodically from within timer-interrupt. - * It tries getting received data from the receive queue an stuff it into - * the tty's flip-buffer. - */ -void -isdn_tty_readmodem(void) -{ - int resched = 0; - int midx; - int i; - int r; - modem_info *info; - - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - midx = dev->m_idx[i]; - if (midx < 0) - continue; - - info = &dev->mdm.info[midx]; - if (!info->online) - continue; - - r = 0; -#ifdef CONFIG_ISDN_AUDIO - isdn_audio_eval_dtmf(info); - if ((info->vonline & 1) && (info->emu.vpar[1])) - isdn_audio_eval_silence(info); -#endif - if (info->mcr & UART_MCR_RTS) { - /* CISCO AsyncPPP Hack */ - if (!(info->emu.mdmreg[REG_CPPP] & BIT_CPPP)) - r = isdn_readbchan_tty(info->isdn_driver, - info->isdn_channel, - &info->port, 0); - else - r = isdn_readbchan_tty(info->isdn_driver, - info->isdn_channel, - &info->port, 1); - if (r) - tty_flip_buffer_push(&info->port); - } else - r = 1; - - if (r) { - info->rcvsched = 0; - resched = 1; - } else - info->rcvsched = 1; - } - if (!resched) - isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 0); -} - -int -isdn_tty_rcv_skb(int i, int di, int channel, struct sk_buff *skb) -{ - ulong flags; - int midx; -#ifdef CONFIG_ISDN_AUDIO - int ifmt; -#endif - modem_info *info; - - if ((midx = dev->m_idx[i]) < 0) { - /* if midx is invalid, packet is not for tty */ - return 0; - } - info = &dev->mdm.info[midx]; -#ifdef CONFIG_ISDN_AUDIO - ifmt = 1; - - if ((info->vonline) && (!info->emu.vpar[4])) - isdn_audio_calc_dtmf(info, skb->data, skb->len, ifmt); - if ((info->vonline & 1) && (info->emu.vpar[1])) - isdn_audio_calc_silence(info, skb->data, skb->len, ifmt); -#endif - if ((info->online < 2) -#ifdef CONFIG_ISDN_AUDIO - && (!(info->vonline & 1)) -#endif - ) { - /* If Modem not listening, drop data */ - kfree_skb(skb); - return 1; - } - if (info->emu.mdmreg[REG_T70] & BIT_T70) { - if (info->emu.mdmreg[REG_T70] & BIT_T70_EXT) { - /* T.70 decoding: throw away the T.70 header (2 or 4 bytes) */ - if (skb->data[0] == 3) /* pure data packet -> 4 byte headers */ - skb_pull(skb, 4); - else - if (skb->data[0] == 1) /* keepalive packet -> 2 byte hdr */ - skb_pull(skb, 2); - } else - /* T.70 decoding: Simply throw away the T.70 header (4 bytes) */ - if ((skb->data[0] == 1) && ((skb->data[1] == 0) || (skb->data[1] == 1))) - skb_pull(skb, 4); - } -#ifdef CONFIG_ISDN_AUDIO - ISDN_AUDIO_SKB_DLECOUNT(skb) = 0; - ISDN_AUDIO_SKB_LOCK(skb) = 0; - if (info->vonline & 1) { - /* voice conversion/compression */ - switch (info->emu.vpar[3]) { - case 2: - case 3: - case 4: - /* adpcm - * Since compressed data takes less - * space, we can overwrite the buffer. - */ - skb_trim(skb, isdn_audio_xlaw2adpcm(info->adpcmr, - ifmt, - skb->data, - skb->data, - skb->len)); - break; - case 5: - /* a-law */ - if (!ifmt) - isdn_audio_ulaw2alaw(skb->data, skb->len); - break; - case 6: - /* u-law */ - if (ifmt) - isdn_audio_alaw2ulaw(skb->data, skb->len); - break; - } - ISDN_AUDIO_SKB_DLECOUNT(skb) = - isdn_tty_countDLE(skb->data, skb->len); - } -#ifdef CONFIG_ISDN_TTY_FAX - else { - if (info->faxonline & 2) { - isdn_tty_fax_bitorder(info, skb); - ISDN_AUDIO_SKB_DLECOUNT(skb) = - isdn_tty_countDLE(skb->data, skb->len); - } - } -#endif -#endif - /* Try to deliver directly via tty-buf if queue is empty */ - spin_lock_irqsave(&info->readlock, flags); - if (skb_queue_empty(&dev->drv[di]->rpqueue[channel])) - if (isdn_tty_try_read(info, skb)) { - spin_unlock_irqrestore(&info->readlock, flags); - return 1; - } - /* Direct deliver failed or queue wasn't empty. - * Queue up for later dequeueing via timer-irq. - */ - __skb_queue_tail(&dev->drv[di]->rpqueue[channel], skb); - dev->drv[di]->rcvcount[channel] += - (skb->len -#ifdef CONFIG_ISDN_AUDIO - + ISDN_AUDIO_SKB_DLECOUNT(skb) -#endif - ); - spin_unlock_irqrestore(&info->readlock, flags); - /* Schedule dequeuing */ - if ((dev->modempoll) && (info->rcvsched)) - isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1); - return 1; -} - -static void -isdn_tty_cleanup_xmit(modem_info *info) -{ - skb_queue_purge(&info->xmit_queue); -#ifdef CONFIG_ISDN_AUDIO - skb_queue_purge(&info->dtmf_queue); -#endif -} - -static void -isdn_tty_tint(modem_info *info) -{ - struct sk_buff *skb = skb_dequeue(&info->xmit_queue); - int len, slen; - - if (!skb) - return; - len = skb->len; - if ((slen = isdn_writebuf_skb_stub(info->isdn_driver, - info->isdn_channel, 1, skb)) == len) { - struct tty_struct *tty = info->port.tty; - info->send_outstanding++; - info->msr &= ~UART_MSR_CTS; - info->lsr &= ~UART_LSR_TEMT; - tty_wakeup(tty); - return; - } - if (slen < 0) { - /* Error: no channel, already shutdown, or wrong parameter */ - dev_kfree_skb(skb); - return; - } - skb_queue_head(&info->xmit_queue, skb); -} - -#ifdef CONFIG_ISDN_AUDIO -static int -isdn_tty_countDLE(unsigned char *buf, int len) -{ - int count = 0; - - while (len--) - if (*buf++ == DLE) - count++; - return count; -} - -/* This routine is called from within isdn_tty_write() to perform - * DLE-decoding when sending audio-data. - */ -static int -isdn_tty_handleDLEdown(modem_info *info, atemu *m, int len) -{ - unsigned char *p = &info->port.xmit_buf[info->xmit_count]; - int count = 0; - - while (len > 0) { - if (m->lastDLE) { - m->lastDLE = 0; - switch (*p) { - case DLE: - /* Escape code */ - if (len > 1) - memmove(p, p + 1, len - 1); - p--; - count++; - break; - case ETX: - /* End of data */ - info->vonline |= 4; - return count; - case DC4: - /* Abort RX */ - info->vonline &= ~1; -#ifdef ISDN_DEBUG_MODEM_VOICE - printk(KERN_DEBUG - "DLEdown: got DLE-DC4, send DLE-ETX on ttyI%d\n", - info->line); -#endif - isdn_tty_at_cout("\020\003", info); - if (!info->vonline) { -#ifdef ISDN_DEBUG_MODEM_VOICE - printk(KERN_DEBUG - "DLEdown: send VCON on ttyI%d\n", - info->line); -#endif - isdn_tty_at_cout("\r\nVCON\r\n", info); - } - /* Fall through */ - case 'q': - case 's': - /* Silence */ - if (len > 1) - memmove(p, p + 1, len - 1); - p--; - break; - } - } else { - if (*p == DLE) - m->lastDLE = 1; - else - count++; - } - p++; - len--; - } - if (len < 0) { - printk(KERN_WARNING "isdn_tty: len<0 in DLEdown\n"); - return 0; - } - return count; -} - -/* This routine is called from within isdn_tty_write() when receiving - * audio-data. It interrupts receiving, if an character other than - * ^S or ^Q is sent. - */ -static int -isdn_tty_end_vrx(const char *buf, int c) -{ - char ch; - - while (c--) { - ch = *buf; - if ((ch != 0x11) && (ch != 0x13)) - return 1; - buf++; - } - return 0; -} - -static int voice_cf[7] = -{0, 0, 4, 3, 2, 0, 0}; - -#endif /* CONFIG_ISDN_AUDIO */ - -/* isdn_tty_senddown() is called either directly from within isdn_tty_write() - * or via timer-interrupt from within isdn_tty_modem_xmit(). It pulls - * outgoing data from the tty's xmit-buffer, handles voice-decompression or - * T.70 if necessary, and finally queues it up for sending via isdn_tty_tint. - */ -static void -isdn_tty_senddown(modem_info *info) -{ - int buflen; - int skb_res; -#ifdef CONFIG_ISDN_AUDIO - int audio_len; -#endif - struct sk_buff *skb; - -#ifdef CONFIG_ISDN_AUDIO - if (info->vonline & 4) { - info->vonline &= ~6; - if (!info->vonline) { -#ifdef ISDN_DEBUG_MODEM_VOICE - printk(KERN_DEBUG - "senddown: send VCON on ttyI%d\n", - info->line); -#endif - isdn_tty_at_cout("\r\nVCON\r\n", info); - } - } -#endif - if (!(buflen = info->xmit_count)) - return; - if ((info->emu.mdmreg[REG_CTS] & BIT_CTS) != 0) - info->msr &= ~UART_MSR_CTS; - info->lsr &= ~UART_LSR_TEMT; - /* info->xmit_count is modified here and in isdn_tty_write(). - * So we return here if isdn_tty_write() is in the - * critical section. - */ - atomic_inc(&info->xmit_lock); - if (!(atomic_dec_and_test(&info->xmit_lock))) - return; - if (info->isdn_driver < 0) { - info->xmit_count = 0; - return; - } - skb_res = dev->drv[info->isdn_driver]->interface->hl_hdrlen + 4; -#ifdef CONFIG_ISDN_AUDIO - if (info->vonline & 2) - audio_len = buflen * voice_cf[info->emu.vpar[3]]; - else - audio_len = 0; - skb = dev_alloc_skb(skb_res + buflen + audio_len); -#else - skb = dev_alloc_skb(skb_res + buflen); -#endif - if (!skb) { - printk(KERN_WARNING - "isdn_tty: Out of memory in ttyI%d senddown\n", - info->line); - return; - } - skb_reserve(skb, skb_res); - skb_put_data(skb, info->port.xmit_buf, buflen); - info->xmit_count = 0; -#ifdef CONFIG_ISDN_AUDIO - if (info->vonline & 2) { - /* For now, ifmt is fixed to 1 (alaw), since this - * is used with ISDN everywhere in the world, except - * US, Canada and Japan. - * Later, when US-ISDN protocols are implemented, - * this setting will depend on the D-channel protocol. - */ - int ifmt = 1; - - /* voice conversion/decompression */ - switch (info->emu.vpar[3]) { - case 2: - case 3: - case 4: - /* adpcm, compatible to ZyXel 1496 modem - * with ROM revision 6.01 - */ - audio_len = isdn_audio_adpcm2xlaw(info->adpcms, - ifmt, - skb->data, - skb_put(skb, audio_len), - buflen); - skb_pull(skb, buflen); - skb_trim(skb, audio_len); - break; - case 5: - /* a-law */ - if (!ifmt) - isdn_audio_alaw2ulaw(skb->data, - buflen); - break; - case 6: - /* u-law */ - if (ifmt) - isdn_audio_ulaw2alaw(skb->data, - buflen); - break; - } - } -#endif /* CONFIG_ISDN_AUDIO */ - if (info->emu.mdmreg[REG_T70] & BIT_T70) { - /* Add T.70 simplified header */ - if (info->emu.mdmreg[REG_T70] & BIT_T70_EXT) - memcpy(skb_push(skb, 2), "\1\0", 2); - else - memcpy(skb_push(skb, 4), "\1\0\1\0", 4); - } - skb_queue_tail(&info->xmit_queue, skb); -} - -/************************************************************ - * - * Modem-functions - * - * mostly "stolen" from original Linux-serial.c and friends. - * - ************************************************************/ - -/* The next routine is called once from within timer-interrupt - * triggered within isdn_tty_modem_ncarrier(). It calls - * isdn_tty_modem_result() to stuff a "NO CARRIER" Message - * into the tty's buffer. - */ -static void -isdn_tty_modem_do_ncarrier(struct timer_list *t) -{ - modem_info *info = from_timer(info, t, nc_timer); - isdn_tty_modem_result(RESULT_NO_CARRIER, info); -} - -/* Next routine is called, whenever the DTR-signal is raised. - * It checks the ncarrier-flag, and triggers the above routine - * when necessary. The ncarrier-flag is set, whenever DTR goes - * low. - */ -static void -isdn_tty_modem_ncarrier(modem_info *info) -{ - if (info->ncarrier) { - info->nc_timer.expires = jiffies + HZ; - add_timer(&info->nc_timer); - } -} - -/* - * return the usage calculated by si and layer 2 protocol - */ -static int -isdn_calc_usage(int si, int l2) -{ - int usg = ISDN_USAGE_MODEM; - -#ifdef CONFIG_ISDN_AUDIO - if (si == 1) { - switch (l2) { - case ISDN_PROTO_L2_MODEM: - usg = ISDN_USAGE_MODEM; - break; -#ifdef CONFIG_ISDN_TTY_FAX - case ISDN_PROTO_L2_FAX: - usg = ISDN_USAGE_FAX; - break; -#endif - case ISDN_PROTO_L2_TRANS: - default: - usg = ISDN_USAGE_VOICE; - break; - } - } -#endif - return (usg); -} - -/* isdn_tty_dial() performs dialing of a tty an the necessary - * setup of the lower levels before that. - */ -static void -isdn_tty_dial(char *n, modem_info *info, atemu *m) -{ - int usg = ISDN_USAGE_MODEM; - int si = 7; - int l2 = m->mdmreg[REG_L2PROT]; - u_long flags; - isdn_ctrl cmd; - int i; - int j; - - for (j = 7; j >= 0; j--) - if (m->mdmreg[REG_SI1] & (1 << j)) { - si = bit2si[j]; - break; - } - usg = isdn_calc_usage(si, l2); -#ifdef CONFIG_ISDN_AUDIO - if ((si == 1) && - (l2 != ISDN_PROTO_L2_MODEM) -#ifdef CONFIG_ISDN_TTY_FAX - && (l2 != ISDN_PROTO_L2_FAX) -#endif - ) { - l2 = ISDN_PROTO_L2_TRANS; - usg = ISDN_USAGE_VOICE; - } -#endif - m->mdmreg[REG_SI1I] = si2bit[si]; - spin_lock_irqsave(&dev->lock, flags); - i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn); - if (i < 0) { - spin_unlock_irqrestore(&dev->lock, flags); - isdn_tty_modem_result(RESULT_NO_DIALTONE, info); - } else { - info->isdn_driver = dev->drvmap[i]; - info->isdn_channel = dev->chanmap[i]; - info->drv_index = i; - dev->m_idx[i] = info->line; - dev->usage[i] |= ISDN_USAGE_OUTGOING; - info->last_dir = 1; - strcpy(info->last_num, n); - isdn_info_update(); - spin_unlock_irqrestore(&dev->lock, flags); - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - cmd.command = ISDN_CMD_CLREAZ; - isdn_command(&cmd); - strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver)); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETEAZ; - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETL2; - info->last_l2 = l2; - cmd.arg = info->isdn_channel + (l2 << 8); - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETL3; - cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8); -#ifdef CONFIG_ISDN_TTY_FAX - if (l2 == ISDN_PROTO_L2_FAX) { - cmd.parm.fax = info->fax; - info->fax->direction = ISDN_TTY_FAX_CONN_OUT; - } -#endif - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - sprintf(cmd.parm.setup.phone, "%s", n); - sprintf(cmd.parm.setup.eazmsn, "%s", - isdn_map_eaz2msn(m->msn, info->isdn_driver)); - cmd.parm.setup.si1 = si; - cmd.parm.setup.si2 = m->mdmreg[REG_SI2]; - cmd.command = ISDN_CMD_DIAL; - info->dialing = 1; - info->emu.carrierwait = 0; - strcpy(dev->num[i], n); - isdn_info_update(); - isdn_command(&cmd); - isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1); - } -} - -/* isdn_tty_hangup() disassociates a tty from the real - * ISDN-line (hangup). The usage-status is cleared - * and some cleanup is done also. - */ -void -isdn_tty_modem_hup(modem_info *info, int local) -{ - isdn_ctrl cmd; - int di, ch; - - if (!info) - return; - - di = info->isdn_driver; - ch = info->isdn_channel; - if (di < 0 || ch < 0) - return; - - info->isdn_driver = -1; - info->isdn_channel = -1; - -#ifdef ISDN_DEBUG_MODEM_HUP - printk(KERN_DEBUG "Mhup ttyI%d\n", info->line); -#endif - info->rcvsched = 0; - isdn_tty_flush_buffer(info->port.tty); - if (info->online) { - info->last_lhup = local; - info->online = 0; - isdn_tty_modem_result(RESULT_NO_CARRIER, info); - } -#ifdef CONFIG_ISDN_AUDIO - info->vonline = 0; -#ifdef CONFIG_ISDN_TTY_FAX - info->faxonline = 0; - info->fax->phase = ISDN_FAX_PHASE_IDLE; -#endif - info->emu.vpar[4] = 0; - info->emu.vpar[5] = 8; - kfree(info->dtmf_state); - info->dtmf_state = NULL; - kfree(info->silence_state); - info->silence_state = NULL; - kfree(info->adpcms); - info->adpcms = NULL; - kfree(info->adpcmr); - info->adpcmr = NULL; -#endif - if ((info->msr & UART_MSR_RI) && - (info->emu.mdmreg[REG_RUNG] & BIT_RUNG)) - isdn_tty_modem_result(RESULT_RUNG, info); - info->msr &= ~(UART_MSR_DCD | UART_MSR_RI); - info->lsr |= UART_LSR_TEMT; - - if (local) { - cmd.driver = di; - cmd.command = ISDN_CMD_HANGUP; - cmd.arg = ch; - isdn_command(&cmd); - } - - isdn_all_eaz(di, ch); - info->emu.mdmreg[REG_RINGCNT] = 0; - isdn_free_channel(di, ch, 0); - - if (info->drv_index >= 0) { - dev->m_idx[info->drv_index] = -1; - info->drv_index = -1; - } -} - -/* - * Begin of a CAPI like interface, currently used only for - * supplementary service (CAPI 2.0 part III) - */ -#include -#include - -int -isdn_tty_capi_facility(capi_msg *cm) { - return (-1); /* dummy */ -} - -/* isdn_tty_suspend() tries to suspend the current tty connection - */ -static void -isdn_tty_suspend(char *id, modem_info *info, atemu *m) -{ - isdn_ctrl cmd; - - int l; - - if (!info) - return; - -#ifdef ISDN_DEBUG_MODEM_SERVICES - printk(KERN_DEBUG "Msusp ttyI%d\n", info->line); -#endif - l = strlen(id); - if ((info->isdn_driver >= 0)) { - cmd.parm.cmsg.Length = l + 18; - cmd.parm.cmsg.Command = CAPI_FACILITY; - cmd.parm.cmsg.Subcommand = CAPI_REQ; - cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1; - cmd.parm.cmsg.para[0] = 3; /* 16 bit 0x0003 suplementary service */ - cmd.parm.cmsg.para[1] = 0; - cmd.parm.cmsg.para[2] = l + 3; - cmd.parm.cmsg.para[3] = 4; /* 16 bit 0x0004 Suspend */ - cmd.parm.cmsg.para[4] = 0; - cmd.parm.cmsg.para[5] = l; - memcpy(&cmd.parm.cmsg.para[6], id, l); - cmd.command = CAPI_PUT_MESSAGE; - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - isdn_command(&cmd); - } -} - -/* isdn_tty_resume() tries to resume a suspended call - * setup of the lower levels before that. unfortunately here is no - * checking for compatibility of used protocols implemented by Q931 - * It does the same things like isdn_tty_dial, the last command - * is different, may be we can merge it. - */ - -static void -isdn_tty_resume(char *id, modem_info *info, atemu *m) -{ - int usg = ISDN_USAGE_MODEM; - int si = 7; - int l2 = m->mdmreg[REG_L2PROT]; - isdn_ctrl cmd; - ulong flags; - int i; - int j; - int l; - - l = strlen(id); - for (j = 7; j >= 0; j--) - if (m->mdmreg[REG_SI1] & (1 << j)) { - si = bit2si[j]; - break; - } - usg = isdn_calc_usage(si, l2); -#ifdef CONFIG_ISDN_AUDIO - if ((si == 1) && - (l2 != ISDN_PROTO_L2_MODEM) -#ifdef CONFIG_ISDN_TTY_FAX - && (l2 != ISDN_PROTO_L2_FAX) -#endif - ) { - l2 = ISDN_PROTO_L2_TRANS; - usg = ISDN_USAGE_VOICE; - } -#endif - m->mdmreg[REG_SI1I] = si2bit[si]; - spin_lock_irqsave(&dev->lock, flags); - i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn); - if (i < 0) { - spin_unlock_irqrestore(&dev->lock, flags); - isdn_tty_modem_result(RESULT_NO_DIALTONE, info); - } else { - info->isdn_driver = dev->drvmap[i]; - info->isdn_channel = dev->chanmap[i]; - info->drv_index = i; - dev->m_idx[i] = info->line; - dev->usage[i] |= ISDN_USAGE_OUTGOING; - info->last_dir = 1; -// strcpy(info->last_num, n); - isdn_info_update(); - spin_unlock_irqrestore(&dev->lock, flags); - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - cmd.command = ISDN_CMD_CLREAZ; - isdn_command(&cmd); - strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver)); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETEAZ; - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETL2; - info->last_l2 = l2; - cmd.arg = info->isdn_channel + (l2 << 8); - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETL3; - cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8); - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - cmd.parm.cmsg.Length = l + 18; - cmd.parm.cmsg.Command = CAPI_FACILITY; - cmd.parm.cmsg.Subcommand = CAPI_REQ; - cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1; - cmd.parm.cmsg.para[0] = 3; /* 16 bit 0x0003 suplementary service */ - cmd.parm.cmsg.para[1] = 0; - cmd.parm.cmsg.para[2] = l + 3; - cmd.parm.cmsg.para[3] = 5; /* 16 bit 0x0005 Resume */ - cmd.parm.cmsg.para[4] = 0; - cmd.parm.cmsg.para[5] = l; - memcpy(&cmd.parm.cmsg.para[6], id, l); - cmd.command = CAPI_PUT_MESSAGE; - info->dialing = 1; -// strcpy(dev->num[i], n); - isdn_info_update(); - isdn_command(&cmd); - isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1); - } -} - -/* isdn_tty_send_msg() sends a message to a HL driver - * This is used for hybrid modem cards to send AT commands to it - */ - -static void -isdn_tty_send_msg(modem_info *info, atemu *m, char *msg) -{ - int usg = ISDN_USAGE_MODEM; - int si = 7; - int l2 = m->mdmreg[REG_L2PROT]; - isdn_ctrl cmd; - ulong flags; - int i; - int j; - int l; - - l = min(strlen(msg), sizeof(cmd.parm) - sizeof(cmd.parm.cmsg) - + sizeof(cmd.parm.cmsg.para) - 2); - - if (!l) { - isdn_tty_modem_result(RESULT_ERROR, info); - return; - } - for (j = 7; j >= 0; j--) - if (m->mdmreg[REG_SI1] & (1 << j)) { - si = bit2si[j]; - break; - } - usg = isdn_calc_usage(si, l2); -#ifdef CONFIG_ISDN_AUDIO - if ((si == 1) && - (l2 != ISDN_PROTO_L2_MODEM) -#ifdef CONFIG_ISDN_TTY_FAX - && (l2 != ISDN_PROTO_L2_FAX) -#endif - ) { - l2 = ISDN_PROTO_L2_TRANS; - usg = ISDN_USAGE_VOICE; - } -#endif - m->mdmreg[REG_SI1I] = si2bit[si]; - spin_lock_irqsave(&dev->lock, flags); - i = isdn_get_free_channel(usg, l2, m->mdmreg[REG_L3PROT], -1, -1, m->msn); - if (i < 0) { - spin_unlock_irqrestore(&dev->lock, flags); - isdn_tty_modem_result(RESULT_NO_DIALTONE, info); - } else { - info->isdn_driver = dev->drvmap[i]; - info->isdn_channel = dev->chanmap[i]; - info->drv_index = i; - dev->m_idx[i] = info->line; - dev->usage[i] |= ISDN_USAGE_OUTGOING; - info->last_dir = 1; - isdn_info_update(); - spin_unlock_irqrestore(&dev->lock, flags); - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - cmd.command = ISDN_CMD_CLREAZ; - isdn_command(&cmd); - strcpy(cmd.parm.num, isdn_map_eaz2msn(m->msn, info->isdn_driver)); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETEAZ; - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETL2; - info->last_l2 = l2; - cmd.arg = info->isdn_channel + (l2 << 8); - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETL3; - cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8); - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - cmd.parm.cmsg.Length = l + 14; - cmd.parm.cmsg.Command = CAPI_MANUFACTURER; - cmd.parm.cmsg.Subcommand = CAPI_REQ; - cmd.parm.cmsg.adr.Controller = info->isdn_driver + 1; - cmd.parm.cmsg.para[0] = l + 1; - strncpy(&cmd.parm.cmsg.para[1], msg, l); - cmd.parm.cmsg.para[l + 1] = 0xd; - cmd.command = CAPI_PUT_MESSAGE; -/* info->dialing = 1; - strcpy(dev->num[i], n); - isdn_info_update(); -*/ - isdn_command(&cmd); - } -} - -static inline int -isdn_tty_paranoia_check(modem_info *info, char *name, const char *routine) -{ -#ifdef MODEM_PARANOIA_CHECK - if (!info) { - printk(KERN_WARNING "isdn_tty: null info_struct for %s in %s\n", - name, routine); - return 1; - } - if (info->magic != ISDN_ASYNC_MAGIC) { - printk(KERN_WARNING "isdn_tty: bad magic for modem struct %s in %s\n", - name, routine); - return 1; - } -#endif - return 0; -} - -/* - * This routine is called to set the UART divisor registers to match - * the specified baud rate for a serial port. - */ -static void -isdn_tty_change_speed(modem_info *info) -{ - struct tty_port *port = &info->port; - uint cflag, - cval, - quot; - int i; - - if (!port->tty) - return; - cflag = port->tty->termios.c_cflag; - - quot = i = cflag & CBAUD; - if (i & CBAUDEX) { - i &= ~CBAUDEX; - if (i < 1 || i > 2) - port->tty->termios.c_cflag &= ~CBAUDEX; - else - i += 15; - } - if (quot) { - info->mcr |= UART_MCR_DTR; - isdn_tty_modem_ncarrier(info); - } else { - info->mcr &= ~UART_MCR_DTR; - if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) { -#ifdef ISDN_DEBUG_MODEM_HUP - printk(KERN_DEBUG "Mhup in changespeed\n"); -#endif - if (info->online) - info->ncarrier = 1; - isdn_tty_modem_reset_regs(info, 0); - isdn_tty_modem_hup(info, 1); - } - return; - } - /* byte size and parity */ - cval = cflag & (CSIZE | CSTOPB); - cval >>= 4; - if (cflag & PARENB) - cval |= UART_LCR_PARITY; - if (!(cflag & PARODD)) - cval |= UART_LCR_EPAR; - - tty_port_set_check_carrier(port, ~cflag & CLOCAL); -} - -static int -isdn_tty_startup(modem_info *info) -{ - if (tty_port_initialized(&info->port)) - return 0; - isdn_lock_drivers(); -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "starting up ttyi%d ...\n", info->line); -#endif - /* - * Now, initialize the UART - */ - info->mcr = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2; - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - /* - * and set the speed of the serial port - */ - isdn_tty_change_speed(info); - - tty_port_set_initialized(&info->port, 1); - info->msr |= (UART_MSR_DSR | UART_MSR_CTS); - info->send_outstanding = 0; - return 0; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void -isdn_tty_shutdown(modem_info *info) -{ - if (!tty_port_initialized(&info->port)) - return; -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "Shutting down isdnmodem port %d ....\n", info->line); -#endif - isdn_unlock_drivers(); - info->msr &= ~UART_MSR_RI; - if (!info->port.tty || (info->port.tty->termios.c_cflag & HUPCL)) { - info->mcr &= ~(UART_MCR_DTR | UART_MCR_RTS); - if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) { - isdn_tty_modem_reset_regs(info, 0); -#ifdef ISDN_DEBUG_MODEM_HUP - printk(KERN_DEBUG "Mhup in isdn_tty_shutdown\n"); -#endif - isdn_tty_modem_hup(info, 1); - } - } - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - tty_port_set_initialized(&info->port, 0); -} - -/* isdn_tty_write() is the main send-routine. It is called from the upper - * levels within the kernel to perform sending data. Depending on the - * online-flag it either directs output to the at-command-interpreter or - * to the lower level. Additional tasks done here: - * - If online, check for escape-sequence (+++) - * - If sending audio-data, call isdn_tty_DLEdown() to parse DLE-codes. - * - If receiving audio-data, call isdn_tty_end_vrx() to abort if needed. - * - If dialing, abort dial. - */ -static int -isdn_tty_write(struct tty_struct *tty, const u_char *buf, int count) -{ - int c; - int total = 0; - modem_info *info = (modem_info *) tty->driver_data; - atemu *m = &info->emu; - - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_write")) - return 0; - /* See isdn_tty_senddown() */ - atomic_inc(&info->xmit_lock); - while (1) { - c = count; - if (c > info->xmit_size - info->xmit_count) - c = info->xmit_size - info->xmit_count; - if (info->isdn_driver >= 0 && c > dev->drv[info->isdn_driver]->maxbufsize) - c = dev->drv[info->isdn_driver]->maxbufsize; - if (c <= 0) - break; - if ((info->online > 1) -#ifdef CONFIG_ISDN_AUDIO - || (info->vonline & 3) -#endif - ) { -#ifdef CONFIG_ISDN_AUDIO - if (!info->vonline) -#endif - isdn_tty_check_esc(buf, m->mdmreg[REG_ESC], c, - &(m->pluscount), - &(m->lastplus)); - memcpy(&info->port.xmit_buf[info->xmit_count], buf, c); -#ifdef CONFIG_ISDN_AUDIO - if (info->vonline) { - int cc = isdn_tty_handleDLEdown(info, m, c); - if (info->vonline & 2) { - if (!cc) { - /* If DLE decoding results in zero-transmit, but - * c originally was non-zero, do a wakeup. - */ - tty_wakeup(tty); - info->msr |= UART_MSR_CTS; - info->lsr |= UART_LSR_TEMT; - } - info->xmit_count += cc; - } - if ((info->vonline & 3) == 1) { - /* Do NOT handle Ctrl-Q or Ctrl-S - * when in full-duplex audio mode. - */ - if (isdn_tty_end_vrx(buf, c)) { - info->vonline &= ~1; -#ifdef ISDN_DEBUG_MODEM_VOICE - printk(KERN_DEBUG - "got !^Q/^S, send DLE-ETX,VCON on ttyI%d\n", - info->line); -#endif - isdn_tty_at_cout("\020\003\r\nVCON\r\n", info); - } - } - } else - if (TTY_IS_FCLASS1(info)) { - int cc = isdn_tty_handleDLEdown(info, m, c); - - if (info->vonline & 4) { /* ETX seen */ - isdn_ctrl c; - - c.command = ISDN_CMD_FAXCMD; - c.driver = info->isdn_driver; - c.arg = info->isdn_channel; - c.parm.aux.cmd = ISDN_FAX_CLASS1_CTRL; - c.parm.aux.subcmd = ETX; - isdn_command(&c); - } - info->vonline = 0; -#ifdef ISDN_DEBUG_MODEM_VOICE - printk(KERN_DEBUG "fax dle cc/c %d/%d\n", cc, c); -#endif - info->xmit_count += cc; - } else -#endif - info->xmit_count += c; - } else { - info->msr |= UART_MSR_CTS; - info->lsr |= UART_LSR_TEMT; - if (info->dialing) { - info->dialing = 0; -#ifdef ISDN_DEBUG_MODEM_HUP - printk(KERN_DEBUG "Mhup in isdn_tty_write\n"); -#endif - isdn_tty_modem_result(RESULT_NO_CARRIER, info); - isdn_tty_modem_hup(info, 1); - } else - c = isdn_tty_edit_at(buf, c, info); - } - buf += c; - count -= c; - total += c; - } - atomic_dec(&info->xmit_lock); - if ((info->xmit_count) || !skb_queue_empty(&info->xmit_queue)) { - if (m->mdmreg[REG_DXMT] & BIT_DXMT) { - isdn_tty_senddown(info); - isdn_tty_tint(info); - } - isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, 1); - } - return total; -} - -static int -isdn_tty_write_room(struct tty_struct *tty) -{ - modem_info *info = (modem_info *) tty->driver_data; - int ret; - - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_write_room")) - return 0; - if (!info->online) - return info->xmit_size; - ret = info->xmit_size - info->xmit_count; - return (ret < 0) ? 