fbdev changes for v4.20:
- update atyfb driver - improvements for ATI Mach64 chips: detect the dot clock divider correctly on Sparc, fix display corruptions (due to endianness issues and improper reading of accelerator registers), optimize scrolling performance and also fix debugging printks (Mikulas Patocka) - rewrite USB unplug handling in udlfb driver using framebuffer subsystem reference counting (Mikulas Patocka) - fix support for native-mode display-timings in atmel_lcdfb driver (Sam Ravnborg) - fix information leak & add missing access_ok() checks in sbuslib (Dan Carpenter) - allow using GPIO expanders that can sleep in ssd1307fb driver (Michal Vokáč) - convert omapfb driver to use GPIO descriptors instead of GPIO numbers for Amstrad Delta board (Janusz Krzysztofik) - fix broken Kconfig menu dependencies (Randy Dunlap) - convert fbdev subsystem to use %pOFn instead of device_node.name (Rob Herring) - remove the dead old CLPS711x LCD support driver (the new CLPS711x LCD support driver is still available) - misc fixes (Jia-Ju Bai, Gustavo A. R. Silva) - misc cleanups (Mehdi Bounya, Nathan Chancellor, YueHaibing) -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABCAAGBQJb2brsAAoJEH4ztj+gR8ILErEP/0Ae7KqsFLXg/6w/d4zrStVD jvE31VyjH0L1qLZJtCH+Mw6FFW7QmbA3ZiIhV5vr+pp/nJqKEBSi0PGPDb/Qq3// 6YHyOBChIApuvs688RcoghGHySjV5vbJZpRhIYqF7Ti7dvnJNfyptWQy6RV3EpBO EnilDtQmHG1uaZgsBPJg9fCSqPioU+JRsdobf9fG5mkKxjZVM5OWPLv81UWaJGqu GXySBkCl7gH5pvcMqklQtBkhkO3WunvUehba0gpKk6aHDSqGJZTbwy5lI1pvhLoI V02dCEfMZebx4ZX+32W/dlroP4t7stWc/RBVSbJC4vPUWcBK09VhW0Ny2CHKgvkD XazLafhWZhQBm3T2KkmU7SnZnpodnatzwwsjaIe/mKfPlWLbmiBYK2Mqv86AZ5u8 8YkUCmc/RvaWV5cY2r2mQ1iNFCcunHlwcR0o/WJVF3mDzkqZhuUXFxlJf0lUJej/ oIOtMXMqziMm1aQXTY+H0KP37WiVTUogSarolY3QeaMtsZ3f1O2hgfPD+LG8F09k ihkQ7HnYYWAGEovY9V59XQ/qdlj3TTaJrtA0rkeMtav7MXtF7BvvQi8ivD2Ou3ko J9KGK8kcmkcQ0uHDq0y59ZO3r3kGXwZgdEnzVtcAceFYdehdCYOUrd89zUGEOze5 tN/XXEycRb3PpDsMMasA =PcLW -----END PGP SIGNATURE----- Merge tag 'fbdev-v4.20' of https://github.com/bzolnier/linux Pull fbdev updates from Bartlomiej Zolnierkiewicz: "No major changes to the subsystem itself, mainly fb drivers fixes & cleanups (atyfb & udlfb updates stand out from the rest) + removal of no longer needed old clps711xfb driver. Details: - update atyfb driver - improvements for ATI Mach64 chips: detect the dot clock divider correctly on Sparc, fix display corruptions (due to endianness issues and improper reading of accelerator registers), optimize scrolling performance and also fix debugging printks (Mikulas Patocka) - rewrite USB unplug handling in udlfb driver using framebuffer subsystem reference counting (Mikulas Patocka) - fix support for native-mode display-timings in atmel_lcdfb driver (Sam Ravnborg) - fix information leak & add missing access_ok() checks in sbuslib (Dan Carpenter) - allow using GPIO expanders that can sleep in ssd1307fb driver (Michal Vokáč) - convert omapfb driver to use GPIO descriptors instead of GPIO numbers for Amstrad Delta board (Janusz Krzysztofik) - fix broken Kconfig menu dependencies (Randy Dunlap) - convert fbdev subsystem to use %pOFn instead of device_node.name (Rob Herring) - remove the dead old CLPS711x LCD support driver (the new CLPS711x LCD support driver is still available) - misc fixes (Jia-Ju Bai, Gustavo A. R. Silva) - misc cleanups (Mehdi Bounya, Nathan Chancellor, YueHaibing)" * tag 'fbdev-v4.20' of https://github.com/bzolnier/linux: (22 commits) video: fbdev: remove redundant 'default n' from Kconfig-s video: fbdev: remove dead old CLPS711x LCD support driver Revert "video: ssd1307fb: Do not hard code active-low reset sequence" video: fbdev: arcfb: mark expected switch fall-through pxa168fb: remove set but not used variables 'mi' video: ssd1307fb: Do not hard code active-low reset sequence video: ssd1307fb: Use gpiod_set_value_cansleep() for reset fbdev: fix broken menu dependencies video: fbdev: sis: Remove unnecessary parentheses and commented code video: fbdev: omapfb: lcd_ams_delta: use GPIO lookup table fbdev: sbuslib: integer overflow in sbusfb_ioctl_helper() fbdev: sbuslib: use checked version of put_user() fbdev: Convert to using %pOFn instead of device_node.name atmel_lcdfb: support native-mode display-timings Video: vgastate: fixed a spacing coding style atyfb: fix debugging printks mach64: optimize wait_for_fifo mach64: fix image corruption due to reading accelerator registers mach64: fix display corruption on big endian machines mach64: detect the dot clock divider correctly on sparc ...hifive-unleashed-5.1
Linus Torvalds
commit
a9ac6cc47b
|
|
@ -2,6 +2,12 @@
|
|||
# fbdev configuration
|
||||
#
|
||||
|
||||
config FB_CMDLINE
|
||||
bool
|
||||
|
||||
config FB_NOTIFY
|
||||
bool
|
||||
|
||||
menuconfig FB
|
||||
tristate "Support for frame buffer devices"
|
||||
select FB_CMDLINE
|
||||
|
|
@ -41,7 +47,6 @@ menuconfig FB
|
|||
config FIRMWARE_EDID
|
||||
bool "Enable firmware EDID"
|
||||
depends on FB
|
||||
default n
|
||||
---help---
|
||||
This enables access to the EDID transferred from the firmware.
|
||||
On the i386, this is from the Video BIOS. Enable this if DDC/I2C
|
||||
|
|
@ -54,23 +59,15 @@ config FIRMWARE_EDID
|
|||
combination with certain motherboards and monitors are known to
|
||||
suffer from this problem.
|
||||
|
||||
config FB_CMDLINE
|
||||
bool
|
||||
|
||||
config FB_NOTIFY
|
||||
bool
|
||||
|
||||
config FB_DDC
|
||||
tristate
|
||||
depends on FB
|
||||
select I2C_ALGOBIT
|
||||
select I2C
|
||||
default n
|
||||
|
||||
config FB_BOOT_VESA_SUPPORT
|
||||
bool
|
||||
depends on FB
|
||||
default n
|
||||
---help---
|
||||
If true, at least one selected framebuffer driver can take advantage
|
||||
of VESA video modes set at an early boot stage via the vga= parameter.
|
||||
|
|
@ -78,7 +75,6 @@ config FB_BOOT_VESA_SUPPORT
|
|||
config FB_CFB_FILLRECT
|
||||
tristate
|
||||
depends on FB
|
||||
default n
|
||||
---help---
|
||||
Include the cfb_fillrect function for generic software rectangle
|
||||
filling. This is used by drivers that don't provide their own
|
||||
|
|
@ -87,7 +83,6 @@ config FB_CFB_FILLRECT
|
|||
config FB_CFB_COPYAREA
|
||||
tristate
|
||||
depends on FB
|
||||
default n
|
||||
---help---
|
||||
Include the cfb_copyarea function for generic software area copying.
|
||||
This is used by drivers that don't provide their own (accelerated)
|
||||
|
|
@ -96,7 +91,6 @@ config FB_CFB_COPYAREA
|
|||
config FB_CFB_IMAGEBLIT
|
||||
tristate
|
||||
depends on FB
|
||||
default n
|
||||
---help---
|
||||
Include the cfb_imageblit function for generic software image
|
||||
blitting. This is used by drivers that don't provide their own
|
||||
|
|
@ -105,7 +99,6 @@ config FB_CFB_IMAGEBLIT
|
|||
config FB_CFB_REV_PIXELS_IN_BYTE
|
||||
bool
|
||||
depends on FB
|
||||
default n
|
||||
---help---
|
||||
Allow generic frame-buffer functions to work on displays with 1, 2
|
||||
and 4 bits per pixel depths which has opposite order of pixels in
|
||||
|
|
@ -114,7 +107,6 @@ config FB_CFB_REV_PIXELS_IN_BYTE
|
|||
config FB_SYS_FILLRECT
|
||||
tristate
|
||||
depends on FB
|
||||
default n
|
||||
---help---
|
||||
Include the sys_fillrect function for generic software rectangle
|
||||
filling. This is used by drivers that don't provide their own
|
||||
|
|
@ -123,7 +115,6 @@ config FB_SYS_FILLRECT
|
|||
config FB_SYS_COPYAREA
|
||||
tristate
|
||||
depends on FB
|
||||
default n
|
||||
---help---
|
||||
Include the sys_copyarea function for generic software area copying.
