From 9c4f1506b47708d43f0eda157026e85a5a3e7ac6 Mon Sep 17 00:00:00 2001 From: Ondrej Jirman Date: Sat, 22 Feb 2020 23:31:53 +0100 Subject: [PATCH] ARM: dts: sun8i-a83t-tbs-a711: Fix USB OTG mode detection commit b642d4825441bf30c72b72deb739bd2d5f53af08 upstream. USB-ID signal has a pullup on the schematic, but in reality it's not pulled up, so add a GPIO pullup. And we also need a usb0_vbus_power-supply for VBUS detection. This fixes OTG mode detection and charging issues on TBS A711 tablet. The issues came from ID pin reading 0, causing host mode to be enabled, when it should not be, leading to DRVVBUS being enabled, which disabled the charger. Fixes: f2f221c7810b824e ("ARM: dts: sun8i: a711: Enable USB OTG") Signed-off-by: Ondrej Jirman Signed-off-by: Maxime Ripard Signed-off-by: Greg Kroah-Hartman --- arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 3bec3e0a81b2..397140454132 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -482,7 +482,8 @@ }; &usbphy { - usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ + usb0_id_det-gpios = <&pio 7 11 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH11 */ + usb0_vbus_power-supply = <&usb_power_supply>; usb0_vbus-supply = <®_drivevbus>; usb1_vbus-supply = <®_vmain>; usb2_vbus-supply = <®_vmain>;