0 : ret; -} - -static int -isdn_tty_chars_in_buffer(struct tty_struct *tty) -{ - modem_info *info = (modem_info *) tty->driver_data; - - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_chars_in_buffer")) - return 0; - if (!info->online) - return 0; - return (info->xmit_count); -} - -static void -isdn_tty_flush_buffer(struct tty_struct *tty) -{ - modem_info *info; - - if (!tty) { - return; - } - info = (modem_info *) tty->driver_data; - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_flush_buffer")) { - return; - } - isdn_tty_cleanup_xmit(info); - info->xmit_count = 0; - tty_wakeup(tty); -} - -static void -isdn_tty_flush_chars(struct tty_struct *tty) -{ - modem_info *info = (modem_info *) tty->driver_data; - - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_flush_chars")) - return; - if ((info->xmit_count) || !skb_queue_empty(&info->xmit_queue)) - isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, 1); -} - -/* - * ------------------------------------------------------------ - * isdn_tty_throttle() - * - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - * ------------------------------------------------------------ - */ -static void -isdn_tty_throttle(struct tty_struct *tty) -{ - modem_info *info = (modem_info *) tty->driver_data; - - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_throttle")) - return; - if (I_IXOFF(tty)) - info->x_char = STOP_CHAR(tty); - info->mcr &= ~UART_MCR_RTS; -} - -static void -isdn_tty_unthrottle(struct tty_struct *tty) -{ - modem_info *info = (modem_info *) tty->driver_data; - - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_unthrottle")) - return; - if (I_IXOFF(tty)) { - if (info->x_char) - info->x_char = 0; - else - info->x_char = START_CHAR(tty); - } - info->mcr |= UART_MCR_RTS; -} - -/* - * ------------------------------------------------------------ - * isdn_tty_ioctl() and friends - * ------------------------------------------------------------ - */ - -/* - * isdn_tty_get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows RS485 driver to be written in user space. - */ -static int -isdn_tty_get_lsr_info(modem_info *info, uint __user *value) -{ - u_char status; - uint result; - - status = info->lsr; - result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); - return put_user(result, value); -} - - -static int -isdn_tty_tiocmget(struct tty_struct *tty) -{ - modem_info *info = (modem_info *) tty->driver_data; - u_char control, status; - - if (isdn_tty_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - if (tty_io_error(tty)) - return -EIO; - - mutex_lock(&modem_info_mutex); -#ifdef ISDN_DEBUG_MODEM_IOCTL - printk(KERN_DEBUG "ttyI%d ioctl TIOCMGET\n", info->line); -#endif - - control = info->mcr; - status = info->msr; - mutex_unlock(&modem_info_mutex); - return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) - | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) - | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) - | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) - | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) - | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); -} - -static int -isdn_tty_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - modem_info *info = (modem_info *) tty->driver_data; - - if (isdn_tty_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - if (tty_io_error(tty)) - return -EIO; - -#ifdef ISDN_DEBUG_MODEM_IOCTL - printk(KERN_DEBUG "ttyI%d ioctl TIOCMxxx: %x %x\n", info->line, set, clear); -#endif - - mutex_lock(&modem_info_mutex); - if (set & TIOCM_RTS) - info->mcr |= UART_MCR_RTS; - if (set & TIOCM_DTR) { - info->mcr |= UART_MCR_DTR; - isdn_tty_modem_ncarrier(info); - } - - if (clear & TIOCM_RTS) - info->mcr &= ~UART_MCR_RTS; - if (clear & TIOCM_DTR) { - info->mcr &= ~UART_MCR_DTR; - if (info->emu.mdmreg[REG_DTRHUP] & BIT_DTRHUP) { - isdn_tty_modem_reset_regs(info, 0); -#ifdef ISDN_DEBUG_MODEM_HUP - printk(KERN_DEBUG "Mhup in TIOCMSET\n"); -#endif - if (info->online) - info->ncarrier = 1; - isdn_tty_modem_hup(info, 1); - } - } - mutex_unlock(&modem_info_mutex); - return 0; -} - -static int -isdn_tty_ioctl(struct tty_struct *tty, uint cmd, ulong arg) -{ - modem_info *info = (modem_info *) tty->driver_data; - - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_ioctl")) - return -ENODEV; - if (tty_io_error(tty)) - return -EIO; - switch (cmd) { - case TIOCSERGETLSR: /* Get line status register */ -#ifdef ISDN_DEBUG_MODEM_IOCTL - printk(KERN_DEBUG "ttyI%d ioctl TIOCSERGETLSR\n", info->line); -#endif - return isdn_tty_get_lsr_info(info, (uint __user *) arg); - default: -#ifdef ISDN_DEBUG_MODEM_IOCTL - printk(KERN_DEBUG "UNKNOWN ioctl 0x%08x on ttyi%d\n", cmd, info->line); -#endif - return -ENOIOCTLCMD; - } - return 0; -} - -static void -isdn_tty_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - modem_info *info = (modem_info *) tty->driver_data; - - mutex_lock(&modem_info_mutex); - if (!old_termios) - isdn_tty_change_speed(info); - else { - if (tty->termios.c_cflag == old_termios->c_cflag && - tty->termios.c_ispeed == old_termios->c_ispeed && - tty->termios.c_ospeed == old_termios->c_ospeed) { - mutex_unlock(&modem_info_mutex); - return; - } - isdn_tty_change_speed(info); - } - mutex_unlock(&modem_info_mutex); -} - -/* - * ------------------------------------------------------------ - * isdn_tty_open() and friends - * ------------------------------------------------------------ - */ - -static int isdn_tty_install(struct tty_driver *driver, struct tty_struct *tty) -{ - modem_info *info = &dev->mdm.info[tty->index]; - - if (isdn_tty_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - - tty->driver_data = info; - - return tty_port_install(&info->port, driver, tty); -} - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its async structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -static int -isdn_tty_open(struct tty_struct *tty, struct file *filp) -{ - modem_info *info = tty->driver_data; - struct tty_port *port = &info->port; - int retval; - -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "isdn_tty_open %s, count = %d\n", tty->name, - port->count); -#endif - port->count++; - port->tty = tty; - /* - * Start up serial port - */ - retval = isdn_tty_startup(info); - if (retval) { -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "isdn_tty_open return after startup\n"); -#endif - return retval; - } - retval = tty_port_block_til_ready(port, tty, filp); - if (retval) { -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "isdn_tty_open return after isdn_tty_block_til_ready \n"); -#endif - return retval; - } -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "isdn_tty_open ttyi%d successful...\n", info->line); -#endif - dev->modempoll++; -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "isdn_tty_open normal exit\n"); -#endif - return 0; -} - -static void -isdn_tty_close(struct tty_struct *tty, struct file *filp) -{ - modem_info *info = (modem_info *) tty->driver_data; - struct tty_port *port = &info->port; - ulong timeout; - - if (!info || isdn_tty_paranoia_check(info, tty->name, "isdn_tty_close")) - return; - if (tty_hung_up_p(filp)) { -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "isdn_tty_close return after tty_hung_up_p\n"); -#endif - return; - } - if ((tty->count == 1) && (port->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_ERR "isdn_tty_close: bad port count; tty->count is 1, " - "info->count is %d\n", port->count); - port->count = 1; - } - if (--port->count < 0) { - printk(KERN_ERR "isdn_tty_close: bad port count for ttyi%d: %d\n", - info->line, port->count); - port->count = 0; - } - if (port->count) { -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "isdn_tty_close after info->count != 0\n"); -#endif - return; - } - info->closing = 1; - - tty->closing = 1; - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - if (tty_port_initialized(port)) { - tty_wait_until_sent(tty, 3000); /* 30 seconds timeout */ - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = jiffies + HZ; - while (!(info->lsr & UART_LSR_TEMT)) { - schedule_timeout_interruptible(20); - if (time_after(jiffies, timeout)) - break; - } - } - dev->modempoll--; - isdn_tty_shutdown(info); - isdn_tty_flush_buffer(tty); - tty_ldisc_flush(tty); - port->tty = NULL; - info->ncarrier = 0; - - tty_port_close_end(port, tty); - info->closing = 0; -#ifdef ISDN_DEBUG_MODEM_OPEN - printk(KERN_DEBUG "isdn_tty_close normal exit\n"); -#endif -} - -/* - * isdn_tty_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -static void -isdn_tty_hangup(struct tty_struct *tty) -{ - modem_info *info = (modem_info *) tty->driver_data; - struct tty_port *port = &info->port; - - if (isdn_tty_paranoia_check(info, tty->name, "isdn_tty_hangup")) - return; - isdn_tty_shutdown(info); - port->count = 0; - tty_port_set_active(port, 0); - port->tty = NULL; - wake_up_interruptible(&port->open_wait); -} - -/* This routine initializes all emulator-data. - */ -static void -isdn_tty_reset_profile(atemu *m) -{ - m->profile[0] = 0; - m->profile[1] = 0; - m->profile[2] = 43; - m->profile[3] = 13; - m->profile[4] = 10; - m->profile[5] = 8; - m->profile[6] = 3; - m->profile[7] = 60; - m->profile[8] = 2; - m->profile[9] = 6; - m->profile[10] = 7; - m->profile[11] = 70; - m->profile[12] = 0x45; - m->profile[13] = 4; - m->profile[14] = ISDN_PROTO_L2_X75I; - m->profile[15] = ISDN_PROTO_L3_TRANS; - m->profile[16] = ISDN_SERIAL_XMIT_SIZE / 16; - m->profile[17] = ISDN_MODEM_WINSIZE; - m->profile[18] = 4; - m->profile[19] = 0; - m->profile[20] = 0; - m->profile[23] = 0; - m->pmsn[0] = '\0'; - m->plmsn[0] = '\0'; -} - -#ifdef CONFIG_ISDN_AUDIO -static void -isdn_tty_modem_reset_vpar(atemu *m) -{ - m->vpar[0] = 2; /* Voice-device (2 = phone line) */ - m->vpar[1] = 0; /* Silence detection level (0 = none ) */ - m->vpar[2] = 70; /* Silence interval (7 sec. ) */ - m->vpar[3] = 2; /* Compression type (1 = ADPCM-2 ) */ - m->vpar[4] = 0; /* DTMF detection level (0 = softcode ) */ - m->vpar[5] = 8; /* DTMF interval (8 * 5 ms. ) */ -} -#endif - -#ifdef CONFIG_ISDN_TTY_FAX -static void -isdn_tty_modem_reset_faxpar(modem_info *info) -{ - T30_s *f = info->fax; - - f->code = 0; - f->phase = ISDN_FAX_PHASE_IDLE; - f->direction = 0; - f->resolution = 1; /* fine */ - f->rate = 5; /* 14400 bit/s */ - f->width = 0; - f->length = 0; - f->compression = 0; - f->ecm = 0; - f->binary = 0; - f->scantime = 0; - memset(&f->id[0], 32, FAXIDLEN - 1); - f->id[FAXIDLEN - 1] = 0; - f->badlin = 0; - f->badmul = 0; - f->bor = 0; - f->nbc = 0; - f->cq = 0; - f->cr = 0; - f->ctcrty = 0; - f->minsp = 0; - f->phcto = 30; - f->rel = 0; - memset(&f->pollid[0], 32, FAXIDLEN - 1); - f->pollid[FAXIDLEN - 1] = 0; -} -#endif - -static void -isdn_tty_modem_reset_regs(modem_info *info, int force) -{ - atemu *m = &info->emu; - if ((m->mdmreg[REG_DTRR] & BIT_DTRR) || force) { - memcpy(m->mdmreg, m->profile, ISDN_MODEM_NUMREG); - memcpy(m->msn, m->pmsn, ISDN_MSNLEN); - memcpy(m->lmsn, m->plmsn, ISDN_LMSNLEN); - info->xmit_size = m->mdmreg[REG_PSIZE] * 16; - } -#ifdef CONFIG_ISDN_AUDIO - isdn_tty_modem_reset_vpar(m); -#endif -#ifdef CONFIG_ISDN_TTY_FAX - isdn_tty_modem_reset_faxpar(info); -#endif - m->mdmcmdl = 0; -} - -static void -modem_write_profile(atemu *m) -{ - memcpy(m->profile, m->mdmreg, ISDN_MODEM_NUMREG); - memcpy(m->pmsn, m->msn, ISDN_MSNLEN); - memcpy(m->plmsn, m->lmsn, ISDN_LMSNLEN); - if (dev->profd) - send_sig(SIGIO, dev->profd, 1); -} - -static const struct tty_operations modem_ops = { - .install = isdn_tty_install, - .open = isdn_tty_open, - .close = isdn_tty_close, - .write = isdn_tty_write, - .flush_chars = isdn_tty_flush_chars, - .write_room = isdn_tty_write_room, - .chars_in_buffer = isdn_tty_chars_in_buffer, - .flush_buffer = isdn_tty_flush_buffer, - .ioctl = isdn_tty_ioctl, - .throttle = isdn_tty_throttle, - .unthrottle = isdn_tty_unthrottle, - .set_termios = isdn_tty_set_termios, - .hangup = isdn_tty_hangup, - .tiocmget = isdn_tty_tiocmget, - .tiocmset = isdn_tty_tiocmset, -}; - -static int isdn_tty_carrier_raised(struct tty_port *port) -{ - modem_info *info = container_of(port, modem_info, port); - return info->msr & UART_MSR_DCD; -} - -static const struct tty_port_operations isdn_tty_port_ops = { - .carrier_raised = isdn_tty_carrier_raised, -}; - -int -isdn_tty_modem_init(void) -{ - isdn_modem_t *m; - int i, retval; - modem_info *info; - - m = &dev->mdm; - m->tty_modem = alloc_tty_driver(ISDN_MAX_CHANNELS); - if (!m->tty_modem) - return -ENOMEM; - m->tty_modem->name = "ttyI"; - m->tty_modem->major = ISDN_TTY_MAJOR; - m->tty_modem->minor_start = 0; - m->tty_modem->type = TTY_DRIVER_TYPE_SERIAL; - m->tty_modem->subtype = SERIAL_TYPE_NORMAL; - m->tty_modem->init_termios = tty_std_termios; - m->tty_modem->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; - m->tty_modem->flags = TTY_DRIVER_REAL_RAW; - m->tty_modem->driver_name = "isdn_tty"; - tty_set_operations(m->tty_modem, &modem_ops); - retval = tty_register_driver(m->tty_modem); - if (retval) { - printk(KERN_WARNING "isdn_tty: Couldn't register modem-device\n"); - goto err; - } - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - info = &m->info[i]; -#ifdef CONFIG_ISDN_TTY_FAX - if (!(info->fax = kmalloc(sizeof(T30_s), GFP_KERNEL))) { - printk(KERN_ERR "Could not allocate fax t30-buffer\n"); - retval = -ENOMEM; - goto err_unregister; - } -#endif - tty_port_init(&info->port); - info->port.ops = &isdn_tty_port_ops; - spin_lock_init(&info->readlock); - sprintf(info->last_cause, "0000"); - sprintf(info->last_num, "none"); - info->last_dir = 0; - info->last_lhup = 1; - info->last_l2 = -1; - info->last_si = 0; - isdn_tty_reset_profile(&info->emu); - isdn_tty_modem_reset_regs(info, 1); - info->magic = ISDN_ASYNC_MAGIC; - info->line = i; - info->x_char = 0; - info->isdn_driver = -1; - info->isdn_channel = -1; - info->drv_index = -1; - info->xmit_size = ISDN_SERIAL_XMIT_SIZE; - timer_setup(&info->nc_timer, isdn_tty_modem_do_ncarrier, 0); - skb_queue_head_init(&info->xmit_queue); -#ifdef CONFIG_ISDN_AUDIO - skb_queue_head_init(&info->dtmf_queue); -#endif - info->port.xmit_buf = kmalloc(ISDN_SERIAL_XMIT_MAX + 5, - GFP_KERNEL); - if (!info->port.xmit_buf) { - printk(KERN_ERR "Could not allocate modem xmit-buffer\n"); - retval = -ENOMEM; - goto err_unregister; - } - /* Make room for T.70 header */ - info->port.xmit_buf += 4; - } - return 0; -err_unregister: - for (i--; i >= 0; i--) { - info = &m->info[i]; -#ifdef CONFIG_ISDN_TTY_FAX - kfree(info->fax); -#endif - kfree(info->port.xmit_buf - 4); - info->port.xmit_buf = NULL; - tty_port_destroy(&info->port); - } - tty_unregister_driver(m->tty_modem); -err: - put_tty_driver(m->tty_modem); - m->tty_modem = NULL; - return retval; -} - -void -isdn_tty_exit(void) -{ - modem_info *info; - int i; - - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - info = &dev->mdm.info[i]; - isdn_tty_cleanup_xmit(info); -#ifdef CONFIG_ISDN_TTY_FAX - kfree(info->fax); -#endif - kfree(info->port.xmit_buf - 4); - info->port.xmit_buf = NULL; - tty_port_destroy(&info->port); - } - tty_unregister_driver(dev->mdm.tty_modem); - put_tty_driver(dev->mdm.tty_modem); - dev->mdm.tty_modem = NULL; -} - - -/* - * isdn_tty_match_icall(char *MSN, atemu *tty_emulator, int dev_idx) - * match the MSN against the MSNs (glob patterns) defined for tty_emulator, - * and return 0 for match, 1 for no match, 2 if MSN could match if longer. - */ - -static int -isdn_tty_match_icall(char *cid, atemu *emu, int di) -{ -#ifdef ISDN_DEBUG_MODEM_ICALL - printk(KERN_DEBUG "m_fi: msn=%s lmsn=%s mmsn=%s mreg[SI1]=%d mreg[SI2]=%d\n", - emu->msn, emu->lmsn, isdn_map_eaz2msn(emu->msn, di), - emu->mdmreg[REG_SI1], emu->mdmreg[REG_SI2]); -#endif - if (strlen(emu->lmsn)) { - char *p = emu->lmsn; - char *q; - int tmp; - int ret = 0; - - while (1) { - if ((q = strchr(p, ';'))) - *q = '\0'; - if ((tmp = isdn_msncmp(cid, isdn_map_eaz2msn(p, di))) > ret) - ret = tmp; -#ifdef ISDN_DEBUG_MODEM_ICALL - printk(KERN_DEBUG "m_fi: lmsnX=%s mmsn=%s -> tmp=%d\n", - p, isdn_map_eaz2msn(emu->msn, di), tmp); -#endif - if (q) { - *q = ';'; - p = q; - p++; - } - if (!tmp) - return 0; - if (!q) - break; - } - return ret; - } else { - int tmp; - tmp = isdn_msncmp(cid, isdn_map_eaz2msn(emu->msn, di)); -#ifdef ISDN_DEBUG_MODEM_ICALL - printk(KERN_DEBUG "m_fi: mmsn=%s -> tmp=%d\n", - isdn_map_eaz2msn(emu->msn, di), tmp); -#endif - return tmp; - } -} - -/* - * An incoming call-request has arrived. - * Search the tty-devices for an appropriate device and bind - * it to the ISDN-Channel. - * Return: - * - * 0 = No matching device found. - * 1 = A matching device found. - * 3 = No match found, but eventually would match, if - * CID is longer. - */ -int -isdn_tty_find_icall(int di, int ch, setup_parm *setup) -{ - char *eaz; - int i; - int wret; - int idx; - int si1; - int si2; - char *nr; - ulong flags; - - if (!setup->phone[0]) { - nr = "0"; - printk(KERN_INFO "isdn_tty: Incoming call without OAD, assuming '0'\n"); - } else - nr = setup->phone; - si1 = (int) setup->si1; - si2 = (int) setup->si2; - if (!setup->eazmsn[0]) { - printk(KERN_WARNING "isdn_tty: Incoming call without CPN, assuming '0'\n"); - eaz = "0"; - } else - eaz = setup->eazmsn; -#ifdef ISDN_DEBUG_MODEM_ICALL - printk(KERN_DEBUG "m_fi: eaz=%s si1=%d si2=%d\n", eaz, si1, si2); -#endif - wret = 0; - spin_lock_irqsave(&dev->lock, flags); - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - modem_info *info = &dev->mdm.info[i]; - - if (info->port.count == 0) - continue; - if ((info->emu.mdmreg[REG_SI1] & si2bit[si1]) && /* SI1 is matching */ - (info->emu.mdmreg[REG_SI2] == si2)) { /* SI2 is matching */ - idx = isdn_dc2minor(di, ch); -#ifdef ISDN_DEBUG_MODEM_ICALL - printk(KERN_DEBUG "m_fi: match1 wret=%d\n", wret); - printk(KERN_DEBUG "m_fi: idx=%d flags=%08lx drv=%d ch=%d usg=%d\n", idx, - info->port.flags, info->isdn_driver, - info->isdn_channel, dev->usage[idx]); -#endif - if ( -#ifndef FIX_FILE_TRANSFER - tty_port_active(&info->port) && -#endif - (info->isdn_driver == -1) && - (info->isdn_channel == -1) && - (USG_NONE(dev->usage[idx]))) { - int matchret; - - if ((matchret = isdn_tty_match_icall(eaz, &info->emu, di)) > wret) - wret = matchret; - if (!matchret) { /* EAZ is matching */ - info->isdn_driver = di; - info->isdn_channel = ch; - info->drv_index = idx; - dev->m_idx[idx] = info->line; - dev->usage[idx] &= ISDN_USAGE_EXCLUSIVE; - dev->usage[idx] |= isdn_calc_usage(si1, info->emu.mdmreg[REG_L2PROT]); - strcpy(dev->num[idx], nr); - strcpy(info->emu.cpn, eaz); - info->emu.mdmreg[REG_SI1I] = si2bit[si1]; - info->emu.mdmreg[REG_PLAN] = setup->plan; - info->emu.mdmreg[REG_SCREEN] = setup->screen; - isdn_info_update(); - spin_unlock_irqrestore(&dev->lock, flags); - printk(KERN_INFO "isdn_tty: call from %s, -> RING on ttyI%d\n", nr, - info->line); - info->msr |= UART_MSR_RI; - isdn_tty_modem_result(RESULT_RING, info); - isdn_timer_ctrl(ISDN_TIMER_MODEMRING, 1); - return 1; - } - } - } - } - spin_unlock_irqrestore(&dev->lock, flags); - printk(KERN_INFO "isdn_tty: call from %s -> %s %s\n", nr, eaz, - ((dev->drv[di]->flags & DRV_FLAG_REJBUS) && (wret != 2)) ? "rejected" : "ignored"); - return (wret == 2) ? 3 : 0; -} - -int -isdn_tty_stat_callback(int i, isdn_ctrl *c) -{ - int mi; - modem_info *info; - char *e; - - if (i < 0) - return 0; - if ((mi = dev->m_idx[i]) >= 0) { - info = &dev->mdm.info[mi]; - switch (c->command) { - case ISDN_STAT_CINF: - printk(KERN_DEBUG "CHARGEINFO on ttyI%d: %ld %s\n", info->line, c->arg, c->parm.num); - info->emu.charge = (unsigned) simple_strtoul(c->parm.num, &e, 10); - if (e == (char *)c->parm.num) - info->emu.charge = 0; - - break; - case ISDN_STAT_BSENT: -#ifdef ISDN_TTY_STAT_DEBUG - printk(KERN_DEBUG "tty_STAT_BSENT ttyI%d\n", info->line); -#endif - if ((info->isdn_driver == c->driver) && - (info->isdn_channel == c->arg)) { - info->msr |= UART_MSR_CTS; - if (info->send_outstanding) - if (!(--info->send_outstanding)) - info->lsr |= UART_LSR_TEMT; - isdn_tty_tint(info); - return 1; - } - break; - case ISDN_STAT_CAUSE: -#ifdef ISDN_TTY_STAT_DEBUG - printk(KERN_DEBUG "tty_STAT_CAUSE ttyI%d\n", info->line); -#endif - /* Signal cause to tty-device */ - strncpy(info->last_cause, c->parm.num, 5); - return 1; - case ISDN_STAT_DISPLAY: -#ifdef ISDN_TTY_STAT_DEBUG - printk(KERN_DEBUG "tty_STAT_DISPLAY ttyI%d\n", info->line); -#endif - /* Signal display to tty-device */ - if ((info->emu.mdmreg[REG_DISPLAY] & BIT_DISPLAY) && - !(info->emu.mdmreg[REG_RESPNUM] & BIT_RESPNUM)) { - isdn_tty_at_cout("\r\n", info); - isdn_tty_at_cout("DISPLAY: ", info); - isdn_tty_at_cout(c->parm.display, info); - isdn_tty_at_cout("\r\n", info); - } - return 1; - case ISDN_STAT_DCONN: -#ifdef ISDN_TTY_STAT_DEBUG - printk(KERN_DEBUG "tty_STAT_DCONN ttyI%d\n", info->line); -#endif - if (tty_port_active(&info->port)) { - if (info->dialing == 1) { - info->dialing = 2; - return 1; - } - } - break; - case ISDN_STAT_DHUP: -#ifdef ISDN_TTY_STAT_DEBUG - printk(KERN_DEBUG "tty_STAT_DHUP ttyI%d\n", info->line); -#endif - if (tty_port_active(&info->port)) { - if (info->dialing == 1) - isdn_tty_modem_result(RESULT_BUSY, info); - if (info->dialing > 1) - isdn_tty_modem_result(RESULT_NO_CARRIER, info); - info->dialing = 0; -#ifdef ISDN_DEBUG_MODEM_HUP - printk(KERN_DEBUG "Mhup in ISDN_STAT_DHUP\n"); -#endif - isdn_tty_modem_hup(info, 0); - return 1; - } - break; - case ISDN_STAT_BCONN: -#ifdef ISDN_TTY_STAT_DEBUG - printk(KERN_DEBUG "tty_STAT_BCONN ttyI%d\n", info->line); -#endif - /* Wake up any processes waiting - * for incoming call of this device when - * DCD follow the state of incoming carrier - */ - if (info->port.blocked_open && - (info->emu.mdmreg[REG_DCD] & BIT_DCD)) { - wake_up_interruptible(&info->port.open_wait); - } - - /* Schedule CONNECT-Message to any tty - * waiting for it and - * set DCD-bit of its modem-status. - */ - if (tty_port_active(&info->port) || - (info->port.blocked_open && - (info->emu.mdmreg[REG_DCD] & BIT_DCD))) { - info->msr |= UART_MSR_DCD; - info->emu.charge = 0; - if (info->dialing & 0xf) - info->last_dir = 1; - else - info->last_dir = 0; - info->dialing = 0; - info->rcvsched = 1; - if (USG_MODEM(dev->usage[i])) { - if (info->emu.mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) { - strcpy(info->emu.connmsg, c->parm.num); - isdn_tty_modem_result(RESULT_CONNECT, info); - } else - isdn_tty_modem_result(RESULT_CONNECT64000, info); - } - if (USG_VOICE(dev->usage[i])) - isdn_tty_modem_result(RESULT_VCON, info); - return 1; - } - break; - case ISDN_STAT_BHUP: -#ifdef ISDN_TTY_STAT_DEBUG - printk(KERN_DEBUG "tty_STAT_BHUP ttyI%d\n", info->line); -#endif - if (tty_port_active(&info->port)) { -#ifdef ISDN_DEBUG_MODEM_HUP - printk(KERN_DEBUG "Mhup in ISDN_STAT_BHUP\n"); -#endif - isdn_tty_modem_hup(info, 0); - return 1; - } - break; - case ISDN_STAT_NODCH: -#ifdef ISDN_TTY_STAT_DEBUG - printk(KERN_DEBUG "tty_STAT_NODCH ttyI%d\n", info->line); -#endif - if (tty_port_active(&info->port)) { - if (info->dialing) { - info->dialing = 0; - info->last_l2 = -1; - info->last_si = 0; - sprintf(info->last_cause, "0000"); - isdn_tty_modem_result(RESULT_NO_DIALTONE, info); - } - isdn_tty_modem_hup(info, 0); - return 1; - } - break; - case ISDN_STAT_UNLOAD: -#ifdef ISDN_TTY_STAT_DEBUG - printk(KERN_DEBUG "tty_STAT_UNLOAD ttyI%d\n", info->line); -#endif - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - info = &dev->mdm.info[i]; - if (info->isdn_driver == c->driver) { - if (info->online) - isdn_tty_modem_hup(info, 1); - } - } - return 1; -#ifdef CONFIG_ISDN_TTY_FAX - case ISDN_STAT_FAXIND: - if (tty_port_active(&info->port)) { - isdn_tty_fax_command(info, c); - } - break; -#endif -#ifdef CONFIG_ISDN_AUDIO - case ISDN_STAT_AUDIO: - if (tty_port_active(&info->port)) { - switch (c->parm.num[0]) { - case ISDN_AUDIO_DTMF: - if (info->vonline) { - isdn_audio_put_dle_code(info, - c->parm.num[1]); - } - break; - } - } - break; -#endif - } - } - return 0; -} - -/********************************************************************* - Modem-Emulator-Routines -*********************************************************************/ - -#define cmdchar(c) ((c >= ' ') && (c <= 0x7f)) - -/* - * Put a message from the AT-emulator into receive-buffer of tty, - * convert CR, LF, and BS to values in modem-registers 3, 4 and 5. - */ -void -isdn_tty_at_cout(char *msg, modem_info *info) -{ - struct tty_port *port = &info->port; - atemu *m = &info->emu; - char *p; - char c; - u_long flags; - struct sk_buff *skb = NULL; - char *sp = NULL; - int l; - - if (!msg) { - printk(KERN_WARNING "isdn_tty: Null-Message in isdn_tty_at_cout\n"); - return; - } - - l = strlen(msg); - - spin_lock_irqsave(&info->readlock, flags); - if (info->closing) { - spin_unlock_irqrestore(&info->readlock, flags); - return; - } - - /* use queue instead of direct, if online and */ - /* data is in queue or buffer is full */ - if (info->online && ((tty_buffer_request_room(port, l) < l) || - !skb_queue_empty(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel]))) { - skb = alloc_skb(l, GFP_ATOMIC); - if (!skb) { - spin_unlock_irqrestore(&info->readlock, flags); - return; - } - sp = skb_put(skb, l); -#ifdef CONFIG_ISDN_AUDIO - ISDN_AUDIO_SKB_DLECOUNT(skb) = 0; - ISDN_AUDIO_SKB_LOCK(skb) = 0; -#endif - } - - for (p = msg; *p; p++) { - switch (*p) { - case '\r': - c = m->mdmreg[REG_CR]; - break; - case '\n': - c = m->mdmreg[REG_LF]; - break; - case '\b': - c = m->mdmreg[REG_BS]; - break; - default: - c = *p; - } - if (skb) { - *sp++ = c; - } else { - if (tty_insert_flip_char(port, c, TTY_NORMAL) == 0) - break; - } - } - if (skb) { - __skb_queue_tail(&dev->drv[info->isdn_driver]->rpqueue[info->isdn_channel], skb); - dev->drv[info->isdn_driver]->rcvcount[info->isdn_channel] += skb->len; - spin_unlock_irqrestore(&info->readlock, flags); - /* Schedule dequeuing */ - if (dev->modempoll && info->rcvsched) - isdn_timer_ctrl(ISDN_TIMER_MODEMREAD, 1); - - } else { - spin_unlock_irqrestore(&info->readlock, flags); - tty_flip_buffer_push(port); - } -} - -/* - * Perform ATH Hangup - */ -static void -isdn_tty_on_hook(modem_info *info) -{ - if (info->isdn_channel >= 0) { -#ifdef ISDN_DEBUG_MODEM_HUP - printk(KERN_DEBUG "Mhup in isdn_tty_on_hook\n"); -#endif - isdn_tty_modem_hup(info, 1); - } -} - -static void -isdn_tty_off_hook(void) -{ - printk(KERN_DEBUG "isdn_tty_off_hook\n"); -} - -#define PLUSWAIT1 (HZ / 2) /* 0.5 sec. */ -#define PLUSWAIT2 (HZ * 3 / 2) /* 1.5 sec */ - -/* - * Check Buffer for Modem-escape-sequence, activate timer-callback to - * isdn_tty_modem_escape() if sequence found. - * - * Parameters: - * p pointer to databuffer - * plus escape-character - * count length of buffer - * pluscount count of valid escape-characters so far - * lastplus timestamp of last character - */ -static void -isdn_tty_check_esc(const u_char *p, u_char plus, int count, int *pluscount, - u_long *lastplus) -{ - if (plus > 127) - return; - if (count > 3) { - p += count - 3; - count = 3; - *pluscount = 0; - } - while (count > 0) { - if (*(p++) == plus) { - if ((*pluscount)++) { - /* Time since last '+' > 0.5 sec. ? */ - if (time_after(jiffies, *lastplus + PLUSWAIT1)) - *pluscount = 1; - } else { - /* Time since last non-'+' < 1.5 sec. ? */ - if (time_before(jiffies, *lastplus + PLUSWAIT2)) - *pluscount = 0; - } - if ((*pluscount == 3) && (count == 1)) - isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, 1); - if (*pluscount > 3) - *pluscount = 1; - } else - *pluscount = 0; - *lastplus = jiffies; - count--; - } -} - -/* - * Return result of AT-emulator to tty-receive-buffer, depending on - * modem-register 12, bit 0 and 1. - * For CONNECT-messages also switch to online-mode. - * For RING-message handle auto-ATA if register 0 != 0 - */ - -static void -isdn_tty_modem_result(int code, modem_info *info) -{ - atemu *m = &info->emu; - static char *msg[] = - {"OK", "CONNECT", "RING", "NO CARRIER", "ERROR", - "CONNECT 64000", "NO DIALTONE", "BUSY", "NO ANSWER", - "RINGING", "NO MSN/EAZ", "VCON", "RUNG"}; - char s[ISDN_MSNLEN + 10]; - - switch (code) { - case RESULT_RING: - m->mdmreg[REG_RINGCNT]++; - if (m->mdmreg[REG_RINGCNT] == m->mdmreg[REG_RINGATA]) - /* Automatically accept incoming call */ - isdn_tty_cmd_ATA(info); - break; - case RESULT_NO_CARRIER: -#ifdef ISDN_DEBUG_MODEM_HUP - printk(KERN_DEBUG "modem_result: NO CARRIER %d %d\n", - info->closing, !info->port.tty); -#endif - m->mdmreg[REG_RINGCNT] = 0; - del_timer(&info->nc_timer); - info->ncarrier = 0; - if (info->closing || !info->port.tty) - return; - -#ifdef CONFIG_ISDN_AUDIO - if (info->vonline & 1) { -#ifdef ISDN_DEBUG_MODEM_VOICE - printk(KERN_DEBUG "res3: send DLE-ETX on ttyI%d\n", - info->line); -#endif - /* voice-recording, add DLE-ETX */ - isdn_tty_at_cout("\020\003", info); - } - if (info->vonline & 2) { -#ifdef ISDN_DEBUG_MODEM_VOICE - printk(KERN_DEBUG "res3: send DLE-DC4 on ttyI%d\n", - info->line); -#endif - /* voice-playing, add DLE-DC4 */ - isdn_tty_at_cout("\020\024", info); - } -#endif - break; - case RESULT_CONNECT: - case RESULT_CONNECT64000: - sprintf(info->last_cause, "0000"); - if (!info->online) - info->online = 2; - break; - case RESULT_VCON: -#ifdef ISDN_DEBUG_MODEM_VOICE - printk(KERN_DEBUG "res3: send VCON on ttyI%d\n", - info->line); -#endif - sprintf(info->last_cause, "0000"); - if (!info->online) - info->online = 1; - break; - } /* switch (code) */ - - if (m->mdmreg[REG_RESP] & BIT_RESP) { - /* Show results */ - if (m->mdmreg[REG_RESPNUM] & BIT_RESPNUM) { - /* Show numeric results only */ - sprintf(s, "\r\n%d\r\n", code); - isdn_tty_at_cout(s, info); - } else { - if (code == RESULT_RING) { - /* return if "show RUNG" and ringcounter>1 */ - if ((m->mdmreg[REG_RUNG] & BIT_RUNG) && - (m->mdmreg[REG_RINGCNT] > 1)) - return; - /* print CID, _before_ _every_ ring */ - if (!(m->mdmreg[REG_CIDONCE] & BIT_CIDONCE)) { - isdn_tty_at_cout("\r\nCALLER NUMBER: ", info); - isdn_tty_at_cout(dev->num[info->drv_index], info); - if (m->mdmreg[REG_CDN] & BIT_CDN) { - isdn_tty_at_cout("\r\nCALLED NUMBER: ", info); - isdn_tty_at_cout(info->emu.cpn, info); - } - } - } - isdn_tty_at_cout("\r\n", info); - isdn_tty_at_cout(msg[code], info); - switch (code) { - case RESULT_CONNECT: - switch (m->mdmreg[REG_L2PROT]) { - case ISDN_PROTO_L2_MODEM: - isdn_tty_at_cout(" ", info); - isdn_tty_at_cout(m->connmsg, info); - break; - } - break; - case RESULT_RING: - /* Append CPN, if enabled */ - if ((m->mdmreg[REG_CPN] & BIT_CPN)) { - sprintf(s, "/%s", m->cpn); - isdn_tty_at_cout(s, info); - } - /* Print CID only once, _after_ 1st RING */ - if ((m->mdmreg[REG_CIDONCE] & BIT_CIDONCE) && - (m->mdmreg[REG_RINGCNT] == 1)) { - isdn_tty_at_cout("\r\n", info); - isdn_tty_at_cout("CALLER NUMBER: ", info); - isdn_tty_at_cout(dev->num[info->drv_index], info); - if (m->mdmreg[REG_CDN] & BIT_CDN) { - isdn_tty_at_cout("\r\nCALLED NUMBER: ", info); - isdn_tty_at_cout(info->emu.cpn, info); - } - } - break; - case RESULT_NO_CARRIER: - case RESULT_NO_DIALTONE: - case RESULT_BUSY: - case RESULT_NO_ANSWER: - m->mdmreg[REG_RINGCNT] = 0; - /* Append Cause-Message if enabled */ - if (m->mdmreg[REG_RESPXT] & BIT_RESPXT) { - sprintf(s, "/%s", info->last_cause); - isdn_tty_at_cout(s, info); - } - break; - case RESULT_CONNECT64000: - /* Append Protocol to CONNECT message */ - switch (m->mdmreg[REG_L2PROT]) { - case ISDN_PROTO_L2_X75I: - case ISDN_PROTO_L2_X75UI: - case ISDN_PROTO_L2_X75BUI: - isdn_tty_at_cout("/X.75", info); - break; - case ISDN_PROTO_L2_HDLC: - isdn_tty_at_cout("/HDLC", info); - break; - case ISDN_PROTO_L2_V11096: - isdn_tty_at_cout("/V110/9600", info); - break; - case ISDN_PROTO_L2_V11019: - isdn_tty_at_cout("/V110/19200", info); - break; - case ISDN_PROTO_L2_V11038: - isdn_tty_at_cout("/V110/38400", info); - break; - } - if (m->mdmreg[REG_T70] & BIT_T70) { - isdn_tty_at_cout("/T.70", info); - if (m->mdmreg[REG_T70] & BIT_T70_EXT) - isdn_tty_at_cout("+", info); - } - break; - } - isdn_tty_at_cout("\r\n", info); - } - } - if (code == RESULT_NO_CARRIER) { - if (info->closing || (!info->port.tty)) - return; - - if (tty_port_check_carrier(&info->port)) - tty_hangup(info->port.tty); - } -} - - -/* - * Display a modem-register-value. - */ -static void -isdn_tty_show_profile(int ridx, modem_info *info) -{ - char v[6]; - - sprintf(v, "\r\n%d", info->emu.mdmreg[ridx]); - isdn_tty_at_cout(v, info); -} - -/* - * Get MSN-string from char-pointer, set pointer to end of number - */ -static void -isdn_tty_get_msnstr(char *n, char **p) -{ - int limit = ISDN_MSNLEN - 1; - - while (((*p[0] >= '0' && *p[0] <= '9') || - /* Why a comma ??? */ - (*p[0] == ',') || (*p[0] == ':')) && - (limit--)) - *n++ = *p[0]++; - *n = '\0'; -} - -/* - * Get phone-number from modem-commandbuffer - */ -static void -isdn_tty_getdial(char *p, char *q, int cnt) -{ - int first = 1; - int limit = ISDN_MSNLEN - 1; /* MUST match the size of interface var to avoid - buffer overflow */ - - while (strchr(" 0123456789,#.