|
||||
This is used by drivers that don't provide their own (accelerated)
|
||||
|
|
@ -132,7 +123,6 @@ config FB_SYS_COPYAREA
|
|||
config FB_SYS_IMAGEBLIT
|
||||
tristate
|
||||
depends on FB
|
||||
default n
|
||||
---help---
|
||||
Include the sys_imageblit function for generic software image
|
||||
blitting. This is used by drivers that don't provide their own
|
||||
|
|
@ -141,7 +131,6 @@ config FB_SYS_IMAGEBLIT
|
|||
config FB_PROVIDE_GET_FB_UNMAPPED_AREA
|
||||
bool
|
||||
depends on FB
|
||||
default n
|
||||
---help---
|
||||
Allow generic frame-buffer to provide get_fb_unmapped_area
|
||||
function.
|
||||
|
|
@ -173,7 +162,6 @@ endchoice
|
|||
config FB_SYS_FOPS
|
||||
tristate
|
||||
depends on FB
|
||||
default n
|
||||
|
||||
config FB_DEFERRED_IO
|
||||
bool
|
||||
|
|
@ -187,7 +175,6 @@ config FB_HECUBA
|
|||
config FB_SVGALIB
|
||||
tristate
|
||||
depends on FB
|
||||
default n
|
||||
---help---
|
||||
Common utility functions useful to fbdev drivers of VGA-based
|
||||
cards.
|
||||
|
|
@ -195,19 +182,16 @@ config FB_SVGALIB
|
|||
config FB_MACMODES
|
||||
tristate
|
||||
depends on FB
|
||||
default n
|
||||
|
||||
config FB_BACKLIGHT
|
||||
bool
|
||||
depends on FB
|
||||
select BACKLIGHT_LCD_SUPPORT
|
||||
select BACKLIGHT_CLASS_DEVICE
|
||||
default n
|
||||
|
||||
config FB_MODE_HELPERS
|
||||
bool "Enable Video Mode Handling Helpers"
|
||||
depends on FB
|
||||
default n
|
||||
---help---
|
||||
This enables functions for handling video modes using the
|
||||
Generalized Timing Formula and the EDID parser. A few drivers rely
|
||||
|
|
@ -218,7 +202,6 @@ config FB_MODE_HELPERS
|
|||
config FB_TILEBLITTING
|
||||
bool "Enable Tile Blitting Support"
|
||||
depends on FB
|
||||
default n
|
||||
---help---
|
||||
This enables tile blitting. Tile blitting is a drawing technique
|
||||
where the screen is divided into rectangular sections (tiles), whereas
|
||||
|
|
@ -329,16 +312,9 @@ config FB_ACORN
|
|||
hardware found in Acorn RISC PCs and other ARM-based machines. If
|
||||
unsure, say N.
|
||||
|
||||
config FB_CLPS711X_OLD
|
||||
tristate
|
||||
select FB_CFB_FILLRECT
|
||||
select FB_CFB_COPYAREA
|
||||
select FB_CFB_IMAGEBLIT
|
||||
|
||||
config FB_CLPS711X
|
||||
tristate "CLPS711X LCD support"
|
||||
depends on FB && (ARCH_CLPS711X || COMPILE_TEST)
|
||||
select FB_CLPS711X_OLD if ARCH_CLPS711X && !ARCH_MULTIPLATFORM
|
||||
select BACKLIGHT_LCD_SUPPORT
|
||||
select FB_MODE_HELPERS
|
||||
select FB_SYS_FILLRECT
|
||||
|
|
@ -936,7 +912,6 @@ config FB_NVIDIA_I2C
|
|||
config FB_NVIDIA_DEBUG
|
||||
bool "Lots of debug output"
|
||||
depends on FB_NVIDIA
|
||||
default n
|
||||
help
|
||||
Say Y here if you want the nVidia driver to output all sorts
|
||||
of debugging information to provide to the maintainer when
|
||||
|
|
@ -983,7 +958,6 @@ config FB_RIVA_I2C
|
|||
config FB_RIVA_DEBUG
|
||||
bool "Lots of debug output"
|
||||
depends on FB_RIVA
|
||||
default n
|
||||
help
|
||||
Say Y here if you want the Riva driver to output all sorts
|
||||
of debugging information to provide to the maintainer when
|
||||
|
|
@ -1266,7 +1240,6 @@ config FB_RADEON_BACKLIGHT
|
|||
config FB_RADEON_DEBUG
|
||||
bool "Lots of debug output from Radeon driver"
|
||||
depends on FB_RADEON
|
||||
default n
|
||||
help
|
||||
Say Y here if you want the Radeon driver to output all sorts
|
||||
of debugging information to provide to the maintainer when
|
||||
|
|
@ -1399,7 +1372,6 @@ config FB_SAVAGE_I2C
|
|||
config FB_SAVAGE_ACCEL
|
||||
bool "Enable Console Acceleration"
|
||||
depends on FB_SAVAGE
|
||||
default n
|
||||
help
|
||||
This option will compile in console acceleration support. If
|
||||
the resulting framebuffer console has bothersome glitches, then
|
||||
|
|
@ -1456,8 +1428,6 @@ if FB_VIA
|
|||
|
||||
config FB_VIA_DIRECT_PROCFS
|
||||
bool "direct hardware access via procfs (DEPRECATED)(DANGEROUS)"
|
||||
depends on FB_VIA
|
||||
default n
|
||||
help
|
||||
Allow direct hardware access to some output registers via procfs.
|
||||
This is dangerous but may provide the only chance to get the
|
||||
|
|
@ -1466,8 +1436,6 @@ config FB_VIA_DIRECT_PROCFS
|
|||
|
||||
config FB_VIA_X_COMPATIBILITY
|
||||
bool "X server compatibility"
|
||||
depends on FB_VIA
|
||||
default n
|
||||
help
|
||||
This option reduces the functionality (power saving, ...) of the
|
||||
framebuffer to avoid negative impact on the OpenChrome X server.
|
||||
|
|
@ -1692,7 +1660,6 @@ config FB_WM8505
|
|||
config FB_WMT_GE_ROPS
|
||||
bool "VT8500/WM8xxx accelerated raster ops support"
|
||||
depends on (FB = y) && (FB_VT8500 || FB_WM8505)
|
||||
default n
|
||||
help
|
||||
This adds support for accelerated raster operations on the
|
||||
VIA VT8500 and Wondermedia 85xx series SoCs.
|
||||
|
|
@ -1802,17 +1769,14 @@ config FB_PXA
|
|||
|
||||
config FB_PXA_OVERLAY
|
||||
bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
|
||||
default n
|
||||
depends on FB_PXA && (PXA27x || PXA3xx)
|
||||
|
||||
config FB_PXA_SMARTPANEL
|
||||
bool "PXA Smartpanel LCD support"
|
||||
default n
|
||||
depends on FB_PXA
|
||||
|
||||
config FB_PXA_PARAMETERS
|
||||
bool "PXA LCD command line parameters"
|
||||
default n
|
||||
depends on FB_PXA
|
||||
---help---
|
||||
Enable the use of kernel command line or module parameters
|
||||
|
|
@ -1850,7 +1814,6 @@ config FB_MBX
|
|||
config FB_MBX_DEBUG
|
||||
bool "Enable debugging info via debugfs"
|
||||
depends on FB_MBX && DEBUG_FS
|
||||
default n
|
||||
---help---
|
||||
Enable this if you want debugging information using the debug
|
||||
filesystem (debugfs)
|
||||
|
|
@ -2240,7 +2203,7 @@ config FB_MX3
|
|||
|
||||
config FB_BROADSHEET
|
||||
tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
|
||||
depends on FB
|
||||
depends on FB && (ARCH_PXA || COMPILE_TEST)
|
||||
select FB_SYS_FILLRECT
|
||||
select FB_SYS_COPYAREA
|
||||
select FB_SYS_IMAGEBLIT
|
||||
|
|
@ -2308,10 +2271,6 @@ config FB_SIMPLE
|
|||
Configuration re: surface address, size, and format must be provided
|
||||
through device tree, or plain old platform data.
|
||||
|
||||
source "drivers/video/fbdev/omap/Kconfig"
|
||||
source "drivers/video/fbdev/omap2/Kconfig"
|
||||
source "drivers/video/fbdev/mmp/Kconfig"
|
||||
|
||||
config FB_SSD1307
|
||||
tristate "Solomon SSD1307 framebuffer support"
|
||||
depends on FB && I2C
|
||||
|
|
@ -2341,3 +2300,7 @@ config FB_SM712
|
|||
This driver is also available as a module. The module will be
|
||||
called sm712fb. If you want to compile it as a module, say M
|
||||
here and read <file:Documentation/kbuild/modules.txt>.
