Merge 4.20-rc6 into tty-next

We want the TTY changes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-10 10:17:45 +01:00 · 2018-12-10 10:17:45 +01:00 · 9c96f401e9
parent 1528e40fd7 40e020c129
commit 9c96f401e9
661 changed files with 7732 additions and 3554 deletions
--- a/Documentation/ABI/testing/sysfs-class-net-dsa
+++ b/Documentation/ABI/testing/sysfs-class-net-dsa
@ -1,4 +1,4 @@
-What:		/sys/class/net/<iface>/tagging
+What:		/sys/class/net/<iface>/dsa/tagging
 Date:		August 2018
 KernelVersion:	4.20
 Contact:	netdev@vger.kernel.org
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@ -856,7 +856,8 @@
 			causing system reset or hang due to sending
 			INIT from AP to BSP.

-	disable_counter_freezing [HW]
+	perf_v4_pmi=	[X86,INTEL]
+			Format: <bool>
 			Disable Intel PMU counter freezing feature.
 			The feature only exists starting from
 			Arch Perfmon v4 (Skylake and newer).
@ -3504,6 +3505,10 @@
 			before loading.
 			See Documentation/blockdev/ramdisk.txt.

+	psi=		[KNL] Enable or disable pressure stall information
+			tracking.
+			Format: <bool>
+
 	psmouse.proto=	[HW,MOUSE] Highest PS2 mouse protocol extension to
 			probe for; one of (bare|imps|exps|lifebook|any).
 	psmouse.rate=	[HW,MOUSE] Set desired mouse report rate, in reports
@ -4194,9 +4199,13 @@

 	spectre_v2=	[X86] Control mitigation of Spectre variant 2
 			(indirect branch speculation) vulnerability.
+			The default operation protects the kernel from
+			user space attacks.

-			on   - unconditionally enable
-			off  - unconditionally disable
+			on   - unconditionally enable, implies
+			       spectre_v2_user=on
+			off  - unconditionally disable, implies
+			       spectre_v2_user=off
 			auto - kernel detects whether your CPU model is
 			       vulnerable

@ -4206,6 +4215,12 @@
 			CONFIG_RETPOLINE configuration option, and the
 			compiler with which the kernel was built.

+			Selecting 'on' will also enable the mitigation
+			against user space to user space task attacks.
+
+			Selecting 'off' will disable both the kernel and
+			the user space protections.
+
 			Specific mitigations can also be selected manually:

 			retpoline	  - replace indirect branches
@ -4215,6 +4230,48 @@
 			Not specifying this option is equivalent to
 			spectre_v2=auto.

+	spectre_v2_user=
+			[X86] Control mitigation of Spectre variant 2
+		        (indirect branch speculation) vulnerability between
+		        user space tasks
+
+			on	- Unconditionally enable mitigations. Is
+				  enforced by spectre_v2=on
+
+			off     - Unconditionally disable mitigations. Is
+				  enforced by spectre_v2=off
+
+			prctl   - Indirect branch speculation is enabled,
+				  but mitigation can be enabled via prctl
+				  per thread.  The mitigation control state
+				  is inherited on fork.
+
+			prctl,ibpb
+				- Like "prctl" above, but only STIBP is
+				  controlled per thread. IBPB is issued
+				  always when switching between different user
+				  space processes.
+
+			seccomp
+				- Same as "prctl" above, but all seccomp
+				  threads will enable the mitigation unless
+				  they explicitly opt out.
+
+			seccomp,ibpb
+				- Like "seccomp" above, but only STIBP is
+				  controlled per thread. IBPB is issued
+				  always when switching between different
+				  user space processes.
+
+			auto    - Kernel selects the mitigation depending on
+				  the available CPU features and vulnerability.
+
+			Default mitigation:
+			If CONFIG_SECCOMP=y then "seccomp", otherwise "prctl"
+
+			Not specifying this option is equivalent to
+			spectre_v2_user=auto.
+
 	spec_store_bypass_disable=
 			[HW] Control Speculative Store Bypass (SSB) Disable mitigation
 			(Speculative Store Bypass vulnerability)
--- a/Documentation/arm64/silicon-errata.txt
+++ b/Documentation/arm64/silicon-errata.txt
@ -57,6 +57,7 @@ stable kernels.
 | ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |
 | ARM            | Cortex-A55      | #1024718        | ARM64_ERRATUM_1024718       |
 | ARM            | Cortex-A76      | #1188873        | ARM64_ERRATUM_1188873       |
+| ARM            | Cortex-A76      | #1286807        | ARM64_ERRATUM_1286807       |
 | ARM            | MMU-500         | #841119,#826419 | N/A                         |
 |                |                 |                 |                             |
 | Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375        |
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@ -168,3 +168,19 @@ a shared clock is forbidden.

 Configuration of common clocks, which affect multiple consumer devices can
 be similarly specified in the clock provider node.
+
+==Protected clocks==
+
+Some platforms or firmwares may not fully expose all the clocks to the OS, such
+as in situations where those clks are used by drivers running in ARM secure
+execution levels. Such a configuration can be specified in device tree with the
+protected-clocks property in the form of a clock specifier list. This property should
+only be specified in the node that is providing the clocks being protected:
+
+   clock-controller@a000f000 {
+        compatible = "vendor,clk95;
+        reg = <0xa000f000 0x1000>
+        #clocks-cells = <1>;
+        ...
+        protected-clocks = <UART3_CLK>, <SPI5_CLK>;
+   };
--- a/Documentation/devicetree/bindings/input/input-reset.txt
+++ b/Documentation/devicetree/bindings/input/input-reset.txt
@ -12,7 +12,7 @@ The /chosen node should contain a 'linux,sysrq-reset-seq' child node to define
 a set of keys.

 Required property:
-sysrq-reset-seq: array of Linux keycodes, one keycode per cell.
+keyset: array of Linux keycodes, one keycode per cell.

 Optional property:
 timeout-ms: duration keys must be pressed together in milliseconds before
--- a/Documentation/devicetree/bindings/media/rockchip-vpu.txt
+++ b/Documentation/devicetree/bindings/media/rockchip-vpu.txt
@ -1,29 +0,0 @@
-device-tree bindings for rockchip VPU codec
-
-Rockchip (Video Processing Unit) present in various Rockchip platforms,
-such as RK3288 and RK3399.
-
-Required properties:
- compatible: value should be one of the following
-		"rockchip,rk3288-vpu";
-		"rockchip,rk3399-vpu";
- interrupts: encoding and decoding interrupt specifiers
- interrupt-names: should be "vepu" and "vdpu"
- clocks: phandle to VPU aclk, hclk clocks
- clock-names: should be "aclk" and "hclk"
- power-domains: phandle to power domain node
- iommus: phandle to a iommu node
-
-Example:
-SoC-specific DT entry:
-	vpu: video-codec@ff9a0000 {
-		compatible = "rockchip,rk3288-vpu";
-		reg = <0x0 0xff9a0000 0x0 0x800>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "vepu", "vdpu";
-		clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
-		clock-names = "aclk", "hclk";
-		power-domains = <&power RK3288_PD_VIDEO>;
-		iommus = <&vpu_mmu>;
-	};
--- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
+++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
@ -40,24 +40,36 @@ Required properties:
 		"ref" for 19.2 MHz ref clk,
 		"com_aux" for phy common block aux clock,
 		"ref_aux" for phy reference aux clock,
+
+		For "qcom,ipq8074-qmp-pcie-phy": no clocks are listed.
 		For "qcom,msm8996-qmp-pcie-phy" must contain:
 			"aux", "cfg_ahb", "ref".
 		For "qcom,msm8996-qmp-usb3-phy" must contain:
 			"aux", "cfg_ahb", "ref".
-		For "qcom,qmp-v3-usb3-phy" must contain:
+		For "qcom,sdm845-qmp-usb3-phy" must contain:
 			"aux", "cfg_ahb", "ref", "com_aux".
+		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
+			"aux", "cfg_ahb", "ref", "com_aux".
+		For "qcom,sdm845-qmp-ufs-phy" must contain:
+			"ref", "ref_aux".

 - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
 - reset-names: "phy" for reset of phy block,
 		"common" for phy common block reset,
-		"cfg" for phy's ahb cfg block reset (Optional).
-		For "qcom,msm8996-qmp-pcie-phy" must contain:
-		 "phy", "common", "cfg".
-		For "qcom,msm8996-qmp-usb3-phy" must contain
-		 "phy", "common".
+		"cfg" for phy's ahb cfg block reset.
+
 		For "qcom,ipq8074-qmp-pcie-phy" must contain:
-		 "phy", "common".
+			"phy", "common".
+		For "qcom,msm8996-qmp-pcie-phy" must contain:
+			"phy", "common", "cfg".
+		For "qcom,msm8996-qmp-usb3-phy" must contain
+			"phy", "common".
+		For "qcom,sdm845-qmp-usb3-phy" must contain:
+			"phy", "common".
+		For "qcom,sdm845-qmp-usb3-uni-phy" must contain:
+			"phy", "common".
+		For "qcom,sdm845-qmp-ufs-phy": no resets are listed.

 - vdda-phy-supply: Phandle to a regulator supply to PHY core block.
 - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block.
@ -79,9 +91,10 @@ Required properties for child node:

 - #phy-cells: must be 0

+Required properties child node of pcie and usb3 qmp phys:
 - clocks: a list of phandles and clock-specifier pairs,
 	   one for each entry in clock-names.
- - clock-names: Must contain following for pcie and usb qmp phys:
+ - clock-names: Must contain following:
 		 "pipe<lane-number>" for pipe clock specific to each lane.
 - clock-output-names: Name of the PHY clock that will be the parent for
 		       the above pipe clock.
@ -91,9 +104,11 @@ Required properties for child node:
 			(or)
 		  "pcie20_phy1_pipe_clk"

+Required properties for child node of PHYs with lane reset, AKA:
+	"qcom,msm8996-qmp-pcie-phy"
 - resets: a list of phandles and reset controller specifier pairs,
 	   one for each entry in reset-names.
- - reset-names: Must contain following for pcie qmp phys:
+ - reset-names: Must contain following:
 		 "lane<lane-number>" for reset specific to each lane.

 Example:
--- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt
+++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt
@ -5,18 +5,20 @@ UniPhier SoCs have SCSSI which supports SPI single channel.
 Required properties:
 - compatible: should be "socionext,uniphier-scssi"
 - reg: address and length of the spi master registers
- - #address-cells: must be <1>, see spi-bus.txt
- - #size-cells: must be <0>, see spi-bus.txt
- - clocks: A phandle to the clock for the device.
- - resets: A phandle to the reset control for the device.
+ - interrupts: a single interrupt specifier
+ - pinctrl-names: should be "default"
+ - pinctrl-0: pin control state for the default mode
+ - clocks: a phandle to the clock for the device
+ - resets: a phandle to the reset control for the device

 Example:

 spi0: spi@54006000 {
 	compatible = "socionext,uniphier-scssi";
 	reg = <0x54006000 0x100>;
-	#address-cells = <1>;
-	#size-cells = <0>;
+	interrupts = <0 39 4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0>;
 	clocks = <&peri_clk 11>;
 	resets = <&peri_rst 11>;
 };
--- a/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst
+++ b/Documentation/media/uapi/mediactl/media-ioc-request-alloc.rst
@ -1,4 +1,28 @@
-.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+.. This file is dual-licensed: you can use it either under the terms
+.. of the GPL or the GFDL 1.1+ license, at your option. Note that this
+.. dual licensing only applies to this file, and not this project as a
+.. whole.
+..
+.. a) This file is free software; you can redistribute it and/or
+..    modify it under the terms of the GNU General Public License as
+..    published by the Free Software Foundation; either version 2 of
+..    the License, or (at your option) any later version.
+..
+..    This file is distributed in the hope that it will be useful,
+..    but WITHOUT ANY WARRANTY; without even the implied warranty of
+..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+..    GNU General Public License for more details.
+..
+.. Or, alternatively,
+..
+.. b) Permission is granted to copy, distribute and/or modify this
+..    document under the terms of the GNU Free Documentation License,
+..    Version 1.1 or any later version published by the Free Software
+..    Foundation, with no Invariant Sections, no Front-Cover Texts
+..    and no Back-Cover Texts. A copy of the license is included at
+..    Documentation/media/uapi/fdl-appendix.rst.
+..
+.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections

 .. _media_ioc_request_alloc:

--- a/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst
+++ b/Documentation/media/uapi/mediactl/media-request-ioc-queue.rst
@ -1,4 +1,28 @@
-.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+.. This file is dual-licensed: you can use it either under the terms
+.. of the GPL or the GFDL 1.1+ license, at your option. Note that this
+.. dual licensing only applies to this file, and not this project as a
+.. whole.
+..
+.. a) This file is free software; you can redistribute it and/or
+..    modify it under the terms of the GNU General Public License as
+..    published by the Free Software Foundation; either version 2 of
+..    the License, or (at your option) any later version.
+..
+..    This file is distributed in the hope that it will be useful,
+..    but WITHOUT ANY WARRANTY; without even the implied warranty of
+..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+..    GNU General Public License for more details.
+..
+.. Or, alternatively,
+..
+.. b) Permission is granted to copy, distribute and/or modify this
+..    document under the terms of the GNU Free Documentation License,
+..    Version 1.1 or any later version published by the Free Software
+..    Foundation, with no Invariant Sections, no Front-Cover Texts
+..    and no Back-Cover Texts. A copy of the license is included at
+..    Documentation/media/uapi/fdl-appendix.rst.
+..
+.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections

 .. _media_request_ioc_queue:

--- a/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst
+++ b/Documentation/media/uapi/mediactl/media-request-ioc-reinit.rst
@ -1,4 +1,28 @@
-.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+.. This file is dual-licensed: you can use it either under the terms
+.. of the GPL or the GFDL 1.1+ license, at your option. Note that this
+.. dual licensing only applies to this file, and not this project as a
+.. whole.
+..
+.. a) This file is free software; you can redistribute it and/or
+..    modify it under the terms of the GNU General Public License as
+..    published by the Free Software Foundation; either version 2 of
+..    the License, or (at your option) any later version.
+..
+..    This file is distributed in the hope that it will be useful,
+..    but WITHOUT ANY WARRANTY; without even the implied warranty of
+..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+..    GNU General Public License for more details.
+..
+.. Or, alternatively,
+..
+.. b) Permission is granted to copy, distribute and/or modify this
+..    document under the terms of the GNU Free Documentation License,
+..    Version 1.1 or any later version published by the Free Software
+..    Foundation, with no Invariant Sections, no Front-Cover Texts
+..    and no Back-Cover Texts. A copy of the license is included at
+..    Documentation/media/uapi/fdl-appendix.rst.
+..
+.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections

 .. _media_request_ioc_reinit:

--- a/Documentation/media/uapi/mediactl/request-api.rst
+++ b/Documentation/media/uapi/mediactl/request-api.rst
@ -1,4 +1,28 @@
-.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+.. This file is dual-licensed: you can use it either under the terms
+.. of the GPL or the GFDL 1.1+ license, at your option. Note that this
+.. dual licensing only applies to this file, and not this project as a
+.. whole.
+..
+.. a) This file is free software; you can redistribute it and/or
+..    modify it under the terms of the GNU General Public License as
+..    published by the Free Software Foundation; either version 2 of
+..    the License, or (at your option) any later version.
+..
+..    This file is distributed in the hope that it will be useful,
+..    but WITHOUT ANY WARRANTY; without even the implied warranty of
+..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+..    GNU General Public License for more details.
+..
+.. Or, alternatively,
+..
+.. b) Permission is granted to copy, distribute and/or modify this
+..    document under the terms of the GNU Free Documentation License,
+..    Version 1.1 or any later version published by the Free Software
+..    Foundation, with no Invariant Sections, no Front-Cover Texts
+..    and no Back-Cover Texts. A copy of the license is included at
+..    Documentation/media/uapi/fdl-appendix.rst.
+..
+.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections

 .. _media-request-api:

--- a/Documentation/media/uapi/mediactl/request-func-close.rst
+++ b/Documentation/media/uapi/mediactl/request-func-close.rst
@ -1,4 +1,28 @@
-.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+.. This file is dual-licensed: you can use it either under the terms
+.. of the GPL or the GFDL 1.1+ license, at your option. Note that this
+.. dual licensing only applies to this file, and not this project as a
+.. whole.
+..
+.. a) This file is free software; you can redistribute it and/or
+..    modify it under the terms of the GNU General Public License as
+..    published by the Free Software Foundation; either version 2 of
+..    the License, or (at your option) any later version.
+..
+..    This file is distributed in the hope that it will be useful,
+..    but WITHOUT ANY WARRANTY; without even the implied warranty of
+..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+..    GNU General Public License for more details.
+..
+.. Or, alternatively,
+..
+.. b) Permission is granted to copy, distribute and/or modify this
+..    document under the terms of the GNU Free Documentation License,
+..    Version 1.1 or any later version published by the Free Software
+..    Foundation, with no Invariant Sections, no Front-Cover Texts
+..    and no Back-Cover Texts. A copy of the license is included at
+..    Documentation/media/uapi/fdl-appendix.rst.
+..
+.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections

 .. _request-func-close:

--- a/Documentation/media/uapi/mediactl/request-func-ioctl.rst
+++ b/Documentation/media/uapi/mediactl/request-func-ioctl.rst
@ -1,4 +1,28 @@
-.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+.. This file is dual-licensed: you can use it either under the terms
+.. of the GPL or the GFDL 1.1+ license, at your option. Note that this
+.. dual licensing only applies to this file, and not this project as a
+.. whole.
+..
+.. a) This file is free software; you can redistribute it and/or
+..    modify it under the terms of the GNU General Public License as
+..    published by the Free Software Foundation; either version 2 of
+..    the License, or (at your option) any later version.
+..
+..    This file is distributed in the hope that it will be useful,
+..    but WITHOUT ANY WARRANTY; without even the implied warranty of
+..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+..    GNU General Public License for more details.
+..
+.. Or, alternatively,
+..
+.. b) Permission is granted to copy, distribute and/or modify this
+..    document under the terms of the GNU Free Documentation License,
+..    Version 1.1 or any later version published by the Free Software
+..    Foundation, with no Invariant Sections, no Front-Cover Texts
+..    and no Back-Cover Texts. A copy of the license is included at
+..    Documentation/media/uapi/fdl-appendix.rst.
+..
+.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections

 .. _request-func-ioctl:

--- a/Documentation/media/uapi/mediactl/request-func-poll.rst
+++ b/Documentation/media/uapi/mediactl/request-func-poll.rst
@ -1,4 +1,28 @@
-.. SPDX-License-Identifier: GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections
+.. This file is dual-licensed: you can use it either under the terms
+.. of the GPL or the GFDL 1.1+ license, at your option. Note that this
+.. dual licensing only applies to this file, and not this project as a
+.. whole.
+..
+.. a) This file is free software; you can redistribute it and/or
+..    modify it under the terms of the GNU General Public License as
+..    published by the Free Software Foundation; either version 2 of
+..    the License, or (at your option) any later version.
+..
+..    This file is distributed in the hope that it will be useful,
+..    but WITHOUT ANY WARRANTY; without even the implied warranty of
+..    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+..    GNU General Public License for more details.
+..
+.. Or, alternatively,
+..
+.. b) Permission is granted to copy, distribute and/or modify this
+..    document under the terms of the GNU Free Documentation License,
+..    Version 1.1 or any later version published by the Free Software
+..    Foundation, with no Invariant Sections, no Front-Cover Texts
+..    and no Back-Cover Texts. A copy of the license is included at
+..    Documentation/media/uapi/fdl-appendix.rst.
+..
+.. TODO: replace it to GPL-2.0 OR GFDL-1.1-or-later WITH no-invariant-sections

 .. _request-func-poll:

--- a/Documentation/userspace-api/spec_ctrl.rst
+++ b/Documentation/userspace-api/spec_ctrl.rst
@ -92,3 +92,12 @@ Speculation misfeature controls
   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_ENABLE, 0, 0);
   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_DISABLE, 0, 0);
   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_FORCE_DISABLE, 0, 0);
+
+- PR_SPEC_INDIR_BRANCH: Indirect Branch Speculation in User Processes
+                        (Mitigate Spectre V2 style attacks against user processes)
+
+  Invocations:
+   * prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, 0, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_ENABLE, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_DISABLE, 0, 0);
+   * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_FORCE_DISABLE, 0, 0);
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@ -61,18 +61,6 @@ Protocol 2.12:	(Kernel 3.8) Added the xloadflags field and extension fields
 	 	to struct boot_params for loading bzImage and ramdisk
 		above 4G in 64bit.

-Protocol 2.13:	(Kernel 3.14) Support 32- and 64-bit flags being set in
-		xloadflags to support booting a 64-bit kernel from 32-bit
-		EFI
-
-Protocol 2.14:	(Kernel 4.20) Added acpi_rsdp_addr holding the physical
-		address of the ACPI RSDP table.
-		The bootloader updates version with:
-		0x8000 | min(kernel-version, bootloader-version)
-		kernel-version being the protocol version supported by
-		the kernel and bootloader-version the protocol version
-		supported by the bootloader.
-
 **** MEMORY LAYOUT

 The traditional memory map for the kernel loader, used for Image or
@ -209,7 +197,6 @@ Offset	Proto	Name		Meaning
 0258/8	2.10+	pref_address	Preferred loading address
 0260/4	2.10+	init_size	Linear memory required during initialization
 0264/4	2.11+	handover_offset	Offset of handover entry point
-0268/8	2.14+	acpi_rsdp_addr	Physical address of RSDP table

 (1) For backwards compatibility, if the setup_sects field contains 0, the
    real value is 4.
@ -322,7 +309,7 @@ Protocol:	2.00+
  Contains the magic number "HdrS" (0x53726448).

 Field name:	version
-Type:		modify
+Type:		read
 Offset/size:	0x206/2
 Protocol:	2.00+

@ -330,12 +317,6 @@ Protocol:	2.00+
  e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version
  10.17.

-  Up to protocol version 2.13 this information is only read by the
-  bootloader. From protocol version 2.14 onwards the bootloader will
-  write the used protocol version or-ed with 0x8000 to the field. The
-  used protocol version will be the minimum of the supported protocol
-  versions of the bootloader and the kernel.
-
 Field name:	realmode_swtch
 Type:		modify (optional)
 Offset/size:	0x208/4
@ -763,17 +744,6 @@ Offset/size:	0x264/4

  See EFI HANDOVER PROTOCOL below for more details.

-Field name:	acpi_rsdp_addr
-Type:		write
-Offset/size:	0x268/8
-Protocol:	2.14+
-
-  This field can be set by the boot loader to tell the kernel the
-  physical address of the ACPI RSDP table.
-
-  A value of 0 indicates the kernel should fall back to the standard
-  methods to locate the RSDP.
-

 **** THE IMAGE CHECKSUM

--- a/142
+++ b/142
@ -1472,6 +1472,7 @@ F:	drivers/clk/sirf/
 F:	drivers/clocksource/timer-prima2.c
 F:	drivers/clocksource/timer-atlas7.c
 N:	[^a-z]sirf
+X:	drivers/gnss

 ARM/EBSA110 MACHINE SUPPORT
 M:	Russell King <linux@armlinux.org.uk>
@ -1923,7 +1924,6 @@ ARM/QUALCOMM SUPPORT
 M:	Andy Gross <andy.gross@linaro.org>
 M:	David Brown <david.brown@linaro.org>
 L:	linux-arm-msm@vger.kernel.org
-L:	linux-soc@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/soc/qcom/
 F:	arch/arm/boot/dts/qcom-*.dts
@ -2491,7 +2491,7 @@ F:	drivers/net/wireless/ath/*
 ATHEROS ATH5K WIRELESS DRIVER
 M:	Jiri Slaby <jirislaby@gmail.com>
 M:	Nick Kossifidis <mickflemm@gmail.com>
-M:	"Luis R. Rodriguez" <mcgrof@do-not-panic.com>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/ath5k
 S:	Maintained
@ -2801,7 +2801,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git
 Q:	https://patchwork.ozlabs.org/project/netdev/list/?delegate=77147
 S:	Supported
-F:	arch/x86/net/bpf_jit*
+F:	arch/*/net/*
 F:	Documentation/networking/filter.txt
 F:	Documentation/bpf/
 F:	include/linux/bpf*
@ -2821,6 +2821,67 @@ F:	tools/bpf/
 F:	tools/lib/bpf/
 F:	tools/testing/selftests/bpf/

+BPF JIT for ARM
+M:	Shubham Bansal <illusionist.neo@gmail.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/arm/net/
+
+BPF JIT for ARM64
+M:	Daniel Borkmann <daniel@iogearbox.net>
+M:	Alexei Starovoitov <ast@kernel.org>
+M:	Zi Shen Lim <zlim.lnx@gmail.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	arch/arm64/net/
+
+BPF JIT for MIPS (32-BIT AND 64-BIT)
+M:	Paul Burton <paul.burton@mips.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/mips/net/
+
+BPF JIT for NFP NICs
+M:	Jakub Kicinski <jakub.kicinski@netronome.com>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	drivers/net/ethernet/netronome/nfp/bpf/
+
+BPF JIT for POWERPC (32-BIT AND 64-BIT)
+M:	Naveen N. Rao <naveen.n.rao@linux.ibm.com>
+M:	Sandipan Das <sandipan@linux.ibm.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/powerpc/net/
+
+BPF JIT for S390
+M:	Martin Schwidefsky <schwidefsky@de.ibm.com>
+M:	Heiko Carstens <heiko.carstens@de.ibm.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/s390/net/
+X:	arch/s390/net/pnet.c
+
+BPF JIT for SPARC (32-BIT AND 64-BIT)
+M:	David S. Miller <davem@davemloft.net>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/sparc/net/
+
+BPF JIT for X86 32-BIT
+M:	Wang YanQing <udknight@gmail.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	arch/x86/net/bpf_jit_comp32.c
+
+BPF JIT for X86 64-BIT
+M:	Alexei Starovoitov <ast@kernel.org>
+M:	Daniel Borkmann <daniel@iogearbox.net>
+L:	netdev@vger.kernel.org
+S:	Supported
+F:	arch/x86/net/
+X:	arch/x86/net/bpf_jit_comp32.c
+
 BROADCOM B44 10/100 ETHERNET DRIVER
 M:	Michael Chan <michael.chan@broadcom.com>
 L:	netdev@vger.kernel.org
@ -2861,7 +2922,7 @@ F:	drivers/staging/vc04_services
 BROADCOM BCM47XX MIPS ARCHITECTURE
 M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/mips/brcm/
 F:	arch/mips/bcm47xx/*
@ -2870,7 +2931,6 @@ F:	arch/mips/include/asm/mach-bcm47xx/*
 BROADCOM BCM5301X ARM ARCHITECTURE
 M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>
-M:	Jon Mason <jonmason@broadcom.com>
 M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org
 S:	Maintained
@ -2925,7 +2985,7 @@ F:	drivers/cpufreq/bmips-cpufreq.c
 BROADCOM BMIPS MIPS ARCHITECTURE
 M:	Kevin Cernekee <cernekee@gmail.com>
 M:	Florian Fainelli <f.fainelli@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 T:	git git://github.com/broadcom/stblinux.git
 S:	Maintained
 F:	arch/mips/bmips/*
@ -3016,7 +3076,6 @@ F:	drivers/net/ethernet/broadcom/genet/
 BROADCOM IPROC ARM ARCHITECTURE
 M:	Ray Jui <rjui@broadcom.com>
 M:	Scott Branden <sbranden@broadcom.com>
-M:	Jon Mason <jonmason@broadcom.com>
 M:	bcm-kernel-feedback-list@broadcom.com
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://github.com/broadcom/cygnus-linux.git
@ -3063,7 +3122,7 @@ F:	include/uapi/rdma/bnxt_re-abi.h