*WPTSR-", *p) && *p && --cnt > 0) { - if ((*p >= '0' && *p <= '9') || ((*p == 'S') && first) || - ((*p == 'R') && first) || - (*p == '*') || (*p == '#')) { - *q++ = *p; - limit--; - } - if (!limit) - break; - p++; - first = 0; - } - *q = 0; -} - -#define PARSE_ERROR { isdn_tty_modem_result(RESULT_ERROR, info); return; } -#define PARSE_ERROR1 { isdn_tty_modem_result(RESULT_ERROR, info); return 1; } - -static void -isdn_tty_report(modem_info *info) -{ - atemu *m = &info->emu; - char s[80]; - - isdn_tty_at_cout("\r\nStatistics of last connection:\r\n\r\n", info); - sprintf(s, " Remote Number: %s\r\n", info->last_num); - isdn_tty_at_cout(s, info); - sprintf(s, " Direction: %s\r\n", info->last_dir ? "outgoing" : "incoming"); - isdn_tty_at_cout(s, info); - isdn_tty_at_cout(" Layer-2 Protocol: ", info); - switch (info->last_l2) { - case ISDN_PROTO_L2_X75I: - isdn_tty_at_cout("X.75i", info); - break; - case ISDN_PROTO_L2_X75UI: - isdn_tty_at_cout("X.75ui", info); - break; - case ISDN_PROTO_L2_X75BUI: - isdn_tty_at_cout("X.75bui", info); - break; - case ISDN_PROTO_L2_HDLC: - isdn_tty_at_cout("HDLC", info); - break; - case ISDN_PROTO_L2_V11096: - isdn_tty_at_cout("V.110 9600 Baud", info); - break; - case ISDN_PROTO_L2_V11019: - isdn_tty_at_cout("V.110 19200 Baud", info); - break; - case ISDN_PROTO_L2_V11038: - isdn_tty_at_cout("V.110 38400 Baud", info); - break; - case ISDN_PROTO_L2_TRANS: - isdn_tty_at_cout("transparent", info); - break; - case ISDN_PROTO_L2_MODEM: - isdn_tty_at_cout("modem", info); - break; - case ISDN_PROTO_L2_FAX: - isdn_tty_at_cout("fax", info); - break; - default: - isdn_tty_at_cout("unknown", info); - break; - } - if (m->mdmreg[REG_T70] & BIT_T70) { - isdn_tty_at_cout("/T.70", info); - if (m->mdmreg[REG_T70] & BIT_T70_EXT) - isdn_tty_at_cout("+", info); - } - isdn_tty_at_cout("\r\n", info); - isdn_tty_at_cout(" Service: ", info); - switch (info->last_si) { - case 1: - isdn_tty_at_cout("audio\r\n", info); - break; - case 5: - isdn_tty_at_cout("btx\r\n", info); - break; - case 7: - isdn_tty_at_cout("data\r\n", info); - break; - default: - sprintf(s, "%d\r\n", info->last_si); - isdn_tty_at_cout(s, info); - break; - } - sprintf(s, " Hangup location: %s\r\n", info->last_lhup ? "local" : "remote"); - isdn_tty_at_cout(s, info); - sprintf(s, " Last cause: %s\r\n", info->last_cause); - isdn_tty_at_cout(s, info); -} - -/* - * Parse AT&.. commands. - */ -static int -isdn_tty_cmd_ATand(char **p, modem_info *info) -{ - atemu *m = &info->emu; - int i; - char rb[100]; - -#define MAXRB (sizeof(rb) - 1) - - switch (*p[0]) { - case 'B': - /* &B - Set Buffersize */ - p[0]++; - i = isdn_getnum(p); - if ((i < 0) || (i > ISDN_SERIAL_XMIT_MAX)) - PARSE_ERROR1; -#ifdef CONFIG_ISDN_AUDIO - if ((m->mdmreg[REG_SI1] & 1) && (i > VBUF)) - PARSE_ERROR1; -#endif - m->mdmreg[REG_PSIZE] = i / 16; - info->xmit_size = m->mdmreg[REG_PSIZE] * 16; - switch (m->mdmreg[REG_L2PROT]) { - case ISDN_PROTO_L2_V11096: - case ISDN_PROTO_L2_V11019: - case ISDN_PROTO_L2_V11038: - info->xmit_size /= 10; - } - break; - case 'C': - /* &C - DCD Status */ - p[0]++; - switch (isdn_getnum(p)) { - case 0: - m->mdmreg[REG_DCD] &= ~BIT_DCD; - break; - case 1: - m->mdmreg[REG_DCD] |= BIT_DCD; - break; - default: - PARSE_ERROR1 - } - break; - case 'D': - /* &D - Set DTR-Low-behavior */ - p[0]++; - switch (isdn_getnum(p)) { - case 0: - m->mdmreg[REG_DTRHUP] &= ~BIT_DTRHUP; - m->mdmreg[REG_DTRR] &= ~BIT_DTRR; - break; - case 2: - m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP; - m->mdmreg[REG_DTRR] &= ~BIT_DTRR; - break; - case 3: - m->mdmreg[REG_DTRHUP] |= BIT_DTRHUP; - m->mdmreg[REG_DTRR] |= BIT_DTRR; - break; - default: - PARSE_ERROR1 - } - break; - case 'E': - /* &E -Set EAZ/MSN */ - p[0]++; - isdn_tty_get_msnstr(m->msn, p); - break; - case 'F': - /* &F -Set Factory-Defaults */ - p[0]++; - if (info->msr & UART_MSR_DCD) - PARSE_ERROR1; - isdn_tty_reset_profile(m); - isdn_tty_modem_reset_regs(info, 1); - break; -#ifdef DUMMY_HAYES_AT - case 'K': - /* only for be compilant with common scripts */ - /* &K Flowcontrol - no function */ - p[0]++; - isdn_getnum(p); - break; -#endif - case 'L': - /* &L -Set Numbers to listen on */ - p[0]++; - i = 0; - while (*p[0] && (strchr("0123456789,-*[]?;", *p[0])) && - (i < ISDN_LMSNLEN - 1)) - m->lmsn[i++] = *p[0]++; - m->lmsn[i] = '\0'; - break; - case 'R': - /* &R - Set V.110 bitrate adaption */ - p[0]++; - i = isdn_getnum(p); - switch (i) { - case 0: - /* Switch off V.110, back to X.75 */ - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I; - m->mdmreg[REG_SI2] = 0; - info->xmit_size = m->mdmreg[REG_PSIZE] * 16; - break; - case 9600: - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11096; - m->mdmreg[REG_SI2] = 197; - info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10; - break; - case 19200: - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11019; - m->mdmreg[REG_SI2] = 199; - info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10; - break; - case 38400: - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_V11038; - m->mdmreg[REG_SI2] = 198; /* no existing standard for this */ - info->xmit_size = m->mdmreg[REG_PSIZE] * 16 / 10; - break; - default: - PARSE_ERROR1; - } - /* Switch off T.70 */ - m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT); - /* Set Service 7 */ - m->mdmreg[REG_SI1] |= 4; - break; - case 'S': - /* &S - Set Windowsize */ - p[0]++; - i = isdn_getnum(p); - if ((i > 0) && (i < 9)) - m->mdmreg[REG_WSIZE] = i; - else - PARSE_ERROR1; - break; - case 'V': - /* &V - Show registers */ - p[0]++; - isdn_tty_at_cout("\r\n", info); - for (i = 0; i < ISDN_MODEM_NUMREG; i++) { - sprintf(rb, "S%02d=%03d%s", i, - m->mdmreg[i], ((i + 1) % 10) ? " " : "\r\n"); - isdn_tty_at_cout(rb, info); - } - sprintf(rb, "\r\nEAZ/MSN: %.50s\r\n", - strlen(m->msn) ? m->msn : "None"); - isdn_tty_at_cout(rb, info); - if (strlen(m->lmsn)) { - isdn_tty_at_cout("\r\nListen: ", info); - isdn_tty_at_cout(m->lmsn, info); - isdn_tty_at_cout("\r\n", info); - } - break; - case 'W': - /* &W - Write Profile */ - p[0]++; - switch (*p[0]) { - case '0': - p[0]++; - modem_write_profile(m); - break; - default: - PARSE_ERROR1; - } - break; - case 'X': - /* &X - Switch to BTX-Mode and T.70 */ - p[0]++; - switch (isdn_getnum(p)) { - case 0: - m->mdmreg[REG_T70] &= ~(BIT_T70 | BIT_T70_EXT); - info->xmit_size = m->mdmreg[REG_PSIZE] * 16; - break; - case 1: - m->mdmreg[REG_T70] |= BIT_T70; - m->mdmreg[REG_T70] &= ~BIT_T70_EXT; - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I; - info->xmit_size = 112; - m->mdmreg[REG_SI1] = 4; - m->mdmreg[REG_SI2] = 0; - break; - case 2: - m->mdmreg[REG_T70] |= (BIT_T70 | BIT_T70_EXT); - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I; - info->xmit_size = 112; - m->mdmreg[REG_SI1] = 4; - m->mdmreg[REG_SI2] = 0; - break; - default: - PARSE_ERROR1; - } - break; - default: - PARSE_ERROR1; - } - return 0; -} - -static int -isdn_tty_check_ats(int mreg, int mval, modem_info *info, atemu *m) -{ - /* Some plausibility checks */ - switch (mreg) { - case REG_L2PROT: - if (mval > ISDN_PROTO_L2_MAX) - return 1; - break; - case REG_PSIZE: - if ((mval * 16) > ISDN_SERIAL_XMIT_MAX) - return 1; -#ifdef CONFIG_ISDN_AUDIO - if ((m->mdmreg[REG_SI1] & 1) && (mval > VBUFX)) - return 1; -#endif - info->xmit_size = mval * 16; - switch (m->mdmreg[REG_L2PROT]) { - case ISDN_PROTO_L2_V11096: - case ISDN_PROTO_L2_V11019: - case ISDN_PROTO_L2_V11038: - info->xmit_size /= 10; - } - break; - case REG_SI1I: - case REG_PLAN: - case REG_SCREEN: - /* readonly registers */ - return 1; - } - return 0; -} - -/* - * Perform ATS command - */ -static int -isdn_tty_cmd_ATS(char **p, modem_info *info) -{ - atemu *m = &info->emu; - int bitpos; - int mreg; - int mval; - int bval; - - mreg = isdn_getnum(p); - if (mreg < 0 || mreg >= ISDN_MODEM_NUMREG) - PARSE_ERROR1; - switch (*p[0]) { - case '=': - p[0]++; - mval = isdn_getnum(p); - if (mval < 0 || mval > 255) - PARSE_ERROR1; - if (isdn_tty_check_ats(mreg, mval, info, m)) - PARSE_ERROR1; - m->mdmreg[mreg] = mval; - break; - case '.': - /* Set/Clear a single bit */ - p[0]++; - bitpos = isdn_getnum(p); - if ((bitpos < 0) || (bitpos > 7)) - PARSE_ERROR1; - switch (*p[0]) { - case '=': - p[0]++; - bval = isdn_getnum(p); - if (bval < 0 || bval > 1) - PARSE_ERROR1; - if (bval) - mval = m->mdmreg[mreg] | (1 << bitpos); - else - mval = m->mdmreg[mreg] & ~(1 << bitpos); - if (isdn_tty_check_ats(mreg, mval, info, m)) - PARSE_ERROR1; - m->mdmreg[mreg] = mval; - break; - case '?': - p[0]++; - isdn_tty_at_cout("\r\n", info); - isdn_tty_at_cout((m->mdmreg[mreg] & (1 << bitpos)) ? "1" : "0", - info); - break; - default: - PARSE_ERROR1; - } - break; - case '?': - p[0]++; - isdn_tty_show_profile(mreg, info); - break; - default: - PARSE_ERROR1; - break; - } - return 0; -} - -/* - * Perform ATA command - */ -static void -isdn_tty_cmd_ATA(modem_info *info) -{ - atemu *m = &info->emu; - isdn_ctrl cmd; - int l2; - - if (info->msr & UART_MSR_RI) { - /* Accept incoming call */ - info->last_dir = 0; - strcpy(info->last_num, dev->num[info->drv_index]); - m->mdmreg[REG_RINGCNT] = 0; - info->msr &= ~UART_MSR_RI; - l2 = m->mdmreg[REG_L2PROT]; -#ifdef CONFIG_ISDN_AUDIO - /* If more than one bit set in reg18, autoselect Layer2 */ - if ((m->mdmreg[REG_SI1] & m->mdmreg[REG_SI1I]) != m->mdmreg[REG_SI1]) { - if (m->mdmreg[REG_SI1I] == 1) { - if ((l2 != ISDN_PROTO_L2_MODEM) && (l2 != ISDN_PROTO_L2_FAX)) - l2 = ISDN_PROTO_L2_TRANS; - } else - l2 = ISDN_PROTO_L2_X75I; - } -#endif - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETL2; - cmd.arg = info->isdn_channel + (l2 << 8); - info->last_l2 = l2; - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_SETL3; - cmd.arg = info->isdn_channel + (m->mdmreg[REG_L3PROT] << 8); -#ifdef CONFIG_ISDN_TTY_FAX - if (l2 == ISDN_PROTO_L2_FAX) { - cmd.parm.fax = info->fax; - info->fax->direction = ISDN_TTY_FAX_CONN_IN; - } -#endif - isdn_command(&cmd); - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - cmd.command = ISDN_CMD_ACCEPTD; - info->dialing = 16; - info->emu.carrierwait = 0; - isdn_command(&cmd); - isdn_timer_ctrl(ISDN_TIMER_CARRIER, 1); - } else - isdn_tty_modem_result(RESULT_NO_ANSWER, info); -} - -#ifdef CONFIG_ISDN_AUDIO -/* - * Parse AT+F.. commands - */ -static int -isdn_tty_cmd_PLUSF(char **p, modem_info *info) -{ - atemu *m = &info->emu; - char rs[20]; - - if (!strncmp(p[0], "CLASS", 5)) { - p[0] += 5; - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n%d", - (m->mdmreg[REG_SI1] & 1) ? 8 : 0); -#ifdef CONFIG_ISDN_TTY_FAX - if (TTY_IS_FCLASS2(info)) - sprintf(rs, "\r\n2"); - else if (TTY_IS_FCLASS1(info)) - sprintf(rs, "\r\n1"); -#endif - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - switch (*p[0]) { - case '0': - p[0]++; - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I; - m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS; - m->mdmreg[REG_SI1] = 4; - info->xmit_size = - m->mdmreg[REG_PSIZE] * 16; - break; -#ifdef CONFIG_ISDN_TTY_FAX - case '1': - p[0]++; - if (!(dev->global_features & - ISDN_FEATURE_L3_FCLASS1)) - PARSE_ERROR1; - m->mdmreg[REG_SI1] = 1; - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX; - m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS1; - info->xmit_size = - m->mdmreg[REG_PSIZE] * 16; - break; - case '2': - p[0]++; - if (!(dev->global_features & - ISDN_FEATURE_L3_FCLASS2)) - PARSE_ERROR1; - m->mdmreg[REG_SI1] = 1; - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_FAX; - m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_FCLASS2; - info->xmit_size = - m->mdmreg[REG_PSIZE] * 16; - break; -#endif - case '8': - p[0]++; - /* L2 will change on dialout with si=1 */ - m->mdmreg[REG_L2PROT] = ISDN_PROTO_L2_X75I; - m->mdmreg[REG_L3PROT] = ISDN_PROTO_L3_TRANS; - m->mdmreg[REG_SI1] = 5; - info->xmit_size = VBUF; - break; - case '?': - p[0]++; - strcpy(rs, "\r\n0,"); -#ifdef CONFIG_ISDN_TTY_FAX - if (dev->global_features & - ISDN_FEATURE_L3_FCLASS1) - strcat(rs, "1,"); - if (dev->global_features & - ISDN_FEATURE_L3_FCLASS2) - strcat(rs, "2,"); -#endif - strcat(rs, "8"); - isdn_tty_at_cout(rs, info); - break; - default: - PARSE_ERROR1; - } - break; - default: - PARSE_ERROR1; - } - return 0; - } -#ifdef CONFIG_ISDN_TTY_FAX - return (isdn_tty_cmd_PLUSF_FAX(p, info)); -#else - PARSE_ERROR1; -#endif -} - -/* - * Parse AT+V.. commands - */ -static int -isdn_tty_cmd_PLUSV(char **p, modem_info *info) -{ - atemu *m = &info->emu; - isdn_ctrl cmd; - static char *vcmd[] = - {"NH", "IP", "LS", "RX", "SD", "SM", "TX", "DD", NULL}; - int i; - int par1; - int par2; - char rs[20]; - - i = 0; - while (vcmd[i]) { - if (!strncmp(vcmd[i], p[0], 2)) { - p[0] += 2; - break; - } - i++; - } - switch (i) { - case 0: - /* AT+VNH - Auto hangup feature */ - switch (*p[0]) { - case '?': - p[0]++; - isdn_tty_at_cout("\r\n1", info); - break; - case '=': - p[0]++; - switch (*p[0]) { - case '1': - p[0]++; - break; - case '?': - p[0]++; - isdn_tty_at_cout("\r\n1", info); - break; - default: - PARSE_ERROR1; - } - break; - default: - PARSE_ERROR1; - } - break; - case 1: - /* AT+VIP - Reset all voice parameters */ - isdn_tty_modem_reset_vpar(m); - break; - case 2: - /* AT+VLS - Select device, accept incoming call */ - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n%d", m->vpar[0]); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - switch (*p[0]) { - case '0': - p[0]++; - m->vpar[0] = 0; - break; - case '2': - p[0]++; - m->vpar[0] = 2; - break; - case '?': - p[0]++; - isdn_tty_at_cout("\r\n0,2", info); - break; - default: - PARSE_ERROR1; - } - break; - default: - PARSE_ERROR1; - } - break; - case 3: - /* AT+VRX - Start recording */ - if (!m->vpar[0]) - PARSE_ERROR1; - if (info->online != 1) { - isdn_tty_modem_result(RESULT_NO_ANSWER, info); - return 1; - } - info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state); - if (!info->dtmf_state) { - printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n"); - PARSE_ERROR1; - } - info->silence_state = isdn_audio_silence_init(info->silence_state); - if (!info->silence_state) { - printk(KERN_WARNING "isdn_tty: Couldn't malloc silence state\n"); - PARSE_ERROR1; - } - if (m->vpar[3] < 5) { - info->adpcmr = isdn_audio_adpcm_init(info->adpcmr, m->vpar[3]); - if (!info->adpcmr) { - printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n"); - PARSE_ERROR1; - } - } -#ifdef ISDN_DEBUG_AT - printk(KERN_DEBUG "AT: +VRX\n"); -#endif - info->vonline |= 1; - isdn_tty_modem_result(RESULT_CONNECT, info); - return 0; - break; - case 4: - /* AT+VSD - Silence detection */ - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n<%d>,<%d>", - m->vpar[1], - m->vpar[2]); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if ((*p[0] >= '0') && (*p[0] <= '9')) { - par1 = isdn_getnum(p); - if ((par1 < 0) || (par1 > 31)) - PARSE_ERROR1; - if (*p[0] != ',') - PARSE_ERROR1; - p[0]++; - par2 = isdn_getnum(p); - if ((par2 < 0) || (par2 > 255)) - PARSE_ERROR1; - m->vpar[1] = par1; - m->vpar[2] = par2; - break; - } else - if (*p[0] == '?') { - p[0]++; - isdn_tty_at_cout("\r\n<0-31>,<0-255>", - info); - break; - } else - PARSE_ERROR1; - break; - default: - PARSE_ERROR1; - } - break; - case 5: - /* AT+VSM - Select compression */ - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n<%d>,<%d><8000>", - m->vpar[3], - m->vpar[1]); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - switch (*p[0]) { - case '2': - case '3': - case '4': - case '5': - case '6': - par1 = isdn_getnum(p); - if ((par1 < 2) || (par1 > 6)) - PARSE_ERROR1; - m->vpar[3] = par1; - break; - case '?': - p[0]++; - isdn_tty_at_cout("\r\n2;ADPCM;2;0;(8000)\r\n", - info); - isdn_tty_at_cout("3;ADPCM;3;0;(8000)\r\n", - info); - isdn_tty_at_cout("4;ADPCM;4;0;(8000)\r\n", - info); - isdn_tty_at_cout("5;ALAW;8;0;(8000)\r\n", - info); - isdn_tty_at_cout("6;ULAW;8;0;(8000)\r\n", - info); - break; - default: - PARSE_ERROR1; - } - break; - default: - PARSE_ERROR1; - } - break; - case 6: - /* AT+VTX - Start sending */ - if (!m->vpar[0]) - PARSE_ERROR1; - if (info->online != 1) { - isdn_tty_modem_result(RESULT_NO_ANSWER, info); - return 1; - } - info->dtmf_state = isdn_audio_dtmf_init(info->dtmf_state); - if (!info->dtmf_state) { - printk(KERN_WARNING "isdn_tty: Couldn't malloc dtmf state\n"); - PARSE_ERROR1; - } - if (m->vpar[3] < 5) { - info->adpcms = isdn_audio_adpcm_init(info->adpcms, m->vpar[3]); - if (!info->adpcms) { - printk(KERN_WARNING "isdn_tty: Couldn't malloc adpcm state\n"); - PARSE_ERROR1; - } - } -#ifdef ISDN_DEBUG_AT - printk(KERN_DEBUG "AT: +VTX\n"); -#endif - m->lastDLE = 0; - info->vonline |= 2; - isdn_tty_modem_result(RESULT_CONNECT, info); - return 0; - break; - case 7: - /* AT+VDD - DTMF detection */ - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n<%d>,<%d>", - m->vpar[4], - m->vpar[5]); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if ((*p[0] >= '0') && (*p[0] <= '9')) { - if (info->online != 1) - PARSE_ERROR1; - par1 = isdn_getnum(p); - if ((par1 < 0) || (par1 > 15)) - PARSE_ERROR1; - if (*p[0] != ',') - PARSE_ERROR1; - p[0]++; - par2 = isdn_getnum(p); - if ((par2 < 0) || (par2 > 255)) - PARSE_ERROR1; - m->vpar[4] = par1; - m->vpar[5] = par2; - cmd.driver = info->isdn_driver; - cmd.command = ISDN_CMD_AUDIO; - cmd.arg = info->isdn_channel + (ISDN_AUDIO_SETDD << 8); - cmd.parm.num[0] = par1; - cmd.parm.num[1] = par2; - isdn_command(&cmd); - break; - } else - if (*p[0] == '?') { - p[0]++; - isdn_tty_at_cout("\r\n<0-15>,<0-255>", - info); - break; - } else - PARSE_ERROR1; - break; - default: - PARSE_ERROR1; - } - break; - default: - PARSE_ERROR1; - } - return 0; -} -#endif /* CONFIG_ISDN_AUDIO */ - -/* - * Parse and perform an AT-command-line. - */ -static void -isdn_tty_parse_at(modem_info *info) -{ - atemu *m = &info->emu; - char *p; - char ds[ISDN_MSNLEN]; - -#ifdef ISDN_DEBUG_AT - printk(KERN_DEBUG "AT: '%s'\n", m->mdmcmd); -#endif - for (p = &m->mdmcmd[2]; *p;) { - switch (*p) { - case ' ': - p++; - break; - case 'A': - /* A - Accept incoming call */ - p++; - isdn_tty_cmd_ATA(info); - return; - case 'D': - /* D - Dial */ - if (info->msr & UART_MSR_DCD) - PARSE_ERROR; - if (info->msr & UART_MSR_RI) { - isdn_tty_modem_result(RESULT_NO_CARRIER, info); - return; - } - isdn_tty_getdial(++p, ds, sizeof ds); - p += strlen(p); - if (!strlen(m->msn)) - isdn_tty_modem_result(RESULT_NO_MSN_EAZ, info); - else if (strlen(ds)) - isdn_tty_dial(ds, info, m); - else - PARSE_ERROR; - return; - case 'E': - /* E - Turn Echo on/off */ - p++; - switch (isdn_getnum(&p)) { - case 0: - m->mdmreg[REG_ECHO] &= ~BIT_ECHO; - break; - case 1: - m->mdmreg[REG_ECHO] |= BIT_ECHO; - break; - default: - PARSE_ERROR; - } - break; - case 'H': - /* H - On/Off-hook */ - p++; - switch (*p) { - case '0': - p++; - isdn_tty_on_hook(info); - break; - case '1': - p++; - isdn_tty_off_hook(); - break; - default: - isdn_tty_on_hook(info); - break; - } - break; - case 'I': - /* I - Information */ - p++; - isdn_tty_at_cout("\r\nLinux ISDN", info); - switch (*p) { - case '0': - case '1': - p++; - break; - case '2': - p++; - isdn_tty_report(info); - break; - case '3': - p++; - snprintf(ds, sizeof(ds), "\r\n%d", info->emu.charge); - isdn_tty_at_cout(ds, info); - break; - default:; - } - break; -#ifdef DUMMY_HAYES_AT - case 'L': - case 'M': - /* only for be compilant with common scripts */ - /* no function */ - p++; - isdn_getnum(&p); - break; -#endif - case 'O': - /* O - Go online */ - p++; - if (info->msr & UART_MSR_DCD) - /* if B-Channel is up */ - isdn_tty_modem_result((m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM) ? RESULT_CONNECT : RESULT_CONNECT64000, info); - else - isdn_tty_modem_result(RESULT_NO_CARRIER, info); - return; - case 'Q': - /* Q - Turn Emulator messages on/off */ - p++; - switch (isdn_getnum(&p)) { - case 0: - m->mdmreg[REG_RESP] |= BIT_RESP; - break; - case 1: - m->mdmreg[REG_RESP] &= ~BIT_RESP; - break; - default: - PARSE_ERROR; - } - break; - case 'S': - /* S - Set/Get Register */ - p++; - if (isdn_tty_cmd_ATS(&p, info)) - return; - break; - case 'V': - /* V - Numeric or ASCII Emulator-messages */ - p++; - switch (isdn_getnum(&p)) { - case 0: - m->mdmreg[REG_RESP] |= BIT_RESPNUM; - break; - case 1: - m->mdmreg[REG_RESP] &= ~BIT_RESPNUM; - break; - default: - PARSE_ERROR; - } - break; - case 'Z': - /* Z - Load Registers from Profile */ - p++; - if (info->msr & UART_MSR_DCD) { - info->online = 0; - isdn_tty_on_hook(info); - } - isdn_tty_modem_reset_regs(info, 1); - break; - case '+': - p++; - switch (*p) { -#ifdef CONFIG_ISDN_AUDIO - case 'F': - p++; - if (isdn_tty_cmd_PLUSF(&p, info)) - return; - break; - case 'V': - if ((!(m->mdmreg[REG_SI1] & 1)) || - (m->mdmreg[REG_L2PROT] == ISDN_PROTO_L2_MODEM)) - PARSE_ERROR; - p++; - if (isdn_tty_cmd_PLUSV(&p, info)) - return; - break; -#endif /* CONFIG_ISDN_AUDIO */ - case 'S': /* SUSPEND */ - p++; - isdn_tty_get_msnstr(ds, &p); - isdn_tty_suspend(ds, info, m); - break; - case 'R': /* RESUME */ - p++; - isdn_tty_get_msnstr(ds, &p); - isdn_tty_resume(ds, info, m); - break; - case 'M': /* MESSAGE */ - p++; - isdn_tty_send_msg(info, m, p); - break; - default: - PARSE_ERROR; - } - break; - case '&': - p++; - if (isdn_tty_cmd_ATand(&p, info)) - return; - break; - default: - PARSE_ERROR; - } - } -#ifdef CONFIG_ISDN_AUDIO - if (!info->vonline) -#endif - isdn_tty_modem_result(RESULT_OK, info); -} - -/* Need own toupper() because standard-toupper is not available - * within modules. - */ -#define my_toupper(c) (((c >= 'a') && (c <= 'z')) ? (c & 0xdf) : c) - -/* - * Perform line-editing of AT-commands - * - * Parameters: - * p inputbuffer - * count length of buffer - * channel index to line (minor-device) - */ -static int -isdn_tty_edit_at(const char *p, int count, modem_info *info) -{ - atemu *m = &info->emu; - int total = 0; - u_char c; - char eb[2]; - int cnt; - - for (cnt = count; cnt > 0; p++, cnt--) { - c = *p; - total++; - if (c == m->mdmreg[REG_CR] || c == m->mdmreg[REG_LF]) { - /* Separator (CR or LF) */ - m->mdmcmd[m->mdmcmdl] = 0; - if (m->mdmreg[REG_ECHO] & BIT_ECHO) { - eb[0] = c; - eb[1] = 0; - isdn_tty_at_cout(eb, info); - } - if ((m->mdmcmdl >= 2) && (!(strncmp(m->mdmcmd, "AT", 2)))) - isdn_tty_parse_at(info); - m->mdmcmdl = 0; - continue; - } - if (c == m->mdmreg[REG_BS] && m->mdmreg[REG_BS] < 128) { - /* Backspace-Function */ - if ((m->mdmcmdl > 2) || (!m->mdmcmdl)) { - if (m->mdmcmdl) - m->mdmcmdl--; - if (m->mdmreg[REG_ECHO] & BIT_ECHO) - isdn_tty_at_cout("\b", info); - } - continue; - } - if (cmdchar(c)) { - if (m->mdmreg[REG_ECHO] & BIT_ECHO) { - eb[0] = c; - eb[1] = 0; - isdn_tty_at_cout(eb, info); - } - if (m->mdmcmdl < 255) { - c = my_toupper(c); - switch (m->mdmcmdl) { - case 1: - if (c == 'T') { - m->mdmcmd[m->mdmcmdl] = c; - m->mdmcmd[++m->mdmcmdl] = 0; - break; - } else - m->mdmcmdl = 0; - /* Fall through - check for 'A' */ - case 0: - if (c == 'A') { - m->mdmcmd[m->mdmcmdl] = c; - m->mdmcmd[++m->mdmcmdl] = 0; - } - break; - default: - m->mdmcmd[m->mdmcmdl] = c; - m->mdmcmd[++m->mdmcmdl] = 0; - } - } - } - } - return total; -} - -/* - * Switch all modem-channels who are online and got a valid - * escape-sequence 1.5 seconds ago, to command-mode. - * This function is called every second via timer-interrupt from within - * timer-dispatcher isdn_timer_function() - */ -void -isdn_tty_modem_escape(void) -{ - int ton = 0; - int i; - int midx; - - for (i = 0; i < ISDN_MAX_CHANNELS; i++) - if (USG_MODEM(dev->usage[i]) && (midx = dev->m_idx[i]) >= 0) { - modem_info *info = &dev->mdm.info[midx]; - if (info->online) { - ton = 1; - if ((info->emu.pluscount == 3) && - time_after(jiffies, - info->emu.lastplus + PLUSWAIT2)) { - info->emu.pluscount = 0; - info->online = 0; - isdn_tty_modem_result(RESULT_OK, info); - } - } - } - isdn_timer_ctrl(ISDN_TIMER_MODEMPLUS, ton); -} - -/* - * Put a RING-message to all modem-channels who have the RI-bit set. - * This function is called every second via timer-interrupt from within - * timer-dispatcher isdn_timer_function() - */ -void -isdn_tty_modem_ring(void) -{ - int ton = 0; - int i; - - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - modem_info *info = &dev->mdm.info[i]; - if (info->msr & UART_MSR_RI) { - ton = 1; - isdn_tty_modem_result(RESULT_RING, info); - } - } - isdn_timer_ctrl(ISDN_TIMER_MODEMRING, ton); -} - -/* - * For all online tty's, try sending data to - * the lower levels. - */ -void -isdn_tty_modem_xmit(void) -{ - int ton = 1; - int i; - - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - modem_info *info = &dev->mdm.info[i]; - if (info->online) { - ton = 1; - isdn_tty_senddown(info); - isdn_tty_tint(info); - } - } - isdn_timer_ctrl(ISDN_TIMER_MODEMXMIT, ton); -} - -/* - * Check all channels if we have a 'no carrier' timeout. - * Timeout value is set by Register S7. - */ -void -isdn_tty_carrier_timeout(void) -{ - int ton = 0; - int i; - - for (i = 0; i < ISDN_MAX_CHANNELS; i++) { - modem_info *info = &dev->mdm.info[i]; - if (!info->dialing) - continue; - if (info->emu.carrierwait++ > info->emu.mdmreg[REG_WAITC]) { - info->dialing = 0; - isdn_tty_modem_result(RESULT_NO_CARRIER, info); - isdn_tty_modem_hup(info, 1); - } else - ton = 1; - } - isdn_timer_ctrl(ISDN_TIMER_CARRIER, ton); -} diff --git a/drivers/isdn/i4l/isdn_tty.h b/drivers/isdn/i4l/isdn_tty.h deleted file mode 100644 index a6f801d2263b..000000000000 --- a/drivers/isdn/i4l/isdn_tty.h +++ /dev/null @@ -1,120 +0,0 @@ -/* $Id: isdn_tty.h,v 1.1.2.2 2004/01/12 22:37:19 keil Exp $ - * - * header for Linux ISDN subsystem, tty related functions (linklevel). - * - * Copyright 1994-1999 by Fritz Elfert (fritz@isdn4linux.de) - * Copyright 1995,96 by Thinking Objects Software GmbH Wuerzburg - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - - -#define DLE 0x10 -#define ETX 0x03 -#define DC4 0x14 - - -/* - * Definition of some special Registers of AT-Emulator - */ -#define REG_RINGATA 0 -#define REG_RINGCNT 1 /* ring counter register */ -#define REG_ESC 2 -#define REG_CR 3 -#define REG_LF 4 -#define REG_BS 5 - -#define REG_WAITC 7 - -#define REG_RESP 12 /* show response messages register */ -#define BIT_RESP 1 /* show response messages bit */ -#define REG_RESPNUM 12 /* show numeric responses register */ -#define BIT_RESPNUM 2 /* show numeric responses bit */ -#define REG_ECHO 12 -#define BIT_ECHO 4 -#define REG_DCD 12 -#define BIT_DCD 8 -#define REG_CTS 12 -#define BIT_CTS 16 -#define REG_DTRR 12 -#define BIT_DTRR 32 -#define REG_DSR 12 -#define BIT_DSR 64 -#define REG_CPPP 12 -#define BIT_CPPP 128 - -#define REG_DXMT 13 -#define BIT_DXMT 1 -#define REG_T70 13 -#define BIT_T70 2 -#define BIT_T70_EXT 32 -#define REG_DTRHUP 13 -#define BIT_DTRHUP 4 -#define REG_RESPXT 13 -#define BIT_RESPXT 8 -#define REG_CIDONCE 13 -#define BIT_CIDONCE 16 -#define REG_RUNG 13 /* show RUNG message register */ -#define BIT_RUNG 64 /* show RUNG message bit */ -#define REG_DISPLAY 13 -#define BIT_DISPLAY 128 - -#define REG_L2PROT 14 -#define REG_L3PROT 15 -#define REG_PSIZE 16 -#define REG_WSIZE 17 -#define REG_SI1 18 -#define REG_SI2 19 -#define REG_SI1I 20 -#define REG_PLAN 21 -#define REG_SCREEN 22 - -#define REG_CPN 23 -#define BIT_CPN 1 -#define REG_CPNFCON 23 -#define BIT_CPNFCON 2 -#define REG_CDN 23 -#define BIT_CDN 4 - -/* defines for result codes */ -#define RESULT_OK 0 -#define RESULT_CONNECT 1 -#define RESULT_RING 2 -#define RESULT_NO_CARRIER 3 -#define RESULT_ERROR 4 -#define RESULT_CONNECT64000 5 -#define RESULT_NO_DIALTONE 6 -#define RESULT_BUSY 7 -#define RESULT_NO_ANSWER 8 -#define RESULT_RINGING 9 -#define RESULT_NO_MSN_EAZ 10 -#define RESULT_VCON 11 -#define RESULT_RUNG 12 - -#define TTY_IS_FCLASS1(info) \ - ((info->emu.mdmreg[REG_L2PROT] == ISDN_PROTO_L2_FAX) && \ - (info->emu.mdmreg[REG_L3PROT] == ISDN_PROTO_L3_FCLASS1)) -#define TTY_IS_FCLASS2(info) \ - ((info->emu.mdmreg[REG_L2PROT] == ISDN_PROTO_L2_FAX) && \ - (info->emu.mdmreg[REG_L3PROT] == ISDN_PROTO_L3_FCLASS2)) - -extern void isdn_tty_modem_escape(void); -extern void isdn_tty_modem_ring(void); -extern void isdn_tty_carrier_timeout(void); -extern void isdn_tty_modem_xmit(void); -extern int isdn_tty_modem_init(void); -extern void isdn_tty_exit(void); -extern void isdn_tty_readmodem(void); -extern int isdn_tty_find_icall(int, int, setup_parm *); -extern int isdn_tty_stat_callback(int, isdn_ctrl *); -extern int isdn_tty_rcv_skb(int, int, int, struct sk_buff *); -extern int isdn_tty_capi_facility(capi_msg *cm); -extern void isdn_tty_at_cout(char *, modem_info *); -extern void isdn_tty_modem_hup(modem_info *, int); -#ifdef CONFIG_ISDN_TTY_FAX -extern int isdn_tty_cmd_PLUSF_FAX(char **, modem_info *); -extern int isdn_tty_fax_command(modem_info *, isdn_ctrl *); -extern void isdn_tty_fax_bitorder(modem_info *, struct sk_buff *); -#endif diff --git a/drivers/isdn/i4l/isdn_ttyfax.c b/drivers/isdn/i4l/isdn_ttyfax.c deleted file mode 100644 index 47aae4916730..000000000000 --- a/drivers/isdn/i4l/isdn_ttyfax.c +++ /dev/null @@ -1,1123 +0,0 @@ -/* $Id: isdn_ttyfax.c,v 1.1.2.2 2004/01/12 22:37:19 keil Exp $ - * - * Linux ISDN subsystem, tty_fax AT-command emulator (linklevel). - * - * Copyright 1999 by Armin Schindler (mac@melware.de) - * Copyright 1999 by Ralf Spachmann (mel@melware.de) - * Copyright 1999 by Cytronics & Melware - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#undef ISDN_TTY_FAX_STAT_DEBUG -#undef ISDN_TTY_FAX_CMD_DEBUG - -#include -#include "isdn_common.h" -#include "isdn_tty.h" -#include "isdn_ttyfax.h" - - -static char *isdn_tty_fax_revision = "$Revision: 1.1.2.2 $"; - -#define PARSE_ERROR1 { isdn_tty_fax_modem_result(1, info); return 1; } - -static char * -isdn_getrev(const char *revision) -{ - char *rev; - char *p; - - if ((p = strchr(revision, ':'))) { - rev = p + 2; - p = strchr(rev, '$'); - *--p = 0; - } else - rev = "???"; - return rev; -} - -/* - * Fax Class 2 Modem results - * - */ - -static void -isdn_tty_fax_modem_result(int code, modem_info *info) -{ - atemu *m = &info->emu; - T30_s *f = info->fax; - char rs[50]; - char rss[50]; - char *rp; - int i; - static char *msg[] = - {"OK", "ERROR", "+FCON", "+FCSI:", "+FDIS:", - "+FHNG:", "+FDCS:", "CONNECT", "+FTSI:", - "+FCFR", "+FPTS:", "+FET:"}; - - - isdn_tty_at_cout("\r\n", info); - isdn_tty_at_cout(msg[code], info); - -#ifdef ISDN_TTY_FAX_CMD_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax send %s on ttyI%d\n", - msg[code], info->line); -#endif - switch (code) { - case 0: /* OK */ - break; - case 1: /* ERROR */ - break; - case 2: /* +FCON */ - /* Append CPN, if enabled */ - if ((m->mdmreg[REG_CPNFCON] & BIT_CPNFCON) && - (!