From 167d52edc4991e81012ef571643d0307aa2bb916 Mon Sep 17 00:00:00 2001
From: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Date: Sun, 27 Aug 2017 15:07:47 -0700
Subject: [PATCH 01/15] i40e: Update state variable for adminq subtask

During NVM update, state machine gets into unrecoverable state because
i40e_clean_adminq_subtask can get scheduled after the admin queue
command but before other state variables are updated. This causes
incorrect input to i40e_nvmupd_check_wait_event and state transitions
don't happen.

This fix updates the state variables so that adminq_subtask will have
accurate information whenever it gets scheduled.

Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_nvm.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_nvm.c b/drivers/net/ethernet/intel/i40e/i40e_nvm.c
index 2cf7db2dc7cd..96afef98a08f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_nvm.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_nvm.c
@@ -755,7 +755,11 @@ i40e_status i40e_nvmupd_command(struct i40e_hw *hw,
 
 	/* Acquire lock to prevent race condition where adminq_task
 	 * can execute after i40e_nvmupd_nvm_read/write but before state
-	 * variables (nvm_wait_opcode, nvm_release_on_done) are updated
+	 * variables (nvm_wait_opcode, nvm_release_on_done) are updated.
+	 *
+	 * During NVMUpdate, it is observed that lock could be held for
+	 * ~5ms for most commands. However lock is held for ~60ms for
+	 * NVMUPD_CSUM_LCB command.
 	 */
 	mutex_lock(&hw->aq.arq_mutex);
 	switch (hw->nvmupd_state) {
@@ -778,7 +782,8 @@ i40e_status i40e_nvmupd_command(struct i40e_hw *hw,
 		 */
 		if (cmd->offset == 0xffff) {
 			i40e_nvmupd_check_wait_event(hw, hw->nvm_wait_opcode);
-			return 0;
+			status = 0;
+			goto exit;
 		}
 
 		status = I40E_ERR_NOT_READY;
@@ -793,6 +798,7 @@ i40e_status i40e_nvmupd_command(struct i40e_hw *hw,
 		*perrno = -ESRCH;
 		break;
 	}
+exit:
 	mutex_unlock(&hw->aq.arq_mutex);
 	return status;
 }

From ed601f660131be6bb9a8a109b0f2bf031786100f Mon Sep 17 00:00:00 2001
From: Mariusz Stachura <mariusz.stachura@intel.com>
Date: Wed, 12 Jul 2017 05:46:08 -0400
Subject: [PATCH 02/15] i40e: Store the requested FEC information

Store information about FEC modes, that were requested. It will be used
in printing link status information function and this way there is no
need to call admin queue there.

Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_common.c | 4 ++++
 drivers/net/ethernet/intel/i40e/i40e_type.h   | 1 +
 drivers/net/ethernet/intel/i40evf/i40e_type.h | 1 +
 3 files changed, 6 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index 8e082a946411..5c36a18a31be 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -2529,6 +2529,10 @@ i40e_status i40e_update_link_info(struct i40e_hw *hw)
 		if (status)
 			return status;
 
+		hw->phy.link_info.req_fec_info =
+			abilities.fec_cfg_curr_mod_ext_info &
+			(I40E_AQ_REQUEST_FEC_KR | I40E_AQ_REQUEST_FEC_RS);
+
 		memcpy(hw->phy.link_info.module_type, &abilities.module_type,
 		       sizeof(hw->phy.link_info.module_type));
 	}
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index 3a18ed13edc4..fd4bbdd88b57 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -185,6 +185,7 @@ struct i40e_link_status {
 	enum i40e_aq_link_speed link_speed;
 	u8 link_info;
 	u8 an_info;
+	u8 req_fec_info;
 	u8 fec_info;
 	u8 ext_info;
 	u8 loopback;
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_type.h b/drivers/net/ethernet/intel/i40evf/i40e_type.h
index bde7f24af1c6..2ea919d9cdcf 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_type.h
@@ -159,6 +159,7 @@ struct i40e_link_status {
 	enum i40e_aq_link_speed link_speed;
 	u8 link_info;
 	u8 an_info;
+	u8 req_fec_info;
 	u8 fec_info;
 	u8 ext_info;
 	u8 loopback;

From b5d5504aa1e961fc1f87ee7b092bf5ce1a7bf0de Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Wed, 12 Jul 2017 05:46:09 -0400
Subject: [PATCH 03/15] i40e: prevent snprintf format specifier truncation

Increase the size of the prefix buffer so that it can hold enough
characters for every possible input. Although 20 is enough for all
expected inputs, it is possible for the values to be larger than
expected, resulting in a possibly truncated string. Additionally, lets
use sizeof(prefix) in order to ensure we use the correct size if we need
to change the array length in the future.

New versions of GCC starting at 7 now include warnings to prevent
truncation unless you handle the return code. At most 27 bytes can be
written here, so lets just increase the buffer size even if for all
expected hw->bus.* values we only needed 20.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_common.c   | 4 ++--
 drivers/net/ethernet/intel/i40evf/i40e_common.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index 5c36a18a31be..111426ba5fbc 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -328,9 +328,9 @@ void i40e_debug_aq(struct i40e_hw *hw, enum i40e_debug_mask mask, void *desc,
 			len = buf_len;
 		/* write the full 16-byte chunks */
 		if (hw->debug_mask & mask) {
-			char prefix[20];
+			char prefix[27];
 
-			snprintf(prefix, 20,
+			snprintf(prefix, sizeof(prefix),
 				 "i40e %02x:%02x.%x: \t0x",
 				 hw->bus.bus_id,
 				 hw->bus.device,
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_common.c b/drivers/net/ethernet/intel/i40evf/i40e_common.c
index d69c2e44cd1a..8d3a2bfe186a 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_common.c
@@ -333,9 +333,9 @@ void i40evf_debug_aq(struct i40e_hw *hw, enum i40e_debug_mask mask, void *desc,
 			len = buf_len;
 		/* write the full 16-byte chunks */
 		if (hw->debug_mask & mask) {
-			char prefix[20];
+			char prefix[27];
 
-			snprintf(prefix, 20,
+			snprintf(prefix, sizeof(prefix),
 				 "i40evf %02x:%02x.%x: \t0x",
 				 hw->bus.bus_id,
 				 hw->bus.device,

From e53b382f3a207690fc0411a3b39fbd21d7470cfc Mon Sep 17 00:00:00 2001
From: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Date: Wed, 12 Jul 2017 05:46:10 -0400
Subject: [PATCH 04/15] i40e: Use correct flag to enable egress traffic for
 unicast promisc

Albeit, we usually set true promiscuous mode for both multicast and
unicast at the same time - however, it is possible to set it
individually, so using allmulti flag which is only for allmulticast might
caused unwanted behavior in mirroring egress traffic promiscuous for
unicast in VF.