 BROADCOM NVRAM DRIVER
 M:	Rafał Miłecki <zajec5@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	drivers/firmware/broadcom/*

@ -3213,11 +3272,16 @@ S:	Maintained
 F:	sound/pci/oxygen/

 C-SKY ARCHITECTURE
-M:	Guo Ren <ren_guo@c-sky.com>
+M:	Guo Ren <guoren@kernel.org>
 T:	git https://github.com/c-sky/csky-linux.git
 S:	Supported
 F:	arch/csky/
 F:	Documentation/devicetree/bindings/csky/
+F:	drivers/irqchip/irq-csky-*
+F:	Documentation/devicetree/bindings/interrupt-controller/csky,*
+F:	drivers/clocksource/timer-gx6605s.c
+F:	drivers/clocksource/timer-mp-csky.c
+F:	Documentation/devicetree/bindings/timer/csky,*
 K:	csky
 N:	csky

@ -4165,7 +4229,7 @@ F:	net/decnet/

 DECSTATION PLATFORM SUPPORT
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 W:	http://www.linux-mips.org/wiki/DECstation
 S:	Maintained
 F:	arch/mips/dec/
@ -5256,7 +5320,7 @@ EDAC-CAVIUM OCTEON
 M:	Ralf Baechle <ralf@linux-mips.org>
 M:	David Daney <david.daney@cavium.com>
 L:	linux-edac@vger.kernel.org
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	drivers/edac/octeon_edac*

@ -5774,7 +5838,7 @@ F:	include/uapi/linux/firewire*.h
 F:	tools/firewire/

 FIRMWARE LOADER (request_firmware)
-M:	Luis R. Rodriguez <mcgrof@kernel.org>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/firmware_class/
@ -6258,6 +6322,7 @@ F:	include/uapi/linux/gigaset_dev.h

 GNSS SUBSYSTEM
 M:	Johan Hovold <johan@kernel.org>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss.git
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-class-gnss
 F:	Documentation/devicetree/bindings/gnss/
@ -7703,7 +7768,7 @@ F:	Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt

 IOC3 ETHERNET DRIVER
 M:	Ralf Baechle <ralf@linux-mips.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/sgi/ioc3-eth.c

@ -8074,7 +8139,7 @@ F:	tools/testing/selftests/
 F:	Documentation/dev-tools/kselftest*

 KERNEL USERMODE HELPER
-M:	"Luis R. Rodriguez" <mcgrof@kernel.org>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	kernel/umh.c
@ -8131,7 +8196,7 @@ F:	arch/arm64/kvm/

 KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
 M:	James Hogan <jhogan@kernel.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	arch/mips/include/uapi/asm/kvm*
 F:	arch/mips/include/asm/kvm*
@ -8250,7 +8315,7 @@ F:	mm/kmemleak.c
 F:	mm/kmemleak-test.c

 KMOD KERNEL MODULE LOADER - USERMODE HELPER
-M:	"Luis R. Rodriguez" <mcgrof@kernel.org>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	kernel/kmod.c
@ -8304,7 +8369,7 @@ F:	drivers/net/dsa/lantiq_gswip.c

 LANTIQ MIPS ARCHITECTURE
 M:	John Crispin <john@phrozen.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/lantiq
 F:	drivers/soc/lantiq
@ -8867,7 +8932,7 @@ S:	Maintained

 MARDUK (CREATOR CI40) DEVICE TREE SUPPORT
 M:	Rahul Bedarkar <rahulbedarkar89@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/boot/dts/img/pistachio_marduk.dts

@ -9826,7 +9891,7 @@ F:	drivers/dma/at_xdmac.c

 MICROSEMI MIPS SOCS
 M:	Alexandre Belloni <alexandre.belloni@bootlin.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/generic/board-ocelot.c
 F:	arch/mips/configs/generic/board-ocelot.config
@ -9866,7 +9931,7 @@ MIPS
 M:	Ralf Baechle <ralf@linux-mips.org>
 M:	Paul Burton <paul.burton@mips.com>
 M:	James Hogan <jhogan@kernel.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 W:	http://www.linux-mips.org/
 T:	git git://git.linux-mips.org/pub/scm/ralf/linux.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git
@ -9879,7 +9944,7 @@ F:	drivers/platform/mips/

 MIPS BOSTON DEVELOPMENT BOARD
 M:	Paul Burton <paul.burton@mips.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/clock/img,boston-clock.txt
 F:	arch/mips/boot/dts/img/boston.dts
@ -9889,7 +9954,7 @@ F:	include/dt-bindings/clock/boston-clock.h

 MIPS GENERIC PLATFORM
 M:	Paul Burton <paul.burton@mips.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	Documentation/devicetree/bindings/power/mti,mips-cpc.txt
 F:	arch/mips/generic/
@ -9897,7 +9962,7 @@ F:	arch/mips/tools/generic-board-config.sh

 MIPS/LOONGSON1 ARCHITECTURE
 M:	Keguang Zhang <keguang.zhang@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/loongson32/
 F:	arch/mips/include/asm/mach-loongson32/
@ -9906,7 +9971,7 @@ F:	drivers/*/*/*loongson1*

 MIPS/LOONGSON2 ARCHITECTURE
 M:	Jiaxun Yang <jiaxun.yang@flygoat.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/loongson64/fuloong-2e/
 F:	arch/mips/loongson64/lemote-2f/
@ -9916,7 +9981,7 @@ F:	drivers/*/*/*loongson2*

 MIPS/LOONGSON3 ARCHITECTURE
 M:	Huacai Chen <chenhc@lemote.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/loongson64/
 F:	arch/mips/include/asm/mach-loongson64/
@ -9926,7 +9991,7 @@ F:	drivers/*/*/*loongson3*

 MIPS RINT INSTRUCTION EMULATION
 M:	Aleksandar Markovic <aleksandar.markovic@mips.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	arch/mips/math-emu/sp_rint.c
 F:	arch/mips/math-emu/dp_rint.c
@ -10911,7 +10976,7 @@ F:	include/linux/platform_data/i2c-omap.h

 ONION OMEGA2+ BOARD
 M:	Harvey Hunt <harveyhuntnexus@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/boot/dts/ralink/omega2p.dts

@ -11820,7 +11885,7 @@ F:	drivers/pinctrl/spear/

 PISTACHIO SOC SUPPORT
 M:	James Hartley <james.hartley@sondrel.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Odd Fixes
 F:	arch/mips/pistachio/
 F:	arch/mips/include/asm/mach-pistachio/
@ -12000,7 +12065,7 @@ F:	kernel/printk/
 F:	include/linux/printk.h

 PRISM54 WIRELESS DRIVER
-M:	"Luis R. Rodriguez" <mcgrof@gmail.com>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/p54
 S:	Obsolete
@ -12014,9 +12079,10 @@ S:	Maintained
 F:	fs/proc/
 F:	include/linux/proc_fs.h
 F:	tools/testing/selftests/proc/
+F:	Documentation/filesystems/proc.txt

 PROC SYSCTL
-M:	"Luis R. Rodriguez" <mcgrof@kernel.org>
+M:	Luis Chamberlain <mcgrof@kernel.org>
 M:	Kees Cook <keescook@chromium.org>
 L:	linux-kernel@vger.kernel.org
 L:	linux-fsdevel@vger.kernel.org
@ -12479,7 +12545,7 @@ F:	drivers/media/usb/rainshadow-cec/*

 RALINK MIPS ARCHITECTURE
 M:	John Crispin <john@phrozen.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/ralink

@ -12499,7 +12565,7 @@ F:	drivers/block/brd.c

 RANCHU VIRTUAL BOARD FOR MIPS
 M:	Miodrag Dinic <miodrag.dinic@mips.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Supported
 F:	arch/mips/generic/board-ranchu.c
 F:	arch/mips/configs/generic/board-ranchu.config
@ -13824,6 +13890,13 @@ F:	drivers/md/raid*
 F:	include/linux/raid/
 F:	include/uapi/linux/raid/

+SOCIONEXT (SNI) AVE NETWORK DRIVER
+M:	Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/ethernet/socionext/sni_ave.c
+F:	Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
+
 SOCIONEXT (SNI) NETSEC NETWORK DRIVER
 M:	Jassi Brar <jaswinder.singh@linaro.org>
 L:	netdev@vger.kernel.org
@ -13949,6 +14022,7 @@ S:	Supported
 F:	Documentation/devicetree/bindings/sound/
 F:	Documentation/sound/soc/
 F:	sound/soc/
+F:	include/dt-bindings/sound/
 F:	include/sound/soc*

 SOUNDWIRE SUBSYSTEM
@ -15234,7 +15308,7 @@ F:	arch/um/os-Linux/drivers/
 TURBOCHANNEL SUBSYSTEM
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 M:	Ralf Baechle <ralf@linux-mips.org>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 Q:	http://patchwork.linux-mips.org/project/linux-mips/list/
 S:	Maintained
 F:	drivers/tc/
@ -16055,7 +16129,7 @@ F:	drivers/net/vmxnet3/

 VOCORE VOCORE2 BOARD
 M:	Harvey Hunt <harveyhuntnexus@gmail.com>
-L:	linux-mips@linux-mips.org
+L:	linux-mips@vger.kernel.org
 S:	Maintained
 F:	arch/mips/boot/dts/ralink/vocore2.dts

--- a/2
+++ b/2
@ -2,7 +2,7 @@
 VERSION = 4
 PATCHLEVEL = 20
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc6
 NAME = Shy Crocodile

 # *DOCUMENTATION*
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@ -109,7 +109,7 @@ endmenu

 choice
 	prompt "ARC Instruction Set"
-	default ISA_ARCOMPACT
+	default ISA_ARCV2

 config ISA_ARCOMPACT
 	bool "ARCompact ISA"
@ -176,13 +176,11 @@ endchoice

 config CPU_BIG_ENDIAN
 	bool "Enable Big Endian Mode"
-	default n
 	help
 	  Build kernel for Big Endian Mode of ARC CPU

 config SMP
 	bool "Symmetric Multi-Processing"
-	default n
 	select ARC_MCIP if ISA_ARCV2
 	help
 	  This enables support for systems with more than one CPU.
@ -254,7 +252,6 @@ config ARC_CACHE_PAGES
 config ARC_CACHE_VIPT_ALIASING
 	bool "Support VIPT Aliasing D$"
 	depends on ARC_HAS_DCACHE && ISA_ARCOMPACT
-	default n

 endif	#ARC_CACHE

@ -262,7 +259,6 @@ config ARC_HAS_ICCM
 	bool "Use ICCM"
 	help
 	  Single Cycle RAMS to store Fast Path Code
-	default n

 config ARC_ICCM_SZ
 	int "ICCM Size in KB"
@ -273,7 +269,6 @@ config ARC_HAS_DCCM
 	bool "Use DCCM"
 	help
 	  Single Cycle RAMS to store Fast Path Data
-	default n

 config ARC_DCCM_SZ
 	int "DCCM Size in KB"
@ -366,13 +361,11 @@ if ISA_ARCOMPACT

 config ARC_COMPACT_IRQ_LEVELS
 	bool "Setup Timer IRQ as high Priority"
-	default n
 	# if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
 	depends on !SMP

 config ARC_FPU_SAVE_RESTORE
 	bool "Enable FPU state persistence across context switch"
-	default n
 	help
 	  Double Precision Floating Point unit had dedicated regs which
 	  need to be saved/restored across context-switch.
@ -453,7 +446,6 @@ config HIGHMEM

 config ARC_HAS_PAE40
 	bool "Support for the 40-bit Physical Address Extension"
-	default n
 	depends on ISA_ARCV2
 	select HIGHMEM
 	select PHYS_ADDR_T_64BIT
@ -496,7 +488,6 @@ config HZ

 config ARC_METAWARE_HLINK
 	bool "Support for Metaware debugger assisted Host access"
-	default n
 	help
 	  This options allows a Linux userland apps to directly access
 	  host file system (open/creat/read/write etc) with help from
@ -524,13 +515,11 @@ config ARC_DW2_UNWIND

 config ARC_DBG_TLB_PARANOIA
 	bool "Paranoia Checks in Low Level TLB Handlers"
-	default n

 endif

 config ARC_UBOOT_SUPPORT
 	bool "Support uboot arg Handling"
-	default n
 	help
 	  ARC Linux by default checks for uboot provided args as pointers to
 	  external cmdline or DTB. This however breaks in absence of uboot,
--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@ -6,7 +6,7 @@
 # published by the Free Software Foundation.
 #