|
||||
|
||||
source "drivers/video/fbdev/omap/Kconfig"
|
||||
source "drivers/video/fbdev/omap2/Kconfig"
|
||||
source "drivers/video/fbdev/mmp/Kconfig"
|
||||
|
|
|
|||
|
|
@ -14,7 +14,6 @@ obj-$(CONFIG_FB_WMT_GE_ROPS) += wmt_ge_rops.o
|
|||
obj-$(CONFIG_FB_AMIGA) += amifb.o c2p_planar.o
|
||||
obj-$(CONFIG_FB_ARC) += arcfb.o
|
||||
obj-$(CONFIG_FB_CLPS711X) += clps711x-fb.o
|
||||
obj-$(CONFIG_FB_CLPS711X_OLD) += clps711xfb.o
|
||||
obj-$(CONFIG_FB_CYBER2000) += cyber2000fb.o
|
||||
obj-$(CONFIG_FB_GRVGA) += grvga.o
|
||||
obj-$(CONFIG_FB_PM2) += pm2fb.o
|
||||
|
|
|
|||
|
|
@ -419,6 +419,8 @@ static int arcfb_ioctl(struct fb_info *info,
|
|||
schedule();
|
||||
finish_wait(&arcfb_waitq, &wait);
|
||||
}
|
||||
/* fall through */
|
||||
|
||||
case FBIO_GETCONTROL2:
|
||||
{
|
||||
unsigned char ctl2;
|
||||
|
|
|
|||
|
|
@ -22,6 +22,7 @@
|
|||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <video/of_videomode.h>
|
||||
#include <video/of_display_timing.h>
|
||||
#include <linux/regulator/consumer.h>
|
||||
#include <video/videomode.h>
|
||||
|
|
@ -1028,11 +1029,11 @@ static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo)
|
|||
struct device *dev = &sinfo->pdev->dev;
|
||||
struct device_node *np =dev->of_node;
|
||||
struct device_node *display_np;
|
||||
struct device_node *timings_np;
|
||||
struct display_timings *timings;
|
||||
struct atmel_lcdfb_power_ctrl_gpio *og;
|
||||
bool is_gpio_power = false;
|
||||
struct fb_videomode fb_vm;
|
||||
struct gpio_desc *gpiod;
|
||||
struct videomode vm;
|
||||
int ret = -ENOENT;
|
||||
int i;
|
||||
|
||||
|
|
@ -1105,44 +1106,18 @@ static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo)
|
|||
pdata->lcdcon_is_backlight = of_property_read_bool(display_np, "atmel,lcdcon-backlight");
|
||||
pdata->lcdcon_pol_negative = of_property_read_bool(display_np, "atmel,lcdcon-backlight-inverted");
|
||||
|
||||
timings = of_get_display_timings(display_np);
|
||||
if (!timings) {
|
||||
dev_err(dev, "failed to get display timings\n");
|
||||
ret = -EINVAL;
|
||||
ret = of_get_videomode(display_np, &vm, OF_USE_NATIVE_MODE);
|
||||
if (ret) {
|
||||
dev_err(dev, "failed to get videomode from DT\n");
|
||||
goto put_display_node;
|
||||
}
|
||||
|
||||
timings_np = of_get_child_by_name(display_np, "display-timings");
|
||||
if (!timings_np) {
|
||||
dev_err(dev, "failed to find display-timings node\n");
|
||||
ret = -ENODEV;
|
||||
ret = fb_videomode_from_videomode(&vm, &fb_vm);
|
||||
if (ret < 0)
|
||||
goto put_display_node;
|
||||
}
|
||||
|
||||
for (i = 0; i < of_get_child_count(timings_np); i++) {
|
||||
struct videomode vm;
|
||||
struct fb_videomode fb_vm;
|
||||
fb_add_videomode(&fb_vm, &info->modelist);
|
||||
|
||||
ret = videomode_from_timings(timings, &vm, i);
|
||||
if (ret < 0)
|
||||
goto put_timings_node;
|
||||
ret = fb_videomode_from_videomode(&vm, &fb_vm);
|
||||
if (ret < 0)
|
||||
goto put_timings_node;
|
||||
|
||||
fb_add_videomode(&fb_vm, &info->modelist);
|
||||
}
|
||||
|
||||
/*
|
||||
* FIXME: Make sure we are not referencing any fields in display_np
|
||||
* and timings_np and drop our references to them before returning to
|
||||
* avoid leaking the nodes on probe deferral and driver unbind.
|
||||
*/
|
||||
|
||||
return 0;
|
||||
|
||||
put_timings_node:
|
||||
of_node_put(timings_np);
|
||||
put_display_node:
|
||||
of_node_put(display_np);
|
||||
return ret;
|
||||
|
|
|
|||
|
|
@ -147,6 +147,7 @@ struct atyfb_par {
|
|||
u16 pci_id;
|
||||
u32 accel_flags;
|
||||
int blitter_may_be_busy;
|
||||
unsigned fifo_space;
|
||||
int asleep;
|
||||
int lock_blank;
|
||||
unsigned long res_start;
|
||||
|
|
@ -346,10 +347,13 @@ extern int aty_init_cursor(struct fb_info *info);
|
|||
* Hardware acceleration
|
||||
*/
|
||||
|
||||
static inline void wait_for_fifo(u16 entries, const struct atyfb_par *par)
|
||||
static inline void wait_for_fifo(u16 entries, struct atyfb_par *par)
|
||||
{
|
||||
while ((aty_ld_le32(FIFO_STAT, par) & 0xffff) >
|
||||
((u32) (0x8000 >> entries)));
|
||||
unsigned fifo_space = par->fifo_space;
|
||||
while (entries > fifo_space) {
|
||||
fifo_space = 16 - fls(aty_ld_le32(FIFO_STAT, par) & 0xffff);
|
||||
}
|
||||
par->fifo_space = fifo_space - entries;
|
||||
}
|
||||
|
||||
static inline void wait_for_idle(struct atyfb_par *par)
|
||||
|
|
@ -359,7 +363,7 @@ static inline void wait_for_idle(struct atyfb_par *par)
|
|||
par->blitter_may_be_busy = 0;
|
||||
}
|
||||
|
||||
extern void aty_reset_engine(const struct atyfb_par *par);
|
||||
extern void aty_reset_engine(struct atyfb_par *par);
|
||||
extern void aty_init_engine(struct atyfb_par *par, struct fb_info *info);
|
||||
|
||||
void atyfb_copyarea(struct fb_info *info, const struct fb_copyarea *area);
|
||||
|
|
|
|||
|
|
@ -1480,24 +1480,28 @@ static int atyfb_set_par(struct fb_info *info)
|
|||
base = 0x2000;
|
||||
printk("debug atyfb: Mach64 non-shadow register values:");
|
||||
for (i = 0; i < 256; i = i+4) {
|
||||
if (i % 16 == 0)
|
||||
printk("\ndebug atyfb: 0x%04X: ", base + i);
|
||||
printk(" %08X", aty_ld_le32(i, par));
|
||||
if (i % 16 == 0) {
|
||||
pr_cont("\n");
|
||||
printk("debug atyfb: 0x%04X: ", base + i);
|
||||
}
|
||||
pr_cont(" %08X", aty_ld_le32(i, par));
|
||||
}
|
||||
printk("\n\n");
|
||||
pr_cont("\n\n");
|
||||
|
||||
#ifdef CONFIG_FB_ATY_CT
|
||||
/* PLL registers */
|
||||
base = 0x00;
|
||||
printk("debug atyfb: Mach64 PLL register values:");
|
||||
for (i = 0; i < 64; i++) {
|
||||
if (i % 16 == 0)
|
||||
printk("\ndebug atyfb: 0x%02X: ", base + i);
|
||||
if (i % 16 == 0) {
|
||||
pr_cont("\n");
|
||||
printk("debug atyfb: 0x%02X: ", base + i);
|
||||
}
|
||||
if (i % 4 == 0)
|
||||
printk(" ");
|
||||
printk("%02X", aty_ld_pll_ct(i, par));
|
||||
pr_cont(" ");
|
||||
pr_cont("%02X", aty_ld_pll_ct(i, par));
|
||||
}
|
||||
printk("\n\n");
|
||||
pr_cont("\n\n");
|
||||
#endif /* CONFIG_FB_ATY_CT */
|
||||
|
||||
#ifdef CONFIG_FB_ATY_GENERIC_LCD
|
||||
|
|
@ -1509,19 +1513,19 @@ static int atyfb_set_par(struct fb_info *info)
|
|||
for (i = 0; i <= POWER_MANAGEMENT; i++) {
|
||||
if (i == EXT_VERT_STRETCH)
|
||||
continue;
|
||||
printk("\ndebug atyfb: 0x%04X: ",
|
||||
pr_cont("\ndebug atyfb: 0x%04X: ",
|
||||
lt_lcd_regs[i]);
|
||||
printk(" %08X", aty_ld_lcd(i, par));
|
||||
pr_cont(" %08X", aty_ld_lcd(i, par));
|
||||
}
|
||||
} else {
|
||||
for (i = 0; i < 64; i++) {
|
||||
if (i % 4 == 0)
|
||||
printk("\ndebug atyfb: 0x%02X: ",
|
||||
pr_cont("\ndebug atyfb: 0x%02X: ",
|
||||
base + i);
|
||||
printk(" %08X", aty_ld_lcd(i, par));
|
||||
pr_cont(" %08X", aty_ld_lcd(i, par));
|
||||
}
|
||||
}
|
||||
printk("\n\n");
|
||||
pr_cont("\n\n");
|
||||
}
|
||||
#endif /* CONFIG_FB_ATY_GENERIC_LCD */
|
||||
}
|
||||
|
|
@ -2597,8 +2601,8 @@ static int aty_init(struct fb_info *info)
|
|||
aty_ld_le32(DSP_ON_OFF, par),
|
||||
aty_ld_le32(CLOCK_CNTL, par));
|
||||
for (i = 0; i < 40; i++)
|
||||
printk(" %02x", aty_ld_pll_ct(i, par));
|
||||
printk("\n");
|
||||
pr_cont(" %02x", aty_ld_pll_ct(i, par));
|
||||
pr_cont("\n");
|
||||
}
|
||||
#endif
|
||||
if (par->pll_ops->init_pll)
|
||||
|
|
|
|||
|
|
@ -37,7 +37,7 @@ static u32 rotation24bpp(u32 dx, u32 direction)
|
|||
return ((rotation << 8) | DST_24_ROTATION_ENABLE);