(dev->usage[info->isdn_channel] & ISDN_USAGE_OUTGOING))) { - sprintf(rs, "/%s", m->cpn); - isdn_tty_at_cout(rs, info); - } - info->online = 1; - f->fet = 0; - if (f->phase == ISDN_FAX_PHASE_A) - f->phase = ISDN_FAX_PHASE_B; - break; - case 3: /* +FCSI */ - case 8: /* +FTSI */ - sprintf(rs, "\"%s\"", f->r_id); - isdn_tty_at_cout(rs, info); - break; - case 4: /* +FDIS */ - rs[0] = 0; - rp = &f->r_resolution; - for (i = 0; i < 8; i++) { - sprintf(rss, "%c%s", rp[i] + 48, - (i < 7) ? "," : ""); - strcat(rs, rss); - } - isdn_tty_at_cout(rs, info); -#ifdef ISDN_TTY_FAX_CMD_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax DIS=%s on ttyI%d\n", - rs, info->line); -#endif - break; - case 5: /* +FHNG */ - sprintf(rs, "%d", f->code); - isdn_tty_at_cout(rs, info); - info->faxonline = 0; - break; - case 6: /* +FDCS */ - rs[0] = 0; - rp = &f->r_resolution; - for (i = 0; i < 8; i++) { - sprintf(rss, "%c%s", rp[i] + 48, - (i < 7) ? "," : ""); - strcat(rs, rss); - } - isdn_tty_at_cout(rs, info); -#ifdef ISDN_TTY_FAX_CMD_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax DCS=%s on ttyI%d\n", - rs, info->line); -#endif - break; - case 7: /* CONNECT */ - info->faxonline |= 2; - break; - case 9: /* FCFR */ - break; - case 10: /* FPTS */ - isdn_tty_at_cout("1", info); - break; - case 11: /* FET */ - sprintf(rs, "%d", f->fet); - isdn_tty_at_cout(rs, info); - break; - } - - isdn_tty_at_cout("\r\n", info); - - switch (code) { - case 7: /* CONNECT */ - info->online = 2; - if (info->faxonline & 1) { - sprintf(rs, "%c", XON); - isdn_tty_at_cout(rs, info); - } - break; - } -} - -static int -isdn_tty_fax_command1(modem_info *info, isdn_ctrl *c) -{ - static char *msg[] = - {"OK", "CONNECT", "NO CARRIER", "ERROR", "FCERROR"}; - -#ifdef ISDN_TTY_FAX_CMD_DEBUG - printk(KERN_DEBUG "isdn_tty: FCLASS1 cmd(%d)\n", c->parm.aux.cmd); -#endif - if (c->parm.aux.cmd < ISDN_FAX_CLASS1_QUERY) { - if (info->online) - info->online = 1; - isdn_tty_at_cout("\r\n", info); - isdn_tty_at_cout(msg[c->parm.aux.cmd], info); - isdn_tty_at_cout("\r\n", info); - } - switch (c->parm.aux.cmd) { - case ISDN_FAX_CLASS1_CONNECT: - info->online = 2; - break; - case ISDN_FAX_CLASS1_OK: - case ISDN_FAX_CLASS1_FCERROR: - case ISDN_FAX_CLASS1_ERROR: - case ISDN_FAX_CLASS1_NOCARR: - break; - case ISDN_FAX_CLASS1_QUERY: - isdn_tty_at_cout("\r\n", info); - if (!c->parm.aux.para[0]) { - isdn_tty_at_cout(msg[ISDN_FAX_CLASS1_ERROR], info); - isdn_tty_at_cout("\r\n", info); - } else { - isdn_tty_at_cout(c->parm.aux.para, info); - isdn_tty_at_cout("\r\nOK\r\n", info); - } - break; - } - return (0); -} - -int -isdn_tty_fax_command(modem_info *info, isdn_ctrl *c) -{ - T30_s *f = info->fax; - char rs[10]; - - if (TTY_IS_FCLASS1(info)) - return (isdn_tty_fax_command1(info, c)); - -#ifdef ISDN_TTY_FAX_CMD_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax cmd %d on ttyI%d\n", - f->r_code, info->line); -#endif - switch (f->r_code) { - case ISDN_TTY_FAX_FCON: - info->faxonline = 1; - isdn_tty_fax_modem_result(2, info); /* +FCON */ - return (0); - case ISDN_TTY_FAX_FCON_I: - info->faxonline = 16; - isdn_tty_fax_modem_result(2, info); /* +FCON */ - return (0); - case ISDN_TTY_FAX_RID: - if (info->faxonline & 1) - isdn_tty_fax_modem_result(3, info); /* +FCSI */ - if (info->faxonline & 16) - isdn_tty_fax_modem_result(8, info); /* +FTSI */ - return (0); - case ISDN_TTY_FAX_DIS: - isdn_tty_fax_modem_result(4, info); /* +FDIS */ - return (0); - case ISDN_TTY_FAX_HNG: - if (f->phase == ISDN_FAX_PHASE_C) { - if (f->direction == ISDN_TTY_FAX_CONN_IN) { - sprintf(rs, "%c%c", DLE, ETX); - isdn_tty_at_cout(rs, info); - } else { - sprintf(rs, "%c", 0x18); - isdn_tty_at_cout(rs, info); - } - info->faxonline &= ~2; /* leave data mode */ - info->online = 1; - } - f->phase = ISDN_FAX_PHASE_E; - isdn_tty_fax_modem_result(5, info); /* +FHNG */ - isdn_tty_fax_modem_result(0, info); /* OK */ - return (0); - case ISDN_TTY_FAX_DCS: - isdn_tty_fax_modem_result(6, info); /* +FDCS */ - isdn_tty_fax_modem_result(7, info); /* CONNECT */ - f->phase = ISDN_FAX_PHASE_C; - return (0); - case ISDN_TTY_FAX_TRAIN_OK: - isdn_tty_fax_modem_result(6, info); /* +FDCS */ - isdn_tty_fax_modem_result(0, info); /* OK */ - return (0); - case ISDN_TTY_FAX_SENT: - isdn_tty_fax_modem_result(0, info); /* OK */ - return (0); - case ISDN_TTY_FAX_CFR: - isdn_tty_fax_modem_result(9, info); /* +FCFR */ - return (0); - case ISDN_TTY_FAX_ET: - sprintf(rs, "%c%c", DLE, ETX); - isdn_tty_at_cout(rs, info); - isdn_tty_fax_modem_result(10, info); /* +FPTS */ - isdn_tty_fax_modem_result(11, info); /* +FET */ - isdn_tty_fax_modem_result(0, info); /* OK */ - info->faxonline &= ~2; /* leave data mode */ - info->online = 1; - f->phase = ISDN_FAX_PHASE_D; - return (0); - case ISDN_TTY_FAX_PTS: - isdn_tty_fax_modem_result(10, info); /* +FPTS */ - if (f->direction == ISDN_TTY_FAX_CONN_OUT) { - if (f->fet == 1) - f->phase = ISDN_FAX_PHASE_B; - if (f->fet == 0) - isdn_tty_fax_modem_result(0, info); /* OK */ - } - return (0); - case ISDN_TTY_FAX_EOP: - info->faxonline &= ~2; /* leave data mode */ - info->online = 1; - f->phase = ISDN_FAX_PHASE_D; - return (0); - - } - return (-1); -} - - -void -isdn_tty_fax_bitorder(modem_info *info, struct sk_buff *skb) -{ - __u8 LeftMask; - __u8 RightMask; - __u8 fBit; - __u8 Data; - int i; - - if (!info->fax->bor) { - for (i = 0; i < skb->len; i++) { - Data = skb->data[i]; - for ( - LeftMask = 0x80, RightMask = 0x01; - LeftMask > RightMask; - LeftMask >>= 1, RightMask <<= 1 - ) { - fBit = (Data & LeftMask); - if (Data & RightMask) - Data |= LeftMask; - else - Data &= ~LeftMask; - if (fBit) - Data |= RightMask; - else - Data &= ~RightMask; - - } - skb->data[i] = Data; - } - } -} - -/* - * Parse AT+F.. FAX class 1 commands - */ - -static int -isdn_tty_cmd_FCLASS1(char **p, modem_info *info) -{ - static char *cmd[] = - {"AE", "TS", "RS", "TM", "RM", "TH", "RH"}; - isdn_ctrl c; - int par, i; - u_long flags; - - for (c.parm.aux.cmd = 0; c.parm.aux.cmd < 7; c.parm.aux.cmd++) - if (!strncmp(p[0], cmd[c.parm.aux.cmd], 2)) - break; - -#ifdef ISDN_TTY_FAX_CMD_DEBUG - printk(KERN_DEBUG "isdn_tty_cmd_FCLASS1 (%s,%d)\n", p[0], c.parm.aux.cmd); -#endif - if (c.parm.aux.cmd == 7) - PARSE_ERROR1; - - p[0] += 2; - switch (*p[0]) { - case '?': - p[0]++; - c.parm.aux.subcmd = AT_QUERY; - break; - case '=': - p[0]++; - if (*p[0] == '?') { - p[0]++; - c.parm.aux.subcmd = AT_EQ_QUERY; - } else { - par = isdn_getnum(p); - if ((par < 0) || (par > 255)) - PARSE_ERROR1; - c.parm.aux.subcmd = AT_EQ_VALUE; - c.parm.aux.para[0] = par; - } - break; - case 0: - c.parm.aux.subcmd = AT_COMMAND; - break; - default: - PARSE_ERROR1; - } - c.command = ISDN_CMD_FAXCMD; -#ifdef ISDN_TTY_FAX_CMD_DEBUG - printk(KERN_DEBUG "isdn_tty_cmd_FCLASS1 %d/%d/%d)\n", - c.parm.aux.cmd, c.parm.aux.subcmd, c.parm.aux.para[0]); -#endif - if (info->isdn_driver < 0) { - if ((c.parm.aux.subcmd == AT_EQ_VALUE) || - (c.parm.aux.subcmd == AT_COMMAND)) { - PARSE_ERROR1; - } - spin_lock_irqsave(&dev->lock, flags); - /* get a temporary connection to the first free fax driver */ - i = isdn_get_free_channel(ISDN_USAGE_FAX, ISDN_PROTO_L2_FAX, - ISDN_PROTO_L3_FCLASS1, -1, -1, "00"); - if (i < 0) { - spin_unlock_irqrestore(&dev->lock, flags); - PARSE_ERROR1; - } - info->isdn_driver = dev->drvmap[i]; - info->isdn_channel = dev->chanmap[i]; - info->drv_index = i; - dev->m_idx[i] = info->line; - spin_unlock_irqrestore(&dev->lock, flags); - c.driver = info->isdn_driver; - c.arg = info->isdn_channel; - isdn_command(&c); - spin_lock_irqsave(&dev->lock, flags); - isdn_free_channel(info->isdn_driver, info->isdn_channel, - ISDN_USAGE_FAX); - info->isdn_driver = -1; - info->isdn_channel = -1; - if (info->drv_index >= 0) { - dev->m_idx[info->drv_index] = -1; - info->drv_index = -1; - } - spin_unlock_irqrestore(&dev->lock, flags); - } else { - c.driver = info->isdn_driver; - c.arg = info->isdn_channel; - isdn_command(&c); - } - return 1; -} - -/* - * Parse AT+F.. FAX class 2 commands - */ - -static int -isdn_tty_cmd_FCLASS2(char **p, modem_info *info) -{ - atemu *m = &info->emu; - T30_s *f = info->fax; - isdn_ctrl cmd; - int par; - char rs[50]; - char rss[50]; - int maxdccval[] = - {1, 5, 2, 2, 3, 2, 0, 7}; - - /* FAA still unchanged */ - if (!strncmp(p[0], "AA", 2)) { /* TODO */ - p[0] += 2; - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n%d", 0); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - par = isdn_getnum(p); - if ((par < 0) || (par > 255)) - PARSE_ERROR1; - break; - default: - PARSE_ERROR1; - } - return 0; - } - /* BADLIN=value - dummy 0=disable errorchk disabled, 1-255 nr. of lines for making page bad */ - if (!strncmp(p[0], "BADLIN", 6)) { - p[0] += 6; - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n%d", f->badlin); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if (*p[0] == '?') { - p[0]++; - sprintf(rs, "\r\n0-255"); - isdn_tty_at_cout(rs, info); - } else { - par = isdn_getnum(p); - if ((par < 0) || (par > 255)) - PARSE_ERROR1; - f->badlin = par; -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax FBADLIN=%d\n", par); -#endif - } - break; - default: - PARSE_ERROR1; - } - return 0; - } - /* BADMUL=value - dummy 0=disable errorchk disabled (threshold multiplier) */ - if (!strncmp(p[0], "BADMUL", 6)) { - p[0] += 6; - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n%d", f->badmul); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if (*p[0] == '?') { - p[0]++; - sprintf(rs, "\r\n0-255"); - isdn_tty_at_cout(rs, info); - } else { - par = isdn_getnum(p); - if ((par < 0) || (par > 255)) - PARSE_ERROR1; - f->badmul = par; -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax FBADMUL=%d\n", par); -#endif - } - break; - default: - PARSE_ERROR1; - } - return 0; - } - /* BOR=n - Phase C bit order, 0=direct, 1=reverse */ - if (!strncmp(p[0], "BOR", 3)) { - p[0] += 3; - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n%d", f->bor); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if (*p[0] == '?') { - p[0]++; - sprintf(rs, "\r\n0,1"); - isdn_tty_at_cout(rs, info); - } else { - par = isdn_getnum(p); - if ((par < 0) || (par > 1)) - PARSE_ERROR1; - f->bor = par; -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax FBOR=%d\n", par); -#endif - } - break; - default: - PARSE_ERROR1; - } - return 0; - } - /* NBC=n - No Best Capabilities */ - if (!strncmp(p[0], "NBC", 3)) { - p[0] += 3; - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n%d", f->nbc); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if (*p[0] == '?') { - p[0]++; - sprintf(rs, "\r\n0,1"); - isdn_tty_at_cout(rs, info); - } else { - par = isdn_getnum(p); - if ((par < 0) || (par > 1)) - PARSE_ERROR1; - f->nbc = par; -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax FNBC=%d\n", par); -#endif - } - break; - default: - PARSE_ERROR1; - } - return 0; - } - /* BUF? - Readonly buffersize readout */ - if (!strncmp(p[0], "BUF?", 4)) { - p[0] += 4; -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax FBUF? (%d) \n", (16 * m->mdmreg[REG_PSIZE])); -#endif - p[0]++; - sprintf(rs, "\r\n %d ", (16 * m->mdmreg[REG_PSIZE])); - isdn_tty_at_cout(rs, info); - return 0; - } - /* CIG=string - local fax station id string for polling rx */ - if (!strncmp(p[0], "CIG", 3)) { - int i, r; - p[0] += 3; - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n\"%s\"", f->pollid); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if (*p[0] == '?') { - p[0]++; - sprintf(rs, "\r\n\"STRING\""); - isdn_tty_at_cout(rs, info); - } else { - if (*p[0] == '"') - p[0]++; - for (i = 0; (*p[0]) && i < (FAXIDLEN - 1) && (*p[0] != '"'); i++) { - f->pollid[i] = *p[0]++; - } - if (*p[0] == '"') - p[0]++; - for (r = i; r < FAXIDLEN; r++) { - f->pollid[r] = 32; - } - f->pollid[FAXIDLEN - 1] = 0; -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax local poll ID rx \"%s\"\n", f->pollid); -#endif - } - break; - default: - PARSE_ERROR1; - } - return 0; - } - /* CQ=n - copy qlty chk, 0= no chk, 1=only 1D chk, 2=1D+2D chk */ - if (!strncmp(p[0], "CQ", 2)) { - p[0] += 2; - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n%d", f->cq); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if (*p[0] == '?') { - p[0]++; - sprintf(rs, "\r\n0,1,2"); - isdn_tty_at_cout(rs, info); - } else { - par = isdn_getnum(p); - if ((par < 0) || (par > 2)) - PARSE_ERROR1; - f->cq = par; -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax FCQ=%d\n", par); -#endif - } - break; - default: - PARSE_ERROR1; - } - return 0; - } - /* CR=n - can receive? 0= no data rx or poll remote dev, 1=do receive data or poll remote dev */ - if (!strncmp(p[0], "CR", 2)) { - p[0] += 2; - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n%d", f->cr); /* read actual value from struct and print */ - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if (*p[0] == '?') { - p[0]++; - sprintf(rs, "\r\n0,1"); /* display online help */ - isdn_tty_at_cout(rs, info); - } else { - par = isdn_getnum(p); - if ((par < 0) || (par > 1)) - PARSE_ERROR1; - f->cr = par; -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax FCR=%d\n", par); -#endif - } - break; - default: - PARSE_ERROR1; - } - return 0; - } - /* CTCRTY=value - ECM retry count */ - if (!strncmp(p[0], "CTCRTY", 6)) { - p[0] += 6; - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n%d", f->ctcrty); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if (*p[0] == '?') { - p[0]++; - sprintf(rs, "\r\n0-255"); - isdn_tty_at_cout(rs, info); - } else { - par = isdn_getnum(p); - if ((par < 0) || (par > 255)) - PARSE_ERROR1; - f->ctcrty = par; -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax FCTCRTY=%d\n", par); -#endif - } - break; - default: - PARSE_ERROR1; - } - return 0; - } - /* DCC=vr,br,wd,ln,df,ec,bf,st - DCE capabilities parms */ - if (!strncmp(p[0], "DCC", 3)) { - char *rp = &f->resolution; - int i; - - p[0] += 3; - switch (*p[0]) { - case '?': - p[0]++; - strcpy(rs, "\r\n"); - for (i = 0; i < 8; i++) { - sprintf(rss, "%c%s", rp[i] + 48, - (i < 7) ? "," : ""); - strcat(rs, rss); - } - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if (*p[0] == '?') { - isdn_tty_at_cout("\r\n(0,1),(0-5),(0-2),(0-2),(0-3),(0-2),(0),(0-7)", info); - p[0]++; - } else { - for (i = 0; (((*p[0] >= '0') && (*p[0] <= '9')) || (*p[0] == ',')) && (i < 8); i++) { - if (*p[0] != ',') { - if ((*p[0] - 48) > maxdccval[i]) { - PARSE_ERROR1; - } - rp[i] = *p[0] - 48; - p[0]++; - if (*p[0] == ',') - p[0]++; - } else - p[0]++; - } -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax FDCC capabilities DCE=%d,%d,%d,%d,%d,%d,%d,%d\n", - rp[0], rp[1], rp[2], rp[3], rp[4], rp[5], rp[6], rp[7]); -#endif - } - break; - default: - PARSE_ERROR1; - } - return 0; - } - /* DIS=vr,br,wd,ln,df,ec,bf,st - current session parms */ - if (!strncmp(p[0], "DIS", 3)) { - char *rp = &f->resolution; - int i; - - p[0] += 3; - switch (*p[0]) { - case '?': - p[0]++; - strcpy(rs, "\r\n"); - for (i = 0; i < 8; i++) { - sprintf(rss, "%c%s", rp[i] + 48, - (i < 7) ? "," : ""); - strcat(rs, rss); - } - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if (*p[0] == '?') { - isdn_tty_at_cout("\r\n(0,1),(0-5),(0-2),(0-2),(0-3),(0-2),(0),(0-7)", info); - p[0]++; - } else { - for (i = 0; (((*p[0] >= '0') && (*p[0] <= '9')) || (*p[0] == ',')) && (i < 8); i++) { - if (*p[0] != ',') { - if ((*p[0] - 48) > maxdccval[i]) { - PARSE_ERROR1; - } - rp[i] = *p[0] - 48; - p[0]++; - if (*p[0] == ',') - p[0]++; - } else - p[0]++; - } -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax FDIS session parms=%d,%d,%d,%d,%d,%d,%d,%d\n", - rp[0], rp[1], rp[2], rp[3], rp[4], rp[5], rp[6], rp[7]); -#endif - } - break; - default: - PARSE_ERROR1; - } - return 0; - } - /* DR - Receive Phase C data command, initiates document reception */ - if (!strncmp(p[0], "DR", 2)) { - p[0] += 2; - if ((info->faxonline & 16) && /* incoming connection */ - ((f->phase == ISDN_FAX_PHASE_B) || (f->phase == ISDN_FAX_PHASE_D))) { -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax FDR\n"); -#endif - f->code = ISDN_TTY_FAX_DR; - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - cmd.command = ISDN_CMD_FAXCMD; - isdn_command(&cmd); - if (f->phase == ISDN_FAX_PHASE_B) { - f->phase = ISDN_FAX_PHASE_C; - } else if (f->phase == ISDN_FAX_PHASE_D) { - switch (f->fet) { - case 0: /* next page will be received */ - f->phase = ISDN_FAX_PHASE_C; - isdn_tty_fax_modem_result(7, info); /* CONNECT */ - break; - case 1: /* next doc will be received */ - f->phase = ISDN_FAX_PHASE_B; - break; - case 2: /* fax session is terminating */ - f->phase = ISDN_FAX_PHASE_E; - break; - default: - PARSE_ERROR1; - } - } - } else { - PARSE_ERROR1; - } - return 1; - } - /* DT=df,vr,wd,ln - TX phase C data command (release DCE to proceed with negotiation) */ - if (!strncmp(p[0], "DT", 2)) { - int i, val[] = - {4, 0, 2, 3}; - char *rp = &f->resolution; - - p[0] += 2; - if (!(info->faxonline & 1)) /* not outgoing connection */ - PARSE_ERROR1; - - for (i = 0; (((*p[0] >= '0') && (*p[0] <= '9')) || (*p[0] == ',')) && (i < 4); i++) { - if (*p[0] != ',') { - if ((*p[0] - 48) > maxdccval[val[i]]) { - PARSE_ERROR1; - } - rp[val[i]] = *p[0] - 48; - p[0]++; - if (*p[0] == ',') - p[0]++; - } else - p[0]++; - } -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax FDT tx data command parms=%d,%d,%d,%d\n", - rp[4], rp[0], rp[2], rp[3]); -#endif - if ((f->phase == ISDN_FAX_PHASE_B) || (f->phase == ISDN_FAX_PHASE_D)) { - f->code = ISDN_TTY_FAX_DT; - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - cmd.command = ISDN_CMD_FAXCMD; - isdn_command(&cmd); - if (f->phase == ISDN_FAX_PHASE_D) { - f->phase = ISDN_FAX_PHASE_C; - isdn_tty_fax_modem_result(7, info); /* CONNECT */ - } - } else { - PARSE_ERROR1; - } - return 1; - } - /* ECM=n - Error mode control 0=disabled, 2=enabled, handled by DCE alone incl. buff of partial pages */ - if (!strncmp(p[0], "ECM", 3)) { - p[0] += 3; - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n%d", f->ecm); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if (*p[0] == '?') { - p[0]++; - sprintf(rs, "\r\n0,2"); - isdn_tty_at_cout(rs, info); - } else { - par = isdn_getnum(p); - if ((par != 0) && (par != 2)) - PARSE_ERROR1; - f->ecm = par; -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax FECM=%d\n", par); -#endif - } - break; - default: - PARSE_ERROR1; - } - return 0; - } - /* ET=n - End of page or document */ - if (!strncmp(p[0], "ET=", 3)) { - p[0] += 3; - if (*p[0] == '?') { - p[0]++; - sprintf(rs, "\r\n0-2"); - isdn_tty_at_cout(rs, info); - } else { - if ((f->phase != ISDN_FAX_PHASE_D) || - (!(info->faxonline & 1))) - PARSE_ERROR1; - par = isdn_getnum(p); - if ((par < 0) || (par > 2)) - PARSE_ERROR1; - f->fet = par; - f->code = ISDN_TTY_FAX_ET; - cmd.driver = info->isdn_driver; - cmd.arg = info->isdn_channel; - cmd.command = ISDN_CMD_FAXCMD; - isdn_command(&cmd); -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax FET=%d\n", par); -#endif - return 1; - } - return 0; - } - /* K - terminate */ - if (!strncmp(p[0], "K", 1)) { - p[0] += 1; - if ((f->phase == ISDN_FAX_PHASE_IDLE) || (f->phase == ISDN_FAX_PHASE_E)) - PARSE_ERROR1; - isdn_tty_modem_hup(info, 1); - return 1; - } - /* LID=string - local fax ID */ - if (!strncmp(p[0], "LID", 3)) { - int i, r; - p[0] += 3; - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n\"%s\"", f->id); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if (*p[0] == '?') { - p[0]++; - sprintf(rs, "\r\n\"STRING\""); - isdn_tty_at_cout(rs, info); - } else { - if (*p[0] == '"') - p[0]++; - for (i = 0; (*p[0]) && i < (FAXIDLEN - 1) && (*p[0] != '"'); i++) { - f->id[i] = *p[0]++; - } - if (*p[0] == '"') - p[0]++; - for (r = i; r < FAXIDLEN; r++) { - f->id[r] = 32; - } - f->id[FAXIDLEN - 1] = 0; -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax local ID \"%s\"\n", f->id); -#endif - } - break; - default: - PARSE_ERROR1; - } - return 0; - } - - /* MDL? - DCE Model */ - if (!strncmp(p[0], "MDL?", 4)) { - p[0] += 4; -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: FMDL?\n"); -#endif - isdn_tty_at_cout("\r\nisdn4linux", info); - return 0; - } - /* MFR? - DCE Manufacturer */ - if (!strncmp(p[0], "MFR?", 4)) { - p[0] += 4; -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: FMFR?\n"); -#endif - isdn_tty_at_cout("\r\nisdn4linux", info); - return 0; - } - /* MINSP=n - Minimum Speed for Phase C */ - if (!strncmp(p[0], "MINSP", 5)) { - p[0] += 5; - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n%d", f->minsp); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if (*p[0] == '?') { - p[0]++; - sprintf(rs, "\r\n0-5"); - isdn_tty_at_cout(rs, info); - } else { - par = isdn_getnum(p); - if ((par < 0) || (par > 5)) - PARSE_ERROR1; - f->minsp = par; -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax FMINSP=%d\n", par); -#endif - } - break; - default: - PARSE_ERROR1; - } - return 0; - } - /* PHCTO=value - DTE phase C timeout */ - if (!strncmp(p[0], "PHCTO", 5)) { - p[0] += 5; - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n%d", f->phcto); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if (*p[0] == '?') { - p[0]++; - sprintf(rs, "\r\n0-255"); - isdn_tty_at_cout(rs, info); - } else { - par = isdn_getnum(p); - if ((par < 0) || (par > 255)) - PARSE_ERROR1; - f->phcto = par; -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax FPHCTO=%d\n", par); -#endif - } - break; - default: - PARSE_ERROR1; - } - return 0; - } - - /* REL=n - Phase C received EOL alignment */ - if (!strncmp(p[0], "REL", 3)) { - p[0] += 3; - switch (*p[0]) { - case '?': - p[0]++; - sprintf(rs, "\r\n%d", f->rel); - isdn_tty_at_cout(rs, info); - break; - case '=': - p[0]++; - if (*p[0] == '?') { - p[0]++; - sprintf(rs, "\r\n0,1"); - isdn_tty_at_cout(rs, info); - } else { - par = isdn_getnum(p); - if ((par < 0) || (par > 1)) - PARSE_ERROR1; - f->rel = par; -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax FREL=%d\n", par); -#endif - } - break; - default: - PARSE_ERROR1; - } - return 0; - } - /* REV? - DCE Revision */ - if (!strncmp(p[0], "REV?", 4)) { - p[0] += 4; -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: FREV?\n"); -#endif - strcpy(rss, isdn_tty_fax_revision); - sprintf(rs, "\r\nRev: %s", isdn_getrev(rss)); - isdn_tty_at_cout(rs, info); - return 0; - } - - /* Phase C Transmit Data Block Size */ - if (!strncmp(p[0], "TBC=", 4)) { /* dummy, not used */ - p[0] += 4; -#ifdef ISDN_TTY_FAX_STAT_DEBUG - printk(KERN_DEBUG "isdn_tty: Fax FTBC=%c\n", *p[0]); -#endif - switch (*p[0]) { - case '0': - p[0]++; - break; - default: - PARSE_ERROR1; - } - return 0; - } - printk(KERN_DEBUG "isdn_tty: unknown token=>AT+F%s<\n", p[0]); - PARSE_ERROR1; -} - -int -isdn_tty_cmd_PLUSF_FAX(char **p, modem_info *info) -{ - if (TTY_IS_FCLASS2(info)) - return (isdn_tty_cmd_FCLASS2(p, info)); - else if (TTY_IS_FCLASS1(info)) - return (isdn_tty_cmd_FCLASS1(p, info)); - PARSE_ERROR1; -} diff --git a/drivers/isdn/i4l/isdn_ttyfax.h b/drivers/isdn/i4l/isdn_ttyfax.h deleted file mode 100644 index ccda4fcf8f7b..000000000000 --- a/drivers/isdn/i4l/isdn_ttyfax.h +++ /dev/null @@ -1,17 +0,0 @@ -/* $Id: isdn_ttyfax.h,v 1.1.2.2 2004/01/12 22:37:19 keil Exp $ - * - * header for Linux ISDN subsystem, tty_fax related functions (linklevel). - * - * Copyright 1999 by Armin Schindler (mac@melware.de) - * Copyright 1999 by Ralf Spachmann (mel@melware.de) - * Copyright 1999 by Cytronics & Melware - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - - -#define XON 0x11 -#define XOFF 0x13 -#define DC2 0x12 diff --git a/drivers/isdn/i4l/isdn_v110.c b/drivers/isdn/i4l/isdn_v110.c deleted file mode 100644 index d11fe76f138f..000000000000 --- a/drivers/isdn/i4l/isdn_v110.c +++ /dev/null @@ -1,625 +0,0 @@ -/* $Id: isdn_v110.c,v 1.1.2.2 2004/01/12 22:37:19 keil Exp $ - * - * Linux ISDN subsystem, V.110 related functions (linklevel). - * - * Copyright by Thomas Pfeiffer (pfeiffer@pds.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#include -#include -#include -#include -#include - -#include -#include "isdn_v110.h" - -#undef ISDN_V110_DEBUG - -char *isdn_v110_revision = "$Revision: 1.1.2.2 $"; - -#define V110_38400 255 -#define V110_19200 15 -#define V110_9600 3 - -/* - * The following data are precoded matrices, online and offline matrix - * for 9600, 19200 und 38400, respectively - */ -static unsigned char V110_OnMatrix_9600[] = -{0xfc, 0xfc, 0xfc, 0xfc, 0xff, 0xff, 0xff, 0xfd, 0xff, 0xff, - 0xff, 0xfd, 0xff, 0xff, 0xff, 0xfd, 0xff, 0xff, 0xff, 0xfd, - 0xfd, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfd, 0xff, 0xff, - 0xff, 0xfd, 0xff, 0xff, 0xff, 0xfd, 0xff, 0xff, 0xff, 0xfd}; - -static unsigned char V110_OffMatrix_9600[] = -{0xfc, 0xfc, 0xfc, 0xfc, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0xfd, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; - -static unsigned char V110_OnMatrix_19200[] = -{0xf0, 0xf0, 0xff, 0xf7, 0xff, 0xf7, 0xff, 0xf7, 0xff, 0xf7, - 0xfd, 0xff, 0xff, 0xf7, 0xff, 0xf7, 0xff, 0xf7, 0xff, 0xf7}; - -static unsigned char V110_OffMatrix_19200[] = -{0xf0, 0xf0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, - 0xfd, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; - -static unsigned char V110_OnMatrix_38400[] = -{0x00, 0x7f, 0x7f, 0x7f, 0x7f, 0xfd, 0x7f, 0x7f, 0x7f, 0x7f}; - -static unsigned char V110_OffMatrix_38400[] = -{0x00, 0xff, 0xff, 0xff, 0xff, 0xfd, 0xff, 0xff, 0xff, 0xff}; - -/* - * FlipBits reorders sequences of keylen bits in one byte. - * E.g. source order 7654321 will be converted to 45670123 when keylen = 4, - * and to 67452301 when keylen = 2. This is necessary because ordering on - * the isdn line is the other way. - */ -static inline unsigned char -FlipBits(unsigned char c, int keylen) -{ - unsigned char b = c; - unsigned char bit = 128; - int i; - int j; - int hunks = (8 / keylen); - - c = 0; - for (i = 0; i < hunks; i++) { - for (j = 0; j < keylen; j++) { - if (b & (bit >> j)) - c |= bit >> (keylen - j - 1); - } - bit >>= keylen; - } - return c; -} - - -/* isdn_v110_open allocates and initializes private V.110 data - * structures and returns a pointer to these. - */ -static isdn_v110_stream * -isdn_v110_open(unsigned char key, int hdrlen, int maxsize) -{ - int i; - isdn_v110_stream *v; - - if ((v = kzalloc(sizeof(isdn_v110_stream), GFP_ATOMIC)) == NULL) - return NULL; - v->key = key; - v->nbits = 0; - for (i = 0; key & (1 << i); i++) - v->nbits++; - - v->nbytes = 8 / v->nbits; - v->decodelen = 0; - - switch (key) { - case V110_38400: - v->OnlineFrame = V110_OnMatrix_38400; - v->OfflineFrame = V110_OffMatrix_38400; - break; - case V110_19200: - v->OnlineFrame = V110_OnMatrix_19200; - v->OfflineFrame = V110_OffMatrix_19200; - break; - default: - v->OnlineFrame = V110_OnMatrix_9600; - v->OfflineFrame = V110_OffMatrix_9600; - break; - } - v->framelen = v->nbytes * 10; - v->SyncInit = 5; - v->introducer = 0; - v->dbit = 1; - v->b = 0; - v->skbres = hdrlen; - v->maxsize = maxsize - hdrlen; - if ((v->encodebuf = kmalloc(maxsize, GFP_ATOMIC)) == NULL) { - kfree(v); - return NULL; - } - return v; -} - -/* isdn_v110_close frees private V.110 data structures */ -void -isdn_v110_close(isdn_v110_stream *v) -{ - if (v == NULL) - return; -#ifdef ISDN_V110_DEBUG - printk(KERN_DEBUG "v110 close\n"); -#endif - kfree(v->encodebuf); - kfree(v); -} - - -/* - * ValidHeaderBytes return the number of valid bytes in v->decodebuf - */ -static int -ValidHeaderBytes(isdn_v110_stream *v) -{ - int i; - for (i = 0; (i < v->decodelen) && (i < v->nbytes); i++) - if ((v->decodebuf[i] & v->key) != 0) - break; - return i; -} - -/* - * SyncHeader moves the decodebuf ptr to the next valid header - */ -static void -SyncHeader(isdn_v110_stream *v) -{ - unsigned char *rbuf = v->decodebuf; - int len = v->decodelen; - - if (len == 0) - return; - for (rbuf++, len--; len > 0; len--, rbuf++) /* such den SyncHeader in buf ! */ - if ((*rbuf & v->key) == 0) /* erstes byte gefunden ? */ - break; /* jupp! */ - if (len) - memcpy(v->decodebuf, rbuf, len); - - v->decodelen = len; -#ifdef ISDN_V110_DEBUG - printk(KERN_DEBUG "isdn_v110: Header resync\n"); -#endif -} - -/* DecodeMatrix takes n (n>=1) matrices (v110 frames, 10 bytes) where - len is the number of matrix-lines. len must be a multiple of 10, i.e. - only complete matices must be given. - From these, netto data is extracted and returned in buf. The return-value - is the bytecount of the decoded data. -*/ -static int -DecodeMatrix(isdn_v110_stream *v, unsigned char *m, int len, unsigned char *buf) -{ - int line = 0; - int buflen = 0; - int mbit = 64; - int introducer = v->introducer; - int dbit = v->dbit; - unsigned char b = v->b; - - while (line < len) { /* Are we done with all lines of the matrix? */ - if ((line % 10) == 0) { /* the 0. line of the matrix is always 0 ! */ - if (m[line] != 0x00) { /* not 0 ? -> error! */ -#ifdef ISDN_V110_DEBUG - printk(KERN_DEBUG "isdn_v110: DecodeMatrix, V110 Bad Header\n"); - /* returning now is not the right thing, though :-( */ -#endif - } - line++; /* next line of matrix */ - continue; - } else if ((line % 10) == 5) { /* in line 5 there's only e-bits ! */ - if ((m[line] & 0x70) != 0x30) { /* 011 has to be at the beginning! */ -#ifdef ISDN_V110_DEBUG - printk(KERN_DEBUG "isdn_v110: DecodeMatrix, V110 Bad 5th line\n"); - /* returning now is not the right thing, though :-( */ -#endif - } - line++; /* next line */ - continue; - } else if (!introducer) { /* every byte starts with 10 (stopbit, startbit) */ - introducer = (m[line] & mbit) ? 0 : 1; /* current bit of the matrix */ - next_byte: - if (mbit > 2) { /* was it the last bit in this line ? */ - mbit >>= 1; /* no -> take next */ - continue; - } /* otherwise start with leftmost bit in the next line */ - mbit = 64; - line++; - continue; - } else { /* otherwise we need to set a data bit */ - if (m[line] & mbit) /* was that bit set in the matrix ? */ - b |= dbit; /* yes -> set it in the data byte */ - else - b &= dbit - 1; /* no -> clear it in the data byte */ - if (dbit < 128) /* is that data byte done ? */ - dbit <<= 1; /* no, got the next bit */ - else { /* data byte is done */ - buf[buflen++] = b; /* copy byte into the output buffer */ - introducer = b = 0; /* init of the intro sequence and of the data byte */ - dbit = 1; /* next we look for the 0th bit */ - } - goto next_byte; /* look for next bit in the matrix */ - } - } - v->introducer = introducer; - v->dbit = dbit; - v->b = b; - return buflen; /* return number of bytes in the output buffer */ -} - -/* - * DecodeStream receives V.110 coded data from the input stream. It recovers the - * original frames. - * The input stream doesn't need to be framed - */ -struct sk_buff * -isdn_v110_decode(isdn_v110_stream *v, struct sk_buff *skb) -{ - int i; - int j; - int len; - unsigned char *v110_buf; - unsigned char *rbuf; - - if (!skb) { - printk(KERN_WARNING "isdn_v110_decode called with NULL skb!\n"); - return NULL; - } - rbuf = skb->data; - len = skb->len; - if (v == NULL) { - /* invalid handle, no chance to proceed */ - printk(KERN_WARNING "isdn_v110_decode called with NULL stream!