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 057c77be96e4..27d87bef4ba3 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -1758,7 +1758,7 @@ static int i40e_vc_config_promiscuous_mode_msg(struct i40e_vf *vf,
 		}
 	} else {
 		aq_ret = i40e_aq_set_vsi_unicast_promiscuous(hw, vsi->seid,
-							     allmulti, NULL,
+							     alluni, NULL,
 							     true);
 		aq_err = pf->hw.aq.asq_last_status;
 		if (aq_ret) {

From 696ac80aa11fb80e641068123412cd397b460a0b Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Wed, 12 Jul 2017 05:46:11 -0400
Subject: [PATCH 05/15] i40evf: fix possible snprintf truncation of
 q_vector->name

The q_vector names are based on the interface name with a driver prefix,
the type of q_vector setup, and the queue number. We previously set the
size of this variable to IFNAMSIZ + 9, which is incorrect, because we
actually include a minimum of 14 characters extra beyond the interface
name size.

New versions of GCC since 7 include a new warning that detects this
possible truncation and complains. We can fix this by increasing the
size in case our interface name is too large to avoid truncation. We
don't need to go beyond 14 because the compiler is smart enough to
realize our values can never exceed size of 1. We do go up to 15 here
because possible future changes may increase the number of queues beyond
one digit.

While we are here, also change some variables to be unsigned (since they
are never negative) and stop using an extra unnecessary %s format
specifier.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40evf/i40evf.h    |  2 +-
 .../net/ethernet/intel/i40evf/i40evf_main.c   | 21 ++++++++-----------
 2 files changed, 10 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h
index d310544c6c6e..e5293d35fb6a 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf.h
+++ b/drivers/net/ethernet/intel/i40evf/i40evf.h
@@ -121,7 +121,7 @@ struct i40e_q_vector {
 #define ITR_COUNTDOWN_START 100
 	u8 itr_countdown;	/* when 0 or 1 update ITR */
 	int v_idx;	/* vector index in list */
-	char name[IFNAMSIZ + 9];
+	char name[IFNAMSIZ + 15];
 	bool arm_wb_state;
 	cpumask_t affinity_mask;
 	struct irq_affinity_notify affinity_notify;
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 0d87191b6bac..258e8e27068b 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -543,9 +543,9 @@ static void i40evf_irq_affinity_release(struct kref *ref) {}
 static int
 i40evf_request_traffic_irqs(struct i40evf_adapter *adapter, char *basename)
 {
-	int vector, err, q_vectors;
-	int rx_int_idx = 0, tx_int_idx = 0;
-	int irq_num;
+	unsigned int vector, q_vectors;
+	unsigned int rx_int_idx = 0, tx_int_idx = 0;
+	int irq_num, err;
 
 	i40evf_irq_disable(adapter);
 	/* Decrement for Other and TCP Timer vectors */
@@ -556,18 +556,15 @@ i40evf_request_traffic_irqs(struct i40evf_adapter *adapter, char *basename)
 		irq_num = adapter->msix_entries[vector + NONQ_VECS].vector;
 
 		if (q_vector->tx.ring && q_vector->rx.ring) {
-			snprintf(q_vector->name, sizeof(q_vector->name) - 1,
-				 "i40evf-%s-%s-%d", basename,
-				 "TxRx", rx_int_idx++);
+			snprintf(q_vector->name, sizeof(q_vector->name),
+				 "i40evf-%s-TxRx-%d", basename, rx_int_idx++);
 			tx_int_idx++;
 		} else if (q_vector->rx.ring) {
-			snprintf(q_vector->name, sizeof(q_vector->name) - 1,
-				 "i40evf-%s-%s-%d", basename,
-				 "rx", rx_int_idx++);
+			snprintf(q_vector->name, sizeof(q_vector->name),
+				 "i40evf-%s-rx-%d", basename, rx_int_idx++);
 		} else if (q_vector->tx.ring) {
-			snprintf(q_vector->name, sizeof(q_vector->name) - 1,
-				 "i40evf-%s-%s-%d", basename,
-				 "tx", tx_int_idx++);
+			snprintf(q_vector->name, sizeof(q_vector->name),
+				 "i40evf-%s-tx-%d", basename, tx_int_idx++);
 		} else {
 			/* skip this unused q_vector */
 			continue;

From 8c9eb350aa7b66ab06f3e378dab3c7875a0bf83a Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Wed, 12 Jul 2017 05:46:12 -0400
Subject: [PATCH 06/15] i40e: force VMDQ device name truncation

In new versions of GCC since 7.x a new warning exists which warns when
a string is truncated before all of the format can be completed.

When we setup VMDQ netdev names we are copying a pre-existing interface
name which could be up to 15 characters in length. Since we also add
4 bytes, v, the literal %, the d and a \0 null, we would overrun the
available size unless snprintf truncated for us.

The snprintf call will of course truncate on the end, so lets instead
modify the code to force truncation of the copied netdev name by
4 characters, to create enough space for the 4 bytes we're adding.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index b0ccd3c2eec6..3a6a752c6c58 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -9690,8 +9690,13 @@ static int i40e_config_netdev(struct i40e_vsi *vsi)
 		i40e_add_mac_filter(vsi, mac_addr);
 		spin_unlock_bh(&vsi->mac_filter_hash_lock);
 	} else {
-		/* relate the VSI_VMDQ name to the VSI_MAIN name */
-		snprintf(netdev->name, IFNAMSIZ, "%sv%%d",
+		/* Relate the VSI_VMDQ name to the VSI_MAIN name. Note that we
+		 * are still limited by IFNAMSIZ, but we're adding 'v%d\0' to
+		 * the end, which is 4 bytes long, so force truncation of the
+		 * original name by IFNAMSIZ - 4
+		 */
+		snprintf(netdev->name, IFNAMSIZ, "%.*sv%%d",
+			 IFNAMSIZ - 4,
 			 pf->vsi[pf->lan_vsi]->netdev->name);
 		random_ether_addr(mac_addr);
 

From 8774370d268f2f43d8487d230e0d4fa1647759b3 Mon Sep 17 00:00:00 2001
From: Mariusz Stachura <mariusz.stachura@intel.com>
Date: Mon, 17 Jul 2017 22:09:45 -0700
Subject: [PATCH 07/15] i40e/i40evf: support for VF VLAN tag stripping control

This patch gives VF capability to control VLAN tag stripping via
ethtool. As rx-vlan-offload was fixed before, now the VF is able to
change it using "ethtool --offload <IF> rxvlan on/off" settings.

Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 .../ethernet/intel/i40e/i40e_virtchnl_pf.c    | 60 +++++++++++++++++++
 drivers/net/ethernet/intel/i40evf/i40evf.h    |  4 ++
 .../net/ethernet/intel/i40evf/i40evf_main.c   | 33 ++++++++++
 .../ethernet/intel/i40evf/i40evf_virtchnl.c   | 40 +++++++++++++
 include/linux/avf/virtchnl.h                  |  5 ++
 5 files changed, 142 insertions(+)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index 27d87bef4ba3..4d1e670f490e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -2529,6 +2529,60 @@ err:
 	return i40e_vc_send_resp_to_vf(vf, VIRTCHNL_OP_SET_RSS_HENA, aq_ret);
 }
 
+/**
+ * i40e_vc_enable_vlan_stripping
+ * @vf: pointer to the VF info
+ * @msg: pointer to the msg buffer
+ * @msglen: msg length
+ *
+ * Enable vlan header stripping for the VF
+ **/
+static int i40e_vc_enable_vlan_stripping(struct i40e_vf *vf, u8 *msg,
+					 u16 msglen)
+{
+	struct i40e_vsi *vsi = vf->pf->vsi[vf->lan_vsi_idx];
+	i40e_status aq_ret = 0;
+
+	if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
+		aq_ret = I40E_ERR_PARAM;
+		goto err;
+	}
+
+	i40e_vlan_stripping_enable(vsi);
+
+	/* send the response to the VF */
+err:
+	return i40e_vc_send_resp_to_vf(vf, VIRTCHNL_OP_ENABLE_VLAN_STRIPPING,
+				       aq_ret);
+}
+
+/**
+ * i40e_vc_disable_vlan_stripping
+ * @vf: pointer to the VF info
+ * @msg: pointer to the msg buffer
+ * @msglen: msg length
+ *
+ * Disable vlan header stripping for the VF
+ **/
+static int i40e_vc_disable_vlan_stripping(struct i40e_vf *vf, u8 *msg,
+					  u16 msglen)
+{
+	struct i40e_vsi *vsi = vf->pf->vsi[vf->lan_vsi_idx];
+	i40e_status aq_ret = 0;
+
+	if (!test_bit(I40E_VF_STATE_ACTIVE, &vf->vf_states)) {
+		aq_ret = I40E_ERR_PARAM;
+		goto err;
+	}
+
+	i40e_vlan_stripping_disable(vsi);
+
+	/* send the response to the VF */
+err:
+	return i40e_vc_send_resp_to_vf(vf, VIRTCHNL_OP_DISABLE_VLAN_STRIPPING,
+				       aq_ret);
+}
+
 /**
  * i40e_vc_process_vf_msg
  * @pf: pointer to the PF structure
@@ -2648,6 +2702,12 @@ int i40e_vc_process_vf_msg(struct i40e_pf *pf, s16 vf_id, u32 v_opcode,
 	case VIRTCHNL_OP_SET_RSS_HENA:
 		ret = i40e_vc_set_rss_hena(vf, msg, msglen);
 		break;
+	case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING:
+		ret = i40e_vc_enable_vlan_stripping(vf, msg, msglen);
+		break;
+	case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING:
+		ret = i40e_vc_disable_vlan_stripping(vf, msg, msglen);
+		break;
 
 	case VIRTCHNL_OP_UNKNOWN:
 	default:
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf.h b/drivers/net/ethernet/intel/i40evf/i40evf.h
index e5293d35fb6a..82f69031e5cd 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf.h
+++ b/drivers/net/ethernet/intel/i40evf/i40evf.h
@@ -261,6 +261,8 @@ struct i40evf_adapter {
 #define I40EVF_FLAG_AQ_RELEASE_PROMISC		BIT(16)
 #define I40EVF_FLAG_AQ_REQUEST_ALLMULTI		BIT(17)
 #define I40EVF_FLAG_AQ_RELEASE_ALLMULTI		BIT(18)
+#define I40EVF_FLAG_AQ_ENABLE_VLAN_STRIPPING	BIT(19)
+#define I40EVF_FLAG_AQ_DISABLE_VLAN_STRIPPING	BIT(20)
 
 	/* OS defined structs */
 	struct net_device *netdev;
@@ -358,6 +360,8 @@ void i40evf_get_hena(struct i40evf_adapter *adapter);
 void i40evf_set_hena(struct i40evf_adapter *adapter);
 void i40evf_set_rss_key(struct i40evf_adapter *adapter);
 void i40evf_set_rss_lut(struct i40evf_adapter *adapter);
+void i40evf_enable_vlan_stripping(struct i40evf_adapter *adapter);
+void i40evf_disable_vlan_stripping(struct i40evf_adapter *adapter);
 void i40evf_virtchnl_completion(struct i40evf_adapter *adapter,
 				enum virtchnl_ops v_opcode,
 				i40e_status v_retval, u8 *msg, u16 msglen);
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 258e8e27068b..9ee277e87f10 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -1676,6 +1676,16 @@ static void i40evf_watchdog_task(struct work_struct *work)
 		goto watchdog_done;
 	}
 
+	if (adapter->aq_required & I40EVF_FLAG_AQ_ENABLE_VLAN_STRIPPING) {
+		i40evf_enable_vlan_stripping(adapter);
+		goto watchdog_done;
+	}
+
+	if (adapter->aq_required & I40EVF_FLAG_AQ_DISABLE_VLAN_STRIPPING) {
+		i40evf_disable_vlan_stripping(adapter);
+		goto watchdog_done;
+	}
+
 	if (adapter->aq_required & I40EVF_FLAG_AQ_CONFIGURE_QUEUES) {
 		i40evf_configure_queues(adapter);
 		goto watchdog_done;
@@ -2293,6 +2303,28 @@ static int i40evf_change_mtu(struct net_device *netdev, int new_mtu)
 	return 0;
 }
 
+/**
+ * i40e_set_features - set the netdev feature flags
+ * @netdev: ptr to the netdev being adjusted
+ * @features: the feature set that the stack is suggesting
+ * Note: expects to be called while under rtnl_lock()
+ **/
+static int i40evf_set_features(struct net_device *netdev,
+			       netdev_features_t features)
+{
+	struct i40evf_adapter *adapter = netdev_priv(netdev);
+
+	if (!VLAN_ALLOWED(adapter))
+		return -EINVAL;
+
+	if (features & NETIF_F_HW_VLAN_CTAG_RX)
+		adapter->aq_required |= I40EVF_FLAG_AQ_ENABLE_VLAN_STRIPPING;
+	else
+		adapter->aq_required |= I40EVF_FLAG_AQ_DISABLE_VLAN_STRIPPING;
+
+	return 0;
+}
+
 /**
  * i40evf_features_check - Validate encapsulated packet conforms to limits
  * @skb: skb buff
@@ -2386,6 +2418,7 @@ static const struct net_device_ops i40evf_netdev_ops = {
 	.ndo_vlan_rx_kill_vid	= i40evf_vlan_rx_kill_vid,
 	.ndo_features_check	= i40evf_features_check,
 	.ndo_fix_features	= i40evf_fix_features,
+	.ndo_set_features	= i40evf_set_features,
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	.ndo_poll_controller	= i40evf_netpoll,
 #endif
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c b/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
index 6c403bf1bbb8..85876f4fb1fb 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_virtchnl.c
@@ -820,6 +820,46 @@ void i40evf_set_rss_lut(struct i40evf_adapter *adapter)
 	kfree(vrl);
 }
 