|
||||
}
|
||||
|
||||
void aty_reset_engine(const struct atyfb_par *par)
|
||||
void aty_reset_engine(struct atyfb_par *par)
|
||||
{
|
||||
/* reset engine */
|
||||
aty_st_le32(GEN_TEST_CNTL,
|
||||
|
|
@ -50,6 +50,8 @@ void aty_reset_engine(const struct atyfb_par *par)
|
|||
/* HOST errors */
|
||||
aty_st_le32(BUS_CNTL,
|
||||
aty_ld_le32(BUS_CNTL, par) | BUS_HOST_ERR_ACK | BUS_FIFO_ERR_ACK, par);
|
||||
|
||||
par->fifo_space = 0;
|
||||
}
|
||||
|
||||
static void reset_GTC_3D_engine(const struct atyfb_par *par)
|
||||
|
|
@ -127,7 +129,7 @@ void aty_init_engine(struct atyfb_par *par, struct fb_info *info)
|
|||
|
||||
/* set host attributes */
|
||||
wait_for_fifo(13, par);
|
||||
aty_st_le32(HOST_CNTL, 0, par);
|
||||
aty_st_le32(HOST_CNTL, HOST_BYTE_ALIGN, par);
|
||||
|
||||
/* set pattern attributes */
|
||||
aty_st_le32(PAT_REG0, 0, par);
|
||||
|
|
@ -233,7 +235,8 @@ void atyfb_copyarea(struct fb_info *info, const struct fb_copyarea *area)
|
|||
rotation = rotation24bpp(dx, direction);
|
||||
}
|
||||
|
||||
wait_for_fifo(4, par);
|
||||
wait_for_fifo(5, par);
|
||||
aty_st_le32(DP_PIX_WIDTH, par->crtc.dp_pix_width, par);
|
||||
aty_st_le32(DP_SRC, FRGD_SRC_BLIT, par);
|
||||
aty_st_le32(SRC_Y_X, (sx << 16) | sy, par);
|
||||
aty_st_le32(SRC_HEIGHT1_WIDTH1, (width << 16) | area->height, par);
|
||||
|
|
@ -269,7 +272,8 @@ void atyfb_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
|
|||
rotation = rotation24bpp(dx, DST_X_LEFT_TO_RIGHT);
|
||||
}
|
||||
|
||||
wait_for_fifo(3, par);
|
||||
wait_for_fifo(4, par);
|
||||
aty_st_le32(DP_PIX_WIDTH, par->crtc.dp_pix_width, par);
|
||||
aty_st_le32(DP_FRGD_CLR, color, par);
|
||||
aty_st_le32(DP_SRC,
|
||||
BKGD_SRC_BKGD_CLR | FRGD_SRC_FRGD_CLR | MONO_SRC_ONE,
|
||||
|
|
@ -284,7 +288,7 @@ void atyfb_imageblit(struct fb_info *info, const struct fb_image *image)
|
|||
{
|
||||
struct atyfb_par *par = (struct atyfb_par *) info->par;
|
||||
u32 src_bytes, dx = image->dx, dy = image->dy, width = image->width;
|
||||
u32 pix_width_save, pix_width, host_cntl, rotation = 0, src, mix;
|
||||
u32 pix_width, rotation = 0, src, mix;
|
||||
|
||||
if (par->asleep)
|
||||
return;
|
||||
|
|
@ -296,8 +300,7 @@ void atyfb_imageblit(struct fb_info *info, const struct fb_image *image)
|
|||
return;
|
||||
}
|
||||
|
||||
pix_width = pix_width_save = aty_ld_le32(DP_PIX_WIDTH, par);
|
||||
host_cntl = aty_ld_le32(HOST_CNTL, par) | HOST_BYTE_ALIGN;
|
||||
pix_width = par->crtc.dp_pix_width;
|
||||
|
||||
switch (image->depth) {
|
||||
case 1:
|
||||
|
|
@ -345,7 +348,7 @@ void atyfb_imageblit(struct fb_info *info, const struct fb_image *image)
|
|||
* since Rage 3D IIc we have DP_HOST_TRIPLE_EN bit
|
||||
* this hwaccelerated triple has an issue with not aligned data
|
||||
*/
|
||||
if (M64_HAS(HW_TRIPLE) && image->width % 8 == 0)
|
||||
if (image->depth == 1 && M64_HAS(HW_TRIPLE) && image->width % 8 == 0)
|
||||
pix_width |= DP_HOST_TRIPLE_EN;
|
||||
}
|
||||
|
||||
|
|
@ -370,19 +373,18 @@ void atyfb_imageblit(struct fb_info *info, const struct fb_image *image)
|
|||
mix = FRGD_MIX_D_XOR_S | BKGD_MIX_D;
|
||||
}
|
||||
|
||||
wait_for_fifo(6, par);
|
||||
aty_st_le32(DP_WRITE_MASK, 0xFFFFFFFF, par);
|
||||
wait_for_fifo(5, par);
|
||||
aty_st_le32(DP_PIX_WIDTH, pix_width, par);
|
||||
aty_st_le32(DP_MIX, mix, par);
|
||||
aty_st_le32(DP_SRC, src, par);
|
||||
aty_st_le32(HOST_CNTL, host_cntl, par);
|
||||
aty_st_le32(HOST_CNTL, HOST_BYTE_ALIGN, par);
|
||||
aty_st_le32(DST_CNTL, DST_Y_TOP_TO_BOTTOM | DST_X_LEFT_TO_RIGHT | rotation, par);
|
||||
|
||||
draw_rect(dx, dy, width, image->height, par);
|
||||
src_bytes = (((image->width * image->depth) + 7) / 8) * image->height;
|
||||
|
||||
/* manual triple each pixel */
|
||||
if (info->var.bits_per_pixel == 24 && !(pix_width & DP_HOST_TRIPLE_EN)) {
|
||||
if (image->depth == 1 && info->var.bits_per_pixel == 24 && !(pix_width & DP_HOST_TRIPLE_EN)) {
|
||||
int inbit, outbit, mult24, byte_id_in_dword, width;
|
||||
u8 *pbitmapin = (u8*)image->data, *pbitmapout;
|
||||
u32 hostdword;
|
||||
|
|
@ -415,7 +417,7 @@ void atyfb_imageblit(struct fb_info *info, const struct fb_image *image)
|
|||
}
|
||||
}
|
||||
wait_for_fifo(1, par);
|
||||
aty_st_le32(HOST_DATA0, hostdword, par);
|
||||
aty_st_le32(HOST_DATA0, le32_to_cpu(hostdword), par);
|
||||
}
|
||||
} else {
|
||||
u32 *pbitmap, dwords = (src_bytes + 3) / 4;
|
||||
|
|
@ -424,8 +426,4 @@ void atyfb_imageblit(struct fb_info *info, const struct fb_image *image)
|
|||
aty_st_le32(HOST_DATA0, get_unaligned_le32(pbitmap), par);
|
||||
}
|
||||
}
|
||||
|
||||
/* restore pix_width */
|
||||
wait_for_fifo(1, par);
|
||||
aty_st_le32(DP_PIX_WIDTH, pix_width_save, par);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -355,9 +355,7 @@ static int cg14_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
|
|||
static void cg14_init_fix(struct fb_info *info, int linebytes,
|
||||
struct device_node *dp)
|
||||
{
|
||||
const char *name = dp->name;
|
||||
|
||||
strlcpy(info->fix.id, name, sizeof(info->fix.id));
|
||||
snprintf(info->fix.id, sizeof(info->fix.id), "%pOFn", dp);
|
||||
|
||||
info->fix.type = FB_TYPE_PACKED_PIXELS;
|
||||
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
|
||||
|
|
|
|||
|
|
@ -246,7 +246,7 @@ static int cg3_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
|
|||
static void cg3_init_fix(struct fb_info *info, int linebytes,
|
||||
struct device_node *dp)
|
||||
{
|
||||
strlcpy(info->fix.id, dp->name, sizeof(info->fix.id));
|
||||
snprintf(info->fix.id, sizeof(info->fix.id), "%pOFn", dp);
|
||||
|
||||
info->fix.type = FB_TYPE_PACKED_PIXELS;
|
||||
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
|
||||
|
|
|
|||
|
|
@ -1,314 +0,0 @@
|
|||
/*
|
||||
* linux/drivers/video/clps711xfb.c
|
||||
*
|
||||
* Copyright (C) 2000-2001 Deep Blue Solutions Ltd.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*
|
||||
* Framebuffer driver for the CLPS7111 and EP7212 processors.
|
||||
*/
|
||||
#include <linux/mm.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/fb.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <asm/mach-types.h>
|
||||
#include <linux/uaccess.h>
|
||||
|
||||
struct fb_info *cfb;
|
||||
|
||||
#define CMAP_MAX_SIZE 16
|
||||
|
||||
/*
|
||||
* LCD AC Prescale. This comes from the LCD panel manufacturers specifications.
|
||||
* This determines how many clocks + 1 of CL1 before the M signal toggles.
|
||||
* The number of lines on the display must not be divisible by this number.
|
||||
*/
|
||||
static unsigned int lcd_ac_prescale = 13;
|
||||
|
||||
/*
|
||||
* Set a single color register. Return != 0 for invalid regno.
|
||||
*/
|
||||
static int
|
||||
clps7111fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
|
||||
u_int transp, struct fb_info *info)
|
||||
{
|
||||
unsigned int level, mask, shift, pal;
|
||||
|
||||
if (regno >= (1 << info->var.bits_per_pixel))
|
||||
return 1;
|
||||
|
||||
/* gray = 0.30*R + 0.58*G + 0.11*B */
|
||||
level = (red * 77 + green * 151 + blue * 28) >> 20;
|
||||
|
||||
/*
|
||||
* On an LCD, a high value is dark, while a low value is light.
|
||||
* So we invert the level.
|
||||
*
|
||||
* This isn't true on all machines, so we only do it on EDB7211.