\n"); - dev_kfree_skb(skb); - return NULL; - } - if (v->decodelen == 0) /* cache empty? */ - for (; len > 0; len--, rbuf++) /* scan for SyncHeader in buf */ - if ((*rbuf & v->key) == 0) - break; /* found first byte */ - if (len == 0) { - dev_kfree_skb(skb); - return NULL; - } - /* copy new data to decode-buffer */ - memcpy(&(v->decodebuf[v->decodelen]), rbuf, len); - v->decodelen += len; -ReSync: - if (v->decodelen < v->nbytes) { /* got a new header ? */ - dev_kfree_skb(skb); - return NULL; /* no, try later */ - } - if (ValidHeaderBytes(v) != v->nbytes) { /* is that a valid header? */ - SyncHeader(v); /* no -> look for header */ - goto ReSync; - } - len = (v->decodelen - (v->decodelen % (10 * v->nbytes))) / v->nbytes; - if ((v110_buf = kmalloc(len, GFP_ATOMIC)) == NULL) { - printk(KERN_WARNING "isdn_v110_decode: Couldn't allocate v110_buf\n"); - dev_kfree_skb(skb); - return NULL; - } - for (i = 0; i < len; i++) { - v110_buf[i] = 0; - for (j = 0; j < v->nbytes; j++) - v110_buf[i] |= (v->decodebuf[(i * v->nbytes) + j] & v->key) << (8 - ((j + 1) * v->nbits)); - v110_buf[i] = FlipBits(v110_buf[i], v->nbits); - } - v->decodelen = (v->decodelen % (10 * v->nbytes)); - memcpy(v->decodebuf, &(v->decodebuf[len * v->nbytes]), v->decodelen); - - skb_trim(skb, DecodeMatrix(v, v110_buf, len, skb->data)); - kfree(v110_buf); - if (skb->len) - return skb; - else { - kfree_skb(skb); - return NULL; - } -} - -/* EncodeMatrix takes input data in buf, len is the bytecount. - Data is encoded into v110 frames in m. Return value is the number of - matrix-lines generated. -*/ -static int -EncodeMatrix(unsigned char *buf, int len, unsigned char *m, int mlen) -{ - int line = 0; - int i = 0; - int mbit = 128; - int dbit = 1; - int introducer = 3; - int ibit[] = {0, 1, 1}; - - while ((i < len) && (line < mlen)) { /* while we still have input data */ - switch (line % 10) { /* in which line of the matrix are we? */ - case 0: - m[line++] = 0x00; /* line 0 is always 0 */ - mbit = 128; /* go on with the 7th bit */ - break; - case 5: - m[line++] = 0xbf; /* line 5 is always 10111111 */ - mbit = 128; /* go on with the 7th bit */ - break; - } - if (line >= mlen) { - printk(KERN_WARNING "isdn_v110 (EncodeMatrix): buffer full!\n"); - return line; - } - next_bit: - switch (mbit) { /* leftmost or rightmost bit ? */ - case 1: - line++; /* rightmost -> go to next line */ - if (line >= mlen) { - printk(KERN_WARNING "isdn_v110 (EncodeMatrix): buffer full!\n"); - return line; - } - /* fall through */ - case 128: - m[line] = 128; /* leftmost -> set byte to 1000000 */ - mbit = 64; /* current bit in the matrix line */ - continue; - } - if (introducer) { /* set 110 sequence ? */ - introducer--; /* set on digit less */ - m[line] |= ibit[introducer] ? mbit : 0; /* set corresponding bit */ - mbit >>= 1; /* bit of matrix line >> 1 */ - goto next_bit; /* and go on there */ - } /* else push data bits into the matrix! */ - m[line] |= (buf[i] & dbit) ? mbit : 0; /* set data bit in matrix */ - if (dbit == 128) { /* was it the last one? */ - dbit = 1; /* then go on with first bit of */ - i++; /* next byte in input buffer */ - if (i < len) /* input buffer done ? */ - introducer = 3; /* no, write introducer 110 */ - else { /* input buffer done ! */ - m[line] |= (mbit - 1) & 0xfe; /* set remaining bits in line to 1 */ - break; - } - } else /* not the last data bit */ - dbit <<= 1; /* then go to next data bit */ - mbit >>= 1; /* go to next bit of matrix */ - goto next_bit; - - } - /* if necessary, generate remaining lines of the matrix... */ - if ((line) && ((line + 10) < mlen)) - switch (++line % 10) { - case 1: - m[line++] = 0xfe; - /* fall through */ - case 2: - m[line++] = 0xfe; - /* fall through */ - case 3: - m[line++] = 0xfe; - /* fall through */ - case 4: - m[line++] = 0xfe; - /* fall through */ - case 5: - m[line++] = 0xbf; - /* fall through */ - case 6: - m[line++] = 0xfe; - /* fall through */ - case 7: - m[line++] = 0xfe; - /* fall through */ - case 8: - m[line++] = 0xfe; - /* fall through */ - case 9: - m[line++] = 0xfe; - } - return line; /* that's how many lines we have */ -} - -/* - * Build a sync frame. - */ -static struct sk_buff * -isdn_v110_sync(isdn_v110_stream *v) -{ - struct sk_buff *skb; - - if (v == NULL) { - /* invalid handle, no chance to proceed */ - printk(KERN_WARNING "isdn_v110_sync called with NULL stream!\n"); - return NULL; - } - if ((skb = dev_alloc_skb(v->framelen + v->skbres))) { - skb_reserve(skb, v->skbres); - skb_put_data(skb, v->OfflineFrame, v->framelen); - } - return skb; -} - -/* - * Build an idle frame. - */ -static struct sk_buff * -isdn_v110_idle(isdn_v110_stream *v) -{ - struct sk_buff *skb; - - if (v == NULL) { - /* invalid handle, no chance to proceed */ - printk(KERN_WARNING "isdn_v110_sync called with NULL stream!\n"); - return NULL; - } - if ((skb = dev_alloc_skb(v->framelen + v->skbres))) { - skb_reserve(skb, v->skbres); - skb_put_data(skb, v->OnlineFrame, v->framelen); - } - return skb; -} - -struct sk_buff * -isdn_v110_encode(isdn_v110_stream *v, struct sk_buff *skb) -{ - int i; - int j; - int rlen; - int mlen; - int olen; - int size; - int sval1; - int sval2; - int nframes; - unsigned char *v110buf; - unsigned char *rbuf; - struct sk_buff *nskb; - - if (v == NULL) { - /* invalid handle, no chance to proceed */ - printk(KERN_WARNING "isdn_v110_encode called with NULL stream!\n"); - return NULL; - } - if (!skb) { - /* invalid skb, no chance to proceed */ - printk(KERN_WARNING "isdn_v110_encode called with NULL skb!\n"); - return NULL; - } - rlen = skb->len; - nframes = (rlen + 3) / 4; - v110buf = v->encodebuf; - if ((nframes * 40) > v->maxsize) { - size = v->maxsize; - rlen = v->maxsize / 40; - } else - size = nframes * 40; - if (!(nskb = dev_alloc_skb(size + v->skbres + sizeof(int)))) { - printk(KERN_WARNING "isdn_v110_encode: Couldn't alloc skb\n"); - return NULL; - } - skb_reserve(nskb, v->skbres + sizeof(int)); - if (skb->len == 0) { - skb_put_data(nskb, v->OnlineFrame, v->framelen); - *((int *)skb_push(nskb, sizeof(int))) = 0; - return nskb; - } - mlen = EncodeMatrix(skb->data, rlen, v110buf, size); - /* now distribute 2 or 4 bits each to the output stream! */ - rbuf = skb_put(nskb, size); - olen = 0; - sval1 = 8 - v->nbits; - sval2 = v->key << sval1; - for (i = 0; i < mlen; i++) { - v110buf[i] = FlipBits(v110buf[i], v->nbits); - for (j = 0; j < v->nbytes; j++) { - if (size--) - *rbuf++ = ~v->key | (((v110buf[i] << (j * v->nbits)) & sval2) >> sval1); - else { - printk(KERN_WARNING "isdn_v110_encode: buffers full!\n"); - goto buffer_full; - } - olen++; - } - } -buffer_full: - skb_trim(nskb, olen); - *((int *)skb_push(nskb, sizeof(int))) = rlen; - return nskb; -} - -int -isdn_v110_stat_callback(int idx, isdn_ctrl *c) -{ - isdn_v110_stream *v = NULL; - int i; - int ret = 0; - - if (idx < 0) - return 0; - switch (c->command) { - case ISDN_STAT_BSENT: - /* Keep the send-queue of the driver filled - * with frames: - * If number of outstanding frames < 3, - * send down an Idle-Frame (or an Sync-Frame, if - * v->SyncInit != 0). - */ - if (!(v = dev->v110[idx])) - return 0; - atomic_inc(&dev->v110use[idx]); - for (i = 0; i * v->framelen < c->parm.length; i++) { - if (v->skbidle > 0) { - v->skbidle--; - ret = 1; - } else { - if (v->skbuser > 0) - v->skbuser--; - ret = 0; - } - } - for (i = v->skbuser + v->skbidle; i < 2; i++) { - struct sk_buff *skb; - if (v->SyncInit > 0) - skb = isdn_v110_sync(v); - else - skb = isdn_v110_idle(v); - if (skb) { - if (dev->drv[c->driver]->interface->writebuf_skb(c->driver, c->arg, 1, skb) <= 0) { - dev_kfree_skb(skb); - break; - } else { - if (v->SyncInit) - v->SyncInit--; - v->skbidle++; - } - } else - break; - } - atomic_dec(&dev->v110use[idx]); - return ret; - case ISDN_STAT_DHUP: - case ISDN_STAT_BHUP: - while (1) { - atomic_inc(&dev->v110use[idx]); - if (atomic_dec_and_test(&dev->v110use[idx])) { - isdn_v110_close(dev->v110[idx]); - dev->v110[idx] = NULL; - break; - } - mdelay(1); - } - break; - case ISDN_STAT_BCONN: - if (dev->v110emu[idx] && (dev->v110[idx] == NULL)) { - int hdrlen = dev->drv[c->driver]->interface->hl_hdrlen; - int maxsize = dev->drv[c->driver]->interface->maxbufsize; - atomic_inc(&dev->v110use[idx]); - switch (dev->v110emu[idx]) { - case ISDN_PROTO_L2_V11096: - dev->v110[idx] = isdn_v110_open(V110_9600, hdrlen, maxsize); - break; - case ISDN_PROTO_L2_V11019: - dev->v110[idx] = isdn_v110_open(V110_19200, hdrlen, maxsize); - break; - case ISDN_PROTO_L2_V11038: - dev->v110[idx] = isdn_v110_open(V110_38400, hdrlen, maxsize); - break; - default:; - } - if ((v = dev->v110[idx])) { - while (v->SyncInit) { - struct sk_buff *skb = isdn_v110_sync(v); - if (dev->drv[c->driver]->interface->writebuf_skb(c->driver, c->arg, 1, skb) <= 0) { - dev_kfree_skb(skb); - /* Unable to send, try later */ - break; - } - v->SyncInit--; - v->skbidle++; - } - } else - printk(KERN_WARNING "isdn_v110: Couldn't open stream for chan %d\n", idx); - atomic_dec(&dev->v110use[idx]); - } - break; - default: - return 0; - } - return 0; -} diff --git a/drivers/isdn/i4l/isdn_v110.h b/drivers/isdn/i4l/isdn_v110.h deleted file mode 100644 index de774ab598c9..000000000000 --- a/drivers/isdn/i4l/isdn_v110.h +++ /dev/null @@ -1,29 +0,0 @@ -/* $Id: isdn_v110.h,v 1.1.2.2 2004/01/12 22:37:19 keil Exp $ - * - * Linux ISDN subsystem, V.110 related functions (linklevel). - * - * Copyright by Thomas Pfeiffer (pfeiffer@pds.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#ifndef _isdn_v110_h_ -#define _isdn_v110_h_ - -/* - * isdn_v110_encode will take raw data and encode it using V.110 - */ -extern struct sk_buff *isdn_v110_encode(isdn_v110_stream *, struct sk_buff *); - -/* - * isdn_v110_decode receives V.110 coded data from the stream and rebuilds - * frames from them. The source stream doesn't need to be framed. - */ -extern struct sk_buff *isdn_v110_decode(isdn_v110_stream *, struct sk_buff *); - -extern int isdn_v110_stat_callback(int, isdn_ctrl *); -extern void isdn_v110_close(isdn_v110_stream *v); - -#endif diff --git a/drivers/isdn/i4l/isdn_x25iface.c b/drivers/isdn/i4l/isdn_x25iface.c deleted file mode 100644 index 48bfbcb4a09d..000000000000 --- a/drivers/isdn/i4l/isdn_x25iface.c +++ /dev/null @@ -1,332 +0,0 @@ -/* $Id: isdn_x25iface.c,v 1.1.2.2 2004/01/12 22:37:19 keil Exp $ - * - * Linux ISDN subsystem, X.25 related functions - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * stuff needed to support the Linux X.25 PLP code on top of devices that - * can provide a lab_b service using the concap_proto mechanism. - * This module supports a network interface which provides lapb_sematics - * -- as defined in Documentation/networking/x25-iface.txt -- to - * the upper layer and assumes that the lower layer provides a reliable - * data link service by means of the concap_device_ops callbacks. - * - * Only protocol specific stuff goes here. Device specific stuff - * goes to another -- device related -- concap_proto support source file. - * - */ - -/* #include */ -#include -#include -#include -#include -#include -#include "isdn_x25iface.h" - -/* for debugging messages not to cause an oops when device pointer is NULL*/ -#define MY_DEVNAME(dev) ((dev) ? (dev)->name : "DEVICE UNSPECIFIED") - - -typedef struct isdn_x25iface_proto_data { - int magic; - enum wan_states state; - /* Private stuff, not to be accessed via proto_data. We provide the - other storage for the concap_proto instance here as well, - enabling us to allocate both with just one kmalloc(): */ - struct concap_proto priv; -} ix25_pdata_t; - - - -/* is now in header file (extern): struct concap_proto * isdn_x25iface_proto_new(void); */ -static void isdn_x25iface_proto_del(struct concap_proto *); -static int isdn_x25iface_proto_close(struct concap_proto *); -static int isdn_x25iface_proto_restart(struct concap_proto *, - struct net_device *, - struct concap_device_ops *); -static int isdn_x25iface_xmit(struct concap_proto *, struct sk_buff *); -static int isdn_x25iface_receive(struct concap_proto *, struct sk_buff *); -static int isdn_x25iface_connect_ind(struct concap_proto *); -static int isdn_x25iface_disconn_ind(struct concap_proto *); - - -static struct concap_proto_ops ix25_pops = { - .proto_new = &isdn_x25iface_proto_new, - .proto_del = &isdn_x25iface_proto_del, - .restart = &isdn_x25iface_proto_restart, - .close = &isdn_x25iface_proto_close, - .encap_and_xmit = &isdn_x25iface_xmit, - .data_ind = &isdn_x25iface_receive, - .connect_ind = &isdn_x25iface_connect_ind, - .disconn_ind = &isdn_x25iface_disconn_ind -}; - -/* error message helper function */ -static void illegal_state_warn(unsigned state, unsigned char firstbyte) -{ - printk(KERN_WARNING "isdn_x25iface: firstbyte %x illegal in" - "current state %d\n", firstbyte, state); -} - -/* check protocol data field for consistency */ -static int pdata_is_bad(ix25_pdata_t *pda) { - - if (pda && pda->magic == ISDN_X25IFACE_MAGIC) return 0; - printk(KERN_WARNING - "isdn_x25iface_xxx: illegal pointer to proto data\n"); - return 1; -} - -/* create a new x25 interface protocol instance - */ -struct concap_proto *isdn_x25iface_proto_new(void) -{ - ix25_pdata_t *tmp = kmalloc(sizeof(ix25_pdata_t), GFP_KERNEL); - IX25DEBUG("isdn_x25iface_proto_new\n"); - if (tmp) { - tmp->magic = ISDN_X25IFACE_MAGIC; - tmp->state = WAN_UNCONFIGURED; - /* private data space used to hold the concap_proto data. - Only to be accessed via the returned pointer */ - spin_lock_init(&tmp->priv.lock); - tmp->priv.dops = NULL; - tmp->priv.net_dev = NULL; - tmp->priv.pops = &ix25_pops; - tmp->priv.flags = 0; - tmp->priv.proto_data = tmp; - return (&(tmp->priv)); - } - return NULL; -}; - -/* close the x25iface encapsulation protocol - */ -static int isdn_x25iface_proto_close(struct concap_proto *cprot) { - - ix25_pdata_t *tmp; - int ret = 0; - ulong flags; - - if (!cprot) { - printk(KERN_ERR "isdn_x25iface_proto_close: " - "invalid concap_proto pointer\n"); - return -1; - } - IX25DEBUG("isdn_x25iface_proto_close %s \n", MY_DEVNAME(cprot->net_dev)); - spin_lock_irqsave(&cprot->lock, flags); - cprot->dops = NULL; - cprot->net_dev = NULL; - tmp = cprot->proto_data; - if (pdata_is_bad(tmp)) { - ret = -1; - } else { - tmp->state = WAN_UNCONFIGURED; - } - spin_unlock_irqrestore(&cprot->lock, flags); - return ret; -} - -/* Delete the x25iface encapsulation protocol instance - */ -static void isdn_x25iface_proto_del(struct concap_proto *cprot) { - - ix25_pdata_t *tmp; - - IX25DEBUG("isdn_x25iface_proto_del \n"); - if (!cprot) { - printk(KERN_ERR "isdn_x25iface_proto_del: " - "concap_proto pointer is NULL\n"); - return; - } - tmp = cprot->proto_data; - if (tmp == NULL) { - printk(KERN_ERR "isdn_x25iface_proto_del: inconsistent " - "proto_data pointer (maybe already deleted?)\n"); - return; - } - /* close if the protocol is still open */ - if (cprot->dops) isdn_x25iface_proto_close(cprot); - /* freeing the storage should be sufficient now. But some additional - settings might help to catch wild pointer bugs */ - tmp->magic = 0; - cprot->proto_data = NULL; - - kfree(tmp); - return; -} - -/* (re-)initialize the data structures for x25iface encapsulation - */ -static int isdn_x25iface_proto_restart(struct concap_proto *cprot, - struct net_device *ndev, - struct concap_device_ops *dops) -{ - ix25_pdata_t *pda = cprot->proto_data; - ulong flags; - - IX25DEBUG("isdn_x25iface_proto_restart %s \n", MY_DEVNAME(ndev)); - - if (pdata_is_bad(pda)) return -1; - - if (!(dops && dops->data_req && dops->connect_req - && dops->disconn_req)) { - printk(KERN_WARNING "isdn_x25iface_restart: required dops" - " missing\n"); - isdn_x25iface_proto_close(cprot); - return -1; - } - spin_lock_irqsave(&cprot->lock, flags); - cprot->net_dev = ndev; - cprot->pops = &ix25_pops; - cprot->dops = dops; - pda->state = WAN_DISCONNECTED; - spin_unlock_irqrestore(&cprot->lock, flags); - return 0; -} - -/* deliver a dl_data frame received from i4l HL driver to the network layer - */ -static int isdn_x25iface_receive(struct concap_proto *cprot, struct sk_buff *skb) -{ - IX25DEBUG("isdn_x25iface_receive %s \n", MY_DEVNAME(cprot->net_dev)); - if (((ix25_pdata_t *)(cprot->proto_data)) - ->state == WAN_CONNECTED) { - if (skb_push(skb, 1)) { - skb->data[0] = X25_IFACE_DATA; - skb->protocol = x25_type_trans(skb, cprot->net_dev); - netif_rx(skb); - return 0; - } - } - printk(KERN_WARNING "isdn_x25iface_receive %s: not connected, skb dropped\n", MY_DEVNAME(cprot->net_dev)); - dev_kfree_skb(skb); - return -1; -} - -/* a connection set up is indicated by lower layer - */ -static int isdn_x25iface_connect_ind(struct concap_proto *cprot) -{ - struct sk_buff *skb; - enum wan_states *state_p - = &(((ix25_pdata_t *)(cprot->proto_data))->state); - IX25DEBUG("isdn_x25iface_connect_ind %s \n" - , MY_DEVNAME(cprot->net_dev)); - if (*state_p == WAN_UNCONFIGURED) { - printk(KERN_WARNING - "isdn_x25iface_connect_ind while unconfigured %s\n" - , MY_DEVNAME(cprot->net_dev)); - return -1; - } - *state_p = WAN_CONNECTED; - - skb = dev_alloc_skb(1); - if (skb) { - skb_put_u8(skb, X25_IFACE_CONNECT); - skb->protocol = x25_type_trans(skb, cprot->net_dev); - netif_rx(skb); - return 0; - } else { - printk(KERN_WARNING "isdn_x25iface_connect_ind: " - " out of memory -- disconnecting\n"); - cprot->dops->disconn_req(cprot); - return -1; - } -} - -/* a disconnect is indicated by lower layer - */ -static int isdn_x25iface_disconn_ind(struct concap_proto *cprot) -{ - struct sk_buff *skb; - enum wan_states *state_p - = &(((ix25_pdata_t *)(cprot->proto_data))->state); - IX25DEBUG("isdn_x25iface_disconn_ind %s \n", MY_DEVNAME(cprot->net_dev)); - if (*state_p == WAN_UNCONFIGURED) { - printk(KERN_WARNING - "isdn_x25iface_disconn_ind while unconfigured\n"); - return -1; - } - if (!cprot->net_dev) return -1; - *state_p = WAN_DISCONNECTED; - skb = dev_alloc_skb(1); - if (skb) { - skb_put_u8(skb, X25_IFACE_DISCONNECT); - skb->protocol = x25_type_trans(skb, cprot->net_dev); - netif_rx(skb); - return 0; - } else { - printk(KERN_WARNING "isdn_x25iface_disconn_ind:" - " out of memory\n"); - return -1; - } -} - -/* process a frame handed over to us from linux network layer. First byte - semantics as defined in Documentation/networking/x25-iface.txt -*/ -static int isdn_x25iface_xmit(struct concap_proto *cprot, struct sk_buff *skb) -{ - unsigned char firstbyte = skb->data[0]; - enum wan_states *state = &((ix25_pdata_t *)cprot->proto_data)->state; - int ret = 0; - IX25DEBUG("isdn_x25iface_xmit: %s first=%x state=%d\n", - MY_DEVNAME(cprot->net_dev), firstbyte, *state); - switch (firstbyte) { - case X25_IFACE_DATA: - if (*state == WAN_CONNECTED) { - skb_pull(skb, 1); - netif_trans_update(cprot->net_dev); - ret = (cprot->dops->data_req(cprot, skb)); - /* prepare for future retransmissions */ - if (ret) skb_push(skb, 1); - return ret; - } - illegal_state_warn(*state, firstbyte); - break; - case X25_IFACE_CONNECT: - if (*state == WAN_DISCONNECTED) { - *state = WAN_CONNECTING; - ret = cprot->dops->connect_req(cprot); - if (ret) { - /* reset state and notify upper layer about - * immidiatly failed attempts */ - isdn_x25iface_disconn_ind(cprot); - } - } else { - illegal_state_warn(*state, firstbyte); - } - break; - case X25_IFACE_DISCONNECT: - switch (*state) { - case WAN_DISCONNECTED: - /* Should not happen. However, give upper layer a - chance to recover from inconstistency but don't - trust the lower layer sending the disconn_confirm - when already disconnected */ - printk(KERN_WARNING "isdn_x25iface_xmit: disconnect " - " requested while disconnected\n"); - isdn_x25iface_disconn_ind(cprot); - break; /* prevent infinite loops */ - case WAN_CONNECTING: - case WAN_CONNECTED: - *state = WAN_DISCONNECTED; - cprot->dops->disconn_req(cprot); - break; - default: - illegal_state_warn(*state, firstbyte); - } - break; - case X25_IFACE_PARAMS: - printk(KERN_WARNING "isdn_x25iface_xmit: setting of lapb" - " options not yet supported\n"); - break; - default: - printk(KERN_WARNING "isdn_x25iface_xmit: frame with illegal" - " first byte %x ignored:\n", firstbyte); - } - dev_kfree_skb(skb); - return 0; -} diff --git a/drivers/isdn/i4l/isdn_x25iface.h b/drivers/isdn/i4l/isdn_x25iface.h deleted file mode 100644 index ca08e082cf7c..000000000000 --- a/drivers/isdn/i4l/isdn_x25iface.h +++ /dev/null @@ -1,30 +0,0 @@ -/* $Id: isdn_x25iface.h,v 1.1.2.2 2004/01/12 22:37:19 keil Exp $ - * - * header for Linux ISDN subsystem, x.25 related functions - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#ifndef _LINUX_ISDN_X25IFACE_H -#define _LINUX_ISDN_X25IFACE_H - -#define ISDN_X25IFACE_MAGIC 0x1e75a2b9 -/* #define DEBUG_ISDN_X25 if you want isdn_x25 debugging messages */ -#ifdef DEBUG_ISDN_X25 -# define IX25DEBUG(fmt, args...) printk(KERN_DEBUG fmt, ##args) -#else -# define IX25DEBUG(fmt, args...) -#endif - -#include -#include -#include - -extern struct concap_proto_ops *isdn_x25iface_concap_proto_ops_pt; -extern struct concap_proto *isdn_x25iface_proto_new(void); - - - -#endif diff --git a/drivers/isdn/isdnloop/Makefile b/drivers/isdn/isdnloop/Makefile deleted file mode 100644 index 5ff4c0e09768..000000000000 --- a/drivers/isdn/isdnloop/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# Makefile for the isdnloop ISDN device driver - -# Each configuration option enables a list of files. - -obj-$(CONFIG_ISDN_DRV_LOOP) += isdnloop.o diff --git a/drivers/isdn/isdnloop/isdnloop.c b/drivers/isdn/isdnloop/isdnloop.c deleted file mode 100644 index 755c6bbc9553..000000000000 --- a/drivers/isdn/isdnloop/isdnloop.c +++ /dev/null @@ -1,1528 +0,0 @@ -/* $Id: isdnloop.c,v 1.11.6.7 2001/11/11 19:54:31 kai Exp $ - * - * ISDN low-level module implementing a dummy loop driver. - * - * Copyright 1997 by Fritz Elfert (fritz@isdn4linux.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#include -#include -#include -#include -#include -#include "isdnloop.h" - -static char *isdnloop_id = "loop0"; - -MODULE_DESCRIPTION("ISDN4Linux: Pseudo Driver that simulates an ISDN card"); -MODULE_AUTHOR("Fritz Elfert"); -MODULE_LICENSE("GPL"); -module_param(isdnloop_id, charp, 0); -MODULE_PARM_DESC(isdnloop_id, "ID-String of first card"); - -static int isdnloop_addcard(char *); - -/* - * Free queue completely. - * - * Parameter: - * card = pointer to card struct - * channel = channel number - */ -static void -isdnloop_free_queue(isdnloop_card *card, int channel) -{ - struct sk_buff_head *queue = &card->bqueue[channel]; - - skb_queue_purge(queue); - card->sndcount[channel] = 0; -} - -/* - * Send B-Channel data to another virtual card. - * This routine is called via timer-callback from isdnloop_pollbchan(). - * - * Parameter: - * card = pointer to card struct. - * ch = channel number (0-based) - */ -static void -isdnloop_bchan_send(isdnloop_card *card, int ch) -{ - isdnloop_card *rcard = card->rcard[ch]; - int rch = card->rch[ch], len, ack; - struct sk_buff *skb; - isdn_ctrl cmd; - - while (card->sndcount[ch]) { - skb = skb_dequeue(&card->bqueue[ch]); - if (skb) { - len = skb->len; - card->sndcount[ch] -= len; - ack = *(skb->head); /* used as scratch area */ - cmd.driver = card->myid; - cmd.arg = ch; - if (rcard) { - rcard->interface.rcvcallb_skb(rcard->myid, rch, skb); - } else { - printk(KERN_WARNING "isdnloop: no rcard, skb dropped\n"); - dev_kfree_skb(skb); - - } - cmd.command = ISDN_STAT_BSENT; - cmd.parm.length = len; - card->interface.statcallb(&cmd); - } else - card->sndcount[ch] = 0; - } -} - -/* - * Send/Receive Data to/from the B-Channel. - * This routine is called via timer-callback. - * It schedules itself while any B-Channel is open. - * - * Parameter: - * data = pointer to card struct, set by kernel timer.data - */ -static void -isdnloop_pollbchan(struct timer_list *t) -{ - isdnloop_card *card = from_timer(card, t, rb_timer); - unsigned long flags; - - if (card->flags & ISDNLOOP_FLAGS_B1ACTIVE) - isdnloop_bchan_send(card, 0); - if (card->flags & ISDNLOOP_FLAGS_B2ACTIVE) - isdnloop_bchan_send(card, 1); - if (card->flags & (ISDNLOOP_FLAGS_B1ACTIVE | ISDNLOOP_FLAGS_B2ACTIVE)) { - /* schedule b-channel polling again */ - spin_lock_irqsave(&card->isdnloop_lock, flags); - card->rb_timer.expires = jiffies + ISDNLOOP_TIMER_BCREAD; - add_timer(&card->rb_timer); - card->flags |= ISDNLOOP_FLAGS_RBTIMER; - spin_unlock_irqrestore(&card->isdnloop_lock, flags); - } else - card->flags &= ~ISDNLOOP_FLAGS_RBTIMER; -} - -/* - * Parse ICN-type setup string and fill fields of setup-struct - * with parsed data. - * - * Parameter: - * setup = setup string, format: [caller-id],si1,si2,[called-id] - * cmd = pointer to struct to be filled. - */ -static void -isdnloop_parse_setup(char *setup, isdn_ctrl *cmd) -{ - char *t = setup; - char *s = strchr(t, ','); - - *s++ = '\0'; - strlcpy(cmd->parm.setup.phone, t, sizeof(cmd->parm.setup.phone)); - s = strchr(t = s, ','); - *s++ = '\0'; - if (!strlen(t)) - cmd->parm.setup.si1 = 0; - else - cmd->parm.setup.si1 = simple_strtoul(t, NULL, 10); - s = strchr(t = s, ','); - *s++ = '\0'; - if (!strlen(t)) - cmd->parm.setup.si2 = 0; - else - cmd->parm.setup.si2 = - simple_strtoul(t, NULL, 10); - strlcpy(cmd->parm.setup.eazmsn, s, sizeof(cmd->parm.setup.eazmsn)); - cmd->parm.setup.plan = 0; - cmd->parm.setup.screen = 0; -} - -typedef struct isdnloop_stat { - char *statstr; - int command; - int action; -} isdnloop_stat; -/* *INDENT-OFF* */ -static isdnloop_stat isdnloop_stat_table[] = { - {"BCON_", ISDN_STAT_BCONN, 1}, /* B-Channel connected */ - {"BDIS_", ISDN_STAT_BHUP, 2}, /* B-Channel disconnected */ - {"DCON_", ISDN_STAT_DCONN, 0}, /* D-Channel connected */ - {"DDIS_", ISDN_STAT_DHUP, 0}, /* D-Channel disconnected */ - {"DCAL_I", ISDN_STAT_ICALL, 3}, /* Incoming call dialup-line */ - {"DSCA_I", ISDN_STAT_ICALL, 3}, /* Incoming call 1TR6-SPV */ - {"FCALL", ISDN_STAT_ICALL, 4}, /* Leased line connection up */ - {"CIF", ISDN_STAT_CINF, 5}, /* Charge-info, 1TR6-type */ - {"AOC", ISDN_STAT_CINF, 6}, /* Charge-info, DSS1-type */ - {"CAU", ISDN_STAT_CAUSE, 7}, /* Cause code */ - {"TEI OK", ISDN_STAT_RUN, 0}, /* Card connected to wallplug */ - {"E_L1: ACT FAIL", ISDN_STAT_BHUP, 8}, /* Layer-1 activation failed */ - {"E_L2: DATA LIN", ISDN_STAT_BHUP, 8}, /* Layer-2 data link lost */ - {"E_L1: ACTIVATION FAILED", - ISDN_STAT_BHUP, 8}, /* Layer-1 activation failed */ - {NULL, 0, -1} -}; -/* *INDENT-ON* */ - - -/* - * Parse Status message-strings from virtual card. - * Depending on status, call statcallb for sending messages to upper - * levels. Also set/reset B-Channel active-flags. - * - * Parameter: - * status = status string to parse. - * channel = channel where message comes from. - * card = card where message comes from. - */ -static void -isdnloop_parse_status(u_char *status, int channel, isdnloop_card *card) -{ - isdnloop_stat *s = isdnloop_stat_table; - int action = -1; - isdn_ctrl cmd; - - while (s->statstr) { - if (!strncmp(status, s->statstr, strlen(s->statstr))) { - cmd.command = s->command; - action = s->action; - break; - } - s++; - } - if (action == -1) - return; - cmd.driver = card->myid; - cmd.arg = channel; - switch (action) { - case 1: - /* BCON_x */ - card->flags |= (channel) ? - ISDNLOOP_FLAGS_B2ACTIVE : ISDNLOOP_FLAGS_B1ACTIVE; - break; - case 2: - /* BDIS_x */ - card->flags &= ~((channel) ? - ISDNLOOP_FLAGS_B2ACTIVE : ISDNLOOP_FLAGS_B1ACTIVE); - isdnloop_free_queue(card, channel); - break; - case 3: - /* DCAL_I and DSCA_I */ - isdnloop_parse_setup(status + 6, &cmd); - break; - case 4: - /* FCALL */ - sprintf(cmd.parm.setup.phone, "LEASED%d", card->myid); - sprintf(cmd.parm.setup.eazmsn, "%d", channel + 1); - cmd.parm.setup.si1 = 7; - cmd.parm.setup.si2 = 0; - cmd.parm.setup.plan = 0; - cmd.parm.setup.screen = 0; - break; - case 5: - /* CIF */ - strlcpy(cmd.parm.num, status + 3, sizeof(cmd.parm.num)); - break; - case 6: - /* AOC */ - snprintf(cmd.parm.num, sizeof(cmd.parm.num), "%d", - (int) simple_strtoul(status + 7, NULL, 16)); - break; - case 7: - /* CAU */ - status += 3; - if (strlen(status) == 4) - snprintf(cmd.parm.num, sizeof(cmd.parm.num), "%s%c%c", - status + 2, *status, *(status + 1)); - else - strlcpy(cmd.parm.num, status + 1, sizeof(cmd.parm.num)); - break; - case 8: - /* Misc Errors on L1 and L2 */ - card->flags &= ~ISDNLOOP_FLAGS_B1ACTIVE; - isdnloop_free_queue(card, 0); - cmd.arg = 0; - cmd.driver = card->myid; - card->interface.statcallb(&cmd); - cmd.command = ISDN_STAT_DHUP; - cmd.arg = 0; - cmd.driver = card->myid; - card->interface.statcallb(&cmd); - cmd.command = ISDN_STAT_BHUP; - card->flags &= ~ISDNLOOP_FLAGS_B2ACTIVE; - isdnloop_free_queue(card, 1); - cmd.arg = 1; - cmd.driver = card->myid; - card->interface.statcallb(&cmd); - cmd.command = ISDN_STAT_DHUP; - cmd.arg = 1; - cmd.driver = card->myid; - break; - } - card->interface.statcallb(&cmd); -} - -/* - * Store a cwcharacter into ringbuffer for reading from /dev/isdnctrl - * - * Parameter: - * card = pointer to card struct. - * c = char to store. - */ -static void -isdnloop_putmsg(isdnloop_card *card, unsigned char c) -{ - ulong flags; - - spin_lock_irqsave(&card->isdnloop_lock, flags); - *card->msg_buf_write++ = (c == 0xff) ? '\n' : c; - if (card->msg_buf_write == card->msg_buf_read) { - if (++card->msg_buf_read > card->msg_buf_end) - card->msg_buf_read = card->msg_buf; - } - if (card->msg_buf_write > card->msg_buf_end) - card->msg_buf_write = card->msg_buf; - spin_unlock_irqrestore(&card->isdnloop_lock, flags); -} - -/* - * Poll a virtual cards message queue. - * If there are new status-replies from the card, copy them to - * ringbuffer for reading on /dev/isdnctrl and call - * isdnloop_parse_status() for processing them. Watch for special - * Firmware bootmessage and parse it, to get the D-Channel protocol. - * If there are B-Channels open, initiate a timer-callback to - * isdnloop_pollbchan(). - * This routine is called periodically via timer interrupt. - * - * Parameter: - * data = pointer to card struct - */ -static void -isdnloop_polldchan(struct timer_list *t) -{ - isdnloop_card *card = from_timer(card, t, st_timer); - struct sk_buff *skb; - int avail; - int left; - u_char c; - int ch; - unsigned long flags; - u_char *p; - isdn_ctrl cmd; - - skb = skb_dequeue(&card->dqueue); - if (skb) - avail = skb->len; - else - avail = 0; - for (left = avail; left > 0; left--) { - c = *skb->data; - skb_pull(skb, 1); - isdnloop_putmsg(card, c); - card->imsg[card->iptr] = c; - if (card->iptr < 59) - card->iptr++; - if (!skb->len) { - avail++; - isdnloop_putmsg(card, '\n'); - card->imsg[card->iptr] = 0; - card->iptr = 0; - if (card->imsg[0] == '0' && card->imsg[1] >= '0' && - card->imsg[1] <= '2' && card->imsg[2] == ';') { - ch = (card->imsg[1] - '0') - 1; - p = &card->imsg[3]; - isdnloop_parse_status(p, ch, card); - } else { - p = card->imsg; - if (!strncmp(p, "DRV1.", 5)) { - printk(KERN_INFO "isdnloop: (%s) %s\n", CID, p); - if (!strncmp(p + 7, "TC", 2)) { - card->ptype = ISDN_PTYPE_1TR6; - card->interface.features |= ISDN_FEATURE_P_1TR6; - printk(KERN_INFO - "isdnloop: (%s) 1TR6-Protocol loaded and running\n", CID); - } - if (!strncmp(p + 7, "EC", 2)) { - card->ptype = ISDN_PTYPE_EURO; - card->interface.features |= ISDN_FEATURE_P_EURO; - printk(KERN_INFO - "isdnloop: (%s) Euro-Protocol loaded and running\n", CID); - } - continue; - - } - } - } - } - if (avail) { - cmd.command = ISDN_STAT_STAVAIL; - cmd.driver = card->myid; - cmd.arg = avail; - card->interface.statcallb(&cmd); - } - if (card->flags & (ISDNLOOP_FLAGS_B1ACTIVE | ISDNLOOP_FLAGS_B2ACTIVE)) - if (!