-KBUILD_DEFCONFIG := nsim_700_defconfig
+KBUILD_DEFCONFIG := nsim_hs_defconfig

 cflags-y	+= -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
 cflags-$(CONFIG_ISA_ARCOMPACT)	+= -mA7
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@ -222,6 +222,21 @@
 			bus-width = <4>;
 			dma-coherent;
 		};
+
+		gpio: gpio@3000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x3000 0x20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio_port_a: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <24>;
+				reg = <0>;
+			};
+		};
 	};

 	memory@80000000 {
--- a/arch/arc/configs/axs101_defconfig
+++ b/arch/arc/configs/axs101_defconfig
@ -14,6 +14,7 @@ CONFIG_PERF_EVENTS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
 CONFIG_MODULE_UNLOAD=y
@ -95,6 +96,7 @@ CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
--- a/arch/arc/configs/axs103_defconfig
+++ b/arch/arc/configs/axs103_defconfig
@ -94,6 +94,7 @@ CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
--- a/arch/arc/configs/axs103_smp_defconfig
+++ b/arch/arc/configs/axs103_smp_defconfig
@ -97,6 +97,7 @@ CONFIG_VFAT_FS=y
 CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
--- a/arch/arc/configs/hsdk_defconfig
+++ b/arch/arc/configs/hsdk_defconfig
@ -45,6 +45,9 @@ CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
 CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HW_RANDOM is not set
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_DWAPB=y
 # CONFIG_HWMON is not set
 CONFIG_DRM=y
 # CONFIG_DRM_FBDEV_EMULATION is not set
@ -65,6 +68,7 @@ CONFIG_EXT3_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
--- a/arch/arc/configs/nps_defconfig
+++ b/arch/arc/configs/nps_defconfig
@ -15,6 +15,7 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
@ -73,6 +74,7 @@ CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_ROOT_NFS=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
--- a/arch/arc/configs/nsim_700_defconfig
+++ b/arch/arc/configs/nsim_700_defconfig
@ -15,6 +15,7 @@ CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_LBDAF is not set
--- a/arch/arc/configs/nsimosci_defconfig
+++ b/arch/arc/configs/nsimosci_defconfig
@ -15,6 +15,7 @@ CONFIG_EMBEDDED=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
 # CONFIG_LBDAF is not set
@ -66,5 +67,6 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
--- a/arch/arc/configs/nsimosci_hs_defconfig
+++ b/arch/arc/configs/nsimosci_hs_defconfig
@ -65,5 +65,6 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
--- a/arch/arc/configs/nsimosci_hs_smp_defconfig
+++ b/arch/arc/configs/nsimosci_hs_smp_defconfig
@ -76,6 +76,7 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_TMPFS=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FTRACE=y
--- a/arch/arc/configs/tb10x_defconfig
+++ b/arch/arc/configs/tb10x_defconfig
@ -19,6 +19,7 @@ CONFIG_KALLSYMS_ALL=y
 # CONFIG_AIO is not set
 CONFIG_EMBEDDED=y
 # CONFIG_COMPAT_BRK is not set
+CONFIG_ISA_ARCOMPACT=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_FORCE_LOAD=y
--- a/arch/arc/configs/vdk_hs38_defconfig
+++ b/arch/arc/configs/vdk_hs38_defconfig
@ -85,6 +85,7 @@ CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
--- a/arch/arc/configs/vdk_hs38_smp_defconfig
+++ b/arch/arc/configs/vdk_hs38_smp_defconfig
@ -90,6 +90,7 @@ CONFIG_NTFS_FS=y
 CONFIG_TMPFS=y
 CONFIG_JFFS2_FS=y
 CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_WARN_DEPRECATED is not set
--- a/arch/arc/include/asm/cache.h
+++ b/arch/arc/include/asm/cache.h
@ -113,7 +113,9 @@ extern unsigned long perip_base, perip_end;

 /* IO coherency related Auxiliary registers */
 #define ARC_REG_IO_COH_ENABLE	0x500
+#define ARC_IO_COH_ENABLE_BIT	BIT(0)
 #define ARC_REG_IO_COH_PARTIAL	0x501
+#define ARC_IO_COH_PARTIAL_BIT	BIT(0)
 #define ARC_REG_IO_COH_AP0_BASE	0x508
 #define ARC_REG_IO_COH_AP0_SIZE	0x509

--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@ -12,6 +12,7 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 #include <asm/page.h>
+#include <asm/unaligned.h>

 #ifdef CONFIG_ISA_ARCV2
 #include <asm/barrier.h>
@ -94,6 +95,42 @@ static inline u32 __raw_readl(const volatile void __iomem *addr)
 	return w;
 }

+/*
+ * {read,write}s{b,w,l}() repeatedly access the same IO address in
+ * native endianness in 8-, 16-, 32-bit chunks {into,from} memory,
+ * @count times
+ */
+#define __raw_readsx(t,f) \
+static inline void __raw_reads##f(const volatile void __iomem *addr,	\
+				  void *ptr, unsigned int count)	\
+{									\
+	bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0;	\
+	u##t *buf = ptr;						\
+									\
+	if (!count)							\
+		return;							\
+									\
+	/* Some ARC CPU's don't support unaligned accesses */		\
+	if (is_aligned) {						\
+		do {							\
+			u##t x = __raw_read##f(addr);			\
+			*buf++ = x;					\
+		} while (--count);					\
+	} else {							\
+		do {							\
+			u##t x = __raw_read##f(addr);			\
+			put_unaligned(x, buf++);			\
+		} while (--count);					\
+	}								\
+}
+
+#define __raw_readsb __raw_readsb
+__raw_readsx(8, b)
+#define __raw_readsw __raw_readsw
+__raw_readsx(16, w)
+#define __raw_readsl __raw_readsl
+__raw_readsx(32, l)
+
 #define __raw_writeb __raw_writeb
 static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
 {
@ -126,6 +163,35 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)

 }

+#define __raw_writesx(t,f)						\
+static inline void __raw_writes##f(volatile void __iomem *addr, 	\
+				   const void *ptr, unsigned int count)	\
+{									\
+	bool is_aligned = ((unsigned long)ptr % ((t) / 8)) == 0;	\
+	const u##t *buf = ptr;						\
+									\
+	if (!count)							\
+		return;							\
+									\
+	/* Some ARC CPU's don't support unaligned accesses */		\
+	if (is_aligned) {						\
+		do {							\
+			__raw_write##f(*buf++, addr);			\
+		} while (--count);					\
+	} else {							\
+		do {							\
+			__raw_write##f(get_unaligned(buf++), addr);	\
+		} while (--count);					\
+	}								\
+}
+
+#define __raw_writesb __raw_writesb
+__raw_writesx(8, b)
+#define __raw_writesw __raw_writesw
+__raw_writesx(16, w)
+#define __raw_writesl __raw_writesl
+__raw_writesx(32, l)
+
 /*
 * MMIO can also get buffered/optimized in micro-arch, so barriers needed
 * Based on ARM model for the typical use case
@ -141,10 +207,16 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
 #define readb(c)		({ u8  __v = readb_relaxed(c); __iormb(); __v; })
 #define readw(c)		({ u16 __v = readw_relaxed(c); __iormb(); __v; })
 #define readl(c)		({ u32 __v = readl_relaxed(c); __iormb(); __v; })
+#define readsb(p,d,l)		({ __raw_readsb(p,d,l); __iormb(); })
+#define readsw(p,d,l)		({ __raw_readsw(p,d,l); __iormb(); })
+#define readsl(p,d,l)		({ __raw_readsl(p,d,l); __iormb(); })

 #define writeb(v,c)		({ __iowmb(); writeb_relaxed(v,c); })
 #define writew(v,c)		({ __iowmb(); writew_relaxed(v,c); })
 #define writel(v,c)		({ __iowmb(); writel_relaxed(v,c); })
+#define writesb(p,d,l)		({ __iowmb(); __raw_writesb(p,d,l); })
+#define writesw(p,d,l)		({ __iowmb(); __raw_writesw(p,d,l); })
+#define writesl(p,d,l)		({ __iowmb(); __raw_writesl(p,d,l); })

 /*
 * Relaxed API for drivers which can handle barrier ordering themselves
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@ -243,7 +243,7 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 {
 	struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
 	struct bcr_identity *core = &cpu->core;
-	int i, n = 0;
+	int i, n = 0, ua = 0;

 	FIX_PTR(cpu);

@ -263,10 +263,13 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
 		       IS_AVAIL2(cpu->extn.rtc, "RTC [UP 64-bit] ", CONFIG_ARC_TIMERS_64BIT),
 		       IS_AVAIL2(cpu->extn.gfrc, "GFRC [SMP 64-bit] ", CONFIG_ARC_TIMERS_64BIT));

-	n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s",
+#ifdef __ARC_UNALIGNED__
+	ua = 1;
+#endif
+	n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s%s",
 			   IS_AVAIL2(cpu->isa.atomic, "atomic ", CONFIG_ARC_HAS_LLSC),
 			   IS_AVAIL2(cpu->isa.ldd, "ll64 ", CONFIG_ARC_HAS_LL64),
-			   IS_AVAIL1(cpu->isa.unalign, "unalign (not used)"));
+			   IS_AVAIL1(cpu->isa.unalign, "unalign "), IS_USED_RUN(ua));

 	if (i)
 		n += scnprintf(buf + n, len - n, "\n\t\t: ");
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@ -1144,6 +1144,20 @@ noinline void __init arc_ioc_setup(void)
 {
 	unsigned int ioc_base, mem_sz;

+	/*
+	 * If IOC was already enabled (due to bootloader) it technically needs to
+	 * be reconfigured with aperture base,size corresponding to Linux memory map
+	 * which will certainly be different than uboot's. But disabling and
+	 * reenabling IOC when DMA might be potentially active is tricky business.
+	 * To avoid random memory issues later, just panic here and ask user to
+	 * upgrade bootloader to one which doesn't enable IOC
+	 */
+	if (read_aux_reg(ARC_REG_IO_COH_ENABLE) & ARC_IO_COH_ENABLE_BIT)
+		panic("IOC already enabled, please upgrade bootloader!\n");
+
+	if (!ioc_enable)
+		return;
+
 	/*
 	 * As for today we don't support both IOC and ZONE_HIGHMEM enabled
 	 * simultaneously. This happens because as of today IOC aperture covers
@ -1187,8 +1201,8 @@ noinline void __init arc_ioc_setup(void)
 		panic("IOC Aperture start must be aligned to the size of the aperture");

 	write_aux_reg(ARC_REG_IO_COH_AP0_BASE, ioc_base >> 12);
-	write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1);
-	write_aux_reg(ARC_REG_IO_COH_ENABLE, 1);
+	write_aux_reg(ARC_REG_IO_COH_PARTIAL, ARC_IO_COH_PARTIAL_BIT);
+	write_aux_reg(ARC_REG_IO_COH_ENABLE, ARC_IO_COH_ENABLE_BIT);

 	/* Re-enable L1 dcache */
 	__dc_enable();
@ -1265,7 +1279,7 @@ void __init arc_cache_init_master(void)
 	if (is_isa_arcv2() && l2_line_sz && !slc_enable)
 		arc_slc_disable();

-	if (is_isa_arcv2() && ioc_enable)
+	if (is_isa_arcv2() && ioc_exists)
 		arc_ioc_setup();

 	if (is_isa_arcv2() && l2_line_sz && slc_enable) {
--- a/arch/arc/mm/fault.c
+++ b/arch/arc/mm/fault.c
@ -66,7 +66,7 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 	struct vm_area_struct *vma = NULL;
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->mm;
-	int si_code;
+	int si_code = 0;
 	int ret;
 	vm_fault_t fault;
 	int write = regs->ecr_cause & ECR_C_PROTV_STORE;  /* ST/EX */
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@ -228,7 +228,7 @@
 	vmmc-supply = <&vmmc_fixed>;
 	bus-width = <4>;
 	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
-	cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */
+	cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
 };

 &mmc3 {
--- a/arch/arm/boot/dts/am3517-som.dtsi
+++ b/arch/arm/boot/dts/am3517-som.dtsi
@ -163,7 +163,7 @@
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */
+		interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */
 		ref-clock-frequency = <26000000>;
 		tcxo-clock-frequency = <26000000>;
 	};
--- a/arch/arm/boot/dts/imx51-zii-rdu1.dts
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@ -492,12 +492,6 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";

-	eeprom@50 {
-		compatible = "atmel,24c04";
-		pagesize = <16>;
-		reg = <0x50>;
-	};
-
 	hpa1: amp@60 {
 		compatible = "ti,tpa6130a2";
 		reg = <0x60>;
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@ -129,7 +129,7 @@
 };

