redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity

ALSA: bebob: Send a cue to load firmware for M-Audio Firewire series 

Just powering on, these devices below wait to download firmware.
 - Firewire Audiophile
 - Firewire 410
 - Firewire 1814
 - ProjectMix I/O

But firmware version 5058 or later, flash memory in the device stores the
firmware. So this driver can enable these devices by sending a certain cue to
load the firmware.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
hifive-unleashed-5.1
Takashi Sakamoto 2014-04-25 22:45:29 +09:00 committed by Takashi Iwai
parent c495a4a36e
commit a2b2a7798f
3 changed files with 79 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
sound/firewire/bebob/bebob.c
View File

@ -177,18 +177,21 @@ bebob_probe(struct fw_unit *unit,
}
if ((entry->vendor_id == VEN_FOCUSRITE) &&
(entry->model_id == MODEL_FOCUSRITE_SAFFIRE_BOTH)) {
(entry->model_id == MODEL_FOCUSRITE_SAFFIRE_BOTH))
spec = get_saffire_spec(unit);
} else if ((entry->vendor_id == VEN_MAUDIO1) &&
(entry->model_id == MODEL_MAUDIO_AUDIOPHILE_BOTH) &&
!check_audiophile_booted(unit)) {
err = 0;
goto end;
} else {
else if ((entry->vendor_id == VEN_MAUDIO1) &&
(entry->model_id == MODEL_MAUDIO_AUDIOPHILE_BOTH) &&
!check_audiophile_booted(unit))
spec = NULL;
else
spec = (const struct snd_bebob_spec *)entry->driver_data;
}
if (spec == NULL) {
err = -ENOSYS;
if ((entry->vendor_id == VEN_MAUDIO1) ||
(entry->vendor_id == VEN_MAUDIO2))
err = snd_bebob_maudio_load_firmware(unit);
else
err = -ENOSYS;
goto end;
}
@ -374,6 +377,7 @@ static const struct ieee1394_device_id bebob_id_table[] = {
SND_BEBOB_DEV_ENTRY(VEN_FOCUSRITE, MODEL_FOCUSRITE_SAFFIRE_BOTH,
&saffire_spec),
/* M-Audio, Firewire 410 */
SND_BEBOB_DEV_ENTRY(VEN_MAUDIO2, 0x00010058, NULL), /* bootloader */
SND_BEBOB_DEV_ENTRY(VEN_MAUDIO2, 0x00010046, &maudio_fw410_spec),
/* M-Audio, Firewire Audiophile */
SND_BEBOB_DEV_ENTRY(VEN_MAUDIO1, MODEL_MAUDIO_AUDIOPHILE_BOTH,
@ -387,6 +391,7 @@ static const struct ieee1394_device_id bebob_id_table[] = {
/* M-Audio, ProFireLightbridge */
SND_BEBOB_DEV_ENTRY(VEN_MAUDIO1, 0x000100a1, &spec_normal),
/* Firewire 1814 */
SND_BEBOB_DEV_ENTRY(VEN_MAUDIO1, 0x00010070, NULL), /* bootloader */
SND_BEBOB_DEV_ENTRY(VEN_MAUDIO1, MODEL_MAUDIO_FW1814,
&maudio_special_spec),
/* M-Audio ProjectMix */

1
sound/firewire/bebob/bebob.h
View File

@ -242,6 +242,7 @@ extern struct snd_bebob_spec maudio_ozonic_spec;
extern struct snd_bebob_spec maudio_nrv10_spec;
extern struct snd_bebob_spec maudio_special_spec;
int snd_bebob_maudio_special_discover(struct snd_bebob *bebob, bool is1814);
int snd_bebob_maudio_load_firmware(struct fw_unit *unit);
#define SND_BEBOB_DEV_ENTRY(vendor, model, data) \
{ \

64
sound/firewire/bebob/bebob_maudio.c
View File

@ -16,6 +16,10 @@
* settings when completing uploading. Then these devices generate bus reset
* and are recognized as new devices with the firmware.
*
* But with firmware version 5058 or later, the firmware is stored to flash
* memory in the device and drivers can tell bootloader to load the firmware
* by sending a cue. This cue must be sent one time.
*
* For streaming, both of output and input streams are needed for Firewire 410
* and Ozonic. The single stream is OK for the other devices even if the clock
* source is not SYT-Match (I note no devices use SYT-Match).
@ -31,6 +35,20 @@
* functionality is between 0xffc700700000 to 0xffc70070009c.
*/
/* Offset from information register */
#define INFO_OFFSET_SW_DATE 0x20
/* Bootloader Protocol Version 1 */
#define MAUDIO_BOOTLOADER_CUE1 0x00000001
/*
* Initializing configuration to factory settings (= 0x1101), (swapped in line),
* Command code is zero (= 0x00),
* the number of operands is zero (= 0x00)(at least significant byte)
*/
#define MAUDIO_BOOTLOADER_CUE2 0x01110000
/* padding */
#define MAUDIO_BOOTLOADER_CUE3 0x00000000
#define MAUDIO_SPECIFIC_ADDRESS 0xffc700000000
#define METER_OFFSET 0x00600000
@ -67,6 +85,52 @@ struct special_params {
struct snd_ctl_elem_id *ctl_id_sync;
};
/*
* For some M-Audio devices, this module just send cue to load firmware. After
* loading, the device generates bus reset and newly detected.
*
* If we make any transactions to load firmware, the operation may failed.
*/
int snd_bebob_maudio_load_firmware(struct fw_unit *unit)
{
struct fw_device *device = fw_parent_device(unit);
int err, rcode;
u64 date;
__be32 cues[3] = {
MAUDIO_BOOTLOADER_CUE1,
MAUDIO_BOOTLOADER_CUE2,
MAUDIO_BOOTLOADER_CUE3
};
/* check date of software used to build */
err = snd_bebob_read_block(unit, INFO_OFFSET_SW_DATE,
&date, sizeof(u64));
if (err < 0)
goto end;
/*
* firmware version 5058 or later has date later than "20070401", but
* 'date' is not null-terminated.
*/
if (date < 0x3230303730343031) {
dev_err(&unit->device,
"Use firmware version 5058 or later\n");
err = -ENOSYS;
goto end;
}
rcode = fw_run_transaction(device->card, TCODE_WRITE_BLOCK_REQUEST,
device->node_id, device->generation,
device->max_speed, BEBOB_ADDR_REG_REQ,
cues, sizeof(cues));
if (rcode != RCODE_COMPLETE) {
dev_err(&unit->device,
"Failed to send a cue to load firmware\n");
err = -EIO;
}
end:
return err;
}
static inline int
get_meter(struct snd_bebob *bebob, void *buf, unsigned int size)
{