(card->flags & ISDNLOOP_FLAGS_RBTIMER)) { - /* schedule b-channel polling */ - card->flags |= ISDNLOOP_FLAGS_RBTIMER; - spin_lock_irqsave(&card->isdnloop_lock, flags); - del_timer(&card->rb_timer); - card->rb_timer.expires = jiffies + ISDNLOOP_TIMER_BCREAD; - add_timer(&card->rb_timer); - spin_unlock_irqrestore(&card->isdnloop_lock, flags); - } - /* schedule again */ - spin_lock_irqsave(&card->isdnloop_lock, flags); - card->st_timer.expires = jiffies + ISDNLOOP_TIMER_DCREAD; - add_timer(&card->st_timer); - spin_unlock_irqrestore(&card->isdnloop_lock, flags); -} - -/* - * Append a packet to the transmit buffer-queue. - * - * Parameter: - * channel = Number of B-channel - * skb = packet to send. - * card = pointer to card-struct - * Return: - * Number of bytes transferred, -E??? on error - */ -static int -isdnloop_sendbuf(int channel, struct sk_buff *skb, isdnloop_card *card) -{ - int len = skb->len; - unsigned long flags; - struct sk_buff *nskb; - - if (len > 4000) { - printk(KERN_WARNING - "isdnloop: Send packet too large\n"); - return -EINVAL; - } - if (len) { - if (!(card->flags & (channel ? ISDNLOOP_FLAGS_B2ACTIVE : ISDNLOOP_FLAGS_B1ACTIVE))) - return 0; - if (card->sndcount[channel] > ISDNLOOP_MAX_SQUEUE) - return 0; - spin_lock_irqsave(&card->isdnloop_lock, flags); - nskb = dev_alloc_skb(skb->len); - if (nskb) { - skb_copy_from_linear_data(skb, - skb_put(nskb, len), len); - skb_queue_tail(&card->bqueue[channel], nskb); - dev_kfree_skb(skb); - } else - len = 0; - card->sndcount[channel] += len; - spin_unlock_irqrestore(&card->isdnloop_lock, flags); - } - return len; -} - -/* - * Read the messages from the card's ringbuffer - * - * Parameter: - * buf = pointer to buffer. - * len = number of bytes to read. - * user = flag, 1: called from userlevel 0: called from kernel. - * card = pointer to card struct. - * Return: - * number of bytes actually transferred. - */ -static int -isdnloop_readstatus(u_char __user *buf, int len, isdnloop_card *card) -{ - int count; - u_char __user *p; - - for (p = buf, count = 0; count < len; p++, count++) { - if (card->msg_buf_read == card->msg_buf_write) - return count; - if (put_user(*card->msg_buf_read++, p)) - return -EFAULT; - if (card->msg_buf_read > card->msg_buf_end) - card->msg_buf_read = card->msg_buf; - } - return count; -} - -/* - * Simulate a card's response by appending it to the cards - * message queue. - * - * Parameter: - * card = pointer to card struct. - * s = pointer to message-string. - * ch = channel: 0 = generic messages, 1 and 2 = D-channel messages. - * Return: - * 0 on success, 1 on memory squeeze. - */ -static int -isdnloop_fake(isdnloop_card *card, char *s, int ch) -{ - struct sk_buff *skb; - int len = strlen(s) + ((ch >= 0) ? 3 : 0); - skb = dev_alloc_skb(len); - if (!skb) { - printk(KERN_WARNING "isdnloop: Out of memory in isdnloop_fake\n"); - return 1; - } - if (ch >= 0) - sprintf(skb_put(skb, 3), "%02d;", ch); - skb_put_data(skb, s, strlen(s)); - skb_queue_tail(&card->dqueue, skb); - return 0; -} -/* *INDENT-OFF* */ -static isdnloop_stat isdnloop_cmd_table[] = { - {"BCON_R", 0, 1}, /* B-Channel connect */ - {"BCON_I", 0, 17}, /* B-Channel connect ind */ - {"BDIS_R", 0, 2}, /* B-Channel disconnect */ - {"DDIS_R", 0, 3}, /* D-Channel disconnect */ - {"DCON_R", 0, 16}, /* D-Channel connect */ - {"DSCA_R", 0, 4}, /* Dial 1TR6-SPV */ - {"DCAL_R", 0, 5}, /* Dial */ - {"EAZC", 0, 6}, /* Clear EAZ listener */ - {"EAZ", 0, 7}, /* Set EAZ listener */ - {"SEEAZ", 0, 8}, /* Get EAZ listener */ - {"MSN", 0, 9}, /* Set/Clear MSN listener */ - {"MSALL", 0, 10}, /* Set multi MSN listeners */ - {"SETSIL", 0, 11}, /* Set SI list */ - {"SEESIL", 0, 12}, /* Get SI list */ - {"SILC", 0, 13}, /* Clear SI list */ - {"LOCK", 0, -1}, /* LOCK channel */ - {"UNLOCK", 0, -1}, /* UNLOCK channel */ - {"FV2ON", 1, 14}, /* Leased mode on */ - {"FV2OFF", 1, 15}, /* Leased mode off */ - {NULL, 0, -1} -}; -/* *INDENT-ON* */ - - -/* - * Simulate an error-response from a card. - * - * Parameter: - * card = pointer to card struct. - */ -static void -isdnloop_fake_err(isdnloop_card *card) -{ - char buf[64]; - - snprintf(buf, sizeof(buf), "E%s", card->omsg); - isdnloop_fake(card, buf, -1); - isdnloop_fake(card, "NAK", -1); -} - -static u_char ctable_eu[] = {0x00, 0x11, 0x01, 0x12}; -static u_char ctable_1t[] = {0x00, 0x3b, 0x01, 0x3a}; - -/* - * Assemble a simplified cause message depending on the - * D-channel protocol used. - * - * Parameter: - * card = pointer to card struct. - * loc = location: 0 = local, 1 = remote. - * cau = cause: 1 = busy, 2 = nonexistent callerid, 3 = no user responding. - * Return: - * Pointer to buffer containing the assembled message. - */ -static char * -isdnloop_unicause(isdnloop_card *card, int loc, int cau) -{ - static char buf[6]; - - switch (card->ptype) { - case ISDN_PTYPE_EURO: - sprintf(buf, "E%02X%02X", (loc) ? 4 : 2, ctable_eu[cau]); - break; - case ISDN_PTYPE_1TR6: - sprintf(buf, "%02X44", ctable_1t[cau]); - break; - default: - return "0000"; - } - return buf; -} - -/* - * Release a virtual connection. Called from timer interrupt, when - * called party did not respond. - * - * Parameter: - * card = pointer to card struct. - * ch = channel (0-based) - */ -static void -isdnloop_atimeout(isdnloop_card *card, int ch) -{ - unsigned long flags; - char buf[60]; - - spin_lock_irqsave(&card->isdnloop_lock, flags); - if (card->rcard[ch]) { - isdnloop_fake(card->rcard[ch], "DDIS_I", card->rch[ch] + 1); - card->rcard[ch]->rcard[card->rch[ch]] = NULL; - card->rcard[ch] = NULL; - } - isdnloop_fake(card, "DDIS_I", ch + 1); - /* No user responding */ - sprintf(buf, "CAU%s", isdnloop_unicause(card, 1, 3)); - isdnloop_fake(card, buf, ch + 1); - spin_unlock_irqrestore(&card->isdnloop_lock, flags); -} - -/* - * Wrapper for isdnloop_atimeout(). - */ -static void -isdnloop_atimeout0(struct timer_list *t) -{ - isdnloop_card *card = from_timer(card, t, c_timer[0]); - - isdnloop_atimeout(card, 0); -} - -/* - * Wrapper for isdnloop_atimeout(). - */ -static void -isdnloop_atimeout1(struct timer_list *t) -{ - isdnloop_card *card = from_timer(card, t, c_timer[1]); - - isdnloop_atimeout(card, 1); -} - -/* - * Install a watchdog for a user, not responding. - * - * Parameter: - * card = pointer to card struct. - * ch = channel to watch for. - */ -static void -isdnloop_start_ctimer(isdnloop_card *card, int ch) -{ - unsigned long flags; - - spin_lock_irqsave(&card->isdnloop_lock, flags); - timer_setup(&card->c_timer[ch], ch ? isdnloop_atimeout1 - : isdnloop_atimeout0, 0); - card->c_timer[ch].expires = jiffies + ISDNLOOP_TIMER_ALERTWAIT; - add_timer(&card->c_timer[ch]); - spin_unlock_irqrestore(&card->isdnloop_lock, flags); -} - -/* - * Kill a pending channel watchdog. - * - * Parameter: - * card = pointer to card struct. - * ch = channel (0-based). - */ -static void -isdnloop_kill_ctimer(isdnloop_card *card, int ch) -{ - unsigned long flags; - - spin_lock_irqsave(&card->isdnloop_lock, flags); - del_timer(&card->c_timer[ch]); - spin_unlock_irqrestore(&card->isdnloop_lock, flags); -} - -static u_char si2bit[] = {0, 1, 0, 0, 0, 2, 0, 4, 0, 0}; -static u_char bit2si[] = {1, 5, 7}; - -/* - * Try finding a listener for an outgoing call. - * - * Parameter: - * card = pointer to calling card. - * p = pointer to ICN-type setup-string. - * lch = channel of calling card. - * cmd = pointer to struct to be filled when parsing setup. - * Return: - * 0 = found match, alerting should happen. - * 1 = found matching number but it is busy. - * 2 = no matching listener. - * 3 = found matching number but SI does not match. - */ -static int -isdnloop_try_call(isdnloop_card *card, char *p, int lch, isdn_ctrl *cmd) -{ - isdnloop_card *cc = cards; - unsigned long flags; - int ch; - int num_match; - int i; - char *e; - char nbuf[32]; - - isdnloop_parse_setup(p, cmd); - while (cc) { - for (ch = 0; ch < 2; ch++) { - /* Exclude ourself */ - if ((cc == card) && (ch == lch)) - continue; - num_match = 0; - switch (cc->ptype) { - case ISDN_PTYPE_EURO: - for (i = 0; i < 3; i++) - if (!(strcmp(cc->s0num[i], cmd->parm.setup.phone))) - num_match = 1; - break; - case ISDN_PTYPE_1TR6: - e = cc->eazlist[ch]; - while (*e) { - sprintf(nbuf, "%s%c", cc->s0num[0], *e); - if (!(strcmp(nbuf, cmd->parm.setup.phone))) - num_match = 1; - e++; - } - } - if (num_match) { - spin_lock_irqsave(&card->isdnloop_lock, flags); - /* channel idle? */ - if (!(cc->rcard[ch])) { - /* Check SI */ - if (!(si2bit[cmd->parm.setup.si1] & cc->sil[ch])) { - spin_unlock_irqrestore(&card->isdnloop_lock, flags); - return 3; - } - /* ch is idle, si and number matches */ - cc->rcard[ch] = card; - cc->rch[ch] = lch; - card->rcard[lch] = cc; - card->rch[lch] = ch; - spin_unlock_irqrestore(&card->isdnloop_lock, flags); - return 0; - } else { - spin_unlock_irqrestore(&card->isdnloop_lock, flags); - /* num matches, but busy */ - if (ch == 1) - return 1; - } - } - } - cc = cc->next; - } - return 2; -} - -/* - * Depending on D-channel protocol and caller/called, modify - * phone number. - * - * Parameter: - * card = pointer to card struct. - * phone = pointer phone number. - * caller = flag: 1 = caller, 0 = called. - * Return: - * pointer to new phone number. - */ -static char * -isdnloop_vstphone(isdnloop_card *card, char *phone, int caller) -{ - int i; - static char nphone[30]; - - if (!card) { - printk("BUG!!!\n"); - return ""; - } - switch (card->ptype) { - case ISDN_PTYPE_EURO: - if (caller) { - for (i = 0; i < 2; i++) - if (!(strcmp(card->s0num[i], phone))) - return phone; - return card->s0num[0]; - } - return phone; - break; - case ISDN_PTYPE_1TR6: - if (caller) { - sprintf(nphone, "%s%c", card->s0num[0], phone[0]); - return nphone; - } else - return &phone[strlen(phone) - 1]; - break; - } - return ""; -} - -/* - * Parse an ICN-type command string sent to the 'card'. - * Perform misc. actions depending on the command. - * - * Parameter: - * card = pointer to card struct. - */ -static void -isdnloop_parse_cmd(isdnloop_card *card) -{ - char *p = card->omsg; - isdn_ctrl cmd; - char buf[60]; - isdnloop_stat *s = isdnloop_cmd_table; - int action = -1; - int i; - int ch; - - if ((card->omsg[0] != '0') && (card->omsg[2] != ';')) { - isdnloop_fake_err(card); - return; - } - ch = card->omsg[1] - '0'; - if ((ch < 0) || (ch > 2)) { - isdnloop_fake_err(card); - return; - } - p += 3; - while (s->statstr) { - if (!strncmp(p, s->statstr, strlen(s->statstr))) { - action = s->action; - if (s->command && (ch != 0)) { - isdnloop_fake_err(card); - return; - } - break; - } - s++; - } - if (action == -1) - return; - switch (action) { - case 1: - /* 0x;BCON_R */ - if (card->rcard[ch - 1]) { - isdnloop_fake(card->rcard[ch - 1], "BCON_I", - card->rch[ch - 1] + 1); - isdnloop_fake(card, "BCON_C", ch); - } - break; - case 17: - /* 0x;BCON_I */ - if (card->rcard[ch - 1]) { - isdnloop_fake(card->rcard[ch - 1], "BCON_C", - card->rch[ch - 1] + 1); - } - break; - case 2: - /* 0x;BDIS_R */ - isdnloop_fake(card, "BDIS_C", ch); - if (card->rcard[ch - 1]) { - isdnloop_fake(card->rcard[ch - 1], "BDIS_I", - card->rch[ch - 1] + 1); - } - break; - case 16: - /* 0x;DCON_R */ - isdnloop_kill_ctimer(card, ch - 1); - if (card->rcard[ch - 1]) { - isdnloop_kill_ctimer(card->rcard[ch - 1], card->rch[ch - 1]); - isdnloop_fake(card->rcard[ch - 1], "DCON_C", - card->rch[ch - 1] + 1); - isdnloop_fake(card, "DCON_C", ch); - } - break; - case 3: - /* 0x;DDIS_R */ - isdnloop_kill_ctimer(card, ch - 1); - if (card->rcard[ch - 1]) { - isdnloop_kill_ctimer(card->rcard[ch - 1], card->rch[ch - 1]); - isdnloop_fake(card->rcard[ch - 1], "DDIS_I", - card->rch[ch - 1] + 1); - card->rcard[ch - 1] = NULL; - } - isdnloop_fake(card, "DDIS_C", ch); - break; - case 4: - /* 0x;DSCA_Rdd,yy,zz,oo */ - if (card->ptype != ISDN_PTYPE_1TR6) { - isdnloop_fake_err(card); - return; - } - /* Fall through */ - case 5: - /* 0x;DCAL_Rdd,yy,zz,oo */ - p += 6; - switch (isdnloop_try_call(card, p, ch - 1, &cmd)) { - case 0: - /* Alerting */ - sprintf(buf, "D%s_I%s,%02d,%02d,%s", - (action == 4) ? "SCA" : "CAL", - isdnloop_vstphone(card, cmd.parm.setup.eazmsn, 1), - cmd.parm.setup.si1, - cmd.parm.setup.si2, - isdnloop_vstphone(card->rcard[ch - 1], - cmd.parm.setup.phone, 0)); - isdnloop_fake(card->rcard[ch - 1], buf, card->rch[ch - 1] + 1); - /* Fall through */ - case 3: - /* si1 does not match, don't alert but start timer */ - isdnloop_start_ctimer(card, ch - 1); - break; - case 1: - /* Remote busy */ - isdnloop_fake(card, "DDIS_I", ch); - sprintf(buf, "CAU%s", isdnloop_unicause(card, 1, 1)); - isdnloop_fake(card, buf, ch); - break; - case 2: - /* No such user */ - isdnloop_fake(card, "DDIS_I", ch); - sprintf(buf, "CAU%s", isdnloop_unicause(card, 1, 2)); - isdnloop_fake(card, buf, ch); - break; - } - break; - case 6: - /* 0x;EAZC */ - card->eazlist[ch - 1][0] = '\0'; - break; - case 7: - /* 0x;EAZ */ - p += 3; - if (strlen(p) >= sizeof(card->eazlist[0])) - break; - strcpy(card->eazlist[ch - 1], p); - break; - case 8: - /* 0x;SEEAZ */ - sprintf(buf, "EAZ-LIST: %s", card->eazlist[ch - 1]); - isdnloop_fake(card, buf, ch + 1); - break; - case 9: - /* 0x;MSN */ - break; - case 10: - /* 0x;MSNALL */ - break; - case 11: - /* 0x;SETSIL */ - p += 6; - i = 0; - while (strchr("0157", *p)) { - if (i) - card->sil[ch - 1] |= si2bit[*p - '0']; - i = (*p++ == '0'); - } - if (*p) - isdnloop_fake_err(card); - break; - case 12: - /* 0x;SEESIL */ - sprintf(buf, "SIN-LIST: "); - p = buf + 10; - for (i = 0; i < 3; i++) - if (card->sil[ch - 1] & (1 << i)) - p += sprintf(p, "%02d", bit2si[i]); - isdnloop_fake(card, buf, ch + 1); - break; - case 13: - /* 0x;SILC */ - card->sil[ch - 1] = 0; - break; - case 14: - /* 00;FV2ON */ - break; - case 15: - /* 00;FV2OFF */ - break; - } -} - -/* - * Put command-strings into the of the 'card'. In reality, execute them - * right in place by calling isdnloop_parse_cmd(). Also copy every - * command to the read message ringbuffer, preceding it with a '>'. - * These mesagges can be read at /dev/isdnctrl. - * - * Parameter: - * buf = pointer to command buffer. - * len = length of buffer data. - * user = flag: 1 = called form userlevel, 0 called from kernel. - * card = pointer to card struct. - * Return: - * number of bytes transferred (currently always equals len). - */ -static int -isdnloop_writecmd(const u_char *buf, int len, int user, isdnloop_card *card) -{ - int xcount = 0; - int ocount = 1; - isdn_ctrl cmd; - - while (len) { - int count = len; - u_char *p; - u_char msg[0x100]; - - if (count > 255) - count = 255; - if (user) { - if (copy_from_user(msg, buf, count)) - return -EFAULT; - } else - memcpy(msg, buf, count); - isdnloop_putmsg(card, '>'); - for (p = msg; count > 0; count--, p++) { - len--; - xcount++; - isdnloop_putmsg(card, *p); - card->omsg[card->optr] = *p; - if (*p == '\n') { - card->omsg[card->optr] = '\0'; - card->optr = 0; - isdnloop_parse_cmd(card); - if (len) { - isdnloop_putmsg(card, '>'); - ocount++; - } - } else { - if (card->optr < 59) - card->optr++; - } - ocount++; - } - } - cmd.command = ISDN_STAT_STAVAIL; - cmd.driver = card->myid; - cmd.arg = ocount; - card->interface.statcallb(&cmd); - return xcount; -} - -/* - * Delete card's pending timers, send STOP to linklevel - */ -static void -isdnloop_stopcard(isdnloop_card *card) -{ - unsigned long flags; - isdn_ctrl cmd; - - spin_lock_irqsave(&card->isdnloop_lock, flags); - if (card->flags & ISDNLOOP_FLAGS_RUNNING) { - card->flags &= ~ISDNLOOP_FLAGS_RUNNING; - del_timer(&card->st_timer); - del_timer(&card->rb_timer); - del_timer(&card->c_timer[0]); - del_timer(&card->c_timer[1]); - cmd.command = ISDN_STAT_STOP; - cmd.driver = card->myid; - card->interface.statcallb(&cmd); - } - spin_unlock_irqrestore(&card->isdnloop_lock, flags); -} - -/* - * Stop all cards before unload. - */ -static void -isdnloop_stopallcards(void) -{ - isdnloop_card *p = cards; - - while (p) { - isdnloop_stopcard(p); - p = p->next; - } -} - -/* - * Start a 'card'. Simulate card's boot message and set the phone - * number(s) of the virtual 'S0-Interface'. Install D-channel - * poll timer. - * - * Parameter: - * card = pointer to card struct. - * sdefp = pointer to struct holding ioctl parameters. - * Return: - * 0 on success, -E??? otherwise. - */ -static int -isdnloop_start(isdnloop_card *card, isdnloop_sdef *sdefp) -{ - unsigned long flags; - isdnloop_sdef sdef; - int i; - - if (card->flags & ISDNLOOP_FLAGS_RUNNING) - return -EBUSY; - if (copy_from_user((char *) &sdef, (char *) sdefp, sizeof(sdef))) - return -EFAULT; - - for (i = 0; i < 3; i++) { - if (!memchr(sdef.num[i], 0, sizeof(sdef.num[i]))) - return -EINVAL; - } - - spin_lock_irqsave(&card->isdnloop_lock, flags); - switch (sdef.ptype) { - case ISDN_PTYPE_EURO: - if (isdnloop_fake(card, "DRV1.23EC-Q.931-CAPI-CNS-BASIS-20.02.96", - -1)) { - spin_unlock_irqrestore(&card->isdnloop_lock, flags); - return -ENOMEM; - } - card->sil[0] = card->sil[1] = 4; - if (isdnloop_fake(card, "TEI OK", 0)) { - spin_unlock_irqrestore(&card->isdnloop_lock, flags); - return -ENOMEM; - } - for (i = 0; i < 3; i++) { - strlcpy(card->s0num[i], sdef.num[i], - sizeof(card->s0num[0])); - } - break; - case ISDN_PTYPE_1TR6: - if (isdnloop_fake(card, "DRV1.04TC-1TR6-CAPI-CNS-BASIS-29.11.95", - -1)) { - spin_unlock_irqrestore(&card->isdnloop_lock, flags); - return -ENOMEM; - } - card->sil[0] = card->sil[1] = 4; - if (isdnloop_fake(card, "TEI OK", 0)) { - spin_unlock_irqrestore(&card->isdnloop_lock, flags); - return -ENOMEM; - } - strlcpy(card->s0num[0], sdef.num[0], sizeof(card->s0num[0])); - card->s0num[1][0] = '\0'; - card->s0num[2][0] = '\0'; - break; - default: - spin_unlock_irqrestore(&card->isdnloop_lock, flags); - printk(KERN_WARNING "isdnloop: Illegal D-channel protocol %d\n", - sdef.ptype); - return -EINVAL; - } - timer_setup(&card->rb_timer, isdnloop_pollbchan, 0); - timer_setup(&card->st_timer, isdnloop_polldchan, 0); - card->st_timer.expires = jiffies + ISDNLOOP_TIMER_DCREAD; - add_timer(&card->st_timer); - card->flags |= ISDNLOOP_FLAGS_RUNNING; - spin_unlock_irqrestore(&card->isdnloop_lock, flags); - return 0; -} - -/* - * Main handler for commands sent by linklevel. - */ -static int -isdnloop_command(isdn_ctrl *c, isdnloop_card *card) -{ - ulong a; - int i; - char cbuf[80]; - isdn_ctrl cmd; - isdnloop_cdef cdef; - - switch (c->command) { - case ISDN_CMD_IOCTL: - memcpy(&a, c->parm.num, sizeof(ulong)); - switch (c->arg) { - case ISDNLOOP_IOCTL_DEBUGVAR: - return (ulong) card; - case ISDNLOOP_IOCTL_STARTUP: - return isdnloop_start(card, (isdnloop_sdef *) a); - break; - case ISDNLOOP_IOCTL_ADDCARD: - if (copy_from_user((char *)&cdef, - (char *)a, - sizeof(cdef))) - return -EFAULT; - return isdnloop_addcard(cdef.id1); - break; - case ISDNLOOP_IOCTL_LEASEDCFG: - if (a) { - if (!card->leased) { - card->leased = 1; - while (card->ptype == ISDN_PTYPE_UNKNOWN) - schedule_timeout_interruptible(10); - schedule_timeout_interruptible(10); - sprintf(cbuf, "00;FV2ON\n01;EAZ1\n02;EAZ2\n"); - i = isdnloop_writecmd(cbuf, strlen(cbuf), 0, card); - printk(KERN_INFO - "isdnloop: (%s) Leased-line mode enabled\n", - CID); - cmd.command = ISDN_STAT_RUN; - cmd.driver = card->myid; - cmd.arg = 0; - card->interface.statcallb(&cmd); - } - } else { - if (card->leased) { - card->leased = 0; - sprintf(cbuf, "00;FV2OFF\n"); - i = isdnloop_writecmd(cbuf, strlen(cbuf), 0, card); - printk(KERN_INFO - "isdnloop: (%s) Leased-line mode disabled\n", - CID); - cmd.command = ISDN_STAT_RUN; - cmd.driver = card->myid; - cmd.arg = 0; - card->interface.statcallb(&cmd); - } - } - return 0; - default: - return -EINVAL; - } - break; - case ISDN_CMD_DIAL: - if (!(card->flags & ISDNLOOP_FLAGS_RUNNING)) - return -ENODEV; - if (card->leased) - break; - if ((c->arg & 255) < ISDNLOOP_BCH) { - char *p; - char dcode[4]; - - a = c->arg; - p = c->parm.setup.phone; - if (*p == 's' || *p == 'S') { - /* Dial for SPV */ - p++; - strcpy(dcode, "SCA"); - } else - /* Normal Dial */ - strcpy(dcode, "CAL"); - snprintf(cbuf, sizeof(cbuf), - "%02d;D%s_R%s,%02d,%02d,%s\n", (int) (a + 1), - dcode, p, c->parm.setup.si1, - c->parm.setup.si2, c->parm.setup.eazmsn); - i = isdnloop_writecmd(cbuf, strlen(cbuf), 0, card); - } - break; - case ISDN_CMD_ACCEPTD: - if (!(card->flags & ISDNLOOP_FLAGS_RUNNING)) - return -ENODEV; - if (c->arg < ISDNLOOP_BCH) { - a = c->arg + 1; - cbuf[0] = 0; - switch (card->l2_proto[a - 1]) { - case ISDN_PROTO_L2_X75I: - sprintf(cbuf, "%02d;BX75\n", (int) a); - break; -#ifdef CONFIG_ISDN_X25 - case ISDN_PROTO_L2_X25DTE: - sprintf(cbuf, "%02d;BX2T\n", (int) a); - break; - case ISDN_PROTO_L2_X25DCE: - sprintf(cbuf, "%02d;BX2C\n", (int) a); - break; -#endif - case ISDN_PROTO_L2_HDLC: - sprintf(cbuf, "%02d;BTRA\n", (int) a); - break; - } - if (strlen(cbuf)) - i = isdnloop_writecmd(cbuf, strlen(cbuf), 0, card); - sprintf(cbuf, "%02d;DCON_R\n", (int) a); - i = isdnloop_writecmd(cbuf, strlen(cbuf), 0, card); - } - break; - case ISDN_CMD_ACCEPTB: - if (!(card->flags & ISDNLOOP_FLAGS_RUNNING)) - return -ENODEV; - if (c->arg < ISDNLOOP_BCH) { - a = c->arg + 1; - switch (card->l2_proto[a - 1]) { - case ISDN_PROTO_L2_X75I: - sprintf(cbuf, "%02d;BCON_R,BX75\n", (int) a); - break; -#ifdef CONFIG_ISDN_X25 - case ISDN_PROTO_L2_X25DTE: - sprintf(cbuf, "%02d;BCON_R,BX2T\n", (int) a); - break; - case ISDN_PROTO_L2_X25DCE: - sprintf(cbuf, "%02d;BCON_R,BX2C\n", (int) a); - break; -#endif - case ISDN_PROTO_L2_HDLC: - sprintf(cbuf, "%02d;BCON_R,BTRA\n", (int) a); - break; - default: - sprintf(cbuf, "%02d;BCON_R\n", (int) a); - } - printk(KERN_DEBUG "isdnloop writecmd '%s'\n", cbuf); - i = isdnloop_writecmd(cbuf, strlen(cbuf), 0, card); - break; - case ISDN_CMD_HANGUP: - if (!(card->flags & ISDNLOOP_FLAGS_RUNNING)) - return -ENODEV; - if (c->arg < ISDNLOOP_BCH) { - a = c->arg + 1; - sprintf(cbuf, "%02d;BDIS_R\n%02d;DDIS_R\n", (int) a, (int) a); - i = isdnloop_writecmd(cbuf, strlen(cbuf), 0, card); - } - break; - case ISDN_CMD_SETEAZ: - if (!(card->flags & ISDNLOOP_FLAGS_RUNNING)) - return -ENODEV; - if (card->leased) - break; - if (c->arg < ISDNLOOP_BCH) { - a = c->arg + 1; - if (card->ptype == ISDN_PTYPE_EURO) { - sprintf(cbuf, "%02d;MS%s%s\n", (int) a, - c->parm.num[0] ? "N" : "ALL", c->parm.num); - } else - sprintf(cbuf, "%02d;EAZ%s\n", (int) a, - c->parm.num[0] ? c->parm.num : (u_char *) "0123456789"); - i = isdnloop_writecmd(cbuf, strlen(cbuf), 0, card); - } - break; - case ISDN_CMD_CLREAZ: - if (!(card->flags & ISDNLOOP_FLAGS_RUNNING)) - return -ENODEV; - if (card->leased) - break; - if (c->arg < ISDNLOOP_BCH) { - a = c->arg + 1; - if (card->ptype == ISDN_PTYPE_EURO) - sprintf(cbuf, "%02d;MSNC\n", (int) a); - else - sprintf(cbuf, "%02d;EAZC\n", (int) a); - i = isdnloop_writecmd(cbuf, strlen(cbuf), 0, card); - } - break; - case ISDN_CMD_SETL2: - if (!(card->flags & ISDNLOOP_FLAGS_RUNNING)) - return -ENODEV; - if ((c->arg & 255) < ISDNLOOP_BCH) { - a = c->arg; - switch (a >> 8) { - case ISDN_PROTO_L2_X75I: - sprintf(cbuf, "%02d;BX75\n", (int) (a & 255) + 1); - break; -#ifdef CONFIG_ISDN_X25 - case ISDN_PROTO_L2_X25DTE: - sprintf(cbuf, "%02d;BX2T\n", (int) (a & 255) + 1); - break; - case ISDN_PROTO_L2_X25DCE: - sprintf(cbuf, "%02d;BX2C\n", (int) (a & 255) + 1); - break; -#endif - case ISDN_PROTO_L2_HDLC: - sprintf(cbuf, "%02d;BTRA\n", (int) (a & 255) + 1); - break; - case ISDN_PROTO_L2_TRANS: - sprintf(cbuf, "%02d;BTRA\n", (int) (a & 255) + 1); - break; - default: - return -EINVAL; - } - i = isdnloop_writecmd(cbuf, strlen(cbuf), 0, card); - card->l2_proto[a & 255] = (a >> 8); - } - break; - case ISDN_CMD_SETL3: - if (!(card->flags & ISDNLOOP_FLAGS_RUNNING)) - return -ENODEV; - return 0; - default: - return -EINVAL; - } - } - return 0; -} - -/* - * Find card with given driverId - */ -static inline isdnloop_card * -isdnloop_findcard(int driverid) -{ - isdnloop_card *p = cards; - - while (p) { - if (p->myid == driverid) - return p; - p = p->next; - } - return (isdnloop_card *) 0; -} - -/* - * Wrapper functions for interface to linklevel - */ -static int -if_command(isdn_ctrl *c) -{ - isdnloop_card *card = isdnloop_findcard(c->driver); - - if (card) - return isdnloop_command(c, card); - printk(KERN_ERR - "isdnloop: if_command called with invalid driverId!\n"); - return -ENODEV; -} - -static int -if_writecmd(const u_char __user *buf, int len, int id, int channel) -{ - isdnloop_card *card = isdnloop_findcard(id); - - if (card) { - if (!(card->flags & ISDNLOOP_FLAGS_RUNNING)) - return -ENODEV; - return isdnloop_writecmd(buf, len, 1, card); - } - printk(KERN_ERR - "isdnloop: if_writecmd called with invalid driverId!\n"); - return -ENODEV; -} - -static int -if_readstatus(u_char __user *buf, int len, int id, int channel) -{ - isdnloop_card *card = isdnloop_findcard(id); - - if (card) { - if (!(card->flags & ISDNLOOP_FLAGS_RUNNING)) - return -ENODEV; - return isdnloop_readstatus(buf, len, card); - } - printk(KERN_ERR - "isdnloop: if_readstatus called with invalid driverId!\n"); - return -ENODEV; -} - -static int -if_sendbuf(int id, int channel, int ack, struct sk_buff *skb) -{ - isdnloop_card *card = isdnloop_findcard(id); - - if (card) { - if (!(card->flags & ISDNLOOP_FLAGS_RUNNING)) - return -ENODEV; - /* ack request stored in skb scratch area */ - *(skb->head) = ack; - return isdnloop_sendbuf(channel, skb, card); - } - printk(KERN_ERR - "isdnloop: if_sendbuf called with invalid driverId!\n"); - return -ENODEV; -} - -/* - * Allocate a new card-struct, initialize it - * link it into cards-list and register it at linklevel. - */ -static isdnloop_card * -isdnloop_initcard(char *id) -{ - isdnloop_card *card; - int i; - card = kzalloc(sizeof(isdnloop_card), GFP_KERNEL); - if (!card) { - printk(KERN_WARNING - "isdnloop: (%s) Could not allocate card-struct.\n", id); - return (isdnloop_card *) 0; - } - card->interface.owner = THIS_MODULE; - card->interface.channels = ISDNLOOP_BCH; - card->interface.hl_hdrlen = 1; /* scratch area for storing ack flag*/ - card->interface.maxbufsize = 4000; - card->interface.command = if_command; - card->interface.writebuf_skb = if_sendbuf; - card->interface.writecmd = if_writecmd; - card->interface.readstat = if_readstatus; - card->interface.features = ISDN_FEATURE_L2_X75I | -#ifdef CONFIG_ISDN_X25 - ISDN_FEATURE_L2_X25DTE | - ISDN_FEATURE_L2_X25DCE | -#endif - ISDN_FEATURE_L2_HDLC | - ISDN_FEATURE_L3_TRANS | - ISDN_FEATURE_P_UNKNOWN; - card->ptype = ISDN_PTYPE_UNKNOWN; - strlcpy(card->interface.id, id, sizeof(card->interface.id)); - card->msg_buf_write = card->msg_buf; - card->msg_buf_read = card->msg_buf; - card->msg_buf_end = &card->msg_buf[sizeof(card->msg_buf) - 1]; - for (i = 0; i < ISDNLOOP_BCH; i++) { - card->l2_proto[i] = ISDN_PROTO_L2_X75I; - skb_queue_head_init(&card->bqueue[i]); - } - skb_queue_head_init(&card->dqueue); - spin_lock_init(&card->isdnloop_lock); - card->next = cards; - cards = card; - if (!register_isdn(&card->interface)) { - cards = cards->next; - printk(KERN_WARNING - "isdnloop: Unable to register %s\n", id); - kfree(card); - return (isdnloop_card *) 0; - } - card->myid = card->interface.channels; - return card; -} - -static int -isdnloop_addcard(char *id1) -{ - isdnloop_card *card; - card = isdnloop_initcard(id1); - if (!card) { - return -EIO; - } - printk(KERN_INFO - "isdnloop: (%s) virtual card added\n", - card->interface.id); - return 0; -} - -static int __init -isdnloop_init(void) -{ - if (isdnloop_id) - return isdnloop_addcard(isdnloop_id); - - return 0; -} - -static void __exit -isdnloop_exit(void) -{ - isdn_ctrl cmd; - isdnloop_card *card = cards; - isdnloop_card *last; - int i; - - isdnloop_stopallcards(); - while (card) { - cmd.command = ISDN_STAT_UNLOAD; - cmd.driver = card->myid; - card->interface.statcallb(&cmd); - for (i = 0; i < ISDNLOOP_BCH; i++) - isdnloop_free_queue(card, i); - card = card->next; - } - card = cards; - while (card) { - last = card; - skb_queue_purge(&card->dqueue); - card = card->next; - kfree(last); - } - printk(KERN_NOTICE "isdnloop-ISDN-driver unloaded\n"); -} - -module_init(isdnloop_init); -module_exit(isdnloop_exit); diff --git a/drivers/isdn/isdnloop/isdnloop.h b/drivers/isdn/isdnloop/isdnloop.h deleted file mode 100644 index e9e035552bb4..000000000000 --- a/drivers/isdn/isdnloop/isdnloop.h +++ /dev/null @@ -1,112 +0,0 @@ -/* $Id: isdnloop.h,v 1.5.6.3 2001/09/23 22:24:56 kai Exp $ - * - * Loopback lowlevel module for testing of linklevel. - * - * Copyright 1997 by Fritz Elfert (fritz@isdn4linux.