 &mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
 	pinctrl-0 = <&mmc3_pins &wl127x_gpio>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;
--- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
@ -35,7 +35,7 @@
 * jumpering combinations for the long run.
 */
 &mmc3 {
-	interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>;
+	interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>;
 	pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>;
 	pinctrl-names = "default";
 	vmmc-supply = <&wl12xx_vmmc>;
--- a/arch/arm/boot/dts/rk3288-veyron.dtsi
+++ b/arch/arm/boot/dts/rk3288-veyron.dtsi
@ -10,7 +10,11 @@
 #include "rk3288.dtsi"

 / {
-	memory@0 {
+	/*
+	 * The default coreboot on veyron devices ignores memory@0 nodes
+	 * and would instead create another memory node.
+	 */
+	memory {
 		device_type = "memory";
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@ -314,7 +314,7 @@
 				  0x1 0x0 0x60000000 0x10000000
 				  0x2 0x0 0x70000000 0x10000000
 				  0x3 0x0 0x80000000 0x10000000>;
-			clocks = <&mck>;
+			clocks = <&h32ck>;
 			status = "disabled";

 			nand_controller: nand-controller {
--- a/arch/arm/kernel/ftrace.c
+++ b/arch/arm/kernel/ftrace.c
@ -183,9 +183,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 			   unsigned long frame_pointer)
 {
 	unsigned long return_hooker = (unsigned long) &return_to_handler;
-	struct ftrace_graph_ent trace;
 	unsigned long old;
-	int err;

 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
@ -193,21 +191,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	old = *parent;
 	*parent = return_hooker;

-	trace.func = self_addr;
-	trace.depth = current->curr_ret_stack + 1;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace)) {
+	if (function_graph_enter(old, self_addr, frame_pointer, NULL))
 		*parent = old;
-		return;
-	}
-
-	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
-				       frame_pointer, NULL);
-	if (err == -EBUSY) {
-		*parent = old;
-		return;
-	}
 }

 #ifdef CONFIG_DYNAMIC_FTRACE
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@ -759,7 +759,9 @@ static struct davinci_id da830_ids[] = {
 };

 static struct davinci_gpio_platform_data da830_gpio_platform_data = {
-	.ngpio = 128,
+	.no_auto_base	= true,
+	.base		= 0,
+	.ngpio		= 128,
 };

 int __init da830_register_gpio(void)
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@ -719,7 +719,9 @@ int __init da850_register_vpif_capture(struct vpif_capture_config
 }

 static struct davinci_gpio_platform_data da850_gpio_platform_data = {
-	.ngpio = 144,
+	.no_auto_base	= true,
+	.base		= 0,
+	.ngpio		= 144,
 };

 int __init da850_register_gpio(void)
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@ -701,6 +701,46 @@ static struct resource da8xx_gpio_resources[] = {
 	},
 	{ /* interrupt */
 		.start	= IRQ_DA8XX_GPIO0,
+		.end	= IRQ_DA8XX_GPIO0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO1,
+		.end	= IRQ_DA8XX_GPIO1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO2,
+		.end	= IRQ_DA8XX_GPIO2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO3,
+		.end	= IRQ_DA8XX_GPIO3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO4,
+		.end	= IRQ_DA8XX_GPIO4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO5,
+		.end	= IRQ_DA8XX_GPIO5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO6,
+		.end	= IRQ_DA8XX_GPIO6,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO7,
+		.end	= IRQ_DA8XX_GPIO7,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DA8XX_GPIO8,
 		.end	= IRQ_DA8XX_GPIO8,
 		.flags	= IORESOURCE_IRQ,
 	},
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@ -548,12 +548,44 @@ static struct resource dm355_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM355_GPIOBNK0,
+		.end	= IRQ_DM355_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK1,
+		.end	= IRQ_DM355_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK2,
+		.end	= IRQ_DM355_GPIOBNK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK3,
+		.end	= IRQ_DM355_GPIOBNK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK4,
+		.end	= IRQ_DM355_GPIOBNK4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK5,
+		.end	= IRQ_DM355_GPIOBNK5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM355_GPIOBNK6,
 		.end	= IRQ_DM355_GPIOBNK6,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

 static struct davinci_gpio_platform_data dm355_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 104,
 };

--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@ -267,12 +267,49 @@ static struct resource dm365_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM365_GPIO0,
+		.end	= IRQ_DM365_GPIO0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO1,
+		.end	= IRQ_DM365_GPIO1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO2,
+		.end	= IRQ_DM365_GPIO2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO3,
+		.end	= IRQ_DM365_GPIO3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO4,
+		.end	= IRQ_DM365_GPIO4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO5,
+		.end	= IRQ_DM365_GPIO5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO6,
+		.end	= IRQ_DM365_GPIO6,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM365_GPIO7,
 		.end	= IRQ_DM365_GPIO7,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

 static struct davinci_gpio_platform_data dm365_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 104,
 	.gpio_unbanked	= 8,
 };
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@ -492,12 +492,34 @@ static struct resource dm644_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_GPIOBNK0,
+		.end	= IRQ_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK1,
+		.end	= IRQ_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK2,
+		.end	= IRQ_GPIOBNK2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK3,
+		.end	= IRQ_GPIOBNK3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_GPIOBNK4,
 		.end	= IRQ_GPIOBNK4,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

 static struct davinci_gpio_platform_data dm644_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 71,
 };

--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@ -442,12 +442,24 @@ static struct resource dm646x_gpio_resources[] = {
 	},
 	{	/* interrupt */
 		.start	= IRQ_DM646X_GPIOBNK0,
+		.end	= IRQ_DM646X_GPIOBNK0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_GPIOBNK1,
+		.end	= IRQ_DM646X_GPIOBNK1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.start	= IRQ_DM646X_GPIOBNK2,
 		.end	= IRQ_DM646X_GPIOBNK2,
 		.flags	= IORESOURCE_IRQ,
 	},
 };

 static struct davinci_gpio_platform_data dm646x_gpio_platform_data = {
+	.no_auto_base	= true,
+	.base		= 0,
 	.ngpio		= 43,
 };

--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@ -750,6 +750,9 @@ static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
 	struct modem_private_data *priv = port->private_data;
 	int ret;

+	if (!priv)
+		return;
+
 	if (IS_ERR(priv->regulator))
 		return;

--- a/arch/arm/mach-omap2/prm44xx.c
+++ b/arch/arm/mach-omap2/prm44xx.c
@ -351,7 +351,7 @@ static void omap44xx_prm_reconfigure_io_chain(void)
 * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and
 * omap44xx_prm_reconfigure_io_chain() must be called.  No return value.
 */
-static void __init omap44xx_prm_enable_io_wakeup(void)
+static void omap44xx_prm_enable_io_wakeup(void)
 {
 	s32 inst = omap4_prmst_get_prm_dev_inst();

--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@ -360,14 +360,16 @@ v7_dma_inv_range:
 	ALT_UP(W(nop))
 #endif
 	mcrne	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
+	addne	r0, r0, r2

 	tst	r1, r3
 	bic	r1, r1, r3
 	mcrne	p15, 0, r1, c7, c14, 1		@ clean & invalidate D / U line
-1:
-	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D / U line
-	add	r0, r0, r2
 	cmp	r0, r1
+1:
+	mcrlo	p15, 0, r0, c7, c6, 1		@ invalidate D / U line
+	addlo	r0, r0, r2
+	cmplo	r0, r1
 	blo	1b
 	dsb	st
 	ret	lr
--- a/arch/arm/mm/cache-v7m.S
+++ b/arch/arm/mm/cache-v7m.S
@ -73,9 +73,11 @@
 /*
 * dcimvac: Invalidate data cache line by MVA to PoC
 */
-.macro dcimvac, rt, tmp
-	v7m_cacheop \rt, \tmp, V7M_SCB_DCIMVAC
+.irp    c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
+.macro dcimvac\c, rt, tmp
+	v7m_cacheop \rt, \tmp, V7M_SCB_DCIMVAC, \c
 .endm
+.endr

 /*
 * dccmvau: Clean data cache line by MVA to PoU
@ -369,14 +371,16 @@ v7m_dma_inv_range:
 	tst	r0, r3
 	bic	r0, r0, r3
 	dccimvacne r0, r3
+	addne	r0, r0, r2
 	subne	r3, r2, #1	@ restore r3, corrupted by v7m's dccimvac
 	tst	r1, r3
 	bic	r1, r1, r3
 	dccimvacne r1, r3
-1:
-	dcimvac r0, r3
-	add	r0, r0, r2
 	cmp	r0, r1
+1:
+	dcimvaclo r0, r3
+	addlo	r0, r0, r2
+	cmplo	r0, r1
 	blo	1b
 	dsb	st
 	ret	lr
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@ -829,7 +829,7 @@ static int __arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
 		 void *cpu_addr, dma_addr_t dma_addr, size_t size,
 		 unsigned long attrs)
 {
-	int ret;
+	int ret = -ENXIO;
 	unsigned long nr_vma_pages = vma_pages(vma);
 	unsigned long nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT;
 	unsigned long pfn = dma_to_pfn(dev, dma_addr);
--- a/arch/arm/mm/proc-macros.S
+++ b/arch/arm/mm/proc-macros.S
@ -274,6 +274,13 @@
 	.endm

 .macro define_processor_functions name:req, dabort:req, pabort:req, nommu=0, suspend=0, bugs=0
+/*
+ * If we are building for big.Little with branch predictor hardening,
+ * we need the processor function tables to remain available after boot.
+ */
+#if 1 // defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
+	.section ".rodata"
+#endif
 	.type	\name\()_processor_functions, #object
 	.align 2
 ENTRY(\name\()_processor_functions)
@ -309,6 +316,9 @@ ENTRY(\name\()_processor_functions)
 	.endif

 	.size	\name\()_processor_functions, . - \name\()_processor_functions
+#if 1 // defined(CONFIG_BIG_LITTLE) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
+	.previous
+#endif
 .endm

 .macro define_cache_functions name:req
--- a/arch/arm/probes/kprobes/opt-arm.c
+++ b/arch/arm/probes/kprobes/opt-arm.c
@ -247,7 +247,7 @@ int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *or
 	}

 	/* Copy arch-dep-instance from template. */
-	memcpy(code, &optprobe_template_entry,
+	memcpy(code, (unsigned char *)optprobe_template_entry,
 			TMPL_END_IDX * sizeof(kprobe_opcode_t));

 	/* Adjust buffer according to instruction. */
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@ -497,6 +497,24 @@ config ARM64_ERRATUM_1188873

 	  If unsure, say Y.

+config ARM64_ERRATUM_1286807
+	bool "Cortex-A76: Modification of the translation table for a virtual address might lead to read-after-read ordering violation"
+	default y
+	select ARM64_WORKAROUND_REPEAT_TLBI
+	help
+	  This option adds workaround for ARM Cortex-A76 erratum 1286807
+
+	  On the affected Cortex-A76 cores (r0p0 to r3p0), if a virtual
+	  address for a cacheable mapping of a location is being
+	  accessed by a core while another core is remapping the virtual
+	  address to a new physical page using the recommended
+	  break-before-make sequence, then under very rare circumstances
+	  TLBI+DSB completes before a read using the translation being
+	  invalidated has been observed by other observers. The
+	  workaround repeats the TLBI+DSB operation.
+
+	  If unsure, say Y.
+
 config CAVIUM_ERRATUM_22375
 	bool "Cavium erratum 22375, 24313"
 	default y
@ -566,9 +584,16 @@ config QCOM_FALKOR_ERRATUM_1003
 	  is unchanged. Work around the erratum by invalidating the walk cache
 	  entries for the trampoline before entering the kernel proper.

