From a932b77b4d1939ad173f18be87da409427fb705c Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Tue, 20 Aug 2019 07:17:27 -0500 Subject: [PATCH] ARM: dts: logicpd-som-lv: Fix i2c2 and i2c3 Pin mux When the pinmux configuration was added, it was accidentally placed into the omap3_pmx_wkup node when it should have been placed into the omap3_pmx_core. This error was accidentally propagated to stable by me when I blindly requested the pull after seeing I2C issues without actually reviewing the content of the pinout. Since the bootloader previously muxed these correctly in the past, was a hidden error. This patch moves the i2c2_pins and i2c3_pins to the correct node which should eliminate i2c bus errors and timeouts due to the fact the bootloader uses the save device tree that no longer properly assigns these pins. Fixes: 5fe3c0fa0d54 ("ARM: dts: Add pinmuxing for i2c2 and i2c3 for LogicPD SOM-LV") #4.9+ Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-som-lv.dtsi | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index 5563ee54c960..b56524cc7fe2 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -228,6 +228,20 @@ >; }; + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ + >; + }; + tsc2004_pins: pinmux_tsc2004_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE4) /* mcbsp4_dr.gpio_153 */ @@ -249,18 +263,6 @@ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */ >; }; - i2c2_pins: pinmux_i2c2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */ - OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */ - >; - }; - i2c3_pins: pinmux_i2c3_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */ - OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */ - >; - }; }; &omap3_pmx_core2 {