|
||||
* --rmk
|
||||
*/
|
||||
if (machine_is_edb7211()) {
|
||||
level = 15 - level;
|
||||
}
|
||||
|
||||
shift = 4 * (regno & 7);
|
||||
level <<= shift;
|
||||
mask = 15 << shift;
|
||||
level &= mask;
|
||||
|
||||
regno = regno < 8 ? PALLSW : PALMSW;
|
||||
|
||||
pal = clps_readl(regno);
|
||||
pal = (pal & ~mask) | level;
|
||||
clps_writel(pal, regno);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Validate the purposed mode.
|
||||
*/
|
||||
static int
|
||||
clps7111fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
|
||||
{
|
||||
var->transp.msb_right = 0;
|
||||
var->transp.offset = 0;
|
||||
var->transp.length = 0;
|
||||
var->red.msb_right = 0;
|
||||
var->red.offset = 0;
|
||||
var->red.length = var->bits_per_pixel;
|
||||
var->green = var->red;
|
||||
var->blue = var->red;
|
||||
|
||||
if (var->bits_per_pixel > 4)
|
||||
return -EINVAL;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Set the hardware state.
|
||||
*/
|
||||
static int
|
||||
clps7111fb_set_par(struct fb_info *info)
|
||||
{
|
||||
unsigned int lcdcon, syscon, pixclock;
|
||||
|
||||
switch (info->var.bits_per_pixel) {
|
||||
case 1:
|
||||
info->fix.visual = FB_VISUAL_MONO01;
|
||||
break;
|
||||
case 2:
|
||||
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
|
||||
break;
|
||||
case 4:
|
||||
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
|
||||
break;
|
||||
}
|
||||
|
||||
info->fix.line_length = info->var.xres_virtual * info->var.bits_per_pixel / 8;
|
||||
|
||||
lcdcon = (info->var.xres_virtual * info->var.yres_virtual * info->var.bits_per_pixel) / 128 - 1;
|
||||
lcdcon |= ((info->var.xres_virtual / 16) - 1) << 13;
|
||||
lcdcon |= lcd_ac_prescale << 25;
|
||||
|
||||
/*
|
||||
* Calculate pixel prescale value from the pixclock. This is:
|
||||
* 36.864MHz / pixclock_mhz - 1.
|
||||
* However, pixclock is in picoseconds, so this ends up being:
|
||||
* 36864000 * pixclock_ps / 10^12 - 1
|
||||
* and this will overflow the 32-bit math. We perform this as
|
||||
* (9 * 4096000 == 36864000):
|
||||
* pixclock_ps * 9 * (4096000 / 10^12) - 1
|
||||
*/
|
||||
pixclock = 9 * info->var.pixclock / 244140 - 1;
|
||||
lcdcon |= pixclock << 19;
|
||||
|
||||
if (info->var.bits_per_pixel == 4)
|
||||
lcdcon |= LCDCON_GSMD;
|
||||
if (info->var.bits_per_pixel >= 2)
|
||||
lcdcon |= LCDCON_GSEN;
|
||||
|
||||
/*
|
||||
* LCDCON must only be changed while the LCD is disabled
|
||||
*/
|
||||
syscon = clps_readl(SYSCON1);
|
||||
clps_writel(syscon & ~SYSCON1_LCDEN, SYSCON1);
|
||||
clps_writel(lcdcon, LCDCON);
|
||||
clps_writel(syscon | SYSCON1_LCDEN, SYSCON1);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int clps7111fb_blank(int blank, struct fb_info *info)
|
||||
{
|
||||
/* Enable/Disable LCD controller. */
|
||||
if (blank)
|
||||
clps_writel(clps_readl(SYSCON1) & ~SYSCON1_LCDEN, SYSCON1);
|
||||
else
|
||||
clps_writel(clps_readl(SYSCON1) | SYSCON1_LCDEN, SYSCON1);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct fb_ops clps7111fb_ops = {
|
||||
.owner = THIS_MODULE,
|
||||
.fb_check_var = clps7111fb_check_var,
|
||||
.fb_set_par = clps7111fb_set_par,
|
||||
.fb_setcolreg = clps7111fb_setcolreg,
|
||||
.fb_blank = clps7111fb_blank,
|
||||
.fb_fillrect = cfb_fillrect,
|
||||
.fb_copyarea = cfb_copyarea,
|
||||
.fb_imageblit = cfb_imageblit,
|
||||
};
|
||||
|
||||
static void clps711x_guess_lcd_params(struct fb_info *info)
|
||||
{
|
||||
unsigned int lcdcon, syscon, size;
|
||||
unsigned long phys_base = PAGE_OFFSET;
|
||||
void *virt_base = (void *)PAGE_OFFSET;
|
||||
|
||||
info->var.xres_virtual = 640;
|
||||
info->var.yres_virtual = 240;
|
||||
info->var.bits_per_pixel = 4;
|
||||
info->var.activate = FB_ACTIVATE_NOW;
|
||||
info->var.height = -1;
|
||||
info->var.width = -1;
|
||||
info->var.pixclock = 93006; /* 10.752MHz pixel clock */
|
||||
|
||||
/*
|
||||
* If the LCD controller is already running, decode the values
|
||||
* in LCDCON to xres/yres/bpp/pixclock/acprescale
|
||||
*/
|
||||
syscon = clps_readl(SYSCON1);
|
||||
if (syscon & SYSCON1_LCDEN) {
|
||||
lcdcon = clps_readl(LCDCON);
|
||||
|
||||
/*
|
||||
* Decode GSMD and GSEN bits to bits per pixel
|
||||
*/
|
||||
switch (lcdcon & (LCDCON_GSMD | LCDCON_GSEN)) {
|
||||
case LCDCON_GSMD | LCDCON_GSEN:
|
||||
info->var.bits_per_pixel = 4;
|
||||
break;
|
||||
|
||||
case LCDCON_GSEN:
|
||||
info->var.bits_per_pixel = 2;
|
||||
break;
|
||||
|
||||
default:
|
||||
info->var.bits_per_pixel = 1;
|
||||
break;
|
||||
}
|
||||
|
||||
/*
|
||||
* Decode xres/yres
|
||||
*/
|
||||
info->var.xres_virtual = (((lcdcon >> 13) & 0x3f) + 1) * 16;
|
||||
info->var.yres_virtual = (((lcdcon & 0x1fff) + 1) * 128) /
|
||||
(info->var.xres_virtual *
|
||||
info->var.bits_per_pixel);
|
||||
|
||||
/*
|
||||
* Calculate pixclock
|
||||
*/
|
||||
info->var.pixclock = (((lcdcon >> 19) & 0x3f) + 1) * 244140 / 9;
|
||||
|
||||
/*
|
||||
* Grab AC prescale
|
||||
*/
|
||||
lcd_ac_prescale = (lcdcon >> 25) & 0x1f;
|
||||
}
|
||||
|
||||
info->var.xres = info->var.xres_virtual;
|
||||
info->var.yres = info->var.yres_virtual;
|
||||
info->var.grayscale = info->var.bits_per_pixel > 1;
|
||||
|
||||
size = info->var.xres * info->var.yres * info->var.bits_per_pixel / 8;
|
||||
|
||||
/*
|
||||
* Might be worth checking to see if we can use the on-board
|
||||
* RAM if size here...
|
||||
* CLPS7110 - no on-board SRAM
|
||||
* EP7212 - 38400 bytes
|
||||
*/
|
||||
if (size <= 38400) {
|
||||
printk(KERN_INFO "CLPS711xFB: could use on-board SRAM?\n");
|
||||
}
|
||||
|
||||
if ((syscon & SYSCON1_LCDEN) == 0) {
|
||||
/*
|
||||
* The display isn't running. Ensure that
|
||||
* the display memory is empty.