+/**
+ * i40evf_enable_vlan_stripping
+ * @adapter: adapter structure
+ *
+ * Request VLAN header stripping to be enabled
+ **/
+void i40evf_enable_vlan_stripping(struct i40evf_adapter *adapter)
+{
+	if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) {
+		/* bail because we already have a command pending */
+		dev_err(&adapter->pdev->dev, "Cannot enable stripping, command %d pending\n",
+			adapter->current_op);
+		return;
+	}
+	adapter->current_op = VIRTCHNL_OP_ENABLE_VLAN_STRIPPING;
+	adapter->aq_required &= ~I40EVF_FLAG_AQ_ENABLE_VLAN_STRIPPING;
+	i40evf_send_pf_msg(adapter, VIRTCHNL_OP_ENABLE_VLAN_STRIPPING,
+			   NULL, 0);
+}
+
+/**
+ * i40evf_disable_vlan_stripping
+ * @adapter: adapter structure
+ *
+ * Request VLAN header stripping to be disabled
+ **/
+void i40evf_disable_vlan_stripping(struct i40evf_adapter *adapter)
+{
+	if (adapter->current_op != VIRTCHNL_OP_UNKNOWN) {
+		/* bail because we already have a command pending */
+		dev_err(&adapter->pdev->dev, "Cannot disable stripping, command %d pending\n",
+			adapter->current_op);
+		return;
+	}
+	adapter->current_op = VIRTCHNL_OP_DISABLE_VLAN_STRIPPING;
+	adapter->aq_required &= ~I40EVF_FLAG_AQ_DISABLE_VLAN_STRIPPING;
+	i40evf_send_pf_msg(adapter, VIRTCHNL_OP_DISABLE_VLAN_STRIPPING,
+			   NULL, 0);
+}
+
 /**
  * i40evf_print_link_message - print link up or down
  * @adapter: adapter structure
diff --git a/include/linux/avf/virtchnl.h b/include/linux/avf/virtchnl.h
index becfca2ae94e..2b038442c352 100644
--- a/include/linux/avf/virtchnl.h
+++ b/include/linux/avf/virtchnl.h
@@ -133,6 +133,8 @@ enum virtchnl_ops {
 	VIRTCHNL_OP_CONFIG_RSS_LUT = 24,
 	VIRTCHNL_OP_GET_RSS_HENA_CAPS = 25,
 	VIRTCHNL_OP_SET_RSS_HENA = 26,
+	VIRTCHNL_OP_ENABLE_VLAN_STRIPPING = 27,
+	VIRTCHNL_OP_DISABLE_VLAN_STRIPPING = 28,
 };
 
 /* This macro is used to generate a compilation error if a structure
@@ -686,6 +688,9 @@ virtchnl_vc_validate_vf_msg(struct virtchnl_version_info *ver, u32 v_opcode,
 	case VIRTCHNL_OP_SET_RSS_HENA:
 		valid_len = sizeof(struct virtchnl_rss_hena);
 		break;
+	case VIRTCHNL_OP_ENABLE_VLAN_STRIPPING:
+	case VIRTCHNL_OP_DISABLE_VLAN_STRIPPING:
+		break;
 	/* These are always errors coming from the VF. */
 	case VIRTCHNL_OP_EVENT:
 	case VIRTCHNL_OP_UNKNOWN:

From 68e49702a1216bbf098ebfff954eeb8f6fd96415 Mon Sep 17 00:00:00 2001
From: Mariusz Stachura <mariusz.stachura@intel.com>
Date: Wed, 12 Jul 2017 05:46:14 -0400
Subject: [PATCH 08/15] i40e: 25G FEC status improvements

This patch improves the system log message. The log message will
be expanded to include the FEC mode the FW requested before link
was established.

Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 3a6a752c6c58..5a06cd23b9e6 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -5354,6 +5354,7 @@ void i40e_print_link_message(struct i40e_vsi *vsi, bool isup)
 	char *speed = "Unknown";
 	char *fc = "Unknown";
 	char *fec = "";
+	char *req_fec = "";
 	char *an = "";
 
 	new_speed = vsi->back->hw.phy.link_info.link_speed;
@@ -5415,6 +5416,7 @@ void i40e_print_link_message(struct i40e_vsi *vsi, bool isup)
 	}
 
 	if (vsi->back->hw.phy.link_info.link_speed == I40E_LINK_SPEED_25GB) {
+		req_fec = ", Requested FEC: None";
 		fec = ", FEC: None";
 		an = ", Autoneg: False";
 
@@ -5427,10 +5429,22 @@ void i40e_print_link_message(struct i40e_vsi *vsi, bool isup)
 		else if (vsi->back->hw.phy.link_info.fec_info &
 			 I40E_AQ_CONFIG_FEC_RS_ENA)
 			fec = ", FEC: CL108 RS-FEC";
+
+		/* 'CL108 RS-FEC' should be displayed when RS is requested, or
+		 * both RS and FC are requested
+		 */
+		if (vsi->back->hw.phy.link_info.req_fec_info &
+		    (I40E_AQ_REQUEST_FEC_KR | I40E_AQ_REQUEST_FEC_RS)) {
+			if (vsi->back->hw.phy.link_info.req_fec_info &
+			    I40E_AQ_REQUEST_FEC_RS)
+				req_fec = ", Requested FEC: CL108 RS-FEC";
+			else
+				req_fec = ", Requested FEC: CL74 FC-FEC/BASE-R";
+		}
 	}
 
-	netdev_info(vsi->netdev, "NIC Link is Up, %sbps Full Duplex%s%s, Flow Control: %s\n",
-		    speed, fec, an, fc);
+	netdev_info(vsi->netdev, "NIC Link is Up, %sbps Full Duplex%s%s%s, Flow Control: %s\n",
+		    speed, req_fec, fec, an, fc);
 }
 
 /**

From 19279235bea221798e3307a8bec2c02559cab0c5 Mon Sep 17 00:00:00 2001
From: Carolyn Wyborny <carolyn.wyborny@intel.com>
Date: Fri, 14 Jul 2017 09:10:07 -0400
Subject: [PATCH 09/15] i40e: Fix for unused value issue found by static
 analysis

This patch fixes an issue where an error return value is
set, but without an immediate exit, the value can be overwritten
by the following code execution.  The condition  at this point
is not fatal, so remove the error assignment and comment the
intent for future code maintainers

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 5a06cd23b9e6..0962b85ef6f3 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -9884,13 +9884,15 @@ static int i40e_add_vsi(struct i40e_vsi *vsi)
 			 */
 			ret = i40e_vsi_config_tc(vsi, enabled_tc);
 			if (ret) {
+				/* Single TC condition is not fatal,
+				 * message and continue
+				 */
 				dev_info(&pf->pdev->dev,
 					 "failed to configure TCs for main VSI tc_map 0x%08x, err %s aq_err %s\n",
 					 enabled_tc,
 					 i40e_stat_str(&pf->hw, ret),
 					 i40e_aq_str(&pf->hw,
 						    pf->hw.aq.asq_last_status));
-				ret = -ENOENT;
 			}
 		}
 		break;

From ba4460d45a6ec04e29e55e6c97edc0e842c18999 Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Fri, 14 Jul 2017 09:10:08 -0400
Subject: [PATCH 10/15] i40e: remove workaround for resetting XPS

Since commit 3ffa037d7f78 ("i40e: Set XPS bit mask to zero in DCB mode")
we've tried to reset the XPS settings by building a custom
empty CPU mask.

