redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

[TG3]: Add TG3_FLG2_IS_NIC flag. 

Add Tg3_FLG2_IS_NIC flag to unambiguously determine whether the
device is NIC or onboard.  Previously, the EEPROM_WRITE_PROT flag was
overloaded to also mean onboard.  With the separation, we can
support some devices that are onboard but do not use eeprom write
protect.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hifive-unleashed-5.1
Michael Chan 2006-12-07 00:21:14 -08:00 committed by David S. Miller
parent 676917d488
commit 9d26e21342
3 changed files with 27 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

37
drivers/net/tg3.c
View File

@ -1062,7 +1062,7 @@ static void tg3_frob_aux_power(struct tg3 *tp)
{
struct tg3 *tp_peer = tp;
if ((tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) != 0)
if ((tp->tg3_flags2 & TG3_FLG2_IS_NIC) == 0)
return;
if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5704) ||
@ -1213,8 +1213,8 @@ static int tg3_set_power_state(struct tg3 *tp, pci_power_t state)
power_control);
udelay(100); /* Delay after power state change */
/* Switch out of Vaux if it is not a LOM */
if (!(tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT))
/* Switch out of Vaux if it is a NIC */
if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
tw32_wait_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl, 100);
return 0;
@ -6397,16 +6397,17 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
udelay(40);
/* tp->grc_local_ctrl is partially set up during tg3_get_invariants().
* If TG3_FLAG_EEPROM_WRITE_PROT is set, we should read the
* If TG3_FLG2_IS_NIC is zero, we should read the
* register to preserve the GPIO settings for LOMs. The GPIOs,
* whether used as inputs or outputs, are set by boot code after
* reset.
*/
if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) {
if (!(tp->tg3_flags2 & TG3_FLG2_IS_NIC)) {
u32 gpio_mask;
gpio_mask = GRC_LCLCTRL_GPIO_OE0 | GRC_LCLCTRL_GPIO_OE2 |
GRC_LCLCTRL_GPIO_OUTPUT0 | GRC_LCLCTRL_GPIO_OUTPUT2;
gpio_mask = GRC_LCLCTRL_GPIO_OE0 | GRC_LCLCTRL_GPIO_OE1 |
GRC_LCLCTRL_GPIO_OE2 | GRC_LCLCTRL_GPIO_OUTPUT0 |
GRC_LCLCTRL_GPIO_OUTPUT1 | GRC_LCLCTRL_GPIO_OUTPUT2;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5752)
gpio_mask |= GRC_LCLCTRL_GPIO_OE3 |
@ -6418,8 +6419,9 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
tp->grc_local_ctrl |= tr32(GRC_LOCAL_CTRL) & gpio_mask;
/* GPIO1 must be driven high for eeprom write protect */
tp->grc_local_ctrl |= (GRC_LCLCTRL_GPIO_OE1 |
GRC_LCLCTRL_GPIO_OUTPUT1);
if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT)
tp->grc_local_ctrl |= (GRC_LCLCTRL_GPIO_OE1 |
GRC_LCLCTRL_GPIO_OUTPUT1);
}
tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
udelay(100);
@ -9963,8 +9965,10 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
if (!(tr32(PCIE_TRANSACTION_CFG) & PCIE_TRANS_CFG_LOM))
if (!(tr32(PCIE_TRANSACTION_CFG) & PCIE_TRANS_CFG_LOM)) {
tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT;
tp->tg3_flags2 |= TG3_FLG2_IS_NIC;
}
return;
}
@ -10064,10 +10068,17 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
tp->pdev->subsystem_vendor == PCI_VENDOR_ID_DELL)
tp->led_ctrl = LED_CTRL_MODE_PHY_2;
if (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP)
if (nic_cfg & NIC_SRAM_DATA_CFG_EEPROM_WP) {
tp->tg3_flags |= TG3_FLAG_EEPROM_WRITE_PROT;
else
if ((tp->pdev->subsystem_vendor ==
PCI_VENDOR_ID_ARIMA) &&
(tp->pdev->subsystem_device == 0x205a ||
tp->pdev->subsystem_device == 0x2063))
tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT;
} else {
tp->tg3_flags &= ~TG3_FLAG_EEPROM_WRITE_PROT;
tp->tg3_flags2 |= TG3_FLG2_IS_NIC;
}
if (nic_cfg & NIC_SRAM_DATA_CFG_ASF_ENABLE) {
tp->tg3_flags |= TG3_FLAG_ENABLE_ASF;
@ -10693,7 +10704,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG;
/* Get eeprom hw config before calling tg3_set_power_state().
* In particular, the TG3_FLAG_EEPROM_WRITE_PROT flag must be
* In particular, the TG3_FLG2_IS_NIC flag must be
* determined before calling tg3_set_power_state() so that
* we know whether or not to switch out of Vaux power.
* When the flag is set, it means that GPIO1 is used for eeprom

1
drivers/net/tg3.h
View File

@ -2233,6 +2233,7 @@ struct tg3 {
#define TG3_FLG2_PCI_EXPRESS 0x00000200
#define TG3_FLG2_ASF_NEW_HANDSHAKE 0x00000400
#define TG3_FLG2_HW_AUTONEG 0x00000800
#define TG3_FLG2_IS_NIC 0x00001000
#define TG3_FLG2_PHY_SERDES 0x00002000
#define TG3_FLG2_CAPACITIVE_COUPLING 0x00004000
#define TG3_FLG2_FLASH 0x00008000

2
include/linux/pci_ids.h
View File

@ -2003,6 +2003,8 @@
#define PCI_DEVICE_ID_FARSITE_TE1 0x1610
#define PCI_DEVICE_ID_FARSITE_TE1C 0x1612
#define PCI_VENDOR_ID_ARIMA 0x161f
#define PCI_VENDOR_ID_SIBYTE 0x166d
#define PCI_DEVICE_ID_BCM1250_PCI 0x0001
#define PCI_DEVICE_ID_BCM1250_HT 0x0002