|
||||
*/
|
||||
memset(virt_base, 0, size);
|
||||
}
|
||||
|
||||
info->screen_base = virt_base;
|
||||
info->fix.smem_start = phys_base;
|
||||
info->fix.smem_len = PAGE_ALIGN(size);
|
||||
info->fix.type = FB_TYPE_PACKED_PIXELS;
|
||||
}
|
||||
|
||||
static int clps711x_fb_probe(struct platform_device *pdev)
|
||||
{
|
||||
int err = -ENOMEM;
|
||||
|
||||
if (fb_get_options("clps711xfb", NULL))
|
||||
return -ENODEV;
|
||||
|
||||
cfb = kzalloc(sizeof(*cfb), GFP_KERNEL);
|
||||
if (!cfb)
|
||||
goto out;
|
||||
|
||||
strcpy(cfb->fix.id, "clps711x");
|
||||
|
||||
cfb->fbops = &clps7111fb_ops;
|
||||
cfb->flags = FBINFO_DEFAULT;
|
||||
|
||||
clps711x_guess_lcd_params(cfb);
|
||||
|
||||
fb_alloc_cmap(&cfb->cmap, CMAP_MAX_SIZE, 0);
|
||||
|
||||
err = register_framebuffer(cfb);
|
||||
|
||||
out: return err;
|
||||
}
|
||||
|
||||
static int clps711x_fb_remove(struct platform_device *pdev)
|
||||
{
|
||||
unregister_framebuffer(cfb);
|
||||
kfree(cfb);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver clps711x_fb_driver = {
|
||||
.driver = {
|
||||
.name = "video-clps711x",
|
||||
},
|
||||
.probe = clps711x_fb_probe,
|
||||
.remove = clps711x_fb_remove,
|
||||
};
|
||||
module_platform_driver(clps711x_fb_driver);
|
||||
|
||||
MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>");
|
||||
MODULE_DESCRIPTION("CLPS711X framebuffer driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
|
|
@ -1480,8 +1480,8 @@ int of_get_fb_videomode(struct device_node *np, struct fb_videomode *fb,
|
|||
if (ret)
|
||||
return ret;
|
||||
|
||||
pr_debug("%pOF: got %dx%d display mode from %s\n",
|
||||
np, vm.hactive, vm.vactive, np->name);
|
||||
pr_debug("%pOF: got %dx%d display mode\n",
|
||||
np, vm.hactive, vm.vactive);
|
||||
dump_fb_videomode(fb);
|
||||
|
||||
return 0;
|
||||
|
|
|
|||
|
|
@ -1473,7 +1473,7 @@ static int imsttfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|||
|
||||
dp = pci_device_to_OF_node(pdev);
|
||||
if(dp)
|
||||
printk(KERN_INFO "%s: OF name %s\n",__func__, dp->name);
|
||||
printk(KERN_INFO "%s: OF name %pOFn\n",__func__, dp);
|
||||
else if (IS_ENABLED(CONFIG_OF))
|
||||
printk(KERN_ERR "imsttfb: no OF node for pci device\n");
|
||||
|
||||
|
|
|
|||
|
|
@ -434,7 +434,7 @@ static int leo_ioctl(struct fb_info *info, unsigned int cmd, unsigned long arg)
|
|||
static void
|
||||
leo_init_fix(struct fb_info *info, struct device_node *dp)
|
||||
{
|
||||
strlcpy(info->fix.id, dp->name, sizeof(info->fix.id));
|
||||
snprintf(info->fix.id, sizeof(info->fix.id), "%pOFn", dp);
|
||||
|
||||
info->fix.type = FB_TYPE_PACKED_PIXELS;
|
||||
info->fix.visual = FB_VISUAL_TRUECOLOR;
|
||||
|
|
|
|||
|
|
@ -3,7 +3,6 @@ if MMP_DISP
|
|||
config MMP_DISP_CONTROLLER
|
||||
bool "mmp display controller hw support"
|
||||
depends on CPU_PXA910 || CPU_MMP2
|
||||
default n
|
||||
help
|
||||
Marvell MMP display hw controller support
|
||||
this controller is used on Marvell PXA910 and
|
||||
|
|
|
|||
|
|
@ -2,6 +2,5 @@
|
|||
config MMP_PANEL_TPOHVGA
|
||||
bool "tpohvga panel TJ032MD01BW support"
|
||||
depends on SPI_MASTER
|
||||
default n
|
||||
help
|
||||
tpohvga panel support
|
||||
|
|
|
|||
|
|
@ -419,9 +419,13 @@ static void __init offb_init_fb(const char *name,
|
|||
var = &info->var;
|
||||
info->par = par;
|
||||
|
||||
strcpy(fix->id, "OFfb ");
|
||||
strncat(fix->id, name, sizeof(fix->id) - sizeof("OFfb "));
|
||||
fix->id[sizeof(fix->id) - 1] = '\0';
|
||||
if (name) {
|
||||
strcpy(fix->id, "OFfb ");
|
||||
strncat(fix->id, name, sizeof(fix->id) - sizeof("OFfb "));
|
||||
fix->id[sizeof(fix->id) - 1] = '\0';
|
||||
} else
|
||||
snprintf(fix->id, sizeof(fix->id), "OFfb %pOFn", dp);
|
||||
|
||||
|
||||
var->xres = var->xres_virtual = width;
|
||||
var->yres = var->yres_virtual = height;
|
||||
|
|
@ -644,7 +648,7 @@ static void __init offb_init_nodriver(struct device_node *dp, int no_real_node)
|
|||
/* kludge for valkyrie */
|
||||
if (strcmp(dp->name, "valkyrie") == 0)
|
||||
address += 0x1000;
|
||||
offb_init_fb(no_real_node ? "bootx" : dp->name,
|
||||
offb_init_fb(no_real_node ? "bootx" : NULL,
|
||||
width, height, depth, pitch, address,
|
||||
foreign_endian, no_real_node ? NULL : dp);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -24,11 +24,10 @@
|
|||
#include <linux/platform_device.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/lcd.h>
|
||||
#include <linux/gpio.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/board-ams-delta.h>
|
||||
|
||||
#include "omapfb.h"
|
||||
|
||||
|
|
@ -41,6 +40,8 @@
|
|||
/* LCD class device section */
|
||||
|
||||
static int ams_delta_lcd;
|
||||
static struct gpio_desc *gpiod_vblen;
|
||||
static struct gpio_desc *gpiod_ndisp;
|
||||
|
||||
static int ams_delta_lcd_set_power(struct lcd_device *dev, int power)
|
||||
{
|
||||
|
|
@ -99,41 +100,17 @@ static struct lcd_ops ams_delta_lcd_ops = {
|
|||
|
||||
/* omapfb panel section */
|
||||
|
||||
static const struct gpio _gpios[] = {
|
||||
{
|
||||
.gpio = AMS_DELTA_GPIO_PIN_LCD_VBLEN,
|
||||
.flags = GPIOF_OUT_INIT_LOW,
|
||||
.label = "lcd_vblen",
|
||||
},
|
||||
{
|
||||
.gpio = AMS_DELTA_GPIO_PIN_LCD_NDISP,
|
||||
.flags = GPIOF_OUT_INIT_LOW,
|
||||
.label = "lcd_ndisp",
|
||||
},
|
||||
};
|
||||
|
||||
static int ams_delta_panel_init(struct lcd_panel *panel,
|
||||
struct omapfb_device *fbdev)
|
||||
{
|
||||
return gpio_request_array(_gpios, ARRAY_SIZE(_gpios));
|
||||
}
|
||||
|
||||
static void ams_delta_panel_cleanup(struct lcd_panel *panel)
|
||||
{
|
||||
gpio_free_array(_gpios, ARRAY_SIZE(_gpios));
|
||||
}
|
||||
|
||||
static int ams_delta_panel_enable(struct lcd_panel *panel)
|
||||
{
|
||||
gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_NDISP, 1);
|
||||
gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_VBLEN, 1);
|
||||
gpiod_set_value(gpiod_ndisp, 1);
|
||||
gpiod_set_value(gpiod_vblen, 1);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void ams_delta_panel_disable(struct lcd_panel *panel)
|
||||
{
|
||||
gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_VBLEN, 0);
|
||||
gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_NDISP, 0);
|
||||
gpiod_set_value(gpiod_vblen, 0);
|
||||
gpiod_set_value(gpiod_ndisp, 0);
|
||||
}
|
||||
|
||||
static struct lcd_panel ams_delta_panel = {
|
||||
|
|
@ -154,8 +131,6 @@ static struct lcd_panel ams_delta_panel = {
|
|||
.pcd = 0,
|
||||
.acb = 37,
|
||||
|
||||
.init = ams_delta_panel_init,
|
||||
.cleanup = ams_delta_panel_cleanup,
|
||||
.enable = ams_delta_panel_enable,
|
||||
.disable = ams_delta_panel_disable,
|
||||
};
|
||||
|
|
@ -166,9 +141,23 @@ static struct lcd_panel ams_delta_panel = {
|
|||
static int ams_delta_panel_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct lcd_device *lcd_device = NULL;
|
||||
#ifdef CONFIG_LCD_CLASS_DEVICE
|
||||
int ret;
|
||||
|
||||
gpiod_vblen = devm_gpiod_get(&pdev->dev, "vblen", GPIOD_OUT_LOW);
|
||||
if (IS_ERR(gpiod_vblen)) {
|
||||
ret = PTR_ERR(gpiod_vblen);
|
||||
dev_err(&pdev->dev, "VBLEN GPIO request failed (%d)\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
gpiod_ndisp = devm_gpiod_get(&pdev->dev, "ndisp", GPIOD_OUT_LOW);
|
||||
if (IS_ERR(gpiod_ndisp)) {
|
||||
ret = PTR_ERR(gpiod_ndisp);
|
||||
dev_err(&pdev->dev, "NDISP GPIO request failed (%d)\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_LCD_CLASS_DEVICE
|
||||
lcd_device = lcd_device_register("omapfb", &pdev->dev, NULL,
|
||||
&ams_delta_lcd_ops);
|
||||
|
||||
|
|
|
|||
|
|
@ -10,7 +10,6 @@ config FB_OMAP2_DSS
|
|||
|
||||
config FB_OMAP2_DSS_DEBUG
|
||||
bool "Debug support"
|
||||
default n
|
||||
help
|
||||
This enables printing of debug messages. Alternatively, debug messages
|
||||
can also be enabled by setting CONFIG_DYNAMIC_DEBUG and then setting
|
||||
|
|
@ -19,7 +18,6 @@ config FB_OMAP2_DSS_DEBUG
|
|||
config FB_OMAP2_DSS_DEBUGFS
|
||||
bool "Debugfs filesystem support"
|
||||
depends on DEBUG_FS
|
||||
default n
|
||||
help
|
||||
This enables debugfs for OMAPDSS at <debugfs>/omapdss. This enables
|
||||
querying about clock configuration and register configuration of dss,
|
||||
|
|
@ -28,7 +26,6 @@ config FB_OMAP2_DSS_DEBUGFS
|
|||
config FB_OMAP2_DSS_COLLECT_IRQ_STATS
|
||||
bool "Collect DSS IRQ statistics"
|
||||
depends on FB_OMAP2_DSS_DEBUGFS
|
||||
default n
|
||||
help
|
||||
Collect DSS IRQ statistics, printable via debugfs.
|
||||
|
||||
|
|
@ -45,7 +42,6 @@ config FB_OMAP2_DSS_DPI
|
|||
config FB_OMAP2_DSS_RFBI
|
||||
bool "RFBI support"
|
||||
depends on BROKEN
|
||||
default n
|
||||
help
|
||||
MIPI DBI support (RFBI, Remote Framebuffer Interface, in Texas
|
||||
Instrument's terminology).