This workaround is not necessary because we're not really removing the
XPS setting, but simply setting it so that no CPU is valid.

Second, we shorten the code further by using zalloc_cpumask_var instead
of a separate call to bitmap_zero().

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c | 17 +++++------------
 1 file changed, 5 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 0962b85ef6f3..7366e7c7f399 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2874,22 +2874,15 @@ static void i40e_vsi_free_rx_resources(struct i40e_vsi *vsi)
 static void i40e_config_xps_tx_ring(struct i40e_ring *ring)
 {
 	struct i40e_vsi *vsi = ring->vsi;
-	cpumask_var_t mask;
 
 	if (!ring->q_vector || !ring->netdev)
 		return;
 
-	/* Single TC mode enable XPS */
-	if (vsi->tc_config.numtc <= 1) {
-		if (!test_and_set_bit(__I40E_TX_XPS_INIT_DONE, &ring->state))
-			netif_set_xps_queue(ring->netdev,
-					    &ring->q_vector->affinity_mask,
-					    ring->queue_index);
-	} else if (alloc_cpumask_var(&mask, GFP_KERNEL)) {
-		/* Disable XPS to allow selection based on TC */
-		bitmap_zero(cpumask_bits(mask), nr_cpumask_bits);
-		netif_set_xps_queue(ring->netdev, mask, ring->queue_index);
-		free_cpumask_var(mask);
+	if ((vsi->tc_config.numtc <= 1) &&
+	    !test_and_set_bit(__I40E_TX_XPS_INIT_DONE, &ring->state)) {
+		netif_set_xps_queue(ring->netdev,
+				    &ring->q_vector->affinity_mask,
+				    ring->queue_index);
 	}
 
 	/* schedule our worker thread which will take care of

From 9254c0e34e4253c41fdcd4670b754506ce20d3eb Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Fri, 14 Jul 2017 09:10:09 -0400
Subject: [PATCH 11/15] i40e: move enabling icr0 into i40e_update_enable_itr

If we don't have MSI-X enabled, we handle interrupts on all icr0. This
is a special case, so let's move the conditional into
i40e_update_enable_itr() in order to make i40e_napi_poll easier to
read about.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 8a969d8f0790..5c1edcce9459 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -2243,6 +2243,12 @@ static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
 	int idx = q_vector->v_idx;
 	int rx_itr_setting, tx_itr_setting;
 
+	/* If we don't have MSIX, then we only need to re-enable icr0 */
+	if (!(vsi->back->flags & I40E_FLAG_MSIX_ENABLED)) {
+		i40e_irq_dynamic_enable_icr0(vsi->back, false);
+		return;
+	}
+
 	vector = (q_vector->v_idx + vsi->base_vector);
 
 	/* avoid dynamic calculation if in countdown mode OR if
@@ -2396,8 +2402,6 @@ tx_only:
 	 */
 	if (!clean_complete)
 		i40e_force_wb(vsi, q_vector);
-	else if (!(vsi->back->flags & I40E_FLAG_MSIX_ENABLED))
-		i40e_irq_dynamic_enable_icr0(vsi->back, false);
 	else
 		i40e_update_enable_itr(vsi, q_vector);
 

From 759dc4a7e605e0dc21708b0a6e0816ed0ac82641 Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Fri, 14 Jul 2017 09:10:10 -0400
Subject: [PATCH 12/15] i40e: initialize our affinity_mask based on
 cpu_possible_mask

On older kernels a call to irq_set_affinity_hint does not guarantee that
the IRQ affinity will be set. If nothing else on the system sets the IRQ
affinity this can result in a bug in the i40e_napi_poll() routine where
we notice that our interrupt fired on the "wrong" CPU according to our
internal affinity_mask variable.

This results in a bug where we continuously tell NAPI to stop polling to
move the interrupt to a new CPU, but the CPU never changes because our
affinity mask does not match the actual mask setup for the IRQ.

The root problem is a mismatched affinity mask value. So lets initialize
the value to cpu_possible_mask instead. This ensures that prior to the
first time we get an IRQ affinity notification we'll have the mask set
to include every possible CPU.

We use cpu_possible_mask instead of cpu_online_mask since the former is
almost certainly never going to change, while the later might change
after we've made a copy.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_main.c     | 12 +++++++-----
 drivers/net/ethernet/intel/i40evf/i40evf_main.c |  7 +++++--
 2 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 7366e7c7f399..6498da8806cb 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2881,7 +2881,7 @@ static void i40e_config_xps_tx_ring(struct i40e_ring *ring)
 	if ((vsi->tc_config.numtc <= 1) &&
 	    !test_and_set_bit(__I40E_TX_XPS_INIT_DONE, &ring->state)) {
 		netif_set_xps_queue(ring->netdev,
-				    &ring->q_vector->affinity_mask,
+				    get_cpu_mask(ring->q_vector->v_idx),
 				    ring->queue_index);
 	}
 
@@ -3506,8 +3506,10 @@ static int i40e_vsi_request_irq_msix(struct i40e_vsi *vsi, char *basename)
 		q_vector->affinity_notify.notify = i40e_irq_affinity_notify;
 		q_vector->affinity_notify.release = i40e_irq_affinity_release;
 		irq_set_affinity_notifier(irq_num, &q_vector->affinity_notify);
-		/* assign the mask for this irq */
-		irq_set_affinity_hint(irq_num, &q_vector->affinity_mask);
+		/* get_cpu_mask returns a static constant mask with
+		 * a permanent lifetime so it's ok to use here.
+		 */
+		irq_set_affinity_hint(irq_num, get_cpu_mask(q_vector->v_idx));
 	}
 
 	vsi->irqs_ready = true;
@@ -4289,7 +4291,7 @@ static void i40e_vsi_free_irq(struct i40e_vsi *vsi)
 