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#ifndef isdnloop_h -#define isdnloop_h - -#define ISDNLOOP_IOCTL_DEBUGVAR 0 -#define ISDNLOOP_IOCTL_ADDCARD 1 -#define ISDNLOOP_IOCTL_LEASEDCFG 2 -#define ISDNLOOP_IOCTL_STARTUP 3 - -/* Struct for adding new cards */ -typedef struct isdnloop_cdef { - char id1[10]; -} isdnloop_cdef; - -/* Struct for configuring cards */ -typedef struct isdnloop_sdef { - int ptype; - char num[3][20]; -} isdnloop_sdef; - -#if defined(__KERNEL__) || defined(__DEBUGVAR__) - -#ifdef __KERNEL__ -/* Kernel includes */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#endif /* __KERNEL__ */ - -#define ISDNLOOP_FLAGS_B1ACTIVE 1 /* B-Channel-1 is open */ -#define ISDNLOOP_FLAGS_B2ACTIVE 2 /* B-Channel-2 is open */ -#define ISDNLOOP_FLAGS_RUNNING 4 /* Cards driver activated */ -#define ISDNLOOP_FLAGS_RBTIMER 8 /* scheduling of B-Channel-poll */ -#define ISDNLOOP_TIMER_BCREAD 1 /* B-Channel poll-cycle */ -#define ISDNLOOP_TIMER_DCREAD (HZ/2) /* D-Channel poll-cycle */ -#define ISDNLOOP_TIMER_ALERTWAIT (10 * HZ) /* Alert timeout */ -#define ISDNLOOP_MAX_SQUEUE 65536 /* Max. outstanding send-data */ -#define ISDNLOOP_BCH 2 /* channels per card */ - -/* - * Per card driver data - */ -typedef struct isdnloop_card { - struct isdnloop_card *next; /* Pointer to next device struct */ - struct isdnloop_card - *rcard[ISDNLOOP_BCH]; /* Pointer to 'remote' card */ - int rch[ISDNLOOP_BCH]; /* 'remote' channel */ - int myid; /* Driver-Nr. assigned by linklevel */ - int leased; /* Flag: This Adapter is connected */ - /* to a leased line */ - int sil[ISDNLOOP_BCH]; /* SI's to listen for */ - char eazlist[ISDNLOOP_BCH][11]; - /* EAZ's to listen for */ - char s0num[3][20]; /* 1TR6 base-number or MSN's */ - unsigned short flags; /* Statusflags */ - int ptype; /* Protocol type (1TR6 or Euro) */ - struct timer_list st_timer; /* Timer for Status-Polls */ - struct timer_list rb_timer; /* Timer for B-Channel-Polls */ - struct timer_list - c_timer[ISDNLOOP_BCH]; /* Timer for Alerting */ - int l2_proto[ISDNLOOP_BCH]; /* Current layer-2-protocol */ - isdn_if interface; /* Interface to upper layer */ - int iptr; /* Index to imsg-buffer */ - char imsg[60]; /* Internal buf for status-parsing */ - int optr; /* Index to omsg-buffer */ - char omsg[60]; /* Internal buf for cmd-parsing */ - char msg_buf[2048]; /* Buffer for status-messages */ - char *msg_buf_write; /* Writepointer for statusbuffer */ - char *msg_buf_read; /* Readpointer for statusbuffer */ - char *msg_buf_end; /* Pointer to end of statusbuffer */ - int sndcount[ISDNLOOP_BCH]; /* Byte-counters for B-Ch.-send */ - struct sk_buff_head - bqueue[ISDNLOOP_BCH]; /* B-Channel queues */ - struct sk_buff_head dqueue; /* D-Channel queue */ - spinlock_t isdnloop_lock; -} isdnloop_card; - -/* - * Main driver data - */ -#ifdef __KERNEL__ -static isdnloop_card *cards = (isdnloop_card *) 0; -#endif /* __KERNEL__ */ - -/* Utility-Macros */ - -#define CID (card->interface.id) - -#endif /* defined(__KERNEL__) || defined(__DEBUGVAR__) */ -#endif /* isdnloop_h */ diff --git a/include/linux/concap.h b/include/linux/concap.h deleted file mode 100644 index 977acb3d1fb2..000000000000 --- a/include/linux/concap.h +++ /dev/null @@ -1,112 +0,0 @@ -/* $Id: concap.h,v 1.3.2.2 2004/01/12 23:08:35 keil Exp $ - * - * Copyright 1997 by Henner Eisen - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - */ - -#ifndef _LINUX_CONCAP_H -#define _LINUX_CONCAP_H - -#include -#include - -/* Stuff to support encapsulation protocols genericly. The encapsulation - protocol is processed at the uppermost layer of the network interface. - - Based on a ideas developed in a 'synchronous device' thread in the - linux-x25 mailing list contributed by Alan Cox, Thomasz Motylewski - and Jonathan Naylor. - - For more documetation on this refer to Documentation/isdn/README.concap -*/ - -struct concap_proto_ops; -struct concap_device_ops; - -/* this manages all data needed by the encapsulation protocol - */ -struct concap_proto{ - struct net_device *net_dev; /* net device using our service */ - struct concap_device_ops *dops; /* callbacks provided by device */ - struct concap_proto_ops *pops; /* callbacks provided by us */ - spinlock_t lock; - int flags; - void *proto_data; /* protocol specific private data, to - be accessed via *pops methods only*/ - /* - : - whatever - : - */ -}; - -/* Operations to be supported by the net device. Called by the encapsulation - * protocol entity. No receive method is offered because the encapsulation - * protocol directly calls netif_rx(). - */ -struct concap_device_ops{ - - /* to request data is submitted by device*/ - int (*data_req)(struct concap_proto *, struct sk_buff *); - - /* Control methods must be set to NULL by devices which do not - support connection control.*/ - /* to request a connection is set up */ - int (*connect_req)(struct concap_proto *); - - /* to request a connection is released */ - int (*disconn_req)(struct concap_proto *); -}; - -/* Operations to be supported by the encapsulation protocol. Called by - * device driver. - */ -struct concap_proto_ops{ - - /* create a new encapsulation protocol instance of same type */ - struct concap_proto * (*proto_new) (void); - - /* delete encapsulation protocol instance and free all its resources. - cprot may no loger be referenced after calling this */ - void (*proto_del)(struct concap_proto *cprot); - - /* initialize the protocol's data. To be called at interface startup - or when the device driver resets the interface. All services of the - encapsulation protocol may be used after this*/ - int (*restart)(struct concap_proto *cprot, - struct net_device *ndev, - struct concap_device_ops *dops); - - /* inactivate an encapsulation protocol instance. The encapsulation - protocol may not call any *dops methods after this. */ - int (*close)(struct concap_proto *cprot); - - /* process a frame handed down to us by upper layer */ - int (*encap_and_xmit)(struct concap_proto *cprot, struct sk_buff *skb); - - /* to be called for each data entity received from lower layer*/ - int (*data_ind)(struct concap_proto *cprot, struct sk_buff *skb); - - /* to be called when a connection was set up/down. - Protocols that don't process these primitives might fill in - dummy methods here */ - int (*connect_ind)(struct concap_proto *cprot); - int (*disconn_ind)(struct concap_proto *cprot); - /* - Some network device support functions, like net_header(), rebuild_header(), - and others, that depend solely on the encapsulation protocol, might - be provided here, too. The net device would just fill them in its - corresponding fields when it is opened. - */ -}; - -/* dummy restart/close/connect/reset/disconn methods - */ -extern int concap_nop(struct concap_proto *cprot); - -/* dummy submit method - */ -extern int concap_drop_skb(struct concap_proto *cprot, struct sk_buff *skb); -#endif diff --git a/include/linux/isdn.h b/include/linux/isdn.h deleted file mode 100644 index df97c8444f5d..000000000000 --- a/include/linux/isdn.h +++ /dev/null @@ -1,473 +0,0 @@ -/* $Id: isdn.h,v 1.125.2.3 2004/02/10 01:07:14 keil Exp $ - * - * Main header for the Linux ISDN subsystem (linklevel). - * - * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de) - * Copyright 1995,96 by Thinking Objects Software GmbH Wuerzburg - * Copyright 1995,96 by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ -#ifndef __ISDN_H__ -#define __ISDN_H__ - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define ISDN_TTY_MAJOR 43 -#define ISDN_TTYAUX_MAJOR 44 -#define ISDN_MAJOR 45 - -/* The minor-devicenumbers for Channel 0 and 1 are used as arguments for - * physical Channel-Mapping, so they MUST NOT be changed without changing - * the correspondent code in isdn.c - */ - -#define ISDN_MINOR_B 0 -#define ISDN_MINOR_BMAX (ISDN_MAX_CHANNELS-1) -#define ISDN_MINOR_CTRL 64 -#define ISDN_MINOR_CTRLMAX (64 + (ISDN_MAX_CHANNELS-1)) -#define ISDN_MINOR_PPP 128 -#define ISDN_MINOR_PPPMAX (128 + (ISDN_MAX_CHANNELS-1)) -#define ISDN_MINOR_STATUS 255 - -#ifdef CONFIG_ISDN_PPP - -#ifdef CONFIG_ISDN_PPP_VJ -# include -#endif - -#include -#include - -#include -#endif - -#ifdef CONFIG_ISDN_X25 -# include -#endif - -#include - -#define ISDN_DRVIOCTL_MASK 0x7f /* Mask for Device-ioctl */ - -/* Until now unused */ -#define ISDN_SERVICE_VOICE 1 -#define ISDN_SERVICE_AB 1<<1 -#define ISDN_SERVICE_X21 1<<2 -#define ISDN_SERVICE_G4 1<<3 -#define ISDN_SERVICE_BTX 1<<4 -#define ISDN_SERVICE_DFUE 1<<5 -#define ISDN_SERVICE_X25 1<<6 -#define ISDN_SERVICE_TTX 1<<7 -#define ISDN_SERVICE_MIXED 1<<8 -#define ISDN_SERVICE_FW 1<<9 -#define ISDN_SERVICE_GTEL 1<<10 -#define ISDN_SERVICE_BTXN 1<<11 -#define ISDN_SERVICE_BTEL 1<<12 - -/* Macros checking plain usage */ -#define USG_NONE(x) ((x & ISDN_USAGE_MASK)==ISDN_USAGE_NONE) -#define USG_RAW(x) ((x & ISDN_USAGE_MASK)==ISDN_USAGE_RAW) -#define USG_MODEM(x) ((x & ISDN_USAGE_MASK)==ISDN_USAGE_MODEM) -#define USG_VOICE(x) ((x & ISDN_USAGE_MASK)==ISDN_USAGE_VOICE) -#define USG_NET(x) ((x & ISDN_USAGE_MASK)==ISDN_USAGE_NET) -#define USG_FAX(x) ((x & ISDN_USAGE_MASK)==ISDN_USAGE_FAX) -#define USG_OUTGOING(x) ((x & ISDN_USAGE_OUTGOING)==ISDN_USAGE_OUTGOING) -#define USG_MODEMORVOICE(x) (((x & ISDN_USAGE_MASK)==ISDN_USAGE_MODEM) || \ - ((x & ISDN_USAGE_MASK)==ISDN_USAGE_VOICE) ) - -/* Timer-delays and scheduling-flags */ -#define ISDN_TIMER_RES 4 /* Main Timer-Resolution */ -#define ISDN_TIMER_02SEC (HZ/ISDN_TIMER_RES/5) /* Slow-Timer1 .2 sec */ -#define ISDN_TIMER_1SEC (HZ/ISDN_TIMER_RES) /* Slow-Timer2 1 sec */ -#define ISDN_TIMER_RINGING 5 /* tty RINGs = ISDN_TIMER_1SEC * this factor */ -#define ISDN_TIMER_KEEPINT 10 /* Cisco-Keepalive = ISDN_TIMER_1SEC * this factor */ -#define ISDN_TIMER_MODEMREAD 1 -#define ISDN_TIMER_MODEMPLUS 2 -#define ISDN_TIMER_MODEMRING 4 -#define ISDN_TIMER_MODEMXMIT 8 -#define ISDN_TIMER_NETDIAL 16 -#define ISDN_TIMER_NETHANGUP 32 -#define ISDN_TIMER_CARRIER 256 /* Wait for Carrier */ -#define ISDN_TIMER_FAST (ISDN_TIMER_MODEMREAD | ISDN_TIMER_MODEMPLUS | \ - ISDN_TIMER_MODEMXMIT) -#define ISDN_TIMER_SLOW (ISDN_TIMER_MODEMRING | ISDN_TIMER_NETHANGUP | \ - ISDN_TIMER_NETDIAL | ISDN_TIMER_CARRIER) - -/* Timeout-Values for isdn_net_dial() */ -#define ISDN_TIMER_DTIMEOUT10 (10*HZ/(ISDN_TIMER_02SEC*(ISDN_TIMER_RES+1))) -#define ISDN_TIMER_DTIMEOUT15 (15*HZ/(ISDN_TIMER_02SEC*(ISDN_TIMER_RES+1))) -#define ISDN_TIMER_DTIMEOUT60 (60*HZ/(ISDN_TIMER_02SEC*(ISDN_TIMER_RES+1))) - -/* GLOBAL_FLAGS */ -#define ISDN_GLOBAL_STOPPED 1 - -/*=================== Start of ip-over-ISDN stuff =========================*/ - -/* Feature- and status-flags for a net-interface */ -#define ISDN_NET_CONNECTED 0x01 /* Bound to ISDN-Channel */ -#define ISDN_NET_SECURE 0x02 /* Accept calls from phonelist only */ -#define ISDN_NET_CALLBACK 0x04 /* activate callback */ -#define ISDN_NET_CBHUP 0x08 /* hangup before callback */ -#define ISDN_NET_CBOUT 0x10 /* remote machine does callback */ - -#define ISDN_NET_MAGIC 0x49344C02 /* for paranoia-checking */ - -/* Phone-list-element */ -typedef struct { - void *next; - char num[ISDN_MSNLEN]; -} isdn_net_phone; - -/* - Principles when extending structures for generic encapsulation protocol - ("concap") support: - - Stuff which is hardware specific (here i4l-specific) goes in - the netdev -> local structure (here: isdn_net_local) - - Stuff which is encapsulation protocol specific goes in the structure - which holds the linux device structure (here: isdn_net_device) -*/ - -/* Local interface-data */ -typedef struct isdn_net_local_s { - ulong magic; - struct net_device_stats stats; /* Ethernet Statistics */ - int isdn_device; /* Index to isdn-device */ - int isdn_channel; /* Index to isdn-channel */ - int ppp_slot; /* PPPD device slot number */ - int pre_device; /* Preselected isdn-device */ - int pre_channel; /* Preselected isdn-channel */ - int exclusive; /* If non-zero idx to reserved chan.*/ - int flags; /* Connection-flags */ - int dialretry; /* Counter for Dialout-retries */ - int dialmax; /* Max. Number of Dial-retries */ - int cbdelay; /* Delay before Callback starts */ - int dtimer; /* Timeout-counter for dialing */ - char msn[ISDN_MSNLEN]; /* MSNs/EAZs for this interface */ - u_char cbhup; /* Flag: Reject Call before Callback*/ - u_char dialstate; /* State for dialing */ - u_char p_encap; /* Packet encapsulation */ - /* 0 = Ethernet over ISDN */ - /* 1 = RAW-IP */ - /* 2 = IP with type field */ - u_char l2_proto; /* Layer-2-protocol */ - /* See ISDN_PROTO_L2..-constants in */ - /* isdnif.h */ - /* 0 = X75/LAPB with I-Frames */ - /* 1 = X75/LAPB with UI-Frames */ - /* 2 = X75/LAPB with BUI-Frames */ - /* 3 = HDLC */ - u_char l3_proto; /* Layer-3-protocol */ - /* See ISDN_PROTO_L3..-constants in */ - /* isdnif.h */ - /* 0 = Transparent */ - int huptimer; /* Timeout-counter for auto-hangup */ - int charge; /* Counter for charging units */ - ulong chargetime; /* Timer for Charging info */ - int hupflags; /* Flags for charge-unit-hangup: */ - /* bit0: chargeint is invalid */ - /* bit1: Getting charge-interval */ - /* bit2: Do charge-unit-hangup */ - /* bit3: Do hangup even on incoming */ - int outgoing; /* Flag: outgoing call */ - int onhtime; /* Time to keep link up */ - int chargeint; /* Interval between charge-infos */ - int onum; /* Flag: at least 1 outgoing number */ - int cps; /* current speed of this interface */ - int transcount; /* byte-counter for cps-calculation */ - int sqfull; /* Flag: netdev-queue overloaded */ - ulong sqfull_stamp; /* Start-Time of overload */ - ulong slavedelay; /* Dynamic bundling delaytime */ - int triggercps; /* BogoCPS needed for trigger slave */ - isdn_net_phone *phone[2]; /* List of remote-phonenumbers */ - /* phone[0] = Incoming Numbers */ - /* phone[1] = Outgoing Numbers */ - isdn_net_phone *dial; /* Pointer to dialed number */ - struct net_device *master; /* Ptr to Master device for slaves */ - struct net_device *slave; /* Ptr to Slave device for masters */ - struct isdn_net_local_s *next; /* Ptr to next link in bundle */ - struct isdn_net_local_s *last; /* Ptr to last link in bundle */ - struct isdn_net_dev_s *netdev; /* Ptr to netdev */ - struct sk_buff_head super_tx_queue; /* List of supervisory frames to */ - /* be transmitted asap */ - atomic_t frame_cnt; /* number of frames currently */ - /* queued in HL driver */ - /* Ptr to orig. hard_header_cache */ - spinlock_t xmit_lock; /* used to protect the xmit path of */ - /* a particular channel (including */ - /* the frame_cnt */ - - int pppbind; /* ippp device for bindings */ - int dialtimeout; /* How long shall we try on dialing? (jiffies) */ - int dialwait; /* How long shall we wait after failed attempt? (jiffies) */ - ulong dialstarted; /* jiffies of first dialing-attempt */ - ulong dialwait_timer; /* jiffies of earliest next dialing-attempt */ - int huptimeout; /* How long will the connection be up? (seconds) */ -#ifdef CONFIG_ISDN_X25 - struct concap_device_ops *dops; /* callbacks used by encapsulator */ -#endif - /* use an own struct for that in later versions */ - ulong cisco_myseq; /* Local keepalive seq. for Cisco */ - ulong cisco_mineseen; /* returned keepalive seq. from remote */ - ulong cisco_yourseq; /* Remote keepalive seq. for Cisco */ - int cisco_keepalive_period; /* keepalive period */ - ulong cisco_last_slarp_in; /* jiffie of last keepalive packet we received */ - char cisco_line_state; /* state of line according to keepalive packets */ - char cisco_debserint; /* debugging flag of cisco hdlc with slarp */ - struct timer_list cisco_timer; - struct work_struct tqueue; -} isdn_net_local; - -/* the interface itself */ -typedef struct isdn_net_dev_s { - isdn_net_local *local; - isdn_net_local *queue; /* circular list of all bundled - channels, which are currently - online */ - spinlock_t queue_lock; /* lock to protect queue */ - void *next; /* Pointer to next isdn-interface */ - struct net_device *dev; /* interface to upper levels */ -#ifdef CONFIG_ISDN_PPP - ippp_bundle * pb; /* pointer to the common bundle structure - * with the per-bundle data */ -#endif -#ifdef CONFIG_ISDN_X25 - struct concap_proto *cprot; /* connection oriented encapsulation protocol */ -#endif - -} isdn_net_dev; - -/*===================== End of ip-over-ISDN stuff ===========================*/ - -/*======================= Start of ISDN-tty stuff ===========================*/ - -#define ISDN_ASYNC_MAGIC 0x49344C01 /* for paranoia-checking */ -#define ISDN_SERIAL_XMIT_SIZE 1024 /* Default bufsize for write */ -#define ISDN_SERIAL_XMIT_MAX 4000 /* Maximum bufsize for write */ - -#ifdef CONFIG_ISDN_AUDIO -/* For using sk_buffs with audio we need some private variables - * within each sk_buff. For this purpose, we declare a struct here, - * and put it always at the private skb->cb data array. A few macros help - * accessing the variables. - */ -typedef struct _isdn_audio_data { - unsigned short dle_count; - unsigned char lock; -} isdn_audio_data_t; - -#define ISDN_AUDIO_SKB_DLECOUNT(skb) (((isdn_audio_data_t *)&skb->cb[0])->dle_count) -#define ISDN_AUDIO_SKB_LOCK(skb) (((isdn_audio_data_t *)&skb->cb[0])->lock) -#endif - -/* Private data of AT-command-interpreter */ -typedef struct atemu { - u_char profile[ISDN_MODEM_NUMREG]; /* Modem-Regs. Profile 0 */ - u_char mdmreg[ISDN_MODEM_NUMREG]; /* Modem-Registers */ - char pmsn[ISDN_MSNLEN]; /* EAZ/MSNs Profile 0 */ - char msn[ISDN_MSNLEN]; /* EAZ/MSN */ - char plmsn[ISDN_LMSNLEN]; /* Listening MSNs Profile 0 */ - char lmsn[ISDN_LMSNLEN]; /* Listening MSNs */ - char cpn[ISDN_MSNLEN]; /* CalledPartyNumber on incoming call */ - char connmsg[ISDN_CMSGLEN]; /* CONNECT-Msg from HL-Driver */ -#ifdef CONFIG_ISDN_AUDIO - u_char vpar[10]; /* Voice-parameters */ - int lastDLE; /* Flag for voice-coding: DLE seen */ -#endif - int mdmcmdl; /* Length of Modem-Commandbuffer */ - int pluscount; /* Counter for +++ sequence */ - u_long lastplus; /* Timestamp of last + */ - int carrierwait; /* Seconds of carrier waiting */ - char mdmcmd[255]; /* Modem-Commandbuffer */ - unsigned int charge; /* Charge units of current connection */ -} atemu; - -/* Private data (similar to async_struct in ) */ -typedef struct modem_info { - int magic; - struct tty_port port; - int x_char; /* xon/xoff character */ - int mcr; /* Modem control register */ - int msr; /* Modem status register */ - int lsr; /* Line status register */ - int line; - int online; /* 1 = B-Channel is up, drop data */ - /* 2 = B-Channel is up, deliver d.*/ - int dialing; /* Dial in progress or ATA */ - int closing; - int rcvsched; /* Receive needs schedule */ - int isdn_driver; /* Index to isdn-driver */ - int isdn_channel; /* Index to isdn-channel */ - int drv_index; /* Index to dev->usage */ - int ncarrier; /* Flag: schedule NO CARRIER */ - unsigned char last_cause[8]; /* Last cause message */ - unsigned char last_num[ISDN_MSNLEN]; - /* Last phone-number */ - unsigned char last_l2; /* Last layer-2 protocol */ - unsigned char last_si; /* Last service */ - unsigned char last_lhup; /* Last hangup local? */ - unsigned char last_dir; /* Last direction (in or out) */ - struct timer_list nc_timer; /* Timer for delayed NO CARRIER */ - int send_outstanding;/* # of outstanding send-requests */ - int xmit_size; /* max. # of chars in xmit_buf */ - int xmit_count; /* # of chars in xmit_buf */ - struct sk_buff_head xmit_queue; /* transmit queue */ - atomic_t xmit_lock; /* Semaphore for isdn_tty_write */ -#ifdef CONFIG_ISDN_AUDIO - int vonline; /* Voice-channel status */ - /* Bit 0 = recording */ - /* Bit 1 = playback */ - /* Bit 2 = playback, DLE-ETX seen */ - struct sk_buff_head dtmf_queue; /* queue for dtmf results */ - void *adpcms; /* state for adpcm decompression */ - void *adpcmr; /* state for adpcm compression */ - void *dtmf_state; /* state for dtmf decoder */ - void *silence_state; /* state for silence detection */ -#endif -#ifdef CONFIG_ISDN_TTY_FAX - struct T30_s *fax; /* T30 Fax Group 3 data/interface */ - int faxonline; /* Fax-channel status */ -#endif - atemu emu; /* AT-emulator data */ - spinlock_t readlock; -} modem_info; - -#define ISDN_MODEM_WINSIZE 8 - -/* Description of one ISDN-tty */ -typedef struct _isdn_modem { - int refcount; /* Number of opens */ - struct tty_driver *tty_modem; /* tty-device */ - struct tty_struct *modem_table[ISDN_MAX_CHANNELS]; /* ?? copied from Orig */ - struct ktermios *modem_termios[ISDN_MAX_CHANNELS]; - struct ktermios *modem_termios_locked[ISDN_MAX_CHANNELS]; - modem_info info[ISDN_MAX_CHANNELS]; /* Private data */ -} isdn_modem_t; - -/*======================= End of ISDN-tty stuff ============================*/ - -/*======================== Start of V.110 stuff ============================*/ -#define V110_BUFSIZE 1024 - -typedef struct { - int nbytes; /* 1 Matrixbyte -> nbytes in stream */ - int nbits; /* Number of used bits in streambyte */ - unsigned char key; /* Bitmask in stream eg. 11 (nbits=2) */ - int decodelen; /* Amount of data in decodebuf */ - int SyncInit; /* Number of sync frames to send */ - unsigned char *OnlineFrame; /* Precalculated V110 idle frame */ - unsigned char *OfflineFrame; /* Precalculated V110 sync Frame */ - int framelen; /* Length of frames */ - int skbuser; /* Number of unacked userdata skbs */ - int skbidle; /* Number of unacked idle/sync skbs */ - int introducer; /* Local vars for decoder */ - int dbit; - unsigned char b; - int skbres; /* space to reserve in outgoing skb */ - int maxsize; /* maxbufsize of lowlevel driver */ - unsigned char *encodebuf; /* temporary buffer for encoding */ - unsigned char decodebuf[V110_BUFSIZE]; /* incomplete V110 matrices */ -} isdn_v110_stream; - -/*========================= End of V.110 stuff =============================*/ - -/*======================= Start of general stuff ===========================*/ - -typedef struct { - char *next; - char *private; -} infostruct; - -#define DRV_FLAG_RUNNING 1 -#define DRV_FLAG_REJBUS 2 -#define DRV_FLAG_LOADED 4 - -/* Description of hardware-level-driver */ -typedef struct _isdn_driver { - ulong online; /* Channel-Online flags */ - ulong flags; /* Misc driver Flags */ - int locks; /* Number of locks for this driver */ - int channels; /* Number of channels */ - wait_queue_head_t st_waitq; /* Wait-Queue for status-read's */ - int maxbufsize; /* Maximum Buffersize supported */ - unsigned long pktcount; /* Until now: unused */ - int stavail; /* Chars avail on Status-device */ - isdn_if *interface; /* Interface to driver */ - int *rcverr; /* Error-counters for B-Ch.-receive */ - int *rcvcount; /* Byte-counters for B-Ch.-receive */ -#ifdef CONFIG_ISDN_AUDIO - unsigned long DLEflag; /* Flags: Insert DLE at next read */ -#endif - struct sk_buff_head *rpqueue; /* Pointers to start of Rcv-Queue */ - wait_queue_head_t *rcv_waitq; /* Wait-Queues for B-Channel-Reads */ - wait_queue_head_t *snd_waitq; /* Wait-Queue for B-Channel-Send's */ - char msn2eaz[10][ISDN_MSNLEN]; /* Mapping-Table MSN->EAZ */ -} isdn_driver_t; - -/* Main driver-data */ -typedef struct isdn_devt { - struct module *owner; - spinlock_t lock; - unsigned short flags; /* Bitmapped Flags: */ - int drivers; /* Current number of drivers */ - int channels; /* Current number of channels */ - int net_verbose; /* Verbose-Flag */ - int modempoll; /* Flag: tty-read active */ - spinlock_t timerlock; - int tflags; /* Timer-Flags: */ - /* see ISDN_TIMER_..defines */ - int global_flags; - infostruct *infochain; /* List of open info-devs. */ - wait_queue_head_t info_waitq; /* Wait-Queue for isdninfo */ - struct timer_list timer; /* Misc.-function Timer */ - int chanmap[ISDN_MAX_CHANNELS]; /* Map minor->device-channel */ - int drvmap[ISDN_MAX_CHANNELS]; /* Map minor->driver-index */ - int usage[ISDN_MAX_CHANNELS]; /* Used by tty/ip/voice */ - char num[ISDN_MAX_CHANNELS][ISDN_MSNLEN]; - /* Remote number of active ch.*/ - int m_idx[ISDN_MAX_CHANNELS]; /* Index for mdm.... */ - isdn_driver_t *drv[ISDN_MAX_DRIVERS]; /* Array of drivers */ - isdn_net_dev *netdev; /* Linked list of net-if's */ - char drvid[ISDN_MAX_DRIVERS][20];/* Driver-ID */ - struct task_struct *profd; /* For iprofd */ - isdn_modem_t mdm; /* tty-driver-data */ - isdn_net_dev *rx_netdev[ISDN_MAX_CHANNELS]; /* rx netdev-pointers */ - isdn_net_dev *st_netdev[ISDN_MAX_CHANNELS]; /* stat netdev-pointers */ - ulong ibytes[ISDN_MAX_CHANNELS]; /* Statistics incoming bytes */ - ulong obytes[ISDN_MAX_CHANNELS]; /* Statistics outgoing bytes */ - int v110emu[ISDN_MAX_CHANNELS]; /* V.110 emulator-mode 0=none */ - atomic_t v110use[ISDN_MAX_CHANNELS]; /* Usage-Semaphore for stream */ - isdn_v110_stream *v110[ISDN_MAX_CHANNELS]; /* V.110 private data */ - struct mutex mtx; /* serialize list access*/ - unsigned long global_features; -} isdn_dev; - -extern isdn_dev *dev; - - -#endif /* __ISDN_H__ */ diff --git a/include/linux/isdn_divertif.h b/include/linux/isdn_divertif.h deleted file mode 100644 index 19ab361f9f07..000000000000 --- a/include/linux/isdn_divertif.h +++ /dev/null @@ -1,35 +0,0 @@ -/* $Id: isdn_divertif.h,v 1.4.6.1 2001/09/23 22:25:05 kai Exp $ - * - * Header for the diversion supplementary interface for i4l. - * - * Author Werner Cornelius (werner@titro.de) - * Copyright by Werner Cornelius (werner@titro.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ -#ifndef _LINUX_ISDN_DIVERTIF_H -#define _LINUX_ISDN_DIVERTIF_H - -#include -#include -#include - -/***************************************************************/ -/* structure exchanging data between isdn hl and divert module */ -/***************************************************************/ -typedef struct - { ulong if_magic; /* magic info and version */ - int cmd; /* command */ - int (*stat_callback)(isdn_ctrl *); /* supplied by divert module when calling */ - int (*ll_cmd)(isdn_ctrl *); /* supplied by hl on return */ - char * (*drv_to_name)(int); /* map a driver id to name, supplied by hl */ - int (*name_to_drv)(char *); /* map a driver id to name, supplied by hl */ - } isdn_divert_if; - -/*********************/ -/* function register */ -/*********************/ -extern int DIVERT_REG_NAME(isdn_divert_if *); -#endif /* _LINUX_ISDN_DIVERTIF_H */ diff --git a/include/linux/isdn_ppp.h b/include/linux/isdn_ppp.h deleted file mode 100644 index a0070c6dfaf8..000000000000 --- a/include/linux/isdn_ppp.h +++ /dev/null @@ -1,194 +0,0 @@ -/* Linux ISDN subsystem, sync PPP, interface to ipppd - * - * Copyright 1994-1999 by Fritz Elfert (fritz@isdn4linux.de) - * Copyright 1995,96 Thinking Objects Software GmbH Wuerzburg - * Copyright 1995,96 by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de) - * Copyright 2000-2002 by Kai Germaschewski (kai@germaschewski.name) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ -#ifndef _LINUX_ISDN_PPP_H -#define _LINUX_ISDN_PPP_H - - - - -#ifdef CONFIG_IPPP_FILTER -#include -#endif -#include - -#define DECOMP_ERR_NOMEM (-10) - -#define MP_END_FRAG 0x40 -#define MP_BEGIN_FRAG 0x80 - -#define MP_MAX_QUEUE_LEN 16 - -/* - * We need a way for the decompressor to influence the generation of CCP - * Reset-Requests in a variety of ways. The decompressor is already returning - * a lot of information (generated skb length, error conditions) so we use - * another parameter. This parameter is a pointer to a structure which is - * to be marked valid by the decompressor and only in this case is ever used. - * Furthermore, the only case where this data is used is when the decom- - * pressor returns DECOMP_ERROR. - * - * We use this same struct for the reset entry of the compressor to commu- - * nicate to its caller how to deal with sending of a Reset Ack. In this - * case, expra is not used, but other options still apply (suppressing - * sending with rsend, appending arbitrary data, etc). - */ - -#define IPPP_RESET_MAXDATABYTES 32 - -struct isdn_ppp_resetparams { - unsigned char valid:1; /* rw Is this structure filled at all ? */ - unsigned char rsend:1; /* rw Should we send one at all ? */ - unsigned char idval:1; /* rw Is the id field valid ? */ - unsigned char dtval:1; /* rw Is the data field valid ? */ - unsigned char expra:1; /* rw Is an Ack expected for this Req ? */ - unsigned char id; /* wo Send CCP ResetReq with this id */ - unsigned short maxdlen; /* ro Max bytes to be stored in data field */ - unsigned short dlen; /* rw Bytes stored in data field */ - unsigned char *data; /* wo Data for ResetReq info field */ -}; - -/* - * this is an 'old friend' from ppp-comp.h under a new name - * check the original include for more information - */ -struct isdn_ppp_compressor { - struct isdn_ppp_compressor *next, *prev; - struct module *owner; - int num; /* CCP compression protocol number */ - - void *(*alloc) (struct isdn_ppp_comp_data *); - void (*free) (void *state); - int (*init) (void *state, struct isdn_ppp_comp_data *, - int unit,int debug); - - /* The reset entry needs to get more exact information about the - ResetReq or ResetAck it was called with. The parameters are - obvious. If reset is called without a Req or Ack frame which - could be handed into it, code MUST be set to 0. Using rsparm, - the reset entry can control if and how a ResetAck is returned. */ - - void (*reset) (void *state, unsigned char code, unsigned char id, - unsigned char *data, unsigned len, - struct isdn_ppp_resetparams *rsparm); - - int (*compress) (void *state, struct sk_buff *in, - struct sk_buff *skb_out, int proto); - - int (*decompress) (void *state,struct sk_buff *in, - struct sk_buff *skb_out, - struct isdn_ppp_resetparams *rsparm); - - void (*incomp) (void *state, struct sk_buff *in,int proto); - void (*stat) (void *state, struct compstat *stats); -}; - -extern int isdn_ppp_register_compressor(struct isdn_ppp_compressor *); -extern int isdn_ppp_unregister_compressor(struct isdn_ppp_compressor *); -extern int isdn_ppp_dial_slave(char *); -extern int isdn_ppp_hangup_slave(char *); - -typedef struct { - unsigned long seqerrs; - unsigned long frame_drops; - unsigned long overflows; - unsigned long max_queue_len; -} isdn_mppp_stats; - -typedef struct { - int mp_mrru; /* unused */ - struct sk_buff * frags; /* fragments sl list -- use skb->next */ - long frames; /* number of frames in the frame list */ - unsigned int seq; /* last processed packet seq #: any packets - * with smaller seq # will be dropped - * unconditionally */ - spinlock_t lock; - int ref_ct; - /* statistics */ - isdn_mppp_stats stats; -} ippp_bundle; - -#define NUM_RCV_BUFFS 64 - -struct ippp_buf_queue { - struct ippp_buf_queue *next; - struct ippp_buf_queue *last; - char *buf; /* NULL here indicates end of queue */ - int len; -}; - -/* The data structure for one CCP reset transaction */ -enum ippp_ccp_reset_states { - CCPResetIdle, - CCPResetSentReq, - CCPResetRcvdReq, - CCPResetSentAck, - CCPResetRcvdAck -}; - -struct ippp_ccp_reset_state { - enum ippp_ccp_reset_states state; /* State of this transaction */ - struct ippp_struct *is; /* Backlink to device stuff */ - unsigned char id; /* Backlink id index */ - unsigned char ta:1; /* The timer is active (flag) */ - unsigned char expra:1; /* We expect a ResetAck at all */ - int dlen; /* Databytes stored in data */ - struct timer_list timer; /* For timeouts/retries */ - /* This is a hack but seems sufficient for the moment. We do not want - to have this be yet another allocation for some bytes, it is more - memory management overhead than the whole mess is worth. */ - unsigned char data[IPPP_RESET_MAXDATABYTES]; -}; - -/* The data structure keeping track of the currently outstanding CCP Reset - transactions. */ -struct ippp_ccp_reset { - struct ippp_ccp_reset_state *rs[256]; /* One per possible id */ - unsigned char lastid; /* Last id allocated by the engine */ -}; - -struct ippp_struct { - struct ippp_struct *next_link; - int state; - spinlock_t buflock; - struct ippp_buf_queue rq[NUM_RCV_BUFFS]; /* packet queue for isdn_ppp_read() */ - struct ippp_buf_queue *first; /* pointer to (current) first packet */ - struct ippp_buf_queue *last; /* pointer to (current) last used packet in queue */ - wait_queue_head_t wq; - struct task_struct *tk; - unsigned int mpppcfg; - unsigned int pppcfg; - unsigned int mru; - unsigned int mpmru; - unsigned int mpmtu; - unsigned int maxcid; - struct isdn_net_local_s *lp; - int unit; - int minor; - unsigned int last_link_seqno; - long mp_seqno; -#ifdef CONFIG_ISDN_PPP_VJ - unsigned char *cbuf; - struct slcompress *slcomp; -#endif -#ifdef CONFIG_IPPP_FILTER - struct bpf_prog *pass_filter; /* filter for packets to pass */ - struct bpf_prog *active_filter; /* filter for pkts to reset idle */ -#endif - unsigned long debug; - struct isdn_ppp_compressor *compressor,*decompressor; - struct isdn_ppp_compressor *link_compressor,*link_decompressor; - void *decomp_stat,*comp_stat,*link_decomp_stat,*link_comp_stat; - struct ippp_ccp_reset *reset; /* Allocated on demand, may never be needed */ - unsigned long compflags; -}; - -#endif /* _LINUX_ISDN_PPP_H */ diff --git a/include/linux/isdnif.h b/include/linux/isdnif.h deleted file mode 100644 index 8d80fdc68647..000000000000 --- a/include/linux/isdnif.h +++ /dev/null @@ -1,505 +0,0 @@ -/* $Id: isdnif.h,v 1.43.2.2 2004/01/12 23:08:35 keil Exp $ - * - * Linux ISDN subsystem - * Definition of the interface between the subsystem and its low-level drivers. - * - * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de) - * Copyright 1995,96 Thinking Objects Software GmbH Wuerzburg - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ -#ifndef __ISDNIF_H__ -#define __ISDNIF_H__ - - -#include -#include - -/***************************************************************************/ -/* Extensions made by Werner Cornelius (werner@ikt.de) */ -/* */ -/* The proceed command holds a incoming call in a state to leave processes */ -/* enough time to check whether ist should be accepted. */ -/* The PROT_IO Command extends the interface to make protocol dependent */ -/* features available (call diversion, call waiting...). */ -/* */ -/* The PROT_IO Command is executed with the desired driver id and the arg */ -/* parameter coded as follows: */ -/* The lower 8 bits of arg contain the desired protocol from ISDN_PTYPE */ -/* definitions. The upper 24 bits represent the protocol specific cmd/stat.