+config ARM64_WORKAROUND_REPEAT_TLBI
+	bool
+	help
+	  Enable the repeat TLBI workaround for Falkor erratum 1009 and
+	  Cortex-A76 erratum 1286807.
+
 config QCOM_FALKOR_ERRATUM_1009
 	bool "Falkor E1009: Prematurely complete a DSB after a TLBI"
 	default y
+	select ARM64_WORKAROUND_REPEAT_TLBI
 	help
 	  On Falkor v1, the CPU may prematurely complete a DSB following a
 	  TLBI xxIS invalidate maintenance operation. Repeat the TLBI operation
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@ -241,3 +241,7 @@
 		};
 	};
 };
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+};
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@ -343,6 +343,12 @@
 	};
 };

+&gcc {
+	protected-clocks = <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
+};
+
 &i2c10 {
 	status = "okay";
 	clock-frequency = <400000>;
@ -352,6 +358,10 @@
 	status = "okay";
 };

+&tlmm {
+	gpio-reserved-ranges = <0 4>, <81 4>;
+};
+
 &uart9 {
 	status = "okay";
 };
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@ -153,7 +153,7 @@
 };

 &pcie0 {
-	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
+	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_clkreqn_cpm>;
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
@ -57,18 +57,6 @@
 		regulator-always-on;
 		vin-supply = <&vcc_sys>;
 	};
-
-	vdd_log: vdd-log {
-		compatible = "pwm-regulator";
-		pwms = <&pwm2 0 25000 0>;
-		regulator-name = "vdd_log";
-		regulator-min-microvolt = <800000>;
-		regulator-max-microvolt = <1400000>;
-		regulator-always-on;
-		regulator-boot-on;
-		vin-supply = <&vcc_sys>;
-	};
-
 };

 &cpu_l0 {
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@ -36,7 +36,7 @@

 	wkup_uart0: serial@42300000 {
 		compatible = "ti,am654-uart";
-		reg = <0x00 0x42300000 0x00 0x100>;
+		reg = <0x42300000 0x100>;
 		reg-shift = <2>;
 		reg-io-width = <4>;
 		interrupts = <GIC_SPI 697 IRQ_TYPE_LEVEL_HIGH>;
--- a/arch/arm64/include/asm/ftrace.h
+++ b/arch/arm64/include/asm/ftrace.h
@ -56,6 +56,19 @@ static inline bool arch_trace_is_compat_syscall(struct pt_regs *regs)
 {
 	return is_compat_task();
 }
+
+#define ARCH_HAS_SYSCALL_MATCH_SYM_NAME
+
+static inline bool arch_syscall_match_sym_name(const char *sym,
+					       const char *name)
+{
+	/*
+	 * Since all syscall functions have __arm64_ prefix, we must skip it.
+	 * However, as we described above, we decided to ignore compat
+	 * syscalls, so we don't care about __arm64_compat_ prefix here.
+	 */
+	return !strcmp(sym + 8, name);
+}
 #endif /* ifndef __ASSEMBLY__ */

 #endif /* __ASM_FTRACE_H */
--- a/arch/arm64/include/asm/tlbflush.h
+++ b/arch/arm64/include/asm/tlbflush.h
@ -41,14 +41,14 @@
 		   ALTERNATIVE("nop\n			nop",		       \
 			       "dsb ish\n		tlbi " #op,	       \
 			       ARM64_WORKAROUND_REPEAT_TLBI,		       \
-			       CONFIG_QCOM_FALKOR_ERRATUM_1009)		       \
+			       CONFIG_ARM64_WORKAROUND_REPEAT_TLBI)	       \
 			    : : )

 #define __TLBI_1(op, arg) asm ("tlbi " #op ", %0\n"			       \
 		   ALTERNATIVE("nop\n			nop",		       \
 			       "dsb ish\n		tlbi " #op ", %0",     \
 			       ARM64_WORKAROUND_REPEAT_TLBI,		       \
-			       CONFIG_QCOM_FALKOR_ERRATUM_1009)		       \
+			       CONFIG_ARM64_WORKAROUND_REPEAT_TLBI)	       \
 			    : : "r" (arg))

 #define __TLBI_N(op, arg, n, ...) __TLBI_##n(op, arg)
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@ -570,6 +570,20 @@ static const struct midr_range arm64_harden_el2_vectors[] = {

 #endif

+#ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI
+
+static const struct midr_range arm64_repeat_tlbi_cpus[] = {
+#ifdef CONFIG_QCOM_FALKOR_ERRATUM_1009
+	MIDR_RANGE(MIDR_QCOM_FALKOR_V1, 0, 0, 0, 0),
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_1286807
+	MIDR_RANGE(MIDR_CORTEX_A76, 0, 0, 3, 0),
+#endif
+	{},
+};
+
+#endif
+
 const struct arm64_cpu_capabilities arm64_errata[] = {
 #if	defined(CONFIG_ARM64_ERRATUM_826319) || \
 	defined(CONFIG_ARM64_ERRATUM_827319) || \
@ -695,11 +709,11 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.matches = is_kryo_midr,
 	},
 #endif
-#ifdef CONFIG_QCOM_FALKOR_ERRATUM_1009
+#ifdef CONFIG_ARM64_WORKAROUND_REPEAT_TLBI
 	{
-		.desc = "Qualcomm Technologies Falkor erratum 1009",
+		.desc = "Qualcomm erratum 1009, ARM erratum 1286807",
 		.capability = ARM64_WORKAROUND_REPEAT_TLBI,
-		ERRATA_MIDR_REV(MIDR_QCOM_FALKOR_V1, 0, 0),
+		ERRATA_MIDR_RANGE_LIST(arm64_repeat_tlbi_cpus),
 	},
 #endif
 #ifdef CONFIG_ARM64_ERRATUM_858921
--- a/arch/arm64/kernel/ftrace.c
+++ b/arch/arm64/kernel/ftrace.c
@ -216,8 +216,6 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 {
 	unsigned long return_hooker = (unsigned long)&return_to_handler;
 	unsigned long old;
-	struct ftrace_graph_ent trace;
-	int err;

 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;
@ -229,18 +227,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	 */
 	old = *parent;

-	trace.func = self_addr;
-	trace.depth = current->curr_ret_stack + 1;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace))
-		return;
-
-	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
-				       frame_pointer, NULL);
-	if (err == -EBUSY)
-		return;
-	else
+	if (!function_graph_enter(old, self_addr, frame_pointer, NULL))
 		*parent = return_hooker;
 }

--- a/arch/arm64/kernel/hibernate.c
+++ b/arch/arm64/kernel/hibernate.c
@ -214,7 +214,7 @@ static int create_safe_exec_page(void *src_start, size_t length,
 	}

 	memcpy((void *)dst, src_start, length);
-	flush_icache_range(dst, dst + length);
+	__flush_icache_range(dst, dst + length);

 	pgdp = pgd_offset_raw(allocator(mask), dst_addr);
 	if (pgd_none(READ_ONCE(*pgdp))) {
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@ -351,7 +351,8 @@ static void build_epilogue(struct jit_ctx *ctx)
 * >0 - successfully JITed a 16-byte eBPF instruction.
 * <0 - failed to JIT.
 */
-static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
+static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
+		      bool extra_pass)
 {
 	const u8 code = insn->code;
 	const u8 dst = bpf2a64[insn->dst_reg];
@ -625,12 +626,19 @@ emit_cond_jmp:
 	case BPF_JMP | BPF_CALL:
 	{
 		const u8 r0 = bpf2a64[BPF_REG_0];
-		const u64 func = (u64)__bpf_call_base + imm;
+		bool func_addr_fixed;
+		u64 func_addr;
+		int ret;

-		if (ctx->prog->is_func)
-			emit_addr_mov_i64(tmp, func, ctx);
+		ret = bpf_jit_get_func_addr(ctx->prog, insn, extra_pass,
+					    &func_addr, &func_addr_fixed);
+		if (ret < 0)
+			return ret;
+		if (func_addr_fixed)
+			/* We can use optimized emission here. */
+			emit_a64_mov_i64(tmp, func_addr, ctx);
 		else
-			emit_a64_mov_i64(tmp, func, ctx);
+			emit_addr_mov_i64(tmp, func_addr, ctx);
 		emit(A64_BLR(tmp), ctx);
 		emit(A64_MOV(1, r0, A64_R(0)), ctx);
 		break;
@ -753,7 +761,7 @@ emit_cond_jmp:
 	return 0;
 }

-static int build_body(struct jit_ctx *ctx)
+static int build_body(struct jit_ctx *ctx, bool extra_pass)
 {
 	const struct bpf_prog *prog = ctx->prog;
 	int i;
@ -762,7 +770,7 @@ static int build_body(struct jit_ctx *ctx)
 		const struct bpf_insn *insn = &prog->insnsi[i];
 		int ret;

-		ret = build_insn(insn, ctx);
+		ret = build_insn(insn, ctx, extra_pass);
 		if (ret > 0) {
 			i++;
 			if (ctx->image == NULL)
@ -858,7 +866,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	/* 1. Initial fake pass to compute ctx->idx. */

 	/* Fake pass to fill in ctx->offset. */
-	if (build_body(&ctx)) {
+	if (build_body(&ctx, extra_pass)) {
 		prog = orig_prog;
 		goto out_off;
 	}
@ -888,7 +896,7 @@ skip_init_ctx:

 	build_prologue(&ctx, was_classic);

-	if (build_body(&ctx)) {
+	if (build_body(&ctx, extra_pass)) {
 		bpf_jit_binary_free(header);
 		prog = orig_prog;
 		goto out_off;
--- a/arch/csky/include/asm/mmu_context.h
+++ b/arch/csky/include/asm/mmu_context.h
@ -16,7 +16,7 @@

 static inline void tlbmiss_handler_setup_pgd(unsigned long pgd, bool kernel)
 {
-	pgd &= ~(1<<31);
+	pgd -= PAGE_OFFSET;
 	pgd += PHYS_OFFSET;
 	pgd |= 1;
 	setup_pgd(pgd, kernel);
@ -29,7 +29,7 @@ static inline void tlbmiss_handler_setup_pgd(unsigned long pgd, bool kernel)

 static inline unsigned long tlb_get_pgd(void)
 {
-	return ((get_pgd()|(1<<31)) - PHYS_OFFSET) & ~1;
+	return ((get_pgd() - PHYS_OFFSET) & ~1) + PAGE_OFFSET;
 }

 #define cpu_context(cpu, mm)	((mm)->context.asid[cpu])
--- a/arch/ia64/include/asm/numa.h
+++ b/arch/ia64/include/asm/numa.h
@ -59,7 +59,9 @@ extern struct node_cpuid_s node_cpuid[NR_CPUS];
 */

 extern u8 numa_slit[MAX_NUMNODES * MAX_NUMNODES];
-#define node_distance(from,to) (numa_slit[(from) * MAX_NUMNODES + (to)])
+#define slit_distance(from,to) (numa_slit[(from) * MAX_NUMNODES + (to)])
+extern int __node_distance(int from, int to);
+#define node_distance(from,to) __node_distance(from, to)

 extern int paddr_to_nid(unsigned long paddr);

--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@ -578,8 +578,8 @@ void __init acpi_numa_fixup(void)
 	if (!slit_table) {
 		for (i = 0; i < MAX_NUMNODES; i++)
 			for (j = 0; j < MAX_NUMNODES; j++)
-				node_distance(i, j) = i == j ? LOCAL_DISTANCE :
-							REMOTE_DISTANCE;
+				slit_distance(i, j) = i == j ?
+					LOCAL_DISTANCE : REMOTE_DISTANCE;
 		return;
 	}

@ -592,7 +592,7 @@ void __init acpi_numa_fixup(void)
 			if (!pxm_bit_test(j))
 				continue;
 			node_to = pxm_to_node(j);
-			node_distance(node_from, node_to) =
+			slit_distance(node_from, node_to) =
 			    slit_table->entry[i * slit_table->locality_count + j];
 		}
 	}
--- a/arch/ia64/mm/numa.c
+++ b/arch/ia64/mm/numa.c
@ -36,6 +36,12 @@ struct node_cpuid_s node_cpuid[NR_CPUS] =
 */
 u8 numa_slit[MAX_NUMNODES * MAX_NUMNODES];

+int __node_distance(int from, int to)
+{
+	return slit_distance(from, to);
+}
+EXPORT_SYMBOL(__node_distance);
+
 /* Identify which cnode a physical address resides on */
 int
 paddr_to_nid(unsigned long paddr)
--- a/arch/microblaze/kernel/ftrace.c
+++ b/arch/microblaze/kernel/ftrace.c
@ -22,8 +22,7 @@
 void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 {
 	unsigned long old;
-	int faulted, err;
-	struct ftrace_graph_ent trace;
+	int faulted;
 	unsigned long return_hooker = (unsigned long)
 				&return_to_handler;

@ -63,18 +62,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 		return;
 	}

-	err = ftrace_push_return_trace(old, self_addr, &trace.depth, 0, NULL);
-	if (err == -EBUSY) {
+	if (function_graph_enter(old, self_addr, 0, NULL))
 		*parent = old;
-		return;
-	}
-
-	trace.func = self_addr;
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace)) {
-		current->curr_ret_stack--;
-		*parent = old;
-	}
 }
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */

--- a/arch/mips/include/asm/syscall.h
+++ b/arch/mips/include/asm/syscall.h
@ -73,7 +73,7 @@ static inline unsigned long mips_get_syscall_arg(unsigned long *arg,
 #ifdef CONFIG_64BIT
 	case 4: case 5: case 6: case 7:
 #ifdef CONFIG_MIPS32_O32
-		if (test_thread_flag(TIF_32BIT_REGS))
+		if (test_tsk_thread_flag(task, TIF_32BIT_REGS))
 			return get_user(*arg, (int *)usp + n);
 		else
 #endif
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@ -322,7 +322,6 @@ void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
 			   unsigned long fp)
 {
 	unsigned long old_parent_ra;
-	struct ftrace_graph_ent trace;
 	unsigned long return_hooker = (unsigned long)
 	    &return_to_handler;
 	int faulted, insns;
@ -369,12 +368,6 @@ void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
 	if (unlikely(faulted))
 		goto out;

-	if (ftrace_push_return_trace(old_parent_ra, self_ra, &trace.depth, fp,
-				     NULL) == -EBUSY) {
-		*parent_ra_addr = old_parent_ra;
-		return;
-	}
-
 	/*
 	 * Get the recorded ip of the current mcount calling site in the
 	 * __mcount_loc section, which will be used to filter the function
@ -382,13 +375,10 @@ void prepare_ftrace_return(unsigned long *parent_ra_addr, unsigned long self_ra,
 	 */

 	insns = core_kernel_text(self_ra) ? 2 : MCOUNT_OFFSET_INSNS + 1;
-	trace.func = self_ra - (MCOUNT_INSN_SIZE * insns);
+	self_ra -= (MCOUNT_INSN_SIZE * insns);