 			/* clear the affinity notifier in the IRQ descriptor */
 			irq_set_affinity_notifier(irq_num, NULL);
-			/* clear the affinity_mask in the IRQ descriptor */
+			/* remove our suggested affinity mask for this IRQ */
 			irq_set_affinity_hint(irq_num, NULL);
 			synchronize_irq(irq_num);
 			free_irq(irq_num, vsi->q_vectors[i]);
@@ -8235,7 +8237,7 @@ static int i40e_vsi_alloc_q_vector(struct i40e_vsi *vsi, int v_idx, int cpu)
 
 	q_vector->vsi = vsi;
 	q_vector->v_idx = v_idx;
-	cpumask_set_cpu(cpu, &q_vector->affinity_mask);
+	cpumask_copy(&q_vector->affinity_mask, cpu_possible_mask);
 
 	if (vsi->netdev)
 		netif_napi_add(vsi->netdev, &q_vector->napi,
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index 9ee277e87f10..1825d956bb00 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -584,8 +584,10 @@ i40evf_request_traffic_irqs(struct i40evf_adapter *adapter, char *basename)
 		q_vector->affinity_notify.release =
 						   i40evf_irq_affinity_release;
 		irq_set_affinity_notifier(irq_num, &q_vector->affinity_notify);
-		/* assign the mask for this irq */
-		irq_set_affinity_hint(irq_num, &q_vector->affinity_mask);
+		/* get_cpu_mask returns a static constant mask with
+		 * a permanent lifetime so it's ok to use here.
+		 */
+		irq_set_affinity_hint(irq_num, get_cpu_mask(q_vector->v_idx));
 	}
 
 	return 0;
@@ -1456,6 +1458,7 @@ static int i40evf_alloc_q_vectors(struct i40evf_adapter *adapter)
 		q_vector->adapter = adapter;
 		q_vector->vsi = &adapter->vsi;
 		q_vector->v_idx = q_idx;
+		cpumask_copy(&q_vector->affinity_mask, cpu_possible_mask);
 		netif_napi_add(adapter->netdev, &q_vector->napi,
 			       i40evf_napi_poll, NAPI_POLL_WEIGHT);
 	}

From 6d9777298b54bf1212fcaa6ee6679a430ceca452 Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Fri, 14 Jul 2017 09:10:11 -0400
Subject: [PATCH 13/15] i40e: invert logic for checking incorrect cpu vs irq
 affinity

In commit 96db776a3682 ("i40e/vf: fix interrupt affinity bug")
we added some code to force exit of polling in case we did
not have the correct CPU. This is important since it was possible for
the IRQ affinity to be changed while the CPU is pegged at 100%. This can
result in the polling routine being stuck on the wrong CPU until
traffic finally stops.

Unfortunately, the implementation, "if the CPU is correct, exit as
normal, otherwise, fall-through to the end-polling exit" is incredibly
confusing to reason about. In this case, the normal flow looks like the
exception, while the exception actually occurs far away from the if
statement and comment.

We recently discovered and fixed a bug in this code because we were
incorrectly initializing the affinity mask.

Re-write the code so that the exceptional case is handled at the check,
rather than having the logic be spread through the regular exit flow.
This does end up with minor code duplication, but the resulting code is
much easier to reason about.

The new logic is identical, but inverted. If we are running on a CPU not
in our affinity mask, we'll exit polling. However, the code flow is much
easier to understand.

Note that we don't actually have to check for MSI-X, because in the MSI
case we'll only have one q_vector, but its default affinity mask should
be correct as it includes all CPUs when it's initialized. Further, we
could at some point add code to setup the notifier for the non-MSI-X
case and enable this workaround for that case too, if desired, though
there isn't much gain since its unlikely to be the common case.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c   | 33 +++++++++----------
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 32 +++++++++---------
 2 files changed, 32 insertions(+), 33 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 5c1edcce9459..3999afea518b 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -2369,7 +2369,6 @@ int i40e_napi_poll(struct napi_struct *napi, int budget)
 
 	/* If work not completed, return budget and polling will return */
 	if (!clean_complete) {
-		const cpumask_t *aff_mask = &q_vector->affinity_mask;
 		int cpu_id = smp_processor_id();
 
 		/* It is possible that the interrupt affinity has changed but,
@@ -2379,15 +2378,22 @@ int i40e_napi_poll(struct napi_struct *napi, int budget)
 		 * continue to poll, otherwise we must stop polling so the
 		 * interrupt can move to the correct cpu.
 		 */
-		if (likely(cpumask_test_cpu(cpu_id, aff_mask) ||
-			   !(vsi->back->flags & I40E_FLAG_MSIX_ENABLED))) {
-tx_only:
-			if (arm_wb) {
-				q_vector->tx.ring[0].tx_stats.tx_force_wb++;
-				i40e_enable_wb_on_itr(vsi, q_vector);
-			}
-			return budget;
+		if (!cpumask_test_cpu(cpu_id, &q_vector->affinity_mask)) {
+			/* Tell napi that we are done polling */
+			napi_complete_done(napi, work_done);
+
+			/* Force an interrupt */
+			i40e_force_wb(vsi, q_vector);
+
+			/* Return budget-1 so that polling stops */
+			return budget - 1;
 		}
+tx_only:
+		if (arm_wb) {
+			q_vector->tx.ring[0].tx_stats.tx_force_wb++;
+			i40e_enable_wb_on_itr(vsi, q_vector);
+		}
+		return budget;
 	}
 
 	if (vsi->back->flags & I40E_TXR_FLAGS_WB_ON_ITR)
@@ -2396,14 +2402,7 @@ tx_only:
 	/* Work is done so exit the polling mode and re-enable the interrupt */
 	napi_complete_done(napi, work_done);
 
-	/* If we're prematurely stopping polling to fix the interrupt
-	 * affinity we want to make sure polling starts back up so we
-	 * issue a call to i40e_force_wb which triggers a SW interrupt.
-	 */
-	if (!clean_complete)
-		i40e_force_wb(vsi, q_vector);
-	else
-		i40e_update_enable_itr(vsi, q_vector);
+	i40e_update_enable_itr(vsi, q_vector);
 
 	return min(work_done, budget - 1);
 }
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index d91676ccf125..f15e341ada9e 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -1575,7 +1575,6 @@ int i40evf_napi_poll(struct napi_struct *napi, int budget)
 
 	/* If work not completed, return budget and polling will return */
 	if (!clean_complete) {
-		const cpumask_t *aff_mask = &q_vector->affinity_mask;
 		int cpu_id = smp_processor_id();
 
 		/* It is possible that the interrupt affinity has changed but,
@@ -1585,14 +1584,22 @@ int i40evf_napi_poll(struct napi_struct *napi, int budget)
 		 * continue to poll, otherwise we must stop polling so the
 		 * interrupt can move to the correct cpu.
 		 */
-		if (likely(cpumask_test_cpu(cpu_id, aff_mask))) {
-tx_only:
-			if (arm_wb) {
-				q_vector->tx.ring[0].tx_stats.tx_force_wb++;
-				i40e_enable_wb_on_itr(vsi, q_vector);
-			}
-			return budget;
+		if (!cpumask_test_cpu(cpu_id, &q_vector->affinity_mask)) {
+			/* Tell napi that we are done polling */
+			napi_complete_done(napi, work_done);
+
+			/* Force an interrupt */
+			i40evf_force_wb(vsi, q_vector);
+
+			/* Return budget-1 so that polling stops */
+			return budget - 1;
 		}
+tx_only:
+		if (arm_wb) {
+			q_vector->tx.ring[0].tx_stats.tx_force_wb++;
+			i40e_enable_wb_on_itr(vsi, q_vector);
+		}
+		return budget;
 	}
 
 	if (vsi->back->flags & I40E_TXR_FLAGS_WB_ON_ITR)
@@ -1601,14 +1608,7 @@ tx_only:
 	/* Work is done so exit the polling mode and re-enable the interrupt */
 	napi_complete_done(napi, work_done);
 
