From 9d7e2f25a0fde3e216a97e90b6556adf0d7d3eca Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 15 Dec 2019 16:39:05 +0000 Subject: [PATCH] i2c: fix bus recovery stop mode timing commit cf8ce8b80f8bf9669f6ec4e71e16668430febdac upstream. The I2C specification states that tsu:sto for standard mode timing must be at minimum 4us. Pictographically, this is: SCL: ____/~~~~~~~~~ SDA: _________/~~~~ ->| |<- 4us minimum We are currently waiting 2.5us between asserting SCL and SDA, which is in violation of the standard. Adjust the timings to ensure that we meet what is stipulated as the minimum timings to ensure that all devices correctly interpret the STOP bus transition. This is more important than trying to generate a square wave with even duty cycle. Signed-off-by: Russell King Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/i2c-core-base.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index 5f6a4985f2bc..810a942eaa8e 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -186,10 +186,11 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap) * If we can set SDA, we will always create a STOP to ensure additional * pulses will do no harm. This is achieved by letting SDA follow SCL * half a cycle later. Check the 'incomplete_write_byte' fault injector - * for details. + * for details. Note that we must honour tsu:sto, 4us, but lets use 5us + * here for simplicity. */ bri->set_scl(adap, scl); - ndelay(RECOVERY_NDELAY / 2); + ndelay(RECOVERY_NDELAY); if (bri->set_sda) bri->set_sda(adap, scl); ndelay(RECOVERY_NDELAY / 2); @@ -211,7 +212,13 @@ int i2c_generic_scl_recovery(struct i2c_adapter *adap) scl = !scl; bri->set_scl(adap, scl); /* Creating STOP again, see above */ - ndelay(RECOVERY_NDELAY / 2); + if (scl) { + /* Honour minimum tsu:sto */ + ndelay(RECOVERY_NDELAY); + } else { + /* Honour minimum tf and thd:dat */ + ndelay(RECOVERY_NDELAY / 2); + } if (bri->set_sda) bri->set_sda(adap, scl); ndelay(RECOVERY_NDELAY / 2);