|
||||
|
|
@ -73,7 +69,6 @@ config FB_OMAP4_DSS_HDMI
|
|||
|
||||
config FB_OMAP5_DSS_HDMI
|
||||
bool "HDMI support for OMAP5"
|
||||
default n
|
||||
select FB_OMAP2_DSS_HDMI_COMMON
|
||||
help
|
||||
HDMI Interface for OMAP5 and similar cores. This adds the High
|
||||
|
|
@ -82,7 +77,6 @@ config FB_OMAP5_DSS_HDMI
|
|||
|
||||
config FB_OMAP2_DSS_SDI
|
||||
bool "SDI support"
|
||||
default n
|
||||
help
|
||||
SDI (Serial Display Interface) support.
|
||||
|
||||
|
|
@ -91,7 +85,6 @@ config FB_OMAP2_DSS_SDI
|
|||
|
||||
config FB_OMAP2_DSS_DSI
|
||||
bool "DSI support"
|
||||
default n
|
||||
help
|
||||
MIPI DSI (Display Serial Interface) support.
|
||||
|
||||
|
|
|
|||
|
|
@ -239,7 +239,7 @@ static int p9100_ioctl(struct fb_info *info, unsigned int cmd,
|
|||
|
||||
static void p9100_init_fix(struct fb_info *info, int linebytes, struct device_node *dp)
|
||||
{
|
||||
strlcpy(info->fix.id, dp->name, sizeof(info->fix.id));
|
||||
snprintf(info->fix.id, sizeof(info->fix.id), "%pOFn", dp);
|
||||
|
||||
info->fix.type = FB_TYPE_PACKED_PIXELS;
|
||||
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
|
||||
|
|
|
|||
|
|
@ -405,9 +405,6 @@ static int pxa168fb_set_par(struct fb_info *info)
|
|||
struct fb_var_screeninfo *var = &info->var;
|
||||
struct fb_videomode mode;
|
||||
u32 x;
|
||||
struct pxa168fb_mach_info *mi;
|
||||
|
||||
mi = dev_get_platdata(fbi->dev);
|
||||
|
||||
/*
|
||||
* Set additional mode info.
|
||||
|
|
|
|||
|
|
@ -106,11 +106,11 @@ int sbusfb_ioctl_helper(unsigned long cmd, unsigned long arg,
|
|||
struct fbtype __user *f = (struct fbtype __user *) arg;
|
||||
|
||||
if (put_user(type, &f->fb_type) ||
|
||||
__put_user(info->var.yres, &f->fb_height) ||
|
||||
__put_user(info->var.xres, &f->fb_width) ||
|
||||
__put_user(fb_depth, &f->fb_depth) ||
|
||||
__put_user(0, &f->fb_cmsize) ||
|
||||
__put_user(fb_size, &f->fb_cmsize))
|
||||
put_user(info->var.yres, &f->fb_height) ||
|
||||
put_user(info->var.xres, &f->fb_width) ||
|
||||
put_user(fb_depth, &f->fb_depth) ||
|
||||
put_user(0, &f->fb_cmsize) ||
|
||||
put_user(fb_size, &f->fb_cmsize))
|
||||
return -EFAULT;
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -125,10 +125,10 @@ int sbusfb_ioctl_helper(unsigned long cmd, unsigned long arg,
|
|||
unsigned int index, count, i;
|
||||
|
||||
if (get_user(index, &c->index) ||
|
||||
__get_user(count, &c->count) ||
|
||||
__get_user(ured, &c->red) ||
|
||||
__get_user(ugreen, &c->green) ||
|
||||
__get_user(ublue, &c->blue))
|
||||
get_user(count, &c->count) ||
|
||||
get_user(ured, &c->red) ||
|
||||
get_user(ugreen, &c->green) ||
|
||||
get_user(ublue, &c->blue))
|
||||
return -EFAULT;
|
||||
|
||||
cmap.len = 1;
|
||||
|
|
@ -165,13 +165,13 @@ int sbusfb_ioctl_helper(unsigned long cmd, unsigned long arg,
|
|||
u8 red, green, blue;
|
||||
|
||||
if (get_user(index, &c->index) ||
|
||||
__get_user(count, &c->count) ||
|
||||
__get_user(ured, &c->red) ||
|
||||
__get_user(ugreen, &c->green) ||
|
||||
__get_user(ublue, &c->blue))
|
||||
get_user(count, &c->count) ||
|
||||
get_user(ured, &c->red) ||
|
||||
get_user(ugreen, &c->green) ||
|
||||
get_user(ublue, &c->blue))
|
||||
return -EFAULT;
|
||||
|
||||
if (index + count > cmap->len)
|
||||
if (index > cmap->len || count > cmap->len - index)
|
||||
return -EINVAL;
|
||||
|
||||
for (i = 0; i < count; i++) {
|
||||
|
|
|
|||
|
|
@ -848,9 +848,7 @@ SiS_PanelDelay(struct SiS_Private *SiS_Pr, unsigned short DelayTime)
|
|||
SiS_DDC2Delay(SiS_Pr, 0x4000);
|
||||
}
|
||||
|
||||
} else if((SiS_Pr->SiS_IF_DEF_LVDS == 1) /* ||
|
||||
(SiS_Pr->SiS_CustomT == CUT_COMPAQ1280) ||
|
||||
(SiS_Pr->SiS_CustomT == CUT_CLEVO1400) */ ) { /* 315 series, LVDS; Special */
|
||||
} else if (SiS_Pr->SiS_IF_DEF_LVDS == 1) { /* 315 series, LVDS; Special */
|
||||
|
||||
if(SiS_Pr->SiS_IF_DEF_CH70xx == 0) {
|
||||
PanelID = SiS_GetReg(SiS_Pr->SiS_P3d4,0x36);
|
||||
|
|
|
|||
|
|
@ -667,9 +667,9 @@ static int ssd1307fb_probe(struct i2c_client *client,
|
|||
|
||||
if (par->reset) {
|
||||
/* Reset the screen */
|
||||
gpiod_set_value(par->reset, 0);
|
||||
gpiod_set_value_cansleep(par->reset, 0);
|
||||
udelay(4);
|
||||
gpiod_set_value(par->reset, 1);
|
||||
gpiod_set_value_cansleep(par->reset, 1);
|
||||
udelay(4);
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -916,8 +916,6 @@ static int dlfb_ops_open(struct fb_info *info, int user)
|
|||
|
||||
dlfb->fb_count++;
|
||||
|
||||
kref_get(&dlfb->kref);
|
||||
|
||||
if (fb_defio && (info->fbdefio == NULL)) {
|
||||
/* enable defio at last moment if not disabled by client */
|
||||
|
||||
|
|
@ -940,14 +938,17 @@ static int dlfb_ops_open(struct fb_info *info, int user)
|
|||
return 0;
|
||||
}
|
||||
|
||||
/*
|
||||
* Called when all client interfaces to start transactions have been disabled,
|
||||
* and all references to our device instance (dlfb_data) are released.