-	/* If we're prematurely stopping polling to fix the interrupt
-	 * affinity we want to make sure polling starts back up so we
-	 * issue a call to i40evf_force_wb which triggers a SW interrupt.
-	 */
-	if (!clean_complete)
-		i40evf_force_wb(vsi, q_vector);
-	else
-		i40e_update_enable_itr(vsi, q_vector);
+	i40e_update_enable_itr(vsi, q_vector);
 
 	return min(work_done, budget - 1);
 }

From 0a2c7722be1705edca34458bd9de2f97188f9636 Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Fri, 14 Jul 2017 09:10:12 -0400
Subject: [PATCH 14/15] i40e/i40evf: remove ULTRA latency mode

Since commit c56625d59726 ("i40e/i40evf: change dynamic interrupt
thresholds") a new higher latency ITR setting called I40E_ULTRA_LATENCY
was added with a cryptic comment about how it was meant for adjusting Rx
more aggressively when streaming small packets.

This mode was attempting to calculate packets per second and then kick
in when we have a huge number of small packets.

Unfortunately, the ULTRA setting was kicking in for workloads it wasn't
intended for including single-thread UDP_STREAM workloads.

This wasn't caught for a variety of reasons. First, the ip_defrag
routines were improved somewhat which makes the UDP_STREAM test still
reasonable at 10GbE, even when dropped down to 8k interrupts a second.
Additionally, some other obvious workloads appear to work fine, such
as TCP_STREAM.

The number 40k doesn't make sense for a number of reasons. First, we
absolutely can do more than 40k packets per second. Second, we calculate
the value inline in an integer, which sometimes can overflow resulting
in using incorrect values.

If we fix this overflow it makes it even more likely that we'll enter
ULTRA mode which is the opposite of what we want.

The ULTRA mode was added originally as a way to reduce CPU utilization
during a small packet workload where we weren't keeping up anyways. It
should never have been kicking in during these other workloads.

Given the issues outlined above, let's remove the ULTRA latency mode. If
necessary, a better solution to the CPU utilization issue for small
packet workloads will be added in a future patch.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c   | 17 -----------------
 drivers/net/ethernet/intel/i40e/i40e_txrx.h   |  1 -
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 17 -----------------
 drivers/net/ethernet/intel/i40evf/i40e_txrx.h |  1 -
 4 files changed, 36 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index 3999afea518b..f00f233092e9 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -959,7 +959,6 @@ void i40e_force_wb(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector)
 static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc)
 {
 	enum i40e_latency_range new_latency_range = rc->latency_range;
-	struct i40e_q_vector *qv = rc->ring->q_vector;
 	u32 new_itr = rc->itr;
 	int bytes_per_int;
 	int usecs;
@@ -971,7 +970,6 @@ static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc)
 	 *   0-10MB/s   lowest (50000 ints/s)
 	 *  10-20MB/s   low    (20000 ints/s)
 	 *  20-1249MB/s bulk   (18000 ints/s)
-	 *  > 40000 Rx packets per second (8000 ints/s)
 	 *
 	 * The math works out because the divisor is in 10^(-6) which
 	 * turns the bytes/us input value into MB/s values, but
@@ -994,24 +992,12 @@ static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc)
 			new_latency_range = I40E_LOWEST_LATENCY;
 		break;
 	case I40E_BULK_LATENCY:
-	case I40E_ULTRA_LATENCY:
 	default:
 		if (bytes_per_int <= 20)
 			new_latency_range = I40E_LOW_LATENCY;
 		break;
 	}
 
-	/* this is to adjust RX more aggressively when streaming small
-	 * packets.  The value of 40000 was picked as it is just beyond
-	 * what the hardware can receive per second if in low latency
-	 * mode.
-	 */
-#define RX_ULTRA_PACKET_RATE 40000
-
-	if ((((rc->total_packets * 1000000) / usecs) > RX_ULTRA_PACKET_RATE) &&
-	    (&qv->rx == rc))
-		new_latency_range = I40E_ULTRA_LATENCY;
-
 	rc->latency_range = new_latency_range;
 
 	switch (new_latency_range) {
@@ -1024,9 +1010,6 @@ static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc)
 	case I40E_BULK_LATENCY:
 		new_itr = I40E_ITR_18K;
 		break;
-	case I40E_ULTRA_LATENCY:
-		new_itr = I40E_ITR_8K;
-		break;
 	default:
 		break;
 	}
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
index f0a0eabc2666..e6456e8a899c 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
@@ -454,7 +454,6 @@ enum i40e_latency_range {
 	I40E_LOWEST_LATENCY = 0,
 	I40E_LOW_LATENCY = 1,
 	I40E_BULK_LATENCY = 2,
-	I40E_ULTRA_LATENCY = 3,
 };
 
 struct i40e_ring_container {
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index f15e341ada9e..2f7d9f4a6746 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -357,7 +357,6 @@ void i40evf_force_wb(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector)
 static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc)
 {
 	enum i40e_latency_range new_latency_range = rc->latency_range;
-	struct i40e_q_vector *qv = rc->ring->q_vector;
 	u32 new_itr = rc->itr;
 	int bytes_per_int;
 	int usecs;
@@ -369,7 +368,6 @@ static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc)
 	 *   0-10MB/s   lowest (50000 ints/s)
 	 *  10-20MB/s   low    (20000 ints/s)
 	 *  20-1249MB/s bulk   (18000 ints/s)
-	 *  > 40000 Rx packets per second (8000 ints/s)
 	 *
 	 * The math works out because the divisor is in 10^(-6) which
 	 * turns the bytes/us input value into MB/s values, but
@@ -392,24 +390,12 @@ static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc)
 			new_latency_range = I40E_LOWEST_LATENCY;
 		break;
 	case I40E_BULK_LATENCY:
-	case I40E_ULTRA_LATENCY:
 	default:
 		if (bytes_per_int <= 20)
 			new_latency_range = I40E_LOW_LATENCY;
 		break;
 	}
 
-	/* this is to adjust RX more aggressively when streaming small
-	 * packets.  The value of 40000 was picked as it is just beyond
-	 * what the hardware can receive per second if in low latency
-	 * mode.
-	 */
-#define RX_ULTRA_PACKET_RATE 40000
-
-	if ((((rc->total_packets * 1000000) / usecs) > RX_ULTRA_PACKET_RATE) &&
-	    (&qv->rx == rc))
-		new_latency_range = I40E_ULTRA_LATENCY;
-
 	rc->latency_range = new_latency_range;
 
 	switch (new_latency_range) {
@@ -422,9 +408,6 @@ static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc)
 	case I40E_BULK_LATENCY:
 		new_itr = I40E_ITR_18K;
 		break;
-	case I40E_ULTRA_LATENCY:
-		new_itr = I40E_ITR_8K;
-		break;
 	default:
 		break;
 	}
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
index 489684002e94..fb506c9f5a6e 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
@@ -425,7 +425,6 @@ enum i40e_latency_range {
 	I40E_LOWEST_LATENCY = 0,
 	I40E_LOW_LATENCY = 1,
 	I40E_BULK_LATENCY = 2,
-	I40E_ULTRA_LATENCY = 3,
 };
 
 struct i40e_ring_container {

From 742c9875759c1858c3312442a78a80f3e93d82c4 Mon Sep 17 00:00:00 2001
From: Jacob Keller <jacob.e.keller@intel.com>
Date: Fri, 14 Jul 2017 09:10:13 -0400
Subject: [PATCH 15/15] i40e/i40evf: avoid dynamic ITR updates when polling or
 low packet rate

The dynamic ITR algorithm depends on a calculation of usecs which
assumes that the interrupts have been firing constantly at the interrupt
throttle rate. This is not guaranteed because we could have a low packet
rate, or have been polling in software.