*/ -/* Any additional data is protocol and command specific. */ -/* This mechanism also applies to the statcallb callback STAT_PROT. */ -/* */ -/* This suggested extension permits an easy expansion of protocol specific */ -/* handling. Extensions may be added at any time without changing the HL */ -/* driver code and not getting conflicts without certifications. */ -/* The well known CAPI 2.0 interface handles such extensions in a similar */ -/* way. Perhaps a protocol specific module may be added and separately */ -/* loaded and linked to the basic isdn module for handling. */ -/***************************************************************************/ - -/*****************/ -/* DSS1 commands */ -/*****************/ -#define DSS1_CMD_INVOKE ((0x00 << 8) | ISDN_PTYPE_EURO) /* invoke a supplementary service */ -#define DSS1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_EURO) /* abort a invoke cmd */ - -/*******************************/ -/* DSS1 Status callback values */ -/*******************************/ -#define DSS1_STAT_INVOKE_RES ((0x80 << 8) | ISDN_PTYPE_EURO) /* Result for invocation */ -#define DSS1_STAT_INVOKE_ERR ((0x81 << 8) | ISDN_PTYPE_EURO) /* Error Return for invocation */ -#define DSS1_STAT_INVOKE_BRD ((0x82 << 8) | ISDN_PTYPE_EURO) /* Deliver invoke broadcast info */ - - -/*********************************************************************/ -/* structures for DSS1 commands and callback */ -/* */ -/* An action is invoked by sending a DSS1_CMD_INVOKE. The ll_id, proc*/ -/* timeout, datalen and data fields must be set before calling. */ -/* */ -/* The return value is a positive hl_id value also delivered in the */ -/* hl_id field. A value of zero signals no more left hl_id capacitys.*/ -/* A negative return value signals errors in LL. So if the return */ -/* value is <= 0 no action in LL will be taken -> request ignored */ -/* */ -/* The timeout field must be filled with a positive value specifying */ -/* the amount of time the INVOKED process waits for a reaction from */ -/* the network. */ -/* If a response (either error or result) is received during this */ -/* intervall, a reporting callback is initiated and the process will */ -/* be deleted, the hl identifier will be freed. */ -/* If no response is received during the specified intervall, a error*/ -/* callback is initiated with timeout set to -1 and a datalen set */ -/* to 0. */ -/* If timeout is set to a value <= 0 during INVOCATION the process is*/ -/* immediately deleted after sending the data. No callback occurs ! */ -/* */ -/* A currently waiting process may be aborted with INVOKE_ABORT. No */ -/* callback will occur when a process has been aborted. */ -/* */ -/* Broadcast invoke frames from the network are reported via the */ -/* STAT_INVOKE_BRD callback. The ll_id is set to 0, the other fields */ -/* are supplied by the network and not by the HL. */ -/*********************************************************************/ - -/*****************/ -/* NI1 commands */ -/*****************/ -#define NI1_CMD_INVOKE ((0x00 << 8) | ISDN_PTYPE_NI1) /* invoke a supplementary service */ -#define NI1_CMD_INVOKE_ABORT ((0x01 << 8) | ISDN_PTYPE_NI1) /* abort a invoke cmd */ - -/*******************************/ -/* NI1 Status callback values */ -/*******************************/ -#define NI1_STAT_INVOKE_RES ((0x80 << 8) | ISDN_PTYPE_NI1) /* Result for invocation */ -#define NI1_STAT_INVOKE_ERR ((0x81 << 8) | ISDN_PTYPE_NI1) /* Error Return for invocation */ -#define NI1_STAT_INVOKE_BRD ((0x82 << 8) | ISDN_PTYPE_NI1) /* Deliver invoke broadcast info */ - -typedef struct - { ulong ll_id; /* ID supplied by LL when executing */ - /* a command and returned by HL for */ - /* INVOKE_RES and INVOKE_ERR */ - int hl_id; /* ID supplied by HL when called */ - /* for executing a cmd and delivered */ - /* for results and errors */ - /* must be supplied by LL when aborting*/ - int proc; /* invoke procedure used by CMD_INVOKE */ - /* returned by callback and broadcast */ - int timeout; /* timeout for INVOKE CMD in ms */ - /* -1 in stat callback when timed out */ - /* error value when error callback */ - int datalen; /* length of cmd or stat data */ - u_char *data;/* pointer to data delivered or send */ - } isdn_cmd_stat; - -/* - * Commands from linklevel to lowlevel - * - */ -#define ISDN_CMD_IOCTL 0 /* Perform ioctl */ -#define ISDN_CMD_DIAL 1 /* Dial out */ -#define ISDN_CMD_ACCEPTD 2 /* Accept an incoming call on D-Chan. */ -#define ISDN_CMD_ACCEPTB 3 /* Request B-Channel connect. */ -#define ISDN_CMD_HANGUP 4 /* Hangup */ -#define ISDN_CMD_CLREAZ 5 /* Clear EAZ(s) of channel */ -#define ISDN_CMD_SETEAZ 6 /* Set EAZ(s) of channel */ -#define ISDN_CMD_GETEAZ 7 /* Get EAZ(s) of channel */ -#define ISDN_CMD_SETSIL 8 /* Set Service-Indicator-List of channel */ -#define ISDN_CMD_GETSIL 9 /* Get Service-Indicator-List of channel */ -#define ISDN_CMD_SETL2 10 /* Set B-Chan. Layer2-Parameter */ -#define ISDN_CMD_GETL2 11 /* Get B-Chan. Layer2-Parameter */ -#define ISDN_CMD_SETL3 12 /* Set B-Chan. Layer3-Parameter */ -#define ISDN_CMD_GETL3 13 /* Get B-Chan. Layer3-Parameter */ -// #define ISDN_CMD_LOCK 14 /* Signal usage by upper levels */ -// #define ISDN_CMD_UNLOCK 15 /* Release usage-lock */ -#define ISDN_CMD_SUSPEND 16 /* Suspend connection */ -#define ISDN_CMD_RESUME 17 /* Resume connection */ -#define ISDN_CMD_PROCEED 18 /* Proceed with call establishment */ -#define ISDN_CMD_ALERT 19 /* Alert after Proceeding */ -#define ISDN_CMD_REDIR 20 /* Redir a incoming call */ -#define ISDN_CMD_PROT_IO 21 /* Protocol specific commands */ -#define CAPI_PUT_MESSAGE 22 /* CAPI message send down or up */ -#define ISDN_CMD_FAXCMD 23 /* FAX commands to HL-driver */ -#define ISDN_CMD_AUDIO 24 /* DSP, DTMF, ... settings */ - -/* - * Status-Values delivered from lowlevel to linklevel via - * statcallb(). - * - */ -#define ISDN_STAT_STAVAIL 256 /* Raw status-data available */ -#define ISDN_STAT_ICALL 257 /* Incoming call detected */ -#define ISDN_STAT_RUN 258 /* Signal protocol-code is running */ -#define ISDN_STAT_STOP 259 /* Signal halt of protocol-code */ -#define ISDN_STAT_DCONN 260 /* Signal D-Channel connect */ -#define ISDN_STAT_BCONN 261 /* Signal B-Channel connect */ -#define ISDN_STAT_DHUP 262 /* Signal D-Channel disconnect */ -#define ISDN_STAT_BHUP 263 /* Signal B-Channel disconnect */ -#define ISDN_STAT_CINF 264 /* Charge-Info */ -#define ISDN_STAT_LOAD 265 /* Signal new lowlevel-driver is loaded */ -#define ISDN_STAT_UNLOAD 266 /* Signal unload of lowlevel-driver */ -#define ISDN_STAT_BSENT 267 /* Signal packet sent */ -#define ISDN_STAT_NODCH 268 /* Signal no D-Channel */ -#define ISDN_STAT_ADDCH 269 /* Add more Channels */ -#define ISDN_STAT_CAUSE 270 /* Cause-Message */ -#define ISDN_STAT_ICALLW 271 /* Incoming call without B-chan waiting */ -#define ISDN_STAT_REDIR 272 /* Redir result */ -#define ISDN_STAT_PROT 273 /* protocol IO specific callback */ -#define ISDN_STAT_DISPLAY 274 /* deliver a received display message */ -#define ISDN_STAT_L1ERR 275 /* Signal Layer-1 Error */ -#define ISDN_STAT_FAXIND 276 /* FAX indications from HL-driver */ -#define ISDN_STAT_AUDIO 277 /* DTMF, DSP indications */ -#define ISDN_STAT_DISCH 278 /* Disable/Enable channel usage */ - -/* - * Audio commands - */ -#define ISDN_AUDIO_SETDD 0 /* Set DTMF detection */ -#define ISDN_AUDIO_DTMF 1 /* Rx/Tx DTMF */ - -/* - * Values for errcode field - */ -#define ISDN_STAT_L1ERR_SEND 1 -#define ISDN_STAT_L1ERR_RECV 2 - -/* - * Values for feature-field of interface-struct. - */ -/* Layer 2 */ -#define ISDN_FEATURE_L2_X75I (0x0001 << ISDN_PROTO_L2_X75I) -#define ISDN_FEATURE_L2_X75UI (0x0001 << ISDN_PROTO_L2_X75UI) -#define ISDN_FEATURE_L2_X75BUI (0x0001 << ISDN_PROTO_L2_X75BUI) -#define ISDN_FEATURE_L2_HDLC (0x0001 << ISDN_PROTO_L2_HDLC) -#define ISDN_FEATURE_L2_TRANS (0x0001 << ISDN_PROTO_L2_TRANS) -#define ISDN_FEATURE_L2_X25DTE (0x0001 << ISDN_PROTO_L2_X25DTE) -#define ISDN_FEATURE_L2_X25DCE (0x0001 << ISDN_PROTO_L2_X25DCE) -#define ISDN_FEATURE_L2_V11096 (0x0001 << ISDN_PROTO_L2_V11096) -#define ISDN_FEATURE_L2_V11019 (0x0001 << ISDN_PROTO_L2_V11019) -#define ISDN_FEATURE_L2_V11038 (0x0001 << ISDN_PROTO_L2_V11038) -#define ISDN_FEATURE_L2_MODEM (0x0001 << ISDN_PROTO_L2_MODEM) -#define ISDN_FEATURE_L2_FAX (0x0001 << ISDN_PROTO_L2_FAX) -#define ISDN_FEATURE_L2_HDLC_56K (0x0001 << ISDN_PROTO_L2_HDLC_56K) - -#define ISDN_FEATURE_L2_MASK (0x0FFFF) /* Max. 16 protocols */ -#define ISDN_FEATURE_L2_SHIFT (0) - -/* Layer 3 */ -#define ISDN_FEATURE_L3_TRANS (0x10000 << ISDN_PROTO_L3_TRANS) -#define ISDN_FEATURE_L3_TRANSDSP (0x10000 << ISDN_PROTO_L3_TRANSDSP) -#define ISDN_FEATURE_L3_FCLASS2 (0x10000 << ISDN_PROTO_L3_FCLASS2) -#define ISDN_FEATURE_L3_FCLASS1 (0x10000 << ISDN_PROTO_L3_FCLASS1) - -#define ISDN_FEATURE_L3_MASK (0x0FF0000) /* Max. 8 Protocols */ -#define ISDN_FEATURE_L3_SHIFT (16) - -/* Signaling */ -#define ISDN_FEATURE_P_UNKNOWN (0x1000000 << ISDN_PTYPE_UNKNOWN) -#define ISDN_FEATURE_P_1TR6 (0x1000000 << ISDN_PTYPE_1TR6) -#define ISDN_FEATURE_P_EURO (0x1000000 << ISDN_PTYPE_EURO) -#define ISDN_FEATURE_P_NI1 (0x1000000 << ISDN_PTYPE_NI1) - -#define ISDN_FEATURE_P_MASK (0x0FF000000) /* Max. 8 Protocols */ -#define ISDN_FEATURE_P_SHIFT (24) - -typedef struct setup_parm { - unsigned char phone[32]; /* Remote Phone-Number */ - unsigned char eazmsn[32]; /* Local EAZ or MSN */ - unsigned char si1; /* Service Indicator 1 */ - unsigned char si2; /* Service Indicator 2 */ - unsigned char plan; /* Numbering plan */ - unsigned char screen; /* Screening info */ -} setup_parm; - - -#ifdef CONFIG_ISDN_TTY_FAX -/* T.30 Fax G3 */ - -#define FAXIDLEN 21 - -typedef struct T30_s { - /* session parameters */ - __u8 resolution; - __u8 rate; - __u8 width; - __u8 length; - __u8 compression; - __u8 ecm; - __u8 binary; - __u8 scantime; - __u8 id[FAXIDLEN]; - /* additional parameters */ - __u8 phase; - __u8 direction; - __u8 code; - __u8 badlin; - __u8 badmul; - __u8 bor; - __u8 fet; - __u8 pollid[FAXIDLEN]; - __u8 cq; - __u8 cr; - __u8 ctcrty; - __u8 minsp; - __u8 phcto; - __u8 rel; - __u8 nbc; - /* remote station parameters */ - __u8 r_resolution; - __u8 r_rate; - __u8 r_width; - __u8 r_length; - __u8 r_compression; - __u8 r_ecm; - __u8 r_binary; - __u8 r_scantime; - __u8 r_id[FAXIDLEN]; - __u8 r_code; -} __packed T30_s; - -#define ISDN_TTY_FAX_CONN_IN 0 -#define ISDN_TTY_FAX_CONN_OUT 1 - -#define ISDN_TTY_FAX_FCON 0 -#define ISDN_TTY_FAX_DIS 1 -#define ISDN_TTY_FAX_FTT 2 -#define ISDN_TTY_FAX_MCF 3 -#define ISDN_TTY_FAX_DCS 4 -#define ISDN_TTY_FAX_TRAIN_OK 5 -#define ISDN_TTY_FAX_EOP 6 -#define ISDN_TTY_FAX_EOM 7 -#define ISDN_TTY_FAX_MPS 8 -#define ISDN_TTY_FAX_DTC 9 -#define ISDN_TTY_FAX_RID 10 -#define ISDN_TTY_FAX_HNG 11 -#define ISDN_TTY_FAX_DT 12 -#define ISDN_TTY_FAX_FCON_I 13 -#define ISDN_TTY_FAX_DR 14 -#define ISDN_TTY_FAX_ET 15 -#define ISDN_TTY_FAX_CFR 16 -#define ISDN_TTY_FAX_PTS 17 -#define ISDN_TTY_FAX_SENT 18 - -#define ISDN_FAX_PHASE_IDLE 0 -#define ISDN_FAX_PHASE_A 1 -#define ISDN_FAX_PHASE_B 2 -#define ISDN_FAX_PHASE_C 3 -#define ISDN_FAX_PHASE_D 4 -#define ISDN_FAX_PHASE_E 5 - -#endif /* TTY_FAX */ - -#define ISDN_FAX_CLASS1_FAE 0 -#define ISDN_FAX_CLASS1_FTS 1 -#define ISDN_FAX_CLASS1_FRS 2 -#define ISDN_FAX_CLASS1_FTM 3 -#define ISDN_FAX_CLASS1_FRM 4 -#define ISDN_FAX_CLASS1_FTH 5 -#define ISDN_FAX_CLASS1_FRH 6 -#define ISDN_FAX_CLASS1_CTRL 7 - -#define ISDN_FAX_CLASS1_OK 0 -#define ISDN_FAX_CLASS1_CONNECT 1 -#define ISDN_FAX_CLASS1_NOCARR 2 -#define ISDN_FAX_CLASS1_ERROR 3 -#define ISDN_FAX_CLASS1_FCERROR 4 -#define ISDN_FAX_CLASS1_QUERY 5 - -typedef struct { - __u8 cmd; - __u8 subcmd; - __u8 para[50]; -} aux_s; - -#define AT_COMMAND 0 -#define AT_EQ_VALUE 1 -#define AT_QUERY 2 -#define AT_EQ_QUERY 3 - -/* CAPI structs */ - -/* this is compatible to the old union size */ -#define MAX_CAPI_PARA_LEN 50 - -typedef struct { - /* Header */ - __u16 Length; - __u16 ApplId; - __u8 Command; - __u8 Subcommand; - __u16 Messagenumber; - - /* Parameter */ - union { - __u32 Controller; - __u32 PLCI; - __u32 NCCI; - } adr; - __u8 para[MAX_CAPI_PARA_LEN]; -} capi_msg; - -/* - * Structure for exchanging above infos - * - */ -typedef struct { - int driver; /* Lowlevel-Driver-ID */ - int command; /* Command or Status (see above) */ - ulong arg; /* Additional Data */ - union { - ulong errcode; /* Type of error with STAT_L1ERR */ - int length; /* Amount of bytes sent with STAT_BSENT */ - u_char num[50]; /* Additional Data */ - setup_parm setup;/* For SETUP msg */ - capi_msg cmsg; /* For CAPI like messages */ - char display[85];/* display message data */ - isdn_cmd_stat isdn_io; /* ISDN IO-parameter/result */ - aux_s aux; /* for modem commands/indications */ -#ifdef CONFIG_ISDN_TTY_FAX - T30_s *fax; /* Pointer to ttys fax struct */ -#endif - ulong userdata; /* User Data */ - } parm; -} isdn_ctrl; - -#define dss1_io isdn_io -#define ni1_io isdn_io - -/* - * The interface-struct itself (initialized at load-time of lowlevel-driver) - * - * See Documentation/isdn/INTERFACE for a description, how the communication - * between the ISDN subsystem and its drivers is done. - * - */ -typedef struct { - struct module *owner; - - /* Number of channels supported by this driver - */ - int channels; - - /* - * Maximum Size of transmit/receive-buffer this driver supports. - */ - int maxbufsize; - - /* Feature-Flags for this driver. - * See defines ISDN_FEATURE_... for Values - */ - unsigned long features; - - /* - * Needed for calculating - * dev->hard_header_len = linklayer header + hl_hdrlen; - * Drivers, not supporting sk_buff's should set this to 0. - */ - unsigned short hl_hdrlen; - - /* - * Receive-Callback using sk_buff's - * Parameters: - * int Driver-ID - * int local channel-number (0 ...) - * struct sk_buff *skb received Data - */ - void (*rcvcallb_skb)(int, int, struct sk_buff *); - - /* Status-Callback - * Parameters: - * isdn_ctrl* - * driver = Driver ID. - * command = One of above ISDN_STAT_... constants. - * arg = depending on status-type. - * num = depending on status-type. - */ - int (*statcallb)(isdn_ctrl*); - - /* Send command - * Parameters: - * isdn_ctrl* - * driver = Driver ID. - * command = One of above ISDN_CMD_... constants. - * arg = depending on command. - * num = depending on command. - */ - int (*command)(isdn_ctrl*); - - /* - * Send data using sk_buff's - * Parameters: - * int driverId - * int local channel-number (0...) - * int Flag: Need ACK for this packet. - * struct sk_buff *skb Data to send - */ - int (*writebuf_skb) (int, int, int, struct sk_buff *); - - /* Send raw D-Channel-Commands - * Parameters: - * u_char pointer data - * int length of data - * int driverId - * int local channel-number (0 ...) - */ - int (*writecmd)(const u_char __user *, int, int, int); - - /* Read raw Status replies - * u_char pointer data (volatile) - * int length of buffer - * int driverId - * int local channel-number (0 ...) - */ - int (*readstat)(u_char __user *, int, int, int); - - char id[20]; -} isdn_if; - -/* - * Function which must be called by lowlevel-driver at loadtime with - * the following fields of above struct set: - * - * channels Number of channels that will be supported. - * hl_hdrlen Space to preserve in sk_buff's when sending. Drivers, not - * supporting sk_buff's should set this to 0. - * command Address of Command-Handler. - * features Bitwise coded Features of this driver. (use ISDN_FEATURE_...) - * writebuf_skb Address of Skbuff-Send-Handler. - * writecmd " " D-Channel " which accepts raw D-Ch-Commands. - * readstat " " D-Channel " which delivers raw Status-Data. - * - * The linklevel-driver fills the following fields: - * - * channels Driver-ID assigned to this driver. (Must be used on all - * subsequent callbacks. - * rcvcallb_skb Address of handler for received Skbuff's. - * statcallb " " " for status-changes. - * - */ -extern int register_isdn(isdn_if*); -#include - -#endif /* __ISDNIF_H__ */ diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h deleted file mode 100644 index f6358558f9f5..000000000000 --- a/include/linux/wanrouter.h +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * wanrouter.h Legacy declarations kept around until X25 is removed - */ - -#ifndef _ROUTER_H -#define _ROUTER_H - -#include - -#endif /* _ROUTER_H */ diff --git a/include/uapi/linux/isdn.h b/include/uapi/linux/isdn.h deleted file mode 100644 index f371fd52ed75..000000000000 --- a/include/uapi/linux/isdn.h +++ /dev/null @@ -1,144 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* $Id: isdn.h,v 1.125.2.3 2004/02/10 01:07:14 keil Exp $ - * - * Main header for the Linux ISDN subsystem (linklevel). - * - * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de) - * Copyright 1995,96 by Thinking Objects Software GmbH Wuerzburg - * Copyright 1995,96 by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#ifndef _UAPI__ISDN_H__ -#define _UAPI__ISDN_H__ - -#include -#include - -#define ISDN_MAX_DRIVERS 32 -#define ISDN_MAX_CHANNELS 64 - -/* New ioctl-codes */ -#define IIOCNETAIF _IO('I',1) -#define IIOCNETDIF _IO('I',2) -#define IIOCNETSCF _IO('I',3) -#define IIOCNETGCF _IO('I',4) -#define IIOCNETANM _IO('I',5) -#define IIOCNETDNM _IO('I',6) -#define IIOCNETGNM _IO('I',7) -#define IIOCGETSET _IO('I',8) /* no longer supported */ -#define IIOCSETSET _IO('I',9) /* no longer supported */ -#define IIOCSETVER _IO('I',10) -#define IIOCNETHUP _IO('I',11) -#define IIOCSETGST _IO('I',12) -#define IIOCSETBRJ _IO('I',13) -#define IIOCSIGPRF _IO('I',14) -#define IIOCGETPRF _IO('I',15) -#define IIOCSETPRF _IO('I',16) -#define IIOCGETMAP _IO('I',17) -#define IIOCSETMAP _IO('I',18) -#define IIOCNETASL _IO('I',19) -#define IIOCNETDIL _IO('I',20) -#define IIOCGETCPS _IO('I',21) -#define IIOCGETDVR _IO('I',22) -#define IIOCNETLCR _IO('I',23) /* dwabc ioctl for LCR from isdnlog */ -#define IIOCNETDWRSET _IO('I',24) /* dwabc ioctl to reset abc-values to default on a net-interface */ - -#define IIOCNETALN _IO('I',32) -#define IIOCNETDLN _IO('I',33) - -#define IIOCNETGPN _IO('I',34) - -#define IIOCDBGVAR _IO('I',127) - -#define IIOCDRVCTL _IO('I',128) - -/* cisco hdlck device private ioctls */ -#define SIOCGKEEPPERIOD (SIOCDEVPRIVATE + 0) -#define SIOCSKEEPPERIOD (SIOCDEVPRIVATE + 1) -#define SIOCGDEBSERINT (SIOCDEVPRIVATE + 2) -#define SIOCSDEBSERINT (SIOCDEVPRIVATE + 3) - -/* Packet encapsulations for net-interfaces */ -#define ISDN_NET_ENCAP_ETHER 0 -#define ISDN_NET_ENCAP_RAWIP 1 -#define ISDN_NET_ENCAP_IPTYP 2 -#define ISDN_NET_ENCAP_CISCOHDLC 3 /* Without SLARP and keepalive */ -#define ISDN_NET_ENCAP_SYNCPPP 4 -#define ISDN_NET_ENCAP_UIHDLC 5 -#define ISDN_NET_ENCAP_CISCOHDLCK 6 /* With SLARP and keepalive */ -#define ISDN_NET_ENCAP_X25IFACE 7 /* Documentation/networking/x25-iface.txt */ -#define ISDN_NET_ENCAP_MAX_ENCAP ISDN_NET_ENCAP_X25IFACE - -/* Facility which currently uses an ISDN-channel */ -#define ISDN_USAGE_NONE 0 -#define ISDN_USAGE_RAW 1 -#define ISDN_USAGE_MODEM 2 -#define ISDN_USAGE_NET 3 -#define ISDN_USAGE_VOICE 4 -#define ISDN_USAGE_FAX 5 -#define ISDN_USAGE_MASK 7 /* Mask to get plain usage */ -#define ISDN_USAGE_DISABLED 32 /* This bit is set, if channel is disabled */ -#define ISDN_USAGE_EXCLUSIVE 64 /* This bit is set, if channel is exclusive */ -#define ISDN_USAGE_OUTGOING 128 /* This bit is set, if channel is outgoing */ - -#define ISDN_MODEM_NUMREG 24 /* Number of Modem-Registers */ -#define ISDN_LMSNLEN 255 /* Length of tty's Listen-MSN string */ -#define ISDN_CMSGLEN 50 /* Length of CONNECT-Message to add for Modem */ - -#define ISDN_MSNLEN 32 -#define NET_DV 0x06 /* Data version for isdn_net_ioctl_cfg */ -#define TTY_DV 0x06 /* Data version for iprofd etc. */ - -#define INF_DV 0x01 /* Data version for /dev/isdninfo */ - -typedef struct { - char drvid[25]; - unsigned long arg; -} isdn_ioctl_struct; - -typedef struct { - char name[10]; - char phone[ISDN_MSNLEN]; - int outgoing; -} isdn_net_ioctl_phone; - -typedef struct { - char name[10]; /* Name of interface */ - char master[10]; /* Name of Master for Bundling */ - char slave[10]; /* Name of Slave for Bundling */ - char eaz[256]; /* EAZ/MSN */ - char drvid[25]; /* DriverId for Bindings */ - int onhtime; /* Hangup-Timeout */ - int charge; /* Charge-Units */ - int l2_proto; /* Layer-2 protocol */ - int l3_proto; /* Layer-3 protocol */ - int p_encap; /* Encapsulation */ - int exclusive; /* Channel, if bound exclusive */ - int dialmax; /* Dial Retry-Counter */ - int slavedelay; /* Delay until slave starts up */ - int cbdelay; /* Delay before Callback */ - int chargehup; /* Flag: Charge-Hangup */ - int ihup; /* Flag: Hangup-Timeout on incoming line */ - int secure; /* Flag: Secure */ - int callback; /* Flag: Callback */ - int cbhup; /* Flag: Reject Call before Callback */ - int pppbind; /* ippp device for bindings */ - int chargeint; /* Use fixed charge interval length */ - int triggercps; /* BogoCPS needed for triggering slave */ - int dialtimeout; /* Dial-Timeout */ - int dialwait; /* Time to wait after failed dial */ - int dialmode; /* Flag: off / on / auto */ -} isdn_net_ioctl_cfg; - -#define ISDN_NET_DIALMODE_MASK 0xC0 /* bits for status */ -#define ISDN_NET_DM_OFF 0x00 /* this interface is stopped */ -#define ISDN_NET_DM_MANUAL 0x40 /* this interface is on (manual) */ -#define ISDN_NET_DM_AUTO 0x80 /* this interface is autodial */ -#define ISDN_NET_DIALMODE(x) ((&(x))->flags & ISDN_NET_DIALMODE_MASK) - - -#endif /* _UAPI__ISDN_H__ */ diff --git a/include/uapi/linux/isdn_divertif.h b/include/uapi/linux/isdn_divertif.h deleted file mode 100644 index 0a17bb1bcb1b..000000000000 --- a/include/uapi/linux/isdn_divertif.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* $Id: isdn_divertif.h,v 1.4.6.1 2001/09/23 22:25:05 kai Exp $ - * - * Header for the diversion supplementary interface for i4l. - * - * Author Werner Cornelius (werner@titro.de) - * Copyright by Werner Cornelius (werner@titro.de) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#ifndef _UAPI_LINUX_ISDN_DIVERTIF_H -#define _UAPI_LINUX_ISDN_DIVERTIF_H - -/***********************************************************/ -/* magic value is also used to control version information */ -/***********************************************************/ -#define DIVERT_IF_MAGIC 0x25873401 -#define DIVERT_CMD_REG 0x00 /* register command */ -#define DIVERT_CMD_REL 0x01 /* release command */ -#define DIVERT_NO_ERR 0x00 /* return value no error */ -#define DIVERT_CMD_ERR 0x01 /* invalid cmd */ -#define DIVERT_VER_ERR 0x02 /* magic/version invalid */ -#define DIVERT_REG_ERR 0x03 /* module already registered */ -#define DIVERT_REL_ERR 0x04 /* module not registered */ -#define DIVERT_REG_NAME isdn_register_divert - - -#endif /* _UAPI_LINUX_ISDN_DIVERTIF_H */ diff --git a/include/uapi/linux/isdn_ppp.h b/include/uapi/linux/isdn_ppp.h deleted file mode 100644 index 0bdc4efaacb2..000000000000 --- a/include/uapi/linux/isdn_ppp.h +++ /dev/null @@ -1,68 +0,0 @@ -/* SPDX-License-Identifier: GPL-1.0+ WITH Linux-syscall-note */ -/* Linux ISDN subsystem, sync PPP, interface to ipppd - * - * Copyright 1994-1999 by Fritz Elfert (fritz@isdn4linux.de) - * Copyright 1995,96 Thinking Objects Software GmbH Wuerzburg - * Copyright 1995,96 by Michael Hipp (Michael.Hipp@student.uni-tuebingen.de) - * Copyright 2000-2002 by Kai Germaschewski (kai@germaschewski.name) - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#ifndef _UAPI_LINUX_ISDN_PPP_H -#define _UAPI_LINUX_ISDN_PPP_H - -#define CALLTYPE_INCOMING 0x1 -#define CALLTYPE_OUTGOING 0x2 -#define CALLTYPE_CALLBACK 0x4 - -#define IPPP_VERSION "2.2.0" - -struct pppcallinfo -{ - int calltype; - unsigned char local_num[64]; - unsigned char remote_num[64]; - int charge_units; -}; - -#define PPPIOCGCALLINFO _IOWR('t',128,struct pppcallinfo) -#define PPPIOCBUNDLE _IOW('t',129,int) -#define PPPIOCGMPFLAGS _IOR('t',130,int) -#define PPPIOCSMPFLAGS _IOW('t',131,int) -#define PPPIOCSMPMTU _IOW('t',132,int) -#define PPPIOCSMPMRU _IOW('t',133,int) -#define PPPIOCGCOMPRESSORS _IOR('t',134,unsigned long [8]) -#define PPPIOCSCOMPRESSOR _IOW('t',135,int) -#define PPPIOCGIFNAME _IOR('t',136, char [IFNAMSIZ] ) - - -#define SC_MP_PROT 0x00000200 -#define SC_REJ_MP_PROT 0x00000400 -#define SC_OUT_SHORT_SEQ 0x00000800 -#define SC_IN_SHORT_SEQ 0x00004000 - -#define SC_DECOMP_ON 0x01 -#define SC_COMP_ON 0x02 -#define SC_DECOMP_DISCARD 0x04 -#define SC_COMP_DISCARD 0x08 -#define SC_LINK_DECOMP_ON 0x10 -#define SC_LINK_COMP_ON 0x20 -#define SC_LINK_DECOMP_DISCARD 0x40 -#define SC_LINK_COMP_DISCARD 0x80 - -#define ISDN_PPP_COMP_MAX_OPTIONS 16 - -#define IPPP_COMP_FLAG_XMIT 0x1 -#define IPPP_COMP_FLAG_LINK 0x2 - -struct isdn_ppp_comp_data { - int num; - unsigned char options[ISDN_PPP_COMP_MAX_OPTIONS]; - int optlen; - int flags; -}; - -#endif /* _UAPI_LINUX_ISDN_PPP_H */ diff --git a/include/uapi/linux/isdnif.h b/include/uapi/linux/isdnif.h deleted file mode 100644 index 611a69196738..000000000000 --- a/include/uapi/linux/isdnif.h +++ /dev/null @@ -1,57 +0,0 @@ -/* SPDX-License-Identifier: GPL-1.0+ WITH Linux-syscall-note */ -/* $Id: isdnif.h,v 1.43.2.2 2004/01/12 23:08:35 keil Exp $ - * - * Linux ISDN subsystem - * Definition of the interface between the subsystem and its low-level drivers. - * - * Copyright 1994,95,96 by Fritz Elfert (fritz@isdn4linux.de) - * Copyright 1995,96 Thinking Objects Software GmbH Wuerzburg - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - */ - -#ifndef _UAPI__ISDNIF_H__ -#define _UAPI__ISDNIF_H__ - - -/* - * Values for general protocol-selection - */ -#define ISDN_PTYPE_UNKNOWN 0 /* Protocol undefined */ -#define ISDN_PTYPE_1TR6 1 /* german 1TR6-protocol */ -#define ISDN_PTYPE_EURO 2 /* EDSS1-protocol */ -#define ISDN_PTYPE_LEASED 3 /* for leased lines */ -#define ISDN_PTYPE_NI1 4 /* US NI-1 protocol */ -#define ISDN_PTYPE_MAX 7 /* Max. 8 Protocols */ - -/* - * Values for Layer-2-protocol-selection - */ -#define ISDN_PROTO_L2_X75I 0 /* X75/LAPB with I-Frames */ -#define ISDN_PROTO_L2_X75UI 1 /* X75/LAPB with UI-Frames */ -#define ISDN_PROTO_L2_X75BUI 2 /* X75/LAPB with UI-Frames */ -#define ISDN_PROTO_L2_HDLC 3 /* HDLC */ -#define ISDN_PROTO_L2_TRANS 4 /* Transparent (Voice) */ -#define ISDN_PROTO_L2_X25DTE 5 /* X25/LAPB DTE mode */ -#define ISDN_PROTO_L2_X25DCE 6 /* X25/LAPB DCE mode */ -#define ISDN_PROTO_L2_V11096 7 /* V.110 bitrate adaption 9600 Baud */ -#define ISDN_PROTO_L2_V11019 8 /* V.110 bitrate adaption 19200 Baud */ -#define ISDN_PROTO_L2_V11038 9 /* V.110 bitrate adaption 38400 Baud */ -#define ISDN_PROTO_L2_MODEM 10 /* Analog Modem on Board */ -#define ISDN_PROTO_L2_FAX 11 /* Fax Group 2/3 */ -#define ISDN_PROTO_L2_HDLC_56K 12 /* HDLC 56k */ -#define ISDN_PROTO_L2_MAX 15 /* Max. 16 Protocols */ - -/* - * Values for Layer-3-protocol-selection - */ -#define ISDN_PROTO_L3_TRANS 0 /* Transparent */ -#define ISDN_PROTO_L3_TRANSDSP 1 /* Transparent with DSP */ -#define ISDN_PROTO_L3_FCLASS2 2 /* Fax Group 2/3 CLASS 2 */ -#define ISDN_PROTO_L3_FCLASS1 3 /* Fax Group 2/3 CLASS 1 */ -#define ISDN_PROTO_L3_MAX 7 /* Max. 8 Protocols */ - - -#endif /* _UAPI__ISDNIF_H__ */ diff --git a/include/uapi/linux/wanrouter.h b/include/uapi/linux/wanrouter.h deleted file mode 100644 index 2f1216d00caa..000000000000 --- a/include/uapi/linux/wanrouter.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -/* - * wanrouter.h Legacy declarations kept around until X25 is removed - */ - -#ifndef _UAPI_ROUTER_H -#define _UAPI_ROUTER_H - -/* 'state' defines */ -enum wan_states -{ - WAN_UNCONFIGURED, /* link/channel is not configured */ - WAN_DISCONNECTED, /* link/channel is disconnected */ - WAN_CONNECTING, /* connection is in progress */ - WAN_CONNECTED /* link/channel is operational */ -}; - -#endif /* _UAPI_ROUTER_H */