DA830: fix SPI1 base address

Commit 54ce6883d2 (davinci: da8xx: add spi
resources and registration routine) wrongly assumed that SPI1 is mapped at
the same address on DA830/OMAP-L137 and DA850/OMAP-L138; actually, the base
address was valid only for the latter SoC. Teach the code to pass the correct
SPI1 memory resource for both SoCs...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This commit is contained in:
Sergei Shtylyov 2011-04-06 17:17:21 +00:00 committed by Sekhar Nori
parent 336f402790
commit 9e7d24f622

View file

@ -39,7 +39,8 @@
#define DA8XX_GPIO_BASE 0x01e26000
#define DA8XX_I2C1_BASE 0x01e28000
#define DA8XX_SPI0_BASE 0x01c41000
#define DA8XX_SPI1_BASE 0x01f0e000
#define DA830_SPI1_BASE 0x01e12000
#define DA850_SPI1_BASE 0x01f0e000
#define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000
#define DA8XX_EMAC_MOD_REG_OFFSET 0x2000
@ -762,8 +763,8 @@ static struct resource da8xx_spi0_resources[] = {
static struct resource da8xx_spi1_resources[] = {
[0] = {
.start = DA8XX_SPI1_BASE,
.end = DA8XX_SPI1_BASE + SZ_4K - 1,
.start = DA830_SPI1_BASE,
.end = DA830_SPI1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@ -832,5 +833,10 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info,
da8xx_spi_pdata[instance].num_chipselect = len;
if (instance == 1 && cpu_is_davinci_da850()) {
da8xx_spi1_resources[0].start = DA850_SPI1_BASE;
da8xx_spi1_resources[0].end = DA850_SPI1_BASE + SZ_4K - 1;
}
return platform_device_register(&da8xx_spi_device[instance]);
}