-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace)) {
-		current->curr_ret_stack--;
+	if (function_graph_enter(old_parent_ra, self_ra, fp, NULL))
 		*parent_ra_addr = old_parent_ra;
-	}
 	return;
 out:
 	ftrace_graph_stop();
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@ -84,7 +84,7 @@ static struct rt2880_pmx_func pcie_rst_grp[] = {
 };
 static struct rt2880_pmx_func nd_sd_grp[] = {
 	FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15),
-	FUNC("sd", MT7620_GPIO_MODE_SD, 45, 15)
+	FUNC("sd", MT7620_GPIO_MODE_SD, 47, 13)
 };

 static struct rt2880_pmx_group mt7620a_pinmux_data[] = {
--- a/arch/nds32/kernel/ftrace.c
+++ b/arch/nds32/kernel/ftrace.c
@ -211,29 +211,15 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 			   unsigned long frame_pointer)
 {
 	unsigned long return_hooker = (unsigned long)&return_to_handler;
-	struct ftrace_graph_ent trace;
 	unsigned long old;
-	int err;

 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return;

 	old = *parent;

-	trace.func = self_addr;
-	trace.depth = current->curr_ret_stack + 1;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace))
-		return;
-
-	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
-				       frame_pointer, NULL);
-
-	if (err == -EBUSY)
-		return;
-
-	*parent = return_hooker;
+	if (!function_graph_enter(old, self_addr, frame_pointer, NULL))
+		*parent = return_hooker;
 }

 noinline void ftrace_graph_caller(void)
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@ -71,6 +71,13 @@ ifdef CONFIG_MLONGCALLS
 KBUILD_CFLAGS_KERNEL += -mlong-calls
 endif

+# Without this, "ld -r" results in .text sections that are too big (> 0x40000)
+# for branches to reach stubs. And multiple .text sections trigger a warning
+# when creating the sysfs module information section.
+ifndef CONFIG_64BIT
+KBUILD_CFLAGS_MODULE += -ffunction-sections
+endif
+
 # select which processor to optimise for
 cflags-$(CONFIG_PA7000)		+= -march=1.1 -mschedule=7100
 cflags-$(CONFIG_PA7200)		+= -march=1.1 -mschedule=7200
--- a/arch/parisc/kernel/ftrace.c
+++ b/arch/parisc/kernel/ftrace.c
@ -30,7 +30,6 @@ static void __hot prepare_ftrace_return(unsigned long *parent,
 					unsigned long self_addr)
 {
 	unsigned long old;
-	struct ftrace_graph_ent trace;
 	extern int parisc_return_to_handler;

 	if (unlikely(ftrace_graph_is_dead()))
@ -41,19 +40,9 @@ static void __hot prepare_ftrace_return(unsigned long *parent,

 	old = *parent;

-	trace.func = self_addr;
-	trace.depth = current->curr_ret_stack + 1;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace))
-		return;
-
-        if (ftrace_push_return_trace(old, self_addr, &trace.depth,
-				     0, NULL) == -EBUSY)
-                return;
-
-	/* activate parisc_return_to_handler() as return point */
-	*parent = (unsigned long) &parisc_return_to_handler;
+	if (!function_graph_enter(old, self_addr, 0, NULL))
+		/* activate parisc_return_to_handler() as return point */
+		*parent = (unsigned long) &parisc_return_to_handler;
 }
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */

--- a/arch/powerpc/kernel/trace/ftrace.c
+++ b/arch/powerpc/kernel/trace/ftrace.c
@ -950,7 +950,6 @@ int ftrace_disable_ftrace_graph_caller(void)
 */
 unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip)
 {
-	struct ftrace_graph_ent trace;
 	unsigned long return_hooker;

 	if (unlikely(ftrace_graph_is_dead()))
@ -961,18 +960,8 @@ unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip)

 	return_hooker = ppc_function_entry(return_to_handler);

-	trace.func = ip;
-	trace.depth = current->curr_ret_stack + 1;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace))
-		goto out;
-
-	if (ftrace_push_return_trace(parent, ip, &trace.depth, 0,
-				     NULL) == -EBUSY)
-		goto out;
-
-	parent = return_hooker;
+	if (!function_graph_enter(parent, ip, 0, NULL))
+		parent = return_hooker;
 out:
 	return parent;
 }
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@ -983,6 +983,7 @@ int kvmppc_pseries_do_hcall(struct kvm_vcpu *vcpu)
 		ret = kvmhv_enter_nested_guest(vcpu);
 		if (ret == H_INTERRUPT) {
 			kvmppc_set_gpr(vcpu, 3, 0);
+			vcpu->arch.hcall_needed = 0;
 			return -EINTR;
 		}
 		break;
--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@ -166,7 +166,33 @@ static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx)
 	PPC_BLR();
 }

-static void bpf_jit_emit_func_call(u32 *image, struct codegen_context *ctx, u64 func)
+static void bpf_jit_emit_func_call_hlp(u32 *image, struct codegen_context *ctx,
+				       u64 func)
+{
+#ifdef PPC64_ELF_ABI_v1
+	/* func points to the function descriptor */
+	PPC_LI64(b2p[TMP_REG_2], func);
+	/* Load actual entry point from function descriptor */
+	PPC_BPF_LL(b2p[TMP_REG_1], b2p[TMP_REG_2], 0);
+	/* ... and move it to LR */
+	PPC_MTLR(b2p[TMP_REG_1]);
+	/*
+	 * Load TOC from function descriptor at offset 8.
+	 * We can clobber r2 since we get called through a
+	 * function pointer (so caller will save/restore r2)
+	 * and since we don't use a TOC ourself.
+	 */
+	PPC_BPF_LL(2, b2p[TMP_REG_2], 8);
+#else
+	/* We can clobber r12 */
+	PPC_FUNC_ADDR(12, func);
+	PPC_MTLR(12);
+#endif
+	PPC_BLRL();
+}
+
+static void bpf_jit_emit_func_call_rel(u32 *image, struct codegen_context *ctx,
+				       u64 func)
 {
 	unsigned int i, ctx_idx = ctx->idx;

@ -273,7 +299,7 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 {
 	const struct bpf_insn *insn = fp->insnsi;
 	int flen = fp->len;
-	int i;
+	int i, ret;

 	/* Start of epilogue code - will only be valid 2nd pass onwards */
 	u32 exit_addr = addrs[flen];
@ -284,8 +310,9 @@ static int bpf_jit_build_body(struct bpf_prog *fp, u32 *image,
 		u32 src_reg = b2p[insn[i].src_reg];
 		s16 off = insn[i].off;
 		s32 imm = insn[i].imm;
+		bool func_addr_fixed;
+		u64 func_addr;
 		u64 imm64;
-		u8 *func;
 		u32 true_cond;
 		u32 tmp_idx;

@ -711,23 +738,15 @@ emit_clear:
 		case BPF_JMP | BPF_CALL:
 			ctx->seen |= SEEN_FUNC;

-			/* bpf function call */
-			if (insn[i].src_reg == BPF_PSEUDO_CALL)
-				if (!extra_pass)
-					func = NULL;
-				else if (fp->aux->func && off < fp->aux->func_cnt)
-					/* use the subprog id from the off
-					 * field to lookup the callee address
-					 */
-					func = (u8 *) fp->aux->func[off]->bpf_func;
-				else
-					return -EINVAL;
-			/* kernel helper call */
+			ret = bpf_jit_get_func_addr(fp, &insn[i], extra_pass,
+						    &func_addr, &func_addr_fixed);
+			if (ret < 0)
+				return ret;
+
+			if (func_addr_fixed)
+				bpf_jit_emit_func_call_hlp(image, ctx, func_addr);
 			else
-				func = (u8 *) __bpf_call_base + imm;
-
-			bpf_jit_emit_func_call(image, ctx, (u64)func);
-
+				bpf_jit_emit_func_call_rel(image, ctx, func_addr);
 			/* move return value from r3 to BPF_REG_0 */
 			PPC_MR(b2p[BPF_REG_0], 3);
 			break;
@ -872,6 +891,55 @@ cond_branch:
 	return 0;
 }

+/* Fix the branch target addresses for subprog calls */
+static int bpf_jit_fixup_subprog_calls(struct bpf_prog *fp, u32 *image,
+				       struct codegen_context *ctx, u32 *addrs)
+{
+	const struct bpf_insn *insn = fp->insnsi;
+	bool func_addr_fixed;
+	u64 func_addr;
+	u32 tmp_idx;
+	int i, ret;
+
+	for (i = 0; i < fp->len; i++) {
+		/*
+		 * During the extra pass, only the branch target addresses for
+		 * the subprog calls need to be fixed. All other instructions
+		 * can left untouched.
+		 *
+		 * The JITed image length does not change because we already
+		 * ensure that the JITed instruction sequence for these calls
+		 * are of fixed length by padding them with NOPs.
+		 */
+		if (insn[i].code == (BPF_JMP | BPF_CALL) &&
+		    insn[i].src_reg == BPF_PSEUDO_CALL) {
+			ret = bpf_jit_get_func_addr(fp, &insn[i], true,
+						    &func_addr,
+						    &func_addr_fixed);
+			if (ret < 0)
+				return ret;
+
+			/*
+			 * Save ctx->idx as this would currently point to the
+			 * end of the JITed image and set it to the offset of
+			 * the instruction sequence corresponding to the
+			 * subprog call temporarily.
+			 */
+			tmp_idx = ctx->idx;
+			ctx->idx = addrs[i] / 4;
+			bpf_jit_emit_func_call_rel(image, ctx, func_addr);
+
+			/*
+			 * Restore ctx->idx here. This is safe as the length
+			 * of the JITed sequence remains unchanged.
+			 */
+			ctx->idx = tmp_idx;
+		}
+	}
+
+	return 0;
+}
+
 struct powerpc64_jit_data {
 	struct bpf_binary_header *header;
 	u32 *addrs;
@ -970,6 +1038,22 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 skip_init_ctx:
 	code_base = (u32 *)(image + FUNCTION_DESCR_SIZE);

+	if (extra_pass) {
+		/*
+		 * Do not touch the prologue and epilogue as they will remain
+		 * unchanged. Only fix the branch target address for subprog
+		 * calls in the body.
+		 *
+		 * This does not change the offsets and lengths of the subprog
+		 * call instruction sequences and hence, the size of the JITed
+		 * image as well.
+		 */
+		bpf_jit_fixup_subprog_calls(fp, code_base, &cgctx, addrs);
+
+		/* There is no need to perform the usual passes. */
+		goto skip_codegen_passes;
+	}
+
 	/* Code generation passes 1-2 */
 	for (pass = 1; pass < 3; pass++) {
 		/* Now build the prologue, body code & epilogue for real. */
@ -983,6 +1067,7 @@ skip_init_ctx:
 				proglen - (cgctx.idx * 4), cgctx.seen);
 	}

+skip_codegen_passes:
 	if (bpf_jit_enable > 1)
 		/*
 		 * Note that we output the base address of the code_base
--- a/arch/riscv/kernel/ftrace.c
+++ b/arch/riscv/kernel/ftrace.c
@ -132,7 +132,6 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 {
 	unsigned long return_hooker = (unsigned long)&return_to_handler;
 	unsigned long old;
-	struct ftrace_graph_ent trace;
 	int err;

 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
@ -144,17 +143,8 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr,
 	 */
 	old = *parent;

-	trace.func = self_addr;
-	trace.depth = current->curr_ret_stack + 1;
-
-	if (!ftrace_graph_entry(&trace))
-		return;
-
-	err = ftrace_push_return_trace(old, self_addr, &trace.depth,
-				       frame_pointer, parent);
-	if (err == -EBUSY)
-		return;
-	*parent = return_hooker;
+	if (function_graph_enter(old, self_addr, frame_pointer, parent))
+		*parent = return_hooker;
 }

 #ifdef CONFIG_DYNAMIC_FTRACE
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@ -203,22 +203,13 @@ device_initcall(ftrace_plt_init);
 */
 unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip)
 {
-	struct ftrace_graph_ent trace;
-
 	if (unlikely(ftrace_graph_is_dead()))
 		goto out;
 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		goto out;
 	ip -= MCOUNT_INSN_SIZE;
-	trace.func = ip;
-	trace.depth = current->curr_ret_stack + 1;
-	/* Only trace if the calling function expects to. */
-	if (!ftrace_graph_entry(&trace))
-		goto out;
-	if (ftrace_push_return_trace(parent, ip, &trace.depth, 0,
-				     NULL) == -EBUSY)
-		goto out;
-	parent = (unsigned long) return_to_handler;
+	if (!function_graph_enter(parent, ip, 0, NULL))
+		parent = (unsigned long) return_to_handler;
 out:
 	return parent;
 }
--- a/arch/s390/kernel/perf_cpum_cf.c
+++ b/arch/s390/kernel/perf_cpum_cf.c
@ -346,6 +346,8 @@ static int __hw_perf_event_init(struct perf_event *event)
 		break;

 	case PERF_TYPE_HARDWARE:
+		if (is_sampling_event(event))	/* No sampling support */
+			return -ENOENT;
 		ev = attr->config;
 		/* Count user space (problem-state) only */
 		if (!attr->exclude_user && attr->exclude_kernel) {
--- a/arch/s390/mm/pgalloc.c
+++ b/arch/s390/mm/pgalloc.c
@ -131,6 +131,7 @@ void crst_table_downgrade(struct mm_struct *mm)
 	}

 	pgd = mm->pgd;
+	mm_dec_nr_pmds(mm);
 	mm->pgd = (pgd_t *) (pgd_val(*pgd) & _REGION_ENTRY_ORIGIN);
 	mm->context.asce_limit = _REGION3_SIZE;
 	mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
--- a/arch/sh/kernel/ftrace.c
+++ b/arch/sh/kernel/ftrace.c
@ -321,8 +321,7 @@ int ftrace_disable_ftrace_graph_caller(void)
 void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 {
 	unsigned long old;
-	int faulted, err;
-	struct ftrace_graph_ent trace;
+	int faulted;
 	unsigned long return_hooker = (unsigned long)&return_to_handler;

 	if (unlikely(ftrace_graph_is_dead()))
@ -365,18 +364,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
 		return;
 	}

