redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

g_ncr5380: Remove CONFIG_SCSI_GENERIC_NCR53C400 

This change brings a number of improvements: fewer macros, better test
coverage, simpler code and sane Kconfig options. The downside is a small
chance of incompatibility (which seems unavoidable).

CONFIG_SCSI_GENERIC_NCR53C400 exists to enable or inhibit pseudo DMA
transfers when the driver is used with 53C400-compatible cards. Thanks to
Ondrej Zary's patches, PDMA now works which means it can be enabled
unconditionally.

Due to bad design, CONFIG_SCSI_GENERIC_NCR53C400 ties together unrelated
functionality as it sets both PSEUDO_DMA and BIOSPARAM macros. This patch
effectively enables PSEUDO_DMA and disables BIOSPARAM.

The defconfigs and the Kconfig default leave CONFIG_SCSI_GENERIC_NCR53C400
undefined. Red Hat 9 and CentOS 2.1 were the same. This leaves both
PSEUDO_DMA and BIOSPARAM disabled. The effect of this patch should be
better performance from enabling PSEUDO_DMA.

On the other hand, Debian 4 and SLES 10 had CONFIG_SCSI_GENERIC_NCR53C400
enabled, so both PSEUDO_DMA and BIOSPARAM were enabled. This patch might
affect configurations like this by disabling BIOSPARAM. My best guess is
that this could be a problem only in the vanishingly rare case that
1) the CHS values stored in the boot device partition table are wrong and
2) a 5380 card is in use (because PDMA on 53C400 used to be broken).

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
hifive-unleashed-5.1
Finn Thain 2016-03-23 21:10:10 +11:00 committed by Martin K. Petersen
parent e1f0bce3a0
commit 9d376402c8
3 changed files with 25 additions and 77 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
drivers/scsi/Kconfig
View File

@ -813,17 +813,6 @@ config SCSI_GENERIC_NCR5380_MMIO
To compile this driver as a module, choose M here: the
module will be called g_NCR5380_mmio.
config SCSI_GENERIC_NCR53C400
bool "Enable NCR53c400 extensions"
depends on SCSI_GENERIC_NCR5380
help
This enables certain optimizations for the NCR53c400 SCSI cards.
You might as well try it out. Note that this driver will only probe
for the Trantor T130B in its default configuration; you might have
to pass a command line option to the kernel at boot time if it does
not detect your card. See the file
<file:Documentation/scsi/g_NCR5380.txt> for details.
config SCSI_IPS
tristate "IBM ServeRAID support"
depends on PCI && SCSI