We'll estimate whether this is the case by using jiffies to determine if
we've been too long. If the time difference of jiffies is larger we are
guaranteed to have an incorrect calculation. If the time difference of
jiffies is smaller we might have been polling some but the difference
shouldn't affect the calculation too much.

This ensures that we don't get stuck in BULK latency during certain rare
situations where we receive bursts of packets that force us into NAPI
polling.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/i40e/i40e_txrx.c   | 22 ++++++++++++++-----
 drivers/net/ethernet/intel/i40e/i40e_txrx.h   |  1 +
 drivers/net/ethernet/intel/i40evf/i40e_txrx.c | 22 ++++++++++++++-----
 drivers/net/ethernet/intel/i40evf/i40e_txrx.h |  1 +
 4 files changed, 36 insertions(+), 10 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index f00f233092e9..1519dfb851d0 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -961,11 +961,25 @@ static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc)
 	enum i40e_latency_range new_latency_range = rc->latency_range;
 	u32 new_itr = rc->itr;
 	int bytes_per_int;
-	int usecs;
+	unsigned int usecs, estimated_usecs;
 
 	if (rc->total_packets == 0 || !rc->itr)
 		return false;
 
+	usecs = (rc->itr << 1) * ITR_COUNTDOWN_START;
+	bytes_per_int = rc->total_bytes / usecs;
+
+	/* The calculations in this algorithm depend on interrupts actually
+	 * firing at the ITR rate. This may not happen if the packet rate is
+	 * really low, or if we've been napi polling. Check to make sure
+	 * that's not the case before we continue.
+	 */
+	estimated_usecs = jiffies_to_usecs(jiffies - rc->last_itr_update);
+	if (estimated_usecs > usecs) {
+		new_latency_range = I40E_LOW_LATENCY;
+		goto reset_latency;
+	}
+
 	/* simple throttlerate management
 	 *   0-10MB/s   lowest (50000 ints/s)
 	 *  10-20MB/s   low    (20000 ints/s)
@@ -977,9 +991,6 @@ static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc)
 	 * are in 2 usec increments in the ITR registers, and make sure
 	 * to use the smoothed values that the countdown timer gives us.
 	 */
-	usecs = (rc->itr << 1) * ITR_COUNTDOWN_START;
-	bytes_per_int = rc->total_bytes / usecs;
-
 	switch (new_latency_range) {
 	case I40E_LOWEST_LATENCY:
 		if (bytes_per_int > 10)
@@ -998,6 +1009,7 @@ static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc)
 		break;
 	}
 
+reset_latency:
 	rc->latency_range = new_latency_range;
 
 	switch (new_latency_range) {
@@ -1016,12 +1028,12 @@ static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc)
 
 	rc->total_bytes = 0;
 	rc->total_packets = 0;
+	rc->last_itr_update = jiffies;
 
 	if (new_itr != rc->itr) {
 		rc->itr = new_itr;
 		return true;
 	}
-
 	return false;
 }
 
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.h b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
index e6456e8a899c..2f848bc5e391 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.h
@@ -461,6 +461,7 @@ struct i40e_ring_container {
 	struct i40e_ring *ring;
 	unsigned int total_bytes;	/* total bytes processed this int */
 	unsigned int total_packets;	/* total packets processed this int */
+	unsigned long last_itr_update;	/* jiffies of last ITR update */
 	u16 count;
 	enum i40e_latency_range latency_range;
 	u16 itr;
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index 2f7d9f4a6746..c32c62462c84 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -359,11 +359,25 @@ static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc)
 	enum i40e_latency_range new_latency_range = rc->latency_range;
 	u32 new_itr = rc->itr;
 	int bytes_per_int;
-	int usecs;
+	unsigned int usecs, estimated_usecs;
 
 	if (rc->total_packets == 0 || !rc->itr)
 		return false;
 
+	usecs = (rc->itr << 1) * ITR_COUNTDOWN_START;
+	bytes_per_int = rc->total_bytes / usecs;
+
+	/* The calculations in this algorithm depend on interrupts actually
+	 * firing at the ITR rate. This may not happen if the packet rate is
+	 * really low, or if we've been napi polling. Check to make sure
+	 * that's not the case before we continue.
+	 */
+	estimated_usecs = jiffies_to_usecs(jiffies - rc->last_itr_update);
+	if (estimated_usecs > usecs) {
+		new_latency_range = I40E_LOW_LATENCY;
+		goto reset_latency;
+	}
+
 	/* simple throttlerate management
 	 *   0-10MB/s   lowest (50000 ints/s)
 	 *  10-20MB/s   low    (20000 ints/s)
@@ -375,9 +389,6 @@ static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc)
 	 * are in 2 usec increments in the ITR registers, and make sure
 	 * to use the smoothed values that the countdown timer gives us.
 	 */
-	usecs = (rc->itr << 1) * ITR_COUNTDOWN_START;
-	bytes_per_int = rc->total_bytes / usecs;
-
 	switch (new_latency_range) {
 	case I40E_LOWEST_LATENCY:
 		if (bytes_per_int > 10)
@@ -396,6 +407,7 @@ static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc)
 		break;
 	}
 
+reset_latency:
 	rc->latency_range = new_latency_range;
 
 	switch (new_latency_range) {
@@ -414,12 +426,12 @@ static bool i40e_set_new_dynamic_itr(struct i40e_ring_container *rc)
 
 	rc->total_bytes = 0;
 	rc->total_packets = 0;
+	rc->last_itr_update = jiffies;
 
 	if (new_itr != rc->itr) {
 		rc->itr = new_itr;
 		return true;
 	}
-
 	return false;
 }
 
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
index fb506c9f5a6e..0d9f98bc07bd 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.h
@@ -432,6 +432,7 @@ struct i40e_ring_container {
 	struct i40e_ring *ring;
 	unsigned int total_bytes;	/* total bytes processed this int */
 	unsigned int total_packets;	/* total packets processed this int */
+	unsigned long last_itr_update;	/* jiffies of last ITR update */
 	u16 count;
 	enum i40e_latency_range latency_range;
 	u16 itr;