-	err = ftrace_push_return_trace(old, self_addr, &trace.depth, 0, NULL);
-	if (err == -EBUSY) {
+	if (function_graph_enter(old, self_addr, 0, NULL))
 		__raw_writel(old, parent);
-		return;
-	}
-
-	trace.func = self_addr;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace)) {
-		current->curr_ret_stack--;
-		__raw_writel(old, parent);
-	}
 }
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
--- a/arch/sparc/kernel/ftrace.c
+++ b/arch/sparc/kernel/ftrace.c
@ -126,20 +126,11 @@ unsigned long prepare_ftrace_return(unsigned long parent,
 				    unsigned long frame_pointer)
 {
 	unsigned long return_hooker = (unsigned long) &return_to_handler;
-	struct ftrace_graph_ent trace;

 	if (unlikely(atomic_read(&current->tracing_graph_pause)))
 		return parent + 8UL;

-	trace.func = self_addr;
-	trace.depth = current->curr_ret_stack + 1;
-
-	/* Only trace if the calling function expects to */
-	if (!ftrace_graph_entry(&trace))
-		return parent + 8UL;
-
-	if (ftrace_push_return_trace(parent, self_addr, &trace.depth,
-				     frame_pointer, NULL) == -EBUSY)
+	if (function_graph_enter(parent, self_addr, frame_pointer, NULL))
 		return parent + 8UL;

 	return return_hooker;
--- a/arch/sparc/kernel/iommu.c
+++ b/arch/sparc/kernel/iommu.c
@ -108,10 +108,9 @@ int iommu_table_init(struct iommu *iommu, int tsbsize,
 	/* Allocate and initialize the free area map.  */
 	sz = num_tsb_entries / 8;
 	sz = (sz + 7UL) & ~7UL;
-	iommu->tbl.map = kmalloc_node(sz, GFP_KERNEL, numa_node);
+	iommu->tbl.map = kzalloc_node(sz, GFP_KERNEL, numa_node);
 	if (!iommu->tbl.map)
 		return -ENOMEM;
-	memset(iommu->tbl.map, 0, sz);

 	iommu_tbl_pool_init(&iommu->tbl, num_tsb_entries, IO_PAGE_SHIFT,
 			    (tlb_type != hypervisor ? iommu_flushall : NULL),
--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@ -683,6 +683,7 @@ void do_signal32(struct pt_regs * regs)
 				regs->tpc -= 4;
 				regs->tnpc -= 4;
 				pt_regs_clear_syscall(regs);
+				/* fall through */
 			case ERESTART_RESTARTBLOCK:
 				regs->u_regs[UREG_G1] = __NR_restart_syscall;
 				regs->tpc -= 4;
--- a/arch/sparc/kernel/signal_32.c
+++ b/arch/sparc/kernel/signal_32.c
@ -508,6 +508,7 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 				regs->pc -= 4;
 				regs->npc -= 4;
 				pt_regs_clear_syscall(regs);
+				/* fall through */
 			case ERESTART_RESTARTBLOCK:
 				regs->u_regs[UREG_G1] = __NR_restart_syscall;
 				regs->pc -= 4;
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@ -533,6 +533,7 @@ static void do_signal(struct pt_regs *regs, unsigned long orig_i0)
 				regs->tpc -= 4;
 				regs->tnpc -= 4;
 				pt_regs_clear_syscall(regs);
+				/* fall through */
 			case ERESTART_RESTARTBLOCK:
 				regs->u_regs[UREG_G1] = __NR_restart_syscall;
 				regs->tpc -= 4;
--- a/arch/sparc/net/bpf_jit_comp_64.c
+++ b/arch/sparc/net/bpf_jit_comp_64.c
@ -791,7 +791,7 @@ static int emit_compare_and_branch(const u8 code, const u8 dst, u8 src,
 }

 /* Just skip the save instruction and the ctx register move.  */
-#define BPF_TAILCALL_PROLOGUE_SKIP	16
+#define BPF_TAILCALL_PROLOGUE_SKIP	32
 #define BPF_TAILCALL_CNT_SP_OFF		(STACK_BIAS + 128)

 static void build_prologue(struct jit_ctx *ctx)
@ -824,9 +824,15 @@ static void build_prologue(struct jit_ctx *ctx)
 		const u8 vfp = bpf2sparc[BPF_REG_FP];

 		emit(ADD | IMMED | RS1(FP) | S13(STACK_BIAS) | RD(vfp), ctx);
+	} else {
+		emit_nop(ctx);
 	}

 	emit_reg_move(I0, O0, ctx);
+	emit_reg_move(I1, O1, ctx);
+	emit_reg_move(I2, O2, ctx);
+	emit_reg_move(I3, O3, ctx);
+	emit_reg_move(I4, O4, ctx);
 	/* If you add anything here, adjust BPF_TAILCALL_PROLOGUE_SKIP above. */
 }

@ -1270,6 +1276,9 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 		const u8 tmp2 = bpf2sparc[TMP_REG_2];
 		u32 opcode = 0, rs2;

+		if (insn->dst_reg == BPF_REG_FP)
+			ctx->saw_frame_pointer = true;
+
 		ctx->tmp_2_used = true;
 		emit_loadimm(imm, tmp2, ctx);

@ -1308,6 +1317,9 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 		const u8 tmp = bpf2sparc[TMP_REG_1];
 		u32 opcode = 0, rs2;

+		if (insn->dst_reg == BPF_REG_FP)
+			ctx->saw_frame_pointer = true;
+
 		switch (BPF_SIZE(code)) {
 		case BPF_W:
 			opcode = ST32;
@ -1340,6 +1352,9 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 		const u8 tmp2 = bpf2sparc[TMP_REG_2];
 		const u8 tmp3 = bpf2sparc[TMP_REG_3];

+		if (insn->dst_reg == BPF_REG_FP)
+			ctx->saw_frame_pointer = true;
+
 		ctx->tmp_1_used = true;
 		ctx->tmp_2_used = true;
 		ctx->tmp_3_used = true;
@ -1360,6 +1375,9 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
 		const u8 tmp2 = bpf2sparc[TMP_REG_2];
 		const u8 tmp3 = bpf2sparc[TMP_REG_3];

+		if (insn->dst_reg == BPF_REG_FP)
+			ctx->saw_frame_pointer = true;
+
 		ctx->tmp_1_used = true;
 		ctx->tmp_2_used = true;
 		ctx->tmp_3_used = true;
@ -1425,12 +1443,12 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 	struct bpf_prog *tmp, *orig_prog = prog;
 	struct sparc64_jit_data *jit_data;
 	struct bpf_binary_header *header;
+	u32 prev_image_size, image_size;
 	bool tmp_blinded = false;
 	bool extra_pass = false;
 	struct jit_ctx ctx;
-	u32 image_size;
 	u8 *image_ptr;
-	int pass;
+	int pass, i;

 	if (!prog->jit_requested)
 		return orig_prog;
@ -1461,27 +1479,52 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 		header = jit_data->header;
 		extra_pass = true;
 		image_size = sizeof(u32) * ctx.idx;
+		prev_image_size = image_size;
+		pass = 1;
 		goto skip_init_ctx;
 	}

 	memset(&ctx, 0, sizeof(ctx));
 	ctx.prog = prog;

-	ctx.offset = kcalloc(prog->len, sizeof(unsigned int), GFP_KERNEL);
+	ctx.offset = kmalloc_array(prog->len, sizeof(unsigned int), GFP_KERNEL);
 	if (ctx.offset == NULL) {
 		prog = orig_prog;
 		goto out_off;
 	}

-	/* Fake pass to detect features used, and get an accurate assessment
-	 * of what the final image size will be.
+	/* Longest sequence emitted is for bswap32, 12 instructions.  Pre-cook
+	 * the offset array so that we converge faster.
 	 */
-	if (build_body(&ctx)) {
-		prog = orig_prog;
-		goto out_off;
+	for (i = 0; i < prog->len; i++)
+		ctx.offset[i] = i * (12 * 4);
+
+	prev_image_size = ~0U;
+	for (pass = 1; pass < 40; pass++) {
+		ctx.idx = 0;
+
+		build_prologue(&ctx);
+		if (build_body(&ctx)) {
+			prog = orig_prog;
+			goto out_off;
+		}
+		build_epilogue(&ctx);
+
+		if (bpf_jit_enable > 1)
+			pr_info("Pass %d: size = %u, seen = [%c%c%c%c%c%c]\n", pass,
+				ctx.idx * 4,
+				ctx.tmp_1_used ? '1' : ' ',
+				ctx.tmp_2_used ? '2' : ' ',
+				ctx.tmp_3_used ? '3' : ' ',
+				ctx.saw_frame_pointer ? 'F' : ' ',
+				ctx.saw_call ? 'C' : ' ',
+				ctx.saw_tail_call ? 'T' : ' ');
+
+		if (ctx.idx * 4 == prev_image_size)
+			break;
+		prev_image_size = ctx.idx * 4;
+		cond_resched();
 	}
-	build_prologue(&ctx);
-	build_epilogue(&ctx);

 	/* Now we know the actual image size. */
 	image_size = sizeof(u32) * ctx.idx;
@ -1494,28 +1537,24 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)

 	ctx.image = (u32 *)image_ptr;
 skip_init_ctx:
-	for (pass = 1; pass < 3; pass++) {
-		ctx.idx = 0;
+	ctx.idx = 0;

-		build_prologue(&ctx);
+	build_prologue(&ctx);

-		if (build_body(&ctx)) {
-			bpf_jit_binary_free(header);
-			prog = orig_prog;
-			goto out_off;
-		}
+	if (build_body(&ctx)) {
+		bpf_jit_binary_free(header);
+		prog = orig_prog;
+		goto out_off;
+	}

-		build_epilogue(&ctx);
+	build_epilogue(&ctx);

-		if (bpf_jit_enable > 1)
-			pr_info("Pass %d: shrink = %d, seen = [%c%c%c%c%c%c]\n", pass,
-				image_size - (ctx.idx * 4),
-				ctx.tmp_1_used ? '1' : ' ',
-				ctx.tmp_2_used ? '2' : ' ',
-				ctx.tmp_3_used ? '3' : ' ',
-				ctx.saw_frame_pointer ? 'F' : ' ',
-				ctx.saw_call ? 'C' : ' ',
-				ctx.saw_tail_call ? 'T' : ' ');
+	if (ctx.idx * 4 != prev_image_size) {
+		pr_err("bpf_jit: Failed to converge, prev_size=%u size=%d\n",
+		       prev_image_size, ctx.idx * 4);
+		bpf_jit_binary_free(header);
+		prog = orig_prog;
+		goto out_off;
 	}

 	if (bpf_jit_enable > 1)
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@ -444,10 +444,6 @@ config RETPOLINE
 	  branches. Requires a compiler with -mindirect-branch=thunk-extern
 	  support for full protection. The kernel may run slower.

-	  Without compiler support, at least indirect branches in assembler
-	  code are eliminated. Since this includes the syscall entry path,
-	  it is not entirely pointless.
-
 config INTEL_RDT
 	bool "Intel Resource Director Technology support"
 	depends on X86 && CPU_SUP_INTEL
@ -1004,13 +1000,7 @@ config NR_CPUS
 	  to the kernel image.

 config SCHED_SMT
-	bool "SMT (Hyperthreading) scheduler support"
-	depends on SMP
-	---help---
-	  SMT scheduler support improves the CPU scheduler's decision making
-	  when dealing with Intel Pentium 4 chips with HyperThreading at a
-	  cost of slightly increased overhead in some places. If unsure say
-	  N here.
+	def_bool y if SMP

 config SCHED_MC
 	def_bool y
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@ -220,9 +220,7 @@ KBUILD_CFLAGS += -fno-asynchronous-unwind-tables

 # Avoid indirect branches in kernel to deal with Spectre
 ifdef CONFIG_RETPOLINE
-ifneq ($(RETPOLINE_CFLAGS),)
-  KBUILD_CFLAGS += $(RETPOLINE_CFLAGS) -DRETPOLINE
-endif
+  KBUILD_CFLAGS += $(RETPOLINE_CFLAGS)
 endif

 archscripts: scripts_basic
@ -306,6 +304,13 @@ ifndef CC_HAVE_ASM_GOTO
 	@echo Compiler lacks asm-goto support.
 	@exit 1
 endif
+ifdef CONFIG_RETPOLINE
+ifeq ($(RETPOLINE_CFLAGS),)
+	@echo "You are building kernel with non-retpoline compiler." >&2
+	@echo "Please update your compiler." >&2
+	@false
+endif
+endif

 archclean:
 	$(Q)rm -rf $(objtree)/arch/i386
--- a/Show More
+++ b/Show More