diff --git a/Documentation/watchdog/watchdog-parameters.rst b/Documentation/watchdog/watchdog-parameters.rst index a3985cc5aeda..226aba56f704 100644 --- a/Documentation/watchdog/watchdog-parameters.rst +++ b/Documentation/watchdog/watchdog-parameters.rst @@ -301,15 +301,6 @@ ixp4xx_wdt: ------------------------------------------------- -ks8695_wdt: - wdt_time: - Watchdog time in seconds. (default=5) - nowayout: - Watchdog cannot be stopped once started - (default=kernel config parameter) - -------------------------------------------------- - machzwd: nowayout: Watchdog cannot be stopped once started diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index a45f9e3e442b..7e45a7792ed5 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -477,13 +477,6 @@ config IXP4XX_WATCHDOG Say N if you are unsure. -config KS8695_WATCHDOG - tristate "KS8695 watchdog" - depends on ARCH_KS8695 - help - Watchdog timer embedded into KS8695 processor. This will reboot your - system when the timeout is reached. - config HAVE_S3C2410_WATCHDOG bool help diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 7caa920e7e60..85f55ec76f8d 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -49,7 +49,6 @@ obj-$(CONFIG_21285_WATCHDOG) += wdt285.o obj-$(CONFIG_977_WATCHDOG) += wdt977.o obj-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o -obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o obj-$(CONFIG_SAMA5D4_WATCHDOG) += sama5d4_wdt.o diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c deleted file mode 100644 index 1550ce3c5702..000000000000 --- a/drivers/watchdog/ks8695_wdt.c +++ /dev/null @@ -1,319 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Watchdog driver for Kendin/Micrel KS8695. - * - * (C) 2007 Andrew Victor - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define KS8695_TMR_OFFSET (0xF0000 + 0xE400) -#define KS8695_TMR_VA (KS8695_IO_VA + KS8695_TMR_OFFSET) - -/* - * Timer registers - */ -#define KS8695_TMCON (0x00) /* Timer Control Register */ -#define KS8695_T0TC (0x08) /* Timer 0 Timeout Count Register */ -#define TMCON_T0EN (1 << 0) /* Timer 0 Enable */ - -/* Timer0 Timeout Counter Register */ -#define T0TC_WATCHDOG (0xff) /* Enable watchdog mode */ - -#define WDT_DEFAULT_TIME 5 /* seconds */ -#define WDT_MAX_TIME 171 /* seconds */ - -static int wdt_time = WDT_DEFAULT_TIME; -static bool nowayout = WATCHDOG_NOWAYOUT; - -module_param(wdt_time, int, 0); -MODULE_PARM_DESC(wdt_time, "Watchdog time in seconds. (default=" - __MODULE_STRING(WDT_DEFAULT_TIME) ")"); - -#ifdef CONFIG_WATCHDOG_NOWAYOUT -module_param(nowayout, bool, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" - __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); -#endif - - -static unsigned long ks8695wdt_busy; -static DEFINE_SPINLOCK(ks8695_lock); - -/* ......................................................................... */ - -/* - * Disable the watchdog. - */ -static inline void ks8695_wdt_stop(void) -{ - unsigned long tmcon; - - spin_lock(&ks8695_lock); - /* disable timer0 */ - tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); - __raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); - spin_unlock(&ks8695_lock); -} - -/* - * Enable and reset the watchdog. - */ -static inline void ks8695_wdt_start(void) -{ - unsigned long tmcon; - unsigned long tval = wdt_time * KS8695_CLOCK_RATE; - - spin_lock(&ks8695_lock); - /* disable timer0 */ - tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); - __raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); - - /* program timer0 */ - __raw_writel(tval | T0TC_WATCHDOG, KS8695_TMR_VA + KS8695_T0TC); - - /* re-enable timer0 */ - tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); - __raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); - spin_unlock(&ks8695_lock); -} - -/* - * Reload the watchdog timer. (ie, pat the watchdog) - */ -static inline void ks8695_wdt_reload(void) -{ - unsigned long tmcon; - - spin_lock(&ks8695_lock); - /* disable, then re-enable timer0 */ - tmcon = __raw_readl(KS8695_TMR_VA + KS8695_TMCON); - __raw_writel(tmcon & ~TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); - __raw_writel(tmcon | TMCON_T0EN, KS8695_TMR_VA + KS8695_TMCON); - spin_unlock(&ks8695_lock); -} - -/* - * Change the watchdog time interval. - */ -static int ks8695_wdt_settimeout(int new_time) -{ - /* - * All counting occurs at KS8695_CLOCK_RATE / 128 = 0.256 Hz - * - * Since WDV is a 16-bit counter, the maximum period is - * 65536 / 0.256 = 256 seconds. - */ - if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) - return -EINVAL; - - /* Set new watchdog time. It will be used when - ks8695_wdt_start() is called. */ - wdt_time = new_time; - return 0; -} - -/* ......................................................................... */ - -/* - * Watchdog device is opened, and watchdog starts running. - */ -static int ks8695_wdt_open(struct inode *inode, struct file *file) -{ - if (test_and_set_bit(0, &ks8695wdt_busy)) - return -EBUSY; - - ks8695_wdt_start(); - return stream_open(inode, file); -} - -/* - * Close the watchdog device. - * If CONFIG_WATCHDOG_NOWAYOUT is NOT defined then the watchdog is also - * disabled. - */ -static int ks8695_wdt_close(struct inode *inode, struct file *file) -{ - /* Disable the watchdog when file is closed */ - if (!nowayout) - ks8695_wdt_stop(); - clear_bit(0, &ks8695wdt_busy); - return 0; -} - -static const struct watchdog_info ks8695_wdt_info = { - .identity = "ks8695 watchdog", - .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, -}; - -/* - * Handle commands from user-space. - */ -static long ks8695_wdt_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - void __user *argp = (void __user *)arg; - int __user *p = argp; - int new_value; - - switch (cmd) { - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &ks8695_wdt_info, - sizeof(ks8695_wdt_info)) ? -EFAULT : 0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - case WDIOC_SETOPTIONS: - if (get_user(new_value, p)) - return -EFAULT; - if (new_value & WDIOS_DISABLECARD) - ks8695_wdt_stop(); - if (new_value & WDIOS_ENABLECARD) - ks8695_wdt_start(); - return 0; - case WDIOC_KEEPALIVE: - ks8695_wdt_reload(); /* pat the watchdog */ - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_value, p)) - return -EFAULT; - if (ks8695_wdt_settimeout(new_value)) - return -EINVAL; - /* Enable new time value */ - ks8695_wdt_start(); - /* Return current value */ - return put_user(wdt_time, p); - case WDIOC_GETTIMEOUT: - return put_user(wdt_time, p); - default: - return -ENOTTY; - } -} - -/* - * Pat the watchdog whenever device is written to. - */ -static ssize_t ks8695_wdt_write(struct file *file, const char *data, - size_t len, loff_t *ppos) -{ - ks8695_wdt_reload(); /* pat the watchdog */ - return len; -} - -/* ......................................................................... */ - -static const struct file_operations ks8695wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .unlocked_ioctl = ks8695_wdt_ioctl, - .open = ks8695_wdt_open, - .release = ks8695_wdt_close, - .write = ks8695_wdt_write, -}; - -static struct miscdevice ks8695wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &ks8695wdt_fops, -}; - -static int ks8695wdt_probe(struct platform_device *pdev) -{ - int res; - - if (ks8695wdt_miscdev.parent) - return -EBUSY; - ks8695wdt_miscdev.parent = &pdev->dev; - - res = misc_register(&ks8695wdt_miscdev); - if (res) - return res; - - pr_info("KS8695 Watchdog Timer enabled (%d seconds%s)\n", - wdt_time, nowayout ? ", nowayout" : ""); - return 0; -} - -static int ks8695wdt_remove(struct platform_device *pdev) -{ - misc_deregister(&ks8695wdt_miscdev); - ks8695wdt_miscdev.parent = NULL; - - return 0; -} - -static void ks8695wdt_shutdown(struct platform_device *pdev) -{ - ks8695_wdt_stop(); -} - -#ifdef CONFIG_PM - -static int ks8695wdt_suspend(struct platform_device *pdev, pm_message_t message) -{ - ks8695_wdt_stop(); - return 0; -} - -static int ks8695wdt_resume(struct platform_device *pdev) -{ - if (ks8695wdt_busy) - ks8695_wdt_start(); - return 0; -} - -#else -#define ks8695wdt_suspend NULL -#define ks8695wdt_resume NULL -#endif - -static struct platform_driver ks8695wdt_driver = { - .probe = ks8695wdt_probe, - .remove = ks8695wdt_remove, - .shutdown = ks8695wdt_shutdown, - .suspend = ks8695wdt_suspend, - .resume = ks8695wdt_resume, - .driver = { - .name = "ks8695_wdt", - }, -}; - -static int __init ks8695_wdt_init(void) -{ - /* Check that the heartbeat value is within range; - if not reset to the default */ - if (ks8695_wdt_settimeout(wdt_time)) { - ks8695_wdt_settimeout(WDT_DEFAULT_TIME); - pr_info("ks8695_wdt: wdt_time value must be 1 <= wdt_time <= %i" - ", using %d\n", wdt_time, WDT_MAX_TIME); - } - return platform_driver_register(&ks8695wdt_driver); -} - -static void __exit ks8695_wdt_exit(void) -{ - platform_driver_unregister(&ks8695wdt_driver); -} - -module_init(ks8695_wdt_init); -module_exit(ks8695_wdt_exit); - -MODULE_AUTHOR("Andrew Victor"); -MODULE_DESCRIPTION("Watchdog driver for KS8695"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:ks8695_wdt");