|
||||
* Every transaction must have a reference, so we know are fully spun down
|
||||
*/
|
||||
static void dlfb_free(struct kref *kref)
|
||||
static void dlfb_ops_destroy(struct fb_info *info)
|
||||
{
|
||||
struct dlfb_data *dlfb = container_of(kref, struct dlfb_data, kref);
|
||||
struct dlfb_data *dlfb = info->par;
|
||||
|
||||
if (info->cmap.len != 0)
|
||||
fb_dealloc_cmap(&info->cmap);
|
||||
if (info->monspecs.modedb)
|
||||
fb_destroy_modedb(info->monspecs.modedb);
|
||||
vfree(info->screen_base);
|
||||
|
||||
fb_destroy_modelist(&info->modelist);
|
||||
|
||||
while (!list_empty(&dlfb->deferred_free)) {
|
||||
struct dlfb_deferred_free *d = list_entry(dlfb->deferred_free.next, struct dlfb_deferred_free, list);
|
||||
|
|
@ -957,40 +958,13 @@ static void dlfb_free(struct kref *kref)
|
|||
}
|
||||
vfree(dlfb->backing_buffer);
|
||||
kfree(dlfb->edid);
|
||||
usb_put_dev(dlfb->udev);
|
||||
kfree(dlfb);
|
||||
|
||||
/* Assume info structure is freed after this point */
|
||||
framebuffer_release(info);
|
||||
}
|
||||
|
||||
static void dlfb_free_framebuffer(struct dlfb_data *dlfb)
|
||||
{
|
||||
struct fb_info *info = dlfb->info;
|
||||
|
||||
if (info) {
|
||||
unregister_framebuffer(info);
|
||||
|
||||
if (info->cmap.len != 0)
|
||||
fb_dealloc_cmap(&info->cmap);
|
||||
if (info->monspecs.modedb)
|
||||
fb_destroy_modedb(info->monspecs.modedb);
|
||||
vfree(info->screen_base);
|
||||
|
||||
fb_destroy_modelist(&info->modelist);
|
||||
|
||||
dlfb->info = NULL;
|
||||
|
||||
/* Assume info structure is freed after this point */
|
||||
framebuffer_release(info);
|
||||
}
|
||||
|
||||
/* ref taken in probe() as part of registering framebfufer */
|
||||
kref_put(&dlfb->kref, dlfb_free);
|
||||
}
|
||||
|
||||
static void dlfb_free_framebuffer_work(struct work_struct *work)
|
||||
{
|
||||
struct dlfb_data *dlfb = container_of(work, struct dlfb_data,
|
||||
free_framebuffer_work.work);
|
||||
dlfb_free_framebuffer(dlfb);
|
||||
}
|
||||
/*
|
||||
* Assumes caller is holding info->lock mutex (for open and release at least)
|
||||
*/
|
||||
|
|
@ -1000,10 +974,6 @@ static int dlfb_ops_release(struct fb_info *info, int user)
|
|||
|
||||
dlfb->fb_count--;
|
||||
|
||||
/* We can't free fb_info here - fbmem will touch it when we return */
|
||||
if (dlfb->virtualized && (dlfb->fb_count == 0))
|
||||
schedule_delayed_work(&dlfb->free_framebuffer_work, HZ);
|
||||
|
||||
if ((dlfb->fb_count == 0) && (info->fbdefio)) {
|
||||
fb_deferred_io_cleanup(info);
|
||||
kfree(info->fbdefio);
|
||||
|
|
@ -1013,8 +983,6 @@ static int dlfb_ops_release(struct fb_info *info, int user)
|
|||
|
||||
dev_dbg(info->dev, "release, user=%d count=%d\n", user, dlfb->fb_count);
|
||||
|
||||
kref_put(&dlfb->kref, dlfb_free);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -1172,6 +1140,7 @@ static struct fb_ops dlfb_ops = {
|
|||
.fb_blank = dlfb_ops_blank,
|
||||
.fb_check_var = dlfb_ops_check_var,
|
||||
.fb_set_par = dlfb_ops_set_par,
|
||||
.fb_destroy = dlfb_ops_destroy,
|
||||
};
|
||||
|
||||
|
||||
|
|
@ -1615,12 +1584,13 @@ success:
|
|||
return true;
|
||||
}
|
||||
|
||||
static void dlfb_init_framebuffer_work(struct work_struct *work);
|
||||
|
||||
static int dlfb_usb_probe(struct usb_interface *intf,
|
||||
const struct usb_device_id *id)
|
||||
{
|
||||
int i;
|
||||
const struct device_attribute *attr;
|
||||
struct dlfb_data *dlfb;
|
||||
struct fb_info *info;
|
||||
int retval = -ENOMEM;
|
||||
struct usb_device *usbdev = interface_to_usbdev(intf);
|
||||
|
||||
|
|
@ -1631,10 +1601,9 @@ static int dlfb_usb_probe(struct usb_interface *intf,
|
|||
goto error;
|
||||
}
|
||||
|
||||
kref_init(&dlfb->kref); /* matching kref_put in usb .disconnect fn */
|
||||
INIT_LIST_HEAD(&dlfb->deferred_free);
|
||||
|
||||
dlfb->udev = usbdev;
|
||||
dlfb->udev = usb_get_dev(usbdev);
|
||||
usb_set_intfdata(intf, dlfb);
|
||||
|
||||
dev_dbg(&intf->dev, "console enable=%d\n", console);
|
||||
|
|
@ -1657,42 +1626,6 @@ static int dlfb_usb_probe(struct usb_interface *intf,
|
|||
}
|
||||
|
||||
|
||||
if (!dlfb_alloc_urb_list(dlfb, WRITES_IN_FLIGHT, MAX_TRANSFER)) {
|
||||
retval = -ENOMEM;
|
||||
dev_err(&intf->dev, "unable to allocate urb list\n");
|
||||
goto error;
|
||||
}
|
||||
|
||||
kref_get(&dlfb->kref); /* matching kref_put in free_framebuffer_work */
|
||||
|
||||
/* We don't register a new USB class. Our client interface is dlfbev */
|
||||
|
||||
/* Workitem keep things fast & simple during USB enumeration */
|
||||
INIT_DELAYED_WORK(&dlfb->init_framebuffer_work,
|
||||
dlfb_init_framebuffer_work);
|
||||
schedule_delayed_work(&dlfb->init_framebuffer_work, 0);
|
||||
|
||||
return 0;
|
||||
|
||||
error:
|
||||
if (dlfb) {
|
||||
|
||||
kref_put(&dlfb->kref, dlfb_free); /* last ref from kref_init */
|
||||
|
||||
/* dev has been deallocated. Do not dereference */
|
||||
}
|
||||
|
||||
return retval;
|
||||
}
|
||||
|
||||
static void dlfb_init_framebuffer_work(struct work_struct *work)
|
||||
{
|
||||
int i, retval;
|
||||
struct fb_info *info;
|
||||
const struct device_attribute *attr;
|
||||
struct dlfb_data *dlfb = container_of(work, struct dlfb_data,
|
||||
init_framebuffer_work.work);
|
||||
|
||||
/* allocates framebuffer driver structure, not framebuffer memory */
|
||||
info = framebuffer_alloc(0, &dlfb->udev->dev);
|
||||
if (!info) {
|
||||
|
|
@ -1706,17 +1639,22 @@ static void dlfb_init_framebuffer_work(struct work_struct *work)
|
|||
dlfb->ops = dlfb_ops;
|
||||
info->fbops = &dlfb->ops;
|
||||
|
||||
INIT_LIST_HEAD(&info->modelist);
|
||||
|
||||
if (!dlfb_alloc_urb_list(dlfb, WRITES_IN_FLIGHT, MAX_TRANSFER)) {
|
||||
retval = -ENOMEM;
|
||||
dev_err(&intf->dev, "unable to allocate urb list\n");
|
||||
goto error;
|
||||
}
|
||||
|
||||
/* We don't register a new USB class. Our client interface is dlfbev */
|
||||
|
||||
retval = fb_alloc_cmap(&info->cmap, 256, 0);
|
||||
if (retval < 0) {
|
||||
dev_err(info->device, "cmap allocation failed: %d\n", retval);
|
||||
goto error;
|
||||
}
|
||||
|
||||
INIT_DELAYED_WORK(&dlfb->free_framebuffer_work,
|
||||
dlfb_free_framebuffer_work);
|
||||
|
||||
INIT_LIST_HEAD(&info->modelist);
|
||||
|
||||
retval = dlfb_setup_modes(dlfb, info, NULL, 0);
|
||||
if (retval != 0) {
|
||||
dev_err(info->device,
|
||||
|
|
@ -1760,10 +1698,16 @@ static void dlfb_init_framebuffer_work(struct work_struct *work)
|
|||
dev_name(info->dev), info->var.xres, info->var.yres,
|
||||
((dlfb->backing_buffer) ?
|
||||
info->fix.smem_len * 2 : info->fix.smem_len) >> 10);
|
||||
return;
|
||||
return 0;
|
||||
|
||||
error:
|
||||
dlfb_free_framebuffer(dlfb);
|
||||
if (dlfb->info) {
|
||||
dlfb_ops_destroy(dlfb->info);
|
||||
} else if (dlfb) {
|
||||
usb_put_dev(dlfb->udev);
|
||||
kfree(dlfb);
|
||||
}
|
||||
return retval;
|
||||
}
|
||||
|
||||
static void dlfb_usb_disconnect(struct usb_interface *intf)
|
||||
|
|
@ -1791,20 +1735,9 @@ static void dlfb_usb_disconnect(struct usb_interface *intf)
|
|||
for (i = 0; i < ARRAY_SIZE(fb_device_attrs); i++)
|
||||
device_remove_file(info->dev, &fb_device_attrs[i]);
|
||||
device_remove_bin_file(info->dev, &edid_attr);
|
||||
unlink_framebuffer(info);
|
||||
}
|
||||
|
||||
usb_set_intfdata(intf, NULL);
|
||||
dlfb->udev = NULL;
|
||||
|
||||
/* if clients still have us open, will be freed on last close */
|
||||
if (dlfb->fb_count == 0)
|
||||
schedule_delayed_work(&dlfb->free_framebuffer_work, 0);
|
||||
|
||||
/* release reference taken by kref_init in probe() */
|
||||
kref_put(&dlfb->kref, dlfb_free);
|
||||
|
||||
/* consider dlfb_data freed */
|
||||
unregister_framebuffer(info);
|
||||
}
|
||||
|
||||
static struct usb_driver dlfb_driver = {
|
||||
|
|
|
|||
|
|
@ -170,7 +170,7 @@ struct display_timings *of_get_display_timings(const struct device_node *np)
|
|||
goto entryfail;
|
||||
}
|
||||
|
||||
pr_debug("%pOF: using %s as default timing\n", np, entry->name);
|
||||
pr_debug("%pOF: using %pOFn as default timing\n", np, entry);
|
||||
|
||||
native_mode = entry;
|
||||
|
||||
|
|
|
|||
|
|
@ -455,7 +455,7 @@ int save_vga(struct vgastate *state)
|
|||
return 0;
|
||||
}
|
||||
|
||||
int restore_vga (struct vgastate *state)
|
||||
int restore_vga(struct vgastate *state)
|
||||
{
|
||||
if (state->vidstate == NULL)
|
||||
return 1;
|
||||
|
|
|
|||
|
|
@ -36,12 +36,9 @@ struct dlfb_data {
|
|||
struct usb_device *udev;
|
||||
struct fb_info *info;
|
||||
struct urb_list urbs;
|
||||
struct kref kref;
|
||||
char *backing_buffer;
|
||||
int fb_count;
|
||||
bool virtualized; /* true when physical usb device not present */
|
||||
struct delayed_work init_framebuffer_work;
|
||||
struct delayed_work free_framebuffer_work;
|
||||
atomic_t usb_active; /* 0 = update virtual buffer, but no usb traffic */
|
||||
atomic_t lost_pixels; /* 1 = a render op failed. Need screen refresh */
|
||||
char *edid; /* null until we read edid from hw or get from sysfs */
|
||||
|
|
|
|||
Loading…
Reference in New Issue