75
drivers/scsi/g_NCR5380.c
View File

@ -57,10 +57,7 @@
*/
#define AUTOPROBE_IRQ
#ifdef CONFIG_SCSI_GENERIC_NCR53C400
#define PSEUDO_DMA
#endif
#include <asm/io.h>
#include <linux/blkdev.h>
@ -270,7 +267,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
#ifndef SCSI_G_NCR5380_MEM
int i;
int port_idx = -1;
unsigned long region_size = 16;
unsigned long region_size;
#endif
static unsigned int __initdata ncr_53c400a_ports[] = {
0x280, 0x290, 0x300, 0x310, 0x330, 0x340, 0x348, 0x350, 0
@ -290,6 +287,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
#ifdef SCSI_G_NCR5380_MEM
unsigned long base;
void __iomem *iomem;
resource_size_t iomem_size;
#endif
if (ncr_irq)
@ -353,9 +351,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
flags = FLAG_NO_PSEUDO_DMA;
break;
case BOARD_NCR53C400:
#ifdef PSEUDO_DMA
flags = FLAG_NO_DMA_FIXUP;
#endif
break;
case BOARD_NCR53C400A:
flags = FLAG_NO_DMA_FIXUP;
@ -381,20 +377,22 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
/* Disable the adapter and look for a free io port */
magic_configure(-1, 0, magic);
region_size = 16;
if (overrides[current_override].NCR5380_map_name != PORT_AUTO)
for (i = 0; ports[i]; i++) {
if (!request_region(ports[i], 16, "ncr53c80"))
if (!request_region(ports[i], region_size, "ncr53c80"))
continue;
if (overrides[current_override].NCR5380_map_name == ports[i])
break;
release_region(ports[i], 16);
release_region(ports[i], region_size);
} else
for (i = 0; ports[i]; i++) {
if (!request_region(ports[i], 16, "ncr53c80"))
if (!request_region(ports[i], region_size, "ncr53c80"))
continue;
if (inb(ports[i]) == 0xff)
break;
release_region(ports[i], 16);
release_region(ports[i], region_size);
}
if (ports[i]) {
/* At this point we have our region reserved */
@ -410,17 +408,19 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
else
{
/* Not a 53C400A style setup - just grab */
if(!(request_region(overrides[current_override].NCR5380_map_name, NCR5380_region_size, "ncr5380")))
region_size = 8;
if (!request_region(overrides[current_override].NCR5380_map_name,
region_size, "ncr5380"))
continue;
region_size = NCR5380_region_size;
}
#else
base = overrides[current_override].NCR5380_map_name;
if (!request_mem_region(base, NCR5380_region_size, "ncr5380"))
iomem_size = NCR53C400_region_size;
if (!request_mem_region(base, iomem_size, "ncr5380"))
continue;
iomem = ioremap(base, NCR5380_region_size);
iomem = ioremap(base, iomem_size);
if (!iomem) {
release_mem_region(base, NCR5380_region_size);
release_mem_region(base, iomem_size);
continue;
}
#endif
@ -458,6 +458,7 @@ static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
#else
instance->base = overrides[current_override].NCR5380_map_name;
hostdata->iomem = iomem;
hostdata->iomem_size = iomem_size;
switch (overrides[current_override].board) {
case BOARD_NCR53C400:
hostdata->c400_ctl_status = 0x100;
@ -524,7 +525,7 @@ out_release:
release_region(overrides[current_override].NCR5380_map_name, region_size);
#else
iounmap(iomem);
release_mem_region(base, NCR5380_region_size);
release_mem_region(base, iomem_size);
#endif
return count;
}
@ -546,43 +547,16 @@ static int generic_NCR5380_release_resources(struct Scsi_Host *instance)
#ifndef SCSI_G_NCR5380_MEM
release_region(instance->io_port, instance->n_io_port);
#else
iounmap(((struct NCR5380_hostdata *)instance->hostdata)->iomem);
release_mem_region(instance->base, NCR5380_region_size);
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
iounmap(hostdata->iomem);
release_mem_region(instance->base, hostdata->iomem_size);
}
#endif
return 0;
}
#ifdef BIOSPARAM
/**
* generic_NCR5380_biosparam
* @disk: disk to compute geometry for
* @dev: device identifier for this disk
* @ip: sizes to fill in
*
* Generates a BIOS / DOS compatible H-C-S mapping for the specified
* device / size.
*
* XXX Most SCSI boards use this mapping, I could be incorrect. Someone
* using hard disks on a trantor should verify that this mapping
* corresponds to that used by the BIOS / ASPI driver by running the linux
* fdisk program and matching the H_C_S coordinates to what DOS uses.
*
* Locks: none
*/
static int
generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev,
sector_t capacity, int *ip)
{
ip[0] = 64;
ip[1] = 32;
ip[2] = capacity >> 11;
return 0;
}
#endif
#ifdef PSEUDO_DMA
/**
* NCR5380_pread - pseudo DMA read
* @instance: adapter to read from
@ -756,8 +730,6 @@ static int generic_NCR5380_dma_xfer_len(struct scsi_cmnd *cmd)
return transfersize;
}
#endif /* PSEUDO_DMA */
/*
* Include the NCR5380 core code that we build our driver around
*/
@ -773,7 +745,6 @@ static struct scsi_host_template driver_template = {
.queuecommand = generic_NCR5380_queue_command,
.eh_abort_handler = generic_NCR5380_abort,
.eh_bus_reset_handler = generic_NCR5380_bus_reset,
.bios_param = NCR5380_BIOSPARAM,
.can_queue = 16,
.this_id = 7,
.sg_tablesize = SG_ALL,

16
drivers/scsi/g_NCR5380.h
View File

@ -14,13 +14,6 @@
#ifndef GENERIC_NCR5380_H
#define GENERIC_NCR5380_H
#ifdef CONFIG_SCSI_GENERIC_NCR53C400
#define BIOSPARAM
#define NCR5380_BIOSPARAM generic_NCR5380_biosparam
#else
#define NCR5380_BIOSPARAM NULL
#endif
#define __STRVAL(x) #x
#define STRVAL(x) __STRVAL(x)
@ -30,12 +23,6 @@
#define NCR5380_map_type int
#define NCR5380_map_name port
#ifdef CONFIG_SCSI_GENERIC_NCR53C400
#define NCR5380_region_size 16
#else
#define NCR5380_region_size 8
#endif
#define NCR5380_read(reg) \
inb(instance->io_port + (reg))
#define NCR5380_write(reg, value) \
@ -55,7 +42,7 @@
#define NCR5380_map_name base
#define NCR53C400_mem_base 0x3880
#define NCR53C400_host_buffer 0x3900
#define NCR5380_region_size 0x3a00
#define NCR53C400_region_size 0x3a00
#define NCR5380_read(reg) \
readb(((struct NCR5380_hostdata *)shost_priv(instance))->iomem + \
@ -66,6 +53,7 @@
#define NCR5380_implementation_fields \
void __iomem *iomem; \
resource_size_t iomem_size; \
int c400_ctl_status; \
int c400_blk_cnt; \
int c400_host_buf;